UX Series

Confidential

Chapter 1. Disassembly & Assembly Guide1.MS-1-D.1

1-3. Disassembly & Assembly

- Main Section -

MS-1 Main Section Disassembly Except 1seg Tuner / Wireless WAN Model [MA]2

UX Series

Confidential

Battery Pack1) 2)

1.MS-1-D.2

In the state of 1), remove the Battery Pack in the direction of the arrow.Turn over the main unit, and slide the lever in the direction ofthe arrow to release the lock.

Lever

Battery Pack Battery Pack

UX Series

Confidential

Cap (Stick Pointer)1)

1.MS-1-D.3

Remove the Cap.

Remark

Shape of the Cap* There are two kinds of Cap for J Model.When replacing the Cap, be sure to use the Cap of the same shape and color as one used in the repair set.

Cap(Stick Pointer)

[MA]3

C Model

J Model [MA]3

Cap (Stick Pointer)

UX Series

Confidential

Dummy Card, Stylus1)

1.MS-1-D.3(a)

Remove the Dummy Card. Turn over the main unit and remove the Stylus.

Dummy Card

Stylus

[MA]3

2)

UX Series

Confidential

Housing (Bottom)1) 2)

1.MS-1-D.4

While disengaging the detent (two places), remove the Cover. Remove the six screws.

Remove the Housing.

3)

Screw: Blue-B6 / Green-B7 / Red-B8Cover (Bottom Screw)

Housing (Bottom)

UX Series

Confidential

Parts of the Housing (Bottom)1)

1.MS-1-D.5

Remove the two screws.

Screw: B12)

While disengaging the detent (three places), remove the Cover.

Cover (Bottom)

3) [ADD]1Screw: B1

Remove the one screw.

UX Series

Confidential

Attachment1.MS-1-D.6

Peel off the Sheet.*HDD Model - Two placesFlash Memory Model - One place

HDD Model

Sheet(Bottom)

1)

2)

Peel off the Tape.*HDD Model - Tape (one place), Kapton Tape(One place)Flash Memory Model -Tape (Two places)

HDD Model Flash Memory Model

Tape(Harness)Tape(Harness)Tape(Harness)

[ADD]4

Flash Memory Model

[ADD]4

Kapton Tape

UX Series

Confidential

Wireless LAN Card1)

1.MS-1-D.7

Screw: B4

Remove the one screw and then the Wireless LAN Card.

Wireless LAN Card

2)

Disconnect the Antenna (one place) and the terminal of the Coaxial Cable (two places) vertically.

Coaxial Cable [COR]2

Antenna(2.4/5GHz For Right)

UX Series

Confidential

HDD1)

1.MS-1-D.8

2)

Remove the five screws and the Bracket.

HDD

1. Raise the lock lever and release the lock.

2. While disconnecting the FPC, remove the HDD.

Lock Lever

FPC

Screw: B1

Bracket (HDD)

HDD Model

[MA]3

UX Series

Confidential

Parts of the HDD1)

1.MS-1-D.9

HDD

Cushion (HDD)

Remove the Cushion (two places).

HDD Model

[MA]3

UX Series

Confidential

SSD1)

1.MS-1-D.9(a)

2)

Remove the five screws.

1. Raise the lock lever to release the lock.

2. While removing the FPC, remove the SSD.

Lock Lever

Screw:B1

FPC

SSD

Flash Memory Model [MA]3

UX Series

Confidential

Parts of the SSD1)

1.MS-1-D.9(b)

Remove the two screws.

Screw:B2

Bracket(MT R)

Bracket(MT F)

SSD

Remove the SSD.

2)

Flash Memory Model [MA]3

UX Series

Confidential

Lithium Battery, Bracket (MS), Cover (WLB)1)

1.MS-1-D.10

3)

2)

Raise the lock lever to release the lock and remove the Keyboard ASSY.

Keyboard ASSY

Lock Lever

Disengage the detent (six places) and remove the Cover.

Cover (WLB)4)

Bracket (MS)

Keyboard ASSY

Sheet (Fan MS)

Disconnect the connector and remove the Lithium Battery.

* The Lithium Battery is secured with adhesive tape.

Connector

Lithium BatteryAdhesive Tape

1. Turn over the Keyboard ASSY and the Sheet (one place).

2. Disengage the detent (two places) and remove the Bracket.

UX Series

Confidential

Mother Board1)

1.MS-1-D.11

2)

Microphone

Remove the Microphone.

Mother Board

While releasing the connectors and disconnecting the FPC, remove the Mother Board.

*1: The FPC is connected to the Mother Board.

Connector

FPC *1

UX Series

Confidential

Palmrest, LCD Section1)

1.MS-1-D.12

3)

2)

4)

Cover (Screw Palmrest) Screw: B1

Peel off the Cover (two places). Remove the two screws.

Screw: B14

Remove the two screws and the Bracket.

Palmrest

LCD

While disengaging the detent (four places), remove the Palmrest.

Bracket (SWX R)

UX Series

Confidential

Update History

2006.06.08 [ADD] Procedure (Page 5) 1.101

Date Contents Version No.

[ADD]---Addition [DEL]---Deletion [CHG]---Change [COR]---Correction [MA]---Model Addition

2006.06.27 [MA] (Page 1)[COR] Description (Page 7) 1.202

2006.07.05 [MA] (Page 3, 3(a), 6, 8, 9, 9(a), 9(b)) 1.303

2006.09.04 [ADD] Procedure (Page 6) 1.404