Construction Styles of Toilet Compartments I N D U S T …blainedistribution.com/wp-content/uploads/PDF/Toilet...Standard hardware is chrome plated institutional quality. Stainless

Toll Free: 800-678-1919 Fax: 888-250-3960 e-mail: [email protected] Blaine Drive, Hagerstown, Md 21740-2394 web address: www .blainewindow .com

Construction S tyles of T oiletCompartment s

Solid Plastic T oilet Comp artment s

HEADRAIL BRACED(Most Popular)

For easy, economicalinstallations, theheadrailbraced is a greatchoice. This unitrequires no specialfloor construction;therefore, it can beused in new orold buildings.

CEILING HUNG

Ceiling hung partitionscombine functionalstyling with an unob-structed floor area whichsimplifies cleaning andreduces the cost ofmaintenance.

FLOOR TO CEILING

Floor to ceiling isrecommended for allareas subject to heavyusage. For problemareas we recommendthe use of full lengthaluminum brackets andhinges.

FLOOR SUPPORTED

Floor supportedpartitions have thesame functional linesas ceiling hungpartitions without thetop structure.

Comtec’s solid plastic compartments come closer to beingtotally maintenance free than any other toilet compartmentson the market today.

Comtec is a seamless, one piece, solid homogenous polymer resinsheet produced under heat and high pressure.

The compartment panels, doors and pilasters are manufactured tohandle the toughest reqauirements and meet construction needs.The texture gloss finish is an ideal material for applications from toiletcompartment systems to dressing room compartments with anemphasis on the needs of the handicapped.

Comtec is exceptionally resistant to marking by pens, cosmetics,pencils, most markers and paints. . . easily cleaned using a non-abrasive Industrial-Strength detergent.

Comtec sheets and compartments are available to meet a widerange of applications including vanity tops, benches and other relatedproducts.

Comtec products and systems are designed to hold-up under thetoughest of conditions and environments with little or NO mainte-nance. The products and materials are designed and engineered towithstand the most rigorous use and will maintain the “Same QualityAppearance” as the day they were installed.

GRAFFITI RESISTANT

Applications - Ideal for wet, corrosive areas that receive high useincluding schools, parks, gas stations, amusement areas, swimmingpools and factories.

ASTME 84 TESTED CLASS “A”MATERIAL AVAILABLE

COST EFFECTIVEComtec compartments are a cost effective solution for publicrestroom construction and replacement . . . saving maintenancedollars.

LOW MAINTENANCE

Comtec compartments are designed to be a low maintenance systemand provide an attractive design feature to building maintenanceengineers. The protective finish of Comtec is self lubricating andresists ink, pencil, cosmetics and most other instruments. In mostinstances, stains and marks can be easily removed with a commonindustrial cleaner. The color of the compartment is homogeneouslycompounded throughout the material. (Paint will not adhere to thesurface of Comtec). Excessive moisture, corrosion from steamcleaning or pressure hose methods of maintenance will not harmComtec.

Comtec/Capitol guarantees its panels against breakage,corrosion and delamination for 15 years from the date ofreceipt by the customer(Labor not included in Comtec Warranty)

COMTEC / CAPITOL GUARANTEE

I N D U S T R I E SI N D U S T R I E SI N D U S T R I E SI N D U S T R I E SI N D U S T R I E S

J9-3

Plastic Laminate T oilet Comp artment s

Plastic laminate product s provide the best solution when durability and beauty are required. They provide architect s anddesigners unlimited color and p attern selection, combined with graffiti resist ance, ease of maintenance and durability .

Available in fourconstruction styles -headrail braced,ceiling hung, floor toceiling and floorsupported. Color tobe selected frommanufacturer ’sstand chart s for thisproduct.



Sunlight (quick ship series)

Quick ship series compartments are ideal for projects requiringimmediate shipment. Customers doing renovations, tenant workand fast tract projects can rely on a complete inventory of itemsand the most dependable delivery in the industry. We offer 3neutral colors to complement any restroom design. Panels anddoors have a thickness of 7/8” and pilasters are 1-1/4” thick.Standard hardware is chrome plated institutional quality.Stainless steel hardware, chrome plated brass and continuoushardware are available as an extra cost option (selection ofoptional hardware may increase delivery times). Unlike maycompanies, the quick shipment of this series compartment isoffered at no extra cost, and this product is also pricedeconomically, making it a great value.

