CG HT Motors Catalogue

Machines Large Rotating

C O N T E N T S

Introduction

Energy Efficient Motors - Series NG

Totally Enclosed Air Cooled - TP Series

Totally Enclosed Tube Ventilated Motor - TV Series

FLAMEPROOFMotors for Hazardous Area

Re - rolling Mill Duty Motor - KMR Series

Totally Enclosed Water Cooled - UW Series

Screen Protected Drip Proof Motor - UD Series

Standards / Applications

Slip Ring Induction Motors

CG Electric Systems Hungary Zrt.

Reference List

11

22

33

66

99

77

44

55

1111

88

1010

1212

G

Introduction

n t r o d u c t i o n ii

CG expands its global foot print with manufacturing facilities across 7 countries

Establishment of Central Research & Development Centre

Company Established Manufacturing Facility for Large Rotating Machines at Mumbai

R. E. B. Crompton Founded R. E. B. Crompton & Co.

Crompton Parkinson Ltd. Was Established

The company (CPL) was taken over by Lala Karamchand Thapar

Change of name to CGL (Crompton Greaves Ltd.)

Transfer of Manufacturing Facility of High Voltage Machines from Mumbai to Mandideep Works (M7 Division)

Crompton Greaves Ltd., a member of the Avantha Group, is India’s largest private sector enterprise in the business of electrical engineering. The company is pioneer in the field for more than 83 years and has vast experience and expertise in the management and application of electric energy.

Crompton Greaves enjoys leadership position in most of its product lines with strong manufacturing base located all over India and abroad, a wide distribution network, commitment to quality and constant improvement in processes and products, technology up-gradation through a well established in-house R&D facility, joint ventures with foreign collaborators backed by a workforce of dedicated managers, engineers and technicians.

Cement Industry

Sugar

Nuclear Power

Steel

Transportation

Mining

Metal Industry

p p l i c a t i o n saa

Wind Mill Generator

Cat

. No.

CG

/ M

7 /

Sep

09H

T /

Introduction

Global Series Energy Efficient MotorsCrompton Greaves G-Series (Global Series) Motors belong to family of energy efficient, Totally enclosed fan cooled (TEFC) state-of-art, squirrel cage motors. These motors are extremely efficient, even at partial load, and they have very low noise level. Efficiency is maximized by effectively utilizing materials, minimizing losses and optimized fin design. Further more ,due to reduced fan and core losses, there is no sharp drop in the efficiency curve at partial load.

The components are designed using finite element analysis of electromagnetic, structural, thermal and air flow, which ensures better stress distribution and high structural rigidity. Adequate steps have been taken in the electrical design process to make sure the natural frequencies of stator teeth and core remain well away from the field forcing frequency. Appropriate selection of tolerances and fits in addition to good manufacturing processes facilitates maintaining high level of quality. The rotor and fans are separately balanced on precision balancing machine to very stringent grades. All these put together, results in extremely low vibration levels.

For optimum performance and maximum life NG-Series motors are built with axial ventilation rotor design with machined stator core that improves heat transfer thereby giving excellent thermal performance. This is further aided by streamlined internal air circuit design & vacuum pressure impregnation (VPI) insulation scheme which meets the requirement of Thermal class F (temperature limit 155°c) though the motors are rated for class B temperature rise operation.

CGL’s Motor Solutions

CG deliver variants of the NG-Series motor (with 13.2kV 60Hz. higher poles/low speed). Special

mounting arrangement can also be built as per customer requirement. CG also supply

configurations of G-Series motors with sleeve bearings, double shaft

extension, low vibration, low noise levels , motors for hazardous areas.

Additional sensors (vibration sensors, speed sensor, contact thermometer) can

be provided to compliment motor monitoring and fault protection units.

The efficiency curve of standard motor is droping in nature i.e. there is a sharp fall in efficiency at part loads. But NG-series motors have an almost flat efficiency curve. Hence fall in efficiency is marginal. Thus energy saving is significant even at part loads.

The motors are totally enclosed (IP55) surface cooled through a fan mounted on the shaft (IC4A1A1) or separately mounted (IC4A1A6) along with the following features

Axial ventilation rotor designMachined stator Single circuit ventilation Vacuum pressure impregnation(VPI) insulation system

NG-Series Output Chart, 3300-6600 V, 50Hz

3000

2500

2000

1500

1000

500

0Poles 4 6 8RPM1500 1000 7503000

2

kW

NG-Series Foot Mounted, 400M Frame Motor

NG-Series Foot and Flange Mounted, 315M Frame Motor

% Lo

ad

25 50 75 100 125 150

% E

fficien

cy

NG-Series Standard Motor

98

96

94

92

90

88

350 kW, 4 Pole , 355 Frame Motor Efficiency Pattern

Value For Money

NG-Series

Salient Features

Energy efficient surface cooled motorsRobust steel frameSolid deep rotor bars in single cageSpecial double cage as per driven equipment requirementAntifriction bearingsDynamically balanced rotorsStringent quality checksClass 'F' insulation with class 'B' temperature riseHigh efficiency Low noise levelsLow vibration levelsEase of maintenance

Type

Poles A B C ØD E H HC L

NG 315 S

NG 315 M

NG 315 L

NG 355 S

NG 355 M

NG 355 L

NG 400 S

NG 400 M

NG 400 L

NG 450 S

NG 450 M

NG 450 L

2 - 62 - 62 - 62 - 62 - 62 - 62 - 82 - 82 - 82 - 82 - 82 - 8

70 - 9570 - 9570 - 9585 - 11085 - 11085 -11085 - 12085 - 12085 - 12085 - 12585 - 12585 - 125

140 - 170140 - 170140 - 170170 - 210170 - 210170 - 210170 - 210170 - 210170 - 210170 - 210170 - 210170 - 210

315315315355355355400400400450450450

790790790900900900

100010001000110011001100

170018001900184519452065198020802220215023252525

508508508610610610686686686750750750

800900

1000900

10001120900

10001120100011201250

216216216250250250280280280315315315

General Arrangement Drawing

All dimensions are in mm

† GD500, GD560 are also available on request

Note : Due to continuous improvements and developments, the above data is likely to be changed without prior notice.

Totally enclosed fan cooled (TEFC)100 to 3000kW at 50 Hz150 to 4000HP at 60 HzVoltages from 380 V to 13200 VShaft heights 315 - 630mm 12.4 - 22.0 inchesHorizontal or vertical IP55/IP56, IC4A1A1 / IC4A1A62 Pole to 12 PoleStandards IEC60034 / IS325Motors for hazardous areas Motors for VFD application

Standard Range

Overall Dimensions of Motor

Cat

. No.

CG

/ M

7 /

Sep

09H

T /

NG-Series

A

HHC

D

E C B

L

The TPC range of induction motors comes under the offerings in squirrel cage rotor (SCR) design. These motors belong to TP range general purpose motors having totally enclosed construction. TPC range consist of foot mounted IMB3 IS 2253 / IEC 60034-7 totally enclosed IP55 IS4691 / IEC 60034-5 cooled with air to air IEC 60034-6 heat exchangers. VTPC range is a variant of the TPC range modular design with IMV1 flange mounted construction. CGL also offers robust design when used with variable voltage variable frequency drives, the BTPC range have blower mounted heat exchanger for most stringent applications and high output low speed designs.

The TP range of motors has been designed to meet varying application demands while maintaining the performance and high level of quality. TP range meets requirement of various Industrial Sectors namely power, irrigation, oil & gas, cement, sugar, textile, steel, mining, chemical Industries.

