244
EnterpriseOne Xe Configurable Network Computing Implementation PeopleBook September 2000

Cnc - Jdedwards Xe

Embed Size (px)

Citation preview

Page 1: Cnc - Jdedwards Xe

EnterpriseOne XeConfigurable Network Computing Implementation PeopleBook

September 2000

Page 2: Cnc - Jdedwards Xe

J.D. Edwards World Source Company

7601 Technology Way

Denver, CO 80237

Portions of this document were reproduced from material prepared by J.D. Edwards.

Copyright J.D. Edwards World Source Company, 2000

All Rights Reserved

SKU XeEACI

J.D. Edwards is a registered trademark of J.D. Edwards & Company. The names of all other products and services of J.D. Edwards used herein are trademarks or registered trademarks of J.D. Edwards World Source Company.

All other product names used are trademarks or registered trademarks of their respective owners.

The information in this guide is confidential and a proprietary trade secret of J.D. Edwards World Source Company. It may not be copied, distributed, or disclosed without prior written permission. This guide is subject to change without notice and does not represent a commitment on the part of J.D. Edwards & Company and/or its subsidiaries. The software described in this guide is furnished under a license agreement and may be used or copied only in accordance with the terms of the agreement. J.D. Edwards World Source Company uses automatic software disabling routines to monitor the license agreement. For more details about these routines, please refer to the technical product documentation.

Page 3: Cnc - Jdedwards Xe

B73.3.1 (6/99)

Table of Contents

Configurable Network Computing Implementation 1–1. . . . . . . . . . . . . .���#���"�������� ��%� � /0 ��������������������������������������������������������������

�1������ #��#������1��$��"�"#�#� /0 ����������������������������������������

��#����� �#"������� #��#�����$�� "��#"������� ��� /0 ������������

$�� "��#"������� #��#�����$�� "��#"���2�+��#�3���� /0 ������������

4�������1�#��&��������"�52�#����'#�������� #��#����

$��"�"#�#� /06������������������������������������������������������������������������������������

.���#���"���#������'"���* ��1�#��&������#"���)�� ����#�#"���7�"��

/06

Path Code Setup 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .���#���"���4�������� ��.��2�#������ �0 ��������������������������������������

.���#���"���2�#��������#�)�#� �#"�� �0 ����������������������������������������������

.���#���"���2�#��������#�%��#"�� �06��������������������������������������������������

.���#���"���2�#��������#����� �����# �06������������������������������������������

��&"����"#��2�#������ �08������������������������������������������������������������������������������

$��"�����1���2�#������ �08������������������������������������������������������������������������

2�#�������1��"���������#"�� �0!������������������������������������������������������

���#"�����2�#���������'"�"#"�� �0!������������������������������������������������������������

9��"'�"�����* ��'��#���1���2�#������ �0/�����������������������������������������������

Object Configuration Manager 3–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .���#���"���#����*+��#����'"���#"���9����� 0 ��������������������������������������

�:��� ���'�#����*+��#����'"���#"���9����� 06����������������������������������

$�� "��#"���%�;��#�'����#� 06������������������������������������������������������������

$�� "��#"���%�;��#�'��3��"� 0!����������������������������������������������������������

��&"����"#��#����*+��#����'"���#"���9����� 0//����������������������������������������

9���"����*+��# 0/���������������������������������������������������������������������������������������

�*+��#����'"���#"���9������2���"�����#"�� 0� ������������������������������

9���"���7���"����:# 0�6������������������������������������������������������������������������������

%���"����*+��#����'"���#"���9������%���# 0�!����������������������������������������

%���"����*+��#����'"���#"���9������%���# 0�!����������������������������������

��##"���2���"�����#"���'����9�%���# 0������������������������������������������

2���"�����#"��<���9�9���"��������"����7 �*� �.���#����� �#������

���� 0�=����������������������������������������������������������������������������������������������������������

%���"���#����*+��#����'"���#"���9���"��������"���%���# 0 6������

%���"���#����*+��#����'"���#"���7 �*� �.���#��%���# 0 >������������������

%���"���#����*+��#����'"���#"����� �#��%���# 0 !��������������������������������

%���"���#����*+��#����'"���#"��������%���# 0 �����������������������������������

%���"���#���?�"'���*+��#����'"���#"���9������%���# 0 =������������������

2���"�����#"��<�?�"'���*+��#����'"���#"���9������@%=�>// �A ������������

06

%���"���#����*+��#����'"���#"�����#�����* ��.���#��%���# 068��������

Page 4: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

B73.3.1 (6/99)

2���"�����#"��<���#�����* ��.���#��@%=�>/�/$A 06>����������������������

%���"���#������#����9�%�����'��B�"���-���#"���%���# 06!����

%���"���#�����*�9�#���� �#"���B������� ��%���# 06�������������������������

2���"�����#"��<���*�9�#���� �#"���B������� ��%���#�@%=�>//��A ������

06=

%���"���#�����9���#�����.���#�,�� �#��%���# 08�����������������������������

2�#"#"��"���$�� "��#"���3��"��������� 08 ����������������������������������������������������

4�����9�#��B�"���-���#"�������#� 088������������������������������������������

�����B����"���"#��2�#"#"�����$�� "��#"���3��"� 08>����������������������������

2���"���%� ��/�5����1�#����� "��# 08>����������������������������������������������

2���"���%� ����5����1�#����#������� 08>��������������������������������������

2���"���%� �� �5�C��� ����#������� 08!��������������������������������������

�����1�#�#���"#"*�#��3��"� 08=������������������������������������������������������������������

)����"#���"#"*�#"���3��"� 08=����������������������������������������������������������������

B�"���-���#"���2���"���2�* �� 0>/������������������������������������������������������

-�" ���#��������#�#��#������� 0>�������������������������������������������������������������

B�"���-���#"���-�" �� 0> ������������������������������������������������������������������������

���������#���������������B�"���-���#"���-�" ������� 0> ��������

Environment Setup 4–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .���#���"������"�����# 60 ������������������������������������������������������������������������

���������� ���#������"�����#���'"�"#"�� 60 ������������������������������

����3"*���3"#����#� ���* ��@-��= A 606��������������������������������������������

����3"*���3"#�9�#����* ��@-��=6A 606����������������������������������������������

�������"�����#���#�" �5������ ����* ��@-��=6/A 608��������������������

�����*+��#����'"���#"���9�#����* ��@-=�>/�/A 608������������������������

�����*+��#�2�#��9�#����* ��@-��=6�A 608������������������������������������������

���:"#��������"���#"�� 608��������������������������������������������������������������

��&"����"#��������"�����# 60!����������������������������������������������������������������������

$��"���������"�����# 60���������������������������������������������������������������������������

����"���������"�����# 60//������������������������������������������������������������������������

����"�����1������"�����#�#����1���2�#������ 60/�����������������������

�� �#"���������"�����# 60/>������������������������������������������������������������������������

2���"�����#"��<����"�����#�9�#��@2��=6A 60/>��������������������������������

Data Sources 5–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .���#���"�����#������� 80 ��������������������������������������������������������������������������

.���#���"�����#�*�����#������� 80 ��������������������������������������������������

��#��������1��� 806����������������������������������������������������������������������������

��#�*���1��� 806��������������������������������������������������������������������������������

������* �������@�*+��#������)�A 806��������������������������������������������

����1�#��&�9���"���1����@�����1���A 806����������������������������������

���B���@�33�1���A 808������������������������������������������������������������������������

.���#���"���3��"����#������� 808��������������������������������������������������������

.���#���"���#���%�;�"�����#������������ 808����������������������������������

�"#"*�#���2���"�����#������� 80>������������������������������������������������

3��� ���#������� 80>������������������������������������������������������������������������������

B�"�����#����#������� 80>��������������������������������������������������������������

���#� ���* ����#������� 80>��������������������������������������������������������������

%�� "��#���3��� ���#����#������� 80>��������������������������������������������������

��#���"�#"�����*��%� ������#������� 80!����������������������������������������

Page 5: Cnc - Jdedwards Xe

Table of Contents

B73.3.1 (6/99)

��#�����#������� 80!����������������������������������������������������������������������������

�*+��#�3"*�"�����#������� 80�������������������������������������������������������������

���#� ��*+��#���#������� 80�������������������������������������������������������������

�����9�����#������� 80=��������������������������������������������������������������������

?�"�����#������� 80//������������������������������������������������������������������������

$�,6�����#������� 80/���������������������������������������������������������������������������

2 ���"�������� ����#������� 80/ ����������������������������������������������������������������

��&"����"#����#������� 80/8����������������������������������������������������������������������������

��#��������1��"���������#"�� 80/8����������������������������������������������������������

$��"�����9��"'�"�������#������� 80/>������������������������������������������������������

��#�*���9"�� ������"�� 80� ����������������������������������������������������������

2���"�����#"��<���#�*�����#������������3��"�� ���#�������

@2=�>//8A 80�6��������������������������������������������������������������������������������������������������

9��"'�"���#���%� ���,��#��������9�����* � 80�8������������������������������������

%���"�����#��������%���# 80�=������������������������������������������������������������������������

��##"���2���"�����#"���'����#��������%���# 80�=����������������������������

2���"�����#"��<���#��������9�#��@%=�>//A�������#��������9�#�

�����"���@%=�>//�A 80 �����������������������������������������������������������������������������

%���"���#�����#��������9�#�������"���%���# 80 ���������������������������

%���"���#�����#��������9�#��%���# 80 6������������������������������������������������

Middleware 6–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .���#���"������1�#�������"��#"���9"�� ���� >0 ����������������������������������

���1�#�������"��#"���9"�� ���� >0 ������������������������������������������������������

���&�#5B����������"��#"�� >06����������������������������������������������������������

9����5B����������"��#"�� >06������������������������������������������������������

����� ��2���5B������"�� >06����������������������������������������������������

1�#��&�2���� >08����������������������������������������������������������������������

C��� �2���� >0>��������������������������������������������������������������������������

.���#���"������B�����#�*���9"�� ���� >0!������������������������������������������

��#�*���9"�� �����- �� >0���������������������������������������������������������������������

Modes of Processing 7–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .���#���"���#���9�����'�2���"�� !0 ������������������������������������������������������

.���#���"����"��#5������#�2���"�� !0 ��������������������������������������������

.���#���"����#��5���5-�����2���"�� !06��������������������������������������

.���#���"���B�#��5�'5����2���"�� !0>����������������������������������������������

.���#���"���D��5� "��#�2���"�� !0���������������������������������������������������

��&"����"#���"��#5������#�2���"�� !0/�����������������������������������������������������

%���������#"���'����#������3��"���"#"*�#"�� !0/�������������������������������

��##"���.���"��#5������#�2���"�� !0/�����������������������������������������������������

.���#���"����*+��#�9���"���'���"��#5������#����"�����# !0//��

9�#����#��$��"�"#�#"������"�����# !0//����������������������������������������

�#�#��"��%���#"������"�����# !0//������������������������������������������������������

3���#"���9�#��B�"���-���#"�� !0/�������������������������������������������������

��&"����"#���#��5���5-�����2���"�� !0/ ����������������������������������������������

��##"���.���#��5���5-�����2���"�� !0/6��������������������������������������������

$��"�"#�"����#��5���5-�����2���"�� !0/>����������������������������������������

���� ���"��������"�� ���#� !0/>����������������������������������������������������������

���� ���"���B�"�����#� !0/=������������������������������������������������������������

9�&"���#�����#�*���$���"* ��#�����5.� !0��������������������������������

Page 6: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

B73.3.1 (6/99)

?�"'�"���#�������#��#��5���5-�������##"���"��#���+���"�"�-" � ������������

!0�/

2�'��"������5.����& !0�/��������������������������������������������������������������������

.���#"���#������5�����#�*���'���#��5���5-���� !0����������������

��#�"����#��5���5-����������#"�� !0����������������������������������������

.� ���"����#��5���5-����������#"�� !0� ������������������������������������

�����"�� ���#����* ��1������'���#��5���5-���� !0�6������������������������

B�"�����#����* ��1������'���#��5���5-���� !0�!��������������������������

B�'������� ���"���#���.����'"�����������* � !0�!��������������������

?��������#��@2�6//D/A !0��������������������������������������������������������������

����� ���#��@2�=//D/A !0�=��������������������������������������������������������������

�� ��������#��@26��6DA !0 ���������������������������������������������������������

Typical Customer Configuration 8–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .���#���"���#������"�� ������ �����'"���#"�� �0 ����������������������������������

.���#���"���E������"�����# �0 ��������������������������������������������������������

��������#��������'��.1)F������"�����1�����"�����# �06

��������#��������'��$�,6������"�����# �0>������������������������������

%���#�����"�����# �0=������������������������������������������������������������������������

����2�! ����"�����# �0=����������������������������������������������������������������

2�! �5��*+��#�9���"���@���5$�,6��A �0//��������������������������������

2�! �5��*+��#�9���"���@$�,6��A �0/�����������������������������������������

������! ����"�����# �0/6������������������������������������������������������������������

��! �5��*+��#�9���"���@���5$�,6��A �0/8����������������������������������

��! �5��*+��#�9���"���@$�,6��A �0/>������������������������������������������

����2E! ����"�����# �0/!������������������������������������������������������������������

2E! �5��*+��#�9���"���@���5$�,6��A �0/���������������������������������

2E! �5��*+��#�9���"���@$�,6��A �0/=����������������������������������������

�����?! ����"�����# �0������������������������������������������������������������������

�?! �5��*+��#�9���"���@���5$�,6��A �0�/��������������������������������

�?! �5��*+��#�9���"���@$�,6��A �0������������������������������������������

������! ����"�����# �0� ������������������������������������������������������������������

��! �5��*+��#�9���"���@���5$�,6��A �0�6����������������������������������

��! �5��*+��#�9���"���@$�,6��A �0�6������������������������������������������

.���#���"������"�� ���#������� �0�>������������������������������������������������������

.���#���"���1��5$�,6�����#������� �0�!��������������������������������������

.���#���"���$�,6�����#������� �0 �����������������������������������������������

.���#���"���#������'"���#"����#���7 ���� �0 ��������������������������������������

7 ��� �0 !������������������������������������������������������������������������������������������������������������

Page 7: Cnc - Jdedwards Xe

1–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Configurable Network Computing Implementation

����������������� ���������������"#��"���"�����'�����*�����'"���* �1�#��&"��������#"���@�1�A����"� "#������� ���#������"�"#�#������

��#��&,�������"�"#�#�����������#"���#�������#�#������"���"�#��#

#���"�"#"� ������ ��"�#� �#"���"����� �#������#���#��������#����������#�

�������������"�����#������'"������������"���#� ���������#����&�

������������"#"���#��#������'"���#"����#����'#��#���"�"#"� �"�#� �#"���

����������������� ���������������"#�����"#��'�#���'� ��"�����"��<

� ��������� ��������������������� �����������������"���"���"�"##����"��" ��'���1�����"� "#��������#�"��#���'� ��"���#��"�<

� .���#���"����"�� ����

� .���#���"�����#�������������"'�"���#��#�#�������������

�����*�������#��

� .���#���"����������#"�����#��������������"�����#

� ��&"����"#��#����*+��#����'"���#"���9�����

� .���#���"���#����"''���#�������'�����"��

� .���#���"�����#��"�� ������ ����#�������'"���#"��

� ���������������������������"���"���"��"##����"��" ��'������� �

�#������"�"#�#���������#�"��#���'� ��"���#��"�<

� .���#���"��������##"��������#���� "��#"��

� ��##"�������"�#�

� ."���#�����&��"#������������

� ��##"�����������'" �

� ��##"����������� �����"#�

� .���#���"���������&"����"#����#���"�#"��������"�"#�#"��

� .���#���"�������*� ������"��

� .���#���"���#����#"�������"��

� ��&"����"#�����"���*+��#�����"���"��

� ."���#�����"��� �#�* ��*���

� .���#���"�������� �����"���������#"��

� .���#���"���#���+���"�"�'" �

Page 8: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

1–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� �����������������������"���"���"��"##����"��" ��'������� �

�#������"�"#�#�������#����������������#������"'"��#"���#��#��

����� �����"�����#�������������������#�"��#���'� ��"��

#��"�<

� 2��&�������������#�� ���"��������#��

� ����� �����"'"��#"���� �

� �*+��#����������#

� 2��&����B�" �

� ��� �����#

� 9� #"#"����� �����#

� ����������������������������������������"���"���"��"##��

�"��" ��'����#��&����"�"#�#���������#�"��#���'� ��"���#��"�<

� .���#���"���������#�@�� #"� "��#�"�#� �A

� ��������"�"#�#"��

� ���* ����#"���#�����&#�#"��

� ���* ����#"���#������

$ #������������##���#����*���������#������"G��#���"�'���#"���"��#��

������������� ����������������"��������"���#��� �#���#�&���������

'"���#��#�#���"�'���#"����������#����'���#�����"�����#"��'������"#"���"

���"*���"������#����������"����-���:��� ���#������������"�����"* �

'���##"��������#�����������"�����#��������#�������@���"*���"��#��

��������� ��������������������� �������������A��"��#�� ��*�

����"* ��'��*�" �"���������� ��"������&����@���"*���"��#���������������������A�

����������������� ���������������"#��"�#������#� � ���#"���'��� �1�5� �#���#�&��:���#<

� )�"#"� �"�#� �#"����'������ �������#��� ����� ����� ���������!

� ����� ����������������� �#"�������#�������#��� ����� ��"����������!

� 1�#��&�"�'�#��#�������#�"�5��#���'#�����#���������"�#�������

��"�"�'���#"���"����"����*��#������ "��* ���'#������������

������������������������#����"����������#�#"���

E��������#������������ �#������#���"����'�#���"�#� �#"��������#����'��

���'"���#"���� ���"��������#���#�&��4�������#�����#��������������� ����������������"���"#�"�"���#��#�#��#���������#�������#�#��

"�#� �#"��������� "���

Page 9: Cnc - Jdedwards Xe

1–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding OneWorld Roles

��������� ��"�� ����#�#"�����#���� ������'"������"'"��� �<

� �1������ #��#������1�����"�"#�#�

� ��#���� �#"������� #��#�������� "��#"������� ���

� $�� "��#"������� #��#�������� "��#"�����+��#� ����

� 4���������#��&������#�"�5��#���'#�������� #��#����

���"�"#�#�

������'�#����� ��"���'�����*�������� #��#���������#�����$'#�

"�� ����#�#"����#���� ���'�#������� #��#�"��"�"�"���������'���"#�"��"#"��

#��#�#�����#���������#��#����;��#��#�"�"��������'��������'�#���� ��#�

*��������*��#��"������� �

CNC Consultant and CNC Administrator

�����1������ #��#������1�����"�"#�#�����"��� �����"#��"�#� "��

����� �������##"���������"�����#���������"#����"#"*�#�������"���

������#���� "��#"������������� ������"* ��'���##"��������"������#� ����

#�#"�����"����1�����'"���#"���������1������ #��#������1�����"�"#�#�

���#� �#������ �����#��'������ ���'#����#�������#�#�����������

Custom Solution Consultant and Application Developers

����� ����#���� �#"������� #��#��� ���*�"���"���*������ ��"��

��� "��#"�������"��"��������"*" "#"��"�� ������"��"���#������"'"��#"��

�"#���������"���"������������ ��"����#�#"��������"�#����"���#�����#��"G��

�'#�������" ��#����1�����"�"#�#����'���#�����"������#� �'���#"��

#��#�*�" ��������� ����'#�����#�����#����� �#"������� #��#���#��� �

���� ���#���"�#��� ���������'����� "��#"������� �����#���� ��'�����

*�"���

Application Consultants and Application Project Leaders

$'#������� ��"�"�#� �������'"����������� �����#��#������ "��#"��

���� #��#����#"����"��#��"�� ���������#��:��#��$ #��������� "��#"��

���� #��#������#�"�� ����#�#����1�����'"���#"����#������#�����#���

��������� ������ ���"#"*�#�������"������#���� "��#"�������"�����#�

����������*������#������� "��#"���"���"�' ������#����1�����""����)�

���"#"������� "��#"������� #��#���#�*����������������#�#��* ����#"��

��#��#"� ���* ���

Page 10: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

1–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Hardware, Network, and Third-Party Software Consultants andAdministrators

)�� ����#"�������� ��"�� ���������#�&�#��#������#"���#���������'�����

��������"������"�5��#������ #��#����"���#������"������� ��

��� ����#"������#�''����1������ #��#����#��&����"#��#����#��

���"'"��#"������� #��#�����������

Understanding the Configurable Network ComputingImplementation Guide

������������� ��������������������� ����������"���'������"��" �

�������#���#����������#��"���'#����������� ����������� ���$ #������"#�"

�"�����"��" ���#��1�����"� "#��#�����"#���#���+�*�'���#"�������'"���#��

"�'���#"�����'� ������#"� �#��#��"���"#"������� �

��"���"���"�� ����#���'� ��"�����#"��<

� 2�#���������#��

� �*+��#����'"���#"���9�����

� ���"�����#���#��

� ��#�������

� 9"�� ����

� 9�����'�2���"��

� ���"�� ���#�������'"���#"��

Page 11: Cnc - Jdedwards Xe

2–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Path Code Setup

2�#�������&����#��&��'��#��'��*+��#�����#��"� ���#"���"������� ���-�

������#��'��*+��#�"���������'"���#"��������� ���;�"������#������

��'"�"#"���"��#����*+��#�2�#��9�#��@-��=6�A�#�* ��

��"���#"�����'"�����#��������������"*������#���#����������"�#�"����#�

�����"������� ��

��"���#"������#�"��#���'� ��"��<

� .���#���"������������ �������#������

� ��&"����"#����#������

Page 12: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

2–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Page 13: Cnc - Jdedwards Xe

2–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding How OneWorld Uses Path Codes

$���#�������"�����"�#��#�����#��'��*+��#��-��������#��'��*+��#�"�����

���'"���#"����������#���'"�������#�������"��#����*+��#�2�#��9�#��#�* ���-�

�:��� �����������������������������#����#���������'"�"#"���'��������'

#���'� ��"����#��'��*+��#<

� ������������"#"����*+��#

� 2����#"����*+��#

� ���� �����#��*+��#

� ���'������%����2" �#�@�%2A��*+��#

�����*+��#�2�#��9�#��@2=���6�A���� "��#"������#����*+��#�2�#��9�#�

@-��=6�A�#�* ���

������� �����'"��������� �����������#������#������������� ����

��#���������"����"''���#���������"�����#�����"*��#���'� ��"��<

� .���#���"�����#��������#�"�#� �#"��

� .���#���"�����#��������#���#"��

� .���#���"�����#��������#����� �����#

Understanding Path Codes at Installation

����� ���;�"��#��#�������'"�������#�������"��#����*+��#�2�#��9�#��'�

������#��'����#� ��*+��#��$��#��'������ ���*+��#����"#��'��

���#� 5�*+��#���#��������������"��#����'��*+��#����"���"�� ����*�"��

'���#"������������"�� ����'" ����*+��#�'" ������������"�� "�&� "*�"��@�33A�

$���#���������'"�"#"������#�"��#�����#�������������'�#������#� 5�*+��#

���"'"��#"�������#����"��#�����#��#��#����*+��#��

���������*�" �������&����'��#�����&#�#"����������#����"'������#�������

����� �����#�"���#�������#����#��"�����"����#��'����#� ��*+��#�#������

#��������'��#������&��������#����"��#���#�������#�����#"��#"���'��#��

���&����

Page 14: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

2–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

������������ ����*+��#�#�������#��"��������#������&#�#"��������� �

���#��#���#�������#����#��"�����"����#��'��� "��#����*+��#�#������#��#��

��"�������������������'��#���*+��#�#���������#��"���������

��&#�#"������#��'��� "��#����*+��#������� ��#����� "��#����*+��#�"�

�"��#�"���"���#��������������#�����#�������'�����"���#�������

��� ����������� ���:���#���� ���� "��#����*+��#��#���#"����)'������ �

����������� "��#"���#��#�������#��"������#�����&#�#"���������#5)�5�"��

)�#� �#"���@�)�)A�"��#�'��#�����&#�#"����#������ �����#���#��������"

"�#� �#�����������*+��#�#��#�����&#�#"����#���#"���

Understanding Path Codes at Runtime

����� �������#��������#���#"���"��#���'� ��"������<

� ����� "��#�����" �* �����"�����#

���������"�����#������� ���"#�����&����#���#���������������

��'"����"���������"�����#����"�#����#���#��������"��#�"����

���"�� ��"�#� ������#�����&#�#"�������"��������#���)'�#��#

��&#�#"���������#����������#�������#��#�������'"����"�������'����

���"�����#��#��#����"�����#�"���#��"� ��������������"�����#�

����� ��

� �����#��"���#����"��#��� ���#"����'����;��#����*+��#

����� ����#��"���#����"��#������������&#�#"���������'��#��

�� "��#����*+��#�*�������#�����#��������'�#������"�����#������

�����#������"�����#������� ��

Understanding Path Codes at Development

�������������&���#�����*+��#�'������ �����#���������#����*+��#�3"*�"���#�

���"'������#������������� �����#�����#�������#����#��"��������#��

���#� ��*+��#����#������������&���#�#����*+��#�'���#���� ���#"���@*�#�

��#�*�������'" �����A��������#������������������ ����#��"���#��

�"��#������������&#�#"���"�#����"�������� ��#���#����� "��#����*+��#�

�������������&�"������*+��#���������#����*+��#�3"*�"���#�����"'������#�

����������� �����#�����#�������#����#��"���#�����&#�#"����"��#���'��

��"���#���� �#����� "��#����*+��#�����#��� ���#"����'�#������#� ��*+��#�"�

��"���#��� ����#����*+��#�

Page 15: Cnc - Jdedwards Xe

2–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Working with Path Codes

E����������#�#�����#����#�������#����� ����#�#��������������#�����"��

"�#� �#"��������#�&�"��#�"�����#�����"*������#����������#��������������#�

����#���������'"�"#"�������������������������#�������������#�� �����"'�

��#�"���*+��#�3"*�"���#�* ��

����#���'� ��"���'��"�'���#"����*��#����"�����������#������<

� $��"�����������#������

� ���#"�������#���������'"�"#"��

� 9��"'�"���#�* ��'��#���������#������

Adding a New Path Code

��"���"�#� �#"�����������#���������#�������@2�! A��E����������#��

"�'���#"���'���#�"���#�������#�����#�����#�������@�������?! A������

���"�����������#��������� ���������*������"����:"#"����*+��#��������'��

���������#"�����#��������E������������'��������:"#"�����#��������E��

�����#�������������#��������"#�����"����� �#���#��'��*+��#�

����'� ��"���"��������"����'�#���#����������#��������������#��������-�

�:��� ���������#���������#�������"��?! �

��������������������

/� ���#���������"��#������������� �����#�����'������������#�

������-���:��� ������#�����"��#����� ����?! �

��������#� 5�*+��#���#���������� �������������"�#����"��#�����#�

���#������ �����#����������2�! ��"��#������������� �����#

�������#�"��� ��'�#�������� ���*+��#�@"�� ��"���*�"���'���#"��

���������"�� ����'" ����*+��#�'" ��������33A�����#���������&����

.��#�"��"��#�������#��� �#��'�����#"����������#� 5�*+��#��"��#�"��

����������#������ �$����"��#��� ����� ����� ����������

�� �����#����*�"��#�"���'�#���2�! ���#�������"�#��#��������"��#��

@�?! A�#��#��������#���

Page 16: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

2–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ���#����������� �����H3���#�*���@��"������#���"G���'������:"#"��

��� �����H3���#�*��A�#���� �����#��'����#� 5�*+��#����"'"��#"���'�

#���������#��������%����*��#��#�#������#� 5�*+��#���#�*��������#�*�

������$�,6�������"���

6� ���#��������#�* �������'��#��������#��'����#� 5�*+��#����"'"��#"��

@�?! A�

8� 9��"'��#����*+��#�3"*�"���5��#�#����#�" �@-=�>/A�����?�"���3"#

@-=� �8/A�#�* ��'��#��������?! ���#�������

��������������%� �������#�������#������

>� ��������������#"�����#�������@2�! A��#��'����#� 5�*+��#

���"'"��#"���#��#��#���#�*���

!� ?�"'��#��#�#���"�#� �#"�����������#�������������� ����#�������'�

#������ �����"������#� 5�*+��#���#�*���@���#� ��*+��#�5��?! A��)'

#���������"����#����#��#�"���#��������������#����#��"#�

������������&����&��������

�� ."���#����*+��#�2�#��9�#������"'��#����?! ���#���������'"�"#"���

?�"'��#��#�#������ �����#���#��������'"� �����"'"������������#�

�����'��#������ �����"������#� 5�*+��#���#�������@�?! A��?�"'�

#��#�#���3���#"�����������������2�#��'"� �����"'��#��� ���#"����'����

�����?! ���#�������

�������������#������&���������

=� ?�"'��#��#�#������&������'"�"#"���@�?! I$������?! IBA��:"#�#��#

�������"�����"#��#���"�#� �#"���

���� ���������������������&�� �������������"��#����������������������

/�� ������:"#"������&����'�������2�! ���#�������#�����������?!

��#��������9��"'������������#����������&����)1-�'" ��*�������"���#��

��#��������"��#�"��#��*��#��#��'�����������#�������

����������'�� ��"��#����������������������!

//� ?�"'��#��#�#���"�#� �#"�����������#���#����?! ����"�����#��)'���#�

���#��#������"�����#�*������"�������:"#"������"�����#��9�&����

�����������#�����#�������#��#���������#�������

�������������(�����������%����*���������#������������"�����#

#��������J������'" ��*�'���#������"�����#��" �*�����" �* ��'�

� ��#"�����������"�����#������� ��

Page 17: Cnc - Jdedwards Xe

Working with Path Codes

2–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

/�� 9��"'�������*+��#����'"���#"���9����������"���'��#������

���"�����#��-��#�* ���������#��#������"������#� 5�*+��#���#�

���������������#��#���"�#�#���#�* ��#��#������ �����#��

���#� 5�*+��#���#��������9���#���?�"���3"#�#�* ��@-=� �8/A����

2���"�����#"�����:#�#�* ��@-=� �>A�#����"�#�#��#������#� ��*+��#�5

�?! ���#��������E����" ����#�#�����'�� #���#�������#��*��B�"��

��#��5���#�

������9�������#���#��"���#��� ���#"����'�#���-!=�!K��"��#�* ��

������� �����#���#���������#��"���#��� ���#"����'�#����#�* ��

��"���"�� ����#������#� ��*+��#����"'"��#"���#�* ��

��������������#�#�� �$���������������������

Path Code Naming Conventions

���������������������#��������*�����#���*����#���'� ��"������"��

������#"��<

� 3"�"#���#��/�������#�

� .��������� �

Creating a Path Code Definition

�����*+��#�2�#��9�#��#�* ��@-��=6�A����#�"��� ���#���������'"�"#"���'�����

���'"���#"������"�#�* ���"���"�������#�����#��������

����������������������������

/� -���#������"�����#������@74=�8 A��������2�#�������9�#�

@2=���6�A��������&��"#��2�#�������'���������

Page 18: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

2–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�� ���#�����&��"#��2�#�������'����� "�&�$���

� ���#���2�#�������%��""���'�������� �#��#���'� ��"���'"� �������� "�&

�C�

� 2�#������

� ���"�#"��

� 3���#"��

� ����������2�#�

Page 19: Cnc - Jdedwards Xe

Working with Path Codes

2–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� �#�#������

� 9������#"��

� %� ���

� ��� �����#���#�������

� .1��- ��

����� ���������

2�#������ ����2�#�������"�����"�#��#�����#��'������ ���*+��#�

����"�����#��&����#��&��'��#��'��*+��#�����#��"

���#"����"#�"������� ��

���"�#"�� $������'"��������������&�

3���#"�� -���� ���#���3���#"���"��"��#��#�������"���@�����

� "��#A�

-������� ���#���3���#"�����9���"���C���"��"��#��#��

������'�#�������"������#�����#��&�@�����

��&#�#"��A�

����������2�#� -���� ���#�������������2�#��-"� ��"�����*��#��

���"�����#�#����#��"���#��� ���#"����'�#�������#

����

-������� ���#�"�'"� ��"��"��#��#���������"��#���'�

#�"�2�#�������������*+��#�#��#����#���������'" �����

�" �*��'�����"��#�"���#��

�#�#������ ��"��������#��"���#���#�#���'�#����'#����"��#��

���� �����#���� ��

9������#"�� ����9������#"�������#�����#�������#���J

����� ���*+��#��" �*��������"���"#��#�������������

����� ���*+��#������9������#"�������*���#��#�#���2�#�

����� ��� ���#��#�� ��*+��#�����&���"�#��#��#���#���"

����#�������9������#"�����#���2�#�������

%� ��� -���� ���#���� �������*������'"����"��#�����'#���

?�"���%���"#���

-������� ���#���� �������*������'"����"��#��

%� ����9�#��

Page 20: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

2–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� ���������

��� �����#���#������� ����� �����#�"���#�������"'�#����"������#������

��#�����#��"#���"��#����"������#������������#�*�

���#���

)���*������������������!�!�!�!�!�!�!�!�!�!�!�!�!� !�!�!�!�!�!�!�!�!�!�!�!�!�!�

��"�'"� ��"��"��#��#��� ���#"���@��#������A��'�#��

���#� ��*+��#�����"'"��#"�����#�������#��#��������

#��#�����#��������-���:��� ���"'��������"�����#�����

2%��::::���#�������������::::�"�#�������#

����� ��� ���� ��� ������ "����#�������'��#��#���#�

�������� ��*�����#� ��*+��#�5�2%��::::�������::::

"�#�������#������ ��� ���� ��� �

.1��- �� ��#��"�������#�����#��#���������#���?� "����#"��

��<

/���E

���#��#�����#���"���� �#"�����#�����#���

���* �� ���@LLA���#���#����#������"'"���"��

'� �����*����"�� �� ���@LA�

����1

���#��#�����#���"���#�����#�� ��"��� �##��

Modifying Tables for the New Path Code

E�����#����"'��#����*+��#�3"*�"���5��#�#����#�" �#�* ��@-=�>/A�����?�"��

3"#�#�* ��@-=� �8/A�#���' ��#�#���������#����������"�� ������� ����#�

��'���#�������&5"�,����&5��#�������"#���� "�����#� ��*+��#�"�'���#"���

��������������������������������������������� �!"#$%

/� ?�"'��#��#�������� ���������#���H3�2 ��.#" "#��'����� ����)�H3,��'�

�H3��������#�����������

�� %���#���'� ��"����H3���������#����&����*��&����'�#����B�B! �-=�>/

#�* �<

�����������

CREATE TABLE F9861SAV AS SELECT * FROM OBJB733.F9861;

����&�'�(��

SELECT * INTO F9861SAV FROM OBJB733.F9861

Page 21: Cnc - Jdedwards Xe

Working with Path Codes

2–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� %���#���'� ��"����H3���������#����#������������#��'��B�B! �-=�>/<

���������������&�'�(��

SELECT COUNT(*) FROM OBJB733.F9861;

6� %���#���'� ��"����H3���������#�����#��������#�* ���"#�����*�#��'

#�����#��-=�>/�����<

�����������

CREATE TABLE TEMPF9861 AS SELECT * FROM OBJB733.F9861;WHERE SIMKEY = ‘DEPLOYMENTSERVERNAME’AND SIPATHCD = ‘PD7333’;COMMIT;SELECT COUNT(*) FROM TEMPF9861;

����&�'�(��

SELECT * INTO TEMPF9861 FROM OBJB733.F9861WHERE SIMKEY = ‘DEPLOYMENTSERVERNAME’AND SIPATHCD = ‘PD7333’

8� %���#���'� ��"����H3���������#�����"'��#���#�������-=�>/�����

'��#���������#������<

�����������

UPDATE TEMPF9861SET SIPATHCD = ‘DV7333’;COMMIT;

����&�'�(��

UPDATE TEMPF9861SET SIPATHCD = ‘DV7333’;

>� %���#���'� ��"����H3���������#������#�����92-=�>/������#�

�B�B! �-=�>/<

�����������

INSERT INTO OBJB733.F9861AS SELECT * FROM TEMPF9861;COMMIT;

����&�'�(��

Page 22: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

2–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

INSERT INTO OBJB733.F9861SELECT * FROM TEMPF9861

!� %���#���'� ��"����H3���������#����"'��#������*"����#�#� �"�����#�'�

#���/������<

���������������&�'�(��

SELECT COUNT(*) FROM OBJB733.F9861;

�� %���#���'� ��"����H3���������#������#���#�* ����92-=�>/<

���������������&�'�(��

DROP TABLE TEMPF9861;

=� %���#���'� ��"����H3���������#������#���#�* ��-=�>/�$?<

���������������&�'�(��

DROP TABLE F9861SAV;

�������������)������������ �!"*+,$%�����

/� ?�"'��#��#�������� ���������#���H3�2 ��.#" "#��'����� ����)�H3,��'�

�H3��������#�����������

�� %���#���'� ��"����H3���������#�����#����*��&����'�#��

�B�B! �-=�>/�#�* �<

�����������

UPDATE DV7333.F983051SET VRMKEY=‘DEPLOYMENTSERVERNAME’,VRENHV=‘DV7333’;COMMIT;

����&�'�(��

UPDATE DV7333.F983051SET VRMKEY=‘DEPLOYMENTSERVERNAME’,VRENHV=‘DV7333’

Page 23: Cnc - Jdedwards Xe

3–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Object Configuration Manager

����� �����* ������#���"#"*�#����#������ ��"��"����������#��#���#"�"G�

*�#��#���������'�#�����&#�#"�������#�����#��"�#��"#���'�#����������"

���"��������"#�<

� - �:"*" "#��"����#��"�"�������������#"#"��"����������$��;�"����#

�������������������#"#"���#����#���;�"�& ��������" ��#�����#����

�����

� )������������"���"���#�����#������ ��"���*+��#�#��#�����������-�

�:��� ���"'����������� ���������#�������������������� ������ ��#��

��#������ ��"�����������#��;��#���"����������" �*" "#���3�#����������

������#�#��������������� ������������"����*�#��������

� 7��#��'��������#��"���#����E����#�������*���� ���������

�����*����������� ��� �������#��������*+��#�������#����#���"�

���#"�� ����� �����*"��#"���

���&����#��&��'��������#���"������������ ��"������"��������

����� �������#�� ��� ���#����*+��#����'"���#"���9������@��9A����9

���* �����#�����"'����#������ ��"������"��� ���#"���

��"���#"������#�"��#���'� ��"�������#�<

� .���#���"���#����*+��#����'"���#"���9�����

� ��&"����"#��#����*+��#����'"���#"���9�����

� %���"����*+��#����'"���#"���9���������#

� 2�#"#"��"������ "��#"��� ��"��������

� B�"���'���#"�������"�����* ��

Page 24: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Page 25: Cnc - Jdedwards Xe

3–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding the Object Configuration Manager

�����*+��#����'"���#"���9������@2=�>//�A�#�� ����'"�����"#"*�#��

����"���������#�������"�� ���"#���#�����������"����������"������#��

���"�����#�����#�������#����*+��#����'"���#"���9��������"�#�#��#��

����#� ���#"���'��#���'� ��"��<

� ��#�

� B�#��������

� B�"���'���#"��

�����*+��#����'"���#"���9������#���"�'���#"���"��#�* ��#��#�#�

����� ���������#���"����������������"���������$#���#"���

����� �� ��&�#��#����*+��#����'"���#"���9������#����#��"���#������#�

��������"��� ���#"���

)#�����*���� �'� �#��#�"�&��'�#����*+��#����'"���#"���9������������ "�����

�"��#"���#�''"��������������#��������#�������"��#����� ����*��#�

���"���������������� �

����'� ��"�������"��" �#�#��#����*+��#����'"���#"���9�����<

ObjectConfiguration

Manger

AS/400HP 9000RS/6000

Compaq AlphaServerWindows NT

Sun

AS/400HP 9000RS/6000

Compaq AlphaServerWindows NT

Sun

AS/400HP 9000RS/6000

Compaq AlphaServerWindows NT

Sun

Workstation

Page 26: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

)������� ���*�"�����#���*+��#�@#�* �A�����#����#�*�����#��������B�#��

����������*�"���'���#"�������#������"�����#�������

E���� ����������#� ��#�#����*+��#����'"���#"���9������#�* �<

� ����#�* ��'��� ���&#�#"�����#���#�"�#�* ��"�������#� "G����#�����#�

������1��� ��������#� ���#������#��������#�����#��������)'

#������#� �����"������" �* �������� �� ��&�#��#�����&#�#"��J

+���"�"�'" ��'������������ ���#"���

� ����#�* ��'������� ��"������������������"''���# ��#���

��&#�#"����-���:��� ���#�������������#�������'������� ��"�

����#�������#���*+��#����'"���#"���9������#�* ��'�����

����"���

See Also

� %#���������#����������������"��#��������������������������

Examples of the Object Configuration Manager

����'� ��"�������:��� ���'�����#����*+��#����'"���#"���9��������&

�"#�<

� $�� "��#"����;��#�'����#�

� $�� "��#"����;��#�'�� ��"�

Application Request for Data

����'� ��"���" �#�#"���"�����:��� ���'�����#����*+��#����'"���#"��

9��������&��"#��������� ���#���;��#<�

����'� ��"���#���" �#�#������#����*+��#����'"���#"���9��������&��"#�

������� ���#���;��#�

Page 27: Cnc - Jdedwards Xe

Understanding the Object Configuration Manager

3–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Application Request for DataServer

FinancialLogic

FinancialData

SystemData

Source

Manufacturingand

DistributionData

ManufacturingandDistributionLogic

OneWorld ProcessJDEBase

JDENet

OneWorld ProcessJDEBaseJDENet

OCM

WorkstationOneWorld ProcessJDEBaseJDENet

Step 3Step 1

Step 2

�#���/<�$���#"��������� "��#"����;��#���#�������� �� ��&�#��#����*+��#

���'"���#"���9������#�* ��@-=�>/�/A�'��#�����#��������'�#��#�#�* ���-�

�:��� ������#�����&��"#��2����������'�����������#��������"#�"�

"��#���H���5*�5�:��� �� "�������#����� "�&�-"����B�'����#"��"���#��

"�'���#"��������� ��'"#����#�� ���#��#���#�* ��"����"���#���"�'���#"��

@����A��"����������#��#������� �����#����*+��#����'"���#"���9�����

#�* ��#����#��"���#�������#���#�������

�����"�������";���"���:�#��#����*+��#����'"���#"���9������#�* ��"�� ���<

� ���"�����#��������2�! ����?!

� .�����"���"��"#��������"'"�����)���������)�����K2.B3)�

� �*+��#�1�����������-�/�/��B6�/�������%�=��/

� ��#�*���2�#�

����'� ��"���#�* ������#����;���#"� �������"������#��#�#����*+��#

���'"���#"���9���������#�� ���#��#�������#���#�������'������#���;��#�

-��#�"��:��� �<

� �������"�����#�"�2�! �@�����#"��A

� ����#�#��"�$?�@��#"��A

� �����*+��#�#����"��B3��@#�* �A

Page 28: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ���������-�����

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

������ ���ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

.�������/���ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

�������0������ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

/ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

-�/�/ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

�)8!68>>=�@��

)�A

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

)�#����������

'��#��������

���"�����#�

#�#����#"����#���

�B3��'��#��

������#�* ������

#������"'"����M

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

-�/�/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

�����3�@����

)�AÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

)�#����������

'��#��������

���"�����#�

#�#����#"����#���

�B3��'��#��

������#�* ������

#������"'"������MÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

-�/�/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

K2.B3)� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

)�#����������

'��#��������

���"�����#�

#�#����#"����#���

�B3��'��#��

������#�* ������

K2.B3)�M

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

6 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

��-$.3� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

�)8!68>>=�@��

)�AÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

)�#����������

'��#��������

���"�����#�

#�#����#"����#���

�B3���"#����

������#�* �

@��'�� #A������#��

���"'"����M

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

8 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

��-$.3� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

�����3�@����

)�AÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

)�#����������

'��#��������

���"�����#�

#�#����#"����#���

�B3���"#����

������#�* �

@��'�� #A������#��

���"'"������M

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

> ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

��-$.3� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

K2.B3)� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

)�#����������

'��#��������

���"�����#�

#�#����#"����#���

�B3���"#����

������#�* �

@��'�� #A�����

K2.B3)�M

�#����<������#�����#�������"���#��"���������� ������#�����'"�"#"����'

#��#���#�������@#��#�"����#�*����� �#'��������"���������������#�#"�������

"*��A�#�����B���

Page 29: Cnc - Jdedwards Xe

Understanding the Object Configuration Manager

3–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�#��� <����B��������#��#����H3�#�#����#�#��#�"������"�#��'��#�����#�*��

*�"����� ����������&��"#��#�"�5��#��������"��#"����'#����#��'�#���#��

��#�������#���"#�#������� ��

����-��#��� "*��� "#�#�* ��@-��=�A��#���������"������� "�"��#��#�����

�����)���)'������ ��������'�����������#�'"��������)���"#������

K2.B3)�����#�#��������)�����"�"�*������'��#���-��=��#�* ��#��������)��"

��#��'�#��������������#������)�����"��������#��#�"'������ �������#

'"���#������)��"#��" ���#�'"���#��������)��"��#��#���������

Application Request for Logic

����'� ��"���" �#�#"���"�����:��� ���'�����#����*+��#����'"���#"��

9��������&��"#��������� � ��"���;��#<�

Application Request for LogicServer

FinancialLogic

FinancialData

SystemData

Source

Manufacturingand

DistributionData

ManufacturingandDistributionLogicOneWorld Process

JDEBaseJDENet

OneWorld ProcessJDEBaseJDENet

OCM

WorkstationOneWorld ProcessJDEBaseJDENet

Step 3Step 1 Step 2

�#���/<������;��#������'����� "��#"��� ��"��"�"�" ��#����#���;��#�����

�*+��#����'"���#"���9���������#� ������� �*�"���'���#"�������*�#��

����������������

-���:��� ��������������������������������������#�#��#��� ���*�"��

'���#"��� ��&�#��#����*+��#����'"���#"���9������#����#��"��������#�

�����#��#�*�"���'���#"����$'#������� "�&��C�#������ �#���������������

#�������� ��������� �����#��*�"���'���#"���#���� "��#��� �"�'���#"��

���������#���#����#"��������� �����������#����*�"���'���#"��

��� �������#�������

�����"�������";���"���:�#��#����*+��#����'"���#"���9������"�� ���<

Page 30: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ���"�����#��������2�! ����?!

� .�����"���"��"#��������"'"����,�����)����K2.B3)�

� �*+��#�1�����������-�/�/��B6�/�������%�=��/

� ��#�*���2�#�

����'� ��"���#�* ������#����;���#"� �������"������#��#�#����*+��#

���'"���#"���9���������#�� ���#��#�������#���#�������'���� ��"���;��#�

-��#�"��:��� �<

� �������"�����#�"�2�! �@�����#"��A

� ����#�#��"�$?�@��#"��A

� �����*+��#�#��������*���"#�����*�#��������@.B�A���*�"���'���#"��

@B�-1A

���������-����� ������ ��� .�������/��� �������0������

/ B�=���6= �)8!68>>=�@���)�A )�#�����������'�#�����������"�����#��#�#���#"����#����@.B���B�-1A�'��#���������*+��#�����#������"'"����M

� B�=���6= �����3�@����)�A

)�#�����������'�#�����������"�����#��#�#���#"����#����@.B���B�-1A�'��#���������*+��#�����#������"'"������M

B�=���6= K2.B3)� )�#�����������'�#�����������"�����#��#�#���#"����#����@.B���B�-1A�'��#���������*+��#�����K2.B3)�M

6 ��-$.3� �)8!68>>=�@���)�A )�#�����������'�#�����������"�����#��#�#���#"����#����@.B���B�-1A��"#�����������*+��#@��'�� #A������#�����"'"����M

Page 31: Cnc - Jdedwards Xe

Understanding the Object Configuration Manager

3–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���������-����� �������0������.�������/��������� ���

8 ��-$.3� �����3�@����)�A

)�#�����������'�#�����������"�����#��#�#���#"����#����@.B���B�-1A��"#�����������*+��#@��'�� #A������#�����"'"������M

> ��-$.3� K2.B3)� )�#�����������'�#�����������"�����#��#�#���#"����#����@.B���B�-1A��"#�����������*+��#@��'�� #A�����K2.B3)�M

! )'�#����"��������'��#�"��*+��#�#����#��������� �������#����������#����&#�#"���

�#����<������#�����#�������"���#��"���������� ������#�����'"�"#"����'

#��#���#�������#�����1�#�

�#��� <����1�#�������������#��#�������#��*��"������"��� ��"�������

���1�#����#����������"���#����������������� ����������#������

������#��#���������*������"���#����;��#��� ��"���*+��#�

Page 32: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Page 33: Cnc - Jdedwards Xe

3–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Working with the Object Configuration Manager

�����*+��#����'"���#"���9���������"���#���' �:"*" "#��#��������#���*�#��

��� "��#"��������*�"���'���#"���#������#����������"�� �������#�

����"��#����������� ���"#"*�#�������"����-���:��� ���������� �����

#�* ���*+��#�#����#�*�����#����������� ��"���*+��#�#������"�����#�������

E�����#�������#� ��#�#����#��'�#����*+��#����'"���#"���9������������#�

������9�#��#�* �<

��������1���2��3������ �����*+��#����'"���#"���9������������#�������

9�#��#�* ��#��#������ �����'����&#�#"��

����"������#����"��#������#� "G����#�����#������

���� ��&��#���������#��"�������)'�#����#�����#�

�����"���#����" �* �������� �� ��&�#��#��

��&#�#"��J�+���"�"�'" ��'������������ ���#"���

����4�����5������6�� �����*+��#����'"���#"���9������������#�������

9�#��#�* ��#��#�#��� ��"������������#�������#��#

����"��#�������������#������������� ��"�����

#�����;�"��"#���������������#�������

)������� ���*�"����*+��#��������#�����'"�����"#"*�#�������"������

�"#"*�#�����#���#���#"������"����'"���#"���"���'"����*������*+��#

���'"���#"���9�#��#�* ��@-=�>/�/A��E���������&��"#��#��������*+��#����

#�����"'��#�����#"��"��#�"�#�* ��

��&#�#"�������"������#����"�������#� "G����#�����#�������������*+��#

���'"���#"���9�#��#�* ������*��#�����#��"������"�#�������#��#����

"��#�������������#���������������#��"�������;�"��������#�����

������#�������

��������#������&#�#"���������#��"����������"����� ��"���*+��#�����

�"''���#������#"����'��������#����� ��*���#"������-���:��� ��

��������������������#��#�'����&#�#"����������������'"���������#�

��� ��� ��������#�"�"�#������������&#�#"����;��#"��������'"��������

���"#��*+��#����'"���#"���9�#��@"��#����#�����#������A���"�#"���#��#��

��� ���#�*���

����������#��"������"��;��#"��������'"���������� ��"�� ��"#���&����

����'��#�����#��"������#�� ��&�#������&#�#"���'��#�"�"�'���#"���

����'����#�����#��"��������� ���������";�������"���'�������'"���

Page 34: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���������������"�������#����"��#����*+��#����'"���#"���9�#��#�* �

@-=�>/�A�"��#�������������#�������

)'������������������#����*+��#����'"���#"���9�#��'��#�����&#�#"�������

��� ������&�#����*+��#����'"���#"���9�#��"��#�����������#�����"'�#���

��� ��� ��*�����������-���:��� ���"'�����������������"�����#��"#�

��";�������"���'��#�����&#�#"����������� ������&�#�����"'����������

�;�"���"��#����������"�������"���'��#�����#��"������

�����*+��#����'"���#"���9������� �����"���*�#���������#���� ���"#�

#������"�"#�#"����'������*+��#�����"�����������������'�������#�&

�������"��������#"��������"���������� �#"����*+��#����'"���#"���9�����

�����

�����*+��#����'"���#"���9������@2=�>//�A���� "��#"�������#��#����*+��#

���'"���#"���9�#��@-=�>/�/A�#�* ���

��"�����#�����#�"��#���'� ��"���#��"�<

� 9���"����*+��#

� �*+��#����'"���#"���9����������"�����#"��

� 9���"�������"��#�:#

Mapping Objects

E��������*+��#�*�����"�����#��E���� ��#�������"�����#����������� ����

���#�����������#��#����"�����#J��*+��#�#��#�����#��������������#�#���

�*+��#�#������E��������#���'�� #�����"���'��� �"�#������'�����*+��#�#����#�

������#������������������������"��"�"��� ��*+��#�#����#�������

Page 35: Cnc - Jdedwards Xe

Working with the Object Configuration Manager

3–13OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

7���5������������

�������7��

������#������'�� #�����'������*+��#�#��������#���

����"���������*+��#������"�#��� "#�� ��� ��<���-$.3��

�������#������*+��#�#����@�������B3�A���������#�

�����@������#����� "��#��� ��� ���#������A��B�

���#"�������'�� #�����'��#����*+��#�#�����B3�������#�* �

�*+��#���#��������"��"�"��� ����� ����"�#�#��#��

��'�� #���#�������

7���5�&���6�����

������

E�����������"��"�"��� ��*+��#��"#�"��������"�����#�

-���:��� ��������������������"'"��#�* ���������#��

����"#����&*�������* ��@-��=8�A��#������#��������#��

#����#�����'�� #��������#��#����#�����#�������

)'����������#��:� "�"# ����������*+��#�*�������"��#��

�*+��#����'"���#"���9������������ �����#�����'�� #

����'��#��#��*+��#J�#����

0���������������"�����#���#����������'�� #�����'���B3��@#�* �A��*+��#�'�

#���K2.B3)�������'" ��*������#����"����"�����#���'�� #� ���#"���'��#�* �

�*+��#��)'�#�* ���*+��#������#����������'�� #��������������#��:� "�"# ��������

*������������� ������������� ��#,-�" ������������

B�#������ "��#"�������*�"���'���#"�����#���#"�� ����� ��� ��"'�#����"���

��'�� #�����'��#��#��*+��#�#����

���� �#��#���'� ��"���#�&<

� 9����*+��#

� �������#�������"���'������*+��#�3"*�"���#�* �

� .���#��#������ �������#��#�* �

������������

-���#�����#���$��"�"#�#"������ ������@74=�//A���������*+��#

���'"���#"���9������@2=�>//�A�

����9���"��������������� ��#�'������������"�'����"� �����#�

�����#��#������#�����9���#��������'"� ������&������#�����#�������

%��""���'���

Page 36: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–14 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

������#�����#�������#��#�#���#����*+��#����'"���#"���9������#�* �

�"#����"����������#�#����&������� "�&��� ��#�

��������"����������:#�#��#�����#�������"��#����"���'��#��#��

����"��������#�����#��������"������&#�#"������#����#�����#�

�����'��#��"�����"�����������#��"���������"#������������

��#�������

������&��"#���*+��#�9���"���'�������������#�"�'����������

���#����#�������'����"���#����"���*+��#�����"��������������'��

����������������������*+��#�����"���'����#�������

Page 37: Cnc - Jdedwards Xe

Working with the Object Configuration Manager

3–15OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� "�&�$���

�����*+��#�9���"���%��""���'�������������#�"�'�����������"'�

#�����#�������#����"��������*+��#�����

���� �#��#���'� ��"���'"� �<

� ���"�����#�1���

� �*+��#�1���

E���������'"��������#��'��� ��*+��#�"������#�������*��#��"��

��-$.3��"��#�"�'"� ��

� 2"������#�������

�����"������#�������#��#������ ��#���#�*���� "��'��#���#���

�'��*+��#�#��#����������-���:��� ������������� �������*+��#��'

#�����B3������7��#������#�*�����#���������������������� �����

�*+��#��'�#����B�-1�#���� ��"����#�������

� .�

� �*+��#�����

���� �$�������������������������������� ������'�"�'���#"����*��#��� "��#"���#����B3���*+��#�#����

� ��#��������9���

E������ ���� �����#�������������#�������'��*�"��

'���#"���@B�-1A���#�������

Page 38: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–16 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� �����������#�������

