CTV vertical pumps2012 rev 1

CTV

2

About Tapflo

Tapflo - your reliable pumpchoiceWith experience from industrial fluid handling and pump manufacture since 1970,

we know what you as a customer require from an industrial pump. Ever since we started our manufacture of air operated diaphragm pumps, we have always had

our winning concept in mind: to create pumps for reliable duty and with a minimal number of components enabling easy maintenance. We are always keenly aware of new requirements and ideas from our customers. The pro-ducts are therefore always in continuous progress with improved detail solutions, new materials and further accessories.

Tapflo qualityThe Tapflo pump is usually an essential part in the process with hazar-dous fluids. We always strive to supply the safest and most environmental friendly solution for these fluids. As a part of our safety thinking, we are in the frontline following important standards, guidelines and directives.

Many of our products comply with the EC ATEX directive for equipment in explosion hazardous environments. All our pumps are of course CE marked

and followed by our comprehensive instruction manuals. Tapflo is an ISO 9001:2001 certified company.

The history of TapfloTapflo was founded in Kungälv (north of Gothenburg), Sweden 1985 and has since

then been working with design and manufacture of air operated diaphragm pumps. The product range has grown from a few plastic models, to complete PE & PTFE, metal and sanitary series and lately also with complete ranges of centrifugal pumps. Within the Tapflo group today 130 employees are working in design, production and sales.

CTV

3

Leakage free and dry running safeCTV is installed vertically with the motor above the liquid surface. In this way the pump does not need any mechanical seal that usually is a source for leakage problems. Further on the pump is designed to be dry running safe.

Nearly maintenance freeThe simple design without bearings or mechani-cal seals grants for a pump that is usually main-tenance free. CTV is also insensitive of solids, up to ?? mm are allowed (depending of pump size).

Replacing self priming pumpsIn many installations the CTV pump replaces a self priming pump. The pump head of the CTV is submersed in the liquid. The pump operates more reliable compared with a self priming pump. The submersion depth is 419-425 mm (depending on model) but may also be equipped with a suction extension.

The superior solution for a

reliable fluid circulation and transferCTV is a single stage vertical centrifugal pump that is simple but very reliable in duty. The pump is specialized for transfer and circulation of various liquids from containers, sumps and tanks. CTV is manufactured from PP (polypropylene), PVDF or stainless steel AISI 316L.

CTV is commonly installed in surface treatment baths, circulating through filter and further to nozzle ramps.

CTV pumps are succesfully used in various ap-plications in today’s industries. Below are some examples.

Surface treatmentTransfer and return pumping in galvanizing, hot zinc, pickling and oxidation processes

Water treatmentTransfer and return pumping

Heat exchangersReturn pumping in heat exchangers

Waste disposalEmptying sumps

About CTV ∙ applications

4

CTV

Custom made IP 55 motor with bal-anced extended shaft grants for reliable duty in demanding applications.

Vapour seal protects the motor from aggressive vapours.

Pump casing unit in PP or PVDF with robust base plate to enable easy inside or outside tank installations.

Motor shaft sleeve in PP or PVDF to avoid any metal in contact with the liquid – no corrosion.

Impeller with high back vanes to avoid liquid from reaching the motor.

Discharge pipe in PP or PVDF is always included.

Pump cover with inlet thread with possibilities to fit strainer and/or suc-tion extension.

Chemical resistant casing o-ring in EPDM, FKM or FEP.

Pumps in PP & PVDF

PP PP (polypropylene) is suitable for most type of chemicals at tem-peratures up to 70°C. Ideal for pickling baths and acid degrease solutions etc.

PVDF PVDF (polyvinylidene fluoride) has superior chemical and me-chanical features. Ideal with hot acids up to 100°C, for example hot hydrofluoric acid.

CTV 25-9: 10.2 m3/hCTV 25-10: 13.2 m3/hCTV 25-11: 15.6 m3/hCTV 25-11.5: 18.0 m3/hCTV 32-8.5: 19.8 m3/hCTV 32-10: 24.0 m3/hCTV 32-12.5: 27.0 m3/h

5

CTV

Performance curvesThe performance curves are based on water at 20°C.

