CSS Fat Mag Feb 2015

FatMagFASTENERS, ADHESIVES AND TOOLS

WIN a Northern Territory adventure in the Fat Chance Promo! p32

How an international brand like Saint-Gobain stays relevant by focusing on quality service

and local manufacturing

The wheel deal

Tech talk How to get

waterproofing right the first time

around, page 28

Safety special The best ways to

keep the workplace safe and sound,

page 40

Find us on Facebook! We’re at www.facebook.com/constructionsupplyspecialists

CATALOGUE SALEFEBRUARY-APRIL 2015

WIN a four-night Northern

Territory adventure in the Fat

Chance Promo! p32

2 Construction Supply Specialists

February – April 2015

Members in action, page 10After two years of hard work, the Legacy Way project is almost complete—thanks to a whole lot of teamwork from a multitude of suppliers.

New platinum lens technology, page 39Bollé has developed a new anti-fog and anti-scratch lens coating—perfect for working in high humidity conditions.

Safety at work, page 40Hundreds of construction workers are injured, or killed on work sites every year. It doesn’t have to be this way if Australian safety standards are upheld.

Kings of slings, page 50When it comes to synthetic slings, Beaver Brands leads the way in the areas of materials handling, lifting and load restraint, height safety and fall prevention, and personal protective equipment.

The wheel deal page 14A market leader in Australia since the 1970s, Saint-Gobain has been supplying the industrial market with high-quality products and proudly supporting Australian industryPLUSThe building of a race car, part two page 22We’re back to the workshop to meet more of the Garry Rogers Motorsport team—in particular the guys responsible for making the race car lighter, faster and betterANDHigh and dry page 28Getting the waterproofing wrong can be the most costly and difficult thing to repair on a job. So how do you ensure you’re getting it right the first time?

CONTENTS

REGULAR ARTICLESNeed to know – page 4Building approvals at 20 year high; cutting red tape for tradies; Australian scientists announce solar energy breakthrough; and much, much more!

Fun – page 57Crossword, Sudoku and Find-a-word. Solutions on page 62.

ABRASIVESSt Gobain 19 & 26

ADHESIVES AND SEALANTSHB Fuller 58Powers 47Sika 31Simpson Strong Tie 59

AIR FITTING AND HOSENitto 63

AIR TOOLSAirco 61KC Tools 36

BROOMS & SQUEEGEESImpact-A 20

CLEANING PRODUCTSCrete Off concrete dissolver 20DY Mark 60WD40 53

COMPACTORSOX Groups 18

COMPRESSORSAirco 61Maxus 35

DIAMOND CUTTINGSAlpha 52Bordo 48St-Gobain 19

DRILL BITSAlpha 52Sutton Tools 54

GENERATORSRoss 35

HAND TOOLSBahco 12Crescent 5Gamer 36 Gearwrench 5Hordern 8KC Tools 36Kincrome 56Malco 27OX Group 18Spear and Jackson 37Tridon 9

HOLESAWSAlpha 52Sutton Tools 55

LADDERSClimbmax 27Gorrilla Ladders 6

LASERS & MEASURING TOOLSLufkin 5Position Partners 48

LUBRICATING PRODUCTSWD 40 53

MATERIALS HANDLINGBeaver Brands 44Kincrome 56Richmond Castors 16 & 37

NAILING TOOLSAirco 61

PAINT AND METAL PROTECTIONDymark 60OX Group 18

POWER TOOLSBosch 49Dewalt 46Hitachi 13 & 27Makita 17Max 38Metabo 25Milwaukee 21

SAFETY PRODUCTSBeaver Brands 44 & 51Bolle 39IFS 45Impact-A 7Paramount 43Pratt 42

SCREWS & SCREW SYSTEMSSimpson Strong Tie 59

SHOVELSSpear and Jackson 37

STORAGE SYSTEMSGamer 36Pratt 42

TRANSFER PUMPSAlemlube 62

VACUUMSWhite International 35Kincrome 56

WATERPROOFINGBostik 30Sika 31

WHEELS & CASTORSRichmond Castors 16

WELDING PRODUCTSDynaweld 24

WORKWEARImpact-A 7MAK Workwear 45

About usThe store listed on the front of this magazine is a member of the Construction Supply Specialist Group. While the majority of your work will be conducted with your local CSS Member, this store is part of a national network of stores that can provide you with exceptional service and support where ever you may be working in Australia. For more store locations, visit www.constructionsupply.com.au.

Notes to the consumer:Some products are subject to plus freight costs where applicable. Some items may not be stocked in all stores, but can be ordered as required. Prices are valid while stocks last and are subject to change without prior notice. CSS Pty Ltd reserves the right to correct printing errors and omissions. All items include GST.

Construction Supply Specialists Pty Ltd

Administration - Head Office

6 Broadfield Rd, Broadmeadows VIC 3047

Tel: (03) 9357 4228 Fax: (03) 9357 4229

[email protected]

www.constructionsupply.com.au

3Catalogue Index


Need to know

New laws making it easier for licensed tradespeople to work across state borders and promises to cut red tape for small business started on 1 December 2014, said New South Wales Fair Trading Minister, Matthew Mason-Cox.

Mason-Cox said the Mutual Recognition (Automatic Licensed Occupations Recognition) Bill 2014 will allow certain licensed occupations, such as electricians, to carry out their trade in NSW on the basis of the licence they held in their home state.

“From December 2014, NSW, Queensland and Victorian electricians will be able to work across the Queensland and Victorian borders using the licence issued by their home state,’’ Mason-Cox said.

“This means electricians no longer need two licences to work when they are doing work on the border. They will face less paperwork and fewer fees that they would otherwise pay to hold numerous licences for the same work.”

Mason-Cox said the NSW Government

was committed to streamlining interstate recognition of occupational licensing, making it easier to do business for tradespeople living and working in border communities.

“Queensland already recognises some NSW electricians’ licences under their Electrical Safety Act and regulations, which allows NSW electricians to work in Queensland,” he said.

Mason-Cox said consumer protection continued to be front and centre of these reforms, which ensured that interstate licensees were subject to the same rules as local licensees when they do work in NSW.

“NSW Fair Trading will be able to take disciplinary and enforcement action against interstate licensees who work in NSW,” he said.

Australian scientists announce solar energy breakthroughAustralian scientists say they have made a breakthrough in increasing the efficiency of solar panels, which they hope could eventually lead to cheaper sources of renewable energy.

In what the University of New South Wales described as a world first, the researchers were able to convert more than 40 per cent of sunlight hitting the panels into electricity.

“This is the highest efficiency ever reported for sunlight conversion into electricity,” UNSW Professor Martin Green said in a statement.

“We used commercial solar cells, but in a new way, so these efficiency improvements are readily accessible to the solar industry.”

While traditional methods use one solar cell, which limits the conversion of sunlight to electricity to about 33 per cent, the newer technology splits the sunlight into four different cells, which boosts the conversion levels, Green told news agency Agence France Presse (AFP).

The record efficiency level was achieved in tests in Sydney and replicated at the US government’s National Renewable Energy Laboratory, the university said.

The technology is to be harnessed by Australian company RayGen Resources for solar power towers, which use sun-tracking mirrors to focus sunlight on a tall building.

Green is hopeful the technology can also eventually be used for solar panels mounted on people’s roofs, which he said currently had a 15 to 18 per cent efficiency rate.

“The panels that you have on the roof of your home at the moment have a single cell, but eventually they’ll have several cells, and they’ll be able to improve their efficiency to this kind of level,” he told AFP.

Green said strides in technology made in the solar industry such as the higher conversion levels were helping to drive down the cost of renewable energy.

He was confident that in a decade solar-generated electricity would be cheaper than that produced by coal.

Cutting red tape for tradies on the border

Building approvals have risen to a 20-year high, the strongest they have been since 1994, according to the latest data released by the Australian Bureau Statistics in December 2014.

“Record strong approvals are setting the scene for an expansion phase in residential construction,” said Peter Jones, chief economist of Master Builders Australia. In the pipeline, work is expected to strengthen as approvals in detached houses and renovations improve.

“In October 2014, in original terms, 19,032 dwelling units were approved, the third highest monthly result

on record,” he said.“In seasonally adjusted terms, approvals rose by 11.4 per cent driven by a 30.4 per cent bounce-back in multi-unit approvals.

“This residential building cycle needs to be stronger and longer for the sake of undersupplied industry and an economy in transition.

“However, some of the shine can still come off this positive outlook if policy reforms tackling barriers to increased supply, including local constrained land release, inefficient taxes and charges and council red and green tape, are not implemented,” Peter Jones said.

Building approvals at 20-year high

For more information go to fairtrading.nsw.gov.au

Big Boss Spirit LevelsUltimate Tape Measure

UW148SI10 8m x 25mmUW148ME10 8m/26’ x 25mm

LBBL60 600mm $30.00LBBL120 1200mm $45.00LBBL200 2000mm $69.00

• Strong ABS plastic case• Built-in shock absorber

bumper• Sliding end hook

• Over-size centre bubble• Dual line on bubble for 1º slope feature• 3 Vials: 1 x 180º and 2 x 90º• Dual colour rubber grips

42PC Socket Set Metric/SAE1/4” & 3/8” Drive83050 Metal case with EVA tray that can be easily removed for convenient storage into a tool chest/trolley drawer

12Pc Open End Ratcheting Set Metric855978, 9, 10, 1112, 13, 14, 15, 16, 17, 18 & 19mm

Combination Tool Set - Chest & 90Pc Socket Set Metric/SAE83170Includes: Deep Tool Chest1/4” Drive 6pt Sockets1/4” Drive 6pt Deep Sockets3/8” Drive 6pt Deep Sockets3/8” Drive 12pt Sockets1/2” Drive 12pt SocketsQuick Release RatchetsExtension BarsBit HolderSpark Plug Socket

$165.00

$99.00

Connect Clamps

Versatility has a NEW name...

• Interlocking clamp feature • Clamping force 227kg• Converts into Spreader • Pipe Grip • XL Pads for extra grip • Innovative connector rotates

and locks additional clamps for endless possible positions

XL Power Tape Measure

XL410M8 10m x 25mmXL410ME8 10m/33’ x 25mm

• High impact resistant case• Rubber Grip• Built-in shock absorber

bumper

$575.00

GREATDEAL

Official Tool Supplier to

$25.00

CC150 150mm $25.00CC300 300mm $28.00CC450 450mm $30.00CC600 600mm $35.00CC900 900mm $39.00CCTL100 Connector $10.00

Interlocking Clamps

Vice Feature

Pipe Grip

$33.00

All prices include GST

5

6 ®

Taking Ladder Safety to New Heights

Dual PurposeMaterial: Aluminium 150kg Industrial

Height: 1.8-3.3m (6-11ft) Weight: 10.7kg Code: DM006-I PRICE $199



Ladder Leveller130kg Industrial

Code: GLL-01 PRICE $179

Gorilla OutriggerMaterial: Aluminium

Code: AS-400 PRICE $49

Gorilla StabiliserMaterial: Aluminium 2 packCode: AS-300 PRICE $46

Features: Stabiliser ready, Converts from Double-sided A-frame

to straight ladder in seconds, Cross-braced spreader, Patented

Resin Bracing System, Non-slip aluminium treads and top cap.

Features: Spring loaded locking mechanism for easy fit and removal.

Provides additional stability for extension ladders. Convenient paint

bucket hook. 1150mm wide span and 250mm stand off.


Features: 2-bolt mounting, folds up/down for easy use, adjusts

to various sizes, patented.

When installed correctly the Gorilla stabilisers significantly increase

lateral stability of the ladder.

Features: Increase leg length by up to 25cm Includes 2 x base units,

1 x Ladder Leveller. Use on single, extension and Mighty ladders.

Note: Stabiliser conducts electrical current. DO NOT use where electrical hazards exist.Stabiliser shown with FEL12/21-I ladder (above) sold separately.

CELEBRATINGTEN YEARS

2005 – 2015

Need to know

Developers are hiring top architects to win tricky high-rise permits, then dumping the architect and watering down their approved designs to save money, it has been claimed.

Gardens are being scrapped, extra apartments squeezed in, cheaper material used and decorative elements cast aside, city planners said.

They say this cost-cutting occurs most commonly when property developers pay an inflated price for a block of land because it already has a high-rise planning permit attached.

A number of Melbourne councils are now making it a condition of some high-rise permits for the original architect to be kept on during construction, after becoming frustrated when hard-earned plans were tampered with later by a building or drafting company.

The Australian Institute of Architects wants to make the use of registered architects mandatory for building over

three storeys across Victoria and force developers to retain the same architect who won the planning approval.

These rules have long been enforced in New South Wales. Its State Environmental Planning Policy (SEPP) 65 laws that enshrine good design principles, such as a minimum of 50 square metres for one-bedroom apartments. Many one-bedroom apartments being proposed in Victoria are less than 45 square metres.

Victoria’s Coalition state government was in the midst of considering apartment design standards before they were voted from office. The new Labor government has promised public guidelines “ensuring that developments enhance, rather than trash, Melbourne’s liveability”.

Meanwhile, the Greens will push for a law requiring the original architect on any large building in the central city be retained from planning approval through to construction.

Architects dumped from apartment blocks to save money

Fair Work Building and Construction (FWBC) caution

FWBC is aware of a consultancy business which has established an unauthorised construction code compliance register.

The business is offering advice to construction companies about whether they are compliant with state and Federal building codes. It claims construction companies listed on the register comply with state and Federal building codes, and are eligible to tender for government-funded work.

It is understood the business charges substantial fees to companies wishing to be included on the register.

This register is not an official register and does not guarantee you are compliant with current or potential future state or Federal building codes.

The concerns expressed by FWBC are shared by the state authorities for the VIC, NSW and QLD codes.

boot upperImpact-A boots are made out of the best Nubuck water resistant leather.

Fully lined with anti-bacterial and breathable anti-abrasive cambrille lining.

insoleShock absorbing with multi-gel points for longer superior comfort.

Designed by Tradies, for

Tradies.These Safety Boots have

been made to meet not only the Australian Standards in foot protection, but also designed to meet the Construction / Builders

Workers regulation in regards to foot protection.

AS/NZS 2210:3

boot soleDual Density anti-slip, acid-resistant, anti-abrasion PU/TPU outer sole. Includes heel energy absorption system.

SAFETY BOOT

Both styles available in Black and Tan.

kevlar midsoleFlexible reinforced Kevlar midsole. Protects foot from sharps piercing through.

top capKevlar Toe Cap meets the Australian & New Zealand Standards.

boot upperImpact-A boots are madeout of the best Nubuck waterresistant leather.

Fully lined with anti-bacterialand breathable anti-abrasivecambrille lining.

insole Shock absorbing with multi-gel points for longer superior comfort.

Designed by Tradies, for

Tradies.These Safety Boots have

been made to meet not onlythe Australian Standards in foot protection, but also designed to meet the Construction / Builders

Workers regulation in regards to foot protection.

AS/NZS 2210:3

boot soleDual Density anti-slip, acid-resistant,anti-abrasion PU/TPU outer sole. Includesheel energy absorption system.

SAFETY BOOT

Both stylesavailable inBlack and Tan.

kevlar midsoleFlexible reinforced Kevlar midsole. Protects foot from sharps piercing through.

top capKevlar ToeCap meets theAustralian &New ZealandStandards.

7

Shayne from Fraser Coast Bolts presenting the prize to Andrew Godwin

8Premium Professional Products

Heavy Duty Quick Action Clamps with a

Non Slip DeviceFully heat treated serrated

six sided and profiled rail for additional grip and strength for SAFE and SECURE clamping.

Wear resistant blackened spindle with a comfortable two

component handle.

200x100mm TG20-2K $27.50300x120mm TG30S12-2K $36.50600x120mm TG60S12-2K $56.00

1000v VDE Screwdriver Sets

Surpasses IEC60900: 2004 & AC1000V standards. Optimum handle shape

for comfort and grip. Smooth frictionless ball

end reduces palm stress. Deep neck increases

thumb support. Handle hole for inserting a lever

to increase torque.

3pc Set 51393114 $34PH2, 4/5.5mm

7pc Set 51397798 $63 PH1/2, 3/4/5.5/6.5mm & C/Tester

Permanently fixed, non fade, non leak,

electrostatic stable vials for lasting accuracy. Suitable for normal and

upside down measuring.400mm 80A/40 $33 800mm 80A/80 $45

1200mm 80A/120 $54

Trade Levels

$69Powerful Stabila

rare earth magnets have 5 times more ‘pull’ than ferrite magnets.

Permanently fixed vials for lasting accuracy. This level really sticks!. Supplied with Belt Holster.

250mm Rare Earth Magnet Level 81SREM/25Measuring Tools For Real Pro’s Measuring Tools For Real Pro’s

600mm 80A/60 $421000mm 80A/100 $49.50


Need to know

Leighton wins $150m M4 contractConstruction firm Leighton Holdings and venture partner Rizzani de Eccher Australia have been selected to design and build a widened highway in Sydney.

Leighton (majority owned by Germany’s Hochtief) said its share of the work to upgrade a 7.5 kilometre stretch of the M4 highway is worth about $150 million.

