25
80 | Twisted Pair www.efb-elektronik.de Twisted Pair | 81 TWISTED PAIR Cat.6a 500 MHz Structured Cabling System ............................................................. 82, 83 DIN-Rail Adapter ....................................................................................................................84 Keystone Adapter ..................................................................................................................85 Trunk Cable Cat.7 ........................................................................................................... 86 - 89 Cat.6a 500 MHz Components ...................................................................................... 90, 91 Cat.6 Class E 250 MHz Components ..................................................................................92 LED Patch Cable Cat.6a 500 MHz................................................................................. 93, 94 Cat.6/6a Patch Cable ..................................................................................................... 95 - 97 VoIP Patch Cable ....................................................................................................................97 Cat.5e Patch Cable .......................................................................................................... 98, 99 Cat.6a Premium Patch Cable ...............................................................................................99 Crossover Patch Cable ....................................................................................................... 100 UTP Patch Cable PVC / LSZH ............................................................................................. 101 Cat.7/7+ Installation Cable .................................................................................... 102 - 105 Cat.6a Installation Cable .......................................................................................... 106, 107 Cat.7 Patch / - Installation Cable for Special Applications ............................... 108 - 110 Cat.5e / 6 / 6a Extension .................................................................................................... 111 Cat.6 / Cat.5e Patch Panel + Outlets STP / UTP ................................................... 112 - 114 19“ Cat.5e / 6 / 6 Class E Patch Panels ................................................................... 114, 115 RJ45 Panel, Modules, Adapter ............................................................................... 116 - 118 Patch Cable Metresware........................................................................................... 119, 120 RJ45 Plugs................................................................................................................... 121 - 123 Tools ............................................................................................................................. 124 - 127 Port Scout PS96 ................................................................................................................... 128 LAN Tester ............................................................................................................................. 129

TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

Embed Size (px)

Citation preview

Page 1: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

80 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 81

TWISTED PAIR

Cat.6a 500 MHz Structured Cabling System .............................................................82, 83

DIN-Rail Adapter ....................................................................................................................84

Keystone Adapter ..................................................................................................................85

Trunk Cable Cat.7 ...........................................................................................................86 - 89

Cat.6a 500 MHz Components ......................................................................................90, 91

Cat.6 Class E 250 MHz Components ..................................................................................92

LED Patch Cable Cat.6a 500 MHz .................................................................................93, 94

Cat.6/6a Patch Cable .....................................................................................................95 - 97

VoIP Patch Cable ....................................................................................................................97

Cat.5e Patch Cable ..........................................................................................................98, 99

Cat.6a Premium Patch Cable ...............................................................................................99

Crossover Patch Cable ....................................................................................................... 100

UTP Patch Cable PVC / LSZH ............................................................................................. 101

Cat.7/7+ Installation Cable .................................................................................... 102 - 105

Cat.6a Installation Cable .......................................................................................... 106, 107

Cat.7 Patch / - Installation Cable for Special Applications ............................... 108 - 110

Cat.5e / 6 / 6a Extension .................................................................................................... 111

Cat.6 / Cat.5e Patch Panel + Outlets STP / UTP ................................................... 112 - 114

19“ Cat.5e / 6 / 6 Class E Patch Panels ................................................................... 114, 115

RJ45 Panel, Modules, Adapter ............................................................................... 116 - 118

Patch Cable Metresware ........................................................................................... 119, 120

RJ45 Plugs ................................................................................................................... 121 - 123

Tools ............................................................................................................................. 124 - 127

Port Scout PS96 ................................................................................................................... 128

LAN Tester ............................................................................................................................. 129

Page 2: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

82 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 83

TWISTED PAIR

Frame Set for Cat.6aRJ45 module E-20070

Art.-No. TypeET-25108 1 x Type, RAL9010 (pure white)ET-25109 2 x Type, RAL9010 (pure white)ET-25110 3 x Type, RAL9010 (pure white)

Frame Set For Ackermann Floor Tanks

Art.-No. TypeET-25178 2-level for 6 x E-20070 (Ackermann)ET-25179 3-level for 9 x E-20070 (Ackermann) Frame set for 6 respectively 9 RJ45 modules E-20070 •

for snapping in Ackermann floor tanks 10 Gigabit Ethernet Cat.6a 500 MHz patch cable•S/FTP 4 x 2 x AWG26/7 LSZH IEC332-1•RJ45 (50µ“)•Moulded strain relief•100% Cat.6 tested•100% Cat.6a tested (protocol enclosed)•Serial number on cable and test protocol•

Available lengths in metres:1.0 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0

with test protocol Cat.6aK5534GR.x grey K5534GE.x yellowK5534BL.x blue K5534GN.x greenK5534RT.x red K5534GN.x

Cat.6a S/FTP PIMF Premium Patch Cable

4 Connector Channel Link acc. to ISO/IEC 11801 AMD 1 Class Ea

2 Connector Permanent Link acc. to ISO/IEC 11801 AMD 2 Class Ea

Cat.6a 500 MHz RJ45 Module, 10GBitArt.-No. TypeE-20070 Cat.6a RJ45 Keystone Module Cat.6a RJ45 module STP for AWG22/1...AWG24/1•

Diecast housing•No LSA tool necessary•For installation in modular distribution panels up to 24-port/1U and 1-/2-/3-port •connection socketsTIA/EIA 568A/B coded•Strain relief via cable tie•Suitable for: 37571.1, 37576.1, 37578.1, 37580.1, 37565.1, 37577.1, ET-25085/86•Cat.6a link-certified (GHMT)•We recommend a support tool to press the housing e.g. Knipex tool No. 8603180•PoE Plus acc. to IEEE 802.3at•

Art.-No. Type37571.1 16-port, metallic37576.1 24-port, metallic37580.1 24-port, RAL9005 (black)37578.1 24-port, RAL7035 (light grey) For modules E-20070•

Incl. cable management•Without modules•

Art.-No. Type99980.x 4 x 2 x AWG23/1 PIMF FRNC-B, 100 Ohm99980DX.x 2 x (4 x 2 x AWG23/1) PIMF FRNC-B, 100 Ohm99981.x 4 x 2 x AWG23/1 PIMF FRNC-C, 100 Ohm99981DX.x 2 x (4 x 2 x AWG23/1) PIMF FRNC-C, 100 Ohm ConstructionConnector Copper wire, bare, Ø 0.56 mm (AWG23) Insulation Foam-Skin Polyethylen, Ø 1.35 mm Stranding 2 lines to a pair Pair shielding Aluminium laminated plastic composite foil Stranding 4 pairs to a core (PIMF) Total shield Tinned copper braid (about 35% coverage) Protective sheath orange

Cat.7 Installation Cable S/FTP1000 MHz PIMFDistribution Panel 19” 1U (unassembled)

25 Years System Warranty - Cabling System with 25 Years System Warranty - Cabling System with 25 Years System Warranty - Cabling System with 25 Yea

The covers have to be snapped onto front side after •installation and are included in delivery

Cat.6

a Cab

ling

Syst

emCat.6a Cabling SystemCertified cabling system for 500 MHz

acc. to class Ea (ISO/IEC 11801) resp. Cat. 6a (TIA 568) 10 GBit Ethernet with 25 years system warranty

Page 3: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

84 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 85

TWISTED PAIR

Art.-No. TypeET-25173.1 2-level frame set for 2 x adapter sheetET-25173.2 3-level frame set for 3 x adapter sheet

Frame Set For Cat.6aRJ45 module E-20070

Art.-No. TypeET-25085 Colour RAL1013, pearl-whiteET-25086 Colour RAL1013, pearl-white

Consolidation Point CP-Boxfor double floor and suspended ceiling

Art.-No. TypeET-25172 4 x RJ45 module CP-Box•

For 4 RJ45 modules E-20070•Earthing bolt•Cover hinged•Dimensions (W) x (H) x (T) 115 x 245 x 40 mm•

Frame set Hybrid for 2 respectively 3 mounting plates for snapping in Acker-•mann fkoor tanksFor 2 x E-20070•

Art.-No. TypeET-25173.3 3 x RJ45 modulesET-25173.4 Adapter sheet for 3 x SC duplex adaptersET-25173.5 3 x SC simplex or LC duplex

DIN Rail Adapterfor 1 x Keystone E-20070

Art.-No. TypeET-25184 DIN-Rail adapter for Keystone module

Art.-No. TypeHousing colour white EB528 Keystone Adapter LC duplex MultimodeEB529 Keystone Adapter ST simplex MultimodeEB530 Keystone Adapter SC simplex MultimodeHousing colour black EB531 Keystone Adapter LC duplex MultimodeEB532 Keystone Adapter ST simplex MultimodeEB533 Keystone Adapter SC simplex Multimode

Keystone Adapter FOLC / ST / SC Multimode

Mounting depth incl. dust cap: 21.5 mm (LC dpx.), 12.5 mm (ST), 20.5 mm (SC)•Adapters with metal sleeve•Housing material: plastic white or black•

Keystone Adapter HDMItype A jack - type A jack

Art.-No. TypeEB479 Keystone Adapter HDMI whiteEB520 Keystone Adapter HDMI black

Mounting depth: 23 mm•2 x HDMI type A jack•Housing material: plastic white or black•

Keystone Adapter USBtype A jack - type A jack

Art.-No. TypeEB498 Keystone Adapter USB whiteEB527 Keystone Adapter USB black

Mounting depth: 25 mm•2 x USB type A jack•Housing material: plastic white or black•

Art.-No. TypeHousing colour white EB493 Jack / Jack, colour code redEB494 Jack / Jack, colour code red whiteEB495 Jack / Jack, colour code yellowHousing colour black EB522 Jack / Jack, colour code redEB523 Jack / Jack, colour code red whiteEB524 Jack / Jack, colour code yellow

Keystone Adapter Cinch (RCA)Buchse - Buchse

Mounting depth: 22.5 mm•2 x Cinch jack, colour coded•Housing material: plastic white or black•

Keystone Adapter Stereo 3.5 mm3.5 mm jack - 3.5 mm jack

Art.-No. TypeEB497 Keystone Adapter Stereo, whiteEB526 Keystone Adapter Stereo, black Mounting depth 27 mm•

2 x 3.5 mm stereo jack•Housing material: plastic white or black•

RJ45 Module Holder 1 xfor DIN-Rail, side-by-side mountable

Art.-No. TypeET-25185 Module Holder for DIN-RailET-25185.1 Cover Plates left/right

Module holder for mounting on DIN-Rail TH35 •acc. to DIN EN607151 DU (> 18 mm) width (DIN 43880)•For Keystone RJ45 (e.g. E-20070, E-20072)•Side-by-side mountable, with earthing spring•Colour: RAL7035, light grey•

Keystone Adapter USBtype A jack - type B jack

Art.-No. TypeEB534 Keystone Adapter USB black

Mounting depth 25 mm•Both-sided snap in•Housing material plastic white or black•

Acce

ssor

ies M

ultimedia Keystone Adapter

Page 4: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

86 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 87

TWISTED PAIR

Standards:IEC 61156-6ISO/IEC 11801 2nd ed.EN 50173-5EN 50288-4-2

ConstructionConductor Bare copper wire, Ø 0.4 mm (AWG26)Insulation Foam skin Polypropylen, Ø 1.0 mm (+/- 0.05)Twisting 2 cores to the pairPair screen Aluminium laminated plastic foilCable lay up 4 x PIMF to the coreCable screen Tinned copper braid, coverage approx. 60 %Sheath LSHF, orange RAL2003, number printing 1 .. 6Stranding (6 x) 0+6 stranded to the cable core, filler in the centreOverall sheath LSHF, orange RAL2003