� $ ���HB�

� "�&��C�#�����������*+��#�����"���

E����������#"����#�������*+��#��� "�&"����C��'#�����������"����B����

#��� "�&��C�#���������� �#�#�����"����#����� "�&������ �#���:"#�#���'��

�����#���#��#�����&��"#���*+��#�9���"���'���

���#�����&��"#���*+��#�9���"���'�������������"'��#��#�#����*+��#

���'"���#"���9������������#������������"#�����"���#"���#�#�N�#��

�*+��#��#�#��'"� ���"� ���1$�@"���#"��A�

�����&������������#"�������#�����&��"#���*+��#�9���"���'���

������#������������'���#���%�����������������������#�#������

�*+��#��#�#��'"� ���"� ���$?�@��#"��A�

����� ���������

���"�����#�1��� -���� ���#������"�����#������"�� ���� ���#���2 ��

1��������"�����#����";�� ��"���#"'�����������

���"�����#�'��)�#� ,%�"�#� �

-������� ��@)�#� �$�� "��#"��A��#������"�����#

�����"�� ���� ���#���2 ���1��������"�����#����";�� �

"���#"'���������������"�����#�'��)�#� ,%�"�#� �

-������� ��@���"�����#���?�"���$�� "��#"��A��#�"

"�#�����#�������#��#�"���#"'"��#��� ���#"����'�#��

��� "��#"�������"������"'"��#"�����#��

�*+��#�1��� ��������� �����"#��#���"��*+��#5*�������"�����

#��#��"��#���'#�����*+��#����#���*�" �"���* ��&�'�

� ���� "��#"��������#��#����� ������������#����*+��#

"���� #"� ����� "��#"����������*+��#�"�#����"��#��

�*+��#�3"*�"�����:��� ���'������ ���*+��#�"�� ���<

� B�#���$�� "��#"���@���������#A

� )�#���#"���$�� "��#"��

� B�"���?"��

� B�"���-���#"��

� B�"���-���#"�����#���#��#��

� ����#�%� �

� 9��"���*+��#���#���#��#��

)���*������������������!�!�!�!�!�!�!�!�!�!�!�!�!� !�!�!�!�!�!�!�!�!�!�!�!�!�!�

���#�"�'����#�"�"�#�������� ���*+��#�#��#��������#�#�

�����������#������'�� #�����'��� ��'�����*+��#�#����

��#��#��� "#�� ��� �����-$.3��"�#��#�"�'"� ���#������#�

����*+��#�#����"�#��#����*+��#������'"� ��

Page 39: Cnc - Jdedwards Xe

Working with the Object Configuration Manager

3–17OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� ���������

��#������� ������#������������

)���*������������������!�!�!�!�!�!�!�!�!�!�!�!�!� !�!�!�!�!�!�!�!�!�!�!�!�!�!�

��#����������#���*�" �"���* ��&�#��#��������#���#

���������� ����#��"�����'"���#"�����������'"���� ��'

#�����#�*����;�"���@���������#�* ���"��A������

�'�#��� ��"������"���@���������� ���:���#�� ��"�

�*+��#�'��������#��"�A�

)'������ �������#�'"��������"������#��������

�����#�'"���#�����#��"#���"�������"������#��������"#

�" ��##���#�#��������#�#����������������#�������

.��� �,7��� $���'" ������#��� �"'�����"�#�������'�����"#�

�������������� ��'�����#"�����.��� �,7������

��'� ��<

� ����J� �,7���J���'" ����#�*��"���"#��K���#��#

"#�������#����' "�#��"#��������#�����'" ��

� ����J.��� �,7���J�'"� ����#�*��* ��&�����

��#�"����������������'" ��

)���*������������������!�!�!�!�!�!�!�!�!�!�!�!�!� !�!�!�!�!�!�!�!�!�!�!�!�!�!�

���#�"�'��������������#�����"��"�"��� �����������

��������#��� "#�� ��� ���K2.B3)��

�*+��#����� ����#�����'��*+��#��"#����"������������&"����-�

�:��� ���"'����������&"����"#��#�* ��#����*+��#�#����"

�B3�����*�"���'���#"���"�B�-1�

)���*������������������!�!�!�!�!�!�!�!�!�!�!�!�!� !�!�!�!�!�!�!�!�!�!�!�!�!�!�

E�������������#��@�*+��#�#�����B3�A��*�#������ "��#"��

@�*+��#�#����.B�A��*�"���'���#"���@�*+��#�#����B�-1A�

������"��#�:#�@�*+��#�#����7�A�

��#��������9��� )��"��#�����#�������� �����#����"�����

����������#��������?� "���� �����<

2 2"����

� ����������E������ ���� �����#�"�'��*�"��

'���#"���@B�-1A���#�������

��#������� ����� �����#�"���#�������"'�#����"������#������

��#�����#��"#���"��#����"������#������������#�*�

���#���

$ ���HB� .��#�"�' ���#��#����1����--���5 ��� ������ ��&"��

'��#�����#��������E������ �������#�"�' ���#������1

#���� �������#���#�*���"�#��"#��"�������B$��

�"�� ��������#�"�' ���#����#��"������#�������#�#�

�����5 ��� ������ ��&"���

Page 40: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–18 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�������5���������5����������������������������

-���#�����#���$��"�"#�#"������ ������@74=�//A���������*+��#

���'"���#"���9������@2=�>//�A��

����9���"��������������� ��#�'������������"�'����"� �����#�

�����#��#������#�����9���#��������'"� ������&������#�����#�������

%��""���'���

������#�������"���������#�������'��#����*+��#����'"���#"���9�����

#�* ���������#�#����&��"#�������� "�&��� ��#�

������#��������"������#�������"������&#�#"������#����#�����#�

�����'��#��"�����"�����������#��"���������"#������������

��#�������

������&��"#���*+��#�9���"���'�������������#�"�'��������������

������"���*+��#�����"���#����#�������

-���#���-���������������%��"���3����

����%��"���3���#��������'�������������#�"�'���������'"���#��

��������"���'��#����*+��#�3"*�"���#�* ��

������������������'�#����*+��#�3"*�"���#�* �������� ���� "��#�

������#"��#�������#��#�� ����"�����#�*�������#���������#������

�����#��"��*+��#�3"*�"���#�* ���������#��#���������#�������

����� ��� �#������"#��������������"'��������������*+��#

3"*�"���#�* ��#���"''���#���#�������

���� �#��#���'� ��"���'"� �<

� 2�#������

� �3���#�������

� "�&��C�#������#�����""���#��������#�����������"���

���������� "�&��C������� ����#���#"�� ������#��#����*+��#�3"*�"��

��#�����������"���'����������"�����#�#��#����#�"��#�����#������

������#����"��#���2�#�������'"� ��

����� ���������

2�#��1����5�)�;�"� $��� �������"�������#��#�"���#"'"������#�����"���"��

�;�������'�'���#�'����"��"������ "����'������

"�'���#"���

��#��)#���5��������� .���"��#�����#���"�#"��������%�'������-" ��#����

��#��"#�����"#�������"��#�����#���"�#"�����@�"#���#�'" �

��'":A�

Page 41: Cnc - Jdedwards Xe

Working with the Object Configuration Manager

3–19OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�������������������������������

E�����#�����#��#������ �������#��#�* ��"'����������� ���������������#

'� ���#���#���������"���������#"��������������������������"'����

����������� ����#�������

-���#�����#���$��"�"#�#"������ ������@74=�//A���������*+��#

���'"���#"���9������@2=�>//�A�

����9���"��������������� ��#�'������������"�'����"� �����#�

�����#��#������#�����9���#��������'"� ������&������#�����#�������

%��""���'���

������#�������"���������#�������'��#����*+��#����'"���#"���9�����

#�* ���������#�#����&��"#�������� "�&��� ��#�

������#��������"������#�������"������&#�#"������#����#�����#�

�����'��#��"�����"�����������#��"���������"#������������

��#�������

������&��"#���*+��#�9���"���'�������������#�"�'��������������

������"���*+��#�����"���#����#�������

-���#���%������������������ ��2����

������&��"#����* ��������#���������"G"���'�������������#�"�'��

����������������"��#��������#��'����� ����#������������"'"�

#�* ���E�������� �������#�"���� "��#"���'���#�����#�������

��� "��#"���

Page 42: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–20 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� "�&�-"���#�� ���#��"�'���#"����"#����"���#����&�

E����������"'��#���'"� �����#�"�'���#�������*��� ���� ��� ����#�

�����������*+��#�������E��������#������#��� "�&�-"���"'�����������"��

���������#��

��������'�#���'� ��"��<

� ������������������� "�&��� ��#�

� � "�&�$���

����%��"����* ��������#���������"G"���'�������������#�"�'�������

������"����������#�* ������"���:�"�'���#"���'������#���������#�* ��

$ #���#"�� ������������"� ���#���%��"����* ��������#���������"G"��

'���*������"�����'�� #���#�*���'���#�����&��"#����#�������

'��J�%������������������������#�����-$.3���� ���"���#���#"�� �

��#�����#�#����*+��#�1����'"� ����#��#���'�� #��� ����������'��#��

'����)'������������#����*+��#������'�����-$.3���#���'"� ��#��#����

'��� ��'" ����"#����'�� #��� ������#���'���������

)'�����������"������������#������� �#��#���'� ��"���'"� �<

� ��#��������1���

� �*+��#�1���

E���������'"��������#��'��� ��*+��#�"������#�������*��#��"��

��-$.3��"��#�"�'"� ��

� %� ���

Page 43: Cnc - Jdedwards Xe

Working with the Object Configuration Manager

3–21OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

������"���������#�������� ��#�����#�������'��#�����-$.3�������

'�������"'"���*+��#���"''���#�'"� �����������#���%��"����* ��������#�

�������"G"���'����-��#�����-$.3�����������������'"����� ��#�������

�'�#������ ������������#�* ����"���:���"����4�������'���

���"'"���*+��#�����������'"��������#��������#��������#��'������#�

���'�������� ��#�* ��

-��#�����-$.3����������� �#��#���'� ��"���'"� �<

� ��* ��������1���

� )���:�������1���

-�������"'"���*+��#������ �#��#���'� ��"���'"� �<

� )�"#"� ��#����

� 1�:#��#����

� 2����#�)�������#����

� 9"�"�����:#��#

� 9�:"�����:#��#

������� �������� "��'��*�#��#���#�* ��"�'���#"�������#���"���:

"�'���#"���

�����#�����"���"�'���#"�������������"���'���#���-����������

#���%��"����* ��������#���������"G"���'����@��"���#"���"�� �

���" �* ��'���#�����&��"#����* ��������#���������"G"���'��J�%��

�����A�����%��"����* ��������#�����������"���'���������

Page 44: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–22 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���#���%��"����* ��������#���������"G"���'�������� �#�������"'��#��

'� ��"���'"� �<

� �������#��@E,1A

� ���#����* ��@/,�A

� "�&��C�#���#���#��#������"���'����)'���������� "�&��C�����

�*�;���#�'�����#" ������#���#��#�����#���$��"�"#�#"������

�����

� "�&��C�#������#���"�'���#"���

����� ���������

��#������� ������#������������

�*+��#�1��� ��������� �����"#��#���"��*+��#5*�������"�����

#��#��"��#���'#�����*+��#����#���*�" �"���* ��&�'�

� ���� "��#"��������#��#����� ������������#����*+��#

"���� #"� ����� "��#"����������*+��#�"�#����"��#��

�*+��#�3"*�"�����:��� ���'������ ���*+��#�"�� ���<

� B�#���$�� "��#"���@���������#A

� )�#���#"���$�� "��#"��

� B�"���?"��

� B�"���-���#"��

� B�"���-���#"�����#���#��#��

� ����#�%� �

� 9��"���*+��#���#���#��#��

%� ����1��*� -���� ���#���� �������*������'"����"��#�����'#���

?�"���%���"#���

-������� ���#���� �������*������'"����"��#��

%� ����9�#��

��* ��������1��� ����������'������� ����"����'���������#���#��#��

#�* ��

��* ��)�"#"� ��#���� ���������#��'���� ��������"��*�#����;�"���#��#����

#�* ��"������"�"#"� ������#��'����������:#��#�

��* ��1�:#��#���� ���������#��'���� ��������"��*�#���#��#��" �*�

� ���#���#����#�* �������#������"�� �����������#��'

��������*����'" ���

��* ��2����#�)�����

�#����

$����� �������#��#��#�"��"��#��#������*���'

�����#������"�#�#��#�#�����:#��:#��#��'���� ��������"

��������#��� �#��:#��#��'������#��#����� ���#���#���

#�* ��

��* ��9"�"�����:#��# $����� �������#��"��"��#"���#����"�"�������*���'

����������#�����:#��#��#��#���� ���" �� ���#��#���

#�* ��

��* ��9�:"�����:#��# $����� �������#��"��"��#"���#�����:"�������*���'

����������#�����:#��#��#��#���� ������� ���#��#���

#�* ��

Page 45: Cnc - Jdedwards Xe

Working with the Object Configuration Manager

3–23OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� ���������

)���:�������1��� ����������'������� ����"����'���������#���#��#��

"���:��

)���:�)�"#"� ��#���� ���������#��'���� ��������"��*�#����;�"���#��#�����

"���:�"������"�"#"� ������#��'����������:#��#�

)���:�2����#�)�����

�#����

$����� �������#��#��#�"��"��#��#������*���'

�����#������"�#�#��#�#�����:#��:#��#��'���� ��������"

��������#��� �#��:#��#��'������#��#����� ���#���#����

"���:�

)���:�9"�"�����:#��# $����� �������#��"��"��#"���#����"�"�������*���'

����������#�����:#��#��#��#���� ���" �� ���#��#����

"���:�

)���:�9�:"�����:#��# $����� �������#��"��"��#"���#�����:"�������*���'

����������#�����:#��#��#��#���� ������� ���#��#����

"���:�

Object Configuration Manager Processing Options

�����*+��#����'"���#"���9��������� "��#"���@2=�>//�A������������"��

��#"���#��#����#� �������� "���

Process

��"�����"�����#"������* ������#�����"'�����#���#��"��������"�������

���"��#�������#�#��#�#����B3���*+��#������������"���������#��:"#�"��#��

��#�������#����"��������������"���#���#�* ��

1. Non-existent table error

.��#�"�����"�����#"���#�����"'�����#����������������"������ ��*�

"�����������#�* ��������#��:"#�"��#�����#�������#����"���"#�"��������

?� "���� �����<

/ )���������

B ��& )��������"���

Page 46: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–24 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Mapping Generic Text

����7���"����:#�@-��/>8A�#�* �������������"���' �:"*" "#��#�����#����*+��#�

��"�"�*������#�����#��#����"��#�"�#�* ������"''���#���������'� ��"�����

#�������"��#�:#���#���"�<

� ���������#��#��#�� ����"�����#�����-���:��� �����#���"�#"����

� ��"������*�"���'���#"�����#�����#������������

���"�����#�

� 2����#"�����#�����"'"��#��������"�����#��-���:��� ���"����#���"#��

��#�����������*��&���� ����#� ���#����� ��*���"''���#�'���

�����#"������"�������� �������� #"� �����"�����#������

�����#"����#�#������������������������#��

������5���������

)��#����*+��#����'"���#"���9������������@2=�>//�A�����#���7���*+��#�#���

#���������"'"������"��#�:#��*+��#�

����'� ��"���"�����:��� ���'����#�#����*+��#����'"���#"���9������#�* �

@-=�>/�/A� ��&� "&���'#��"�#� "�������� ���"'�����*�"���'� ���#��

#��"�� ����'"���#"������"��:��� �������� ��#���2�! �@�����#"��A����

��! �@#�#A����"�����#�

��6������� ������ ��� ��������� ���������� ���������

2�! -��/>8 7���"����:#��* �

B�"�����#��52��

�B3�

2�! 7�=���� ��#���"�#"����7 ���

��#���"�#"���� 7�

2�! 7�=�>�$ �*+��#�3"*�"�� �*+��#�3"*�"�� 7�

2�! 7�=�>�$ B�"��-���#"���1�#�

�*+��#�3"*�"�� 7�

2�! 7�=���$ ��#���#��#��1�#�5�#��#��

�*+��#�3"*�"�� 7�

2�! 7�=���B ��#���#��#��1�#�5�#��#������)#��

�*+��#�3"*�"�� 7�

2�! 7�=��923 9��"���*+��#���� �#�

�*+��#�3"*�"�� 7�

��! -��/>8 7���"����:#��* �

B�"�����#��5��#

�B3�

��! 7�=���� ��#���"�#"����7 ���

��#���"�#"���� 7�

��! 7�=�>�$ �*+��#�3"*�"�� �*+��#�3"*�"�� 7�

Page 47: Cnc - Jdedwards Xe

Working with the Object Configuration Manager

3–25OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��6������� ���������������������������������� ���

��! 7�=�>�$ B�"��-���#"���1�#�

�*+��#�3"*�"�� 7�

��! 7�=���$ ��#���#��#��1�#�5�#��#��

�*+��#�3"*�"�� 7�

��! 7�=���B ��#���#��#��1�#�5�#��#������)#��

�*+��#�3"*�"�� 7�

��! 7�=��923 9��"���*+��#���� �#�

�*+��#�3"*�"�� 7�

Page 48: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–26 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Page 49: Cnc - Jdedwards Xe

3–27OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Running Object Configuration Manager Reports

Running Object Configuration Manager Reports

�����*+��#����'"���#"���9���������"���*�#���������#��#���������

���#�#���� ������&����#��&��'���������"���

������*+��#����'"���#"���9���������#������ ������������������#��#

���#�'���#�������� ���������#�����9����#������ ���'��������#

�"���+�*��$ #������#��������� #�"�#��������#������������"''������"��#��

���������#�����"�����#"���������#��� ��#"���'����*�#���������� ��

'��������#��"���

����������#�"��� ���*�����"��������"�����#"�������#�'���#������#

'��� ����#�#��#���� ��������'���#����"���

-���:��� ���#���%=��>//$��"����� �#���9���"��������"����7 �*�

.���#�����9��� �#���������9���������#�

$�����#��� ��#"���'�������#���#�*����#����'��#������"'"�����#����#�'��

#����"�������������'"�"����#�"�������"�����#"���������#��� ��#"����"'

����������������#������#�'���#����"���

��"�����#�����#�"��#���'� ��"���#��"�<

� ��##"�������"�����#"���'����9����#

� 2���"�����#"��<���9�9���"��������"����7 �*� �.���#����� �#�+��������

� %���"���#����*+��#����'"���#"���9���"��������"������#

� %���"���#����*+��#����'"���#"���7 �*� �.���#�����#

� %���"���#����*+��#����'"���#"����� �#�����#

� %���"���#����*+��#����'"���#"�����������#

� %���"���#���?�"'���*+��#����'"���#"���9���������#

� 2���"�����#"��<�?�"'���*+��#����'"���#"���9������@%=�>// �A

� %���"���#����*+��#����'"���#"�����#�����* ��.���#�����#

Page 50: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–28 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� 2���"�����#"��<���#�����* ��.���#��@%=�>/�/$A

� %���"���#������#����9�%�����'��B�"���-���#"�����������#

� %���"���#�����*�9�#���� �#"���B������� �����#

� 2���"�����#"��<���*�9�#���� �#"���B������� �

� %���"���#�����9���#�����.���#�,�� �#�����#

Setting Processing Options for OCM Reports

����'� ��"���#�&����"*������#����������#��"���#���#�����"�����#"��

'������#����������#������'� ��"�����9����#������ ���*�������#

�"��<

� �*+��#����'"���#"���9���"��������"��

� �*+��#����'"���#"���7 �*� �.���#�

� �*+��#����'"���#"����� �#�

� �*+��#����'"���#"�������

� ��*�9�#���� �#"���B������� �

$ ��'�#������#��:���#���*�9�#���� �#"���B������� ������� ���'���#��

%=�>//$����#��"������*�9�#���� �#"���B������� ��"��� ���'���#��

%=�>//�/����#��"�����:���#�����#����#��������'���##"�������"��

��#"���'��#�������#�"�"���#"�� ������ ���'���"������#������ ��#�

����5���������5������������07������

-���#���$������������#"��������@74=�/�A�������������'�#�����9

���#�#��#������ ���*�������#��"����������&��"#��B�#���?�"���5

$��" �* ��?�"���'����������@��������'������������� ���'

��"������#�����������A

�� ��#������'�#������#�@"#�����J#���##����"������A�����#���������

2���"�����#"���'���#���%�������������2���"�����#"���'��

������

)'������ ��#���#�����*�9�#���� �#"���B������� �����#����#��#��

'"� �����#�����'�� #�����?�"���#�*��-������"�'���#"����*��#

��#�"���#���'"� �����#�"�#�*���������������� �����,�-��������&� ����'��&��� ��.�����/.0123345��������������'"�"�����&"��#��#��� �#

#���

)'������ ��#��������#�����9����#�*�"�����*�9�#���� �#"���B�����

� ������#���'��J��"���#�*����#��"�'���#"���'��#������#��"����-�

Page 51: Cnc - Jdedwards Xe

Running Object Configuration Manager Reports

3–29OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����"�'���#"����*��#���#�"���#���'"� �����#�"�#�*��������������� �����,� �������������������+�� �� �"���+�&� ��+���������

� "�&�#���#�*�'��#������#����������"�����#"����������#�#����#��

-������"�'���#"����*��#���#�"���#���'"� �����#����#�*����

����������� �����,� �������������������+�� �� �"���+�&� ��+��������

� "�&��C�#�����������:"#�#��#�����&��"#��B�#���?�"���5�$��" �* �

?�"���'���

Processing Options: OCM Mapping Comparison, Global Update,Delete, and Copy

����'� ��"���*�#������ "��#"������������"�����#"���#��#������#����'��

#���%=�>//$����#��"����"���#�����������"�����#"���'��<

� �*+��#����'"���#"���9���"��������"���@%=�>/�/A

� �*+��#����'"���#"���7 �*� �.���#��@%=�>//�A

� �*+��#����'"���#"����� �#��@%=�>/��A

� �*+��#����'"���#"��������@%=�>/�/A

��������"�����#"���'����9�*�#������ "��#"��� �#��������"'��#�����#�

�������������������"��������#"������ �#"���������"�����#�������

����"�����#"��� �#������#��#��������#������*��#������"'"��*�#��

��� "��#"���

�� ��#�������"�����#"���'��#������#������������# �����"����������

2���"�����#"���'"� ��'���#������#����"��������#" ��������#��#����#�

Driver Tab

��"�����"�����#"��� �#��������"'��#����*+��#����'"���#"���9���������#

�������#�#������?�"'��#��#�#����"� ��������#����*����������#��#��

���#��������#�#������E�������� �����"'��#�����"����������#�#�����'��#��

���#�

-���:��� ���"'��������#�#�����#�����9�9���"��������"������#��%=�>/�/

��� ��*���"� �����"��#����*+��#����'"���#"���9������%���#�1����'"� ��

-��"�'���#"����*��#�������"�����#"����"��#5� "�&�#�������"�����#"���'"� �

�������������#J���"�'���#������������� "�&�#�������"�����#"���'"� �����

���-/�

Page 52: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–30 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1. Object Configuration Manager Report Name

.��#�"�����"�����#"���#�����"'��#���������'�#������#�#��#��������#�#�

����?� "���� �����<

� %=�>/�/���9�9���"��������"��

� %=�>//����9�7 �*� �.���#�

� %=�>/����*+��#����'"���#"����� �#�

� %=�>/�/��*+��#����'"���#"�������

2. Version

.��#�"�����"�����#"���#�����"'��#�����"����'�#������#�#��#��������#�#�

���

R986101 (Mapping Comparison) Tab

���������"�����#"��� �#��������"'��#�����#�����������"��#�������"��

�����"����E�������� �����"'������#����#�������������"���#��

�����"�����������#������ �����#��:���#"���

-��"�'���#"����*��#�������"�����#"����"��#5� "�&�#�������"�����#"���'"� �

�������������#J���"�'���#������������� "�&�#�������"�����#"���'"� �����

���-/�

1. Data Source One and 2. Comparison Data Source Two

.��#�"�����"�����#"���#�����"'��#���������'�#�����#�������#��#����

���#�#���������

3. Comparison Method

.��#�"�����"�����#"���#�����"'��#��������"�����#������������

�����"�����#������#��"������������ ��������#�����#������������

�����������"�������"��#"��������� �� "#�������� ��"����#�������/�#��#

�����#�"����#��������������������������"��*�#���"��#"��������� �� "#

�����#��#����"����#�������/�*�#���#�"����#����������$1�������"����#�

�������#��#������#�"����#�������/�

?� "���� �����<

/ ������������"��#"����� ���2"�#��� ��#��������'�����"��#���'"#���#�

������*�#���#�"��#�����������#�������

B ��& �������*�#���"��#"����2"�#������"��#���'"#���#�������*�#���#�"�

#�����������#������������� ��#��������"��#�����������#������

#��#����J#��:"#�"��#���'"#���#�������

Page 53: Cnc - Jdedwards Xe

Running Object Configuration Manager Reports

3–31OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

4. Exceptions

.��#�"�����"�����#"���#�����"'�����#���#���"�#��� ��#������#��:���#"��

��#���"�#�����������'���#�����#��� ��#"������#"���#����"''������*�#����

#�����#��������?� "���� �����<

/ 2"�#��:���#"����� �

B ��& 2"�#�� �����

R986110 (Global Update) Tab

���������"�����#"��� �#��������"'��#�����#�����������'��#�������#��

E�������� �����"'�����#����������#�#�����#��������9������'��

�:"#"�����������#�������� �������������� ��#�#�����#��������9�����

'����:"#"���������� ���������#��#������#���2�������#� �����"��

��#"����" �����"#�������:"#"����� ���

-��"�'���#"����*��#�������"�����#"����"��#5� "�&�#�������"�����#"���'"� �

�������������#J���"�'���#������������� "�&�#�������"�����#"���'"� �����

���-/�

1. Process Mode

.��#�"�����"�����#"���#�����"'��#��������"����"���#������#������

��#���?� "���� �����<

/ 2��'�9�����2�����������#�#��#� �#������"���#���������������#�#�

�� �#���1������������ �#���

B ��& -"�� �9�����2�����������#��'�������������#�#���� �#�����������

���#������ �#���

2. Data Source name

.��#�"�����"�����#"���#�����"'��#���������'�#�����#�������'��#����*+��#

���'"���#"���9������#�* ���$�������#��#��#������������ #��'����"���#�"

���#��" �*�������#��#����*+��#����'"���#"���9������#�* ��'�����"��#��

���"'"�����#�������

3. Process Control

.��#�"�����"�����#"���#�����"'�����#���#�����#��������9�������

��������:"#"��������?� "���� �����<

/ ���#��������9������'����:"#"��������������������#�����

"�" ��#��#����� ��#�����:���#�#��#�#���������9��� �����#����"��#��

����"�����#"����" �*���*#"#�#�������������"�#��

B ��& �������� ��#���������"#��������9��� ����.����#��� ��#"���#�

���"'����"���������" �*�����������"#��#���������9��� �����#���

"�#��#�������"�����#"���

Page 54: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–32 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

4. Enter the new OCM values

.��#�"�����"�����#"���#����#��������9��� ����)'�����������#"������

��9������'����:"#"�������������� ���������#��'��#�"�����"�����#"��

�" ��� ����#����:"#"��������?� "���� �����<

� ���"�����#�1���

� �*+��#�1���

� 2"������#�������

� .�

� �*+��#�����

� ��#��������9���

� �����������#�������

� $ ���HB�

R986120 (Object Configuration Delete) Tab

���������"�����#"������* ������#�����"'��#�����#�������'�����"���#�

�� �#�����"'"���*+��#����'"���#"���9������������E�������� ��� ��#�#��

������'�����#"����������"'�����#���#�����#����*+��#������*�#������ "��#"��

@%=�>/�/A����"������* ������#�����#����������'������*�'����� �#"���#����

-��"�'���#"����*��#�������"�����#"����"��#5� "�&�#�������"�����#"���'"� �

�������������#J���"�'���#������������� "�&�#�������"�����#"���'"� �����

���-/�

1. Process Mode

.��#�"�����"�����#"���#�����"'��#��������"����"���#������#������

��#���?� "���� �����<

/ 2��'�9�����2�����������#�#��#����* ������#���"���#�����������

���#�#���� �#���1������������ �#���

B ��& -"�� �9�����2�����������#��'�������������#�#���� �#�����������

���#������ �#���

2. Enter Data Source Name

.��#�"�����"�����#"���#�����"'��#���������'�#�����#�������'��#����*+��#

9���������'"���#"���#�* ���$�������#��#��#������������ #��'����"���#�"

���#��" �*�������#��#����*+��#�9���������'"���#"���#�* ��'�����"��#��

���"'"�����#�������

Page 55: Cnc - Jdedwards Xe

Running Object Configuration Manager Reports

3–33OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3. Process Mode

.��#�"�����"�����#"���#�����"'��#��������"����"���#������#������

��#���?� "���� �����<

/ 2��'�9�����2�����������#�#��#����* ������#���"���#�����������

���#�#���� �#���1������������ �#���

B ��& -"�� �9�����2�����������#��'�������������#�#���� �#�����������

���#������ �#���

4. Object Copy

.��#�"�����"�����#"���#�����"'�����#���#�����#����*+��#����'"���#"��

��������#�@%=�>/�/A�� �����"#��#����*+��#����'"���#"����� �#�����#��?� "�

�� �����<

/ %���#����*+��#������@%=�>/�/A����"����#���������*�'����� �#"��

������������������#����*+��#�����������*��#����#��#��

����"�����#"������#���%=�>/�/�#�*�����#���#������#��� ��#"������#�

�� ��#"������ ��*����'"�������#���������"����'�%=�>/�/�#��#����

���"'"���'��%=�>/���@�*+��#����'"���#"����� �#�A�

B ��& �����#�����*+��#������@%=�>/�/A����"��� �#��#���������"#���#�'"#

���#"����������

R986121 (Object Configuration Copy) Tab

���������"�����#"������* ������#����#��#���#���#�������#"��#"�����#�

�����#��#��������"������"����*+��#����'"���#"���9�����������

-��"�'���#"����*��#�������"�����#"����"��#5� "�&�#�������"�����#"���'"� �

�������������#J���"�'���#������������� "�&�#�������"�����#"���'"� �����

���-/�

1. Process Mode

.��#�"�����"�����#"���#�����"'��#��������"����"���#������#������

��#���?� "����#"�����<

/ 2��'�9�����2�����������#�#��#����* ������#���"���#�����������

���#�#���� �#���1������������ �#���

B ��& -"�� �9�����2�����������#��'�������������#�#���� �#�����������

���#������ �#���

2. From Data Source

.��#�"�����"�����#"���#�����"'��#���������'�#�����#��������"#��#��

�*+��#����'"���#"���9������#�* ��'�����"����������#�#������������

Page 56: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–34 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3. Target Data Source Name

.��#�"�����"�����#"���#�����"'��#���������'�#�����#��������"#��#��

�*+��#����'"���#"���9������#�* ��#����"����������#�#�������

Running the Object Configuration Mapping Comparison Report

%���#����*+��#����'"���#"��������"������#�#����������*+��#

���'"���#"���9�#��@-=�>/�/A�#�* ��*�#�����#����"''���#���#����������

�"� ���#����"''������*�#�����#�����-���:��� ��������"��#��������#��

-=�>/�/�#�* ��"��#����#�����#�������#��#���-=�>/�/�#�* ��'�����"�������

������#�������

Before You Begin

� ��#�����"�����#"���'��#������#�'���#������#��"������#�'���#��

��#�� ����#��-��"�'���#"����*��#���#�"�������"�����#"������

����������� �����,� �������������������+�� �� �"���+�&� ��+��������

����'� ��"���#�&����"*������#���#������#��� ��#"���'��#������#��������

#�����#������#�

����������������������������7���5�0�������������

-���#�����#���$��"�"#�#"������ ������@74=�//A��������B�#��

?�"���@2=� �8A�

Page 57: Cnc - Jdedwards Xe

Running Object Configuration Manager Reports

3–35OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��#��%=�>/�/�"��#���B�#���$�� "��#"���'"� �������#����� "�&�-"���

���* �5� "�&�#�����"����������"'"������#����"�������"�����#"��

#�*������?�"���2���#"���'���������

���?�"���2���#"��������&�#�����#���� ��#"�����#"�������#����� "�&

��*�"#�

���#�����#���� ��#"���'����������'���#��������"�#���� ����#�

���"'��#����:��#�������������#�#���������

� "�&��C�

����������������0����5�������7���5�0�������������

-���#���$������������#"��������@74=�/�A���������*+��#

���'"���#"���9���"��������"���@%=�>//$A������$��" �* ��?�"��

'���������

���#���$��" �* ��?�"���'����������#�����"����������"���#��#��

���#��������#�#�����

� "�&��� ��#������?�"���2���#"���'���������

Page 58: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–36 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� "�&���*�"#�#�����#������#�

Running the Object Configuration Global Update Report

��"��������'���� �*� �����#������� �*� ����"���'��*+��#�����"���"�

#��������*+��#����'"���#"���9�#��@-=�>/�/A�#�* ���E����������#�"�*�#��

��� "��#"����#���#����#���"�#���#"������ "��#"���@2=�>//�A����"���� "��#"���"

��'� �"������#"�����������"����� #"� �������

Before You Begin

� ��#�����"�����#"���'��#������#�'���#������#��"������#�'���#��

��#�� ����#��-��"�'���#"����*��#���#�"�������"�����#"������

����������� �����,� �������������������+�� �� �"���+�&� ��+��������

����'� ��"���#�&����"*������#���#������#��� ��#"���'��#������#��������

#�����#������#�

����������������������������/������.��������

-���#�����#���$��"�"#�#"������ ������@74=�//A��������B�#��

?�"���@2=� �8A�

��#��%=�>//���#�#���B�#���$�� "��#"���'"� �������#����� "�&�-"���

���* �5� "�&�#�����"����������"'"������#����"�������"�����#"��

#�*������?�"���2���#"���'���������

Page 59: Cnc - Jdedwards Xe

Running Object Configuration Manager Reports

3–37OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���?�"���2���#"��������&�#�����#���� ��#"�����#"�������#����� "�&

��*�"#�

���#�����#���� ��#"���'����������'���#��������"�#���� ����#�

���"'��#����:��#�������������#�#������#���������

� "�&��C�

����������������0����5�������/������.��������

-���#���$������������#"��������@74=�/�A���������*+��#

���'"���#"��������@%=�>//$A������$��" �* ��?�"���'���������

���#���$��" �* ��?�"���'����������#�����"����������"���#��#��

���#��������#�#�����

� "�&��� ��#������?�"���2���#"���'���������

� "�&���*�"#�#�����#������#����������"�����#"���'���������

?�"'������"�����#"���

E����"��#����"���#���'� ��"���������������������#�"����#<

� ��� "��#��C���5�.���#�,�������#�����

E��������#�����#��������������#��������������"���#���&����'���

�:"#"��������

� $�#"�����-$.3��K2�* "������������#�*������#��

E��������#�����#��#�����-$.3��������'�#���K2.B3)�������

Running the Object Configuration Delete Report

��"�*�#���������� �#�����"'"���*+��#����'"���#"���9�����������'��

������#�������

Before You Begin

� ��#�����"�����#"���'��#������#�'���#������#��"������#�'���#��

��#�� ����#��-��"�'���#"����*��#���#�"�������"�����#"������

����������� �����,� �������������������+�� �� �"���+�&� ��+��������

����'� ��"���#�&����"*������#���#������#��� ��#"���'��#������#��������

#�����#������#�

Page 60: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–38 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����������������������������������0����5�����������������

-���#�����#���$��"�"#�#"������ ������@74=�//A��������B�#��

?�"���@2=� �8A�

��#��%=�>/����#�#���B�#���$�� "��#"���'"� �������#����� "�&�-"���

���* �5� "�&�#�����"����������"'"������#����"�������"�����#"��

#�*������?�"���2���#"���'���������

���?�"���2���#"����� "�&�#�����#���� ��#"�����#"�������#����� "�&

��*�"#�

���#�����#���� ��#"���'����������'���#��������"�#���� ����#�

���"'��#����:��#�������������#�#���� �#��

� "�&��C�

����������������0����5�����������������

-���#���$������������#"��������@74=�/�A��������*+��#

���'"���#"����� �#��@%=�>//$A������$��" �* ��?�"���'���������

���#���$��" �* ��?�"���'����������#�����"����������"���#��#��

���#��������#�#�����

� "�&��� ��#������?�"���2���#"���'���������

� "�&���*�"#�#�����#������#�

Running the Object Configuration Copy Report

��"���������"���*+��#����'"���#"���9�����������'���������#������

#�����#���������#���#"�� ���� �#��������� "��#��������-���:��� ���"'����

���#�����������"�����#�*������"�������:"#"���������*+��#����'"���#"��

9�����������������#���'��#����������"�����#�"��#����#�����#�������

E������#����*+��#����'"���#"��������*�#��������#�������#���������#�

#��������"�#������������#��������$'#������"���#������������#��

�*+��#����'"���#"���7 �*� �.���#��@%=�>//�A������#����#�#����"�"����

���������������"���'��3��$3�#��#��������"�#������ ���#"���

Before You Begin

� ��#������"�����#"���'��#������#�'���#������#��"������#�'���#��

��#�� ����#��-��"�'���#"����*��#���#�"�������"�����#"������

����������� �����,� �������������������+�� �� �"���+�&� ��+��������

����'� ��"���#�&����"*������#���#������#��� ��#"���'��#������#��������

#�����#������#�

Page 61: Cnc - Jdedwards Xe

Running Object Configuration Manager Reports

3–39OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����������������������������������0����5�������0�������

-���#�����#���$��"�"#�#"������ ������@74=�//A��������B�#��

?�"���@2=� �8A�

��#��%=�>/�/��#�#���B�#���$�� "��#"���'"� �������#����� "�&�-"���

���* �5� "�&�#�����"����������"'"������#����"�������"�����#"��

#�*������?�"���2���#"���'���������

���?�"���2���#"��������&�#�����#���� ��#"�����#"�������#����� "�&

��*�"#�

���#�����#���� ��#"���'����������'���#��������"�#���� ����#�

���"'��#����:��#�������������#�#�������

� "�&��C�

����������������0����5�������0�������

-���#���$������������#"��������@74=�/�A���������*+��#

���'"���#"��������@%=�>//$A������$��" �* ��?�"���'���������

���#���$��" �* ��?�"���'����� ��#�#�����"����������"���#��#��

���#��������#�#�����

� "�&��� ��#������?�"���2���#"���'���������

� "�&���*�"#�#�����#������#����������"�����#"���'���������

?�"'������"�����#"���

B�'�������"���#���� ��#����*+��#����'"���#"���9������������#�"

�����'"#��� �#��������� "��#�������

Running the Verify Object Configuration Manager Report

����?�"'���*+��#����'"���#"���9������@%=�>// �A����#�"�����'�

#��* ����#"���#�� �#��#������� ��������"'��#��#<�

� $ ���#��������9�#����'"�"#"���������*+��#����'"���#"���9�����

����"��

� �*+��#����'"���#"���9����������"���������"#��#�'�����"�������

#��#�#�������"����������#���������'"�"#"��������#��#�#���������

��� "��#������"��

� $����"�#�����"'"��#"���'" ���:"#���������"'"�����

� B�"���'���#"����33��:"#���������"'"�����

%���#�"����#�#����"'��#����*����"#���'������&#�#"�����������������

����"��������"����������#�"����#���#��"�����"����#��'��*+��#

Page 62: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–40 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���'"���#"���9������������#��������9�#��#�* ���" �*����"'"���

����;���# ���������� �����#�"����#�������� ��� �����"��������������

����#��#��������� ���E�������� �����#�"����#����#������ �����#

����

�������)������������0����5�������7���5��� 8!"#$$*+%

-���#���$������������#"��������@74=�/�A��������?�"'����9

@%=�>// �A������$��" �* ��?�"���'���������

����������"��������#����� "�&��� ��#������?�"���2���#"���'��

������

���#���?�"���2���#"���'����� "�&���#���� ��#"�������#����� "�&

��*�"#�

����2���"�����#"���'���������

���� �#��#���'"� �����#���2���"�����#"���'����2���"�����#"��

����"�"����"�#����#���"����#��#���������� ��#�#���#�����'��� "��#"��

#��#��������#������'"#�#�����#"�����#�"��#���:#��������#������

�� "��#"��������#������"�"�����#"�����#�"��#���*+��#����'"���#"��

����"����� "��#"���

3�����������#"���* ��&�"'����������#����#������ ��#�����#��#

�� "��#"���

����'"� �����#���2���"�����#"���'��� �#��������#���'� ��"��<

Page 63: Cnc - Jdedwards Xe

Running Object Configuration Manager Reports

3–41OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ?�"'����#���������#����'"�"#"������#��/�#�����* ������� ��#�

��"'��#��#�� ��'�������#��������9�#��@-=�>//A���'"�"#"�������

�*+��#����'"���#"���9����������"���

� ��#��#���������'�#������"�����#��������#�#����"'���E�������� �

��#��K$33�#����"'��� ��'��������"�����#����"����"�����#��"

*������'��� ��'�#���'� ��"�����"'"��#"���

� ��#��#������)���'�#���"��"�"��� ��������@"�� ��"���K2.B3)�A�'�

��"����������#�#����"'��#��"��*+��#�����"����E�������� ����#�

K$33��� �����#�"�'"� ��* ��&�#����"'��� ��'���������)'�������#�

���"��"�"��� J����)���#������#�� ���"�#�#���K2.B3)�������

� ����"'�����#���#����"'����#"����������#"�������"������#��/�#�

��"'��#��#�� ��'�#�����#"����*+��#����'"���#"���9����������"��

'��#�������������"�����#�#��#�������#�����������#������

��'"�"#"���"��#�����#��������9�#��@-=�>//A�#�* �����#����#�

��"'��*�#����#"������������#"�������"���

� ����&�'����� "��#����������#��/�#����"'��#��#�#���������

��� "��#���*+��#����'"���#"���9����������"���'��#���������

���"�����#�#��#�������#�������"���"'"����� "��#"����� ��'�

��#"�������"���

� ����&�'������ "��#����33���������#��/�#����"'��#��#��

���� "��#����33�������:"#�'�������*�"���'���#"�������

���"'"�����������#��#�#����33������"��� "��

� ?�"'�����"'"��#"���'" �����#��/�#����"'��#��#�� ����"'"��#"���'" �

�;�"���#���������� ���:"#�'��#�����#����������"���#"��

��� "���� ����������"������"�#�������

����'� ��"��������"* ��������#��#��������������#�"����#<

����'� ��"��������"* �����������#��#��������������#�"����#�

-� ��"���#������������#����:� ���#"��������� �#"���

7����5� ��������������8��������

���������9����� ���� "*���#��#�#�����#��������'������������#��:"#�

�������#�����#��������9�#��@-=�>//A�#���'�������

�� "�� "*���������#��#����'������� "*���

0��9������������� ����"���#�'" ��@�$B3�3)��A�������#��:"#�����#���$�,6���

#���"���#�'" ��@�$B3�3)��A���#�*��"��#��� "*��� "#������

#���"���#�'" ��'���#�����&#�#"���@�#��LB"� �A�#����'" �

"��#��� "*��� "#��� ����$B3�3)���

1��������&�����:��� ����)���'�#�����������*+��#�"����)#�����*������ ��"'�#��

�*+��#�"��;�� �#����-$.3���@������*+��#������

*�"���'���#"�����������"��#�:#������#�����������G��

)��A

Page 64: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–42 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

7����5� ��������������8��������

0��9��������� �"#���#���#�* ��������#��:"#�"��#�����#����������#��

��#�*���"���#����" �* ���)'�#�����#�*���"����" �* ��

���#��#���#�* ��"��#�����#������������"'��#�����#�

������9�#��@-=�>//A������#���'����������#������

#��#����#�"��#���#�* ��

0������������� ����#�* ��������#��:"#�"��#�����'�� #���#���������"#��

���#������ "����'�� #���#��������������������"��

�*+��#����'"���#"���9�#��@-=�>/�/A������'��#��

#�* ��

���������6������ �"#�"��#����������"�����#����������#�������������

�*+��#����"�����#���"''���#���#���������� �#���

����#"��#��#������ "��#�����"���

������������������� ������#�������������#��:"#������"'"���"��#��

���"������������'�#���'� ��"��<

� ���#����������#������������"��#�����#�������

9�#��@-=�>//A

� 9��"'��#����*+��#����'"���#"���9�#��@-=�>/�/A

�����#���'���������� "����#������

� ����#"��#��#����*+��#����'"���#"���9�#������

.;���6�������������6��

���6�������%

E�����#��"��������� ����#����������*�#�������

���"���*������#������#�"�#�������#��"��#���#���&�

�� �#��#��������

�17�����������:���������

���%

�������"'"��#"���'" ��������#��:"#����"#�"�����#���

?�"'��#����:"#������'�#������"'"��#"���'" ������'":��

�������

������������5� ;��

���%

����*�"���'���#"���������#��:"#�"��#�����#������

���#"������#�������#��33�'��#���*�"���'���#"���"���#

�� "���?�"'��#��#�#�������#��33�'��#���*�"���'���#"��

"��� "��

;���3����������� ������#��������9�#��@-=�>//A������* ��&���#�������

�� �#��#��������

�������������������

�����6���6�������

������#�������������#��:"#�"��#����*+��#����'"���#"��

9�#��@-=�>/�/A�#�* ����� �#��#�����#�������"'�"#�"���#

*�"�������������������������������#������

��� ���:"#�*�#�����"��������#��;�"�����:#�����

��#������������������*�#��� �#���"#�����#"���

Page 65: Cnc - Jdedwards Xe

Running Object Configuration Manager Reports

3–43OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

7����5� ��������������8��������

;���3���6������� ���������"���#��� "��*������"#����#�"����* ��&

���"�����#���� �#��#��������'���#����*+��#

���'"���#"���9�#��@-=�>/�/A�������"'��#���������"#�

���� "�����"�����#�

�������������� �����������������������#���������"��#����*+��#

���'"���#"���9�#��@-=�>/�/A�#�* ����� �#��� ���� "��#�

�����

;���3�;�� ���� ��������#��33�'��#���*�"���'���#"���"�* ��&������"'�

���� "������#��33�'��#���*�"���'���#"�������� �#��#��

*�"���'���#"���"'�"#�"���#��� "��

Processing Options: Verify Object Configuration Manager(R9861130)

Data Source Tab

���������"�����#"������* ������#���"#��������#�����������"��

��"'"��#"��������#��"��"��#��#������"�����#��������#�#����"'��

-��"�'���#"����*��#�������"�����#"����"��#5� "�&�#�������"�����#"���'"� �

�������������#J���"�'���#������������� "�&�#�������"�����#"���'"� �����

���-/�

1. Data Source Validations

.��#�"�����"�����#"���#�����"'�����#���#����'�����#��������� "��#"��

'����#���������#����'"�"#"����?� "���� �����<

/ ?�"'��#��#��������#�����������#� ��#�������9�����"�����'"����

B ��& �����#���"'����#���������'"�"#"���

2. Environment Validation

.��#�"�����"�����#"���#�����"'��#������"�����#@A�'����"����������#�#�

���#����� "��#"����?� "���� �����<

K$ %���#����� "��#"���'��� ����"�����#�

$����"'"�����"�����#�������@?� "��#���� ��#��#����"�����#�

Page 66: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–44 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Parent DLL Tab

��"�����"�����#"������* ������#����"'��#��#������*�"���'���#"�������

�� "������#��33��"�����

-��"�'���#"����*��#�������"�����#"����"��#5� "�&�#�������"�����#"���'"� �

�������������#J���"�'���#������������� "�&�#�������"�����#"���'"� �����

���-/�

1. Business Function Parent DLL

.��#�"�����"�����#"���#�����"'�����#��������*�"���'���#"�������

����#��33��"������?� "���� �����<

/ ?�"'��#��#������*�"���'���#"������������#��33��"������$ �����"'�

#��#�#����33������"��� "��

B ��& 1����"'"��#"���"������

Specifications Tab

��"�����"�����#"������* ������#��"��"��#�����#����������#�#����"'��#��#

� ����"'"��#"����;�"���#���������� ���:"#����#�������

-��"�'���#"����*��#�������"�����#"����"��#5� "�&�#�������"�����#"���'"� �

�������������#J���"�'���#������������� "�&�#�������"�����#"���'"� �����

���-/�

1. Validate Server Specifications

.��#�"�����"�����#"���#����"'��#��#�� ����"'"��#"����;�"���#����

����� ���:"#�'��#�����#���������"�����"�����#"������ "���� ������

���"������"�#��������?� "���� �����<

/ ?�"'�����#���#����;�"������"'"��#"����:"#�

B ��& �����#���"'�����"'"��#"���

OCM Tab

���������"�����#"������* ������#����#���� "��#"��������#��'��.��)��

��9�����"����������� "��#����9�����"���

-��"�'���#"����*��#�������"�����#"����"��#�� "�&�#�������"�����#"���'"� �

�������������#J���"�'���#������������� "�&�#�������"�����#"���'"� �����

���-/�

Page 67: Cnc - Jdedwards Xe

Running Object Configuration Manager Reports

3–45OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1. User ID to Validate

.��#�"�����"�����#"���#�����"'��#������)��'����"���#�����9��� "��#"��

��� ��*������?� "���� �����<

B ��& %���#����� "��#"���'��� ����

K$33 %���#����� "��#"���'��� ����

K2.B3)� %���#����� "��#"���'���� ��K2.B3)��

$����"'"��.��)���@2�'����� "��#"���'���� ��#��#����A

2. OCM Mappings

.��#�"�����"�����#"���#��"��"��#�����#���#���� "��#����9�����"����?� "�

�� �����<

B ��& �����#��� "��#����9�����"���

/ ?� "��#��� ���#"�����9�����"���

� ?� "��#��*�#��#�����#"�������"���#"�����9�����"���

3. Duplicate OCM Mappings

.��#�"�����"�����#"���#�����"'�����#�����9��������� ��*������&��

'����� "��#���?� "���� �����<

B ��& �����#�����&�'����� "��#��

/ ?�"'��#��#�#�����#"�����9�����"������������������� "��#��

Running the Object Configuration System Table Update Report

��"������������#"����*+��#����'"���#"���9������@��9A������'���

���"'"���#�* ������)���������#�������'��� ����"�����#� "#���"��#��

���"�����#���#�" �5������ ��#�* ��@-��=6/A��E������������#��� ��#"���#�

'" #��#������"�����#�#����"���#�"������������9������

�������������0����5�������������������.���� 8!"#$+$1%

-���#���$������������#"��������@74=�/�A���������*+��#

���'"���#"�����#�����* ��.���#��@%=�>/�/$A������$��" �* ��?�"��

'���������

���#���$��" �* ��?�"���'����������F������/�����#����� "�&��� ��#�

���#���?�"���2���#"���'����� "�&���#���� ��#"�������#����� "�&

��*�"#�

�����#���� ��#"������#��"�����"��������#������#������#����� "�&��C�

����2���"�����#"���'���������

Page 68: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–46 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���#���2���"�����#"���'������#��#���'� ��"���"�'���#"��<

� ��#��#���#�* �������'����"���#�����#������"���

� ��#��#�����#�������#����"���#���#�* ����� ��*���������

� ��#��#������)��'�������#������#��������������� ���K2.B3)�

����#��������'��� �����E�������� ������*�������

� ����"'�����'���'"�� ���������#��/�'��'"�� �������)'� �'#�* ��&�

��� "��#"������"�����'�������%���#�"������"�����'������'"#

#��#�#����#���#�������#��� ������#��������'� ��� #�

Processing Options: System Table Update (R986101A)

Process Tab

���������"�����#"������* ������#�����"'��#���#�* ����������#�����������

���)��#�����"�����#"��������9�����"����E�������� �����"'�����#���#�

���#������#�"�����'���'"�� ������

-��"�'���#"����*��#�������"�����#"����"��#5� "�&�#�������"�����#"���'"� �

�������������#J���"�'���#������������� "�&�#�������"�����#"���'"� �����

���-/�

1. Enter a specific Table Name

.��#�"�����"�����#"���#�����"'��#���������'�#���#�* ���������#�#������#�

��������"�����#�������#�* ��������� �����"#��#����� ����������"'��'��#��

��#������������.��)������"�����#"�����" �"�#�����#������� ����9

9���"���

2. Enter a specific Data Source

.��#�"�����"�����#"���#�����"'��#�����#��������������#�#������#������

���"�����#��������#��������� �����"#��#����� ����������"'��'��#�����* �

1��������.��)������"�����#"����"�����#�����#������� ����9�9���"���

3. Enter a specific User ID

.��#�"�����"�����#"���#��"���#"'��#������)��#��#��" �*���������#������

���"�����#���������)���� �����"#��#����� ����������"'��'��#�����* ��1���

������#������������"�����#"�����" �*������#�����#������� ����9

9���"���

Page 69: Cnc - Jdedwards Xe

Running Object Configuration Manager Reports

3–47OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

4. Proof/Final Mode

.��#�"�����"�����#"���#��"��"��#�����#���#���*�#������ "��#"������"�

2��'���-"�� �������%���"���#���*�#������ "��#"���"��2��'�����������#��#

����������#����������-"�� ����������#����������������?� "���� �����<

B ��& 2��'������

/ -"�� ������

Running the Create OCM Records for Business Functions Report

��"�*�#������������#����*+��#�3"*�"���#�* ��'������*�"���'���#"���

����#�������#����9������'��#����*�"���'���#"���"��#���#���#���#�

������������"'��#����������"�����#"����2���"�����#"���� ��� ��

����#�����"'��#����������#��������������"�����#�#�������������#"��

#������9������

�������0������07�8�����������;����������������� 8!"#$<+%

-���#���$������������#"��������@74=�/�A�����������#����9

%�����'��B�"���-���#"���@%=�>/6�A������$��" �* ��?�"���'��

������

���#���$��" �* ��?�"���'����������F������/�����#����� "�&��� ��#�

���#���?�"���2���#"���'����� "�&���#���� ��#"�������#����� "�&

��*�"#�

�����#���� ��#"�������"'����"��������#�����#�������#����� "�&��C�

����2���"�����#"���'���������

���#���2���"�����#"���'������#��#���'� ��"���"�'���#"��<

� ����"'�����'���'"�� ������������������#��/��#������#����"�

-"�� ���������"������#������#��" �*���"�#����������#��"

*������#���������������#������ �����#�"�'"� ��* ��&��#������#

���"��2��'���������"������#������#��" �*���"�#���*�#���

����#"��������

� ��#��#���������'�#�����#�������#�������������#"�����9

�����'��#���*�"���'���#"���

� ��#��#���������'�#������"�����#�#�������������#"�����9

�����'��#���*�"���'���#"���

� ��#��#���������'�#�����#�������������������#�#��� ����#��

���#�����9������'������*�"���'���#"���

Page 70: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–48 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Running the Job Master Deletion By Days Old Report

��"�*�#������ "��#"��� �#�����������������#� "#"����*� �#���"�#�+�*

�*�"##���#�������E��������#�����#"����'������#"���#������#��� ����

�����#"���#������#�����#������ �#"����*� �#�������'���#���-=�>//��#�* ��

��"�*�#������ "��#"���"� ��������*�������#��"������#��������#��� ��#"��

'���#���*�#������ "��#"����*�#���#������"�����#"���'���#������#��"��

@%=�>//�/A����#�'���#�����#�� ���� "��#"���@%=�>//��A��-��"�'���#"����*��#

��#�"�������"�����#"������������������ �����,�-��������&� �����'��&�� ��.�����/.01233456�

