Upload
kisan-forum-pvt-ltd
View
251
Download
2
Embed Size (px)
DESCRIPTION
Cultivation Of Mint, NHB
Citation preview
MintArea Under Cultivation
South of Himalayan range covering the states of Punjab, Himachal Pradesh, Haryana, Uttar Pradesh and Bihar. The districts where mint is a predominant crop of winter-rabbi season are Moradabad, Badaun, Rampur, Nainitat, Udham Singh Nagar, Bareilly and Basti in the tarai region and Barabanki, Sitapur and Lucknow in the Central Uttar Pradesh, Jullandhar in Punjab and Ambala (Narayangarh) and Yamunanagar in Haryana and Muzaffarpur in Bihar.
Botanical Name : Mentha arvensis
Family : Laminaceae
Plant Discription : It is a perennial herbaceous plant with the root-stock creeping along or just under the ground
surface. It has a rigid branching, pubescent 60-90 cm tall stem bering aromatic leaves.
Centre of Origin : Mediterranean regions
Pollination System : Cross pollinated
Chromosome No. : 2n=96
MintDiseases
Stolon Rot (Macrophomina Phaseoli)
The disease causes rotting of the underground stem and death of the entire plant. One of the main
damages caused by the disease is the reduction in the production and rotting of the stolons by the
end of the cropping season.
Control : The disease can be controlled by proper crop rotation. Mint should not be planted
continuously in those areas where attack of stolon-rot is observed. It is better to follow 3-year-crop
rotation with rice, wheat and mint. It is safer to discard all the diseased stolons while planting and
treat the stolons with 0.25% solution of Captan or 0.1% Benlate.
Root Rot (Thielavia Basicola; Rhizoctonia)
Numerous dark brown necrotic spots appear on stolons and roots
Control : It is safer to discard all the diseased stolons while planting. The stolons should be pre-
treated with 0.25% solution of Captan or 0.1% Benlate
Leaf Spot (Corynespora cassiicola; Curvularia lunata; Alternaria spp)
Small dirty brownish necrotic spots are observed on the leaves and twigs leading to defoliation
Control : Treating the stolons with 0.25% solution of Captan or 0.1% Benlate or spraying with
0.3% Copper Oxychloride is recommended.
Fusarium Wilt (Fusarium Oxysporum)
The leaves of the affected plants turn yellow, curled and finally dry.
Control : Benlate, Bavistin and Topsin can be used to control the disease.
Root knot (Meloidogyne Incognita, M. Javanca)
The nematode affected plants show stunted growth with yellowing of the leaves.
Control : Application of neem cake during planting reduces the nematode population.
Rust (Puccinia Menthae)
Golden brown spots are observed on the leaves and twigs. The leaves turn yellow and fall off.
Control : Spraying the crop with 0.3% Copper fungicides immediately on the appearance of the
disease is recommended. Early harvest of the crop during May is suggested so as to decrease the
losses due to falling of leaves.
Powdery Mildew (Erysiphae Cichoracearum)
Powdery white patches on the upper and lower surfaces of the leaves and stems are observed.
Under favourable conditions, the disease causes severe loss due to defoliation. It also reduces the
oil content up to 50%.
Control : Spraying Sulphur formulation or fungicide like Karathen-WD is recommended. Spraying
should commence as soon as the disease appears in the field and should be repeated every 10-15
days.
MintHarvesting
The mint crop herbage is harvested when the field is dry and weather is bright and sunny. A simple
way to judge the maturity is to see whether the lower leaves have started turning yellow or when the
plant starts flowering.
The yellowness of lower leaves indicates that any further delay in harvesting may cause loss in the
yield due to falling of the yellow leaves.
The usual method of harvesting consists of cutting the green herb by means of sickle from 2-3 cm
above the ground.