Sunburst (special order series)

Special order series compartments set the architectural standardby offering unlimited color flexibility combined with the finestquality product line. Special order series compartments are theideal solution for all types of public facilities. Several hundredcolors and patterns are available enabling architects and design-ers the ability to use durable plastic laminates without compromis-ing color designs. Panels and doors are a full 1 inch thick andpilasters are 1-1/4” thick. Standard hardware is chrome platedinstitutional quality. Stainless steel hardware, chrome plated brasshardware, and continuous hardware are available at extra cost.Our lead times for this product line are the quickest in the industry.Over the years we have proven our ability to produce specialorders quickly without unnecessary up charges. Better service,enhanced color selection and quick delivery do not translate toextended lead times and higher costs with this series.

Eclip se (phenolic core comp artment s)

Phenolic material is a solid plastic material made of laminate colorsheets thermally fused to a phenolic core. The color sheets arefused under heat and pressure to the core to form a solid sheet.Solid core products are ideal for areas that require extremedurability. Virtually unbreakable and waterproof, they can be usedin wet areas or areas that require hose down cleaning. Abusiveareas can rely on the strength of the core to eliminate breakage.Unlike other solid plastic materials, color selection is unlimited.The same range of colors and patterns are available for phenolicthat are available for any plastic laminate. With unlimited colorselection, architects and designers can achieve the color co-ordination in their designs without sacrificing the desirableproperties of a solid plastic. Doors and pilasters are3/4” thick and panels are 1/2” thick. Standard hardware is stain-less steel. Continuous stainless and continuous aluminumbrackets and hinges are available as an extra cost option.


J9-4

Steel Powder Coated T oilet Compartments

FEATURES

1. All p artitions have welded construction onperimeters and corners.

2. For protection against rust, all steel isgalvanized and bonderized with .00015 zinccoating.

3. All hardware is heavy Zamaccastings, chrome plated. Brass available atextra charge as specified.

4. All p arts are pre drilled for ease of inst allation.

JLK

A. Upper door bracket and stainlesssteel pin. This is a heavy Zamaccasting made an integral part of thedoor as it is inbedded with in pre-formed abscesses. The stainless steelpin goes through door and brack forthree-point bearings. Operates in azytel self-lubricating bushing.

B. Top hinge bracketC. Bottom hingebracketThese are heavyZamac No. 3 castings,chrome plated with a5/8” flange whichwraps around thepilaster for maximumstrength. Hingebrackets are through-bolted with one way,theft-proof screws.The bottom hingeworks on opposingzytel cams which areself lubricating toinsure trouble freeoperation and quietaction.

D

D. Concealed latch andemergency cover plate. Latchhas a fully concealed case madeof Zamac No. 3 castings withstainless steel bolt and mortisedface plates fully tamper and theftproof. Cover plate is a ZamacNo. 3 chrome plated castingwhich snaps in place. This has aslot for emergency entrancefeature as standard.

B

C

H. Welded construction. We weldthe doors and pilasters 18” on centeraround the entire perimeter formaximum strength and durability.We weld and grind all corners. Nocorner clips are used.

L. Pilaster Shoe. Shoe is made of 302stainless steel and is of one piece construc-tion. Shoe assembly has snap down actionon a concealed hold down clip. Thiseliminates unsightly screws and saves oninstallation time. Shoe is vandal-proof andcannot be removed.

K. Jack-leveling device for Type aamcoHeadrail Braced is used as standard.Heavy-duty bolt provides loadbearingand a permanent base for panels andpilaster with the use of levelling screws.This saves installation time and assuresa plumb and long lasting installation.

J. Carrying member for Type aamcoFloor supported is a 1/2” x 1” solid bar formaximum strength and durability. Thissaves installation time and assures aplumb and long lasting installation.

K

J

L

E

F

F. Wall bracket.and G. Pilasterbrackets are heavyZamac No. 3chrome platedcastings oranodized alumi-num.

G

H

A

E. Doorstrike andkeeper. HeavyZamac No. 3chrome platedcastings with awrap around flangefor maximumdurability that isthrough bolted withone way theft proofscrews.


