Upload
phungdieu
View
214
Download
0
Embed Size (px)
Citation preview
Customer Catalog
2/1/2015
Updated: 5/1/2014Aldora
Aluminum & Glass Products 11500 Miramar Parkway, Ste 300
Miramar, Florida 33025 Phone: (954) 784.6900
Fax: (954) 784.6901
Aldora Aluminum & Glass Products of Charleston
7421 East Spartan Boulevard Charleston, SC 29418 Phone: 800-868-4527
Fax: 800-314-4436
Aluminum and Glass Products
General Terms & Conditions
Page | 1
A. Quotations 1) Prices quoted are good for 60 days after the date stated on the quotation. Aldora reserves the right to adjust pricing after the expiration of the 60 days. 2) Aldora reserves the right to adjust pricing due to errors and/or omissions in items quoted. 3) Quotes are generally for materials and/or assembly only. Aldora is not obligated to supply structural steel, engineering, shop drawings, unless otherwise stated on the quote. 4) Aldora may be asked to do ‘take-offs’ from customer plans in order to provide a quotation for a job. Aldora accepts no responsibility as to the completeness or accuracy of a quotation generated from these ‘take-offs.’ It is the responsibility of the customer to review and approve quotations generated from ‘take-offs’. 5) Aldora does not warrant that quotations will meet all field conditions. It is the responsibility of the customer to insure that products offered will meet their customer’s specifications, including but not limited to; type of closer, wind load requirements, water infiltration requirements, ADA requirements, acoustic and solar values, etc.
B. Orders 1) Minimum Order - $25.00 Product
2) Aldora requires that customers sign their final quotation before it becomes an order. Signatures indicate that the customer has accepted the elevations and dimensions as stated in the quote. 3) Delivery date estimates may be provided to the customer but are in no way a guarantee that deliveries will be made on that date. 4) Lead times for projects involving 3rd party services such as aluminum bending, painting, etc. are beyond the control of Aldora and only estimated delivery dates can be provided.
C. Delivery 1) It is the customer’s responsibility to inspect all items upon delivery. Aldora will not accept responsibility for scratches, breakage or any other damage that occurs to products on the job site after delivery. 2) The customer’s signature or signature of an agent of the customer on the packing list signifies the acceptance of the product by the customer. 3) Failure to accept delivery of an order or an order put on hold after fabrication will result in an added delivery charge or storage fee to the customer.
D. Glass Drop Offs 1) Customers must provide advance notice to Aldora when intending to drop off glass to fabricated or laminated. 2) Aldora does not accept responsibility for customer glass broken during the tempering or laminating process. E. Job Site
1) Aldora is not responsible for items damaged or stolen while at the job site. 2) Aldora is not liable for any back charges passed on to the customer by the contractor.
F. Aluminum Installation 1) Installation is the responsibility of the glazier. 2) Aldora will provide support to glaziers regarding the proper installation of Aldora’s products when requested. 3) It is the responsibility of the glazier to understand the proper installation method for Aldora products and to adhere to the specifications as indicated in the Dade County product approval (NOA) and/or Aldora’s installation instructions. 4) The installer must apply caulking in all joints as required by product specifications. Pre-fabricated and pre-glazed units must be inspected and resealed if necessary in the event that seals have been omitted or damaged in transport.
G. Payment 1) Terms are to be agreed upon before the commencement of the project. If terms are not negotiated in advance, then terms are assumed to be 50% deposit when order is placed and 50% upon delivery. 2) The billing date is considered the date that materials are delivered. Large projects may have multiple bills based on partial deliveries throughout the project. 3) Payment terms supersede draw schedules supplied by the General Contractor. 4) Aldora reserves the right to charge interest for late payments. Interest is to be calculated at 1 1/2% or the maximum percentage allowable by law. 5) Aldora will file liens on properties where payment efforts have not been made. 6) No warranty will be issued for a project until final payment has been cleared.
Aluminum and Glass Products
General Terms & Conditions
Page | 2
G. Credits
1) Credits may be issued to a customer at the discretion of Aldora. 2) Credits will be applied against subsequent orders.
H. Tax Exempt Certificates 1) All customers must be charged state sales tax unless a Tax Exempt Certificate is on file at Aldora. 2) It is the responsibility of the customer to provide a Tax Exempt Certificate prior to any billing taking place. Taxes charged will be the responsibility of the customer to pay if a Certificate is not provided regardless of the customer’s tax exempt status.
I. Cancellations and Returns 1) Orders initiated with 3rd party products (special paint, bending, special glass, etc.) may not be cancelable unless
allowed by 3rd party vendor. Any charges to Aldora in this regard will become the obligation of the customer. 2) Orders initiated in Aldora’s facility may be cancelable at Aldora’s discretion. However, charges for work in
progress and/or re-stocking fees may be applied. 3) Orders canceled will be subject to a re-stocking fee. 4) Product returns are subject to the condition of the product. Custom size products are not returnable.
J. Cut/Fabricated Glass 1) Cut glass is produced to ASTM tolerances including width and height variations. Please see ASTM standards for
Flat Glass, Section 6, Table 1. 2) All fabrication is subject to acceptable tolerances as specified by ASTM for fabricated glass.
k. Laminated Glass 1) Customer understands proper handling of laminated glass or will talk to a representative of Aldora. 2) Customer will not use harsh cleaning chemicals when cleaning laminated glass 3) Aldora assumes no responsibility for the final use of the product or compatibility of materials used. 4) Customer will instruct its customer’s on proper cleaning of laminated glass (GANA) 5) Customer will use proper sealants when applying to laminated glass (approved only) 6) Laminated glass can only be used in systems with a proper weather seal 7) Aldora is not responsible for laminated glass that reacts adversely to installation in a long term, unconditioned
vacant space l. Exports
1) Container arrangements are by the customer. 2) Payment is required prior to release of the container 3) Goods damaged in transit are not the responsibility of Aldora. Items should be insured for shipping. 4) Aldora does not warranty items for export but it may, at its discretion, offer replacement items.
Aluminum and Glass Products
Information
Page | 3
Swing Designations: Entrance Door Handing must be specified as viewed from the outside. Although different window and door segments often use different terminology, Aldora utilizes the HLSO, HRSO identification for doors.
