Upload
hathuy
View
216
Download
1
Embed Size (px)
Citation preview
Chemical-Analytical Center consists of:
Mobile Environmental Laboratory (MEL);
Testing Laboratory (Aktau, branch at Tengiz field).
Hydrobiological Laboratory (Almaty, branch at Atyrau city)
Laboratories are accredited in accordance with the «GOST ISO/IEC
17025-2009 - General requirements for competence of testing and
calibration laboratories».
CHEMICAL-ANALYTICAL CENTER
STAFF
The laboratory employs 74 highly qualified specialists : leading chemical
engineer, quality manager, HSE engineer, instrumentation and automation
engineer, chemical engineers, chemists, senior key specialists.
All the specialists have been trained at seminar «GOST ISO/IEC 17025-
2009 - General requirements for competence of testing and calibration
laboratories» and «Features of accreditation of laboratories for ST RK
ISO/IEC 17025-2007. Evaluation of measurement uncertainty».
All engineers, chemists and technicians have been trained at CIKV in Saint-
Petersburg, Russia in methods of work using measuring instruments
produced by «Agilent Technologies».
SCOPE OF ACCREDITATION OF MEL
Objects of analysis:
Sample collection: drinking water, natural water (surface
and groundwater), wastewater (before and after
treatment);
Sample collection: ground (soils and bottom sediments);
Atmospheric air of residential and sanitary protection
zones;
Air of operational areas;
Industrial emissions in the atmosphere;
Emissions from motor vehicles.
Mobile Environmental Laboratory Equipment Gas analyzers GANK-4 (AP) produced by “SPA PRIBOR
“GANK" (Russia)
Gas analyzer Testo-350 manufactured by "TestoAG"
(Germany)
Gas analyzer Testo-350XL manufactured by "TestoAG"
(Germany)
Microclimate parameters measuring device "Meteoskop"
produced by "NTM-Zaschita” (Russia) - 6 units.
Electric and magnetic field parameters measuring device
BE-meter AT-002, "NTM-Zaschita” (Russia)
Electrostatic field tension meter ST-01, "NTM-Zaschita”
(Russia)
Luxmeter "TKA-Lux" STC “TKA” (Russia)
Bellows-sealed aspirators; single- and multi-channel
Dust analyzer DUSTTRAK 8533
SCOPE OF ACCREDITATION OF TL
Natural, drinking and waste water:
Sample collection, total mineralization, pH, fluoride, sulfates, chlorides,
phosphates, nitrates, nitrites, ammonium nitrogen, COD, BOD5, petroleum
products (hydrocarbons), phenol and phenol derivatives, organochlorine
pesticides, volatile organohalogen compounds, heavy metals, surface-active
agents (surfactants), polycyclic aromatic hydrocarbons (PAHs), etc.
Atmospheric air of residential and sanitary protection zones:
Sample collection, meteorological parameters, formaldehyde, phenol, hydrogen sulfide, PAHs, aliphatic and aromatic amines, nitrogen oxide and nitrogen dioxide, methanol, methyl mercaptan, sulfur dioxide, dust, gamma-emitting radionuclides, etc.
Atmospheric air and the air of operational areas:
Ozone, nitrogen oxides, hydrogen sulfide, sulfur dioxide, carbon monoxide, petroleum hydrocarbons (C12-C19), hydrocarbons (methane), methane, methyl mercaptan, ethyl mercaptan, phenols, formaldehyde, synoptic parameters and etc.
SCOPE OF ACCREDITATION OF TL
Soils and bottom sediments:
Sample collection, Granulometric composition, pH (water extract), carbonates
and bicarbonates, sulfates, chlorides, nitrates, calcium, potassium, sodium,
magnesium, hydrogen sulfide, petroleum products (hydrocarbons), phenol and
phenol derivatives, organochlorine pesticides, polychlorinated biphenyls, heavy
metals, polycyclic aromatic hydrocarbons (PAHs), gamma-emitting
radionuclides, etc.
Production facilities of enterprises (workplaces):
Noise, vibration, light, electric field, magnetic flux density, intensity of
electromagnetic field of industrial frequency, intensity of electrostatic field.