J9-5

C

Steel Powder Coated T oilet Compartments

FEATURES

1. All p artitions have welded construction onperimeters and corners.

2. For protection against rust, all steel isgalvanized and bonderized with .00015 zinccoating.

3. All hardware is heavy Zamaccastings, chrome plated. Brass available atextra charge as specified.

4. All p arts are pre drilled for ease of inst allation.

JLK

A. Upper door bracket and stainlesssteel pin. This is a heavy Zamaccasting made an integral part of thedoor as it is inbedded with in pre-formed abscesses. The stainless steelpin goes through door and brack forthree-point bearings. Operates in azytel self-lubricating bushing.

B. Top hinge bracketC. Bottom hingebracketThese are heavyZamac No. 3 castings,chrome plated with a5/8” flange whichwraps around thepilaster for maximumstrength. Hingebrackets are through-bolted with one way,theft-proof screws.The bottom hingeworks on opposingzytel cams which areself lubricating toinsure trouble freeoperation and quietaction.

D

D. Concealed latch andemergency cover plate. Latchhas a fully concealed case madeof Zamac No. 3 castings withstainless steel bolt and mortisedface plates fully tamper and theftproof. Cover plate is a ZamacNo. 3 chrome plated castingwhich snaps in place. This has aslot for emergency entrancefeature as standard.

B

C

H. Welded construction. We weldthe doors and pilasters 18” on centeraround the entire perimeter formaximum strength and durability.We weld and grind all corners. Nocorner clips are used.

L. Pilaster Shoe. Shoe is made of 302stainless steel and is of one piece construc-tion. Shoe assembly has snap down actionon a concealed hold down clip. Thiseliminates unsightly screws and saves oninstallation time. Shoe is vandal-proof andcannot be removed.

K. Jack-leveling device for Type aamcoHeadrail Braced is used as standard.Heavy-duty bolt provides loadbearingand a permanent base for panels andpilaster with the use of levelling screws.This saves installation time and assuresa plumb and long lasting installation.

J. Carrying member for Type aamcoFloor supported is a 1/2” x 1” solid bar formaximum strength and durability. Thissaves installation time and assures aplumb and long lasting installation.

K

J

L

E

F

F. Wall bracket.and G. Pilasterbrackets are heavyZamac No. 3chrome platedcastings oranodized alumi-num.

G

H

A

E. Doorstrike andkeeper. HeavyZamac No. 3chrome platedcastings with awrap around flangefor maximumdurability that isthrough bolted withone way theft proofscrews.


J9-5

C

Blaine Lavatory Partitions

21-5/8"w x 58"h Door23-5/8"w x 58"h Door25-5/8"w x 58"h Door27-5/8"w x 58"h Door29-5/8"w x 58"h Door31-5/8"w x 58"h Door33-5/8"w x 58"h Door35-5/8"w x 58"h Door

15-1/2"w x 58"h Panel17-1/2"w x 58"h Panel21-1/2"w x 58"h Panel23-1/2"w x 58"h Panel25-1/2"w x 58"h Panel27-1/2"w x 58"h Panel29-1/2"w x 58"h Panel31-1/2"w x 58"h Panel33-1/2"w x 58"h Panel35-1/2"w x 58"h Panel37-1/2"w x 58"h Panel39-1/2"w x 58"h Panel45-1/2"w x 58"h Panel51-1/2"w x 58"h Panel54-1/2"w x 58"h Panel57-1/2"w x 58"h Panel69-1/2"w x 58"h Panel

3"w x 82"h Pilaster 4"w x 82"h Pilaster 5"w x 82"h Pilaster 6"w x 82"h Pilaster 7"w x 82"h Pilaster 8"w x 82"h Pilaster10"w x 82"h Pilaster12"w x 82"h Pilaster

Doors, panels, pilasters and urinal screens - specify steel by adding 050 to the endof the stock number or plastic laminate by adding 058. Alum. headrail - pecify 040for use on steel pilasters or PL-040 for use on plastic laminate pilasters.

Entry And Urinal ScreensComplete with mounting hardware

Bracket Supported Finishes:Baked enamel on steel andhigh pressure plastic laminate.

Sizes:18"w x 42"h24"w x 42"h

Pilaster Supported Finishes:Baked enamel on steel andhigh pressure plastic laminate.

Panel Sizes:35-1/2", 37-1/2", 39-1/2" and45-1/2" wide x 58" high

Pilaster Size:6"w x 70" high

Post Supported Finishes:Baked enamel on steel andhigh pressure plastic laminate.