Legend:
*HLSO Hinge Left Swing Out
*HRSO Hinge Right Swing Out LHR Left Hand Reverse RHR Right Hand Reverse RHOS Right Hand Out Swing LHOS Left Hand Out Swing
*Terminology used by Aldora
Glass Dimension Table
Door Variety Single or
Pair Threshold Width Dimension
Frame Width (FW)– Length Dimension
Frame Height (FH)–
McKinley Narrow Stile Single Saddle FW - 8.875” FH - 9.6875”
McKinley Narrow Stile Pair Saddle FW/2 – 7.0625” FH - 9.6875”
MK-2 Single ADA Bumper FW – 11.750” FH – 14.875”
MK-2 Pair ADA Bumper FW/2 – 10.125” FH – 14.875”
K2LM Single ADA Bumper FW – 11.750” FH – 14.875
K2LM Pair ADA Bumper FW/2 – 9.9375” FH – 14.875”
K2 Breeze (Bottom Panel) Single ADA Bumper FW – 11.750” 27.50” fixed height
The following conditions will affect glass dimensions and should be requested from Aldora:
Continuous gear hinge Cladding Transom s Transoms w/ OHCC Threshold variations Custom Astragals
Outswing Doors Right Hand Active Standard
Please mark quotation if left hand is to be active
*HLSO
LHR
RHOS
*HRSO
RHR
LHOS
Aldora-175 Impact Storefront System
List Pricing
Aldora – 175 Fixed Impact System Part
Number Part
Name Mill
Finish White Paint
Clear Anodized
Bronze Anodized
Page | 4
SMI-001 Head,
Jamb & Sill
$242 $304 $280 $320
SMI-002
Glass Stop
$52 $70 $65 $80
SMI-003 Fin Snap $116 $144 $138 $162
SMI-004
Plain Snap
$96 n/a n/a n/a
Available by special order only-not in stock
SMI-033 False Muntin Base
$18 n/a n/a n/a
Available by special order only-not in stock
SMI-034
3/4" Raised False Muntin
$28 $35 $40 $52
Available by special order only-not in stock
SMI-035
1 3/4" Raised False Muntin
$42 $52 $61 $80
Aldora-175 Impact Storefront System
List Pricing
Aldora – 175 Fixed Impact System Part
Number Part
Name Mill
Finish White Paint
Clear Anodized
Bronze Anodized
Page | 5
SMI-099 Special
order. Not in NOA
Corner Post
$354 $438 $400 $447
Aldora-175 Glazing Supplies & Accessories
List Pricing
Aldora – 175 Glazing Supplies & Accessories
Part Number
Part Name Price
Page | 6
SMI-GO1 Glazing Gasket - 500' Roll $300
SMI-GO2 Glazing Tape - 30' Roll $25
SMI-G14 Field Glazing Tape
One Sided ¼” x ½” – 35’ Roll $30
SMI-GO3 Setting Blocks $1.00
SMI-P03 3" Temporary Glass Stop $2.00
ST-1 Steel Reinforcing SMI-175
10' Lengths $280.00
ST-2 Steel Reinforcing K2 Door
10' Lengths $280.00
Aldora-090 Impact/Non-Impact Storefront System
List Pricing
Aldora – 090 Fixed Impact/Non-Impact System
Part Number
Part Name
Mill Finish
White Paint
Clear Anodized
Bronze Anodized
Page | 7
SMI-091 Head, Jamb
& Sill $194 $240 $240 $290
SMI-092 Glass Stop $46 $66 $60 $76
SMI-093 Fin Snap $123 $150 $150 $184
SMI-094 Plain Snap $100 $128 $129 $156
SMI-091 TB
Head, Jamb & Sill
$230 $275 $275 $325
SMI - 093 TB
Fin Snap $160 $188 $188 $220
SMI-094 TB
Plain Snap $138 $163 $163 $184
SMI-095 Reinforcing $334 n/a n/a n/a
Aldora-090 Impact Storefront System
List Pricing
Aldora – 090 Fixed Impact/Non-Impact System
Part Number
Part Name
Mill Finish
White Paint
Clear Anodized
Bronze Anodized
Page | 8
1/4" x 3" Steel bar $125 n/a n/a n/a
SMI-097 Outer Glass
Stop $19 $23 $26 $33
SMI-098
Outside Glazed
Head, Jam & Sill
$174 $216 $216 $261
SMI-098 TB
Outside Glazed
Head, Jam & Sill
$210 $252 $264 $310
SMI-MM001 Special
order. Not in NOA
Monumental Mullion
$444 $552 $488 $535
SMI-MM Clips
Special order. Not
in NOA
Monumental Mullion Clips
$40 n/a n/a n/a
SMI-099 Special
order. Not in NOA
Corner Post $354 $438 $400 $447
Aldora-090 Impact Storefront System Glazing Supplies & Accessories
List Pricing
Aldora – 090 Glazing Supplies and Accessories
Part Number Item Description Price
Page | 9
ST-090A Steel reinforcing $290
SMI-P03 3" Temporary Glass Stop $2
SMI-GO1 (9/16” & 1 5/16”)
Glazing Gasket - 500' Roll $300
SMI-G07
Spacer Gasket – (Creates sealant pocket)
$325
SMI-G08 (1/4” & 1” IG)
Gasket - 1" Insulated Glass $270
SMI-SB04
Setting Block - 1" Insulated, 1 5/16" Insulated Laminated
$1.60
SMI-SB06
Setting Block - 1/4" Tempered, 9/16" Laminated
$1.00
Aldora-FS 300 Front Set Impact Storefront System
List Pricing
Aldora – FS Front Set Storefront System
Part Number
Part Name
Mill Finish
White Paint
Clear Anodized
Bronze Anodized
Page | 10
SMI-311 Head,
Jamb, Sill & Horizontal
$285 $315 $317 $335
SMI-312 Glass Stop $51 $65 $67 $84
SMI-313 Fin Snap $126 $162 $155 $185
SMI-314
Flush Glass Stop
$58 $75 $77 $96
SMI-316 Head,
Jamb, Sill & Horizontal
$280 $310 $312 $330
SMI-317 Fin Snap $114 $147 $138 $164
SMI-318 Head, Jamb
and Sill $304 $348 $358 $423
SMI-319 Intermedia
te Horizontal