�������������������������=���7������������

-���#�����#���$��"�"#�#"������ ������@74=�//A��������B�#���?�"��

@2=� �8A�

��#��%=�>//����#�#���B�#���$�� "��#"���'"� �������#����� "�&�-"���

���* �5� "�&������'�#���'� ��"�����"��<

� F������/�O���*��"#��$ ��#�#�

� F��������O���*��"#��������#�#�

� F������ �O���*��"#������#�#�

� F������6�O���*��"#����"#��#�#�

����?�"���2���#"���'���������

���?�"���2���#"��������&�#�����#���� ��#"�����#"�������#����� "�&

��*�"#�

���#�����#���� ��#"���'����������'���#��������"�#���� ����#�

���"'��#����:��#�������������#�#���������

� "�&��C�

�������=���7�������������;����������� 8!"#$$+$%

-���#���$������������#"��������@74=�/�A����������*�9�#�

�� �#"���B������� ��@%=�>//�/A������$��" �* ��?�"���'���������

���#���$��" �* ��?�"���'����� ��#�#�����"����������"���#��#��

���#��������#�#�����

� "�&��� ��#������?�"���2���#"���'���������

���?�"���2���#"����� "�&���*�"#�

���#���2���"�����#"���'������#��#���'� ��"���"�'���#"�������#���

� "�&��C<

Page 71: Cnc - Jdedwards Xe

Running Object Configuration Manager Reports

3–49OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ��#�������

� ����� �

� ���#� �9���

� ��*����#� ��#�#��.B�

-��"�'���#"����*��#���#�"�������"�����#"������������������ �����,-��������&� �����'��&��� ��.�����/.01233456�

Processing Options: Job Master Deletion By Days Old Report(R9861102)

����*�#������ "��#"�����*�9�#���� �#"���B������� ��@%=�>//��A�"� �������

'������#��"���%=�>//�/����#������"�����#"���'��#�"�*�#������ "��#"��

#������#������#��"���

��"�����"�����#"������#���#�*<���'�� #�����?�"����.��#�����'�� #�#�*

#�����"'��#�����#��������#������*���'������ ���"#�"��������#���+�*����#�

�����@2��'���-"�� �����A��.��#���?�"���#�*�#����#��#�����"����������#

#�����������������#���%=�>//���*�#������ "��#"���

Defaults Tab

���������"�����#"��� �#��������"'��#�����#�������'��#��������#��

���*���'������ �������#���#�*��"������#��*��"�� ��������#������#�@���

� "�"* ��'���� �#"��A������#������#� ������

-��"�'���#"����*��#�������"�����#"����"��#5� "�&�#�������"�����#"���'"� �

�������������#J���"�'���#������������� "�&�#�������"�����#"���'"� �����

���-/�

1. Data Source

.��#�"�����"�����#"���#�����"'��#�����#������������#��#��" �*������"�

#�����*�9�#���� �#"������#�@%=�>//��A�

2. Days Old

.��#�"�����"�����#"���#��"�� ����"��#������#��*�"##����"�#�+�*�#��#�����

*�������#������� �����#����#������"'"������*���'������-���:��� ���"'

������#��/���#������#�"�� �����"�#�+�*�#��#������*�������#�������'��/�

����������

Page 72: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–50 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3. Control Mode

.��#�"�����"�����#"���#�����"'��#������#� ������'��#������#��?� "�

�� �����<

/< 2��'�9�����7����#�������#��'��*� �#���"�#�+�*��*�#���#��� �#��#��

+�*�

� -"�� �9�����7����#�������#��'��*� �#���"�#�+�*������� �#��#����'��

#�������

)'��������������*��#����#���#���� �#�����������"������"���#���*�#��

��� "��#"���"�����'������'"#������#����'"�� �������'#�������������"'"���#��#

�������#�#���� �#��#�������� "#���

Versions

��"�����"�����#"��� �#��������"'��#�����"���#�����������������#��

*�#������ "��#"����������"������#�����"�������� ��#���"''���#��"�#�+�*��"

*��"�� ��������#������#�

-��"�'���#"����*��#�������"�����#"����"��#5� "�&�#�������"�����#"���'"� �

�������������#J���"�'���#������������� "�&�#�������"�����#"���'"� �����

���-/�

1. Job Control Status UBE (R9861102)

.��#�"�����"�����#"���#�����"'��#�����"����'�#���%=�>//���*�#��

��� "��#"���#��#��������#�#������?� "���� �����<

� F������/���*��"#��$ ��#�#�

� F����������*��"#��������#�#�

� F������ ���*��"#������#�#�

� F������6���*��"#����"#��#�#�

� $�����"��������������'"���

Running the OCM Category Update/Delete Report

��"�*�#������ "��#"��� �#���������#������ �#��'���#����*+��#����'"���#"��

9������#�* ��@-=�>/�/A����*���*+��#��'������"'"�����#��������"�����

#��#����������������� �#����9�����"���'��� ����*��"��#���������#����

�#���#�������"������� �#"���#����"��"�"��� �����������"�����#"���'��#�"

*�#������ "��#"���� �������#�����"'�����#���#���������� �#������"�����

�� ���#��������"�#����#�����������"�����#��������#�������#�����

Page 73: Cnc - Jdedwards Xe

Running Object Configuration Manager Reports

3–51OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��������07�0��5����.���(������ 8!"#$+$;%

-���#���$������������#"��������@74=�/�A����������9���#����

.���#�,�� �#��@%=�>/�/BA������$��" �* ��?�"���'���������

���#���$��" �* ��?�"���'����������F������/�����#����� "�&��� ��#�

���#���?�"���2���#"���'����� "�&���#���� ��#"�������#����� "�&

��*�"#�

�����#���� ��#"�������"'����"��������#���������� �#�������#����� "�&

�C������2���"�����#"���'���������

���#���2���"�����#"���'����� "�&�#�����9�9����#�*�������#��#��

'� ��"���"�'���#"��<

� ����"'�����'���'"�� ������������������#��/��#������#����"�

2��'��������������#��" �*���"�#�������#����*+��#����'"���#"��

9������#�* ���" ���#�*������#���������������#�����#������#

���"��-"�� ��������������#��" �*���"�#�������#����*+��#

���'"���#"���9������#�* ���" �*������#���

� ����"'���������� �#����������#��/�#��������9�����"���'�

�*+��#�"��#�����#����������#���� �#������"���

� ��#��#������"�������"���������������#��/����9�����"���'�

�*+��#�#��#�� ��������������"���'��#������"�����#�������

����� �#���������������#������ �����#�"�'"� ��* ��&������"��

'��#�������' "�#"�����9�������������#"��#����*�#���#��� �#���

� "�&�#�����9���##"���#�*�������#��#���'� ��"���"�'���#"��<

� ��#��#�����#��������������#�#�������������"������� �#"�����9

����"���������������#������#������������"����" �*���������

�� �#���'��� ����"�����#��"#��#�����#�������������#���E��

���J#������#����#������#�������"'�������#����������"�����#

�����#������#������"�����#�����"�����#"����)'�#�"�'"� ��"

* ��&����9�����"����" �*������������ �#������� ���'�#��

��#�������

� ��#��#������"�����#��������#�#�������������"������� �#"��

��9�����"����)'�#�"�'"� ��"�* ��&����9�����"����" �*�������

���� �#������� ���'�#������"�����#��)'�������#��������#������

#������#���2�#�����������"�����#"����#��#���#�������"������)'

*�#��#������"�����#�����2�#�����������"�����#"���'"� ����

* ��&����9�����"����" �*������������ �#���'��� ����"�����#

"��#������"�����#���#�" �@-��=6/A�#�* ��

� ��#��#������� ����������)'���������� �#"�����9�����"��

����#�"�'"� ��"�* ��&��� ���9�������" �*���� �#������� ���'

#������� ����������)'�����������"�����9�����"����������#

��#��#�"�'"� ��

Page 74: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–52 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ��#��#�����#��������)'���������� �#"�����9�����"�������#�"

'"� ��"�* ��&��� ���9�������" �*���� �#������� ���'�#�����#�

������)'�����������"�����9�����"����������#���#������ ���"�

#�"�'"� ��

Page 75: Cnc - Jdedwards Xe

3–53OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Partitioning Application Logic on Servers

���� ��"��'������� ����� "��#"�������*����#"#"�����#��������#� ��*�

����"���"��"�"��� ������"'"���������'�*�"���'���#"�����������#�#����

��������� "��#"�����������#��"������"�#�����'��������&#�#"���

��������������'�����#��#����� ��"�����#�"��*�"���'���#"�����������#

@"�� ��"�����#��*�"���'���#"�������*�"���'���#"��A�����"��"'"���# �

"������#�����'��������'����"#"*�#�������� ����&#�#"�����" �

"�� #����� �������"�����#��&�#�''"�����"����� �����#�"��� ��

�����"����*+��#��"�������� �J�#�������*+��#����'"���#"���9�����

@��9A���#���� ����

�:��� ���'��������'"���#"������" �#�#���*��#����"����� "��#�� "��#,

��������������#�������� "��#�� "��#,�������������� ��B�#������ �����

��� "��#"������"'"��#"������#���� "��#�����*�"���'���#"�����������#���

#��������������"���"''������"�#��#�#����"��������� �������1�#

������"��#"����"�� ��������" ��#������������ �������1�#,��%B$

�"�� �����

��" ��#�������� ����"���� �������#����#"#"���� ������ ��*�"��

'���#"�����������#��#���*"���#�*���'"#�"���"����'�����#"#"��"���9�#�

B�"���-���#"���@9B-A�

����� ��#����#"��5�"��#������ "��#"������*�" #�������#���������#��'

9B-����"������#��"�� ������"* ��'��#����#"�����"#�����'������"##"��

#����#"���#��#�����#�*����9�#��'�#���),����"���'��#����#"��5�"��#��

��� "��#"��������'�����*��9B-��B�� ��� "G"���#�����+�"#���'�*�"��� ��"�

'��#����#"���"��9B-�������#"#"��"���#���9B-�#����������� "��#"�������

��#��&�#�''"������*���"�"�"G����#�������#"�� ��"����"���#�����'������

�'�#������ "��#"���"���"#"*�#��������$1����"�����#�

)����#��5#"���#��������9B-��������������#���� "��#��#����"��� �#��'

"�#���#"���*��&�����'�#������#����$1�*�#������ "��#����������)���

#���5#"���#������"#"����'���� "��#������#���������������� "��#"����

��#��"�������#����#"�������"������������������3$1�*�#�����#��

#��������)�#���#"�������#����$1�*�#�����#���� "��#���������"�#��

�������#����#�"���"���#����#���� "��#��������"���*��&��� #�'���#�������

��"�#���5#"�����'"���#"��������� #�"����"��"'"���#�����#"���"��#�''"�����

#����$1�

����'� ��"���'"�������#�#�#��"�� ���#��&�#�''"��'����#��5#"���#�������

9B-��������������#���� "��#��������#��&�#�''"�������#�#"���'���

#���5#"���#��������9B-��������������#�������

Page 76: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–54 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Fetch Record

Return Record

Validate Data Format

Format OK

Send Record Detail

Detail OK

End Transaction

(GUI, ER, MBF)Client

(data)Server

Two-Tier: Typical Network Traffic

Three-Tier: Network Traffic Segmentation

Wide Area Network

Fetch Record

Return Record

Validate Data Format

Format OK

Send Record Detail

Detail OK

End Transaction

Inputs andresults

(data)Server

Local Area Network

(MBFs)Server

(GUI, ER)Client

Wide Area Network

Page 77: Cnc - Jdedwards Xe

Partitioning Application Logic on Servers

3–55OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

How a Master Business Function Operates

����'� ��"����"���'�����#������#�#��������#��"�� ���� "��#"����#" "G����

9B-����"��:��� �����#����� ��������#��@���A���� "��#"���

�����'��� ������3"��

����'"#�����#�����������#��������'���� ������ "���"��������

���"���#�������� ��� "��#���� "��#"���#���� �#���+���� �*+��#�$2)����"

��������������������#��#���9B-��)�� ������"#��#���������"���#�

@"��#���'����'�����#��#��#��A�'��#��� "����������� "��#"������

��������� ��#����������"#��"#����"�#�����#������#�"�������#��

������"���#��#���� "��#���� "��#"����������#��#�����:#� "���

9B-�%���"���3"���9����

��"�����#�����������#���9B-����"���#������1�#�������#��#

"�� ����#�����#��'��#��� "�������� "�����#��"��������"��#������J�����

������

9B-��:#����������"#�#���3"��

��"�����#�����������#���9B-��:#����������"#�#���� ������ "���

������#���������#���:#����������"#�#��� "���"�#��"�� ��������� ��� �

�����3$1��������#��"��;��#���*������#�*��5��������#��H3��� �����"

#����#���*��#������ "��* ���������#�*���������#"�"#��@��B�A��

��� ���� �3��� �)�#�'����@��)A�������"��

9B-��������%�#���9�����#��#���� "��#�$�� "��#"��

����'��#������#�������'#��#���9B-��:#����������"#�#���� �����

"��������#���#����:#������ "������� ���������������#��#���� "��#�

�����#���������"���#��"������1�#������#�/�#������6����#���

����#������������ ��'��� ��'�#��� "������"�#����"#��#���� �

����

�����'��� ������@�C�B�##��A

��"�����#�"��"��#��#��#�#������������� �#���� �� ������ "�������

���#"����#�"�����#�*��� "�&"����C��'#��� ���"#��� "��������*���

�#�����#��#���� "��#�������#������� "�&��C����P�����'�#����#"��Q

������"���#�#��#���9B-������� "��#�"�#����"����"�#� ��� �����#�

��#��#�����:#�#����#"���

9B-�2�����#���-� ������#"��

����'� �#����#"���"�������������#���9B-���������� ������#��

�����������������@������ �#����#"��� "������#���A�����*��"�

#���������'�����"##"���#���#����#"���#��#�����#�*���

Page 78: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–56 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�����#"�������"#���#�#��#�����#�*�������9B-�� �����

����9B-�����"#�#�����#"��#����#"���#��#�����#�*����#��"�� �� ��� �

#��������B��������)������� �������#��������������������'��#��

���� �#���#����#"���

9���"���#���9B-�#��������#������������#���*� &��'�#�����#�*��

���� ��"��"�#���#"���#��������"#�"����"�� ����������"���@��#��"�

���A���*�#�����3$15�##����������"���@��� "��#"�������������#�

���A����"������#��#�#���#����#"������*������������"#���

�"�"�����'���#��&�#�''"�����"�#�����'���� "��#"���#����#"���"�"��� �

�"#���'����'���������"��"���"#"*�#��������$1����"�����#�

Server Behavior with Partitioned Application Logic

��������#����#��"�� ������5� "��#�����"�����#"#"��"������ "��#"��� ��"��*�

���'"��"���*�"���'���#"�����������#�@������9�#��B�"���-���#"��

�����#���*�"���'���#"��A�#��������#��������;�"��#�������#����

��������������#������������"#"��� �����"������������"���#��#

+���"�"������#��#��#���#�*���#�#�����#� �#������J�*����"�������#�"

"���������& �����-����#�" �����##"���#����+���"�"������#�����

���� �����"��#���������������������������

����'� ��"���������� ���:� �"����������� ���������#�����& �����'

���"���*�"���'���#"�����������#�@9B-A���������� "��#"��������

��#��"������

Processing Rule 1 - JDENet on Client

���#���� "��#��#������1�#�'���#"����"���"���������"�5 "�&� "*���@�33A��� ��

+����#�� �������'���#"�������� ���*��#�������� ���:� ��������

@��:� ����:�A�����#�"��#���������#������������#�����������"��N�#���

������'����"#�"��#�����:� ����:�������

���������� ��� "��#�'"#�"�"#"�#����������"��#"����"����"#��������� �

����@����'"����*��#����*+��#����'"���#"���9�����A��#��������"�����#�

������"��#���"#�������"'"�����1�#���������#��#��������"��"�����#

��"#�'��#�������� ���"�������#�"��#������� ��"�� �������#"���"

��"�#�"����'���� ������#������"�"��������

Processing Rule 2 - JDENet on the Server

E����������'"������ #"� �����1�#�������#���������������2����#��"�

#������J�+���"�"�'" �����"'��������������1�#�����������*��#�#������#��

��������� ���#���#�#� ����*���'���#��&�������#"���#��#����������#�����

'���#��#�����

Page 79: Cnc - Jdedwards Xe

Partitioning Application Logic on Servers

3–57OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

)'��������"'���� #"� �����1�#������������� ��#�#�#����������

�;�"�����������5'�5����*�"��"#��"����"����"����;��#���#" �#��

��:"�������*���'����1�#����������#�#��������������� ���;���#"� �

�"����*�;���#��"���#�����1�#���������"#�"����������1�#�����

���������;����������������������#���#"���

�:��� �<

Session 1: JDENet_1Session 2: JDENet_2Session 3: JDENet_3Session 4: JDENet_1Session 5: JDENet_2Session 6: JDENet_3

���������"����:��� ��"�*�������#��������#�"#"�� "#���"��#���'� ��"��

#�* �<

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ0�����������

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ)����

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ���>����4�������ÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

1��*���'����1�#������ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

[JDENet]maxNetProcesses=3

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

1��*���'�������#"�����

���

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

���ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

��"�"���"#�5���"'"����"�* �

���*������"�� ��#����##"��

��� ��*������ ����"���������

#�����������#��#������#"��

��:"����'��#���"�#� �#"���

$�������#"���"���'"�������

������;��#�*����� "��#

@�������� ��5��A��������

@������������ "��#"������

������#"���#������#�����A��)'

#�"����*��"��#�#��� ���

�����#�����:"�������*���'

������#"���"�����������

���"#"��� ������ �������

����������#�#��#�"�����

-���:��� �<

[JDENet]maxNetConnections=800

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

1��*���'�"����"��

�"��

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

>ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

1,$

Processing Rule 3 - Kernels on the Server

������� ���"''���#�'���#"����#�������� �����"#��#���� ���'���"''���#

#�����'�&��� �������#��������#������������&��� �#����#��#������

�"#"*�#����*+��#�#������#���+���� �*+��#�$2)�"����������&��� ��$������#�

Page 80: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–58 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

"��#������J�+���"�"�'" �����"'"�����������"��"�"��� �&��� ��'������"'"�

&��� �#��������*��#�#���

����#�#� ����*���'���#"����"���#��#��"��#�������#�#����&��� ������#�*�

�"��# �����#� �������#�"������� �������"�� ��� ���#���"���#�

��� "��* ��&��� �#�����������5���" �* ��*�"��4���������������"��"��# �

���#� �#������*���'�������&��� �*�����"'�"������''"�"��#����*���'

&��� �"��#�����"���� �#"���"��*�������#������*���'�������#"��

@� "��#5#�5�����������5#�5���A��-���:��� ��������������"'��������

&��� �#��������������'�������&��� ����#������'�������&��� �������

���

)����#��"�"���#������*���'��;�"���&��� ������*��#��#������&���

����������������������������������:��#������#��'������

��������"���#���"���#��#������"���#"�����#�����'�����������#�

���"���������������@��9B-A�����"�� #����� �������"�� ��&���

*�'���"��"'"���#���'�������������#"���*��"��#�������

C��� ����������#�#���"����������"�" ��#��#������1�#���#��&

������"��#"����"����-�������&��� �#���������� ��#�#�������&��� �'�

����������"�����#" �#�����:"�������*���'�&��� �� ��������#�#���

$'#��#�����:"����"�������������� ���;���#"� ���"����"���#���

���"'"��&��� ������

������������&��� �;�����������������"�� ��+���� �*+��#�$2)��;��#��#��

#"����)'��� #"� ���"�������"�����#����"�� ��&��� �������#���+���� �*+��#

��#"������� �#��"#�#�&��#�����:#��;��#��''�#���;�����'��#��#�&��� �#����

������#�*��#�&�����������'"��"���#���+���"�"�'" ��'��#��������."���#�"

&��� 5*� ���"�����#���� �����#����"��������#���"#"*�#��#���+�*�*�"��

�:���#���*�������#�����#����'�#����+�*��$�" �#�#���"��#���'� ��"��

�:��� ���#�"������� #�"��C��� I��*�"��� �������"#���������� ��������#�

2���"�����" ��#����#���&��� ��C��� I/��"�"� "����"#�� ������5"�#���

'���#"������"�"�"��#�"�#�� ����*� ���"�������*������#�����������#��������

���"��"����������#"��

�������� �����"��#���������������������������'��"�'���#"����*��#�+���"�"

�##"������ "��* ��#��� ������ �#'���

�:��� �<

Session 1: JDENet_1, Kernel_1Session 2: JDENet_2, Kernel_2Session 3: JDENet_3, Kernel_1Session 4: JDENet_1, Kernel_2Session 5: JDENet_2, Kernel_1Session 6: JDENet_3, Kernel_2

Page 81: Cnc - Jdedwards Xe

Partitioning Application Logic on Servers

3–59OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���������"����:��� ��"�*�������#��������#�"#"�� "#���"��#���'� ��"��

#�* �<

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ0����������� ÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑ)���� ÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑ=��>����4�������

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

1��*���'����1�#

�����

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

[JDENet]maxNetProcesses=3

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

1��*���'�"����"��

�"��

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

> ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

1,$

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

1��*���'��������&��� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

[JDENet_KERNEL_DEF2]maxNumberOfProcesses=2

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

1��*���'��"����;��#5"����������&���

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

> ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

1,$

-������"�'���#"����*��#�&��� �����#���������������������������

When Not to Distribute Logic

������������ �����"��"����"����"#"*�#"��� ��"��"���#��������"���������

����"������:� �"����*� ��<

� �������*�"���'���#"����������#��#����������#��������#��#�"

�;�"���*�����#���*�"���'���#"���"���&���'���#����� "��

��� "��#"����#����#����*�"���'���#"�����#�� ��*���������#��#��

���� ��"��������#���*�"���'���#"������#"���#���������

� � "��#5�� ��*�"���'���#"������#�"��7.)����"�����'���#"���#��#���

�� ���� "��������"�����1����&#�"#����B�������'�#�"����#��*�"��

'���#"����"#"*�#���#���� ��"������������#��� ���*�"���'���#"���#��#

������ ���:���#�������� "��#�

�������������#��*�"���'���#"���"��������#���� ��"�������#������

��&�#��"#���������������#�������#����#��"�����9�#�* ��'������"���

-���:��� ���"'�����#��*�"���'���#"���"��������#���� ��"�������#�������

��"���� ���*��#��#���#��*�"���'���#"����" �*���� ���*�������#������

������#�������"��#�����9�

Issues with Distributing Logic

������������ �"���&������*��#��"#"*�#"��� ��"��������"�����

�:� �"����*� ��<

� B�#������#� �'���#"��� "#�������������* ����"#���"#"*�#��� ��"��

������:"#"�����#����#"������ "��#"����#���*�#������#� �*�"���'���#"��

����#�������"#"��� �'���'����"���������"������* ���"'�#��

��� "��#"����� �#���*�#������#� �*�"���'���#"����"��# ���4�������#��

�� ��" �'�" �"'�#������������#��*�"���'���#"����� �#���*�#������#�

Page 82: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–60 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

*�"���'���#"���*������7.)�����#�#"��������#�*����'�����'��

#��������-���:��� ���#���2����"�������)����#������ "��#"��������#

���*�#������#� �"'� ��"��"��������#��#�������

� �����"�� ����#"��� ��� "G�#"���������#��� ��"���������#����"�

����"��� ��"��#��#����#�"��7.)����"�����'���#"��� "#��

Page 83: Cnc - Jdedwards Xe

3–61OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Business Function Processing Problems

����� �J����'"���* ����#��&������#"���� �#"���� ������� �������

���"�"#�#��#������*�"���'���#"���#��������������� "��#"�������'�

��"������"�������������* �����������#������������� ���##���#

�������#�#��#������ "��#"���������#��#�#���*�"���'���#"�����������)'

����� �������������#�#��#��������������#���*�"���'���#"������&

���������"�#���#���

4����������"'"���"���#������������� "��#��*�"���'���#"�������"��<

� ����� "��#���&#�#"��������#��������#�#��#������ "��#"�������*�����

���������������"���

� B�"���'���#"�������"������#�����������#�#��"�'���#"�������#��

��� "��#"���������������������"���

� ����*�"���'���#"������������������������#���"�����#�������

�����#���� "��#���&#�#"��������#�������"��#���"#��#������������� �

��"��#�*�"���'���#"�������"���#�����������������$� "#�"��#��

�� �*+��#��������"���#��#���������'�#����"�"�� ���������#���������'�#��

������������#����"���'�#����� ���� ��*�����#���

����������'�� #����'"���#"���"�#��#����������������"���'"���

��"���#�������� ��"�#� �#"�����������'"�"����������" ��;�"�

�������#��������9�����"����)'����������#���'"����������������

����'�" ��������������� �������*�"���'���#"�������"���'��

#���'�" �������#��#���� "��#���&#�#"���

�����*�"���'���#"�������"������#�����������#������ "��#"������

����������������"����#���� "��#���&#�#"����������#�#��#������ "��#"��

�����*�#�#��������#��:"#�#������ "��#"��������#�#�"#�

�������*�"���'���#"������������������������#���"�����#��������#��

� "��#���&#�#"����������#�#��#��������B������#���*�"���'���#"���"

���"���#���+����#I&������#���"�������� ��"�� ��'�" �#���*�"���'���#"��

�� �

����� �J��1��� �#"������"�������#���� ����#��#����� ��*�"��

'���#"���'�" �������� �������#�����#"������&"����������������������

'�" �������&��� ����������"�������"���#�������"����'� ��"�������

��� "��#"��������)�����"#"��������� ���"#����������#��#���+��� ��

����������'�" ����������� ��"�������#��#��* ����#�#�����* ���

Page 84: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–62 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��"�����#���"����#��������1������ ��#���'� ��"����"���#�����#��#

�''��#�*�"���'���#"�������"��<

� -�" ���#��������#�#��#������

� B�"���'���#"���'�" ��

� ���������#��������������*�"���'���#"���'�" �������

Failure to Connect to the Server

����� ����"��#�*�"���'���#"�������"���"'�"#������#�������#�#��#��

�"�������������'� ��"����;�������'�#������"*�����#��������"��

#���"�"#"� �#�����'�����##���#�#���� ���*�"���'���#"���#����������

��� "��#"������<

� -"#��#�������� ���*�"���'���#"������������

� ����� ������&�#�����"'�#����������*����'�" �������'���#��

�"��������#������������������#��#���� "��#���&#�#"���

� )'�����"������*�����"��#���#�����#������������� �������#��

*�"���'���#"�����������#����� �*+��#�������#��#����������

������#��#���� "��#���&#�#"���#�����#���*�"���'���#"���

� )'�#������������#�*����'�" ������������� ������#����� �*+��#

������#��#����"�"�� �����#�����#���*�"���'���#"���

)��#���������������'�*�"���'���#"�������"��������� ���##���#�#����

#��� ��"�����#������ "��#"���������� "��#���&#�#"��������'� ��"����;�����

�'�#������"*�����#��������"���#���������#�����'�����"��<

� )'�#���*�"���'���#"�������"#���#������"#������#����"�"�� ������

#���'�" ����� #���#"����#����;��#����*�����������

� )'�#���� "��#���&#�#"����;��#�"���#�����'� ���������*��#��

���������� ��"������#����������#�����#�������##���#����

�������#"���

� )'�#����� ������#����������#�����#��"����#��#����/��#���*�"��

'���#"���'�" ��)'�#����� ������#����������#�����#��"���#����#��#����/�

����� ���������#�#��#������������##���#�#�����#���*�"��

'���#"���

� )'�#���� "��#�"����* ��#���������#�#��#��������#����;��#�"���"��#��

#�����������������"'�����"���'"�������#��#���� "��#���&#�#"���"'����

"���#���'"����

� )'����������*�������#������#��������#��������#��:"#�#������ "��#"��

�����#�#�"#�

Page 85: Cnc - Jdedwards Xe

Business Function Processing Problems

3–63OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Business Function Failure

-"�� ���#���*�"���'���#"���"#� '��"��#����������������������#���"����

#��������)'�#�"�"�#������������� ���"� ������"� ���*�:�"��"��#"���#��#�#��

*�"���'���#"���"����"�����* ����E����"��#������#�����������9

����"�����'":���*���"��#���*�"���'���#"���

Cache on the Server When a Business Function Failure Occurs

)'�#���*�"���'���#"���������#����#���'"#�#"��������� ������&�#�����"'

������������#������#���������"���#���'"#�'�" ����##���#��)'����������"

���#�������#����������#"����##���#�#��#����"��������'�" ������� �

�##���#�#�����#���*�"���'���#"������#�����������������#���� "��#

��&#�#"���

4�������"'�������"����#������#������������� ��"�#��#�#������#���:"#

#������ "��#"�������#�#�����

�������#"����'����������#�������"��"#� �#��#�������"����'�*�"��

'���#"��������� �����#�����������������*�"���'���#"��������#��#����

�������*�;���#�'���#"����������#�����#��"��#����������-���:��� ������

*�"���'���#"����"��#����#������"�"#"� "G��#�������������������"��#�������#�

#��"#��������#�"���"��#������#�����#������"��#�"#�"�#������#�*���

)'�����������#��������"���'#��#���'"#�*�"���'���#"������#��#��������

����#���� "��#���&#�#"���"����* ��#��������"��#���"#��#�����������#��

����#��#����#�"��#����������#����*�;���#�*�"���'���#"��������#��* ��#�

�����#����"�"�� ������������'����"��#�"�����"�������� ��'��������#�

�:"#�#������ "��#"�������#�#�����

Page 86: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

3–64 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����.B������#�* �������"������#"����#�������*�"���'���#"��

�'#����'�" ���������"'�#�������#�����������#�������

Page 87: Cnc - Jdedwards Xe

Business Function Processing Problems

3–65OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Page 88: Cnc - Jdedwards Xe

4–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Environment Setup

����� �����"�����#����"���������'"��������� ��#"����'���"�#��"��"��#"��

#��� ���#"����'���#����������� ���*+��#��$������ �����"�����#���'"�"#"��

���#�"������#��������������#��'��*+��#����'"���#"���9����������"����

��"���#"�����'"���������#��'����"�����#���������#���#����������"�#�"�

����� �����"�����#�

��"���#"������#�"��#���'� ��"��<

� .���#���"������"�����#

� ��&"����"#��������"�����#

Page 89: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

4–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Page 90: Cnc - Jdedwards Xe

4–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding Environments

$������ �����"�����#����"#��'��*+��#����'"���#"���9����������"��

��������#�������������*+��#����'"���#"���9����������"���'����

���"�����#����"��������#��#���'� ��"���;��#"��<

� ����������� ��"���*+��#�������M

� �������������#���*+��#��"��M

������#����������"�#����"#��������"�����#����"�����������#�����#��

;��#"��<

� )�����#��"��#������#����*+��#M

����� �����#���'� ��"���#�����'����"�����#<

� �"#"*�#�����#�������"#"*�#��� ��"�����"�����#

�"#"*�#�����#������ ��"�����"�����#���#��"����������#���"������

�������� "��#"�������"��������

� 9�����'�����"������"�����#

9�����'�����"������"�����#�������"�����#���"�����#������#

#���#����#�����'�#����#"�������"������" �* ���"#������� �<�#��

����'�������"��#�������#������*�#����'�����

� 7�����'��*+��#����"�����#

7�����'��*+��#����"�����#����#� ���"����#��'��*+��#������������

�������#"�������� �����#�����"#"���

Where OneWorld Stores Environment Definitions

$������ �����"�����#���'"�"#"���"��� ���#���'� ��"���#�* �<

� 3"*���3"#����#� �@-��= A

� 3"*���3"#�9�#��@-��=6A

� ���"�����#���#�" �5������ ��@-��=6/A

� �*+��#����'"���#"���9������@-=�>/�/A

Page 91: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

4–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� 2�#�������9�#��@-��=6�A

����'� ��"���" �#�#��#���� �#"���"���'�#���#�* ��"��� ����"����

���"�����#���'"�"#"���

(F0094)

ObjectConfigurationManager(F986101)

EnvironmentDetail - OneWorld(F00941)

Library ListControl(F0093)

Path CodeMaster(F00942)

Library ListMaster

The Library List Control Table (F0093)

����3"*���3"#����#� �#�* ��@-��= A����#�"���� "�����"�����#�'����������

E�����#��"���#�����������#� ��#������� "�����"�����#�'��"��"�����#�

����� ����������"�����#������"���#����������"��#���3"*���3"#����#�

#�* ������� "��#����#������ ��#�#������"�#�#�������� ���"��#�"�����#��

��&#�#"������ ��#�������"�����#�#��#������"���#��"G���#��"�����#�����

#��#����"�#� ������#�������"���#����"�����#����� "#��������" �* �

���"�����#�

�������"�����#�%��""���'����'�#���.��2�'" ����� "��#"������* ������#�

���"'��#���������������#��"G���#��"�����#�����"'"�����"�����#�

The Library List Master Table (F0094)

����3"*���3"#�9�#��#�* ��@-��=6A����#�"��#���������'�#������"�����#����

#������"�#"���

)'������ �������� ���'#�������:"#��������������#���3"*���3"#�9�#�

#�* ��*�#�����*�#�������#��B���"����:"#"����� ���'#�������"�����#

���������������#������#����� "��#���:"#"��������'" ��"�'���#"���

Page 92: Cnc - Jdedwards Xe

Understanding Environments

4–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

The Environment Detail - OneWorld Table (F00941)

��"�#�* �����#�"��#������"�����#����������#������"�#�����#�������'���#��

2�#�������9�#��@-��=6�A�#�* ��

��������"�����#���#������������"�#�����#�����������"�����#��������

#���������#��������-���:��� ���#������"�����#�������������#"����*+��#

����������"''���#���#�� ���#"�������"������"���� ��*��#�������"'����������

������'��������"������"�#���#������������#������������������'

�������"������"�#���#�����������#���#� �����

The Object Configuration Master Table (F986101)

�����*+��#����'"���#"���9�#��#�* �������#������ ��"���*+��#�����"���'�

��������"�����#����������"�����#���#��������#"��"��#����*+��#

���'"���#"���9������#�* �����"�"�#��������"'�#�������"���'��#��

���"�����#����"���#"�� ���������"�����#��"��#�������"''���#���#������

*�#������#�����������"���'����#������ ��"���-���:��� ������� �������

#�#����� ��������"''���#��#��'��*+��#�*�#�#��"���#��"�"��#���������#�*��

����#��"� ��"�������� ��� ��

The Object Path Master Table (F00942)

��"�#�* ��#���#��� ���#"����'�#�����#������J����#� ��*+��#��#���� ���

���"�#����"#��#�"���#�������������#�����#�" �

Coexistence Considerations

)�������:"#��������"�����#�������� ���'#������������� ���;�"�

�����#��#�������#�* ���������#���'"���#��������#�* ��"���� ���'#����

��* ��#��#�������#������������#���"������� �������#�*���������*�

�� ���'#���J�%27�����������������#�����"���"�����$�,6���������

*������#���$�,6��������#���������� �J�$�������� �����9"���'#��H3

�������#�*���'���#�

����'�������������"�"#"� ���#�����������:"#��������"�����#��� ������ �

#�* ��#��#�#������"�����#�"�'���#"���@-��= ��-��=6��-��=6/������-��=6�A

��#�*�����#������#���$�,6���

�"�" � ���"'������ ���#�����#����#������"'"��#"���#��#���������*�

�� ���'#�����������#����#�������������#�* ���"���#���$�,6�����#�*��

#��#���������#����#��#����#�* ��"������� ��

)'����������;��#"�������������*��#��##"�������������:"#����

���"�����#�����#��#�������������� ��"�����#���������#�����������

�����������#�#"���

Page 93: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

4–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Page 94: Cnc - Jdedwards Xe

4–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Working with an Environment

E����������#�����������"�����#��"#���*�����"������������"�����#���*�

����"�������:"#"������"�����#�

B������#����*+��#����'"���#"���9������@��9A�����"���������"���#��#

� ����#��'�#������"�����#����#��"�"���#��������"������ ��*���������'"#

#���"�����"�"������#���#�����#�����������"�����#������������:"#"��

���"�����#�

��������������������"�����#��#��#����"�����#J���9�����"���������"��

� �����"#��#������"�����#��)#���&������#�����#�����������"�����#�*�

����"�������:"#"������"�����#������#�����9�����"���'��#������"�����#

�������#�#�����#��� �� ����#���#�������"����'�����:"#"������"�����#�

-���:��� ��������� �����#����"�����#�������#�#"������"�����#��"��#

���#�"������"�" ������"����"#���� ����'����"''�������)��#��������"#�"

��"��#�������������"�����#�������������� ��#�������"���#��#�����"''���#�

���#����#���������������� ���������������"�����#��#���#��������"�����

�:"#"������"�����#���������������#����#�#��������#������"�����#J��*+��#

����"���

-���:��� ���"'���������##"������#�������'���������"������"������"��

���������"�����#�*������#�����9�����"���'��#���#�������'�������

������� �#� ���"''���#�'���#�����9�����"���'��#����"��#�������#����

C����"���"���#��#��������������������"�����#��"#���#�����"�������:"#"��

����������#����#��#�����9�����"�������� ���-��#�"�������"#�"�#��"�� �

��"��#�����#�����������"�����#�*������"�������:"#"������������#���

��+�#"���#�����9�����"���"�#�����'����#"���#����� ������ ��

��"�#��"�����#�"��#���'� ��"��<

� $��"���������"�����#

� ����"���������"�����#

� �� �#"���������"�����#

� 2���"�����#"��<����"�����#�9�#��@2��=6A

Page 95: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

4–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Adding an Environment

$������������"�����#��#���#��������"�������:"#"������"�����#���������

�����#����#�#��������#������"�����#J���9�����"���

������������6�������

/� ���#������"�����#������@74=�8 A�����������"�����#�9�#�

@2��=6A��������&��"#�����"�����#�'���������

)'�#����"� ����� ������� �����"�����#���#"���"�����&����#�"�'��

�"� ����� ��#�������"�����#�#��#�����������#��"��#������"�����#

��#�" �5������ ��#�* ��@-��=6/A��)'�#�����#"���"���#�����&����������

����#�������:"#�������#��"��������" �� ���������$�,6��� "*�"��

�� � "�&�$�����������"�����#�%��""���'���������

Page 96: Cnc - Jdedwards Xe

Working with an Environment

4–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ���#������"�����#�%��""���'�������� �#��#���'� ��"���'"� ������

#����� "�&��C<

� ���"�����#�1���

� ���"�#"��

� 2�#������

� %� ���

� ��#�)���"���)�#� �#"��

� ���� ����@E,1A

� �$1����'"��������"�����#

$#�#�"���"�#�#�����" �*�����������"�����#�"��#������"�����#�9�#�

#�* ��@-��=6A��-��#��#��������"�����#���������"����#���"��#��

���"�����#�2�#�����������#�* ��@-��=6/A��

6� )'�#�����#�������������#�����#������"�����#�%��""���'���������#

�:"#���������#��������"��#������"�����#�9�#��-" ��@-��=6A��#��

�#����"� ���#�����#���������� ��#"���'���

�����#�"�'�������������� �#��#����3���#��������'"� ��

�����#������#�����#�������������#�����#�"�'���#�����#���*+��#

3"*�"�����9�����"���'��#����������"�����#�������#����"#��#��

�;�"��������#��#����*+��#����'"���#"���9�#����* ��@-=�>/�/A��

)'�#�����#�������������#�����#������"�����#�%��""���'���� ����

�:"#�"�����#������"�����#�������#����#�����#��"���#�����#�

�����#��#�"����"�#����"#��#��#����"�����#J��*+��#�3"*�"�����9

Page 97: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

4–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�����������#������#�"��� ���#�����#�������������"��#����*+��#

3"*�"����*+��#����'"���#"���9�#����* ��@-=�>/�/A�

8� $����#����*+��#����'"���#"���9����������"����-������"�'���#"���

�������������#�#�� �$���������������������

����� ���������

���"�����#�1��� ������������"�#����"#�������"'"�� "#��'� "*�"������

�=�)1)�$�"�"#"� ����������#���� "*��� "#������#�

���#� ����"�����#�#��#����������"������#�������

���'"���#"����'� "*��� "#������"�#�"����"��#���3"*��

3"#�9�#��#�* ��@-��=6A�

-������� ���#�"�'"� �������#����� "�����"�����#

#��#�����*������#���������� ����������"�����#

���������*�#������#�������@�*+��#A���������#������

@��#�A���������#�#���#���������������� "����&� ���

�"#�"������� ��

���"�#"�� $������'"��������������&�

2�#������ ����2�#�������"�����"�#��#�����#��'������ ���*+��#�

����"�����#��&����#��&��'��#��'��*+��#�����#��"

���#"����"#�"������� ��

%� ��� -���� ���#���� �������*������'"����"��#�����'#���

?�"���%���"#���

-������� ���#���� �������*������'"����"��#��

%� ����9�#��

��#�)���"���)�#� �#"�� .��#�"�'"� ��#��#����1,�--�+�#5"�5#"���"�#� �#"���'�

�������"�������#��#�"����"�����#�����"���#��"��

+�#5"�5#"���"�#� �#"����--�*�'�������#��'�����"'"��

��� "��#"���"�#��#��������#"�����#����������������

�����'� ��#�#���#������ "��#"���������������'�

�����#"������#�����"���#�������������������#��

+�#5"�5#"���"�#� �#"���*��&��1�

���� ����@E,1A $�����*�#��'"� ��'��#���)�#� �7�����-�#������

�3���#������� ������#������������

�$1����'"����

���"�����#

��"������� ���#������#��"��"��#��#��#�#�"����"�����#

"�������"�����#�#��#�"����'"�����'��#����$1�

/ �$1����'"��������"�����#

B ��& 1�#����'"�����'���$1

Page 98: Cnc - Jdedwards Xe

Working with an Environment

4–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Copying an Environment

������������#�����������"�����#�*������"�������:"#"������"�����#�

����� ��� �����"��#����*+��#����'"���#"���9����������"������"�#��

�"#��#����:"#"������"�����#��E��������#����������"�����#"���"'��������#

#�����"'�����"#"��� ��*+��#����'"���#"���9����������"���#��������#�#���#"��

#��#����������#������"�����#�

E���������������"�����#�'������������:"#"������"�����#�����������

���#���)�#� �#"���2 ��������"������"������ �������#"������"�����#

�������������#��� �#��������#��� �#�����#�"������#�������"���'���

�����������#�* ��

������������6�������

/� ���#������"�����#������@74=�8 A�����������"�����#�9�#�

@2��=6A��������&��"#�����"�����#�'���������

)'�#����"� ����� ������� �����"�����#���#"���"�����&����#�"�'��

�"� ����� ��#�������"�����#�#��#�����������#��"��#�������� �5�� �

���"�����#���#�" �'" ��@-��=6/A��)'�#�����#"���"���#�����&����������

����#�������:"#�������#��"��������" �� ���������$�,6��� "*�"��

�� ������������"�����#��������������������"�����#�'���#���%��

�����

Page 99: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

4–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ���#�����������"�����#�'����#����������"�����#������"��#���1��

���"�����#�'"� ��

6� ���������� ��#���K2.B3)���*+��#����'"���#"���9����������"����'���

���"�����#�������#��#�#��������K2.B3)��%������� ����#"���"�#����

����3�����#�"���#"���#������''�#�����������"���'��#������"�����#�

'��"��"�"��� ��*+��#������'��K2.B3)��

8� � "�&��C�

$#�#�"���"�#��#�����" �*�����������"�����#�"��#������"�����#�9�#�

#�* ��@-��=6A��-��#��#��������"�����#���������"��#������"�����#�2�#�

���������#�* ��@-��=6/A�"����#�������� ������#��'�����"���"��#��

�*+��#����'"���#"���9������#�* ��@-=�>/�/A�"��#����#�����#�������

������"��������������"�����#"����#�����"��#�� ��*�����#��'

����"���"������������#��������

>� ����������#�����#�������'��#������ �����#������"�����#��� ��#�#��

���"�����#�'���#�����&��"#�����"�����#�'��������������#�����#�

�����

!� 9��"'���#����*+��#����'"���#"���9����������"���"'���������-�����

"�'���#"�������������� �$����

����� ���������

1������"�����# ������������"�#����"#�������"'"�� "#��'� "*�"������

�=�)1)�$�"�"#"� ����������#���� "*��� "#������#�

���#� ����"�����#�#��#����������"������#�������

���'"���#"����'� "*��� "#������"�#�"����"��#���3"*��

3"#�9�#��#�* ��@-��=6A�

-������� ���#�"�'"� �������#����� "�����"�����#

#��#�����*������#���������� ����������"�����#

���������*�#������#�������@�*+��#A���������#������

@��#�A���������#�#���#���������������� "����&� ���

�"#�"������� ��

Copying a New Environment to a New Path Code

����'� ��"���#�&����"*��#���#��"�� �����"���'�����#�����#��������'��#��

#�����#��������#�#����"�����#��"#���������#�� ���"���"����������#��������

��"�#�&�"��"�"����"�#��#���'� ��"����������<

� ���#��#�#�*�#���'" �

� ��������������"�����#�#����������#������

� ?�"'����#�������������9�����"���'������������#������

� ���'"��"�����B���"��

� .���#��#���$�,6������������"#��#����������"�����#

Page 100: Cnc - Jdedwards Xe

Working with an Environment

4–13OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� $���#���������#����������#���$�,6��

����������������������

/� %���&���#�� � "���"��#���3�$�$33������������'" ������'���#���#�#

�#�"��#�������'���#���#��������#��

�� �����#���3�$�2%���#����3�$������B$��'" ��������������#��

�����"�#�������#��#��#��������������#���"��#����������B$��'" ��

� %���#���3�$�$33�B$��*�#������ "��#"���

6� $���#�����#����������������"����������#�� ��J�� ����

���"�����#��-�� ��"�� ���#�������������" ���*�* �����#�B�"��

��#����#�����#� ��*+��#���#������� ��3��� ���#���������#� ���* �

��#�

9�&�����#������ �����#������������#����#������#� ��*+��#���#�

���������#���3�$�$33����"'"��#"���������#����

���������������6�����������������������

/� ���#������������#������������"*���"������������#��#�������

�� -���#������"�����#������@74=�8 A�����������"�����#�9�#�

@2��=6A��������&��"#�����"�����#�'���������

� ������#������"�����#�#��#���#�� �� ����#����#��������������#�����

��������������"�����#�'���#���%���������9�&�����#�����#"���'�

K2�* "��%������� ��"��#�"��#����������������#�

6� � "�&�� ���#�����*��&�#��#�����&��"#�����"�����#�'�������� "�&

-"���������������������"�����#������������#�����#�������#��#������

�����������#���"��#���/��� "�&��C�������������'"�"����

8� ?�"'��#��#�#�����#������������������*���:"#"���#��#������"�����#

�����@74=�8 A���������"������"�����#�9�#��@2��=6A����"��

���6�����������������������07�����5����������������������

/� ���#�����#���)�#� �#"������ ������@74=>/A����������#��

)�#� �#"���2 ���@2=��6�A�

�� ����������� �������#�����������:�����'���#���%��������

� 4"�� "�����#�������<������ "�&��� ��#��������#��������2 �����'��

������

6� �����#��������2 ���������* �5� "�&�����#�������������������#�

������%��""���'���������

8� �����#��������%��""������������#�*���2����'���#���-��������

������&��"#����* ��������#���"G"���'���������

Page 101: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

4–14 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

>� �����&��"#����* ��������#���������"G"�������������"���'���#��

%�������������%��"����* ��������#���������"G"���'���������

!� ���%��"����* ��������#���������"G"����"'��������#���#�����#������

�����������"��#���'"#�#�&���#����#����* ��#��/�������#�" ��#�#��#�

/���� "�&�����������#����� "�&������ �

�� ���������"�����#�'���#���%���������-��#�������#�#����"�����#�

�#�3�����������#��#������ "�&������

=� ������#����������"�����#�������������#��3����'���#���%��������

?�"'��#��#�������� ���"����������#�����#������������ ��3��� ���#�

� "�&��C�

/�� %�#���#��#������"���'�������� "�&������

//� ���������"�����#�'���#���-������������������������"�����#�

/�� ��������9�'���#���%���������9�&��#��������"�#����9

���"'"��#"��������#����� "�&�������� "�&������ �#���:"#�#���'���

��������5������;0����6���

/� ���#�����#���)�#� �#"������ ������@74=>/A��������)�#� �#"��

��&*�����@2=�6/A��

�� -"�������� ��#�#���� ���

� � "�&�1�:#���#" �#�����#����������&*�����'���"��"� �����

6� ���������'"������B��'���#���%������������'"����#�����B��'�

������'�#���'�����#�������

8� ���������'"����'���#���-������������#�������1�:#�'��#��

���"�����#���&*������������#������'"������#"���

>� � "�&�1�:#�#�����#"����#������#����#��'�#���)�#� �#"�����&*����

��#"���

!� $"���#����������&����#��#�������������� ���#������&����#��#��

��&#�#"���

�����������1�(<++����6�������������������6�������

/� ���#�����#���)�#� �#"������ ������@74=>/A����������#��

)�#� �#"���2 ���@2=��6�A��

�� ���#�����&��"#��2 ���'��������������� �������#����������4�#

'���#���%��������

� ������#�����#�����������%��"�,4�#�'���#���%��������

6� ���������"�����#�'���#���-�������������#��������#������

���"�����#�#��#����"��������#������"�����#�����������

8� �������������#�#���4�#�2 �����'����������%��"��4�#�'���#���%��

�����

Page 102: Cnc - Jdedwards Xe

Working with an Environment

4–15OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

>� ������7����#������9���'���#���-��������

����������������������������1�(<++

/� 9��"'��#���3)B%$%E�'" ��"��B! ,��#,�6��,��#���������#��#�"#���#�"��B! /�E����#���'"#���#���$���#���������'��������#����������

��� �� "&��#�������������2�! ��2E! �����������

�� .��#����1�1��������3%)2�������������#���$�,6���#������B! /

��"���

� �"������#��#���$�,6�����H����-%�

6� �������������#���B! /�E���B! /1��������B! /��3� "*�"����#��#

���������#���#�����'#��#����=���/��+�*����

8� .��#����3%3)B���������������#��� ���#��������� "*������#��

$�,6���

>� .��#����47�.%3)B�������#���������#�������#� "*������#���$�,6��

#��������

!� .��#���-�2���� �����������������������#��#��'��'" ��'������

��� �����#�����

�� �"������������������#��#���'� ��"����������<

� cd x:\jdedwardsoneworld\B733\hosts\as400\enterpriseservername

� get ftpinput (replace)

� cd..