The project involves widening the M4 from three to four lanes in each direction and is part of the first stage of the WestConnex, one of Australia’s biggest urban road projects. Work is scheduled to start in early 2015 and the widened stretch of road is due to open in 2017 according to Leighton.

Congratulations to the winners of the inaugural Fat Chance “Make a break for freedom” Travel competition! Thanks to the sponsors, Milwaukee, Impact-A and CSS, these lucky five people have won travel vouchers worth $3,500 each!

The winners are: Andrew Godwin from QldPeter Dinis from WAChad Elphick from NSWRod Turpin from VicJohn French from Tas

If you want your Fat Chance of winning a trip to Crab Claw Island in the Northern Territory, turn to pages 32 and 33, to find out more, and start packing your bags!

Fat Chance winners!

John from DBF Tools presenting to Rod Turpin

George Dean from Build Tech presenting the travel voucher to Brett Coombs, who was receiving on behalf of John French

Store owner’s Chris and Linda Waring presenting prize to winner Chad Elphick

WA winner Peter Dinis

Thread Files

Thread Restoring Set MetricPart No. 301450

Thread Restoring Master Set

Screw Extractor Drill & Guide SetPart No. 301534

• Comprehensive extractor kit is designed for the removal of stubborn broken studs and screws using a drill

• Fluted extractors provide a solid grip on broken studs or screws ranging from 3/16” to 9/16” (4–14mm)

• Removes studs with the highest allowable torque without expansion, breaking or jamming

• Ideal kit for automotive, building, engineering, plumbing and electrician trades

Part No. Range Hex Drive

301286 9–12mm 12mm

301287 12–16mm 14mm

301288 16–22mm 19mm

301289 22–27mm 21mm

• Designed to restore damaged, worn or corroded threads

• Suitable for metric threads

• 15 piece set features thread file, thread tap and dies

• Comprehensive kit designed for the removal of rusted, seized or stubborn nuts safely and without damage to the stud or bolt

• Features a flat round head design to allow operation in areas where working space is limited

• Manufactured from drop forged vanadium steel for superior strength and durability under impact

• 4 piece set

• Thread restoring kit for the repair and maintenance of damaged threads

• Suitable for restoring a wide variety of metric and SAE threads

• Includes tap and dies covering metric and SAE (UNC and UNF) and three double ended thread files

• Colour coded for identification between UNF, UNC and Metric

• All tap and dies are hex shaped

• Supplied in plastic case with identification locations

• 51 piece set

Part No. 321010

• Designed to restore damaged, worn or corroded threads

• Suitable for left and right handed threads of almost any diameter

• Features 8 internal thread repairers (thread identifiers) and 8 external thread files

• Available in Metric or SAE thread pitch designs

• Manufactured from heat treated plated steel

Contents:

Nut Splitter Set 9–27mmPart No. 301285

Part No. Description Thread Pitch Part No.

301065 Metric 0.80, 1.00, 1.25, 1.50, 1.75, 2.00, 3.00 (mm) $33.95

301066 SAE 10, 11, 12, 14, 16, 18, 20, 24 (TPI) $33.95

TRUSTED BY THEPROFESSIONAL

$10500inc Gst

$3395inc Gst

FROM

$6995inc Gst

$18995inc Gst

$7250inc Gst

0535

/14


9

It’s rare enough that you find established parklands expanding in a major capital city. But that was one of the gifts to the people of Brisbane

in the middle of last year, when work on the Legacy Way tunnel resulted in the largest upgrade to the Botanic Gardens since they opened in 1970. Additions will include a kitchen garden, amphitheatre, forest walk, playground and an 18-megalitre lagoon to help drought proof the area.

The Legacy Way is Brisbane City Council’s 4.6-kilometre road tunnel that will connect the Western Freeway at Toowong with the Inner City Bypass (ICB) at Kelvin Grove. The plan is that, once open, Legacy Way will almost


After two years of hard work, the Legacy Way project in Queensland is almost complete, thanks to a whole lot of teamwork from a multitude of suppliers.

Light at the end

Members in action

halve peak-hour travel times between the Centenary Bridge and the ICB.

The $1.5 billion cost is necessary, Brisbane Council says, because “Brisbane’s

popularity as a place to live and work has created strong population, employment and economic growth over the past decade. Under the Queensland Government’s South East Queensland Regional Plan, Brisbane must find room for 156,000 additional dwellings by 2031. With this growth comes a challenge in dealing with traffic congestion.

Traffic congestion not only impacts on our lifestyle but our economy, by causing delays to goods, increased business operating costs and environmental costs.

“In future years, the Australia TradeCoast precinct near Brisbane Airport will become an economic

of the tunnel

Construction Supply Specialists 11

Opposite page: The massive ventilation fans in the Legacy Way tunnel almost dwarf the construction workers. Above: The tunnel boring machine (TBM) Annabell disassembly.Left: The mechanical and electrical fit-out gantry.

“In some cases, I would take the supplier reps on site with me to discuss the specifications with the engineers directly.”Craig Williams, Allfix Fasteners account manager

It’s also a boon for local suppliers such as CSS Member Allfix Fasteners, which has been supplying the project with fixings and associated products from the start. On a project like this, explains Allfix account manager Craig Williams, supply has to be very much “on demand”.

“Even though they work to a program, there’s a lot of things changing on a daily basis,” he explains. “As much as Transcity’s engineers do all of the geological surveys and oil testing prior to work commencing, they often run into issues as they’re progressing through, and then they call on us to be able to supply a particular product, or a particular piece of machinery, or a particular item, to keep the project going.”

At the end of last year, as this article was being written, the project was going through its final stage. “That means all the mechanical services are in there doing all the fans for ventilation

and smoke control, cameras, signs, speakers, lights and public address systems. Prior to that, when the tunnel linings were going in, there was a lot of heavy-duty fasteners and tooling, boring equipment, carbide drills, and specialised gear.”

The process of meeting those challenges is straightforward, but still not always easy. “Transcity run everything through a procurement office at Toowong. So the foreman, or the engineer on site, will put a request into the procurement officer, who email out a request to quote. We’ll go away and source and quote on the product, and hopefully that results in an order.

“The biggest challenge of that, however, is that for whatever reason, a lot of the major suppliers are no longer warehousing here in Brisbane. So a lot of the product had to come from Sydney or Melbourne. And quite often, you don’t have much lead time to be able to supply that product.”

Meeting those challenging lead times is possible because of the depth of relationships Allfix has with their suppliers. “What we were able to do in those situations, depending on the product, was to go back to some of our key suppliers and requested project pricing,” explains Craig Williams.

“So, we all benefit by working closely with suppliers on one side and procurement on the other. In some cases, I would take the supplier reps on site with me to discuss the specifications with the engineers directly, which helps us determine whether it’s worthwhile for us to set project pricing for the duration of the project.”

So in the specific case of Legacy

hub for the region, experiencing substantial jobs growth, transforming it into south-east Queensland’s second biggest employment generator, behind the CBD. The continued growth will put more pressure on key arterial roads. A motorway standard road is needed to fill the gap that exists between the Western Freeway and the Inner City Bypass. Legacy Way will meet this need.”

But the project is also an example of how major contemporary infrastructure projects are made possible by a community focus and an international team. The company responsible for the design, construction, operation and maintenance of Legacy Way, Transcity, is a joint venture between Spanish tunnelling and civil infrastructure giant Acciona Infrastructures, Italian tunnelling specialists Ghella and Brisbane’s local experts BMD Constructions.

Way, Williams says, there were plenty of occasions where, “what we would do is actually connect one of our suppliers, who also have engineers, to the relevant engineer on site, to either get a product specified or overcome something that they hadn’t foreseen, where they weren’t sure on what fixing they should be using, or whether the application for the fixing they were using was correct”.

An example of this is the relationship with CSS supplier Powers Fasteners. “There was quite a number of times where I’d get an inquiry come through where I didn’t have the capacity or the expertise to handle it,” says Williams, “so I then would call on Powers’ major projects manager, Nick Stewart.”

The benefits of working with international teams are almost always positive (despite the occasional communication challenge, which can be met by a combination of drawing pictures and pointing at things). With the project 80 per cent

complete at the time of writing, the project has also cemented networks that will benefit future infrastructure projects in the state.

“Once a project is finished, obviously, the people you’ve been working with will move on to another project, and there’s a lot of infrastructure work happening in Queensland at the moment,” says Williams. “Infrastructure was neglected for some time, so it’s taken a lot to keep up with the natural expansion of the city.”

Some of the other upcoming projects may include local L&G projects, or the upcoming BAT tunnel, which is a proposed new north-south tunnel that will deliver bus and rail together in a world-first design. It combines a railway and a busway in a single, double-decked, 15m-wide tunnel beneath the Brisbane River and Brisbane’s central business district. And with each new project, local suppliers, local communities and local construction firms all benefit.

12

S4RM/4T - 4 piece Reversible Ratchet Spanner Set. 16 sizes in 4 spanners. Sizes: 8, 9, 10, 11 / 12, 13, 14, 15 / 16, 17, 18 & 19 / 21, 22, 23 & 24mm

319 - Hi-Viz professional hacksaw frame 300mm. Strong yet light steel frame that is covered with a protective dual component plastic.

S81MIX - 81 piece 1/4” & 1/2” drive Socket Set with additional tools.

ADJUST3-90 - 3 piece adjustable wrench set. Sizes: 6”, 8” & 10”.

$140.00

$259.00

$49.00

$125.00


Members in action

Excavation works for Brisbane Botanic Gardens Mount Coot-tha (top) and TBMs prior to launch from the western worksite.

Choose Greenwww.hitachi-powertools.com.au

CN16SA• Powerful 400W motor for heavy duty applications• Lockable slide switch for user comfort• 3 positive stop die holder permits straight, right and left cutting• Lightweight and compact featuring a small grip circumference for user comfort• Punch and die service life: 300m cutting capacity for 1.6mm steel, 50m corrugated or

trapezoidal shape or 200m stainless steel plate 1.2mm• Externally accessible carbon brushes for easy maintenance and service

DH24PG(H1)• 2 mode action: hammer drilling and drilling only • Idle striking prevention mechanism reduces vibration and noise during no-load operation• Single action bit change allows for easy operation• Variable speed to suit multiple drilling applications • Large trigger and lock on button for improved useability• Excellent durability for longer service life• Forward and reversible for convenience

NT65M2(H2) • Dual function trigger for single fire & bump fire• Tool-less depth dial for flush, proud or deep driving• 360° adjustable exhaust directs air away from user• Tool-less release for clearing jammed nails• Unique integrated air duster acts as a dust gun• Replacement O-Ring kit available (885914)

KC18DDL(HJ)Kit Includes: • DV18DBL – Brushless impact (hammer) driver drill• WH18DDL – IP56 Brushless impact driver• 2 x BSL1850 – 5.0Ah Li-ion batteries• UC18YRSL – 14.4V -18V cooling charger• Twin tool carry case

• Brushless motors are 30% more efficient than conventional models as no energy is wasted through brush friction thus extending battery run time and tool life

• Electronic switches are more efficient in transferring energy and only require half the pull force of conventional switches

• Brushless motors generate more power providing higher torque levels and workload capacities

• The rotational speed selector allows multiple speeds to be selected enabling a wider range of applications over conventional models

• Water and Dust Protection rated to the international standard of IP56 dictates the model is highly resistant to the access of hazardous parts including dust protection to a point where dust will not penetrate in a quantity to interfere with satisfactory operation. Furthermore the model incorporates water protection to the point where powerful jets of water projected onto the model will have no harmful effects (WH18DDL only)

• Active Control System (ACS) is an Anti Cam-Out system which reduces driver slippage from screw heads (WH18DDL only)

1.6mm 400W Nibbler

24mm 730W SDS Plus 2 Mode Rotary Hammer

Finish Brad Nailer

2 Piece 18V Combination Kit

50549 CSS Fatmag Advertisement (290x185mm)_v2.indd 1 19/12/2014 11:49 am

ChooseGreenwww.hitachi-powertools.com.au



DH24PG(H1)• 2 mode action: hammer drilling and drilling only• Idle striking prevention mechanism reduces vibration and noise during no-load operation• Single action bit change allows for easy operation• Variable speed to suit multiple drilling applications• Large trigger and lock on button for improved useability• Excellent durability for longer service life• Forward and reversible for convenience


KC18DDL(HJ)Kit Includes:• DV18DBL – Brushless impact (hammer) driver drill• WH18DDL – IP56 Brushless impact driver• 2 x BSL1850 – 5.0Ah Li-ion batteries• UC18YRSL – 14.4V -18V cooling charger• Twin tool carry case

• Brushless motors are 30% more efficient than conventional models asno energy is wasted through brush friction thus extending battery runtime and tool life

• Electronic switches are more efficient in transferring energy and onlyrequire half the pull force of conventional switches

• Brushless motors generate more power providing higher torque levelsand workload capacities

• The rotational speed selector allows multiple speeds to be selectedenabling a wider range of applications over conventional models

• Water and Dust Protection rated to the international standard of IP56dictates the model is highly resistant to the access of hazardous partsincluding dust protection to a point where dust will not penetrate in aquantity to interfere with satisfactory operation. Furthermore the modelincorporates water protection to the point where powerful jets of waterprojected onto the model will have no harmful effects (WH18DDL only)

• Active Control System (ACS) is an Anti Cam-Out system which reducesdriver slippage from screw heads (WH18DDL only)

1.6mm 400W Nibbler


Finish Brad Nailer



ChooseGreenwww.hitachi-powertools.com.au



DH24PG(H1)• 2 mode action: hammer drilling and drilling only• Idle striking prevention mechanism reduces vibration and noise during no-load operation• Single action bit change allows for easy operation• Variable speed to suit multiple drilling applications• Large trigger and lock on button for improved useability• Excellent durability for longer service life• Forward and reversible for convenience


KC18DDL(HJ)Kit Includes:• DV18DBL – Brushless impact (hammer) driver drill• WH18DDL – IP56 Brushless impact driver• 2 x BSL1850 – 5.0Ah Li-ion batteries• UC18YRSL – 14.4V -18V cooling charger• Twin tool carry case

• Brushless motors are 30% more efficient than conventional models asno energy is wasted through brush friction thus extending battery runtime and tool life

• Electronic switches are more efficient in transferring energy and onlyrequire half the pull force of conventional switches

• Brushless motors generate more power providing higher torque levelsand workload capacities

• The rotational speed selector allows multiple speeds to be selectedenabling a wider range of applications over conventional models

• Water and Dust Protection rated to the international standard of IP56dictates the model is highly resistant to the access of hazardous partsincluding dust protection to a point where dust will not penetrate in aquantity to interfere with satisfactory operation. Furthermore the modelincorporates water protection to the point where powerful jets of waterprojected onto the model will have no harmful effects (WH18DDL only)

• Active Control System (ACS) is an Anti Cam-Out system which reducesdriver slippage from screw heads (WH18DDL only)

1.6mm 400W Nibbler


Finish Brad Nailer



13


Industry in action

As a market leader in Australia since

the 1970s, Flexovit and Saint-Gobain

have been supplying the industrial

market with high-quality products

and proudly supporting

Australian industry

Big wheels keep on turning


Opposite page: Chris Davis, manufacturing manager of Saint-Gobain.

It started from humble beginnings back in 1972, when Jeff Freeman began selling abrasives to the Australian industrial market from a shopfront

in Heidelberg, Victoria, under the company name of Durable Abrasives. In 1974, Flexovit BV Holland appointed Durable Abrasives as the sole industrial distribution agent for the Flexovit brand of cutting and grinding wheels in the Australian market, explains Chris Davis, manufacturing manager of Saint-Gobain Abrasives Australia. At that time, Roger Freeman joined the company, overseeing the development of the business alongside Jeff Freeman, with a view toward cutting and grinding wheels.

A few years later, due to popularity and market demand, the company changed its name to Flexovit Abrasives Pty Ltd, and proceeded to build its own manufacturing plant in Campbellfield, Victoria.

In 1978, the factory commenced manufacturing in Campbellfield, where it continues to operate to this day. Starting with just one press and three ovens, the company has developed significantly—now with a footprint of nine presses and 12 ovens, employing 60 staff on a three-shift operation, five days a week.

Flexovit Abrasives, under the Freemans’ direction, saw a rapid company expansion. This led to the next evolutionary step of developing sales into the Pacific region and South-east

Asian markets, as well as becoming the number-one choice for cutting and grinding wheels in Australia.

In 1988, Flexovit Abrasives (Australia) Pty Ltd was sold to Flexovit Abrasives NV, which was subsequently floated and made a public company on the Dutch stock exchange. Davis explains, “In 1999, Saint-Gobain purchased Flexovit NV and the Australian company name changed to Saint-Gobain Abrasives.”

“As part of the Saint-Gobain (S-G) company, which is the world leader in the habitat and construction market, Flexovit provides high-performance abrasive solutions for the industrial, construction, mining, automotive, aviation and DIY markets,” says Davis. “Basically, everywhere there’s a power tool used for cutting and grinding steels and masonry, we cover it.”

