Corporate Competence Center -Turbine MattressesKAEFER locations worldwide

For turbine references please contact:

KAEFER Isoliertechnik GmbH & Co. KG

Corporate Competence Center Mattresses (CCCM)

Getreidestr. 3

28217 Bremen, Germany

Phone +49 421 6109 370

Fax +49 421 6109 387

www.kaefer.com

Global logistics

Irrespective of the project location,

KAEFER’s CCCM can ensure timely

and complete supply of products and

materials, without exceptions. The

department takes care of all aspects

required for a safe delivery to site,

including:

> Supply

> Combination

> Appropriate packaging to ensure safe

transportation

> Transportation

The department provides detailed

instructions for preparation

and transportation of materials.

Furthermore, CCCM documents and

controls the whole supply process.

Key Account Management

As the “One face to the customer”

principle is becoming more popular

with businesses worldwide, the CCCM

department recognizes that it is not

only important for clients to receive

their goods and services. Furthermore

these goods and services have to

meet high quality standards as well.

CCCM offers their customers a highly

competent contact person in Germany,

who supports the client and coordinates

all projects worldwide.

Key benefits:

> High and constant quality standard

on all sites

> Permanent contact person

> Project management to European

standards

> Short official channels

> Access to KAEFER locations in more

than 50 countries worldwide

Research & Development

The CCCM department and our clients

can count on the support and guidance

of the KAEFER Technology & Research

Department. The department specialises

in heat insulation, cold insulation, sound

insulation, fire protection and special

techniques (e.g. scaffolding).

Specialist services provided include:

> Computational calculations

> Materials testing facilities

- incl. climate chamber, acoustic

laboratory, strength testing and

systems testing

> Planning and execution of large scale

tests

> Seminars and trainings for advanced

learners

> Large network of research facilities

including: IfaM, Faserinstitut, IWT,

MPA Bremen, FIW München, MPA

Dortmund and others

130702 CCCM; Turbine Mattresses_GB.indd 5-1 02-07-2013 08:59:38

The CCCM department specialises

in development, implementation and

international business. Our services

include:

> Consultancy

> Engineering

> Fabrication

> Material supply

> Installation

> Supervision

> Project Management

> Global logistics

> Key Account Management

> Research & Development

Consultancy

As a reliable partner for insulation

works, CCCM accompanies their clients

during the whole project phase, from

fixing the scope of work through to

support in handling local contractors

during erection. Our consultancy

services include but are not limited to:

> Scope of work

> Advice on latest technologies

> Custom-made solutions

> Comparisons and proposals for

insulation (including alternative

systems)

> Troubleshooting

> Integration of local KAEFER

departments

Engineering

CCCM has extensive experience in

both turbine insulation and export

businesses. The department has a

competent and committed team of

engineers that are able to support

clients throughout the whole project

phase. The following services can be

provided:

> Material selection

> Supporting documentation incl.

assembly instructions

> Inventory

> Completion of documents required

for exportation

> Construction of 2D and 3D-CAD

engineering drawings

> Production control and quality

management

KAEFER is the world’s largest provider

of complete insulation solutions with

operations in over 50 countries and

a current workforce of more than

20,000. Our core business is carried

out in the Industry, Marine & Offshore

and Construction divisions, where we

offer a full range of insulation and

interior outfitting services. Scaffolding,

surface protection, refractory, passive

fire protection and asbestos removal

complete our portfolio.

Professional insulation solutions are by

far the most effective way to increase

energy efficiency and protect the

environment. We have therefore defined

an ambitious goal. Our vision is “To

eliminate the energy waste”. With this

mindset, we are helping companies

every day to make the best use of their

resources.

Beyond our insulation solutions, we

develop distinct product and system

solutions for the improvement of

assembly processes and the integration

of new technologies. Many of our major

customers also contract us to oversee

and implement entire projects from

beginning to end.

Corporate Competence Center –

Turbine Mattresses

Corporate Competence Center

Mattresses (CCCM) within the

department Corporate Competence

Center forms KAEFER’s national and

international competence center for

mattress insulation. CCCM reacts to

increasing technical demands from the

market and ensures the highest quality

and service standards worldwide.

In addition to mattress insulation, CCCM

specialises in international material

deliveries. Besides calculation of the

required material, the performances

include engineering for development of

erection manuals as well as providing

supervision on site. CCCM is familiar

with international insulation standards

and conditions.