Low Vibration, Less Noise........More PeaceCG TP series motors has been engineered using the latest technologies to achieve effective utilization of material for optimal performance. The heat exchangers have been thoroughly analyzed using advanced computational fluid dynamics ensuring better heat transfer for higher power output.The fan duct covers are internally lined with noise absorbing material to achieve lowest noise levels. TP range comply to IEC 60034-9 for noise and IEC 60034-14 for vibration standards.

Rotors are generally designed as rigid however flexible rotors are also offered depending on the applications. Rotor reliability is ensured by the use of latest design tools. Fabricated mild steel body structure ensures low vibration characteristics for longer life and maintenance free operations. TP range of CACA motors lends itself to highly versatile modular concept. Its heat exchangers can be easily switched over from Closed Air Circuit Air Cooled (CACA ) to Closed Air Circuit water Cooled (CACW) enclosure to enhance the output of motor.

Heat exchangers for the BTPC range are built with IC6A1A6 or IC6A6A6 primary and secondary air circuits have either shaft mounted fans or separately mounted blowers.

Motor of Choice

Crompton Greaves CACA range of motors are designed to deliver and perform in most demanding & strenuous operations. CG engineers use the latest technologies that help to build the motors with high commitment to performance, reliability and quality.


CG deliver variants of the TP-Series motor (with 13.8kV 60Hz. higher poles/low speed). Special mounting arrangement can also be built as per customer requirement. CG also supply configurations of TP-Series motors with sleeve bearings, double shaft extension, low vibration, low noise levels & motors for hazardous areas. Additional sensors (vibration sensors, speed sensor, contact thermometer) can be provided to compliment motor monitoring and fault protection units.

12 Poles RPM

2 4 6 8 105003000 1500 1000 750 600

80007000600050004000300020001000

0

kWIC6A1A6 Cooling Type, Oil Lubricated 630G Frame CACA Motor

High Voltage Closed Air Circuit Air Cooled (CACA) TP Series Induction motors

TP Series Output Chart, 3300-6600 V, 50Hz

TP -Series

I6A1A1 Cooling Type, TPC 500 Frame with Silencer

Poles A B C ØD E H HC LType

14501800

1775 - 21301775 - 19501900 - 21501900 - 21502250 - 25002250 - 25002300 - 26002300 - 26002300 - 26002400 - 26002400 - 2600

2050 - 22502300 - 24252375 - 25502375 - 25502650 - 32503050 - 36502700 - 32752900 - 34752400 - 27752600 - 29752800 - 31752925 - 36503125 - 3800

610686750750850850950950

10601060106011801180

1000125012501400140018001400160014001600180016001800

315315315

315 - 570335 - 570335 - 570355 - 570355 - 570375 - 570375 - 570375 - 570375 - 630375 - 630

85 - 10085 - 11085 - 12585 - 125110 - 140110 - 140125 - 160125 - 160140 - 160140 - 180140 - 180160 - 180160 - 200

170 - 210170 - 210170 - 210170 - 210210 - 250210 - 250210 - 250210 - 250250 - 300250 - 300250 - 300250 - 300300 - 350

355400450450500500560560630630630710710

2 - 62 - 6

2 - 102 - 102 - 102 - 102 - 122 - 122 - 122 - 122 - 122 - 122 - 12

TPC 355 D

TPC 400 E

TPC 450 E

TPC 450 F

TPC 500 F

TPC 500 H

TPC 560 F

TPC 560 G

TPC 630 F

TPC 630 G

TPC 630 H

TPC 710 G

TPC 710 H


Poles D E ØM ØN P H AB ACType

VTPC 740 C

VTPC 740 D

VTPC 940 D

VTPC 940 E

VTPC 1080 D

VTPC 1080 E

VTPC 1080 F

VTPC 1220 D

VTPC 1220 E

VTPC 1220 F

VTPC 1700 E

VTPC 1700 F

VTPC 1700 G

1500*1500*2050*2050*2350*2350*2350*2550^2550^2550^3150^3150^3150^

925925

10001000100010001000112511251125127512751275

925925

10001000100010001000112511251125127512751275

100100125125125125125

125 - 140125 - 160140 - 160180 - 200180 - 200

200

210210210210210210210

210 - 250210 - 250210 - 250

300300300

740740940940

108010801080122012201220170017001700

680680880880

100010001000112011201120160016001600

800800

10001000115011501150132013201320180018001800

2200240025502750255027502950275029503150352537253925

AD

* Refer figure -1

4 - 64 - 6

4 - 104 - 104 - 104 - 104 - 104 - 124 - 124 - 124 - 124 - 124 - 12

Technical Specification

Shaft Height IMB3 : 355 - 900 mm

Type of Mounting : IMB3,IMV1

Frame Construction : Fabricated Steel

Insulation : Class H,F with VPI

Enclosures : Totally Enclosed Air Cooled

Frame Size IMV1 : 740 to 2000

Cooling : IC6A1A1/ IC6A1A6 / IC6A6A6

Rotor Construction : Squirrel Cage

Standards : IEC 60034 / IS:325

Degree of Protection : IP55 as per IS:4691



Gen

eral

Arr

ang

emen

t D

raw

ing

Figure -1

H

E

ØNP

AB

ADAC

ØM

Figure -2

Gen

eral

Arr

ang

emen

t D

raw

ing

Figure -2

ØNP

ADAC

ØM

AB

E

D

H



† VTPC2000 is also available on request

† TPC800 and TPC900 are also available on request


^Refer figure -2

E C BL A

HHHC

ØD

TP -Series

Cat

. No.

CG

/ M

7 /

Sep

09H

T /

High Voltage Closed Air Circuit Water Cooled (CACW) UW Series Induction motors

The UWC range of induction motors comes under the offerings in squirrel cage rotor (SCR) design. These motors belong to UW range general purpose motors having totally enclosed construction. The UWC range consist of foot mounted IMB3 15: 2253 / IEC 60034-7 totally enclosed self cooled IP55 IS4691 / IEC 60034-5 cooled with air to water IC 8AIW7- IEC 60034-6 heat exchangers.

VUWC range is a variant of the UW range modular design with IMV1 flange mounted construction.

The UWR range of induction motors are slip ring design offerings

The UW range of motors has been designed to meet varying application demands while maintaining the performance and high level of quality. TP range meets requirement of various Industrial Sectors namely oil & gas, cement, sugar, textile, steel, mining, chemical Industries.

Work Horse for the Industry

CG UW Series packs high power densities i.e these motors are characterized by high power to weight ratio. These motors have fabricated steel stator frame unit with twin circuit internal air paths.

Ensuring a very low vibration level enhances the life of motor, this is achieved through a sturdy construction and careful three stage balancing of rotor to very high accuracy as per ISO 1940 Shafts are subjected to stringent stage wise quality checks after fabrication & machining UW range comply to IEC 60034-9 and IEC 60034-14 noise and vibration standards.

Rotors are generally designed as rigid however flexible rotors are also offered depending on the application. Rotors reliability is ensured by the use of latest design tools. Fabricated mild steel body structure ensures low vibration characteristics for longer life and maintenance free operations. UW range of motors lends itself to highly versatile modular concept.

Motors that you can depend on

CG CACW range of motors are designed to deliver and perform in most demanding & strenuous operations. CG engineers use the latest technologies that help build motors with high commitment to performance, reliability and quality.