Panel Sizes:15-1/2"x 17-1/2"x 21-1/2",23-1/2", 25-1/2", 27-1/2", 29-1/2",31-1/2" and 33-1/2" wide x58"high

Aluminum Post:1-3/4" x 1-3/4" x 70"high

For more infomation regarding ourToilet Partitions, including color selection and material used, pleasecontact our Customer ServiceDepartment at 800-678-1919.

SCREENS & POSTS TPSP9123 6" x 70"h Screen Pilaster-use a 35-1/2"-

45-1/2"w panel for pilaster supportedurinal screen (sold separately)

TPUS9132 18"w x 42"h bracket supported screen TPUS9133 24"w x 42"h bracket supported screen TPAP9142-040 Aluminum Post - 1-3/4" x 1-3/4" x 70"h

Toilet Partitions & Hardware

DOORSStock Number TPDR9100 TPDR9101 TPDR9102 TPDR9103 TPDR9104 TPDR9105 TPDR9106 TPDR9107PANELS TPPL9108 TPPL9109 TPPL9110 TPPL9111 TPPL9112 TPPL9113 TPPL9114 TPPL9115 TPPL9116 TPPL9117 TPPL9118 TPPL9119 TPPL9120 TPPL9121 TPPL9122 TPPL9173 TPPL9174PILASTERS TPPR9124 TPPR9125 TPPR9126 TPPR9127 TPPR9128 TPPR9129 TPPR9130 TPPR9131ALUMINUM HEADRAILS TPAH9134 TPAH9135 TPAH9136 TPAH9137 TPAH9138 TPAH9139 TPAH9140 TPAH9142

37" L Aluminum Headrail56" L Aluminum Headrail66" L Aluminum Headrail70" L Aluminum Headrail72" L Aluminum Headrail74" L Aluminum Headrail82" L Aluminum Headrail96” L Aluminum Headrail


J9-7


5 Day Quick Ship Headrail Braced Partitions Available in S tainlessSteel or Baked Enamel on S teel in Almond, Light Gray and T an.

Blaine S tandard T oilet Partition Layout sDetermine the following when ordering Baked Enamel on S teel, Stainless S teel, High PressureLaminate, Solid Phenolic Laminate & Solid Plastic Polymer Partitions:1. Determine Layout T ype (see Below):

Free StandingIn CornerBetween W allsAlcoveEntry & Urinal Screens

2. Partition T ype and S tyle:A. Solid Plastic, Met al or LaminateB. Type of Brace Required (headrail, floor , ceiling hung)

3. Complete Layout of T oilet Partition S tall(s)A. Width of st allB. Depth of st allC. Total wid th availableD. Width of doors, if known.

4. Indicate whether a handicapped accessible unit (ADA) is required.

5. Indicate color required.

Metal partitions are solid in a st andard 58” door height. Solid plastic p artitions are sold in a st andard 55” door height.Replacement doors, p anels, pilasters and hardware are also available sep arately .

Typical T oilet Partition Layout Finished Ceiling

Ceiling Hung

Free Standing w/ 1 S tall Btwn W alls w/ 2 S talls

In Corner w/ 1 S tall Alcove

Floor Braced

Headrail Braced (most commonly used)

J9-8

Grab Bars

GRAB BAR APPLICATIONSBAR NUMBER LENGTH NUMBER 12 12" NUMBER 16 16" NUMBER 18 18" NUMBER 24 24" NUMBER 32 32" NUMBER 36 36" NUMBER 42 42" NUMBER 48 48"

This is strictly a representation of the grab bars available through Blaine. Contact ourCustomer Service Department for detailed literature and assistance.

OTHER GRAB BAR APPLICATIONS

32"

16"

No. 5L Left Hand Shown

32"

16"

No. 52

26"

26"

No. 55

12" 12"

120

No. 60

30"

33"

No.75R

Right Hand Shown

Right Hand Shown

No. 70

30"24"

33"

No. 80

24" 24"

16"

No. 50 No. 40 Right Hand Shown No. 10 Non Handed

40"20"

40"

12"

32"

No. 15

o

STRAIGHT BARS

CONCEALEDROUND

TUBEDIAMETER

1"

1-1/4"

#73

#74

#69

#71

Bolt Hole Circle2-1/4"

3"

3/16"Three 1/4-20set screws inlip

7/32" X 1/2"

1-3/4"2-11/16"

1-1/4" X 3/8"

1-1/2" #72#75

Specify center support when required

FLANGE SPECIFICATIONS

No. 5R

54" 36"

45"

30"

33"

8"

6"

32"

36"

7"7"


SNAP-ON

#89

#90

#91

3-3/4”

2-1/4”

2-11/16”

5/16” x 1/2”

Cover rotates toexposemounting holesfor easierinstallation

J9-9


Door HardwareINSWINGAll packs are supplied withseries #4000 door hooksand mounting hardware.

