Cv of Shah Alam 15

CV of SHAH Page 1 of 13

Email [email protected] Mobile +65 8427 6636 / +9199 1639 7739

Name SHAH ALAM

Date of Birth 24/6/1959 Tertiary Education Bachelor of Engineering ( First Class ) - NIT Trichy ( REC )

University of Madras 1982 Studied Master of Science, Singapore Nanyang Technological University,

Email [email protected] Mobile +65 8427 6636 / +9199 1639 7739 Languages Known English, Hindi, Tamil Urdu, & Bahasha Indonesia Experience Total ( Oil & Gas and Power) 27 Years Project Management 16 Years General /Operation Management 5 Years PORTFOLIOS HANDLED

Business Development Proposal / Bidding / Tender Management Engineering Management Procurement Heading Project Group Operation Management (KPI, HR , IT, HSE & QA) Quality Assurance Contract Management Interface Management ( Client / Vendors / Internal )

EMPLOYMENT HISTORY 02/2013 – 08/2014 PT. TECHNIP Indonesia Branch Manager (Balikpapan) 09/2007 – Jan 2013 TECHNIP Engineering Thailand Project Manager Client : Chevron Various Offshore Platforms -Brownfield 09/2005 – 09/2007 PT. TECHNIP Indonesia Project Engineering Manager Client : CONOCO Phillips North Belut - CPP Project (Greenfield) 05/2005 – 08/2005 AMEC, Jakarta, Indonesia Project Manager

Client :TOTAL Tambora GTS 2X 03/2002 – 04/2003 Prosafe Production, Singapore Project Engineering Manager

Client : AGIP ENI, Italy (ABO-FPSO) 09/2000 – 09/2001 Crockett International, Singapore Technical Manager

Client : Hyundai 05/1999 – 03/2000 Elcomp Technologies, Singapore General Manager Client : Hindustan Aeronautical 05/1998 – 04/1999 Tyco International, Singapore Project Manager (Fire & Gas) Client : Premier Oil 02/1997 – 02/1998 Sing Soft Management, Singapore General Manager 01/1996 – 01/1997 Apoofesspoint Pte. Ltd Client : Singapore Telecom Proj Manager 08/1991 – 01/1995 Fichtner Consulting Engineers Project Manager (Power Projects) 09/1989 – 06/1991 Sogex International, Oman Sr. Electrical Engineer (Gas Turbines) 12/1986 – 07/1989 SWCC, Jeddah, Saudi Arabia Project Engineer ( RO Plant) 08/1983 – 12/1986 Dept. of Atomic Energy, India Scientist C-Fast Breeder Test Reactor

IGC for Atomic Research In charge of CDPS in FBTR



Last Position held as Technip Branch Manager managing 120 staff In-charge of Business Development,

Engineering, Projects , HSE, QA/QC, & IT

•Managing & Recruiting staffs ( Engineers, & Support Staff) •Managing office operations & Client needs •Risk Evaluation & Mitigation •Planning & Managing QA/QC and HSE requirements •Review of tender documents and legal contracts •Preparation and submission of commercial and technical proposals, and negotiation of contracts. •Setting KPI for branch office & departments and follow-ups. •Planning & Budgeting & invoicing clients •Participates in employee performance evaluations •Arranging training for the staff according to the need. •Accountable and Responsible for Profit & Loss

Total Experience 27 Years Oil & Gas experience 16 Years FPSO Experience 2 years Project Management Exp 16 Years Technip experience 9 Years

Major Clients served : 5 (ENI, Conoco Phillips, Chevron, TOTAL ) Countries worked : Saudi Arabia, India, Oman, Bangladesh, Thailand Taiwan,

Indonesia UAE and Singapore Team size managed : from 9 to 120 depending on the project size. EPC Projects worked More than a Billion Dollars : TWO

Head of Engineering 50 K to 5 M USD FEED & Detailed Engineering

Head of Projects Managed 1 M USD to 200 M USD Engineering & Procurement

Industries Involved : Engineering and construction assistance for FPSO

Engineering & Procurement for Oil & Gas ( CPP, WHP & GTS ) Design & construction of Nuclear Power Plant Design & Construction of Desalination Plants ( RO + MSF) Field Work Gas turbines Annual Shut Down & Commissioning EPC Experience for LQ from Tender stage to Completion