CG’s Motor Solutions

CG deliver variants of the UW-Series motor (with 11kV 60Hz. higher poles/low speed). Special mounting arrangements can also be built as per customer requirement. CG also supply configurations of UW-Series motors with sleeve bearings, double shaft extension, low vibration, low noise levels , motors for hazardous areas. Additional sensors (Water leakage detector, water flow detector, vibration sensors, speed sensor, contact thermometer) can be provided to compliment motor monitoring and fault protection units.

VUWC-Series, 500M Frame Motor

10000

8000

6000

4000

2000

012 Poles

RPM10

500750 6002 4 6 8

3000 1500 1000

kW

UW Series Output Chart, 3300-6600 V, 50Hz

UW-Series


Shaft Height IMB3 355 - 710 mm

Type of Mounting IMB3,IMV1

Frame Construction Fabricated Steel

SR (Slip Ring Motor )

Standards IEC 60034 / IS: 325

Degree of Protection IP55 as per IS: 4691

Frame Size IMV1 740/940/1080/1220/1700

Cooling IC8A1W7

Rotor Construction SCR (Squirrel Cage Rotor)

Insulation Class H,F with VPI

Enclosures CACW (IC8A1W7)



Type Poles A B C ØD E H HA

750850950950

1060106011801180

12501250125016001400180014001800

315315 - 570335 - 570335 - 570355 - 570355 - 570375 - 630375 - 630

2 - 102 - 102 - 102 - 102 - 102 - 102 - 102 - 10

L

85 - 12585 - 140

100 - 140125 - 140125 - 160140 - 160160 - 180160 - 200

170 - 210170 - 250170 - 250210 - 250210 - 250210 - 250250 - 300300 - 350

450500560560630630710710

18602100230023002325232524752475

20002050 - 24502075 - 25152475 - 29152350 - 27152750 - 31152450 - 28502850 - 3250

UWC 450 E

UWC 500 E

UWC 560 E

UWC 560 G

UWC 630 F

UWC 630 H

UWC 710 F

UWC 710 H

Type

VUWC 740 D

VUWC 940 D

VUWC 940 E

VUWC 1080 D

VUWC 1080 E

VUWC 1080 F

VUWC 1220 D

VUWC 1220 E

VUWC 1220 F

VUWC 1700 E

VUWC 1700 F

VUWC 1700 G

VUWC 1700 H


Poles ØD E ØM ØN P H AC AB

100 125 125 125 125 125

125 -140125 -160 140-160

180 - 200 180 - 200 180 - 200

200

210 210 210 210 210 210

210 - 250 210 - 250 210 - 250

300 300

300 - 350 350

740 940 940

1080 1080 1080 1220 1220 1220 1700 1700 1700 1700

680880 880

1000 1000 1000 1120 1120 1120 1600 1600 1600 1600

800 1000 1000 1150 1150 1150 1320 1320 1320 1800 1800 1800 1800

1825 1825 2025 1825 2025 2225 2025 2225 2425 2200 2400 2600 2600

925 1000 1000 1000 1000 1000 1125 1125 1125 1275 1275 1275 1275

925100010001000100010001125112511251275127512751275

1530*1825*1825*1850*1850*1850*2600^2600^2600^3200^3200^3200^3200^

4 - 64 - 6

4 - 104 - 104 - 104 - 104 - 104 - 124 - 124 - 124 - 124 - 124 - 12

AD



† VUWC2000 is also available on request

† UWC800 and UWC900 are also available on request


* Refer figure -1

H

ØNP

E

ADAC

ØM

AB

ØD

Gen

eral

Arr

ang

emen

t D

raw

ing

HØNP

EAD

AC

AB

ØD

ØM

Gen

eral

Arr

ang

emen

t D

raw

ing

Figure -1

Figure -1

^ Refer figure -2

UW-Series

Cat

. No.

CG

/ M

7 /

Sep

09H

T /

ØD

E

C BL

A

HHA

Slip Ring Induction Motors

Introduction

Crompton Greaves gained a position of leadership in design & manufacturing of high voltage slip ring induction motor is secured by an unfailing commitment to engineering excellence & technological innovation. CG has been recognized as an industry leader in dependability & quality.CG motors are custom designed to each customer's specific application. By virtue of design versatility & high operating efficiency, CG motors are logical choice for a multitude of industries including cement, sugar, steel, oil & gas, petrochemical, pulp & paper, water & irrigation.Slip ring motors are used for higher torque during start-up and coincidentally lower current flow. For maintaining the same, SR motors are started with external resistance in the rotor circuit which results in dissipation of losses in the external resistance.

Slip ring motors are ideal for

• Loads with high inertia.• High starting torque• Low starting Current• Speed Variation• Frequent Peak Loads

Special Features

• Optimized electrical design• Vacuum pressure impregnated stator winding• Reliable and rugged heavy-duty construction• Compact design and low weight• Low noise and low vibration• Easy installation and maintenance• Wide range of accessories


CG deliver variants of the SR-Series motor (with 13.8kV 60Hz. higher poles/low speed). Special mounting arrangements can also be built as per customer requi rement . CG a lso supply configurations of SR-Series motors with sleeve bearings, double shaft extension, low vibration, low noise levels , motors for hazardous areas. Additional sensors (Water leakage detector, water flow detector, vibration sensors, speed sensor, contact thermometer) can be provided to compliment motor monitoring and fault protection units.

To suit various applications CG offered motors in different enclosures like

CACA High Voltage Closed Air Circuit Air Cooled TPR & BTPR Series Induction motors CACW High Voltage Closed Air Circuit Water Cooled UWR Series Induction motors TETV High Voltage Totally Enclosed Tube Ventilated TVR Series Induction MotorsSPDP HT/LT Squirrel Cage / Slip Ring Induction Motors in UDR & KMR EnclosureThe motor meet the general technical conditions in IEC 60034-1 & IS: 325 standards.

Slip Ring

Constructional Features

• Robust Steel Frame• Spider type Shaft• Double Ended Radial Ventilation • Solid Deep Rotor Bars in Single Cage• Special Double Cage as per Drive• Endshield Mounted Bearings• Antifriction/Sleeve Bearings• Dynamically Balanced Rotors• Class 'F' Insulation with Class 'B' temperature rise• Ease of Maintenance• Space Heaters, Online greasing for bearing

TPR-Series, 710M Frame Internal Slipring Motor

TPR-Series, 630F Frame Motor

CACA CACWSPDPTETV

IC6A1A1, IC6A1A6, IC6A6A6IC8A1W7IC01A1IC5A1A1

Enclosure

TPR / BTPRUWR UDR / KMR TVR

VTPRVUWRVUDR /VKMRVTVR

Horizontal Vertical Cooling Standards CG Series of Slip Ring Motor



Shaft Height IMB3 : 355 to 900 mm

Frame Construction : Fabricated Steel

Enclosures : CACA, CACW, SPDP, TETV

Rotor Construction : Slipring

Degree of Protection : IP55, IP23 , IP54 as per IEC 60034-5 / IS: 4691

Type of mounting : IMB3, IMV1

Insulation : Class H,F with VPI

Cooling : IC6A1A1/ IC8A1W7/ IC6A1A6/IC5A1A1

Standards : IEC 60034 / IS: 325

General Arrangement Drawing TPR Series

ØD

A

HHC

LBCE


Poles A B C D E H HC LFrame

TPR400 E

TPR450 E

TPR450 F

TPR500 F

TPR500 H

TPR560 F

TPR560 G

TPR630 F

TPR630 G

TPR630 H

TPR710 G

TPR710 H

4 - 84 - 104 - 104 - 104 - 104 - 104 - 104 - 104 - 104 - 104 - 104 - 10

125012501400140018001400160014001600180016001800

315315315335335355355375375375375375

110125125140140160160160180180180200

210210210250250250250300300300300350

400450450500500560560630630630710710

180017751775190019002250225023002300230024002400

310031253325342538253425362534753675387538754075

686750750850850950950

10601060106011801180


General Arrangement drawing for rest of series, please contact us

Cement Plant : Mills, Crusher, Fans, Conveyor, Pump, Compressor, Roller PressMetal & Steel Sector : Crushers, Blower, Fan, MixtureSugar Industries : Fibrizor , Cutter, Compressor, Pump, LevellerPaper Mill : Refiner, Chipper, Pump, Compressor

Wide range to cover our Customers in many Industries

Standard Features• Winding Temperature Detectors (Resistance / Thermistor type) • Phase Segregated Terminal Box (Fault withstanding type) for High Voltage • Bearing Temperature Indicators (Analog / Digital)• Bearing Temperature Detectors (BTD) • Space Heater, Earthing pads

Customized Features• External Neutral Phase Segregated Terminal Box (Star Point)• Current transformer (CT) terminal box for differential protection• Air temperature Indicators (Analog / Digital)• Provision for Mounting of Vibration Probes

Variants of rotor terminal box • Double shaft extension • External / internal Slip ring

Fabricated Slipring Unit

Slip Ring

Cat

. No.

CG

/ M

7 /

Sep

09H

T /

kW : 100 - 10000

Voltage : 380 - 13800Pole : 4 - 20

IntroductionCG Screen Protected Drip Proof Motors are specially designed to provide continuous trouble free service. These motors are suitable for all industrial drives, mill, pumps, etc. In SPDP motor external air is sucked inside through a wire mesh screen by means of a shaft mounted fan. The air traverses the length of the motor and is expelled at the opposite end through the wire mesh screen. Crompton Greaves UDR, UDC and VUDC series motors are continuously rated for S1 duty as per IS: 325 / IEC 60034-7 They are suitable for 3 phase supply, 50Hz freq. The motor enclosure is offered with Degree of protection IP 23, providing adequate protection against dripping liquids and solid objects as per IS: 4691/ IEC 60034-5 & the mounting dimensions are as per IS: 1231/ IEC 60072.

StatorTo minimize the iron losses, stator stack is made up of low-loss silicon stampings. The stator winding consists of insulated coils of high conductivity, fiber glass covered strips. Completely taped & insulated coils are housed in the stator slots followed by insertion of tight slot wedges & termination of the end connections.

RotorThe rotor bars are made of Copper for carrying higher current to ensure minimum deflection and stress concentrations, specially incorporated strappings to make the overhang rigid to encounter stresses on account of starting and switching for various critical applications, rotor shafts are used of high grade steel (like EN8 or other suitable grade) with Ultrasonic test. Balancing

End-Shields The end shields support the rotor on bearings & protect the winding, with other internal parts of the machine. These are either of fabricated Mild steel or of cast iron.

Ensuring a very low vibration level enhances the life of rotor, this is achieved through a sturdy construction and careful three stage balancing of rotor to very high accuracy as per ISO 1940 shafts are subjected to stringent stage wise quality checks after fabrication & machining. UD range comply to IEC 60034-9 for noise and IEC 60034-14 for vibration standards.

HT/LT Squirrel Cage / Slip Ring Induction Motors in SPDP Enclosure

BearingsCarefully selected anti-friction bearing are used. These bearing are regreased and located in bearing housing of adequate size. The grease used is lithium based grade 3. All the motors irrespective of frame size have the bearing housing insulated to prevent the flow of shaft current as a standard practice. (Insulated bearing can also be provided for special requirements)

Terminal Box For good mechanical strength and for good current carrying capacity the terminal studs are made from extruded brass rods, rigid welded construction with ample size for making connections of supply cables along with pressure relief disk in the box in case of an arching short circuit, Cable entry position can be changed in steps of 90 degree about the axis of terminal box. The terminal box has been certified to withstand fault level of 43kA for 0.25 secs.

Accessories• Winding Temp. Detectors (RTD) for HT, PTC thermistor for LT.• Bearing Temp. Detectors (BTD)• Temp. Indicators Dial type thermometer (DTT)• Mounting of Vibration Probes• Phase Segregated Terminal Box (Fault withstanding type) for HT, • Star Point Terminal Box

Dial type thermometers (DTT) are used to monitor bearing temperature under all conditions and commonly, mercury in steel type DTT is used (Non mercury

Space heater are used to avoid any condensation of moisture inside the motor when in idle condition. Suitably located lifting hooks of adequate strength are provided to lift the motor for the purpose of installation, alignment, repairs and overhauling. Earthing terminals are provided at opposite side on stator body & also on each terminal box. Suitable sized slip ring with large creepage distances are mounted externally to the main enclosure on the non-drive end, for ease of maintenance, inspection windows are also provided for monitoring the condition of the slip ring and brushes.

can also be provided for special requirements).


CG deliver variants of the UD-Series motor (with 11kV 60Hz. higher poles/low speed). Special mounting arrangement can also be built as per customer requirement. CG also supply configurations of UD-Series motors with sleeve bearings, double shaft extension, low vibration, low noise levels , motors for hazardous areas. Additional sensors (vibration sensors, speed sensor, contact thermometer) can be provided to compliment motor monitoring and fault protection units.

10000

8000

6000

4000

2000

0

12 Poles RPM

2 4 6 8 105003000 1500 1000 750 600

kW

UD Series Output Chart, 3300-6600 V, 50Hz

UD-Series

UDC450 IP23 Drip Proof Motor


Type A

750850950950

1060106011801180

B

12501250125016001400180014001800

C

315315 - 570335 - 570335 - 355355 - 570355 - 570375 - 630375 - 630

ØD

85 - 12585 - 140

100 - 140125 - 140125 - 160140 - 160160 - 180160 - 200

E

170 - 210170 - 250170 - 250210 - 250210 - 250210 - 250250 - 300300 - 350

H

450500560560630630710710

HA

9501050117011701300130014701470

L

20002050 - 24502075 - 25152475 - 29152350 - 27152750 - 31152450 - 28502850 - 3250

2 - 102 - 102 - 102 - 102 - 102 - 102 - 102 - 10

Poles


Salient Features

Robust Steel FrameSpider type ShaftDouble Ended Radial VentilationSolid Deep Rotor Bars in Single CageEnd shield Mounted BearingsAntifriction/Sleeve BearingsDynamically Balanced RotorsClass 'F' Insulation with Class 'B' temp. riseEase of MaintenanceSpace Heaters

Cane-levellerCane CutterPump (Indoor)

Rolling MillLevellerRubber MillFansCompressors

Fibrizor

UD Series are Specially Designed for Applications Like

Technical SpecificationShaft Height 355 - 710 mm

Cooling IC01A1

Insulation Class H,F with VPI, RR


Protection IP23

Rotor Constructions SR / SCR

Standards IEC60034 / IS:325

Voltage & Frequency 3.3 kv to 11kV, +/-10% & 50 Hz, +/-5%



† UD800 and UD900 are also available on request


UD-Series

Cat

. No.

CG

/ M

7 /

Sep

09H

T /

ØD

E C B

L

AHA

H

VUDC1700 IP23 Drip Proof Motor

UDC 450 E

UDC 500 E

UDC 560 E

UDC 560 G

UDC 630 F

UDC 630 H

UDC 710 F

UDC 710 H

High Voltage Totally Enclosed Tube Ventilated (TETV)TV Series Induction Motors

CG totally enclosed tube ventilated (TETV) motors perform in the most demanding environments load condition The ‘TV’ series are TETV motors most suitable for highly dusty humid and polluted atmosphere. TV series motors are used in industries such as cement, steel, tyre /rubber paper industries, refineries, petrochemicals, fertilizers, power generation plants etc.