� bin

� get jdesav1 (replace)

� quit

=� ��#��#���'� ��"��������������#���$�,6��<

� RSTOBJ OBJ(J98OW10 J98OW20) SAVLIB (JDEOW)DEV(*SAVF) SAVF(JDEOW/JDESAV1) MBROPT(*ALL)ALWOBJDIF(*ALL) FRCOBJCVN(*YES *ALL)RSTLIB(JDEOW)

� SBMJOB CMD(CALL PGM(J98OW10)PARM(’deploymentservername’ ’JDEOW’))

/�� $'#��#����=���/��+�*����� �#����� ����#���B! /�E���B! /1�������

B! /��3� "*�"���"#��#����������������"��#���6�

//� �#�#�#�������� ����"����"#��#�����%1�����������

/�� %���2�%������������������"�����#�#����"'��#��#�#���������&"���

Page 103: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

4–16 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Deleting an Environment

����������� �#��������"�����#��#������"�����#���'"�"#"���"�����������

#����*+��#����'"���#"���9��������������"�#����"#��#������"�����#���

�� �#����E��������#�������"�����#"���"'��������#�#�����"'�����"#"��� ��*+��#

���'"���#"���9����������"���#���� �#������������� �#��#������"�����#�

��������������6�������

/� ���#������"�����#������@74=�8 A�����������"�����#�9�#�

@2��=6A�

�� ���#�����&��"#�����"�����#�'����������������"�����#������� "�&

�� �#��

Processing Options: Environment Master (P0094)

Process Tab

���������"�����#"����"����������#��' �:"*" "#�����������"������� �#"��

*�����* "�������#�����"'�����#�����������#����*" "#��#����������� �#����9

����"���'��#�"����"�����#�"���#�����#�������

%���� ���'����#�������#��'��#��������"�����#"��������� �

��#���#"�� �����"������ �#����9�����"���'��#������"�����#�������

�"������������"�����#"����� ���������#����#��"������#���������������

���� �#������"���"���#�����#�������

1. Delete OCM Mappings

.��#�"�����"�����#"���#��"��"��#�����#������������ �#���*+��#

���'"���#"���9����������"���'��#�"����"�����#�"���#�����#�������

?� "���� �����<

B ��& .�������#��� �#����9�����"���

/ .�������� �#����9�����"���

2. Copy OCM Mappings

.��#�"�����"�����#"���#��"��"��#�����#����������������*+��#

���'"���#"���9�����������'��#�"����"�����#�"���#�������������#�

������?� "���� �����<

B ��& .�������������9�����"���

/ .�������#��������9�����"���

Page 104: Cnc - Jdedwards Xe

5–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Data Sources

����� ����#����������#���*�" �"���* ��&�#��#��������#���#�����

����� ����#��"�����'"���#"������#���������'"���#������� ��� �#��

��#�*������� ��"������"����;�"���*��#�������� �����'"���#"���

��"���#"������#�"��#���'� ��"��<

� .���#���"�����#������

� 2 ���"�������� ����#������

� ��&"����"#����#������

� %���"�����#����������#

Page 105: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

5–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Page 106: Cnc - Jdedwards Xe

5–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding Data Sources

����� ����#���������'"��������������#�*���#�* ���"�����������

����� ����� ��"���*+��#�'��������#��"�����#�������������"�#�#�<

� $���#�*���"�������"'"�� ���#"���@'���:��� �����9"���'#�$���

��#�*�������������B!�9�B� ���#���"��LB!L�$�$�������$�,6�����#�

"*����������2%���$�$A

� $����"'"������"���"��#�����#��"��#��#������� ��"�

��#���������'"�"#"������#����"��#�����#��������9�#��#�* ��@-=�>//A�

��&#�#"�����������������#��������9�#��#�* �����"�������� ���"���"�

#����#�����#����������#�����#��"������������ ������#��#�����

��"�������;��#���#���;�"��#��"�������";�����'"�"#"���'������� ����#�

����N�#���'����#���������#��"�������#��������9�#��"��#����������

��#�������

���������#� ��#�#����#��'�#�����#��������9�#��@-=�>//A�#�* �������

�"���"�������#� "G����#�����#����������� ��&��#���������#��"�����

�����������*����&#�#"��������"��������������#����������"�������� ��"�

�����;�"��

��"�����#�����"*��#���'� ��"��<

� .���#���"�����#�*�����#������

� .���#���"��� ��"����#������

� .���#���"���#����;�"�����#�������#���

Understanding Database Data Sources

$���#�*���"�������"����'�#�* ��"������#�*������������#��#����E�����#

"���#"'����#�*���#����� "��#"���#��#������#�����E��������"#"*�#����#�*��

��������#��&�����"��� �����"�������������#�*������������#��#���

$���#�*�����#�������"���#"'"��#������� ��#�����#�*���"�'���#"��

����� �������#��"���#"'������������#�#������#�*���

Page 107: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

5–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����'� ��"���"���#"'"�����"���#��#��������'"�"�������#�*�����#������<

� ��#�����������

� ��#�*�������

� ��* ������

� 1�#��&�����"�������

� ���B��������

Data Source Names

E�����'"��������#��"���#"'��#�����#��������E������ �����������"��'�

�����'��������#��������-���:��� ���#��"��"��#��#��#��������#�"��

*�"�����#��'�������#"�������������#��������������� ��*�<�B�"��

��#��5�2���������#�"���"�" ��

��������������"��������#�#"�����#�������������#�"�#� �#"������"��

�����������'������������#������������#��� ����� ����� ������������� ����� ����� ����.���������������'������"�'���#"���

Database Names

������#���������'"�"#"�����#����#�"��"�'���#"����*��#�#�����#�*�������#��

����"����"���"#�"� ���#�����"''���#���#�*������������#��#���"���#"'��#��

��#�*���"���"''���#������-���:��� ���������#�"���#"'����� ����#�*���*�

#������ ���H3K1�#�?���������#�#"����E�����#�"���#"'����#�*���#��#����

�����#��������B��*��#�����B����#������������

The Table Owner (Object Owner ID)

��� �������H3��������#�*������������#��#����������";���#�* ������

)��'�������������'�#�* ���-���:��� ���#�����#�*���#��#����#�"��#����#��

#�* ���"��#��������������������B! �E���E�����#�"���#"'��#���#�* ������

)��'����� �������H3��������#�*������������#��#���

The Network Machine Name (Server Name)

��#�*������������#��#����"������������"����E�����#�"���#"'��#�"

����"���#��#�����#��&���#��#��#��������#�����������"#��������E��

��#����"���#������� ��@"��#�����#���������'"�"#"��A�#�������"��������'�

#�������#��#���#�#�����#�*������������#��#���"����"���#�����#�*��

�"���

Page 108: Cnc - Jdedwards Xe

Understanding Data Sources

5–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

JDEBase (DLL Name)

�����������*�''��#���*�"���� �#"���'���#���#����� ������������B��

�"�� ����������#����"������#��'�$2)�#��#��� ����H3��"''���������

�� #"5��������#�*������������#��#����E�����#����"�#��#�������

���B����������"#��#�����#���������'"�"#"����-���:��� ���������#���

��B��B���33��"#��9"���'#��H3��������B�,6��������9"���'#�$���������

������#�� �#��#�������"����#��9��"�� �#"���3��������@�93A��;��#�"�#�

�����"�#���H3�#�#����#�������&��"#��#���#�"�5��#��������"��#"��

�'#����#��������"��#���;��#�����#�����#��&�

Understanding Logic Data Sources

$� ��"������"���"�#�������"��������"���*�#������ "��#"���������#��*�"��

'���#"�������E�����#�"���#"'��#���� ��"������"���#������� ���"�������#�

�������'"�"#"����������#���������'"�"#"�����#�"�� ����#�����#��&

"�'���#"����*��#�#�������"��������������������� "&��42=����

���������"��� ��"���*+��#�'���"#"*�#�������"��������� �����#��

����"�����#�������@�"#"*�#�������"�����#������A���#���#���#� ���#"��

'������"��� ��"���*+��#�

Understanding the Required Data Source Types

E�����#��#�������"�"�������*���'���#�������'������� ��#���������

�'�#����;�"�����#���������'"�������"���#��#������ ��"��"��#�����#��"��

�����#�����#���������'"�����"�����#�*�������"��#�����#��"��

E������ ������#����#���'� ��"����;�"�����#������<

� �"#"*�#���2���"���@ ��"�A

� 3��� �@ ��"�A

� B�"�����#��@��#�*��A

� ���#� ���* ��@��#�*��A

� %�� "��#���3��� ���#��@��#�*��A

� ��#���"�#"�����@��#�*��A�

� ��#���@��#�*��A

� �*+��#�3"*�"���@��#�*��A�

� ���#� ��*+��#�@��#�*��A�

� �����9���@��#�*��A�

� ?�"���@��#�*��A

� $�,6�����#�������@��#�*��A

Page 109: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

5–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��������� ��"�#� �#"����'#�������"������ ���'�#�����;�"�����#�

�����#��*�" �������#������'"���#"��������#��� ����� ����� ���������'����#�" �

Distributed Processing Data Source

��"���#���������'"�"#"������#�"��"�'���#"���#��#������ �����#��"���#"'�

#��� ��"������"���"��#�����#��&��E��������#����'"�������� ��"������"������

��#�������

Local Data Source

��"���#���������'"���#�������� ����&#�#"����.��#�"���#�������#�

���"���#�������� ���#"����'���*�#������ "��#"���#��#������������"��#��

�*+��#����'"���#"���9������#��������#�������

Business Data Data Source

��"���#�������"���������������"�"�������*�"�����#��"�#���� #"� �

������� "*�"�����"��������"������#���������#��"����������

�"''���#�����������������'���#���;�"��������#����#�������

������:��� ���'�*�"�����#��"�� ���<

� 2����#"�����#��@���#����"�� ���#���������'"����"� ���������'��#�"��

��#�A

� ��#���#�

� �������#��@�����#�#"�����#�"�"�����#�A

� ���'������%����2" �#�@�%2A���#�

��������� ��"�#� �#"��������������"��������#�#"�����#��#��#��������

�����#������#�����#���#�*����������#������������"�B�"�����#��5�����

Control Table Data Sources

��"���#����������"#��'������'"����������������������:#����*��

Replicated Local Data Data Source

��"���#���������"�#�#��#���9"���'#�$������#�*����������'����"#�����

���#�����&#�#"�������������#��'��� "��#��� ��� ���#������������#��

#����#"������� �����������@'���:��� ���#�������'������#���#�����"��#

������#A�����������'"������������������#�* ����� ���"���"����9"���'#

$������#�*���'" �����#�����&#�#"����%�� "��#��� ��� ���#��"�*����#������

����#�������#�����&#�#"���"��#���'� ��"�����#�<�*!,�#�����,��#��

Page 110: Cnc - Jdedwards Xe

Understanding Data Sources

5–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Data Dictionary by Release Data Source

��"���#�������� �������#��#�������� ����#���"�#"�������#��#�* ��"���

���#� � ���#"���#��� �����"�����"�"#�#"����'���������7����#������#�

#�* ��#���#���#��'�������#���"�#"�������#�*����E������ ������������#�

�"�#"�����*�#��������������#"���@������2�! A��������� �����#�@�����

�?! A���#������������� ��� ���������#���"�#"����������#��������*�#

�� #"� ����#���"�#"���"�������#������������������#����������#�

�"�#"�������#�������"�������*��*���� �������*���'���:��� �����#�

�"�#"�����5�B! �����#���"�#"�����5�B! ��

System Data Source

��"���#����������"#��'�#���#����"�� �#�* ���������#������ ������ �

��� "��#"����E�����#��#���������#�����#����������� �������������"��

��� "��#"����#����#���#�* �����"���#���'� ��"��<

� ���"�����#���#�" �@E������ ������#����#��#���$�,6���'�����:"#����

�"#���� ���'#����A

� .����'" ��������'������@E������ ������#����#��#���$�,6���'�

���:"#������"#���� ���'#����A

� �*+��#�����"���@ ���#"����'�#�* ���*�#��������������*�"��

'���#"��A

� ��#���������'"�"#"��

� ����� �����"#�

� 1�:#�)��@����'������ �����#��� �A

$ ���&#�#"�����������#� ��#��'��#���#�* ����� ��#����������

��#��"�������*�#���#����������� �����#����������� ��"�������;�"�

"#������*�#��'��#���#�* �������������#���#�* �����#����"��#��

����������#������������%#������������&��������

Understanding System Table Caching

����������'"#�"������������ �����#������)���������"�����#�#�

�#"����"�'���#"���'���#����#���#�* ��'��#��#�����������"�����#�

����� ��������#�"�"�'���#"���"�����������#�����&#�#"����$���#"����

�������"������#��#������#� ��#���#�* ��������"������"����'�#����#��

"�'���#"��������'��#������&#�#"����"#�������#"�������� ���"���

How OneWorld Connects to the System Data Source

���������� ��#�#��������&#�#"��������� ���##���#�#��������#�#��#��

*�����#�������'�����"��#�����&#�#"���+���"�"�'" ���)'�#�"���#�������"

�����" �* �������� ���##���#�#��������#�#��������������#�������'�

�#���"�'���#"����)#�"�"���#��#�#�������������'�����"���#��#�#��

� #���#���#�����#������� ���#"������#�"������#�"�'���#"����E������

Page 111: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

5–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��"�#�"������ #���#����#������J�"�'���#"����"���#�* �������"�������#�

�� "��#"���

����+���"�"�'" ����� �� ��&� "&��#���'� ��"���'��#����"�����#�����#������

������#"��<

[DB SYSTEM SETTINGS]

.

.Default Env=DEMOB7ADefault PathCode=DEMOBase Datasource=System B733Database=System B733...Secondary System Data Source connection

[DB SYSTEM SETTINGS - SECONDARY]Base Datasource=Access32Object Owner=Server=Database=Access32Load Library=JDBODBC.DLL

��"���"�#� �#"����#����#�����#�������"�#"���#����� �����"#��#���%� ���

9�#����� "��#"�������'"��"���#���� ��������#��#����#���"�'�'" ��������"��

#�����&#�#"���"�#� �#�����#��#���+���"�"�'" ��

See Also

� ������� �$���7�������������� � �$���

� �$��� ����� ��%��#��� �%� ���"��#��� ����� ����� ����.�������������

Object Librarian Data Source

��"���#���������"�#�#��#����*+��#�3"*�"���#�* ���������'����#��

���� �����#��E������ ��������� �������#��'��*+��#�3"*�"���#�* ����

�'#����� ��������� ���'������������#�������@�#��'����#� ��*+��#A����

��"�#�"�����"���#������������"��������������������5����#���� �#'���

�����*+��#�3"*�"�����#�������"�������*��*���� �������*���'���:��� ��

�*+��#�3"*�"���5�B! �

Central Objects Data Source

��"���#���������"�#�#��#�������� ��������*+��#�@���#� ��*+��#

���"'"��#"��A������ ���#���.�����"���#�* ��@-=�=8�A�����#� ��*+��#���#�

����������#�*���

Page 112: Cnc - Jdedwards Xe

Understanding Data Sources

5–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

)'������������ #"� ����#���������������#������������#�����#� ��*+��#���#�

���������� ��������&��*+��#���#��'������#� ��*+��#���#�������'�

���"'"��#"���������#������� ��������&�"��#����*+��#��#����#������"��#��

�*+��#�'���#������� ���J���&#�#"���#��#���� �#"��� ���#�*���#�* ��"��#��

���#� ��*+��#���#��������E�����#��#�����������#� ��*+��#���#�������'�

�������#��������������"���������'"���#"����'���:��� ������#� ��*+��#�5

2�! ������#� ��*+��#�5��?! �

-���:��� ���������#�����������#� ��*+��#���#�������'�<

� 2"#"����*+��#

� 2����#"����*+��#

� ���� �����#��*+��#

E���������#���������#� ��*+��#���#�������#������#�����������*��#��

���"�����#�#��#��������#���'���������'"���#"������"���#���������#

�"���"�����H3���������� ����#�*�������������"���������

����������5����#���� �#'���#��#��������#������#�*����-����'������

����#�* ������������������� ��&�����������#� ��*+��#�"����� ��.1)F��)'

�������'"���#"���������#�"�� ������.1)F���#��"�������������� ����

9"���'#��H3����������� �����#������ �����#�����

Storing Object Librarian and Central Objects

�����*+��#�3"*�"�������#������#� ��*+��#���#������������"�������"#��

��� ���������9"���'#��H3������������*+��#�3"*�"�������� ���"���"�

�B�,6�����������*�����������"�������#��'���#������#� ��*+��#���#������

@��"����"��������� ����9"���'#��H3�����A�

�������������������<

� -��*�"�����"#�������� �,.1)F�� �#'����#���#����*+��#�3"*�"��

����#������#� ��*+��#���#�������"����� ����#���"���#���#������

������� �����#����J���� ���������9"���'#��H3��������#�*���

� %���� ���'���"�����#�*���"�#�"���#���� �#"��� ���#�*���@%�BA

��������#��'�#������#� ��*+��#��������#�#���#�����������"��

����������������#����#������ �����#�����#��#�"�����"* ��#���

��&#�#"���'����� �����#��������� �����#������'��������������

���������#�"�������������#�#������ �����#�����

Server Map Data Source

��"���#����������* ������#�����#��'������� ��"������"#������*�#��'

�#���#�* ���� �����������#�* ������������#�* ������;�"���'������

��"�������E�����#���"�#�"��#����#�* ��#�������"�#��"#���"#��#��

��&#�#"��J��#���#�* ��

Page 113: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

5–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

.�������9�����#�������#���#�* "����";����*+��#�����"���'�� ��"�

����������*�#���+�*�����*�"���'���#"������"������#��������;��#

��#���#���� ��&�#��#����*+��#����'"���#"���9����������#�����#��������9�#�

#�* ��"��#�������������#����������"�"��������*������#�������"�����

�"''���#�

-���:��� ��������������"������#��������"�����#�#��#�����#�#"�� ���

��#�����#�����&#�#"���������"��#����#"�����#��#��#������������#�����#�

*�"���'���#"�������*�#���������#��#�����������������#����� �

��������������"#������'"����������#�:�� ��������#���#�#"����#�����"�#

#�����&#�#"��J��� "��#�����#����������� "�&��C�#����#��#����������"��

���#����� ��������#����#��*�"���'���#"������#��������������#�

*�"���'���#"���� �������#����#"�����#�����������'�#����� "��#�����#���)#

������#���&������'��#�����#��*�"���'���#"���#�����*��&�#��#��

��&#�#"���#���#"���������'"�������������#�:�"�'���#"��N�#���'����#��

���������*+��#����'"���#"���9������#�* ������� ���#��#��#��������"�#�

������#��������9���#���� "&� ���#������������'"����������#�:�� ������

���������#�����* "����#�* ��'�����"���#�����&#�#"��J�#�* ����

�� "��#��������&�.�� ������"��#���������������������������'�"�'���#"����*��#��� "��#"���#�* ��

����'� ��"���#�* ��"��#��������9�����#�*��������";���#�������J

�����#"����'�����"��<

�����������7����

�!"#$$%

������* ������#���;��#���#��'����#�����������

��#��"���#�����������B���������#��#�����#�

�������'"�"#"���"��#�����#��������9�#��'" ��"��#��

�����9�����#�������

-���:��� ������������&#�#"����;��#���#��'�����

��� ����#�*����#�����#���������'"�"#"���'��#������ �

��#�*��������B��) ���33������#�"�5��#�������#

�� ������ ���� �3��� �)�#�'����@��)A���'���#��

������"��#"���*�#�������&#�#"����������������

���$�,6����;��#���#��'��������� ����#�*����#�����#�

�������'"�"#"���'��#��#���#�*������ �������B1�#�

��"����������������"��#"���

Page 114: Cnc - Jdedwards Xe

Understanding Data Sources

5–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

������0����5������

7���5��� �!"#$+$%

3��"���*+��#�����"�������������;��#���#�����

�������#��� ��"���*+��#�������#�����;��#���

�����#������� �����"��������������*+��#

���'"���#"���9��������#�*���������#��'"���#��

����#�����"���'��#�����#������ ��"���*+��#������

�"��#�������"''���#�����"����;�"����#�#���

��&#�#"���

-���:��� ���������� ������� ������'"��������

��� ��#��#�����&#�#"���'����'���������"��

"�#���#"�������"�������������"������ ���;�"�

����#������#����'" �� ��� ��#����������#�*���#�

����������'��������'���������"���

��������������#�#�� �$���������������������'�

����"�'���#"���

=���0����������

7����� �!"#$$+%

%�����"�'���#"����*��#�*�#���+�*� ������������

����

=��� ������7����

�!"#$$$%

%�������:#����*��'��*�#���+�*� ������������

����

����8���������0���5�

��5� �!"�8��/%

�#�����������������#�������������#���#�����#��

����������#������������#��#������* "���#�* ����#

�����#�"�#�* ��"��"#������9�����#�������

����8��������

4�����5�0���5�

����������

�!"�840 %

�#�����������������#�������������*�"*�����"� ��

����������������������� "��"����#��#������ �

����&������"����*�"*���������#���#����"����#��

��������� "��"������������#��#������* "���#�* �

��#������#�"�#�* ��"��"#������9�����#�������

Versions Data Source

��"���#���������������#��#�����#����������"��?�"���5�2�! ��)#�#��

��"�����������"�����#"���"�'���#"����)#�"�� ����#���'� ��"���#�* �<

� ?�"���3"#�@-=� �8/A

� 2���"�����#"�����:#�@-=� �>A

Page 115: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

5–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

AS/400 Data Sources

$��"#"��� ���#�����������;�"���'������"#�����:"#��������'"���#"��

������������$�,6�����#��"�������E�����#�"���#"'��#������#��������

���1�#���� �#��@�1�A�*������#�������#�"������� ��#�* ���"#��*"���� ���

�*+��#�@B3�BA��B3�B��������*������� ��'�����"#��������'������

�����������������#�*��#�� �#���"�#����'����"��# ������* ��*������#�*��

�#���#��������� ��

������#���������#����'"�"#"���'���1����#���������#������#���$�,6��

B3�B���#��������'"� ������&��������'� ��"������#�����#������<

� ��#���5��1�����"���#�������#���#���'� ��"������#�� �#���#�* �<

� ����� ������"#��#�* ��@-=������A�'��"���������"#�

� ��#��%�� "��#"����������3���@-=��%3�7A

� ��#��%�� "��#"���2���"����������1�#"'"��#"��� ���@-=��%2�1A

� ?�"���5��1�����"���#�������#����*����#��������#���?�"���3"#

#�* ��@-=� �8/A�

� B�"�����#��5��1�����"���#���������������#��#������"�����#�

����#���#�����&' ���$�#"�"#������"'"��#"���#�* ��@-=��//A�

Page 116: Cnc - Jdedwards Xe

5–13OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Planning OneWorld Data Sources

B����������� ����#����������#���*�" �"���* ��&��'���������� �

���'"���#"���������"���#"'"��#"����'�� ��;�"�������� ����#�������"

�"#"�� �#�����"���������#����'"���#"���#������#�����*�"��������

����'� ��"�����#�������#�����;�"��+�#�������#���������'"�"#"���'������

� ���<

� �*+��#�3"*�"��

� ��#��

� %�� "��#���3��� ���#��@�:���#�'��#�������'���������"����"����"��

���������������#��9"���'#�$������#�*���'��#����#�������'����

���������������"#"��� ��� "��#�����#�A

� ��#���"�#"����

� 3���

�#�����#�������#�����"��#��;�"������#����'"����� #"� ����#�������'�

�����#����#������#�����*�"����;�"����#<

� B�"�����#��@�����#"����#�#���%2�����������������#�A

� �"#"*�#�������"���@������� ��"�����A

� �����9���@������� ��"�����A

� ���#� ��*+��#�@���������#������A

� ���#� ���* �

���� ���'������� ����#�����������#���'� ��"��<

/� ��� ��#��#��� ���#"����'������#�����#��

�� )���#"'��� �#�����#��"������"���������'"���#"���#��#��" ���#� ��"�<

� ��#���������"#"*�#�������"�����#�������'���������#��"�

��"�����

� ��#�������������9�����#�������'��������"#"*�#�������"��

��#������

� ��� ��#�����������������'������ ���*+��#������;�"��#������#

����*�"������"�����#�������������#"�����"#"�������

���� �����#��E��������#���#�����������#� ��*+��#���#�������'������

������'��*+��#�

Page 117: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

5–14 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

6� ��� ��#��#�����"��� ���#"����'�����*�"�����#�<

� ��#��������B�"�����#����#�������'���������#�*������� "*��

#��#����#�"��B�"�����#��#�* ��#��#������ ����� "��#"�����

� ��#���������#� ���* ����#�������'�������#"�����������'�

#�#"��

� ��#������%�� "��#���3��� ���#����#�������'���#� ��#������#�* ��

�#���*�"������""����" ��;�"������#���� "��#����#��#��#��

��� ���&#�#"�����#�*���

Page 118: Cnc - Jdedwards Xe

5–15OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Working with Data Sources

������#�*�����#����������� ��"�� ���#���������� "��#"��� �#����������

���"'������#�*�����#��������� ��"����#������������#"�� ���$'#�����������

������#�������������#�����#��#���%� ���,��#��������9���#�* ��@-��=6�A

*���"���#���%� ���,��#��������9������ "��#"����

��"�#��"�����#�"��#���'� ��"��<

� ��#����������"���������#"��

� $��"��������"'�"�������#������

� 9��"'�"���#���%� ���,��#��������9���#�* �

� 2���"�����#"��<���#�*�����#������������3��"�� ���#�������

@2=�>//8A

Data Source Naming Conventions

���������������#��������*�����#���*����#���'� ��"������"��

������#"��<

� 3"�"#���#�� �������#�

� ������"#"��

� ��������"#"��

����"'"���:���#"���'��#���� "��#�$������#������������'� ��<

Data Source Name:

� 3"�"#���#�� �������#�

� 9�#�*��"���"#������ ���*�#"�������#�

� E��������#����#���'� ��"��������#�<�R�S�T�U�@�A�M�K�O�V�W�N

����E�����#�#����#�����#������������*�'��������������#���� "��#�$���

��B���"���#�������$�,6�����#��

Page 119: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

5–16 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Data Source Description:

� 3"�"#���#����������#�

Adding or Modifying a Data Source

��"�#�&��:� �"������#����������#�*����� ��"����#�������#������#�������

9�#��#�* ��@-=�>//A�"��#����#�����#����������#�����"'������:"#"�����#�

������E������#�"���� "��#"���#�����"'����#����������#���������'"�"#"��

�'#��"�"#"� ������ ��"�#� �#"���

$���#��'�#������������"'����������������� ����#�������"'��#�* �����

��#�������"G"����������"���"�'���#"���

�����������������������������

���#�����#���$��"�"#�#"������ ������@74=�//A����������#�*��

��#��������@2=�>//8A�#�����������"'������#�*�����#���������

������3��"�� ���#��������#�����������"'���� ��"����#�������

����9���"���������(��� ��#�'����������)#��"� ���#������#������

#��#������#�����9���#��������'"� ������&������#�����#�������

%��""���'���

���#���9���"���������(��� ��#�'����������#�����#��������������#�#�

��&��"#�������� "�&��� ��#��E���� ��#"������ ��*��#�������"���#��#

���#�"��#�����#��������������#�#���"������&#�#"������#����#��

Page 120: Cnc - Jdedwards Xe

Working with Data Sources

5–17OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��#�������'��#��"�����"�����������#��"���������"#��������

������#�������

)'��������#�#����������#��������� "�&�$������#�����&��"#����#�

������'����������#��������%��""���'���������

)'��������#�#�����"'������:"#"�����#��������� "�&�-"������#�����&��"#�

��#��������'���#���"� ����� "#��'���#��������3���#��#�����#������

�������#�#�����"'������� "�&��� ��#��������#��������%��""���'��

�������"#��"�'���#"���'��#�����#�������

Page 121: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

5–18 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

0�������)'��������#�#���� ���"���������#��������"#���#����"����

�����"����������&����������:"#�'���#�����#��������%��""���'���*�

� "�&"�������� �"�#�����'�� "�&"����C������������ "�&��C������ ������

�����������������������������#�����������������:"#"�����B���"������

��#���&�����# ���E����" ������#�����"'��#�����"���#�����B����#�������

$��"�"#�#����� �#�����"* ��'���#������#� �2��� �

���#�����#��������%��""���'�������� �#�������"'��#���'� ��"��

'"� �������#����� "�&��C<

� ��#��������1���

� ��#������������

� �*+��#������)�

� 3"*���1���

� 3"*���3"#�1���

� �33�1���

-���� "#��'��33��������'��#��#����� "����� �������&������� �����&�������

� ��#�*���1���

� �����1���

� 2 �#'��

)'�����������#"����� ��"����#��������*�����#����#��#�����#�*��

1������*+��#������)����33�1�����������#�������������'"� �������

'"� �����"���"�'���#"����*��#�#������"�#�������������������

�;�"���'������"����� ��"������#���������"�#���#"������ "��#"���

�����������'�#���'� ��"�����#"��<

� .����* ������

� .���� "�����#�

� .�����"�� ���"'#

� �����#�-��.���#�

� ��9���#�������

� $�,6���B �*���#�������

$'#������� "�&��C��#�����B����#��������$��"�"#�#����� �#�#��#

� �������#����#�������������B���"����������#���#"�� ���$����

����#����B���"���#���' ��#�#�����#�����������+�#�����������������

����� ���������

��#������� ������#������������

Page 122: Cnc - Jdedwards Xe

Working with Data Sources

5–19OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� ���������

��#��������.� )��"��#������#�����#�������"����'"�����������@�?%A

#�����.B�J�����B�"���-���#"����������#�*���@�BA

#�������#�* ����#��

��#������������ ����#�����'���#�*���

�*+��#������)� ������#�*���#�* ����'":��������

3"*���1��� ��������#���������'�#��� "*�"��#��#����#�"������

������'" �������������������'" ����� ���:"#�"���� �

���� "*���"��#������"�����#��#���#����#���X��-J� "*��

@��� ����-�$�$A��E������������������#���� #"� �

X��9J���X��$J� "*�"��

��9 �������-" ��@'���:��� ����%�$9�"#�����

��#���"�#"����A

��� ��#����:���#�* �������

��� ��#�������� "*��

��$ ��#��'" ��@'���:��� ���-�6//�����-�=//A

��- �������������#���@'���:��� �����-�$�$A

CB7 �� ������'" �

�B� �����:���#�* ��������@'���:��� �����-�B�A

��� ����"#��'" ��@'���:��� ���-��=���-��=6A

�%� ��������������@'���:��� �����-�%�A

3"*���3"#�1��� ������������"�#����"#�������"'"�� "#��'� "*�"������

�=�)1)�$�"�"#"� ����������#���� "*��� "#������#�

���#� ����"�����#�#��#����������"������#�������

���'"���#"����'� "*��� "#������"�#�"����"��#���3"*��

3"#�9�#��#�* ��@-��=6A�

-������� ���#�"�'"� �������#����� "�����"�����#

#��#�����*������#���������� ����������"�����#

���������*�#������#�������@�*+��#A���������#������

@��#�A���������#�#���#���������������� "����&� ���

�"#�"������� ��

Page 123: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

5–20 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� ���������

�33�1��� ����"'"��#���������'�#�����#�*����"���'" �����"�'" ��"

���"'"���"��#���T�B��E���9�����)17�U���#"����'�#��

��#��"������+���"�"�'" �������'" ���������"'��������

�����#���� �#'�������#�����#�*����?� ���'�����"'"�

����"���������#�*�����<

$�,6���#���B�,6���O��B�%

$�,6���#�������#��������B9��O���B1��

42=����#���B�,6���O� "*+�*��#�

42=����#��9"���'#��H3������O� "*+�*��#�

42=����#����� ��@?�"������A�.1)F�O� "*�����

%�>����#���B�,6���O� "*+�*��#��

%�>����#��9"���'#��H3������O� "*+�*��#��

%�>����#����� ��@?�"������A�.1)F�O� "*������

)�#� �#��$�,6���O�+�*��*���

)�#� �#����� ��@?�"������A�1��O�+�*��"����

)�#� �#���H3������1��O�+�*��*���

�"�"#� �$ ����#��$�,6���O�+�*��#��

�"�"#� �$ ����#����� ��@?�"������A�1��O�+�*��"����

�"�"#� �$ ����#���H3������1��O�+�*��*���

��#�*���1��� ����������"�����#��#�����#�*�����"���"�#� �#"���

������42��?�%$2���42=����

�����1��� ����������'�#�����#��&������������#���"����

������*+��#�����*���:���#���

2 �#'�� ����#�����'����"�� ��������#�����#�*����"������

.����* ������ ��"���#"��#������'�#��������)��'"� ��

.���� "�����#� ����&�#�"�#��#�����#��"������ "���'���#���#���"��

��#�����#��������'"����"��#���9"���'#��"����

���#� �2��� ������� ����#���#"�� ��#���#�"�' ����--

'�����5����� ��#�* ��

.�����"�� ���"'# ����&�#�"�#����#���#"�� ���"'#����"�� �������#"��"��

������#"�����#��*����������"'"��#"���"��#�����#�

�"�#"��������"�'"� ��"�'������� ��#�* ���� ��

1��5����� ��#�* ����� ��*��"��������#����#������

�"#�����"�� ��"'#�#������--��)'�����*"���"��������� �

#�* �������5����� ��#�* �������� ���" ���#

�����"G�#���'"� ��"��#�"�#�* ��#��#������*�������"��

�"'#������"�"���#�����&���"����* �������"���

�����#�-��.���#� .��#�"�' ���#��#����1����--���5 ��� ������ ��&"��

'��#�����#��������E������ �������#�"�' ���#������1

#���� �������#���#�*���"�#��"#��"�������B$��

�"�� ��������#�"�' ���#����#��"������#�������#�#�

�����5 ��� ������ ��&"���

Page 124: Cnc - Jdedwards Xe

Working with Data Sources

5–21OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� ���������

��9���#������� .��#�"�' ���#�����"'�����#���#�����#��������"

���#�"�������9�#�* ��@-=�>/�/A��)'��������* ��#�"�' ���

����� ���"� �����/�"��#�����9���#��������'"� ����

#����&��"#����#��������'����E������ ���� ���#�#�"

' ���'��#����#�����#�������������������������#�

���������#�"��������� ����#����* ��#�"��##"���'�����

��#�*�����#��������� �����#�������#��#������#

�#���������������#�������

$�,6���B �*���#������� �����##"���'��#���$�6���B"�����*+��#�@B3�BA

��#������"��"��#�����#�������#�������������#�"�

����� ��B3�B���* ��

����������������������������������������:��5�����6������

����������

���#�����#���$��"�"#�#"������ ������@74=�//A����������#�*��

��#����������3��"�� ���#��������@2=�>//8A�

���#���9���"���������(��� ��#�'����'"���#�����#��������������#�#�

��&��"#�������� "�&��� ��#�

���#�����&��"#����#��������'������������#�*���2����'���#��

%���������������&��"#����* ��������#���������"G"���'���������

����E�������� �������#�"���� "��#"���'���#����*+��#����'"���#"��

9��������� "��#"���

Page 125: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

5–22 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�������#�* ��������#�������"G"���"�'���#"����� "�&�$������#�����&

�"#����* ��������#���������"G"���'��������%��"����* ��������#�

�������"G"���'�������������#�"�'�������������"��������#�* �����

"���:�"�'���#"���'������#���������#�* ��

������"'���:"#"���#�* ��������#�������"G"���"�'���#"�������#�����&

�"#����* ��������#���������"G"���'����'"�������� ��#�#�����"�����#�

����������%��"����* ��������#���������"G"���'����������"#�

���"�� ����#����"�'���#"���

����$ #���#"�� ������������"� ���#���%��"����* ��������#�������

�"G"���'���*������"�����'�� #���#�*���'���#�����&��"#����#�

������'��J�%������������������������#�����-$.3���� ���"

��#���#"�� ����#�����#�#����*+��#�1����'"� ����#��#���'�� #��� �����

����'��#���'����)'������������#����*+��#������'�����-$.3���#��

'"� ��#��#�����'��� ��'" ����"#����'�� #��� ������#���'���������

)'�����������"������������#���#���#�������"'�"����:"#"�������

���� �#��#���'� ��"���'"� �<

� ��#�������

� �*+��#�1���

����E���������'"��������#��'��� ��*+��#�"������#�������*�

��#�"�����-$.3���#�#����*+��#�1����'"� ��

���#���%��"����* ��������#���������"G"���'�������� �#�������"'��#��

'� ��"���'"� �<

� )�"#"� ��#����

� 1�:#��#����

Page 126: Cnc - Jdedwards Xe

Working with Data Sources

5–23OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� 2����#�)�������#����

� 9"�"�����:#��#

� 9�:"�����:#��#

������� �������� "��'��*�#��#���#�* ��"�'���#"�������#���"���:

"�'���#"���

����)'�#����*+��#������"���-$.3���#����� ��'"� ������������#���

���"'�����#���%��"����* ��������#���������"G"���'��������* �������

1��������)���:�������1����

�����#�����"���"�'���#"�������������"���'���#���%��"����* �

������#���������"G"���'��J�-�����������"���#"���"�� �����" �* �

'���#�����&��"#����* ��������#���������"G"���'��J�%������������

%��"����* ��������#�����������"���'���������

���#���%��"����* ��������#�����������"���'�������� �#�������"'�

#���'� ��"���'"� �<

� �������#��@E,1A

� ���#����* ��@/,�A

� "�&��C�#���#���#��#������"���'����)'���������� "�&��C�����

�*�;���#�'�����#" ������#���#��#�����#���$��"�"#�#"������

�����

Database Middleware Drivers

����'� ��"���#�* �� "#�#�����#�*����"�� ������"������ "����"#�

����� �����������"�������#��������������#����"��������"�#��'�����

Page 127: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

5–24 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� �#'����-������"�'���#"����*��#�����#�����������"'������#����������

���������������������&��������

?4�!+++����6��� 42=����#���B�,6���O� "*+�*��#�

42=����#��9"���'#��H3������O� "*+�*��#�

42=����#����� ��@?�"������A�.1)F�O� "*�����

8��#+++����6��� %�>����#���B�,6���O� "*+�*��#��

%�>����#��9"���'#��H3������O� "*+�*��#��

%�>����#����� ��@?�"������A�.1)F�O� "*������

&���� �����6��� )�#� �#��$�,6���O�+�*��*���

)�#� �#����� ��@?�"������A�1��O�+�*��"����

)�#� �#���H3������1��O�+�*��*���

��5����1���� �����6��� �"�"#� �$ ����#��$�,6���O�+�*��#��

�"�"#� �$ ����#����� ��@?�"������A�1��O�+�*��"����

�"�"#� �$ ����#���H3������1��O�+�*��*���

1�(<++����6��� $�,6���#���B�,6���O��B�%

$�,6���#�������#��������B9��O���B1��

���������������6��� ������ �"�#���B�,6���O� "*+�*��#��

������ �"�#��9"���'#��H3������O� "*+�*��#��

������ �"�#����� ��@?�"�����:A�.1)F�O "*������

Processing Options: Database Data Sources and Logical DataSources (P986115)

Defaults Tab

���������"�����#"������* ������#�����#���'� ��"��<

� ����"'���� ��� �@��#�*��A���#�����������������#������

Page 128: Cnc - Jdedwards Xe

Working with Data Sources

5–25OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� )��"��#�����#����������#�#�����#�������B����#������������#��

��&#�#"���)�#� �#"�����������

1. Data Source Type

)��"��#������#�����#�������"����'"�����������@�?%A�#�����.B�J����

B�"���-���#"����������#�*���@�BA�#�������#�* ����#��

2. ODBC Data Sources

.��#�"�����"�����#"���#�����"'�����#���#�����#�������B����#������

��"���#�����&#�#"���"�#� �#"���������?� "���� �����<

� B ��&<������#����#����B����#�������

� /<����#��� "��#�$������H3�����������B,����#�������

Modifying the Release/Data Source Map Table

���������������������#�����������������#������#��#���%� ���,��#�������

9���#�* ��@-��=6�A����"�#�* �����#�"����#"��'��#�����#���"�#"�������*+��#

3"*�"����������"��� "#���������"G��#�����#"�������"���#��� �����-�

�:��� ���������� �����������#����#���"�#"�������#"��'��� ����B! �/�

B! ��������B! � �

����������������#��'���*+��#�*�#�������#������������� ������&�#��

� �����'��������#�����������#������#��"������#���#����������#������

����#���#���#���#��������"���"�������#"* ��� ���������� ��������#

� �������#���������������*+��#�*�#�������#��������"#��"������#"* �

� ����

������"'��#���%� ���,��#��������9���#�* ������� �#��#���'� ��"���#�&<

� ?"����������"��#���%� ���,��#��������9���#�* �

� $����������#��#���%� ���,��#��������9���#�* �

� �� �#���������'���#���%� ���,��#��������9���#�* �

���6�������������������8������(�����������7������

-���#������"�����#������@74=�8 A��������%� ���,��#��������9��

@2��=6�A�

������&��"#��%� ���,��#��������9���'�������������#�"�'�������

�����"����� "#��'���#�����������"G���*����#�������#����@��#�

�"�#"�������*+��#� "*�"������"��� "#A������ ����@'���:��� ���B! � A�

Page 129: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

5–26 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

E�������� ������������ �#����#��������$ #���������������"����

�����'������:"#"�����#�����������������#����"'��#��������

� "�&�-"���#���"���#������#��#��'�#���%� ���,��#��������9���#�* �

@-��=6�A�

����%� ���,��#��������9������ "��#"�������"G����#�������"�#���

#���#��#���'"#�*��#��������#����*��� ����

�����#��������"�#��������'�#���#���#��#����������* �5� "�&��

�����#���"���#���"�'���#"���'��#��#������

���������������������8������(�����������7������

���#������"�����#������@74=�8 A��������%� ���,��#��������9��

@2��=6�A�

������&��"#��%� ���,��#��������9���'�������������#�"�'������

�����"����� "#��'���#�����������"G���*����#�������#����@��#�

�"�#"�������*+��#� "*�"������"��� "#A������ ����@'���:��� ���B! � A�

E�������� ������������ �#����#��������$ #���������������"����

�����'������:"#"�����#�����������������#����"'��#��������

� "�&�$���

����%� ���,��#��������9���%��""���'�������������#�"�'������

��'"���#�����#�����������#���� ����

��#��#���'� ��"���"�'���#"�������� "�&��C<

Page 130: Cnc - Jdedwards Xe

Working with Data Sources

5–27OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ��#������������

� %� ���,��#�������

��#��#���������'�#�����#����������������#���"�#"�����5�B! >

� %� ���

� "�&������ �#���#���#��#�����&��"#��%� ���,��#��������9���'���

�����������������������#�������"��#���#���#��#��������&��"#�

%� ���,��#��������9�����#" ������ "�&�-"���

������������������������8������(�����������7������

-���#������"�����#������@74=�8 A��������%� ���,��#��������9��

@2��=6�A�

������&��"#��%� ���,��#��������9���'�������������#�"�'������

�����"����� "#��'���#�����������"G���*����#�������#����@��#�

�"�#"�������*+��#� "*�"������"��� "#A������ ����@'���:��� ���B! � A�

E�������� ������������ �#����#��������$ #���������������"����

�����'������:"#"�����#�����������������#����"'��#��������

� "�&�-"���#���"���#������#��#��'�#���%� ������#��������9���#�* �

@-��=6�A�

����%� ���,��#��������9������ "��#"�������"G����#�������"�#���

#���#��#���*��#����#����*��� ����

�� ��#�#���������������#�#��������'���#���#�* �������#����� "�&

�� �#��

������'"���� �#���� "�&��C�

Page 131: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

5–28 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Page 132: Cnc - Jdedwards Xe

5–29OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Running Data Source Reports

������#��������9�#��*�#������������* ������#�����#�������#�'������#�

��������������"������#�'��#�����#��������

������#��������9�#��*�#�������������� ���'��������#��"��

@%=�>//BA���������#�������� �����#������#��;�"�������#��"���

E������#���%=�>//B����#��"���#���#�����"�����#"���'����������#��$��

��#��� ��#"���'�������#���#�*����#����'��#������"'"�����#����#�'���#��

�"�������������'"�"����#�"�������"�����#"���������#��� ��#"����"'�����

�������#������#�'���#����"���

��"�����#�����#�"��#���'� ��"��<

� ��##"�������"�����#"���'����#����������#

� 2���"�����#"��<���#��������9�#��@%=�>//A�������#��������9�#�

�����"���@%=�>//�A

� %���"���#�����#��������9�#�������"���%���#

� %���"���#�����#��������9�#��%���#

Setting Processing Options for Data Source Reports

����'� ��"���#�&����"*������#���#�����"�����#"���'������#������

���#�#������#������#��"���

����5���������5���������������������������

-���#���$������������#"��������@74=�/�A����������#�������

9�#��%���#�����#��������9�#�������"����������&��"#��B�#��

?�"���5�$��" �* ��?�"���'����������@��������'��������

���� ���'���"������#�����������A

�� ��#������'�#������#�@"#�����J#���##����"������A�����#���������

2���"�����#"���'���#���%�������������2���"�����#"���'��

������

Page 133: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

5–30 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���#���'��J�.B���"���#�*����#��"�'���#"���'��#������#��"����-�

����"�'���#"����*��#���#�"���#���'"� �����#�"�#�*���������������������,�&�������������/.012336����&����������������������/.0123356

� "�&�#���#�*�'��#������#����������"�����#"����������#�#����#��

-������"�'���#"����*��#���#�"���#���'"� �����#����#�*����

�����������������,�&�������������/.012336����&����������������������/.0123356�

� "�&��C�#�����������:"#�#��#�����&��"#��B�#���?�"���5�$��" �* �

?�"���'���

Processing Options: Data Source Master (R98611) and DataSource Master Comparison (R986112)

��������"�����#"���#��#�����#�'���#������#��"������* ������#����#�

�����#��'��#�����#��������9�#��%���#�@%=�>//A�����#�����#�������

9�#�������"���%���#�@%=�>//�A��

��������"�����#"���'��#������#�����������"�����#�*������ �#���

B������#���F������/���"����'�#������#�����"'���#��� ��#"���"��������"#

��#�*����������#���F������/���"����'�#������#�

UBE Driver Tab

��"�����"�����#"��� �#��������"'��#�����#��������9�#�����#��������#

#������?�"'��#��#�#����"� ��������#����*����������#��#������#�#��#

�������#�#������E�������� �����"'��#�����"����������#�#�����'��#��#

���#�

1. Data Source Master Report Name

.��#�"�����"�����#"���#�����"'��#���������'�#������#��������#�#�����

?� "���� �����<

%=�>//���#��������9�#��%���#

%=�>//����#��������9�#��������

2. Version

.��#�"�����"�����#"���#�����"'��#�����"���#��#��������#�#�����'��#��

���#�

R986112 Tab

��"�����"�����#"��� �#��������"'��#���#�����#�������#�����"��#��

�����"����#��������"�����#�������������#������ ���:���#"����"�#"���

Page 134: Cnc - Jdedwards Xe

Running Data Source Reports

5–31OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1. Data Source One and 2. Comparison Data Source Two

.��#�"�����"�����#"���#�����"'��#���������'�#�����#�������#��#����

���#�#���������

3. Comparison Method

.��#�"�����"�����#"���#�����"'��#��������"�����#������������

�����"�����#������#��"������������ ��������#�����#������������

�����������"�������"��#"��������� �� "#�������� ��"����#�������/�#��#

�����#�"����#��������������������������"��*�#���"��#"��������� �� "#

�����#��#����"����#�������/�*�#���#�"����#����������$1�������"����#�

�������#��#������#�"����#�������/�

?� "���� �����<

/ ������������"��#"����� ���2"�#��� ��#��������'�����"��#���'"#���#�

������*�#���#�"��#�����������#�������

B ��& �������*�#���"��#"����2"�#������"��#���'"#���#������������ ��#��

�����"��#�����������#�������#��#����J#��:"#�"��#���'"#���#�������

4. Exceptions Only

.��#�"�����"�����#"���#�����"'�����#���#���"�#��� ��#������#��:���#"��

��#���"�#�� ���������#��������"������#��?� "���� �����<

/ 2"�#��� ��#��������#��#�����"''���#�*�#�����#���'"#�������������#�

�����

B ��& 2"�#�� ������'���*�#����#�������

R98611 Tab

��"�����"�����#"��� �#��������"'��#�����#�������#�����'��#������#�

1. Data Source Name

.��#�"�����"�����#"���#�����"'��#�����#�������#��#��������#�#�����#�

�������#������#�

Page 135: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

5–32 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Running the Data Source Master Comparison Report

%���#�����#��������9�#�������"���@%=�>//�A����#�#�����������#�

������9�#��@-=�>//A�#�* ��*�#�����#�����#��������-���:��� ������

�"��#��������#���-=�>//�#�* ��"��#����#�����#�������#��#���-=�>//�#�* �

'�����"��������������#����������#���������� ��� ����*����'"���

�"''���# ��������������"���

Before You Begin

� .��#������#��"���#����#������"�����#"���'��#������#��-�

"�'���#"����*��#���#�"�������"�����#"����������������������� ����������&��������.���������������������������,�&������������/.012336����&�����������������������/.0123356�

����'� ��"���#�&����"*������#���#������#��� ��#"���'��#������#��������

#�����#������#�

������������������������������������7�����0��������

-���#�����#���$��"�"#�#"������ ������@74=�//A��������B�#��

?�"���@2=� �8A�

��#��%=�>//���#�#���B�#���$�� "��#"���'"� �������#����� "�&�-"���

���* �5� "�&���"���F������/������?�"���2���#"���'���������

���?�"���2���#"��������&�#�����#���� ��#"�����#"�������#����� "�&

��*�"#�

Page 136: Cnc - Jdedwards Xe

Running Data Source Reports

5–33OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���#�����#���� ��#"���'����������'���#��������"�#���� ����#�

���"'��#����:��#�������������#�#���������

� "�&��C�

������������������7�����0��������

-���#���$������������#"��������@74=�/�A����������#�������

9�#�������"���@%=�>//BA������$��" �* ��?�"���'���������

���#���$��" �* ��?�"���'����������#�����"����������"���#��#��

���#��������#�#�����

� "�&��� ��#������?�"���2���#"���'���������

Page 137: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

5–34 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� "�&���*�"#�#�����#������#�

Running the Data Source Master Report

%���#�����#��������9�#��%���#�@%=�>//A�#���"�#������#��'�#�����#�������

9�#��#�* ��@-=�>//A�'�������"'"����#�������

����'� ��"���#�&����"*������#���#������#��� ��#"���'��#������#��������

#�����#������#�

���������������������������������������7�����8���

-���#�����#���$��"�"#�#"������ ������@74=�//A��������B�#��

?�"���@2=� �8A�

��#��%=�>//��#�#���B�#���$�� "��#"���'"� �������#����� "�&�-"���

�� ��#���"���F������/������#������������#���� ��#"���'���#���%��

�����

����2���"�����#"���'���������

��#��#���2���"�����#"�������� "�&��C�

����%���#���#��#���#"��#"���'���������

���%���#���#��#���#"��#"������������������������2"�#������� "�&

�C�

Page 138: Cnc - Jdedwards Xe

Running Data Source Reports

5–35OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���#�����#���� ��#"���'����������'���#��������"�#���� ����#�

���"'���:��#������

� "�&��C�

���������������������7�����8���

-���#���$������������#"��������@74=�/�A����������#�������

9�#��%���#�@%=�>//BA������$��" �* ��?�"���'���������

���#���$��" �* ��?�"���'����� ��#�#�����"����������"���#��#��

���#��������#�#�����

� "�&��� ��#������?�"���2���#"���'���������

� "�&���*�"#�#�����#������#�

Page 139: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

5–36 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Page 140: Cnc - Jdedwards Xe

6–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Middleware

)����� "��#,�������"�����#����� "��#"�����#�������"��#�������"''���#

� �#'���������� �#'�������������"''���#�������"��#"�����#��� �

��#�*������������#��#�������������������#"����#����)������'�

� "��#�#��������"��#���"#��������������#��������"��#���"#���#��

�����#������#�*����������"��#��#�����*"������ #"��#��� ����

�� #"������"������"�������"��"��� �����'��'#������ ����"�� �����

��"����"���*�#�����#�������#"����#�������#���*�"������ "��#"����)#�"

"���#��#�#������������� "��#"������"#��#���#��#�"�*���������"�� ������"#��#

�"�� �����#�#����

��������������"���#���'� ��"���#�����'��"�� ����<

=�� ��0�����������

7���������

2�'���#���������#"���'���� "��#�#�������������

#���������������������'���"#"*�#����;��#��)#�"

�����5#�5����������5*�������&�#5*������� #"����

������"��#"����"�� ������ �#"����

=��;�����������

7���������

2��"���� �#'��5"���������#���� "��#"��������

"�#�'����@$2)A�'���� #"��#�*��������������$2)���

����"��#������<

� B������� ����� "��#"���#��#������"�� �������#�

� �#'��5���"'"���#��#����H����3��������@�H3A�

������"������#�����#��������;��#�

� $������$2)�'���"#"������������*�"���'���#"��

"��#�����������"��� �������������� �����#���

$2)�#�������"�� �������#��� �#'��5���"'"���H3

#�#����#�

���B���� �����"���� "��#5#�5�����������5#�5���

��#�*������������������ "��#�"������� ��"

"�#���#����"#������"�#���'�#�"�5��#����#�*����"���

������#���)B9�� "��#�$���,6�����#�*����'#��������

#���9"���'#��������#�*���������#"�"#��@��B�A

������"���"�#�'����

��"���#"������"*��#���'� ��"��<

� .���#���"������1�#�������"��#"����"�� ����

� .���#���"������B�����#�*����"�� ����

Page 141: Cnc - Jdedwards Xe

6–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding JDENet Communication Middleware

���������"��#���"#��������#�����������#��&��#���#��������#����#

������������"��#"�����#��� �@���#��'���#��� A��$�������"��#"��

��#��� �"���'��� ��#��'�� ��#��#����"'"��#���'���#������ �#"���"��'�

�:�����"�����#���������"''���#����"��������'� ��"������#�����#��� � ���

�"#����"���#���������"��#"����"�� �����"���������<

����3������

�������������

������#��&� �������� ������"���������#"��

"�'���#"�����������&"���������#���""����;��#��

����#����#� �������"���������#"��5�"��#��

��#�5�� "������"���������#��&����"� �������"��

���5#�5������#���:�������"����"����#�����"�#�"���

�"�����������#"����"#��������#���'��#���� "�* ��

�;��������:��������'���#��

���������������#�#�����2,)2���#��� ��"#��

1������������� ������� "��#"��� �������"������ "��#"��5#�5��� "��#"��

"�#���#"���������#���:�����������1�#�"�#������ "��#"��

����������"��#"����"�� ������

JDENet Communication Middleware

���1�#�"�#�����������������"�#���������"��#"����"�� ��������&����#��#

���"���'�����5#�5��������� "��#5#�5����������"��#"����-��#��

"�� ���<

� ���&�#5*����������"��#"��

� 9����5*����������"��#"��

� ����� ������5*������"��

� ����� �����"��#��������

���1�#�"������5#�5�����"�� ������ �#"������"�&��'���� "��#�������#��&

������#"���"�"#"�#������������������#��&�������#"�����������$�� "��#

� ����"�"#"�#��#���������#"���*���&"���'�����#�"���'������#�������"���

$�����"�����#��������������"#�������#������#��&��;��#������������

Page 142: Cnc - Jdedwards Xe

Understanding JDENet Communication Middleware

6–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

"#��"������#�"����&���'��*��#���� "��#��)��#�"����5#�5�����"�� ����

� �#"����#����"#"��#"���*�#������ "��#���������"���#��"����*����"��

����"���#�#�#���������#"����$�������"�������"����������� �#'����������#

����� "��#����������#����"����#"���

�"#�����1�#��������"��#"���*�#������ "��#��������������#�����

����������1�#����������#�"���;��#�'������"����������;��#�'�

*�"���'���#"����*�#���+�*����#���� "��#"����������� ��"��������"#��

���1�#������������"�"��#��'���#���� "��#���#�����������1�#����� �

��#�*����;��#��� ��"'��� #"� ���������"���������"'�#��������"''���#

����#����

$�� "��#"����;��#�@�����A�����*������������������������$

������������������������ "�����*�"���'���#"�����;�"��#���� "��#�#�

��"#�'��#�������#������ �#��#����;��#��$�������������;��#���������

*�#������������* ��#���� "��#�#�����#"�����"#�����#���#�&���" ������� �

������#����;��#��)�������"���#������*�"���'���#"�������� ��*�

�� ������������ ��

Socket-Based Communication

$���&�#�"���������"��#"���������"�#�#��������"��������� "��#"��������

���"������&�#��'���#����������#��&�����&�#����"�������� �:

������"��#"��������� �*�#����������������#�������1�#����#���

��&�#�#�����"������5#�5����������"��#"�������&�#������#���#��#�#�����#�

�"���"�#��#�

Message-Based Communication

9����5*����������"��#"��������#��#���� "��#"���������"����;��#�'�

��"������#��"��#���'����'�������#��#�������"��������#����"����;�����'�

����"���������"�� ��������� ��������#���""������"������* ��#��

� "��#���� "��#"���#��������#���#�&���"#���#�����"�����"���#������ �

#����+�*��#������ "��#"�����#���"#���#" �#����;��#�"����� �������#����� #

�#�����

9���"���"���#������"�#��'����� "��#"���#��#��������#��"�����)#�"�#��

����"#���'����#������������ �@%2�A����"�������������������������

���&��"�������������&"����'����1�#������#��#�#���������#���""���"

���� �#��

OneWorld Process-Based Design

$ #����������� ��� "��#���&#�#"����������������#��������������'

����� �� ��������� ����������� ���"����5�:���#�* ����� "��#"�������*�

���"����#���������#"��������� ��������"�#��� ���#��&������@� �

�'����#��������#�����A��� ������1�#�#��������"��#�����;��#�#��#��

����� ������

Page 143: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

6–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

������ �����������#�������� ������1�#����"������������"��#���"#�

#���� "��#���&#�#"���������#���;��#�������#�������"�#�����"��#��

����� ���������)��#����#������"��#�����������#����&�#��#��

�����"�#��� �#'��5���"'"�� ��"����������������33������� "*�"������

+�*�;������$���������������� #"� ������� ����"����������� #"� �

����� �����"��#������������ #"� ���33������� "*�"�������+�*�;�����

���������#�����'�#�"����"#��#���"�#��#��� #"� ����&#�#"���������&�

�;��#�#��#������������#�����#"����E����������#� �#������*���'

��&#�#"���#��#�������&��������"�#�"�����"���������#"���#������"�����

������E�������� ����'"���#���#�#� ����*���'����"��#���������@����#��

���*���'������#���A�#��#������ �����#����������"'"��#�����'

��&#�#"����;��#�

� 1�#��&������

� C��� ������

Network Processes

�����"���� �#"���"��*�#�����#�����#��&��������#������"��#���������

����#��� ��"�����������"�� �#"���"��"����"'"�� ����'"����*��#���+���"�"�'" �

���#�����#��"��������������#��"��������#�������#� ��#����

����� ����#��&��������'����#���������1��I��+�*����"�+�*����� �

��#��&�������#"�������#�''"��'������� ���

$���'"����"��#���+���"�"�'" ��'������������#��������*���� #"� �����1��I�

�������%���� ���'�#������*���'����1��I���������#���"�"#"�

���1��I�������������#���P��#�� "#����Q

)'��� #"� �����1��I��+�*�������"'"��������� ��#�#�#���+�*����;�"���

� ���#"�����+�*�#��������;��#�������#�����:"�������*���'����1��I�

������"�#�#��������� ����#���#"�� ��� #���#��*�#�����#�������# �

���"������1��I��+�*���#" �#�����:"�������*���'�������#"���"��������

��"����"������������'� ����*� ���"���*�#���������� ����#��&�������

)'��������"���������#�����:"�������*���'�������#"���'��#������1��I��+�*

"���#����� "��#������������#�"�"#"�#��������"#"��� ������ ���"������#��#

������#" �����:"#"����"���������#"���"����������"�"�*�������*����"���

� �������#"���#�����1��I����"#�'��#������#"����'�������� ���"���

-���:��� ���������#��#�#���+���"�"�'" �����#����������"'"��#��#�'��

���1��I������������ ����������'"#����1��I���;��#�"���#���#��#��

P��#�� "#����Q���"���"�#���"�"#"� ����1��I�������#��#�"�����#����

#�#5������������������;��#�#�����1��I��"����"�����#���P��#�� "#���Q

���"���#����;��#������"���"#�#�������������1��I����������"���"#�#���

#�#����"��"�����#���"#�'��#������#"����'�#����"���*�#�����#��

�;��#"������"�������#�"������������������������'��#���#�"�����

'��#�����1��I���;��#�������#���'"'#���;��#�"����"�����#��#��;��#�"

�"�����#��#���'"#����1��I������������#������ �����#"����

Page 144: Cnc - Jdedwards Xe

Understanding JDENet Communication Middleware

6–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Kernel Processes

��������"*" "#���'�#������1��I�������"�#������ ��#�����#��&� �����'

������"��#"����)'�#������1��I��+�*���#��"���#��#�#���"����"���������"��

�;��#�'�� ��"������"����"#���#��#����;��#�#����������"�#�����1��I&

+�*������� ����#��"�����������"�#�����1��I&�+�*�*������������

"���#"'"����������1��I&�+�*�"�#�������� �������#��#����"���#��� "�&

*�#�����#������1��I��+�*�����#��������"�#��� �#'��5���"'"������"���+�*�

�������1��I&������"���� "��* ���� ��#������

�������1��I&�+�*����� ��#���#��5������#"���#������'���#�����"��� ��"�

�����������#������1��I��+�*����� ��#����#����� "����#��#��������"�#�

����"������������//����"��#���&��� �#��������������"* ��'�������"'"�

#�����'������ �������

�:��� ���'� ��"��������"�� ���������"�� "�&� "*�"��@�� A�'���"�����1�

� �#'��������� "*�"��@� A�'��.1)F�� �#'�����������1�#�������'�

$�,6���� �#'���

-������"�'���#"����*��#����1�#��"�� ������������� �����"��#��������������������������

Page 145: Cnc - Jdedwards Xe

6–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding JDEBase Database Middleware

�"''���#���#�*������������#��#���@�B9�A������#��"�������"����'

�#��#����H����3��������@�H3A��-���:��� ���#���'� ��"���" �#�#�����

9"���'#��H3���������� ��������B�,6������� ��#��������H3�#�#����#<

7���������'�����6�� ��3����K�-%�9�2%����$�-�/�/

������ ��3����K�-%�9�2%����$�-�/�/N

�;@(<++ ��3����K�-%�9�2%����$,-�/�/

�����������'�����#�*����"�� ����� ����"�#�����"������������"�#�'����#�

"�#���#�#�����"�����"����'��H3��������������������#�*����"�� ����

�����#��� ������B������"���"�����������#��'���� "��#"���������"��

"�#�'����@$2)A�#��#��������������� �#���;��#���#��������'�����#�

���"�� �#"��� ��"������B���"�#���#�#�������"��$2)����������#�#����H3

"�#��#��������"�#��#�#����#�'������� ��#�������#�����#�*���

9� #"� ����#�*���"�����"#"*�#������"�����#��;�"�������"#�"���������#�

�������#�*���"�#��"#�����"����"#�"���������"��'����#������#����#"��

���"#����������B�����#�*����"�� �������������*������#����#"��

���"#��

���B������"��<

� �����*" "#��#��"�� �#������ ����'���� �#'��5���"'"���H3����"��

� %��"������ �����#��'���#"����"��

� ����5#�5����������"��#"��

� �����#"�������"��

���B������"������#��'�$2)�#��#������� �����������#��'�#�� �#"��

������#������� �������#�� �#"��������������*������"��#�����#�

�������'"�"#"���

-���:��� �������������#���;��#�'��$����9�#��"������������*+��#

���'"���#"���9������@��9A���#��"�����"�����#����������#�"��#��

�;��#���#�* ���������#��������9�#��#�* ��@-=�>//A����"���#�����#�*��

Page 146: Cnc - Jdedwards Xe

Understanding JDEBase Database Middleware

6–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

"�'���#"������"�"�� ����#����;�"����"������"���"� ������#��#�� �#��#��

�;��#�"�#��#��������"�#���H3�#�#����#�

Database Middleware Flow

����'� ��"����:��� ��" �#�#��#�����#�5�;��#�������-��#�"��:��� ���#��

�����#��������"#�"��'����2��������������� "�&�-"���

Database Middleware Flow

Data Servers

Business Data, Data Source System, Data Source

Purchase Order HeaderPurchase Order DetailOther Data Tables

Object Configuration ManagerData Source MasterOther Technical Tables

Third-PartyCommunicationSoftware

Third-PartyCommunicationSoftware

Third PartyCommunicationSoftware

OneWorld FoundationJDEBaseJDENet

Workstation

OneWorld accommodates any number of data servers. Thisillustration shows only two.