In supplying products to a wide variety of industry markets, S-G regards customer service as paramount to its continued success. Having a manufacturing plant in Australia allows S-G to provide unsurpassed service in terms of speed and efficiency.

“Because we’re a manufacturer, we can make local decisions when there are any changes in regional conditions, while our competitors are restrained to catalogues

or products that may suit other markets, but not necessarily the Australian market,” Davis says. Having very competitive lead times means S-G can bring products to market quickly and react if there’s a shortage of certain products.

Safety in use is of paramount importance to S-G. “With cutting and grinding wheels which can reach speeds of 290km, the personal safety of machine operators using Flexovit Abrasive wheels is of primary concern to S-G,” says Davis. As such, Flexovit Abrasive wheels are designed, manufactured and safety tested in accordance with the highest Australian and European standards.

“Being on the ground to offer educated and informed advice and support allows Saint-Gobain to work faster.”Chris Davis, Saint-Gobain manufacturing manager

“Safety in use is our number-one priority,” says Davis. All cutting and grinding wheels conform to Australian Safety Standards AS1788.1-1987 and European Safety Standards EN12413. In addition, Saint-Gobain is a founding member of the Organisation for the Safety of Abrasives (oSa)—a voluntary organisation governing the European abrasives industry that sets very strict rules for manufacturing processes, with on-going product testing carried out during production to ensure that wheels comply with the highest safety standards when in use. These standards create consistency in the manufacturing process, which is another key factor in the Flexovit success story. “The industrial market relies upon and expects a consistent quality of product, and because our manufacturing processes are aligned to this, it helps us offer solutions that provide quality and consistency,” says Davis.

During manufacturing, S-G considers caring for the environment to be a major priority. It maintains its plant in Australia so that it is compliant with ISO 9000:2008

16

Industry in action

Being local means that Saint-Gobain can react quickly to market demands.

As an example of its dedication to innovation, S-G offers on-site support for both industrial and retail customers, including dedicated sales teams. “S-G has a team of dedicated application engineers, or AEs, who are specifically tasked to work with end users, visiting you on-site to offer technical or efficiency gains in your work environment.”

By having trained AEs working directly with customers and end users, S-G endeavours to get the best value and finish on applications, while providing product use and safety instruction wherever applicable. Quite often, such visits lead to better solutions for the users of Flexovit products, based on detailed examinations of the tasks being conducted. “Being on the ground to offer educated and informed advice and support allows S-G to work faster,” says Davis. “It’s a faster way of offering solutions, which gives S-G the ability to leverage other AEs around the world who have similar experiences. This level of expertise and technical support for customers is unparalleled. As we know,

and Environmental Management AS/NZ ISO14001:2004 standards.

S-G has been able to continually grow and innovate by reacting quickly to the market. Davis says,“S-G has a plan to continually invest in new plants and production processes that ensure it can deliver cost-effective solutions that are relevant to the customer needs and which continue to grow the business in Australia.”

WHEELS & CASTORS

60mm diameterload capacity: 40kg




code: S3036 code: S3040

code: S4404Bcode: R4405

$15.00

$22.00 $75.00

$20.00

$39.00 $75.00



code: S8861 code: R8862


without SJS

Makita used the science of earthquake

engineering to introduce the safest heavy-duty

power tools available with vibration ratings

nearly 50% lower than comparable products.

AVT uses the science of dynamic dampening to

dramatically reduce rotary vibration and at the

same time increase impact power by up to 75%.

The new SJS II leaf spring system is positioned

closer to where vibration is generated, this

supresses it from traveling through the tool

reducing operator fatigue.

REDUCE YOUR EXPOSURE TO VIBRATION & FATIGUE

SUPPRESSION OF MOTOR SPEED

DURING NO-LOAD

ACTIVE DYNAMIC VIBRATION ABSORBER

UNDER LOAD

GA4540C

HM1317

GA5040C

HR5212C

GA5041CN01

HR4013C

SUPPRESS VIBRATION

17

one abrasive does not fix all solutions. In thin wheels alone, we have 400 different wheels, so it is not as simple as one size fits all. Even a small change in formulations can bring big productivity gains to end users.”

S-G’s continual innovation and impetus to excel has never been more apparent than in its recent investments in technology and the brand. “In 2012, S-G made significant investments in machinery to increase production efficiency of Australia’s largest selling wheel and, over the next 18 months, further investments will be made in automation and process improvement,” says Davis.

As the only manufacturer of thin wheels in Australia, the S-G factory proudly employs local staff in Victoria, producing millions of wheels a year.

“S-G has an operation in Australia with modern, world-class equipment and a strong commitment to quality, with a dedicated work force,” states Davis.

S-G made a further commitment in November 2014, with the Australian Made campaign. “We want to keep Australia

working by promoting and supporting the local manufacturing sector and exporting of Australian Made products,” explains Davis. The iconic green-and-gold logo will appear on all wheels manufactured in the Campbellfield plant.

If that wasn’t enough, S-G has also launched a new range of rail cutting wheels. “With high-carbon steels now being introduced in the market, we have added to our extensive range of products, with a softer wheel formulation that will cut hardened steels faster. Often in the rail maintenance industry, timeframes are restricted for the line work and track work and faster cutting solutions are required—which we can now offer.”

There’s no slowing down for S-G. The goal for 2015 is to continue to be the market leader in Australia for the complete range of abrasives for any application, including reinforced cutting and grinding wheels, flap discs and wire brushes, and Norton bonded and coated abrasives, as well as a range of surface blending and tape products, diamond cutting blades and machines for masonry applications.

18

Industry in action

Saint-Gobain is the market leader in abrasive cutting and grinding.

• Pro Series 7pc set with Phillips/Pozi/Flared/Parallel screwdrivers• Chrome vanadium steel bar for ultimate strength• Soft grip handle moulded directly to shaft• Magnetic tips• Colour coded handles• Robust, heavy duty case – VIRTUALLY UNBREAKABLE!

LEGENDARY BUILD QUALITY &CONTEMPORARY STYLING

2 TRADE SPOT MARKING PAINT

$75.90Special Price:

FEATURES• Lead free• Professional quality hi-visibilty colours• 350g aerosole can• Ideal for marking out roadworks, building sites, grass and sporting areas• Use on asphalt, dirt, concrete & timber• Unique trigger cap for easy, safe inverted marking

Product Code Size / Colour

OX-T022501 350g / Blue

OX-T022502 350g / Fluro Green

OX-T022503 350g / Fluro Orange

OX-T022504 350g / Fluro Pink

OX-T022505 350g / Fluro Red

OX-T022506 350g / White

OX-T022507 350g / Fluro Yellow

1 PRO SCREWDRIVER SETS OX-P360207 3 PRO HEAVY DUTY

PRY BAR OX-P092856

FEATURES• Powder coated finish all steel• Hardened steel claw• Ideal for prying formwork• 56” / 1425mm

FEATURES• Reversible• Low vibration• Heavy duty construction• Heavy duty shock mounting reduces vibration• Vibration isolated reversible handles• Protective frame• Vibration Frequency (VPM) of 4500(OX-PC100), 5600 (OX-PC60)

• OX-PC60 compact unit ideal for landscaping• Honda GX160 4 stroke engine

Product Code Weight (kg) Plate size (mm) Centrifugal Force (kn)

OX-PC100 98 600 x 460 19.8kw



$1,485.00Special Price: FROM

4 PRO PLATE COMPACTOR

Product Code Weight (kg) Plate size (mm) Centrifugal Force (kn)

OX-PC60 62 525 x 350 10.5kw

Special Price Pack of 12


• General purpose cutting-off wheels for use on ferrous metals• Available in sizes 100mm, 115mm, 125mm, 180mm & 230mm diameters• Made in Australia

Norton XTreme Life Blaze R980P Flap Discs are engineered for the metal fabrication market where durability and life are required for grinding stainless steel and other hard to grind metals: cobalt, chrome, inconel & titanium.The latest generation R980P grain, with improved polyester backing and supersize grinding aid distinguish this flap disc from all others on the market today.• Available in sizes 100mm, 115mm & 125mm diameters and grits 40, 60 & 80

DUO EXTREME+ is the fastest cutting Diamond Blade in the Norton Clipper range. It is up to 20% faster than the previous version and the increased segmet height along with improved specification prolong product life by up to 20%. Reduced vibration and improved cut rate reduce fatigue and produce a higher quality precision cut.• Available in sizes 230mm, 300mm & 350mm diameters

Flexovit, Norton, Blaze and Clipper are all registered trademarks of Saint-Gobain Abrasives Pty LtdAll prices quoted include GST Ref. 610-1114

$160.00 ea (230 x 22.23mm)

From

$7.50 ea (100 x 16mm)

From

$1.50 ea (100 x 2.5 x 16.0mm)

From

19

20

12459Can be used as a Broom or Squeegee- 24’ Hard Plastic Head- PVC Hard Bristles- Metal Frame for more Head Support- 25mm x 1.5m Wooden Handle with

Alloy Screw Head

24” MULTIPURPOSE BROOM

From $5.00 Per Pack(CT48160)

Code

CT48300

CT48160

CT48200

CT48250

Description

4.8mm x 300mm Black Cable Ties

4.8mm x 160mmBlack Cable Tie 4.8mm x 200mm Black Cable Tie 4.8mm x 250mm Black Cable Tie

Qty Per Pack

100

CT48400

CT48350

4.8mm x 400mm Black Cable Tie

4.8mm x 350mm Black Cable Tie

100

100

100

100

100

CABLE TIES

10084

- Dispensing sealants in 600ml Sausage/ Tubes/ Sachets

- Heavy Duty

- Tradesman Quality

SAUSAGE BARREL GUN

10080

- Swivel Head - Heavy Duty- Quick Release- Tradesman Quality

300 MM CAULKING GUN

1 - 62.5 metre x 20mm Coil1 - Box of Heavy Duty Buckles1 - Ratchet Tensioner1 - Manual Tensioner1 - Instruction Sheet1 - Tool Box

STRAPPING KIT

KIT INCLUDES:

Product Benefits - No sharp edges.- Coil weights ¼ the eight of steel strap coils.- Will not rust, stain or damage product.- Can be cut while under tension without the possibility of recoil injury.- Strap stays tight and does not loosen.- Ability to retension strap and reuse strap.

P.O.A


HAND TOOLS & FORMWORK

READY-MIX TRUCKS

WINDOWS & FRAMES

MACHINERY

Available in 750ml & 5Ltr Spray Bottle & 20Ltr Container

Crete-Off is a nontoxic, biodegradable, “environmentally green” liquid designed to dissolve the portland cement component in concrete, mortar, thin set, grout, and other portland cement based products.

IT CONTAINS NO ACID. Crete-Off will not harm painted surfaces, tools, metal surfaces, plastic surfaces, or any type of plants or vegetation. It is easily neutralized and diluted with water. It is fast-acting but not instantaneous, so correct application of the liquid to the material is the key to success. It is a labor-saving product designed to be operator safe and to eliminate hammering, scraping and acid-washing of tools, equipment, and building surfaces.

The Acid-Alternative Concrete dissolver

CRETE-OFFCONCRETE DISSOLVER

Dissolves & cleans CONCRETE and CEMENT from:

From

$22for 750ml

inc.GST

M18 LED LANTERN / FLOOD LIGHTM18LL-0

• TRUEVIEW™ - High definition lighting solution.

• 180° - 360° adjustable beam for customised lightingsolution.

• 2.1A USB charger to charge tablets, phones and otherelectronic devices.

M18 5.0AH REDLITHIUM™ BATTERYM18B5

• REDLINK™ intelligence. Provides optimised performance andover load protection.

• Best in class construction. Offers long lasting performanceand durability.

• Fuel gauge on board. Displays remaining run time for lessdown time on the job.

M18 LED INSPECTION LIGHTM18IL-0

• TRUEVIEW™ - High definition lighting solution.

• Forward and backward pivoting head thatoffers 180° of coverage.

• Rugged design with a chemical resistant body.

• Powered by REDLITHIUM™ battery technology.

M18 FUEL™ 184mm CIRCULAR SAWM18CCS66-0

• A cordless circular saw that has rippingcapabilities of a corded saw.

• Milwaukee® patented POWERSTATE™brushless motor provides superior cutting power.

• REDLINK PLUS™ electronics gives totalsystem communication between tool, battery and charger.

M18 CORDLESS 18G SINGLE CUT SHEARM18BMS-0

• Patent design MILWAUKEE® 4-Pole motor.

• REDLINK™ intelligence electronics ensures optimisedperformance and overload protection.

• Powered by REDLITHIUM™ battery technology, deliversmore work per charge.

REDLITHIUM™ PROTECTION

WATER THERMAL IMPACTELECTRONICS

* When compared to previous Milwaukee® REDLITHIUM™ batteries.

MORERUN-TIME / POWER / LIFE

C

M

Y

CM

MY

CY

CMY

K

21


We’re back to the workshop to meet more of the Garry Rogers Motorsport team—in particular, the guys responsible for making the race car lighter, faster and better.

Garry Rogers MotorsportThe building of a race car: Part two

Building a race car


Just as revolutions in a car’s engine are measured each minute, the revolution of building a race car can be

measured almost as often. “Racing is full circle all the time,”

says Les Creely, workshop manager of Garry Rogers Motorsport (GRM). “You race—you hopefully don’t crash—you come back and repair the car, then you go racing again.”

one is coming up with the decisions. We hope.” And it is the engineers (and drivers) who keep Scotty and his team continually busy. “Engineers are always chasing the lightest component for the car, while maintaining as much strength as you can. And that’s constantly evolving, constantly changing and I am always looking for new materials, new ways to try and overcome wear on the undertray and making things as light as possible.”

Repairing the undertray is one of the most common jobs for the composite department. “This happens at every race, every round,” says Scotty. “Rear impact is also very common, because cars are driving into each other.”

It’s a fact of racing, but when collisions happen, Scotty and his team have to make sure there is a replacement part ready to go. “I used to get precious about my parts when I first started, and when I watched a race and something got busted I would be like, ‘Oh God’, but now I just think, ‘Well, they’re keeping me in the job!’”

However, there are still some nail-biting moments. “I do get nervous watching racing and seeing our cars go around, thinking, ‘Is it going to hold together?’ You don’t want the phone to ring and hear someone say, ‘These front bars are cracking and falling to bits’. In fact, when a car has an accident and a component flies off, this is a good thing because if it stays on and flaps around, the car will get called in for a black flag. Then your race is done and dusted—you’re back in the pit lane.

After the race, the cars come out of the truck to be serviced and need to be turned around in a few days—before the next race starts.

Back in February 2014, the ante was amplified by the switch from building Holden race cars, to building Volvo

S60s. “From a project point of view, going from Holden to Volvo, there was a lot of consultation with engineers, in particular Scotty Campbell whose job is to get the body shape right.”

While Volvo wanted the race car to look as much like the road car as possible, it was Campbell’s goal to make it as fast and light as possible.

Creely knows this acutely because it’s his job to make sure every department at GRM has what they need. “There’s a lot of organisation. I basically get all the bits and pieces for everyone, so they’ve got all the components for their car.”

What he means is the thousands of parts that make up a race car, distributed to 39 full-time GRM staff who build the vehicles from scratch.

“From our point of view, everything is very time-controlled. You can’t afford to miss anything because the race starts without you—the car has to be ready.”

To pinpoint where the process starts is hard to define. You see the cars are continually being built and rebuilt—in many cases, every few days.

“The pit opens at 10am and it’s just go, go, go,” says Creely. “Every single item has to be ready two weeks before that deadline—that goes for everyone involved.”

Starting with the engineers, “who we affectionately call the propeller heads”, says Creely, “they come up with their demon ideas and will say ‘we want to make this component’, and they’ll draw it up and give it to me. So I’ll get it made, give it to them to test, try it out on the car. If it works, great, we’ll order another 10. If it doesn’t work, we’ll put that on the shelf and they’ll come up with some other great idea.”

The engineers are constantly testing everything—in the workshop and at the track. They’ll double-check maintenance of the shocks, change all the valving in it to go to the next track—which will be a different track altogether. It’s up to the engineers to get all the data from the race, download it and analyse it, and come up with where the car needs to be if they come back to that track next year. They’ll look at what the car did and didn’t do, what the temperatures were … It’s a complex process—certainlynot as simple as going in and cleaning some parts and sending them back.

You could say the propeller heads are what keep the cycle of the race car in motion. “There are two engineers per car for racing. One is a data collector and one is your race engineer,” explains Scott ‘Scotty’ Compson, manager of the composite department. “So one is deciphering information and the other

“We maintained the integrity of the S60 so people could recognise it on the track. The challenge was to make it all fit. For example, you still have to fit the wheels under the mudguards, panels are subtly modified—so the actual shape has changed quite a bit to make it work,” says Scotty Compson. The two Scotts worked together looking at how they were going to build each component as light, strong and efficiently as possible, as well as factoring in how to make the moulds suit the manufacturing processes.

But it’s not just Scotty and his team who are constantly evolving. Every race team is trying to evolve faster than the competition.

“Scotty is very particular with his job,” says Creely. “Everything

that comes out of his composite department is first class. If you look at the other teams’ components—which we have—we’ve had the advantage of looking at other teams’ components over the years and the stuff that comes out of Scotty’s workshop exceeds their quality tenfold.

“Scotty is very humble, but he’s incredibly good. Even when we take things to the painters to get sprayed—painters who do the same for other race teams—they just admire our work because it’s so easy for them to put paint on. They don’t need to have to re-work it or mess around with it. We’re not trying to pump up our own tyres, but a lot of people struggle to achieve the standards these guys do,” says Creely.

It comes back to great teamwork and a dedicated crew. As the GRM team prepares for its next race, it’s all hands on deck. Don’t miss the next issue where we get the rundown on what happened behind the scenes during the 2014 racing season.

24

MIG186

DISPOSABLE GAS BOTTLES

• Gas/Gasless Operation

• Euro Connect Torch

• Six Voltage Settings

• 1- 5Kg Spool Capacity

• Single Phase 240Volt

• Dinse Connection Earth Lead

• Spool Gun Ready

• Thermal Overload Protection

Portable and robust MIG welding machines, that boast excellent performance characteristics and feature a euro connect torch for direct wire drive, coupled with a solid metal drive assembly which makes them the perfect choice for your next welding project. Manufactured under strict quality control methods. The easy to use, Bossweld MIG 186 is perfect for all 240Volt applications including light fabrication, farm maintenance, factory maintenance & repair, as well as the serious home user and hobbyist.

15 AmpPlug

11Ye

ar Warranty

1Year Warra

nty

Code Description Price inc GST

600040 100% Argon Disposable Gas Bottle 1L $30.95

600032 100% Argon Disposable Gas Bottle 2L $64.95

600042 100% CO2 Disposable Gas Bottle 1L $30.95

600034 100% CO2 Disposable Gas Bottle 2L $64.95

600041 80% Argon 20% CO2 Disposable Gas Bottle 1L $30.95

600033 80% Argon 20% CO2 Disposable Gas Bottle 2L $64.95

600043 Guage--less Disposable Gas Bottle Regulator $27.75

600044 Disposable Gas Bottle Regulator $32.95

The BossGas Disposable Welding Gas Bottle range is compact, economic, lightweight and is a cost effective and simpler option to the large indus-trial size cylinders. Eliminating the need for continuous gas bottle rental, the BossGas Disposable Gas Bottles are a fantastic alternative for the occasional welder and home handyman.

INC

GST$500.00

P/N: 600186

Building a race car

It’s a team effort at GRM

“We maintained the integrity of the S60 so people could recognise it on the track. The challenge was to

make it all fit.” Scotty Compson, GRM composite manager

13 pce SDS Set

18 Volt Cordless Mitre Saw

18 Volt Cordless Sliding Compound Mitre Saw

619000850

KS 18 216 LTX SK• Compact, ergonomical and lightweight for mobile use• Cutting line laser and worklight with power saving auto switch off• Large, clear visible measurement scale• Robust die-cast aluminium• Highly effective dust extraction• Precise angle settings• Extendable cutting table• High slide rear fence• Quick blade change• Tool Only-Batteries not included

619001850

KGS 18 216 LTX SK• Compact, ergonomical and lightweight for mobile use• Cutting line laser and worklight with power saving auto switch off• Sliding function for wide work pieces.• Large, clear visible measurement scale• Robust die-cast aluminium• Highly effective dust extraction• Precise angle settings• Extendable cutting table• High slide rear fence• Quick blade change• Tool Only-Batteries not included

18 V 2 Piece KitAU68901130

SB 18 LTX BL - KSA• 90 Nm Brushless Hammer Drill• 165mm Circular Saw• 2 x 5.2 Amp Hour Batteries• ASC 30-36v Charger• Carry Bag

Ø355mm 2,300w Cut Off Saw+Bonus 1080w 125mm Angle grinder AU60233519

CS 23-355• 4,000 rpm• Max. cutting:Ø 65mm bar steel, 125mm pipes, 115-130mm shape steel• Max. opening of vice jaws: 238mm

AU60220560

SSW 18 LTX 400 BL12 Tourqe settings: Max 400Nm2 x 5.2Ah batteries,charger & case

Square Drive Impact Wrench

600398190

W 12-125 Q• Marathon Motor• Mechanical Safety clutch• Quick Nut - easy disc change,no tools required• Anti Vibration handle• Auto Stop Carbon Brushes

Ø125mm 1,250w Angle Grinder

$665

$379

$299

800w Rotary Hammer SDS PlusKHE 3251 600659190• 3 x mode - Rotary hammer drilling, drilling,chiselling• Drill ø Steel: 13mm/ Wood: 35mm/ Conc: 32mm• 0-1,150 rpm• 4,470 Bpm• 3.1 joules• Safety Clutch - prevents kickback• Auto Stop Carbon Brushes• Quick change chuck - 3 secondsIncludes: Side handle, depth stop, carry case, metal keyless chuck

$59910 cutting discs


25

26

Flexovit is a registered trademark of Saint-Gobain Abrasives, Inc.

YOUR SAFETY MATTERS

Proudly made in Australia since 1978

Australia’sfavourite

wheel

Ref

: 597

-111

4

C

M

Y

CM

MY

CY

CMY

K

Flexovit Ad 185x290+3mm Australian Made 2014 597-1114 v02.pdf 1 18/12/14 1:52 PM

COMPACT AND POWERFUL Hitachi is proud to announce the release of an all new 125mm (5”) angle grinder to the already popular Hitachi angle grinder line up.

The G13SW features a powerful 1200 watt motor which provides a high level of power and performance. Its compact 202mm slim grip housing design is combined with low weight at only 2.3kg offering greater control and helps reduce user fatigue during prolonged use.

The G13SW is supplied with a two position anti-vibration side handle which also has a soft grip finish for greater ergonomics. For added versatility and ease of use there is a conveniently positioned slide on/off switch which is easily accessible on the side of the grinder. The spindle shaft lock button allows for hassle free and quick wheel changes, while the tool-less wheel guard offers users added convenience when changing the direction of the guard is required.

The G13SW has also been engineered with a high level of overload and dust protection which is designed to help increase the service life of the tool. All this comes complete with a sturdy carry/storage case to protect the tool when not in use, a 125mm grinding wheel and clamp nut wrench.

www.hitachi-powertools.com.au

Hitachi also offers a 3 year commercial warranty and a comprehensive range of genuine Hitachi accessories to suit which include grinding and cutting wheels.

For more information on the new Hitachi G13SW 125mm (5”) angle grinder please visit www.hitachi-powertools.com.au, follow on Facebook and YouTube or call 1300 444 822.

50547 CSS Fatmag Advertorial - Grinders v2.indd 1 19/12/2014 11:38 am

TSHD Heavy Duty Turbo Shear

$250

Get a ClimbMax Ladder on your roof

TSCM Corrugated Metal Cutting Shear

$195 $175

TSF2 Fibre Cement Cutting Shear (up to 13mm)

LAD8096 Ladder F/G Platform 3 Step 150kg $220.00





LAD8904 Wheel Kits for LAD8096, 8126, 8156 $55.00

LAD8906 Wheel Kits for LAD8186, 8216 $55.00

LAD8090 Ladder Al Platform 3 Step 150kg $210.00





All prices include GST 27


Tech talk

Getting the waterproofing wrong can be the most costly and difficult thing to repair on a job. So how do you ensure you’re getting it right the first time?

High and dry


Don’t underestimate the importance of water. According to Scott Sandford, target market manager,

waterproofing, at Sika Australia, the simple act of not getting waterproofing right is enormously costly. “It’s fairly common knowledge within the building industry that water ingress is the largest contributor to building maintenance costs,” he says. “More than 80 per cent of building claims are associated with water ingress. If left unattended over time water ingress can cause structural ramifications—the structural capacity of the building can degrade.”

Waterproofing is a complex issue, and can be very costly to identify and fix. Frequently, the starting point for remedial work involves destroying other work. So it benefits all involved in construction work to be across the parts of the National Construction Code and relevant Australian standards.

“For example, there’s AS 3740, which deals with domestic wet areas, and there’s also AS 4654 which is for external areas,” explains Sandford. “AS 4654 has a point one, which deals with product requirements and specification, and a point two, which addresses the detailing and installation requirements of the products. I think the most important thing to be across is AS 4654.2 because when it comes to waterproofing, invariably where you have issues is less about the product and more about the installation. It’s also important to deal with a reputable supplier with ISO9001 quality management systems, whose products are compliant with the relevant national or international standard, and can provide technical support.”

Which is an issue for all material advances in the field—there are individual variables on every job, says Jeff Kirkley, Bostik’s national market development manager tiling.

“Bostik can offer you a complete waterproofing system,” he explains. “Problems can arise when you get on site and there are multiple metal, timber and concrete substrates, or other substrate materials involved. That’s why it’s far better for us to be involved on site at the design stage. We can help

The recently formed Australian Institute of Waterproofing has taken some steps towards addressing the potential problems in application, offering training packages and technical advice with a view to raising the overall standard of work in the waterproofing industry.

On its website, it states: “All too often we find the waterproofing details on project specifications are non-existent or very lacking in proper details. We find the waterproofing lumped in with all sorts of other items such as tiling, painting, plumbing, structural engineering and such. A particular material may or may not be the ideal product for the job in some or most cases and is used only because it’s handy and in stock. We all should be looking further afield for specific products that are best suited for the job at hand in the first instance.”

“A national standard or trade recognition would help raise the standard of waterproofing,” says Sika Australia’s Scott Sandford. “There is currently no AS/NZS standard that addresses sub-grade waterproofing. BS8102:2009 is a code of practice that provides a holistic approach to the protection of below-ground structures from groundwater.

assess the installation and make the best suggestions. For instance, if there is inclement weather pending, we have a product called Dampfix PU. This is a full polyurethane, which means you can apply it on a dry substrate, and even if it rains five minutes later, it will not wash away. Whereas the more common high performing water-based acrylics, like Dampfix Gold and Dampfix 3, need to fully cure for approximately 24 hours before they are completely waterproof.

Hard rain on a newly applied acrylic membrane can pierce the product’s skin, causing uncured resin to be washed down your facades and drains. This can cause it to plug or block the drain. This is due to these products requiring to fully cure before becoming 100 per cent waterproof. All water-based systems, while being the most high performing and cost effective, need to fully evaporate to cure.”

His confidence comes from the degree of research and development into all new products manufactured in Australia by Bostik. “All product development is done through our R&D lab in Sydney. This is Bostik’s centre for excellence in the southern hemisphere,” says Kirkley. “We make sure we exceed the standards and not just match them. Once we go into full production of a new product, every batch is QC-checked before it’s deemed fit for sale.”

“More than 80 per cent of building claims are associated with water ingress.”Scott Sandford, Sika Australia target market manager, waterproofing

Waterproofing need to know

These are the documents you need to be familiar with before undertaking

any waterproofing work:

n National Construction Code Volume 1 (pages 79-80 and 316-322)

n National Construction Code Volume 2 (pages 59-61 and 345-351)

n Australian Standard 3740-2010 Waterproofing of wet areas within residential buildings

n Australian Standard 4654.1-2012 Waterproofing membrane systems for exterior use—above-

ground level part 1: Materials.n Australian Standard 4654.2-2009 Waterproofing

membrane systems for exterior use—above-ground level part 2: Design and installation.

It recognises the importance of having all stakeholders, including architects, engineers, builders, materials suppliers and sub-contractors involved in the creation of a robust waterproofing specification. According to BS8102, the specification should include redundant waterproofing systems. This recommendation is often overlooked and is crucial in limiting unforeseen costs in the event of construction issues.

“A common phrase you hear is ‘We don’t have the budget’, yet remedial costs far outstrip those of using redundant systems,” says Sandford.

“This is why Bostik confidently offers a 10-year manufacturer’s warranty,” says Kirkley. “The tradesman also needs to give an application warranty.

“Unfortunately, there’s currently no enforced requirement to have a waterproofing licence in Victoria. Until this changes, it’s left up to the individual applicant to warrant his/her application. More builders and designers are seeking a system warranty, so whenever we do

waterproof demonstrations, we offer applicants a draft copy of an application warranty. They can insert their own business name, their ABN or ACN, and contact details. This is what a builder or a project manager wants; the applicant can set themselves apart from the pack by offering a complete system warranty.”

Kirkley adds that’s why it’s important, no matter which group of products you’re going to use, that you look for an overall brand system that can be warranted, rather than chasing multiple suppliers around if something goes wrong. “The problem you’ve got is that we don’t test everybody’s product every week,” he says. “So if they change

something in their membrane to give it more water resistance, more elasticity, and it affects the adhesive bond strength, they adjust their adhesives to adapt for that. If we don’t know and they put our adhesive over it, then there’s a chance it could be an issue. This is why a complete single brand system approach is always the best practice.”

As the Australian Institute of Waterproofing points out on its website: “The budget usually will dictate what will be spent on the waterproofing, but as professionals in the industry providing a service that is critical in the overall build of any project, we must insist on the correct product and application process be undertaken in every instance.”

30

Need a waterproofing system?

CONTACT YOUR LOCAL CSS MEMBER TO ARRANGE A BOSTIK SPECIFICATION OR FOR TECHNICAL ADVICE.

Tech talk

“A complete single brand system approach is always the best practice.”Jeff Kirkley, Bostik national market development manager tiling

aus.sika.com1300 22 33 48

WATERPROOFING AND SEALING SOLUTIONSFOR ANY APPLICATION

Sikaflex®-PROHigh performance

polyurethane joint sealant

Sikalastic®-487High performance, low VOC

polyurethane membrane

Sikalastic®-488Single component

trafficable membrane

Sikalastic®-560Highly elastic, eco-friendly polyurethane membrane

Sikatite®-BEAcrylic based, bitumen

waterproofing membrane

Sikasil®PROProfessional, sanitary grade kitchen & bathroom sealant

























31

32

Break for FreedomUltimate

WINthe

Fat Chance PromoCRAB CLAW ISLAND

FEBRUARY TO MARCH 2015


WINthe




WINthe



33


WINthe



Advertorial


Crab Claw Island Resort is in the business of creating memories, and creating a space where you can take the

time to escape, enjoy, experience…

Crab Claw Island

Nestled on the water’s edge, Crab Claw Island Resort is a relaxing escape from the everyday. The complex

has elevated cabins connected by walkways through the trees and palm gardens; refreshing swimming pools; an elevated open restaurant with views across the harbour; boat ramp; wildlife and natural beauty galore.

Crab Claw Island Resort is in the business of creating memories, not selling beds or beer or meals or fishing bait, but creating a space in people’s lives that they can look back on in years to come and smile. This is all about providing a consistent, high quality, service experience for visitors.

Crab Claw’s ‘Island’ restaurant is open for breakfast, lunch and dinner, serving a wide selection of tasty, à là carte meals. The fully licensed bar holds a selection of wines, icy cold beers and soft drinks that will quench

the thirst and cleanse the palate of any weary traveller.

All resort accommodation is air-conditioned, with an en-suite, linen, towels, ceiling fan, fridge and balcony. Rooms are configured to hold a double and two single or a double and four single beds.

There are 19 shady, limited power caravan and camping sites situated 75 metres from the water’s edge and boat ramp. BBQ facilities are available.

Crab Claw Island is a perfect place to launch your boat and access the Arafura Sea. Located at the base of Bynoe Harbour, Crab Claw Island is sheltered from all but the worst of the tropical weather. Our private, concreted boat ramp enables you to easily launch and retrieve your boat, even when it’s windy.

Bynoe Harbour hosts some of the best fishing grounds in the Northern Territory. Five islands are nestled in the mouth of the Harbour and the harbour coastline is made up of mangroves, fringing and sub tidal reefs, sandy beaches, seagrass and mud flat/sand flat habitats.

An artificial reef constructed from the former Crab Claw Resort Jetty

that was damaged by a cyclone and subsequently demolished, is now home to huge Jewfish, which is accessible by small boats.

The tidal creeks and gutters play host to the famous Barramundi, Salmon, Mangrove Jack, Bream, Prawns and Mud crabs while Snapper, Mangrove Jack, Javelin, Tarpon, Mackerel, Trevelly can be found around the oyster rock outcrops. The in-shore and off-shore reefs are great places for larger specimens of Golden Snapper, Coral Trout, Jewfish, Tuna, Groper, the odd Red Emperor—all of which will put up a magnificent fight.

Crab Claw Island offers exciting experiences year round. Many visitors stay for the first time during the most popular time of year, May to October, the ‘dry season’. It’s the perfect time to fish, relax by the swimming pool or walk through the cycad forest. Our visitors often return to experience the vibrancy of the ‘tropical summer’ from December to March. Crab Claw Island Resort is open all year round with something unique to offer to everyone as the seasons change. For more information visit: www.crabclawisland.com.au

Crab Claw Island offers exciting experiences year round.

