Constr Catalog Web

7/27/2019 Constr Catalog Web

1/31

Elco Const ruct ion Product sQuality Fasteners for the Construction Industry

www.elcoconstruction.com

Product Cat alog

Fastener Sealing System

Drill Screws


2/31

Twelv

eWarehouseLocationsToS

erveYouBetter


3/31

3

Design & Application Assistance

Our application specialists can analyze your productdesigns and assist with optimal fastener selection.

They can also offer design and material options.

Installat ion Analysis

Our commitment to you continues during andafter construction. If a problem should arise, ourapplications specialists are available to investigateand determine the cause.

Pricing, Availability and Ordering Information

With only a few exceptions, all the items in thiscatalog are considered stock items. As such, theyare usually available for shipment within 24 hours.Many parts are also stocked at various strategiclocations around the United States to increase theiaccessibility.

For price and specific product availability, or toplace an order, simply call 1-800-435-7213 and askfor customer service. Elco Construction Productsonly sells to authorized distributors.

Ordering Non-Stock Standard Parts

We recognize that all applications are uniqueand may require fastening solutions that are notconsidered standard. Specials are considered anintegral part of what we offer to the marketplace.Because we offer such extensive manufacturingcapabilities, we can customize a fastener to meet

the specific needs of your application. A wide rangeof sizes, materials, drive styles, head styles andmore are possible. Please contact a CustomerService Representative for assistance.

Special Services

Head Painting: Virtually any color can be matched,using the highest quality paint available tomaximize adhesion and minimize chipping.

Packaging: In addition to the standard packagingindicated in this catalog, alternative packaging

options are available ranging from bulk shipmentsin tubs to small-count poly bag packs.

To find the latest catalog information, learn aboutour custom capabilities and services, or find designand other technical data. log ontowww.elcoconstruction.com.

A Commitment to theConstruction Industry

Elco Construction Productsprovides a broad range ofquality fasteners and value-added services designed

to speed construction,improve building integrity and ensure performanceunder demanding conditions.

Dril-Flexstructural drill screws that are virtuallyimmune to embrittlement failure

Bi-Flex 300 series (18-8) stainless steel self-drilling screws

Dril l t i teprecision milled drill screws for greatersharpness

Drilitscrews with forged self-drilling points in avariety of styles

30 0 series stainless steel screws, in self-tappingand self-drilling styles

UltraConmasonry fasteners now available inblue, silver, white or bronze Stalgard finish in3/16," 1/ 4" and 5/16" diameters

ConFlexlarge diameter masonry fasteners

Aggre-gator300 series (18-8) stainless steelbi-metal concrete anchors

New sizes and styles ofHangerMatethreadedrod anchoring system

Fab-Lokclamping fasteners, now available in aheavy-duty (HD) design

In addition, many of the products shown in thiscatalog can be customized to meet the needs ofyour application.

We have attempted to make this catalog ascomplete and accurate as possible, but changesare inevitable. More part numbers and productlines will be added on a regular basis. Visit ourwebsite for the most up-to-date literature.

New Product DevelopmentOur close relationship with the constructionindustry has led to many innovative productscustomized for specific applications. Ourapplication engineers can work directly with you tofind solutions for your particular need.

Quality Products from Elco Construction Products


4/31

Need theLatest

Product InfoDeliveredInstantly?

go to


Downloadable informationincludes:

Product overviews

Specifications

Performance Data

Installation instructions

Catalog updates

Approvals such asMiami-Dade NOA,UL Listings andFM Approvals

It

sabout

time!


5/31

5

Table of Contents

Standard Drill Screws ................................................... 7

DrilitDrill Screws with Bonded Sealing Washers ........... 9

DrilitDrill Screws for Wood-to-Metal Applications ........ 10

Drill Screws with Extended Drilling Capacity ................. 11

Flo-SealDrill Screws with Integral Sealing Washers ..... 12

TapfastFasteners ..................................................... 13

Architectural Roof Clip Fasteners ................................. 14

Dril-FlexStructural Drill Screws .................................. 15

Bi-Flex Stainless Steel Self-Drilling Screws ................. 16

302 (18-8) Stainless Steel Drill Screws ....................... 17

304 Stainless Steel Self-Tapping Screws ..................... 18

Fab-LokFasteners .................................................... 19

UltraConMasonry Fasteners ..................................... 20

Crete-FlexSS4 Masonry Fasteners ............................ 23

Con-FlexLarge Diameter Masonry Fasteners .............. 24

Aggre-GatorBi-Metal Concrete Anchors ...................... 25

HangerMateThreaded Rod Anchoring System ............ 26

PanelMateStorm Panel Anchors ................................ 28

RapidSetTools ......................................................... 30


6/31

7For product or ordering information, call 1.800.435.7213 (USA and Canada)

Drilit Standard Drill ScrewsSelf-drilling fasteners in the most popular sizes

Self-drilling fasteners eliminate separate drilling and tapping operations forfaster, more economical installations.

SpecificationsDiameters: #8 to 5/16"

Lengths: 1/ 2" to 4"

Head Styles: Hex washer, slottedhex washer, pan and oval

Drive Systems: Hex and phillips

Material: Carbon steel

Finishes: Stalgardcoating or zincplating

Features & BenefitsEliminates separate drilling andtapping operations

Broad selection of sizes

Fasteners coated with Stalgardfinish typically show no red rust orother base metal corrosion onsignificant surfaces even after800 hours of 5%neutral salt sprayexposure (per ASTM B117)

Cat alog No. Descript ion Point Type Finish Cart on Quant it y Weight / Cart on

#8 Diameter, Hex Washer Head

EDA235 8-18 x 1/ 2 #2 zinc 10,000 35

EDA236 8-18 x 1/2 #2 Stalgard 10,000 35

EDA261 8-18 x 3/4 #3 Stalgard 10,000 41

EDA286 8-18 x 1 #2 Stalgard 5,000 27

#8 Diameter, Phillips Pan Head

EDD251 8-18 x 1/2 #2 Stalgard 10,000 34

EDD266 8-18 x 3/4 #2 Stalgard 10,000 42

EDD291 8-18 x 1 #2 Stalgard 8,000 43


EDB401 10-16 x 1/2 #3 Stalgard 8,000 41

EDB426 10-16 x 5/ 8 #3 Stalgard 6,000 43

EDB446 10-16 x 3/4 #3 Stalgard 6,000 38

EDC450 10-16 x 3/4 #1 zinc 5,000 32

EFB463 10-16 x 3/4 #3 zinc 6,000 38

EFB464 10-16 x 3/4 #3 Stalgard 6,000 38

EDB486 10-16 x 1 #3 Stalgard 5,000 37

EFB550 10-16 x 1-1/ 2 #3 Stalgard 3,000 30

EDB541 10-16 x 1-1/ 2 #3 Stalgard 3,000 30

EDB571 10-16 x 2 #3 Stalgard 2,000 25


EDC745 12-14 x 3/4 #1 stitch zinc 5,000 38

EDB741 12-14 x 3/4 #3 Stalgard 5,000 44

EDB761 12-14 x 1 #3 Stalgard 4,000 37

EDB782 12-14 x 1-1/4 #3 Stalgard 3,000 36

EDB801 12-14 x 1-1/2 #3 Stalgard 2,500 35

EDB821 12-14 x 2 #3 Stalgard 2,000 34

EDB830 12-14 x 2 1/2 #3 Stalgard 1,500 29EDB840 12-14 x 3 #3 Stalgard 1,000 24

EDB845 12-14 X 4 #3 Stalgard 500 15


7/31

8 For product or ordering information, call 1.800.435.7213 (USA and Canada)

Drilit Standard Drill ScrewsSelf-drilling fasteners in the most popular sizes


1/ 4" Diameter, Hex Washer Head

EDB936 1/4-14 x 3/4 #3 Stalgard 3,500 46

EDC930 1/4-14 x 7/ 8 #1 Stitch Stalgard 4,000 38

EDB946 1/4-14 x 1 #3 Stalgard 3,000 45

EDB956 1/4-14 x 1-1/4 #3 Stalgard 2,000 35EDB961 1/4-14 x 1-1/ 2 #3 Stalgard 2,000 39