Mechanical Specifications

Min. bending radiuswithout load 8 x diameterwith load 4 x diameter

Temperature rangeduring operation -20°C up to +60°C*

during installation +10°C up to +40°C* use of PoE reduces the temperature range

Electrical Specifications at 20°CLoop resistance ≤ 280 Ω/kmResistance unbalance ≤ 2 %

Test voltagecore / core 1000 V DC 1 mincore / screen 1000 V DC 1 min

Capacitance 800 Hz nom. 44 nF/kmCapacitance unbalance ≤ 1600 pF/kmImpedance 100 MHz 100 Ω ± 15 ΩNVP ca. 76 %Insulation resistance 500 V ≥ 2000 MΩ/kmCoupling attenuation ≥ 85 dB

Technical DataDesignation Type Outer Diameter Fire Load Weight Copper Content Tensile Force

J-09YS(St)CHH 6x4x2x0.4 PiMFmm MJ / km kWh / m kg / km kg / km N19.2 3460 0.96 322 132 700

Flame ResistancePVC IEC 60332-1LSHF IEC 60332-1; IEC 60754-2; IEC 61034

Trunk Cable Compact Cat.7 S/FTP 6-fold AWG26

Pre-assembled with Cat.6a 500 MHz RJ45 module 10Gbit (E-20070)•Due to the conductor diameter of 0.4 mm (AWG26) and the resulting cable outer diameter of 19.2 mm especially suitable for use in data center (packing density, •climatisation...)Factory-provided measuring protocol included•Performance Cat.7/Cat.6a is guaranteed up to 60 m based on the conductor diameter•Whip length and total length according to customer specification•

Applications:IEEE 802.3: 10Base-T; 100Base-T; 10GBase-T; ISDN; xDSL•IEEE 802.5: 16 MB; ISDN; TPDDI; ATM 155Mbit/s•

Art.-No. TypeDCK26206.1 6 x, both sides pre-assembled with Cat.6a RJ45 module

Trun

k Ca

ble Trunk Cable

Page 5: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

88 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 89

TWISTED PAIRTrunk Cable Compact Cat.7 S/FTP 6-fold/8-fold AWG23

Pre-assembled with Cat.6a 500 MHz RJ45 module 10Gbit (E-20070)•Due to the conductor diameter of 0.56 mm (AWG23) and the resulting cable outer diameter of 25.0 resp. 27.1 mm especially suitable for use in data center (packing •density, climatisation...)Factory-provided measuring protocol included•Performance Cat.7/Cat.6a is guaranteed up to 80 m based on the conductor diameter•Whip length and total length according to customer specification•

Applications:IEEE 802.3: 10Base-T; 100Base-T; 10GBase-T; ISDN; xDSL•IEEE 802.5: 16 MB; ISDN; TPDDI; ATM 155Mbit/s•

StandardsIEC 61156-6ISO/IEC 11801 2nd ed.EN 50173-5EN 50288-4-1

ConstructionConductor Bare copper wire, Ø 0.56 mm (AWG23)Insulation Foam skin Polypropylen, Ø 1.35 mmTwisting 2 cores to the pairPair screen Aluminium laminated plastic foilCable lay up 4 x PIMF to the coreCable screen Tinned copper braid, coverage approx. 35 %Sheath LSHF, orange RAL2003, number code for identification Stranding (6 x) 0+6/8 stranded to the cable core, filler in the centreOverall sheath LSHF, orange RAL2003

Mechanical Specifications

Min. bending radiuswithout load 8 x outer diameterwith load 4 x outer diameter

Temperature rangeduring operation -20°C up to +60°C*

during installation 0°C up to +50°C* use of PoE reduces the temperature range

Flame ResistanceLSHF (FRNC) IEC 60332-1; IEC 60754-2; IEC 61034

Elektrical Specifications at 20°C ± 5°CLoop resistance ≤ 176 Ω/kmResistance unbalance ≤ 2 %Insulation resistance 500 V ≥ 2000 MΩ * kmMutual capacitance 800 Hz nom. 43 nF/kmCapacitance unbalance ≤ 1500 pF/kmNVP ca. 79 %Impedance 100 MHz 100 Ω ± 5 ΩPropagation delay nominal < 450 ns / 100 mDelay skew nominal < 15 ns / 100 mTest voltage Ader/Ader und Ader/Schirm 1000 V DC 1 minCoupling attenuation ≥ 85 dB

Technical DataDesignation Type Outer Diameter Fire Load Weight Copper Content Tensile Force

J-02YS(St)CHH 6x4x2x0.56 PiMF

mm MJ / km kWh / m kg / km kg / km N

25.0 4819 1.339 446 163 900J-02YS(St)CHH 8x4x2x0.56 PiMF 27.1 6640 1.845 581 217 1200

Art.-No. TypeMMCK23206.1 6 x AWG 23MMCK23208.1 8 x AWG 23

Trun

k Ca

ble Trunk Cable

Page 6: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

90 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 91

TWISTED PAIR

Cat.6a 500 MHz Patch Panel 19” 1U, 10Gbit

Art.-No. Type37666.1AV4 500 MHz, 24-port RJ45, RAL7035, 1U Certified cabling system 500 MHz Class EA (ISO/IEC 11801) resp. Cat.6a (TIA 568 B)

10Gbit Ethernet with 25 years system warranty• Fully shielded patch panel with 24 fully shielded jacks for using in structured •cabling systemsCable connection via LSA terminals AWG22-AWG24•With screw for earth connection•Printed with colour-code acc. TIA 568 B•

Art.-No. Type ColourConnection top/bottom ET-25132AV4 2-port flush-type RAL1013, pearl-whiteET-25133AV4 2-port flush-type RAL9010, pure-whiteConnection right/left ET-25130AV4 2-port flush-type RAL9010, pure-whiteET-25131AV4 2-port flush-type RAL1013, pearl-white

Cat.6a 500 MHz Flush-Type Outlet, 10Gbitdesign capable

40° outlet, LSA IDC terminals, incl. 6.3 mm earth connection•Fully shielded diecast housing•For installation in ducts and underfloor systems, central plate conforms to DIN49075, metal frame•Design-capable, compatible with all common switch programmes• Packing unit: 5 pcs.•

2 x Hirose TM21, Cat.6a, halogenfree•TIA/EIA 568B coded•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0

Cat.6a Hirose TM21 Patch Cable

with S/FTP PIMF DRAKA UC900 1000 MHz cableK8051.x grey K8050.x black K8052.x redK8053.x green K8054.x blue K8055.x yellowK8056.x orange K8058.x white

Drum sizes in metres:100.0 - 500.0 - 1000.0

Art.-No. Type99980.x 4 x 2 x AWG23/1 PIMF FRNC-B, 100 Ohm99980DX.x 2 x (4 x 2 x AWG23/1) PIMF FRNC-B, 100 Ohm99981.x 4 x 2 x AWG23/1 PIMF FRNC-C, 100 Ohm99981DX.x 2 x (4 x 2 x AWG23/1) PIMF FRNC-C, 100 Ohm ConstructionConnector Copper wire, bare, Ø 0.56 mm (AWG23) Insulation Foam-Skin Polyethylen, Ø 1.35 mm Stranding 2 lines to a pair Pair shielding Aluminium laminated plastic composite foil Stranding 4 pairs to a core (PIMF) Total shield Tinned copper braid (about 35% coverage) Protective sheath orange

Cat.7 Installation Cable S/FTP1000 MHz PIMF

Certified cabling system for 500 MHz Class Ea (ISO/IEC 11801) respectively Cat. 6a (TIA 568) 10 GBit Ethernet with 25 years system warranty

4 Connector Channel Link acc. to ISO/IEC 11801 AMD 1 Class Ea

2 Connector Permanent Link acc. to ISO/IEC 11801 AMD 2 Class Ea

25 Years System Warranty - Cabling System with 25 Years System Warranty - Cabling System with 25 Years Sytem Warranty - Cabling System with 25

Cat.6

a Cab

ling

Syst

emCat.6a Cabling System

Page 7: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

92 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 93

TWISTED PAIR

Cat.6 250 MHz RJ45 Module, 1Gbit

Shielded 1GBaseT, Class E Keystone Jack for AWG22/1 - AWG24/1•Diecast housing•No LSA tool necessary•For installation in modular distribution panels up to 24-port/1U and •1-/2-/3-port connection socketsTIA/EIA 568A/B coded•Strain relief via cable tie•Instruction manual in english•Suitable for: 37571.1, 37576.1, 37578.1, 37580.1, 37565.1, 37577.1, ET-25085/86•We recommend a support tool to press the housing e.g. Knipex tool No. 8603180•PoE Plus acc. to IEEE 802.3at•

Cat.6 Class E 250 MHz Patch Panel 19” 1U, 1Gbit

Art.-No. Type37667.1V5 24-Port, RAL7035 (light grey), 1U AccessoriesArt.-No. Accessories37520.2 RJ45 dummy plug black, 100 pcs.81022.100 Cable tie, L 100 mm, W 2.5 mm, 100 pcs.

Cat.6 Class E 250 MHz Flush-Type Outlet, 1Gbit Standard

Art.-No. Connection Type ColourET-25210.3V5 Connection right/left 2-Port, f-m RAL1013, pearl-whiteET-25210.4V5 Connection top/bottom 2-Port, f-m RAL1013, pearl-whiteET-25211.3V5 Connection right/left 2-Port, f-m RAL9010, pure-whiteET-25211.4V5 Connection top/bottom 2-Port, f-m RAL9010, pure-white Class E (250 MHz) according to ISO/IEC 11801 and EN50173•

40° outlet, 8-pole IDC terminals•Fully shielded diecast housing, labelling filed with transparent cover•For installation in ducts and underfloor systems•Central plate 50 x 50 mm, including cover plate 80 x 80 mm•

With illuminated RJ45 plugs for traceability of the cable run•10 GBit Ethernet, Class Ea link performance•Designed for the use in office, industry and data centres•With the aid of a detector in both RJ45 plugs of the patch cables LED`s are reactivated, which aloow a explicit •allocation of the patchingThe patch cable offers a maximum of data security by minimizing of operation failures (mis-patchings, discon-•nections), RFID IC possible

Available lengths in metres:1.0 - 2.0 - 3.0 - 5.0 - 10.0

MMCK1001GN.x green MMCK1001BL.x blue MMCK1001GE.x yellowMMCK1001GR.x grey MMCK1001RT.x red

Multimedia Connect Patch Cable Cat.6a 500 MHz

Art.-No. TypeE-20072 Cat.6 RJ45 Keystone Module

Class E (250 MHz) acc. to ISO/IEC 11801 and EN50173•Printed with colour code TIA 568 A/B•24 x fully shielded RJ45 jacks•8-pole LSA terminals•19“ fully shielded steel plate housing•Strain relief via cable ties•

Cat.6

Cla

ss E

LED Patch Cable Cat.6a

Page 8: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

94 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 95

TWISTED PAIR

LED Detector

Art.-No. TypeMMC10001 Detector To acticate the LEDs in MMC patch cable Cat.6a S/FTP•

A flash-signal or a continious lighting can be generated•

Spare Coin Cell for LED Detector

Art.-No. TypeMMC10002 1 piece

Plug Marking Set

Art.-No. ColourMMC10003 yellowMMC10004 redMMC10005 blueMMC10006 green

1 Set = 100 pieces•For retrospectively snapping onto the RJ45 plugs•For service allocation•

2 x Hirose TM31, Cat.6a, halogenfree•TIA/BA 569B coded•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0

