Close the loop

HLU-MANUFACTURE OF COMPOSITES

CNC AND MANUAL TRIMMING AND DRILLING

LASER TRACKER DIMENSIONAL INSPECTION

ULTRASONIC INSPECTION A‐SCAN AND PHASED ARRAY

ULTRASONIC INSPECTION C‐SCAN

TAP COIN

LEAK TEST

WET AND DRY REPAIRS OF COMPOSITES

PAINTING

ASSEMBLY AND FUNCTIONAL TESTING

Available processes

Hand Lay-Up Technology

CLEAN ROOM 450 m2.

AUTOCLAvE 3 x 10 m.

CNC Trimming and Drilling

Model Code Travel (X / Y / Z) m RPM Max

ENTECH GANTRY 5 AXIS REC 001 14 x 4,4 x 1,8 18000 rpm

CMI FGD310‐7000 3 AXIS REC 003 7,0 x 2,5 x 1,5 14000 rpm

CMI FGD510‐14000 5 AXIS REC 005 14,0 x 4,5 x 1,7 20000 rpm

CMI FGD510‐8000 5 AXIS REC 007 8,0 x 3,0 x 1,5 20000 rpm

BERMAQ CR 5 AXIS REC 002 7,0 x 4,3 x 1,5 20000 rpm

CMI FGD510‐8000 5 AXIS REC 004 8,0 x 3,0 x 1,5 20000 rpm

CMI FGD510‐8000 5 AXIS REC 008 9,0 x 3,0 x 1,9 20000 rpm

SAHOS FC3000 5 AXIS REC 006 3,0 x 1,6 x 0,8 24000 rpm

CNC Trimming and Drilling

Manual Trimming and Drilling

Manual trimming area of 180 m2.

Laser Tracker Dimensional Inspection

Model Code Serial number

LÁSER TRACKER AT401 LEICA LT‐03 390596

LÁSER TRACKER AT402 LEICA LT‐05 392457

LÁSER TRACKER AT401 LEICA LT‐04 3912502 to 52 to 102 to 202 to 302 to 352 to 40

0.0140.0140.0140.0140.0140.014

0.0070.0070.0070.0070.0070.007

In-line distance measurement

Range (m) ADM (mm)MPE values

ADM (mm)Typical values

251020303540

0.0360.0630.1060.1910.2760.3180.361

0.0180.0320.0530.0960.1380.1590.180

Horizontal scale bar measurement

Range (m) ADM (mm)MPE values

ADM (mm)Typical values

15 µm + 6 µm/m 7.5 µm + 3 µm/m

Uncertainty errorMPE values Typical values

INSTRUMENTS

4 Ud. Krautkramer USM 35X

1 Ud. OLYMPUS Omniscan SX ‐ with technology TCG ‐ Probe OLYMPUS 5L24NW2 24 elements Phased Array ‐ probe 1 element

1 Ud OLYMPUS Omniscan mx2 ‐ with technology TCG - Probe OLYMPUS 5L64NW1 64 elements Phased Array ‐ Probe1 element

Ultrasonic inspection A‐SCAN andPhased Array, Tap Coin and Leak Test

Automatic Ultrasonic C‐SCAN

OMNISCAN IX-4CH U8100007 10 x 1.5 x 2.1 m.

Painting

Painting area of 560 m2

with a drying cabinet of 14 x 7 m.

Assembly and fitting operationsfor sub-assemblies and aerostructures

Assembly area of 1.500 m2.

Close the loop