TOP HINGEASSEMBLY

OUTSWINGAll packs are suppliedwith series #4020 doorhooks and mountinghardware.

BOTTOM HINGEASSEMBLY

5110

4120

DoorSize

PostSize

ChromePlatedZamac

Latch TopHinge

Bottom Hinge

Strike/ Keeper

One PcKeeper

One Pc Strike

TopInsert

Bottom Insert

Hinge Pin

Chrome Plated Brass

Polished Brass

Cast S.S.

DoorSize

PostSize

ChromePlatedZamac

Latch TopHinge

Bottom Hinge

Strike/ Keeper

One Pc Strike

TopInsert

Bottom Insert

Hinge Pin

Chrome Plated Brass

Polished Brass

Cast S.S.

DoorPull

DoorStop

991093790

2820

2810

98275

98265

3290

J9-10

5020

6200

40001-7/8”

3”

3-3/16”

1-19/32”

1-1/16”4020

3”

50205210

1-1/2”4-1/16”


Door Hardware

REPLACEMENT PACKS

TOP HINGE ONLY

BOTTOM HINGE ONLY

TOP & BOTTOM HINGES

REPLACEMENT PACKS

63140 63130

3510

9713

3010

98584

98175

9713

99109

3790

910139713

91013

98245

98175

3290

9813

J9-11

2820

9713

281098185

9813

9813

9813


Surface Mounted Door PacksInswing All packs are supplied with series #4000

door hooks and mounting hardware

7113

51135053

5023

Door Size

PostSize Part #

Swing ofDoor

LatchHinge Set

Strike/Keeper

One PcStrike

One PcKeeper

ChromePlatedBrass

PolishedBrass

Door Size

PostSize

Swing ofDoor

LatchHinge Set

Strike/Keeper

One PcStrike

One PcKeeper

Part #

Door Size

PostSize

Swing ofDoor

LatchHinge Set

One PcStrike

One PcKeeper

Part #

J9-12

7011

7073

5023 5113

5033

7413

7043

1-1/2”

2-29/32”

1-9/16”

1-1/4”

2-3/4” 3-1/2”

5163 40035173

1-1/2”1-1/2”

2-3/4”

7/8”

3”

5173

1-1/2”

5183

1-1/2”

2-3/4”

3-1/8”

3”1-1/2”

3-1/4”

2-29/32”

1-1/2”


Surface Mounted Door PacksOutswingAll packs are supplied with series #4020

door hooks and mounting hardware

5173

5023

5053

4123

J9-13

7011

7073

7413

7043

5023

4023

5403

1-1/2”2-13/16”

7113

1-1/2”2-29/32”

1-1/2”2-1/2”

1-1/2” 3”

1-1/2”

1-1/2”

5213

3”

1-3/16”

1-1/2”

5173

4-1/2”

3-1/2”

6203

4-1/16”

4-3/4”


Prepackaged HardwarePanel & Pilaster Packs

All packs are supplied withmounting hardware

Two ear panel packs

One ear panel packs

One ear pilaster packs

Two ear pilaster packs

J9-14


Prepackaged Hardware

Alcove, Urinal, Angle Bracket, Headrail PacksAll packs aresupplied withmountinghardware

Alcove Packs(Two Ear)

Urinal Screen Packs

Angle Bracket Packs

Headrail CornerPack

Alcove Packs(One Ear)

Headrail MountingPacks

15700 15800

15790 1573015750

J9-15


Wall BracketsCastings All Brackets At 1-1/2”Lengths

Two Ear1750

One Ear1840

Two Ear-Urinal1613

Two Ear - Mini1810

Two Ear-Urinal(X-High)1280

Two Ear- (X-High)1260

One Ear - (X-High)1270

“A”