10 Gigabit Ethernet Cat.6a 500 MHz patch cable•S/FTP 4 x 2 x AWG26/7 LSZH IEC332-1•RJ45 (50µ“)•Moulded strain relief•100% Cat.6a tested (protocol enclosed)•Serial number on cable and test protocol•

Available lengths in metres:1.0 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0

2 x Hirose TM31, Cat.6a, halogenfree•TIA/EIA 568B coded•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0

2 x Hirose TM31, Cat.6a, halogenfree•TIA/EIA 568B coded•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0

This cable is according to ISO 11801 is Cat.6a component certified•Available only in colour white•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5

with LED for tracing the cable runMMCK1001WS.x white

LED RJ45 Patch Cable Cat.6a S/FTP

with S/FTP PIMF Kerpen MegaLine F6-90 S/F flexK8570GR.x grey K8570RT.x red K8570GE.x yellowK8570GN.x green K8570BL.x blue

Cat.6a Hirose TM31 Patch Cable

Neccessary for fully replacement of the batteries in the detector: 4 pcs.•

with S/FTP PIMF DRAKA UC900 1000 MHz cableK8560GR.x grey K8560SW.x black K8560GN.x greenK8560BL.x blue K8560OR.x orange K8560WS.x whiteK8560RT.x red K8560GE.x yellow

Cat.6a Hirose TM31 Patch Cable

with test protocol Cat.6aK5534GR.x grey K5534GE.x yellow K5534RT.x redK5534BL.x blue K5534GN.x green

Cat.6a S/FTP PIMF Premium Patch Cable

with S/FTP PIMF Dätwyler 7702 1200 MHz cableK8580GR.x grey K8580SW.x black K8580RT.x redK8580GN.x green K8580BL.x blue K8580GE.x yellow

Cat.6a Hirose TM31 Patch Cable

LED

Patc

h Ca

ble C

at.6

a Patch Cable Cat.6a

Page 9: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

96 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 97

TWISTED PAIR

2 x Hirose TM21, Cat.6a, halogenfree•TIA/EIA 568B coded•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0

with S/FTP PIMF DRAKA UC900 1000 MHz cableK8051.x grey K8050.x black K8052.x redK8053.x green K8054.x blue K8055.x yellowK8056.x orange K8058.x white

Cat.6a Hirose TM21 Patch Cable

2 x Hirose TM21, Cat.6, halogenfree•TIA/EIA 568B coded•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0

with S/FTP PIMF Kerpen MegaLine F6-90 S/F flexK8210GR.x grey K8210RT.x red K8210GE.x yellowK8210GN.x green K8210BL.x blue

Cat.6a Hirose TM21 Patch Cable

2 x Hirose TM21, Cat.6a, halogenfree•Pin assignment according to TIA/EIA 568B•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0

with S/FTP PIMF Dätwyler 7702 1200 MHz cableK8708GR.x grey K8708SW.x black K8708RT.x redK8708GN.x green K8708BL.x blue K8708GE.x yellow

Cat.6a Hirose TM21 Patch Cable

2 x Hirose TM21, Cat.6a, halogenfree•90° Angled plugs•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0

with S/FTP PIMF DRAKA UC900 1000 MHz cable, boot blackK4137BL.x blue K4137GE.x yellow K4137GN.x greenK4137GR.x grey K4137OR.x orange K4137RT.x redK4137SW.x black K4137WS.x white

Cat.6a Hirose TM21 Patch Cable with angled plugs

2 x Stewart SS39200-012, Cat.6a, halogenfree•TIA/EIA 568B coded•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0

with S/FTP PIMF DRAKA UC900 1000 MHz cableK1450GR.x grey K1450SW.x black K1450RT.x redK1450GN.x green K1450BL.x blue K1450GE.x yellowK1450OR.x orange K1450WS.x white

Cat.6a Stewart SS39200-012 Patch Cable

2 x AMP EMT, Cat.6a, halogenfree•TIA/EIA 568B coded•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0

with S/FTP PIMF DRAKA UC900 1000 MHz cableK8181.x grey K8182.x yellow K8183.x redK8184.x blue K8185.x black K8186.x green

Cat.6a AMP EMT Patch Cable

with length imprint on the bootK5510.x grey K5511.x yellow K5512.x redK5513.x blue K5514.x green K5515.x blackK5516.x orange K5518.x white K5519.x magenta

Cat.6 S/FTP PIMF LSZH Patch Cable

Patch cable PIMF vor VoIP applications•Extremely short moulded strain relief with dip protection•Cat.6, 4 x 2 x AWG26/7, TIA/EIA 568B•UL/CSA certified•

Available lenghts in metres:1.0 - 2.0 - 3.0 - 6.0 - 10.0

VoIP Patch Cable Cat.6 S/FTP

Art.-No. ColourK2460.x black 2 x Cat.6 RJ45 plug•

Halogenfree•TIA/EIA 568B coded•Boot in protected design, compact, high packing density, improved handling•0.25 m only available in colour grey!•

Available lengths in metres:0.25 - 0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0

Patc

h Ca

ble C

at.6

a Patch Cable Cat.6a/Cat.6

Page 10: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

98 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 99

TWISTED PAIR

2 x Cat.5e RJ45 plug, PVC•Foil and braid shielded•Boot in protected design, compact, high packing density, improved handling•Halogenfree•TIA/EIA 568B coded•K5455.0.25: length 0.25 m, colour grey•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0

with length imprint on the bootK5455.x grey K5457.x yellow K5458.x redK5459.x blue K5460.x green K5456.x black

with length imprint on the bootK5453.x grey K5461.x green K5462.x blueK5463.x yellow K5464.x red K5465.x black

2 x Hirose TM11, Cat.5e, halogenfree•Double shielded (foil and braid)•TIA/EIA 568B coded•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0

with DRAKA SF/UTP 300 MHz cableK8017.x grey K8012.x red K8013.x greenK8014.x blue K8015.x yellow

Cat.5e Hirose TM11 Patch Cable

2 x Hirose TM11, Cat.5e, halogenfree•Foil shielded•TIA/EIA 568B coded•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0

with DRAKA F/UTP 300MHz cableK8452.x grey K8073.x yellow K8074.x blueK8075.x yellow K8076.x red K8072.x black

Cat.5e Hirose TM11 Patch Cable

2 x Hirose TM11,Cat.5e, PVC•Braid shielded•TIA/EIA 568B coded•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0

with Dätwyler S/UTP 5502 4P 300 MHz cableK8701.x grey K8702.x yellow K8703.x redK8704.x blue K8705.x black K8706.x green

2 x Cat.5e RJ45 plug, PVC•Foil shielded•Boot in protected design, compact, high packing density, improved handling•TIA/EIA 568B coded•K5455.0.25: Length 0.25 m, colour grey•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0

Moulded RJ45 plugs•Premium strain relief boot•Patented RJ45 plug connector for wire isolation ≥ 1.25 mm•Due to the equal insertion loss of AWG24/7 to AWG24/1 install cable, Cat.6 (TIA) •patch cable length up to 90 m, Class EA up to 80 m possibleOuter jacket in FR-PVC (flame-retardant) UL approved or optional LSZH respec-•tively PURPackaging: ring or drum•

Advantages compared to install cable with field assembled RJ45 plugs:More cable flexibility•Smaller bending radius•

Available lenghts in metres:20.0 - 30.0 - 40.0 - 50.0 - 60.0 - 70.0 - 80.0 - 90.0

Art.-No. ColourK5537GR.x grey

Cat.6a AWG24 S/FTP PIMF PVC Patch Cablepremium cable for industrial application

Especially suitable for PoE application•2 x RJ45 plug•Assignment 1:1•Colour grey•

Available lengths in metres:0.15 - 0.25

Art.-No. TypeK5453.x Cat.5e F/UTP Patch CableK5455.x Cat.5e SF/UTP Patch CableK5510.x CAT.6 S/FTP PIMF LSZH Patch Cable

0.15 / 0.25 metres - ideal for PoE

Cat.5e SF/UTP Patch Cable Cat.5e, F/UTP Patch Cable Cat.5e Hirose TM11 Patch Cable Cat.6/Cat.5e Patch Cable 0.15/0.25 mshort length - ideal for PoE application

➀ ... small bending radius ➁ ... high bending radius

Patc

h Ca

ble C

at.5

e Special Patch Cable

➀➁

Page 11: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

100 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 101

TWISTED PAIR

2 x Cat.5e RJ45 plug, PVC•Unshielded•TIA/EIA 568B coded•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0

Cat.5e UTP Patch Cable PVC

2 x Cat.6 RJ45 plug, LSZH•Unshielded•TIA/EIA 568B coded•

Available lengths in metres:1.0 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0

K8101GR.x grey K8101GN.x green K8101BL.x blueK8101GE.x yellow K8101RT.x red K8101WS.x whiteK8101SW.x black

Cat.6 UTP Patch Cable LSZH

2 x Cat.6 RJ45 plug, PVC•Unshielded•TIA/EIA 568B coded•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 30.0

K8100GR.x grey K8100GN.x green K8100BL.x blueK8100GE.x yellow K8100RT.x red K8100WS.x whiteK8100MA.x magenta K8100SW.x black K8100OR.x orange

Cat.6 UTP Patch Cable PVC

2 x Cat.6 RJ45 plug, halogenfree•Assignment 1-3, 2-6, 3-1, 4-7, 5-8, 6-2, 7-4, 8-5•

Available lengths in metres:0.5 - 1.0 - 2.0 - 3.0 - 5.0 - 10.0 - 15.0 - 20.0

Gigabit Crossover Cat.6, S/FTP PIMF Patch Cablewith length imprint on the boot

Art.-No. TypeK5509.x Cable red, RJ45 boot red 2 x Hirose TM21, Cat.6, halogenfree•

Assignment 1-3, 2-6, 3-1, 4-7, 5-8, 6-2, 7-4, 8-5•

Available lengths in metres:0.5 - 1.0 - 2.0 - 3.0 - 5.0 - 10.0 - 15.0 - 20.0

Art.-No. TypeK8066.x Cable grey, RJ45 boot red

Gigabit Crossover Cat.6, Hirose TM21 Patch Cablewith S/FTP PIMF DRAKA UC900 1000MHz patch cable

Cat.5e Gigabit Crossover Patch Cablewith SF/UTP 300 MHz cable

Art.-No. TypeK5450.x Cable grey, RJ45 boot red

2 x Hirose TM11, Cat.5e, halogenfree•Double shielded (foil and braid)•Assignment 1-3, 2-6, 3-1, 4-7, 5-8, 6-2, 7-4, 8-5•

Available lengths in metres:0.5 - 1.0 - 2.0 - 3.0 - 5.0 - 10.0 - 15.0 - 20.0

Art.-No. TypeK2793.x Cable red, RJ45 boot red

Cat.5e, Gigabit Crossover Hirose TM11 Patch Cablewith SF/UTP DRAKA UC300 MHz cable

2 x Hirose TM11, Cat.5e, halogenfree•Foil shielded•Assignment 1-3, 2-6, 3-1, 4-7, 5-8, 6-2, 7-4, 8-5•

Available lengths in metres:0.5 - 1.0 - 2.0 - 3.0 - 5.0 - 10.0 - 15.0 - 20.0

Art.-No. TypeK8449.x Cable grey, RJ45 boot red

Cat.5e, Gigabit Crossover Hirose TM11 Patch Cablewith F/UTP DRAKA UC300 MHz cable