30L WET/DRY VACUUM509686

• Stainless steel tank• Powerful 1500w motor• 2.5m hose• 5m cord length• 35mm accessory diameter• Sync socket for power tool

operation

$19900

A&AAbbott

&

Ashby6” INDUSTRIAL BENCH GRINDER

500831

• 150mm x 25mm wheels• 280w - 240volt 10amp plug• Includes heavy duty safety eye

shields and tool rests• Capacitor start, powerful induction

motor• Sealed for life bearings, vibration

absorbing pads on base• Weight 10.3kg

A&AAbbott

&

Ashby8” INDUSTRIAL BENCH GRINDER

500833

• 200mm x 25mm wheels• 600w - 240volt 10amp plug• Full 3/4HP PLUS• Includes heavy duty safety eye

shields and tool rests• Features 50mm wheel guards

to accept the use of wire wheels without fouling.

• Weight 23kg

20M AIR HOSE REEL701150

• 180° swivel rotation• Includes 20m hose & fittings• Convenient carry handle• Automatic Rewind• Secure storage of your hose and allows you to extend

and retract your hose without kinks and knots

1HP X LITE NAILER COMPRESSOR

OIL FREE501222

• 1.1hp Induction motor• 10amp plug• Can you be run off a

2.4KA generator• Very quiet operation - only 85dB• High pressure 135psi (9.3bar)• Dual air outlets with nitto style couplers• Indexing pressure regulator for precise control• 9.5L aircraft aluminium alloy twin tanks• Light weight and portable - only 13.5kg• Will operate one framing nail gun or

two fixing nail guns continually

GENERATOR 8.125KVA REMOTE ELECTRIC START507461

• 8.15 Kva 15HP sine wave generator• Powerful 15HP 4-stroke petrol engine• Remote electric start• Genuine “Senci” copper wound alternator• Thd <5%• Low distortion sine wave output to a wider variety of

applications.• Wheel mount for easy portability• Dual pole main switch for added safety• Automatic Voltage Control (AVR) for output regulation• 240V & 12V outputs for versatility• Three power outlets with

protective flaps• Digital volt/

hour meter for monitoring voltage, frequency, run time and total hours

$11500

$9900 $19500

$39900

$1,49500


35

36

All prices include GSTAll prices include GST

All Prices include GST.

3/4” DRIVE IMPACT WRENCH NEW• Torque: 1,500

ft/lbs • Speed: 5,500rpm • Decibel: 79 • Length: 220mm • Weight: 4.6kgSM45-4057G

1/2” DRIVE IMPACT WRENCH NEW• Torque: 900 ft/lbs • Speed: 8,000rpm • Decibel: 87 • Length: 170mm • Weight: 2.7kgSM43-4037G

3/8” DRIVE IMPACT WRENCH NEW• Torque: 400 ft/lbs • Speed: 11,000rpm • Decibel: 77 • Length: 156mm • Weight: 1.6kgSM41-4017G

244 Piece AF & METRIC TOOLKIT• 9 Drawer Tool Box with BBS• 7 Drawer Rollaway Cabinet with

BBS• 7 Vacuum Formed Inserts• 1/4, 3/8 & 1/2” Drive Socket Sets• Combination Spanner Set• Assorted Pliers• Various Screw-

drivers• Adjustable

Wrench• Punch & Chisel

Set• Hacksaw &

Hammer• Plus Much

More...ATK960BB

12 Piece 1/2” DRIVE DEEP METRIC IMPACT SOCKET SET• 10, 12, 13, 14, 15, 16, 17, 18,

19, 21, 22 & 24mm11315-2

8 Piece 3/4” DRIVE AF IMPACT SOCKET SET• 1”, 1-1/16”, 1-1/8”, 1-1/4”, 1-5/16”,

1-3/8”, 1-7/16” & 1-1/2”11700

8 Piece 3/4” DRIVE METRIC IMPACT SOCKET SET• 24, 27, 30, 32, 34, 36, 41 & 46mm11701

10 Piece 1/2” DRIVE DEEP AF IMPACT SOCKET SET• 7/16”, 1/2”, 9/16”, 5/8”, 11/16”,

3/4”, 13/16”, 7/8”, 15/16” & 1”11311

$595.00

$95.00 $99.00

$220.00

$150.00 $150.00

$220.00 $1585.00

MATERIALS HANDLING

250KG Safety Step 200kg P Handle Trolley

290mm x 1500mm Conveyor Frame

290mm Conveyor Stand

290mm Nylon Conveyor Roller

200kg Scissor Lift Table

code: SSR001 code: PHR103

code: CGR104 code: CSR003code: CRR500code: SLR001

$59.00

$399.00 $135.00

$49.00

$13.50 $105.00All prices include GST


SHOVEL - POST HOLE TRADE OAK Trade Quality Strong Oak Timber Handle 2mm Carbon Steel Head Head Size - 275mm X 200mm Reinforced Collar FSC Certified Handle

SJ-OPHS - $29.95

CONCRETE RAKE – LIGHTWEIGHT ALUMINIUM Aluminium Head and Shaft Shaped Head for Added Functionality Head Stays for Rigidity

SJ-CPR - $34.95

BRICK HAMMER – ALL STEEL 24 Oz (680g) All Steel Brick Hammer Forged One Piece Head and Handle Grip Mechanically Pinned to Shaft Dual Material Soft Grip Handle Fully Polished Head

SJ-BRH24AS - $24.95

CLUB HAMMERS – WOODEN HANDLE Genuine Hickory Handle Heat Treated Head Cylindrical wedges for Added Safety

SJ-CH3W - $16.95SJ-CH4W - $19.95

SHOVEL - ALL STEEL - D HANDLE All Steel Construction Extra Long 30” For Extra Reach Head Size - 300mm x 255mm

SJ-WS350 - $10.95

BRICK LINE 100M – VARIOUS COLOURS 8 Strand Braided Brick Line Super Tough Nylon Construction Available in Light Green – Pink & Orange Colours

SJ-8/100M-LG - $8.95

SJ-8/100M-P - $8.95SJ-8/100M/O - $8.95

FLOOR SCRAPERS – ALL STEEL T BAR All Steel head and Handle T Bar Handle to Enable Added Force Fully Replaceable Carbon Steel Blades Head Stays for Added Strength

SJ-FS200 - $36.95SJ-FS300 - $44.95

37

38

5x Faster than manualLightweight & Compact

PJRC160 - Rebar Cutter

RB655 - Rebar Tier

RB517 - Rebar Tier

2,000 ties per charge

5x Faster than manual

Ties up to .8mm wire

Price in store

Up to 25mm x 29mm wireUses 1.5mm wire

Only 3.3s per cut (up to 19mm)360° Head RotationReversible Cutters

Advertorial


Bollé has developed a new anti-fog and anti-scratch lens coating, perfect for working in high humidity conditions

New platinum lens technology

For over 60 years, Bollé Safety Eyewear has dedicated themselves to fashioning the ultimate in protective

eyewear. Through forward thinking, superior product design and innovative technology they have created a diverse range of products that cater worldwide for all markets including manufacturing, mining, construction, public works, aeronautical, government and defence.

More importantly, they have developed safety eyewear people want to wear! Mostly this is the biggest hurdle for OH&S officers to overcome.

As a continuation of their innovation and desire to develop products for the broader market, Bollé Safety has launched new lens technology. Bollé Safety’s new platinum lens coating system is an exclusive anti-fog and anti-scratch coating which exceeds international standards for anti-fog and anti-scratch protection.

The platinum coating is ideal for working in high humidity environments, typically found in Australia. Heat and humidity can be a dangerous combination in the workplace. High humidity creates increased moisture and high heat increases worker

perspiration, combined this can lead to increased fogging to protective eyewear. Bollé Safety’s new platinum coating eliminates the risk of employees removing their eyewear to decrease fog.

This permanent coating is applied to both sides of the lens and offers a high resistance to scratching (1.4 cd/m²), to the most aggressive chemicals and delays the onset of fogging for two minutes, exceeding the EN166 K and N option* dramatically. It can be used for indoor and outdoor use and is offered on a variety of different lens options and frame styles, so you can match your protective eyewear to a specific application!

Platinum is now available on Bollé Safety’s new models Rush Plus, IRI-S, Hustler Seal as well as Sidewinder, guaranteeing greater safety, reliability and comfort. In all circumstances and at all times the platinum lens innovation guarantees your eyes improved protection.

All Bollé Safety eyewear is tested and approved to AS/NZS 1337.1.2010 for medium impact protection.

Bollé Safety – Innovative Vision. bollesafety.com.au

* The standard K (anti-scratch) requires a rate of <5 cd / m². The N (anti-fog) requires resistance to fogging for 8 seconds.

Bollé brands with platinum protection

RUSH PLUSn All polycarbonate frame with medical grade PVC nose bridge and co-moulded temple armsn Ultra-light weight – 27 gramsn Built in brow protectionn Adjustable PVC nose bridge plus co-moulded temple arms for superior comfort and grip

IRI-Sn High contour (10.5 base), single piece lens with 180 degree distortion free viewingn Tilt adjustable, co-moulded temple arms for customised secure fitn Highlight feature: Multi adjustable B-flex nose bridge allows height, tilt and width adjustability for a customised and comfortable fit

HUSTLER SEALn Black, high gloss, nylon frame with rubber nose pads and EVA temple tip inserts for improved grip and comfortn Exceptional visual clarity through an 8 base curve, distortion free lensn Fit: Medium/largen Highlight feature: Now featuring an EVA positive seal fixed gasket to maximise protection in dusty environments

SIDEWINDERn High gloss, dark gun metal dual material framen Polycarbonate frame front and new flat pad temple tips for improved comfort and fitn Rubber nose pads for superior comfort and non-slip fitn Half frame dual lens design providing extensive eye coveragen Exceptional visual clarity through an 8 base curve distortion free lens


Safety at work

Hundreds of construction workers are injured or

killed on work sites every year. It doesn’t have to

be this way if Australian safety standards

are upheld

As at 1 December 2014, 166 Australian workers had been killed while at work in the previous 12 months.

And tragically, the construction industry accounts for a significant percentage of those deaths. In fact, in the five years between 2007 and 2012, 211 construction workers died from work-related injuries. The total number of deaths equates to 4.34 fatalities per 100,000 workers, which is nearly twice the national rate of 2.29, safety has never been more important in this industry.

So you can understand the frustration of local businesses with products and services focused on workplace safety when they see work sites that put workers at risk. Workplace safety is a complex issue—too large to cover in detail in one article. But we can look at a couple of aspects of workplace safety that should be front of mind wherever you work.

Personal safetyThere is a wide range of Australian standards which can give manufacturers a goal to reach in terms of safety standards for equipment. However, if workers aren’t aware of the standards or are using experience rather than law to guide their choices, they’re going to potentially run into problems. Even for something as simple as appropriate workwear, tradition can work against you if you’re not aware of the products and materials out there that can keep you safe and save you money in the long term, explains Troy McNally of MAK Workwear.

“Take, for example, a customer who purchases a 100 per cent cotton shirt and pants and are using them for such trades as welding—where he’s obviously not wearing any protective coverage over his uniform and the actual arc flash off the welder fades the fabric and makes it really brittle,” he says. “The fabric recommended for that area should be a flame retardant fabric. But some guys, welders especially, constantly buy the 100 per cent cotton

Saving lives


for employees and others. So, even if there are no specific regulations on

ladders, the employer must take all reasonable steps to make sure that any risks associated with

working on ladders are eliminated or reduced as much as possible.

The general principles for working safely at height involve everyone on site. Being aware of hazards and prepared to address them has led to a noticeable reduction in accident statistics.

According to Gorilla Ladders, “the Australian Institute of Health and Welfare says almost 3500 people are injured every year due to ladder falls. Most injuries can be avoided by ensuring the ladder is safe. Ladders are tools: you should apply safety rules to them as you do for any other on site tools.”

Working at heightsAccording to Beaver Brands, when you’re using fall-arresting equipment, it is essential that there be adequate clearance under the area of work so that in the event of a fall, the user will not strike the ground or any other hazardous objects during the fall.

If it is assessed that the occurrence of a fall would endanger the user then other alternatives of fall protection systems must be considered. This may include the use of shorter shock absorbing lanyards, retracting lanyards or adjustable lanyards. In each case the fall clearance must be identified and the hazards associated with fall clearance eliminated.

The benefits of reducing free fall distances are multiple. If the free fall distance is reduced then the load on the system and the person are reduced, also the recovery method may be simplified.

Wherever possible the attachment point for a fall arrest system should be located above the attachment point on the users harness. When this is not possible the shock absorbing lanyard length must be reduced to ensure that the maximum fall distance of the user is limited to two

Saving livesclothing, and then wonder why there are holes and why it’s fading. In those circumstances the garment might only last a week, or not even that, depending on how they’re working.”

The importance of the correct material is more than just avoiding a few holes and colour fading. “Flame retardant and antistatic materials are used in the mining industry, for example,” McNally continues. “Antistatic is basically to prevent any friction or causing explosions where there’s potential gases in hazardous areas. Higher requirements, especially ARC-rated clothing, is also necessary on those sites. It does vary and once again it does come down to the task being performed by the actual wearer. Obviously throughout these industries, there are many different variations of tasks being performed.

According to McNally, clothing requirements do vary a fair bit between companies, the nature of the site and the task being performed, but “it does come down to the safety officer who’s in charge of that business to basically enforce what the guys are to be wearing based on overall Australian and New Zealand standards”.

Fire safetyAdherence to Australian Standards is a big issue around safety. The consensus appears to be that if people just pay attention to them, the majority of safety issues disappear. That appears to be the case with safety equipment such as fire equipment. Different work sites will require different extinguishers (and don’t forget, if you are a self-employed tradesman your car can count as a work site).

The basic standard is AS 1841 and all fire extinguishers that are sold in this country have to comply with that standard. At the end of the day, no fire extinguisher, whether it’s put into a domestic home or commercial application, is mounted and installed without it having complied to the appropriate Australian standard.

Gorilla Ladders common sense tips for ladder safety are:n Don’t use a ladder in high windsn Always maintain three points of

contact —never stand on the top platform without a harness

n Always wear clean, slip-resistant shoes

n Check your ladder rungs, treads and hinges before you use it

nUse the right ladder – never prop up or artificially extend a ladder

n Always make sure the ladder is on level ground

The Fire Protection Association of Australia has an excellent website at www.fpaa.com.au which offers technical advice, accreditation and licensing information and more (as well as details of ‘providers of choice’) to help with any fire safety questions you may have.

Ladder safetyBeyond meeting Australian standards and ensuring you’re using equipment correctly, the majority of safety is common sense. Where you don’t have specific safety rules to fall back on, all employers have a general duty of care under Section 21 of the OHS Act to provide and maintain a healthy and safe workplace, systems of work and plant

metres. A user should never climb above the attachment point using a fall arrest shock absorbing lanyard, as this only adds to the free fall distance.

On-site safetyEven though safety officers on large work sites are dedicated, sometimes they are not always across changes to Australian standards, says Grant Whitbourn from Pratt Safety, an independent Australian firm which has been supplying safety products for the last 40 years.

So in the case of, for example, portable eyewash stations—a vital safety feature for anyone working with chemicals on a work site—a standard eyewash facility could be a couple of plastic bottles attached to a wall. However Pratt Safety’s SE4050 Gravity Fed Portable Eye Wash unit provides 15 minutes of water flow, as specified in AS 4775 for emergency eye wash stations. “The other product may be cheaper, but if you’ve got a large chemical spill, your workers are going to need more than two squeezy bottles of water or saline solution to get the chemicals out of their eyes,” says Whitbourn.

42

Dangerous Goods Storage Cabinets

Spill Containment Gas Cylinder Storage Cages

Pratt Ad_Gas Cage.indd 1 12/12/2014 11:57 am

Pratt Safety Systems has been manufacturing and distributing cabinets throughout Australia and the Pacific region for over 30 years. Pratt Safety was the first company to introduce these cabinets into Australia.

All of our cabinets are designed and manufactured to comply with all of the relevant Australian Standards. Refer to the respective Standards for further specifications and conditions of use.

Wherever chemicals or hazardous substances are being stored, handled or transported, it is essential that all appropriate measures are in place for the containment of these chemicals/substances in the event of spill or leak. Pratt Safety Systems’ extensive product range and wealth of experience ensures that we are able to provide our customers with a range of containment solutions to meet any need.

Pratt Safety Systems offers a comprehensive range of Gas Cylinder Storage Cages to suit most storage requirements.

All Pratt Gas Cylinder Storage Cages comply with the requirements of Australian Standards AS 4332 and AS/NZS 1596. Refer to these standards for more specific storage requirements and compliance.

Dangerous Goods Storage Cabinets

Spill Containment Gas Cylinder Storage Cages

Pratt Ad_Gas Cage.indd 1 12/12/2014 11:57 am

Safety at work

“If there is a fire they are going to explode and could turn into a projectile.”Grant Whitbourn, Pratt Safety

The natural enemy of safety on a large work site, says Grant Whitbourn, is space and cost. “On construction sites, they need a certain amount of real estate to put their site office and materials,” he explains. “We have a range of dangerous goods storage cabinets which cover the flammable, corrosive range of products that get sold onto construction sites or industrial areas or universities, any sort of

major science projects like that. We also have a range of gas cages for storing of gas bottles on site, for forklift bottles or plumbers G-sized bottles, aerosol cages for storing of aerosols of any particular type whether they be cans or bottles. We also have a range of spill containment covering plastic portable bunding of 200-litre drums down to 20-litre drums, from one-drum tray to a four-drum spill pallet, through an IBC, through a 1000-litre IBC container as well. If people don’t use proper containment according to the standards, accidents can happen. Look at gas bottles for example, they’re stood up on walls behind a chain—if there is a fire they are going to explode and could turn into a projectile.”

