Clipsal Datacomms Cablesupdates.clipsal.com/ClipsalOnline/Files/Brochures/W0000500.pdf · PAIR 1 White - Blue PAIR 2 White - Orange PAIR 3 White - Green PAIR 4 White - Brown PAIR

Clipsal Datacomms Cables

Telephone CablesCategory 5e Cables

Category 6 CablesFibre Optic Cables

104 Clipsal Solutions

CLIPSAL DATACOMMS CABLES

TELEPHONE CABLES

Jumper WireELECTRICAL CHARACTERISTICS

Conductor Resistance (max)

94.5 Ohm/km at 20ºC

Insulated Resistance (min.)1000 mΩ/km

CONSTRUCTION

2 wires 0.5mm plain copper conductor, red and white, black and white, or green and white PVC insulated, twisted jumper wire.

4 wires 0.5mm plain copper conductor, white and red, and blue and black, PVC insulated, twisted jumper wire.

CAT. NO. No. of Pairs Conductor Size Reel Length Approx. Overall (mm) (mm) AWG (mm) Diameter (mm)2T2CIRW5 1 0.5 24 250 1.842T2CIGW5 1 0.5 24 250 1.842T4CIRWBB5 4 0.5 24 250

InternalPlain annealed copper conductors, solid polyethylene insulated, twisted pair, laid up and PVC overall sheathed. Cable is designed for use within telephone exchanges, commercial switchboards and interconnecting wiring systems. These cables have been upgraded to Category 3, 100Ω balanced, suitable for Local Area Network (LAN) network cabling (Up to 16 MHz). Data-grade UTP, capable of supporting transmission rates of up to 16Mbps. Cable is suitable for 100 Base T4, IEEE 802.3 and 4 Mbps Token Ring systems.

PART NUMBERS

2T2PIPV3B Internal Telephone 1/0.50 2 pair - 305 box2T2PIPV5B Internal Telephone 1/0.50 2 pair - 500 box2T3PIPV3B Internal Telephone 1/0.50 3 pair - 305 box2T3PIPV5B Internal Telephone 1/0.50 3 pair - 500 box

CONSTRUCTION

CONDUCTOR: Plain annealed copper - 0.5mm diameterINSULATION: Solid polyethelene

PAIR IDENTIFICATION

PAIR 1 White - BluePAIR 2 White - OrangePAIR 3 White - Green

SHEATH: PVC 75º CSHEATH COLOUR: Cream

Plain Annealed Copper Pairs

PE Insulation

PVC Sheath3 pair cable shown

ELECTRICAL CHARACTERISTICS

DC RESISTANCE Ω/100m: 9.5 Max.RESISTANCE UNBALANCE%: 3.0 Max.CHARACTERISTIC IMPEDANCE: 100±15 @ 1-20 MHzMUTUAL CAPACITANCE NF/100: 5.6 Max.CAPACITANCE UNBALANCE [pF/100] PAIR TO EARTH 0.8 OR 1 kHz: 340 Max.Note: All electrical characteristics are given at 20°C

ATTENUATION AND NEAR END CROSSTALK NEXT:Frequency Max. Attenuation Min. Pr-Pr Next [NHZ] [dB/100m] [dB/100m]

0.064 0.9 N/A 0.256 1.3 N/A 0.512 1.8 N/A 0.772 2.2 43 1 2.6 41 4 5.6 32 10 9.8 26 16 13.1 23

Clipsal Solutions 105


TELEPHONE CABLES

InternalCABLE DESCRIPTION

Plain annealed copper conductors, solid polyethylene insulated, twisted pair, unit construction, taped and PVC overall sheathed. Cable is designed for use within telephone exchanges, commercial switchboards and interconnecting wiring systems. These cables have been upgraded to Category 3, 100Ω balanced, suitable for Local Area Network (LAN) network cabling (Up to 16 MHz). Data-grade UTP, capable of supporting transmission rates of up to 16Mbps. Cable is suitable for 100 Base T4, IEEE 802.3 and 4 Mbps Token Ring systems.

SPECIFICATIONS

AS/ACIF S008 and ISO/IEC 11801, AS/NZS 3080

PART NUMBERS

2T6PIPV Internal Telephone 1/0.50 6 pair2T10PIPV Internal Telephone 1/0.50 10 pair2T20PIPV Internal Telephone 1/0.50 20 pair2T25PIPV Internal Telephone 1/0.50 25 pair2T50PIPV Internal Telephone 1/0.50 50 pair2T100PIPV Internal Telephone 1/0.50 100 pair

CONSTRUCTION

CONDUCTOR: Plain annealed copper - 0.5mm diameterINSULATION: Solid polyethelene

PAIR IDENTIFICATION

PAIR 1 White - BluePAIR 2 White - OrangePAIR 3 White - GreenPAIR 4 White - BrownPAIR 5 White - GreyNote: For cables multiple of 10 pairs, the above colours shall repeat.Units 5 pairs (pairs 1 to 5); 10 pairs (pairs 1 to 10)