$326 $402 $395 $467
SMI-320 Aluminum
Reinforcement - Heavy
$354 $- $- $-
SMI-321 Seamless Mullion
$286 $350 $317 $367
SMI-322
Seamless Fin Snap
$126 $162 $155 $185
Aldora-FS 300 Front Set Impact Storefront System
List Pricing
Aldora – FS Front Set Storefront System
Part Number
Part Name
Mill Finish
White Paint
Clear Anodized
Bronze Anodized
Page | 11
SMI-311 TB
Head, Jamb, Sill & Horizontal
w/ Thermal Break
$275 $346 $316 $360
SMI-313 TB
Fin Snap with
Thermal Break
$160 $197 $189 $220
SMI-094 Plain Snap $100 $- $- $-
SMI-094 TB
Plain Snap $138 $- $- $-
SMI-004 Plain Snap $96 n/a n/a n/a
Aldora-FS 300 Front Set System Glazing Supplies & Accessories
List Pricing
Aldora –FS Glazing Supplies and Accessories
Part Number Item Description Price
Page | 12
ST-FS1 Light Steel Reinforcing $275
ST-FS2 Heavy Steel Reinforcing $508
ST-FS3 Free Stand Jamb Steel Reinforcing $140
SMI-P03 3" Temporary Glass Stop $2
SMI-GO1 (9/16” & 1 5/16”)
Glazing Gasket - 500' Roll $300
SMI-G13 Spacer/retainer gasket, 1000’ roll $370
SMI-SB07 Setting Block - 1 5/16" Insulated
Laminated $1.00
SMI-G03 Setting Block -
9/16" Laminated $1.00
SM-45 Non-Impact Storefront System (1 ¾” x 4 ½”)
List Pricing
SM – 45 Non-Impact Storefront System
Part Number
Part Name
Mill Finish
White Paint
Clear Anodized
Bronze Anodized
Page | 13
SMI - 110 Jamb $138 $190 $180 $208
SMI - 113 Head,
Jamb & Vertical
$147 $195 $185 $225
SMI - 114 Sill $129 $180 $172 $195
SMI - 115 Horizontal $194 $240 $240 $288
SMI-116 Sill Stop $36 $56 $50 $68
SMI-117
Pocket Filler
$54 $80 $72 $92
SMI-118 Flat Filler $41 n/a n/a n/a
SMI-119 Special
order. Not in NOA
Corner Half Flat
$207 $245 $245 $277
SMI-120 Special
order. Not in NOA
Corner Half
w/Pocket $235 $280 $276 $319
SM-45 Non-Impact Storefront System (1 ¾” x 4 ½”)
List Pricing
SM – 45 Non-Impact Storefront System
Part Number
Part Name
Mill Finish
White Paint
Clear Anodized
Bronze Anodized
Page | 14
SMI-121 Special
order. Not in NOA
Corner Half
w/Pocket $235 $280 $276 $319
SMI-122 Sill
Flashing $59 $74 $80 $100
SM-45 Storefront Glazing Supplies & Accessories
List Pricing
SM-45 Glazing Supplies and Accessories
Part Number Item Description Price
Page | 15
SMI-GO4 1/4”
Glazing Glazing Gasket - 300' Roll $340
SMI-G05 3/8”
Glazing Glazing Gasket – 500’ roll $250
ST-3 Steel Reinforcing SMI-45 10' Lengths $200
SMI-GO3 Setting Blocks $1
SM-245 Non-Impact Storefront System (2” x 4 ½”)
List Pricing
SM – 245 Non-Impact Storefront System
Part Number
Part Name
Mill Finish
White Paint
Clear Anodized
Bronze Anodized
Page | 16
SMI - 210 Jamb $160 $198 $200 $243
SMI - 213 Head,
Jamb & Vertical
$173 $215 $216 $261
SMI – 223 Thermal
Break
Head, Jamb & Vertical
N/A $258 $259 $313
SMI - 214 Sill $150 $184 $184 $221
SMI – 224 Thermal
Break Sill N/A $221 $221 $265
SMI - 215 Horizontal $224 $275 $250 $280
SMI – 225 Thermal
Break Horizontal N/A $330 $300 $336
SMI-216 Sill Stop $40 $48 $54 $70
SMI-217
Pocket Filler
$60 $74 $80 $100
SMI – 227 Thermal
Break
Pocket Filler
N/A $89 $96 $120
SMI-118 Flat Filler $41 n/a n/a n/a
SM-245 Non-Impact Storefront System (2” x 4 ½”)
List Pricing
SM – 245 Non-Impact Storefront System
Part Number
Part Name
Mill Finish
White Paint
Clear Anodized
Bronze Anodized
Page | 17
SMI-119 Special
order. Not in NOA
Corner Half Flat
$207 $245 $245 $277
SMI-220 Special
order. Not in NOA
Corner Half
w/Pocket $235 $280 $276 $319
SMI-221 Special
order. Not in NOA
Corner Half
w/Pocket $235 $280 $276 $319
SMI-122 Sill
Flashing $59 $74 $80 $100
SMI-222
Sill Flashing
w/ Thermal
Break
N/A $89 $96 $120
Aldora-245 Storefront Glazing Supplies & Accessories
List Pricing
Aldora-245 Glazing Supplies and Accessories
Part Number Item Description Price
Page | 18
SMI-GO4 1” Glazing
Glazing Gasket - 300' Roll $340
SMI-G15 1/2”
Glazing Glazing Gasket –250 ‘ Roll $390
ST-3 Steel Reinforcing SMI-245 10' Lengths $200
SMI-GO3 Setting Blocks $1.00
Aluminum Tubes & Clip Sash
List Pricing
Aluminum Tubes & Clip Sash Part
Number Part
Name Mill
Finish White Paint
Clear Anodized
Bronze Anodized
Page | 19
SMI-053 1" x 4" $172 $212 $187 $202
SMI-043
3/4" x 4 1/2"
$181 $223 $196 $213
SMI-054 1 3/4" x
4" $198 $245 $215 $233
SMI-042 1 3/4" x 4
1/2" $215 $267 $234 $254
SMI-055 2" x 4" $207 $256 $225 $243
SMI-056 2" x 5" $241 $300 $262 $284
SMI-057 2" x 6" $277 $343 $300 $325
SMI-049 4 1/2" x 4
1/2" $311 $386 $338 $366
Aluminum Tubes & Clip Sash
List Pricing
Aluminum Tubes & Clip Sash Part
Number Part
Name Mill
Finish White Paint
Clear Anodized
Bronze Anodized
Page | 20
1-10 Sets Includes