Complete insulation solutions worldwide

Services

Apart from complete project

management, CCCM offers

engineering design and consulting

services. It also provides project

supervision by experienced European

supervisors working alongside

local staff. CCCM is supported by

fabrication workshops around the

globe, available in every country in

which KAEFER operates and has

specialised mattress fabrication

facilities in China, Abu Dhabi, Hungary

and Germany.

Capabilities

> Mattress insulation

> Fabrication / Prefabrication

> Engineering

> Conventional insulation

Fabrication / Prefabrication

Based on the engineering drawings

created by our engineers or supplied by

our clients, KAEFER has the capability

to fabricate insulation mattresses,

insulation cassettes and shaped metal

parts (prefabrication). This can be

carried out in KAEFER workshops

around the globe available in every

country in which KAEFER operates

and in specialised mattress fabrication

facilities in China, Abu Dhabi, Hungary

and Germany.

Important aspects:

> Production control

> Quality management

> Rapid available capacity (short lead

times)

> Economic production

> Laydown worldwide

Material Supply

In addition to mattress insulation, the

CCCM department is experienced in

material supply projects. These projects

may be carried out in conjunction

with mattress supply projects or as

stand-alone projects. Key benefits

include:

> Materials conforming to the highest

standards

> Correct quantities being supplied

> Timely delivery worldwide

As with the mattress business, KAEFER

can provide all the previously mentioned

services, including but not limited to the

provision of engineering, supervision

and access to our local branches

worldwide.

Installation

The installation of the insulation

systems on site can also be performed

by KAEFER. The labour may be provided

by the local KAEFER company or other

source as appropriate and can be

trained on site if required.

A KAEFER installation ensures:

> The highest quality of work and

safety

> All work conforms to highest

technical standards

Furthermore KAEFER is available for

repair work and maintenance.

Supervision

Upon request by our client, KAEFER

will supply a highly skilled supervisor

to oversee the mattress installation

on site. If employees are deploid,

KAEFER recommends the addition of a

supervisor to ensure that the highest

standard of installation is achieved.

The main benefits of using a KAEFER

supervisor are:

> Extensive technical knowledge

> Highly motivated leader

> Business fluent in German and

English

> Experienced in international projects

and accomplished in dealing with

other cultures and operations

Project Management

The CCCM department can provide a

complete range of project management

service from start to completion of the

project, such as:

> Safety and quality systems

> Planning and logistics to ensure that

project schedules are met

> Commercial management and

implementation of cost cutting

The project management systems at

KAEFER are defined by the KAEFER

Management Manual and Project Safety

Plan. This ensures the highest standard

of working practices and conforms

to European standards. Certification

includes:

ISO 9001:2008 & OHSAS 18001:2007

130702 CCCM; Turbine Mattresses_GB.indd 2-4 02-07-2013 08:59:56

The CCCM department specialises

in development, implementation and

international business. Our services

include:

> Consultancy

> Engineering

> Fabrication

> Material supply

> Installation

> Supervision

> Project Management

> Global logistics

> Key Account Management

> Research & Development

Consultancy

As a reliable partner for insulation

works, CCCM accompanies their clients

during the whole project phase, from

fixing the scope of work through to

support in handling local contractors

during erection. Our consultancy

services include but are not limited to:

> Scope of work

> Advice on latest technologies

> Custom-made solutions

> Comparisons and proposals for

insulation (including alternative

systems)

> Troubleshooting

> Integration of local KAEFER

departments

Engineering

CCCM has extensive experience in

both turbine insulation and export

businesses. The department has a

competent and committed team of

engineers that are able to support

clients throughout the whole project

phase. The following services can be

provided:

> Material selection

> Supporting documentation incl.

assembly instructions

> Inventory

> Completion of documents required

for exportation

> Construction of 2D and 3D-CAD

engineering drawings

> Production control and quality

management

KAEFER is the world’s largest provider

of complete insulation solutions with

operations in over 50 countries and

a current workforce of more than

20,000. Our core business is carried

out in the Industry, Marine & Offshore

and Construction divisions, where we

offer a full range of insulation and

interior outfitting services. Scaffolding,

surface protection, refractory, passive

fire protection and asbestos removal

complete our portfolio.