TESTING LABORATORY EQUIPMENT Basic equipment :
Gas chromatographs GC Agilent 7890 A
MSD5975C and GC Agilent 7890 A ECD and FID,
Chromatec-Crystal 5000
Liquid chromatograph (HPLC Agilent 1200),
AAS with hydride techniques and electrothermal
atomisation produced by Analytic Jena;
Microwave oven for soil and sediments samples preparation produced by Analytic Jena;
Mass spectrometer with inductively coupled plasma (Agilent 7700x ICP-MS),
capillary electrophoresis instrument (Agilent 7100).
TESTING LABORATORY EQUIPMENT Analytical Sieve Shaker АS200 control
(Retsch),
Automatic Titrator 905 Titrando (Metrohm),
Spectrophotometer ПЭ-5300-ВИ,
Spectrophotometers HACH-LANGE
DR/2800
Instrument for water-steam distillation
UDK 129,
Fluid analyzer Anion 4100, etc.
Auxiliary equipment:
Analytical and technical balances, ice baths, sand baths,
ultrasound baths, magnetic stirrers with heater, thermostat,
heating stoves, ovens, heating mantles, laboratory
refrigerators, etc.
Quality Control
Sampling:
Quality of laboratory utensils cleanness (ISO compliance, all containers are
preliminary decontaminated in laboratory, test report is submitted), multiple-
use equipment is decontaminated;
Blind sampling program, rinseate samples, replicate samples, blank sample,
blank transportation sample;
Calibration and adjustment of instruments with use of second source materials
(before and after measurements);
Quality certificates issued by manufacturers of chemical reagents (highly
purified material, reagent-grade, analytical reagent) used for equipment
decontamination or sample preservation;
Strict observance of SOP of sampling and equipment decontamination
(deactivation) between sampling points location;
Quality Control
Laboratory work :
Measuring instruments are registered in the RK Register and calibrated;
Quality Certificates issued by manufacturers of chemical reagents (highly purified
material, reagent-grade, analytical reagent), used for testing;
Ready solvents expiration period shall not be longer than expiry period established
by manufacturer;
Calibration and adjustment of instruments with use of second source materials;
Minimum number of initial calibration points is 5, linearity is determined by R2
factor;
During measurement process one point of calibration curve (median) is checked
every 10 measurements (CCV);
In addition, blank sample (BLK) and laboratory control sample (LCS) are prepared.
Participation in interlaboratory comparison tests and audit from Client
Interlaboratory comparison tests:
April, 2014. LLP «Ecohydrocontrol»
June, 2014. Chemex
2015-2016. LLP «Ecohydrocontrol»
Audits:
May, 2014. NCPOC
August, 2014; June 2016. National Centre of
Accreditation
September, 2014. NCPOC
September, 2014. TCO
The Hydrobiological Laboratory has its subdivisions
in the cities of Almaty and Atyrau.
It has been accredited for compliance with
GOST ISO / IEC 17025-2009
"General requirements for competence
of testing and calibration laboratories”
Accreditation certificate:
№ KZ.I.02.1661 of 03.11.2015.
The scope of accreditation includes:
1. Sampling of surface water, sea bed sediments
and soil.
2. Analyzing and characterization of the following:
Taxonomic composition, abundance and biomass of
phytoplankton, zooplankton, periphyton,
macrozoobenthos and ichthyofauna;
Functional area:
• State environmental monitoring on the shelf of the Caspian
Sea;
• Assessment of the state of bioresources of the Kazakhstani
part of the Caspian Sea;
• Analysis of hydrological regime impact on the ingress of
toxicants in the Irtysh, Ili, Syr-Darya, Tobol, Yesil, Shu and
Talas transboundary rivers and on the formation and
condition of biological resources...;
Orders are fulfilled under contracts with oil companies,
such as NCOC, Caspian Meruerty Operating Company BV,
Kurmangazy Petroleum, Kaztransoil and etc.
13
HYDROBIOLOGICAL LABORATORY
Branch Office in Astana
010000, Astana,
Bigeldinov street, 9/1, Office 2
phone, fax: (7172) 995475, 995478
e-mail: [email protected]
Branch Office in Atyrau
060007, Atyrau, Seifullin street, 5
phone: (7122) 278455, 278453
fax: (7122) 586114
e-mail: [email protected]
Central Office in Almaty
050012, Almaty, Amangeldy street, 70А
phone: (727) 2726450, 2726470, 2726488
fax: (727) 2391049
e-mail: [email protected]
Branch Office in Aktau
130000, Aktau, microdistrict 22
phone: (7292) 606115
fax: (7292) 606110
e-mail: [email protected]
OUR ADDRESSES AND CONTACTS: