CLEAN DESIGN - western-sales.com

CLEAN DESIGNCOMPATIBLE FIXTURES FOR GEBERIT INSTALLATION SYSTEMS

2

THE POSSIBILITIES...WALL-HUNG TOILET MODELS

Blu Bathworks www.blubathworks.comDevon & Devon www.devon-devon.comDuravit www.duravit.comIcera www.icerausa.comKallista www.kallista.comKohler www.us.kohler.comLacava www.lacava.comLaufen www.us.laufen.comNeo-Metro www.neo-metro.comTOTO www.totousa.comVilleroy & Boch www.villeroy-boch.com

Blu BathworksCocoMetrix

Devon & DevonBluesEtoileNew EtoileRoseClassicaWestminster

DuravitDarling NewD-CodeDuraStyleDuraStyle BasicHappy D.2P3 ComfortsStarck 2Starck 3Starck 3 compactVeroVero AirME by StarckViu

IceraClarityPiano

KallistaPleό

KohlerVeil

LacavaGiuliaNaviSuave

Laufen Kartell IlBagnoAlessi OneLaufen ProLaufen Pro SPalacePalombaValKartell

Neo-MetroEuro-UrbanMetaalminiLOO

TOTOAPEPMHRPSP

Villeroy & BochArchitecturaLa BelleMementoStradaSubway

3

...ARE GROWINGUNLOCK YOUR IMAGINATION LIKE NEVER BEFORE

DuravitVilleroy& Boch

BluBathworks™

LaufenDevon &

Devon

Icera

TOTO®

Lacava

Neo-Metro®

Kohler

Kallista

Geberit 2x4 in-wall system with Sigma50 flush plate and Villeroy & Boch Subway toilet

4

For a complete listing of wall-hung toilets compatible with the Geberit system — including WaterSense listed models — visit www.geberit.us. If you’re looking for more ideas and inspiration, use your smartphone to scan the code below or point your web browser to geberitnorthamerica.com/inspiration.

↑Geberit 2x6 in-wall system with Duravit Happy D.2 toilet

FREEDOM TO CREATE

CHOOSE ANY BOWL

When you install the Geberit system, you’re not just getting the best in-wall tank and carrier available. You get the design freedom that only Geberit offers: compatibility with all wall-hung toilets made by every major ceramic manufacturer. Beware of “proprietary” claims and dedicated bowl/carrier combinations. No other carrier gives you the flexibility of the Geberit system.

5

GEBERIT SYSTEMS:• achieve a clean, modern look• have a greater flexibility of

toilet placement in a bathroom

• improve accessibility, more open space and better hygiene

When you buy Geberit, you buy from the company that invented the in-wall toilet system. Go ahead and choose the perfect toilet for your new bathroom. Then, make sure Geberit is behind the wall.

↑Geberit 2x6 in-wall system with Sigma50 flush plate and Duravit toilet

WHY BUY GEBERITFor over 125 years, Geberit has focused on innovation, quality, and reliability. More than 50 years ago, Geberit introduced the first in-wall system. Ever since, the Geberit system has enabled designers and homeowners to create unique spaces by lifting the toilet off the floor.

6

* Consult toilet manufacturers for up-to-date model numbers and availability.** Meets 600 grams MaP performance score. *** Meets 800 grams MaP performance score.

Geberit Installation Systems and wall-hung toilet combinations marked with this symbol ( O ) in the table are compatible. Please note that all dimensions are approximations.

All toilet dimensions are shown as follows:

COMPATIBLE WALL-HUNG WASHDOWN TOILETS 1.28/0.8 GPF (4.8/3 LPF)

Brand Name Model Number* Model Name

111.902Toilet Carrier2x6 Stud Wall


111.018Toilet Carrier

Pre-WallLength Width Depth

(Toilet dimensions in inches) StyleDuravit 252909 ME by Starck I*** I I** 17-3/8 14-1/8 15-3/4 Round Front

252959 ME by Starck I I I 21-1/4 14-5/8 15-3/4 Elongated253009 ME by Starck I I I** 18-7/8 14-5/8 13-3/4 Round Front251109 Viu I I I** 22-1/2 14-5/8 14-1/4 Rectangular251159 Viu I I I** 22-1/2 14-5/8 14-1/4 Rectangular

TOTO CT426CFG#01 AP I I I 21-1/4 15 13-1/4 ElongatedCT426CFGT40#01 AP I I I 21-1/4 15 13-1/4 ElongatedCT428CFG#01 EP I** I** I** 21-1/4 15 13-1/4 ElongatedCT428CFGT40#01 EP I** I** I** 21-1/4 15 13-1/4 ElongatedCT437FG#01 MH I** I** I** 20-7/8 15-1/2 13-3/8 ElongatedCT437FGT20#01 MH I** I** I** 20-7/8 15-1/2 13-3/8 ElongatedCT447CFG#01 RP I I I 22-7/8 15 13-1/8 ElongatedCT447CFGT60#01 RP I I I 22-7/8 15 13-1/8 ElongatedCT449CFG#01 SP I I I 22-7/8 15 13-1/4 RectangularCT449CFGT60#01 SP I I I 22-7/8 15 13-1/4 Rectangular

Depthfrom rim

Width Length

Depthfrom rim

Width Length

ProjectionWidth

Length

55

65

0

40

04

30

ø3

5

45

25

35

0

320

7

† Pending WaterSense certification as of October 2020.



COMPATIBLE WALL-HUNG WASHDOWN TOILETS 1.28/0.8 GPF (4.8/3 LPF) WaterSense Listed






(Toilet dimensions in inches) StyleDuravit 252909† ME by Starck I*** I I** 17-3/8 14-1/8 15-3/4 Round Front

252959† ME by Starck I I I 21-1/4 14-5/8 15-3/4 Elongated253009† ME by Starck I I I** 18-7/8 14-5/8 13-3/4 Round Front251109† Viu I I I** 22-1/2 14-5/8 14-1/4 Rectangular251159† Viu I I I** 22-1/2 14-5/8 14-1/4 Rectangular

TOTO CT426CFG#01† AP I I I 21-1/4 15 13-1/4 ElongatedCT426CFGT40#01† AP I I I 21-1/4 15 13-1/4 ElongatedCT428CFG#01 EP I** I** I** 21-1/4 15 13-1/4 ElongatedCT428CFGT40#01 EP I** I** I** 21-1/4 15 13-1/4 ElongatedCT437FG#01 MH I** I** I** 20-7/8 15-1/2 13-3/8 ElongatedCT437FGT20#01 MH I** I** I** 20-7/8 15-1/2 13-3/8 ElongatedCT447CFG#01 RP I I I 22-7/8 15 13-1/8 ElongatedCT447CFGT60#01 RP I I I 22-7/8 15 13-1/8 ElongatedCT449CFG#01† SP I I I 22-7/8 15 13-1/4 RectangularCT449CFGT60#01† SP I I I 22-7/8 15 13-1/4 Rectangular

Depthfrom rim

Width Length

Depthfrom rim

Width Length

ProjectionWidth

Length

55

65

0

40

04

30

ø3

5

45

25

35

0320

8 8

COMPATIBLE WALL-HUNG WASHDOWN TOILETS 1.6/0.8 GPF (6/3 LPF)



The information contained in this document is subject to change without notice.






(Toilet dimensions in inches) StyleBlu Bathworks LW6008 Coco I I I 22 14 14-1/4 Elongated

LW6030A Coco I I I 21-1/4 14-1/4 12-1/4 ElongatedLW6020A Metrix I I I 21-1/2 14-1/4 13 Elongated

Devon & Devon WCSBLU Blues I I I 21-7/8 14 14-3/8 Round FrontWCSNET Etoile I I I 21-1/2 15-3/16 14 Round FrontWCSET New Etoile I I I 21-1/2 15-3/16 14 Round FrontWCSRO Rose I I I 21-5/8 14 14-3/4 Round Front

Duravit 253509 D-Code I*** I I 21-1/2 14 13-3/8 Round Front254409 Darling New I** I I 24-5/8 14-3/8 13-5/8 Elongated254459 Darling New I** I I 24-5/8 14-3/8 13-5/8 Elongated254509 Darling New I I I 21-1/4 14-3/8 13-5/8 Round Front256309 Darling New I*** I I 22-1/2 14-3/8 14-3/4 Round Front256359 Darling New I*** I I 22-1/2 14-3/8 13-5/8 Round Front253609 DuraStyle I I I 21-1/4 14-1/8 13-5/8 Rectangular253709 DuraStyle I** I I** 24-3/8 14-5/8 13-5/8 Elongated253759 DuraStyle I** I I** 24-3/8 14-3/4 13-5/8 Elongated253809 DuraStyle I I I 21-1/4 14-5/8 13-3/4 Rectangular253909 DuraStyle I*** I I 18-7/8 14-5/8 13-3/4 Rectangular254209 DuraStyle I*** I I 24-3/8 14-5/8 13-3/4 Elongated254259 DuraStyle I*** I I 24-3/8 14-3/4 13-3/4 Elongated255109 DuraStyle I I I 21-1/4 14-5/8 14 Rectangular257109 DuraStyle I*** I I 18-7/8 14-5/8 14 Rectangular256209 DuraStyle Basic I*** I I 21-1/4 14-3/8 13-3/4 Round Front222209 Happy D.2 I I I 21-1/4 14-3/8 13-1/8 Rectangular255009 Happy D.2 I I I 24-3/8 14-3/8 13-5/8 Elongated255059 Happy D.2 I*** I I 24-3/8 14-5/8 13-5/8 Elongated256109 P3 Comforts I*** I I 22-1/2 15 14 Rectangular256159 P3 Comforts I*** I I 22-1/2 15 14 Rectangular253309 Starck 2 I I I 24-3/8 14-3/4 13-1/4 Elongated253359 Starck 2 I I I 24-3/8 14-3/4 13-1/4 Elongated253409 Starck 2 I I I 21-1/4 14-5/8 13 Round Front222509 Starck 3 I*** I I 21-1/4 14-1/8 12 Round Front222609 Starck 3 I I I 24-3/8 14-5/8 13-5/8 Elongated222659 Starck 3 I I I 24-3/8 14-5/8 13-5/8 Elongated252709 Starck 3 I*** I I 21-1/4 14-1/8 13-3/8 Round Front222709 Starck 3 compact I I I 19-1/8 14-1/8 13-3/8 Round Front221709 Vero I I I 21-1/2 14 13-5/8 Rectangular252509 Vero Air I*** I I 22-1/2 14-5/8 14 Rectangular252559 Vero Air I*** I I 22-1/2 14-5/8 14 Rectangular

Icera C-6610 Clarity I I I 22-1/4 14-5/8 14-1/2 ElongatedC-2370 Piano I I I 21-1/8 14-5/8 14-3/4 Round Front

Kallista P70360-00-0 Pleό I I I 21 14-1/4 13 ElongatedKohler K-6299 Veil I I I 21 15-1/8 13-3/4 Elongated

K-6300 Veil I I I 21 15-1/8 13-3/4 ElongatedLacava 5051WC Giulia I I I 22 14 14 Round Front

5051WC-MB Navi I I I 19-3/4 14 13 Round Front6058.1 Suave I I I 22 15-1/2 14-1/4 Round Front

Laufen 820338 Kartell I** I** I 21-1/2 14-9/16 15 Round Front820339 Kartell I I I 21-1/2 14-9/16 15 Round Front820978 IlBagnoAlessi One I I** I 23 15-3/8 14 Elongated820950 Laufen Pro I*** I I 22-1/16 14-3/16 15-3/4 Round Front820968 Laufen Pro I I I 20-7/8 14-3/16 13-5/8 Round Front820969 Laufen Pro I I I 20-7/8 14-3/16 13-5/8 Round Front820963 Laufen Pro S I** I** I 20-7/8 14-3/8 13-3/4 Rectangular820708 Palace I I I 22-1/16 14-3/16 15 Rectangular820808 Palomba I** I I 21-1/4 14-3/16 15 Round Front820288 Val I I I 20-7/8 15-3/8 13-1/2 Round Front

Depthfrom rim

Width Length

Depthfrom rim

Width Length

ProjectionWidth

Length

55

65

0

40

04

30

ø3

5

45

25

35

0

320

99







(Toilet dimensions in inches) StyleNeo-Metro 8951-W-1 Euro-Urban I I I 23 13-3/4 14 Elongated

8957 Metaal I I I 29-1/4 15 14 Elongated8952 miniLOO I I I 20-1/2 13-3/4 14-1/8 Round Front

Villeroy & Boch 4688 UR XX Architectura I** I I 22-13/16 16-1/8 13-3/8 Elongated5864 U1 XX Architectura I I I 20-7/8 14-5/8 13 Round Front5627 U1 XX La Belle I I I 23 15-1/8 16-1/2 Rectangular5628 U1 XX Memento I I I 22 14-3/4 16-1/8 Rectangular6661 U0 XX Strada I I I 23-5/8 14-5/8 13-3/4 Round Front4609 UR XX Subway I** I I 22-7/8 16-1/8 13-1/8 Round Front5600 U0 XX Subway I I I 22-1/4 14-3/4 14-1/8 Round Front5614 UR XX Subway I I I 22 14-5/8 14-3/8 Round Front

COMPATIBLE WALL-HUNG WASHDOWN TOILETS 1.6/0.8 GPF (6/3 LPF) (continued)



Depthfrom rim

Width Length

Depthfrom rim

Width Length

ProjectionWidth

Length

55

65

0

40

04

30

ø3

5

45

25

35

0

320

10


COMPATIBLE WALL-HUNG WASHDOWN TOILETS1.6/0.8 GPF (6/3 LPF) WaterSense Listed








(Toilet dimensions in inches) StyleDuravit 253509 D-Code I 21-1/2 14 13-3/8 Round Front

254409 Darling New I** 24-5/8 14-3/8 13-5/8 Elongated254459 Darling New I** 24-5/8 14-3/8 13-5/8 Elongated254509 Darling New I *** 21-1/4 14-3/8 13-5/8 Round Front253609 DuraStyle I 21-1/4 14-1/8 13-5/8 Rectangular253709 DuraStyle I** 24-3/8 14-5/8 13-5/8 Elongated253809 DuraStyle I 21-1/4 14-5/8 13-3/4 Rectangular254209 DuraStyle I *** 24-3/8 14-5/8 13-3/4 Elongated254259 DuraStyle I *** 24-3/8 14-3/4 13-3/4 Elongated255109 DuraStyle I 21-1/4 14-5/8 14 Rectangular256209 DuraStyle Basic I *** 21-1/4 14-3/8 13-3/4 Round Front222209 Happy D.2 I 21-1/4 14-3/8 13-1/8 Rectangular255009 Happy D.2 I 24-3/8 14-3/8 13-5/8 Elongated255059 Happy D.2 I *** 24-3/8 14-5/8 13-5/8 Elongated256109 P3 Comforts I *** 22-1/2 15 14 Rectangular256159 P3 Comforts I *** 22-1/2 15 14 Rectangular253309 Starck 2 I 24-3/8 14-3/4 13-1/4 Elongated253359 Starck 2 I 24-3/8 14-3/4 13-1/4 Elongated253409 Starck 2 I 21-1/4 14-5/8 13 Round Front222509 Starck 3 I *** I 21-1/4 14-1/8 12 Round Front222609 Starck 3 I I 24-3/8 14-5/8 13-5/8 Elongated222659 Starck 3 I 24-3/8 14-5/8 13-5/8 Elongated252709 Starck 3 I *** 21-1/4 14-1/8 13-3/8 Round Front222709 Starck 3 compact I 19-1/8 14-1/8 13-3/8 Round Front221709 Vero I 21-1/2 14 13-5/8 Rectangular

Kohler K-6299 Veil I I 21 15-1/8 13-3/4 ElongatedK-6300 Veil I I 21 15-1/8 13-3/4 Elongated

Lacava 5051WC Giulia I 22 14 14 Round Front6058.1 Suave I 22 15-1/2 14-1/4 Round Front

Laufen 820338 Kartell I** I** 21-1/2 14-9/16 15 Round Front820339 Kartell I I 21-1/2 14-9/16 15 Round Front820978 IlBagnoAlessi One I I** 23 15-3/8 14 Elongated820950 Laufen Pro I *** I 22-1/16 14-3/16 15-3/4 Round Front820968 Laufen Pro I I 20-7/8 14-3/16 13-5/8 Round Front820969 Laufen Pro I I 20-7/8 14-3/16 13-5/8 Round Front820963 Laufen Pro S I** I** 20-7/8 14-3/8 13-3/4 Rectangular820708 Palace I I 22-1/16 14-3/16 15 Rectangular820808 Palomba I** I 21-1/4 14-3/16 15 Round Front820288 Val I I 20-7/8 15-3/8 13-1/2 Round Front

Villeroy & Boch 4688 UR XX Architectura I** 22-13/16 16-1/8 13-3/8 Elongated5864 U1 XX Architectura I 20-7/8 14-5/8 13 Round Front5627 U1 XX La Belle I 23 15-1/8 16-1/2 Rectangular5628 U1 XX Memento I 22 14-3/4 16-1/8 Rectangular4609 UR XX Subway I** 22-7/8 16-1/8 13-1/8 Round Front5600 U0 XX Subway I 22-1/4 14-3/4 14-1/8 Round Front5614 UR XX Subway I 22 14-5/8 14-3/8 Round Front

Depthfrom rim

Width Length

Depthfrom rim

Width Length

ProjectionWidth

Length

55

65

0

40

04

30

ø3

5

45

25

35

0

320

11

1 Check water consumption. Washdown style bowls must flush with 1.28 GPF (4.8 LPF)

or 1.6 GPF (6 LPF) single flush, 1.28/0.8 GPF (4.8/3 LPF) or 1.6/0.8 GPF (6/3 LPF) dual-flush. If you do not know your water consumption, go to Step 5.

KNOW YOUR WATER CONSUMPTION? GO TO STEP 2.

2 How many mounting holes? Wall-hung bowls come with several mounting hole styles –

4 hole, 3 hole and 2 hole.

Bowls compatible with Geberit systems have 2 mounting holes.

HAVE 2 MOUNTING HOLES? GO TO STEP 3.

3 Where does water go into bowl? Typically from above (exposed) or from behind (hidden) for

wall-hung bowls.

Bowls compatible with Geberit systems have a hidden water supply from behind.

HAVE CONCEALED WATER SUPPLY FROM BEHIND? GO TO STEP 4.

4 Check dimensions. If you get to this point, the final step is to check the following

dimensions: a) Mounting dimensions b) Water supply inlet dimensions c) Waste outlet dimensions

IF YOU END HERE WITHOUT A MATCH, GO TO STEP 5.

a) Mounting dimensions

b) Water supply inlet dimensions

c) Waste outlet dimensions

5 Contact us. 800/TEC-TRUE [email protected]

Syphonic bowl (four holes) Blowout bowl (three holes) Washdown bowl (two holes)

≤ 31/8" (≤ 80 mm) or > 31/8" (> 80 mm)*

71/8" ± 1/4" (180 ± 5 mm) or 91/16" ± 1/4" (230 mm ± 5 mm)

(X) 13/8" ± 1/4" (35 ± 5mm)

(Y) 315/16" ± 1/4" (100 mm ± 5 mm)

(Z) 55/16" ± 1/8" (135 mm ± 3 mm)Ø1” ± 1/8"

(25 ± 3 mm)

Ø4” ± 1/4" (102 ± 5 mm)

≥ Ø515/16"(≥ 150 mm)

≥15/8"(≥ 40 mm)

* > 31/8" (>80 mm) is permissible provided that additional mounting parts are recommended or supplied by the manufacturer.

-0-1-2-3-4-5 -0 -2

5-5 -7

5-1 2

5-5 -7

5-2 2

5-5 -7

5-3

7.625” – 6.625” (180 mm + 15 mm –

180 mm - 10 mm)

3/4"

5/8"

1/2"

3/8"1/8"

Max 251/2" (650 mm)

a) 3-1/2" – 13" (90 mm – 330 mm)for M8 threaded stud

b) Water supply inlet

21/4" – Ø25/8" (58 mm – 67 mm)

≥ 1”(≥ 25 mm)

≥ 5/8" (≥ 15 mm)

Detail

c) Waste outlet Trap outlet

Ø1” ± 1/8" (25 ± 3 mm)


≤ 31/8" (≤ 80 mm) or > 31/8" (> 80 mm)*

71/8" ± 1/4" (180 ± 5 mm) or 91/16" ± 1/4" (230 mm ± 5 mm)

(X) 13/8" ± 1/4" (35 ± 5mm)

(Y) 315/16" ± 1/4" (100 mm ± 5 mm)

(Z) 55/16" ± 1/8" (135 mm ± 3 mm)Ø1” ± 1/8"

(25 ± 3 mm)

Ø4” ± 1/4" (102 ± 5 mm)

≥ Ø515/16"(≥ 150 mm)

≥15/8"(≥ 40 mm)


-0-1-2-3-4-5 -0 -2

5-5 -7

5-1 2

5-5 -7

5-2 2

5-5 -7

5-3

7.625” – 6.625” (180 mm + 15 mm –

180 mm - 10 mm)

3/4"

5/8"

1/2"

3/8"1/8"

Max 251/2" (650 mm)



21/4" – Ø25/8" (58 mm – 67 mm)

≥ 1”(≥ 25 mm)

≥ 5/8" (≥ 15 mm)

Detail


Ø1” ± 1/8" (25 ± 3 mm)


≤ 31/8" (≤ 80 mm) or > 31/8" (> 80 mm)*

71/8" ± 1/4" (180 ± 5 mm) or 91/16" ± 1/4" (230 mm ± 5 mm)

(X) 13/8" ± 1/4" (35 ± 5mm)

(Y) 315/16" ± 1/4" (100 mm ± 5 mm)

(Z) 55/16" ± 1/8" (135 mm ± 3 mm)Ø1” ± 1/8"

(25 ± 3 mm)

Ø4” ± 1/4" (102 ± 5 mm)

≥ Ø515/16"(≥ 150 mm)

≥15/8"(≥ 40 mm)


-0-1-2-3-4-5 -0 -2

5-5 -7

5-1 2

5-5 -7

5-2 2

5-5 -7

5-3

7.625” – 6.625” (180 mm + 15 mm –

180 mm - 10 mm)

3/4"

5/8"

1/2"

3/8"1/8"

Max 251/2" (650 mm)



21/4" – Ø25/8" (58 mm – 67 mm)

≥ 1”(≥ 25 mm)

≥ 5/8" (≥ 15 mm)

Detail


Ø1” ± 1/8" (25 ± 3 mm)


≤ 31/8" (≤ 80 mm) or > 31/8" (> 80 mm)*

71/8" ± 1/4" (180 ± 5 mm) or 91/16" ± 1/4" (230 mm ± 5 mm)

(X) 13/8" ± 1/4" (35 ± 5mm)

(Y) 315/16" ± 1/4" (100 mm ± 5 mm)

(Z) 55/16" ± 1/8" (135 mm ± 3 mm)Ø1” ± 1/8"

(25 ± 3 mm)

Ø4” ± 1/4" (102 ± 5 mm)

≥ Ø515/16"(≥ 150 mm)

≥15/8"(≥ 40 mm)


-0-1-2-3-4-5 -0 -2

5-5 -7

5-1 2

5-5 -7

5-2 2

5-5 -7

5-3

7.625” – 6.625” (180 mm + 15 mm –

180 mm - 10 mm)

3/4"

5/8"

1/2"

3/8"1/8"

Max 251/2" (650 mm)



21/4" – Ø25/8" (58 mm – 67 mm)

≥ 1”(≥ 25 mm)

≥ 5/8" (≥ 15 mm)

Detail


Ø1” ± 1/8" (25 ± 3 mm)


≤ 31/8" (≤ 80 mm) or > 31/8" (> 80 mm)*

71/8" ± 1/4" (180 ± 5 mm) or 91/16" ± 1/4" (230 mm ± 5 mm)

(X) 13/8" ± 1/4" (35 ± 5mm)

(Y) 315/16" ± 1/4" (100 mm ± 5 mm)

(Z) 55/16" ± 1/8" (135 mm ± 3 mm)Ø1” ± 1/8"

(25 ± 3 mm)

Ø4” ± 1/4" (102 ± 5 mm)

≥ Ø515/16"(≥ 150 mm)

≥15/8"(≥ 40 mm)


-0-1-2-3-4-5 -0 -2

5-5 -7

5-1 2

5-5 -7

5-2 2

5-5 -7

5-3

7.625” – 6.625” (180 mm + 15 mm –

180 mm - 10 mm)

3/4"

5/8"

1/2"

3/8"1/8"

Max 251/2" (650 mm)



21/4" – Ø25/8" (58 mm – 67 mm)

≥ 1”(≥ 25 mm)

≥ 5/8" (≥ 15 mm)

Detail


Ø1” ± 1/8" (25 ± 3 mm)



≤ 31/8" (≤ 80 mm) or > 31/8" (> 80 mm)*

71/8" ± 1/4" (180 ± 5 mm) or 91/16" ± 1/4" (230 mm ± 5 mm)

(X) 13/8" ± 1/4" (35 ± 5mm)

(Y) 315/16" ± 1/4" (100 mm ± 5 mm)

(Z) 55/16" ± 1/8" (135 mm ± 3 mm)Ø1” ± 1/8"

(25 ± 3 mm)

Ø4” ± 1/4" (102 ± 5 mm)

≥ Ø515/16"(≥ 150 mm)

≥15/8"(≥ 40 mm)


-0-1-2-3-4-5 -0 -2

5-5 -7

5-1 2

5-5 -7

5-2 2

5-5 -7

5-3

7.625” – 6.625” (180 mm + 15 mm –

180 mm - 10 mm)

3/4"

5/8"

1/2"

3/8"1/8"

Max 251/2" (650 mm)



21/4" – Ø25/8" (58 mm – 67 mm)

≥ 1”(≥ 25 mm)

≥ 5/8" (≥ 15 mm)

Detail


Ø1” ± 1/8" (25 ± 3 mm)

HOW CAN I TELL IF A WALL-HUNG TOILET IS COMPATIBLE?With Geberit in-wall systems 111.335, 111.902, 111.798, 111.597, 111.012 or 111.018

12

COMPATIBLE FLOOR-MOUNT WASHDOWN TOILETS



Brand Name Model Number* Model Name 109.304 109.797

Length Width Depth

(Toilet dimensions in inches) StyleDevon & Devon WCBTWBLU Blues I I 20-3/8 14 15-3/4 Round Front

WCBTWCLA Classica I I 20-5/8 14-1/4 15-1/2 Round FrontWCBTWET Etoile I I 19-1/4 15-3/8 15-3/4 Round FrontWCBTWNET New Etoile I I 20-1/4 14 15-3/4 Round FrontWCBTWROS Rose I I 20-1/4 14-3/16 15-3/16 Round FrontWCBTWWES Westminster I I 21-1/2 14-3/8 15-1/2 Round Front

Duravit 216909 ME by Starck I I 17-3/8 14-1/8 15-3/4 Round Front216959 ME by Starck I I 21-1/4 14-5/8 15-3/4 Elongated

Laufen 823338 Kartell I I 22-1/8 14-5/8 16-15/16 Round FrontNeo-Metro 8951-W-2 Euro-Urban I I 23 13-3/4 14 ElongatedVilleroy & Boch 6607 U1 XX Subway I I 22-1/2 14-5/8 15-3/4 Round Front

Depthfrom rim

Width Length

1.6/0.8 GPF (6/3 LPF)


Brand Name Model Number* Model Name 109.307

Length Width Depth

(Toilet dimensions in inches) StyleDuravit 216909 ME by Starck I 17-3/8 14-1/8 15-3/4 Round Front

216959 ME by Starck I 21-1/4 14-5/8 15-3/4 Elongated

Depthfrom rim

Width Length

1.28/0.8 GPF (4.8/3 LPF) WaterSense Listed


Brand Name Model Number* Model Name 109.307

Length Width Depth

(Toilet dimensions in inches) StyleDuravit 216909 ME by Starck I 17-3/8 14-1/8 15-3/4 Round Front

216959 ME by Starck I 21-1/4 14-5/8 15-3/4 Elongated

Depthfrom rim

Width Length

1.28/0.8 GPF (4.8/3 LPF)


Brand Name Model Number* Model Name 109.304 109.797

Length Width Depth

(Toilet dimensions in inches) StyleLaufen 823338 Kartell I I 22-1/8 14-5/8 16-15/16 Round Front

Depthfrom rim

Width Length

1.6/0.8 GPF (6/3 LPF) WaterSense Listed

* Consult toilet manufacturers for up-to-date model numbers and availability.** Meets 800 grams MaP performance score.


