Cranes & Lifting · 2019-09-18 · Easily adapts to different engine cranes and improves the install/removal operation ... results in Quick Lift action, lower oil pressure needed

Cranes& Lifting

For full details on all products go to www.tqbbrands.com.au

09/19


SpecificationsSafe Working Capacity: 1,200kg (AS1418.5 approved)Adjustable Boom: 250kg, 500kg, 750kg & 1200kgLifting Ram Capacity: 8,000kg > Available as Spare Part: Product Code: 2008Stabiliser Arms Clearance: 195mmDimensions: (Arms Ext): 2300(H) x 960(W) x 550(D)mmSee pic for boom length, height and capacityNett Weight: 85kg

Product Code: 1001T

Foldable Engine Crane - 1,200kg

This Australian Standards AS1418.5 approved TradeQuip “Made for the Trade” hydraulic engine crane has a 8 tonne long stroke lifting ram and double acting pump with a maximum load capacity of 1,200kg. Very simple to use the ‘Quicklift’ double acting hydraulic pump is equipped with automatic safety valve to control the lowering speed under load. This double action ‘Quicklift’ design... works by lifting the load on the UP and DOWN stroke of the ram handle.

The jib extends to the desired lifting capacity of 250kg, 500kg, 750kg or 1200kg secured by a single locking pin. Mounted on 6 swivel castor wheels this engine crane has excellent manoeuvrability around the workshop. The lifting range is 0-2300mm so an engine can be lifted clear out of the engine bay with little effort. With great stability of its wide legs, this crane can also be used to lift machines or other heavy items, making for an excellent piece of equipment for the workshop or warehouse. It is also designed to quickly folds up when not in use to save space in the workshop.

FeaturesIdeal for automotive, light engineering and general workshopsAdjustable boom in four positions for liftingOutrigger legs easily fold up for transport or storageSix swivel castor wheels allow easy mobilityDouble action 8,000kg long stroke hydraulic lifting ramOverload ProtectionConstructed of high-grade steel and built to exacting standards for quality and durabilityLead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rustPaint is oil, grease and dirt-resistant for easy cleanupShort lifting chain & hook with safety latchEasily exceeds Australian Standards AS1418.5 requirements

SpecificationsSafe Working Capacity: 3,000kgFolded Height: 1625mmMaximum Lifting Height @ 3000kg: 2200mmMaximum Lifting Height @ 1000kg: 2500mmJib Length Fully Retracted @ 3000kg: 1370mmJib Length Fully Extended @ 1000kg: 1980mm Overall Length Fully Extended: 2385mmOverall Length Fully Retracted: 1470mmOverall Width Fully Extended: 875mmOverall Width Fully Retracted: 785mmLeg Height 195mmNett Weight: 121.5kg

Product Code: 1193

Engine Crane - 3,000kg

This Heavy Duty TradeQuip “Made for the Trade” Engine Crane has a long stroke lifting ram, a single action pump with a maximum load capacity of 3,000kg. Very simple to use manual hydraulic operation.

The jib extends to the desired lifting capacity of 1000kg, 2000kg or 3000kg secured by a single locking pin. Mounted on heavy duty castor wheels for excellent manoeuvrability around the workshop. The lifting range is 0-2500mm so any large engine can be lifted clear out of the engine bay with little effort. With great stability of its wide legs, this crane can also be used to lift machines or other heavy items, making for an excellent piece of equipment for the workshop or warehouse.

FeaturesIndustrial grade engine craneHeavy duty hydraulic pumpAdjustable boom in four positions for liftingRobust steel fabricated legs with structural supportsLarge castor wheels for easy mobilityTilting lifting hook with latch for safetyT-bar handle with grips on rear of hoist allows greater manoeuvrability control

SpecificationsSafe Working Capacity: 680kgChain Length: 300mmChain Anchor Positions: 3Engine Mount Positions: 4Weight: 6kgCarton: 465 x 190 x 60mm

Product Code: 1030

Engine Crane Load Leveller 680kg

The perfect accessory for our engine cranes, this TradeQuip “Made for the Trade” Engine Leveler reduces the hazards and hassles out of balancing heavy, awkward loads and helps protect engines, transmissions and vehicle damage. Perfect for removing and installing engines, it easily adjusts the angle of the engine simply by turning the swivel handle and is compatible with most good brands of engine cranes.The load leveler includes four 300mm chains with support brackets for increased load security and safety.