I have hands on experience in Conceptual design & FEED, Detailed Engineering, Procurement, Expedition, Inspection, FAT, SAT Project & Contract Management , Follow on Engineering Construction & Installation Support



TEAM MANAGEMENT: • Ability to manage multiple teams, guiding and providing solutions • Effectively delegates activities within the team and monitors/reviews all tasks • Tracks and reports team hours and expenses on a weekly basis • Accurately forecasts team utilization and ensure efficiency • Ensures streamlined process and communication between offshore and onsite • Responsible for team members satisfaction and career progression • Manages attrition at lower than the target levels • Constantly reviews performance, identifying training and development needs

CLIENT MANAGEMENT: • Ability to orient and adapt to the client environment quickly and make the

project delivery meet the business objectives • Effectively communicates with client ensuring all commitments made are met

consistently • Manages client expectations and keeps high satisfaction • Ensure all issues are resolved without holding up the project • Manages and communicates difficult/sensitive client situations tactfully

PROJECT MANAGEMENT, Mobilizing Team, Setting Procedures, Manage and lead team of design engineers Design Verification & Validation, Work flow and interfaces, Evaluates risks, Understands contracts / client requirements, Provides Leadership in HSSE and QA/ QC Recognizes the SAFETY issues & HSE Requirement, Managed a few 3rd Party SAFETY Studies for Fire Water Rings Lead & Participated in HAZOP , HAZID , SIL studies and 3D Model Reviews Take care of Management of Change (MOC ) Manage and provide engineering support during the construction phase Develop/improve the execution plans and methodologies required Management of support services to clients and Resource Management. Proactively Team Player with Persuasiveness and Negotiation Skill Selecting & Developing Talent, Empowerment & Delegation, Aligning Performance for Success, Executive Disposition, Driving for Results Wide Exposure in Change Management and ability to do Risk Management. Monitors the closure of all identified risks and opportunities. Timely & effective documents turnover from & to Client & proper project close-out Commitment to customer satisfaction and maintaining project cost control. Manage and coordinate multidiscipline engineering activities to ensure projects such as

Conceptual Studies & FEED (front end engineering design) Engineering Detailed Design & Procurement Preparation of ITB (invitation to bid) Estimate for LSTK (lump sum turnkey) Packages. Tender package preparation

are executed in a safe, efficient, cost effective and timely manner



PROJECT CONTROLS , Planning Schedule, Follow critical paths & Events, Issuing of the 90 days front end project schedule Document Control, Progress Monitoring & Reporting Monthly & Weekly Cost Estimation, Budget Control, Monitoring of forecast cost expenditures , detailed cost report Monthly report (PMR) includes cost Man hours HSE etc.

SUB-CONTRACT MANAGEMENT for various projects in Oil and Gas (FPSO, CPP. WHP, Living Quarters), Desalination (RO, MSF) and Power Generation Projects

PROPOSAL /TENDER STAGE : •Following up Tenders and attending bid meetings •Understand BID Requirements & Evaluation Criteria •Prepare Bid/NO Bid based on Bid Assessment (Technical Assessment, Risks , Competitors , Resources, potential follow on etc.) •Coordinating the Bidding Team to prepare PEP / PQP / SOW / work Methodologies and complete Bid Document. •Get Clearance from Legal and Head office •Prepare SWOT Analysis (findings based on Technical ,challenges ,Cost ,Quality ,Schedule ,Safety) •Preparing Complete Bid Document as per ITB and take care of timely submission. •Attend Post Tender Negotiation •Attend debriefing meetings & Award meetings

PROJECT EXECUTION STAGE : •Formalize the contract and initiate Kick Off Meeting •Management, control, coordination and supervision services as well as assistance for the assigned project, inclusive of budget formulation, cost control and quality assurance. • Management of support services for supervising and directing engineering, procurement and management of construction contractors • Manage and coordinate multidiscipline engineering activities to ensure projects are executed in a safe, efficient, cost effective and timely manner. • Ensure the project conforms to the client’s approved Basis of Design and all applicable regulatory and code requirements. • Maintains HSE focus within the team to ensure OHSE requirements • Achievement of claims mitigation and claims management if appropriate. • Monitors the closure of all identified risks and opportunities.



