Renaissance Orlando at SeaWorldAs of July 8, 2019

Advance AgendaThe Premier Conference for 3D Measurement Professionals

Coordinate Metrology Society Conference

Dolphins anD astronauts

TimeActivity Location

Start End

7:00 AM 5:00 PM Boeing-Only Meeting (Boeing Badge Required) Palani A&B

7:00 AM 5:00 PM Siemens-Only Meeting (By Invitation) Nomeus

7:00 AM 5:00 PM Newport News Shipbuilding Meeting (By Invitation) Tarpon A

8:00 AM 5:00 PM Registration/Check-In Open Exhibitors / Speakers Oceans Foyer

8:00AM 5:00 PMExhibitor Hall Open for Set-up

Badge RequiredOceans 1–8

12:00 PM 4:30 PM Training Sponsored by FARO: Ask the AE Tarpon B

12:00 PM 5:00 PMRegistration / Check-In Open

AttendeesOceans Foyer

1:00 PM 5:00 PM

CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing

Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing

Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS

to take the Level 1 Exam.

Coral B&C

5:30 PM 6:00 PMNew Attendee Orientation

with CMSC Chair Scott SandwithPalani A

6:30 PM 8:30 PM

CMSC Icebreaker Sponsored by

FAROOceans Foyer

General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only

MONDAY July 22, 2019 CMSC Agenda

TUESDAY July 23, 2019 CMSC Agenda

General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only

TimeActivity Location

Start End

6:30 AM 8:30 AM Breakfast Crystal D&E

8:00 AM 2:30 PM Registration Open Oceans Foyer

8:00 AM 8:20 AM Chairman’s Opening Address: Scott Sandwith Oceans 9–12

8:20 AM 9:00 AM Keynote Speaker: Michael Raphael Oceans 9–12

9:00 AM 9:30 AMPresentation: Creating a New Concept in Performance-

Built Sport CatamaransSpeaker: Scott Porta, Porta Performance/FARO

Oceans 9–12

9:00 AM 12:00 PM Training Sponsored by FARO: CAM2 2019 Update Tarpon B

9:00 AM 3:00 PM Training Sponsored by ECM: CMS Certification Prep Walu

9:15 AM 11:45 AM Training Sponsored by Verisurf: Ask the Engineer Veiltail

9:30 AM 10:00 AM

Presentation: Subtle Sources of Error in Laser Trackers Due to Dispersion in the Internal Optical Elements

Speaker: David H. Parker, Parker Intellectual Property Enterprises

Oceans 9–12

9:30 AM 11:30 AM Training Sponsored by NRK: Intro to SpatialAnalyzer Nomeus

10:00 AM 10:30 AM Presentation: Thickness Inspection of Composite Parts

Speaker: Mark Haynes, Spirit AerosystemsOceans 9–12

10:30 AM 5:00 PM CMS Executive Committee Election Polls Open(or vote anytime on personal computer) Oceans Foyer

10:30 AM 11:00 AM

Presentation: Metrology in the R&D for a High Repetition Rate Multi User X-ray

Free-Electron Laser FacilitySpeaker: William Jansma, Argonne National Laboratory

Oceans 9–12

11:00 AM 11:30 AM

Presentation: A Special Target Set for Laser Scanner Spatial Performance Calibration

Speaker: Fangfang Liu, Shanghai Institute of Metrology and Testing Technology

Oceans 9–12

TUESDAY July 23, 2019 CMSC Agenda

General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only

TimeActivity Location

Start End

11:30 AM 12:00 PM

Presentation: Part Density Estimation Using a Laser Scanner

Speaker: Joshua Montano, Los Alamos National Laboratory

Oceans 9–12

12:00 PM 1:30 PM Lunch Co-Sponsored by Quality Magazine & GSI Crystal D&E

12:30PM 5:30 PM Exhibition Hall Open Oceans 1–8

1:00 PM 1:30 PM EZ - Spotlight On New Technology: Accurex Oceans 1–8

1:00 PM 3:00 PM Training Sponsored by NRK: Automated Solutions Nomeus

1:00 PM 4:00 PMTraining Sponsored by FARO: RPM–Programming

Repeat Part Inspections in CAM2Tarpon B

1:00 PM 5:00 PM

CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing

Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing

Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS

to take the Level 1 Exam.

