Embed Size (px)
Citation preview
2
Introduction: Siteck arises from some leading companies that supply products and services
with high technological profile in the field of industrial and
telecommunications, to meet the new requirements dictated by an increasingly
selective and highly competitive.
We introduce in the Italian market and abroad aware of being able to offer
companies a wide range of solutions and services.
Starting from an operational background technical and professional business
experience gained in the above, we tried more and more to refine the
production to optimize customer services.
In addition, thanks to new technical and professional figures, the company has
perfected the areas of design, production and certification of plants derived
from alternative sources, complete with distribution panels (made in the
company), with automatic data transmission, systems for remote diagnostics /
remote control.
In summary, we offer ourselves as manufacturers and installers of Power
Station, also known as conversion systems, AC / DC, used by companies
operating in the field of fixed and mobile telephony.
Our systems are used in rectifiers conversion (Rectifier) of various sizes and
power ratings from 50 to 200 amps, which are selected according to the rated
power of the same machine that you have to accomplish.
3
Rectifiers are used to nominal output voltage (OUT) at 48 Vdc and
conversion technology in high frequency (switching) systems that have an
efficiency of 97%, while with a variable load between 30% and 70% of the
rated current, you get to get an efficiency of 96.5%; all this makes the end
user gets a very high energy savings.
In addition to realize their Power Station, Siteck, it is also the manufacturer
of custom stations for multinational companies operating in the market:
Emerson Network Power, Eltek Valere, New Ave, General Electric,
Telecom, Wind, Huawei.
In addition, there is on the market as an installer of different types of
devices boasting a wealth of experience in distribution systems in DC for
the telecommunications market.
Today Siteck is able to realize and design Cabinet outdoor (Outdoor) for
the housing of the transmission equipment, constructed to be able to stay
at its internal systems to “19” or “21".
As regards the cooling system of the cabinet are used
different technologiestype:
Forced ventilation with fans powered at 48Vdc and lasting life of
75,000 hours at a temperature of 40 ° C.
Systems dissipating natural, made with an aluminum heatsink.
System dissipating Peltier.
System dissipating air / air. (Thelatterstillbeingfinalizedandprojectapproval.)
4
More generally, the areas of application, can substantially be
summed up in four areas of the field:
1. Electrician
2. Switchboards and Power Stations
3. Lighting
4. Technological
In particular, with regard to electrical installations, paintings
and power stations, will perform the following tasks:
I. Plants of central power in DC and AC;
II. Construction of power stations AC / DC 48 V DC;
III. Construction of outdoor cabinets;
IV. Construction of indoor cabinet;
V. Construction of electrical current distribution.
5
Project activity
- Research and acquire sites for Radio Base Stations (RBS);
- SRB design;
- Design, construction and maintenance of electrical installations;
- Design, construction and installation of intrusion detection systems;
- Design, construction and installation of video surveillance systems;
- Design and installation of telecommunications networks;
- Design and implementation of structured cabling;
- Design and implementation of LAN networks;
- Design and implementation of Wireless Networks;
- Design and implementation of remote management systems;
- Design and implementation of SCADA / HMI systems for
building automation.
6
TLC services
- Architectural design, authorization procedures and detailed design;
- Optical visibility and radio Radio Links;
- Search disruptors;
- Topographic Survey;
- Impact Analysis and Electromagnetic Measurements in narrow band;
- Geological and geotechnical Relations;
- Verification of lightning;
- Safety Coordination (D.M. 8,112,008);
- Works Management, High Surveillance;
- Appraisals relating to plants built;
- Designing metallic carpentry;
- Microcellular networks (shops, airports, corporate offices);
Risk assessment in the workplace
- Risk assessment in the workplace
- Educational activities arising both specific complements such as fire
training and first aid.
7
Environmental surveys
- Surveys microclimatic
- Lighting Measurements
- Surveys and noise and vibration assessment
- Surveys electromagnetic fields
Certification Fire Prevention
- For submission to the competent organs Activities (Fire Service) of the
documentation for the "Test Project" procedure
- Designs for any necessary adjustments of the places, ensure its job
management and subsequent certification of the same, in the accompanying
inspection phase certification by VV.F ..