2 x Cat.5e RJ45 plug•Double shielded (foil and braid)•Boot in protected design, compact, high packing density, improved handling•Assignment 1-3, 2-6, 3-1, 4-7, 5-8, 6-2, 7-4, 8-5•

Available lengths in metres:0.5 - 1.0 - 2.0 - 3.0 - 5.0 - 10.0 - 15.0 - 20.0

K8456.x K8456.x grey K8093.x green K8094.x blueK8095.x yellow K8096.x red K8092.x whiteK8091.x magenta K8098.x black K8099.x orange

10 Gigabit Ethernet Cat.6a 500 MHz patch cable•UTP 4 x 2 x AWG24/7 LSZH IEC332-1•RJ45 (50µ“), moulded strain relief•100% Cat.6 tested•100% Cat.6 tested (measuring protocol enclosed)•Serial number on cable and test protocol•

Available lengths in metres:1.0 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0

with test protocol Cat.6aK8103GR.x grey

Cat.6 UTP PREMIUM Patch Cable LSZH

2 x Cat.5e RJ45 plug, PVC, RJ45 boot red•Unshielded•Pin assignment 1-3, 2-6, 3-1, 4-7, 5-8, 6-2, 7-4, 8-5•

Available lengths in metres:0.5 - 1.0 - 1.5 - 2.0 - 3.0 - 5.0 - 7.5 - 10.0 - 15.0 - 20.0 - 25.0 - 30.0

Art.-No. ColourK8097.x grey

Cat.5e UTP Gigabit Crossover Cable PVC

Patc

h Ca

ble C

ross

over

Patch Cable UTP

Page 12: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

102 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 103

TWISTED PAIR

Drum sizes in metres:100.0 - 500.0 - 1000.0

Art.-No. Type99980.x 4 x 2 x AWG23/1 PIMF FRNC-B, 100 Ohm99980DX.x 2 x (4 x 2 x AWG23/1) PIMF FRNC-B, 100 Ohm99981.x 4 x 2 x AWG23/1 PIMF FRNC-C, 100 Ohm99981DX.x 2 x (4 x 2 x AWG23/1) PIMF FRNC-C, 100 Ohm ConstructionConnector Copper wire, bare, Ø 0.56 mm (AWG23) Insulation Foam-Skin Polyethylen, Ø 1.35 mm Stranding 2 lines to a pair Pair shielding Aluminium laminated plastic composite foil Stranding 4 pairs to a core (PIMF) Total shield Tinned copper braid (about 35% coverage) Protective sheath orange

Cat.7a Installation Cable S/FTP1000 MHz PIMF AWG23/1

500 / 1000 metres as drum 100 metres as ring

Delivery Packaging:

ApplicationPrimary (Campus); Sekundary (Riser); Tertiary (Horizontal)IEEE 802.3: 10Base-T; 100Base-T; 1000Base-T; 10GBase-TIEEE 802.5: 16 MB; ISDN; TPDDI; ATM

ConstructionConductor Copper wire, bare, Ø 0.56 mm (AWG23)Insulation Foam-Skin Polypropylen, Ø 1.35 mmStranding 2 cores to a pairPair shielding Aluminium-laminated plastic foil

Stranding to the core 4 pairs to the coreTotal shield Tinned copper braid, coverage ca. 40 % (99980.x) resp. 35 % (99981.x)Sheath FRNC, orange

Mechanical Specifications 99980.x 99981.x

Min. bending radiuswithout load ≥ 40 mm ≥ 60 mmwith load ≥ 80 mm

Temperature rangewhile operation -20°C up to +60°C * -20°C up to +60°C *

while installation 0°C up to +50°C 0°C up to +50°C* the use of PoE reduces the temperature range

Electrical Specifications at 20°C ± 5°C 99980.x 99981.x

Loop resistance ≤ 176 Ω/km ≤ 190 Ω/kmResistance unbalance ≤ 2 %Insulation resistance 500 V ≥ 2000 MΩ * km ≥ 5000 MΩ * kmCapacitance 800 Hz nom. 43 nF/kmCapacitance unbalance ≤ 1500 pF/km ≤ 1600 pF/kmNVP ca. 79 % ca. 78 %Impedance 100 MHz 100 Ω ± 15 ΩPropagation delay nominal < 427 ns / 100 mDelay skew nominal < 12 ns / 100 m < 20 ns / 100 mTest voltage core/core and core/shield 1000 V DC 1 minCoupling attenuation 1 MHz ≤ 20 mΩ/m ≤ 10 mΩ/m

10 MHz ≤ 30 mΩ/m ≤ 10 mΩ/m30 MHz ≤ 40 mΩ/m100 MHz ≤ 200 mΩ/m ≤ 30 mΩ/m

Technical DataArt.-No. Type Outer Diameter Fire Load Weight Copper Content Tensile Force

99980.x CAT7 PIMF 4x2x0.56 FRNC-B orange

mm MJ / km kWh / m kg / km kg / km N

7.0 590 0.17 65 26 11099981.x CAT7 PIMF 4x2x0.56 FRNC-C orange 7.7 640 0.18 60 26 120

99980DX.x CAT7 PIMF 2x(4x2x0.56) FRNC-B orange 7.2 / 15.0 1190 0.345 132 52 22099981DX.x CAT7 PIMF 2x(4x2x0.56) FRNC-C orange 7.9 / 16 1300 0.36 120 52 240

StandardsEN 50173-1; EN 50288-4-1ISO/IEC 11801; IEC 61156-5

Flame RetardanceFRNC-B IEC 60332-1; IEC 60754-2; IEC 61034 (99980.x)

FRNC-C IEC-60332-1; IEC 60332-3-24; IEC 60754-2; IEC 61034 (99981.x)

Inst

alla

tion

Cabl

e S/F

TPInstallation Cable S/FTP

Page 13: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

104 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 105

TWISTED PAIR

Drum sizes in metres:1000.0

Art.-No. Type99982.x J-02YSCH 4 x 2 x 0.64 PIMF FRNC-B, 100 Ohm ConstructionConnector Copper wire, bare, Ø 0.64 mm (AWG22) Insulation Foam-Skin Polyethylene Ø 1.6 mm Stranding 2 lines to a pair Pair shielding Aluminium laminated plastic composite foil Stranding 4 pairs to a core (PIMF) Total shield Copper braid tinned (about 65% coverage) Protective sheath FRNC-B, yellow

Cat.7+ Installation Cable S/FTP 1500 MHz AWG22/1

ApplicationTertiary Cabling (horizontal) for:IEEE 802.5; IEEE 802.3: 10Base-T; 100Base-T; 1000Base-T; 10GBase-T; 16 MB; ISDN; TPDDI; ATM CATV; broadband video; SOHO cabling

ConstructionConductor Copper wire, bare, ∅ 0.64 mm (AWG22)Insulation Foam-Skin Polypropylen, ∅ 1.6 mmStranding 2 core to the pairPair shielding Aluminium-laminated plastic composite foilStranding to the core 4 pairs to the coreTotal shield Tinned copper braid, coverage ca. 65 %Protective sheath LSHF, RAL1028 (melon yellow)

Mechanical SpecificationsMin. bending radius

without load ≥ 35 mmwith load ≥ 70 mm

Temperature rangewhile operation -20°C up to +60°Cwhile installation 0°C up to +50°C

Electrical Specifications at 20°C ± 5°CLoop resistance ≤ 118 Ω/kmResistance unbalance ≤ 2 %Insulation resistance 500 V ≥ 2000 MΩ * kmCapacitance 800 Hz nom. 43 nF/kmCabacitance unbalance ≤ 1500 pF/kmNVP ca. 80 %Impedance 100 MHz 100 Ω ± 5 ΩPropagation delay nominal < 427 ns / 100 mDelay skew nominal < 12 ns / 100 mTest voltage core/core and core/shield 1000 V DC 1 minCoupling attenuation 1 MHz ≤ 5 mΩ/m

10 MHz ≤ 5 mΩ/m30 MHz ≤ 10 mΩ/m100 MHz ≤ 20 mΩ/m

Technical DataArt.-No. Type Outer Diameter Fire Load Weight Copper Content Tensile Force

99982.x CAT7+ PIMF 4x2x0.56 FRNC-B yellowmm MJ / km kWh / m kg / km kg / km N

8.5 684 0.19 86 45 380

StandardsEIA/TIA 568 B-2.1;ISO/IEC 11801 2nd edition 9/2002EN 50173; EN-50288-4-1; IEC 61156-5; IEC 61156-7

Flame RetardanceFRNC-B IEC 60332-1; IEC 60754-2; IEC 61034

Delivery Packaging:100 metres as drum

Inst

alla

tion

Cabl

e S/F

TPInstallation Cable S/FTP

Page 14: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

106 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 107

TWISTED PAIR

Drum sizes in metres:100.0 - 500.0 - 1000.0

Art.-No. Type99979.x 4 x 2 x AWG23/1 PIMF FRNC-B, 100 Ohm99979DX.x 2 x (4 x 2 x AWG23/1) PIMF FRNC-B, 100 Ohm ConstructionConnector Copper wire, bare, Ø 0.56 mm (AWG23) Insulation Foam-Skin Polyethylen, Ø 1.35 mm Stranding 2 lines to a pair Pair shielding Aluminium laminated plastic composite foil Stranding 4 pairs to a core (PIMF) Total shield Aluminium laminated plastic composite foil Drain wire AWG26 tinned Protective sheath FRNC-B, blue

Cat.6a Installation Cable F/FTP 500 MHz AWG23/1

Delivery Packaging: 500 / 1000 metres as drum

Delivery Packaging: 100 metres as ring

ConstructionConductor Copper wire, bare, Ø 0.56 mm (AWG23)Insulation Foam-Skin Polypropylen, Ø 1.35 mmStranding 2 cores to the pairPair shielding Aluminium-laminated plastic composite foilStranding to the core 4 pairs to the coreTotal shield Aluminium-laminated plastic composite foil, drain wire AWG26, tinnedProtective sheath LSHF, RAL5025 blue

Mechanical SpecificationsMin. bending radius

without load ≥ 35 mmwith load ≥ 70 mm

Temperature rangewhile operation -20°C up to +60°Cwhile installation 0°C up to +50°C

Elektrical Specifications at 20°C ± 5°CLoop resistance ≤ 176 Ω/kmResistance unbalance ≤ 2 %Insulation resistance 500 V ≥ 2000 MΩ * kmCapacitance 800 Hz nom. 43 nF/kmCabacitance unbalance ≤ 1500 pF/kmNVP ca. 79 %Impedance 100 MHz 100 Ω ± 5 ΩPropagation delay nominal < 427 ns / 100 mDelay skew nominal < 12 ns / 100 mTest voltage core/core and core/shield 1000 V DC 1 minCoupling attenuation 1 MHz ≤ 50 mΩ/m

10 MHz ≤ 100 mΩ/m30 MHz ≤ 200 mΩ/m100 MHz ≤ 1000 mΩ/m

Technical DataArt.-No. Type Outer Diameter Fire Load Weight Copper Content Tensile Force

99979.x CAT7+ PIMF 4x2x0.56 FRNC-B bluemm MJ / km kWh / m kg / km kg / km N

6.5 501 0.139 44 24 10099979DX.x CAT7+ PIMF 2x(4x2x0.56) FRNC-B blue 6.5 / 13 1002 0.278 88 48 200

Flame RetardanceFRNC-B IEC 60332-1; IEC 60754-2; IEC 61034

ApplicationPrimary (Campus); Sekundary (Riser); Tertiary (Horizontal)IEEE 802.3: 10Base-T; 100Base-T; 1000Base-T; 10GBase-TIEEE 802.5: 16 MB; ISDN; TPDDI; ATM