EDB971 1/4-14 x 2 #3 Stalgard 1,500 36

EDB976 1/4-14 x 2 1/2 #3 Stalgard 1,000 30

EDB981 1/4-14 x 3 #3 Stalgard 800 28

EDB983 1/4-14 x 4 #3 Stalgard 500 28

EDB984 1/4-20 x 1 #3 Stalgard 2,500 45


EDB991 5/16-18 x 1 #3 Stalgard 1000 30

EDB994 5/16-18 x 1-1/4 #3 Stalgard 1000 34

EDB998 5/16-18 x 1-1/2 #3 Stalgard 1000 38

Drill Point Type Selection Guide

Standard SheetM et al Sizes Nominal Screw Sizes

Thread Dia. Decimal

#6 .140

#7 .150

#8 .160

#9 .180

#10 .190

#11 .200

#12 .210

1/ 4 .240

#14 .250

Gage Decimal

26 0.018

24 0.024

22 0.030

20 0.038

18 0.048

16 0.060

14 0.075

12 0.106

1

#12 1/ 4" #12 1/ 4" #12 1/ 4" #12 1/ 4" #12 1/ 4"#10 #10#12

Point Type

Diameter

54 4.532

.500"

.100"

.200"

.300"

.400"

.000"

.062"

.210"

.312"

.375"

.110"

.150"

.175"


8/31


Drilit Drill Screws with Bonded Sealing WashersEconomical fasteners for applications requiring a weather-tight seal

This economical line of drill screws provides a weather-tight seal forprotection against the elements.

SpecificationsDiameters: #10 to 1/ 4"


Head Styles: Hex washer

Drive System: Hex

Point Types: #1 (stitch) and #3


Finish: Stalgard coating

Features & BenefitsEPDM washer material is UV-and heat-resistant for long-term

protection against leakageStalgard coating provides 800hours of salt spray resistance(per ASTM B117)

Cat alog No. Descript ion Point Type M at erial Finish Cart on Quant it y Weight / Cart on


EFW525 10-16 x 3/4 #3 carbon steel zinc 4,000 21

EFW555 10-16 x 1-1/ 2 #3 carbon steel Stalgard 2,000 21EHL111 10-16 x 3/4 #3 carbon steel Stalgard 3,000 21

EHL146 10-16 x 1-1/ 2 #3 carbon steel Stalgard 2,000 21


EHL165 12-14 x 3/4 #3 carbon steel Stalgard 3,000 24

EHL181 12-14 x 1 #3 carbon steel Stalgard 1,500 26

EHL235 12-14 x 1-1/4 #3 carbon steel Stalgard 2,000 23


EHL280 12-14 x 2 #3 carbon steel Stalgard 1,500 27


EHL295 12-14 x 3 #3 carbon steel Stalgard 500 13

EHL310 12-14 x 4 #3 carbon steel Stalgard 500 14


EHL515 1/4-14 x 3/4 #3 carbon steel Stalgard 2,500 36

EHK315 1/4-14 x 7/ 8 #1 stitch carbon steel Stalgard 2,500 31

EHL530 1/4-14 x 1 #3 carbon steel Stalgard 2,000 37

EHL556 1/4-14 x 1-1/4 #3 carbon steel Stalgard 1,500 28

EHL577 1/4-14 x 1-1/2 #3 carbon steel Stalgard 1,500 30

EHL585 1/4-14 x 2 #3 carbon steel Stalgard 1,000 26

EHL595 1/4-14 x 2-1/ 2 #3 carbon steel Stalgard 1,000 30

EHL600 1/4-14 x 3 #3 carbon steel Stalgard 500 18

EHL610 1/4-14 x 4 #3 carbon steel Stalgard 500 22


9/31


Drilit Drill Screws for Wood-to-Metal ApplicationsFor efficient fastening of wood or composite materials to steel

These self-drilling fasteners are designed to eliminate separate drilling andtapping operations for faster installation in wood-to-metal applications.

SpecificationsDiameters: #8 to 1/4"

Lengths: 3/4" to 3-15/16"

Head Styles: Flat and wafer

Drive System: Phillips

Point Styles: Types 3 and 4


Finishes: Gray Stalgardcoating orphosphate

Features & BenefitsEliminates costly pre-drilling of wood

Broad selection of sizes

Can be used with steel up to5/16" thick

Gray Stalgard coating provides 1000hours of salt spray resistance and wasdeveloped for use with ACQ treatedlumber with retention levels no higherthan .25 PCF

Cat alog No. Desc ript ion Drive Point Type Finish Quant it y/ Shipper

# 8 Diameter; Flat Head

EDK300 8-18 x 1-15/16" #2 Phillips #3 w/ Pilot Phosphate 4000

# 10 Diameter; Wafer Head

EDM582 10-24 x 3/4" #2 Phillips #3 Gray Stalgard 8000

EDM592 10-24 x 1" #2 Phillips #3 Gray Stalgard 6000

EDM607 10-24 x 1-1/4" #2 Phillips #3 Gray Stalgard 5000

EDT602 10-24 x 1-7/16" #2 Phillips #3 w/ Wings Gray Stalgard 4000









# 12 Diameter; Flat Head



EDJ867 12-14 x 3-5/ 8" #3 Phillips #2 w/ Pilot Gray Stalgard 1000

1/ 4" Diameter ; Flat Head

EDT442 1/4-20 x 3" #3 Phillips #4 w/ Wings Gray Stalgard 1000


10/31

1 1For product or ordering information, call 1.800.435.7213 (USA and Canada)

Drill Screws with Extended Drilling CapacitySpecially-designed drill points handle the toughest applications

This line of heavy-duty drill screws is designed for steel applications up to1/ 2" thick.

SpecificationsDiameters: #12 and 1/4"

Lengths: 7/8" to 8"

Head Style: Hex washer

Drive System: Hex


Finish: Silver Stalgard coating

Features & Benefits

Several parts available withbonded sealing washer

Points are either Dril-it forged orDrilltite precision milled points

Stalgard coating provides 800hours of salt spray resistance (perASTM B117)

Drilit Drill Screws

Cat alog No. Descript ion Point Type

M ax. Dri l l

Capacit y Finish

Carton

Quantity

Weight/

Carton

#1 2 Diameter; Decking Fasteners and Dri l l Screws for Steel Thicknesses of .175" to .5 00"

EDC801 12-24 x 7/ 8 #4 .312 Stalgard 4,500 43EHL351 12-24 x 7/ 8 w/ Bonded #4 .312 Stalgard 4,500 44

EDC816 12-24 x 1-1/4 #4.5 .375 Stalgard 3,500 44

EHL371 12-24 x 1-1/4 w/ Bonded #4.5 .375 Stalgard 3,500 45

EDC836 12-24 x 1-1/4 #5 .500 Stalgard 4,000 49

EHL411 12-24 x 1-1/4 w/ Bonded #5 .500 Stalgard 2,500 36

EDC846 12-24 x 1-1/2 #4.5 .375 Stalgard 2,500 33

EHL431 12-24 x 1-1/ 2 w/ Bonded #4.5 .375 Stalgard 2,500 34

EDC861 12-24 x 1 1/ 2 #5 .500 Stalgard 2,500 36

EHL446 12-24 x 1-1/ 2 w/ Bonded #5 .500 Stalgard 2,000 37

EDC881 12-24 x 2 #5 .500 Stalgard 2,000 30

EHL466 12-24 x 2 w/ Bonded #5 .500 Stalgard 1,500 28

EDC901 12-24 x 3 #5 .500 Stalgard 1,000 25EHL486 12-24 x 3 w/ Bonded #5 .500 Stalgard 1,000 26

#1 / 4 Diameter Decking Fasteners for Thick nesses of .175" t o .500"

EFC886 1/4-14 x 5 #5 .500 Stalgard 500 26

EFC896 1/4-14 x 6 #5 .500 Stalgard 500 30

EFC926 1/4-14 x 8 #5 .500 Stalgard 300 24

Dril l t i te Precision M il led Dri l l Screws

Cat alog No. Descript ion Point Type FinishCarton

QuantityWeight/Carton

#1 2 Diameter; Decking Fasteners and Dri l l Screws for Steel Thicknesses of .175" to .5 00"

ECC720 12-24 x 1-1/4 #5 Drilltite .500 Stalgard 4,000 49

ECW725 12-24 x 1-1/4 w/ Bonded #5 Drilltite .500 Stalgard 2,500 36ECC740 12-24 x 1-1/2 #5 Drilltite .500 Stalgard 2,500 36

ECW745 12-24 x 1-1/ 2 w/ Bonded #5 Drilltite .500 Stalgard 2,000 37

ECC750 12-24 x 2 #5 Drilltite .500 Stalgard 2,000 28

ECW755 12-24 x 2 w/ Bonded #5 Drilltite .500 Stalgard 1,500 25

ECC770 12-24 x 3 #5 Drilltite .500 Stalgard 1,000 25

ECW775 12-24 x 3 w/ Bonded #5 Drilltite .500 Stalgard 1,000 26


11/31

1 2 For product or ordering information, call 1.800.435.7213 (USA and Canada)

Flo-Seal Drill Screws w it h Int egral Sealing WashersFor self-drilling applications requiring a weather-tight seal

Special underhead design and EPDM sealing washer combine to providea custom, weather-tight seal.