The crop planted with stolons in January and February is harvested twice and that planted with
seedlings during March and April is harvested once. The stolon planted crop is first harvested after
100-120 days of growth in the month of May. The second harvest is taken between 60-75 days
following the first harvest. The transplanted mint crop is harvested in June or July.
Yield
The yield of herbage from a mint crop depends upon a number of factors. On an average, 20-25 tonnes
of green herb per hectare can be obtained in three cuttings yielding 125-200 kg of oil/ha.
Uses
Menthol mint essential oil is the main source of natural menthol.
The dementholised oil (DMO) is reconstituted to produce oil similar to Mentha piperita oil. Several of
the many dozens of terpenes present in the essential oil are valuable compounds that find uses in the
cosmetic and pharmaceutical industries. Menthol itself is used as a flavouring agent mouth-related
produces such as fresheners, tooth pastes and chewing gums, etc. Menthol mint oil because of its
antimicrobial properties enhances the shelf of edible products and grains. Menthol mint oil is an
essential ingredient of the ointments, pain balms, lozenges and syrups. It is also used in cosmetic
preparations, colognes, deodorants, cosmetics, etc. In India, menthol and mint oil are extensively
used in betel (pan) related industries.
MintIntercultural Operations
Weed Control
Weeds must be removed in the initial period when it is easier to enter the field. Weeding with hand
or mechanical hoes within the first six weeks of planting can help in the control of weeds. This
process can be repeated once or twice at an interval of about two to three weeks, after the first
weeding.
Since weeding and hoeing accounts for 30% of cost of cultivation, use of wheel hoes either driven
by hand or bullock drawn helps in reducing cost on interculture. Weedicides cannot control all the
variety of weeds. Therefore best method is to combine manual, mechanical and chemical methods.
Some of the effective herbicides include Oxyflurofen (0.5 kg a.i. / ha), Pendimethalin (0.75 a.i. /
ha), Simazine and Atrazine (1 kg a.i. / ha) [a.i. = active ingredient]. The best procedure is to first
apply the weedicide followed by manual or mechanical weeding at 8 to 10 weeks when mulching
should also be applied.
Crop Rotation
Continuous cropping of any of the mints is not advisable, as it results into considerable increase in
the weed population, soil-borne diseases and insect problems. One of the best methods of weed
control in mint is to follow a suitable crop rotation. Rotation of mints with transplanted rice
minimizes weeds interference, helps in reducing the soil-borne diseases, fungal pathogens and the
insects. In the districts of Lucknow, Barabanki, Sitapur, etc., the best rotation is rice-potato-
transplanted mint. In areas where rice is not a popular kharif crop, any other food crop which
requires clean cultivation can be included in rotation.
Rotations for Mint Cultivation in India
Rotation of the Early Mint
1. Maize/rice-potato-mint
2. Rice-mint
3. Maize/rice-vegetable pea-mint
4. Maize/rice sugarcane-mint
5. Maize/rice-lahi-mint
6. Arhar-mint
Rotation of the Transplanted Mint
Maize-late potato-mint
Rice-field pea-mint
Maize/rice-mustard-mint
Maize/rice-wheat-mint
Maize-lahi-wheat-mint
Arhar-wheat-mint
Intercropping
Mint as a minor crop can be intercropped with some major crops. To inter crop sugarcane and mint,
sugarcane is planted in the spring in February. The row to row distance of sugarcane is kept at 90 cm.
A few days after planting of sugarcane, stolons of mint are planted. While sugarcane continues to grow,
the mint is harvested in the month of May. Usually the fertilizer would be applied at double the rate in
mint-sugarcane intercropping fields.
Leguminous crops, maize, sunflower, wheat and onion or garlic can be intercropped with mints. In such
intercropping systems, planting of mint stolon and transplanting of onion / garlic should be done
simultaneously. Intercropping of legumes is particularly profitable with transplanted mints. Besides the
additional yield of legume grain, there is benefit from biological nitrogen fixation that occurs in the root
nodules of leguminous plants.