10 clips / length
SMI-500 Clip Sash (for ¼”)
1" x 1 1/2"
n/a $114 $102 $114
11-20 Sets Includes
10 clips / length
SMI-500 Clip Sash (for ¼”)
1" x 1 1/2"
n/a $109 $98 $109
21+ Sets Includes
10 clips / length
SMI-500 Clip Sash (for ¼”)
1" x 1 1/2"
n/a $103 $93 $103
SMI-500 Clip
$1.50 ea. n/a n/a n/a
SMI-501 Sidelite Head
n/a $160 $160 n/a
SMI-502 Sidelite
Sill n/a $108 $108 n/a
SMI-GO4 1/2”
Glazing
Glazing Gasket - 300' Roll
$340 n/a n/a n/a
SMI-G17 3/8”
Glazing
Glazing Gasket
500’ Roll $328 n/a n/a n/a
MK-2 Medium Stile Impact Door
List Pricing
MK-2 Medium Stile Impact Door
Description White Paint
Clear Anodized
Bronze Anodized
Page | 21
3'0" x 7'0" Standard with Frame $ 2,052 $ 2,052 $ 2,260
3 Stainless Steel Butt Hinges, Standard Pull, Standard Push Bar, 3 Point Lock,
Air Rated Threshold, Assembled by SMIS
Transom (to 10') Add: $ 260 $ 260 $ 260
3'0" x 8'0" Standard with Frame $ 2,146 $ 2,146 $ 2,370
4 Stainless Steel Butt Hinges, Standard Pull, Standard Push Bar, 3 Point Lock,
Air Rated Threshold
Transom (to 10') Add: $ 260 $ 260 $ 260
6'0" x 7'0" Standard with Frame $ 3,566 $ 3,566 $ 3,925
3 Stainless Steel Butt Hinges per leaf, Standard Pull, Standard Push Bar, 3 Point Lock, 2 Point Inactive Lock, Air
Rated Threshold
Transom (to 10') Add: $ 336 $ 336 $ 336
6'0" x 8'0" Standard with Frame $ 3,750 $ 3,750 $ 4,125
4 Stainless Steel Butt Hinges per leaf, Standard Pull, Standard Push Bar, 3 Point Lock, 2 Point Inactive Lock, Air
Rated Threshold
Transom (to 10') Add: $ 336 $ 336 $ 336
K2LM Medium Stile Impact Showroom Door
List Pricing
K2LM Medium Stile Impact Door
Description White Paint
Clear Anodized
Bronze Anodized
Page | 22
3'0" x 7'0" Standard with Frame
3 Stainless Steel Butt Hinges, Standard Pull, Standard Push Bar, 3 Point Lock,
ADA Threshold $ 2,155 $ 2,110 $ 2,380
Width Increased up to 48" $ 70 $ 70 $ 70
Transom (to 10') Add: $ 260 $ 260 $ 260
3'0" x 8'0" Standard with Frame
4 Stainless Steel Butt Hinges, Standard Pull, Standard Push Bar, 3 Point Lock,
ADA Threshold $ 2,254 $ 2,254 $ 2,490
Width Increased up to 48" $ 70.00 $ 70.00 $
70.00
Transom (to 12') Add: $ 286.00 $ 286.00 $
286.00
3'0" x 9'0" Standard with Frame
5 Stainless Steel Butt Hinges, Standard Pull, Standard Push Bar, 3 Point Lock,
ADA Threshold $ 2,367.00 $ 2,367.00 $ 2,610.00
Width Increased up to 48" $ 70.00 $ 70.00 $
70.00
Transom (to 12') Add: $ 260.00 $ 260.00 $
260.00 3'0" x 10'0" Standard with Frame
6 Stainless Steel Butt Hinges, Standard Pull, Standard Push Bar, 3 Point Lock,
ADA Threshold $ 2,486.00 $ 2,486.00 $ 2,740.00
Width Increased up to 48" $ 70.00 $ 70.00 $ 70.00
6'0" x 7'0" Standard with Frame
3 Stainless Steel Butt Hinges, Standard Pull, Standard Push Bar, 3 Point Lock,
ADA Threshold $ 3,923.00 $ 3,923.00 $ 4,320.00
Width Increased up to 96" $ 154.00 $ 154.00 $ 154.00
Transom (to 10') Add: $ 600.00 $ 600.00 $ 600.00
6'0" x 8'0" Standard with Frame
4 Stainless Steel Butt Hinges, Standard Pull, Standard Push Bar, 3 Point Lock,
ADA Threshold $ 4,000.00 $ 4,000.00 $ 4,410.00
Width Increased up to 96" $ 154.00 $ 154.00 $ 154.00
Transom (to 12') Add: $ 572.00 $ 572.00 $ 572.00
6'0" x 9'0" Standard with Frame
5 Stainless Steel Butt Hinges, Standard Pull, Standard Push Bar, 3 Point Lock,
ADA Threshold $ 4,200.00 $ 4,200.00 $ 4,630.00
Width Increased up to 96" $ 154.00 $ 154.00 $ 154.00
Transom (to 12') Add: $ 572.00 $ 572.00 $ 572.00 6'0" x 10'0" Standard with Frame
K2LM Radius Top Medium Stile Impact Door
List Pricing
K2LM Medium Stile Arched Impact Swing Door
Description White Paint
Bronze Powder Coat
Page | 23
6 Stainless Steel Butt Hinges, Standard Pull, Standard Push Bar, 3 Point Lock,
ADA Threshold $ 4,300.00 $ 4,300.00 $ 4,740.00
Width Increased up to 96" $ 154.00 $ 154.00 $ 154.00
3'0" x 7'0" Standard with Frame
3 Stainless Steel Butt Hinges, Standard Pull, Standard Push Bar, 3 Point Lock, ADA
Threshold $ 6,000.00 $ 6,600.00
3'0" x 8'0" Standard with Frame
4 Stainless Steel Butt Hinges, Standard Pull, Standard Push Bar, 3 Point Lock, ADA
Threshold $ 6,150.00 $ 6,765.00
3'0" x 9'0" Standard with Frame
5 Stainless Steel Butt Hinges, Standard Pull, Standard Push Bar, 3 Point Lock, ADA
Threshold $ 6,304.00 $ 6,934.40
6'0" x 7'0" Standard with Frame 3 Stainless Steel Butt Hinges per leaf,
Standard Pull, Standard Push Bar, 3 Point Lock, 2 Point Inactive Lock, ADA Threshold
$ 12,180.00 $ 13,398.00
6'0" x 8'0" Standard with Frame 4 Stainless Steel Butt Hinges per leaf,
Standard Pull, Standard Push Bar, 3 Point Lock, 2 Point Inactive Lock, ADA Threshold