Lengths: 3/4" to 2"

Head Style: Hex washer(5/16" across flats)

Drive System: Hex



Features & BenefitsEPDM washer is UV- and heat-resistant for long-term protection

against leakageReliable and consistent sealing evenin under-tightened, over-tightened, orangle-driven installations

Stalgard coating provides800 hours of salt spray resistance(per ASTM B117)

Cat alog No. Descript ion Hex Drive Size Point Type Finish Cart on Quant it y Weight / Cart on

# 10 Diamet er with Flo-Seal Hex Washer Head

EHB105 10-16 x 3/4 5/16 AF #2 Stalgard 4,000 40

EHB135 10-16 x 1-1/ 2 5/16 AF #2 Stalgard 2,000 20

# 12 Diameter wit h Flo-Seal Hex Washer Head

EHB150 12-14 x 3/4 5/16 AF #2 Stalgard 3,000 33

EHB180 12-14 x 1 5/16 AF #2 Stalgard 2,500 32

EHB235 12-14 x 1-1/4 5/16 AF #2 Stalgard 2,000 30

EHB295 12-14 x 1-1/ 2 5/16 AF #2 Stalgard 2,000 33

1/ 4" Diamet er with Flo-Seal Hex Washer Head

EHB515 1/4-14 x 7/ 8 5/16 AF #1 Stalgard 2,500 31

Features and Benefi t s of t he Flo-Seal Fast ener Sealing SystemFastener head engineered to control the flow ofthe special sealing washer, ensuring sealing incritical areas

Provides reliable and consistent sealing even inunder-tightened, over-tightened or angle-driveninstallations

Ensures long-term protection against leakage

Compensates for different installation situationsand techniques

Drill Screw wit h Flo-Seal System

Type #1 #3drill point

Flo-Sealsealingsystem with 9/16"O.D. EPDM one-pieceintegral washer


12/31


Features and Benefits of the Flo-Seal Fastener Sealing SystemFastener head engineered to control the flow ofthe special sealing washer, ensuring sealing incritical areas

Provides reliable and consistent sealing even inunder-tightened, over-tightened or angle-driveninstallations

Ensures long-term protection against leakage

Compensates for different installation situationsand techniques

TapFast FastenersFor use in metal-to-wood applications

High-performance fastener designed specifically for attaching for attachinglight-gage metal panels (18 ga. max.) to wood frame structures. UniqueFlo-Seal washer design provides enhanced sealing capabilities.

SpecificationsSize: #10

Lengths: 1" to 3"Head Style: 1/ 4" hex

Drive System: Hex

Point: Formed Type S cutting point



Features & BenefitsIncorporates Flo-Seal sealing washer

for a water-tight sealLarge diameter increases performance

Easily penetrates multiple panelthicknesses

Stalgard coating provides800 hours of salt spray resistance(per ASTM B117)

Cat alog No. Descript ion Point Finish Cart on Quant it y Weight / Cart on

#10 Diameter Fastener with Flo-Seal Hex Washer Head

EHH210 10-12 x 1" modified S point Stalgard 3,000 26

EHH230 10-12 x 1-1/ 2" modified S point Stalgard 2,500 28

EHH250 10-12 x 2" modified S point Stalgard 1,500 20

EHH265 10-12 x 2-1/2" modified S point Stalgard 1,000 17

EHH280 10-12 x 3" modified S point Stalgard 800 16

Flo-Sealsealing systemwith 9/ 16" O.D. EPDMone-piece integral washer

modified S point

TapFastFastener with Flo-Seal System


13/31


Cat alog No. Descript ion Drive Syst em Head St yle Point Type Finish Cart on Quant it y

For Steel

EDO450 10-16 x 1" #2 Phillips Pancake #3 Silver Stalgard 5000EDO460 10-16 x 1-1/ 2" #2 Phillips Pancake #3 Silver Stalgard 3500

EDO470 10-16 x 2" #2 Phillips Pancake #3 Silver Stalgard 2500

EDO735 12-14 x 1" #2 Phillips Pancake #3 Silver Stalgard 4000

For Wood/ Thin Steel

ETA850 10-12 x 1" #2 Phillips Pancake Type S Gray Stalgard 5000

ETA855 10-12 x 1-1/ 2" #2 Phillips Pancake Type S Gray Stalgard 3500



Archit ect ural Roof Clip Fast enersLow-profile head design for wood and steel applications

The efficiency of self-drilling fasteners and the aethestics of an inobtrusivehead are ideal for attaching metal roof clips.

SpecificationsDiameters: #10 to #12"

Lengths: 1" to 2"

Head Styles: Pancake

Drive Systems: Phillips

Material: Carbon Steel

Finishes: Silver or Gray StalgardCoating

Features & BenefitsEliminates separate drilling andtapping operations

Pancake head improves aesthetics

Stalgard corrosion-resistantcoating provides 800 hours of saltspray resistance (per ASTM B117)

See page 26 ofthis catalog formore details.

Now Re-engineered To Simplify Installation!

One drive socket for all sizes in steel or woodapplications (except HangerMateLG)

One ASNI-standard drill bit size and one drive sleeve

for concrete applications Socket and sleeve fit contractor-grade tools

Heads precision drilled and tapped to accept 3/ 8-16or 1/ 4-20 threaded components

Different thread and point styles available to meet theneeds of steel, concrete or wood

Many styles FM approved and/or UL listed


14/31


Dril-Flex Struct ural Drill ScrewsFor use in structural applications

Precision-engineered and dual heat treated drill screws provide the strength,ductility and resistance to embrittlement needed for critical applications.

Specifications

Diameters: #10 to 5/16"

Lengths: 3/4" to 3-3/ 8"

Head Styles: Hex washer andundercut flat


Point Types: #3 and #4

Material: Alloy steel


Head Marking: Elco logo in araised circle

Features & Benefits

High-hardness points and leadthreads for drilling and tapping

Lower-hardness in load-bearingthreads for ductility

Virtually immune to delayedembrittlement failures

Stalgard coating provides 800hours of salt spray resistance(per ASTM B117)

Cat alog No. Descript ion Drive Syst em Head St yle Point St yle Finish Cart on Quant it y

#1 0 Diameter

EAF430 10-16 x 3/4" 5/16" hex hex washer #3 Stalgard 6000EBL530 10-24 x 1-1/4" #2 phillips wafer #3 Stalgard 5000

#1 2 Diameter

EAF621 12-14 x 7/ 8" 5/16" hex hex washer #3 Stalgard 5000

EAF641 12-14 x 1" 5/16" hex hex washer #3 Stalgard 4000

EAF681 12-14 x 1-1/2" 5/16" hex hex washer #3 Stalgard 2500

EAF690 12-14 x 2" 5/16" hex hex washer #3 Stalgard 2000

EBL215 12-14 x 1" #3 phillips undercut flat #3 Stalgard 4000

EAF755 12-24 x 1-3/4" 5/16" hex hex washer #5 Stalgard 2500

1/ 4" D iameter

EAF816 1/4-14 x 1" 3/ 8" hex hex washer #3 Stalgard 3000

EAF841 1/4-14 x 1-1/ 2" 3/ 8" hex hex washer #3 Stalgard 2000





EAF888 1/ 4-20 x 1 3/ 4" 3/ 8" hex hex washer #5 Stalgard 1000

EAF890 1/4-20 x 2-1/2" 3/ 8" hex hex washer #4 Stalgard 1000

5/ 16" D iameter




15/31


Bi-Flex 300 Series St ainless St eel Bi-M et al Self-Drilling ScrewsBi-metal technology provides outstanding corrosion resistance and long service life

Bi-Flex fasteners provide the corrosion resistance of 300 series stainlesssteel and the efficiency of drillscrews.