If wheat is sown late, mint stolons can be sown between the wheat lines. Both wheat and mint will grow
together. Wheat will be harvested and subsequently mint will take over.
MintIrrigation
To obtain luxuriant growth, sufficient fertilizers and water must be applied to mint crop. A minimum
water requirement of about 100mm is required to obtain good yield. The crop should be irrigated
after the monsoon during September, October and November. The field requires irrigation at an
interval of two weeks from January to March while irrigation at ten days interval are sufficient from
April to June and water logging is to be avoided by providing adequate drainage. In case of heavy
soils and the soils prone to water logging, it is better to cultivate mint on ridges. Citronella
distillation waste and sugarcane leaf mulches can be used for control of weeds, soil moisture
conservation and control of soil temperature. The frequency of irrigation can also be reduced by
25% through the application of these mulches @ 5 t/ha.
MintManuring & Fertilization
The major essential oil contents are located in the leaves of mints. More the leaves, the better is
the yield from crops. The vegetative growth for the higher production of leaves can be stimulated
by the application of essential plant nutrients to the soil or to the plant directly. The recommended
fertilizer dose per hectare by CIMAP is as follows-
During
land
preparation
During
planting
st 1 dose 5
weeks
after planting
nd2 dose 5
weeks
after first
application
3 rd dose
immediately
after harvest
th4 dose 5
weeks rd
after 3
application
FYM 25-30
Tonnes
100 kg Urea
300 kg SSP
60 kg MOP
Urea
50 kg
Urea 50 kg Urea 50 kg Urea 50 kg
Foliar spray of urea @ 2% is also advisable especially late in the season when top dressing of soil
is difficult. This technique should also be used in the crops of mint grown in sandy soil. It is also
advisable to spray on foliage 0.5% FeEDTA to promote photosynthetic capability of the leaves by
prevention of chlorosis.
MintPests
Mint Leaf Roller (Syngamia Abrupatalis)
The caterpillar folds the leaf in the form of a roll and feed inside the leaf tissue. The edges of the
leaves are held together with silk-like filaments. Leaves get rolled in August September
Control : Thiodan @1.5ml/litre of water should be sprayed at weekly intervals. Two-three sprayings
are sufficient to control the pest.
Red Pumpkin Beetle (Aulocophora Fovicollis)
Leaves and buds are eaten away
Control : Malathion spray @1ml/litre of water is effective.
Cutworms (Agrotis Flammatra)
Pest damages the young plants at the collar region during spring season.
Control : Soil treatment with Phorate 10G before planting the crop is recommended.
Hairy Caterpillar (Diacrisia Obliqua)
The caterpillar starts eating the under-surface of the leaves. And the leaves are damaged
Control : Spraying of Thiodan or Malathion @1.7ml/ litre of water is recommended as control.
MintPlanting
Planting from Stolons
In a nursery sown in August with mature plants, the stolons become available for planting during
December - January. The field should be ploughed and harrowed thoroughly and divided into beds to
facilitate irrigation and free of weeds and stubbles. In each bed, lines are opened at a distance of 50 to
70 cm depending upon the variety to be cultivated. The furrows are opened about 5 to 6 cm deep
manually or tractor driven harrow like instruments. Within a furrow, stolons are placed end to end and
furrows are closed with soil. The stolons sown bed is irrigated immediately. On an average, 4 to 5
quintals of stolons are required for planting of one hectare of land. The stolons sprout in about 3 to 4
weeks when planted in January and 2 to 3 weeks when planted in February. Generally the planting
should be done as early as possible in January to February.
Planting from Seedlings
The field should be prepared to a fine tilth and divided into beds of convenient sizes. The beds to be
transplanted with mint should be flooded with water. The seedlings to be used should be dug out from
the plantlet nursery. The fresh seedlings of about 9 - 15 cm height should be transplanted at a spacing
of 40 x 10cm. Transplanting should be completed between the month of March and mid of April.