Surveys of "V.I.A." (environmental impact occurs)
- Environmental impact checks in the manner provided for in current
legislation.
8
Testing of civil works and technological plants
Construction accounting
- Collaboration in the Works management for the accounting management
of the contracts with surveys, measurements and tests for issue of accounting
records, such as the booklet of the measures, the accounting ledger, the
progress been issued for all the types of contract is civilian technology.
Verification activities of the technological
infrastructure
- Knowledge of standards (ISO, UNI, IEC, ETSI, CENELEC etc.)
- Application approach in relation to the context
- Experience gained in environments TLC: fixed, mobile and data centers
- Know how state of the art for all aspects of energy
- Sizing criteria of technological systems in TLC:
power supplies to network (with or without cab) and static and rotary
UPS;
• Power supply (with or without cab) and static and rotary UPS;
9
• Backup power supply (GE both with internal combustion engines with
either turbine) and related auxiliary facilities;
• DC power supply 48V, 60V and 400V (HVDC);
• Energy storage (free electrolyte or adjusted by valve);
• Connections AC and DC; barraggi (CDT); distribution;
• Environmental conditioning: heat, cold production (active and passive)
and relative distribution;
• Free cooling;
• Noise control (for air conditioning systems and generators;
• Control systems, regulation and management.
10
1. Electrician
In particular, as regards the industrial electrical installations, paintings and
power stations, we will implement the following activities:
I. power plants in central and alternating current;
II. of energy stations construction AC / DC 48 V DC;
III. Outdoor cabinet construction;
IV. indoor cabinet construction;
V. Construction of electrical distribution panels into alternating and direct
current.
VI. Cabins processing;
VII. ordinary and extraordinary maintenance of electrical systems, electrical
panels and data transmission;
VIII. Creation data-center facilities;
IX. Realization of all the works in metal structural work, carried out directly
in our factory.
11
2. Electrical panels and Energy Station
The Power Station (Energy Station), also called AC / DC conversion systems
are used by the major companies operating in the field of fixed and mobile
telephony.
In our systems we are used rectifiers conversion (Rectifier) of various sizes
and powers, from 50 to 200 amperes, which are chosen according to the
rated power of the machine which must be realized.
Rectifiers are used at the rated output voltage (OUT) 48 VDC and the high
frequency conversion technology (switching); these systems have a 97%
efficiency, while with a variable load between 30% and 70% of the rated
current, is possible to produce an efficiency of 96.5%; all this means that the
end user obtains a very high energy saving.
In addition to making its Energy Station, Siteck, it is also a manufacturer of
customized power stations (castomized) of direct commission of
multinationals operating in the market:
Emerson Network Power, Eltek Valere, Newave, General Electric, Huawei,
AEG, 3W Power, Sirti, Hitrac Engineering Group.
In addition, there is on the market as an installer of different types of
equipment boasting extensive experience in distribution systems in direct
current for the telecommunications market.
Today Siteck is able to realize and design Cabinet (Outdoor) for the housing
of transmission equipment, constructed to be able to stay at its internal
systems to 19 "or 21".
12
Concerning the cabinet of the cooling system are used different
technologies type:
A forced ventilation with a fan to supply to 48Vdc and
with a life duration of 75,000 hours at a temperature
of 40 ° C.
natural dissipation systems, made with an aluminum heat sink.
to dissipation system Peltier.
air / air dissipation system
Design and manufacture of energy stations, on customer specification:
With the help of highly professional CAD programs all metal components are
engineered and designed by ours. Technical office, in order to comply with the
customers' specifications, functionality and ease of access.
13
Subsequently, we switch to CAD / CAM conversion for the development of
machine molding and folding programs executed in the Company with ours
machines .
14
The electrical installation is designed and manufactured in accordance with
current regulations.
15
All of our power stations are tested at the factory and are accompanied by all
necessary documentation required by the regulations and the Customer
(Manuals, Multifilary Electrical Schemes, Test Reports).