CLAIM MANAGEMENT • Processing every claim notifications from the Contractor, recording details

accurately • Obtaining accurate and complete information to proceed with the claim, resolving

any queries • Identifying any reasons why full settlement may not be made and notifying the

Contractor of these • Giving clear guidance to Contractor on any necessary loss mitigation and actions

they need to take to proceed with the claim maintaining the Contract Requirement. • Obtaining any information and/or documentation required to support the claim • Advising the Contractor of any special requirement involved with the claim, where

appropriate • Constantly monitoring the progress of the claim and dealing with any delays • Handling problems or complaints associated with the claim in accordance with

organisation’s procedures • Arranging for settlement of the claim with the approval of Project Director • Taking appropriate action where ambiguous claim, or claim for incomplete job is

suspected • Compliance with Contract requirements, industry regulations, organisational

policies and professional ethics • Offer guidance which will provide the best outcome for the Contractor, maintaining

contractual requirements, loss mitigation and prospects of recovery etc • Negotiate settlement of the claim in the best interests of Contractor and

organisation if any dispute. • If any unsolved dispute , discuss the matter with legal counsel and aid them in

pursuing the litigation

MANAGED THE FOLLOWING ENGINEERING MULTI-DISCIPLINE PROJECTS (MAJOR)

• Electrification of Zakum west & central Complexes for ADMA OPCO Abu Dhabi • New Moragot Hub Platform ( Green Field) Chevron Thailand • DeBottlenecking & Upgrading of SATUN Platform Chevron • Modification of Erawan & Jakarawan Platforms ( Brown Field) Chevron • Revamping of Bekapai , Pecico, Sisinubi Platforms ( Brown field ) TOTAL • New ConocoPhillips North Belut Project. ( Green Field) Indonesia • Grey Wariar FPSO ABO Field ( Green Field) for AGIP Eni, Nigeria

CARRIED OUT FEED FOR THE FOLLOWING PROJECTS • CNG Filling station for TOTAL at Balikpapan Indonesia includes

preparing preliminary cost estimate and bill of quantities • Additional Booster Compressior Package for Peciko Platform • Managed Complete SAFETY study for the hydraulic analysis of the TLA

SENIPAH Storage Tanks Fire Water System in transient state (during FW consumers’ valves sudden opening/closure, FW pumps start-up…) and to identify any surge effect(s) which could possibly damage this system

• Fire-Fighting System Improvement Study at TLA SENIPAH Storage Tanks.



MANAGED THE FOLLOWING SAFETY STUDY RELATED PROJECTS • Carried out Study for Chevron for Flair & Relief System for various

platforms • PSI (Process Safety Information) VALIDATION and GAP identification

intended to provide employee involved in operating process information to understand the hazard associated with the processes involving regulated substances.

• SIL verification study following Combined PHA/SOA (Process Hazard Analysis / Safety Objective Analysis) Study

• Structural analysis related to Dropped object study in Operating and Installation Scenario for Peciko Platform

CONSTRUCTION ENGINEERING SUPPORT • Providing technical responses to formal or informal site queries, • Providing assistance on material or quality advice for equipment procurement, • Minor research and clarification of design parameters, • Assistance with day to day troubleshooting of equipment problems, • Participation in engineering change reviews or other similar discussions, • Response to queries from Company’s other contractors or Company

departments, which may include the support of Contractor’s specialist sub-contractors and consultants

COURSES ATTENDED

• Management Theory and Practice at Singapore by NTU • Management of Commissioning of Industrial Plant, at Singapore by IEEE • FBTR Scram Logic Training by Dept of Atomic Energy India • DDC Training on RO Plant by Mitsubishi at Jeddah • Satellite Broadcasting & VSAT training at Subic Bay, Philippines. • HIMA PLC control application Training by HIMA Germany at Singapore. • TCP/IP Networking for CCTV Training by PELCO USA at Singapore • ODP Training by Prosafe Production at Singapore • Helicopter Underwater Escape Training (HUET) MOG Industry Thailand • Pulse Safety Behavioral Leadership Training by Technip at Bangkok • Four Days Course on PMP certification earned 40 points

References:

1. Brian Hounsham , Chief Operating Officer Technip Thailand, Email [email protected] Mobile +668 5152 0530

2. R.Senthil Kumar, Head Sub Sea Division, Technip India, Email [email protected] Mobile +917506266979

More detailed CV is give below in a chronological order.