$ 12,486.00 $ 13,734.60
6'0" x 9'0" Standard with Frame
5 Stainless Steel Butt Hinges per leaf, Standard Pull, Standard Push Bar, 3 Point Lock, 2 Point Inactive Lock, ADA Threshold
$ 12,798.00 $ 14,077.80
K2 Summit Outswing Medium Stile Impact Showroom Door
List Pricing
K2 Summit Outswing Medium Stile Impact Door
Description White Paint
Clear Anodized
Bronze Anodized
Page | 24
Standard Hardware:
Standard Pull, Standard Push Bar, 3 Point Lock, ADA Threshold
3'0" x 7'0" Standard with Frame
Standard Hardware plus 3 Stainless Steel Butt Hinges
$ 2,155 $ 2,110 $ 2,380
Width Increased up to 48" $ 70 $ 70 $ 70
Add for 10” bottom rail $ 160 $ 160 $ 160
Transom (to 11') Add: $ 260 $ 260 $ 260
3'0" x 8'0" Standard with Frame
Standard Hardware plus 4 Stainless Steel Butt Hinges
$ 2,254 $ 2,254 $ 2,490
Width Increased up to 48" $ 70 $ 70 $ 70
Add for 10” bottom rail $ 160 $ 160 $ 160
Transom (to 12') Add: $ 286 $ 280 $ 286
3'0" x 9'0" Standard with Frame
Standard Hardware plus 5 Stainless Steel Butt Hinges
$ 2,367 $ 2,367 $ 2,610
Width Increased up to 48" $ 70 $ 70 $ 70
Add for 10” bottom rail $ 160 $ 160 $ 160
Transom (to 12') Add: $ 260 $ 260 $ 260
3'0" x 10'0" Standard with Frame (no transom on 10’ door)
Standard Hardware plus 6 Stainless Steel Butt Hinges
$ 2,486 $ 2,486 $ 2,740
Width Increased up to 48" $ 70 $ 70 $ 70
Add for 10” bottom rail $ 160 $ 160 $ 160
Standard Hardware:
Standard Pull, Standard Push Bar, 3 Point Lock, ADA Threshold
6'0" x 7'0" Standard with Frame
Standard Hardware plus 3 Stainless Steel Butt Hinges
$ 3,923 $ 3,923 $ 4,320
Width Increased up to 96" $ 154 $ 154 $ 154
Add for 10” bottom rail $ 320 $ 320 $ 320
Transom (to 10') Add: $ 600 $ 600 $ 600
6'0" x 8'0" Standard with Frame
Standard Hardware plus 4 Stainless Steel Butt Hinges
$ 4,000 $ 4,000 $ 4,410
Width Increased up to 96" $ 154 $ 154 $ 154
Add for 10” bottom rail $ 320 $ 320 $ 320
Transom (to 12') Add: $ 572 $ 572 $ 572
6'0" x 9'0" Standard with Frame
Standard Hardware plus 5 Stainless Steel Butt Hinges
$ 4,200 $ 4,200.00 $ 4,630.00
Width Increased up to 96" $ 154 $ 154 $ 154
Add for 10” bottom rail $ 320 $ 320 $ 320
Transom (to 12') Add: $ 572 $ 572 $ 572
6'0" x 10'0" Standard with Frame (no transom on 10’ doors)
Standard Hardware plus 6 Stainless Steel Butt Hinges
$ 4,300 $ 4,300 $ 4,740
Width Increased up to 96" $ 154 $ 154 $ 154
Add for 10” bottom rail $ 320 $ 320 $ 320
K2 Summit Inswing Medium Stile Impact Showroom Door
List Pricing
K2 Summit Inswing Medium Stile Impact Door
Description White Paint
Clear Anodized
Bronze Anodized
Page | 25
3'0" x 7'0" Standard with Frame
3 Stainless Steel Butt Hinges, Standard Pull, Standard Push Bar, 3 Point Lock,
ADA Threshold $ 2,286 $2,242 $2,512
Add for 10” bottom rail $ 160 $ 160 $ 160
Transom (to 10' 4”) Add: $ 260 $ 260 $ 260
3'0" x 7’8" Standard with Frame
4 Stainless Steel Butt Hinges, Standard Pull, Standard Push Bar, 3 Point Lock,
ADA Threshold $ 2,386 $ 2,386 $ 2,622
Add for 10” bottom rail $ 160 $ 160 $ 160
Transom (to 11’0”) Add: $ 286 $ 286 $ 286
6'0" x 7'0" Standard with Frame
3 Stainless Steel Butt Hinges, Standard Pull, Standard Push Bar, 3 Point Lock,
ADA Threshold $ 4,187 $ 4,187 $ 4,584
Add for 10” bottom rail $ 320 $ 320 $ 320
Transom (to 10'4”) Add: $ 600 $ 600 $ 600
6'0" x 7’8" Standard with Frame
4 Stainless Steel Butt Hinges, Standard Pull, Standard Push Bar, 3 Point Lock,
ADA Threshold $ 4,264 $ 4,264 $ 4,674
Add for 10” bottom rail $ 320 $ 320 $ 320
Transom (to 11’0”) Add: $ 550 $ 550 $ 550
K2- Breeze Cabana Door & SMK-2 Balcony Swing Door
List Pricing
K2 Breeze & SMK2 Balcony Swing Door
Description White Paint
Clear Anodized
Bronze Anodized
Page | 26
K2 Breeze Cabana Door
3'0" x 7'0" Standard with Frame 3 Stainless Steel Butt Hinges, Single
Hung, Residential Style 3-point Latch Lever Lock or Standard 3-point lock, Air Rated Threshold, Assembled by
Aldora
$ 3,200.00 $ 3,200.00 $ 3,520.00
Add for aluminum panel in the bottom lite $ 210.00 $ 210.00 $ 210.00
3'0" x 8'0" Standard with Frame
4 Stainless Steel Butt Hinges, Single Hung, Residential Style 3-point Latch Lever Lock or Standard 3-point lock, Air Rated Threshold, Assembled by
Aldora
$ 3,264.00 $ 3,264.00 $ 3,590.40
Add for aluminum panel in the bottom lite $ 210.00 $ 210.00
$ 210.00
3'0" x 9'0" Standard with Frame
5 Stainless Steel Butt Hinges, Single Hung, Residential Style 3-point Latch Lever Lock or Standard 3-point lock, Air Rated Threshold, Assembled by
Aldora
$ 3,334.00 $ 3,334.00 $ 3,667.40