16
Machining in telephone exchange:
Installing Power Stations: After placing the station, all power and signal
connections are made before the next test with the Customer.
17
The company has gained considerable experience in the manufacture of
Copper Shells, performing artwork efficiently, through specific equipment and
highly qualified personnel.
18
Retrofit Power Stations:
Siteck, on Customer's request, for those sites where budgets are reduced or
where existing stations need to be expanded without necessarily replacing,
designing, engineering and implementing specific power stations that can
interface mechanically and electrically with existing systems .
In order to offer turnkey service, Siteck performs all the planting works that
are required in the modernization of the plants, from the installation of
electrical systems (FM, lights) to the technological installations, such as air
conditioning, fire detection, intrusion, structured cabling Of environments
(both copper and fiber optics).
Installation and provision of infrastructures for mobile radio base stations
(shelter, plinths, poles, etc.)
19
Technology swap:
Identification of the necessary activities for qualitative adaptation and / or for
housing new equipment:
1. site adaptation project: civil works, electromechanical equipment and radio
equipment;
2. Verification of adaptation and installation of the equipment;
3. Acceptance and testing.
20
Technological Plants
Siteck has a full set of cooling solutions that include the state of the most
efficient and reliable cooling technology for ICT environments.
Cooling and power management are the bulk of the consumption of a data
center, although they are not directly related to productivity.
Measuring such loads is the essential basis for designing high energy
efficiency computing centers. Siteck solutions are designed to fully
accommodate the benefits of such techniques.
Optimized airflow direction provides optimized design to send air under
raised floors and from there, through cold corridors, to racks.
21
Steel Structures
Siteck manufactures at its plant in Latin steel structures and operates in the
production of boxes, enclosures and prepared for installation and protection
of the equipment in the fields of automation, control and command,
communication and power distribution.
Our company is able to produce both standard products as products
according to customers' specifications, covering a wide range of market and
articulate. Today the activity of Siteck srl it develops from the study and
design of products, until their production and marketing.
The use of high quality materials, combined with careful control of all
phases of production, guarantee the customer, products of high reliability in
functional terms that security.
The protection in storage and transport, is ensured by cardboard packaging
or by thermo-retractable film, personalized according to the type of product.
22
The machinery used to accomplish the metal structures are the
following:
- Press brake AM Machinery synchronized 3000 x 100 Ton;
- Punching ITEK Model _Q2 X-TRIM
23
Company Management:
The Technical and Administrative Structure is made up of:
CEO: Mr. Mario Capozzi
Technical Manager: Mr. Mario Capozzi
Design Production Technological Equipment: Mr. Gianni Avvisati
Security and Prevention Manager: Eng. Francesca Bertone
Chairperson: Dr. Daniele Capozzi
Tax and Tax Area: Dr. Franco Mansutti
Commercial Area: Miss Daniela Cecconi
24
Among our major customers, direct and indirect, we include:
The legal and operational headquarters is located in Via della Dinamica, 13
(Industrial Zone), Location Tor Tre Ponti - 04013 Latina -.
Our contacts are:
Tel& Fax + 39 . 0773.632819
Mail: [email protected]
25
Certifications:
1) The Siteck has obtained UNI EN ISO 9001: 2008, UNI EN ISO 14001:2004
e OHSAS 18001:1999 which is attached below
26
2) The technicians who work with Siteck have all the certifications required by
Italian law specifically those provided for by Presidential Decree 207/2010 and
Justice Ministerial Decree 31 October 2013, n. 143
3) Our installers are all licensed for structured cabling systems.
27
Below are attached some pictures that illustrate how well these devices are
manufactured.
28
29
30
31
32
33
Power Center low voltage switchboards with custom-made carpentry of any power
34
Electric panels with inverter drive
35
Electrical automation panels with plc
36
Electrical panels made to measure with a stainless steel structure or painted galvanized
sheet of any RAL color, design of the wiring diagrams and application programs according to customer needs.
37
Fixed and mobile Medium Voltage / Low Voltage transformer cabins built on freight
containers for maritime, rail, road transport.