Details of Experience (in a chronological order) 02/2013 – 08/2014 PT TECHNIP Indonesia Branch Manager Client :TOTAL Indonesia / Chevron Indonesia

Project Manager Modification in Various fields in Mahakam Facilities ( Brown Field)

OPERATION MANAGEMENT

• Managing & Recruiting staffs ( Engineers, & Support Staff) • Managing office operations & Client needs • Planning & Managing QA/QC and HSE requirements • Review of tender documents and legal contracts • Preparation and submission of commercial and technical proposals, and negotiation of contracts. • Setting KPI for branch office & departments and follow-ups. • Planning & Budgeting & invoicing clients • Participates in employee performance evaluations • Arranging training for the staff according to the need. • Preparing WPR for the clients & MPR for the head office with PL

• Managing the team including Interface Management • Managing EPC contractor on behalf of the owner • Reviewing and advising on Claims by EPC Contractor • Maintaining Register for all Interface requirements and monitoring • Managing Third Party Inspection Agency (TPA) • Managing Independent Verification Body (IVB) • Negotiating with Contractors & Finalizing them • Coordinating with Vendors and other sub-contractors • Coordinating with Owner Discipline Engineers • Cautiously Implement the MOC (Management of Change) processes • Perform value engineering on studies and projects. • Preparing various reports

ENGINEERING PROJECTS CARRIED OUT

• Managed Complete SAFETY study for the hydraulic analysis of the TLA SENIPAH Storage Tanks Fire Water System in transient state (during FW consumers’ valves sudden opening/closure, FW pumps start-up…) and to identify any surge effect(s) which could possibly damage this system

• Fire-Fighting System Improvement Study at TLA SENIPAH Storage Tanks. • Carried out Study for Chevron for Flair & Relief System for various platforms • PSI (Process Safety Information) VALIDATION and GAP identification intended to provide

employee involved in operating process information to understand the hazard associated with the processes involving regulated substances.

• SIL verification study following Combined PHA/SOA (Process Hazard Analysis / Safety Objective Analysis) Study

• Structural analysis related to Dropped object study in Operating and Installation Scenario for Peciko Platform



• EJECTOR INSTALLATION AT SISI NUBI to boost up gas production from LP Well for certain limited time using Bernoulli’s law allowing LP production enters HP mainstream due to pressure drop of HP mainstream during passing through the venture pipe.

• CNG Filling Station Pre Project STUDY includes preparing preliminary cost estimate and bill of quantities

• Detailed Engineering Services for Replacement of 23km, 14 inch condensate line (main export condensate line in NPU area ) connects NPU to CPU and TRF

• Managing branch office in Balikpapan consisting 80+ engineers • Carrying out detailed design of new Compressor in Peciko Platform • Carrying out Well Connection Brown Field projects for various modifications /upgrading and

new well connection etc. • Carrying out Bekapai phase 2B for new pipelines , debottlenecking and various other

modifications for 4 platforms • BA Platform Modification • BG Platform Extension. • BL Well Connection. • New Pipeline BA – SWPK (Peciko Field) AND New Pipe Line BA - BP • Prepared RFI ( Request for Information ) for Booster Compressor Package • Managing Third Party Inspection Agency (TPA) • Managing Independent Verification Body (IVB)

• 06/2008 – 01/2013 Project Manager in TECHNIP Engineering Thailand

Client : Chevron Thailand Exploration & Production Ltd. SATUN , Erawan & Jakarawan Platforms ( Brown Field)

• Carried out detailed design of Instrumentation of DPCU upgrade for SATUN platform • Carried out GAP Analysis for Chevron Platforms in the Gulf of Thailand to effectively

develop and implement tools and guidelines for High Priority Standard validation and verification for gap assessments between the existing facility equipments against Chevron engineering Standards (CES)