Built to LastThe integrated heat exchanger is designed to add to the stiffness of the frame structure keeping stress concentration to the lowest. ‘TV’ series rotors are generally rigid in design, but flexible rotors are also engineered to meet specific application requirements. The ‘TV’ series motors are extensively used in applications requiring extreme low vibration, high reliability with minimal maintenance.

5000

4000

3000

2000

1000

0

4 6 8 10 12 Poles RPM1500 1000 750 600 500

23000

kW


CG deliver variants of the TV-Series motor (with 11kV 60Hz. higher poles/low speed). Special mounting arrangement can also be built as per customer requirement. CG also supply configurations of TV-Series motors with sleeve bearings, double shaft extension, low vibration, low noise levels , motors for hazardous areas. Additional sensors (vibration sensors, speed sensor, contact thermometer) can be provided to compliment motor monitoring and fault protection units.

Mounting

Type

Degree of

Protection

Cooling

Type

Rotor

Type

IM B3

IM VI

IM B3

IM VI

Squirrel

Cage

Slip Ring

TVC Series

VTVC Series

TVR Series

VTVR Series

IC5A

1A1

IEC

600

34-6

/ IS

: 63

6262

IP55

/ IP5

4IE

C 60

034 /

IS: 4

691

IEC 60034-7IS: 2253

Modular variants in the ‘TV’ range

Ensuring a very low vibration level enhances the life of motor, this is achieved through a sturdy construction and careful three stage balancing of rotor to very high accuracy as per ISO 1940 Shafts are subjected to stringent stage wise quality checks after fabrication & machining TV range comply to IEC 60034-9 and IEC 60034-14 noise and vibration standards.

• Sturdy Construction • High Performance • Less Noise

• Low Vibration• Easy Maintenance• Highly Reliable

Advantages

TV Series Output Chart, 3300-6600 V, 50Hz

TV-Series

Flange Mounted (IMV1) VTVC-Series,1080 Frame


Gen

eral

Arr

ang

emen

t D

raw

ing

ØNP

ØM

AB

ØD

E

H


A

H

HC ØD

E C BL

Cat

. No.

CG

/ M

7 /

Sep

09H

T /


Type Poles ØD E ØM ØN P H


VTVC 940 D

VTVC 940 E

VTVC 1080 D

VTVC 1080 E

VTVC 1080 F

VTVC 1220 D

VTVC 1220 E

VTVC 1220 F

VTVC 1700 E

VTVC 1700 F

100100125125125

125 - 140125 - 140140 - 160140 - 180180 - 200

210210210210210

210 - 250210 - 250210 - 250250 - 300 250 - 300

940940

10801080108012201220122017001700

880880

10001000100011201120112016001600

1000100011501150115013201320132018001800

2400260023252525275024002600280026752875

4 - 6 4 - 6

4 - 104 - 104 - 104 - 124 - 124 - 124 - 124 - 12

Technical SpecificationShaft Height IMB3 400 - 710 mm

Type of Mounting IMB3,IMV1

Protection IP55

Rotor Construction Squirrel Cage / Slip Ring Rotor

Standards IEC 60034 / IS: 325

Frame Size IMV1 740/940/1080/1220/1700

Cooling IC5A1A1


Insulation Class H, F with VPI

2 - 62 - 8

2 - 102 - 122 - 122 - 12 2 - 12

Type Poles

800850950

1060106012501250

1250125012501250140014001600

315355355

335 - 570335 - 570375 - 570375 - 570

85 - 10085 - 11085 - 125

125 - 140125 - 140140 - 160140 - 160

170 - 210170 - 210170 - 210210 - 250210 - 250210 - 250210 - 250

450500560630630710710

985105012251355135515001500

22752325 -24502350 - 25002300 - 28502500 - 30502600 - 31252800 - 3325

A B C ØD E H HC L



† TVC800 is also available on request

TVC450E

TVC500E

TVC560E

TVC630E

TVC630F

TVC710F

TVC710G

AB

2300230025002500250026002600260028002800

TV-Series

Large Re-rolling mill duty induction motors

Specifications of RRM Range of Asynchronous Motors.

ROTORVOLTS

ROTORAMPS

FULLLOAD SPEED

FULL LOAD CURRENT

PULL OUT TORQUEHP FRAME

275275275275275275275275275

738739739737735737737739741

KMR 450 SKMR 450 SKMR 450 SKMR 450 SKMR 500 MKMR 500 MXKMR 500 LKMR 560 LKMR 560 LX

455520610665680820

105010701500

350400500600800

1000125015002000

488558694805

10521350162519182549

340340365400530540530625590

Constructional Features

Stator The stator coils are made from class 'F' varnish, bonded, double glass covered rectangular copper strips.For HT motors, thermosetting type mica-based insulation system is used. The stator windings are designed and manufactured with specially incorporated strapping methods to ensure high degree of mechanical rigidity making them suitable against vibrations and electromechanical forces during starting and overloading conditions encountered in re-rolling mill applications.

RotorThe rotor winding is made up of class 'F' insulated, heavy duty, rectangular copper strips. Connections between bars as well as the phase interconnections are tig brazed ensuring high thermal and mechanical strength.Banding of rotor overhang is done by means of high tensile resin loaded glass tapes which prevent flaring of the overhangs due to centrifugal forces, vibrations, surge loads, etc.

ShaftHeavy duty shafts are manufactured from carbon steel forgings as per IS 2004 and are 100 percent ultrasonically tested to detect any flaws / defects, thus ensuring long life. Spider shaft construction with large effective diameters, ensures very low rotor deflections, and thus, low vibrations and smooth operation.

BearingsHeavy duty grease-lubricated, anti-friction bearings are liberally selected for long life under the worst operating conditions. On-line greasing arrangement is provided as a standard feature.

SlipringsOver-sized sliprings with large creepage distances are mounted external to the main enclosure on the non-drive end, for ease of maintenance. Inspection windows are also provided for monitoring the condition of the slipring and brushes.

BalancingRotors are dynamically balanced to Grade 2.5 as per ISO 1940, thus ensuring low vibration levels.

AccessoriesSpace heaters of adequate ratings are fitted inside the motors to prevent moisture condensation on the windings during shut down of the motor.6 Nos. PTC (Positive Temperature Coefficient) type thermistors for monitoring the stator winding temperature and 2 Nos. RTDs (Resistance Temperature Detectors) or DTTs (Dial Type Thermometer) for measuring the bearing temperatures are also available on request.

Quality ControlStringent quality checks at all critical stages viz. in-coming, in-process, final assembly and testing, ensure high quality and reliable products.

Drip Proof (IP23) KMR500L, 1250HP Re-rolling Mill Duty Motor

Over the years CGL has developed a highly standardized range of motors dedicated specifically to re-rolling mill industry. Re-rolling mill duty motors are used to drive re-rolling mill for rolling hot steel billets into rods, flat bars, rails, channels, angles sheet etc under arduous condition of widely fluctuating loads and sudden overloads which last few seconds. CGL re-rolling mill duty induction motors are compact, robust, simple construction requiring least attention and offering greater reliability

KMR-Series

Rugged Design Crompton Greaves large re-rolling mill duty induction motors

are equipped with IP23 (IEC 60034-5, IC0A1, IEC 60034-6)

Suitable for 3 phase, 415 volts ± 10% & 50Hz ± 5%Class F insulated stator and rotor winding (temperature index 155°c) suitable for 45°c ambient with temperature rise restricted to 75°c by resistance (class B rise)Suitable for 125% class IV overload for 2 Hrs. typifying re-rolling mill dutyAll performance figures are subjected to tolerances as per IS: 325/ IEC 60034-1All main dimension conform to IEC 60072-ATo monitor winding temperature motors are equipped with PTC thermistorMotors of higher ratings and higher voltages with different frequency, are also available on request.



