Upload
dokhanh
View
214
Download
0
Embed Size (px)
Citation preview
Page 1 of 17
CIN:- U74140DL2010PTC201479
PT SCHEDULE 2016 - 2017 GLOBAL PT PROVIDER PVT. LTD.
E-41, Okhla Industrial Area, Phase – II, New Delhi – 110020 Phone: 9873001545/9582999061;Fax: 011-40503150
Email: [email protected] [email protected]
Web: www.globalptprovider.com
PROFICIENCY TESTING
REFERENCE MATERIAL
TRAINING
India’s First NABL
Accredited PT Provider in
the Field of Metal Testing
Page 2 of 17
CIN:- U74140DL2010PTC201479
About us
GLOBAL PT Provider is the India's first NABL accredited PT Provider as per
ISO 17043:2010 in the field of metal testing.
The purpose of the proficiency testing is to check lab performance by means
of inter-lab comparison. It includes inter-laboratory comparison exercise in
which homogeneous samples are circulated to the participating laboratories;
results are then collected and evaluated centrally.
GPTP is now preparing Reference Material of Metals, Trace Metals in Water,
Coal & Coke, Mineral & Ores, Petroleum Products, Rubber & Polymer,
Cement & Fly Ash, Pesticides, Insecticides. These CRM will be prepared in
accordance with ISO guide 34 & will be available soon.
Also Global PT Provider has a aim to start Providing Training in the field of Quality Management System, Measurement of uncertainty, Analytical testing, Calibration, Proficiency Testing, Reference Material Producer by a team of Experience persons.
Global PT Provider aims to get NABL accreditation for Reference
Material Producer as per ISO Guide-34
Expand the scope of Proficiency testing in the field of Chemical &
Mechanical Testing, Electrical Testing.
Provide the excellent Training services in the field of Quality
Management System, Analytical testing, Measurement of Uncertainty,
Calibration, Proficiency Testing, Reference material Producer
Our vision
Page 3 of 17
CIN:- U74140DL2010PTC201479
Online-Registration
Visit www.globalptprovider.com;
Select the PT program from On-going / Up-coming Program
Schedule;
Click on Register Here;
Fill up the Registration Form;
Registration conformation and Login ID & Password received
through mail;
Login ID & Password have to be used for revisit;
Registration through PTC
send your consent/query for required PT program on below
email ID: [email protected] /
PTC will send you the Registration Form (RF) for required PT
program;
Hard copy of duly filled registration form send back to PTC
immediate after received of RF.
After getting hard copy of RF (Filled up) from your side, a
conformation mail for registration will be sent to your email ID.
[For each PT program, Registration Forms are different but registration
procedure is same as above]
Registration Procedure
Page 4 of 17
CIN:- U74140DL2010PTC201479
Global PT Provider (P) Limited has successfully completed 23 PT programs, 12 PT Programs are ongoing & also announced 29 new Proficiency testing program for 2015. We have tried to cover maximum industries to provide excellent proficiency testing programs.
Potential Benefits of the Participating in a PT Program:-
Confirming competent in methods and procedures Confirming competent in manpower; Confirming competent in operating machine; Identifying testing or measurement problems Improving performance Imparting confidence in staff, management and external users of