StandardsEN 50173-1; EN 50288-4-1ISO/IEC 11801; IEC 61156-5

Inst

alla

tion

Cabl

e F/F

TPInstallation Cable F/FTP

Page 15: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

108 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 109

TWISTED PAIRPatch Cable UC900 SS27 4P PUR

Art.-No. Type99710.1 1000 metres ConstructionConnector Copper-litz wire, bare, Ø 0.42 mm (AWG27/7) Insulation Foam-Skin Polyethylen, Ø 0.98 mm Stranding 2 lines to a pair Pair shielding Aluminium laminated plastic composite foil Stranding 4 pairs to a core (PIMF) Total shield Copper braid tinned (about 65% coverage) Protective sheath PUR,red RAL3000

Flexible: Our flexible, oil-resistant and high abrasion-resistant CAT.7 patch cable, wich has been used for many years in various branches of industry, is pariculary suitable for applications involving movementChemical and mechanical resistance:Resistant to mineral oil, ASTM-oil and UV-radiation, high abrasion-resistantSuitable for outdoor use, however not for direct burial

Technical DataArt.-No. Type Product Name Colour Outer Diameter Fire Load Weight Copper Value Tensile Force

99710.x Li-02YSC11Y 4x2x0.42L PIMF UC900 SS27 4P PUR™mm MJ / km kWh / m kg / km kg / km N

rot 5.9 383 0.106 34 24 100

Especially suitable for industrial application due to Polyurethane jacket

Installation Cable UC900 SS23/1 4P PETM

Art.-No. Type99731.500 500 metres ConstructionConnector Copper wire, bare, Ø 0.56 mm (AWG23) Insulation Foam-Skin Polyethylen, Ø 1.40 mm Stranding 2 lines to a pair Pair shielding Aluminium laminated plastic composite foil Stranding 4 pairs to a core (PIMF) Total shield Copper braid tinned (about 65% coverage) Protective sheath PE, black, radial thickness 1.5 mm Operating temperature at rest -20°C up to +60°C Operating temperature moving 0°C up to +50°C

Robust: This product is based on the 4-pair Cat.7 PIMF cable UC900 SS23/1 and features a thickwalled polyethylene outer sheat suitable for direct burial,which reliably protects the internal components against damage by the surroun-ding material.

Technical DataArt.-No. Type Product Name Outer Diameter Weight Copper Value Tensile Force

99731.500 A-02YSC2Y 4x2x0,56 PiMF UC900 SS23 Cat.7 S/FTP 4P PEmm kg / km kg / km N8.4 95 38 340

Especially suitable for industrial application due to Polyurethane jacket

Art.-No. Type99732.100 100 metres99732.500 500 metres ConstructionConnector Copper wire, bare, Ø 0.56 mm (AWG23) Insulation Foam-Skin Polyethylen, Ø 1.40 mm Stranding 2 lines to a pair Pair shielding Aluminium laminated plastic composite foil Stranding 4 pairs to a core (PIMF) Total shield Copper braid tinned (about 65% coverage) Protective sheath Longitudinal alu strip, sealed with FRNC-sheath, black,

radial thickness 1.5 mm Operating temperature -20°C up to +60°C (operation) / 0°C up to +50°C (install.)

Universal: This cable is also constructed with the tried and tested Cat.7 PiMF cable UC900 SS23/1, but is additionally provided with a halogen-free, flame retardant and lateral watertight sheath, making it suitable for universal indoor and outdoor use.

Technische DatenArt.-No. Type Product Name Outer Diameter Fire Load Weight Copper Value Tensile Force

99732.x J/A-02YSC(L)H 4x2x0.56 PiMF

UC900 SS 23 Cat.7 S/FTP 4P(L)H

mm MJ / km kWh / m kg / km kg / km N9.5 878 0.244 98 38 350

Especially suitable for industrial application

UC900 SS23 Cat.7 PUR

Art.-No. Type99735.500 UC900 SS23 Cat.7 PUR ConstructionConnector Copper wire, bare, Ø 0.56 mm (AWG23) Insulation Foam-Skin Polyethylen, Ø 1.40 mm Stranding 2 lines to a pair Pair shielding Aluminium laminated plastic composite foil Stranding 4 pairs to a core (PIMF) Total shield Copper braid tinned Protective sheath PUR, green RAL 6018, oil-resistant

Technical DataArt.-No. Type Product Name Outer Diameter Fire Load Weight Copper Value Tensile Force

99735.x J-02YSC11Y 4x2x0.56 PIMFUC900 SS23 CAT.7 S/FTP 4P PUR

mm MJ / km kWh / m kg / km kg / km N7.5 1183 0.33 92 38 340

Especially suitable for industrial application due to Polyurethane jacket

Installation Cable UC900 SS23/1 4P (L)HTM

Patc

h-/In

stal

latio

n Ca

ble P

UR/P

E Installation Cable PUR/PE

Page 16: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

110 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 111

TWISTED PAIR

ApplicationFor the simultaneously transmission of TV - and Datasignals.Drop cables are used in TV signal distribution networks and as antenna cable for terrestric and satellite broadcast systems..The integrated CAT.7 Datacables are being used in the following applications: Primary (Campus), Secondary (Riser), Tertiary (Horizontal)IEEE 802.3: 10Base-T; 100Base-T; 1000Base-T; 10GBase-TIEEE 802.5: 16 MB; ISDN; TPDDI; ATMIEC/EN 60793, IEC/EN 60794

Cableconstruction - Coax10 AD10 AInternal Conductor Copper wire, solid, bare, ∅ 1.0 mmInsulation Foam-Skin Polyethylen, ∅ 4.65 mmExternal Conductor AI-PET-AI-foil, tinned copper braid, optical coverage (70 %), ∅ 5.5 mmSheath FRNC, 6.8 mm ± 0.2 mm white

Mechanical SpecificationsMin. bending radius without load ≥ 90 mm

with load ≥ 140 mmTemperature range while operation -20°C up to + 60°C *

while installation 0°C up to + 50°C

Technical DataArt.-No. Brandname Outer Diameter Weight Standard length Copper Content Tensile Force Storage

New Coax10 AD10 A+ U900 HS23 4P LSHF+ 4xSM BBXS TRX

mm kg / km m kg / km N15.4 x 8.6 130 500/1000 48.3 240 Inside

StandardsCoax10 AD 10 A : Shielding class A according to EN50117-2-1, EN50117-2-2, EN50117-2-4 and EN50117-2-5 as well EN50083-2/A1, EN50117-1,CAT.7 Kabel UC900 SS23 4P : EN50173-1; EN 50288-4-1, ISO/IEC 11801; IEC 61156-5

Flame RetardanceComplete Cable: IEC 60332-1

Cableconstruction - UC900 HS23 4PConductor Copper wire, bare, ∅ 0.56 mm (AWG23)Insulation Foam-Skin Polyethylen, ∅ 1.35 mmStranding 2 cores to a pairPair shielding Aluminium-laminated composite-plastic foilStranding to the core 4 pairs (PiMF) to the coreTotal shield Tinned copper braidSheath LSHF, orange, ∅ 7.2 mm

Construction - Fiber Optic JN-TRX with BendBright XS single modeFiber 4 fiber with fixed coating BendBrightXSInsulation Red, Green, Blue, VioletStranding Aramid yarnSheath Thermo-plastic material with high e-moduleSheath colour Yellow

Cableconstruction (complete) Item position 1 x Coax 10 AD 10 A + 1 x UC900 HS23 4P parallel side by side + 1 x FO made of 4 x SMBBXS, Dimensions: 15.4 mm x 8.6 mm

Hybrid Copper/FO - HF/Data cable

Art.-No. Type99736 Hybrid Cable Coax10 AD 10 A + UC900 HS23 4P LSHF + 4 x SM BBXS TRX Cable Construction (totally):1 x Coax10 AD 10 A + 1 x UC900 HS23 4P parallel side by side + 1 x FO made of 4 x SM BBXS, Dimensions: 15.4 mm x 8.6 mm

Especially suitable for application in private + multimedia area

Cat.5e Extension F/UTP

Art.-No. TypeK9200.50 Cat.5e installation section, 50 m on cable drumK9200.90 Cat.5e installation section, 90 m on cable drum

Robust special rubber cable drum, complete with FTP Cat.5e installation cable, •integrated outlet 1 x RJ45 with dust cap and 1 x RJ45 modular jackVery well suited to mobile use, for exhibitions, presentations, outside broadcasting •vans, measuring sections etc.A standardised installation section in accordance with „structured cabling Cat.5e“•

Cat.6 / Cat.6a Extension S/FTP PIMF

Art.-No. TypeK9201.50 Cat.6 / Cat.6a installation section, 50 m on cable drumK9201.90 Cat.6 / Cat.6a installation section, 90 m on cable drum

Robust special rubber cable drum, complete with Cat.7 S/FTP installation cable, •integrated outlet Cat.6a 1 x RJ45 with dust cap and 1 x Cat.6a RJ45Very well suited to mobile use, for exhibitions, presentations, outside broadcasting •vans, measuring sections etc.A standardised installation section in accordance with „structured cabling Cat.6/•Cat.6a“

Hybr

id M

ultim

edia

Cab

leRJ45 Extension

Page 17: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

112 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 113

TWISTED PAIRCat.6 Class E STP Mini Patch Panel

Art.-No. Type37653.1 8-port RJ4537648.1 12-Port RJ45

Class E (250 MHz) in accordance with ISO/IEC 11801 and EN50173•Fully shielded RJ45 jacks•Metal housing RAL7035•8-pole LSA terminals•Dimensions 8/12 port: W 247 x H 44 x D 116 mm•

Cat.5e STP Mini Patch Panel

Art.-No. Type37650.2 8-port RJ4537657.1 12-Port RJ45

ISO/IEC 11801, EN50173 TIA/EIA 568A•Fully shielded RJ45 jacks•Metal housing RAL7035•8-pole LSA terminal•Dimensions 8-port: 162 x 44.5 x 112 mm (WxHxD)•Dimensions 12-port: 212 x 44.5 x 130 mm (WxHxD)•

Cat.6 Class E STP Mini Patch Panelfor DIN rail mounting

Art.-No. Type37653.2 8-Port RJ45 for DIN Rail37648.2 12-Port RJ45 für DIN Rail

Class E (250 MHz) in accordance with ISO/IEC 11801 and EN50173•Fully shielded RJ45 jacks•Metal housing RAL7035•8-pole LSA terminals•Dimensions 8/12 port: W 247 x H 44 x D 116 mm•Adapter set for DIN rail mounting included in delivery•

Cat.5e STP Mini Patch-Panelfür Hutschienenmontage

Art.-No. Type37650.3 8-Port RJ45 for DIN Rail37657.2 12-Port RJ45 für DIN Rail

ISO/IEC 11801, EN50173 TIA/EIA 568A•Fully shielded RJ45 jacks•Metal housing RAL7035•8-pole LSA terminal•Dimensions 8-port: 162 x 44.5 x 112 mm (WxHxD)•Dimensions 12-port: 212 x 44.5 x 130 mm (WxHxD)•Adapter set for DIN rail mounting included in delivery•

Art.-No. Type ColourConnection top/bottom ET-25132V4 2-port flush-type RAL1013, pearl-whiteET-25133V4 2-port flush-type RAL9010, pure-whiteConnection right/left ET-25130V4 2-port flush-type RAL9010, pure-whiteET-25131V4 2-port flush-type RAL1013, pearl-white