Nowadays, says Troy McNally, there is more willingness on the part of companies to work with suppliers to make safe gear to order. “We work with safety officers to develop the products and ensure what we have developed for that company is correct and works well,” he explains. “So the big brands work with us and that is how we develop new ranges, based on what the market is demanding.”

Ambush Clear Foam Padded Safety Glasses

9070

AS/NZS1337.1:2010Lic.40028

• Closed cell foam gasket for a positive seal- improved protection against dust and particles• Certified to AS/NZS1337.1:2010 Lic 25512• Available in Clear (9070) and Smoke (9072) lens

AS/NZS1337.1:2010Lic.40028

Ambush Smoke Foam Padded Safety Glasses

9072

• Closed cell foam gasket for a positive seal- improved protection against dust and particles• Certified to AS/NZS1337.1:2010 Lic 25512• Available in Clear (9070) and Smoke (9072) lens

Cyclone Safety Goggle with Spherical Lens

6000 / 6002

• Durable PVC frame. • Soft foam lining for extend wearer comfort. • 35mm soft head strap to equalize strap pressure• Spring design on bottom of frame to accommodate wide varieties of facial shapes. • Low profile design fits under hard hats. • Spherical lens offers brilliant optical and peripheral vision. Chemical splash rated. Medium Impact rated. • Indirect ventilation to reduce fogging. • No side clips - less parts to break. • Increased eyeball to lens distance to reduce fogging.• Can be worn over prescription glasses.• Certified to AS/NZS1337.1:2010.• Available in Clear (6000) and Smoke (6002).

AS/NZS1337.1:2010Lic.25512

ProLite PU Dip Glove Hi Vis Yellow

PUNY

• Hi-Vis Polyurethane (PU) coated palm with anti-static liner • Lightweight and breathable Nylon liner • Excellent dexterity - bare hand technology • Colour coded cuff for size identification• EN388 3121 AS/NZS2161.3:2005• Product Code: PUNY(Size)

WHY WOULD YOU WANT YOUR WORKFORCE IN ANYTHING ELSE

Python® Slimline Neckband Earmuffs

EMPYTNB

• Class 4, SLC8023dB• Hi Vis for visual identification• Comfortable neckband configuration for extended wear • Hearing protection for noise levels to 108dB(A) • Robust steel wire construction for on site demands • Contemporary low profile design that withstands abuse without compromising comfort • Solid, lightweight ear cup construction • High quality ear cushions • Balanced clamping force for comfort

AS/NZS1270:2002Lic25293

Throttle Safety Glasses Hi Vis Orange

8082O / 8080O

• 99.9% UV Protection• High performance polycarbonate frame• Adjustable, anti-slip nose pad• Optically correct 8 base curve dual lens• Anti-fog/anti-scratch coatings on all lenses• Lightweight sport styling• Medium Impact rated• Certified to AS/NZS1337.1:2010• Available in Hi Vis Orange Frame Clear Lens (8080O); and Hi Vis Orange Frame Smoke Lens (8082O)• Also available in Black Sport Frame Clear Lens (8080) and Black Sport Frame Smoke Lens (8082)

AS/NZS1337.1:2010Lic.40028 Clear Smoke

Python® Slimline Earmuffs

EMPYTYS

• Class 5, SLC8031dB• Hi Vis for visual identification• High performance and strong durability through steel wire construction for maximum protection with easy adjustment system for individual fit • Hearing protection for noise levels to 116dB(A) • Contemporary low profile design that withstands abuse without compromising comfort • Solid, lightweight ear cup construction • High quality ear cushions • Padded foam headband • Robust wire construction• Low clamping force for comfort

AS/NZS 1270:2002Lic SMKH 25293

Bunting

BUN30

• Hi Vis fluoro PVC triangle flags• 30 metre length• Reusable hi strength nylon rope• 45 flags• Provided excellent visibility for hazard areas

Sunscreen 1L Bottle

SS1-50

• SPF 50+ with moisturising Vitamin E • 4 hours water resistant • Pump pack bottle

Safety Chain Yellow

PCY825

• 8mm UV stabilised• 25 metre roll• Provides excellent visibility for hazard areas

Clear Smoke

$12.00

$12.00 $16.00

$9.00

$25.00

$30.00

$30.00

$3.50

$15.00

$69.00

inc GSTinc GST inc GST

inc GSTinc GST

inc GST

inc GST

inc GST

inc GST

inc GST

43


Work Place Height Safety

FALL PROTECTION INTRODUCTIONRisk assessments should be conducted prior to any Work at Height, or Confined Space Work being carried out to identify hazards that exist and the risks they pose.

AS/NZS1891.4 contains a Hierarchy of Control which provides an ideal platform for development of risk assessments. Below find sample Risk Assessment Procedure for working at height.

Reference to local authorities is also recommended.

This table is a sample only as many other hazard factors can and will come into account. Other issues to be addressed at this stage include, but are not limited to: Nature of the work, surface materials, fragile roofing material, personal training levels, competency, weather conditions, surface conditions, etc. Reference should be made to AS/NZS1891.4 for the Correct Use, Selection and Maintenance criteria for Height Safety Systems. It is recommended that wherever possible a ‘Restraint technique’ system is used. This is a system where a person using fall arrest rated equipment, is prevented from reaching a position from where a fall is possible.

Fall Arrest – A fall or the arrest of a fall where the fall distance prior the fall arrest system taking any load exceeds 600mm either vertically or on a slope on which is not possible to walk without the assistance of a handrail or hand line. The maximum free fall distance permitted with an energy absorbing lanyard is 2m. (Refer note on fall clearances)

Work Place Height Safety—Why Risk It?

FALL ARREST ENERGY ABSORBING LANYARD

FC = FF + AB+ 1000FC = Foot ClearanceFF = Free Fall (Maximum allowed

2000mm) + 250mm for Harness Stretch and Slide.

AB = Shock Absorber Extension (As per AS/NZS1891.4) can be estimated using FF which reduces FC accordingly.

FF AB 600 mm 300 mm 1000 mm 500mm 1500 mm 600mm 2000 mm 900 mm1000mm standard safety clearance figure

INERTIA REEL

FC = FT + 1000FC = Foot ClearanceFT = Fall Total (Free Fall,

Activation and Decelaration to be 1.4m max) + 250mm Harness Stretch and Slide. AS/NZS1891.4 2009 advises that this can be estimated at 700mm + stretch and slide allowance of 250mm

1000mm standard safety clearance figure

CALCULATIONS FOR FALL AND CLEARANCE

WORKING AT HEIGHTSGeneral principles of Safely Working at Heights

Work sites today pose hazards that can cause serious harm. The responsibility to end each day safely is everyone’s responsibility, employers and employees. An awareness of the hazards at workplaces allows them to be safety addressed.

This principle has been used in many very high-risk occupations for some time, and the benefits have been rewarding with a noticeable reduction in accident statistics. A risk assessment—hazard reduction programme should be used by all working at height. Identification of the hazards is working safely - avoiding injury or death

WORKING AT HEIGHTSGeneral terminology used in Fall Prevention

Restraint Technique – To control a person’s movement by means of a combination of a harness and an energy absorbing lanyard that will physically prevent the person from reaching a position at which there is a risk of a free fall.

Restrained Fall – A fall, or the arrest of a fall, where the person suffering the fall is partially restrained by a restraining device such as a pole strap or is sliding down a slope on which it is normally possible to walk without the assistance of a handrail or hand line.

Limited Free Fall – A fall, or the arrest of a fall, where the free fall distance prior to the system taking the load does not exceed 600mm.

FALL ARREST CONSIDERATIONSWhen using fall arrest type equipment, it is essential that there be adequate clearance under the area of work so that in the event of a fall, the user will not strike the ground or any other hazardous objects during the fall.

If it is assessed that the occurrence of a fall would endanger the user then other alternatives of fall protection systems must be considered. This may include the use of shorter shock absorbing lanyards, retracting lanyards or adjustable lanyards. In each case the fall clearance must be identified and the hazards associated with fall clearance eliminated.

The benefits of reducing free fall distances are multiple. If the free fall distance is reduced then the load on the system and the person are reduced, also the recovery method may be simplified and time may be significantly reduced.

Wherever possible the attachment point for a fall arrest system should be located above the attachment point on the users harness. When this is not possible, the shock absorbing lanyard length must be reduced to ensure that the maximum fall distance of the user is limited to 2m (Consult AS/ NZS 1891.4cl 8.1). A user should never climb above the attachment point using a fall arrest shock absorbing lanyard as this only adds to the free fall distance which may take it over the permitted 2m.

Falling from a height

Slipping or tripping on roof surface

Elimination No Risk

ActionAssessHazard

Substitution

Fall Restraint Technique Limited Risk

Safe Work Systems

Recovery System

Isolation

Fall Arrest

Fall Protection

Consequences of a fall

Free fall > 600mm< 2000mm.

For more information, please ask your local distributor.


$59$75

SAFETY BOOTA re-usable, cost effective base for constructing

free-standing temporary guardrails.

• Complies with requirements of AS4994.1 & AS4994.3

• Easy set up and take down

• Can be used on most base materials

$35.00SAFETYBOOT

A simple solution for temporary hand rails


45

46

+

A NEW DIMENSION IN PRODUCTIVITYClass leading Performance: Combining a 1000W motor and a high Bpm optimised hammer mechanism with innovative safety features, the new 32mm hammer range from DEWALT® has set new standards in the 4kg class.

Power and Speed The new hammer mechanism delivers 4.2J impact energy

at an unrivalled speed of 0-4700 bpm.

Quick Change 3 jaw Chuck (QCC) provides speed, precision,

and flexibility when drilling in wood, ceramic, and steel.

3 mode versatility for hammer-drilling,

drill only, and chiselling.

Anti Rotational Technology protects the user by instantly

reducing power to the unit in a bind up situation.

Active Vibration Control with floating back handle delivers

extremely low vibration 8.2m/s².Increasing levels of user comfort

and giving longer trigger time.

Recessed mode selector for added

durability.

D25414KT-XE

DEWALT is constantly pushing the boundaries to create the most innovative tools for the construction professional. Power tools which carry the Perform & Protect shield have passed rigorous testing to ensure they exceed the highest demands of the toughest environments, while maintaining a fundamental emphasis on safety. All of these products have to meet strict criteria in one or more of the following core areas: Control; Vibration; Dust.

4KG MULTI DRILL

EX GST $590

$649RRP

D25414KT-XE Power 1000WImpact Energy 4.2J Weight 4.2kgVibration 8.2m/s2

Concrete Capacity 32mmBPM 0-4700bpmRPM 0-820rpmSize 250 mm x 370mmQuick Change Chuck ü

32MM HAMMER

BONUS 4” 800W Grinder valued at $89 DWE4001-XE

®

Special Package Deals on AC100PRO Adhesive AnchorFormerly Branded

• High Performance • Fast Cure• Styrene Free • Fire Rated• Low VOC Content• Green Star Compliant Office Design V2 IEQ-11 V3 IEQ-13 • V1.1 IEQ-11

BR 8-10MM-PWR

BLOW PUMP-PWR

AC100PRO-PWR

CG380KF2-PWR

BUY

10Get 2 Wire Brushes(1 x BR 8-10MM &1 x BR 10-14MM)at no cost(Via Redemption)

BUY

20Get 1 x Blow Pumpat no cost(Via Redemption)

BUY

30Get 1 x CG380KF2Injection Toolat no cost(Via Redemption)

Quick Curing: 20ºC 45 minutesM12 Fixture Thickness 110mmTension Uncracked Concrete C20/25, Steel 8.8

SUITABLE FOR BRICK,HOLLOW BRICK, BLOCK,CRACKED & UNCRACKED CONCRETE

ETA APPROVEDCE 0756

47

48

AQUA SHOT DIAMONDDRILL THROUGH THE HARDEST TILESThe in-built water tank removes the need for pressure bottles and hoses and the automatic water feed ensures optimum cutting performance and bit life. Interchangeable cutters result in a lower cost per hole than most other diamond solutions. Ideal for use in cordless drills.

Part # Description inc GST

2713-AS Aqua Shot Drill – Body $319.00

2713-SC4.0 Aqua Shot Drill – Shank and 4.0mm Cutter $109.00

ENGINEERING EXCELLENCE

TAKE THERAPIDCUTCHALLENGEAustralia’s fastest and longest life saw blade. We bet you can’t find

a higher quality product!

Part # Description inc GST7452-18424 184mm (7-1/4") 24T $24.957452-18440 184mm (7-1/4") 40T $29.957452-23540 235mm (9-1/4") 40T $49.957452-25440 254mm (10") 40T $59.95

TIMBER

ALL TYPES

1.6MM ULTRA THIN KERF

HIGH DURABILITY, FAST CUT

LOW DRAG NANO-SHIELD

PROTECTIVE COATING

ULTRA-K10 HIGH PERFORMANCE

DIAMOND GROUND CARBIDE

TEETH

24TUNGSTEN CARBIDE

DIAMETER

184MM 7-1/4"

BORE

20 & 16MM

TYPE

ALL PURPOSE

FOR USE IN

HAND HELD

CIRCULAR SAWS

rapidcut®

IDEAL FOR USE WITH TOPCON’S LS-B100 SERIESMACHINE-MOUNTED RECEIVERS FOR TOTAL JOB-SITE SOLUTIONS.

TOPCON RL-H4CStill Australia’s No.1 Construction Laser

Combining precision,versatility and value in one job site tough package.

The most popularconstruction laser on themarket.

GBH5-40D

New!!

230MM ANGLE GRINDER 5KG ROTARY HAMMER

BACK TO WORK 6PCTOWER OF POWER COMBO


GBH 5-40 DCE0611264040

- Unique Bosch patented Axial-Glide™ System allows for expanded cutting capacity and smooth precision cuts- No rails means working right up against walls- Upfront Bevel Lock eliminates reaching behind the saw- Bonus saw stand included

- Powerful 2400 W Champion motor and rotating bow handle- Vibration reduced by up to 50% thanks to Vibration Control main handle and auxiliary handle, for low-fatigue working- Armoured coils protect the motor against grinding dust- Kick Back Stop: detects when the disc is jammed and shuts down immediatel

GWS 24-230 LVI0601893H40

- Powerful 701W motor for enhanced performance- Rotatable brush plate for F/R operations- Sturdy metal grea housing for long lifetime- Auxiliary handle with axial and radial lock for enhanced control and safety

701W IMPACT DRILL,13MM KEYLESS CHUCKGSB 16 RE KLC

0601218141

- 125mm 850watt- Includes: 4 cutting discs, 4 grinding discs, safety glasses and gloves- In carry case

SET 125MM ANGLE GRINDER WITHBONUS DISC'S AND ACCESSORIES

GWS 850 C0601377761

305MM GLIDE SAW +BONUS T1B STAND

GCM 12 GDLF005XK0278

- GSB 18v Destroyer hammer drill with Safety clutch - GDR 18v Impact Driver 1/4" Hex 160Nm - 2 x 3.0Ah batteries - 30min fast charger in carry bag

18V DBX 2-MAX18 VOLT 2 PC KIT

0615990FV6

- Fastest drilling rate in its class due to 1150 W motor and powerful hammer mechanism- Vibration Control ensures convenient working, even in time-intensive applications- Patented, lock on switch for fatigue-free chiselling work- Constant-Electronic, service display and standby display for maximum convenience

0615990GT6

- GSB Destroyer hammer Drill with safety clutch - GDX Impact Wrench/Driver 2 in 1 tool - GML Soundbox radio - GWS18-125mm Angle Grinder

- GSB18V-EC (Brushless) 3 Mode SDS+ Rotary Hammer - GLI LED Vari Light - 2 x 5.0Ah Batts, Fast Charger in L-Boxx system

49

Advertorial


When it comes to synthetic slings, Beaver Brands leads the way in the areas of materials handling, lifting and load restraint, height safety and fall

prevention, and personal protective equipment

Kings of slings

Beaver Brands is one of the largest manufacturers and importers of synthetic slings

within Australia and New Zealand. With a team of industry experts in the field of manufacture, rigging, materials handling and engineering, Beaver is closely aligned with all industry groups in an advisory capacity with regard to workplace practice and inspection of slings.

Round and flat synthetic slings contain a variety of features to assist users in their operating environment with a view to enhancing workplace safety. They maintain different safety factors because round slings have load-bearing fibres protected by an outer cover, whereas flat slings’ outer fibres are the very construction that supports the load and are unprotected. That’s why the flat sling has an additional safety factor of 8:1.