“B”

“C”

1-1/2”

“U”-Bracket (X-High) 1920

Wing2700

J9-16

One Ear-Mini1853

“U”-Bracket1913

Two Piece1863

“L”Bracket2011

Wing2500

Two Piece-Mini1580

1”

2-1/2”

1/2”

1-3/4”

3-7/32”6”

5”

12”

7”

1-3/8”

1”

1-1/4”


Wall BracketsStainless S teel Stampings All Brackets W ith #4 Satin FinishTwo Ear

1759 One Ear1849

Two Ear-Braced4439

One Ear -Mini1859

Two Ear-Urinal1619

“L” Bracket53019

Two Ear2349

One Ear2339

“U” Bracket2369

“H” Bracket2859

TwoPiece1869

Two Piece-Mini1589

One Ear - (X-High)1319

BracedAngle4519

“A”

“B”

“C”Length

J9-17

“U” Bracket1919

InsideBracket1209

Two Ear-Urinal(X-Heavy)4339


Wall BracketsAluminum Extrusions

“A”

“B”

“C”

Lengths

Two Ear2344

One Ear2334

“H” Bracket2858

One Ear1764

Two Ear - Urinal1614

“U” Bracket - (X-Long)2304

“U” Bracket1914

“L” Bracket1864

Two Ear - (X-Long)2264

One Ear - (X-Long)2274

“H” Bracket1734

All Part s “T -6063-T5”Extruded Aluminum With “Clear Anodized”Finish

J9-18

Two Ear1754

“U” Bracket2364

“L” Bracket2684


Surface Mounted Hinges

7719

7978

7073

7113

7011

70437103

8169

7339 7659 7599

8649

J9-19

3-1/4”

1-1/2”

2-29/32”

7053

2”3”

1-1/2”

3-3/8”

7413

3” 1-1/2”

5”

2-13/16”

3-5/8”

8659

5”

2-13/16”3-5/8”

8-1/4”

1-3/4”

2-19/32”

1-1/2”2-13/16”

1-1/2”

2-13/16”


Strike & Keepers

5140Inswing

5280Inswing

5240In or Out

5260Outswing

5230In or Out

5210Outswing

5160Inswing

111770Inswing

5180Inswing

5170Inswing

5798Inswing

5878Outswing

5960In or Out

5980Inswing

5970Outswing

5650Inswing

5640Outswing

“A”

1-1/4”

Square Edge Posts

J9-20

5110Inswing

5340Inswing

5898Outswing

*Overall height - 2-1/2”center to center holespacing - 1-1/2”

* * **

*

*

*

* * * *

1-19/32”2-1/2”

6”

5778Inswing

6”3”

2”

1”

6”3”

6”


J9-27

Wrap Around Gravity Pivot Hinges36103620, 3630,3650, 36603730, 3810,3860, 3930

Square Edge Posts

3700 3763 3960 3793

31103120, 3130,3150, 31603230, 3310,3430, 3530

3200 3263 3460 3293

3550 3540 36904 3720

31904 3220

7813

1-1/2”

“A”

1-1/2”

“A”

PostSize

LocationChromePlatedZamac

Chrome Plated Brass

Polished Brass

Cast S.S. Description

UsePin

UsePintle or Candle

UseCam

“A”Dim

Post Door Pivot Hinge (Roller Bearing Design)


J9-28

Wrap Around Gravity Pivot Hinges

Round Edge Posts

1-1/2”

“A”

1-1/2”

“A”

3510

3010

3900

3060

4533

4043

3420

3910

Flats

3710

3753

3210

3253 37403880, 3940,3970

32403280, 3470,3870

PostSize

LocationChromePlatedZamac

Chrome Plated Brass

Polished Brass


UsePin

UsePintle or Candle

UseCam

“A”Dim

LocationChrome Plated Brass

Polished Brass


UsePin

UsePintle or Candle

UseCam

“A”Dim

ChromePlatedZamac

“A”

1-7/16”

“A”

2-1/4”

“A”

2-1/4”

“A”

2-1/4”

“A”

2-1/4”