• Completed Project Management of Detailed Engineering Design of Blowdown study for the ERPE platform

• Completed FEED for Jakarwan Well Head Modification (Split Flow & Water Injection) Completed FEED for Blowdown study for the ERPE platform

• Completed Project Management of Detailed Engineering Design of 2nd Produced Water Injection Pump for Satun CPP. Scope includes Procurement assistance preparing Work Packages for Shutdowns

• Completed Project Management of Detailed Engineering Design and Procurement of 3rd Fuel Gas Compressor

• Prepared proposals for SIL verification Study for the complete CPP and Gas Detection System for Process facility and successfully obtained the Projects.

• Completed the Project Management of complete FEED and Detailed Engineering Design of condensate stabilization debottlenecking and instrumentation upgrades Project

• Additionally in charge of the following studies • Blow down & Isolation Study • Safety study for Hot Oil Skid Relocation • Modernization of Living Quarters

09/2007 – 06/2008 Client : Chevron Thailand Exploration & Production Ltd.



Project Manager Moragot Hub Platform ( Green Field)

• In charge of Project Management of complete Detailed Engineering Design Project of Hub Platform situated in Moragot field in the gulf of Thailand.

• Supervised the engineering activities of a team of technical personnel comprising of 8 Leads and 27 Engineers.

• Responsibility includes Interface Management with Pipeline Group and Asset group • Co-ordination with Procurement team and Construction team for efficient flow of

Engineering Data 09/2005 – 09/2007 PT. TECHNIP INDONESIA Project Engineering Manager ( E & I ) ConocoPhillips North Belut Project. ( Green Field)

• In charge of Project Management of Electrical, Instruments and Telecom for ConocoPhillips North Belut Project.

• Also in charge of Living Quarters Module 58 POB for CPP, from the conceptual design, tender preparation, Bid evaluation, contract Management etc.

• Supervised the engineering activities of a team of technical personnel for this 120 Thousand Man Hours Detail Engineering, Procurement and Construction Management Project.

• Co-ordinated with the Client and the Construction Contractor for carrying out the Detailed Engineering Work in a smooth manner.

• Preparing Monthly, Quarterly Progress Reports for the Client and the Monthly Man-Hour Reports for the Man-Hour Control internally.

• Organizing inter discipline Meetings for identifying and solving the interface problems • Participated in HAZOP, SIL Verification Study, ALARM Management Workshop • Fully prepared the Complete Bid for Technical & Commercial stage for ConocoPhillips –

North Belut ETSS Project. • Prepared Pre-Bid Engineering work such as Design Verification, Engineering Man-hours /

MTO / Technical Bid analysis for Equipments/Packages and Cost Estimation and compiled the CONOCO North Belut EPC tender ( through PT Gunanusa )

• Prepared Tender document for TOTAL – Peciko Phase 5b EPCI packages and Engineering subcon package to Nisconi.

• In charge of the preparation of all Engineering Services Tenders in the Company for major Oil and Gas clients in Indonesia–Amerada Hess, ConocoPhillips, CNOOC, KUFPEC, PREMIER OIL, SANTOS, TOTAL, & UNOCAL

05/2005 – 08/2005 AMEC, Jakarta

Sr. Project Engineer Client : CALTEX Project : Kullin Pipeline ( Green Field)

Responsibilities : • Design, Detailed Engineering Procurement, of Safety System Panel • Design, Detailed Engineering Telemetry Panel • Assisted in preparing P&ID for Well Test Facility • Prepared Commissioning procedure for the pipeline operation. • Prepared Instruments hook – up and related documents.