Synthetic slings have a mandatory three-month inspection requirement as governed by the Australian Standards, this however still remains a confusing issue for users. Beaver recommends users familiarise themselves with the product standard and recognise that some companies and specific worksites employ more stringent inspection criteria. Looking into most accidents involving synthetic slings, it appears that it’s frequently the result of the sling being cut during the lifting operation due to sharp edges or the load shifting during the lift. Beaver recognises this and offers a range of additional protection options for the slings—both hard edge protection and an assortment of synthetic and PVC that can be retrofitted to the slings. Beaver’s Australian manufacturing capabilities means these can be tailor-made to suit any application. Beaver even produces a shackle protection pad for slings being

used through shackles. The underlying consideration for safe use of synthetic slings is always the contact point of the sling to the hook and to the apparatus been lifted. The rigger, dogman or competent person who is securing the load should always take time to ensure that the contact surface is as smooth as possible and whether required edge protection should be employed. That person should ensure all kinks and twists are removed from the slings to ensure the optimum performance for the lift.

Another commonly asked question is the use of synthetic slings in a chemical environment. This is always a very difficult question because there are hundreds of thousands of different chemicals and compositions. Most synthetic slings are made from polyester which offers good resistance to acid based chemicals, however alkaline solutions can be very damaging to polyester slings. One good option is to run a test of the solution with the sling in a controlled experiment, which could see the synthetic sling exposed to the chemical for a 24 hour period. The sling could then be washed and returned to the manufacturer for a load test and ultimate break test in a certified testing facility such as Beaver’s in Erskine Park, Sydney. This would allow the manufacturer to record the

degradation of the sling due to its exposure to the chemical. If there was no degradation in the performance of the sling, a determination for its use

could then be discussed. There would be the requirement

for increased inspection criteria to be undertaken

as the impact long-term on the sling would not yet been determined.The care and

maintenance through regular inspection for synthetic slings is important to prolong the life of the product. Synthetic slings can be washed with fresh water and should always be left to dry, ideally by hanging up, to allow the water to run off them and dry naturally. They should be stored in a well vented space. This regular maintenance of synthetic sling helps to identify any problem areas or situations requiring repair, and thus increasing service life and greatly improving safety in the work place.

In recent times Beaver, under licence to Slingmax in the USA, supports a very impressive range of products that incorporate some exotic fibres and blends to improve the strength, performance and characteristics of synthetic slings. These slings, called TwinPath, incorporate hi-cut resistant covers made from completely different material to the load bearing fibres inside. The use of exotic fibres has seen a great reduction in the tare weight of the synthetic slings. These slings are designed for the replacement of steel hardware rather than other synthetic slings. This is reflected in the price— the Twin Path is lifting expensive steel hardware. Whether it be bridge beams or heavy construction pieces, the items being lifted can run into millions of dollars. That is why the development of lifting equipment under the hook is foremost in design of Twin Path.

Learn more at www.beaver.com.au

http://www.beaver.com.au/

Code Description Price

MRS1000X1 1000kg x 1mtr Round Lifting Sling $5.00

MRS1000X2 1000kg x 2 mtr Round Lifting Sling $10.00





MRS3000X1 3000kg x 1mtr Round Lifting Sling $9.50



MEGA ROUND LIFTING SLINGS

■ Complies to AS1418.2■ Colour coded to match international lifting standards■ Load chain is made of high resistance Grade 80 Alloy Steel■ Top and bottom hooks come with cast/heavy duty latches■ Top and bottom hooks fitted with ball bearings to allow

rotation under loadCode: 500103M (VIOLET 1000kg x 3m)

3G INDUSTRIAL CHAIN BLOCKS

$139.001T - VIOLET

EYE SAFETY GLASSES■ Medium impact ■ Anti-Scratch lens■ 99.9% UV protection for outdoor wear■ Complies to AS/NZ 1337.1:2010■ Available in both Clear and Smoke lensCode: FE001 (Clear Lens)

FE002 (Smoke Lens)

$2.50FE001 & FE002

CLEARVIEW HARD HAT - ALL COLOURS■ Complies to AS/NZS 1801■ UV400 stabilized & is suitable for indoor/outdoor use■ Allows 25 & 30mm attachments e.g. Earmuffs & Visors

CV63-CL (Clear) CV63-RD (Red)

CV63-GR (Green) CV63-SM (Smoke)

CV63-OR (Orange) CV63-YE (Yellow)

CV63-BL (Blue)

$15.50GREAT VALUE!

PRO5 EARMUFFSCLASS 5/ SLC80 30DB■ High quality robust hearing

protection - high noise use■ Hi Vis colour for increased visibility■ Padded headband for comfort■ Stainless steel wire headband construction for durabilityCode: H500

$19.50GREAT VALUE!

AUSCARE SUNSCREEN 1LTR PUMP PACK 50+■ Broad spectrum UVA & UVB

sunscreen■ 4 hours water resistance■ Contains Aloe Vera & Vitamin E■ Suitable for people involved in all

types of outdoor activitiesCode: AUSUN501P

$29.00HIGH PROTECTION

FULL BODY HARNESS■ Lightweight and comfortable■ Rear attachment point■ Front attachment points■ Full adjustable leg, should and chest straps

Code: BHO1120

$99.00GREAT VALUE

■ AS/NZS 1337.1:2010 Standards Approved■ Anti-scratch lens reduces marking & dirt build up■ UV400 filter for 100% UV protection outdoors■ Polarised LensCode: ME503 (B-DOUBLE, Black Frame)

ME504 (LONGHAUL, Brown Frame)

SAFETY SPECS

$25.00POLARISED LENS


51

52

BONUS! ALPHA CAP WHEN YOU BUY 2 PACKS OF DOUBLE

ENDED DRILLS (20 DRILLS)

• 135˚ split point cuts faster and reduces wandering• Titanium Nitride coating reduces heat and increases

lubricity for extended life• Fully ground M2 HSS increases drill life

• 15 Piece Drill Set• Quality Alpha 135° Split

Point drill bits• Quick Release hex

shank• Sizes 1.5, 2.0, 2.5, 3.0,

3.3, 3.5, 4.0, 4.2, 4.5, 5.0, 5.5, 6.0, 6.5mm

• Includes Quick Release Bit Holder and PH2 Insert bit

Code: 9D30No. 30

Code: 9D20No. 20

Code: 9D11No. 11

Code: 9QRM-SET15$2500

*

*THAN OTHER LEADING BRANDS OF JOBBER DRILLS.

20XLIFE

• Fast and clean cutting, suitable for drilling sheet metal, steel pipe, stainless steel, aluminium and fibreglass reinforced synthetic materials

• 2mm cutting depth in stainless steel, 6mm cutting depth in mild steel, fibreglass etc

• Premium quality TCT teeth, accurate and clean holes• Replaceable pilot drill• Fits standard chucks, complete with Arbor

HSS HOLECUTTERS

DOUBLE ENDED

DRILL BITSHEX SHANK 15

PIECE SETPERFECT FOR IMPACT DRIVERS

CODE SIZE PRICEHCS15 15mm $12.50HCS16 16mm $12.50HCS18 18mm $12.85HCS19 19mm $13.50HCS20 20mm $15.50HCS22 22mm $16.50HCS25 25mm $18.00HCS28 28mm $18.50

CODE SIZE PRICEHCS30 30mm $19.00HCS32 32mm $19.00HCS35 35mm $20.00HCS38 38mm $23.00HCS40 40mm $24.00HCS50 50mm $32.50HCS60 60mm $28.00HCS63 63mm $40.00

CODE SIZE PRICEHCS65 65mm $42.50HCS76 76mm $105.00HCS87 87mm $120.00HCS92 92mm $129.00

HCS102 102mm $140.00HCSS16-50 8 pce Kit

16 - 50mm$145.00

CODE SIZE PRICEHCSTCT16 16mm $25.00HCSTCT18 18mm $29.00HCSTCT19 19mm $30.00HCSTCT20 20mm $32.50HCSTCT22 22mm $35.50HCSTCT25 25mm $40.00HCSTCT26 26mm $42.50

CODE SIZE PRICEHCSTCT28 28mm $45.00HCSTCT30 30mm $50.00HCSTCT32 32mm $52.00HCSTCT35 35mm $59.00HCSTCT38 38mm $60.00HCSTCT40 40mm $65.00HCSTCT45 45mm $75.00

CODE SIZE PRICEHCSTCT50 50mm $88.00HCSTCT60 60mm $105.00HCSTCT65 65mm $115.00

HCSTCTS16-40 8 pce Kit 16 - 40mm

$259.00

• 2mm cutting depth, accurate, fast and clean holes• Replaceable pilot drill, fits standard chucks, complete with

Arbor• Lasts 10 x longer than standard Bi-Metal holesaw when

cutting sheet metal

• Fast and clean cutting, suitable for drilling sheet metal, steel pipe, stainless steel, aluminium and fibreglass reinforced synthetic materials

TCT HOLECUTTERS

THIN SHEET HOLECUTTING

SOLUTIONS

10XLIFE

In Store Pricing


53

BRING IN A

®

54

S2 Drill Set 21 Pieces1/16 – 3/8 × 64thsItem #: D102 S2

SM2 Drill Set 19 Pieces1.0 – 10.0mm × 0.5Item #: D102 SM2

SM3 Drill Set25 Pieces1.0 – 13.0mm × 0.5Item #: D102 SM3

S3 Drill Set29 Pieces1/16 – 1/2 × 64thsItem #: D102 S3

150B

0WS3

M

Item #: D514 0005Item #: D514 0003

HSS & HSS Cobalt Drill Sets

• TiNite coated tip for 3 x longer life• 135° Split point• Drill depth indicator• Parabolic flute design for increased

chip evacuation

Masonry Drill Bit Set6 Pieces4.0, 5.0, 5.5, 6.5, 8.0, 10.0mmItem #: D600 SMD2

Spade Bit Drill SetVinyl Wallet6 Pieces10, 12, 16, 19, 22, 25mmItem #: D501 SS6W

Auger Bits3 Pieces16, 19, 25mmItem #: D514 0003

5 Pieces16, 19, 22, 25, 32mmItem #: D514 0005

Masonry SDS Sets

Item #: D623 0004Item #: D613 0004

Booster Multi-fit4 PiecesDrills through reinforced concrete mesh6, 8, 10, 12mm × 160mmItem #: D623 0004

Twister Multi-fit4 Pieces

30% faster than conventional SDS drills6, 8, 10, 12mm × 160mm Item #: D613 0004

$69.00inc GST

$68.00inc GST

$133.00inc GST

$145.00inc GST

$18.00inc GST

$30.00inc GST

$24.00inc GST

$45.00inc GST

$32.00inc GST

$49.00inc GST

Description Drill Size Case No. of Drills Item # Price

Inc. GST

Workshop (HSS)WS2M 1.0 – 10.0 x 0.5mm rises Plastic 19 150B0WS2M $51.00WS3M 1.0 – 13.0 x 0.5mm rises Plastic 25 150B0WS3M $99.00Workshop Pro (HSS Co)WC2M 1.0 – 10.0 x 0.5mm rises Plastic 19 150B0WC2M $78.00WC3M 1.0 – 13.0 x 0.5mm rises Plastic 25 150B0WC3M $156.00

Carpenter Holesaw SetHolesaws: 32, 38, 51, 54, 76, 92, 102mmItem #: H111 009C

Plumber Holesaw SetHolesaws: 44, 51, 57, 70, 86, 111mmItem #: H111 008P

Electrician Holesaw SetHolesaws: 16, 20, 25, 32, 40, 51, 64mmItem #: H111 009E

Downlight Holesaw SetHolesaws: 41, 54, 57, 64, 70, 92mmItem #: H111 008DL

Electrician SetHolesaws: 16, 20, 25, 32, 40, 51mmItem #: H114 S9

8pce Diamond Grit SetHolesaws: 19, 22, 25, 29, 35, 38, 44, 51mmArbors: DA01, DA02Holesaw Guide: DG70Item #: H115 0011

Electrician Set #9Holesaws: 16, 20, 25, 32, 40, 51mmItem #: H105 S9

Multi-purpose TCT Holesaws

Heavy Duty Cobalt HolesawsHSS Bi-Metal Holesaws Diamond Grit Holesaws

Maintenance SetHolesaws: 19, 22, 25, 32, 35, 38, 44, 51, 57, 63, 76mmItem #: H114 S14

5pce Diamond Grit SetHolesaws: 19, 25, 32, 38, 51mmArbors: DA01, DA02Item #: H115 0007

5X FASTER IN TIMBER

General Engineering #14Holesaws: 19, 22, 25, 32, 35, 38, 44, 51, 57, 63, 76mmItem #: H105 S14

BETTER

$145.00inc GST

$162.00inc GST

$170.00inc GST

$154.00inc GST

$100.00inc GST

$223.00inc GST

$173.00inc GST

$190.00inc GST

$130.00inc GST

$278.00inc GST

55

56

EVOLVE WORKSHOP 260 PIECE 13 DRAWER• Imperial & Metric • 5 EVA Trays• Tool Chest: 666 x 410 x 475mm • Tool Trolley: 672 x 466 x 963mm • Part No. K1601B

LED LI-ION Work Light• Heavy Duty • Waterproof to IP68 • Charging Dock Included• 4w COB (Circuit On Board) LED

Technology • 200 Lumens • Shockproof and impact resistant • Magnetic • Part No K10200

LED LI-ION Work Light HI-VIS• 3W LED Torch• 10 SMD LED up to 400 Lumens

& 120o Light Spread• Rechargable LI-ION Battery• Part No K10202

Platform Trolley 150Kg• Black PVC Non Slip Deck Face• Wheel Diameter: 100mm• Folding handle for easy storage• Part No K12115

Hydraulic Lift Table 300Kg• Sealed bearing wheels • Table size: 610mm x 820mm • Positive braking system on rear • Overload valve • Height Lowered: 200mm• Height raised: 980mm• Part No K12300

Loosens up to 85% rounded fasteners

LOK-ON Socket Set 40 Piece• 18 Metric: 8 - 32mm • 15 Imperial: 3/8 -1.1/4” • 7 Accessories• Part No K2042

Socket Set 194 Piece • 12 Metric 1/4” • 10 Imperial 1/4” • 10 Metric 3/8” • 8 Imperial 3/8”• 19 Metric 1/2” • 13 Imperial 1/2”• 1/4”, 3/8", 1/2" Dve Accessories • Part No K2164

METRICIMPERIAL

Compact Series Folding Bolt Cutters• Innovative Folding mechanism• Hi Leverage Hardened Cr-Mo

Steel Jaws• Extra Wide Rubber Handles • Cuts high tensile material• Compact Design for easy storage • 18" 450mm Part No K6618 $59.95• 24" 600mm Part No K6624 $79.95• 36" 900mm Part No K6636 $199.00

Weather Shield Back Pack • Heavy Duty weather resistant rubber base • Overlapped main lid with weather reisistant zippers• Water Resistant tough polyester material• High visibility Reflective pockets strips• Part No K7460

Club Hammers• Fiberglass handle with graphite core,

for greater strength and durability • 260mm in length Part No K9063 $21.95• 400mm in length Part No K9064 $27.95

Tool Kit 174 Piece• Imperial & Metric • Spanners • Sockets • Screwdrivers • Hex Key Set • Pliers • Hammer & Much More...• Measurements: 460 x 200 x 230mm• Part No S1174

$189900

$14900 $5995$9900

$7900

$19900

$6995

$24900 $29900

$49900

$8900

$2195

IncludingBonus Item K3102

2EVARAYS

EVA1 RAY 3EVARAYS

4EVARAYS 5EVA

RAYS 6EVARAYS

7EVARAYS 8EVA

RAYS

11 EVARAYS 12EVA

RAYS

9EVARAYS

EVARAYS

METRICIMPERIAL

From

From

Wet & Dry Garage Vac 20 Litre • 1250 Watt Motor • 2 Stage Filtration • Stainless Steel Tank • Blower Function• On Board Accessory Storage• Part No KP702

ALL PRICES INCLUDE GST

Single Way Gear Spanner Set 12 Piece Metric• Metric: 8-19mm• Part No K3102

BONUS

VALUEDAT $159

FatMag Fun

© L

ovat

ts P

uzzl

es

Brought to you by

ACROSS1. Sang in unison5. Tiny amount7. Small island8. Faintest9. Camera glasses12. Jury finding15. Most pious19. Annul21. Kept steady22. Freezes, ... over23. Ore seam24. Esteems

DOWN1. Cools2. Smells strongly3. Open wounds4. Injure5. Mean6. Painter10. Not binding11. Otherwise, or ...12. Critically examine13. Talk excitedly14. Novel thought15. Of medicinal plants16. Inherited17. UFO, flying ...18. Tightens (muscles)19. Plant stem lumps20. False appearance

3 LETTERSBraIreRanSir

5 LETTERSAbaseApart

AriseEvensHingeKarmaLochsMeleeOccurOrderPawed

PianoRaiseResetRestsRipenSconeSenseTailsWorst

6 LETTERSAbbessAchingBasinsBassetCaviarChordsDenserDonateDriverEsteemLassosNarrowOrbitsPhraseSkaterSneersStreetSurgesThriveWiping

Place all the words listed into the grid. Each word can be used once only. The first word has been filled in.

