Embed Size (px)
Citation preview
100 unit part ,Eizaa street Mobile Phones ( Egypt ) : +201002485099 OR +201201254222
Ras Gharib, Red Sea, Egypt E-mail: [email protected]
postal code : 84715 LinkedIn profile link: https://eg.linkedin.com/in/modseibak
Career Objective
An active & ambitious career in position relevant to : > The control engineering ( classical control & intelligent control & industrial automation sections ).
> The fields of industrial electronics, automatic control engineering and instrumentation engineering. > five years engineering experience in Oil and Gas Industry as Instrumentation and Control Engineering
Seeking for career in a well organized and established organization where I can develop expertise and analytical skills.
Personal details
Military service : finished
Marital state : single.
Nationality : Egyptian
Date of birth : 1, June, 1987
Age : 27
Memberships : Member of the Egyptian Engineering Syndicate
Position : instrumentation Engineer. Company : General Petroleum Company ( GPC east desert fields " Egypt ") at instrumentation and control team from 3/3/2010 till now . Part time job : instrumentation project Engineer with Badr petroleum company (BAPETCO / Shell Partner)
, BED 3 western desert Site at ASSIL & KARAM Gas Development project from 16 June 2014 till 15 march 2015
Part time job : instrumentation maintenance Engineer with Amal petroleum company ( AMAPETCO / PICO Energy partner )
, Ras dip fields , oil and gas onshore separation plant from October 2014 till 31 January 2015
University education # Menofia - university
Faculty of electronic engineering in Menouf
B.SC. Of industrial electronics & automatic control engineering
Grade: very good with an honor degree (78.91%)
Graduation project: Information Technology In Industrial Process ( ITIP with SCADA & DCS )
Project degree: Excellent Graduation year: June / 2009
Project lists
Development gas compressor control system Project at General Petroleum Company, Ras gharib fields
( Altronic control panel and its related transmitters )
Modather Mohamed Selem Elsoghaier
One of the team work responsible for a Capital oil and gas project in Egypt , GPC Amer 8 project (approx. 1.5 milliard
Egyptian pounds) Amer 8 offshore Platform and onshore related facilities station with main contractors Design ENPPI and PETROJET for Execution
Development for the DCS control system in the master Sea Water Desalination Plant , GPC ras gharib fields
Change old DCS system ( RS3 system ) by new deltaV DCS system for south bakr crude oil treatment plant ( 40000
BLPD ) GPC , Ras gharib fields
ASSIL & KARAM Gas Development project, Assil & Karm gas wells and related CRP (CO2 Remove Plant) for
Removing CO2 from Gas by Amine , BED 3 BAPETCO/SHELL (approx. 750 million US dollars $ )
Projects activities
Offshore Platform comprehensive ( Fire and Gas Fighting system , Navigation aids system, Chemical injection
skid system, well head control panel ) Onshore Station comprehensive (DCS process control system, shut down control system, firefighting system,
Flare Package system, Separators vessels, Closed drain vessels, Knockout drum vessel, Pressurized Tanks, Central air condition system HVAC , Gas boot system , amine towers , furnace control systems ,gas coolers, heat exchangers, )
Reviewing all revisions ( documents, P&I D, GA : general arrangements, instrument hook–up drawings , FDS:
function design specifications , electrical wiring, cable schedule , purchase order, etc. ) issued by contractors, check sheets depended on the international codes & standards for the owner company such as DEP standard for SHELL .
Responsible for all FAT and SAT Activities, Executing pre Commissioning, Commissioning, and Startup Procedures for all instrumentation systems.
Follow up punish lists and Execute the project progress according to the scope, planning schedule and budget. Coordinate activities and resolve issues among contractors and other parties to allow construction activities to
progress according to plan and the final completion. Manage contractor preparation of detailed design drawings, material specifications and procurement. All jobs done Comply with all Company Health, Safety and Environment as well as Work Permit, Policies and
Safety precautions Managing and Coordinating Manpower Duties for the contractor. Orders and inventory materials installed in the project, Studying and Reviewing 2 years spare parts.
Instrumentation maintenance Activities
Repairing, Calibrating, Maintaining, Replacement Spare parts for all Field Instruments devices & Valves in (Oil
Treatment Plant, Offshore Platforms, Oil Collection Stations, Sea Water Desalination Plant, Fire Fighting Systems, Gas Compressor Plant, Steam Boiler Plant, Oil & Gas Separators).
supervision for control work on DCS control system ( Emerson deltaV ,FOXBORO I/A ,ABB Freelance) and safety shutdown system ESD ( SIS, Trident , Triconex ).
calibration HART and foundation field bus transmitters , installation and Inspection , troubleshoot, and maintenance of its based electronic cards.
Performing the preventive, corrective, troubleshooting, shutdown and major and minor maintenance activities, on various types of instrumentation and control systems, which are used for managing process plant
Organizing and Supervision the new Installation for Instrumentation and Control Systems. Supervise and Trace the operation process Sequence in the Steam Boiler Station, Solving related stuck points
to complete operation process for Boilers. Checking and Inventory the instrument Control material at supplier store based on the packing lists.
Reviewing percentage of executing works and invoices, signing work permits and reports for ended works after ensuring solve outstanding points.
Preparing reports for Daily Work, except repair and calibration reports. Preforming the function of preventive, breakdown, predictive maintenance for reducing machinery downtime
to minimum.
Managing and Coordinating Manpower, Distributing Duties and Responsibility According to Abilities of Team
Work. Coordinate the testing, repairing, calibration and trouble shooting of the Instrumentation Control systems. Troubleshoot, Repair, Calibrate and Test various types of process control instruments which include
pneumatic, electrical and electronic instruments. Preparing job schedule and Evaluate the manpower requirement for daily preventive, breakdown and
shutdown maintenance Perform regular calibration and maintenance of all safety, fire and gas equipment such as gas monitors, H2S
monitors, smoke detectors and heat detectors. Troubleshooting and maintenance of electronics components. Inventory Surplus materials according to purchase orders Comply with all Company Health, Safety and Environment as well as Work Permit, Policies and Procedures.
Languages
Arabic : mother language. English : very good ( spoken / written / reading ).
Computer skills
Microsoft Operating systems (Strong Microsoft Office Package and Windows package skills 8, 7, vista, XP, Me, 2000,
98, 95, doc ).
Skilled in using Matlab & SCADA , PLC softwares . Skilled in software for circuit design and analysis .
Internet skills ( facilities and handling).
Personal skills
The ability to learn new tools, Self-Managed, Highly Motivated and work long time with high efficiency. Excellent communication skills, work in team, making presentation of my ideas . Good knowledge with electrical installation and maintenance in potentially explosive atmospheres
( Ingress protection and EX devices and components ) Strong personality with the ability to work with team group in a challenging environment the ability to work under pressure especially part time jobs in service company the ability to teach fresh graduated engineers and technical effective time management skills. complete hardware installation and maintenance of workstation and PCs .
helpful, flexible and motivated others.
Training
General Petroleum company in RAS GHARIB fields ( in control rooms DCS RS3 in oil separators & treatment Plant,
water treatment, Gas compressors, and turbines ) under faculty training plan.
Training in TOSHIPA factory (Banha) under faculty project plan.
Oil and Gas Skills : programmable logic controller ( PLC ) DCS I/A course from Invensys learning center .
Trident course from Invensys learning center .
HAZOP application in petroleum industry . TE Data : “Modern fiber optic network systems”, (GPON, fiber cables preparing & splicing , connectors termination
& measurments) .
REFRENCES ARE AVAILABLE UPON REQUEST Thank you