TypeRating

HP/ kW

KMR 450 S

KMR 450 S

KMR 450 S

KMR 450 S

KMR 500 MX

KMR 500 MX

KMR 500 L

KMR 560 L

KMR 560 LX

Poles A B C ØD E H HC L

888888888

125125125125140140140170160

210210210210250250250300300

450450450450500500500560560

104010401040104011751175117512951295

225022502250225025502600270029903200

750750750750850900

100011201250

355355355355450450450500500

850850850850950950950

10001000

350 / 261400 / 298500 / 373600 / 448800 / 597

1000 / 7461250 / 9321500 / 11192000 / 1492


Fabricated Type Slip Ring Unit Spaciously Designed Terminal Box Wound Rotor


HC

H

A

ØD

E C B

L

KMR-Series

Cat

. No.

CG

/ M

7 /

Sep

09H

T /

Flameproof Motors For Hazardous Area Applications

Motors for hazardous area represent one of CGL’s special area of focus. The regulatory requirements & the scenario in which CGL's customers operate are complex and constantly changing with the introduction of new European and Indian standards. Among the latest development CGL ensures that its products comply with relevant regulations.

Testing and certification

Motors conform to latest IS/IEC standards Flameproof (Exd) motors have to meet tough requirements with regard to withstanding and preventing transmission of internal explosion. The latest IEC and EN standards specify criteria for risk assessment and gas environment tests for the motor designs. CGL motors are tested by CIMFR, formerly CMRI) Dhanbad and approved by Statutory bodies like

DGMS) Dhanbad for use in mines and by PESO, formerly CCOE)

Nagpur for use in surface industries.

Central Institute of Mining and Fuel Research (Directorate General of Mine Safety (Petroleum and Explosive Safety Organization (

Crompton Greaves Large Flameproof Motors are robust, compact and simple in construction which need minimum of attention. They are best suitable for conditions encountered in applications, such as:

• Frequent movements during coal extraction.• Rigorous transport system.• Restriction in space due to narrow lanes.• Inadequate maintenance facilities.• Impact of falling stones/coal and debris,

dusty and damp conditions.• Necessity to maintain lower surface

temperatures.• Hazardous gases and combustible coal dust.• Fluctuating loads.• Wide fluctuations in supply voltage.

Application groups

Depending on the intended use, explosion proof electricaloperating equipment is divided into two major groups:

Group I Equipment for coal mines (only special designed motorsfor mines can be used)

Group II Electrical equipment for use other than mines (surfaceindustry) Group II motors with flameproof enclosure arestill further divided into gas groups: IIA, IIB & IIC.

Temperature Classes

Ignition temp. for gas vapour °C

TemperatureClass

Max. permitted temperature equipment °C

Applications

CGL offers Flameproof motors for hazardous areas for applications such as fans, pumps, compressors, blowers, and areas where inflammable gases/ vapours are likely to be present such as oil & gas ( on-shore / off-shore ) exploration sites, oil & gas terminals, refineries, petrochemicals, fertilizers plants and chemical industries. CGL offers Flameproof Ex ’d’ motors for zone-I & II gas group I , IIA, IIB complying to IS: 325 / IEC 60034-7 IS: 2148 - 2004 & IEC 60079-1:2007Note: Motors for gas group IIC are also available on special request

> 450> 300< 450> 200 < 300> 135< 200> 100< 450> 85< 100

45030020013510085

T1T2T3T4T5T6

“CG Launches Series FLP Motors”ne

FLP Output Chart, 3300-6600 V, 50Hz

2 Poles

RPM

kW

4 6 83000 1500 1000 750

1500

1200

900

600

300

0

Zone 2

Zone 1

Zone 0

Zone 2Abnormal condition Presence of explosive atmosphere Only

Zone 0

Continously Permanent presence of Explosive

atmosphere (> 1000 h per year)

Zone 2Abnormal condition Presence of explosive atmosphere Only by accident (≤ 10 h per year)

Zone 1

Occasionally Incidental presence of explosive Atmosphere

during normal duty (10 - 1000 h per year)

Zone 0

Continous presence of Explosive atmosphere in

normal operation (> 1000 h per year)

Flameproof

E

E355 & E450, Motor with Type “d” Protection

E560 Motor with Type “d” Protection & Vertical Mounting

The essential principle of electrical apparatus with flame proof enclosure is that the hazardous atmosphere is not excluded from entry into the enclosure. It is recognized that an explosion is likely to occur within the apparatus but the construction of the enclosure should be such that it shall withstand the internal explosion without any evidence of distress and shall prevent the communication of the internal ignition to the surrounding atmosphere (the term flame proof as used here is synonymous with the term “explosion proof” as used in the USA or “Explosion Proof type'd' protection” used in Germany and other continental countries)

Flameproof Induction Motors (Exd for ZONE-I, II - Gas Group IIA, IIB) Degree of Protection : IP55

Enclosure : Totally Enclosed Fan cooled (TEFC)Dimensions : As per IEC 60072-AOutput : Upto 2000kW Supply Voltage : 415,690, 3300, 6600Supply frequency : 50, 60 HzMounting : IMB3, IMV1, IMB35Frame Size : E355, E400, E450, E500, E560, E630*, E710*


TERMINAL BOX

It is designed to withstand internal pressures, in the event of explosion and to prevent transmission of such explosion to outside explosive gases / vapours. Winding leads are terminated on a pillar type epoxy moulded insulators, which are mounted on insulating mounting plate. Double compression Flameproof cable glands are also provided.ACCESSORIES

For easier and better monitoring of motor condition and for effective warning system for malfunctioning of vital parts of motors such as winding and bearing, following accessories can be provided:• Resistance Temperature Detectors (RTD) for measuring /

monitoring temperatures of winding and / or bearing.• For low voltage motors, Thermistor as thermal switch can be

provided for winding protection.• Dial type thermometers (with / without contact) for bearing

temperature indication

The terminal box has been certified to withstand fault level of 43kA for 0.25 secs.

Other Features

• Resin poor insulation system with VPI using solvent less epoxy resin.• Die penetration & Ultrasonically tested rotor shafts.• Two stage dynamic balancing of rotors complying to grade 2.5 of ISO 1940. • Copper/copper alloy bars tight fitted in slots and brazed to short circuiting ring.• Grease lubricated ball /roller bearings. • Oil lubricated sleeve bearings to withstand high speed & heavy loads.

Construction

Stator frame has a barrel type construction made from thick fabricated steel to withstand internal pressure, stringent checks like pressure tests are in place to ensure to high degree of welding quality. Adequate care is taken during machining to ensure a perfect concentricity of stator bore leading to minimum vibration level & optimum heat transfer. For higher frame sizes i.e. 630 & 710 the frame is of TETV construction. The tubes are double expanded in thick end plates to provide protection against leakage in case of explosion.


* E630 & E710 is available on request in TETV Construction


A

H HA

ØD

E C B L

Fabricated Frame for FLP

Flameproof

Cat

. No.