Cat.6 De-Embedded 250 MHz Flush-Type Outlet, 1Gbitstandard

Cat.6 De-Embedded, 40° outlet, LSA IDC terminals•Fully shielded diecast housing•Labelling field with transparent cover•For installation in ducts and underfloor systems•Central plate conforms to DIN 49075, metal frame•Packing unit: 5 pieces•Surface mounting and cover plate 80 x 80 see below•

Art.-No. Type ColourConnection right/left ELN3150212 2-Port, f-m RAL9010, pure-whiteELN3150222 2-Port, f-m RAL1013, pearl-whiteELN3150213 2-Port, s-m RAL9010, pure-whiteELN3150223 2-Port, s-m RAL1013, pearl-white

ECOLAN Wall Plate, Cat.5eflush-mount/surface-mount, UTP

Modular outlets Cat.5e, flush-mounted (f-m) and surface-mounted (s-m)•Class D (100 MHz) ISO/IEC 11801 and EN50173•Solid diecast housing•

Cat.5e Flush-Mounted Outlets STP

Art.-No. Type Colour ConnectionET-25200 2-Port, f-m RAL1013, pearl-white right/leftET-25201 2-Port, f-m RAL9010, pure-white right/left

Modular outlets Cat.5e, flush-mounted•Fully-shielded diecast housing•For installation in ducts and underfloor systems•Surface-mounted possible in conjunction with the surface-mounting frame •ET-25074/84

Min

i Pat

ch-P

anel

Data Outlets

Page 18: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

114 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 115

TWISTED PAIRCat.6 & 5e UTP Patch Panel 19” 1U

Art.-No. Type Colour37584.1 24-Port UTP RJ45 Cat.5e RAL9005, black37585.1 24-Port UTP RJ45 Cat.6 RAL9005, black AccessoriesArt.-No. Accessories81022.100 Cable tie, L 100 mm, W 2.5 mm, 100 pcs.37520.2 RJ45 dummy plug black, 100 pcs.

37585.1:Class E (250 MHz) acc. ISO/IEC 11801 and EN50173•

37585.1 & 37584.1:Acc. to ISO/IEC 11801•24 x unshielded RJ45 jacks•8-pole LSA terminals vertical designed•19“ steel plate housing•

Cat.6 & 5e UTP Patch Panel 19” 2U

Art.-No. Type Colour37570.1 48-Port UTP RJ45, Cat.6 RAL9005, black37569.1 48-Port UTP RJ45, Cat.5e RAL9005, black AccessoriesArt.-No. Accessories81022.100 Cable tie, L 100 mm, W 2.5 mm, 100 pcs.37520.2 RJ45 dummy plug black, 100 pcs.

37570.1:Class E (250 MHz) acc. to ISO/IEC 11801 and EN50173•

37570.1 & 37569.1:Acc. to ISO/IEC 11801•48 x unshielded RJ45 jacks•8-pole LSA terminals vertical designed•19“ steel plate housing•

Cat.6 & 5e UTP Patch Panel 19” 1U

Art.-No. Type Colour37583.1 24-Port UTP RJ45 Cat.6 RAL7035, light grey37583SW.1 24-Port UTP RJ45 Cat.6 RAL9005, black37582.1 24-Port UTP RJ45 Cat.5e RAL7035, light grey37582SW.1 24-Port UTP RJ45 Cat.5e RAL9005, black AccessoriesArt.-No. Accessories81022.100 Cable tie, L 100 mm, W 2.5 mm, 100 pcs.37520.2 RJ45 dummy plug black, 100 pcs.

24 x unshielded RJ45 jacks•8-pole LSA terminals horizontal designed•19“ steel sheet housing•

37583.1 & 37583SW.1:Class E (250 MHz) acc. ISO/IEC 11801 and EN 50173•

Cat.6 Class E 48-Port STP Patch Panel 19” 1U

Art.-No. Type37687.1 48-Port RJ45, 1U, RAL7035 Accessories37520.2 RJ45 dummy plug black, 100 pcs.81022.100 Cable tie, L 100 mm, W 2.5 mm, 100 pcs.

Class E (250MHz) acc. to ISO/IEC 11801 and EN50173•48 x fully shielded RJ45 jacks•8-pole LSA terminal•19“ fully shielded steel plate housing•Strain relief via cable ties•

KDO-Housing Surface-Mounted IP44

Art.-No. TypeET-25021 KDO housing, IP44 With label under clear cover•

Lockable•Colour similar RAL7035, light grey•Dimensions 93 x 93 x 85.5 mm / weight about 265 g•Suitable outlets: ET-25210, ET-25211, ET-25122...125•

Surface Frames for Data Outlets

Art.-No. Type Colour DimensionsET-25074 Surface-mounting frame RAL1013, pearl-white 80 x 80 x 40 mmET-25084 Surface-mounting frame RAL9010, pure-white 80 x 80 x 40 mm518985AV Cover plate RAL1013, pearl-white 80 x 80 mm518985AVR Cover plate RAL9010, pure-white 80 x 80 mm

Surface-mounting outlets can be combined from the flush-type outlets or the •installation duct types

Patc

h-Pa

nel +

Out

let H

ousin

gsPatch-Panel

Page 19: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

116 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 117

TWISTED PAIRCat.6 Snap-In Adapter

Art.-No. Type37486.1 STP modular adapter, shielded37488.1 UTP modular adapter, unshielded

Cat.6 RJ45 8/8 jacks 1:1 shielded•Snap-in mounting (Keystone)•For use in 37571.1, 37576.1, 37587.1, 37580.1, •37565.1, 37577.1, ET-25085, ET-25086

Crossover Adapter

Art.-No. Type37537.1 UTP Adapter, plug/jack Unshielded•

Assignment 1/2-3/6, 4/5-7/8•

Snap-In Adapters

Art.-No. Type37508.1 E-TA 8/8 - high grade steel37508.2 E-TA 8/8, RJ45

Jack/jack, shielded•1:1 wired•37508.1 suitable for 37571.1, ET-25085, ET-25086•37508.2 suitable for 37571.1, ET-25085, ET-25086, •37576.1, 37578.1, 37580.1

Cat.5e Modular Adapter

Art.-No. Type37529.1 E-TA 8/8MG RJ45, Plastic housing

metallised, RJ45 shielded, 1:137529.2 E-TA 8/8MG RJ45, Plastic housing

metallised, RJ45 shielded, cross

Jack/jack Cat.5e•1:1 wired•

Modular Adapters

Art.-No. Type37502.1 E-TA 6/6 unshielded, RJ1237503.1 E-TA 8/8 unshielded, RJ45 UTP37507.1 E-TA 8/8, RJ45 housing metallic

Jack/jack•1:1 wired•

Distribution Panel 19” 1U

Art.-No. Type37571.1 16-port, metallic37576.1 24-port, metallic37580.1 24-port, RAL9005 (black)37578.1 24-port, RAL7035 (light grey)

For modules in Keystone format•Incl. cable management•Without modules•

Art.-No. Type37577.1 16 x RJ45, 1U37565.1 24 x RJ45, 1U

Frame Set 2 x RJ45 Keystone Outlet

Art.-No. TypeET-25085 Colour RAL1013, pearl-whiteET-25086 Colour RAL1013, pearl-white

For RJ45 modules in Keystone format•Fixing frame with 80 x 80 cover + central plate 50 •x 50 mmWith dust caps•Without modules•

Blind Dummy Insert For Keystone Holes

Art.-No. Colour PU38018.1 white 10038018.2 black 100

To cover uninstalled ports•For RJ45 patch panel and outlets•

Blank Panel 19” 1Ufor modules in Keystone format

ECOLAN Keystone Jack, Cat.6RJ45-LSA, STP, De-Embedded

Art.-No. TypeELN336101 shielded, De-Embedded Keystone jack „SNAP-IN“•

Cat.6 component certified (Real Cat.6)•Suitable for AWG23-AWG26•LSA tool necessary•For installation in modular distribution panels with •up to 24-ports and 2-port outletsLSA terminal 568A/B coded•

ECOLAN Keystone Jack, Cat.6RJ45-LSA, UTP

Art.-No. TypeELN336001 unshielded, de-embedded Keystone jack „SNAP-IN“•

Cat.6 components certified (real Cat.6)•Suitable for AWG23-AWG26•LSA terminal 568A/B coded•For installation in modular distribution panels with •up to 24 ports and 2-port connection socketsClass E (250 MHz) acc. to ISO/IEC 11801 and •EN50173LSA tool necessary•

ECOLAN Keystone Jack, Cat.5eRJ45-LSA, UTP

Art.-No. TypeELN335001 unshielded

Keystone jack „SNAP-IN“•Suitable for AWG23-AWG26•For installation in modular distribution panels with •up to 24 ports and 2-port connection socketsLSA terminals 568A/B coded•LSA tool necessary•

ECOLAN Keystone Jack, Cat.5eRJ45-LSA, STP

Art.-No. TypeELN335101 shielded

Keystone jack „SNAP-IN“, RJ45•Suitable for AWG22-AWG26•For installation in modular distribution panels with •up to 24 ports and 2-port connection socketsLSA terminals 568A/B coded•LSA tool necessary•

ECOLAN Modular Coupler, Cat.6RJ45

Art.-No. TypeELN356001 Plastic housing black, Cat.6 RJ45

8/8 jacks UTPELN356101 Metal housing, Cat.6 RJ45 8/8

jacks STP

Jack/jack Cat.6•1:1 wired•

RJ45

Fron

t Pan

els,

Mod

ules

, Ada

pter

RJ45 Modules, Adapter

Page 20: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

118 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 119

TWISTED PAIR

Cat.6a Connection Module

Art.-No. Type37596.1 Cat.6a up to 600 MHz with LSA terminals The connection module can be used to extend installation cable or reconnect •

damaged cables without having to relay a complete cable segment.The two cable ends are connected with LSA insulation displacement terminals. •All standard 4- or 8-core installation cables from AWG 26-22 can be worked to a sheath diameter of 10 mm.

T-Modular Adapter

Art.-No. Type37528.1 ET-AT 8/8, RJ45 metalized plug37526.1 ET-AT 8/8, RJ45 ungeschirmt

Jack / 2 x jack•1:1 wired•8 x pin assignment•Also suitable for ISDN applications•

Modular Adapter RJ45 D-Sub

Art.-No. TypeETM23066 DB09 plug / RJ45 jackETM23067 DB09 jack / RJ45 jackETM23054 DB25 plug / RJ45 jackETM23055 DB25 jack / RJ45 jack

Freely configurable•Metallized housing•

RJ45 Dummy Plug Black 100 pcs.