Add for aluminum panel in the bottom lite $ 210.00 $ 210.00
$ 210.00
SMK2 Balcony Swing Door
3'0" x 7'0" Standard with Frame 3 Stainless Steel Butt Hinges,
Residential Style 3-point Latch Lever Lock or Standard 3-point lock, Air
Rated Threshold, Assembled by Aldora
$ 2,155.00 $ 2,110.00 $ 2,464.00
Width Increased up to 42" $ 70.00 $ 70.00 $ 70.00
3'0" x 8'0" Standard with Frame
4 Stainless Steel Butt Hinges, Residential Style 3-point Latch Lever
Lock or Standard 3-point lock, Air Rated Threshold, Assembled by Aldora
$ 2,254.00 $ 2,254.00 $ 2,641.10
Width Increased up to 42" $ 70.00 $ 70.00 $ 70.00
3'0" x 9'0" Standard with Frame
5 Stainless Steel Butt Hinges, Residential Style 3-point Latch Lever
Lock or Standard 3-point lock, Air Rated Threshold, Assembled by Aldora
$ 2,367.00 $ 2,367.00 $ 2,774.20
Width Increased up to 42" $ 70.00 $ 70.00 $ 70.00
McKinley Non-Impact Narrow Stile Entrance Door
List Pricing
McKinley Non-Impact Door
Description Door/ Frame
White Paint
Clear Anodized
Bronze Anodized
Page | 27
3'0" x 7'0" Standard with Frame
3 Stainless Steel Butt Hinges, Single Point Lock, Saddle Threshold,
Assembled by Aldora
Door $ 430.00 $ 440.00 $ 470.00
Frame $ 320.00 $ 330.00 $ 350.00
Transom (to 10') Add: $ 110.00 $ 116.00 $ 122.00
2” Door Frame* Add: $ 200.00 $ 200.00 $ 200.00 1” Glazing* Add: No Add for 1” glazing
7” Bottom Rail* Add: $ 150.00 $ 150.00 $ 150.00 3'0" x 8'0" Standard with Frame
3 Stainless Steel Butt Hinges, Single Point Lock, Saddle Threshold,
Assembled by Aldora
Door $ 470.00 $ 488.00 $ 520.00
Frame $ 340.00 $ 374.00 $ 412.00
Transom (to 10') Add: $ 98.00 $ 104.00 $ 110.00
2” Door Frame* Add: $ 200.00 $ 200.00 $ 200.00 1” Glazing* Add: No Add for 1” glazing
7” Bottom Rail* Add: $ 150.00 $ 150.00 $ 150.00
6'0" x 7'0" Standard with Frame
3 Stainless Steel Butt Hinges, Single Point Lock, 2 flush bolts on inactive leaf, Saddle Threshold, Assembled by Aldora
Door $ 860.00 $ 880.00 $ 940.00
Frame $ 360.00 $ 370.00 $ 390.00
Transom (to 10') Add: $ 158.00 $ 164.00 $ 170.00
2” Door Frame* Add: $ 300.00 $ 300.00 $ 300.00 1” Glazing* Add: No Add for 1” glazing
7” Bottom Rail* Add: $ 300.00 $ 300.00 $ 300.00 6'0" x 8'0" Standard with Frame
3 Stainless Steel Butt Hinges, Single Point Lock, 2 flush bolts on inactive leaf, Saddle Threshold, Assembled by Aldora
Door $ 940.00 $ 975.00 $ 1,040.00
Frame $ 390.00 $ 430.00 $ 470.00
Transom (to 10') Add: $ 134.00 $ 140.00 $ 146.00
2” Door Frame* Add: $ 300.00 $ 300.00 $ 300.00 1” Glazing* Add: No Add for 1” glazing
7” Bottom Rail* Add: $ 300.00 $ 300.00 $ 300.00
Optional 3 Point Locking Mechanism to achieve higher loads Add: $ 55.00 $ 55.00 $ 55.00
No NOA or FBC Approval
Denali* Non-Impact Medium Stile Entrance Door *McKinley NOA/FBC
List Pricing
Denali Non-Impact Door
Description Door/ Frame
White Paint
Clear Anodized
Bronze Anodized
Page | 28
3'0" x 7'0" Standard with Frame
3 Stainless Steel Butt Hinges, Single Point Lock, Saddle Threshold,
Assembled by Aldora
Door $ 830.00 $ 840.00 $ 870.00
Frame $ 320.00 $ 330.00 $ 350.00
Transom (to 10') Add: $ 110.00 $ 116.00 $ 122.00
2” Door Frame* Add: $ 200.00 $ 200.00 $ 200.00 1” Glazing* Add: No Add for 1” glazing
7” Bottom Rail* Add: $ 150.00 $ 150.00 $ 150.00 3'0" x 8'0" Standard with Frame
3 Stainless Steel Butt Hinges, Single Point Lock, Saddle Threshold,
Assembled by Aldora
Door $ 875.00 $ 890.00 $ 930.00
Frame $ 340.00 $ 374.00 $ 412.00
Transom (to 10') Add: $ 98.00 $ 104.00 $ 110.00
2” Door Frame* Add: $ 200.00 $ 200.00 $ 200.00 1” Glazing* Add: No Add for 1” glazing
7” Bottom Rail* Add: $ 150.00 $ 150.00 $ 150.00
6'0" x 7'0" Standard with Frame
3 Stainless Steel Butt Hinges, Single Point Lock, 2 flush bolts on inactive leaf, Saddle Threshold, Assembled by Aldora
Door $1,450.00 $ 1,480.00 $ 1,540.00
Frame $ 360.00 $ 370.00 $ 390.00
Transom (to 10') Add: $ 158.00 $ 164.00 $ 170.00
2” Door Frame* Add: $ 300.00 $ 300.00 $ 300.00 1” Glazing* Add: No Add for 1” glazing
7” Bottom Rail* Add: $ 300.00 $ 300.00 $ 300.00 6'0" x 8'0" Standard with Frame
3 Stainless Steel Butt Hinges, Single Point Lock, 2 flush bolts on inactive leaf, Saddle Threshold, Assembled by Aldora
Door $1,540.00 $1,575.00 $ 1,640.00
Frame $ 390.00 $ 430.00 $ 470.00
Transom (to 10') Add: $ 134.00 $ 140.00 $ 146.00
2” Door Frame* Add: $ 300.00 $ 300.00 $ 300.00 1” Glazing* Add: No Add for 1” glazing
7” Bottom Rail* Add: $ 300.00 $ 300.00 $ 300.00
Optional 3 Point Locking Mechanism to achieve higher loads Add: $ 55.00 $ 55.00 $ 55.00