Coral B&C

1:30 PM 2:00 PM EZ - Spotlight On New Technology: Accurex Oceans 1–8

1:30 PM 4:00 PMTraining Sponsored by Verisurf:

Automating Inspection WorkflowsVeiltail

2:00 PM 3:00 PM EZ - Jeopardy Oceans 1–8

3:00 PM 3:30 PM EZ - Spotlight On New Technology: Surphaser Oceans 1–8

3:30 PM 4:30 PM EZ - Ask The Experts: Metrology Applications Oceans 1–8

4:30 PM 5:30 PM EZ - Jeopardy Oceans 1–8

5:00 PM 9:00 PM GSI Users Group Meeting (By Invitation) Palani A

5:00 PM 9:00 PM API Users Group Meeting (By Invitation) Tarpon A

WEDNESDAY July 24, 2019 CMSC Agenda

General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only

TimeActivity Location

Start End

5:15 AM 7:30 AM Fun Run Meet at Oceans Porte-Cochere

6:30 AM 8:30 AM Breakfast Co-Sponsored by Brunson Crystal D&E

8:00 AM 4:30 PM Registration Open Oceans Foyer

8:00 AM 8:15 AM Conference Updates: Scott Sandwith Oceans 9–12

8:00 AM 12:00 PM

CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing

Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing

Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS

to take the Level 1 Exam.

Coral B&C

8:00 AM 4:30 PM CMS Executive Committee Election Polls Open(or vote anytime on personal computer) Oceans Foyer

8:30 AM 9:00 AMPresentation: Metrology Apprenticeship at

Newport News Shipbuilding Speaker: Jessica Walker, Newport News Shipbuilding

Oceans 9–12

9:00 AM 9:30 AM Presentation: DKIST’s Journey of Using a Laser TrackerSpeaker: Shawn Haar, National Solar Observatory Oceans 9–12

9:00 AM 12:00 PM Training Sponsored by 3D Systems: Geomagic Design X Tarpon A

9:00 AM 12:00 PM Training Sponsored by FARO: Introduction to Metrology and Portable CMMs Tarpon B

9:00 AM 3:00 PM Training Sponsored by ECM: CMS Certification Walu

9:15 AM 11:45 AM Training Sponsored by Verisurf:CNC CMM Programming Veiltail

9:30 AM 10:00 AM

Presentation: Noise Filtration of 3D Scanned Data Points in Metrology of Highly Reflective Surfaces

Speaker: Ahmad Barari, University of Ontario Institute of Technology

Oceans 9–12

9:30 AM 11:30 AM Training Sponsored by NRK: What’s New in SpatialAnalyzer Nomeus

10:00 AM 10:30 AMPresentation: Using an Abbreviated Scale Bar

for Abbreviated TestsSpeaker: Vincent Lee, NIST

Oceans 9–12

10:00 AM 12:00 PM PrecisionPath Consortium (By Invitation) Palani B

10:30 AM 11:00 AM

Presentation: Point Density and Fitting Algorithm Interaction in Part Profile Scanning

Speaker: Edward Morse, UNCC Center for Precision Metrology

Oceans 9–12

WEDNESDAY July 24, 2019 CMSC Agenda

General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only

TimeActivity Location

Start End

11:00 AM 11:30 AMPresentation: Developing Low Cost Large Volume

Metrology for Next-Generation Manufacturing SpacesSpeaker: Stuart Robson, University College London

Oceans 9–12

11:30 AM 12:00 PM

Presentation: Tracker Kinematics and Uncertainty Using Quaternions

Speaker: John W Dorsey Palmateer, JDP Metrology Consulting LLC

Oceans 9–12

12:00 PM 1:30 PM Lunch Co-sponsored by Bal-tec Crystal D&E

12:30 PM 5:30 PM Exhibition Hall Open Oceans 1–8

1:00 PM 1:30 PM EZ - Spotlight On New Technology: Hexagon, Leica Oceans 1–8

1:00 PM 3:00 PM Training Sponsored by NRK: SpatialAnalyzer Measurement Plans Nomeus

1:00 PM 4:00 PMTraining Sponsored by FARO: RPM– Roller Alignment

Techniques Using Laser TrackersTarpon B

1:00 PM 5:00 PM

CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing

Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing

Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS

to take the Level 1 Exam.