Step 3

Step 1

Step 2(SQL Statement)

/� ����� ����������#���;��#�#�����B������#�����&#�#"�������

�;��#�"�� ����#���'��J���#��#��#������������� ����������#�� ���#�

#��������

�� ���B�������#���'� ��"��<

� B�" ����#��#��#���'���#������ "��#"���#��#�������#��#��

��#�� ��H3�#�#����#����;�"�� ��#������������������"#�#��#��

#�"�5��#��������"��#"����'#�������"����"������#��

��&#�#"�����:��� ���'�#�"�5��#��������"��#"����'#������

)B9�� "��#�$���,6����9"���'#��������#�*���������#"�"#�

@��B�A������� ���H31���

� 9������#������"�� �������#"���#��#�����#�*���

� 9��������#"�� �'�#���� ��"#���

� 2�'���� �*"��"���

Page 147: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

6–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� 2����� #������*��&�#��#������ "��#"����3������"��#��� ��

'" ��@+��� ��A�

� ����#�"�5��#��������"��#"����'#�������#�����&#�#"���������#��#�

#���#�"�5��#��������"��#"����'#�������#����������������#���

������#���#�* �������#���#�����#��*��&�#��#���#�"�5��#�

������"��#"����'#����

6� -"�� ���#���#�"�5��#��������"��#"����'#����������#��*��&�#��#��

���B�������#�������� ��-�����#"���������

Page 148: Cnc - Jdedwards Xe

Understanding JDEBase Database Middleware

6–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Page 149: Cnc - Jdedwards Xe

7–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Modes of Processing

����� �����"������������'������#�����"�#���#"������ "��#"�������

��#��������� ��#�����������������������������#������'"���#"����$

��#����� �������#���"#"*�#����#������ ��"��"����������#��#���#"�"G��*�#�

#���������'�#�����&#�#"�������#�����#��"�#��"#���'�#�������

��"���#"������#�"��#���'� ��"���#��"�<

� .���#���"���#���������'�����"��

� ��&"����"#���"��#5������#�����"��

� ��&"����"#��#��5���5'���������"��

� ��&"����"#����#���������������"��

Page 150: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

7–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Page 151: Cnc - Jdedwards Xe

7–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding the Modes of Processing

����� �����'�������#"��������'��"�#���#"������ "��#"��<

� �"��#5������#�����"��

� �#��5���5'���������"��

� B�#��5�'5��������"��

� D��5� "��#�����"��

Understanding Direct-Connect Processing

�"#���"��#5������#�����"���������������������� "��#"����������������#��

#��������#��#����#�"��������+��*�"�����#��������"��#5������#�����

� �������#���"#"*�#����#������ ��"���-����'����������������"��

�"#"*�#"���������#������ ��"��"����������#��#���������#��&�#�''"�����

���������"���#,��#��#����#�������

��" �������������� ���*�#������ "��#"���#����� ��� ���#����"��� ���

*�"��������#�����#�"������'����� �*�#������ "��#"������ ��*���#����'�

��������"���@�"#"*�#��A�

Page 152: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

7–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����'� ��"���" �#�#"���������"�� ���"��#5������#����'"���#"���

Server

Workstation Workstation Workstation Workstation

Direct–Connect Processing

��������������#�&����*������������������'������"�'���#"���

Understanding Store-and-Forward Processing

�������������"�����#���#��5���5'��������� �'��������������#����#�

#����#"����������&#�#"���#��#�"��"������#���'����������-���:��� ����

� �������#�#"�����&"��������'���#����''"������������ ��#���#����#����

������"#��#��5���5'���������"����#��#�����������&����#��#�����#��&

�#��� �#��#"�������#��'��#�����#��

Page 153: Cnc - Jdedwards Xe

Understanding the Modes of Processing

7–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����'� ��"���" �#�#"���������"�� ��#��5���5'��������'"���#"���

Server

Laptop ComputerLaptop Computer Laptop Computer

Store-and-Forward Processing

����� ����� "��#"�����"�����'��#�������'������������#����� "��#"���

�������� "��#"�����'�����"#����#�#"����#�������#����"#"�� �"�'���#"���#��#

��#�*���� "��#���������������$'#��#���"�"#"� ���"#�������� �#�������� �

#���#���#����#"���"����&�#�* ����� ���D�'" ������#�����&#�#"����������

��#��&�������#"���"��#�* "�����D�'" ������� ������#��#�����#��"������

����#����#"��������"#������"��*������#��*�"���'���#"���#��#�#���

����#��#��������"�#��#����#"���'" ��

������ ������������"���"�#���*�#��������#������"�"#"�#���#��'����#�

'���������&#�#"���������'���#���'� ��"��<

� ���"������"�'���#"���'���#�����&�#�* �����#�����&#�#"���#����&

#�* �����#������

� .���#��#��������#"������#� �@-��6/D/A�#�* �����#��������"#�����

#����#"������������������"��������'�#���'� ��"���#�#��<

�� �����������"�������� �#���"#������������ �#���"#���#����

� .���#��#��������#"������#� �#�* �����#�����&#�#"���#��"��"��#��#��#

����� ���� ������#���#����#"������"������#������ ��'��

�� ���"���#�������#����#"�������#���������

� )���&������#��*�"���'���#"������#�������#������#�� � ��� ���"#"��

�������"#"��� ���"#"���#��#������#���������"#"�� ���"���������#������

�"#�������#��#����������#�#����#"���#�* ��

Page 154: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

7–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ���������������������#��#�����&����#��������������

��"�������� ���#����

� .���#��#��������#"������#� �#�* �����#�������������&#�#"����"#�

#���#�#���'������#����#"����������"��#����� ����

������&����#������#��#�����������:���#���#����������������'�

��������� �#���+�*�@�"#�����"#���#���A������ �����������" ������#����

#�����#�" ��)'�#�������;�"���������#"�����" ���������"��#��*"������#��

�:��#�#����#"��������#�������������

��������������#�����*��*)�����������������'������"�'���#"���

Understanding Batch-of-One Processing

B�#��5�'5��������"������*"���#�����'�������*���'"#��'�#��

#��5���5'��������� ��"#��#����� 5#"�������#���'�#����#"�����#��'�����"�

�"��#5������#�����"����B�#��5�'5��������"������#���#�������'����

��� "��#"���@26��6DA��"#��#���#�����������#"������"�����#��'���:��� �

2�! ����"��������#��� ��� ���&#�#"�����������"�� �������#"���#��#��

��#��&������26��6D���� "��#"���#" ����#���D5'" ��*�#�#����#�* ����� ���#��

���#�����#��"������������� ������"��"##����"��# ��#��#�����#��"�

����

B�#��5�'5��������"������# ����������#��&�#�''"��*������#���26��6D

��� "��#"�����'���'����'"� �5*�5'"� ����"#��-��#�"������"�"��� �'��� �

������#�������"���������#��&�@�$1A�

�����'�#���#���5�''�#��*�#��5�'5��������"���"�#��#�#�������"�������"��#

�����#��#���-6��/�����-6�//�'" �����"������#�"��#�����#�����#����

���� �#����#������ �� ��������"����#���26��6D���� "��#"���������#��"��# �

�����#����'" ���"#������� ����"��������#��������� �#������#�����"��#���D

'" ��������#�����������������#��#��������#"���'" ��@-6��/�����-6�//A�

#��������� �������#�����#���26�/����� "��#"���#����"��������#������� �#���

� ������

����'� ��"�������"���:� �"������*�#��5�'5��������"�����&�'��� �

������#������"��<

Page 155: Cnc - Jdedwards Xe

Understanding the Modes of Processing

7–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

P4004Z

Connected State

R40211Z

Z – Files� F0041Z� F4001Z� F4011Z

P4004Z

Enterprise Server

Production� F4201� F4211

B�#��5�'5��������"������#���������'�����"������" �* �<

� ��*�#��

� �� "�������

����#�����"#���#�����'�����"�����������#�������"�����#"���"��#��

%���"���������� "��#"���@26��6DA�

Subsystem

�����*�#���#�����'�*�#��5�'5��������"����������"����'�#���%6��//D

*�#������ "��#"������"���"��#���*��&������������*�#���*�#������ "��#"��

��"��"�� ������&�#���D5'" �����#�����#��"���������'���#���*�#�����"#

'���#"����������#��"�����#����������#��*��������������#����#��'��#��

��#��'���#���D5'" �����#�����#��"������"�#�������#"���#�* ��-6��/����

-6�//�

����?�"���D���������'�#���%6��//D�*�#������ "��#"���"��"������"#���

��"����'� ���" "���������"������#��#�#�"�*�#������ "��#"���"����"����#��

'�;�������'� � �#"���������������"���"���#�#���*�#�����'��2.������

���#�����#��"����������� ��*�#��5�'5�����*�#��������*���#" "G���"���

�����#"������"�����#�������������* ��'"����'��#�"��� ������ ��*�

/8������" "������������������/8�������

Page 156: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

7–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Online Mode

������ "�����#"�������#�#���*�#������ "��#"����"�#��� ��#"�������

'� ��"������� �#"����'�#���� �������$'#��� ��#"���#����"�#�������"����'

#���%6��//D�*�#������ "��#"�����'���#���*�#�����"#�'���#"����#��'�"���#��

��#��'���#���D5'" �����#�����#��"������"�#�������#"���#�* ��-6��/����

-6�//�

����� ������� ����#��#�����&����#���.�������"#����#������#"���#�

���������� ������#�#���������������������"���#����#����������"#����

�"���� �������

Understanding Zero-Client Processing

D��5� "��#�����"������* ������#��������#�#������� ����� "��#"������

��#��'���������&#�#"����"����� �����)�#���#�*�������"�������'

����"���"�"�" ��#���"��#5������#�����"���*������#�����#������#��� ��"�

���#����"�������#� � ���#"������"����'"���#"���� �������#����" ����"�#�"�

#������;�"����#����������&#�#"����-������"�'���#"����*��#

G��5� "��#�����"�������#������*'������ ������������

Page 157: Cnc - Jdedwards Xe

Understanding the Modes of Processing

7–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Page 158: Cnc - Jdedwards Xe

7–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Working with Direct-Connect Processing

)���"��#5������#�����"������&#�#"������������#����"��# ��#������#��#

����#�����#����������� ��"���-����'������������������" ����#�#�

�"#"*�#��������#������ ��"��"����������#��#���������#��&�#�''"�����

���������"���#�������#��#����#�������

����'� ��"���#��"�����"�������#"���'���"#"*�#"����*+��#�#������#

��"����"��#5������#�����"������'"���#"��<

� %���������#"���'����#������ ��"���"#"*�#"��

� ��##"�������"��#5������#�����"��

� .���#���"����*+��#�����"���'���"��#5������#����"�����#

Recommendations for Data and Logic Distribution

������"����#���*�#���'��������"#���"��#5������#�����"��������������

���������#���'� ��"��� ���#"���'����#������ ��"������"��<�

� 9�������#����#"�����#��#������#������

� 9��������'"������������������#��#�����&#�#"����E�������� �����

�#���#�#"��'" �� ��� ���)'�#�����"�#���������#��������#�������

��'��������#���"������"���#����#�* �� ��� ���������������#����#�

����#������

� 9���� �*�#������ "��#"���#��#�����#��"�� ��"������

Setting Up Direct-Connect Processing

����'� ��"���"��������"����'�#��������"��� ����"���##"�������"��#5������#

����"���

/� ���#���������#"������"�����#�������"'��#��#�#����������"�����#

����������#"�����#�������

�������������(����������'��"�'���#"���

�� )'���� "��* �����#��"���#���������'�#�����#��*�"���'���#"������

��� ������#��#�������

Page 159: Cnc - Jdedwards Xe

Working with Direct-Connect Processing

7–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����7�����������'��������)��������'��"�'���#"���

� 9��"'���*+��#����'"���#"���9����������"���'��#����������"�����#�

��������������#�#�� �$���������������������'��"�'���#"���

Understanding Object Mappings for Direct-Connect Environments

������"���������������'"���#"���������"��#��;�"���� #"� ���"��#5������#

���"�����#��-���:��� ���#������#��� #"#"�������'"���#"���������"��#

�����������"�����#�#��#������ ���� "��#"�������"���#����������������#�

#���������#��������:��� ���'��#����"��#5������#����"�����#�"�� ���<

� 9�#����#�����"�"#�#"������"�����#

� �#�#��"�����#"������"�����#

Master Data Administration Environment

������#�����"�"#�#�����#���9�#����#��$��"�"#�#"������"�����#�#�

��"�#�"��#�����* "����#�* ��"��#������#� � ���#"��������#����#�"����"�����#�

���#���'� ��"��<

� 9���� �#�* ���*+��#�#����*�"�����#����#�����������������

� 9��������'"������������������#�������#� �#�* ����#�������������

������������#� ���#�����#�"��#�����* "�����#��'������'"��������

� 9����#���#�* ��#��#����#�����#������

� 9����*+��#�3"*�"���#�* ��#��#����*+��#�3"*�"�����#������

� 9�����#���"�#"�����#�* ��#��#�����#���"�#"�������#������

� 9���*�#������ "��#"���#��#������

Strategic Reporting Environment

�����#�#��"��%���#"������"�����#�����#����'"���#"���#��#�����

����#"��� ���#���� "��#���#�����#�����#�������'��#�#��"�����#"��

�����������#����#�"����"�����#�����#���'� ��"��<

� 9���� �#�* ���*+��#�#����*�"�����#����#������������������@#�"

��#���������� �����#�"��#����� "��#�����#��'�����#"��A

� 9��������'"������������������#��#�����&#�#"��

� 9����#���#�* ��#��#����#�����#������

� 9����*+��#�3"*�"���#��#����*+��#�3"*�"�����#������

� 9�����#���"�#"�����#��#�����#�5�"�#"�������#������

� 9���*�#������ "��#"���#��#������

Page 160: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

7–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Locating Master Business Functions

)�����"��#5������#����"�����#�����������#��"���#"'��#�����#��*�"��

'���#"�����#��#�������������#����#���������

��������������������������������

-����*+��#�3"*�"����#����/�"��#���H����B���:��� ���� ����'�

-���#"��������

� "�&�-"����$� "#��'�9�#��B�"���-���#"���������

Page 161: Cnc - Jdedwards Xe

7–13OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Working with Store-and-Forward Processing

�#��5���5'�����"���������'�����"���#��#����* �����������

�"������#���'���������#����#��#����#"��������#���� �#��������#�#��#��

����#���� ����#����#����#"����-���:��� ���� ������ �����#����������

��� ��#������������#����#"�������#������ ����#����#����#"���#��#��

�����#��� �#����#����#��5���5'���������� ���� ������#���#�#��#�����

#��5���5'�������� "��#"���*��� ��"���#����#����#��#����#"���"���

�"������#���#�#��@��"���"��������'�������*������#������ "��#"��

��'���� ���"#� ��� �A������#������ ����#����#����#"���#��#���������"��

�''5���&������

����� ����'����"�"�� ���"#"����'�#���#����#"������#���#��5���5'����

����"������"���� ���'��'�#���#���$���#��*�"���'���#"�����'���#��

'� ���"#"��������#�������� ����#���#��5���5'�����#����#"���#��#��

��#��"������

���"���#���'� ��"���'��#��#��#���#�*��"��� ����'��#��5���5'����

����"��<

� $������'���� "��#"���*�"�����#��#��#��� ��� ���&#�#"��

� $������'���� "��#"���#����#�����#�������@#����"�� ���#��#�* �A�#�

#��� ��� ���&#�#"��

� $�#��5���5'��������"�����#�'���"������#���#����#"�����#�

� $��"��#5������#����"�����#�'���� ���"���#����#"���#��#�����#��"�

���

&������������"�#�"����#��"�#��"#������������#�������#��#���";�����:#

���*�����������#�#�����:"#�'�������#�������'���������������"�����

����*�"����;�"����#����������������������#���'� ��"���� �#"��<

� )'�������#��"��������� ����*���'�#��5���5'����������������

�"���������#���������#�#����'�����������-���:��� ������/��"��#

�����#����������#�#�����/��������"��#������#����������#�#�����������

��������������/��� ��������������*��/��=��#���������� ��*�

/��=�/��.������� ��'����������/��=������"���#�������"����#�

����#"���*�����#"�����#����";���#�������"'"��� ����������

��"�#�"�"�������#��*�"�����#����"���#����� ���������

���������#����� ������������#�#����'��#�������'�������

*�����������"��#�������������#�#����'���#�������"�����

��#��"��

Page 162: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

7–14 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�������#�#���������'���$�5D=��)'�����#�"�&������"��#����� ����

�������#�#����'��#��5���5'���������������� �����"���#��

'� ��"���� �#"���#����"�#�"����#��"�#��"#��"����#��5���5'����

���"�����#�

� )'�������#��"������� �������*���'�#��5���5'����������"��

������������";���������'���:#����*��#���"���#��������-�

�:��� ������/��"����� �����*��*�#��������/5====��������"��

�� �����*��*�#�����/����5/====������������9� #"� ������������#

�������*�����������#��"����"�#�"����#��"�#��"#�����"���#���

����*���"''"�� #�#������������������� �����#�"���#������ ��"'��#��

��#�����" ���#���&�'��������#��"��

����'� ��"���#�&��:� �"������#���#����#��5���5'���������"��<

� ��##"������#��5���5'���������"��

� $��"�"#�"���#�������'���������"��

� 2�'��"������5���#�&

��"�#��"�����#�"��#���'� ��"���#�* �<

� �����"�� ���#��#�* ���������'��#��5���5'����

� B�"�����#��#�* ���������'��#��5���5'����

Setting Up Store-and-Forward Processing

-� ��"������#���'"#�#���������� ����'���������##"�����

#��5���5'���������"������"�"������5#"����������������'#������

��&#�#"���"�#� �#"���

������������A���A����������������5

���#�����������"�����#�'������#��5���5'���������"������"

���"�����#���� ��������������#"�����#��������E��������� �#�"

���"�����#��-2�! ������#�"���"�" ��

�����#����#��#������"�����#�*������"�������:"#"������"�����#�

*������#���������" �"�� ����#��#����"�����#J��*+��#����'"���#"��

9������@��9A�����"����$ �����&�����#��#�#�����#5"�5#"��

)�#� �#"���' ���"��#�#��1�#���"�* ��+�#5"�5#"���"�#� �#"���'��#��

#��5���5'��������"�����#�

�������������(����������'������"�'���#"���

Page 163: Cnc - Jdedwards Xe

Working with Store-and-Forward Processing

7–15OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

."���#����*+��#����'"���#"���9����������#������'�� #�����'��#�* �

@�B3�A��*+��#�'��#���#��5���5'��������"�����#�#��#���"�#�#��#��

��� �9"���'#�$������#��������� �������� ��3��� �5�2�! �

��������������#�#�� �$���������������������'������"�'���#"���

$'#��������������#���#���#��5���5'��������"�����#������"#�#�����

#��5���5'�������J����"�����#� "#�

��������������(�������������"������������������ ���"��#��������������������������'��"�'���#"���

�����#���#��5���5'�����9"���'#�$������#�*���@�#��-�����*A

#��#���������������"����������#�*���"� ���#���"��#���LL��� ��������������#�������L*! L� ����L��#���"��#������#������ �����#

����������#�����#�*���#��#���*!L��! L��#���"��#������#��

���"�"#�#�J� ��� ���&#�#"����E������������#���9"���'#�$���

��#�*��������#���*!L��! L��#���"��#������#������"�"#�#�J

��&#�#"���

-���#���*!L��! L��#���"��#������#������"�"#�#�J���&#�#"���

�:��#�#��#����#��-�����*���#�*���#���'� ��"���#�* ��'������

���*!���*���#�*���#��#����������#�����#���#�<

ÑÑÑÑÑÑÑÑÑÑ-���6

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

.����'"�������������ÑÑÑÑÑÑÑÑÑÑ-���8 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ.����'"��������

ÑÑÑÑÑÑÑÑÑÑ-���� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ9����9�#��-" �

ÑÑÑÑÑÑÑÑÑÑ

-����/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

9������ ��#"���-" �

ÑÑÑÑÑ-��� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ9������:#����"���-" �ÑÑÑÑÑÑÑÑÑÑ-���6

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

9����2�#��-" �

�����#��#�#������"�"#�#�J���&#�#"���"��#���������*�"*��#��#��

��������������'"���������#�* ����#��#�'�#���� ���������#��� �#�#

#�* �����������������#�#��&�.�� ��������� ������"��#��������������������������'��"�'���#"����*��#��*�"*��

-���#���*!L��! L��#���"��#������#������"�"#�#�J���&#�#"���

�� �#��#������*!���*���#�*��������������#��-�����*�#�����*!���*�

."���9"���'#�$����������#��#�� ��'�#���#����"�� �����*�"�����#�

#�* �����"��#������*!���*����#������"�"#�#�J���&#�#"�������#��#��

�'�#���#�* ��@�:���#������'"�����������������A�������#��

)'�����#�* ������""����"���#�#����'���#������*!���*���#�*��

���#������#������ �����#�����"��#���'� ��"�����#�<�LL��� ��������������#�������L*! L� ����L��#���9�&���������"���#��� ��#��

#��#���������#�#�����#������#�"��"���#��� �����#��#�* ��@�:���#�'�

�����'"�����������������A�

������ ���#���"�#"�����#�* ��@-=�KA�����'� ���#���"�#"������$9�'" ��#�

#���#��5���5'������ "��#�����"���

Page 164: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

7–16 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����%��#��� �%� ������������������*��*)����������'��������&%� ������������������*��*)�������#�#��������'�#�"�����#��'���� "#��'� ��'�#���#�* ���������'��#��5���5'���������"���

��"����� �#������"�"#"� ��#����'�#��5���5'���������"����E�����#

��'���#������"�"#�#"����������5���#�&��:� �"����"��#�"�����#���#� ��#

�����#�����* ��#��5���5'���������"���

Administering Store-and-Forward Processing

����'� ��"���#�&����#��#������*!���*�9"���'#�$������#�*������#��

���"�"#�#�J���&#�#"����E������5��������#������*!���*���#�*���#�

��'���#��5���5'���������"���

&�������E�����#���'���#����#�&��#� ��#��������������"�"#�#�

��� ����'���#����#�&��������� ������� ��#������������#����������#

��#��'������#�������'��������������#�&��'�����������#������

'�����9"���'#�$������#�*���

���� �#��#���'� ��"���#�&��"�������#����'�����#"������"�"#�#"��<

� ���� ���"���#����"�� ���#��

� ���� ���"���*�"�����#�

� 9�&"���#�����#�*�������"* ��#�����5��

� ?�"'�"���#�������#�#��5���5'������##"���"��#���+���"�"�'" �

Downloading Technical Data

-��#��5���5'���������"����������#������#���#����"�� ���#��#�* ��'��

#��������#"������"�����#�#��#������"�"#�#�J���&#�#"����.��#���2��� �#�

��#�����* ��'���#���(�-�����*�#������ "��#"���@%=�6� A�#����'���#�"

��������"���������������* ���"�#����"����* ���������#�����#��

#����"�� ���#�� ��� ���'#��#����"�#� �#���#��5���5'��������&�����@.����

��#�����������#��#���������"���#��5���5'�����#����#"�������"���A

�������"�"#�#�J���&#�#"�����#������#��� �#�#������#"������&���

"�#� ������"#��E��������#����'���#�"�#�&��� ��"'�����#����"�� ���#����

��������

������������������������

-���#�����#���$��"�"#�#"������ ������@74=�//A��������B�#��

?�"���@2=� �8A�

Page 165: Cnc - Jdedwards Xe

Working with Store-and-Forward Processing

7–17OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���#�����&��"#��B�#���?�"���'����#����%=�6� �"��#���B�#��

$�� "��#"���'"� ������#����� "�&�-"���

������#�����"���#"# ���2��� �#����#�����* ��'���#��5���5-�����

����#����� "�&��� ��#�

���#���?�"���2���#"���'����������#�����#���� ��#"�����#"������

#����� "�&���*�"#�

���#�����#���� ��#"���'���������#��#�� ��'�#���#����"�� ���#��#�* ����

"#���"��#�����#��� ��#"��������'�#�"�'���

����%��#��� �&�%� ������������������*��*)������'���� "#��'�#���#�* ��

� "�&��C�

����2���"�����#"���'���������

��#��#���'� ��"����� ���'��#�������"�����#"��������� "�&��C<

����������6�������

�������������������

����������>� &�����

�������������������

�������������B���

��6���������������

��������>%

��#��#���������'�#���#��5���5'��������"�����#�#��#

�������#�����������-2�! �

���������������������

�������������������

����������>

)'����������#���#��#������"�����#"������#��#���������'

#���#��5���5'�������#�������

�������9$9�������

4������������������9@9

������������������

���>����������������

�����������������>� &�

������������������

������������������B

�������5��������������

��>%

E������ ��� ������#����'�������#�#"�����#��*�����

#�"�*�#�������� ��&��#�#����������#��E,1�' ���"��#��

�*+��#�3"*�"��������#����#��"������#�����#����� �

*�����"���'��#�"�#�* ���B�����������'�#����#����"��

#�* ���" �*�����"'"����"#����1��'��#����������#��E,1

' �������� ����'���'��#�"�����"�����#"�������

����� ���" �"�����#��#�' ������������� ��'����

���� ������#"�����#��'��#����#�* ��

������������������

�����������������5���

���>� &�������������

������������������

������B��������������

��������������������

��>%

3�����* ��&�"'������������"���'����������#�������

�������#�����:#�����"�����#"���"�#�����)'��������#�"

��#"������#������#����������������������� ��3��� �

Page 166: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

7–18 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�����������������

��6��������������

������������������

����>� &�������������

������������������

������B����������

��6���������������

��������>%

)�#�����'���#�"�������#���������������#��#���������'

#�����������"�����#��.��#�"���#"���"�#�����'�#��

���"�����#"���"'������������ #"� ����#�������'��

��"���#�������#��#�� ��"����"#�"���������"�����#�

�������9$9�����4����

7���������9@9��������

�����6�������

�������>

��#����#�������#�������#����������#���#����"�� �#�* �

#��#��� ��� �����"���

�������919���8�A�����

������5�������������

����������������

������������

�������>��������������

�������A�����������>

��#��$�#��� ���'" �������5���#��#�����#��

�������9$9�����������

�������������������

��5������������>

3�����* ��&�

�������9C9������

�������������

�������5������5������>

����������������

���5��5�������>

3�����* ��&�

�������9$9�����������

��������>�����������

������������������>

��#��/�#���"�#��� ��#����:���#"��� "����'�#������#�

3�����#�"���#"���* ��&�#���"�#�#������#�

��"����#����"*���������������#������"���#��

���� �����"�� ��"����� "#��'�����#����"�� �#�* ���""��

'���#������*!���*�9"���'#�$������#�*������#��

���"�"#�#�J���&#�#"���

�������9C9������������

�����������9 9��������

�������������������>

��#��E�#�����#��� �#�* ��

�������9C9����������

���������������������

9 9���������������

����������>

��#��E�#���"�#�� �#�* ��

Page 167: Cnc - Jdedwards Xe

Working with Store-and-Forward Processing

7–19OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$'#��������#������"�����#"�����������* ������������������* �������

*�:����������"�"�����#�#���'�#������� ����

Downloading Business Data

B������#���*�"�����#��"������*���� #"� ��#��5���5'������������#�"

*�#��������#������ ����#��������'��#�����#��#�* ��#��#���#�"��#��� ��'

#���#��5���5'�������� "��#"���'���#�������#��#������*!���*�9"���'#

$������#�*���

Before You Begin

� .��9"���'#�$����#�������#��#�� �*�"�����#��#�* ����'"�"#"����:"#

�"#�"��#������*!���*�9"���'#�$������#�*������#������"�"#�#�

��&#�#"���

������������������������

-���#�����#���$��"�"#�#"������ ������@74=�//A��������B�#��

?�"���@2=� �8A�

���#�����&��"#��B�#���?�"���'����#����2��/6��"��#���B�#��

$�� "��#"���'"� ������#����� "�&�-"���

����-��� ����5���� �#���*�"�����#��#�* ���������#����#��

���"�����#���#�*������#"���*�#������ "��#"���%=�6� �

$ ��'�#�����"���#��#�������������"����������������"������#��

*�#���������#��#����� ����#���*�"�����#��#�* ��

E�����#�����������"����'�#���*�"�����#��#�* ��#��#���������

���"���#��#������"�"#�#�J� ��� �����"���

����'��������&�%� ������������������*��*)������'���� "#��'�#��*�"�����#��#�* �����������#������ ����

������#���*�"�����#��#�* ����"��������#����������%���?�"���'��

#���%��������

���#���?�"���2���#"���'����� "�&���*�"#�

���#���%���#���#��#���#"��#"���'��������������#"��#"�������#���

� "�&��C�

Page 168: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

7–20 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���#������"�����#����"���'�������� �#��#���'� ��"���'"� ���"#�

#���������'�#�����������"�����#�����#����� "�&��C<

� ���������"�����#����"���@�����#��#�#�"�"���������

�����#"������"�����#����"�����"�#�#��� ��'�������* "���#�* �

#��#�����������#���A

� ����#����"�����#����"���@#�"���� ��*������#��5���5'����

���"�����#����"������ �������� ��'�"#���9�����"�����"�#"��

#������� ��3��� A

)'������ "�&���B����*�##����#������"�����#�������'���������

������#��������"�#�����"�����#������� "�&��C�

B�����������#��5���5'�������� "��#"��5���"'"�����������#��

�����"�#����"���'��#����#��5���5-��������� ����@2��/6�A�*�#��

��� "��#"�����������"������� �#��������#��#�* �����#������*!���*

9"���'#�$������#�*���������#��#�#���*�#����������� ��� �

@�#���#������������A�

.���������#�"�*�#��������'���#��"���&#�#"����'#��#��������

���"���#���9"���'#�$������#�*���'���#�������#��#��"���&#�#"���

��"���� �������#������"�"#�#����� ��&"��#�"�#���� ���"���#��

*�"�����#��#�* �����#��

Making the Database Accessible to End-Users

��"�#�&��:� �"������#����� ���#������*!���*�9"���'#�$������#�*��

���#����"#��#���#����"�� �����*�"�����#������ ���"����������E�����#

��&��#�"���#�*�������"* ��#������#��5���5'��������*������#�"�"�#��

��#�*���#��#�#���������#��#��"���&#�#"���

�����3�����������������������������A�����

�����#������*!���*�9"���'#�$������#�*���'���#������"�"#�#�J

��&#�#"���#���������'� ������#������ �����#�����

%�'���#�"���#�*������������#��&��������*�"�����#��������"G���

Page 169: Cnc - Jdedwards Xe

Working with Store-and-Forward Processing

7–21OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Verifying the Correct Store-and-Forward Settings in the jde.ini File

��"�#�&��:� �"��������#��5���5'�������J�+���"�"�T�B��E���9

����)17�U���� ��*���#������+���"�"�'" ����#�*���#�#�"�����'�

#��5���5'���������"���#����&����������5��J���&#�#"���

���6��������������������A���A������������5�����������>��������

)������#��5���5'��������5��J�+���"�"�'" ��������#��#������#���T�B

�E���9�����)17�U���#"����#�����'�� #�����"��#�#���-2�! ��$ ��

��"'��#��#������#���T�B��E���9�����)17��5�����1�$%EU���#"���#��

��'�� #�"��#�#������� ��3��� �5�2�! ����"���'�� #����"�����#

������#��� ��� �$������#�*����'#��#����"������#��&���#�*��

�##"���#"�����#�

E�������� ��������������#���"�'�'" ��#�������#�����'�� #����"�����#

�#�#���-2�! �'�����������#"������&������#��#����

#��5���5'�������������#������#������#��#��"�+���"�"�'" ���'#������

��&#�#"���"�#� �#"���

�����##"������ �� ��&� "&��#���'� ��"��<�

[DB SYSTEM SETTINGS]Default Env=SFPD7333Default Pathcode=PD7333

[DB SYSTEM SETTINGS - SECONDARY]Default Env=OneWorld Local - PD7333Default Pathcode=PD7333

Performing End-User Tasks

����'� ��"���#�&��:� �"�����#�����#��5���5'��������5�����#

��'���#�����#��5���5'���������"���

���� �#��#���'� ��"���#�&��"�������#����'������5���#�&<

� .���#"���#������5�����#�*���'��#��5���5'����

� ��#�"���#��5���5'�����#����#"��

� .� ���"���#��5���5'�����#����#"��

Page 170: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

7–22 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Updating the End-user Database for Store-and-Forward

E���#��5���5'����������#���'���#�"�#�&��#� ��#������#�����* �

#��5���5'���������"������#��"���&#�#"���

0�������E��������� ����'���#�"�#�&��������� ������� ��#������

�����#����������#���#���E������ ���#�* "����������'�������'#���#��

����'�������������#���'���#��"�9"���'#�$������#�*���'���#��

9"���'#�$������#�*������#�������

��������������A���������������������A���A�������

�����#��#�����#��5���5'�������������#�������#������#"��

���&����"�#� ������#��"���&#�#"���

�"#��#��"���&#�#"���������#���#��#�����#��"�����������

#��5���5'�������������#������*!���*�9"���'#�$������#�*��

'���#��������'� ������#�������#��#���*!,��#���"��#������#��"

��&#�#"������"����" ��� ����#������*!���*���#�*���� ��������#��"

��&#�#"���

Entering Store-and-Forward Transactions

��"�#�&��:� �"������#��������������J���&#�#"���'��#��5���5'����

����"��������#��������#�� �����#������� ��������#��#��5���5'����

#����#"���

������������A���A������������������

$'#��#��� �#�#������#"������&��������#��� �#�#����*!���*�9"���'#

$������#�*������*����"�#� ������#��"���&#�#"������������

#��5���5'���������"������#�#��"���&#�#"���'���#�����#��"�

��#��&������*��#�#��"���&#�#"���

�"#��#��"���&#�#"����"������#���'���#�����#��"��������������

�����#������� ��

����� ��'"#��##���#�#��������#�#��#�����#�����#�������

������#�����#������������������������

� "�&������ �

����� ���"#����#��#�����������*�����#����������"���"���"�#"��

��� ��@����� ��3��� �5�2�! A�

Page 171: Cnc - Jdedwards Xe

Working with Store-and-Forward Processing

7–23OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

E���#��5���5'������������������#��#��"�#��5���5'�����#����#"���

�������� ������ #�#������ "��#"��5���"'"���������#�#"���'�

#��5���5'���������"����'�+���� ���#������������#�������� �����

��#��#����#"���

Uploading Store-and-Forward Transactions

��"���������"*������#���� ����#��#�����#��"������#���#����#"��

��#����*��#��5���5'���������$�*�#������ "��#"����� ����#����#"��

'���#�����&�'" �����#��� ��� �����"���#��#�����&�'" �����#�������

�������������A���A������������������

$'#������������������ �#���#��"�#����#"���������������#���� ����#��"

#��5���5'�����#����#"��<

4����#����"����''������ ��

4����#�����������#�#��"���&#�#"���#��#�����#��"����#��&����

�*��#�#��"���&#�#"���

4����#����"�����#��#��"����� ������#"������"�����#�

���#�����#���$��"�"#�#"������ ������@74=�//A��������B�#��

?�"���@2=� �8A�

���#�����&��"#��B�#���?�"���'����#���������'�#���'� ��"��

��� "��#"���"��#���B�#���$�� "��#"���'"� ������#����� "�&�-"��<

� %�=//D/�'������� ���#��.� ���

� %�6//D/�'��?������.� ���

� %6�/�/D�'���� �����������#"���.� ���

E�����#����������'�#������"�������#� ��#���� ���������#�����'

#����#"���#��#�������������"#��#��5���5'�����

������#����� ������"�������#����� "�&��� ��#�

0�������������� �������#�����#���������#����#�"�*�#��

��� "��#"��� ��� �����#�����&#�#"���

Page 172: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

7–24 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��"���������"��#���'� ��"���#��5���5'�������&�'" ��'������

��&#�#"���#���������<

� �����#"������#� �-" ��@-��6/D/A

� ����� ���#�������#"���5�B�#���-" ��@-�=//D/A

� ?�����������#"���5�B�#���-" ��@-�6//D/A

� B�#���%���"���-" ��5�����4���"���@-6��/DA

� B�#���%���"���-" ��5�������#�" �@-6�//DA

$'#���������������� ����*�#�������������� �����#�������"� ����

#���""����� �������#�'��� ��'�#���#����#"���#��#������� ����#�

#�������

.��#�"����#�#����"'��#��#������ ���� ������#���#����#"��

����# ��

-���#���������������� ������#�����&��"#��B�#���?�"���'���

#���������'�#���'� ��"������ "��#"���"�#��#���B�#���$�� "��#"���'"� �����

� "�&�-"��<

� %�=//�D�'������� ���#��B�#���2����

� %�6//�D��'��?������B�#���2����

� %6��//D�'���� ������B�#��������#"�����"#�

%���"���#���*�#������ "��#"������#�������"��#���#����#"���'" ����

#��������"���#�����#��'���#�����&�'" ��

�#��5���5'���������"���"��������� �#��

Technical Data Tables Needed for Store-and-Forward

����'� ��"���#����"�� ���#��#�* ����#��"������#�����J� ��� �����"���#��#

#���#�* �����'��#��5���5'���������"����

����&��� ������%��#��� �&�"��#�"�����#��'��"�'���#"����������#������

#����#�* ��#���� ��� �����"���

ÑÑÑÑÑÑÑÑÑÑÑÑ

����� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ���������

ÑÑÑÑÑÑÑÑÑÑÑÑ

-���� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ1�:#�1��*��5�$�#���#"�

ÑÑÑÑÑÑÑÑÑÑÑÑ

-����/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ1�:#�1��*��*���������,-"�� �E��

ÑÑÑÑÑÑÑÑÑÑÑÑ

-��=� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ3"*���3"#�.�

ÑÑÑÑÑÑ-��=�/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ.���"� ���2�'�����ÑÑÑÑÑÑÑÑÑÑÑÑ

-��=��ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ.���"� ���2�'����������-" �

ÑÑÑÑÑÑÑÑÑÑÑÑ

-��=�6 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ.��)�#� �2��&���

ÑÑÑÑÑÑÑÑÑÑÑÑ

-��=�8 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ.��$������'"�"#"��

ÑÑÑÑÑÑÑÑÑÑÑÑ

-��= ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ3"*���3"#����#�

Page 173: Cnc - Jdedwards Xe

Working with Store-and-Forward Processing

7–25OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

���������ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

�����

ÑÑÑÑÑ-��=6 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ3"*���3"#�9�#�ÑÑÑÑÑÑÑÑÑÑ-��=6/

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

���"�����#� ���#�" �5������ �ÑÑÑÑÑÑÑÑÑÑ-��=6� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ�*+��#�2�#��9�#�

ÑÑÑÑÑÑÑÑÑÑ-��=68 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%� ����9�#�

ÑÑÑÑÑÑÑÑÑÑ-��=8� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ����"#����* �

ÑÑÑÑÑ-=�/�/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ)���"������#��#ÑÑÑÑÑÑÑÑÑÑ-=� �8/

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

?�"���3"#ÑÑÑÑÑÑÑÑÑÑ-=� �>

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

2���"�����#"�����:#ÑÑÑÑÑÑÑÑÑÑ-=�>� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ�*+��#�3"*�"���9�#����* �

ÑÑÑÑÑÑÑÑÑÑ-=�>/�/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ�*+��#����'"���#"���9������9���"��

ÑÑÑÑÑÑÑÑÑÑ

-=�>// ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

��#��������9�#�

ÑÑÑÑÑ-=�>/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑB�"���?"������"�����#� �����ÑÑÑÑÑÑÑÑÑÑ-=�>8

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

-���)�'���#"���-" �ÑÑÑÑÑÑÑÑÑÑ-=���8 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ2��&������� �����#������� "��

ÑÑÑÑÑÑÑÑÑÑ-=�=8� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ.�����"�����* �

ÑÑÑÑÑÑÑÑÑÑ-=�=�� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ-��#����"���*��3�������

)�����"#"���#��#���#����"�� ���#��#�* �����&��������������#���'� ��"���#�* �

���#��� ��� �����"���������#�* ����� ��� �����*������#�*������#������

'" ��#��#�������� ��������� "��#���#��#��� ��� �����"�������#��'�������#�

�� "��#"�������<

ÑÑÑÑÑÑÑÑÑÑ����� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ���������

ÑÑÑÑÑÑÑÑÑÑ-���6 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ.����'"�������������

ÑÑÑÑÑÑÑÑÑÑ-���6� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ.����'"���������5�$ #���#��3�����������"�#"��

ÑÑÑÑÑ-���8 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ.����'"��������ÑÑÑÑÑÑÑÑÑÑ-���8�

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

.����'"���������5�$ #���#��3�����������"�#"��ÑÑÑÑÑÑÑÑÑÑ-���� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ9����9�#��-" �

ÑÑÑÑÑÑÑÑÑÑ-����/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ9������ ��#"���-" �

ÑÑÑÑÑÑÑÑÑÑ-��� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ9������:#����"���-" �

ÑÑÑÑÑ-���6 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ9����2�#��-" �

����'� ��"���#�* �����#�����#���"�#"�����#�* ��#��#���#��"��� ��� �����#��

#��5���5'������ "��#<

ÑÑÑÑÑÑÑÑÑÑ����� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ���������

ÑÑÑÑÑÑÑÑÑÑ-=��� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��#��)#���9�#�

ÑÑÑÑÑÑÑÑÑÑ-=��/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��#��-"� ������"'"��#"��

ÑÑÑÑÑÑÑÑÑÑ-=��� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��#��-"� ���"� �����:#

ÑÑÑÑÑ-=�� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��#��)#���$ �������"�#"��ÑÑÑÑÑÑÑÑÑÑ-=��6

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��#��)#���$ "��ÑÑÑÑÑ

ÑÑÑÑÑ-=��8

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

��#���"�#"�����5����9�����2�����)�ÑÑÑÑÑÑÑÑÑÑ-=��! ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��#���"�#"�����5����9�����)�'���#"��

ÑÑÑÑÑÑÑÑÑÑ-=�/� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��#��-"� ������"'"��#"���@����� �A

ÑÑÑÑÑÑÑÑÑÑ-=�// ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��#���"�#"�����5����#�-"� �

Page 174: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

7–26 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����'� ��"���#�* �������"���������" �* ��"'��������#�#���'�����#��'�

#�* �����������#������#����*� �#�� �#�#���#���E�������'"���#����#�* �

�����"������#���2�"��"��%�� "��#"����'������"�� ���* �������@74=//A�

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

8�������

�����ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

���������

ÑÑÑÑÑÑ%=/���� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�1�:#�1��*��5�$�#���#"�ÑÑÑÑÑÑÑÑÑÑÑÑ%=/����/

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�1�:#�1��*��*���������ÑÑÑÑÑÑ

ÑÑÑÑÑÑ%=/��/>8

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�9��"���*+��#

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/����8 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�9�������������

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/��=� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�3"*���3"#�.�

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/��=�/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�.���"� ���2�'�����

ÑÑÑÑÑÑ%=/��=�� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�.���"� ���2�'�����-" �ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/��=�6ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�.��)�#� �2��&���

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/��=�8 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�.��$������'"�"#"��

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/��= ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�3"*���3"#����#�

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/��=6 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�3"*���3"#�9�#�

ÑÑÑÑÑÑ%=/��=6/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'����"�����#� ���#�" �5���ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/��=6�ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'��*+��#�2�#��9�#�

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/��=68 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�%� ����9�#�

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/��=8� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�����"#����* �

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=��� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'���#���"�#"�������* �

ÑÑÑÑÑÑ%=/=�/�/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�)���"������#��#ÑÑÑÑÑÑÑÑÑÑÑÑ%=/=� �8/

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�?�"���3"#ÑÑÑÑÑÑ

ÑÑÑÑÑÑ%=/=� �>

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�2���"�����#"�����:#

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=�>/�/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'���9�9���"��

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=�>// ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'���#��������9�#�

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=�>//8 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'���* ��������#���������"G"��

ÑÑÑÑÑÑ%=/=�>/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�B�?�����"�����#� �����ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=�>/8�ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'���������'��2��&�������#

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=�>/8/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'������2��&�������'��-" �

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=�>/8� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'������2��&����9�#�

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=�>/> ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�2"�#����'"�"#"��

ÑÑÑÑÑÑ%=/=�>/>/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'���'�� #�2"�#����* �ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=�>/>�ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�2������'"�"#"��

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=�>/> ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�2"�#������*" "#�

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=�>/>6 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'���#��#������"��

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=�>/>8 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�2"�#������"#�

ÑÑÑÑÑÑ%=/=�>8 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�-���)�'���#"���-" �ÑÑÑÑÑÑÑÑÑÑÑÑ%=/=�!�/

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�1�:#�)��9�#�ÑÑÑÑÑÑ

ÑÑÑÑÑÑ%=/=���8

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�2��&������� �����#������� "��

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=��8 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�)�#� �#"���2��&���

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=��> ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�)�#� �#"���2��&������#�"

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=��! ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�)�#� �#"���2��&����B�" �

ÑÑÑÑÑÑ%=/=�=8� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�.�����"��ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=�=��ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�-��#����"���*��3�������

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=���1��ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'���* ���'����#��#

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=��%�1?ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'���#��%�� "��#"������"�����#�9��

ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=�3�7 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'���#��%�� "��#"����������3��

ÑÑÑÑÑÑ%=/=��%2�1ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�2���"����������1�#"'"��#"��ÑÑÑÑÑÑÑÑÑÑÑÑ

%=/=��%2.BÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'���#��%�� "��#"���2�* "��

Page 175: Cnc - Jdedwards Xe

Working with Store-and-Forward Processing

7–27OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

���������ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

8�������

�����ÑÑÑÑÑÑÑÑÑÑ%=/=��%�.B

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

%�� "��#"����'���#��%�� "��#"�����*�"*�ÑÑÑÑÑÑÑÑÑÑ%=/=��?��3ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�����#���#�" �-" �

ÑÑÑÑÑÑÑÑÑÑ%=/=��?4�%ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�����#�4�����-" �

ÑÑÑÑÑÑÑÑÑÑ%=/=�9�H.�ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�9��"���*+��#�H����

ÑÑÑÑÑ%=/=��923ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'����� �#�ÑÑÑÑÑÑÑÑÑÑ%=/=�?$%

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

%�� "��#"����'���* ���'�?�"�* �ÑÑÑÑÑÑÑÑÑÑ%=/=������ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'�����"#����* �

ÑÑÑÑÑÑÑÑÑÑ%=/=��E���ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'���#�����#�������

ÑÑÑÑÑÑÑÑÑÑ%=/=�6� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ%�� "��#"����'����"�����#��B����#"��

Business Data Tables Needed for Store-and-Forward

����'� ��"���*�"�����#��#�* ����#��"������#��� ��� �����"�������'�

#��5���5'���������"������������#����#�* ��#��#��� ��� �����"�������

��#�����������#�* ������#� ��

����&��� ������'��������&�"��#�"�����#��'��"�'���#"����*��#�����#�

�����#����#�* ��#���� ��� �����"���

Before Downloading the User Defined Code Tables

B�'������5������� ����#���.����'"���������@-���6�����-���8A�#�* ��'�

�����'�#�����#"�� �@����������� ���#���?��������#������� ��������#�A�

#������� �����#���'� ��"����"#�"��#����&�����#���������#����#�* �<�

� �������5��������#����'�����#��� ��#"������#����#�* �

� �����#������"�"#�#�������#����� �#���#����#�* ������#��'�#��

#��5���5'��������*!���*�9"���'#�$������#�*������"����'�

���5��

Page 176: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

7–28 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Voucher Entry (P0411Z1)

ÑÑÑÑÑÑÑÑÑÑÑÑ

����� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ���������

ÑÑÑÑÑÑ-���6 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ.����'"�������������ÑÑÑÑÑÑÑÑÑÑÑÑ

-���8ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ.����'"��������

ÑÑÑÑÑÑÑÑÑÑÑÑ

-���>ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��#����#��9�#�

ÑÑÑÑÑÑÑÑÑÑÑÑ

-���� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��#��-"�� �2�##��

ÑÑÑÑÑÑÑÑÑÑÑÑ

-����B ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��#��-"�� �2�##���5�8��2�"���$�����#"��

ÑÑÑÑÑÑÑÑÑÑÑÑ

-���= ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

7���� ����#��#

ÑÑÑÑÑÑ-��/� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ�����������#��#ÑÑÑÑÑÑÑÑÑÑÑÑ

-��/�ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ$$)

ÑÑÑÑÑÑÑÑÑÑÑÑ

-��/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ�����������

ÑÑÑÑÑÑÑÑÑÑÑÑ

-��/6 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ2�����#����

ÑÑÑÑÑÑÑÑÑÑÑÑ

-���� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��:�%� �

ÑÑÑÑÑÑ-��6/D/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ�����#"������#� �-" �ÑÑÑÑÑÑÑÑÑÑÑÑ

-�/�/ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ$����B��&�9�#�

ÑÑÑÑÑÑÑÑÑÑÑÑ

-�/// ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ$����B��&�5����J����

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

-�/8� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

$��������"G�#"����#��#���9�#��-" ��5����2��2$��

$1�

ÑÑÑÑÑÑ-�//> ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ$����*����#�ÑÑÑÑÑÑÑÑÑÑÑÑ

-�6�/ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ���� "��9�#�

ÑÑÑÑÑÑÑÑÑÑÑÑ

-�6//D/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ?�����������#"���5�B�#���-" �

ÑÑÑÑÑÑÑÑÑÑÑÑ

-�=�/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ$�����#�9�#�

ÑÑÑÑÑÑÑÑÑÑÑÑ

-�=�! ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ���#��'�$�����#�-���#

ÑÑÑÑÑÑ-�=//D/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ����� ���#�������#"���5�B�#���-" �ÑÑÑÑÑÑÑÑÑÑÑÑ

-6���ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��:�$��

ÑÑÑÑÑÑÑÑÑÑÑÑ

-6��/ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��&�����9�#��-" �

Page 177: Cnc - Jdedwards Xe

Working with Store-and-Forward Processing

7–29OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����$��"#"��� �#�* ���"��#�*���������

Journal Entry (P0911Z1)

ÑÑÑÑÑÑÑÑÑÑ����� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ���������

ÑÑÑÑÑ-���6 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ.����'"�������������ÑÑÑÑÑÑÑÑÑÑ-���8

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

.����'"��������ÑÑÑÑÑÑÑÑÑÑ-���>

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

��#����#��9�#�ÑÑÑÑÑÑÑÑÑÑ-���� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��#��-"�� �2�##��

ÑÑÑÑÑÑÑÑÑÑ-����B ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��#��-"�� �2�##���5�8��2�"���$�����#"��

ÑÑÑÑÑ-���= ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ7���� ����#��#ÑÑÑÑÑÑÑÑÑÑ-��/�

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ�����������#��#ÑÑÑÑÑ

ÑÑÑÑÑ-��/�

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

$$)ÑÑÑÑÑÑÑÑÑÑ-��/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ�����������

ÑÑÑÑÑÑÑÑÑÑ-��/6 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ2�����#����

ÑÑÑÑÑÑÑÑÑÑ-���� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��:�%� �

ÑÑÑÑÑ-��6/D/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ�����#"������#� �-" �ÑÑÑÑÑÑÑÑÑÑ-�/�/

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

$����B��&�9�#�ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

-�/8� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

$��������"G�#"����#��#���9�#��-" ��5����2��2$��

$1�

ÑÑÑÑÑÑÑÑÑÑ-�/// ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ$����B��&�5����J����

ÑÑÑÑÑ-�//> ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ$����*����#�ÑÑÑÑÑÑÑÑÑÑ-� �/

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

��#����9�#�ÑÑÑÑÑÑÑÑÑÑ-�=�/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ$�����#�9�#�

ÑÑÑÑÑÑÑÑÑÑ-�=�! ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ���#��'�$�����#�-���#

ÑÑÑÑÑÑÑÑÑÑ-�=//D/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ����� ���#�������#"���5�B�#���-" �

ÑÑÑÑÑ-6��� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��:�$��ÑÑÑÑÑÑÑÑÑÑ-6��/

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

��&�����9�#��-" �

Page 178: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

7–30 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����$��"#"��� �#�* ���"��#�*���������

Sales Order Entry (P4004Z)

ÑÑÑÑÑÑÑÑÑÑÑÑ

����� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ���������

ÑÑÑÑÑÑ-���6 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ.����'"�������������ÑÑÑÑÑÑÑÑÑÑÑÑ

-���8ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ.����'"��������

ÑÑÑÑÑÑÑÑÑÑÑÑ

-���>ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��#����#��9�#�

ÑÑÑÑÑÑÑÑÑÑÑÑ

-���>� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑB�"���.�"#�$ #���#�����"�#"���9�#�

ÑÑÑÑÑÑÑÑÑÑÑÑ

-���� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��#��-"�� �2�##��

ÑÑÑÑÑÑ-����B ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��#��-"�� �2�##���5�8��2�"���$�����#"��ÑÑÑÑÑÑÑÑÑÑÑÑ-���=

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ7���� ����#��#ÑÑÑÑÑÑ

ÑÑÑÑÑÑ-��/�

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ�����������#��#

ÑÑÑÑÑÑÑÑÑÑÑÑ

-��/� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ$�#���#"��$�����#"���)�#��#"���9�#�

ÑÑÑÑÑÑÑÑÑÑÑÑ

-��/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ�����������

ÑÑÑÑÑÑÑÑÑÑÑÑ

-��/6 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ2�����#����

ÑÑÑÑÑÑ-���� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��:�%� �ÑÑÑÑÑÑÑÑÑÑÑÑ

-��6/D/ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ�����#"������#� �-" �

ÑÑÑÑÑÑÑÑÑÑÑÑ

-�/�/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ$����B��&�9�#�

ÑÑÑÑÑÑÑÑÑÑÑÑ

-�/// ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ$����B��&�5����J����

ÑÑÑÑÑÑÑÑÑÑÑÑ

-�//> ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ$����B����#�

ÑÑÑÑÑÑÑÑÑÑÑÑ

-�/8� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

$��������"G�#"����#��#���9�#��-" ��5����2�

2$���$1�ÑÑÑÑÑÑÑÑÑÑÑÑ

-� �/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��#����9�#�

ÑÑÑÑÑÑÑÑÑÑÑÑ

-�6�/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ���� "��9�#�

ÑÑÑÑÑÑÑÑÑÑÑÑ

-�=�/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ$�����#�9�#�

ÑÑÑÑÑÑ-�=�! ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ���#��'�$�����#�-���#ÑÑÑÑÑÑÑÑÑÑÑÑ

-6��/DÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ����4���"��

ÑÑÑÑÑÑÑÑÑÑÑÑ

-6��! ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ2�'������4"������-" �

ÑÑÑÑÑÑÑÑÑÑÑÑ

-6��� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��:�$��

ÑÑÑÑÑÑÑÑÑÑÑÑ

-6��= ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ9(�����#��#

ÑÑÑÑÑÑÑÑÑÑÑÑ

-6��=8 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

��'�� #�3���#"��

ÑÑÑÑÑÑ-6�/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ����2���"������%�'������-" �ÑÑÑÑÑÑÑÑÑÑÑÑ

-6�//DÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ������#�"

ÑÑÑÑÑÑÑÑÑÑÑÑ

-6���8 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ3"�����������#��#

ÑÑÑÑÑÑÑÑÑÑÑÑ

-6�!� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ2"���$�+�#���#������� ��@�� ��"'�$��������2"�"��A

ÑÑÑÑÑÑÑÑÑÑÑÑ

-6�!/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ2"���$�+�#���#������@�� ��"'�$��������2"�"��A

ÑÑÑÑÑÑ-6�!� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ2"���$�+�#���#���#�" �@�� ��"'�$��������2"�"��AÑÑÑÑÑÑÑÑÑÑÑÑ

-6�!8ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ2"���?�"�* ����* ��@�� ��"'�$��������2"�"��A

ÑÑÑÑÑÑÑÑÑÑÑÑ

-6�=� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ7���������C�����'"�"#"�����* �

ÑÑÑÑÑÑÑÑÑÑÑÑ

-6�=6 ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ)#��,��#����C���)��9�#��-" �

ÑÑÑÑÑÑÑÑÑÑÑÑ

-6/��/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑB��������#��#

ÑÑÑÑÑÑ-6/��� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ)#���.�"#��'�9����������"���-��#�ÑÑÑÑÑÑÑÑÑÑÑÑ

-6/�� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ.�"#��'�9�����#�����������"��

ÑÑÑÑÑÑÑÑÑÑÑÑ

-6/�/ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ)#���9�#�

ÑÑÑÑÑÑÑÑÑÑÑÑ

-6/�� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ)#���B�����-" �

ÑÑÑÑÑÑÑÑÑÑÑÑ

-6/�> ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑB���2"��

ÑÑÑÑÑÑÑÑÑÑÑÑ

-6��/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

�� ������4�����-" �

ÑÑÑÑÑÑ-6��! ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ)����#���2"�"���%� �ÑÑÑÑÑÑÑÑÑÑÑÑ

-6���ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��#����2"�"���%� �

ÑÑÑÑÑÑÑÑÑÑÑÑ

-6��/ ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ��&�����9�#��-" �

Page 179: Cnc - Jdedwards Xe

8–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Typical Customer Configuration

�����������������#���#������������� �����'"���#"������"���#"��

���"�����'����:��� ���������������#"���

E������ ��'� ��������������#��"�� ��#����������"���#������������

��"* ����� ��#����"���#����*�"�������#��#�����#�#��������#���������

-� ��"���#���#��"�� ��#����������"���#��������������#��� "&� "������'

����������"�"�"G�����'�"��������������"��#"����"#��"��"�"��� ���#"��

#���������+��#�#�������������#�������'��������"'"�����'"���#"����#���

)'��������#�#����#��"G���������'"���#"����������� ����������� ��#��

���"�#"����"#��#���#��"�� ��#������#�#���������.�������" �*����"���"#�

'��������� �#���"'��������#������"���#��������������������������

$�����"�����#����"�#"���"�"���#��#�*������#������"�#"������������#��

���"�����#� "#��'�#�������� ��"���������������#������������#��

���"�����#���������"�����#����"�#"������ ��"��"��#��#���'� ��"��<

� 2�#������

� ��#��#����@�����������#"����#�#�����%2A

� ��#�� ���#"��

� 3���#"���#��#�*�#������ "��#"����" ��:���#�

Page 180: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

8–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Page 181: Cnc - Jdedwards Xe

8–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding the Typical OneWorld Configuration

��"�����#���� ����������#������#��"�� ������ �����'"���#"���'���#��

��&#�#"��J������#"�������#�"��#�������"�������#���"��#�"�����#�����'�

��&#�#"���#����#��"����������"����������#�����#����������"��

@'���:��� �������"���'��#����������������#� "#��A��$ #����������

�������"������� ���"#����#��"�� ����'"���#"�������������������#��

���'"���#"���

-��"�'���#"����*��#���#��"�� ������ �����'"���#"�������#���'� ��"��<

� .���#���"����������"�����#

� .���#���"���#��"�� ���#������

� .���#���"���#������'"���#"����#���� ����

Understanding Your Environments

E������ ������#����#���*�"�����"�����#��'�������� �����'"���#"����-�

��������"�����#��#�"�����#�����"*�<

� ������#������

� ���������

� �����*+��#�����"��

$ ������ �����"�����#��������"���'������������������#���'� ��"��

��#������<

� ��#���5�B!