laboratory services Comparing operator capabilities Generating reference materials Determining method precision and accuracy Satisfying regulatory and accreditation bodies requirements
PROFICIENCY TESTING
Page 5 of 17
CIN:- U74140DL2010PTC201479
1. Chemical Testing of Aluminum Alloy
2. Chemical Testing of Steel Alloy
3. Chemical Testing of Copper Alloy
4. Chemical Testing of Stainless Steel
5. Rockwell Hardness Number of Steel
6. Tensile Properties of Steel
7. Chemical Testing of Low Alloy Steel
8. Chemical Testing of Stainless Steel
9. Vickers Hardness Number (HV-5) of Steel
10. Chemical Testing of Aluminum Alloy
11. Rockwell Hardness Number of Steel
12. Heavy Metals in Water
13. Chemical Testing of Low Alloy Steel
14. Chemical Testing of Stainless Steel
15. Chemical Testing of Zinc Alloy
16. Chemical Testing of Aluminum Alloy
17. Analytical Quality Control (AQC/Water)
18. Tensile Properties of Steel
19. Mechanical Properties of Tor Steel
20. Chemical Composition Copper Alloy
21. Chemical Composition of Tool Steel
22. Vickers Hardness of Steel(HV-30)
23. Brinnell Hardness of Steel (HBW)
Completed PT Programs
Page 6 of 17
CIN:- U74140DL2010PTC201479
“PT Parameters can be excluded or included on the basis of Participant’s
or Stakeholders’ requirement at commencement of the PT Program”
Ongoing PT Programs in the Field of
Chemical and Mechanical Testing
VICKERS HARDNESS OF STEEL (HV-30) PT Scheme Code: PTM/MECH/05/14-15 PT Parameters: Vickers Hardness Number (HV-30) Method: IS 1500 (P-1):2013 Participation Fees: INR 12,000/- + S.T. @ 14.5%
CHEMICAL COMPOSITION OF TOOL STEEL PT Scheme Code: PTM/CHEM/10/14-15 PT Parameters: C, Si, Mn, S, P, Cr, Ni, Mo, V, W, Co Method: OES Method Participation Fees: INR 12,000/- + S.T. @ 14.5%
BRINNELL HARDNESS OF STEEL PT Scheme Code: PTM/MECH/07/14-15 PT Parameters: Brinnell Hardness (HBW) Method: IS 1500 (P-1):2013 Participation Fees: INR 12,000/- + S.T. @ 14.5%
Page 7 of 17
CIN:- U74140DL2010PTC201479
“PT Parameters can be excluded or included on the basis of Participant’s
or Stakeholders’ requirement at commencement of the PT Program”
IMPACT TESTING OF STEEL SAMPLES AS PER ASTM A370-14 & ASTM E23-12C
PT Scheme Code: PTM/MECH/04/14-15 PT Parameters: Charpy Impact Testing (V Notch) Method: ASTM A370 -14 & ASTM E23-12c Participation Fees: INR 25,000/- + S.T. @ 14.5%
CHEMICAL COMPOSITION OF LOW ALLOY STEEL PT Scheme Code: PTM/CHEM/01/16-17 PT Parameters: C, Si, Mn, S, P, Cr, Ni, Mo, Al, Cu Method: IS 228/ASTM E 415:2014/ Any Validated
Instrumental Method
ROCKWELL HARDNESS NUMBER (HRB) OF STEEL PT Scheme Code: PTM/MECH/08/14-15 PT Parameters: Rockwell Hardness Number (HRB) Method: IS 1586 (P-1):2012 Participation Fees: INR 12,000/- + S.T. @ 14.5%
ROCKWELL HARDNESS NUMBER (HRC) OF STEEL PT Scheme Code: PTM/MECH/09/14-15 PT Parameters: Rockwell Hardness Number (HRC) Method: IS 1586 (P-1):2012 Participation Fees: INR 12,000/- + S.T. @ 14.5%
Page 8 of 17
CIN:- U74140DL2010PTC201479
“PT Parameters can be excluded or included on the basis of Participant’s
or Stakeholders’ requirement at commencement of the PT Program”
HEAVY METALS IN WATER II PT Scheme Code: PTW/WATER/03/14-15 PT Parameters: Cu, Mn, Cd, Ni, Cr, Pb, Zn, B, Al, Na, K,
Ag, Ba, Fe; Method: AAS/ICP
Participation Fees: INR 15,000/- + S.T. @ 14.5%
ANALYTICAL QUALITY CONTROL (AQC/WATER)-II PT Scheme Code: PTW/WATER/01/15-16 PT Parameters: pH, Conductivity, Total Hardness, Chloride,