CG

/ M

7 /

Sep

09H

T /


Type

E 355

E 400

E 450

E 500

E 560


355400450500560

610686750850950

No. of

PolesA B C ÖD E HA H L

2 - 62 - 62 - 82 - 82 - 8

6307107108001120

254280315315335

85 - 9585 - 10085 - 100

100 - 125 100 - 125

170 - 250 170 - 250 170 - 250 170 - 300 170 - 300

1700 -15401900 - 17502150 - 20002300 - 21002450 - 2200

12001300145015001530

130 YEARS EXPERTISE INROTATING ELECTRIC MACHINES

The Hungarian Transelektro acquiredfrom Ansaldo the shares andestablished Ganz Transelektro Ltd.

Joint venture between Ganz ElectricWorks and the Italian Ansaldo, namedGanz Ansaldo Electric Ltd.

Ganz Electric Workstill the end of the 1980s

The company started the production ofthree-phase induction motors

Invention of the transformerKároly Zipernowszky, Miksa Déri,Ottó Bláthy

András Mechwart founded theElectrotechnical Department

Ábrahám Ganz foundedhis company

CGL completed the acquisitionof the Belgium-based Pauwels

Change of name to CGL(Crompton Greaves Ltd.)

The company (CPL) was taken overby Lala Karamchand Thapar

Crompton Parkinson Ltd.was established

R.E.B. Crompton foundedR.E.B. Crompton & Co.

Ganz Transelektro Electric Co. Ltd.is a wholly-owned subsidiary ofCrompton Greaves Ltd.

2000

1991

1980s

1894

1884

1878

1844

2005

1966

1947

1937

1927

2006

The original GANZ factory was founded in 1844 by Ábrahám Ganz in Budapest. Its Electrotechnical Department was established in 1878 by András Mechwart and in the same year the first d.c. motors and dynamos were built. In 1881 three engineers of the company, namely Károly Zipernowszky, Miksa Déry and Ottó Bláthy elaborated and built the first industry purpose transformer, which established the worldwide reputation for the company. Ganz also has been manufacturing electric traction equipments since 1892. Manufacturing of 3-phase induction motors began as early as 1894. The first electrified main line in Europe and the World’s first HV alternating current railway was supplied by Ganz in “Val Tellina”, Italy in 1902. During the following about 100 years the company supplied various electrical equipment for the energy generation- transportation- and distribution industries in several countries of the world, and numerous inventions have been worked out. The company was known as Ganz Electric Works up to the end of the 80’s. In 1991 a joint venture was founded with the Italian Ansaldo Group, called Ganz Ansaldo Electric Ltd. In 2000 the Hungarian Transelektro company acquired its shares from Ansaldo and following that the company name became Ganz Transelektro Electric Co. Ltd. Ganz Transelektro Electric Co. Ltd. is the biggest electric equipment manufacturer in Hungary. The variety of equipment are manufactured according to the specific needs of the customer. Our rotating machines can be horizontal or vertical mounted according to various constructions, can be tailor made or serial manufactured up to 30 MW maximal output. Traction motors and traction generators are also manufactured for traffic conveyances. Our references are available in several countries of Europe, Asia and Africa. Our products are manufactured according to ISO 9001:2000 and ISO 14001:2004 quality assurance systems.

Our product range:

• Induction MotorsSquirrel Cage Rotor:500 kW–15000 kWWound Rotor:500 kW–10000 kW

• Synchronous Generators1000 kVA–30000 kVA

• Traction MachinesAC & DC Machines:150 kW–1000 kW

CG - Hungary

CG - Hungary

FH Series Output Chart,6600 V, 50Hz

10000

8000

6000

4000

2000

012 Poles

RPM4 6 8 10

5001500 1000 750 600

kW


FT Series Output Chart,6600 V, 50Hz

12 Poles RPM

4 6 8 105001500 1000 750 600

8000

7000

6000

5000

4000

3000

2000

1000

0

kW

Cat

. No.

CG

/ M

7 /

Sep

09H

T /

CG Electric Systems Hungary Zrt.

Rotating Machines Business Unit

H - 1095 Budapest Máriássy Utca 7Tel : +36 1 483 6655Fax : +36 1 483 6637E-mail : [email protected]

FR Series Output Chart,6600 V, 50Hz

12 Poles RPM

4 6 8 105001500 1000 750 600

10000

8000

6000

4000

2000

0

Industry Segment

Applications

Applications

Mechanical Specification

Quality & Testing

Electrical Specification

General

Cat

. No.

CG

/ M

7 /

Sep

09H

T /

Standards

Reference List

1800150016001025102428002200160033002600220020501020437515002500250010003400220012502775150013001025285017502600175012332200270015001370120032001750125022002850400017504000320017502200250014551500260026002000315025002360220012001680345015002500145014501370137012002200220022001200

66006600660066006600660066006600660066006600660066006600660066006600660066006600660066006600660033006600660066006600660066003300660011000330066006600660066006600660066006600660066006600330011000660066006600660033003300660066003300660033006600660066006600110001100033006600660066006600

1111111111211122231111212116441112121421121221212111111111161111111111

1992199219921992199319931993199319941994199419941994199419941994199419941995199519951996199619961996199619961997199719981998199819981998199919991999199920002000200020002000200020002000200020012001200120012001200120012001200120012002200220022002200320032003200320032003200320032004

CACASPDPCACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACASPDPCACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACASPDPCACACACACACACACACACASPDPCACACACATETVCACACACACACACACACACACACACACACACA

Andhra CementsAndhra CementsAmbuja Cements Ltd.Ambuja Cements Ltd.Grasim Industries Ltd.Ambuja Cements Ltd.Ambuja Cements Ltd.Ambuja Cements Ltd.Grasim Industries Ltd.Grasim Industries Ltd.Grasim Industries Ltd.Grasim Industries Ltd.Grasim Industries Ltd.Grasim Industries Ltd.Maihar CementMaihar CementMaihar CementMaihar CementGrasim Industries Ltd.Grasim Industries Ltd.Grasim Industries Ltd.Binani CementBinani CementBinani CementBinani CementMadras Cements Ltd.Madras Cements Ltd.Binani CementMadras Cements Ltd.ACCACCACCAndhra CementsBinani CementACCMadras Cements Ltd.Madras Cements Ltd.Penna Cement Ind. LtdMadras Cements Ltd.Madras Cements Ltd.Madras Cements Ltd.Madras Cements Ltd.Madras Cements Ltd.Madras Cements Ltd.Madras Cements Ltd.Madras Cements Ltd.Larsen & Toubro Ltd.The India Cements Ltd.Chola Cements Ltd.Binani CementBinani CementMadras Cements Ltd.OCL India Ltd.Indorama Cement Ltd.Larsen & Toubro Ltd.Associated Cement Cos Ltd.Associated Cement Cos Ltd.Grasim Industries Ltd.OCL India Ltd.Chaanakya Cements Ltd.Narmada Cement Co Ltd.Grasim Industries Ltd.Grasim Industries Ltd.Binani CementBinani CementAssociated Cement Cos Ltd.Cements Manufacturing Co. Ltd.Cements Manufacturing Co. Ltd.Cements Manufacturing Co. Ltd.The India Cements Ltd.