Coral B&C

1:30 PM 2:00 PM EZ - Spotlight On New Technology: Hexagon, Aicon Oceans 1–8

1:30 PM 3:30 PM Training Sponsored by 3D Systems: Geomagic Control X Tarpon A

1:30 PM 4:00 PM Training Sponsored by Verisurf: Ask the Engineer Veiltail

2:00 PM 3:00 PM Women in Metrology Networking Session Palani A

2:00 PM 3:00 PM EZ - Jeopardy Oceans 1–8

3:00 PM 3:30 PM EZ - Spotlight On New Technology: FARO Oceans 1–8

3:30 PM 4:30 PM EZ - Ask The Experts: The Future of Metrology Oceans 1–8

4:15 PM 5:15 PMWomen in Metrology and STEM

Special Guest Dr. Bonnie DunbarPalani A

4:30 PM 5:30 PM EZ - Final Jeopardy Oceans 1–8

5:30 PM 6:30 PM Happy Hour Sponsored by NRK Oceans Foyer

6:30 PM 9:30 PMCMSC Banquet Co-Sponsored by GSI

Featured Speaker: Dr. Bonnie DunbarOceans 9–12

THURSDAY July 25, 2019 CMSC Agenda

General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only

TimeActivity Location

Start End6:30 AM 8:30 AM Breakfast Crystal D&E

8:00 AM 4:00 PM Registration Open Oceans Foyer

8:00 AM 8:15 AM Conference Updates: Scott Sandwith Oceans 9–12

8:00 AM 12:00 PM

CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing

Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing

Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS

to take the Level 1 Exam.

Coral B&C

8:30 AM 9:00 AMPresentation: Uncertainty Evaluation of Fringe Projection

Based on Linear Systems TheorySpeaker: George Gayton, University of Nottingham

Oceans 9–12

9:00 AM 9:30 AM

Presentation: Computational Challenges for Shop-Floor Laser Radar Commissioning

Speaker: Alexander Schoenberg, FFT - Sensor Technology

Oceans 9–12

9:15 AM 11:45 AM Training Sponsored by Verisurf: Ask the Engineer Veiltail

9:30 AM 10:00 AM

Presentation: Using Coordinate Measurement Machines To Shorten Time To Market For Aerospace Engine

ComponentsSpeaker: David Wick, Zeiss

Oceans 9–12

10:00 AM 10:30 AM

Presentation: Dynamic 3D Measurement of a Deployable Gossamer Antenna Structure Via Multi-Camera

Photogrammetry in Zero GravitySpeaker: Russell Morrison, Geodetic Systems Inc.

Oceans 9–12

10:30 AM 11:00 AMPresentation: Towards Right-Sized Limits: Rationalizing

Build TolerancesSpeaker: Robb Flynn, Electroimpact

Oceans 9–12

11:00 AM 11:30 AM

Presentation: Automated Photogrammetry Robot Calibration and Contour Compensation for Accurate

Cutting OperationsSpeaker: Joe Sabol, Newport News Shipbuilding

Oceans 9–12

TimeActivity Location

Start End

11:00 AM 11:30 AMPresentation: Developing Low Cost Large Volume

Metrology for Next-Generation Manufacturing SpacesSpeaker: Stuart Robson, University College London