UNIT IDENTIFICATION

PAIR 1 to 10 Blue - WhitePAIR 11 to 20 Orange - WhitePAIR 21 to 30 Green - WhitePAIR 31 to 40 Brown - WhitePAIR 41 to 50 Grey - White

SHEATH: PVC 75º CSHEATH COLOUR: Cream

PAIR 6 Red - BluePAIR 7 Red - OrangePAIR 8 Red - GreenPAIR 9 Red - BrownPAIR 10 Red - Grey

PAIR 51 to 60 Blue - BluePAIR 61 to 70 Orange - OrangePAIR 71 to 80 Green - GreenPAIR 81 to 90 Brown - BrownPAIR 91 to 100 Grey - Grey


DC RESISTANCE [Ω/100m]: 9.5 Max.RESISTANCE UNBALANCE%: 3.0 Max.CHARACTERISTIC IMPEDANCE Ω: 100±15 @ 1-20 MHzMUTUAL CAPACITANCE [nF/100]: 5.6 Max.CAPACITANCE UNBALANCE [pF/100] PAIR TO EARTH 0.8 OR 1 kHz: 340 Max.Note: All electrical characteristics are given at 20°C

ATTENUATION AND NEAR END CROSSTALK NEXT:Frequency Max. Attenuation Min. Pr-Pr Next [NHZ] [dB/100m] [dB/100m]

0.064 0.9 N/A 0.256 1.3 N/A 0.512 1.8 N/A 0.772 2.2 43 1 2.6 41 4 5.6 32 10 9.8 26 16 13.1 23

Plain Annealed Copper Pairs (Solid PE Insulated)

10 Pair & 5 Pair Units

PVC Sheath

Polyethelene Terephthelate Tape

25 pair cable shown

MECHANICAL / PHYSICAL PERFORMANCE PAIR COUNT 2 3 6 10 20 25 50 100DIAMETER mm NOMINAL 3.9 4.9 6.8 7.6 9.4 10.6 14.3 19.1MASS kg/km NOMINAL 21 29 52 70 122 148 275 520MINIMUM BENDING RADIUS FULL LOAD mm 40 50 70 80 95 275 145 190MAXIMUM TENSILE STRENGTH SHORT TERM kN 75 110 225 370 750 900 1800 3700OPERATING TEMPERATURE RANGE °C -20 to +60



TELEPHONE CABLES

Jelly Filled External Lead-In Cable

CABLE DESCRIPTION

Cable consists of 2 pairs 0.40mm or 0.64mm diameter plain annealed copper conductors, solid polyethylene insulated, twisted quad, jelly filled interstices, polyethylene sheathed and nylon jacketed.

SPECIFICATIONS

AS/ACIF TS008, AS1125 and AS1049

PART NUMBER

2T2P0JN4 0.40mm Jelly Filled Nylon Jacket 2 Pair2T2P0JN6 0.64mm Jelly Filled Nylon Jacket 2 Pair

CONSTRUCTION

CONDUCTOR: Plain annealed copper - 0.40mm / 0.64mmINSULATION: Solid PolyetheleneCABLING ELEMENT: QuadWATER BLOCKING: Petroleum Jelly (Interstices)SHEATH: Polyethelene (UV Stabilised)JACKET: Nylon (UV Stabilised) - Black

ELECTRICAL CHARACTERISTICS 0.40mm 0.64mm

MAXIMUM CONDUCTOR RESISTANCE [Ω/km]: 139.3 56.4MINIMUM INSULATION RESISTANCE MΩ/km: 20,000 10,000MAXIMUM MUTUAL CAPACITANCE [nF/km]: 49 49MAX. CAPACITANCE UNBALANCE CORRECTED TO 500m LENGTH PAIR TO PAIR pF: 500 500

MECHANICAL / PHYSICAL CHARACTERISTICS 0.40mm 0.64mm

DIAMETER [mm] (Nominal): 5.4 6.5MASS kg/km NOMINAL: 25 40MINIMUM BENDING RADIUS FULL LOAD mm: 54 65MAXIMUM TENSILE STRENGTH SHORT TERM KN: 50 125OPERATING TEMPERATURE °C: -10 to +70 -10 to +70

Plain Annealed Copper Conductor

2T2POJN4 Shown

Solid Polyethylene Insulation

Interstitial Filling Compound

Polyethylene Sheath

Nylon Jacket



TELEPHONE CABLES

Jelly Filled External Lead-In Cable

CABLE DESCRIPTION

Cable consists of 2 pairs 0.40mm diameter plain annealed copper conductors, solid polyethylene insulated, twisted quad, jelly filled interstices and overall polyethylene sheathed.