Client : TOTAL E&P INDONESIE Project : Tambora Field Development Phase 2 ( Green Field)



Responsibilities: • F & G Safety system Design • Revising Cause & Effect and ESD logic • RFQ preparation for all the instruments. • TBE for all ESD Control Panels for GTS 2X /3/4 • Assisted for Procurement for preparing CBT • Identified Changes in the original Scope of Work. Prepared Project Variation Orders and

received approval from the Client 03/2002 – 04/2003 PROSAFE PRODUCTION PTE. LTD. Project Engineer ( Elect & Inst ) Client : AGIP ENI Project : Grey Wariar FPSO ABO Field ( Green Field) Responsibilities :

• Preparation of Bill of Material for Electrical including Electrical Control System, Development of Electrical Distribution System

• In charge of Integrated Safety systems based on Moore PLC • VSAT system based on Frame relay technology, • Office Network based on Windows 2000 server • Participated in the development of design documents for DCS, ESD, and F&G systems,

Control Philosophy Equipment Specifications ESD Cause & Effect Diagrams Architecture diagrams DCS Functional Specification and diagrams F&G Cause & Effect Diagrams

• Instrument design as per the system philosophy • Inclusion of instruments in the P&ID as per the design • Designing Office Network, VSAT communication with Singapore to FPSO • Supervision & Site Acceptance Testing of VSAT equipments for Voice and Email including

Modem, Multiplexer ODU Stabilized Antenna Controller etc. • Assisted commissioning of Metering Skid with Prover technology. • Tank level measurements and Load Master software • LOOP check of Top side instruments.

09/2000 – 09/2001 CROCKETT INTERNATIONAL Technical Manager

Client : HYUNDAI ENGINEERING LTD. Project : Phirco Gas Station

Responsible: • Design, Procurement, construction of Pelco CCTV System • Carried out FAT in Singapore • Assisted Hyundai for Commissioning • Carried out SAT at Phirco, Pakistan • Review/ Check of PLC System & Security System specifications

05/1999 – 03/2000 ELCOMP TECHNOLOGIES, Singapore Technical Manager - Electrical



Client : Hindustan Aeronautical Ltd. Responsibilities :

• In charge of Procurement of Transformers, MV Switchgears, Motors, HV Cables, MV cables for the clients.

• In charge of TBE and CBT and inspection. • Conducted Vendor co ordination meetings • Preparation and utilization of cost data, preparing estimates, and comparative design studies,

detailed budgets and cost plan, bills of quantities and bills of re-measurement. • Negotiation and finalising subcontractor and suppliers claims including bankruptcy of

subcontractors and suppliers. • Advising on selection of tenders and contractual qualifications, project cost control, interim

valuations. Negotiation on final accounts/claims/contractual issues. • Provide budget information to Contracts Engineers and Purchasing Department to assist in

evaluation of tenders etc.

05/1998 – 04/1999 TYCO INTERNATIONAL, Singapore Project Engineer Client : PREMIER OIL Project :Anoa Offshore Platform ( Green Field)

Responsibilities: • Preparation of ESD Matrix • Building up of Logic Diagram for Fire & Safety. • Design and installation of PLC based F&G system. • Digitizing new Instrument loop diagrams for every design package to detail interconnection

of control system component and facilitate testing of each loop during construction and maintenance.

• Shows field mounted instrument, Junction boxes with terminals, multi cores, panel terminals, back panel instrument front panel of instruments, rack terminals and marshalling boxes

• Design cable and conductor layouts for all equipment and ensures that necessary fittings and materials are specified on all classifies areas.

Client : PETRO VIETNAM Project : Phumy Gas Station ( Green Field) Responsibilities:

• Complete design, procurement, construction of PLC panel • Commissioning of F&G panel & Testing. • Carried out FAT • Designing & implementation of HMI using WIZCON • Implementation of logic as per the client given C&E matrix • Reporting to the Executive Director – this Position is Responsible for the Leadership of the

Division's Engineering and Design Activities in Metering Skid, Oil & Gas Plant Projects, • Provision of Engineering Services to Oil & Gas Projects • Responsible for the Budgeting, Planning, Design, Specification and Contract management of

Metering Skid Retrofit Projects. • Responsible for the Supervision and Coordination of Contractor's during the commissioning

and Initial Operational Phases of the Metering Skid 01/1996 – 01/1997 APOOFEZZPOINT PTE. LTD, Singapore Project Manager



Client SINGAPORE TELECOM Project Communication Hub for TV Broadcasters Responsibilities:

• Engineering & Contract Management • Coordinate all engineering efforts for Conceptual Design Development • Actively participated in the design review on the expansion program of the Telecom