Art.-No. Type37520.2 RJ45 dummy plug black, 100 pcs. Dust protection for unused ports•

For RJ45 patch panel and outlets•

Cat.6 Connection Module

Art.-No. Type37596.2 Cat.6 up to 250 MHz with LSA terminals The connecting module can be used to extend installation cables or recon-•

nect damaged cables without having to relay a complete cable segment.With adhesive tapes for fixing•Screw-type strain relief•Cable entry up to 7.5 mm•

Drum sizes in metres:100.0 - 1000.0

DRAKA UC900 1000 MHz PIMF S/FTP99701.x grey 99702.x yellow 99703.x red99704.x blue 99705.x black 99706.x green99707.x orange 99709.x erika-violet ConstructionConnector AWG 27/7 Pair shielding Aluminium laminated plastic

composite foil Stranding 4 pairs to the core (PIMF) Total shield Copper braid tinned (about

65% coverage) Protective sheath FRNC

Cat.7 Patch Cable

Drum sizes in metres:100.0 - 1000.0

Kerpen Megaline D1-20 SF/U Flex 4P H99526.x grey ConstructionConnector AWG 26/7 Stranding 4 pairs to the core Total shield Aluminium-coated plastic

composite foil and copper braiding, tinned

Protective sheath halogenfree

Cat.5e Patch Cable 200 MHz F/UTP

Drum sizes in metres:100.0 - 1000.0

DRAKA UC300 MHz F/UTP99158.x grey 99153.x green 99154.x blue99155.x yellow 99156.x red 99157.x black ConstructionConnector AWG 26/7 Stranding 4 pairs to the core Total shield Aluminium laminated plastic

composite foil, drain wire AWG26 tinned

Protective sheath FRNC

Cat.5e Patch Cable

Drum sizes in metres:100.0 - 1000.0

DRAKA UC300 MHz SF/UTP99258.x grey 99253.x green 99254.x blue99255.x yellow 99256.x red ConstructionConnector AWG 26/7 Stranding Zur Seele 4 Paare Total shield Aluminium-coated plastic

composite foil and copper braiding, tinned

Protective sheath FRNC

Cat.5e Patch Cable

Drum sizes in metres:100.0 - 1000.0

Kerpen Megaline F6-90 S/F Flex 4P H99620.x yellow 99621.x red 99622.x green99625.x blue 99628.x grey ConstructionConnector AWG 27/7 Pair shielding Aluminium laminated plastic

composite foil Stranding 4 pairs to the core (PIMF) Total shield Copper braid tinned Protective sheath FRNC

Cat.7 Patch Cable 600 MHz S/FTP

Drum sizes in metres:100.0 - 1000.0

Kerpen Megaline F10-120 S/F Flex 4P H99726.x grey ConstructionConnector AWG 26/7 Pair shielding Aluminium laminated plastic

composite foil Stranding 4 pairs to the core (PIMF) Total shield Copper braid tinned Protective sheath FRNC

Cat.7 Patch Cable 1200 MHz S/FTP

ESD - Housing

RJ45

Mod

ules

, Ada

pter

Patchk Cable Metresw

are

Page 21: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

120 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 121

TWISTED PAIR

Drum sizes in metres:100.0 - 1000.0

98711.x 98711.x grey 98712.x blue 98713.x yellow98714.x red 98715.x green 98716.x black ConstructionConnector Copper stranded wire, bare Ø 0.36 mm (AWG26/7) Pair shielding Aluminium laminated plastic composite foil Stranding 4 pairs to the core Total shield Copper braid tinned Protective sheath FRNC

Cat.7 Patch Cable - Dätwyler 7702 1200 MHz PIMF S/FTP

Drum sizes in metres:100.0 - 1000.0

98701.x grey 98702.x yellow 98703.x red98704.x blue 98705.x black 98706.x green ConstructionConnector AWG 26/7 Stranding 4 pairs to the core Total shield Copper braid tinned Protective sheath PVC 0.106 kWh/m

Cat.5e Patch Cable Dätwyler 300 MHz S/UTP

Drum sizes in metres:1000.0

Art.-No. Type99956.x 4 x 2 x AWG26/7 SF/UTP PVC, 100MHz ConstructionConnector Copper stranded wire, bare Ø 0.36 mm (AWG26/7) Insulation Foam-Skin Polyethylen Stranding 2 lines to a pair Stranding 4 pairs to a core Total shield Aluminium laminated plastic foil and braiding Protective sheath PVC, grey

Cat.5e Patch Cable SF/UTP PVC UL Approved

Drum sizes in metres:100.0 - 1000.0

Art.-No. Colour99148.x grey ConstructionConnector AWG 26/7 Stranding 2 lines to a pair Total shield -/- Protective sheath PVC

Cat.5e Patch Cable U/UTP

Cat.6a Hirose TM31 RJ45 plug STPComplete plug (incl. strain relief boot & guide plate)

Art.-No. Colour PUH7642.1 beige 100H7642.4 black 100H7642.5 yellow 100H7642.6 red 100H7642.7 blue 100H7642.8 green 100H7642.10 orange 100H7642.12 lightgrey 100

Channel Class Ea up to 500 MHz (Cat.6a) for stranded wires (AWG 24/7), (AWG •26/7), (AWG 27/7)Core insulation about 0.9 - 1.0 mm•Cable diameter max. 6.6 mm•Suitable crimping tool DCW1002 + DCW1002.1•

Cat.6 Hirose TM21 RJ45 plug STPComplete plug (incl. strain relief boot & guide plate)

Art.-No. Colour PUH7641.1 beige 100H7641.4 black 100H7641.5 yellow 100H7641.6 red 100H7641.7 blue 100H7641.8 green 100H7641.10 orange 100H7641.12 lightgrey 100

Channel class E up to 250 MHz (Cat.6) for stranded wires (AWG 24/7, AWG 26/7, •AWG 27/7)Core insulation about 0.9 - 1.0 mm•Cable diameter max. 6.6 mm•Suitable crimping tool DCW1002 + DCW1002.1•

Strain Relief Boot Hirose Angled 90° Black

Art.-No. Type PU37549.1 Strain relief boot Hirose, angled 90° left/right 137549.2 Strain relief boot Hirose, angled 90° top/bottom 1

Cat.5e Hirose TM11 RJ45 Plug STP

Art.-No. Type Colour PU37541.S TM11 RJ45 plug - 10037541.P Guide plate - 100 AccessoriesArt.-No. Accessories PU37540.1 Strain relief boots, beige 10037540.4 Strain relief boots, black 10037540.5 Strain relief boots, yellow 10037540.6 Strain relief boots, red 10037540.7 Strain relief boots, blue 10037540.8 Strain relief boots, green 10037540.10 Strain relief boots, orange 10037540.12 Strain relief boots, lightgrey 100H7540.1 Complete plug incl. crimpring & guide plate, black 100H7540.4 Complete plug incl. crimpring & guide plate, black 100H7540.5 Complete plug incl. crimpring & guide plate, yellow 100H7540.6 Complete plug incl. crimpring & guide plate, red 100H7540.7 Complete plug incl. crimpring & guide plate, blue 100H7540.8 Complete plug incl. crimpring & guide plate, green 100H7540.10 Complete plug incl. crimpring & guide plate, orange 100H7540.12 Complete plug incl. crimpring & guide plate, light grey 100

Suitable crimping tool DCW1002 + DCW1002.1•Cable entry max. 5.8 mm•

Also available in PU 10 pcs. and PU 50 pcs.

Patc

h Ca

ble M

etre

swar

e RJ45 Plugs + Strain Relief Boots

Page 22: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

122 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 123

TWISTED PAIR

Art.-No. Description PU37495.S SS37 plug incl. crimpring & guide plate, without strain relief 100 AccessoriesArt.-No. Accessories PU37546.1 Strain relief boots, white 10037546.4 Strain relief boots, black 10037546.5 Strain relief boots, yellow 10037546.6 Strain relief boots, red 10037546.7 Strain relief boots, blue 10037546.8 Strain relief boots, green 100

Art.-No. Description PU37515.T RJ45 plug & guide plate, without strain relief boot 100 AccessoriesArt.-No. Accessories PU37515.12 Strain relief boots, lightgrey 10037515.14 Strain relief boots, black 10037515.15 Strain relief boots, yellow 10037515.16 Strain relief boots, red 10037515.17 Strain relief boots, blue 10037515.18 Strain relief boots, green 100H7515.12 Complete plug incl. crimpring & guide plate, light grey 100H7515.14 Complete plug incl. crimpring & guide plate, black 100H7515.15 Complete plug incl. crimpring & guide plate, yellow 100H7515.16 Complete plug incl. crimpring & guide plate, red 100H7515.17 Complete plug incl. crimpring & guide plate, blue 100H7515.18 Complete plug incl. crimpring & guide plate, green 100

Cat.6 Stewart SS39200-012RJ45 plug STP

Art.-No. Type PU37563.T SS39 plug without boot 100 AccessoriesArt.-No. Accessories PU37515.22 Strain relief boots, lightgrey 10037515.24 Strain relief boots, black 10037515.25 Strain relief boots, yellow 10037515.26 Strain relief boots, red 10037515.27 Strain relief boots, blue 10037515.28 Strain relief boots, green 10037515.29 Strain relief boots, orange 10037515.30 Strain relief boots, darkgrey 10037515.31 Strain relief boots, white 10037515.32 Strain relief boots, lilac 100

Incl. crimping & guide plate•Cable entry max. 6.3 mm•Suitable crimping tool DCW1002 + DCW1002.2•

Cat.6 Stewart SS39200-007RJ45 plug STP

Art.-No. Type PU37560.T SS39 plug without boot 100 AccessoriesArt.-No. Accessories PU37515.12 Strain relief boots, lightgrey 10037515.14 Strain relief boots, black 10037515.15 Strain relief boots, yellow 10037515.16 Strain relief boots, red 10037515.17 Strain relief boots, blue 10037515.18 Strain relief boots, green 100

Incl. crimping & guide plate•Cable entry max. 5.84 mm•Suitable crimping tool 39946.1•

Cat.6 Stewart SS39100-007RJ45 plug UTP

Art.-No. Type PU37496.S SS39 plug with transparent boot 100 Incl. crimping & guide plate•

Cable entry max. 5.84 mm•Suitable crimping tool 39946.1•

Cable entry max. 5.72 mm•Suitable crimping tool 39946.1•

Cat.5e Stewart SS37 RJ45 Plug UTP

Cable entry max. 6.3 mm•Suitable crimping tool 39946.1•

Cat.6a RJ45-AMP EMT STP

Art.-No. Type PU37201.S AMP EMT without strain relief boot 100 Accessories37201.1 Strain relief boots, white 10037201.2 Strain relief boots, red 10037201.3 Strain relief boots, blue 10037201.4 Strain relief boots, green 10037201.5 Strain relief boots, yellow 10037201.6 Strain relief boots, black 10037201.7 Strain relief boots, grey 100

Cable diameters max. 6.0 mm•

Cat.6a / Cat.5e RJ45 Field Plugs

Art.-No. Type PU88030.1 Cat.5e RJ45 field plug 188031.1 Cat.6 RJ45 field plug, 10 GBit ready 1

88030.1: AWG 26/7 - 22/7, AWG 26/1 - 22/1, IP20, •cable jacket: 4.5 - 8.0 mm88031.1: AWG 26/7 - 22/7, AWG 24/1 - 22/1, IP20, •cable jacket: 5.5 - 8.5 mm

No special tool needed for installation, only screwdriver and diagonal cutter necessary

Strain Relief Bootsfor RJ45 plugs

Art.-No. Colour PU37546.1 beige 10037546.4 black 10037546.5 yellow 10037546.6 red 10037546.7 blue 10037546.8 green 100

Suitable for 37541.3, 37514.1, 37519.1, 37539.1, •37640.1, 37595.S, 37596.SCable entry max. 6.3 mm•

Cat.5e RJ45-Stewart SS37 STP

Art.-No. Type PUfor round cables, unshielded 37517.1 E-MO 4/4 SF RJ10 10037516.1 E-MO 8/8 SR RJ45 10037518.1 E-MO 6/6 SF RJ12 100ELN345001 E-MO 8/8 SR RJ45 10037539.1 E-MO 10/10 SF RJ69 100for flat cables, unshielded 37512.1 E-MO 4/4 SF RJ10 10037511.1 E-MO 6/4 SF RJ11 10037513.1 E-MO 6/6 SF RJ12 10037673.1 E-MO 8/4 SF RJ45 10037514.1 E-MO 8/8 SF RJ45 10037542.1 E-MO 6/6 SF DEC 100

