Upload
others
View
10
Download
0
Embed Size (px)
Citation preview
CMT - LGS HYDRAULIC GUILLOTINES
VARIABLE RAKE
Blade safety guard with strategically placed cut outs for easy shearing of small pieces
Control panel on pendant arm. Machine adjustments conveniently located together
Full length rear sheet supports with roller balls for easy transfer of cut material
BLADE GUARD REAR SUPPORTS
CONTROL PANEL
Features • Motorised back gauge with Estun E10-S electronic readout • Streamline design • One touch variable rake angle adjustment of blade • Stroke counter with single and continuous cutting modes • Heavy duty ball transfers on cutting table for ease of material handling • Rear gates with laser safety intrusion cut out beams • Open side throat for long length slitting • Facility to accommodate long length cutting with back gauge kick up bearing • Rapid blade clearance adjustment via conveniently located handle • Individual hydraulic hold down clamps • 1 metre squaring arms with rules and stops • Adjustable cutting stroke for fast cutting of small pieces • Variable rake blade angle adjustment for cleaner cuts • Front blade guard with cut outs for quick shearing of small pieces • Shadow line cutting system eliminating sheet marking • Heavy duty ball transfers on back sheet support • 4 edge cutting blade • Complete Rexroth hydraulic system • Unique deformation compensating table • 3 point roller guide for blade accuracy • PLC controlled operation • Full hydraulic operation (no accumulator return)
Back safety intrusion laser cut out system
Complete Rexroth hydraulic system
Adopts three-point roller guides. Through the force to the front roller by the special spring, the cutting beam keeps in touch tightly with the two back rollers.
The special worktable structure, designed from optimization technology makes the deformation (Sx), which is formed during shearing, to be able to compensate the curving of the upper beam under the shearing force. This assures the blade gap to remain constant along the full length of the worktable thus enhancing the shearing precision and quality.
3 POINT ROLLER GUIDES UNIQUE COMPENSATING TABLE
HYDRAULICS
INTRUSION LASER
COMPLETE MACHINE TOOLS 8/201 Evans Road, Salisbury QLD 4107 Tel: (07) 3272 7734 Fax: (07) 3272 7735 E-mail: [email protected]
www.completemachinetools.com.au
MODEL—LGS 2504 2506 3006 4006 4008 4013 4016
THICKNESS(MM) 4 6 6 6 8 13 16
WIDTH(MM) 2500 2500 3050 4050 4050 4050 4050
HYD SYSTEM PRESSURE (MPA)
25 25 25 25 25 25 25
BACK GAUGE RANGE (MM)
1050 1050 1050 1050 1050 1050 1050
SHEAR ANGLE (DEGREES) 0.5—1.5 0.5—1.5 0.5—1.5 0.5—1.5 0.5—2 0.5—2.5 0.5—2.5
DEPTH OF THROAT (MM) 100 100 100 100 100 100 100
STROKES—NO LOAD (PER MINUTES)
24-33 20-30 18-27 15-24 11-22 8-18 8-18
MOTOR (KW) 7.5 11 11 11 15 30 30
WEIGHT(KG) 4200 5300 6000 8600 11000 16000 19000
DIMENSIONS(MM) (LxWxH)
3110x2000x 1730
3110x2050x 1760
3670x2050x 1760
4670x2070x 1900
4680x2120x 2050
4810x2230x 2340
4830x2300x 2440
SIZES UP TO 9000MM IN LENGTH AND 30MM THICKNESS NOT ALL SIZES HAVE BEEN LISTED SO PLEASE ASK US
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTIFICATION
CNC CONTROLS
OPTIONAL
Delem DAC 310 & 360 programmable CNC controls. DAC 310 comes with servo
driven ball screw back gauge. DAC 360 comes with servo driven ball screw back gauge with auto motorised blade gap
adjustment & rake adjustment.
PNEUMATIC SHEET SUPPORTS
Two types of supports are available.
1. Positioning & falling 2. Positioning, dropping & falling.
These supports are ideal for cutting long lengths of thin material that fold before reaching the back gauge and to avoid marking materials that mark easily.