Transplanting of mint seedlings later than 15th April should be avoided.
MintPost Harvest Technology
Storage of Herbage
Some reduction in oil yield occurs if herbage is stored for a longer period of time. Storage of herbage for
a period longer than a weeks is not recommended.
Distillation
To obtain the essential oil mint, the fresh or semi dries herbage places in a tank treated with passing
steam under pressure. The steam that comes out of the tank is then passed through a condenser.
The condenser receiving the steam, carrying the oil extracted from the herbage in the tank is kept
constantly cool by circulating cold water over/around it.
The condensed oil and water mixture is collected in a receiver. Since the water and oil have different
densities, oil floats on the surface of the water in the receiver. The oil is skimmed off and collected.
The oil that is skimmed off must be cleaned of traces of water that it may carry. For this purpose, a
separator funnel is used. Any remnant moisture in the oil is removed by treating with anhydrous
sodium sulphate and decanting. The whole process is highly critical in the realisation of the potential
yield of the crop.
Distillation of the oil is an energy experience process. Simple treatments of the herbage can reduce the
total energy requirement for distilling the crop.
Mint herbage should be shade dried for about a day before it is distilled. Care should be taken so that
decomposition of the herbage does not initiate during the drying process.
The distillation requires a source of steam. A high pressure boiler is used for generating the stream.
The size of the boiler depends upon the size of the tank charged with herbage and the number of such
tanks connected to the boiler.
The tank for the charging of the herb should have a detachable lid at the top. Such an arrangement
permits form packing of the materials in the tank from the top. Mild steel is used to construct such tanks.
The lid has to be air-tight.
A rubber gasket helps in making the contact between the lid and tank air-tight. Each tank has an inlet
and outlet for the steam and also an outlet for draining out of any left over water in the tank. Condensers
can be of several kinds. Tubular types of condensers prove efficient. The tubes in the condensers
should be of stainless steel or aluminum. The receivers are so designed that water can be drawn off
from the bottom by means of pipe.
The oil and water collected from receiver can be separated by use of the glass or the metallic
separators. The distillation of herbage should be carried out for at least two hours although 80% of the
oil is received in the receiver in about one hour's time. The oil that is received later is richer in menthol.
Directly-fired Distillation Tank
This equipment is suitable for small farmers.
The lower part of such tanks is filled with water. The water area is separated from the distillation area by
a plate. The upper portion is filled with herbage. The tank is heated from the bottom. The steam
produced from the water passes through the herbage and carries the oil and water vapour through the
condenser to the receiver.
MintPropagation
Mint can be planted in the field in the following ways :1. by means of underground vegetative parts called suckers or stolons ,2. through propagules/ seedlings. Where mint is to be planted early in the season, stolons are used as the
planting material.
3. In case of spearmint, pepper mint and bergamot mint, sometimes runners are also used for planting.
4. In the case of late planting, first the stolons are densely planted in nursery to produce propagules /
plantlets / seedlings which in turn are transplanted in the field.
Production of Stolons
The plot should preferably be the best piece of land. Around 200 Sq. M Plot is required to produce
stolons for 1 hectare. Mature plants of chosen variety brought from a high quality nursery/ CIMAP
should be planted at 30 X 30 cm or should have been produced by farmer himself. Care should be
taken that the mother plants of the area of previous crop from which they are to be taken should not be
allowed to produce seeds; the flowers if formed should be deliberately removed. This way purity of the
planting material will be maintained. The nursery for the stolons is planted in August. The nursery is
given frequent irrigation avoiding stagnation of water. Stolons are ready for use during the months of
December and January. To obtain the stolons under the ground in the nursery, the soil is opened
manually or mechanically. The stolons can be used immediately or within a fortnight or so.
Production of Seedlings
The land to be chosen to raise the seedling nursery should also be of good quality soil and well
drained. About 200-sq. m of land is required to produce seedlings for planting one hectare of land.
