BioCoir

Advanced GeoSynthetic Solutions™

FEATURES AND BENEFITS

n Biodegradable

n Promotes growth of vegetation

n Aesthetic advantages over synthetic products

n Protects exposed soil from wind and water

n Suppresses weeds

n Retains moisture

n Made from sustainable natural coconut fibres

n Available in two grades BC300 and BC450

n Ground staples/pins also available

Typical installation guidelines over page

Biodegradable Coconut Matting for Erosion and Sediment Control

Cirtex BioCoir is a biodegradable coconut fibre matting for erosion and sediment control and landscaping applications. Cirtex BioCoir is ideal for protecting cut faces and exposed soil from erosion from wind and water.

Subject to Cirtex Industries Limited standard terms and conditions, available on request. Specifications are subject to change without notice. © Copyright 2012 all rights reserved.

Prepare the ground by clearing away any rocks and

debris and level as much as possible to ensure the

BioCoir will have good ground contact.

On slopes, anchor the matting in a 150mm trench

at the top of the slope and roll down the slope,

overlapping rolls by 100mm.

Pin the BioCoir to the ground with Cirtex 230mm

Ground Staples, using 1 staple per m² on flat and

gentle slopes, and up to 4 staples per m² on steeper

slopes. BioCoir can be hydroseeded if required.

INSTALLATIONAPPLICATIONS n Steepened slopesn Road, rail and sound barrier embankmentsn Low flow stormwater channelsn Culvert outlets and washout drains n Highly erodible soilsn Heavy rainfall areas n Coastal and seashore protectionn Parks, Amenity areas, Golf courses and

Sports groundsn Quarries and landfillsn Facing for the DuraMesh Reinforced Soil System