Lengths: 3/4" to 2-1/ 2"

Head Styles: Hex washer, flat andundercut flat


Point Types: #2, #3 and #5

Material: Hardened steel tappingthreads and point fused onto an18-8 stainless steel shank andhead

Finish: Silver StalgardGB(Galvanic Barrier) coating

Features & BenefitsHigh strength, ductility andreliability

Virtually immune to delayedembrittlement failures

Greater galvanic compatibility indissimilar metal applicationsinvolving aluminum

Quickly drill and tap into steel oraluminum up to 1/ 2" thick

High in-place value over the life ofstructures, components andsystems

Standard packaging: keg quantities as shown.

Job Pack : Pieces per box as shown/six boxes per shipper. Available upon request. Indicate Job Pack by placing a P at the end of the ECPCatalog No.

CatalogNo. Size Lengt h Drive Syst em Point Size

Max.Drilling Cap.

Piecesper 1/ 4 Keg

Job Pack:Pieces per Box

Hex Washer Head

EAJ110 10-16 3/ 4" 5/ 16" hex 2 .110" 6000 250

EAJ185 12-14 1" 5/ 16" hex 2 .140" 4000 150

EAJ215 12-14 1-1/ 2" 5/ 16" hex 2 .140" 2500 125

EAJ240 12-14 2" 5/ 16" hex 2 .140" 2000 75

EAJ190 12-14 1" 5/ 16" hex 3 .210" 4000 150

EAJ220 12-14 1-1/ 2" 5/ 16" hex 3 .210" 2500 125

EAJ260 12-14 2-1/ 2" 5/ 16" hex 3 .210" 1500 50

EAJ340 12-24 2" 5/ 16" hex 5 .500" 2000 75

EAJ415 1/ 4-14 1" 3/ 8" hex 2 .175" 3000 125

EAJ430 1/ 4-14 1-1/ 2" 3/ 8" hex 2 .175" 2000 75

EAJ445 1/ 4-14 2" 3/ 8" hex 2 .175" 1500 50

EAJ540 1/ 4-20 1" 3/ 8" hex 3 .312" 2500 125

EAJ580 1/ 4-20 1-1/ 2" 3/ 8" hex 3 .312" 2000 75

EAJ610 1/ 4-20 2" 3/ 8" hex 3 .312" 1500 50

EAJ640 1/ 4-20 2-1/ 2" 3/ 8" hex 3 .312" 1000 50

EAJ615 1/ 4-20 2" 3/ 8" hex 5 .500" 1500 50

Flat Head Reamers w/ wings

EBN140 10-16 1-1/ 2" #2 phillips 3 .140" 3500 125

EBN345 12-24 2-13/ 16" #3 phillips 5 .500" 1500 50

EBN645 1/ 4-20 2-13/ 16" #3 phillips 5 .500" 1000 50

Flat Undercut Head

EBN200 12-14 1" #3 phillips 2 .140" 4000 150

EBN240 12-14 1-1/ 2" #3 phillips 2 .500" 2500 125


16/31


30 2 (18-8) St ainless St eel Drill ScrewsFor fastening to aluminum when corrosion is a primary concern

Stainless steel drill screws provide strength and corrosion resistance ina variety of aluminum applications.


Lengths: 1/ 2" to 1-1/ 2"

Head Style: Hex washer

Drive System: Hex

Point Types: #3 and #4

Material: 302 stainless steel

Finish: Silver top coat

Features & Benefit sProvides a very high level ofcorrosion resistance

Silver top coat finish protectsaluminum from galvanic reactionwith fastener

Head marked with a 3 for easyidentification

Note: For aluminum applicat ions only.


#10 Diameter Hex Washer Head

EAH430 10-16 x 1/ 2 #3 silver top coat 8000 43

EAH445 10-16 x 3/4 #3 silver top coat 6000 41EAH460 10-16 x 1 #3 silver top coat 4000 32

#12 Diameter Hex Washer Head

EAH630 12-14 x 3/4 #3 silver top coat 5000 40

EAH650 12-14 x 1 #3 silver top coat 5000 48

EAH680 12-14 x 1-1/ 2 #3 silver top coat 2500 39

1/ 4" Diameter Hex Washer Head

EAH800 1/4-14 x 3/4 #3 silver top coat 3500 44

EAH820 1/4-14 x 1 #3 silver top coat 3000 47

EAH835 1/4-14 x 1-1/ 2 #3 silver top coat 2000 40

EAH870 1/4-20 x 1 #4 silver top coat 3000 48

EAH880 1/4-20 x 1-1/ 2 #4 silver top coat 2000 40


17/31


304 Stainless Steel Self-Tapping ScrewsFor applications where corrosion resistance is a primary concern

Elco manufactures and stocks the most popular 304 (18-8) stainlesssteel self-tapping screws with a 300 series stainless steel bondedsealing washer.

SpecificationsDiameters: #14 to #17


Head Style and Drive System: Hex

Point Types: A and B


Finish: Zinc

Features & BenefitsThread/point styles available to

match your specific applicationSaves time and labor byeliminating tapping operations

Standard thread designs alloweasy field replacement

Zinc plated for lubricity and toreduce galvanic reaction

Cat alog No. Descript ion Drive Syst em Point Type Finish Cart on Quant it y

# 14 Diameter; Type A Point ; 3/ 8" Hex Head

EHE400 14-10 x 3/4 Hex A Zinc 3000

EHE410 14-10 x 1 Hex A Zinc 2500

EHE430 14-10 x 1-1/2 Hex A Zinc 2500

1/ 4" Diameter ; Type B Point; 3 / 8" Hex Head

EHE500 1/4-14 x 3/4 Hex B Zinc 3000

EHE510 1/4-14 x 1 Hex B Zinc 2500

EHE530 1/4-14 x 1-1/2 Hex B Zinc 2500

EHE550 1/4-14 x 2 Hex B Zinc 2000

EHE570 1/4-14 x 3 Hex B Zinc 1000

100%average improvement in drive bitlife; many users of the TORX PLUSDrive System have driven 2 to 10 timesmore fasteners per drive tool

Increases tool engagement

Virtually eliminates camout minimizestool slippage and damage it can cause

Ensures proper torque transfer

Greatly reduces end load requirements can reduce fatigue and muscular stressduring manual assembly of fasteners

largercross-sectional

area at lobeselliptically-based

geometry

0 driveangle

broadcontactsurface

Many configurationsavailable, includingtamper-resistant

Improves Installation Performance OverHex, Phi ll ips, TORX Drive and Ot hers!


18/31


Fab-Lok FastenersTo maintain panel integrity in high-stress and high-vibration environments

Vibration, either from inside or outside a building, can make ordinaryfasteners loosen and back out. Fab-Lok fasteners combine a slottedaluminum sleeve and fastener to provide high resistance to vibrationloosening. Excellent for use with insulated panels.

Specifications

Drive System: Hex

Materials: Low carbon steel or300 series stainless steel screwwith aluminum sleeve

Finish: Zinc

Features & Benefit s

Hex washer head machine screwassembled to a slotted aluminumsleeve and EPDM sealing washer

After tightening, clamping tinesremain in place even if screw isremoved

Greater joint integrity

*Fab-Lokfastener is inserted into a 5/ 16" hole (hole size is not critical) then installed with a power driver equipped with a Fab-Lok holding sleeve,with a socket designed to fit DeWalttools DW969K-2, DW968K-2, DW267, DW268 and DW269.

Cat alog No. Descript ion Penet rat ing Lengt h Grip Range Cart on Quant it y

Carbon Steel

EZJ100 FAS-10-4 1.373" .062" .250" 1000

EZJ120 FAS-10-8 1.612" .250" .500" 1000

EZJ140 FAS-10-12 1.807" .500" .750" 1000

H-3 (300 Series) Stainless Steel

EZJ210 FAC-10-4 1.373" .062" .250" 1000

EZJ230 FAC-10-8 1.612" .250 " .500" 1000

EZJ250 FAC-10-12 1.807" .500" .750" 1000

Fab-Lok Drive Tools*

EZJ900 Holding Sleeve with Socket 1

Bi-metal technology 300 (18-8) stainless steelhead and shank fused to a hardened steeltapping threads and gimlet point

Alternating, hi-low notched thread profile provides

quick cutting and stability during installationSilver-colored Stalgard GB (Galvanic Barrier)coating

Virtually immune to hydrogen-assisted stresscorrosion cracking

High strength/ductility

Provides out st anding corrosion resistanc e

The perfect choice forexposed/wet areas/ aggressive

environments

The corrosion resistance of 300 seriesst ainless st eel and t he effi ciency ofhardened steel t apping threads

See page 25 for more details.