Thresholds, Astragals, Muntins & Covers
List Pricing
Item Description Part
Number Unit Price
Page | 29
Thresholds
36" Saddle Threshold TS-36 Each $ 56.00
72" Saddle Threshold TS-72 Each $ 100.00
36" Standard Threshold (ADA) TB-36 Each $ 68.00
72" Standard Threshold (ADA) TB-72 Each $ 115.00
36" Water rated w/hi rise bumper THB-36 Each $ 120.00
72" Water rated w/hi rise bumper THB-72 Each $ 200.00
Astragals
Flat Astragal with Gasket SMI-069 Each $ 130.00
Flat Astragal w/ Bulb Gasket SMI-058 Each $ 50.00
Flat Astragal w/ Bulb Gasket, Field Applied
SMI-060 Each $ 65.00
Covers
Top rail cover - 36" Lengths SMI-041 Each $ 50.00
Applied Muntins
1” Vertical applied muntin – 144” SMI-061 Each
Mill - $15 Clear - $25 White - $28 Bronze - $30
1” Horizontal applied muntin – 144” (slides under lip of vertical muntin)
SMI-062 Each
Mill - $15 Clear - $25 White - $28 Bronze - $30
Push Bars, Pull Handles, Hinges and Pivots
List Pricing
Item Description Part
Number Unit Price
Page | 30
Pull Handles and Push Bars
10" Tubular offset pull handle - Clear anodized
BF157 - US28
Each $ 58.00
10" Tubular offset pull handle - Bronze anodized
BF157 - 313 Each $ 65.27
33" Tubular push bar - Clear anodized 47 - US28 Each $ 87.50
33" Tubular push bar - Bronze anodized 47 - 313 Each $ 106.75
Hinges & Pivots
Stainless Steel Butt Hinge - Nickel Finish 4001 Per Pair $ 58.00
Stainless Steel Butt Hinge - Bronze Finish 4001 Per Pair $ 58.00
Roton Continuous Hinge - Clear anodized RCH-CL Each $ 280.00
Roton Continuous Hinge - Bronze anodized
RCH-BR Each $ 300.00
Spring Loaded Hinge Each $ 145.11
Offset Pivots – Clear Anodized 4309-CL Each $ 46.40
Offset Pivots – Bronze Anodized 4309-BR Each $ 46.40
Standard (non ADA) CL-3084 Each $ 80.00
Medium Duty CL-3085 Each $ 120.00
Heavy Duty CL-4500 Each $ 160.00
Lock Mechanisms
List Pricing
Item Description Part
Number Unit Price
Page | 31
Overhead Concealed 90° open/no hold open
CL-3000 Each $ 350.00
LCN Surface Mounted Heavy Duty Door Closers
LCN 4041 Each $ 448.00
LCN Surface Mounted Heavy Duty Door Closers
LCN 4040XP
Each $ 560.00
LCN 2030 Overhead Concealed Door Closer
LCN 2030 Each $ 1,274.00
Sargent 281 Power Guide Door Closer S281 Each $ 400.00
Sargent 351 Power Guide Door Closer S351 Each $ 584.00
Drop plate for light duty and medium duty closers
CL-3547CL Each $ 30.00
Drop plate for heavy duty closer CL-4518P Each $ 50.00
Parallel Arm Brackets Specify Medium/Light Duty Or Heavy Duty
CL-3525 Each $ 10.00
Residential Latch Lever 3 Point Assembly
206 - 3P Each $ 400.00
Lock Mechanisms
List Pricing
Item Description Part
Number Unit Price
Page | 32
Key Cylinders (Bronze or Clear) 2602-1CL Each $ 30.00
Thumb turns (Bronze or Clear) 2604 Each $ 30.00
Standard 1-point locking mechanism 1PT
Locking Mechanism
Each $ 50.00
Standard 3-point locking mechanism w/ Rod Extensions and Clips
3PT Locking
Mechanism Each $ 116.00
Standard 2-point locking mechanism 2PT
Locking Mechanism
Each $ 60.00
Face plate (Bronze or Clear) 2334 Each $ 5.00
Flush Bolt (Clear) 2508 Each $ 24.00
Flush Bolt (Bronze) 2508 Each $ 24.00
Lock Mechanisms
List Pricing
Item Description Part
Number Unit Price
Page | 33
Dead Latch 2332 Each $ 54.00
Electric Strike 1001 Each $ 80.00
Dead Latch Lever 5901 Each $ 30.00
Dead Latch Paddle 5902 Each $ 81.00
Transformer for strike release 1800 Each $ 66.00
MK1A Finger Guard, Push Side MK1A Each $ 160.00
MK1B Finger Guard, Pull Side MK1B Each $ 160.00
Lock Mechanisms
List Pricing
Item Description Part
Number Unit Price
Page | 34
Regent Concealed Vertical Rod - Clear Anodized
5770-36CL
Each $ 700.00
Regent Concealed Vertical Rod - Bronze Anodized
5770 - 6D Each $ 700.00
Active leaf Escutcheon 57 - EP1 Each $ 40.00
Regent Electrified Panic EL - 5770 Each $ 2200.00
Regent Power Supply 1406-04-
AO Each $ 1,000.00
Regent 8 wire electric hinge 4001
8 Wire Each $ 600.00
Adams Rite G86 Panic G86 Each $ 1,000.00
Wire Transfer 4612-1 Each $ 250.00
*Von Duprin Concealed Vertical Rod – Active
3347A-NL-OP
Clear Anodized $3,366.00
Bronze Anodized
$ 3,687.00
*Von Duprin Concealed Vertical Rod – Inactive
3347A-EO
Clear Anodized $2,942.00
Bronze Anodized
$ 3,263.00
*Von Duprin Concealed Vertical Rod – Electric
EL-3347A-NL-OP
Clear Anodized $4,745.00
Bronze Anodized
$ 5,066.00
Cylinder dogging (Not available with "EL" function)
CD Each $ 113.00
Electric Latch Retraction - Conversion Kit
EL-515 Each $ 1,170.00
*Please note that Von Duprin and Sargent pricing is subject to frequent price adjustments. Prices may vary from this catalog.