SPECIFICATIONS


PART NUMBER

2T2P0JPE4 0.40mm Jelly Filled Polyethylene Nylon Jacket 2 Pair

CONSTRUCTION

CONDUCTOR: Plain annealed copper - 0.40mmINSULATION: Solid PolyetheleneCABLING ELEMENT: QuadWATER BLOCKING: Petroleum Jelly (Interstices)SHEATH: Polyethelene (UV Stabilised)


MAXIMUM CONDUCTOR RESISTANCE [Ω/km]: 139.3MINIMUM INSULATION RESISTANCE MΩ/km: 20,000MAXIMUM MUTUAL CAPACITANCE [nF/km]: 49MAX. CAPACITANCE UNBALANCE CORRECTED TO 500m LENGTH PAIR TO PAIR pF: 500

MECHANICAL / PHYSICAL CHARACTERISTICS

DIAMETER [mm] (Nominal): 4.6MASS kg/km NOMINAL: 20MINIMUM BENDING RADIUS FULL LOAD mm: 50MAXIMUM TENSILE STRENGTH SHORT TERM KN: 50OPERATING TEMPERATURE °C: -10 to +70

2T2POJPE4 Shown




Polyethylene Sheath



TELEPHONE CABLES

Jelly Filled External

CABLE DESCRIPTION

Cable consists of up to 100 pairs of 0.64mm diameter plain annealed copper conductors, cellular polyethylene insulated, twinned, bunched into 10 pairs units, units laid up, jelly filled interstices, taped, moisture barriered, polyethylene overall sheathed and nylon jacketed.

SPECIFICATIONS

AS/ACIF S008; AS1125 and AS1049

PART NUMBER

2T10POJPEBN6 0.64mm Jelly filled Moisture Barrier (Screened) Nylon Jacket 10 Pair2T30POJPEBN6 0.64mm Jelly filled Moisture Barrier (Screened) Nylon Jacket 30 Pair2T50POJPEBN6 0.64mm Jelly filled Moisture Barrier (Screened) Nylon Jacket 50 Pair2T100POJPEBN6 0.64mm Jelly filled Moisture Barrier (Screened) Nylon Jacket 100 Pair

CONSTRUCTION

CONDUCTOR: Plain annealed copper 0.64mmINSULATION: Cellular PolyetheleneCABLING ELEMENT: Twisted PairWATER BLOCKING: Petroleum Jelly (Intertices)WRAPPING: Polyethylene Terephthalate or Paper TapeMOISTURE BARRIER: Aluminium/Polyethylene Laminated TapeSHEATH: Polyethylene (UV Stabilised)HARD JACKET: Nylon (UV Stabilised)


MAXIMUM CONDUCTOR RESISTANCE (Ω/km): 56.4MINIMUM INSULATION RESISTANCE (mΩkm): 20,000MAXIMUM MUTUAL CAPACITANCE (nF/km): 49MAX. CAPACITANCE UNBALANCE CORRECTED TO 500m LENGTH PAIR TO PAIR pF: 150

Plain Annealed Copper PairsPolyethylene InsulationJelly Filled IntersticiesWrapping TapesColoured BindersAluminium/PolyethyleneMoisture BarrierPolyethylene SheathNylon Sheath

U4 U5

U6

U7U8

U9

U10 U1 U2

U3

100 Pair Cable Shown

MECHANICAL / PHYSICAL PERFORMANCE PAIR COUNT 10 30 50 100DIAMETER mm NOMINAL 11.6 17.3 21.6 27.0MASS kg/km NOMINAL 155 365 580 999MINIMUM BENDING RADIUS FULL LOAD mm 230 340 430 540MAXIMUM TENSILE STRENGTH SHORT TERM kN 600 1800 3100 6200OPERATING TEMPERATURE RANGE °C -10 to +70



TELEPHONE CABLES

CABLE DESCRIPTION

Cable consists of up to 100 pairs 0.40mm diameter plain annealed copper conductors, solid polyethylene insulated, twisted quad, jelly filled interstices, polyethylene sheathed and poly jacketed.

SPECIFICATIONS


PART NUMBER

2T10P0JPP4 0.40mm Jelly Filled Poly Jacket 10 Pair2T30P0JPP4 0.40mm Jelly Filled Poly Jacket 30 Pair2T50P0JPP4 0.40mm Jelly Filled Poly Jacket 50 Pair2T100P0JPP4 0.40mm Jelly Filled Poly Jacket 100 Pair

CONSTRUCTION

CONDUCTOR: Plain annealed copper - 0.40mmINSULATION: Solid PolyetheleneCABLING ELEMENT: QuadWATER BLOCKING: Petroleum Jelly (Interstices)SHEATH: Polyethelene (UV Stabilised)JACKET: Poly (UV Stabilised) - Black




DIAMETER [mm] (Nominal): 5.4MASS kg/km NOMINAL: 25MINIMUM BENDING RADIUS FULL LOAD mm: 54MAXIMUM TENSILE STRENGTH SHORT TERM N: 50OPERATING TEMPERATURE °C: -10 to 70



2T10POJPP4 Shown



Polyethylene Sheath

Poly Jacket



TELEPHONE CABLES


CABLE DESCRIPTION

Cable consists of up to 100 pairs 0.64mm diameter plain annealed copper conductors, cellular polyethylene insulated, twisted quad, jelly filled interstices, polyethylene sheathed and nylon jacketed.