Fluoride, Sulphate, Nitrate, Calcium, Magnesium, Hexavalent Chromium, Total Suspended Solids
Methods: IS:3025 (P-11,14,21,32,60,24,34,40,46,52,15) / APHA 22nd EDD (P- 2510-B,2340-C, 4500-FD, 4500-E, P-4500-N03-B, P-3500 cr.B, 2540-D):2012
Participation Fees: INR 15,000/- + S.T. @ 14.5%
CHEMICAL PARAMETERS OF MILK POWDER PT Scheme Code: PTF/CHEM/01/14-15 PT Parameters: Moisture, Total Solids, Fat, Total Ash,
Titrable Acidity, Insolubility Index Methods: IS 11623:2008; IS 11721:2013; IS 1165 :2002; IS
12759: 1989
Participation Fees: INR 10,000/- + S.T. @ 14.5%
Page 9 of 17
CIN:- U74140DL2010PTC201479
“PT Parameters can be excluded or included on the basis of Participant’s
or Stakeholders’ requirement at commencement of the PT Program”
PROFICIENCY TESTING ON TEXTILE TESTING
PT Scheme Code: PTT/CHEM/01/14-15 Chemical PT Parameters: Colorfastness to Laundering,
Colorfastness to Rubbing, Colorfastness to Perspiration, Colorfastness to Light, Blend Composition
Method: ISO 105 C10-C3; ISO 105x12/IS 766; ISO 105 E 04/IS 971; ISO 105 B 02/IS 245; ISO 1833/IS 3416;
Participation Fees: INR 7,500/- + S.T. @ 14.5%
PT Scheme Code: PTT/MECH/01/14-15 Mechanical PT Parameters: GSM (Weight per unit area), Width,
Tensile Strength, Tear Strength, Linear Density of Yarn (Removed Fabric)
Method: ASTM D 3776/D3776M or ISO 3801 or IS 1964; ASTM D 3774/ISO 22198/IS 1954; ISO 13934-1/IS 1969; ASTM D1424/ISO 13937-1/IS 6489; ISO 7211-5/IS 3442
Participation Fees: INR 7,500/- + S.T. @ 14.5%
PROFICIENCY TESTING ON COAL TESTING PT Scheme Code: PTC/COAL/01/14-15 PT Parameters: Moisture Content, Volatile Matter, Ash
Content, Calorific Value Method: IS 1350 (P-1):1984 (RA 2007), IS 1350 (P-2):1975
(RA 2010)
Participation Fees: INR 10,000/- + S.T. @ 14.5%
Page 10 of 17
CIN:- U74140DL2010PTC201479
“PT Parameters can be excluded or included on the basis of Participant’s
or Stakeholders’ requirement at commencement of the PT Program”
Upcoming PT Programs in the Field
of CHEMICAL TESTING
CHEMICAL COMPOSITION OF STAINLESS STEEL PT Scheme Code: PTM/CHEM/02/16-17 PT Parameters: C, Si, S, P, Cr, Ni, Mo Method: ASTM E 1086:2014/Any Validated Instrumental
Method Participation Fees: INR 12,000/- + S.T. @ 14.5%
CHEMICAL COMPOSITION OF TOOL STEEL PT Scheme Code: PTM/CHEM/03/16-17 PT Parameters: C, Si, Mn, S, P, Cr, Ni, Mo, V Method: OES/Any Validated Instrumental Method
Participation Fees: INR 12,000/- + S.T. @ 14.5%
CHEMICAL COMPOSITION OF ALUMINUM ALLOY PT Scheme Code: PTM/CHEM/04/16-17 PT Parameters: Mn, Si, Fe, Cu, Sn, Mg, Ni, Zn, Method: ASTM E 1251:2011 / Any Validated Instrumental
Method
Participation Fees: INR 12,000/- + S.T. @ 14.5%
Page 11 of 17
CIN:- U74140DL2010PTC201479
“PT Parameters can be excluded or included on the basis of Participant’s
or Stakeholders’ requirement at commencement of the PT Program”
CHEMICAL COMPOSITION OF BRASS ALLOY PT Scheme Code: PTM/CHEM/05/16-17 PT Parameters: Cu, Fe, Pb, Mn, Ni, Al, Zn, Method: BS EN 15079-2015 / Any Validated Instrumental
Method
Participation Fees: INR 12,000/- + S.T. @ 14.5%
CHEMICAL COMPOSITION OF BRONZE ALLOY PT Scheme Code: PTM/CHEM/06/16-17 PT Parameters: Sn, Pb, Fe, As, Ni, Mn, Zn, Si, P, S, Method: BS EN 15079-2015 / Any Validated Instrumental
Method
Participation Fees: INR 12,000/- + S.T. @ 14.5%