Lock Mechanisms
List Pricing
Item Description Part
Number Unit Price
Page | 35
Electric Power Transfers EPT-10 Each $ 600.00
PS914 Power Supply PS914 Each $ 1,024.00
*Sargent Concealed Vertical Rod – Active
8410 x 106/113
US32D $3,884.00
US10B $ 4,044.00
*Sargent Concealed Vertical Rod – Inactive
8410 US32D
$3,115.00 US10B
$ 3,274.00
*Sargent Concealed Vertical Rod – Electric
56 8410 x 106/113
US32D $5,139.00
US10B $ 5,298.00
*Please note that Von Duprin and Sargent pricing fluctuates often and requires a quote with current pricing to be accurate
Sargent Power Supply 3540 Each $ 1,000.00
Impact Door Frame and Door Extrusions
List Pricing
K-2 Door Series Extrusions
Part Name
Description Mill
Finish White Paint
Clear Anodized
Bronze Anodized
Page | 36
SMI-005 Frame Jamb $242 $300 $273 $305
SMI-006 Frame Head $276 $340 $320 $366
SMI-015 Door Stop Cover $21 $27 $30 $40
SMI-016 Transom Sash
Base $86 $106 $104 $123
SMI-017 Transom Sash
Stop $43 $54 $58 $74
SMI-018 Transom Head $310 $374 $327 $353
SMI-036 Bumper
Threshold $134 n/a n/a n/a
SMI-037
Threshold Ramp Adapter
$33 n/a n/a n/a
SMI-038
ADA Threshold Cover
$24 n/a n/a n/a
SMI-039 Hi Rise
Threshold Cover $143 n/a n/a n/a
SMI-042 Frame Head for
OHCC $215 $267 $234 $254
SMI-044 Door Stop Base $33 n/a n/a n/a
SMI-045 Door Stop Cover
for OHCC $40 $50 $56 $73
Non-Impact Door Frame and Door Extrusions
List Pricing
McKinley Door Series Extrusions
Part Name
Description Mill
Finish White Paint
Clear Anodized
Bronze Anodized
Page | 37
SMI-110 Frame Jamb $138 $190 $180 $208
SMI-111 Door Header $190 $232 $215 $242
SMI-126 Door Stop $28 $33 $38 $50
SMI-113 Head $147 $195 $185 $225
SMI-115 Horizontal $194 $240 $240 $288
SMI-118 Glass Stop $36 $56 $50 $68
SMI-109 Saddle
Threshold $180 n/a n/a n/a
SMI-128 Door Sash Base For 1” glazing
SMI-129 Door Sash stop For 1” glazing
Care and Maintenance Aldora Aluminum Products
Glass, Hardware, Aluminum
Page | 38
Glass Glass should always be cleaned regularly with mild soap and water. Never use razor blades or abrasive cleaners as it can damage the surface of the glass. Should your purchase include Hurricane Resistant or Blast Resistant glass, it will feature a laminate between two pieces of glass. The laminate is susceptible to harmful vapors and can de-laminate if exposed to harsh cleaning products. In that regard, the glass should only be cleaned with a mild non-abrasive glass cleaner or mild soap and water. The cleaner should be wiped off immediately with a squeegee. Do not allow cleaning agents to collect in the glazing pocket. Cleaning should not be done in direct sunlight. Razor blades or other metallic cleaning tools should never be used on glass. Should your glass composition include a coated performance glass, take particular care to not allow any metal surface to come into contact with the coating. A scratch in the coating will affect not only visibility but the performance of the glass. Aluminum Finish The finish provided with your Aldora product is also vulnerable to harsh cleaning agents. Only clean with mild detergents and do not let residue sit on the product. Avoid cleaning when surface is hot from direct sunlight. Remove any material from the surface as soon as possible. Mortar, exterior paints, spackles, landscaping materials, or other products can permanently damage the aluminum finish. Hardware Proper function of the latch mechanism and hinges require periodic lubrication. For best results, we recommend white lithium grease. This should be applied to moving parts every 6 months or every 3 months for coastal applications. Do not use spray on oils (WD-40) as they can “gum up” and leave a sticky residue that attracts dirt. Door Gaskets Door gaskets provide a seal against the elements. Should a gasket get torn or damaged it should be replaced. Gaskets are also vulnerable to harsh cleaning agents and may become brittle or cracked, limiting their effectiveness. Use only mild, non-abrasive cleaning agents around the gasket and remove any excess immediately after cleaning. Sealants Sealants are under a constant barrage of sun, weather, sprinklers, etc. and are subject to breakdown over time. Sealants should be checked every 6 months to insure the watertight properties of your Aldora product.
Care and Maintenance Aldora Aluminum Products
Glass, Hardware, Aluminum
Page | 39
Threshold Pin Strike The Aldora threshold is drilled to allow the pin strike to penetrate during the engagement of the locking mechanism. The drilled hole must be kept free of debris in order to allow operation of the pin strike. If the thumbturn does not engage the lock, check the pin strike hole for debris. Do not force the thumbturn as doing so can damage the locking mechanism.
Post Tropical Storm Inspection Your Aldora product is designed to withstand the maximum pressures as stated in the product approval (NOA). However, the pressures exerted on the window or door for the duration of a tropical storm can compromise the integrity of joint fasteners and sealants. It is highly recommend that all products are inspected for sealant or joint damage after a storm. Aldora can recommend a glazing professional (installer) to assist in the inspection and re-seal where necessary. Documentation of post-storm inspections is required for subsequent warranty requests.