SPECIFICATIONS


PART NUMBER

2T10P0JPN6 0.64mm Jelly Filled Nylon Jacket 10 Pair2T30P0JPN6 0.64mm Jelly Filled Nylon Jacket 30 Pair2T50P0JPN6 0.64mm Jelly Filled Nylon Jacket 50 Pair2T100P0JPN6 0.64mm Jelly Filled Nylon Jacket 100 Pair

CONSTRUCTION

CONDUCTOR: Plain annealed copper - 0.64mmINSULATION: Cellular PolyetheleneCABLING ELEMENT: QuadWATER BLOCKING: Petroleum Jelly (Interstices)SHEATH: Polyethelene (UV Stabilised)JACKET: Nylon (UV Stabilised) - Black




DIAMETER [mm] (Nominal): 6.5MASS kg/km NOMINAL: 40MINIMUM BENDING RADIUS FULL LOAD mm: 65MAXIMUM TENSILE STRENGTH SHORT TERM N: 125OPERATING TEMPERATURE °C: -10 to 70


2T10POJPN6 Shown

Cellular Polyethylene Insulation


Polyethylene Sheath

Nylon Jacket


CLIPSAL TITANIUM® SERIES

Clipsal Titanium® Category 5e CableCABLE DESCRIPTION

Plain annealed copper conductors, solid polyethylene insulated, twisted pair, flame retardant PVC overall sheathed. 100Ω balanced cable suitable for Local Area Network (LAN) for horizontal distribution and backbone network cabling (100 MHz). Suitable for 16 Mbps Token Ring/155 Mbps ATM PMD/100 Base – VG, T4, X, 1000 Base T (Gigabit Ethernet), etc. Cable is UL listed.

SPECIFICATIONS

EIA/TIA 568, ISO/IEC 11801, AS/NZS 3080 and AS/ACIF S008

PART NUMBER

2D4P5IPV3B,BU - 305m Box2D4P5IPV5B,BU - 500m Box

DIMENSIONS AND MASS

OVERALL CABLE DIAMETER NOMINAL: 5.2mmMASS NOMINAL: 30.5kg/km

CONSTRUCTION

CONDUCTOR: Plain annealed copper - 24 AWGINSULATION: PolyetheleneOUTER SHEATH: PVC 75°CSHEATH COLOUR: Blue - Standard


DC RESISTANCE [Ω/100m]: 9.5 Max.RESISTANCE UNBALANCE%: 3.0 Max.CHARACTERISTIC IMPEDANCE Ω: 100±15 @ 1-20 MHzMUTUAL CAPACITANCE [nF/100]: 5.6 Max.CAPACITANCE UNBALANCE [pF/100m] PAIR TO EARTH 0.8 OR 1 kHz: 340 Max.VELOCITY OF PROPAGATION: 70%Note: All electrical characteristics are given at 20°C

MECHANICAL CHARACTERISTICS

MINIMUM BENDING RADIUS mm: 50MAXIMUM PULLING TENSION N: 150OPERATING TEMPERATURE RANGE: -20°C to +60°C

CORE IDENTIFICATION

PAIR 1: White - Blue Stripes/BluePAIR 2: White - Orange Stripes/OrangePAIR 3: White - Green Stripes/GreenPAIR 4: White - Brown Stripes/Brown

FIRE RESISTANT CHARACTERISTICS

Cable meets IEC332, part 1 specification: “Test on a single vertical insulated wire or cable.”

FREQUENCY INSERTION PRPR POWER SUM PR PR POWER SUM PRPR POWER SUM RETURN MHz LOSS MAX. NEXT MIN. NEXT MIN. ACR MIN. ACR MIN. ELFEXT MIN. ELFEXT MIN. LOSS MIN. dB/100m dB/100m dB/100m dB] dB/100m dB/100m dB/100m dB/100m 1 2.1 65.3 62.3 63.3 60.2 63.8 60.8 - 4 4.0 56.3 53.3 52.3 49.3 51.8 48.8 23 10 6.3 50.3 47.3 44 41 43.8 40.8 25 16 8.0 47.2 44.2 39.2 36.2 39.7 36.7 25 20 9.0 45.8 42.8 36.8 33.8 37.8 34.8 25 31.25 114 42.9 39.9 31.5 28.5 33.9 30.9 23.6 62.5 16.5 38.4 35.4 21.8 18.8 27.9 24.9 21.5 100 21.3 35.3 32.3 14 11 23.8 20.8 20.1

Plain Annealed Copper Conductor (24AWG)

PVC Sheath

Solid Polyethelene Insulation

CATEGORY 5e CABLE


CLIPSAL TITANIUM® SERIES

CATEGORY 6 CABLE

Clipsal Titanium® Category 6 CableCABLE DESCRIPTION

Plain annealed copper conductors, polyethylene insulated, twisted pair, flame retardant PVC overall sheathed. 100Ω balanced cable suitable for Local Area Network (LAN) for horizontal distribution network cabling (250 MHz). Suitable for 100 Mbps TPDDI, 622 Mbps ATM/1000 Base T, IEEE 802.3 and IEEE 802.5, Gigabit Ethernet, broadband digital video, etc. Cable is UL listed.