19/31


UltraCon Masonry Fastening SystemOffers optimal performance in concrete, brick and hollow block applications

UltraCon fasteners are available in a variety of styles to meet your needs.

SpecificationsDiameters: 3/ 16" to 5/16"

Head Styles: Hex, flat, hex flange,hex washer, TrimFit hex and

TrimFit flat



Finishes: Blue, silver, and whiteStalgard coating standard;bronze available upon request

Features & BenefitsInstalls quickly when using Elcoinstallation tools

When all three elements of thesystem are used, consistentperformance and maximumpull-out strengths can be realized

Stalgard coating provides 800hours of salt spray resistance (perASTM B117)

Catalog Number (By Finish)

Dia. Lengt h Drive Syst em

Tanged Bit

Blue Silver Whit e Dia. Lengt h

Slotted Hex Washer Head

ELE300 3/16" 1-1/4" 5/16" slotted 5/ 32" 3-1/ 2"

ELE310 3/16" 1-3/4" 5/16" slotted 5/ 32" 3-1/ 2"

ELE320 3/16" 2-1/4" 5/16" slotted 5/ 32" 4-1/ 2"ELE330 3/16" 2-3/4" 5/16" slotted 5/ 32" 4-1/ 2"

ELE340 3/16" 3-1/4" 5/16" slotted 5/ 32" 5-1/2"ELE350 3/16" 3-3/4" 5/16" slotted 5/ 32" 5-1/2"

ELE360 3/16" 4" 5/16" slotted 5/ 32" 5-1/2"

ELE400 1/4" 1" 5/16" slotted 3/16" 3-1/2"ELE405 1/4" 1-1/4" 5/16" slotted 3/16" 3-1/ 2"

ELE415 ELG341* ELD195* 1/4" 1-3/4" 5/16" slotted 3/16" 3-1/2"ELE425 ELG371* ELD205* 1/4" 2-1/4" 5/16" slotted 3/16" 4-1/2"

ELE435 ELG401* 1/4" 2-3/4" 5/16" slotted 3/16" 4-1/2"ELE445 ELG431* ELD225* 1/4" 3-1/4" 5/16" slotted 3/16" 5-1/2"

ELE455 1/4" 3-3/4" 5/16" slotted 3/16" 5-1/2"

ELE465 1/4" 4" 5/16" slotted 3/16" 5-1/2"ELE475 ELD255* 1/4" 5" 5/16" slotted 3/16" 6-1/2"

ELE485 ELD265* 1/4" 6" 5/16" slotted 3/16" 7-1/ 2"Phillips Flat Head

ELF305 ELG521* ELD320* 3/16" 1-1/4" #2 phillips 5/32" 3-1/2"ELF315 ELG551* ELD330* 3/16" 1-3/4" #2 phillips 5/32" 3-1/2"

ELF325 ELG581* ELD340* 3/16" 2-1/4" #2 phillips 5/32" 4-1/2"

ELF335 ELG611* ELD350* 3/16" 2-3/4" #2 phillips 5/32" 4-1/2"ELF345 ELG641* ELD360* 3/16" 3-1/4" #2 phillips 5/32" 5-1/2"

ELF355 ELG671* ELD370* 3/16" 3-3/4" #2 phillips 5/32" 5-1/2"ELF365 ELD380* 3/16" 4" #2 phillips 5/32" 5-1/2"

ELF400 ELG731* ELD385* 1/4" 1-1/4" #3 phillips 3/16" 3-1/ 2"

ELF410 ELG761* ELD395* 1/4" 1-3/4" #3 phillips 3/16" 3-1/ 2"ELF420 ELG791* ELD405* 1/4" 2-1/4" #3 phillips 3/16" 4-1/2"

ELF430 ELG821* ELD415* 1/4" 2-3/4" #3 phillips 3/16" 4-1/ 2"ELF440 ELG851* ELD425* 1/4" 3-1/4" #3 phillips 3/16" 5-1/2"

ELF450 ELG881* ELD435* 1/4" 3-3/4" #3 phillips 3/16" 5-1/ 2"ELF460 ELD445* 1/4" 4" #3 phillips 3/16" 5-1/2"

ELF470 1/4" 5" #3 phillips 3/16" 6-1/2"

ELF480 1/4" 6" #3 phillips 3/16" 7-1/ 2"ELG941* 5/16" 2-1/4" #4 phillips 1/4" 4-1/ 2"

ELG948* 5/16" 2-3/4" #4 phillips 1/4" 4-1/ 2"ELG960* 5/16" 3-1/4" #4 phillips 1/4" 4-1/2"

ELG979* 5/16" 4" #4 phillips 1/4" 5-1/2"ELG992* 5/16" 5" #4 phillips 1/4" 7-1/ 2"

ELG998* 5/16" 6" #4 phillips 1/4" 7-1/2"

NOTE: All anchors are packed 100/ box with tanged drill bit, unless packed bulk as indicated with *.


20/31


Ult raCon M asonry Fast enersOffers optimal performance in concrete, brick and hollow block applications

NOTE: All anchors are packed 100/ box with tanged drill bit, unless packed bulk as indicated with *. Six boxes per carton.

Catalog Number (By Finish)

Dia. Lengt h Drive Syst em

Tanged Bit

Blue Silver Whit e Dia. Lengt h

Hex Flange Head (5/ 8" O.D.)

ELC145* ELD275* 1/4" 1-3/4" 5/16" hex 3/16" 3-1/ 2" ELC151* ELD285* 1/4" 2-1/4" 5/16" hex 3/16" 4-1/ 2"

ELC160* ELD295* 1/4" 2-3/4" 5/16" hex 3/16" 4-1/ 2"

ELC170* ELD305* 1/4" 3-1/4" 5/16" hex 3/16" 5-1/ 2"Hex Head with Oversized Washer (.54 0" O.D.)

ELG481* 5/16" 1-3/4" 5/16" hex 1/4" 4-1/ 2" ELG486* 5/16" 2-1/4" 5/16" hex 1/4" 4-1/ 2"

ELG491* 5/16" 2-3/4" 5/16" hex 1/4" 4-1/ 2" ELG496* 5/16" 3-1/4" 5/16" hex 1/4" 5-1/ 2"

ELG501* 5/16" 3-3/4" 5/16" hex 1/4" 5-1/ 2" ELG506* 5/16" 4" 5/16" hex 1/4" 5-1/ 2"

ELG511* 5/16" 5" 5/16" hex 1/4" 7-1/ 2"

ELG516* 5/16" 6" 5/16" hex 1/4" 7-1/ 2"TrimFit Flat Head (.415" O.D. nom.)

ELG771* ELD400* 1/4" 1-3/4" #4 phillips 3/16" 3-1/ 2" ELG801* ELD410* 1/4" 2-1/4" #4 phillips 3/16" 4-1/ 2"

ELG831* ELD420* 1/4" 2-3/4" #4 phillips 3/16" 4-1/ 2" ELG861* ELD430* 1/4" 3-1/4" #4 phillips 3/16" 5-1/ 2"

ELG891* ELD440* 1/4" 3-3/4" #4 phillips 3/16" 5-1/ 2"

ELG921* 1/4" 4" #4 phillips 3/16: 5-1/ 2" ELG945* 5/16" 2-1/4" #4 phillips 1/4" 4-1/ 2"

ELG955* 5/16" 2-3/4" #4 phillips 1/4" 4-1/ 2" ELG965* 5/16" 3-1/4" #4 phillips 1/4" 5-1/ 2"

ELG972* 5/16" 3-3/4" #4 phillips 1/4" 5-1/ 2"

ELG976* 5/16" 4" #4 phillips 1/4" 5-1/ 2" ELG991* 5/16" 5" #4 phillips 1/4" 7-1/ 2"

TrimFit Hex Head (.415 nom. washer O.D.)

ELG482* 5/16" 1-3/4" 5/16" hex 1/4" 4-1/ 2"

ELG487* 5/16" 2-1/4" 5/16" hex 1/4" 4-1/ 2" ELG492* 5/16" 2-3/4" 5/16" hex 1/4" 4-1/ 2"

ELG497* 5/16" 3-1/4" 5/16" hex 1/4" 5-1/ 2" ELG502* 5/16" 3-3/4" 5/16" hex 1/4" 5-1/ 2"

See page 24 of this catalog for more details.

