33

CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 2: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,

CONSTRUCTION FEATURES

1Carbon steel frames with 4-sided welds.

2Fully welded frames are hand filed and polished.

3Heavy guage steel mesh is used for seats, backs and table tops.

4Frames go through an extensive pre-treatment process and thorough

cleaning to insure good adhesion of the finish.

5Frames are fully dipped and a EDP undercoating process

inhibits rust and corrosion.

6Finishes are electrostatically applied power-coat using the

highest grade polyester powder which is fade and scratch resistant.

All Meridian products carry a commercial warranty that is fully supported by our Service Team.

Meridian steel mesh outdoor furniture is strong and durableand never goes out of style. It’s easy to maintain, cool to sit on and blends well into any setting.

STEEL MESH FURNITURE

Page 3: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,

Stock: Anthracite

P-FL-204Florence Chair

P-MT-103Metro Chair

P-CB-101Cambridge Chair

Cambridge

w w w . m e r i d i a n f u r n i t u r e c o m p a n y . c o m

Dining Chair Collection

CW CW

Page 4: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,

w w w . m e r i d i a n f u r n i t u r e c o m p a n y . c o m

Table Collection

P-MT-30 30” Bistro Table

P-MT-30S 30” Square Dining Table P-MT-72 72 x 42” Oval Dining Table

P-MT-48 48” Round Dining Table

P-MT-76 76 x 42” Rectangular Dining Table

CW CW

CW

P-MT-3636 36” Square Dining Table CW

P-MT-3048 30 x 48” Rectangular Dining Table CW

CW

CW

P-MT-87 87 x 43” Rectangular Dining Table CW

Page 5: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 6: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 7: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 8: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 9: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 10: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 11: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 12: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 13: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 14: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 15: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 16: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 17: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 18: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 19: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 20: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 21: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 22: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 23: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,

FLOrIDA MEShMETAl | AlUMINUM

CafÉ Chair

2F320

H: 33” W: 23” D: 25.5”Seat Ht: 18” Arm Ht: 25.5”(Stackable: 4-6)

high baCk dining Chair

2F370

H: 33” W: 23” D: 25.5”Seat Ht: 18” Arm Ht: 25.5”

m m

high baCk swivel roCker

2F900

H: 40” W: 24.5” D: 29”Seat Ht: 16.5” Arm Ht: 24.75”

m

high baCk loveseat glider

2F440

H: 38” W: 44.5” D: 29”Seat Ht: 18” Arm Ht: 25.5”

swivel balCony stool

2F580

H: 35” W: 26” D: 26”Seat Ht: 21” Arm Ht: 26.5”

m m

swivel bar stool

2F480

H: 44” W: 26” D: 26”Seat Ht: 29” Arm Ht: 35.5”

m

bar stool

2F240

H: 45” W: 23” D: 26”Seat Ht: 29” Arm Ht: 35.5”

adjustable Chaise

29400

H: N/A W: 28.5” L: 77”Seat Ht: 14.5” Arm Ht: N/A(Stackable: 4-6)

m m m

Available in: mesh m

ottoman

2F120

H: 16.5” W: 23” D: 23”Seat Ht: N/A Arm Ht: N/A

niCkel CognaC sedona hiCkory flagstone flint onyx titanium white Charisma Cobalt fern tangerine

AvAIlAblE FrAME FINISHESShown in Photo: Mesh Seating Option | Hickory Frame Finish

aDjustaBle chaise | 29400

18” square pillow | 00020 | COM

C O A S T A LFAVORITE

C O A S T A LFAVORITE

C O A S T A LFAVORITE

C O A S T A LFAVORITE

Page 24: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,

LATTE

side Chair

90592-SL 90592-PD

H: 32” W: 20.5” D: 20”Seat Ht: 18” Arm Ht: N/A(Stackable: 4-6)

swivel balCony stool

93252-SL 93252-PD

H: 39” W: 20.5” D: 20”Seat Ht: 24” Arm Ht: N/A

sl C

bar stool

90252-SL 90252-PD

H: 44” W: 19.5” D: 21”Seat Ht: 29” Arm Ht: N/A

swivel bar stool

91252-SL 91252-PD

H: 44” W: 19.5” D: 21”Seat Ht: 29” Arm Ht: N/A

slotted seat

The Slotted Seat is available for all Latte chairs and must be specified when ordering.

Padded seat

The Padded Seat is available for all Latte chairs and must be specified when ordering.

sl C

sl C sl C

Available in: slotted seat Padded seatCsl

niCkel CognaC sedona hiCkory flagstone flint onyx titanium white

Charisma Cobalt fern tangerine

AvAIlAblE FrAME FINISHES

Shown in Photo: Slotted Seating Option | Flint Frame Finish

siDe chair | 90592-SL

36” emBosseD cafÉ taBle | 19362

Page 25: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 26: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,
Page 27: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,

MANhATTANMETAl | STEEl

side Chair

CH590-CH CH590-PD

H: 35” W: 18.5” D: 21”Seat Ht: 18.75” Arm Ht: N/A(Stackable: 4-6)

CafÉ Chair

CH320-CH CH320-PD

H: 35” W: 20” D: 21”Seat Ht: 18.75” Arm Ht: 25.75”(Stackable: 4-6)

Ch C

bar stool

CH240-CH CH240-PD

H: 45.5” W: 18.5” D: 20.5”Seat Ht: 29” Arm Ht: N/A

CheCkered seat

The Checkered Seat is available for all Manhattan chairs and must be specified when ordering.