Broadcasting HUB facilities to cater for the future demand 08/1991 – 11/1995 FICHTNER CONSULTING ENGRS INDIA Project Manager Client BONGAIGAUN REFINERY AND PETROCHEMICALS LTD. Project Refinery’s CPP ( Brown Field) Responsibilities:

• Installation & Commissioning of Honeywell TDCS3000 • Modernization and revamping of Instrumentation of CPP • Responsible for the preparation of all deliverables such as: • Instrument Location plan, • Cable Schedule, Junction box termination, Instrument loop diagram, etc. • Checking all vendor equipment that need to be wired • Study and ensure that all necessary wiring is connected to main DCS

Client GUJARATH INDUSTRIAL POWER CO. LTD. Project Gujarath CC PP Responsibilities:

• Preparation of Technical Specification for the C & I. • Preparation of PERT using MS Project. • Coordinate all discipline for the interference of the location of Instrument. • Working on all the vendor print document to ensure all the input in the PDS are matching

with the instrument purchased. • Perform a field survey together with the lead engineer to ensure that the location of offline

instrument doesn’t block any access to any other equipment and in the proper operating and accessible location

• Preparation of all loop template to be used for generation of loop diagram Client SERVALL ENGINEERING Project 5MW CPP Responsibilities:

• Design of Complete Instrumentation & Detailed design of PLC logic. • Developing Detailed Design Drawings for Construction And Commissioning • Typical Drawings Being: Control System Block Diagrams, • Connection Wiring Diagrams, Instrument Location Plans, • Instrument Loop Diagrams, Instrument Hook-Up Diagrams,



• Layout Of Instrument Cables (Above ground And Underground) • Layout Of Instrument Cable Trunking, & Instrument Air Supply • Electrical Instrument Installation Detail, • Cable & Conduct Schedule & Instrument Nameplate Schedules • Coordination With Other Disciplines For Interfacing Design Works • Prepare Material Take-Off For Project Material Purchase Requisitions

09/1989 – 06/1991 SOGEX INTERNATIONAL, Oman Electrical Engineer Client GHUBRA GAS TURBINE POWER PLANT Project Gas Turbines Responsibilities:

• Commissioning and troubleshooting of SPEEDTRONICS • Maintenance of Electrical Switch Gears & MCCs • Preparation of technical procurement specification, Offer evaluation, Technical Bid Analysis

and Vendor drawing review for Power & Distribution transformer, Auto Transformer, HT & LT motor, HT & LT cable, DG set, LT & HT switchgear, HT & LT busduct.

• Maintenance of Battery & Charger, Lighting and Power panel, local push button station, capacitor bank, UPS, lighting fixture, Lighting poles, High Masts, Cable trays, Fire detection & alarm system, Plant communication and Paging system, MMI system

• Overhauling of instruments & SPEEDTRONICS for GE frame 5 & 6 • Overhauling of Protection Relays & Generator protection system • Loop checking and Site Assistance for pre-commissioning • Close liaison with the procurement department and planning department for plant and

equipment “required on site” dates • Preparation of Maintenance Schedule for, SPEEDTRONIC, Instruments, MCC, Generator

distribution transformers, HT/LT switchgear, in line with the manufacturers recommendation.

12/1986 – 07/1989 SWCC, Jeddah -- Project : Jeddah RO Plant Graduate Engineer (Reverse Osmosis Plant)

Responsibilities: • Commissioning of Mitsubishi DDC System • Planning maintenance strategy for plant instruments • Involved in Design works for SCECO (Saudi Consolidated Electric Company) projects. • Assistance for Electrical works including continuity checking, Charging of transformers and

switchboards, battery & charger, UPS, No load & full load running of motors. 08/1983 – 12/1986 FBTR, IGCAR, Department of Atomic Energy Computer Engineer (Controls) Project : Fast Breeder Test Reactor Responsibilities:

• Maintenance of the existing Control System based on ECIL 316 • Conceptual design of software for Shut down / Scram logic • Installation & Commissioning of SCADA system • Revamping of Control System with PDP 11/34

Documents

Cv of Shah Alam 15