SPECIFICATIONS

ISO/IEC 11801, Class E; AS/NZS 3080; AS/ACIF S008; TIA/EIA 568B; AS 1660.5.6 (Combustion propagation)

PART NUMBER

2D4P6IPV3B,BU - 305m Box

DIMENSIONS AND MASS

OVERALL CABLE DIAMETER NOMINAL: 6.2mmMASS NOMINAL: 40kg/km

CONSTRUCTION

CONDUCTOR: Plain annealed copper - 24 AWGINSULATION: Solid PolyetheleneOUTER SHEATH: PVC 75°CSHEATH COLOUR: Blue - Standard

MECHANICAL CHARACTERISTICS

MINIMUM BENDING RADIUS mm: 50MAXIMUM PULLING TENSION N: 190OPERATING TEMP. RANGE °C: -20 to +60

CORE IDENTIFICATION

PAIR 1: White - Blue Stripes/BluePAIR 2: White - Orange Stripes/OrangePAIR 3: White - Green Stripes/GreenPAIR 4: White - Brown Stripes/Brown

ELECTRICAL CHARACTERISTICSDC RESISTANCE [Ω/100m]: 9.38 Max.RESISTANCE UNBALANCE%: 3.0 Max.CHARACTERISTIC IMPEDANCE Ω: 100 @ 1-250 MHzMUTUAL CAPACITANCE [nF/100]: 5.5 Max.CAPACITANCE UNBALANCE [pF/100m] PAIR TO EARTH 0.8 OR 1 kHz: 330 Max. (Pair to Earth)DELAY SKEW [ns/100m]: 45 @ 1-250 MHzPROPAGATION DELAY [ns/100m]: 536 Max. @ 250 MHzLCL dB: 16Min. @ 250 MHzVOLTAGE CAPABILITY V: 110POWER CAPACITY W: 20 per pairVELOCITY OF PROPAGATION: 69%Note: All electrical characteristics are given at 20°C

FREQUENCY INSERTION PRPR POWER SUM PR PR POWER SUM PRPR POWER SUM RETURN MHz LOSS MAX. NEXT MIN. NEXT MIN. ACR MIN. ACR MIN. ELFEXT MIN. ELFEXT MIN. LOSS MIN. dB/100m dB/100m dB/100m dB] dB/100m dB/100m dB/100m dB/100m 1 2.1 74.3 72.3 72.2 70.2 67.8 64.8 - 4 3.8 65.3 63.3 61.4 59.4 55.8 52.8 23 10 6 59.3 57.3 53.3 51.3 47.8 44.8 25 16 7.6 56.2 54.2 48.6 46.6 43.7 40.7 25 20 8.5 54.8 52.8 46.3 44.3 41.8 38.7 25 31.25 10.7 51.9 49.9 41.1 39.1 37.9 34.9 23.6 62.5 15.5 47.4 45.4 31.9 29.9 31.9 28.9 21.5 100 19.9 44.3 42.3 24.4 22.4 27.8 24.8 20.1 125 22.5 42.8 40.8 20.4 18.4 25.9 22.9 19.4 155.52 25.3 41.4 39.4 16.1 14.1 24 21 18.8 175 27.1 40.7 38.7 13.6 11.6 22.9 19.9 18.4 200 29.1 39.8 37.8 10.6 8.6 21.8 18.8 18 250 33 38.3 36.3 5.3 3.3 19.8 16.8 17.3

Plain Annealed Copper Conductor (24AWG)

Solid Polyethelene Insulation

Polyethelene Filler

PVC Sheath



FIBRE OPTIC CABLES

Internal/External Light Duty Riser Cable

CABLE DESCRIPTION

The cable consists of a number of 900m tight buffered optical fibres reinforced with aramid yarns and sheathed with NHFR (flame retardant, low smoke generation, low toxic gas emission and zero halogen) compound. For Local Area Networks (LAN) applications including Fibre Distribution Data Interface (FDDI). Cable is suitable for indoor/outdoor use.

SPECIFICATIONS

AS/ACIF TS008, IEC 60793 Parts 1 and 2 and ITU-T recommendations.