� �*+��#�3"*�"���5�B!

� ��#���"�#"�����5�B!

Page 182: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

8–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����'� ��"���#�* ������#���"�'���#"���'������� �����"�����#�����

#�* ���������#��������"���#����#��"������� �#'��������.1)F����

�"�����1��� �#'����������#���'"#������#����#���$�,6���� �#'�������

$�,6���#�* �������#��#������������� ��"�����:"#������"#���� ���'#����

Shared Data Sources for UNIX and Windows NT Environments

Production Environment (PD7333)

4���0��� 2�!

0����������������������� ���#� ��*+��#�5�2�!

)������������������������� ?�"���5�2�!

;���������������������� B�"�����#��5�2%��

��� ����������������� ���#� ���* ��5�2����#"��

7���(.�0������������ ����� ��3��� �5�2�! /

/ $'#��#���"�#� �#"�����#����������'"�"���������" ������#���� "��#��#��

���������.���'���#������"�#������#� ���* ����#�������

Conference Room Pilot Environment (PY7333)

4���0��� 2E!

0����������������������� ���#� ��*+��#�5�2E!

)������������������������� ?�"���5�2E!

;���������������������� B�"�����#��5��%2

��� ����������������� ���#� ���* ��5��%2

7���(.�0������������ ����� ��3��� �5�2E! /

/ $'#��#���"�#� �#"�����#����������'"�"���������" ������#���� "��#��#��

���������.���'���#������"�#������#� ���* ����#�������

Test Environment (TS7333)

4���0��� 2E!

0����������������������� ���#� ��*+��#�5�2E!

)������������������������� ?�"���5�2E!

Page 183: Cnc - Jdedwards Xe

Understanding the Typical OneWorld Configuration

8–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

;���������������������� B�"�����#��5�����

��� ����������������� ���#� ���* ��5���#

7���(.�0������������ ���#� ���* ��5���#

Development Environment (DV7333)

4���0��� �?!

0����������������������� ���#� ��*+��#�5��?!

)������������������������� ?�"���5��?!

;���������������������� B�"�����#��5�����

��� ����������������� ���#� ���* ��5���#

7���(.�0������������ ����� ��3��� �5��?! /

/ $'#��#���"�#� �#"�����#����������'"�"���������" ������#���� "��#��#��

���������.���'���#������"�#������#� ���* ����#�������

Pristine Environment (JD7333)

4���0��� ��!

0����������������������� ���#� ��*+��#�5���!

)������������������������� ?�"���5���!

;���������������������� B�"�����#��5����

��� ����������������� B�"�����#��5����

7���(.�0������������ ����� ��3��� �5���!

Planner Environment (JDEPLAN)

4���0��� 23$11�%

0����������������������� 1�#���� "��* �

)������������������������� ����� ��3���

;���������������������� ����� ��2 �����5�B!

��� ����������������� ����� ��2 �����5�B!

7���(.�0������������ ����� ��3���

Page 184: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

8–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Deployment Environment (DEP7333)

4���0��� 23$11�%

0����������������������� 1�#���� "��* �

)������������������������� ?�"���5�2�!

;���������������������� ����� ��3���

��� ����������������� ����� ��3���

7���(.�0������������ ����� ��3��� /

/ E������ ����#��� "��#�����������.���'������#�����#�������

Shared Data Sources for AS/400 Environments

����'� ��"�����#������� "#����������������"�������� ��"�����:"#����

�"#���� ���'#����

Production Environment (PD7333)

4���0��� 2�!

0����������������������� ���#� ��*+��#�5�2�!

)�������������������������$ ?�"���5�2�!

;����������������������$ B�"�����#��5�2%��

��� ����������������� $�,6�����99�1�5�2����#"��

7���(.�0������������ ����� ��3��� �5�2�! �

/ -��#�* ��#��#����#�"��B3�B��������#����#���������&������1�#

��� �#��"������-���:��� ���������������-=� �8/�#��?�"���5�2�! �5

�1�������?�"�����#�����������B�"�����#����#�����������''��#���

� $'#��#���"�#� �#"������������'"�"���������" ������#���� "��#��#���.��

'���#������"�#���$�,6�����99�1���#�����������#��������'���#��

���"�#������#� �#�* ����#�������@���#� ���* ��5�2����#"�������#�

��* ��5��%2���������#� ���* ��5���#A�

Page 185: Cnc - Jdedwards Xe

Understanding the Typical OneWorld Configuration

8–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Conference Room Pilot Environment (PY7333)

4���0��� 2E!

0����������������������� ���#� ��*+��#�5�2E!

)�������������������������$ ?�"���5�2E!

;����������������������$ B�"�����#��5��%2

��� ����������������� $�,6�����99�1�5��%2

7���(.�0������������ ����� ��3��� �5�2E! �

/ -��#�* ��#��#����#�"��B3�B��������#����#���������&������1�#

��� �#��"������-���:��� ���������������-=� �8/�#��?�"���5�2�! �5

�1�������?�"�����#�����������B�"�����#����#�����������''��#���

� $'#��#���"�#� �#"������������'"�"���������" ������#���� "��#��#���.��

'���#������"�#���$�,6�����99�1���#�����������#��������'���#��

���"�#������#� �#�* ����#�������@���#� ���* ��5�2����#"�������#�

��* ��5��%2���������#� ���* ��5���#A�

Test Environment (TS7333)

4���0��� 2E!

0����������������������� ���#� ��*+��#�5�2E!

)�������������������������$ ?�"���5�2E!

;����������������������$ B�"�����#��5�����

��� ����������������� $�,6�����99�1�5���#

7���(.�0������������ ���#� ���* ��5���#

/ -��#�* ��#��#����#�"��B3�B��������#����#���������&������1�#

��� �#��"������-���:��� ���������������-=� �8/�#��?�"���5�2�! �5

�1�������?�"�����#�����������B�"�����#����#�����������''��#���

Development Environment (DV7333)

4���0��� �?!

0����������������������� ���#� ��*+��#�5��?!

)�������������������������$ ?�"���5��?!

;����������������������$ B�"�����#��5�����

Page 186: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

8–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��� ����������������� ���#� ���* ��5���#

7���(.�0������������ ����� ��3��� �5��?! �

/ -��#�* ��#��#����#�"��B3�B��������#����#���������&������1�#

��� �#��"������-���:��� ���������������-=� �8/�#��?�"���5�2�! �5

�1�������?�"�����#�����������B�"�����#����#�����������''��#���

� $'#��#���"�#� �#"������������'"�"���������" ������#���� "��#��#���.��

'���#������"�#���$�,6�����99�1���#�����������#��������'���#��

���"�#������#� �#�* ����#�������@���#� ���* ��5�2����#"�������#�

��* ��5��%2���������#� ���* ��5���#A�

Pristine Environment (JD7333)

4���0��� ��!

0����������������������� ���#� ��*+��#�5���!

)�������������������������$ ?�"���5���!

;����������������������$ B�"�����#��5����

��� ����������������� B�"�����#��5����

7���(.�0������������ ����� ��3��� �5���! �

/ -��#�* ��#��#����#�"��B3�B��������#����#���������&������1�#

��� �#��"������-���:��� ���������������-=� �8/�#��?�"���5�2�! �5

�1�������?�"�����#�����������B�"�����#����#�����������''��#���

� $'#��#���"�#� �#"������������'"�"���������" ������#���� "��#��#�������

����.���'���B�"�����#��5�����#��#�������� ��3��� �5���! ���#�

�����

Planner Environment (JDEPLAN)

4���0��� 23$11�%

0����������������������� 1�#���� "��* �

)�������������������������$ ����� ��3���

;����������������������$ ����� ��2 �����5�B!

��� ����������������� ����� ��2 �����5�B!

7���(.�0������������ ����� ��3��� �

Page 187: Cnc - Jdedwards Xe

Understanding the Typical OneWorld Configuration

8–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

/ -��#�* ��#��#����#�"��B3�B��������#����#���������&������1�#

��� �#��"������-���:��� ���������������-=� �8/�#��?�"���5�2�! �5

�1�������?�"�����#�����������B�"�����#����#�����������''��#���

� E������ ����#��� "��#�����������.���'������#�����#�������

Deployment Environment (DEP7333)

4���0��� 23$11�%

0����������������������� 1�#���� "��* �

)�������������������������$ ?�"���5�2�!

;����������������������$ ����� ��3���

��� ����������������� ����� ��3���

7���(.�0������������ ����� ��3��� �

/ -��#�* ��#��#����#�"��B3�B��������#����#���������&������1�#

��� �#��"������-���:��� ���������������-=� �8/�#��?�"���5�2�! �5

�1�������?�"�����#�����������B�"�����#����#�����������''��#���

� E������ ����#��� "��#�����������.���'������#�����#�������

Remote Environments

%���#�����"�����#�����������������*���� 5�����#�� ���#"�������

'� �����*������'���������� "��#"�����������'���"�����#��"�� �����

-���:��� �<

� 888�2�! <�)��"��#������������ "��#"�������'��#���2�! ���"�����#��#� ���#"���888

� 888���! <�)��"��#�����"�����#��"�� �����'��#�����!

���"�����#��#� ���#"���888

������#�������������#�������'�����#�����"�����#����"���#"�� �#��#���

'��*������"�����#�

The PD7333 Environment

����'� ��"���#�* �� "#�#�����#������������"���#��#�����#��"��������#�

�������"�����#�"����"���#�����&#�#"���"�����#"��<

� 2�! �5��*+��#�9���"���@���5$�,6��A

Page 188: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

8–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� 2�! �5��*+��#�9���"���@$�,6��A

4���0��� 2�!

4����� 2�! �"�#��� "��������#"������"�����#�'���������

��������" ��������#�#�������� ��������&������

#��"�����"����$#����"�"������� "��#�����#��"�� ���

�����'"��������������������#�����#���"�#"������B�#��

��� "��#"����:���#�����#������������#�� ��#�����"��#

*������#�������������#"������"�����#��#�* "����'�

�"''���#�#�����'��"#"*�#�����#��� ��"�������������'

����"���

Page 189: Cnc - Jdedwards Xe

Understanding the Typical OneWorld Configuration

8–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

PD7333 - Object Mappings (non-AS/400)

4�D***�������7���5�� ���A1�(<++%

7���5 ���������

;������������A�48�� ��"�"�#�����'�� #��*+��#�����"������* ��#��#������#����"'"�� �

�������*���#�����#����������#�"���#���������#��"

��'�� #�����"������"�����"���"�� ����#���#�* �<

� -��/>8�5�9��"���*+��#�#����

0�������������A�4�D*** 9���#��#������#� ��*+��#�#�* ��"�� ��"��<

� -=�=8��5�.�����"��

0�������������A�4�������� 9���#��#�����:#����*��#�* ��

��������������A�;D*** 9���#��#�����#���"�#"�����#�* ���$ ������#��#�����#�

�"�#"��������"���*+��#�#�:#�"��#�����#��#��#��<

� 7�=�����5���#���"�#"�����5�7 ����)�'���#"��

��5������������� 9���#��#�������"��������"���*�#������ "��#"���������

����������������A�;D*** 9���#��#����*+��#� "*�"���#�* ���$ ������#��#����*+��#

"*�"������"���*+��#�#�:#�"��#������#��#��#��<

� 7�=�>�$�5��*+��#�3"*�"���7���"����:#��#��#��

� 7�=�>�$�5�B�"���-���#"���1�#�

� 7�=���$�5���#���#��#���1�#��5��#��#�������)#��

� 7�=���B�5���#���#��#���1�#��5��#��#�������)#��

� 7�=��923�5�9��"���*+��#����� �#�

���2�����������A�4�D*** 9���#��#���.����'"���������@.��A����������#��#���

�� "��#���'���#�����#������<����#� ���* ��5�2����#"���

������A�;D*** 9���#��#����#���#�* ��

)��������A�4�D*** 9���#��#�����"���#�* ��"�� ��"��<

� -=� �8/�5�?�"���3"#

� -=� �>�5�2���"�����#"�����:#

Page 190: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

8–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

PD7333 - Object Mappings (AS/400)

4�D***�������7���5�� 1�(<++%

7���5 ���������

1�<++�0�77� �A�4�������� 9���#��#�����:#����*��#�* �����"�����"���"��;�"����� �

'�����:"#��������"�����#�

;������������A�48�� ��"�"�#�����'�� #��*+��#�����"������* ��#��#������#����"'"�� �

�������*���#�����#����������#�"���#���������#��"

��'�� #�����"������"�����"���"�� ����#���'� ��"���#�* �<

� -��/>8�5�9��"���*+��#�#����

;������������A�48���A�� � 9���#��#������1�#���� �#��@�1�A���&' ���$�#"�"#�

����"'"��#"���#�* ��@-=��//A�

0�������������A�4�D*** 9���#��#������#� ��*+��#�#�* ��"�� ��"��<

� -=�=8��5�.�����"��

0�������������A�4�������� 9���#��#�����:#����*��#�* �����"�����"���"��;�"����� �

'��������:"#��������"�����#�

��������������A�;D*** 9���#��#�����#���"�#"�����#�* ���$ ������#��#�����#�

�"�#"��������"���*+��#�#�:#�"��#���'� ��"�����#��#��#��<

� 7�=�����5���#���"�#"�����5�7 ����)�'���#"��

��5������������� 9���#��#�������"��������"���*�#������ "��#"���������

����������������A�;D*** 9���#��#����*+��#� "*�"���#�* ���$ ������#��#����*+��#

"*�"������"���*+��#�#�:#�"��#���'� ��"�����#��#��#��<

� 7�=�>�$�5��*+��#�3"*�"���7���"����:#��#��#��

� 7�=�>�$�5�B�"���-���#"���1�#�

� 7�=���$�5���#���#��#���1�#��5��#��#�������)#��

� 7�=���B�5���#���#��#���1�#��5��#��#�������)#��

� 7�=��923�5�9��"���*+��#����� �#�

���2�����������A�4�D*** 9���#��#���.����'"���������@.��A����������#��#���

�� "��#�����'� ��<

� .���5����:"#������%�� "��#���'���$�6�����99�1�5

2����#"��

� .���5�1�����:"#������%�� "��#���'������#� ���* ��5

2����#"��

� 9�����%�� "��#���'������#� ���* ��5�2����#"��

Page 191: Cnc - Jdedwards Xe

Understanding the Typical OneWorld Configuration

8–13OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

7���5 ���������

������A�;D*** 9���#��#����#���#�* ��"��#����� ���'#�������"#�� "*���

������A�;D***�A�� � 9���#��#������1�#���� �#��@�1�A��#���#�* ��"�� ��"��<

� -=��%2�1�5���#��%�� "��#"���2���"���������

1�#"'"��#"��

� -=��%3�7�5���#��%�� "��#"����������3��

� -=�������5������ ������"#�

)��������A�4�D*** 9���#��#�����"���#�* ��"�� ��"��N

� -=� �>�5�2���"�����#"�����:#

)��������A�4�D***�A�� � 9���#��#������1�#���� �#��@�1�A���"���#�* ��"�� ��"��<

� -=� �8/�5�?�"���3"#

Page 192: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

8–14 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

The TS7333 Environment

����'� ��"���#�* �� "#�#�����#������������"���#��#�����#��"��������#�

�������"�����#�"����"���#�����&#�#"���"�����#"��<

� ��! �5��*+��#�9���"���@���5$�,6��A

� ��! �5��*+��#�9���"���@$�,6��A

4���0��� 2E!

4����� E����������#�����! ����"�����#�#��#�#<

� �����'#������"��������'�����������" �#

@�%2A

� 9��"'"��#"������������"��#������� �����#���#�

���������#��'����#��2E! ��*�#��������#���#

#��'����#�����������#"�����#�����������

#���'�����������#�*����� �����#��������

E�������� ��#�#������"���"��#�"����"�����#

@�����#"���'��"���#�* ��"�#�������������#�* �A��)'����

�����#��"G���#�����#���#�#����"�����#�����������'� �

���������#��������"���#��#��" ������*�����"���#�

�����#"����E�������� ��������#�#�"�"���� ���"��#�"

���"�����#�

��#������� "��#"���#�#"������������"���#�#"��

���� �#��#�"����"�����#��$'#���������#���)�#� �#"��

��&*���������*�"�����#���:"#���#" �������#��"#����

����#"���*�"�@���������#� ����;��#� �A��������� �

�'���#�"����"�����#�'���2�! ����"��������#

���������#"�����#��

)��#�"����"�����#��#������������.��������#

�� "��#���

Page 193: Cnc - Jdedwards Xe

Understanding the Typical OneWorld Configuration

8–15OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

TS7333 - Object Mappings (non-AS/400)

��D***�������7���5�� ���A1�(<++%

7���5 ���������

;������������A���� ��"�"�#�����'�� #��*+��#�����"������* ��#��#������#����"'"�� �

�������*���#�����#��������" ����#�"���#���������#��"

��'�� #�����"������"�����"���"�� ����#���'� ��"���#�* �<

� -��/>8�5�9��"���*+��#�#����

0�������������A�4CD*** 9���#��#������#� ��*+��#�#�* ��"�� ��"��<

� -=�=8��5�.�����"��

0�������������A���� 9���#��#�����:#����*��#�* ���.����'"���������@.��A����

�����

��������������A�;D*** 9���#��#�����#���"�#"�����#�* ���$ ������#��#�����#�

�"�#"��������"���*+��#�#�:#�"��#���'� ��"�����#��#��#��<

� 7�=�����5���#���"�#"�����5�7 ����)�'���#"��

��5������������� 9���#��#�������"��������"���*�#������ "��#"���������

����������������A�;D*** 9���#��#����*+��#� "*�"���#�* ���$ ������#��#����*+��#

"*�"������"���*+��#�#�:#�"��#���'� ��"�����#��#��#��<

� 7�=�>�$�5��*+��#�3"*�"���7���"����:#��#��#��

� 7�=�>�$�5�B�"���-���#"���1�#�

� 7�=���$�5���#���#��#���1�#��5��#��#�������)#��

� 7�=���B�5���#���#��#���1�#��5��#��#�������)#��

� 7�=��923�5�9��"���*+��#����� �#�

������A�;D*** 9���#��#����#���#�* ��

)��������A�4CD*** 9���#��#�����"���#�* ��"�� ��"��<

� -=� �8/�5�?�"���3"#

� -=� �>�5�2���"�����#"�����:#

Page 194: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

8–16 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

TS7333 - Object Mappings (AS/400)

��D***�������7���5�� 1�(<++%

7���5 ���������

1�<++�0�77� �A���� 9���#��#�����:#����*��#�* �����������'"���������@.��A

#�* �����"�����"���"��;�"����� ��'�����:"#����

���"�����#�

;������������A���� ��"�"�#�����'�� #��*+��#�����"������* ��#��#������#����"'"�� �

�������*���#�����#��������" ����#�"���#���������#��"

��'�� #�����"������"�����"���"�� ����#���'� ��"���#�* �<

� -��/>8�5�9��"���*+��#�#����

;������������A�����A�� � 9���#��#������1�#���� �#��@�1�A���&' ���$�#"�"#�

����"'"��#"���#�* ��@-=��//A�

0�������������A�4CD*** 9���#��#������#� ��*+��#�#�* ��"�� ��"��<

� -=�=8��5�.�����"��

0�������������A���� -�����:"#����������#��#��������#�* ��

-��������:"#����������#����:#����*��#�* ��������#�* ��

����#��������'"���������@.��A�#�* ��

��������������A�;D*** 9���#��#�����#���"�#"�����#�* ���$ ������#��#�����#�

�"�#"��������"���*+��#�#�:#�"��#���'� ��"�����#��#��#��<

� 7�=�����5���#���"�#"�����5�7 ����)�'���#"��

��5������������� 9���#��#�������"��������"���*�#������ "��#"���������

����������������A�;D*** 9���#��#����*+��#� "*�"���#�* ���$ ������#��#����*+��#

"*�"������"���*+��#�#�:#�"��#���'� ��"�����#��#��#��<

� 7�=�>�$�5��*+��#�3"*�"���7���"����:#��#��#��

� 7�=�>�$�5�B�"���-���#"���1�#�

� 7�=���$�5���#���#��#���1�#��5��#��#�������)#��

� 7�=���B�5���#���#��#���1�#��5��#��#�������)#��

� 7�=��923�5�9��"���*+��#����� �#�

������A�;D*** 9���#��#����#���#�* ��"��#����� ���'#�������"#�� "*���

������A�;D***�A�� � 9���#��#������1�#���� �#��@�1�A��#���#�* ��"�� ��"��<

� -=��%2�1�5���#��%�� "��#"���2���"���������

1�#"'"��#"��

� -=��%3�7�5���#��%�� "��#"����������3��

� -=�������5������ ������"#�

)��������A�4CD*** 9���#��#�����"���#�* ��"�� ��"��<

� -=� �>�5�2���"�����#"�����:#

Page 195: Cnc - Jdedwards Xe

Understanding the Typical OneWorld Configuration

8–17OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

7���5 ���������

)��������A�4CD***�A�� � 9���#��#������1�#���� �#��@�1�A���"���#�* ��"�� ��"��<

� -=� �8/�5�?�"���3"#

The PY7333 Environment

����'� ��"���#�* �� "#�#�����#������������"���#��#�����#��"��������#�

�������"�����#�"����"���#�����&#�#"���"�����#"��<

� 2E! �5��*+��#�9���"���@���5$�,6��A

� 2E! �5��*+��#�9���"���@$�,6��A

4���0��� 2E!

4����� �������'������%����2" �#�@�%2A����"�����#��2E! �

"�#���#��"������"�����#�'�������#"�������#��#

#�* ��������#��#�* ��@�����������������#��#��'"��

��#����##��������"#�����#�A�������� �#����"#�

��#������#����"���#����%2������

E��������#���#�* ��#��#��������#"������"�����#�*�'��

������� "����$'#���������#���)�#� �#"�����&*��������

*�"�����#���:"#���#" �������#��"#������������"�#��

������� ���'���#���#�#���#��'���2�! ����"��

�����#����������#"�����#��

Page 196: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

8–18 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

PY7333 - Object Mappings (non-AS/400)

4CD***�������7���5�� ���A1�(<++%

7���5 ���������

;������������A�084 ��"�"�#�����'�� #��*+��#�����"������* ��#��#������#����"'"�� �

�������*���#�����#��������" ����#�"���#���������#��"

��'�� #�����"������"�����"���"�� ����#���'� ��"���#�* �<

� -��/>8�5�9��"���*+��#�#����

0�������������A�4CD*** 9���#��#������#� ��*+��#�#�* ���"�� ��"��<

� -=�=8��5�.�����"��

0�������������A�084 9���#��#�����:#����*��#�* ��

��������������A�;D*** 9���#��#�����#���"�#"�����#�* ���$ ������#��#�����#�

�"�#"��������"���*+��#�#�:#�"��#���'� ��"�����#��#��#��<

� 7�=�����5���#���"�#"�����5�7 ����)�'���#"��

��5������������� 9���#��#�������"��������"���*�#������ "��#"���������

����������������A�;D*** 9���#��#����*+��#� "*�"���#�* ���$ ������#��#����*+��#

"*�"������"���*+��#�#�:#�"��#�����#��#��#��<

� 7�=�>�$�5��*+��#�3"*�"���7���"����:#��#��#��

� 7�=�>�$�5�B�"���-���#"���1�#�

� 7�=���$�5���#���#��#���1�#��5��#��#�������)#��

� 7�=���B�5���#���#��#���1�#��5��#��#�������)#��

� 7�=��923�5�9��"���*+��#����� �#�

���2�����������A�4CD*** 9���#��#���.����'"���������@.��A����������#��#���

�� "��#���'���#�����#������<����#� ���* ��5��%2�

������A�;D*** 9���#��#����#���#�* ��

)��������A�4CD*** 9���#��#�����"���#�* ��"�� ��"��<

� -=� �8/�5�?�"���3"#

� -=� �>�5�2���"�����#"�����:#

Page 197: Cnc - Jdedwards Xe

Understanding the Typical OneWorld Configuration

8–19OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

PY7333 - Object Mappings (AS/400)

4CD***�������7���5�� 1�(<++%

7���5 ���������

1�<++�0�77� �A�084 9���#��#�����:#����*��#�* �����"�����"���"��;�"����� �

'�����:"#��������"�����#�

;������������A�084 ��"�"�#�����'�� #��*+��#�����"������* ��#��#������#����"'"�� �

�������*���#�����#��������" ����#�"���#���������#��"

��'�� #�����"������"�����"���"�� ����#���'� ��"���#�* �<

� -��/>8�5�9��"���*+��#�#����

;������������A�084�A�� � 9���#��#������1�#���� �#��@�1�A���&' ���$�#"�"#�

����"'"��#"���#�* ��@-=��//A�

0�������������A�4CD*** 9���#��#������#� ��*+��#�#�* ���"�� ��"��<

� -=�=8��5�.�����"��

0�������������A�084 9���#��#�����:#����*��#�* �����"�����"���"��;�"����� �

'��������:"#��������"�����#�

��������������A�;D*** 9���#��#�����#���"�#"�����#�* ���$ ������#��#�����#�

�"�#"��������"���*+��#�#�:#�"�� ��"���#�����#��#��#��<

� 7�=�����5���#���"�#"�����5�7 ����)�'���#"��

��5������������� 9���#��#�������"��������"���*�#������ "��#"���������

����������������A�;D*** 9���#��#����*+��#� "*�"���#�* ���$ ������#��#����*+��#

"*�"������"���*+��#�#�:#�"��#�����#��#��#��<

� 7�=�>�$�5��*+��#�3"*�"���7���"����:#��#��#��

� 7�=�>�$�5�B�"���-���#"���1�#�

� 7�=���$�5���#���#��#���1�#��5��#��#�������)#��

� 7�=���B�5���#���#��#���1�#��5��#��#�������)#��

� 7�=��923�5�9��"���*+��#����� �#�

���2�����������A�4CD*** 9���#��#���.����'"���������@.��A����������#��#���

�� "��#�����'� ��<

� .���5����:"#������%�� "��#���'���$�6�����99�1�5

�%2

� .���5�1�����:"#������%�� "��#���'������#� ���* ��5

�%2

� 9�����%�� "��#���'������#� ���* ��5��%2

������A�;D*** 9���#��#����#���#�* ��"��#����� ���'#�������"#�� "*���

Page 198: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

8–20 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

7���5 ���������

������A�;D***�A�� � 9���#��#������1�#���� �#��@�1�A��#���#�* ��"�� ��"��<

� -=��%2�1�5���#��%�� "��#"���2���"���������

1�#"'"��#"��

� -=��%3�7�5���#��%�� "��#"����������3��

� -=�������5������ ������"#�

)��������A�4CD*** 9���#��#�����"���#�* ��"�� ��"��<

� -=� �>�5�2���"�����#"�����:#

)��������A�4CD***�A�� � 9���#��#������1�#���� �#��@�1�A���"���#�* ��"�� ��"��<

� -=� �8/�5�?�"���3"#

The DV7333 Environment

)'����������#����� ��"�����#������"'"��#"�������������#������#�"

���"�����#�

����'� ��"���#�* �� "#�#�����#������������"���#��#�����#��"��������#�

�������"�����#�"����"���#�����&#�#"���"�����#"��<

� �?! �5��*+��#�9���"���@���5$�,6��A

� �?! �5��*+��#�9���"���@$�,6��A

4���0��� �?!

4����� �������� �����#����"�����#�@�?! A�"�#���#�#"��

���"�����#�'������ �����#��*+��#����"����"�����#

����#���#�#���#��#��#���! ��������� ����"��

��#��#�"����"�����#�#�����"'���*+��#�����#�#�*�'��

#��'�"������������*+��#�#��#���2�! ���#�������

��������������#��'�����*+��#�"�#��2�! ���������

"�#� �������#�2%�����&����#��#������#�*����� �����#�

�����������"�����#���"#����%2�������'�����"#"���

#�#"���

Page 199: Cnc - Jdedwards Xe

Understanding the Typical OneWorld Configuration

8–21OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

DV7333 - Object Mappings (non-AS/400)

�)D***�������7���5�� ���A1�(<++%

7���5 ���������

;������������A���� ��"�"�#�����'�� #��*+��#�����"������* ��#��#������#����"'"�� �

�������*���#�����#��������" ����#�"���#���������#��"

��'�� #�����"������"�����"���"�� ����#���'� ��"���#�* �<

� -��/>8�5�9��"���*+��#�#����

0�������������A��)D*** 9���#��#������#� ��*+��#�#�* ��"�� ��"��<

� -=�=8��5�.�����"��

0�������������A���� 9���#��#�����:#����*��#�* ��

��������������A�;D*** 9���#��#�����#���"�#"�����#�* ���$ ������#��#�����#�

�"�#"��������"���*+��#�#�:#�"�� ��"���#���'� ��"�����#�

#��#��<

� 7�=�����5���#���"�#"�����5�7 ����)�'���#"��

��5������������� 9���#��#�������"��������"���*�#������ "��#"���������

����������������A�;D*** 9���#��#����*+��#� "*�"���#�* ���$ ������#��#����*+��#

"*�"������"���*+��#�#�:#�"��#�����#��#��#��<

� 7�=�>�$�5��*+��#�3"*�"���7���"����:#��#��#��

� 7�=�>�$�5�B�"���-���#"���1�#�

� 7�=���$�5���#���#��#���1�#��5��#��#�������)#��

� 7�=���B�5���#���#��#���1�#��5��#��#�������)#��

� 7�=��923�5�9��"���*+��#����� �#�

���2�����������A��)D*** 9���#��#���.����'"���������@.��A����������#��#���

�� "��#���'���#�����#������<����#� ���* ��5���#�

������A�;D*** 9���#��#����#���#�* ��

)��������A��)D*** 9���#��#�����"���#�* ��"�� ��"��<

� -=� �8/�5�?�"���3"#

� -=� �>�5�2���"�����#"�����:#

Page 200: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

8–22 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

DV7333 - Object Mappings (AS/400)

�)D***�������7���5�� 1�(<++%

7���5 ���������

1�(<++�0�77� �A���� 9���#��#�����:#����*��#�* �����"�����"���"��;�"����� �

'�����:"#��������"�����#�

;������������A���� ��"�"�#�����'�� #��*+��#�����"������* ��#��#������#����"'"�� �

�������*���#�����#��������" ����#�"���#���������#��"

��'�� #�����"������"�����"���"�� ����#���#�* �<

� -��/>8�5�9��"���*+��#�#����

;������������A�084�A�� � 9���#��#������1�#���� �#��@�1�A���&' ���$�#"�"#�

����"'"��#"���#�* ��@-=��//A�

0�������������A��)D*** 9���#��#������#� ��*+��#�#�* ��"�� ��"��<

� -=�=8��5�.�����"��

0�������������A���� 9���#��#�����:#����*��#�* �����"�����"���"��;�"����� �

'��������:"#��������"�����#�

��������������A�;D*** 9���#��#�����#���"�#"�����#�* ���$ ������#��#�����#�

�"�#"��������"���*+��#�#�:#�"�� ��"���#�����#��#��#��<

� 7�=�����5���#���"�#"�����5�7 ����)�'���#"��

��5������������� 9���#��#�������"��������"���*�#������ "��#"���������

����������������A�;D*** 9���#��#����*+��#� "*�"���#�* ���$ ������#��#����*+��#

"*�"������"���*+��#�#�:#�"��#�����#��#��#��<

� 7�=�>�$�5��*+��#�3"*�"���7���"����:#��#��#��

� 7�=�>�$�5�B�"���-���#"���1�#�

� 7�=���$�5���#���#��#���1�#��5��#��#�������)#��

� 7�=���B�5���#���#��#���1�#��5��#��#�������)#��

� 7�=��923�5�9��"���*+��#����� �#�

���2�����������A��)D*** 9���#��#���.����'"���������@.��A����������#��#���

�� "��#�����'� ��<

� .���5����:"#������%�� "��#���'���$�6�����99�1�5

��#

� .���5�1�����:"#������%�� "��#���'������#� ���* ��5

��#

� 9�����%�� "��#���'������#� ���* ��5���#

������A�;D*** 9���#��#����#���#�* ��"��#����� ���'#�������"#�� "*���

Page 201: Cnc - Jdedwards Xe

Understanding the Typical OneWorld Configuration

8–23OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

7���5 ���������

������A�;D***�A�� � 9���#��#������1�#���� �#��@�1�A��#���#�* ��"�� ��"��N

� -=��%2�1�5���#��%�� "��#"���2���"���������

1�#"'"��#"��

� -=��%3�7�5���#��%�� "��#"����������3��

� -=�������5������ ������"#�

)��������A��)D*** 9���#��#�����"���#�* ��"�� ��"��<

� -=� �>�5�2���"�����#"�����:#

)��������A��)D***�A�� � 9���#��#������1�#���� �#����"���#�* ��"�� ��"��<

� -=� �8/�5�?�"���3"#

The JD7333 Environment

����'� ��"���#�* �� "#�#�����#������������"���#��#�����#��"��������#�

�������"�����#�"����"���#�����&#�#"���"�����#"��<

� ��! �5��*+��#�9���"���@���5$�,6��A

� ��! �5��*+��#�9���"���@$�,6��A

4���0��� ��!

4����� E����������#�����! ����"�����#�#��#�#�����������

�"#"���@��� #���A��*+��#��"#������������

�����#�#"�����#���E�������� �����#�"����"�����#�'�

#�"�"���� ����E�����#������#�"����"�����#�#�

����������"'"����*+��#�#���"#"����*+��#�

���������������#�����'#������* ���#��#�����

�������� ��"�����#���������#������#���� "��#��

#�����" ��&�����#��"������#��#����"#"������"�����#�#�

��� "��#��#�����* �����������#"���*�"�@�����

���#� ����;��#� �A��������� ���'���#�������

��������#��#�"����"�����#�����"#��#�������������

�����#�#"�����#���"������"#��#����'#����

Page 202: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

8–24 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

JD7333 - Object Mappings (non-AS/400)

=�D***�������7���5�� ���A1�(<++%

7���5 ���������

;������������A�=�� ��"�"�#�����'�� #��*+��#�����"������* ��#��#������#����"'"�� �

�������*���#�����#��������" ����#�"���#���������#��"

��'�� #�����"������"�����"���"�� ����#���'� ��"���#�* �<

� -��/>8�5�9��"���*+��#�#����

��������������A�;D*** 9���#��#�����#���"�#"�����#�* ���$ ������#��#�����#�

�"�#"��������"���*+��#�#�:#�"�� ��"���#���'� ��"�����#�

#��#��<

� 7�=�����5���#���"�#"�����5�7 ����)�'���#"��

��5������������� 9���#��#�������"��������"���*�#������ "��#"���������

����������������A�;D*** 9���#��#����*+��#� "*�"���#�* ���$ ������#��#����*+��#

"*�"������"���*+��#�#�:#�"��#���'� ��"�����#��#��#��<

� 7�=�>�$�5��*+��#�3"*�"���7���"����:#��#��#��

� 7�=�>�$�5�B�"���-���#"���1�#�

� 7�=���$�5���#���#��#���1�#��5��#��#�������)#��

� 7�=���B�5���#���#��#���1�#��5��#��#�������)#��

� 7�=��923�5�9��"���*+��#����� �#�

���2�����������A�=�D*** 9���#��#���.����'"���������@.��A����������#��#���

�� "��#���'���#���'� ��"�����#������<

� B�"�����#��5����

������A�;D*** 9���#��#����#���#�* ��

)��������A�=�D*** 9���#��#�����"���#�* ��"�� ��"��<

� -=� �8/�5�?�"���3"#

� -=� �>�5�2���"�����#"�����:#

JD7333 - Object Mappings (AS/400)

=�D***�������7���5�� 1�(<++%

7���5 ���������

;������������A�=�� ��"�"�#�����'�� #��*+��#�����"������* ��#��#������#����"'"�� �

�������*���#�����#����������#�"���#���������#��"

��'�� #�����"������"�����"���"�� ����#���'� ��"���#�* �<

� -��/>8�5�9��"���*+��#�#����

Page 203: Cnc - Jdedwards Xe

Understanding the Typical OneWorld Configuration

8–25OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

7���5 ���������

;������������A�=���A�� � 9���#��#������1�#���� �#��@�1�A���&' ���$�#"�"#�

����"'"��#"���#�* ��@-=��//A�

0�������������A�4�D*** 9���#��#������#� ��*+��#�#�* ���"�� ��"��<

� -=�=8��5�.�����"��

��������������A�;D*** 9���#��#�����#���"�#"�����#�* ���$ ������#��#�����#�

�"�#"��������"���*+��#�#�:#�"�� ��"���#���'� ��"�����#�

#��#��<

� 7�=�����5���#���"�#"�����5�7 ����)�'���#"��

���������������� 9���#��#�������"��������"���*�#������ "��#"���������

����������������A�;D*** 9���#��#����*+��#� "*�"���#�* ���$ ������#��#����*+��#

"*�"������"���*+��#�#�:#�"��#���'� ��"�����#��#��#��<

� 7�=�>�$�5��*+��#�3"*�"���7���"����:#��#��#��

� 7�=�>�$�5�B�"���-���#"���1�#�

� 7�=���$�5���#���#��#���1�#��5��#��#�������)#��

� 7�=���B�5���#���#��#���1�#��5��#��#�������)#��

� 7�=��923�5�9��"���*+��#����� �#�

���2�����������A�=�D*** 9���#��#���.����'"���������@.��A����������#��#���

�� "��#�����'� ��<

� .��<�%�� "��#���'���B�"�����#��5����

� 9���<�%�� "��#���'���B�"�����#��5����

������A�;D*** 9���#��#����#���#�* ��"��#����� ���'#�������"#�� "*���

������A�;D***�A�� � 9���#��#������1�#���� �#��@�1�A��#���#�* ��"�� ��"��<

� -=��%2�1�5���#��%�� "��#"���2���"���������

1�#"'"��#"��

� -=��%3�7�5���#��%�� "��#"����������3��

� -=�������5������ ������"#�

)��������A�=�D*** 9���#��#�����"���#�* ��"�� ��"��<

� -=� �>�5�2���"�����#"�����:#

)��������A�=�D***�A�� � 9���#��#������1�#���� �#����"���#�* ��"�� ��"��<

� -=� �8/�5�?�"���3"#

Page 204: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

8–26 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

What You Should Know About

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

��6��������������

��������������5�

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

��! ������?! ��������#��'����#� �#�* ���2"#"��

���"#������#��'����#� �#�* ��#��#����"�� �����"�

B�"�����#��5�����

E��������#��������#� ��*+��#�#�������*+��#

���'"���#"���9������*�������������� ��#����#�����

�*+��#�2�#��9�#���$ ����"�����#�@���� ���'���#�

����A�����#��������*+��#�3"*�"���#�* ��

Understanding Typical Data Sources

)'�#�����#��"������������ ���������9"���'#��H3����������"������

����'� �����"���#����#������ �����#������'����'����������������

���������������#��#�������#�� ���#�������@�:���#������ ��3��� A���

#�����#��"������"�#�����'�#������ �����#�����

����#��� ����� �� �� ������������������������#��� ����� ���97�������������������������'��"�'���#"����*��#�#���"�#�����"����"����������#�

�������� ���"���

��#���������� "#��������"���#����#��"��������#������#���<

����'� ��"�����#����������������������"���#��#�����#��"��������#�

�������"�����#�"����"���#�����&#�#"���"�����#"��<

� .���#���"������5$�,6�����#�������

� .���#���"���$�,6�����#�������

.� ���#���"��#�#����#�����#�*��������'��#�����#�������"�#���'� ��"��<

�������6��������������

���6��

����������#�#"���'��#�����#�*���

�������6�������

7���������'�����6��

������#�������������-���:��� ���'����#������

B�"�����#��5�2%����#�����#�*����������� ��� ��*�

B�"�����#��5�2%���

�������1�(<++ ������#�������������-���:��� ���'����#������

?�"���5�2�! �5��1���#�����#�*����������� ��� �

*��?�"���52�! �5��1��

Page 205: Cnc - Jdedwards Xe

Understanding the Typical OneWorld Configuration

8–27OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding Non-AS/400 Data Sources

����'� ��"�������#�����#������������'� �����*��#������������#��

�����<

.����������5� ��A1�(<++������������

����������� ��� ����������4�����

B�"�����#��5��%2 ���������"��%2��$�

��"�"�#����%2�*�"�����#���B�'�����"��� "����������� �����������

�'�#�"���#��#��B�"�����#��5�2%���

B�"�����#��5���� ���������"�2%)����$�

��"�"�#����"#"�����#���"������"#������� ��

B�"�����#��5�2%�� ���������"�2%����$�

��"�"�#��������#"���*�"�����#��

B�"�����#��5����� ���������"�������$�

��"�"�#���#�#���#����#������"����%2���#��#�"������#���'��

���5������������#���

���#� ��*+��#�5�2E! ���������"�2E! �

��"�"�#������#� ��*+��#���#����������"�#����"#��#���2E! ���#�

������$'#��������&������#�#�#������"'"��#"���"��#�"���#�������

#��'��#����#��#���2�! ���#�������

���#� ��*+��#�5��?! ���������"��?! �

��"�"�#������#� ��*+��#���#����������"�#����"#��#����?! ���#�

������$'#��������&������#�#�#������"'"��#"���"��#�"���#�������

#��'��#����#��#���2�! ���#�������

���#� ��*+��#�5���! ���������"���! �

��"�"�#������#� ��*+��#���#����������"�#����"#��#�����! ���#�

�����

Page 206: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

8–28 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����������� ��� ����������4�����

���#� ��*+��#�5�2�! ���������"�2�! �

��"�"�#������#� ��*+��#���#�������#��#������"#��#���2�! ���#�

���������'���*+��#�"�#��#�"���#��������'#�����������#�#���#����"�

��#��������?! �

���#� ���* ��5��%2 ���������"��%2��3�

��������#������#� �#�* ������"��#����%2����"�����#�

���#� ���* ��5�2�� ���������"�2%����3�

��������#������#� �#�* ������"��#��������#"������"�����#�

���#� ���* ��5���# ���������"�������3�

��������#������#� �#�* ������"��#���#�#����"�����#�

��#���"�#"�����5�B! ���������"���! �

��"�"�#���������#���"�#"�����#��#�� ����"�����#����

3��$3 �����"���������

��"���#���������'"���#��� ��� �����"���#������� ���.��"#�#�

���"������#�#��#�����&#�#"���

��#������� ���������"��?9! �

��"���'"���#��� ��"����#�#������� ��

��#��������5�����

9��

���������"��?9! �

��"�"�#�����������'��#��� ��"������

�*+��#�3"*�"���5�B! ���������"��B�! �

��"�"�#����*+��#�3"*�"������"���"������ ��� �������"'"��

����� ��3��� �����"���������

��"�"��� "��#�����#��'�����"��#������B!�9"���'#�$������#�*���

��"�"������� ��"��#���� �����

Page 207: Cnc - Jdedwards Xe

Understanding the Typical OneWorld Configuration

8–29OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����������� ��� ����������4�����

����� ��3��� �5�2E! �����"���������

��"����#�"��#���.����'"���������@.��A����������#��#���

�� "��#���'���#�����#������<����#� ���* ��5��%2�

����� ��3��� �5��?! �����"���������

��"����#�"��#���.����'"���������@.��A����������#��#���

�� "��#���'���#�����#������<����#� ���* ��5���#�

����� ��3��� �5���! �����"���������

��"����#�"��#���.����'"���������@.��A����������#��#���

�� "��#���'���#�����#������<�B�"�����#��5�����

����� ��3��� �5�2�! �����"���������

��"����#�"��#���.����'"���������@.��A����������#��#���

�� "��#���'���#�����#������<����#� ���* ��5�2����#"���

��#���5�B! ���������"��E�! �

��"�"�#��������#��'��#���#�* ��#��#�� ����"�����#����

?�"���5�2E! ���������"���! �

��"����#�"��#�����"��� "#���������"�����#"���#�:#�#�* ��'��#��

2E! ����"�����#�

?�"���5��?! ���������"��?! �

��"����#�"��#�����"��� "#���������"�����#"���#�:#�#�* ��'��#��

�?! ����"�����#�

?�"���5���! ���������"���! �

��"����#�"��#�����"��� "#���������"�����#"���#�:#�#�* ��'��#��

��! ����"�����#�

?�"���5�2�! ���������"�2�! �

��"����#�"��#�����"��� "#���������"�����#"���#�:#�#�* ��'��#��

2�! ����"�����#�

Page 208: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

8–30 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding AS/400 Data Sources

����'� ��"�������#�����#������������'� �����*��#������������#��

�����<

.����������5�1�(<++������������

����������� ��� ����������4�����

$�,6�����99�1�5��%2 ������'�� #� "*���"��%2��9�

��"�"�#���������� "*���'�������'"�������������*��#���2E!