Modular Plug UTP

Suitable crimping tool E-MUC410 (except 37539.1 •therefore 39930.1 + 39930.4)

ECOLAN Modular Plug, Cat.6RJ45

Art.-No. Description PUELN346101 E-MO 8/8 SF RJ45 STP 100 AccessoriesELN37546 Strain relief boots, beige 100ELN37547 Strain relief boots, black 100ELN37548 Strain relief boots, yellow 100ELN37549 Strain relief boots, red 100ELN37550 Strain relief boots, blue 100ELN37551 Strain relief boots, green 100

Suitable crimping tool DCW1003 + DCW1003.1•Cable diameter max. 6.2 mm•

ECOLAN Modular Plug, Cat.5eRJ45

Art.-No. Type PUELN345101 E-MO 8/8 SR RJ45 STP,

without boot100

37500.1 E-MO 6/6 SR-G RJ12, shielded special plug

100

37538.1 E-MO 10/10 SR-G RJ69, shielded special plug

100

AccessoriesELN37546 Strain relief boots, beige 100ELN37547 Strain relief boots, black 100ELN37548 Strain relief boots, yellow 100ELN37549 Strain relief boots, red 100ELN37550 Strain relief boots, blue 100ELN37551 Strain relief boots, green 100

Suitable crimping tool DCW1003 + DCW1003.1 •(except 37538.1)Suitable crimping tool for 37538.1 is 39930.1 + •39930.5Cable entry max. 6.3 mm•

RJ45

Plu

gs +

Str

ain

Relie

f Boo

tsRJ45 Plugs + Strain Relief Boots

Page 23: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

124 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 125

TWISTED PAIR

Art.-No. TypeTool Frames MMCW1002 Tool frame for die inserts MMCW1002.xMMCW1003 Tool frame for die inserts MMCW1003.xDie inserts MMCW1002.1 Die insert for Hirose TM11/TM21/TM31 RJ45 plugMMCW1002.2 Die inserts for Stewart SS39200-12 RJ45 Stecker (37563.T)MMCW1003.1 Die insert for RJ45 plugs ELN346101, ELN345101, ELN345001 AccessoriesArt.-No. Accessories39841.1 High-quality aluminium case for 2 crimping tools and 4 die inserts

Professional Crimping Tools for Hirose, Stewart...exchangeable die inserts

High precision, inserts made of hardened steel•Constant high quality and tolerances of the crimped connections•Very large number of crimpings, long life tool for professionals•Inserts DCW1002.x suitable for tool frame DCW1002•Inserts DCW1003.x suitable for tool frame DCW1003•High-quality aluminium case for transport and protection available as accessorie•

Crimping Toolfor modular plugs

Art.-No. TypeE-MUC410 for RJ plugs

For 4-, 6-, 6-DEC-, 8-, AMP, and the shielded RJ45 Far •East and for cutting and strippingIdeal for local assembly•Following plugs can be crimped: 37517.1, 37516.1, •37518.1, ELN345001, 37512.1, 37511.1, 37513.1, 37514.1, 37542.1, ELN345101, ELN346101

Crimping Toolfor RJ45 plug Hirose TM11 & TM21

Art.-No. Type39934.1 for RJ45 Hirose TM11 (Cat.5e)39934.2 for RJ45 Hirose TM21 (Cat.6)

For Crimping 8-pole Hirose plugs•Incl. strain relief crimping in one operation•Particularly suitable for local assembly•Without Accessories•

Crimping toolfor RJ45 Stewart

Art.-No. Type39946.1 for RJ45 plugs Stewart

For 8-pole Stewart plug•Recommended for field preassembling•The following plugs can be crimped: 37560.T, •37515.T

Crimping Toolfor modular plugs

Art.-No. TypeE-SK310 Crimping tool For crimping 4-pole, 6-pole, 8-pole, cutting and •

strippingIdeal for local assembly•Following plugs can be crimped: 37517.1, 37516.1, •37518.1, 37519.1, 37512.1, 37511.1, 37513.1, 37514.1, 37541.3, 37640.1

Crimping Toolfor modular plugs

Art.-No. TypeE-SK312 Crimping tool For crimping 8-pole plugs and for cutting and •

strippingIdeal for local assembly•The following RJ plugs can be crimped: 37519.1, •37514.1, 37541.2, 37541.3

LSA/IDC Insertion Tool

Art.-No. Type39933.1 Insertion tool39951.1 Krone insertion tool sensor

LSA Insertion tool for LSA terminals and simulta-•nious cutting

Stripping Tool For PIMF CableStripping tool

Art.-No. Type39910.1 Stripping tool

For removing of the outer jacket and pairs shielding of PIMF cables•

Step 1: 1 turn around

Step 2: strip insulation

Step 3: 1 turn around

Step 4: strip pair shielding

Tool

s Tools

Page 24: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

126 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 127

TWISTED PAIRQuickloader

Art.-No. TypeELN36102 Quickloader multi-bit screwdriverELN36103 31-piece bit set for Quickloader

Multi-bit screwdriver with multi-bit automatic magazine•Bit changing in less than 2 seconds•Including 6 bits (3 x cross-recess/ 3 x slotted)•each 1 x P1, P2, P3 (cross-recess)•each 1 x 1/4, 3/16, 1/8 (slotted)•31-piece bit set for Quickloader:• Pouch with belt clip•Magnetic extension with mechanical lock•5 x Phillips, 5 x slotted, 3 x Pozidrive, 7 x Torx, 10 x Hexagon•Phillips: 0 / 1 / 2 / 2R / 3 slotted: 3 / 4 / 5 / 6 / 8•Pozidrive: 1 / 2 / 3 Torx: T10 / T15 / T20 / T25 / T27 / T30 / T40•Hexagon: 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 / 7 / 8 / 10•

Quickloader MINIMulti-Bit Screwdriver

Art.-No. TypeELN36104 Quickloader mini multi-bit screwdriver Quickloader MINI•

Multi-Bit screw driver with multi bit automatic magazine•Bit changing in less than 2 seconds•Including 6 bits (3 x cross-recess / 3 x slotted)•

Diagonal Cutter110 mm angled blades, for copper wires up to 1.0 mm

Art.-No. Type39806.1 Diagonal cutter Extra slim design, universal application, ergonomic, soft plastic handles•

Cable Cutter

Art.-No. Type39912.1 Cable cutter For installation and patch cables•

For cutting and stripping the individual wires•

Cable Stripping Toolfor cable Ø 5.5 - 15 mm

Art.-No. Type39950.1 Stripping tool for cable Ø 5.5 - 15 mm Special shearing and insulation stripping tool for plastic-insulated data, communica-•

tion and control cablesBlades with special Titanium-Nitride coating (TIN) to achieve •longer life, faster cutting and less wearNo adjustment of cutting depth necessary•Additional wire stripping feature, range 0.2 - 4.0 mm• 2

With pocket clip•TÜV/GS-approved•Dimensions (LxWxH): 124 x 35 x 25 mm•Weight: 44.5 g•

Art.-No. Type39950.2 Stripping tool for cable Ø 4.5 - 10 mm Special sheating and insulation stripping tool for plastic-insulated CAT and •

twisted pair cablesBlades with special Titanium-Nitride coating (TIN) to achieve longer life, faster •cutting and less wearNo adjustment of cutting depth necessary•Additional wire stripping tool, range 0.8 - 1.5 mm• 2

With pocket clip•TÜV/GS-approved•Dimensions (LxWxH): 124 x 35 x 25 mm•Weight: 44 g•

Cable Stripping Toolfor cable Ø 4.5 - 10 mm

Cable Knivefor cable Ø 8 - 28 mm

Art.-No. Type39950.3 Cable Knife for Ø 8 - 28 mm For stripping all standard round cables•

Knifes with special Titan-Nitride coating (TIN) to achieve longer life, faster •cutting and less wearThe large adjustment screw allows effortless adjustments•Automatic adjustment from round- to length cut•The user benefits from a secure grip achieved by the •non-slip paddingIncluding TIN coated spare blade in the handle•TÜV/GS-approved•Dimensions (LxWxH): 132 x 29 x 35 mm•Weight: 75 g•

1. Insert the end of the cable

2. Cut Isolation by turning the tool

3. Remove cable isolation

1. Arrange the cable 2. Cut Isolation by turning the tool

3. Remove cable isolation

Tool

s Tools

Page 25: TWISTED PAIR - LanShop · 80 | Twisted Pair Twisted Pair | 81 TWISTED PAIR ... • No LSA tool necessary ... Twisted Pair | 85 TWISTED PAIR Art.-No. Type ET-25173.1 2-level frame

128 | Twisted Pair

www.efb-elektronik.de

Twisted Pair | 129

TWISTED PAIRPort Scout PS96 in Aluminium Case

Art.-No. TypeMMCW1001 Port Scout PS96

The Port scout PS96 is the ultimate device for mapping and •identifying network cables in an inactive network

No more cumbersome trial-and-error port identifications! •With the innovative Port Scout PS96 you can instantly and reliably identify bet-ween wall ports and patch panels without any problem!

Simply connect the power device to any wall port at your home/office and the •matching plug will light in the patch panel immediatly to confirm identification.

Application:

1. Plug and fill the patch panel with the ID plugs2. Connect the power device to the wall port3. Matching ID-plug will light in the patch panel4. Mark the name/number of the traced port on the patch panel5. Repeat points 2 to 4 until all port are identified

Product Specifications:

Patent Pending•100% reliable•No need to mark cables•Does not suffer from inductance•Save precious working time of your technicians•

Scope of Delivery:

96 x Plug for port identifying1 x Power device (4 x AA batteries required)1 x RJ45 to USB adapter cable1 x RJ45 female coupler for testing uses1 x Deluxe aluminium case

LANSmart Network Testerwith LC display, TDR technology

Art.-No. Type39978.1 RJ45 / 2 x alligator clip 0.2 metres Handy high-tech measuring for network professionals•

Technology: Time-domain reflectometer based•Cable length measurement possible without remote unit•RJ45 patch cable or raw cable measurable•Detects pinning, pair assignment, short-cuts•Port finder function: LANSmart makes the link LED of the hub/switch/MC/NIC •light upMaster and remote unit RJ45, plugable•LCD display: 122 x 32 dot matrix 56 mm x 29 mm•Measuring accuracy: Below 10 m +-2 m, above 10 m +-5%•Length measuring range: min.: 1 m - max.: 500 m•Tone generator: 1 kHz . Dimensions: 82 x 138 x 32 mm, 220 g•Power supply: 4.5 VDC (3 x AAA micro) (not included)•CE tested•

Art.-No. Type39939.1 LANTester network & modular cable, RJ11/12/45 LAN test kit, master and remote unit network and modular test cable, •

RJ11/12/45 local or remote connections can be testedSeperate LED for Pin 1 - 8 and ground•Each individual core is automatically scanned•Scan speed low/high, adjustable•Incl. black plastic case•Battery 9 V E-block not included•

LAN Tester

Art.-No. Type39938.1 Test device, remote-adapter, black case For structured cabling and patch cables•

Save expensive troubleshooting with a LAN analyzer•Standardisation TIA/EIA 568A, TIA/EIA 568B, 365A and Token Ring•

LAN Test Kit

Art.-No. Type39936.1 LANTest, network and modular cable Network and modular test•

Line tester for structured cabling and patch cables•Advantage: Not pairs only, but any individual core can be tested for assignment•For testing 10BaseT, 10Base2 Thin Ethernet (coax), RJ45 / RJ11modular cable •TIA-568A, 568B

LANTester Network

Tool

s Tools