2
Laptop tray If you use your laptop while on a sofa or in bed, a comfortable and practical laptop tray is a must. And you don’t have to buy it: some fabric, a picture frame, some foam and a few tools and supplies is all you need to create one of a kind. See video • Printed fabric 40 cm (16 in.) • Picture frame with glass 33 x 40.5 cm (13 x 16 in.) • Fabric shears • Upholstery foam 38 x 43 x 7.5 cm (15 x 17 x 3 in.) • Utility knife • Ruler • Cutting mat • Permanent marker • Plain fabric 60 cm (24 in.) • Sewing pins • Fusible hem tape • Iron • 4 pieces of 40 cm (approx. 16 in.) white adhesive hook and loop tape (4 pieces of hook and 4 pieces of loop) Materials and tools Creative project Place the printed fabric face down in the picture frame, centre the design, close the frame making sure fabric is tight within frame. 1 Cut the excess fabric to make sure that it is not visible from the front of the frame. 2 Cut the upholstery foam the same size as the picture frame using the utility knife. Use a ruler and a permanent marker to help you mark and cut a straight line. 3 Lay the plain fabric face down on a work surface. Place the foam at the center of the piece of plain fabric. Fold back the excess fabric on all four sides of the foam by pulling it tight and holding it in place using sewing pins. 4 Insert hem tape in each fabric fold on each side. Using the iron, fuse in place by pressing each of the folds for 15 seconds. Remove the sewing pins as you go along. 5 Peel and stick four strips of the hook tape on the back of the picture frame. Peel and stick four strips of the loop tape on the back of the cushion, making sure to align the placement of the hook and loop strips. Lay the picture frame on top of the cushion and press firmly for the strips to attach to each other. 6 presented by

Creative Projet project Voyez la capsule vidéo Laptop Plateau tray … · 2019-09-10 · project Place the printed fabric face down in the picture frame, ... for 15 seconds. Remove

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Creative Projet project Voyez la capsule vidéo Laptop Plateau tray … · 2019-09-10 · project Place the printed fabric face down in the picture frame, ... for 15 seconds. Remove

LaptoptrayIf you use your laptop while on a sofa or in bed, a comfortable and practical laptop tray is a must. And you don’t have to buy it: some fabric, a picture frame, some foam and a few tools and supplies is all you need to create one of a kind.

See video

• Printed fabric 40 cm (16 in.)

• Picture frame with glass 33 x 40.5 cm (13 x 16 in.)

• Fabric shears• Upholstery foam

38 x 43 x 7.5 cm (15 x 17 x 3 in.)

• Utility knife• Ruler• Cutting mat

• Permanent marker• Plain fabric 60 cm (24 in.)• Sewing pins• Fusible hem tape• Iron• 4 pieces of 40 cm

(approx. 16 in.) white adhesive hook and loop tape (4 pieces of hook and 4 pieces of loop)

Materials and tools

Creativeproject

Place the printed fabric face down in the picture frame, centre the design, close the frame making sure fabric is tight within frame.

1Cut the excess fabric to make sure that it is not visible from the front of the frame.

2Cut the upholstery foam the same size as the picture frame using the utility knife. Use a ruler and a permanent marker to help you mark and cut a straight line.

3

Lay the plain fabric face down on a work surface. Place the foam at the center of the piece of plain fabric. Fold back the excess fabric on all four sides of the foam by pulling it tight and holding it in place using sewing pins.

4Insert hem tape in each fabric fold on each side. Using the iron, fuse in place by pressing each of the folds for 15 seconds. Remove the sewing pins as you go along.

5Peel and stick four strips of the hook tape on the back of the picture frame. Peel and stick four strips of the loop tape on the back of the cushion, making sure to align the placement of the hook and loop strips. Lay the picture frame on top of the cushion and press firmly for the strips to attach to each other.

6

presented by

je DÉCORE128

S’il vous arrive d’utiliser votre ordinateur tout en

étant confortablement installé sur votre canapé

ou dans votre lit, un plateau adapté est de mise.

Et il n’est pas nécessaire de l’acheter : du tissu,

un cadre, de la mousse de rembourrage ainsi

que quelques outils et accessoires vous suffi ront

à en créer un à votre goût !

Texte Raphaële St-Laurent Pelletier

Matériel et outils• Tissu à motifs

de 40 cm de longueur• Cadre de 33 cm x 40,5 cm

(13 po x 16 po) avec vitre • Ciseaux à tissu • Mousse de rembourrage

de 38 cm x 43 cm x 7,5 cm (15 po x 17 po x 3 po)

• Couteau utilitaire (de type X-Acto)

• Règle

• Tapis de coupe • Stylo-feutre

(de type Sharpie) • Tissu uni de 60 cm

de longueur • Épingles à couture• Ruban à ourlet fusible • Fer à repasser • 4 velcros de 40 cm

(16 po) précollés blancs (2 mâles, 2 femelles)

Placez le tissu à motifs à l’intérieur du cadre, en prenant soin de tendre le tissu et de bien disposer le motif dans le cadre.

Déposez le tissu uni à l’envers sur le plan de travail. Déposez le morceau de mousse de rembourrage au centre du tissu. Rabattez l’excédent de tissu sur les quatre côtés de la mousse, en vous assurant de bien le tendre, puis fi xez-le à l’aide des épingles à couture.

Découpez l’excédent de tissu afi n de vous assurer qu’il soit invisible en dehors des limites du cadre.

Insérez un ruban à ourlet fusible dans les plis de chaque côté du tissu uni. À l’aide du fer à repasser, collez le tout en pressant pendant 15 secondes sur chaque pli. Retirez les épingles à couture au fur et à mesure.

Taillez la mousse de rembourrage de la même taille que le cadre à l’aide du couteau utilitaire. Utilisez la règle et le stylo-feutre pour vous aider à réaliser une coupe droite.

Collez les quatre bandes de velcros mâles (la partie composée de crochets) à l’endos du cadre et les quatre bandes femelles (la partie « velours ») au dos du coussin uni, en prenant soin de les aligner. Superpo-sez le cadre sur le coussin et appuyez fermement.

Projetcréatif

1

4

2

5

3

6

Rec

her

che

et r

éalis

atio

n :

Kim

Tar

dif.

Tis

sus

: Fab

ricv

ille,

co

llect

ion

Mai

son

An

glai

se M

add

y (t

issu

à m

otif

s) n

° 6

769

3 e

t Mer

rill

(tis

su u

ni)

n °

23

010

, fab

ricv

ille.

com

. C

ou

ssin

s ja

un

es :

fab

riq

ués

ave

c le

tis

su M

erri

ll. C

ou

ssin

à m

oti

f : f

abri

qu

é av

ec le

tis

su M

add

y. A

cces

soir

es d

éco

: Fa

bri

cvill

e. C

adre

s : d

e la

pro

pri

étai

re. T

apis

: Ta

pis

du

mo

nd

e, t

apis

du

mo

nd

e.ca

. Ph

oto

s et

vid

éo :

Ton

y D

avid

son

.

www.pratico-pratiques.com/plateau

Voyez la capsule vidéo

Plateau d’ordinateur

Présenté par

F_D1407_128_Projet Créatif_V2.indd 128 2018-08-30 2:52 PM

Page 2: Creative Projet project Voyez la capsule vidéo Laptop Plateau tray … · 2019-09-10 · project Place the printed fabric face down in the picture frame, ... for 15 seconds. Remove

This tray can easily become

a focal point of your decor. Choose a fabric that coordinates

well with your sofa and cushions. If you want

to make a bigger statement, try vivid colours or bold prints.