Oceans 9–12

11:30 AM 12:00 PM

Presentation: Tracker Kinematics and Uncertainty Using Quaternions

Speaker: John W Dorsey Palmateer, JDP Metrology Consulting LLC

Oceans 9–12

12:00 PM 1:30 PM Lunch Co-sponsored by Bal-tec Crystal D&E

12:30 PM 5:30 PM Exhibition Hall Open Oceans 1–8

1:00 PM 1:30 PM EZ - Spotlight On New Technology: Hexagon, Leica Oceans 1–8

1:00 PM 3:00 PM Training Sponsored by NRK: SpatialAnalyzer Measurement Plans Nomeus

1:00 PM 4:00 PMTraining Sponsored by FARO: RPM– Roller Alignment

Techniques Using Laser TrackersTarpon B

1:00 PM 5:00 PM

CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing

Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing

Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS

to take the Level 1 Exam.

Coral B&C

1:30 PM 2:00 PM EZ - Spotlight On New Technology: Hexagon, Aicon Oceans 1–8

1:30 PM 3:30 PM Training Sponsored by 3D Systems: Geomagic Control X Tarpon A

1:30 PM 4:00 PM Training Sponsored by Verisurf: Ask the Engineer Veiltail

2:00 PM 3:00 PM Women in Metrology Networking Session Palani A

2:00 PM 3:00 PM EZ - Jeopardy Oceans 1–8

3:00 PM 3:30 PM EZ - Spotlight On New Technology: FARO Oceans 1–8

3:30 PM 4:30 PM EZ - Ask The Experts: The Future of Metrology Oceans 1–8

4:15 PM 5:15 PMWomen in Metrology and STEM

Special Guest Dr. Bonnie DunbarPalani A

4:30 PM 5:30 PM EZ - Final Jeopardy Oceans 1–8

5:30 PM 6:30 PM Happy Hour Sponsored by NRK Oceans Foyer

6:30 PM 9:30 PMCMSC Banquet Co-Sponsored by GSI

Featured Speaker: Dr. Bonnie DunbarOceans 9–12

THURSDAY July 25, 2019 CMSC Agenda

General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only

TimeActivity Location

Start End

11:30 AM 12:00 PMPresentation: How to Get the Most Accuracy

Out of Your PCMMSpeaker: Aleksandr Bakhtin, Wagstaff Inc

Oceans 9–12

12:00 PM 1:30 PM Lunch Co-Sponsored by GSI Crystal D&E

12:00 PM 12:30 PM

Presentation: Multilateration with Laser Tracker Applied in Large Scale Coordinate Verification

Speaker: Yu Ren, Shanghai Institute of Measurement and Testing Technology

Oceans 9–12

12:30 PM 5:30 PM Exhibition Hall Open Oceans 1–8

1:00 PM 5:00 PM

CMS Certification ExamsLevel 1 (Base Knowledge) Certification TestingLevel 1 Pilot (CMM Pilot) Certification Testing

Level 2 (Portable CMM Operator) Certification TestingLevel 2 (Laser Tracker Operator) Certification Testing

Level 2 Pilot (Laser Scanner) Certification TestingYou must have approval through CMS/ASPRS

to take the Level 1 Exam.

Coral B&C

1:00 PM 1:30 PM EZ - Spotlight On New Technology: Hexagon, Romer Oceans 1–8

1:30 PM 2:30 PM EZ - Ask The Experts: Metrology Principles Oceans 1–8

1:30 PM 4:00 PM Training Sponsored by Verisurf: Large-Scale Metrology Veiltail

2:30 PM 3:30 PM EZ - Special Presentation: Ben Hughes, NPL Oceans 1–8

4:00 PM 5:00 PMCMS All-Member & Exhibitor Happy Hour

and Feedback SessionOceans 1–8

5:30 PM 9:00 PM Exhibition Hall Teardown Oceans 1–8

FRIDAY JULY 26, 2019 CMSC Agenda

General Sessions Exhibit Hall Meals/Receptions General CMSCCertifications Invitation Only

TimeActivity Location

Start End

7:15 AM 4:00 PMKennedy Space Center Tour

Bus to and From Kennedy Space Center

Meet at Oceans Porte-Cochere