In the late February or early March, the nursery for raising the seedling is sown. The stolons are
dug out from the nursery and are chopped to pieces of about one inch size. The seed bed in which
the stolons pieces are sown should have sufficient quantities of farmyard manure (FYM). Such bed
is filled with water and puddled. The chopped stolons are further broadcast into the beds. @ About
100 kg/ 200 sq. m of seedbed. To speed up the growth of stolons, they should be covered with
some soil and mulching material. The stolons generally sprout in about two weeks time. The plants
bearing upto six leaves should be chosen for transplanting in late March to early April
MintSoil & Climate
Soil
Loamy Well-drained soils with good water holding capacity and rich in organic matter are better suited
Mint crop does not tolerate water stagnation having a pH 6.5-8.0.
Climate
Open sunny situation during the growing period is favourable. Japanese mint can be grown in all
tropical and subtropical areas. Bergamot mint can be grown even in temperate climate. Excessive
rains and damp winters which cause root rot. Peppermint and spearmint cannot be grown 0
profitably in tropical and sub-tropical areas, especially with very high summer temperature (41 C).
MintVarieties
MAS-1 The plants are dwarf and early maturing. This variety
gives 50% more oil yield with higher menthol content
(80-85) and yields 200 q/ha of herbage and 125 kg oil
/ ha .It should not be used when ratooning is to be
practiced.
Kalka (HY-77) The plants are somewhat taller than MAS-1. This
variety shares many of its characteristics with MAS-1
and is tolerant to several fungal diseases including
leaf spot and rust diseases. The essential oil has
more than 80% of menthol. Kalka matures early. The
crop of Kalka yields about 250 q/ha of herbage and
150 kg oil/ha. The variety Kalka is not recommended
for ratooning. It is especially well adapted to the
areas adjoining Lucknow, Sitapur and Barabanki
where soils are sandy loam and climate is somewhat
drier than that of the tarai region.
Shivalik It is an introduction from China. This variety is highly
suitable for obtaining second cut through ratooning.
The herbage yield is 300q/ha while the essential oil
yield amounts to about 180 kg/ha with a low menthol
content (70%). Shivalik is highly sensitive to the
fungal diseases and pests prevailing in the tarai
area.
Himalaya This variety yields high amount of essential oil and is
not susceptible to pests and diseases. Like Shivalik,
Himalaya can be ratooned for two cuts of herbage.
Much like MAS-1 and Kalka, it can be used in areas
and conditions where only one cut of herbage can be
taken. The yield of herbage is 400q/ha and essential
oil is 250 kg/ ha. Its oil is of high quality with menthol
content of 80%.
Japanese Mint or Menthol Mint ( Mentha arvensis)
Variety Description
Hybrid 77 It is a tall vigorous compact growing variety. It
produces 762q/ha of fresh herb, 468 kg oil/ha
containing 81.5% menthol (obtained from 3 cuts). It
is highly resistant to rust diseases.
EC-41911 This is an erect type variety, which is less affected by
rains. It produces 236.5 q/ha of herbage and 125.2
kg/ha of oil with 705 menthol. This oil is preferred in
food flavours.
Spearmint (Mentha spicata).
MSS-1 It is a selection from spearmint cultivars introduced
from USA. It produces fresh herbage of 535q/ha and
yield 253 kg of oil in 3 cuttings containing 60%
carvone.
MSS-5 It is a selection from MSS-1, which yields 690q/ha of
oil in 3 cuttings. It has 70% of carvone in the oil.
Punjab Spearmint-1 It is an erect growing variety producing 209 q/ha of
herb containing 0.57% oil. The oil yields 119.29
litres/ha containing 68% carvone.
Bergamot Mint (Mentha citrata)
Kiran The variety produces 239 kg of oil with 48% linalool,
over 172 kg and 39% linalool over parent
cultures.
Variety Description