���"�����#����"�����"����� ����� "��#�����:"#��������"�����#�

$�,6�����99�1�5

2����#"��

������'�� #� "*���"��3���9�

��"�"�#���������� "*���'�������'"�������������*��#��

2����#"������"�����#����"�����"����� ����� "��#�����:"#����

���"�����#�

$�,6�����99�1�5���# ������'�� #� "*���"�������9�

��"�"�#���������� "*���'�������'"������������"�����������*�

�����#"��������%2����"�����"����� ����� "��#�����:"#����

���"�����#�

B�"�����#��5��%2 ������'�� #� "*���"��%2��$�

��"�"�#����%2�*�"�����#���B�'�����"��� "����������� �����������

�'�#�"���#��#��B�"�����#��5�2%���

B�"�����#��5�2%�� ������'�� #� "*���"�2%����$�

��"�"�#��������#"���*�"�����#��

B�"�����#��5����� ������'�� #� "*���"�������$�

��"�"�#���#�#���#����#������"����%2���#��#�"������#���'��

���5������������#���

B�"�����#��5���� ������'�� #� "*���"�2%)����$�

��"�"�#����"#"�����#���"������"#������� �����"���#�*���"�� ���

� ���� "��#"�����#������� �����:#����*��������'"�������������

�����

Page 209: Cnc - Jdedwards Xe

Understanding the Typical OneWorld Configuration

8–31OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����������� ��� ����������4�����

���#� ��*+��#�5�2E! ���������"�2E! �

��"�"�#������#� ��*+��#���#����������"�#����"#��#���2E! ���#�

������$'#��������&������#�#�#������"'"��#"���"��#�"���#�������

#��'��#����#��#���2�! ���#�������

���#� ��*+��#�5��?! ���������"��?! �

��"�"�#������#� ��*+��#���#����������"�#����"#��#����?! ���#�

������$'#��������&������#�#�#������"'"��#"���"��#�"���#�������

#��'��#����#��#���2�! ���#�������

���#� ��*+��#�5���! ���������"���! �

��"�"�#������#� ��*+��#���#����������"�#����"#��#�����! ���#�

�����

���#� ��*+��#�5�2�! ���������"�2�! �

��"�"�#������#� ��*+��#���#����������"�#����"#��#���2�! ���#�

���������'���*+��#�"�#��#�"���#��������'#�����������#�#���#����"�

��#��������?! �

���#� ���* ��5�2�� ������'�� #� "*���"�2%����3

��"�"�#�����#��������'������ ��������$ #�����������#�* ��� �

�:"#�"���� ���'#�����'��#�"�� �����'������ ��#���������#�*�

�����*�#������� ���'#������������� ��

���#� ���* ��5���# ������'�� #� "*���"�������3�

��������#������#� �#�* ������"��#���#�#����"�����#�

��#���"�#"�����5�B! ������'�� #� "*���"���! �

��"�"�#���������#���"�#"�����#��#�� ����"�����#����

3��$3 �����"���� "*���

��"���'"���#��� ��� �����"���#������� ��������������"#�#�����"��

���#�#��#�����&#�#"���

��#������� ������'�� #� "*���"�B! ��3�

��"���"�#�#��#�������� �� ��"��������"���"���'"����*��#��

��"�* ����#��������

Page 210: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

8–32 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����������� ��� ����������4�����

��#��������5�����

9��

������'�� #� "*���"�B! ��3�

��"���"�#�#��#�����������#�* �����#�������� �� ��"�����

��"���"���'"����*��#�����"�* ����#��������

�*+��#�3"*�"���5�B! ������'�� #� "*���"��3! �

��"�"�#����*+��#�3"*�"������"���"������ ��� �������"'"��

����� ��3��� �����"���� "*���

��"���"�#�#���� "��#�����#��'�����"��#������B!�9"���'#�$���

��#�*���

��#���5�B! ������'�� #� "*���"��E�! ���#����:"#"����� ���'#�������"#�

"*���

��"���"�#�#��#��������#��'��#���#�* ����:���#�'��#������1�#

��� �#��@�1�A�#�* ��#��#�� ����"�����#����

��#���5�B! �5��1� ������'�� #� "*���"��E�! ���#����:"#"����� ���'#�������"#�

"*���

��"���"�#�#��#������1�#���� �#��@�1�A��#���#�* ��"�� ��"���#��

��#��%�� "��#"���2���"����������1�#"'"��#"���@-=��%2�1A����#�

%�� "��#"����������3���@-=��%3�7A����������� ������"#�

@-=������A�#�* ��

?�"���5�2E! ������'�� #� "*���"�2E! �1��

��"���"�#�#��#�������"�����#"���#�:#�#�* ��@-=� �>A�

?�"���5�2E! �5��1� ������'�� #� "*���"�2E! �1��

��"���"�#�#��#�����"��� "#�#�* ��@-=� �8/A�#��#����#�"��B3�B�#��#

�����#�*��#�� �#���

?�"���5��?! ������'�� #� "*���"��?! �1��

��"���"�#�#��#�������"�����#"���#�:#�#�* ��@-=� �>A�

?�"���5��?! �5��1� ������'�� #� "*���"��?! �1��

��"���"�#�#��#�����"��� "#�#�* ��@-=� �8/A�#��#����#�"��B3�B�#��#

�����#�*��#�� �#���

Page 211: Cnc - Jdedwards Xe

Understanding the Typical OneWorld Configuration

8–33OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����������� ��� ����������4�����

?�"���5���! ������'�� #� "*���"���! �1��

��"���"�#�#��#�������"�����#"���#�:#�#�* ��@-=� �>A�

?�"���5���! �5��1� ������'�� #� "*���"���! �1��

��"���"�#�#��#�����"��� "#�#�* ��@-=� �8/A�#��#����#�"��B3�B�#��#

�����#�*��#�� �#���

?�"���5�2�! ������'�� #� "*���"�2�! �1��

��"���"�#�#��#�������"�����#"���#�:#�#�* ��@-=� �>A�

?�"���5�2�! �5��1� ������'�� #� "*���"�2�! �1��

��"���"�#�#��#�����"��� "#�#�* ��@-=� �8/A�#��#����#�"��B3�B�#��#

�����#�*��#�� �#���

Understanding the Configuration at a Glance

����'� ��"���#�* ������"G��#�����#������"�����#�����#� ��*+��#�@��#�

����A���������&����#��#���������<

8�-������� ���������ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

���ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

E����"��#���������� ��#��'���#�<

� ���'������%����2" �#�@�%2A�*�"�����#�

� ���'������%����2" �#�@�%2A����#� �#�* �

� ��#���"�#"�����@� ����"�����#����A

� ������������"#"�����#�

� 2����#"���*�"�����#�

� 2����#"������#� �#�* ��@����*��#���2�! ����"�����#A

� �*+��#�3"*�"���@� ����"�����#����A

� ��#���@#����"�� ���#��� ����"�����#����A

� ��#�*�"�����#�

� ��#����#� �#�* ��@����*����! ������?! ����"�����#A

� ?�"��

-�������:"#��������'"���#"�������������#�������"#"��� ��#��'���#�<

� $�,6�����99�1�5�@2����#"������#�������%2A

� B�"�����#��5��1��@'���������#������A

� ?�"���5��1��@'���������#������A

Page 212: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

8–34 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

8�-������� ���������

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

0������������� 4��

0����%

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

E������ �������#���'� ��"����#��'����#� ��*+��#�����#�������

�������#����������� �������"'"�<

� 2E! ����#� ��*+��#

� �?! ����#� ��*+��#

� ��! ����#� ��*+��#

� 2�! ����#� ��*+��#

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

��6�������� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

����"�#� �#"����������'"������"�����#<

� 2E! �5��%2��*+��#�@��"* ��#�#"��������&���������������#

� �����#�������#"�����A���"#����#���������#���%2�����

��#�������"�2E! ��"#��#�* ���*+��#��������#���%2���#��

� �?! �5����� �����#��*+��#��"#��#�#���#���������#�������"

�?! ���"#��#�* ���*+��#��������#��#�#���#��

� ��! �5��2"#"����*+��#��"#��������������"#"����������#��

������#�������"���! ���"#���*+��#��������#������������

�"#"�����#�

� 2�! �5�2����#"����*+��#��"#�������#"�����#���������#�

�����"�2�! ���"#��#�* ���*+��#��������#�������#"�����#��

� ��! �5��%2��*+��#��"#��#�#���#���������#�������"�2E! �

�"#��#�* ���*+��#��������#��#�#���#�

Page 213: Cnc - Jdedwards Xe

Understanding the Typical OneWorld Configuration

8–35OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

8�-������� ���������

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

4��3�5�� ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

)'����������#�� ���"����������� �����#���+��#������������� ��#��

��#������<�2E! �����2�! ��E������ �����#�������� �����#

��#�������"'������ ���#������:#��"����'#�������"'"��#"���

����'������#���������������#���*�##����"#����������"#"��� ���#�

������������"������#� ���"�#�������#��#�"���#���#��#����''�#

�� ��#����"���#��������'��#������"#"��� ���#�����������������

��&"����:#��"����'#�������"'"��#"����������� ��������� ��'��

��#�������@�#��'����#� ��*+��#A<

� 4CD***

��"���#����������#�"�������#"����#��'��*+��#�#��#���

#�#�����"������'�����������" �#�*�'���#��'�"��

�*+��#�#�������#"����)#�"�'����� ��"���;�"�&�'":���

��&"����"������"'"��#"���#��#������" �;�"�& ��#��'��#�

�����#"����)#������ ��*����������� ����#��#�#����"'"��#"��

#��#����������"��#������� �����#���#�������*�'���#�&"��

#���"&��'�#��'�"���#����#��#��������#"�����#�������

� �)D***

.��#�"���#�������'������ ����� �����#��.��������'�

#�#"����#��'��#����*+��#�#������2E! ���#���������"��

�*+��#����'��������"#"*�#��#���������#�������

���&����*�" ����������&#�#"���"�#� �#"���

� =�D***

��"�"�#����#��'��"#"����*+��#��"�����'��������������

E������ ����#���&���������#��#�"���#��������#���#���

�����'":��'�����������������"���#�������"�����#�

������������������#�������'#����#��������#��

� �#"������������"�� ����#���"���#�����#��������E��

��� ��&������������'�#�"���#���������#��#������������� ���

������'������ ��"���������������#���'������#�"���

� 4�D***

��"�"�#��������#"�����#����������#5"�5#"���"�#� �#"��

������"��# ��'���#�"� ���#"�������������#"��������*+��#

���� ����� �����'��������$'#��#�#"����'#�����������"�

2E! ��#��'��#����#��2�! �����#������� ���#���������

#��������#��"������������&#�#"���

Page 214: Cnc - Jdedwards Xe

Configurable Network Computing Implementation

8–36 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

8�-������� ���������

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ

$ ���#�����������#��������*+��#�3"*�"���#�* ������#������

�#�����#��������������� ��#���������#���"�#"������������ �

�"#"��#�#�* ��������#����������#������#� ��*+��#,���"'"��#"��

@-=�!KA��#�����"��� "#�@-=� �8/A������#�������"�����#"���#�:#

@-=� �>A�

$#��������������������'�����#��#���������&������� ����������$

����B���"��������#��#������ #���#��*�#�����#�������������*�" �

���&����

)'���������"���*�#��'� �������#"� ����&������������ �������'��

���&���������#����������"��#����"�������#���'� ����&����@$����

BA�'�������#"��������#�����#"� ����&����@$�����BA�'�������#"���

-���:��� �<

� 2�! -$�@�#������2����#"���-� �$A

� 2�! -B�@�#������2����#"���-� �BA

� 2�! 2$�@�#������2����#"���2�#"� �$A

� 2�! 2B�@�#������2����#"���2�#"� �BA

Page 215: Cnc - Jdedwards Xe

B73.2 (1/98)

Glossary

�����������5�>��"#������� ���������

���"���������@�#��5�����#����

��5�����#��A�#��#��������#��#�#������� �

'������� "��#"�������������"�#����#���-�

�:��� ���"'�#�������� � �������#�������

��#"������������#��������#��#�������

�����#���+���� ���#��@����#"�A�"����

�"��# ��'���#������������"�"������#�

'��#����'�#�������� ����&' ���#�#����

$�#"��������������"�"��#���"#���'��

����� ����'�����#�"�5��#���5��" ��#���

������������������>������#�����#��

&��*����"�� ��"��� �##���'�#���� ���*�#����

� ��#�����*� �@������K��(��YA��*�#��:� ��"��

����� ���#������=��-���:��� ���P$B�KQ�"��

#"����'�� ���*�#"�������#���*�#�P$B�/� Q�"

��#��$ ���'����#�������� ���������#��

���#�#��"#��� �������"�������#�����

����"�������#��

���������������������>��������� �#���#��'

�����#�����#���&��*����"�� ��"��� �##���'

#���� ���*�#����*� ����������� ��-�

�:��� ���P$B�K/� Q�"���#"����'�� �������"�

�����#������#�#��"#��� ���*�#"�������#�

��������"�������#��

�����������5��5�>�$� ���������#���#���

��� "�����"���"���"���#���"��#��������'" ��

$� ����������'�����������"�����#���#�#��

��'���� ��������'����������#���"� �����#�

'���� "��������"�#�����#��#�

���>�$��� ���� "��#"�������������#" "#�

���������� "�"#��5'���#"����������#��)#�"

����� �����"�#����"#��#���������"��

������������������"��#�"����#�:#��'��#�

)�#���#5���* ������ "��#"���#��#�����*������

'�������*�*�����"�"����������&#�#"���

��������>�$������#�����������#��'

����������#�������� "����#�&��)�

����� ���#�������"�#���#"������ "��#"������

*�#������ "��#"����)�#���#"������ "��#"�����

���������'����#��'�'���#��������"���#��

���"�#���#��"#������� ���)�#���#"��

��� "��#"���"���#"'"��*��"���"#��P2�Q�-�

�:��� ���$����B��&�%��""���@2�/�/�A�"���

"�#���#"������ "��#"����B�#������ "��#"�����

�"#���#����"�#���#"����%���#�����#�* �

�����"�������:��� ���'�*�#������ "��#"���

B�#������ "��#"���"���#"'"��*��"���"#��P%�Q�-�

�:��� ���#���2"�#�9�" "���3�*� ����#

@%�/6�/A�"���*�#������ "��#"���

�����������5������5���������� 14&%>�$

�'#����'���#"����� �#��#�����*�������'����

������#�������'���#"��� "#�����"����*�

���#���������

������������6��>�$�����"���� ��� ����

��#��&�@3$1A�#��#����#�"����� "��#"������

*����#��&�� "��#�

������������3����>�������������

��&#�#"����"� ���"����"���� �� �#���'��

�"#�"�������� "��#"���������

����������>��������� �"�����"����'��

�����#��#��#���'"�����#��#�������#����

����#"�������������#"*" "#���;�"����#��"#�

�#����#��������'#�����)#�� ���'��#�

���"'"����������#��'��������#���#����#��

����#����"�#���#��"#��������#��������#���#���

�'��2.���"��#��#�"�������#���*�"��'��

�����#���#���

1�(<++�������>�����$�,6��� "*���#��#

#��"�� �����#�"���� ���'#�������#� �'" ��

����� ���'��#�������$�,6������������#�

���������"������� ��

1�(<++�0�77� >�$���#�������#��#��"��

������$�,6��������� ����#��#��#�"��������#�

#������:"#��#� "*���� ��"�������� ��#�

����"�'���#"����"#���� ��

������������>�$���#�����'����"���#�* �

�����"���"����"���#�#"������������"��

������#�� ��������#��������"��J�����'�

���� �#"���

���������>�������#�" ������"'"�* ���"#����'��

�������#����#"���������"#������"#��'�#��

�"�"�� ��������#��#����#"�����#"������

��#"����'������������� ������ �����"#���

���#�

Page 216: Cnc - Jdedwards Xe

XXXX

B73.2 (1/98)

����������������5����������� 11&%>�$

�����#��#��'��#�����������#�"��#������#��'

������#��$$)���'"���� ��'��������#��#

��#���#"�� �������#��+���� ���#"���"�� ��"��

"�#�'����*�#�����#���$�����#�2���* ��

$�����#�%���"��* ���-"����"� �%���#"�������

7���� �$�����#"����#����������#���#��#

"�#�'�����"#��#���7���� �$�����#"����#��

���$$)��-���:��� ���$$)������"��#�#��

7���� �3�����2�#�������#����#�����*"#�#�

�����"'"���:�����������#����������"#�#���

���"'"��������#�����* ��������#�

������������>�����'"#������ �����" �* �

�'#����'��������� ��� ���������� �

� ������ ���� ��� �

����>�$�������'�"�" ���������#����#"��

#��#�#��������#��#��#�����"�� ����"#���"��

����"����-��"���#"'"��#"����������#��

�#������ ���"��������*�#�������";��

"���#"'"��&���������*�#������*��

�������������>�$�"�� ��#�&���������'

#�&�#��#�#����#���#��#�����"�� ����"#

��"�������"�������������#����'���*�#��

��� "��#"���@+�*A��"#�� "## ���������

"�#���#"����2"�#"������#��������"���'" ����

�:��� ��

�����������>�$�'��#���#��#���"'"��#��

���*���'�#����#"�������#���#�#� ������#�"�

�����*�#���#��#�������#��"�#��#����#���

��������>�$�������'�#����#"��� �����

'�������:#��� ������

��������>�$�#�&���������'�#�&������*�"#

'������"���#��#�#����#���#��#�����"�� �

��"#���"�������"����'���:��� ����"�#"��

���#��������"���'" ��������#�����'����

*�#���+�*��"#�� "## ����������"�#���#"���

�������������5>�$���#����*����"���#��

�#���� ��#�+�*�'���#���+�*�;�����

������#���������������#��#�#��#��

��#;���������#�#��"#��"�#���#"�������"���

��������6��>�$����������"�������� �

*�#�������"����;��#�@� ���� ���.B�A���

���"�#�����'������� "��#�������� "��#"�������

�������#��"�������$�*�#�������#��"�� �

������#����#�"������#�*����������"#���

"�#���#"������ "��#"���

�������>�$�������"�����#����*�#���+�*�#��#

��"���#��#����"����#���#������"�#��

#����#"�����#�"���#������#� "�����"��

��������� ��#���'������"����-�

�:��� ���#���2�#�7���� ������ ������

� ��#�'����#"����� ������#���#����#"��

*�#�����"#����*�#���#�����'���

����A��A������������>�$�#����#"�����#���

#��#�� ������ "��#���� "��#"���#����'�����&

������ "��#���&#�#"����#�����*�"#�#�����&��

�#������#����������� "��#"���'��'�#��

����"����$���*�#��������"����"������#��

�����#���� "��#���� "��#"����������#"���

��'��"����#���#�&������� ���"��#�������#�

#��5���5'�����

����������5�������� ;��;%>�$���#�*���'"� �

#��#���������:"����"G�� "�"#������� �����

�"�"#"G���"�'���#"������"�'"� ��"��'#�������#�

#����*+��#������������"�� ������#�#"��

����#��#��#�����#���#����#�����

� �������"����#��

�����������5� ;��8%>�$� ���#����'":���#"��

����*���3����#���#"�����#�����"�� �#"��

'���#"����B"����#"�������"�������* �5*�#�

@.�"����A�#"������ �5*"#��"������ �#'���

��������������5�>�/A�$���5��" �������#��#

��������#���� #"� ����"�"��#���A�$������

#��#������������'���"�#�����'�"�����

��" *�:�

�������>�$�� "��#���� "��#"���#��#�#�� �#�

"�'���#"�����#�*��#����� ��"�����*��$�� "��#

��#������*����#�����"�������"�� �#������

�"� ����� ��"�����*�"�'���#"������#��

��&#����$ ��&�����������*�*����

����������������>�$�������� �#����#��'

*�"���� ������ ��"��#��#��������� ��*�

�����*���� #"� ����� "��#"����B�"��

'���#"��������:���#����#����#"��������*�#

�'���#����#"���@����&�"����#����"�����&

�������������A��B�"���'���#"���� �

���#�"��#���$2)�#��#�� ���#����#��*���� ��

'�����'��������#�*���#"��������

���5����� ����� "��#"����B�"���'���#"��

����*�����*"�����"#���#���*�"���'���#"���

'��������#�� ��������#�����������#�#�

��&����������� "��#"����B�"���'���#"������

*�����#���#����������#�� ���

#�"�5�����#"��� �������������������:��� �

�'�*�"���'���#"���"�� �������"#�����&����

)#���$��" �*" "#��

������������������6�������>������� �#���

���* ��*�"��� ��"�����#����"���#�����

Page 217: Cnc - Jdedwards Xe

Glossary

B73.2 (1/98)

����#�� ���#���#������������"�������#�#

�"#����*����������#�� �������� ������#�� ��

���������6���>�.���*������� ����� "��#"��

#���������#��'�����#�*���#�* ���$�*�"��

�"���"��������'��� ��#"������"'"���� ���

'�������������#�* ���������#���" �*�

����"�������� "��#"��������#��)#�������#

� ��#����"'"���������������#����#�"�����

���"�� ���#���)#�"�#"�# �����"���#��������"��

��#������*������ ���

;��������)��������5��1��� ;�1%>�$������ �

7.)�#�� �'�����#"�������"'�"��������"�������

�"�#"���*�"����"��������#�� �����

����"�� ����"�#�'����

���5��������>�$�#�����'������'"���������'�

��"��������������"���#���#"# ���-���:��� ���"'

�����������"����������#��#���"���#��

�"''���#�� ����"����������� ��������

��#����������6�#���� ��%��"����������'"����

@��#A����@��#A��1�@1�#�A��������@���#�A���#��

�� "������������#"����'����#�������#"��

����������� �������'"���������

�������������>��*+��#�#��#��"���"�������#�

���#"����������"#��'�#�����#<�#������#�

�*+��#���#��������������#� �����������#�

�������#� ��*+��#���#����������#�"�

����� �����"'"��#"������"������#����"���

� �#"��� ���#�*�������#� �����������#

���#�"��*�"���'���#"�����������������*+��#�

"*���������33�'" ������������ ��#����"�

�"��#�"�����#������ �����#����������#��

#������&��������#� ��*+��#�

0����������������5�>�$������#��#�* �����

��#���J����"'"��#"���#��#����*+��#�"���

����#�� �����"#���*+��#�"��������� ����

���������������5����� 04.%>������#�

��������#���"�����"����#�#��� ��"��

�� �� �#"����������""��0��&"���'���#"���

)�#���#������:���#��"�#��#"�������

���"�#�

������������6������>�����������'

�����#"��������#���'�#������� ��������'��

���������"���������#�����#�����" �����"��

�������"�"�����#��"������#��������

���"�����#�

�����������>�$���������#��'������#�

�����#"���������#"�� �� ��������

����>������ ��#���'��#�* ���'�"�'���#"��

#��#����������'���"��#����'#���������'���

���������������>�����#��#���'�������

�����������#���������#��'�������#� "#�#���

�'�������#�����"*�������������#�����

"�� ����������#����*��������#"�����"#

�����

����3A����������>������"��#���#��#��

���#"���'��#������&��������"#��#��'��� "��#��

�*+��#����"�"���� �

LL��� �����#���L� ���L��#�I����L

���&���L���&��������������*�"��#�"�

�����#�"���#����������#������#� ��

��������#�@������"�� ������*+��#�� "*���

�����33�'" �A�'��*�"���'���#"������#����

�����>���������#,��" ��'���

�����>�/A�$���&#�#"�����2��"����� "��#,���

���"�����#���A��������"�"��������'�#��

���#���"�����;��#,��� ��� �#"���"�

*�#�����������

���������3�����>����������#�������"����

�������#������� ���'#������� "��#"���

�����(���6��>�$�� �#"���"��*�#����������

���"����������#������"�����������

�����"������"����'��'#������"�������

� "��#�"�����������'�#������"����)�

�������� "��#,�������"������ ���

����#"����'�'���#"���*�������#���"�����'

��"����$�����������"��������� "��#��#�#��

����#"���������� �#��#��"������#������

������������"�������5#�5����� �#"���"�

*�#������ "��#����������������#"�� ��

� "��#�� ����"�"#"�#��#����"� ���*���;��#"����

��"�����������"�� ����"#�'���;��#�'��

� "��#�

������>�$�������'�#��������������"#�

"���#"�� ����'"���#"�������#�����"��

��#��#"������"�#�'�" ����)'���������'�" ��#��

�#����������#"��������"���

������5�>�$���������#��'������#��"�

��"������� �������"���� ���@�������"�#A�"

���"�#����"#������������#���#�

��������>���������"��"���#"'"���"�����#�

�������#���)#��� ���"���� ���:�����"���

��:����"�� ���#�#"���

����������>�$��$�,6������'"���#"����'�����

�������'#����#��#�� ����������#�

"�#�'��������#"���#�������*�#���������� �

������ ���'#����

�����>�$������#��#������#��#��

��#�*����������'����"�� ��#����#"�������

Page 218: Cnc - Jdedwards Xe

XXXX

B73.2 (1/98)

"�� #����� �����������������#��#������

"�� ����"#N��"#���� ���������������������'

#����������������#���*����"�#�"�"���#��

"�#��"#���'�#�����#�*���

���������������-�������3�������������>

$���*+��#��;��#�*�&��#�������������*�

#����*+��#�9��������#�7����

�������������������� 0�7%>�$

���"'"��#"������� �����*��9"���'#�'�

*�" �"����'#������������#�#��#�����*�

���* ���"�#��������������'���#"��� "#��#�

�:"#"������������"������9"���'#

�"������ �#'������9���������#�����*�

�"##���"������"�#���'� ���������� #��������#

����"##���"���ZZ����������*����� ������'��

���������#���#"����"#���#����"���#�

�����" ��#���������

0����������8����4������6�������>�$

����� �����"�����#���������#��"��

���"�����#�'�������#"�����#�����"��

"�� �������#��#�������#��#�* ��������

�����������#��#��'"�� ���#����##�������

"#�����#���.��#�"����"�����#�� �����"#�

#���#�#����"�����#�#����&��������

���'"���#"�����&�*�'�������� ����������

#�����0���

�����5���������������5���>�$ �����

' �:"*" "#���#�#���"�#�'���� ��� ��.��������" �

������� ������#�#�*�'���"''���#���#���"���

����"G���"�������"���#��#��"����������

���'"���* ��� "��#����"���� �����* ��#��

"������#"����'���*�*����"�����"#"���#�

#����"�����=85������"�����1�5*���

"�#�'����

0����5������� ����3�0�����5� 0 0%>�$�

��� "��#"������"#��#���#��#�� ���"�#���#"��

����*�#������ "��#"�������������'���"�� �

�����*����#�������������2,)2���#��&��'

�� #"� ������� �#'��������H3���#�*���

������� "��#"������"#��'����* ��*�"��

'���#"����������"�#�����#��#��#�����*�

���'"���������#�����#��&������"�� ������

���� ��*+��#"���'��*�"����"�#�����"����

'�#��5���'����"�����#�#��#����* ��#����#�

�����������"G�#"��� �#��#����*�"��

�����������#����� ��"��"���������# ���'

������#���

�������>�2����#���������#��#������#����

#��#�#����#������#��#�����"G��#��

����"����'�"�'���#"���*�����"�#��

������

������>�$�����#����#����"�#�� ��"���#�����

#��"�#���#��"#�������� "��#"����-���:��� ��

����&�*�:����� 5����� "#������5*�##���

��#��'"� �������"�" ��'��#���������#� �

0������������2��3�����>���"���#��

)�#� �#"�����&*��������������#� ���* �

��&*��������#���*�#������ "��#"���'��#��

� �����������#��#�����#��#�����#���"�#"�����

�����'"��������������������������"��

#�* ��

0����������������5�>�$������#��#�* �����

��#���J����"'"��#"���#��#������#� �#�* �

�"#��#�����#��#��#���������"��������� ����

�������6������>�$���"����'������ �

�'#����#��#�"�� ����'":����������������#

�����"����#��� �#�� ����������#��

������5��������>�$��"�����#��#�������#

�����'���#�����#�*����'���:��� ���#�#� ����

�"� �����#�#� �"�����"������#����� ������

"��#�����#����"� "���#���"� ���#���#�#� ��.�

#����#���'���#"���)��#�7"��%���B�''��#�

������ "��#�"�

����������������>������'�#���#���#�����'

"�#� �#"������������#����"��#���)�#� �#"��

2 �������� "��#"����$���#���"�#� �#"����"��

#�����#����' �:"*" "#��"�����#"������ ����"#�

����������"�����#��"�� ��������#��

���"�����#��������#�����#������������� �

#��"�� �"�#� �#"���

������������������>����������#���

��&��#������� ��#����&��#����'#������

�����''"�"��# ��'��#������#�����#�#��"

��#"�� ���;�"����#�

�������>�������������#��#�����������

�������� ���$���#�������#�"��"��"�"���

���

�������������>�$���#�*���#�* ��#��#

����� �����#���������#�����'"�"#"���

#��#����������"�� "���'��#���������'�'"� ��

������������� ��#�:#������������������

��#"�����#���"�#"��������"��������#��#�"#�"

��������#���#"���

�����������������5�>�$������#��#�����#�

����#���J���#���"�#"�����#�* ���"#��#�����#�

#��#���������"��������� ����

�������>�����#���#5 ��� ����""�������#

��#�*������������ ������#��"���#��'�����

��#��"����#����������#��#��������

������'����� "��#������������" �����#��'��

Page 219: Cnc - Jdedwards Xe

Glossary

B73.2 (1/98)

������#�������"G�#"������#����#�����*�

�"#���� �#"��� ����� #"�"���"��� ���#�*���

����������5����>�$������#��#������

��#����*�"�����#����������"���'����

���"���� �����'������ ��#��������� ����

��"���#���#���������������*�

� "�"��#"���#��������#����'���#�����������

#�* �������"���#��#�"������#������������

��#��"�#������#���J��:"#"�����#��

�������������>�)������ "��#������"�����#�

�� #"� �����"���'���#�������"�#�"������

�� #"� ������"�����������#�*����"�� �

�����#��#�P���Q�#�����#�����"������#��#

#��� �#�#�������'���#������*����� "���#���

�"����� ��������#������ "��#����

�����"�#�����"�"�"�����#�#�#����"�� �

����"����'���#��������#��������"���#

��"�#�"����'��������#� � ���#"����*�#��:"#

"���������# ���'�#��������

�������6��>�$�����"����;�"���'��$�,6��

������������#����#����#� ��*+��#�"���H3

���������� ���2�##"������#� ��*+��#�����

��#������#� ������ ��#���������#����#��

��#��"������

����������>�$����"'"��"�#������'�����#�*��

���������#��#������"�������������#��

��#����������������#�"������� "���

#�������*+��#����'"���#"���9������@��9A

�����*+��#�9���@�9A�

�����������2��3�����>���"���#��

)�#� �#"�����&*�������������#�������

��&*��������"��� ���#�������#��#���

��'"����"��#���"�#� �#"���� ���'���#�����#�

������9�#��������* ��������#���������"G"��

#�* ��"��#���2 �������#�������#��#�����#���0

� �������*����#��������)#�� ������#��#��

��#��������2 �����#�" ������#���' ��#

���� �#"���

�����������>�$�������'���#��"#���#��#����

*������'����"���"�'���#"���*�#����

�*+��#��'���:��� ���*�#�����#���'���

*�#�����'�������*�"���'���#"�����

*�#��������#�����*�"���'���#"���

�������������>�$���#�*�������'�

�����" "����������� "��#"�����#��'����� #"� �

��#�*���*�'���"#�"��"#"*�#���#����#����#

'������#���#5 ��� ����""�������#�;��"�

�������#��������#����������"������ ���

����� �#"��� ���#�*����"�"�����������"��#��

����*�#���������#"��� ���#�*�������#��

��#����#�

�������>�$����#"���� ������#����� ��#"����'

� �"�'���#"���#��#����#����������#���

��#�*�����&��"#���"* ��#�����#���#���

"���:��������5�'������"�'���#"����� "���

�������������������>����������������

���"� �&" ���#�"�"���"������������#�����'

��#�*����'#�����'���:��� ����H3�������

��� ��

�����������6��>���'#����#��#�������#���

��� "��#"���#�������"'"����#�*������������#

�#���

������������5����������� �;7�%>�$

�����#��������#��#����������#��*�

���"�"������#� "G������#� ����#�

"��������������������� �:����"�� �#��#��

'���''"�"��#�������"�#��"#����������

��������������#� ���"�������������"#��

�����������6��>�$�����#��#�#�����#���$

��#�*�������������#����������� �� ��"��

������>�$����������*����������#��#��#�#��

�#������ "�������#������������#����"'�

����

������>�$��� ���#��#�#����#����"�������

#������������#���#������ ����-���:��� ���"'

#�����'�� #��� ���'�����"���#�"�1�������#�"���"

��#����"��#��#�'"� ���#����#��������#��

��'�� #�"����1��� ���

�����������6�������>�$������ �

���"�����#�����#���������� �����#��

��� �����#��������"����"�����#

���"�"#��"�'���#"���'��#����#�����#�

�����������������'" ������&��������

���"�����#�

������������6��>����������#������#�

"�#� ����"�#�"��������"#"*�#������� �

�'#����#��������������#��"���������

� "��#���&#�#"���

�����>��������"'"��"�'���#"���#��#���&������

�������#����#"�������#�#��"#��������

����������>�$�������'���'���#��#��"� ��

��#�" ���"�'���#"������"�#����"#��#�������

����#��"#����"� ��������#���'��������� �

�"��

��6���������6�������>�$������ �

���"�����#�����#��#�#����"'"������� �����#

Page 220: Cnc - Jdedwards Xe

XXXX

B73.2 (1/98)

�*+��#�*�'���#��'�"���#����#��#��

���'�����������" �#����"�����#�

������������>�$�#����#"�����#����"����"��

��� "��#���� "��#"���������"��#��"�#���#"�� �

�����"��# ���"#����������� "��#"��������� �

*�#��5�'5����"����"�#���#��5���5'�����

�������>�$������ �����"�#�'����#��#���"��

�����"�#���#"�� ��#������������� �������

���3>�$��"��#������#��������"���

����������������5���6�������� �0�%>

$��#��'�"�#���#����'#������"���#��#�� ��

�'#�������"�������� #"� �������#��#�

��'���"����������#��#�"���� �����

#������#�#��#������5�����������"��

���"#����"��#����#"�������#������������ �

����'" �����������#�����"�������

��#��&�

����������������������5����������

��;7�%>�$��#���'���"#"*�#"�������#�*��

����"#����#� ��#�����������

�������"�� ���"���������"���

��� ����������� � �%>�$�#�����'���#������

#��#���#��:"#����#���$�,6���*�������'�B3�B

�#"�#"���

������E���������������� �;0�%>�$���#���

�'������#"������������#���"�������*�#�

�����#��������#���"���#���*�#��

���* �5*�#�������#���#�����������#�

�����#����������#��"��#�������������

C������������"���� ��������

������E�����������>�$���#��#�����'��#��

#��#�� ����������#��#��#���"�������"�

�����#��'���$"��� �������������������

���"���#����";������������#��*�#�

"�������"������� ���*�#"�������#�����&"���"#

��"��#��#�� �#�������� "��#"���"�#�����#��

��������

���6��>�$�����������#"����'���������#��#

���#� �#���#��'���'���#��'������"���#��

��#��#����"���

����������������>�$����""�������#

��#�*���#��#����#�"����#�"��#'�����������'

����#"��� ���#������������#����"��� ��

"���������'�������'��*�#������#"��� ����

���#"������"�����#������� ����������

��� �"���#�*������#��"����#����������

�����������3��������� ���%>�$��#��'������

���� ��#��#������"�����#��*��"���&���'��

�:���#�* ��'" �������#����:���#�* ��'" ����

�����"#���#����"���#��*�� "�&���#��#��

�:���#�* ��'" ��������#��"�� �����#�"�

������ ������'���#"���

����������������5>������*" "#��#�

�����"�� ���"#"*�#�� ��"������#��#���� #"� �

#"��"����� "��#,�������"#��#���

��������������&�������5�� ��&%>����

���� ��������#�5#�5�����#���:��������'

*�"���#����#"��������������������

����"���"����"����#������'���#��"#��#�����

���#��#�

����������6�������>�$������#�� ��#��#�"

���"'"��#������#"�� ��#�* ������� "��#"���

�:��� ��"�� ����'��5#�5'����� ���"�"����

'"� ��*�������������"�����#"����� �������

�� "�����*�"���'���#"�������#�#��"#�

*�"���'���#"�������#�� �������� ������#�� ��

��������2��3�0����>���"�"������#�

���#"���'�����"����������"�"���� ������ �

������@�#���������������#��A����� �

�'�#����"�"��#"������ "��#"����������������

�������" *�:�#��#����#�"����&' ��������#��

�������"�� ��"���$�#"���9�������"#�

����#�#����&' ����#���9��������#��"

9$2)����� "��#���������#������������

��&���"�����#����� �#"����'��������

�� ���������&' ������"#�"����$ ������

'���#������������#������*���"�����#�����

����� ����������9"���'#��:�������

�����������>������*" "#��#�����'"��������#�

�������"�� �#"����'���#���"#�"������*+��#�#��#��

��������#��#����#"*�#��#��#�����'"�"#"����'

#��#��*+��#�

��������>�$��"��"�"��� ������������� �

�'#����

�������������������������>�$���#�*��

���#�"�"������*�#��'�����#"��� ���#���������#�

���#��������������� �"���#�*�����'��

�� �� �#"����������"�����������#��#�

����������#"����'����#�����;���������

#"������"�� �#"���"������"�#��������:#���

��#����#�*��������#���������#���������

�"#�"�� ���#��"��������'��#������� �"��

��� �#������#"��������� ����� "��#��

��#�*������#��"����#����������

��������>�����������2���������#�*���#��#

"�����������"G�#"��J���#��&�

Page 221: Cnc - Jdedwards Xe

Glossary

B73.2 (1/98)

����������������������>�$����� �:

� �#"���#��#�"��� �����#��'�������������'

#�����#��"�����"����"�����#��;�"���� ���

� �#"��� ���#�*���@#�����#���������A�#��#�"

�����#� ����"#����'���#��"����#�����"���"

� ����������" ������������ "��#����-���#�"

���"#������#����#��#"������#��#�����"��

����#���#5 ��� ����""��������� ����� "��#��

��#�*���������������� �"���#�*���

������������6��>�$���#�*����������� ��"�

�����������#�*��������$ ���'����#���

��#�

���������2��3�����7���5����>�$

����� ���#���#��#����"����������'

��#���#"���#�&����������#"'�"�����������

#��#����;�""#"���"���"#"���'�������� ���"��

����5��" 5*���������' �����������#��&�

��6�������>�$���#��������"#�����#��'��*+��#

���'"���#"���9������@��9A�����"���#��#

� ��������#�� ���#����#�����������"'"���#��'

�*+��#���:��� ��"�� �������'������%���

2" �#�@�%2A������ �����#�������#"�������

�"#"���

��6��������0���3��>�$����� "��#"����������

���*�'���"�#� "����������"�������� ��#�

�"���������'"���#"��������#���"���#��#

�����:"#��#�#�������#"����#��� ��� �

��6��������2��3�����>���"���#��

)�#� �#"�����&*��������������"�����#

��&*��������"��#������"�����#�"�'���#"��

�����*+��#����'"���#"���9������#�* ��'�

��������"�����#�'���#���2 �������#������

#��#�����#���� �������*����#��������)#

� ������#��#������"�����#�2 �����#�" �����

#���' ��#����� �#"���

������>�$������� ���������������"��3$1

#����� �������"���*�����#�������#���

��������#�����#��&������#���#����#

������#����#��/���6�������#�/�9B���������

����#�"#�����"���* ������:"� ���* ������

��#"�� �'"*��

�6��>�$����#"���#��#��������������"�#���#"��

��*�#������ "��#"���"����"�����:��� ������#

���#�**"�����#��'������"#����#� ��� "�&"����

����*�##����"�"#"� "G"�����'��������'��"����

�����*��&���������#������7.)�����#"��

�#�������"�"������#�����������

��#"�"#"���"#�"����'����$��"#"��� � ��"������*�

�##������#��#�����"�"��������������#���"��

���#��'���#"��� "#��#����������#��"#�"���

����� ����� "��#"��������#��"�������#

� ��

�6�������>�.���#�����#������ �:�*�"��

��"���"#���#�#����"''"�� #���#�:�#��#�������"#�

�����������"��� �������������� ��"�

#�#����#�����*���##������#����� "��#"����

��#�*�������#���������:���#��������#��

��'"��������#���������������#�"�����'���

� ��#"����������*����#"���������*��&"�������

���#����� ��#"�����������$������#�� �����

�� "��#����#���������������#���������� ��

*�"���'���#"�������� ���������#�����#"���

��������#���#�����'�����#�� �<

/ ��*����������#�� ��

� B�"���'���#"�������#�� ��

��������������>

$������#��������#��#�����*�����'���#��

�����#�J�����#"����#�����;�"�� ��#�#��

���P��� "��#"��Q�����P������Q�

�������>�$����#"#���"#�"����*�"���'����"��

�������#�#��#��&���#��-���:��� �����'��" "#�

�"��#�*������������ ���#"����+�*����+��#�

��&����#�����*����,� ��#������#"��

�'����#������*�"�����"#�

�����>�/A�$�����������'���#��#������#��

��#"�� ��#�����'�"�'���#"���������������

�������#�#������������#���A�$���'"�������

�"#�"���������#��#����#�"�������"'"���"�����'

"�'���#"����-���:��� �������� "������

���"#��'�#���'"� ������ "��1�����$����

������ �������1��*��

����>�$��#��'�"�'���#"���#������������

����������� ��#�* ��

�������������������� ��4%>�$��#��'���2,)2

������������#�� ������#������#��&�� "#

�"��#�"������������'" ���-�2�"�� ���

������"��#"�����#��� �����#��#���"#�'" �

�"#���#���#�� ��

����(������>�$�#�����'�'�������#�<

/� ��������"��������� ��#��� #"� �

�����"������#�" �����

� �� �#�������

�:"#�#�����#���'���

6 ������������#����"�#�'����#

��� "��#"���

��������>

$��#��'�#����� ��"��#��#�� ��������#��"��#�

#�#��'" #���������#��� �"����"���������

-"��� ��������#��&���������#��"�������

Page 222: Cnc - Jdedwards Xe

XXXX

B73.2 (1/98)

���(�����>�$�#�����'�'�������#���"��������

�����"'���:"#"���������$�'":,"����#�'��

��������#�" �����

����>������ ����#��'�#�������� ������"��

���"�#�'����*����"���#�������:���������#�

�"#��"�#���#"������ "��#"����-�������������

�'����#� ��������'"� �����#"��������#����"��

��������#� �� ���#������#���#"���

"�'���#"��������������"��"�'���#"�������

���"��#��#������������ "��#"���#�������� "���

#�&�

���������5��1��� ��1%>���������� ��7.)

���� �����#�#�� �'��*�" �"���"�#���#"��

��� "��#"�������'���

������������������>�$ �������'���#�

��������������#��#�����#���'����-��

"�#�������#"�������*���##������#����������#N

��������#����������� �������������*�##��

"�� "�&���

�������>�����'� ��"���'���#������

���" �* ��"������� �<

/ -"��,*����

� -":,"����#�

4�������#�" �

6 4���� ����#�" �

8 9�����

> 2���#,��" ��

! �����,� ��#�

������5������������5��5�� </�%>

$�������"��� ��������#��#�'�����������#

���������#���������#������#��"�������#����

"#���#��#����H����3��������"�����:��� ���'��

673�

5��������������>������ ����

5������������������>�����9��"���#����

�*+��#�

5���������������������� /.&%>�$������#�

"�#�'����#��#�"�����"�� ��*�������������#�

*�"��������#�5*�����$���:��� ���'��

�����#�5*����"�#�'����"�#��#��'�#���$�,6���

$���:��� ���'���7.)�"�9"���'#��"�����

7���"�� ��*����"�#�'����� ����"�#������

�#�������"��"�����#��*������"������#���"��

���� ��� ����������#������#��#��������#��

5���>�$����#� �#��#��"� �����#�" �"�'���#"��

�����'���������"��"��������"�#��������"��

����� �������#�������'���#������

�� �������"�������� �������#�'"� ���'�#��

����������� ����#�" �����

������>�)�'���#"����#�#���*��"��"����'���#�* �

��'����4�����"�'���#"���"�����#��"���#"'�

�����"������#� �"�'���#"���'��#���������'

�����#��#�'� ���

������������>�$�#�����'�'�������#������

���"'������� �#�������'���#����"''���#

#�* �������#�* ����� �������������#,��" �

� �#"���"��

����������������>�$�#�����'�'�������#����&

�"#���� #"� �������"������#�" ������������#�"

����"�����* ���'��'����"�"���"���#�

���>�)��#������#� "G��������#������ ���� ���

#"����"��������#���#���#��#�#��"��

������"��#���"#������� �����'������"����)#

���#�#��"#��� "��#,����"��#��#�#������

��&��#������#��#��#���'���������'�#��"

��������"����������������#��#����"��

��"���������'" �����������#�����"#������

�"�#�����������#�

����������3�����5��5�� ?�7�%>�$

��&��� ������������#�����"'��#��� ��"��

#��#����'����������#��#���#����#������"��

����#������"'�"��� ��"�� �#��#�����&�����

4�93��������#�� �#'���"���������#��E������

�"������4�93��������#����������&#��

����* ���'�����#"�����*�����4�93����

"�� ������#"��� "�&�#���#���4�93��������#

�����������#���)�#���#������"�#���#�"#��

�����>�%�����#�*�#��������"����'��� ��

��������";������'��� ���#��#����"����''"�"��#

�����#����#��"������'���#�* ���$��"���:�"

���������'������������� ����"��#���#�* ��

����������>������*" "#���'���� ��#����"�����

����#��'�#�����#����������������'"�"#"��

'���������#�� ���)���"#������������

���� ������#�#������#��������'�� ������

#��"�� �#��������

������>���� ������'� �����#"� ��#��'������ �

�'#�������������"���#��#�����:"#"����

����:"#"�������� ���'#�����������"�#�

����� ��'��#����'"#�#"����"�#� �����������

��"�#� ��������#��

����������>�����������'���##"�������� �

�'#����������������#��'��#���'"#�#"����$�

�:��� ���'����"�#� �#"���"�B! ����$�"�

����� ��)�#� �#"���7�"���

&����������4������>������ ��������#��#

������#������ �����#����������#��

���"�"#�#"���#�� ��)�#� �#"���2 �������"��

Page 223: Cnc - Jdedwards Xe

Glossary

B73.2 (1/98)

����#������#���"�#� �#"����#��������

"�� ��"�����'"�"���#�����#��"���������

��� �����#�� �#'���"�'���#"�����##"�����

���"�����#��������'"�"�����#�������

&����������2��3�����>������ ���#��

���"�"#�#"���������#��#�� ���#�����

���'"�����'#��������������������

������&#�#"��������"���#��#���� ������

���#���"��)�#� �#"���2 �����

��������>��������������������'�����#

#�&�������������"���������� �

"�#� �#"������������������#��

���5����������>�.�";���#������� ��"���

"���#"� 5#���#��#�� �#���*������"��#��

� �������������"���*�"������ "��#"���

��"�#�� �#�"�#�������#�� �#�����*������

������#��*�" ������� ��"�#���#"������

*�#������ "��#"����9��������#�����

���� �����#����"�����#����������#��

����� ��"�#���#���#�� �#����� �����#"��

�����#���*�#��������������������������#�

����*�"����#��������"���'��" "#"��

���5�����>�$�"#��#"���"����"�������������

�'#��������#����'#�����'����#����������

�����#���������#�*���

���5������>�$����������#����� ����#��

�������J�"�#��� �*� ���"�����������*�

���#"����������#"���*� ���"�����* ������

��#��"����"#���"��

�������6����������5>�2���"�����#"���#��#

�����"��������#����������#��#�������#�

�"��# ��"�#��#����#������"���"�#���#"��

����"�����������"���"��#�������"��#"��

�"#��#����#��������"#��"��#�����#�����'�

���"#"��� �"�'���#"�����" ������"������

�;��#�����#�#��"#��*�#�������"���

�������6����������5>�$�+�*�#��������#�

��'���"��������#���������������"��

"�#���#"�������"����#������������"��#�

�"��# ���"#��#��������#�����"�����������#

#������#��"���#����"#"��� �"�'���#"�����"��

#�������"����'����;��#�

&�����>������� ��"������#� �#"����'

�������� "��#"��������"�'���#"������" �* �

#������&#���� "��#�#�������������� "����

�#���#�����'����#�������

&�������������>�$����"'"�����#������#�

�����������"������������#���)�#���#�����

��#��'�#��������"���#"'��#������#��#�

�������������#�����'�*�"���

�������������>������*" "#���'��"''���#

�����#���#������#��&������#"����#���

������� "��#"���#����&�#���#����������

"�'���#"���

������>�$��� ���"����'�#���)�#���#���� �

���'"����#��������������������"G�#"����$�

"�#���#����#���'���#"��� "#���'�#���)�#���#����

� ����"#��#�#����"��� ��'���"�� ����#��"��

&4>�$�������#"�� ��������"��#"�����#���

#��#�*��"#� '����"�������#�������"���

��#��������� '5���#�"�������&�#��'

"�'���#"���#��#����'�������*����#��*���

���#��"����������#�����#"���#�* �

"�'���#"������#�"����"��#�����#������������

�������2,)2���#��&��;�"����������#��#

"���#"'"��*�#������#��&������� ��� ���#��

��������#�����#��&��)����#�����#�����#��&

���"�"#�#���#����#��������������

"�#� "���������&#�#"����)����������

��������"#�"���"* ��'������&#�#"��������

*��#"�������#��;����������'���������"�� �

�"����������

&���6������6���>����� �����*�������������

#�"�)�#���#�������"����"������#�����*

���������"�����#������������ "�����'�#��

������ ��'" ��'���#�����#�*���#��#���� "��#�

=>�>����������������>��������B$�����#�*��

9"�� �����

=�6�>�$��)�#���#��:���#�* �� ��������#��#�� "&�

���"���"�����#��*���"�� ����#�* �����

� �#'������"�������"��� ����������

���� �����*������9"���#����$�� �#���

�������� "��#"��������*���������'�������*

*���������:���#����#�#���� "��#�����"���

#��#�#�������#"����#�����*����"

����5���* ����@�����"��'#������"*������

�� ��5������ZZA���������� "��#"�����

� �#'���"���������#�

=�6��������������6��>�$�����#�����

��"������������"�#���#��"#������� �

��� "��#"����"�������*�*����

=�6����������0������6��� =�;0%>����

#����������#��������������#�*�����#�*�

����9"���#������"�#������� �������#�

���������B���"�����#�*���

Page 224: Cnc - Jdedwards Xe

XXXX

B73.2 (1/98)

=�; ��>�$���#�*����"���#��#�� ��

��#�������������#�������������#��J

��#��

���>���>������������'" ��@�����*��'�

$�,6��A�#��#����"���#�����#"����##"��

�;�"���'������� ��"�"#"� "G�#"��������"'"�

��"����'�#���'" �,���*����#��"�����

���������"������"�������� �����"�"�� ���

��&#�#"�����������

=��>��/>�������"���"����#"�� ���'" ���'

����� ���$ ���� ���#���"��#�����#��"��#��

���#����"�����"�������#�"��#�#��������

������'���#���#�#�����������#"����'

����� ��

=��;1�����������7���������>�����������

���"�#�����#�*����"�� ��������&����#��#

���"���#����"����*���'"#<

/� 2 �#'��5"���������#�$2)�'�

�� #"��#�*��������������$2)���

����"��#������<

�� B��#���"�#���#"�������*�#������"���#�

�����"�� �������#��� �#'��5���"'"�

�H3��������"������#�����#������

�;��#�

*� $������$2)�'�������������*�"��

'���#"����"#"���������$2)����#���

����*��#������"���#�������"�� �

�����#��� �#'��5���"'"���H3�

�� � "��#5#�5�����������5#�5���

��#�*������������������ "��#�"

����� ��"�"�#���#����"#������"�#�

�'�#�"�5��#����#�*����"���������

� "��#�$����6��������������#�*��

������#"�"#��@��B�A�

=��0��������>�$����� "��#"���������"��

"�#�'��������*��*�"���'���#"���#��"���&�

�#���*�"���'���#"���

=��&40>�������"��#"���������"���#��

����*�����������#����� �#�������#��#��

������#��"���� #"��������"�����#�

������"��#����������"��#��*�#����

��������������#������������

=�� ���������������������������>�����

���������"�#���������"��#"��

�"�� ��������&����'������� ���)#�"��

���5#�5����������5*�������&�#�*����

�� #"�����������"��#"����"�� ����

� �#"����)#����� ��� "��#5#�5�������

���5#�5����������"��#"���'���

����� ������#���� �#'���

���>�$�"�� ��"���#"'"�* ���#��'�����"��

��#"���#��#�����"��#�#��������#��#�

��'������*����"�"#"�#���*��� ��#"�������

��#"������#�"����������������"��

��"���#���'���#"���&���

����-����>�$�������'�+�*���"#"���#��*��*�#��

������������� ��*�#�������"���

���������������������� =&�&%>������ �J

��#�����'������"�� ���� "��#"����*+��#�'��

#������#� ��*+��#� ���#"���#������&#�#"���

��������������������� =&�8%>������ �J

��#�����'��� "��#"�����#��#��"��"�"���

��&#�#"��������� ���� "��#����������

@"��#A��� ���#�#���#"���#�����������#��

��#������������� �#�����������#����#�*�

�� "��#����"���2� �%�� "��#"���

��������>�$��"�#���"��#�#"���'����������"#�

���#���"�#��#������"��#�����#�#��"#����#�"#�

���5��5����������������>�$���**��"�#"��

#��#�"���#"'"��#�����'���� ��������#��*�����

'��#���#�:#�'���� "��������"�#�����#��#����"

�����"�����"��#��������'" ��#����"���#��#��

��J���'���� �������@A�

����������������3� �1 %>�$���#��"#����

��#��&����"#"����'���&#�#"����������

1����������������"��#"��� "�&��)#�"

�"#"���"����*��#����*������'

#� �������"��#"�����"���

�������>�������#����*����"�������� �

�������#�������"G�#"��� ���#"#"���"#�"����

��#��"��������"''���#"�#"���*�#����� ���#"��

����*�����"�� �@'���:��� ���1���E�&����

��&��A����"#�� �@'���:��� ���4���;��#�

����$�����#"��A��$� ���#"���"�"���#"'"���*���

#���5�����#�� ���#"�����������"���"��#���

��"�������� ��"�#� �#"���

��������2��3�����>���"���#���)�#� �#"��

��&*�����������3���#"�����&*��������"�

� � ���#"���#��#������'"����"��#���"�#� �#"��

� ���'���#���3���#"���9�#��#�* ��"��#��

2 �������#�������#��#�����#�����#�������

��5������>�-" ��#��#�#��&�����#"���'���

���������� "��#"����%��"��"��� ���'" ��"

�� �'� �'��#��* ����#"�����* ��������'" �

�:#��"���'�� ���'" ��"��3�7�

����������>�$���#�*���#�* ������#��#��

��#������"�'���#"���#��#�"��������#����

�������#��#����#��J�����#"����9�#�

#�* ���"��#����#�"����#�����������"��#�:

Page 225: Cnc - Jdedwards Xe

Glossary

B73.2 (1/98)

�����#����� "������������������ ����

"�'���#"��������+�*�"�'���#"���

����������5��������>�-" ��#��#���������'

#���'� ��"������"���������#"���#��#������#

����"G���"�#��#�* ��'���#<�7:::��:::7���

7�:::�

��������3��5>�$����"#��'��#���#��#� �#����

�����#�"��"�"��� ����'�������"��

���"'"���������������� ��#"���

��������5�>�$������#��#�* �����

��#���J����"'"��#"���#��#��������#�* ���"#�

#�����#��#��#���������"��������� ����

���5�>�$������ �������#��#�#�&���

��#���J���#������"'"��#"�������* ���

#����"�#��#�����#��#��#���������"�������

� ����

7����5��5�1��������4��5������5

&�������� 714&%>�$�����"#��#���#��#���'"��

#�����������#��'�������"����#����������

#����*�������)#�� ����'"���#���"�#�'���

*�#�����#�������"����#�������#��

��������#�

����������>�$������ �#���#��#������� �#��

�"#"*�#����'#�����������#������#

"�#���#"���*�#������ "��#������������"�&

�'�"#���#����'#����#��#J�"��#����"�� ���'�#��

� "��#,�����#�����#���P� ��Q�#��#� �#�#��

� "��#��*#�"������"���'���������

�����>�$��#"�#"����� "�"#"���"�#���#"��

���#���*�����"��������"#"����'�����#"���

9��� ��'#������"*�������������"�����#��#

�#"�#�����J�"�#���#"����"#���#����"�����

$����������"���������*������ ��"#������#

#��"#J��"�����"�������#��#�����#"���#����$

���� ��"� ���*�:���#�*��� ����*��#�����

*�'���#������ "��#"������#"����

��������>�1�#��#"�#"����� "�"#"���"�#���#"���

9��� ���'#������"*�������������"����

#��#�������#��#"�#�����J�"�#���#"����"#�

�#����"������$����� ���"� ���*�:�#�����

#������������"����" �* ��'������#�����#"��

*�#�� �����"#��#��������#"�"#"��

������������������>�$�� "��#,���

���"#��#���#��#�� ����� #"� �� ��� ��'

����"����$�#"����'"���#������*���'

�����#��#��#�����*������#������ �#�����

��'"����#�&�

�������6��������� �8%>�$ ���� ���*�"��

'���#"�������#�� ��������� �#�������* �

*�"��� ��"�����#����"�������#�� ����#��

#������������"���

����������5��5������� ��%>

9�����"�����"����#��'��" "#�#�

"�#���#"��� "G�#"����'�*�#���#������

��� "��#"������"�#�'����

�����3����������>�$���";�����"#"��

�"�����#�������������#"���"������#��&�#��#

�#����������������������"��#"����"#��"#�

-���#����#�������&���%"�����#��&�����#��

��";�������������"������#�#���'��#������

���"#��'���>5*�#��������4� '��'�#�"�����

"���#"'"��#���*���J�����'��#������" ��#��

�#��� '�"���";���#��#���*��������"��"����

�����#���*����"�����'��#����

������"��#"��������������#����*�����

���#����#����#�����&���%"���1)���" �����

"���#"�� �������

�����3�������>�$��������#��#��

����� ������#���#�����#��&������#���''�

@"��#����A� ������#��'�����������

�����"������ ������ �:"#���B�"�� ���"#�"��

�� ��5�����2��@���� "## �����������"&

����A�#��#�����*������#���������#��&5*���

��� "��#"���@�������� �#��$�#"��F����#� A��"�

����#��&�*����

�����3�������5>��'#����'����#����#��

��:#�������'������#"����'#��� "��#,����

��" ��"#��:��#���'"�"#"������"���*�����"#

����� �����������"��������

#������#������#�������#"���������

*���5#� ��'��#5������ �#'��

"������������������#���"�" ��������#�

�����������>�$�'��#�������#�����#� �#��

��#���#"�����*�"����'�"#�������������7,3

������#���������������������1�:#

���*�����"�������#�����'�"������#"��

���*��

����>�$�#��"��#"�����"�#�'��#��������

������"��#"��� "�&��$����������������#��

���#� � ���#"���'��'����"�����#��������#��

� ����#��'�����#��&����� #"� ����#��&���

�� �����'����#�����#��&"��������"�����

����� ��� �����"���

�������:��>�)����#�*������������#�

���� "G�#"������ "����*�����'�#����";���#���

� �#"��� ���#�*���"������#���"�"�"G��#��

Page 226: Cnc - Jdedwards Xe

XXXX

B73.2 (1/98)

"�� �"����'���� "��#��"�'���#"���

1��� "G�#"���"��"'"���# ��"�� "'"��;�������

����#�����������#��"�� ��"������"#�����

"�#��"#�����"���#"���

�����������������>��"�"#���#������=�#��#���

����#�������#���#������#�#��"#�

� �������"�������#��

�����>�$�� '5�''"�"��#���#"#��#��#����#�"����#�

���� ���#���#��#�������'���#"�������#�

���"�� �#��#�����#���-������� �����������

�*+��#�"������* ����#"#��#��#�"�*������

�'#�������"'"��#"������#���*��#�������� �

#�� �#������� ���*+��#�3"*�"���

������0����5�������7���5��� �07%>

����� �J��*+��#��;��#�*�&������#��

���#� ����#��'��#�����#"������"�����#��)#

&����#��&��'�#�����#"��� ���#"���'��*�"��

'���#"������#�������*�#������ "��#"��������

�����'�#�����*+��#�"��� ����#����*+��#

���'"���#"���9�������"��#������#��"#��"��

��'�� #��������"���'�����"�������"�����#

�������

��������������5>����������*+��#�"