13

HOW CAN I TELL IF A FLOOR-MOUNT TOILET IS COMPATIBLE?With Geberit in-wall flushing system 109.304, 109.307 or 109.797

1 Check water consumption. Washdown style bowls must flush with 1.6 GPF (6 LPF) single

flush or 1.6/0.8 GPF (6/3 LPF) dual-flush. If you do not know your water consumption, go to Step 5.


2 Where does water go into bowl? Typically from above (exposed) or from behind (hidden). Bowls compatible with Geberit systems have a hidden water

supply from behind.

HAVE CONCEALED WATER SUPPLY FROM BEHIND AND WITHOUT FLUSHOMETER SPUD? GO TO STEP 3.

3 Check dimensions. a) Connection orientation b) Water supply inlet dimensions c) Waste outlet dimensions


a) Connection orientation




Blowout bowl (three holes)

Ø4” ± 1/4" (102 ± 5 mm)

≥ Ø515/16"(≥ 150 mm)

≥15/8"(≥ 40 mm)

-0-1-2-3-4-5 -0 -2

5-5 -7

5-1 2

5-5 -7

5-2 2

5-5 -7

5-3

7.625” – 6.625” (180 mm + 15 mm –

180 mm - 10 mm)

Syphonic bowl (four holes)

21/4" – Ø25/8" (58 mm – 67 mm)

≥ 1”(≥ 25 mm)

≥ 5/8" (≥ 15 mm)

Water supply inlet

Waste outlet

Detail


Ø4” ± 1/4" (102 ± 5 mm)

≥ Ø515/16"(≥ 150 mm)

≥15/8"(≥ 40 mm)

-0-1-2-3-4-5 -0 -2

5-5 -7

5-1 2

5-5 -7

5-2 2

5-5 -7

5-3

7.625” – 6.625” (180 mm + 15 mm –

180 mm - 10 mm)


21/4" – Ø25/8" (58 mm – 67 mm)

≥ 1”(≥ 25 mm)

≥ 5/8" (≥ 15 mm)

Water supply inlet

Waste outlet

Detail


Ø4” ± 1/4" (102 ± 5 mm)

≥ Ø515/16"(≥ 150 mm)

≥15/8"(≥ 40 mm)

-0-1-2-3-4-5 -0 -2

5-5 -7

5-1 2

5-5 -7

5-2 2

5-5 -7

5-3

7.625” – 6.625” (180 mm + 15 mm –

180 mm - 10 mm)


21/4" – Ø25/8" (58 mm – 67 mm)

≥ 1”(≥ 25 mm)

≥ 5/8" (≥ 15 mm)

Water supply inlet

Waste outlet

Detail


Ø4” ± 1/4" (102 ± 5 mm)

≥ Ø515/16"(≥ 150 mm)

≥15/8"(≥ 40 mm)

-0-1-2-3-4-5 -0 -2

5-5 -7

5-1 2

5-5 -7

5-2 2

5-5 -7

5-3

7.625” – 6.625” (180 mm + 15 mm –

180 mm - 10 mm)


21/4" – Ø25/8" (58 mm – 67 mm)

≥ 1”(≥ 25 mm)

≥ 5/8" (≥ 15 mm)

Water supply inlet

Waste outlet

Detail


14


COMPATIBLE WALL-HUNG URINALS0.5 GPF (2 LPF) WaterSense Listed

Brand Name Model Number* Model Name111.625

Urinal CarrierProjection Length Width

(Urinal dimensions in inches)

Duravit 082135 Starck 3 I 13-3/4 22-5/8 13280930 ME by Starck I 13-3/4 23 11-3/4280032 Vero I 12-5/8 21-7/8 11-5/8280132 Vero I 12-5/8 21-7/8 11-5/8

Depthfrom rim

Width Length

Depthfrom rim

Width Length

ProjectionWidth

Length

55

65

0

40

04

30

ø3

5

45

25

35

0

320

Depthfrom rim

Width Length

Depthfrom rim

Width Length

ProjectionWidth

Length

55

65

0

40

04

30

ø3

5

45

253

50

320

Geberit Installation Systems and wall-hung urinal combinations marked with this symbol ( O ) in the table are compatible. Please note that all dimensions are approximations.

All urinal dimensions are shown as follows:

*Consult urinal manufacturers for up-to-date model numbers and availability.

1 Check water consumption. Syphonic style urinals must flush with 0.5 GPF (2 LPF) or

less. If you do not know your water consumption, go to Step 4.