FeaturesEasy to use, just crank to levelTilts forward and backward for easy motor mount alignmentHeavy duty steel I-beam constructionBalances engine/transmission for easier installation or removalConstructed of high-grade steel and built to exacting standards for quality and durabilityLead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rustPaint is oil, grease and dirt-resistant for easy cleanupEasily adapts to different engine cranes and improves the install/removal operation4-point mounting system provides maximum controlWorm drive shaft rotates with a built-in swivel handle for easy balancing3 adjustable chain assembly holes for different engine sizes


SpecificationsSafe Working Capacity: 8,000kgMinimum Length: 630mmMaximum Length: 1135mmClevis Base: Ram Diameter: 80mmBase Width: 129mmNett Weight: 10.5kgCarton: 700 x 170 x 150mmGross Weight: 11.5kg

Product Code: 2008

8,000kg Ram to suit Engine Crane

The TradeQuip “Made for the Trade” steel ute crane effortlessly lifts items from the This twin piston TradeQuip “Made for the Trade” 8,000kg Long Hydraulic Ram is the ideal replacement jack for use on TradeQuip hydraulic engine cranes. Mounts directly onto the engine crane and features a slow release function while providing a long 630–1135mm lift range. High quality large diameter twin cylinder hydraulic pump unit results in Quick Lift action, lower oil pressure needed to raise the load, which reduces wear and extends service life. 100% factory vertical load tested for reliability and safety. For vertical use only.

Replacement long hydraulic ram. Suitable replacement for TradeQuip 1001T engine crane.

FeaturesDouble action “Quick Lift” design for quick positioning without loadBuilt in ‘Overload Protection’Constructed of high grade steel to exacting specifications for strength and durabilityLead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to prevent rustPaint is oil, grease and dirt resistantFactory filled with high quality hydraulic jack oil, which offers better corrosion resistance and high/low temperature flexibilityIncludes lift handle for easy operation

SpecificationsHydraulic Jack Capacity: 3,000kgHydraulic Lifting Capacity: 250 - 900KgMaximum Reach of Boom: 1290mm (250kg) 870mm (900kg)Maximum Height (hook height): 2300mm (250kg) 2000mm (900kg) Minimum Height:: 1425mm (from ute tray to boom pivot - excluding boom)Mounting Base:275 x 275mmMounting Base Holes: 8 holes x 16mm (dia) x 110mm (centre-centre)Weight: 48kgCarton 1 of 2 : 1110 x 250 x 180mmCarton 2 of 2 : 340 x 330 x 320mm

Product Code: 2079

Utility Crane Swivel Base - 900kg

The TradeQuip “Made for the Trade” steel ute crane effortlessly lifts items from the ground to ute/truck tray height, then rotates them into the cargo area. The telescopic boom design with manual hydraulic hand pump pivots the boom up and down and swivels 360° for maximum accessibility. Get extra lift where you need it most with this Tradequip Utility Crane that easily lifts loads to 900kg. The steel boom extends up to 1290mm and the base swivels to help you get the best angle when hoisting items onto your ute or truck bed. The pickup crane folds away when not in use.

Note: Crane boom should always be stored and secured in the down position when not in use. This is to protect the chrome ram from elements/corrosion etc and to safely drive the vehicle without having the boom swing around dangerously.

FeaturesPre-drilled base plate makes mounting quick and easyHandles up to 250kg in extended mode and 900kg in retracted modeIncludes chain hook with chain slot lock and one cable hook both with safety latchBase rotates 360 degreesDesigned for vertical lifting onlyNot to be used for lifting personnel or overhead liftingAll steel constructionBoom stores over wheel well when not in use


SpecificationsSafe Working Capacity: 450kgMaximum Lifting Height (base to hook): 1800mm3 Boom Elevation Angles: 3°, 20°, 40° raised manually3 Position Telescoping Boom: 100kg@1670mm, 200kg@1420mm and 450kg@1170mmStorage Height folded (from base): 1300mmLifting Cable: 6m x 2.5mmMounting Base: 250 x 250mmPower Requirement: 12V DC 125ampsRemote Control Cable: 3mNett weight: 58kgCarton: 1230 x 285 x 270mmGross Weight: 61kg

Product Code: RLUC450

Utility Crane - 450kg

The economy Red Label utility crane is designed for lifting goods on and off trucks and utes up to a maximum lifting capacity of 450kg. It is equipped with a powerful 12 volt DC winch for easy lifting. With outstanding features such as compact design, easy installation and minimal space required (folds away when not in use), this crane is perfect in utilities, tray trucks, trailers and loading docks.