Professional insulation solutions are by

far the most effective way to increase

energy efficiency and protect the

environment. We have therefore defined

an ambitious goal. Our vision is “To

eliminate the energy waste”. With this

mindset, we are helping companies

every day to make the best use of their

resources.

Beyond our insulation solutions, we

develop distinct product and system

solutions for the improvement of

assembly processes and the integration

of new technologies. Many of our major

customers also contract us to oversee

and implement entire projects from

beginning to end.

Corporate Competence Center –

Turbine Mattresses

Corporate Competence Center

Mattresses (CCCM) within the

department Corporate Competence

Center forms KAEFER’s national and

international competence center for

mattress insulation. CCCM reacts to

increasing technical demands from the

market and ensures the highest quality

and service standards worldwide.

In addition to mattress insulation, CCCM

specialises in international material

deliveries. Besides calculation of the

required material, the performances

include engineering for development of

erection manuals as well as providing

supervision on site. CCCM is familiar

with international insulation standards

and conditions.

Complete insulation solutions worldwide

Services

Apart from complete project

management, CCCM offers

engineering design and consulting

services. It also provides project

supervision by experienced European

supervisors working alongside

local staff. CCCM is supported by

fabrication workshops around the

globe, available in every country in

which KAEFER operates and has

specialised mattress fabrication

facilities in China, Abu Dhabi, Hungary

and Germany.

Capabilities

> Mattress insulation

> Fabrication / Prefabrication

> Engineering

> Conventional insulation

Fabrication / Prefabrication

Based on the engineering drawings

created by our engineers or supplied by

our clients, KAEFER has the capability

to fabricate insulation mattresses,

insulation cassettes and shaped metal

parts (prefabrication). This can be

carried out in KAEFER workshops

around the globe available in every

country in which KAEFER operates

and in specialised mattress fabrication

facilities in China, Abu Dhabi, Hungary

and Germany.

Important aspects:

> Production control

> Quality management

> Rapid available capacity (short lead

times)

> Economic production

> Laydown worldwide

Material Supply

In addition to mattress insulation, the

CCCM department is experienced in

material supply projects. These projects

may be carried out in conjunction

with mattress supply projects or as

stand-alone projects. Key benefits

include:

> Materials conforming to the highest

standards

> Correct quantities being supplied

> Timely delivery worldwide

As with the mattress business, KAEFER

can provide all the previously mentioned

services, including but not limited to the

provision of engineering, supervision

and access to our local branches

worldwide.

Installation

The installation of the insulation

systems on site can also be performed

by KAEFER. The labour may be provided

by the local KAEFER company or other

source as appropriate and can be

trained on site if required.

A KAEFER installation ensures:

> The highest quality of work and

safety

> All work conforms to highest

technical standards

Furthermore KAEFER is available for

repair work and maintenance.

Supervision

Upon request by our client, KAEFER

will supply a highly skilled supervisor

to oversee the mattress installation

on site. If employees are deploid,

KAEFER recommends the addition of a

supervisor to ensure that the highest

standard of installation is achieved.

The main benefits of using a KAEFER

supervisor are:

> Extensive technical knowledge

> Highly motivated leader

> Business fluent in German and

English

> Experienced in international projects

and accomplished in dealing with

other cultures and operations

Project Management

The CCCM department can provide a

complete range of project management

service from start to completion of the

project, such as:

> Safety and quality systems

> Planning and logistics to ensure that

project schedules are met

> Commercial management and

implementation of cost cutting

The project management systems at

KAEFER are defined by the KAEFER

Management Manual and Project Safety

Plan. This ensures the highest standard

of working practices and conforms

to European standards. Certification

includes:

ISO 9001:2008 & OHSAS 18001:2007

130702 CCCM; Turbine Mattresses_GB.indd 2-4 02-07-2013 08:59:56

The CCCM department specialises

in development, implementation and

international business. Our services

include:

> Consultancy

> Engineering

> Fabrication

> Material supply

> Installation

> Supervision

> Project Management

> Global logistics

> Key Account Management

> Research & Development

Consultancy

As a reliable partner for insulation

works, CCCM accompanies their clients

during the whole project phase, from

fixing the scope of work through to

support in handling local contractors

during erection. Our consultancy

services include but are not limited to:

> Scope of work

> Advice on latest technologies

> Custom-made solutions

> Comparisons and proposals for

insulation (including alternative

systems)