2 Check physical features of urinal for compatibility with the Geberit in-wall urinal system.

a) Urinals do not have integral traps or flushometers b) Urinals are not mounted with wall hangers c) Urinal water supply does not enter through top If urinal features are compatible, go to Step 3.

a)Urinalsdonothaveintegraltrapsorflushometers

b) Urinals are not mounted with wall hangers

c) Urinal water supply does not enter through top.

15

HOW CAN I TELL IF A WALL-HUNG URINAL IS COMPATIBLE?With Geberit in-wall system 111.625

3 Check dimensions. Check the following hole locations and verify they fall

within the dimensions in the drawing below. a) Mounting dimensions b) Water supply inlet dimensions c) Waste outlet dimensions d) Must accept accessory plastic trap dimensions

indicated below


a) Mounting dimensions



d) Accessory trap dimensions


Support

Wall

Wall Hangers131/2"

(343 mm)

Installed Wall Hangers

Integral traps

Flushometers

Ø11/2" – 15/16" (Ø37 mm – 33 mm)

≥ 3/4" (≥ 20 mm)

Ø2" – 17/8"Ø52 mm - 48 mm)

>111/16" (> 42 mm)>13/16" (> 30 mm)

WaterSupply

Inlet

WasteOutlet

611/16"(170 mm)

315/16"(100 mm)

Ø2"(Ø50 mm)

23/8" (60 mm)

Ø2" (50 mm)

Ø35/16" (80 mm)

Inlet Ø2"(50 mm)

13/8" (35 mm)19/16"(40 mm)


≤ 31/8" (≤ 80 mm) or > 31/8" (> 80 mm)*

71/8" ± 1/4" (180 ± 5 mm) or 91/16" ± 1/4" (230 mm ± 5 mm)

(X) 13/8" ± 1/4" (35 ± 5mm)

(Y) 315/16" ± 1/4" (100 mm ± 5 mm)

(Z) 55/16" ± 1/8" (135 mm ± 3 mm)Ø1” ± 1/8"

(25 ± 3 mm)

Ø4” ± 1/4" (102 ± 5 mm)

≥ Ø515/16"(≥ 150 mm)

≥15/8"(≥ 40 mm)


-0-1-2-3-4-5 -0 -2

5-5 -7

5-1 2

5-5 -7

5-2 2

5-5 -7

5-3

7.625” – 6.625” (180 mm + 15 mm –

180 mm - 10 mm)

3/4"

5/8"

1/2"

3/8"1/8"

Max 251/2" (650 mm)



21/4" – Ø25/8" (58 mm – 67 mm)

≥ 1”(≥ 25 mm)

≥ 5/8" (≥ 15 mm)

Detail


Ø1” ± 1/8" (25 ± 3 mm)

Ø11/2" – 15/16" (Ø37 mm – 33 mm)

≥ 3/4" (≥ 20 mm)

Ø2" – 17/8"Ø52 mm - 48 mm)

>111/16" (> 42 mm)>13/16" (> 30 mm)

WaterSupply

Inlet

WasteOutlet

611/16"(170 mm)

315/16"(100 mm)

Ø2"(Ø50 mm)

23/8" (60 mm)

Ø2" (50 mm)

Ø35/16" (80 mm)

Inlet Ø2"(50 mm)

13/8" (35 mm)19/16"(40 mm)

Ø11/2" – 15/16" (Ø37 mm – 33 mm)

≥ 3/4" (≥ 20 mm)

Ø2" – 17/8"Ø52 mm - 48 mm)

>111/16" (> 42 mm)>13/16" (> 30 mm)

WaterSupply

Inlet

WasteOutlet

611/16"(170 mm)

315/16"(100 mm)

Ø2"(Ø50 mm)

23/8" (60 mm)

Ø2" (50 mm)

Ø35/16" (80 mm)

Inlet Ø2"(50 mm)

13/8" (35 mm)19/16"(40 mm)

© 2

02

0 G

eber

it. G

NA

70

87

10

/20

© 2020 Geberit. Product information and specifications subject to change without notice.

Geberit North America is part of the Geberit Group, a European market leader and global provider of sanitary technology. Located in Des Plaines, Illinois, Geberit North America provides concealed tank and carrier systems for wall-hung and floor-mounted toilets and fixtures. Geberit systems improve the look of any bathroom by hiding the unsightly toilet tank. Replacing a standard tank and toilet with the Geberit system results in more usable space, improved hygiene and better accessibility. The unique dual-flush valve saves water and is practically maintenance free. Geberit also offers cable-controlled bath waste and overflows in a variety of designer finishes. Critical working parts are outside the waterway, ensuring years of trouble-free operation.

For more information, contact your Geberit sales representative, call 800/566-2100 or go to geberit.us

Geberit2100 S. Clearwater DriveDes Plaines, IL 60018USA

P 800-566-2100F 847-849-1845

www.geberit.us

Documents

CLEAN DESIGN - western-sales.com