CHEMICAL COMPOSITION OF LIME STONE PT Scheme Code: PTO/CHEM/07/16-17 PT Parameters: SiO2, Al2O3, Fe2O3, CaO, MgO, Chlorides Method: IS 1760 (P-2, 3 & 5);
Participation Fees: INR 12,000/- + S.T. @ 14.5%
Page 12 of 17
CIN:- U74140DL2010PTC201479
“PT Parameters can be excluded or included on the basis of Participant’s
or Stakeholders’ requirement at commencement of the PT Program”
CHEMICAL COMPOSITION OF CEMENT PT Scheme Code: PTB/CHEM/08/16-17 PT Parameters: LOI, SiO2, Al2O3, Fe2O3, CaO, MgO,
Chlorides Method: IS:4032-1985 (RA-2009)
Participation Fees: INR 12,000/- + S.T. @ 14.5%
PROFICIENCY TESTING ON TEXTILE TESTING PT Scheme Code: PTT/CHEM/09/16-17 Chemical PT Parameters: Colorfastness to Laundering, Colorfastness to Rubbing; Colorfastness to Perspiration, Colorfastness to Light, Blend Composition Method: ISO 105 C10-C3, ISO 105X12/IS 766, ISO 105 E 04/IS 971, ISO 105 B
02/IS 245, ISO 1833/IS 3416;
Participation Fees: INR 7,500/- + S.T. @ 14.5%
CHEMICAL PARAMETERS OF MILK POWDER PT Scheme Code: PTF/CHEM/10/16-17 PT Parameters: Moisture, Total Solids, Fat, Total Ash,
Titrable Acidity, Insolubility Index Methods: IS 11623:2008; IS 11721:2013; IS 1165 :2002; IS
12759: 1989 Participation Fees: INR 10,000/- + S.T. @ 14.5%
PROFICIENCY TESTING ON COAL TESTING PT Scheme Code: PTC/ CHEM /11/16-17 PT Parameters: Moisture Content, Volatile Matter,
Ash Content, Calorific Value Method: IS 1350 (P-1):1984 (RA 2007), IS 1350 (P-
2):1975 (RA 2010)
Participation Fees: INR 10,000/- + S.T. @ 14.5%
Page 13 of 17
CIN:- U74140DL2010PTC201479
“PT Parameters can be excluded or included on the basis of Participant’s
or Stakeholders’ requirement at commencement of the PT Program”
PROFICIENCY TESTING ON COAL TESTING PT Scheme Code: PTC/CHEM/12/16-17 PT Parameters: Ash Content , Moisture, Carbon,
Hydrogen, Nitrogen, Sulphur, & Oxygen
Method: IS 1350 (P-1):1984 (RA 2007), IS 1350 (P-3) 1969 & IS 1350 (P-4):(Sec. 1 & 2 );
Participation Fees: INR 10,000/- + S.T. @ 14.5%
PROFICIENCY TESTING ON LEATHER PT Scheme Code: PTT/CHEM/13/16-17 PT Parameters: Total Ash, Solvent Extractable
Substance, pH of Water Solubles, Chromic Oxide;
Method: IS 582 (LC- 3, 4, 10 & 18) 1970
Participation Fees: INR 10,000/- + S.T. @ 14.5%
ANALYTICAL QUALITY CONTROL (AQC/WATER)-I PT Scheme Code: PTW/CHEM/14/16-17 PT Parameters: pH, Potassium, Ammonical Nitrogen, Total
Kjeldhal Nitrogen, Sodium, Phosphate, Biological oxygen demand (BOD, 27ºC for 3 Days), Chemical Oxygen Demand (COD), Volatile Solids, Total Dissloved Solids;
Methods: IS:3025 (P-11,45,34,31,44,58,18 &16) / APHA 22nd EDD: 2012
Participation Fees: INR 15,000/- + S.T. @ 14.5%
Page 14 of 17
CIN:- U74140DL2010PTC201479
“PT Parameters can be excluded or included on the basis of Participant’s
or Stakeholders’ requirement at commencement of the PT Program”
ANALYTICAL QUALITY CONTROL (AQC/WATER)-II PT Scheme Code: PTW/CHEM/15/16-17 PT Parameters: pH, Conductivity, Total Hardness, Chloride,
Fluoride, Sulphate, Nitrate, Calcium, Magnesium, Hexavalent Chromium & Total Suspended Solids
Methods: IS:3025 (P-11,14,21,32,60,24,34,40,46,52 &15) / APHA 22nd EDD: 2012
Participation Fees: INR 15,000/- + S.T. @ 14.5%
HEAVY METALS IN WATER PT Scheme Code: PTW/CHEM/16/16-17 PT Parameters: Cu, Mn, Cd, Ni, Cr, Pb, Zn, B, Al, Na, K,
Ag, Ba, Fe; Method: AAS/ICP Participation Fees: INR 15,000/- + S.T. @ 14.5%
