COMPUTER TRICK AND TIPS

Embed Size (px)

Citation preview

  • 7/30/2019 COMPUTER TRICK AND TIPS

    1/3

    SET-A

    Date: Name:

    Computer Fundamentals

    1. The brain of any computer system isA. ALU B. Memory C. CPU D. Control unit E.

    None of the above

    2. A computer program that converts assembly language to machine

    language is

    A. Compiler B. Interpreter C. Assembler D. Comparator E.

    None of the above

    3. From what location are the 1st computer instructions available on boot

    up?A. ROM BIOS B. CPU C. boot.ini D. CONFIG.SYS E.

    None of the above

    4. With respect to a network interface card, the term 10/100 refers to

    A. protocol speed B. a fiber speed C. megabits per seconds D. minimum

    and maximum server speed E. None of the above

    5. The mouse pointer moves erratically, what is the possible cause? The

    mouse

    A. ball is dirty B. is not connected C. driver is not installed properly D.

    has an incorrect IRQ setting

    6. The 34-pin connection on an I/O card is for?

    A. Floppy drive B. SCSI drive C. IDE drive D. Zip drive

    7. A 25-pin female connector on the back of your computer will typically

    be:

    A. Serial port 1 B. A parallel port C. Docking D. COM2 port

    8. RS-232 is a standard that applies to:

    A. serial ports B. parallel ports C. game ports D. networks

    9. Process is

    A. program in High level language kept on disk B. contents of main memory

    C. a program in execution D. a job in secondary memory

    10. A computer cannot "boot" if it does not have the

  • 7/30/2019 COMPUTER TRICK AND TIPS

    2/3

    A. Compiler B. Loader C. Operating system D. Assembler

    SET-B

    Date: Name:

    Computer Fundamentals

    1. How long is an IPv6 address?

    A. 32 bits B. 128 bytes C. 64 bits D. 128 bits

    2. Where is a hub specified in the OSI model?

    A. Session layer B. Physical layer C. Data Link layer D. Application

    layer

    3. In ROM BIOS, the acronym BIOS stands for:

    A. Basic Intuitive Output Set B. Basic Input Organizational System C. Basic

    Input Output System

    D. Basic Industry Operating System

    4. How many pins on a VGA?

    A. 15. B. 9 C. 25 D. 32

    5. What is modified when changing the system start-up boot sequence?A. BIOS/CMOS B. CONFIG.SYS C. autoexec.bat D.

    COMMAND.COM

    6. You suspect a virus has entered your computer. What will not be

    affected by the virus?

    A. CMOS B. Boot sector C. Floppy disks D. Program

    files

    7. During the normal PC boot process, which of the following is active

    first?A. RAM BIOS B. CMOS C. ROM BIOS D. Hard disk

    information

    8. What can you use to ensure power is not interrupted, resulting in

    corrupted data?

    A. UPS B. Proper grounding C. Surge protector D. Nuclear

    powered thermal protective underwear

  • 7/30/2019 COMPUTER TRICK AND TIPS

    3/3

    9. The output voltages of a PC power supply are in the form of _____

    current.

    A. AC B. DC C. amperage D. resistive E. trickle

    10. The brain of any computer system isA. ALU B. Memory C. CPU D. Control unit E.

    None of the above