Flex Technology heat treatment provides dual hardness zones:Lead threads are extremely hard for more efficient and

effective thread tappingThe lower hardness of the rest of the fastener renders itvirtually immune to brittle failures

Installs using standard ANSI masonry drill bits

Silver Stalgard finish provides exceptional corrosion resistance

Locking serrations under the head provide back-out resistance

Provides high pull-out and shear values

A Large Diameter M asonry ScrewVirt ually Immune To Brit t le Failures


21/31


UltraCon Masonry Fastening SystemOffers optimal performance in concrete, brick and hollow block applications

** For use with with rotary hammer drills and 1000 toolor specialty installation tools. Packaged one per tube,10 tubes per shipper.

Tanged Drill Bits*

Cat alog No. Diamet er Lengt h

ELT300 5/ 32" 3-1/2"

ELT310 5/ 32" 4-1/2"

ELT320 5/ 32" 5-1/2"

ELT405 3/16" 3-1/2"

ELT415 3/16" 4-1/2"

ELT425 3/16" 5-1/2"

ELT435 3/16" 6-1/ 2"

ELT445 3/16" 7-1/2"

ELT460 1/4" 4-1/2"

ELT465 1/4" 5-1/2"ELT475 1/4" 7-1/2"

* For use with hammer drill guns. Sold in tubes containing10 bits each.

Hex-coll ared SDS Carbide-t ipped Drill Bits * *

CatalogNo. Diamet er

OverallLength

FunctionalLength

ELT535 5/32" 5" 2"

ELT555 5/32" 7" 4"

ELT630 3/16" 5" 2"

ELT650 3/16" 7" 4"

Installat ion Tools Kits

CatalogNo. Descript ion Inst alls

Contents/Replacement Part s Descript ion

ELP100 1000 Toolall sizes and styles ofUltraCon anchors

ELY 100 Drill Adapter

ELY 110 Drive Sleeve Assembly

ELY 120 5/16" Hex Driver MagneticELY 130 1/4" Hex Socket for 3/16" Anchor

ELY 160 Phillips Adapter

ELY 140 #2 Phillips Bit


ELY 220 1/ 8" Hex Key

ELY 210 Set Screw 1/4-28

ELY 170 Drive Sleeve Assembly for 5" & 6" Anchors

ELP 150Specialty

Tool

1/ 4" diameter hex washerhead UltraCon anchors, up

through 1-3/4" in length

ELP 155 Drive Sleeve

ELT 630 Hex-collared Carbide-Tipped SDS Bit

ELY100 Drill Adapter

ELP250 Economy ToolUltraCon anchors up to 4"

in length

ELY 100 Drill Adapter



ELY 220 1/ 8" Hex Key

ELY 125 1/4" Hex Drive Adapter

Intended for use with hammer drills


22/31


Crete-Flex SS4 Masonry FastenersFor masonry attachments requiring enhanced corrosion resistance

Crete-Flex 410 stainless steel masonry fasteners provide high shearvalues, corrosion resistance and ductility for outstanding performance.

SpecificationsDiameters: #14 and 3/16"

Lengths: 1-1/ 4" to 6"

Thread Style: 14-10 heavy-duty

Head Styles: Hex washer, hexflange and flat





Special heat treatment to protectinherent corrosion resistance of

the 410 stainless steel materialStalgard coating provides 1600hours of salt spray resistance

Larger .201 root diameter providesexceptionally high shear values

Note: All fasteners are packed 100 per box, 5 boxes per shipper with the exception of 5" and 6" lengths

Cat alog No. Lengt h Drive Syst em Drill Bit Size

#1 4 Diamet er, Hex Washer Head (.425 " washer O.D)

EMF310 1-1/ 4" 5/ 16" hex 7/ 32 x 4-1/ 2"

EMF330 1-3/ 4" 5/ 16" hex 7/ 32 x 4-1/ 2"EMF350 2-1/ 4" 5/ 16" hex 7/ 32 x 4-1/ 2"

EMF370 2-3/ 4" 5/ 16" hex 7/ 32 x 4-1/ 2"

EMF390 3-1/ 4" 5/ 16" hex 7/ 32 x 5-1/ 2"

EMF410 3-3/ 14" 5/ 16" hex 7/ 32 x 5-1/ 2"

EMF430 4" 5/ 16" hex 7/ 32 x 5-1/ 2"

EMF450 5" 5/ 16" hex 7/ 32 x 7-1/ 2"

EMF470 6" 5/ 16" hex 7/ 32 x 7-1/ 2"

#1 4 Diamet er, Phllips Flat Head

EMF690 1-1/ 4" #3 phillips 7/ 32 x 4-1/ 2"

EMF710 1-3/ 4" #3 phillips 7/ 32 x 4-1/ 2"

EMF730 2-1/ 4" #3 phillips 7/ 32 x 4-1/ 2"

EMF750 2-3/ 4" #3 phillips 7/ 32 x 4-1/ 2"

EMF770 3-1/ 4" #3 phillips 7/ 32 x 5-1/ 2"EMF790 3-3/ 14" #3 phillips 7/ 32 x 5-1/ 2"

EMF810 4" #3 phillips 7/ 32 x 5-1/ 2"

EMF830 5" #3 phillips 7/ 32 x 7-1/ 2"

EMF850 6" #3 phillips 7/ 32 x 7-1/ 2"

#1 4 Diameter, Hex Flange Head (5/ 8" washer O.D.)

EMF340 1-3/ 4" 5/ 16" hex 7/ 32 x 4-1/ 2"

EMF360 2-1/ 4" 5/ 16" hex 7/ 32 x 4-1/ 2"

3/ 16" Diameter, Phil l ips Flat Head

EMF610 1-1/ 4" #3 phillips 5/ 32 x 4-1/ 2"

EMF620 1-3/ 4" #3 phillips 5/ 32 x 4-1/ 2"

EMF630 2-1/ 4" #3 phillips 5/ 32 x 4-1/ 2"

EMF640 2-3/ 4" #3 phillips 5/ 32 x 4-1/ 2"

EMF650 3-1/ 4" #3 phillips 5/ 32 x 5-1/ 2"

Masonry Drill Bits

Cat . No. Descript ion M ax. Cret e-Flex Anchor Lengt h

EMC100 7/ 32 x 4-1/ 2" Tanged 2-3/ 4"

EMC110 7/ 32 x 5-1/ 2" Tanged 4"

EMC115 7/ 32 x 7-1/ 2" Tanged 6"

EMC120 7/ 32 x 5-1/ 2" Hex-shanked SDS 2-1/ 4"

EMC130 7/ 32 x 7" Hex-shanked SDS 4"

EMC140 7/ 32 x 6 x 8-1/ 4" SDS** 5"

EMC150 7/ 32 x 9 x 11" SDS** 6"

* Diameter Information:O.D. = #14 (.268");I.D. = .201"

** EMC140 andEMC150 drill bitsare NOT shanked


23/31


Con-Flex Large Diamet er Concret e Screw AnchorsEnhanced ductility allows use in demanding exterior applications

Features & BenefitsFlex Technology heat treatmentallows virtual immunity to brittle

failuresLocking serrations under the headprovide back-out resistance

Hardened tip ensures efficienttapping into concrete

Head markings (Elco logo andlength in inches) allow easyinspection

Install with standard ANSI bits

SpecificationsDiameters: Oversized 3/8" and1/ 2" diameters

Material: Alloy steelHead Style: Hex washer head withlocking serrations

Thread Style: Double-lead

Finish: Silver Stalgard corrosion-resistant coating

Tensile Yield: 92,000 KSI min.(Grade 5); Tensile Ultimate:120,000 KSI min. (Grade 5)

Con-Flexmasonry screws are engineered to provide high pull-out and shearvalues with virtual immunity to brittle failures.