FeaturesBoom extension locks in 3 positions3 tier angle boom adjustment360° Continuous Manual Rotation on Sealed Thrust BearingRotation Hand BrakePowered by lateral-magnetic, single-phase capacitance motorOverload ProtectionSingle-handed operationRemote hand controlAll steel constructionEasy vehicle installation

SpecificationsSafe Working Capacity: 1,000kgLift: 3mChain: 6 mm diameter Grade80Weight: 10kgCarton: 250 x 180 x 150mm

Product Code: 6001

Chain Block - 1,000kg

The TradeQuip manual chain block features a steel-casting housing, Grade 80 chain and a compact design that’s perfect for tight spaces. Coated finish lift chain is rust resistant and durable, while zinc-plated pull chain resists corosion. All-steel construction for durability and wear resistance. Ideal for the workshop or factory this chain hoist has a triple spur geared shaft and pinion with load braking. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latch on the load hook. This chain block hoist lifts loads up to 3m high thanks to its sturdy, hardened steel chain. The strength of this hoist can lift up to 1,000kg hassle-free and includes a mechanical load brake to give operator more control when lifting or spotting. This reliable chain hoist is ideal for heavy loads at professional auto repair workshops or industrial factories.

FeaturesMechanical load brake for positive load control when lifting or spottingRugged hardened steel constructionHardened Steel ChainForged steel hooks swivel 360° and have safety latchesDeep groove hand chain wheel makes the chain work betterAutomatic double-pawl braking systemHook is assembled with high-strength locking fasteners



Product Code: 6002


This TradeQuip manual chain block features a steel-casting housing, Grade 80 chain and a compact design that’s perfect for tight spaces. Coated finish lift chain is rust resistant and durable, while zinc-plated pull chain resists corosion. All-steel construction for durability and wear resistance. Ideal for the workshop or factory this chain hoist has a triple spur geared shaft and pinion with load braking. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latch on the load hook. This chain block hoist lifts loads up to 3m high thanks to its sturdy, hardened steel chain. The strength of this hoist can lift up to 1,000kg hassle-free and includes a mechanical load brake to give operator more control when lifting or spotting. This reliable chain hoist is ideal for heavy loads at professional auto repair workshops or industrial factories.



Product Code: 6010


The TradeQuip manual chain block features a steel-casting housing, Grade 80 chain and a compact design that’s perfect for tight spaces. Coated finish lift chain is rust resistant and durable, while zinc-plated pull chain resists corosion. All-steel construction for durability and wear resistance. Ideal for the workshop or factory this chain hoist has a triple spur geared shaft and pinion with load braking. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latch on the load hook. This chain block hoist lifts loads up to 3m high thanks to its sturdy, hardened steel chain. The strength of this hoist can lift up to 1,000kg hassle-free and includes a mechanical load brake to give operator more control when lifting or spotting. This reliable chain hoist is ideal for heavy loads at professional auto repair workshops or industrial factories.




Product Code: 6011


This TradeQuip manual chain block features a steel-casting housing, Grade 80 chain and a compact design that’s perfect for tight spaces. Coated finish lift chain is rust resistant and durable, while zinc-plated pull chain resists corosion. All-steel construction for durability and wear resistance. Ideal for the workshop or factory this chain hoist has a triple spur geared shaft and pinion with load braking. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latch on the load hook. This chain block hoist lifts loads up to 3m high thanks to its sturdy, hardened steel chain. The strength of this hoist can lift up to 2,000kg hassle-free and includes a mechanical load brake to give operator more control when lifting or spotting. This reliable chain hoist is ideal for heavy loads at professional auto repair workshops or industrial factories.


SpecificationsSafe Working Capacity: 250kgLift: 1.5 MetresChain Diameter: 6mmWeight: 2kgCarton: 210 x 100 x 90mm

Product Code: 6014

Lever Chain Block - 250kg

Lightweight 250kg TradeQuip “Made for the Trade” Manual Lever Chain Hoist lifts up to 1.5 metres. One-hand operation allows easy control of load. Super light structure with tough steel construction and compact design can be operated even in high or narrow places. Ideal for use in the workshop or factory this lever hoist has totally enclosed pinion gear with heavy duty brake. Free chaining feature allows slack in chain to be taken up prior to ratchet arm engagement. High quality 6mm diameter steel chain.