Technical data

Contact us for detailed curves. Changes reserved without notice

General characteristics 25-9 25-10 25-11 25-11.5 32-8.5 32-10 32-12.5

Max capacity (m3/h) 10.2 13.2 15.6 18.0 19.8 24.0 27.0

Max head (m) 10 14 16 19 10 17 23

Motor power (kW) 0.55 0.75 1.1 1.5 1.1 1.5 2.2

Outlet dimension (male BSP) 1” 1” 1” 1” 1 1/4” 1 1/4” 1 1/4”

Motor data 3-phase, 2-pole (~2900 rpm), 380-420 VAC, 50 Hz, IP 55

Max temperature Pump in PP: 70°C, pump in PVDF: 100°C

Materials

Pump casing and impeller PP or PVDF

Casing o-ring EPDM, FKM or FEP

Dimension CTV 25 CTV 32

A 285 285

B 200 200

E 85 85

F 56 56

G 95 95

H 1” 1 1/4”

J 25 25

K 419 419

L 123 126

M 60 60

N 1” 1 1/4”

Motor power D I

0.55 kW 196 213

0.75-2.2 kW 214 267

Dimensions and technical dataDimensions in mm, where other is not indicated

CTV

6

Changes reserved without notice

Pumps in stainless steel

Stainless steel pumps The stainless steel version is ideal at higher temperatures, up to 100°C and in special applications like hot sodium hydroxide.

All wetted metal components are made from corrosion resistant stainless steel AISI 316L.

For special applications like han-dling of chromium nickel, electro polished models are available (pump on left side).

CTV 20-9: 12.0 m3/hCTV 25-9.8: 17.0 m3/hCTV 40-12.5: 34.0 m3/hCTV 40-13.5: 20.0 m3/h

Custom made IP 55 motor with bal-anced extended shaft grants for reliable duty in demanding applications.

Vapour seal protects the motor from aggressive vapours.

Pump casing unit in stainless steel with robust base plate to enable easy inside or outside tank installations.

Motor shaft sleeve in stainless steel to avoid any metal in contact with the liquid – no corrosion.

Open impeller that is insensitive of particles and solids.

Discharge pipe in stainless steel is always included.

Pump cover with inlet thread with possibilities to fit strainer and/or suc-tion extension.

Chemical resistant casing o-ring in EPDM, FKM or FEP.

Shaft bushing in PTFE to grant a reliable operation.

CTV

7

Changes reserved without notice

Technical data

General characteristics 20-9 25-9.8 25-9.8 40-12.5 40-12.5 40-13.5

Max capacity (m3/h) 12.0 17.0 17.0 19 34 20

Max head (m) 10 11 11 22 22 31

Motor power (kW) 0.55 0.75 1.1 1.5 2.2 2.2

Outlet dimension (male BSP) 3/4” 1” 1” 1 1/2” 1 1/2” 1 1/2”

Motor data 3-phase, 2-pole (~2900 rpm), 380-420 VAC, 50 Hz, IP 55

Max temperature 100°C

Materials

Pumpcasing and impeller Stainless steel AISI 316L

Casing o-ring EPDM, FKM or FEP

Performance curvesThe performance curves are based on water at 20°C.

Dimension CTV 20 CTV 25 CTV 40

A 267 267 267

B 207 207 207

E 102.6 102.6 102.6

F 36 50 66

G 93.5 93.5 93.5

H 1” 1 1/2” 1 1/2”

J 8 8 8

K 420.5 420.5 425

L 113.5 127 139

M 60 60 60

N 3/4” 1” 1 1/2”

Motor power D I

0.55 kW 214 211

0.75-2.2 kW 253 265

Dimensions and technical dataDimensions in mm, where other is not indicated

www.tapflo.com

Please contact us at your nearest Tapflo officeTapflo has approximately 50 sales offices spread over more than 20 countries. In addition to this we are represented by independent distributors

in about another 30 countries.

E-mail addresses: Commercial questions sales@tapflo.com Orders order@tapflo.com Tech support support@tapflo.com

Tel: +46 303 63390 Fax: +46 303 19916

Tapflo ABFilaregatan 4 S-442 34 Kungälv, Sweden

Austria

Tel: +43 732 27292910

Azerbaijan

Tel: +994 502660799

Baltic States

Tel: +371 67472205

Belarus

Tel: +375 17 3934609

Bulgaria

Tel: +359 (0)2 974 18 54

Croatia

Tel: +385 91 4884 666

Czech Republic

Tel: +420 513 033 924

China

Tel: +86 510 8241 7602

Denmark

Tel: +45 36 454600

France

Tel: +33 1 34 78 82 40

Georgia

Tel: +995 577 463010

India

Tel: +91 20 65000215

Ireland

Tel: +353 1 2011911

Italy

Tel: +39 0362307698

Japan

Tel: +81-3-6240-3510

Kazakhstan

Tel: +7 727 3278347

Poland

Tel: +48 58 530 42 00

Romania

Tel: +40 21 3451255

Russia

Tel: +7 495 232 18 28

Serbia

Tel: +381 21 44 58 08

Slovakia

+421 911 137 883

Slovenia

Tel: +386 68 613 474

Spain

Tel: +34 91 8093182

South Africa

Tel: +27 31 701 5255

Turkey

Tel: +90 216 467 33 11

Ukraine

Tel: +380 44 222 68 44

Uzbekistan

Tel: +998 712370940

United Kingdom

Tel: +44 2380 252325