Cat alog No. Lengt h Thread Lengt h Drive Size Drill Bit Size Quant it y Per Box

3/ 8" Diameter, Hex Washer Head with Locking SerrationsEMR215 2-1/2" 2-1/4" 9/16" hex 3/ 8" 50

EMR235 3" 2-1/4" 9/16" hex 3/ 8" 50

EMR255 4" 3-1/ 2" 9/16" hex 3/ 8" 50

EMR265 5" 3-1/ 2" 9/16" hex 3/ 8" 25

EMR285 7-1/2" 3-1/ 2" 9/16" hex 3/ 8" 25

1/ 2" Diameter, Hex Washer Head with Locking Serrations

EMR320 2-1/2" 2-1/4" 3/4" hex 7/16" 50

EMR340 3" 2-1/4" 3/4" hex 7/16" 50

EMR360 4" 3-1/ 2" 3/4" hex 7/16" 50

EMR370 5" 3-1/ 2" 3/4" hex 7/16" 25

EMR380 6" 3-1/ 2" 3/4" hex 7/16" 25


24/31


Aggre-Gator 300 Series Stainless Bi-Metal Masonry FastenersThe corrosion resistance of 300 series stainless steel in a threaded concrete anchor

Aggre-gator anchors provide unmatched corrosion resistance in demandingapplications, such as those in coastal or wet areas.

SpecificationsDiameter: 1/ 4"

Lengths: 1-3/4" to 4"

Head Styles: Hex washer andTrimFit flat


Material: 300 (18-8) stainlesssteel head and shank with fusedand hardened steel tappingthreads and gimlet point

Finish: Silver-colored Stalgard GB(Galvanic Barrier) coating


Long service life high in-placevalue over life of structure

High strength and ductility

Offers greater galvaniccompatibility in dissimilar metalapplications involving aluminum

Thread profile provides quickcutting and stability duringinstallation

Installs with 3/16" masonry drillbits

Cat alog No.* Leng t h Drive Syst em Quant it y Per Box Quant it y Per Keg*

1/ 4 Diameter, Hex Washer HeadEML315 1-3/4" 5/16" hex 50 2000

EML325 2-1/4" 5/16" hex 50 1500

EML335 2-3/4" 5/16" hex 50 1000

EML345 3-1/4" 5/16" hex 50 1000

EML365 4" 5/16" hex 50 500

1/ 4 Diameter, TrimFit Flast Head

EMM310 1-3/4" #3 phillips 50 2500

EMM320 2-1/4" #3 phillips 50 1500

EMM330 2-3/4" #3 phillips 50 1000

EMM340 3-1/4" #3 phillips 50 1000

EMM360 4" #3 phillips 50 500

* Standard packaging: 50 anchors and 1 tanged masonry bit per box/ six boxes per shipper.

Bulk Quantities: Packed in kegs as shown. Available upon request. Indicate Bulk Packaging by placing a B at the end of theElco Catalog Number. Bulk packaging does not include masonry bits.

300 series stainless

steel head and shank

Fused and hardenedsteel tapping threads

and gimlet point

Bi-Metal Technology Provides Unmatched Performance

Head and shank made of 300 series (18-8) stainless steel

alloy to provide unmatched corrosion resistance in yourtoughest applications

Fused and hardened steel tapping threads make installationeasy and hold tight in block and poured concrete

Coated overall with silver-colored Stalgard GB, a GalvanicBarrier to protect aluminum components from acceleratedcorrosion when in contact with 300 series stainless steel


25/31


HangerMat e Threaded Rod Anchoring Syst emAnchoring system for threaded rod components

HangerMate anchors accept 1/4-20 and 3/8-16 threaded rod andcomponents of piping systems for attachment to steel, masonry, and wood.

Specifications

Sizes: For use with 1/4-20 and3/ 8-16 threaded rod; adaptor

installs 1/ 2" threaded rodLengths: 1-1/ 8" to 3"

Drive System: Hex


Finish: Plating per ASTM B633

Type II Class 12

Features & Benefits

Eases installation of sprinklersystems, strut, HVAC, cable trays

and various piping systemsSelf-drilling points for steel; inwood applications, no pre-drillingis required

Many styles UL listed and/or FMapproved

Installs with HangerMate Drive formost applications

Cat alog No. Descript ion Rod Size St eel Thick ness Quant it y/ Shipper

Steel Applications

Vertical M ount End-Drilled HeadEZG160 1/4-20X1 #3 point 1/4/20 .060 .250 300

EZG450 1/4-20X1 #2 point 3/ 8/16 .060 .125 300

EZG470 1/4-20X1 #3 point 3/ 8/16 .060 .250 300

EZG471 1/4-20X1 #3 point w/nuts 3/ 8/16 .060 .250 300

EZG490 1/4-20X1-1/2 #3 point 3/ 8/16 .060 .250 300

EZG491 1/4-20X1-1/ 2 #3 point w/nuts 3/ 8/16 .060 .250 300

EZG530 1/4-20X2 #3 point 3/ 8/16 .060 .250 300

EZG540 1/4-20X3 #3 point 3/ 8/16 .060 .250 300

EZG510 1/4-20X1-1/ 2 #5 point 3/ 8/16 .187 .500 300

EZG511 1/4-20X1-1/ 2 #5 point w/nuts 3/ 8/16 .060 .500 300

EZG610 1/4-20 collapsing insert 1/4/20 26 ga. .187" 300

EZG580 1/4-20X1; use with EZG610 3/ 8/16 26 ga. .187" 150



Horizontal M ount Cross-Drilled Head

EZH155 1/4-20X1 #3 point 1/4/20 .060 .250 300

EZH455 1/4-20X1 #2 point 3/ 8/16 .060 .125 300

EZH475 1/4-20X1 #3 point 3/ 8/16 .060 .250 300

EZH476 1/4-20X1 #3 point w/nuts 3/ 8/16 .060 .250 300

EZH495 1/4-20X1-1/2 #3 point 3/ 8/16 .060 .250 300

EZH496 1/4-20X1-1/ 2 #3 point w/nuts 3/ 8/16 .060 .250 300

EZH515 1/4-20X1-1/2 #5 point 3/ 8/16 .187 .500 300

EZH516 1/4-20X1-1/ 2 #5 point w/nuts 3/ 8/16 .060 .500 300

EZH535 1/4-20X2 #3 point 3/ 8/16 .060 .250 300

Note: 50 per box and 300 (6 boxes) per shipper.


26/31


HangerMat e Threaded Rod Anchoring Syst emAnchoring system for threaded rod components

Cat alog No. Descript ion Rod Size Qt y/ Shipper

Wood Applications

Vertical M ount End-Drilled Head

EZG315 5/16X2-1/4 1/4/ 20 300

EZG650 5/16X2-1/4 3/ 8/16 300

EZG670 5/16X3 3/ 8/16 300


EZH320 5/16X2-1/4 1/4/ 20 300

EZH665 5/16X2-1/4 3/ 8/16 300

Concrete Applications


EZG365 5/16X2-1/4 1/4/ 20 300

EZG730 5/16X2-1/4 3/ 8/16 300


EZH370 5/16X2-1/4 1/4/ 20 300

EZH735 5/16X2-1/4 3/ 8/16 300

Steel, Wood or Concrete (HangerMate MP anchors)


EZG910 1/4-10X2 1/4/ 20 300

EZG930 1/4-10X2 3/ 8/16 300


EZH935 1/4-10X2 3/ 8/16 300

All Mat erials Adapter for Hanging 1/ 2" Rod

EZE270 1/ 2/13 150

Simply install any 3/ 8" HangerMate anchor as required, then thread EZE270 adapter into it.

HangerMate Installation Tools

Cat alog No. Descript ion

EZE215 Drive Socket (for steel and wood applications)

EZE220 Drive Sleeve (for concrete applications)

EZE240 Drill Bit Adapter Kit

EZE320 Collared 25/64 Drill Bit (for HangerMate LG applications)

EZE340 ANSI 1/ 4" Tanged Drill Bit for Hammer Drills

EZE350 ANSI 1/4" SDS Drill Bit for Rotary Hammer Drills

EZE360 .234" Tanged Drill Bit for Hammer Drills

EZE380 .234" SDS Drill Bit for Rotary Hammer DrillsEZE290 Setting Tool for EZG580/EZG590/EZG600/EZG610 components


27/31


PanelMate Hurricane Panel Anchoring SystemThe quick, economical method to secure hurricane protection

formerly sold as Cat#ENX320 formerly sold as Cat#ENX328 * formerly sold as ENX322

Features & BenefitsFasteners accept standard 1/ 4-20hardware

Provide exceptional pull-out andshear values

Provide outstanding corrosionresistence (withstands 800 1000 hours in salt spray testingper ASTM B117 standards)

Tested to tough Miami-Dadehurricane standards

PanelMate fasteners offer one-time installation the anchors stay in place,ready for even faster and easier panel mounting as the next storm approaches

SpecificationsStyles: Double-ended studs(accept standard 1/4-20 nuts);

anchor with Internally-threadedhead (accepts standard 1/ 4-20hardware); hex fasteners andinternally-threaded inserts

Thread Style: Oversized 14-10V-notched threads (.270 O.D.)