��*������"�����#����������#��������"�#"��

"���"�#�"����*�#�����#����*+��#�����#��

��� "��#"���#��#����#���"#N�������������������

�����#��#����*+��#����� ���� ��&��#�"��#��

����������������#������� ���*+��#� "�&"���

���������������>�$����"#����'�� ���"���

��� "��#"��������*�"���'���#"������* ��"�

*�" �"������ "��#"����)#����"�������&5��#����

����&5"������*" "#"��'������ ���������"#

���#� �#������#"�������"'"��#"������������'

����� ���*+��#�������*+��#�3"*�"�������#

�� #"� �����"�����#�@�����������#"������

���� �����#A������ ����*+��#�#��*����" �

������'����������"�����#�#�����#���

�������������������5�>�$������#��#�* ���

�������"'"��#"���#��#����*+��#�3"*�"���"���

���"���� ����"�#��#����*+��#�3"*�"���"���

����� ����

���������3��5>����������*+��#�"� "�&���#�

���#����������#�����'������"����#����"#�

#���'" ��#����*+��#�"�#����"������� ����"#�

#������ "��#"���#��#����#���"#�������#����*+��#

"����"'"�����"#���'���#�����������

�������#����"��# ��#������#���'" ��"#�"�����

"���#����������"��' ��#���"��#��#���� "��#"����

�� �����������"#����*���� "�&��������� �

�*+��#���*���"���

���������3��5�������������5� ���%>�$����

#��"�#���#���*+��#�'����"������� "��#"���

����������"������#���������#��#�:#���

������"��� "��'���������������������� �

�*+��#���*���"�����*+��#� "�&"���

�����A�������������5�� �;�%>�$�#����� ���

#��#�����#������'�#�����"���"��"� ���'

�*+��#5�"��#���#����� ���<�� ���

�� �����"���"���"#�������������� �#"���

�����A���������������5�� ���%>�B"��

�'#�������� �����#���#��������

������"���"�#������ ���'����* �

������"���#��#�"�� "'"������ �����#��'

��� "��#"�����*+��#��"��#�#"���"�*�������#��

'� ��"����"��"� �<�� ������ �����"��

"���"#���������������� �#"���

���2����>�$����*"�����"#���'

��������"�����""��5�"#"�� �*�"��

��� "��#"������������*������#�� �#�'�

���'"��"���#������� "��#"���#����";��

*�"�������#����� �����;�"����#�

����� ��"�*�" #����#������'"���* ��1�#��&

�����#"���#����� ���������������J����

��� "��#"������"#��#������"����:#���

� "��#,����'���#"��� "#��#������ ��� ��'

���'"���*" "#�������#�*" "#�������#�*" "#��

���2�������������>�)�#���#"�����*�#��

������#��#��:���#��#���*�"���'���#"��� "#�

�'������ �����������"#��'����* ��*�"��

'���#"����������"�#�����#��#��#����� �#'��

"���������#���������*�������"�� �����'"����

��������2,)2���#��&�

���2����������>�$����* ���"�����'�����

#��#�"�����#��*�" ����� "��#"�����*+��#�#���

"�� ����#�* ���'����*�"���'���#"������#�

�"�#"�����"#����*�#����������*�"��

�"��������#�� �����"������#��#��#�������

���"���*+��#������� ���*+��#�

���2�����������>�$ �������� ��� "��#

��������#������ ������"����;��#����

�:���#��#����#"����$�� "��#�������������

������������������� #"� ��"�#������'��

����������� ������������� ��*�

���"��#���#�����"'"��#�&�@'���:��� ��

��&' ���������������#���� "��#"��A�#�

�����#��#��"#"�� ����������J#������#����"#

"'�#�������"���#"�� � ��*���

���2�����2�����6�������������>�$

#����������� ���"��������� ���

Page 227: Cnc - Jdedwards Xe

Glossary

B73.2 (1/98)

�����#���"#��#������"#"��� ���������#

"�#� ��<

� ���J���C�/�/�

� �-��@��8�/A�

� 7����#��2��&�����"#��7����#������

���������9�� �

� %���"#��"�#���#"��������� "��#"��

���#� ,'���

�������������������6��� ��;0%>���'"��

��#������"�#�'����'���"''���#�#����� ��"��#�

�������#��*�#�������� "��#"��������"''���#

��#��������������B��"�#�'����"����������'

���#��'�'���#"����� ����#�����'�������#"�"#��

���������#�#"����'���#��#����#��#���'"��

�����#����#�������

�����������&������������� ��&%>����

��)����� �������� �����*��#���)�#���#"���

�#����������"G�#"���@)��A�"��#����� ��/=���

)#���'"�����#��� �����#������'��#��

"�#�������#"����'������#��������#��&

�;�"����#�

������5������� ��%>������'#����#��#���

���#�����������-���:��� ���$)F�6�/�"��

��"����'��������#"����#���

������>�$�� �#"��� ��B9��'������ ���%��

�����*������"�#���'������#�����"���� ��

��#��#��*����#����������"�#�"��������� #"� �

�������� �#'���

����-����>������"�#�;�����

��3�5�>������ ���*+��#����"�#� ���#�

��&#�#"���"�����&����'���#������ �����#

�����$����&��������*����������#����*" ��'

��#�"� ���&"#�#��#�"��"��#��#���������

�*+��#�'��#��#���&#�#"���������������#��

��� �����#�����#���"�#� �#"������������

'"���#�����)#�"�����"�#5"�5#"���P������#Q��'�#��

���#� ��*+��#����#������ �����#�����

��3�5���������>������"��#���#��#��

���#"���'��#������&��������"#��#��'��� "��#��

�*+��#����"�"���� ��LL��� �����#

���L� ���L��#�I����L���&���L����&���

�����������*�"��#�"�������#�"���#����

�����#����� "��#����*+��#�'��#������&�����"

*��� ��������"�"�� ���'����#���������#��

���&����"�*�" #���#����

4��3�5��2��3�����>���"���#���)�#� �#"��

��&*�����������2��&������&*����

#��'��#������&����"�'���#"���#�* ��'��

#���2 �������#�������#��#�����#���5�� ���

���*����#��������)#�� ������#��#���2��&���

2 �����#�" ������#���' ��#����� �#"���

���������������>�$����'"���#"����'������ �

�'#����#��#� �#��� #"� ��� ����������#�

��� ����"������#�����"�����#����#������

����"���'��#�#"����#�"�"���������� �����#

�������-��� ���� ��� ����"���"����� � �

���#�* ������#�����������-������ �#"��

����#�� ��� ����"���"����� � ���#������

����������#����������

�������>�$����*����������������#��#"��

�������"'��"�����"�#"����"#�������������

����������������#����������#���

���"#"��� �"���#���#�����#� �#�����#"����'�#��

����������������

����(����������>�$�#�����'�'���#��#

����#�����#,��" ��� �#"���"��"����

��� "��#"����������'�������� �'#���#"����'�#��

'�������#���#����"���#��#��"� ������"��

�����#�#"����'�������#,��" ��� �#"���"��

����"��#���#"����'�#���'����"� �������#�"

����"��*����������������#�" ������"� ��

#��������'��#�����" ��"#���"��#���#�������

����#,��" ��'�������#������������

'���#"��� "#��

��������5>�$�#����";���'���"#"*�#"�����#�

#�� ��� ��������#��"#��#��� ������#��� ���#�

#����������������2�#"����'���#������*�

���"���#���"''���#���#�*������������#

�#���

�������>�$���"�#��#�������"'"���#��'��*+��#�

$���#�������"�����#�� ���#�<

/� ���#� ��*+��#�

�� %�� "��#����*+��#�

���>�%�'��#�����"�#� �#"���� ����$�� ���"�#��

#�����������'��"�#� "���������"�����

����#"���������� �����'"���#"����2 ���

��"����������"����"���������'�"�#� �#"���

���#�"��"�'���#"����*��#���#������������"

�������"�����#������" �"�#� �����

���&����

���������6�������>�$������ �

���"�����#�"����"�������������#�����"�

��������#��'�������� �����'"���#"���

������>�����������������#"����#�������

��#�*��������"��������'#����"�����#"���

'���:��� ������42�=�����������"���425.F

��#�������#"����#���������� ����#��

��#�*���

Page 228: Cnc - Jdedwards Xe

XXXX

B73.2 (1/98)

������������������>�$�*���'"#��'�����

�#����������'"���* ��1�#��&������#"���

$�� "��#"���#��#�������������'���"�� ������

*�������*�������������2,)2���#��&

���"#"����'���"�������� �#'��������H3

��#�*���

����������>�$��"��"� ���'��*+��#5�"��#��

#����� ����"����"�����"�� ��������"������

����*������#����'���"�" ������#"�����

�'#�����*+��#��'��"''���#�#����

���������>�$�����"�������#��#�"���#"'"���

��";��������'����"�������"�������*�

���"�������������"���

��������>�$ ���#���������� "��#"���#����

����"''���#�����#"����#�������������

� �#'���

�����>�������'�� #��"�#���"��#�#"���'���

������"#�����#����"��#�#�����"�#������#�#

�"#�� ��������

�������3��>�$��� ���������*"��#"����'

�� ����#��#���";�� ��"���#"'"����������"���

#�* ��

����-����>�$� "#��'�#�* ������������#�

#��#�����������*�"##���#��*���"##���#����

��#��#����"�������������"�#������������#�

��� �#���#�* ����#" �"#��"#��#�����$'#��#��

�����#���"#��#���#�* ���#����#��������

#���#�* ��"���#"'"��'���#����"�#�;�����

���������6�������>�$������ �

���"�����#�����#��#�#���� #�����*+��#��"#�

����������������#�#"�����#����'��#�"�"��

� ����E�����#������#�"����"�����#������

������������"#"����*+��#�#��#��������"'��

������>�$����� �#����"#��'���&��"#���

��'"����#�#������������"����������#�

��'�������������#"����#���������

�"�����1���425.F������$)F��#��&������

*���"��"���"���#"'"��#��#�����)���"�����1��

�������"������"���"�#������'�����:���#�* �

'" ��

��������5�����>�$�'��#���#��#�� ������

#���"��#�#���'���#"����'����������-�

�:��� �������"�����#"���� �������#�

���"'����'�� #�'����#�"��'�������#� �#��

'���#�"����"���"�'���#"����"�#�������#�

���������������"�'���#"��������������'��

��"�������#�

�����������6�������>�$������ �

���"�����#�"����"����������#������� �

�'#����

������>�$��#��'�'��� "G���� �����"'�"��

����������������'#�����������#��&

��� ��"�#���#������#���"##"����������"�"��

"�'���#"���

�������������>�$ ���� �����P9�#�Q�#�* ��

#�"�"�#������#� ������#��*���� "��#���#���#��

����"����%�"������#���P��* "��Q�����"���

#�����#��%�� "��#"���2�* "�����* �

@-=��%2.BA�"���#"'"��� ��'�#�����* "����#�* �

����#��"����"�#�����* "���"��#�����#��"��

��������>���������#��#�"�����"* ��'��#��

��* "����#�* ���������#��%�� "��#"���2�* "��

��* ��@-=��%2.BA�"���#"'"��� ��'�#�����* "���

#�* ������#��"����"�#�����* "���"��#��

��#��"��

�������������>������'�#�������� �

��#����'���� "��#"�����#��#��"��"�"���

��&#�#"�������������"�������#��������

�*�"*���"�������� �J���#���� "��#"��

#�� �������� ��#"����� ��*�"*�������#"'"��

�'�������������#��������� �#"���"������#���

�;��#�����"�'���#"���������;��#�"�"��#��

'����'���������#��#�"���#����� ���#�#�#���

'���#����� ��*�"*��#��#�����������"��

#��#�#���#�����#��%�� "��#"���2���"���������

1�#"'"��#"���#�* ��@-=��%2�1A�

��5�>�����������'�����"������������#�

'������#���#�* ��

���>������� ��������#��'����"�'���#"��

'��������#� "G�������#�����#��������

� "��#�

��������������>�$������#��#�� ����

�#������"�"#�#��#������� ��#�����#���#"�

"�#� �#"����'������ �������&#�#"���

�������������>�$����5#�5������#�����'

��#���� "��#"���#��#���#"'"���*�"*������"��

��������������"������#��#�����* "���#�* ���)'

#����*�"*������"���"���#����"��������#��

��#"'"��#"���"���#��#����*�"*�����"���#��

�������#�#�#���

-��������������� ';�%>�3���#����#�#���#��

�'�����#�" ������"#�"�����#�������'����#��#�

*���"� �����"��#�����#�" �����

-����>�$�#������������#��'������#����#�

����������"#"���#��*���������"��#������

"����"���#���������*�"##����$�;��������

Page 229: Cnc - Jdedwards Xe

Glossary

B73.2 (1/98)

�'��#�����"�#�;������+�*�;�������������

;�����

������>�$��� ��#"����'�� �#����������#"��

'"� ���'���#��#��#�#����#���#��#�����"�� �

��"#��'�"�'���#"���

����������>��#�"����:��#����"���'���#��"�

�� #"� ����#�*���

��������������5���>������#��#�������#

����������#�*���� �#���'���#�����#�*��

���������" �������'���:"#�

�������>�������"'������� ���'#������

�*�#��'�"#����������#�* ����*�"�����#����

#��#�"#�'���#"����#�������� ���������� �#"��

����#�� ��� ��������B! �����B! ���/�

��5��������>������������'������� �

*�"���'���#"�������*��������#���'��

���"'"��#"���@*�"���'���#"�������A�

%������#"���������������������� "��#"���"

�����" �����"#���'��������� �#'���������

����'���#"��� "#��"�������

����������>�3"�&�#�* ��#���#������

'��" "#�#��+�"�"���*�"����"���'�����"����

��� "��#"��������#��%� �#"���"��������#��

*�������"���:��

�������>�$�� �����'������ ������ ���'

��������#��#��#��"��#�*����� "����-���:��� ��

#���#���%� ����B! ����'������"�� ��#�

B! ����B! ���/������B! ����������#"����'���

#����������� �� ���������� ��*���� ����

� ���� ��� �

����������6��>�$����"'"�� ��� ��'������ �

�'#�����$�� ���� ��� �"����"�����*��"�#� "��

��*���� ����������� �"������������

����#���$�� ���� ��� �� ������*��"�#� ��

�"��# �������� ��*���� ������ ����

�������(������������>�$�P� ���Q����#�"�

��+������'���#"��� "#���������P� ��������#�Q

���#�"����������� �#"����'�'":�����

��'�����������������#��*�#�������

'���#"��� "#��

��������������>�$���������� "��#����#��'

#������#� ��*+��#���#��"������������� "��#

��������#��#��������� ���������#������

"��"��#��#����"��#��������#�����*+��#���

���#���

���������>�$�������'�����*+��#����� ����#�* �

"����� �#"��� ���#�*������"���"�� �����"�

���#��� ���#"����$���#��'��� "��#"����#��

�*+��#��������������#��'���#"���'������

#�����'�#�* ��������������� ��#�* ���#�

���#�������������$9�'" �������� "��#�����"���

8��������5��1��� 8�1%>���������� ��7.)

#�� �'������#"�������"'�"�����������"������#

*�#������ "��#"���

��������5>�����������'�"�#���#"����

��#���J����"'"��#"���"�#��������� �����'

����� ��

�������3>�$��������"������������#��*��&�#�

�����"���#�#���'#��"#����*��������"##���#���

��#�*���

�������������>�2��&�����'��*+��#�#��#���

��� �����#����������"���#��#��" ���

����� ��

����������>�$ ����'#��������"#��#���

��#��&��������������#��#��#��" �����#

�'#������"#�����"��"G���������

�;�"����#�������*" "#��#��������"���� ���

�'���'�������*�����"����"��������

�����>�$��� ��#"����'��H3�#�#����#�#��#

��'��������"'"��#�&�

������(�����>�$�#�����'�'�������#������

'������ ��������#���"#�#��#����� "���'"� ��

�����������6��>�$��"��#�����&��� �����

���"������������'�����"#���� "��#"����$

���"#��������#��#������#�������

�"������"#����� "��#"��������������#

'���#"��� "#��

���6��>�2��"���#������#"� �'���#"���'�

'��"�"�����"���#����#��&����@��� "��#A

�������"������������#�'���#"���'����#��&

���"�"#�#���������'�#����'���#"�����

#������'����������������#�����

���������#�'���#"���'��#���'" ���#����)#

������#�*����"* ��'����������#������#��

����"#��#����;�"�����"����������:��� �

�'����"��#�������#��#����� �����"'"��#�&

���*��&����������"����������� "��#"������

��#�*�������

���6���1������������2��3�����>�$

����� ����� "��#"���#��#����"���#������

���"�"#�#���"#���"#� �#�#"#"���*��#�#��

"�#��� �'���#"����'������ ��

���6���2��3�����>���"���#���)�#� �#"��

��&*������������������&*��������"�

#����������'"���#"���'" ��'���#���2 ����

��#�������#��#�����#���� �������*����#�

Page 230: Cnc - Jdedwards Xe

XXXX

B73.2 (1/98)

������)#�� ������#��#��������2 �����#�"

�����#���' ��#����� �#"���

���6���>�$�#�����'�9"���'#��"�����1�

�����#��#�������#��;�"���������#��*�

���������#��#�������#"����#�����:��� ����

+����#��:������+��;����:��

���6��>���� �#����"���������5*����� �#"��

����#�������#�����* �������# �

���"�#����"#����"������5"���������"���

"�� ��"���"��:#��"* ���"�#"���� �#"���

��� �#�����*+��#�#��#����'���#�������"'"�

"�#�'����#��#�����*��� ������"�#��������5*���

�������� �#����#��#����������#���� �#���

#��#���� "��#�

���5��E���������������� �;0�%>�$�

�����"���������"����"��������� ���*�#"�

�����#��"������#���*������*�#���9�#

��#��� ������������������ "������*�

�����#����"�����"�� �5*�#�������#���#�

���3�>�$�������"��#"���������"�#�#�����

��"��������� "��#"������������"������&�#

�'���#����������#��&��$ ��&�������B�& ��

���&�#������ �����*��#���.�"��"#���'

�� "'��"���#�B�& ���

����������������-���� �18%>�$����#��"��#��

$�,6�����#�*�������'���;��#"��

���"'"��#"���#��������������'#����

���������������5�>���������"'"��#"�������

"�����"����'�#��������<��*+��#�3"*�"��

������?�"���3"#��������������#� ��*+��#

���������������* ������#���

���"'"��#"����"#����#��#��#���������"�������

� ����

������������������7��5��2��3�����>

��"���#���)�#� �#"�����&*����������

����"'"��#"�����* ��9������&*��������#��

*�#������ "��#"���#��#�����#��#������"'"��#"��

#�* ��

������������>�$����� �#�����"�#"����'��

����� ���*+��#��������*+��#����"#����

���"'"��#"��������������"���"�����#��*�" �

��� "��#"���

������������>�$����"�#"����'�������� �

�*+��#����������#�* �J��"�#���������#��

� ������#��'�'"� �������'��#�����

����>�����'���#"���*����"���#����#���#��

�����#�����#��#�#�����"#�����"���

�������>����#�����"�#"���#�:#�#��#������

��:#�#�������#� ���"�* ����'"� ��������#��

��"�* ����'"� ��"����* ����#���#�#"��#�:#�"

* ��&N������#�����"�* ����'"� ��"��"�* ����#��

#�#"��#�:#�"�����

����A���A�������>�$�#����#"�����#����#��#

� ������ "��#���� "��#"���#����'�����&�����

�#��� �#��#"�������� �#��#��#���&�*�

������#"���#����������� "��#"������"��'#��

"��� ����� ���"�����#���"�"��������� "��#�#���

���������� ��*�#��5�'5����"����"�#����"��#

������#�

���������-��������5��5�� �'�%>�$�'��#�

�����#"��� �����������������"���#�

#������'��� �#"��� ���#�*���������)#�����*�

����#�����#����#�*�������#���#"���������

���"'������� �#����#��'�����#�*�����H3�"

��#������� �#��������"��� ��������*�����

"#�������#����#�"�����#� �' ��� ��"��

����������>���������#��#�"�����"* ��'�

#����� "��#���������'�����* "����#�* �������

�������"���#"'"���"��#�����*�"*����* ��

���������������>�������*�"*��#�* �

@-=��%�.BA����"���"�#�������#���2�* "��

������"#��#�����#��%�� "��#"���2�* "���#�* �

@-=��%2.BA�"���#"'"��� ��'�#����*�"*�

����"���'���������* "����#�* ��

�������>���������#�#"����'���#���

"�'���#"���"�������� �#"�����#�#� ���������"�

��"�����#��'�#�����#�" ������*�����������

9�����#����''��'����������#�#��#

����"G��"�'���#"���#����"����#�"��#�* ��

���#�#��"#����#�" �

�����������>�$���#�����'����"��������

"����"��������������#�'"�"��*�'���#��

��:#���������*��"��

�����>�$�������'�� �#������ "��#"��

"���#"'"���*����������������#���������-�

�:��� ���#���$����B��&��#��������"��/�

$ ���� "��#"����#�* �������������"#�"���

�#�������*��"���#"'"���*��#����#��������

�����������������>����������������

�����#����'���#�&�������"���"����

���������"�#�"�����"#��

����������>�$������#��#�"���#"'"�����#���

'���:��� ����/�'��#���$����B��&��#��

���� /�'��#��������- ���9��������#��#���

Page 231: Cnc - Jdedwards Xe

Glossary

B73.2 (1/98)

�������������>�$����������� ������"���

*������� ������" �* ��#����� "��#"������

���#�'��'�#�������"���

����>�)����#�*������"�����#���

#��5�"���"��� ���#"#�����������'�������

�� �����$ ����"�� ���#��"������#�*�����

#����"��#�* �������� ��'" ��

����>�$�#��5�"���"��� ���#"#�����������'

��������� �����$ ����"�� ���#��"���

��#�*������#����"��#�* ���$����"����#�* �

���#�"����������'�� �#���"�'���#"����$�

�:��� ����� ��*���������"�������� ����

#�* �����#�"�"���#���1�����$�����2����

1��*���$���������� ����'������� ������1���

"�����:��� ���'����� ����"��#������ ����

#�* ��

����>�$�'" ��"������� ���'#����

����������������5����� �17%>����

����� ����������#�#��#����� ��#���#����

�����#"��� ��'������'"������#����$9�#��

"�'���#"�����������#���"�#"�������'"�"#"��N

��� "��#"����������#����"'"��#"��N�����#

� �N�#�* ����'"�"#"��N�*�"���'���#"���"���#

�����#������ "*���"�'���#"��N�������#�

#��#�����'"�"#"���'�����"������ "��#"���

���#������*�"���'���#"���

��������6������>���"��������������

����#���#�"������������������ �

#����"�� �������� "��#"���#�* ��#��#���'���#�'�

#�������� ����

������0��6�������2��3�����>���"���#��

)�#� �#"�����&*�������������* �

�����"�����&*��������#���#�* �

�����"���#��#��������#���#����"�� ����

��� "��#"���#�* ��#��#���'���#�'��#������

� �����'������ ���)#�� ������#��#�����* �

�����"����������#� ���#�" ������#�

�' ��#����� �#"���

����������5��1��� ��1%>�$������ ��7.)�#��

'�����#"�������"'�"��������"���������"�#"��

��#�*���#�* ��

������6��������>�.��#�* ������#�� ��#�

�##������#�*���#"����@�������A�#��#

��#���#"�� ������������������#"�������

���"�#�#���#�* ���$����#"������"�#���#�* ��"

�'����#�����������#��������������#���

����� ����#�*���#"�����������#�'"#

��#��"�����"�������#��" ���#"��#��#���#"����

�������������#�%� ����"���#�����#��#��

#"�����$ #����������� ��� �������#�� �

#��*���##������#����� "��#"�������#��#�"

'���#"��� "#��"���� "��#"������"'"�����* ������#

� �����"�����*������ ��"���#�#���#�* �� ��� �

�04(&4>�����""������#� �2�#��� ,)�#���#

2�#��� �������"�"�� ���2���#��� ���

���� �������������#��"�#�������#���#��&

�"���������"''���#�#�����'�#���""��

��#�������2����"���������#���#�* "���

������#"���*�#����������#���'��#���� "�* �

�� "�����'�������������#��

�04(&4����6�������>�.���*������#"�� �

������� "��#"���#�����"������#������"��

#�������"���"�����#�����"����������#

���*����#�*�����" ��&�������#��#���

��� "��#"����������������;��#�"#�*�������

������������>�$�#�����'������ ����#������

#��#����#�"��"�'���#"����*��#���������� �

����#��

��������������>���* ������'��#����"��

������������"�#� �#"���������������'

����� ���"�����#�#��"#��#�* ������*�

��� "��#"���

�����>�$�#��"�� ���� �#"�����#���

'�;���# ���������#���)�#���#�#��#�� ����

���#�� ���������������������'��������#�

�����#����� ��#�"���#��'��#�����2,)2

������"��#"���

�����6�������>�$������ �����"�����#

����� �����"#��#������'������%����2" �#

���"�����#�#��#�#������ ���'#������#��

���"'"��#"��������"��#������� �����#���#�

�����*�'�������� �����������#��#������

���

�����5������������5��5�� */�%>�$

������"��� ��������#��#��;�"����#�" ��

"�'���#"����*��#�����#������ �#����#�&�

�:��� ���'� 73������B�3�����2��� ����

-�%�%$1�

����E���>����"*���#����'#����#��#�"

����"�����+���#"����"#��������������'#����

�3��>�$�*"#����'"���#"����"�� �#��������

��&#�#"������"��� �#���&#�#"���������#�

#��#�����#��&�

�3������5>�$�3$1������������"��"����"��

� �#�#"����##������#����*����"#�'����*�����#

#�&���#��*�������#��#����*�'���#��������* �

#��#���"#��4�������#������#�&��5��"��

#����� ����"�"�������"�� �"����#�����:#

Page 232: Cnc - Jdedwards Xe

XXXX

B73.2 (1/98)

���"�"���#�#"����"��#���#�*��#�����:#����"��

#�#"���

�4�������>������#"���2���"������"#���$

���"#��#��#����#� ���#��#��'��*�#����� ���

�������#��#��"�� �����#������ "��#"���#��#

�"�"��#���#������2����"#��� ����#��#���#�

"�#��"#��"��#����"#"*�#������"�����#��������

"�� ����������#��#��� "��#����#������'���#

#��"�� ������

����>�$������#��#��� ��#�����

#��* ����#���* ���

��55��>�$ �������#���##������'�� #�����"��

#������#��"#���"��#�����#���"�#"�����������#��#

��#��"#���"�������������� "��#"��������#�

#���#"����"�"���&���*���������#����"�#��

�"#��#�����#��"#��������� ��� �����#���

�"�� ��"#�#"���<��� �� �#����� ��������

�����'���

����������������>������'�#���#���#�����'

"�#� �#"������������#����"��#���)�#� �#"��

2 �������� "��#"����$�#��"�� �"�#� �#"���"�#��

;�"�&�#�����#�����#�����"�#� �#"���� ���

*������"#����� ��'�#����������������'�� #

"�'���#"���'�����"�����#�������#�������

����� ����#���"�#� �#"���

������������������������ .8�%>�1����#��

������'����������#����#���)�#���#�����

"�#���#������'� ��"���"�����:��� ���'

.%3<�##�<,,����+��������������"�"�����

������)�#���#������

���������:��>���#��#��#�"����������� ��#"��

�'���#��� ����#��"#������#"������������

��##����#�������#��$ �����1��� "G���

����>�����������'��'��"�������� �

�'#����#��������� ���� ��� ��������'��

B! ���#��B! � �

�5����>�����������'��'��"�������� �

�'#����#��������� ���� ��� ��������'��

B! ���#��B! � �

����>�$��"��"�"��� ������������� �

�'#����

������������������ .�0%>�$������#��#���

������'"�����"�����������"�#"���������"��

�� "���� �����:��� ���'������������

��"#5�'5������������#�#�����������

��� �����#���������

��������������������>�����"���#"'"��'���

#�* ���'�������"#��������"���#��#�������'"��

'��#����#�������������'��#�������������

�����#�* ��"��$����B��&������� �

���"��������*���'�#����#�* ������� ��

����#�����#��������'"���#�* ���'���������

.������������0��������5�>�����.����'"���

����������* ��������#���J����"'"��#"��

#��#��������'"���������#�* ���"#��#�����#�

#��#���������"��������� ����

����������������������>�$��#��'��� ���#��#

�����#�����J���'���� �����������#�

'���#�����"�� �'���#�������#�������#�

���"'"��������#"���

.�����6�����������5�>�����.�����"��

�������������������"��������"�#���

��#���J�������"���#�* ��

�����������>���������'"���������#�"#"�

�;�"���'��������������������'" ��"�� ���

�� "*��� "#����'�� #��"�#�;������������'�� #�+�*

;���������� ������� ��#��������#�"#"��

)���������������5�>�����?�"���3"#�����

�������������5F�����������5D������"��

���"'"��#"���'���*+��#�#��#������ "��"��#��

����� �������� ���#��"�����"�����#"��

��#��

6�����������>�-���#��#�����*��"���&���'����

���#� �#���"#�#������"����#��"�"������#

��#��*� ����"��#������#� �

6�����������6�������>�$�'��#���#��#��������

���#�����"���'"� ����������� ����#"# ��#�:#

���'����������#�

�����F>�)�#��� �#�����'����"��������#���.��

'���"#"�����#�* ��������'��"�#���#"���

��&�#�

2��������>�$�����&#�#"���#��#����#�"����

"�#���#�*�����������*�� "��#�������"��#�

�"#��#�����*�����'������� ����#��

2������6��>�$�����&#�#"���#��#����#�"��#��

)�������"�����H3�������������������

��� "��#"��������)�#���#��"�� ������������*

�������"�����#��'���#�����*�� "��#�����

����#����;��#�#��#�����#��"������

�����#�����#��"������������#��

"�'���#"����"#�����"#�*��&�#��#�����*�����

����#�����*���������"#�*��&�#��#�����*

� "��#�

���������������3� 21 %>�$���#��&�#��#

�:#����*������������������*��#������"��#��

������"��#"��� "����'���3$1�����"�����* ���'

Page 233: Cnc - Jdedwards Xe

Glossary

B73.2 (1/98)

����"��� �����"#������)#�"��"#"���"����*��#��

�;�"����#�#��#������������������

#� �������"��#"������"���*����#��'�#��

#���""���

���3����>�$����"���#��#�����&' ��

9��������#���� "#"������ ' ��������P#��

��#���#"����'���*�"���������"����� ���

��#����"�����"����������#��"�'���#"�����

#�&���������'���������#"�"���#�#�����#��

'����#"���������"���#�����#��'��������

� ��Q�

���35�������6��>�$����#����#�*������

��� �����#�"�"����*�#��'���#���� "��#��

'�������#����#�*����������"��������

��#���'������������� "��#"�����*�#��

����"����)#�������������#����������� �

���"���@"������#���� "��#����#�A�

2������������1���������>�����*���

���#����'���� "��#"�����"������

������"���#����� ����#��#��������������

#�����"������"'��"#������"#�������������� �#�

"�#���#"���#�������#�"#��'#����

2���������2��>�$���#��'�#���)�#���#�#��#����

#���"#�#�:#������"������"��������"��������

�� ��"�����*�� ���� "��#�#�� ������ ��� ��

���#����� "��#"���

:�����>�-��#�������'�����@��#��&

�"������#��A���������� ��#��5���5'����

��� "��#"�����'�����"#����#�#"����#�����

�#����"#"�� �"�'���#"���#��#���#�*���� "��#�

�������������$'#��#���"�"#"� ���"#���

���� �#�������� ��#���#���#����#"���"�

��&�#�* �����#�����&#�#"�����������&

#�* ������� ���D�'" ������������#��&

������#"���"��#�* "�����D�'" ������� �����

#��#�����#��"����������#���#����#"�����

��"#������"��*������#��*�"���'���#"�������

��#��*�"���'���#"����" �#��������#��#��

�����"������#����#"���'" ��

Page 234: Cnc - Jdedwards Xe

XXXX

B73.2 (1/98)

Page 235: Cnc - Jdedwards Xe

B73.1 (8/97)

Index

A

$���"*" "#�����#�*���'����������!0��

$��"�����������#�������#��#���$�,6���

60/8

$��"���������"�����#��60�

$��"�����#��������80/>

$��"���������#���������08

$��"�����9��"'�"�������#���������80/>

$��"��������#��#���%� ���,��#�������

9���#�* ��@-��=6�A��80�>

$��"�"#�"�����#�������-����

����"���#�&��!0/>

$�� "��#"������� #��#��/0

$�� "��#"������� �����/0

$�� "��#"��� ��������1�#��>0�

$�� "��#"��� ��"�����#"#"��������

*����"��� 08>

$�� "��#"�����+��#� ������/0

$�,6��

���"�����������#��������60/8

���:"#��������"���#"����608

��#������

����"����80/�

�����'�����:"#�������0>

����#"������������"#�������

���"�����#��60/6

B

B�#���'" ���60/

B�#����'���������"��

����"����!0>

#���

�� "���������!0�

�*�#����!0!

B�"�����#������� ���"����!0/=

B�"���'���#"���'�" ���� 0>

B�"���'���#"��

��#��*�"���'���#"��

�"��#5������#����"�����#��!0/�

�:��� ��� 088

��* ���������*��'�" ���#��������#�#�

#��������'�" ����#��������������

0>�

����"�����* ���� 0>/

*�"���'���#"���'�" ���� 0>

���������#��������������*�"��

'���#"���'�" ��������� 0>

B�"��5��#����#������������"����80>

C

���������#��������������*�"��

'���#"���'�" ��������� 0>

����"������#���#�* ������"��������"���

80!

���#� ��*+��#���#��������#�"����80=

���#� 5�*+��#5���"'"��#"��5*�5��#�5����

��#������������"����80�

�����"�������"���'���*+��#�3"*�"��

#�* ��� 0/�

�1�����"�"#�#���/0

�1������ #��#��/0

���:"#���������"���#"����608

������"��#"��

�����5*�����>0

�"�� ������>0/

��&�#5*�����>0

���'"���#"��

�#���� �������0

��#����0

��B���"����60/6

#��"�� ����'"���#"�����0/���0

���#� 5��* ����#����������'"�"#"����80>

����"���������"�����#��60//

����"����������"�����#�#��������#�

������60/���60/

���#����9�%�����'��B�"���-���#"��

���#�� 06!

���#"�������#���������'"�"#"�����0!

���#"���#�#�*�#���'" ���60/

��#���� �#"������� #��#��/0

��#�������'"���#"��

�#���� �������0

Page 236: Cnc - Jdedwards Xe

XXXX

B73.1 (8/97)

#��"�� ����'"���#"�����0/

����#���"�����#���������0�>

����#���"������"�����#���0

D

��#������'"���#"�����0

��#������ ��"���"#"*�#"���

���������#"����!0/�

��#��%�� "��#"����������3���#�* �

@-=��%3�7A��80//

��#��%�� "��#"���2���"���������

1�#"'"��#"���#�* ��@-=��%2�1A��80//

��#��������9�#�������"���%���#

@%=�>//�A

����"�����#"����80 �

���"���#������#��80 �

�##"��������#��� ��#"����80 �

��#��������9�#��%���#�@%=�>//A

����"�����#"����80 �

���"���#������#��80 6

�##"��������#��� ��#"����80 6

��#��������9�#��#�* ��@-=�>//A

��#��������80

����"����80/�

��#������

���"��������"'�"����80/>

$�,6��

���:"#����������0>

����"����80/�

B�"��5��#�������"����80>

���#� ��*+��#����"'"��#"���*����#�

����������"����80�

���#� ��*+��#��#�"����80=

���#� 5��* �����'"�"#"����80>

��#�*�����#������������#���"���

80

��#�5�"�#"����5*�5� ���������"����80!

�"#"*�#��5����"��������"����80>

��� ������"����80>

��"����#������������#���"����808

���"'�"���� ���,��#�����������#�* ��

80�8

����������"����806

���"���������#"����80/8

�*+��#5 "*�"��5*�5� ���������"����80�

� ���"����80/

����"�����#"����80�6

�� "��#��5 ��� 5��#�������"����80>

���#

���"����80�=

�##"�������"�����#"����80�=

�;�"�����#�������#���

$�,6�����#��������808

B�"�����#���808

���#� ��*+��#�����"'"��#"����808

���#� ���* ���808

��#���"�#"������808

�"#"*�#�������"����808

3��� ��808

�*+��#�3"*�"����808

�� "��#��� ��� ���#���808

�����9����808

��#����808

����#���"����808

?�"����808

�����9�����#������������"����80=

����

���#�����"�����#���0=

.1)F���06

�"�����1����06

�"�����1������.1)F���06

"G"����80�/

��#�����#������

+���"�"�'" ���##"����80�

����� ���:��� ���80!

����"����80!

#��"�� ���#������������#���"�����0�>

����#���"����80

��"'�"���'����������#��������60/

?�"�����#������������"����80//

��#�*�����#������

����"����806

����#���"����80

��#�*��

����"*" "#���!0��

�"�� ������"����80�6

����������"����806

����#"���#�����#�*����!0��

��#�5�"�#"����5*�5� ������#�������

����"����80!

�� �#"���������"�����#��60/>

�� �#"��������"��#���%� ���,��#�������

9���#�* ��@-��=6�A��80�!

���� �����#��������"�����#���������06

�"� ���B�:�������-��

Page 237: Cnc - Jdedwards Xe

Index

B73.1 (8/97)

�"��#5������#�����"��

���"�����#

��#����#�����"�"#�#"����!0//

#�#��"�����#"����!0//

���#"�����#��*�"���'���#"����!0/�

����"����!0

����"�������*+��#�����"����!0//

���������#"����!0/�

�##"�������!0/�

�"� ��������-��

�"#"*�#��5����"�����#�������

����"����80>

���� ���"���*�"�����#���!0/=

���� ���"���#����"�� ���#���!0/>

�"��

���'"��"���'����B����#��������60/6

��#�*����"�� ������80�6

E

��#�"���#�������'�����#����#"���

!0��

��#�"���#�* ��������#�������"G"����

���"���"�'���#"����80�/

���"�����#���#�" �5������ ��#�* �

@-��=6/A

���"���������"�����#��60�

���#"����'����"�����#���'"�"#"����608

���"�����#�9�#��#�* ��@-��=6A�����"��

������"�����#��60=

���"�����#

���"������"�����#��60�

���:"#��������"���#"����608

����"������"�����#��60//

����"���#����������#��������60/���60/

�� �#"������"�����#��60/>

���#"����'����"�����#���'"�"#"����60

���#����������#���������0=

�#����60/

����#���"����60 ���0

����#���"������"�����#��60

����#"���#���$�,6������������60/6

������� "��������"�����#"���"�

�*+��#����'"���#"���9������� 0�

F

-�" ����#��������������� 0>�

-��

���� ������"'"��'�������

�*+��#�9���"���%��""���� 0/8

2�#�������%��""�����0�

%� ���,��#��������9����80�!

%� ���,��#��������9���%��""����80�>

%��"���3���#��������� 0/�

%��"����* ��������#�����������"���

80�

%��"����* ��������#���������"G"���

0����80��

��&��"#����#���������80/!

G

7���"��#�:#������"���� 0�6

H

4���������"�"#�#���/06

4���������� #��#��/06

I

)�#� �#"��������#���"�����#���������0

J

����)1)�'" �

T�B��E���9�����)17��5�����1�$%EU�

#�������'������##"����!0�/

T�B��E���9�����)17��0�����1�$%EU�

��#�����#�������������#"����80�

T�B��E���9�����)17�U

#�������'������##"����!0�/

��#�����#�������������#"����80�

��"'�"���#�������'������##"����!0�/

���B��

��#�*����"�� ������>0/

�"�����������808

Page 238: Cnc - Jdedwards Xe

XXXX

B73.1 (8/97)

����#���"����>0>

���1�#

��� "��#"��� �����>0�

������"��#"���#���

�����5*�����>0

��&�#5*�����>0

������"��#"����"�� ������>0/

��#��&�����#����#� �����>0�

�����

&��� ��>08

��#��&��>06

����#���"����>0�

��*����#� ��#�#��9�#��#�* ��@-=�>//�A�

80//

��*�9�#���� �#"���B������� �����#

����"�����#"���� 06=

���"���#������#�� 06�

�##"�������"�����#"���� 0��

�##"��������#��� ��#"���� 06�

��*�1��*��9�#��#�* ��@-=�>///A��80//

K

C��� �����1�#��������>08

L

3"*���3"#����#� �#�* ��@-��= A�� ���#"��

�'����"�����#���'"�"#"����606

3"*���3"#�9�#��#�* ��@-��=6A

����"���������"�����#��60/�

���#"����'����"�����#���'"�"#"����606

3��� ���#������������"����80>

3���#"�����#��*�"���'���#"����!0/�

3��"����#������������#���"����808

M

9���"�����������#��&�����"��������

����"����806

9�&"�����#�*�������"* ��#���������

!0��

9���"��

�����"�������"���'���*+��#�3"*�"��

#�* ��� 0/�

����"��#�:#�� 0�6

�*+��#�� 0/�

9�#��*�"���'���#"��

�:��� ��� 088

���#"���"�����"��#5������#����"�����#�

!0/�

9�#����#�����"�"#�#"������"�����#�

����"����!0//

9����5*����������"��#"����>0

9"�� ����

�"���'����#�*����"�� ������80�6

���B��

��#�*����>0/

����#���"����>0>

���1�#

������"��#"����>0/

����#���"����>0�

����"����>0/

9��"'�"�����#��������80/>

9��"'�"���#�* ��������#�������"G"����

���"���"�'���#"����80�/

9��"'�"���#�* ��'��#���������#�������

�0/�

9��"'�"���#����*+��#�3"*�"����#�#����#�"

#�* ��@-=�>/A���0/�

9��"'�"���#���%� ���,��#��������9��

��* ���80�8

9��"'�"���#���?�"���3"#�#�* ��@-=� �8/A�

�0/�

N

1���

��#������

������#"����80/8

����"����806

��#�*��������"����806

��#��&�����"�������������"����806

1�#��&

���"�"#�#���/06

���� #��#��/06

���1�#����#��&�����#����#� ����

>0�

���1�#��������>06

Page 239: Cnc - Jdedwards Xe

Index

B73.1 (8/97)

����"�������������"����806

O

�*+��#����'"���#"�����������#

����"�����#"���� 0�=

���"���#������#�� 0 �

�##"�������"�����#"���� 0��

�##"��������#��� ��#"���� 0 =

�*+��#����'"���#"����� �#�����#

����"�����#"���� 0�=

���"���#������#�� 0 !

�##"�������"�����#"���� 0��

�##"��������#��� ��#"���� 0 �

�*+��#����'"���#"���7 �*� �.���#�����#

����"�����#"���� 0�=

���"���#������#�� 0 >

�##"�������"�����#"���� 0��

�##"��������#��� ��#"���� 0 >

�*+��#����'"���#"���9�����

�:��� �

��� "��#"����;��#�'����#��� 06

��� "��#"����;��#�'�� ��"��� 0!

����"����*+��#�� 0/�

����"�����#"����������� "���� 0�

���"������#�� 0�!

����#���"���� 0

�*+��#����'"���#"���9�����������

@2=�>//�A�� 0/�

�*+��#����'"���#"���9������#�* �

@-=�>/�/A

����"���������"�����#��60/�

���#"����'����"�����#���'"�"#"����608

����"����80//

�*+��#����'"���#"���9���"��������"��

���#

����"�����#"���� 0�=

���"���#������#�� 0 6

�##"�������"�����#"���� 0��

�##"��������#��� ��#"���� 0 6

�*+��#����'"���#"�����#�����* ��.���#�

���#

����"�����#"���� 0���� 06>

���"���#������#�� 068

�*+��#�3"*�"���������"�������"���� 0/�

�*+��#�3"*�"���5��#�#����#�" �#�* �

@-=�>/A�����"'�"���#���#�* ����0/�

�*+��#�3"*�"�����#��������#�"����80=

�*+��#�9���"���%��""���'��������"��

�*+��#�� 0/8

�*+��#�����"�����"��#5������#

���"�����#��!0//

�*+��#������)�������"����806

�*+��#�2�#��9�#��#�* ��@-��=6�A���0 ���0!

�*+��#5 "*�"��5*�5� ������#�������

����"����80�

�*+��#������"���� 0/�

��9���#�����.���#�,�� �#�����#�

���"���#������#�� 08�

��9�����"������"'�"���'����������#�

������60/

��9�9���"���#�* ��@-=�>/�/A�����"�����

���"�����#��60=

��B���"�������'"��"����60/6

����� �

#��"�� ����'"���#"�����0

����#���"�����#���������0

����#���"���� ���/0

��� �������#"���#��������#��#�* ��� 0/=

���"���"�'���#"������#�"����

���"'�"����80�/

P

2�#"#"��"��

��� "��#"��� ��"���������� 08

����*����"���"#����� "��#"��� ��"��

08>

2�#�������9�#��#�* ��@-��=6�A�� ���#"��

�'����"�����#���'"�"#"����608

2�#�������%��""�������#"�������#������

��'"�"#"�����0�

2�#���������#�����0/

2�#������

���"���������#���������08

���"���#��#���$�,6����60/8

���#"�������'"�"#"�����0!

���"'�"���#�* ��'��������#�������

�0/�

����#���"����#���#"�����06

����#���"���"������� ����0

����#���"����"#������ �����#���06

����#���"����"#��"�#� �#"�����0

2 ���"�������� ����#���������80/

Page 240: Cnc - Jdedwards Xe

XXXX

B73.1 (8/97)

2�* �������"���*�"���'���#"���

0>/

*�"���'���#"���'�" ���� 0>

���������#��������������*�"��

'���#"���'�" ��������� 0>

'�" ����#��������������� 0>�

2���"����"��#5������#

���������#"����!0/�

�##"�������!0/�

2���"�����#"��

���#����9�%�����'��B�"��

-���#"���� 06!

��#��������9�#�������"���%���#

@%=�>//�A��80 �

��#��������9�#��%���#�@%=�>//A�

80 �

��#��������80�6

�##"���'�����#��80�=

���"�����#�9�#��������@2��=6A�

60/>

��*�9�#���� �#"���� 06�

��*�9�#���� �#"���B������� �����#�

0���� 06=

�*+��#����'"���#"�����������#�� 0���

0�=

�*+��#����'"���#"����� �#�����#�� 0���

0�=

�*+��#����'"���#"���7 �*� �.���#�

���#�� 0���� 0�=

�*+��#����'"���#"���9������� 0�

�*+��#����'"���#"���9���"��

�����"���%���#�� 0 �

�*+��#����'"���#"���9���"��

�����"������#�� 0���� 0�=

�*+��#����'"���#"����#���#�* ������#��

068

�*+��#����'"���#"�����#�����* �

.���#�����#�� 0���� 06>

��9���#�����.���#�,�� �#��� 08/

�##"���'���*+��#����'"���#"���9�����

���#�� 0��

?�"'���*+��#����'"���#"���9�����

���#�� 0�!�� 06

2���"���#�������'����

*�"�����#��#�* ���!0�!

���� ���"���*�"�����#���!0/=

���� ���"���#����"�� ���#���!0/>

��#�"���#����#"����!0��

��&"���#�����#�*�������"* ��#�����

����!0��

�##"�������!0/6

�##"���"��#���+���"�"�'" ���!0�/

#����"�� ���#��#�* ���!0�6

����#"���#������������#�*����!0��

�� ���"���#����#"����!0�

2���"���#���

*�#����'������!0>

�"��#5������#��!0

#�������'������!06

����#���"����!0

G��5� "��#��!0�

2���������)�

���� ������"'"������������

���"�����#�9�#��@2��=6A������"��

��#"����60/>

�*+��#����'"���#"���9������@2=�>//�A�

0/�

%���"�������������@26��6DA��!0!

R

%���"�������������@26��6DA���� "��

���������"����!0!

%� ���,��#��������9���#�* ��@-��=6�A

���"'�"����80�8

�"��"���������80�8

%�� "��#��5 ��� 5��#����#��������80>

%���#

��#����������#���##"�������"��

��#"����80�=

�*+��#����'"���#"���9��������##"��

����"�����#"���� 0��

���"���'����#��������80�=

%�;�"�����#�������#�����808

%��"����* ��������#���������"G"���'���

�����"������ �������#��� 0��

%� �

��� "��#"������� #��#��/0

��� "��#"������� �����/0

��� "��#"�����+��#� ������/0

�1�����"�"#�#���/0

�1������ #��#��/0

��#���� �#"������� #��#��/0

����������"�"#�#���/06

����������� #��#��/06

��#��&����"�"#�#���/06

��#��&����� #��#��/06

#�"�5��#�����"�"#�#���/06

Page 241: Cnc - Jdedwards Xe

Index

B73.1 (8/97)

#�"�5��#������ #��#��/06

����#���"���'������� ���/0

%���"������#����9�%�����'��B�"��

-���#"������#�� 06!

%���"�����#��������9�#�������"��

%���#�@%=�>//�A��80 �

%���"�����#��������9�#��%���#

@%=�>//A��80 6

%���"�����#��������%���#��80�=

%���"�����*�9�#���� �#"���B������� �

%���#�� 06�

%���"����*+��#����'"���#"�����������#�

0 �

%���"����*+��#����'"���#"����� �#�

���#�� 0 !

%���"����*+��#����'"���#"���7 �*�

.���#�����#�� 0 >

%���"����*+��#����'"���#"���9�����

%���#�� 0�!

%���"���#����*+��#����'"���#"���9���"��

�����"������#�� 0 6

%���"���#����*+��#����'"���#"�����#��

��* ��.���#�����#�� 068

%���"���#�����9���#�����.���#�,�� �#�

%���#�� 08�

%���"���#���?�"'���*+��#����'"���#"��

9���������#�� 0 =

%��#"��������#���"����"#����#�������

�06

S

�����������-��

�����9�����#������

����"����80=

����#"���'��$�,6����60/6

����

*����"���"#����#"#"�������� "��#"��

��"��� 08>

��#"#"��"������ "��#"��� ��"��� 08

��##"�������"�����#"���'����9����#�

0��

��##"��������#��� ��#"��

��#��������9�#�������"���%���#

@%=�>//�A��80 �

��#��������9�#��%���#�@%=�>//A�

80 6

��*�9�#���� �#"���*������� ��%���#

@%=�>//��A�� 06�

�*+��#����'"���#"��������%���#

@%=�>/�/A�� 0 =

�*+��#����'"���#"����� �#��%���#

@%=�>/��A�� 0 �

�*+��#����'"���#"���7 �*� �.���#�

%���#�@%=�>//�A�� 0 >

�*+��#����'"���#"���9���"��

�����"���%���#�� 0 6

��##"�������"��#5������#�����"����!0/�

��##"������#�������'���������"���

!0/6

��������#�����������#�����"�����#�

�0=

�"G"�������"'�"���'����#��������80�/

���&�#5*����������"��#"����>0

�#�������'���������"��

���"�"#�"���#�&��!0/>

*�"�����#��#�* ���!0�!

���� ���"���*�"�����#���!0/=

���� ���"���#����"�� ���#���!0/>

��#�"���#����#"����!0��

��&"���#�����#�*�������"* ��#�����

����!0��

����"����!06��!0/

�##"�������!0/6

�##"���"��#���+���"�"�'" ���!0�/

#����"�� ���#��#�* ���!0�6

����#"�����#�*����!0��

�� ���"���#����#"����!0�

��"'�"����##"���"��#�������)1)�'" ���!0�/

�#�"�����#���������*+��#�3"*�"������

���#� ��*+��#��80=

�#�#��"�����#"������"�����#������"���

!0//

��#�����#������

����"����80!

������#"���#������� ���80!

+���"�"�'" ���##"����80�

����"����80!

��#���#�* ������"��������"����80!

T

��* ������"����80!

��* ������������"����806

Page 242: Cnc - Jdedwards Xe

XXXX

B73.1 (8/97)

��* ��"G"������#�"��������"'�"����80�/

��* �

*�"�����#��#�* ���#�������'����

����"����!0�!

��#��%�� "��#"����������3��

@-=��%3�7A��80//

��#��%�� "��#"���2���"���������

1�#"'"��#"���@-=��%2�1A��80//

��#��������9�#��@-=�>//A��80 ��80/�

���"�����#���#�" �5������ �

@-��=6/A��608��60�

���"�����#�9�#��@-��=6A��60=

��*����#� ��#�#��9�#��@-=�>//�A�

80//

��*�1��*��9�#��@-=�>///A��80//

3"*���3"#����#� �@-��= A��606

3"*���3"#�9�#��@-��=6A��606��60/�

���"'�"���'����������#���������0/�

�*+��#����'"���#"���9������@-=�>/�/A�

608��60/���80//

�*+��#����'"���#"���9�#��#�* �

@-=�>/�/A�� 0//

�*+��#�3"*�"���5��#�#����#�" �@-=�>/A�

�0/�

�*+��#�2�#��9�#��@-��=6�A���0 ���0!

��9�9���"���@-=�>/�/A��60=

2�#�������9�#��@-��=6�A��608

%� ���,��#��������9���@-��=6�A��80�8

#����"�� ���#��#�* ���#�������'����

����"����!0�6

.����'"��������������@-���6A��!0�!

.����'"���������@-���8A��!0�!

�����"�� ���#������� ���"���'��#������

'���������"����!0/>

��#�'" ���60/

��"�5��#�����"�"#�#���/06

��"�5��#������ #��#��/06

�����#"��

��#�"���'��#�������'������!0��

�� ���"���'��#�������'������!0�

�����#� ��������1�#��>0�

���"�� ���#�������'"���#"�����0

���"�� ���#���������0�>

U

.���#���"�����#���������80

.���#���"�����#�*�����#��������80

.���#���"������"�����#��60

.���#���"������B�����#�*��

9"�� ������>0>

.���#���"������1�#�������"��#"��

9"�� ������>0�

.���#���"���3��"����#���������808

.���#���"����*+��#����'"���#"��

9������� 0

.���#���"�������� ��%� ���/0

.���#���"���2�#���������0

.���#���"���%�;�"�����#�������

������808

.���#���"���#������'"���#"����#��

7 �������0

.���#���"���#���9�����'�2���"���

!0

.���#���"������"�� ���#����������0�>

.���#���"���E������"�����#���0

.1)F���������#���������06

.���#"���#���$�,6������������"#��#��

�������"�����#��60/6

.���#"���#������������#�*���'��#��

����'������##"����!0��

.���#"���#������ �������#��#�* ��� 0/=

.� ���"���#�������'�����#����#"���

!0�

.����'"��������������@-���6A��!0�!

.����'"���������@-���8A��!0�!

V

?�"'���*+��#����'"���#"���9���������#

������� 06/

����"�����#"���� 0�!�� 06

���"���#������#�� 0 =

?�"'�"�������#�#�������'������##"��

"��#���+���"�"�'" ���!0�/

?�"'�"�����#�������������9�����"��

'������������#��������60/

?�"�����#������������"����80//

?�"���3"#�#�* ��@-=� �8/A�����"'�"���#��

#�* ����0/�

Page 243: Cnc - Jdedwards Xe

Index

B73.1 (8/97)

?"��"��������"��#���%� ���,��#�������

9���#�* ��@-��=6�A��80�8

W

�"����������-��

�"�����1����������#���������06

��&��"#����#��������'�������"����

���"'�"�������#��������80/!

��&"����"#��������"�����#��60!

��&"����"#����#���������80/8

��&"����"#���"��#5������#�2���"���

!0/�

��&"����"#���*+��#����'"���#"��

9������� 0//

��&"����"#����#���������08

��&"����"#���#�������-����

2���"����!0/

Z

D��5� "��#�����"����!0�

Page 244: Cnc - Jdedwards Xe