PART NUMBER

2F6SMIOLR Light Duty Riser OS1 6 Fibre Singlemode2F12SMIOLR Light Duty Riser OS1 6 Fibre Singlemode

2F4MMIOLR Light Duty Riser OM1 4 Fibre Multimode2F4MMIOLR, RD Light Duty Riser OM1 4 Fibre Multimode2F6MMIOLR Light Duty Riser OM1 6 Fibre Multimode2F8MMIOLR Light Duty Riser OM1 8 Fibre Multimode2F12MMIOLR Light Duty Riser OM1 12 Fibre Multimode2F24MMIOLR Light Duty Riser OM1 24 Fibre Multimode

2F6MMIO50LR Light Duty Riser OM2 6 Fibre Multimode2F12MMIO50LR Light Duty Riser OM2 12 Fibre Multimode

2F4CMIOR50 Light Duty Riser OM3 4 Fibre Multimode2F6CMIOR50 Light Duty Riser OM3 6 Fibre Multimode2F8CMIOR50 Light Duty Riser OM3 8 Fibre Multimode2F12CMIOR50 Light Duty Riser OM3 8 Fibre Multimode2F24CMIOR50 Light Duty Riser OM3 24 Fibre Multimode

CONSTRUCTION

NUMBER OF FIBRES: 2 to 24FIBRE IDENTIFICATION: Colour CodedREINFORCING: Aramid YarnsSHEATH: NHFR (Black) UV stabilised

MECHANICAL / PHYSICAL PERFORMANCE FIBRE COUNT 4 6 8 12DIAMETER mm NOMINAL 4.8 5.6 6.0 6.7MASS kg/km NOMINAL 27 38 42 50MINIMUM BENDING RADIUS FULL LOAD mm 85 105 110 125MAXIMUM TENSILE STRENGTH SHORT TERM kN 6.0MAXIMUM CRUSH RESISTANCE SHORT TERM kN/100mm 1.0OPERATING TEMPERATURE RANGE °C -10 to +60

OPTICAL FIBRE AND TUBE COLOURS

FIBRE 1: BlueFIBRE 2: OrangeFIBRE 3: GreenFIBRE 4: BrownFIBRE 5: GreyFIBRE 6: WhiteFIBRE 7: RedFIBRE 8: BlackFIBRE 9: YellowFIBRE 10: VioletFIBRE 11: PinkFIBRE 12: Aqua

Tight Buffered Optical Fibres (2-12)

Aramid Yarns Reinforcement

NHFR Sheath



FIBRE OPTIC CABLES

Internal Heavy-Duty Riser Cables

CABLE DESCRIPTION

Zipcord consists of two tight buffered optical fibres individually reinforced with aramid yarns and covered with a continuous uniform PVC sheath in figure 8 formation. The sheath is designed to provide easy separation into single fibre cords. The range is compatible with most optical fibre connectors used within Local Area Network applications including Ethernet, Token Ring and FDDI.

SPECIFICATIONS

AS/ACIF S008, IEC 60793 Parts 1 and 2 and ITU-T recommendations.

DIMENSIONS AND MASS

OVERALL CABLE DIAMETER NOMINAL: 2.8 x 5.9mm

MASS NOMINAL: 16kg/km

PART NUMBER

2F2MMIZC 62.5/125/900µm multimode tight buffered optical fibre cable OM12F2SMIZC 9/125/900µm singlemode tight buffered optical cable OS1

CONSTRUCTION

SECONDARY PROTECTION OF THE FIBRES: NylonSECONDARY COATING DIAMETER: 0.90mmREINFORCING: Aramid YarnsSHEATH FIGURE 8: PVCSHEATH COLOURS*: Yellow - SMF Orange - MMF(*) Other colours available on request.

MECHANICAL & ENVIRONMENTAL PERFORMANCE

MINIMUM BENDING RADIUS NO LOAD: 30mm FULL LOAD: 60mmMAXIMUM TENSILE STRENGTH SHORT TERM: 200NMAXIMUM CRUSH RESISTANCE SHORT TERM: 500N/10cmOPERATING TEMPERATURE RANGE: -10°C to +60°C

Optical Fibre

Nylon Tight Buffered

Aramid YarnsReinforcement

PVC Sheath



FIBRE OPTIC CABLES

External Heavy-Duty Riser Cables

CABLE DESCRIPTIONThe cable consists of either four or six simplex cords, each consisting of a tight buffered optical fibre, reinforced with high modulus aramid yarns and sheathed with PVC. Cords are stranded with two solid PVC fillers (four fibre cable only) around a PVC coated aramid yarn central member and the cable is overall sheathed with flame retardant PVC. Cable is suitable for applications in local area network (LAN) including FDDI cabling, Ethernet and Token Ring.

SPECIFICATIONS

AS/ACIF S008, IEC 60793 / 60794 and ITU-T recommendations.

