Upload
lyminh
View
222
Download
0
Embed Size (px)
Citation preview
CUSTOM RADIATOR TEMPLATE
To Order Call 1-800-722-3723 • 864-845-5000 • Fax 864-845-5001 • www.griffinrad.com
Name:_____________________________________ E-Mail Address: _____________________________ Street Address: ___________________ City: _________________ State: _____ Zip: __________________ Phone: _________________________ Cell: _________________________ Fax: _____________________ Instructions: This is a Adobe PDF Form, you must use Adobe Acrobat(free version will work) to properly interact with this form. All the shaded areas on this form can be selected or information inserted into these areas. You can select our defaults from the dropdown boxes below OR you can type your custom components into ANY form element. 1. Select/Fill out all information and specifications using standard components where applicable. 2. Select/Place all desired components (outlets, filler, drain, etc.) where they are needed. Include detailed mounting brackets or studs, fan shroud & AC condenser locations. 3. The sample radiator is drawn with square tanks. If another tank shape is desired, draw this in with dotted lines. Indicate any area of the radiator where clearance may be a factor. 4. Read, fill-out, sign and date the drawing (agreement) in the customer approval signature box at the bottom of the drawing. 5. Once completed, fax or mail this information to Griffin Thermal Products. When transmitting via fax, please make certain that your answers & details are in BOLD ink.
NOTE:*MARK-UP THE ATTACHED RADIATOR DRAWING AS VIEWED FROM THE DRIVERS SEAT*
Vehicle & Radiator Specifications: Vehicle Year: _________ Make: _____________ Model: __________________ Vehicle Application: (select one) Industrial__ Street__ Off Road__ Race Type ___ Replacing Existing Radiator? Yes__No __ Engine displacement (cubic inch, liters, etc.)_________________ Engine horsepower: ______________________ Type of fan: (select one) MECHANICAL__ or ELECTRICAL__ Current radiator core thickness: ___________ (Obtained by putting a small wire through the core and measuring it) Engine Oil Cooler: fitting type: _____________________ Transmission Cooler: fitting type? ____________________ (Specify location on drawing) (Specify location on drawing) Do you have air conditioning? Yes__ No__ Has this form been helpful? _____________________________________
Core and Tank Sizes Tube Size Number or Rows Core Thickness Tank Width 1" 2 row 2-1/4" 3" 1-1/4" 1 row 1-1/4" 2-1/4" 1-1/4" 2 row 2-3/4" 3" 1-1/2" 1 row 1-1/2" 2-1/4" 1-1/2" 2 row 3-1/4" 3-1/2"
Standard Griffin Components & Options: Transmission Cooler Fittings: 1/8" NPT_, 1/4" NPT_, 5/16" Inverted Flare_, 3/8" Inverted Flare_, 1/2" NPT_. Oil Cooler Fittings: 1/2" NPT_, #10 AN Male_, #12 AN Male_, 20mm_ Inlet and outlet OUTSIDE diameters: .63"_, .75"_, 1.00"_, 1.13"_, 1.25”_, 1.375”_, 1.50"_, 1.63"_, 1.75"_, 2.00"_, 2.25"_, 2.50"_ Filler necks: Billet_, SAE Small_, SAE Mini_
CUSTOM RADIATOR TEMPLATE
To Order Call 1-800-722-3723 • 864-845-5000 • Fax 864-845-5001 • www.griffinrad.com
CUSTOM RADIATOR TEMPLATE
To Order Call 1-800-722-3723 • 864-845-5000 • Fax 864-845-5001 • www.griffinrad.com