Padded seat

The Padded Seat is available for all Manhattan chairs and must be specified when ordering.

Ch C

Ch C

Available in: Checkered seat Padded seatCCh

niCkel CognaC sedona hiCkory flagstone flint onyx titanium white

Charisma Cobalt fern tangerine

AvAIlAblE FrAME FINISHES

Shown in Photo: Padded Seating Option | Titanium Frame Finish

Bar stool | CH590-PD | Sierra Lemongrass

36” emBosseD Bar taBle | 09115

Page 28: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,

wyNNMETAl | STEEl

CafÉ Chair

CM590

H: 32.5” W: 23.5” D: 21.5”Seat Ht: N/A Arm Ht: N/A(Stackable: 4-6)

sl

balCony stool

CM240

H: 37” W: 24” D: 22”Seat Ht: N/A Arm Ht: N/A

sl

bar stool

CM250

H: 44.5” W: 25” D: 22”Seat Ht: N/A Arm Ht: N/A

sl

Available in: slotted seat sl

niCkel CognaC sedona hiCkory flagstone flint onyx titanium white

Charisma Cobalt fern tangerine

AvAIlAblE FrAME FINISHES

Shown in Photo: Slotted Seating Option | Onyx Frame Finish

cafÉ chair | CM590

36” emBosseD cafÉ taBle | 19215

Page 29: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,

CafÉ Chair

2G320

H: 34.5” W: 23” D: 25”Seat Ht: 18” Arm Ht: 25.5”(Stackable: 4-6)

bar stool

2G240

H: 48.25” W: 23” D: 26.5”Seat Ht: 31” Arm Ht: 38.5”

m m

adjustable Chaise

2G400

H: 37” W: 27” L: 78”Seat Ht: 14” Arm Ht: 22.5”(Stackable: 4-6)

m

niCkel CognaC sedona hiCkory flagstone flint onyx titanium

white Charisma Cobalt fern tangerine

AvAIlAblE FrAME FINISHES

Shown in Photo: Mesh Seating Option | N/A Frame Finish

Bar stool | 2G240

36” emBosseD Bar taBle | 09115

Page 30: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,

Shown in Photo: Wynn Collection | Page 66Slat Seating Option | Onyx Frame Finish

cafÉ chair | CM590

36” emBosseD cafÉ taBle | 19215

Page 31: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,

EMBOSSED AlUMINUM

SqUArE coMplETE TAblESModel #’s include both the top and base.

24” CafÉ table

19203

Steel Base

H: 29”

24” bar table

09203

Steel Base

H: 40”

30” CafÉ table

19211

Steel Base

H: 29”

30” bar table

09211

Steel Base

H: 40”

36” CafÉ table

19115 (with Hole)

Steel Base

H: 29”

36” bar table

09115 (with Hole)

Steel Base

H: 40”

30” CafÉ table

19111 (with Hole)

Steel Base

H: 29”

30” bar table

09111 (with Hole)

Steel Base

H: 40”

36” CafÉ table

19215

Steel Base

H: 29”

36” bar table

09215

Steel Base

H: 40”

roUND coMplETE TAblESModel #’s include both the top and base.

30” CafÉ table

19302

Steel Base

H: 29”

30” bar table

09302

Steel Base

H: 40”

30” CafÉ table

19303 (with Hole)

Steel Base

H: 29”

30” bar table

09303 (with Hole)

Steel Base

H: 40”

36” CafÉ table

19362

Steel Base

H: 29”

36” bar table

09362

Steel Base

H: 40”

36” CafÉ table

19363 (with Hole)

Steel Base

H: 29”

36” bar table

09363 (with Hole)

Steel Base

H: 40”

Page 32: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,

Shown in Photo:

36” mesh cafÉ taBle | 16365

Page 33: CONSTRUCTION FEATURES...CONSTRUCTION FEATURES 1 Carbon steel frames with 4-sided welds. 2 Fully welded frames are hand filed and polished. 3 Heavy guage steel mesh is used for seats,

MESh AlUMINUM

side table /ottoman

2F120

H: 16.5”

30” CafÉ table

2G306 (with Hole)

Aluminum Base

H: 29”

30” CafÉ table

16305 (with Hole)

Steel Base

H: 29”

36” CafÉ table

16365 (with Hole)

Steel Base

H: 29”

SqUArE coMplETE TAblESModel #’s include both the top and base.

roUND coMplETE TAblESModel #’s include both the top and base.

36” bar table

06365 (with Hole)

Steel Base

H: 40”