DIMENSIONS AND MASS

OVERALL CABLE DIAMETER NOMINAL: 10.5mm

MASS NOMINAL: 116/125 kg/km

PART NUMBER

2F4CMIOHB Heavy duty riser - multimode OM1


2F2SMIOHB Heavy duty riser - multimode OS1

CONSTRUCTION

SHEATH COLOUR: Black


MINIMUM BENDING RADIUS NO LOAD: 90mm FULL LOAD: 180mmMAXIMUM TENSILE STRENGTH SHORT TERM: 800NMAXIMUM CRUSH RESISTANCE SHORT TERM: 1000N/10cmOPERATING TEMPERATURE RANGE: 0°C to +60°C

6 Simplex Cables

PVC Coated Aramid Yarn Central Member

PVC Sheath

Four and Six Fibres



FIBRE OPTIC CABLES

CABLE DESCRIPTIONThe cable consists of either four or six simplex cords, each consisting of a tight buffered optical fibre, reinforced with high modulus aramid yarns and sheathed with PVC. Cords are stranded around a PVC coated aramid yarn central member, water blocking taped and NHFR (flame retardant, low smoke generation, low toxic gas emission and zero halogen) thermoplastic overall sheathed. Cable is suitable for applications in local area network (LAN) including FDDI cabling, Ethernet and token ring.

SPECIFICATIONS

AS/ACIF S008, IEC 60793 / 60794 and ITU-T recommendations.

PART NUMBER



CONSTRUCTIONNUMBER OF FIBRES: 8 and 12FIBRE INSULATION: Nylon REINFORCING: Aramid yarnsCORD IDENTIFICATION: Numbered CordsCENTRAL MEMBER: PVC Coated AramidWATER BLOCKING: Water swellable (interstices)CORE WRAPPING: Water swellable tapeSHEATH: PVC (individual cords) NHFR (UV Stabilised - Black outher sheath)


8 FIBRES 12 FIBRES

DIAMETER MM NOMINAL 13.5 17.0

MASS KG/KM NOMINAL 160 270

MIN. BENDING RADIUS FULL LOAD MM 230 290

MAX. TENSILE STRENGTH SHORT TERM KN 1.2 1.2

MAX. CRUSH RESISTANCE SHORT TERM KN/100MM 1.0 1.0

OPERATING TEMPERATURE RANGE °C 10 to +70

External Heavy-Duty Riser CablesEight and Twelve Fibres

Simplex Cords

PVC Coated Aramid Yarn Central Member

Water Swellable Tape

Water Swellable Yarns

LSOH Sheath



FIBRE OPTIC CABLES

External Loose Tube CableMulti Mode & Single Mode Fibre Optic CableCABLE DESCRIPTION

Cable containing 2 to 12 optical fibres in water blocked loose tubes (Maximum 12 fibres per tube) and solid polyethylene fillers, total of 6 elements laid-up around a glass reinforced plastic (GRP) central strength member, water blocked interstices, taped, polyethylene overall sheathed and integrally bonded nylon jacketed.

SPECIFICATIONS

ACA TS008; IEC 60793 Parts 1 and 2 and ITU-T recommendations.

DIMENSIONS AND MASS

OVERALL CABLE DIAMETER NOMINAL: 8.2mmMASS NOMINAL: 65kg/km

PART NUMBERS

2F4CMOLDN Outdoor Loose Tube Dry Core - Loose Tube Construction OM1 M/M 4 Core Nylon2F6CMOLDN Outdoor Loose Tube Dry Core - Loose Tube Construction OM1 M/M 6 Core Nylon2F8CMOLDN Outdoor Loose Tube Dry Core - Loose Tube Construction OM1 M/M 8 Core Nylon2F12CMOLDN Outdoor Loose Tube Dry Core - Loose Tube Construction OM1 M/M 12 Core Nylon

2F6CSOLDN Outdoor Loose Tube Dry Core - Loose Tube Construction OS1 S/M 6 Core Nylon2F12CSOLDN Outdoor Loose Tube Dry Core - Loose Tube Construction OS1 S/M 12 Core Nylon

2F4CMOLPN50 Outdoor Loose Tube Dry Core - Loose Tube Construction OM3 4 Core Nylon2F6CMOLPN50 Outdoor Loose Tube Dry Core - Loose Tube Construction OM3 6 Core Nylon2F8CMOLPN50 Outdoor Loose Tube Dry Core - Loose Tube Construction OM3 8 Core Nylon2F12CMOLPN50 Outdoor Loose Tube Dry Core - Loose Tube Construction OM3 12 Core Nylon

CONSTRUCTION

NUMBER OF ELEMENTS: 6TUBE/FIBRE IDENTIFICATION: Colour CodedSTRENGTH MEMBER: Glass Reinforced Plastic (GRP)FIBRE PROTECTION TUBES: Polybutylene Terephthalate (PBT)FILLERS: As requiredWATER BLOCKING: Thixotropic gel (tubes) Water swellable yarns (interstices)CORE WRAPPING: Polyethylene terephthalate typeSHEATH: PolyethyleneJACKET: Nylon (UV stabilised)


MINIMUM BENDING RADIUS FULL LOAD: 180 mmMAXIMUM TENSILE STRENGTH SHORT TERM: 1800 NMAXIMUM CRUSH RESISTANCE SHORT TERM: 2000 N/10cmOPERATING TEMPERATURE RANGE: -10°C to +70°C