> Troubleshooting

> Integration of local KAEFER

departments

Engineering

CCCM has extensive experience in

both turbine insulation and export

businesses. The department has a

competent and committed team of

engineers that are able to support

clients throughout the whole project

phase. The following services can be

provided:

> Material selection

> Supporting documentation incl.

assembly instructions

> Inventory

> Completion of documents required

for exportation

> Construction of 2D and 3D-CAD

engineering drawings

> Production control and quality

management

KAEFER is the world’s largest provider

of complete insulation solutions with

operations in over 50 countries and

a current workforce of more than

20,000. Our core business is carried

out in the Industry, Marine & Offshore

and Construction divisions, where we

offer a full range of insulation and

interior outfitting services. Scaffolding,

surface protection, refractory, passive

fire protection and asbestos removal

complete our portfolio.

Professional insulation solutions are by

far the most effective way to increase

energy efficiency and protect the

environment. We have therefore defined

an ambitious goal. Our vision is “To

eliminate the energy waste”. With this

mindset, we are helping companies

every day to make the best use of their

resources.

Beyond our insulation solutions, we

develop distinct product and system

solutions for the improvement of

assembly processes and the integration

of new technologies. Many of our major

customers also contract us to oversee

and implement entire projects from

beginning to end.

Corporate Competence Center –

Turbine Mattresses

Corporate Competence Center

Mattresses (CCCM) within the

department Corporate Competence

Center forms KAEFER’s national and

international competence center for

mattress insulation. CCCM reacts to

increasing technical demands from the

market and ensures the highest quality

and service standards worldwide.

In addition to mattress insulation, CCCM

specialises in international material

deliveries. Besides calculation of the

required material, the performances

include engineering for development of

erection manuals as well as providing

supervision on site. CCCM is familiar

with international insulation standards

and conditions.

Complete insulation solutions worldwide

Services

Apart from complete project

management, CCCM offers

engineering design and consulting

services. It also provides project

supervision by experienced European

supervisors working alongside

local staff. CCCM is supported by

fabrication workshops around the

globe, available in every country in

which KAEFER operates and has

specialised mattress fabrication

facilities in China, Abu Dhabi, Hungary

and Germany.

Capabilities

> Mattress insulation

> Fabrication / Prefabrication

> Engineering

> Conventional insulation

Fabrication / Prefabrication

Based on the engineering drawings

created by our engineers or supplied by

our clients, KAEFER has the capability

to fabricate insulation mattresses,

insulation cassettes and shaped metal

parts (prefabrication). This can be

carried out in KAEFER workshops

around the globe available in every

country in which KAEFER operates

and in specialised mattress fabrication

facilities in China, Abu Dhabi, Hungary

and Germany.

Important aspects:

> Production control

> Quality management

> Rapid available capacity (short lead

times)

> Economic production

> Laydown worldwide

Material Supply

In addition to mattress insulation, the

CCCM department is experienced in

material supply projects. These projects

may be carried out in conjunction

with mattress supply projects or as

stand-alone projects. Key benefits

include:

> Materials conforming to the highest

standards

> Correct quantities being supplied

> Timely delivery worldwide

As with the mattress business, KAEFER

can provide all the previously mentioned

services, including but not limited to the

provision of engineering, supervision

and access to our local branches

worldwide.

Installation

The installation of the insulation

systems on site can also be performed

by KAEFER. The labour may be provided

by the local KAEFER company or other

source as appropriate and can be

trained on site if required.

A KAEFER installation ensures:

> The highest quality of work and

safety

> All work conforms to highest

technical standards

Furthermore KAEFER is available for

repair work and maintenance.

Supervision

Upon request by our client, KAEFER

will supply a highly skilled supervisor

to oversee the mattress installation

on site. If employees are deploid,

KAEFER recommends the addition of a

supervisor to ensure that the highest

standard of installation is achieved.