CHEMICAL COMPOSITION OF IRON ORE PT Scheme Code: PTO/CHEM/17/16-17 PT Parameters: Fe, Al2O3, CaO, MgO, TiO2, SiO2 Method: IS 1493 (P-1, 3 & 4)
Participation Fees: INR 12,000/- + S.T. @ 14.5%
CHEMICAL COMPOSITION OF CAST IRON PT Scheme Code: PTM/CHEM/18/16-17 PT Parameters: C, Si, Mn, P, S, Ni, Mo, Cr, Cu Method: ASTM E-1999-2011
Participation Fees: INR 12,000/- + S.T. @ 14.5%
Page 15 of 17
CIN:- U74140DL2010PTC201479
“PT Parameters can be excluded or included on the basis of Participant’s
or Stakeholders’ requirement at commencement of the PT Program”
Upcoming PT Programs in the Field
of MECHANICAL TESTING
TENSILE PROPERTIES OF STEEL PT Scheme Code: PTM/MECH/01/16-17 PT Parameters: Tensile Strength, Yield Strength,
Elongation Method: IS 1608:2005/ ISO 6892:1998 Participation Fees: INR 15,000/- + S.T. @ 14.5%
BURSTING STRENGTH OF ALUMINIUM FOIL PT Scheme Code: PTT/MECH/02/16-17 PT Parameters: Bursting Strength Method: IS 1060 (P-1):1966 (RA 2009)
Participation Fees: INR 10,000/- + S.T. @ 14.5%
MECHANICAL PROPERTIES OF TOR STEEL PT Scheme Code: PTM/MECH/03/16-17 PT Parameters: Tensile Strength, Yield Strength,
Elongation, Mass per Meter Run Method: IS1786:2008/IS 1608:2005 Participation Fees: INR 15,000/- + S.T. @ 14.5%
Page 16 of 17
CIN:- U74140DL2010PTC201479
“PT Parameters can be excluded or included on the basis of Participant’s
or Stakeholders’ requirement at commencement of the PT Program”
BRINNELL HARDNESS OF STEEL PT Scheme Code: PTM/MECH/04/16-17 PT Parameters: Brinnell Hardness (HBW) Method: IS 1500 (P-1):2013
Participation Fees: INR 12,000/- + S.T. @ 14.5%
ROCKWELL HARDNESS NUMBER (HRC) OF STEEL PT Scheme Code: PTM/MECH/05/16-17 PT Parameters: Rockwell Hardness Number (HRC) Method: IS 1586 (P-1):2012
Participation Fees: INR 12,000/- + S.T. @ 14.5%
ROCKWELL HARDNESS NUMBER (HRB) OF STEEL PT Scheme Code: PTM/MECH/06/16-17 PT Parameters: Rockwell Hardness Number (HRB) Method: IS 1586 (P-1):2012
Participation Fees: INR 12,000/- + S.T. @ 14.5%
VICKERS HARDNESS OF STEEL (HV-30) PT Scheme Code: PTM/MECH/07/16-17 PT Parameters: Vickers Hardness Number (HV - 30) Method: IS 1500 (P-1):2013
Participation Fees: INR 12,000/- + S.T. @ 14.5%
Page 17 of 17
CIN:- U74140DL2010PTC201479
“PT Parameters can be excluded or included on the basis of Participant’s
or Stakeholders’ requirement at commencement of the PT Program”
VICKERS HARDNESS OF STEEL (HV-5) PT Scheme Code: PTM/MECH/08/16-17 PT Parameters: Vickers Hardness Number (HV - 5) Method: IS 1500 (P-1):2013
Participation Fees: INR 12,000/- + S.T. @ 14.5%
IMPACT TESTING OF STEEL SAMPLES as per ASTM A370-14 & ASTM E23-12c
PT Scheme Code: PTM/MECH/09/16-17 PT Parameters: Charpy Impact Testing (V Notch) Method: ASTM A370 -14 & ASTM E23-12c Participation Fees: INR 25,000/- + S.T. @ 14.5%
PROFICIENCY TESTING ON TEXTILE TESTING PT Scheme Code: PTT/MECH/10/16-17 PT Parameters: GSM (Weight per unit area), Width, Tensile
Strength, Tear Strength, Linear Density of Yarn (Removed Fabric)
Method: ASTM D 3776/D3776M or ISO 3801 or IS 1964; ASTM D 3774/ISO 22198/IS 1954; ISO 13934-1/IS 1969; ASTM D1424/ISO 13937-1/IS 6489; ISO 7211-5/IS 3442
Participation Fees: INR 7,500/- + S.T. @ 14.5%
PROFICIENCY TESTING ON POLYMER PT Scheme Code: PTPO/MECH/11/16-17 PT Parameters: Density, MFI, Vicat Softening
Temperature Method: IS 13360/ASTM D 792, ASTM D 1238, IS 6307/IS
12235/ASTM D 1525
Participation Fees: INR 15,000/- + S.T. @ 14.5%