FIBRE 1: Blue FIBRE 7: RedFIBRE 2: Orange FIBRE 8: BlackFIBRE 3: Green FIBRE 9: YellowFIBRE 4: Brown FIBRE 10: VioletFIBRE 5: Grey FIBRE 11: PinkFIBRE 6: White FIBRE 12: Aqua

PBT Loose Tubes (1-6)

Optical Fibres and Filling Compound

Non-Metallic (GRP) Central Strength Member

Solid PE Fillers (0-5)

Ripcord

Water Swellable Yarns

Polyethylene Sheath

Nylon Jacket(Bonded to PE)



FIBRE OPTIC CABLES

External Standard Loose Tube CablesMulti Mode & Single Mode Fibre Optic CableCABLE DESCRIPTION

Cable containing 24 or 48 optical fibres in water blocked loose tubes (Maximum 12 fibres per tube) and solid polyethylene fillers, total of 6 elements laid-up around a glass reinforced plastic (GRP) central strength member, water blocked interstices, taped, polyethylene overall sheathed and integrally bonded nylon jacketed.

SPECIFICATIONS

ACA TS008; IEC 60793 60794 and ITU-T recommendations.

DIMENSIONS AND MASS

OVERALL CABLE DIAMETER NOMINAL: 10.1mmMASS NOMINAL: 83 - 86 kg/km

PART NUMBERS

2F24CMOLDN Outdoor Loose Tube Dry Core - Standard Construction OM1 M/M 24 Core Nylon2F24CSOLDN Outdoor Loose Tube Dry Core - Standard Construction OS1 S/M 24 Core Nylon2F48CSOLDN Outdoor Loose Tube Dry Core - Standard Construction OS1 S/M 48 Core Nylon

CONSTRUCTION

NUMBER OF ELEMENTS: 6TUBE/FIBRE IDENTIFICATION: Colour CodedSTRENGTH MEMBER: Glass Reinforced Plastic (GRP)FIBRE PROTECTION TUBES: Polybutylene Terephthalate (PBT)FILLERS: As requiredWATER BLOCKING: Thixotropic gel (tubes) Water swellable yarns (interstices)CORE WRAPPING: Polyethylene terephthalate typeSHEATH: PolyethyleneJACKET: Nylon (UV stabilised)


MINIMUM BENDING RADIUS NO LOAD: 90mm FULL LOAD: 180mmMAXIMUM TENSILE STRENGTH SHORT TERM: 1800 NMAXIMUM CRUSH RESISTANCE SHORT TERM: 2000 N/10cmOPERATING TEMPERATURE RANGE: -10°C to +70°C

PBT Loose Tubes (1-6)

Optical Fibres and Filling Compound

Non-Metallic (GRP) Central Strength MemberSolid PE Fillers (0-4)


Synthetic Tape

Polyethylene Sheath

Nylon Sheath


FIBRE 1/TUBE 1: BlueFIBRE 2/TUBE 2: OrangeFIBRE 3/TUBE 3: GreenFIBRE 4/TUBE 4: BrownFIBRE 5/TUBE 5: GreyFIBRE 6/TUBE 6: WhiteFIBRE 7/TUBE 7: RedFIBRE 8/TUBE 8: BlackFIBRE 9/TUBE 9: YellowFIBRE 10/TUBE 10: VioletFIBRE 11/TUBE 11: PinkFIBRE 12/TUBE 12: Aqua



FIBRE OPTIC CABLES

CABLE DESCRIPTIONSimplex cord consists of a tight buffered optical fibre reinforced with aramid yarns and sheathed with flame retardant PVC. The range is compatible with most optical fibre used within Local Area Network applications including Ethernet, Token Ring and FDDI.

SPECIFICATIONS

ACA TS008; IEC 60793 Parts 1 and 2 and ITU-T recommendations.

DIMENSIONS AND MASS

OVERALL CABLE DIAMETER NOMINAL: 2.8mmMASS NOMINAL: 7.5kg/km

PART NUMBERS

2F2MMIP Multimode Patch Cord OM1

CONSTRUCTION

SECONDARY PROTECTION OF THE FIBRES: NylonSECONDARY COATING DIAMETER: 0.90mmREINFORCING: PVCSHEATH FIGURE 8: PVCSHEATH COLOURS*: Yellow SMF Orange MMF(*) Other colours available on request


MINIMUM BENDING RADIUS NO LOAD: 30mm FULL LOAD: 60mmMAXIMUM TENSILE STRENGTH SHORT TERM: 100 NMAXIMUM CRUSH RESISTANCE SHORT TERM: 500 N/10cmOPERATING TEMPERATURE RANGE: -10°C to +60°C

Internal Single Fibre Patch Cable

Optical Fibre

Nylon Tight Buffered

Aramid Yarns Reinforcement

PVC Sheath

Documents

Clipsal Datacomms Cablesupdates.clipsal.com/ClipsalOnline/Files/Brochures/W0000500.pdf · PAIR 1 White - Blue PAIR 2 White - Orange PAIR 3 White - Green PAIR 4 White - Brown PAIR