The main benefits of using a KAEFER

supervisor are:

> Extensive technical knowledge

> Highly motivated leader

> Business fluent in German and

English

> Experienced in international projects

and accomplished in dealing with

other cultures and operations

Project Management

The CCCM department can provide a

complete range of project management

service from start to completion of the

project, such as:

> Safety and quality systems

> Planning and logistics to ensure that

project schedules are met

> Commercial management and

implementation of cost cutting

The project management systems at

KAEFER are defined by the KAEFER

Management Manual and Project Safety

Plan. This ensures the highest standard

of working practices and conforms

to European standards. Certification

includes:

ISO 9001:2008 & OHSAS 18001:2007

130702 CCCM; Turbine Mattresses_GB.indd 2-4 02-07-2013 08:59:56

Corporate Competence Center -Turbine MattressesKAEFER locations worldwide

For turbine references please contact:

KAEFER Isoliertechnik GmbH & Co. KG

Corporate Competence Center Mattresses (CCCM)

Getreidestr. 3

28217 Bremen, Germany

Phone +49 421 6109 370

Fax +49 421 6109 387

www.kaefer.com

Global logistics

Irrespective of the project location,

KAEFER’s CCCM can ensure timely

and complete supply of products and

materials, without exceptions. The

department takes care of all aspects

required for a safe delivery to site,

including:

> Supply

> Combination

> Appropriate packaging to ensure safe

transportation

> Transportation

The department provides detailed

instructions for preparation

and transportation of materials.

Furthermore, CCCM documents and

controls the whole supply process.

Key Account Management

As the “One face to the customer”

principle is becoming more popular

with businesses worldwide, the CCCM

department recognizes that it is not

only important for clients to receive

their goods and services. Furthermore

these goods and services have to

meet high quality standards as well.

CCCM offers their customers a highly

competent contact person in Germany,

who supports the client and coordinates

all projects worldwide.

Key benefits:

> High and constant quality standard

on all sites

> Permanent contact person

> Project management to European

standards

> Short official channels

> Access to KAEFER locations in more

than 50 countries worldwide

Research & Development

The CCCM department and our clients

can count on the support and guidance

of the KAEFER Technology & Research

Department. The department specialises

in heat insulation, cold insulation, sound

insulation, fire protection and special

techniques (e.g. scaffolding).

Specialist services provided include:

> Computational calculations

> Materials testing facilities

- incl. climate chamber, acoustic

laboratory, strength testing and

systems testing

> Planning and execution of large scale

tests

> Seminars and trainings for advanced

learners

> Large network of research facilities

including: IfaM, Faserinstitut, IWT,

MPA Bremen, FIW München, MPA

Dortmund and others

130702 CCCM; Turbine Mattresses_GB.indd 5-1 02-07-2013 08:59:38

Corporate Competence Center -Turbine MattressesKAEFER locations worldwide

For turbine references please contact:

KAEFER Isoliertechnik GmbH & Co. KG

Corporate Competence Center Mattresses (CCCM)

Getreidestr. 3

28217 Bremen, Germany

Phone +49 421 6109 370

Fax +49 421 6109 387

www.kaefer.com

Global logistics

Irrespective of the project location,

KAEFER’s CCCM can ensure timely

and complete supply of products and

materials, without exceptions. The

department takes care of all aspects

required for a safe delivery to site,

including:

> Supply

> Combination

> Appropriate packaging to ensure safe

transportation

> Transportation

The department provides detailed

instructions for preparation

and transportation of materials.

Furthermore, CCCM documents and

controls the whole supply process.

Key Account Management

As the “One face to the customer”

principle is becoming more popular

with businesses worldwide, the CCCM

department recognizes that it is not

only important for clients to receive

their goods and services. Furthermore

these goods and services have to

meet high quality standards as well.

CCCM offers their customers a highly

competent contact person in Germany,

who supports the client and coordinates

all projects worldwide.

Key benefits:

> High and constant quality standard

on all sites

> Permanent contact person

> Project management to European

standards

> Short official channels

> Access to KAEFER locations in more

than 50 countries worldwide

Research & Development

The CCCM department and our clients

can count on the support and guidance

of the KAEFER Technology & Research

Department. The department specialises

in heat insulation, cold insulation, sound

insulation, fire protection and special

techniques (e.g. scaffolding).

Specialist services provided include:

> Computational calculations

> Materials testing facilities

- incl. climate chamber, acoustic

laboratory, strength testing and

systems testing

> Planning and execution of large scale

tests

> Seminars and trainings for advanced

learners

> Large network of research facilities

including: IfaM, Faserinstitut, IWT,

MPA Bremen, FIW München, MPA

Dortmund and others

130702 CCCM; Turbine Mattresses_GB.indd 5-1 02-07-2013 08:59:38