FeaturesTough steel constructionHardened Steel Chain360° Swivel Hooks with Safety LatchFree chaining design with friction braking system for quick adjustmentsRequires just 300mm head room for use in tight spaces


SpecificationsSafe Working Capacity: 750kgLift: 1.5 MetresChain Diameter: 6mmWeight: 7kgCarton: 370 x 170 x 140mm

Product Code: 6015

Lever Chain Block - 750kg

Lightweight 750kg TradeQuip “Made for the Trade” Manual Lever Chain Hoist lifts up to 1.5 metres. One-hand operation allows easy control of load. Super light structure with tough steel construction and compact design can be operated even in high or narrow places. Ideal for use in the workshop or factory this lever hoist has totally enclosed pinion gear with heavy duty brake. Free chaining feature allows slack in chain to be taken up prior to ratchet arm engagement. High quality 6mm diameter steel chain.

FeaturesTough steel constructionHardened Steel Chain360° Swivel Hooks with Safety LatchFree chaining design with friction braking system for quick adjustmentsRequires just 300mm head room for use in tight spaces

SpecificationsSafe Working Capacity: 450kgMaximum Height: 875mmMinimum Height: 280mmTable Size: 810(L) x 500(W)mmWheel Diameter: 125mm Carton: 980x560x300mmWeight: 74kg

Product Code: 6003T

Scissor Lift Workshop Trolley - 450kg

The TradeQuip “Made for the Trade” moveable, Hydraulic Scissor Lift Table can position and raise your work piece up to 875mm by simply pumping on the foot pedal to the desired height. Features include a hand release lever to safely lower a heavy piece of work and two locking swivel castors to ensure stability once the scissor lift table is shifted into position. This piece of equipment is ideal for any garage, workshop or parts warehouse dealing with heavy parts such as engine blocks, large cylinder heads, diff housings and transmissions!This “Made for the Trade” 6003T Scissor Lift Table has a 450kg Safe Working Capacity and is fitted with wheels, designed to carry that weight with sealed bearings and polyurethane tyres, to ensure heavy loads can be transported smoothly and precisely, to and from the work area. Manually lift this work table ergonomically via the hydraulic operated foot pump which efficiently elevates the table top reducing strain and fatigue from having to bending over. Easy to elevate with the convenient hydraulic foot pump and easy to lower... via the release lever on the handle to go down in a controlled manner.In addition, this 6003T scissor lift table can be used as a convenient mobile work bench so you can work at different heights to reduce the risk of back injury. Our manual hydraulic scissor lift table is ergonomically designed to elevate the table to the best height reducing strain and fatigue from bending over for long periods.

FeaturesFoot-operated hydraulic pedal keeps your hands freeQuick release hand lever for easy, controlled hydraulic releaseHeavy duty oil-resistant nonslip rubber matTwo locking heavy duty swivel castorsConvenient fold down handlePowder coated for extra protection from wear and tear.Perfect for moving heavy parts to and from the vehicle.


SpecificationsSafe Working Capacity: 500kgMaximum Height: 770mmMinimum Height: 295mmTable Size: 810(L) x 500(W)mmWheel Diameter: 125mmNett Weight: 58kgCarton: 970 x 550 x 320mmGross Weight: 61kg

Product Code: 6006


The TradeQuip “Made for the Trade” moveable, Hydraulic Scissor Lift Table can position and raise your work piece up to 770mm by simply pumping on the foot pedal to the desired height. Features include a hand release lever to safely lower a heavy piece of work and two locking swivel castors to ensure stability once the scissor lift table is shifted into position. This piece of equipment is ideal for any garage, workshop or parts warehouse dealing with heavy parts such as engine blocks, large cylinder heads, diff housings and transmissions!This “Made for the Trade” 6006 Scissor Lift Table has a 500kg Safe Working Capacity and is fitted with wheels, designed to carry that weight with sealed bearings and polyurethane tyres, to ensure heavy loads can be transported smoothly and precisely, to and from the work area. Manually lift this work table ergonomically via the hydraulic operated foot pump which efficiently elevates the table top reducing strain and fatigue from having to bending over. Easy to elevate with the convenient hydraulic foot pump and easy to lower... via the release lever on the handle to go down in a controlled manner.

FeaturesFoot-operated hydraulic pedal keeps your hands freeQuick release hand lever for easy, controlled hydraulic releaseHeavy duty oil-resistant nonslip rubber matTwo locking heavy duty swivel castorsConvenient fold down handlePowder coated for extra protection from wear and tear.Perfect for moving heavy parts to and from the vehicle.