Concealed Latches & Knob SetsFor 1” Doors

Door Pulls & Fix-It Kits5440

5400

6020

6200

6419

6251

5080 5090 5190 4230

6080 6090 61904240

8080 8090 8190

6160 6170 111950

8860 111940 6140 6150

6606

J9-29

ChromePlatedZamac

ChromePlatedZamac

ChromePlatedZamac

ChromePlatedZamac

ChromePlatedBrass

Polished Brass

CastStainless Steel

StampedStainless Steel

ChromePlatedZamac

CastStainless Steel

3-11/32”

1-3/4”

2-21/32”

1-3/4”

2-11/16”

1-3/4”

1-3/8”

1-15/32”

2-11/16”

1-3/4”

2-21/32”

1-3/4”

2-11/16”

1-3/4”

Lowstock

1-1/4”

1-3/4”

1-3/4”

2-11/16”

3-3/4”

1-3/4”

2-21/32”

3-3/4”

1-3/4”

2-11/16”

3-3/4”

1-3/4”

1-3/4”

1-3/4”

3-3/4”

1-3/4”

1-5/8”

1-5/8”

2-13/16”

1-5/8”

1-5/8”

1-5/8”

2-9/16”

4-3/4”

4-3/4”

3-7/8”

4-1/16”

5-21/32”5”

3-3/8”

2”


Pilaster Shoes & Anchoring DevicesAll shoes aremade of 22gauge #304stainless steelwith #4 satinfinish

*3” HIGH PILASTER SHOES

4” HIGH ‘OFFSET’PILASTER SHOES

widths measuredat top opening

*Custom sizes available upon request. Open ended available in all sizes.

ANCHOR SHOES

85038508385093 8513

8518385193

3030

3040

6000

*4” HIGH PILASTER SHOES

J9-30


Pilaster Post Anchoring Packs & Devices

J9-31


Door Inserts2380

2560

2540

2390

2740

2730

1530

1540 2400

2760

2750

2490

2810

2420

2430

4800

2450

1680

4550

4540

4636

97295

4090

J9-32

468697280

4646

4060

PostSize Location

Chrome Plated Zamac

BrassPlatedZamac

SatinFinishZamac

Description UsePin

Use PintleorCandle

UseCam

“A”Dim

“B”Dim

PostSize Location

Chrome Plated Zamac

Unplated Zamac

Description UsePin

Use Pintleor Candle

UseCam

2820

4700

“A”

“B”


Alcove Clips & End Plugs

1550

8330

8340

8329

8309

6670 6675 6660 6665

6715 6680 6695 6725 6705

6710 6700 6690

6500

6515

6281 6290

81182

98434

98334

81182

J9-33

8349


Headrail & Headrail Brackets2110

2150

2139

2169 2179

21092129 2579

80022

80032

80042

80052

7359

15772

J9-34

80368

7369


Screw Packs & Fasteners

SCREW PACKS

J9-35


FASTENERSMACHINE SCREWS One Way Round T apping Screws

PHILLIPS TAPPINGSCREWS

10-24 SHOULDER SCREWS

BARREL NUTS

891589258935

8965

96513

96053

96523

96533

SIX LOBE FASTENERS (T-27 HEADS)

10-24BARREL NUTS PAN HEAD TAPPING SCREWS

Without Center Pin

TAPPING SCREWS

8-32 OVAL HEAD(T-20)

10-24SHOULDER SCREWS 10-24

SHOULDER SCREWSWithout Center Pin

All Barrel Nut & ShoulderScrews Have a 1/4” OuterDiameter

J9-36

96533


REPLACEMENT PARTSLISTED BY MANUFACTURER (Available in other materials &finishes)

ACCURATE4260 5430 89820 89830

All AMERICAN

2400

8340

8330

98285

6150

98634

972053660

3160

3010

3510

AMERICAN SANITARY2400

2490

3793

2110

98544

98584

AMPCO2740

2730

3610

3110

4553

4060

J9-37

6140

3293

98175

98245

4043

4540

98195

79787988


REPLACEMENT PARTSLISTED BY MANUFACTURER (Available in other materials &finishes)AMPCO

5980

5970

5580

5570

6690

98584

98589

BOBRICK2150

6069

2820

5210

5340

COLUMBIA5210

5058

3160

7005

TopAssembly Bottom

Assembly

J9-38

98185

98175

98275

6700

6710

98245

2810

6049

3763

99109

3263

3660

6725

6705

5110

89748984


REPLACEMENT PARTSLISTED BY MANUFACTURER (Available in other materials &finishes)COMRES MANUFACTURING