Materials: Carbon steel and 18-8stainless steel

Finish: Carbon steel designs haveStalgard coating

Descript ionCatalog

No.1 / 4 -20 S t ud

Thread Lengt hAnchorLength

14 -10 FastenerThread Lengt h M at erial Finish

Qty./ Box

PanelMate Pro Anchors

Double-ended

studs withstop collar

(acceptstandard1/4-20nuts)

ENT220 5/ 8" 2-1/4" 2" carbon steel Silver Stalgard 500

ENT320 5/ 8" 3-1/4" 3" carbon steel Silver Stalgard

ENT225* 7/ 8" 2-1/4" 2" carbon steel Silver Stalgard 800

ENT226 7/ 8" 2-1/4" 2" stainless steel Passivated 800

ENT325 7/ 8" 3-1/4" 3" carbon steel Silver Stalgard 500

ENT326 7/ 8" 3-1/4" 3" stainless steel Passivated 500

ENT450 7/ 8" 4-1/ 2" 3" carbon steel Silver Stalgard 250

ENT451 7/ 8" 4-1/ 2" 3" stainless steel Passivated 250



Descript ion

Catalog

No. Overall Anc hor Lengt h

14 -10 Fastener

Thread Lengt h M at erial Finish

Qty.

/ BoxPanelMat e Female ID (Int ernal Drive) Anchors

Internally-threadedheadacceptsstandard1/4-20hardware

ENW260 2-5/ 8" 1-3/ 4" carbon steel fastener with stainless steel head Silver Stalgard 1000

ENW261 2-5/ 8" 1-3/4" stainless steel Passivated 1000

ENW300 2-5/ 8" 1-3/4" all carbon steel Silver Stalgard 500

ENW325 3-1/ 4" 2" carbon steel fastener with stainless steel head Silver Stalgard 500

ENW326 3-1/4" 2" stainless steel Passivated 500


ENW451 4-1/ 2" 3" stainless steel Passivated 500



Descript ionCatalog

No.1 / 4 -20 S t ud



Qty./ Box

PanelMate Plus AnchorsDouble-

ended studs(no washer

or stopcollar)

ENX383 1-1/4" 2-1/4 2-1/ 8 carbon steel Silver Stalgard 1000

ENX384 1-1/4" 2-1/4 2-1/ 8 carbon steel White Stalgard 300

ENX400 1-1/4" 2-1/4 2-1/ 8 stainless steel Passivated 1000


28/31


Masonry Drill Bits

Cat alog No. Descript ion Funct ional Lengt h

Tanged Masonry Drill Bits

EMC100 7/ 32 x 4-1/ 2" tanged masonry drill bit 3"

EMC110 7/ 32 x 5-1/ 2" tanged masonry drill bit 4"EMC115 7/ 32 x 7-1/ 2" tanged masonry drill bit 6"

EMC116 7/ 32 x 13" hex stem masonry drill bit 11-1/ 2"

SDS Hex Shanked Masonry Dri l l Bits* * *

EMC120 7/ 32 x 5-1/ 2" SDS masonry drill bit 2-1/ 4"

EMC130 7/ 32 x 7" SDS masonry drill bitx 4"

EMC140 7/ 32 x 8 1/ 4" SDS masonry drill bit 5"

EMC150 7/ 32 x 11" SDS masonry drill bit 6"

Dril l Bit Adaptor

ELY1OO Tanged drill bit adapter ( 1/8" hex key included) NA

Drive Sockets and Sleeves

Cat alog No. Des cr ipt ion

ELY110 Drive sleeve adaptor

ENY140 Economy drive sleeve for PanelMatePlus anchorsENY156 PanelMatePro heavy duty modified 3/16" drive socket***

ENY165 Back-up driver with internal 1/4-20 threads

ENY190 5/16" hex drive tool 2" length



PanelMate Hurricane Panel Anchoring SystemThe quick, economical method to secure hurricane protection

DescriptionCatalog

No.1 / 4 -20 S t ud



Qty./ Bo x

PanelMat e TVAS* * Pro Anchors

Double-ended studs



Description CatalogNo. Overal l Anc hor Leng th 14 -10 FastenerThread Lengt h M at erial Finish Qty./ Bo x

PanelMat e TVAS* * Female Anchors

Internally-threaded

head

ENW737 7-3/ 8" 3" carbon steel Silver Stalgard 300


DescriptionCatalog

No. Overal l Anc hor Leng th14 -10 FastenerThread Lengt h M at erial Finish

Qty./ Bo x

PanelMate TVAS* * Hex Anchors

Hex headscrew

ENX335 7-3/ 8" (below head) 3" carbon steel Silver Stalgard 400

DescriptionCatalog

No. Overal l Anc hor Leng th14 -10 FastenerThread Lengt h M at erial Finish

Qty./ Bo x

PanelMate L Inserts

Internally-threaded

insertENX305 2-1/ 8" N/ A carbon steel

Silver Stalgardand nylon

locking patch500

PanelMate S Inserts

Internally-threaded

insertENX310 1-5/ 8 N/ A carbon steel Silver Stalgard 1000

** Through-Veneer Anchoring System

***ENY 156 drive socket is specially-sized.


29/31


RapidSet ToolsThe fastest, easiest and most reliable way to install machine screw (calk-in) anchors

Features & BenefitsPower tool does all the work, nopounding with setting tools

Automatically sets anchor justbelow the surface

Maximizes expansion of bottomportion of lead sleeve whichresults in consistently highpull-out values

SpecificationsFor calk-in anchor sizes #10, 1/4"and 3/8"

Designed for use with power tools,including battery impact drivers

MAXX model allows placement of1/ 4" anchors at various depths(up to 2) below the surface

Efficient RapidSet tools eliminate clumsy hammer and setting processesor expensive, slow expander tools.

Cat alog No. For Inser t -Anchor Size

Standard RapidSet tool

EZB790 #10-24

EZB800 1/ 4-20

EZB820 3/ 8-16

RapidSet MAXX tool

EZB810 1/ 4-20

The Corrosion Resistance of300 Series St ainless St eel and theEfficiency of Drillscrews

See page 16 of this catalog for more details.

Features

Bi-metal technology 300 (18-8) stainless steel head and shank

Fused and hardened steel drill point

Silver-colored Stalgard GB coating

Wide variety of sizes and head styles

Benefits

Outstanding corrosion resistance and long service lifeHigh strength, ductility and reliability

Virtually immune to delayed embrittlement failures

Greater galvanic compatibility in dissimilar metal applicationsinvolving aluminum

300 seriesstainless

steel headand shank

Fused andhardened

steeltapping

threads anddrill point

Note: Rapid-Settools draw the anchors internal insert up into the anchors outer sleeve; this installation process eliminates theneed to maintain a back bearing surface (required by hammer setting tools).


30/31

Notes


31/31

Elco, Aggre-gator, Bi-Flex, Crete-Flex, Dril-Flex, Drilltite, Fab-Lok, Flex Technology, Flo-Seal, HangerMate, Stalgard, Tapfast,

Elco Construction Products1.800.435.7213 (USA & Canada)


Proud Member of:

Warranty and Limitat ion of Liabilit y:All warranties of the Elco products, expressed or implied,including the warranties of merchantability and fitness for

particular purposes are specifically excluded for the following:Elco will repair any product which, within twelve months after

sales by Elco Construction Products or its distributors, is

found by Elco to be defective in material or workmanship-- normal wear and tear excepted. This is the sole warranty ofElco Construction Products and the sole remedy available todistributor or buyer. Elco shall not be liable for any injury, lossof damage, direct, incidental or consequential, arising from

use of, or the inability to use, any Elco product.

Elco Construction Products has strived for total accuracythroughout this catalog. However, Elco Construction Products

shall not be liable or responsible for any typographicalerrors or changes in product offering that may occur. If anyquestions arise as to the accuracy of this catalog, please

contact us at 1-800-435-7213.

August 2008

Documents

Constr Catalog Web