SpecificationsSafe Working Capacity: 500kgMaximum Height: 1575mmMinimum Height: 440mmTable Size: 1010(L) x 520(W)mmWheel Diameter: 150mmDimensions: 1130x520x1260mmNett Weight: 144kgCarton: 1140 x 575 x 450mmGross Weight: 157kg

Product Code: 6007T


This TradeQuip “Made for the Trade” moveable, hydraulic scissor lift table can position and raise your work piece up to 1585mm by simply pumping on the foot pedal to the desired height. Features include a hand release lever to safely lower a heavy piece of work and two locking swivel casters to ensure stability once the scissor lift table is shifted into position. This piece of equipment is great for any garage, workshop or parts warehouse dealing with heavy parts!

Manual hydraulic lift table ergonomically designed with a foot pump to elevate the table reducing strain and fatigue from bending over. Easy to use pump to elevate up and release handle for it to go down in a controlled manner.

In addition, this 6007T “High Lift” scissor lift table can be used as a convenient mobile work bench so you can work at different heights to reduce the risk of injury.This scissor lift is manufactured to withstand day-to-day working environments; allowing you to get on with the job in hand. The “Made for the Trade” 6007T scissor lift table has a 500kg capacity and is fitted with wheels, designed with sealed bearings and polyurethane tyres, to ensure loads can be transported smoothly and precisely.

FeaturesDouble Scissor High LiftFoot-operated hydraulic pedal keeps your hands freeQuick release hand lever for easy, controlled hydraulic releaseHeavy duty oil-resistant nonslip rubber matTwo locking heavy duty swivel castorsAll steel constructionPowder coated for extra protection from wear and tear.Perfect for moving heavy parts to and from the vehicle.


SpecificationsSafe Working Capacity: 300kgMaximum Height: 770mmMinimum Height: 285mmTable Size: 810(L) x 500(W)mmWheel Diameter: 125mmNett Weight: 53kgCarton: 960 x 550 x 280mmGross Weight: 56kg

Product Code: RLSLT300


Our economy Red Label Scissor Lift Table / Trolley 300kg is widely used as a scissor lift table to transport parts and materials around the workshop. This scissor lift trolley can be manually pumped to the required height through its hydraulic foot pump mechanism. The foot pump raises and lowers the platform using a single scissor lift and hydraulic cylinder.

FeaturesRear braking systemThe handle folds flat for easy storagePerfect for moving heavy parts to and from the vehicleHand release lever to lower the table to preferred heightEasy to use foot pump allows user to lift to desired heightPowder coated for extra protection from wear and tear

TQB Brands has grown to become one of the most respected garage equipment suppliers in Australia and markets the recognised leading brands TradeQuip, TQ Pro, Borum and Red Label Nationally through 1000+ distributors. We offer an extensive range of products including Garage & Workshop, Industrial, Agricultural and Vehicle Service Equipment. We continually strive to introduce new and innovative garage and workshop tools and equipment for the professional, which comply with mandatory Australian Standards. TQB Brands aims to achieve great value for money whilst not compromising on quality. TQB Brands prides itself on offering fit for purpose product through our tiered brand offerings.

Our price competitive range of tools & equipment is offered under the brand “Red Label”. This short range of popular products, offers a “Great Price” whilst maintaining ‘fit for purpose’ quality assurance standards. Not designed to withstand everyday use, “Red Label” branded products are covered by a 1 year domestic use warranty and a 3 month trade use warranty.

Our Flagship brand of garage and workshop equipment, TradeQuip is designed for use in a demanding garage and workshop environment by trade users. With proven and trusted “Made for the Trade” reliability, TradeQuip branded products offer the very best in performance for an affordable price. The TradeQuip range is covered by a 12 month trade use warranty.

Our “heavy duty commercial” range of Borum Industrial equipment has been manufactured to exacting standards for the past 34 years. We specify industrial quality components and design to ensure a long and durable working life in commercial transport, mining, earthmoving and railway environments. Our Borum Industrial range of equipment is focused on achieving superior professional standards, reliability, quality, and are covered by a 12 month trade use warranty.

GREATPRICE!

INDUSTRIAL QUALITY

TQ Pro top quality Tools and Equipment are designed and manufactured for specialist professional use in a garage and workshop environment. TQ Pro products are strong, reliable, and well finished for the expert tool user who appreciates professional design, reliability, and attention to detail. Covered by our 12 month trade use warranty, our TQ Pro Tools & Equipment are made with pride to deliver the best combination of professional performance, presentation, and reliability.


Documents

Cranes & Lifting · 2019-09-18 · Easily adapts to different engine cranes and improves the install/removal operation ... results in Quick Lift action, lower oil pressure needed