PuzzleExperts FILL IN

CrosswordSolutions on page 62


58

FulaFlex 550LM

Firesound Floor Bond XMS

PUSealant

Fire RatedSealant

Flooring

FulaFlex 550 PU LM is a one-component moisture-curing low modulus polyurethane sealant. It cures into a flexible, durable and weather resistant sealant and exhibits excellent adhesion to a wide range of substrates.

Uses

UsesUses

Key Benefits

Key BenefitsKey Benefits

Firesound™ is formulated primarily to perform as a barrier

to the incursion of fire through expansion joints and wall

penetrations such as pipes or cables. Firesound™ is also an

effective acoustic sealant.

Floor Bond XMS™ is a high strength, high performance,

MS polymer flooring adhesive. Ready to use with no

mixing required, extremely smooth and easy to trowel.

As Floor Bond XMS™ contains no water or solvents,

the risk of deforming timber flooring is eliminated.

Non toxic/isocyanate free

No black hands after use

Forms stable peaks once applied with a notched trowel

Contains no water, solvents or isocyanates

Acoustic rated, CSIRO - Report No. INR 157

Floor Bond XMS™ 16kg is reusable for up to 6 weeks if lid has been correctly fitted

Elastomeric: permanently flexible

Sealing exterior and interior construction joints that are subject to movement (up to +/- 20%) in pre-cast concrete panels, block work and brickwork

Gaps around cables, metal pipes, conduits, busways and ducts that penetrate walls, floors and ceilings

Fire rating for gaps up to 50mm

Up to 4 hour fire rating (AS1530.4-2005)

Excellent acoustic properties (STC 65)

Good flexibility; +/- 20% joint movement capability

Paintable

Intumescent; expands when exposed to fire or extreme heat.

Bonding many types of timber flooring

Suitable for floors with under floor heating

To use in areas where movement and noise need to be absorbed

Easy application, simple clean up - minimal mess

Low modulus

Excellent adhesion to many surfaces & excellent UV resistance

Low VOC - 27 g/L

Excellent flexibility

Non Hazardous

Expansion joints

Connection joints between windows, doorframes and walls

Joints with large movement

Joints in precast/tilt up concrete elements

59

Be performance drivenwith Simpson Strong-Tie®

Take advantage of these great offers

PRO250 System for Deck, Dock and Subfloor Applications (screw gun not included)

Collated Screws for the Quik Drive® System

$429*

*All prices include GST

AUTO-FEED SCREW DRIVING SYSTEMSQuikDrive ®

Deck-Drive ™ DCSD COMPOSITE-TO-STEEL Screw#10 x 63mm (All types of composite decking to steel) 1,000/bx, Quik Guard® in 4 colours, #2 undersized sq. dr.

$165*

Deck-Drive ™ DHPD HARDWOOD Screw#10 x 63mm (Softwood joist) 1,000/bx,Class 3 gal., #2 undersized sq. drive

$165*

$451*

Deck-Drive ™ BFHSD BI-METAL Screw#10 x 50mm (Steel joist) 1,000/bx,316 stainless steel, #2 square drive

TIME SAVINGBY DESIGN

FIELD-PROVENSOLUTIONS

Anchoring Adhesive

Anti-corrosive steel coating

Comfortable handle

Perfectly adapted pressure power

Reinforced cradle for optimal cartridge positioning

High quality, heavy-gauge steel rod and plunger

BONUS Deck Clips RRP $75.00 FREE

AT-HP380-UK • Fast curing • Low odour • Non-flammable • Can be used in damp holes

• Each cartridge is supplied with 2 mixing nozzles

• Also available in 280ml and 825ml

• ETA approved for threaded rod (option 8) and rebar.

FREE dispensing tool (RRP $49) and work gloves with every 12 tubes purchased!

$22*pertube

Look for the yellow strip to ensure you’re

getting high-quality Quik Drive® fasteners.

60

NEWRANGE

Metal Protection RangeFeatures & Benefits

• Quick dry

• Long lasting metal protection

• Excellent adhesion properties

• Ideal for industrial applications

• Provides a tough and durable finish to metal surfaces

Colour & Description Qty Ref. Code Price

Zinc Guard™ Etch Primer 325g 230732001 $8.95*

Zinc Guard™ Red Primer 350g 230732002 $8.95*

Zinc Guard™ White Primer 350g 230732003 $8.95*

Zinc Guard™ Grey Primer 350g 230732004 $8.95*

Zinc Guard™ Rust Reformer 350g 230732005 $9.50*

Zinc Guard™ Cold Galvanising Coating 400g 230732006 $11.95*

Zinc Guard™ Silver Bright 350g 230732007 $10.95*

Zinc Guard™ Silver Zinc 400g 230732008 $8.95*

Features & Benefits

• Specially formulated for the professional

• Lubricants and cleaners designed for industrial use

• High performance results

Colour & Description Qty Ref. Code Price

Protech Dry Graphite Lubricant 150g 42031502 $11.95*

Protech Air Duster 235g 42032301 $13.95*

Protech White Lithium Grease 300g 42033001 $8.95*

Protech Wet PTFE Lubricant 300g 42033002 $12.50*

Protech Freeze Spray 300g 42033004 $12.50*

Protech Contact Cleaner Flammable 350g 42033502 $13.95*

Protech Penetrating Oil 400g 42034001 $17.95*

Protech Contact Cleaner Non-Flammable 400g 42034004 $23.95*

Protech Dry PTFE Lubricant 150g 42031501 $12.95*

Protech Silicone Lubricant 350g 42033501 $7.95*

Protech Multi-Purpose Lubricant 400g 42034002 $6.95*

Protech Heavy Duty Degreaser 400g 42034003 $5.95*

Protech Brake & Parts Cleaner Chlorinated 500g 42035001 $7.95*

Protech Brake & Parts Cleaner Non Chlorinated 500g 42035002 $7.95*

Protech Chain Lubricant 300g 42033003 $11.95*

™

*Prices GST inclusive

61

TRB4000 AIRCO BATTERY OPERATED REBAR TYING TOOL 14.4V LI-ION• 160 ties per spool (2 turns)• Over 3,400 ties per charge (2 turns)• 100m wire spool capacity• 0.8mm to 40mm wire size

TBD0001 AIRCO DE-NAILER• Trigger Lock• Can be adjusted for smooth edge application• Remove nails from timber

to allow for timber recycling• Can be used as a nail punch• Driving the nails in prenail

“smooth edge” tack strip• Denailing timber products

for recycling purposes

TTD1564AIRCO DA SERIES BRADDER• 25 – 64mm Range• Load Capacity of 100 brads• Angled Magazine for

manoeuvrability and restricted area access

• High fastener driving power

COLT265 TWIN TANK CARRY 16L AIR COMPRESSOR• 2HP/1.5KW• 7.6CFM or 217 L/min• Pressure up to 145psi• Direct Drive• Nitto equivalent

couplings

TBR2000 AIRCO BATTERY OPERATED RIVET GUN 14.4V LI-ION• 700 rivet capacity (low setting)• 2.4mm to 4.8mm rivet size• Lightweight & high strength joining• 12 month warranty

TTT2264 AIRCO T NAILER/ ND BRADDER• 30 – 64mm ND Range• 18 – 64mm T & Finish Nail Range• Load capacity of 125 fasteners• Drives brads and nails

(ND Brads, T & Finish Nails)

TTSFSTAIRCO SECRET FLOORING STAPLER• 38 – 50mm Range• Load capacity of 120 fasteners• Automatically drives staples

at a 45º angle• Adjusts to varying

thicknesses of flooring

COLT282 50L AIR COMPRESSOR• 2.5HP/1.8KW• 9CFM or 255 L/min• Pressure up to 145psi• Direct Drive• Nitto equivalent

couplings

Note: All prices include GST

$1,99900INC GST $59900

INC GST

$19900INC GST $39900

INC GST

$32900INC GST $39900

INC GST

$36900INC GST $54900

INC GST

FatMag Fun Solutions

Solutions to the puzzles on pages 57


Brought to you by

O30010NEL SERIES GEAR OIL DRUM PUMP

• Smooth pump action delivers 80 ml on the downstroke

• Drain back nozzle holster• For use with 20L drums• Long life hose & non-drip nozzle

*Applies to the vast majority of Alemlube products

KEEP YOUR BUSINESS PUMPING WITH992820L GEAR OIL DRUM PUMP

• Ideal for topping up engines, gear boxes, transmissions and differentials

• Spring operated• Semi automatic operation delivers

330mL per stroke9978 Also vailable to suit 60L drum $152.00

10028HEAVY DUTY 20L GEAR OIL DRUM PUMP

• Heavy duty fully serviceable drum pump delivers 170mL on the downstroke

• Non-drip nozzle and drain back nozzle holster ensure a clean, safe workshop

• Ideal for the transfer & top ups of engine, hydraulic, gear, diff and synthetic oils.

507222COVERED OIL REEL

• Robust construction with corrosion resistant aluminium covers

• 300 psi (20bar) hose pressure rating• 1/2" BSP (m) inlet & outlet connections• Supplied complete with 15m x 12mm

ID hose

334900240V OIL TRANSFER PUMP

• Suitable for the transfer of engine, gear, diff and hydraulic oils up to 500cSt

• Flow rates up to 25 L/min• 3/4" BSP(f) inlet and outlet• Continuously rated with pressures

up to 85psi (6bar)

365534ELECTRONIC OIL METER

• Electronically meters and totalises the amount of lubricant dispensed.

• Maximum flow rate of 30 L/min• Maximum operating pressure of

1,450psi (100bar)

$40.00

$969.00

$160.00

$1,139.00

$885.00

$118.00

$1,520.00

454600NSTATIONARY OIL PUMP, REEL & METER KIT

• Includes a 3:1 ratio drum pump, 10m hose reel, electronic meter and a 2m pump to hose reel connection hose

• Adjustable flow rates of up to 10 L/min• 3:1 ratio pump suits 205L drums• Suits 60L or 205L drums

454110NOIL TRANSFER KIT WITH METER

• 3:1 ratio pump, 3m x 1/2" ID hydraulic hose and electronic resettable meter

• Transfer rates of up to 12 L/min• Suitable for engine, gear, diff

and hydraulic oils• Suits 60L or 205L drums

$2770.00

62

63Made in

Japan

MODEL SIZE $ EX GST $ INC GST

20SM 1/4” $9.09 $10.0030SM 3/8” $10.00 $11.0040SM 1/2” $10.91 $12.00


20PF 1/4” $3.64 $4.0030PF 3/8” $4.55 $5.0040PF 1/2” $7.27 $8.00


20PM 1/4” $3.64 $4.0030PM 3/8” $4.55 $5.0040PM 1/2” $5.45 $6.00


20SF 1/4” $9.09 $10.0030SF 3/8” $10.00 $11.0040SF 1/2” $12.73 $14.00


20SH 1/4” $9.09 $10.0030SH 3/8” $10.00 $11.0040SH 1/2” $10.91 $12.00

For FEMALE Thread Connection (PM)

For FEMALE Thread Connection (SM)

For MALE Thread Connection (PF)

For MALE Thread Connection (SF)

For HOSE Connection (PH)

For HOSE Connection (SH)

▪ Lightweight,non-conductive,non-markingadvancedhose▪ UVStabilised,temperaturerange-23oCto+70oC▪ BendRadius100mm(3/8”and1/2”)▪ Reinforcement:SpiralSyntheticYarn▪ ExceedsAS2554:1998ClassB▪ FittedwithGenuineNitto200Series‘OneTouch’Cuplas

Cuplas

madeinJapan

Hose

madeinUSA

• Oilresistant,excellentmemory,storesneatly.• Smallcoildiameterstopstanglingwhilestraightendsectionseliminates

hosesplitting.• HosesizesdesignedforusewithNittotypenutcouplingandfittings,

thereforehoseclampsarenotused,eliminatingairleakage.• FittedwithGenuineNitto200Series‘OneTouch’NutCuplas.CombinationsalsoavailablewithPlasticorThreadedFittings.

•MODEL

WORKING LENGTH

(M)SIZE (MM)

NUT CUPLA$ EX GST

NUT CUPLA$ INC GST

HA0803 COMB.B 2 8x5 $40.91 $45.00HA0805 COMB.B 4 8x5 $45.45 $50.00HA0808 COMB.B 6 8x5 $54.55 $60.00HA0810 COMB.B 8 8x5 $59.09 $65.00HA1003 COMB.B 2 10x6.5 $44.55 $49.00HA1005 COMB.B 4 10x6.5 $53.64 $59.00HA1008 COMB.B 6 10x6.5 $63.64 $70.00HA1010 COMB.B 8 10x6.5 $72.73 $80.00HA1203 COMB.B 2 12x8 $53.64 $59.00HA1205 COMB.B 4 12x8 $59.09 $65.00HA1208 COMB.B 6 12x8 $77.27 $85.00HA1210 COMB.B 8 12x8 $86.36 $95.00

Cuplas

madeinJapan

Hose

madeinUSA

Genuine

RL-20PM PV-30PHPV-65PNRL-20PFF


L-20SM 1/4” $25.45 $28.00L-30SM 3/8” $25.45 $28.00L-40SM 1/2” $26.36 $29.00


RL-20PM 1/4” Male $20.00 $22.00RL-30PM 3/8” Male $20.00 $22.00RL-20PFF 1/4” $20.00 $22.00

Parallel Thread


L-20SH 1/4” $25.45 $28.00L-30SH 3/8” $25.45 $28.00L-40SH 1/2” $26.36 $29.00


L-20SF 1/4” $25.45 $28.00L-30SF 3/8” $25.45 $28.00L-40SF 1/2” $27.27 $30.00


PV-20PH 1/4” $22.73 $25.00PV-30PH 3/8” $22.73 $25.00PV-40PH 1/2” $22.73 $25.00PV-65PN 6.5x10mm $22.73 $25.00PV-85PN 8.5x12.5mm $22.73 $25.00

For FEMALE Thread Connection (SM)

For MALE Thread Connection (SF) For HOSE Connection (SH)


20PH 1/4” $3.64 $4.0030PH 3/8” $4.55 $5.0040PH 1/2” $5.45 $6.00

STANDARD HI-CUPLAS

LOCK HI-CUPLAS

PURGE PLUGSROTARY PLUGS

POLYURETHANE COILED HOSE CRIMPED PVC HOSE

NITTO 200 SERIES “ONE-TOUCH” 3 /8” F ITTINGS MODEL SIZE LENGTH $ EX GST $ INC GSTHA200-30SHP10GS 9.5mm 10m $36.36 $40.00HA200-30SHP20GS 9.5mm 20m $54.55 $60.00HA200-30SHP30GS 9.5mm 30m $72.73 $80.00

N ITTO 200 SERIES “ONE-TOUCH” 1 /2” F ITTINGSHA200-40SHP10GS 12.7mm 10m $54.55 $60.00HA200-40SHP20GS 12.7mm 20m $77.27 $85.00HA200-40SHP30GS 12.7mm 30m $113.64 $125.00

Hi Cupla

200 SeriesCupla

Plastic Cupla

Rotary Plug

PVRCupla

FullBlowCupla

Lock Cupla

64

Trade OnlyTrade Only

One day only

12.30pm - 6pmOne day only

12.30pm - 6pm

Door prizes & give aways


Free Ticketed Entry

Free Ticketed Entry

Register Online www.ctme.com.au

Register Online www.ctme.com.au

The Construction Supply Specialists Group in conjunction with their 8 Western Australian member branches, are holding a must see tradeshow called Construction Trades and Mining Exhibition (CTME).With over 70 national leading brand suppliers to the industry, exhibiting and demonstrating a wide range of Construction, Industrial and Mining related products and services, CTME will be a must visit for anyone working in or associated with the Construction, Civil, Building, Industrial and Mining market segments.

Register now at ctme.com.au for your free entry ticket

CONSTRUCTION SUPPLY SPECIALISTS present:

when:

One day only - 12.30pm - 6pM Wednesday MARCH 19, 2014

REGISTER NOWREGISTER NOW


One day only

12.30pm - 5.30pmOne day only

12.30pm - 5.30pm



Free Ticketed Entry

Free Ticketed Entry

70 suppliers participating




when:

One day only - 12.30pm - 5.30pM THURsday MARCH 26, 2015


The Construction Supply Specialists Group in conjunction with their 10 Victorian member branches, are holding a must see tradeshow called Construction Trades and Mining Exhibition (CTME). With over 70

national leading brand suppliers to the industry, exhibiting and demonstrating a wide range of

Construction, Industrial and Mining related products and services, CTME will be a must visit for anyone

working in or associated with the Construction, Civil,Building, Industrial and Mining market segments.

Geelong Arena 110 Victoria st North Geelong 3215


One day only


12.30pm - 5.30pm



Free Ticketed Entry

Free Ticketed Entry





when:









One day only


12.30pm - 5.30pm



Free Ticketed Entry

Free Ticketed Entry





when:









One day only


12.30pm - 5.30pm



Free Ticketed Entry

Free Ticketed Entry





when:









One day only


12.30pm - 5.30pm



Free Ticketed Entry

Free Ticketed Entry





when:









One day only


12.30pm - 5.30pm



Free Ticketed Entry

Free Ticketed Entry





when:








Documents

CSS Fat Mag Feb 2015