2760

2750

3793

98265

98275

COMTEC / CAPITAL PARTITIONS

3793FIAT

5058

89830

89820

89748984

5160

5170

5340

5230

2150

4280

98175

98195

6190

3630

3130

5190 99574

J9-39

3293

4800

3293

4700

8190

5960


REPLACEMENT PARTSLISTED BY MANUFACTURER (Available in other materials &finishes)FLUSH METAL

GENERAL PARTITION

6150 61401540 2820

4550

6606

982751530

98245

98265

98175

37935510

5570

5960

5180 5170

30103293

4090

53105410 8340 8330

111950

6160

6170

5080 7005

TopAssembly Bottom

Assembly

J9-40

98185

2810

99109

351098584

5580

2150

8080


REPLACEMENT PARTSLISTED BY MANUFACTURER (Available in other materials &finishes)GENERAL PARTITION (continued)

3910

3420

4988

4646

4636

4260

89748984

98245

5110 5230

5960

5210

98175

98614

98584

GLOBAL STEEL

98175

8340

8330

1680

3510

4550

99109

35403010

4090

1550

5080 6140

6150

89830

J9-41

4290

98185

97275

89820

98185


REPLACEMENT PARTSLISTED BY MANUFACTURER (Available in other materials &finishes)

5510

5410GLOBAL STEEL (continued)

5310

4988

5778 5878 79787988

HADRIAN

KNICKERBOCKER

4290

3910 4646

4636

METPAR

6090

5090

4240

2150

7005

TopAssembly Bottom

Assembly

J9-42

3420

6160

111950

5470

617097275

4260

98614

5230

1550


REPLACEMENT PARTSLISTED BY MANUFACTURER (Available in other materials &finishes)METPAR (continued)

5778 5878MILLS

5550

5058

4230

5140

98185

98275

98265

99109

98584

5310

3930 4533

3430 40432730

2750

4060

5058

552089748984

5340

5330

7005

TopAssembly Bottom

Assembly

7005

TopAssembly Bottom

Assembly

J9-43

2740 2760

4540

5410

4260


REPLACEMENT PARTSLISTED BY MANUFACTURER (Available in other materials &finishes)SANTANA / HINY HIDERS

5058

89748984

6309

SANYMETAL

6540

79787988

3960

3460

51805130 5510

3900

3060

98175

2450

8860

4686

98715

SHANAHAN

98175

98195

98544

3150

24305180

7005

TopAssembly Bottom

Assembly

J9-44

4280

5170

97280

97295

2420

3650

6695

5170


J9-45

Hooks, Door S tops & Latches4000

4020

4280

4260

65196529

4120 4129 41514290

5020 50306540

6409

6309

5050 50606983

6539

4988 5058 8698 5151

6069

5701

6049

1-1/8”

3”

3-1/2”1-1/8”

2-1/8”

1-19/32”

2-1/16”

1-3/16”

3”

2-5/16”

1-5/8”

3/4” 3/4”

4009

3-1/16”2-3/4”

2-3/4” 2-3/4” 2-5/8”

1-7/8”1-7/8”

3-1/2”2-3/4”

1-3/4”

13/16”

2”

3-1/2” 3-1/2”2-3/4” 3-1/2”


J9-46

Cams, Pintles & Hinge Pins

98185 98195 9828598275 98245

8982089830

9817598265

97275

9171591719 98614

9858498589

9863499585

99574 99109

9911998544

97435 97245

97265

7005

TopAssembly

BottomAssembly

97055 97035

97065 x 497015

97045 9702599615 99625

99645

7740

7740

99635


NEW ITEMS

J9-47

New Products

8698

SLIDE LATCHSatin Finish Cast Zamac Design2-3/4” center-to-center holes

6983

SLIDE LATCH Heavy Duty Cast S tainless Steel Design

HINGED BRACKETCan be rot ated for any angle application111359 1” Hinged W all Bracket111359 1-1/4” Hinged W all Bracket SPRING LOADED SURFACE HINGE

Heavy duty st ainless steel tension adjust-able8643 4” high - polished8649 4” high - satin8653 5” high - polished8659 5” high - satin

Documents

Construction Styles of Toilet Compartments I N D U S T …blainedistribution.com/wp-content/uploads/PDF/Toilet...Standard hardware is chrome plated institutional quality. Stainless