6666666666666666666666668666686666668666686686666666668666666666666666

710630710630560710710710710710710710630710710710710560710710630710560560630710710710710560710710630560560710710630710710710710710710710710710560630710710710710710710710560710710630710710630560560560630630630630

R e f e r e n c e L i s t Cement

Year Client, Plant Qty. Enclosure kW Voltage Pole Frame(V)

Reference List

R e f e r e n c e L i s t Cement

2600250030002600100010002000160015001450100020002000100016001500160024002550255033002500320016002400150016001600200014501500240045503100280021502000200020002300220025503100200020002400240010001600160016001600240028502500240021004800375024502500270032001000

33003300330066006600660066006600660066006600660066006600660066006600660066006600660066006600660066006600660066006600660066006600660066006600660066006600660066006600660066006600660066006600660066006600660066006600660066006600660066006600110006600660066006600

1111122211211111121112122121111111111211121112211111112211111218

2004200420042004200420042005200520052005200520062006200620062006200620062007200720072007200720072007200720072007200720072007200720082008200820082008200820082008200820082008200820082008200820082008200820082008200820082008200820082008200820082009200920092009

CACASPDPCACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACWCACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACA

Grasim Industries Ltd.OCL India Ltd.Oman Cement CompanyGrasim Industries Ltd.Maihar CementMaihar CementShree CementShree CementShree CementShree CementShree CementShree CementShree CementShree CementShree CementShree CementShree CementShree CementABB Ltd.ABB Ltd.Grasim Industries Ltd.India Cements Ltd.Madras Cements Ltd.Shree CementShree CementShree CementShree CementShree CementShree CementShree CementShree CementUltra Tech Cement Ltd.ABB Ltd.-Shree Jayajothi Cement, KurnoolABB Ltd.-Shree Jayajothi Cement, KurnoolABB Ltd.-Shree Jayajothi Cement, KurnoolAmbuja Cements Ltd.Ambuja Cements Ltd.Ambuja Cements Ltd.Ambuja Cements Ltd.Birla CorporationCement Manufacturing Comp.Deccan Cements Ltd.Jsw Cement Ltd.Madras Cements Ltd.Parasakti Cement Industries Shree CementShree CementShree CementShree CementShree CementShree CementShree CementShree CementThe India Cements Ltd.The India Cements Ltd.The India Cements Ltd.The India Cements Ltd.Zuari Cements Ltd.Zuari Cements Ltd.ABB Ltd.-Shree Jayajothi Cement, KurnoolGrasim Industries Ltd.LNV Technologies Pvt. Ltd.Sagar Cement Ltd.Shree Cement

6666666666466666666666666666666666666666666666666666666666666664

710710710710560560630560560560560630630560560560560710710710710710710560710560560560630560560560710710710710630630630630630710710710630710710560560560560560710710710710710900710630710710710560


Reference List

R e f e r e n c e L i s t Irrigation/Water Supply

11251120125015001500150011201750175011202500175017501500125017507501500125011001000

110001100011000660066006600110001100011000110001100011000110001100011000110001100011000110001100011000

112112142111132222212

200220042004200420052005200620062006200620072007200720072008200820082009200920092009

CACACACWCACASPDPCACACACACACWCACACACACACWCACWCACACACACACWCACACACACACACACASPDPCACACACA

Walchand Industries Ltd.Fivescail - KCP Ltd.Rajshree Sugars & Chemicals Ltd.National Heavy Engg Co-op Ltd.National Heavy Engg Co-op Ltd.National Heavy Engg Co-op Ltd.Gem Sugars Ltd.SS EngineersWalchandnagar Industries Ltd.Gem Sugars Ltd.The Dhampur Sugar MillsKumbhi Chini MillsWalchandnagar Industries Ltd.Uttam Industrial Engg. Ltd.Walchandnagar Industries Ltd.Walchandnagar Industries Ltd.Wahid Sandhar Sugars Ltd.Kinyara Sugar Ltd.Vedant Equip Sales & Service Pvt. Ltd.Walchandnagar Industries Ltd.Isgec John Thompson

888888888888888888888

630630630630710710630710710630710710710630630710560630630630560

Sugar

11501200136015001505125013001300150015004500105018502300230011251320175015701015113017502250147517751475142514251300112014501700147514501525161515001475120521001700145014001250

330033006600660066006600660066006600660066006600660011000110003300330066001100066006600660066006600660066006600660066006600600066006600660066001100011000660033001100011000660066006600

3222233455222232536615334546366161146721634951815

19931997199920002000200020012001200120012001200120012002200220022002200320032003200320032004200420042004200420042004200420042006200620062007200720082008200820082008200920092009

CACWSPDPSPDPCACWCACWCACACACACACACACWCACWCACWTETVCACACACWCACWCACWCACATETVCACATETVCACWTETVCACACACACACACACACACACACACACACACASPDPCACWCACACACACACACACWSPDPSPDPCACACACACACACACASPDPSPDP

Mather & Platt Pumps Ltd. A/c BMCDLF - MahaprabhaKBL - A IrrigationSubhash Projects & Mktg. Ltd.Subhash Projects & Mktg. Ltd.KBL - AlmattiKirloskar Brothers Ltd.Kirloskar Brothers Ltd.Subhash Projects & Mktg. Ltd.Subhash Projects & Mktg. Ltd.KBLKBLKBLKirloskar Brothers Ltd.Kirloskar Brothers Ltd.Kirloskar Brothers Ltd.Mather & Platt Pumps Ltd.Kirloskar Brothers Ltd.Kirloskar Brothers Ltd.Subhash Projects & Mktg Ltd.Mather & Platt Pumps Ltd.Mather & Platt Pumps Ltd.Kirloskar Brothers Ltd.Kirloskar Brothers Ltd.Kirloskar Brothers Ltd.Kirloskar Brothers Ltd.Kirloskar Brothers Ltd.Kirloskar Brothers Ltd.Kirloskar Brothers Ltd.Kirloskar Brothers Ltd.Kolkata Metropolitan Water Corp. Ltd.Kirloskar Brothers Ltd.Kirloskar Brothers Ltd.IVRCLKirloskar Brothers Ltd.Mather & Platt Pumps Ltd.Kirloskar Brothers LimitedKirloskar Brothers LimitedSubhash Projects & Mktg Ltd.IVRCLIVRCLKirloskar Brothers LimitedWPIL Ltd.WPIL Ltd.

68121081212128844128864868128124124414414884612121268666168

450710122012201220170017001700122012205601220170012201220630500170071063017001700170050017005005001700500170063063050012201700170071056056017001700122017001220


Reference List

R e f e r e n c e L i s t

180011602153253901100125071063417204000132535011507506252002501450185014501655140025071031538590045001050150013251250220180040001800550

33006600330033006600660033003300330066006600660063003300630063006600660066006600660066006600660066006600660066006600660066006600660066006600660066006600

813104331121211122155511276113233511111

19901991199219921993199419951996199619971998199819992000200020002000200020012001200120012001200120012001200120012001200120022002200220022002200220022002

CACACACACACACACACACATETVSPDPTETVSPDPCACACACWCACASPDPCACWSPDPCACACACATEFCCACACACACACACACATETVSPDPCACATEFCCACACACACACWTETVCACACACACACATETVTETVCACWTETVCACA

Mather & Platt - MSEBWBPDCLMather & Platt - NTPC TalcherIndure - NTPCIndure - NTPCMRPL- EILBoving ForessMseb - ChandrapurDVC - CTPCABB - Mseb KoradiAECOKBL - KPCLMather & Platt PumpsMather & Platt Pumps Ltd.Mather & Platt Pumps Ltd.KSB Pumps Ltd.KSB Pumps Ltd.Gujarat Ind. Power Co. Ltd.Kirloskar Brothers Ltd.Kirloskar Brothers Ltd.Kirloskar Brothers Ltd.Neyveli Lignite Corp. Ltd.Neyveli Lignite Corp. Ltd.Bangladesh Power Dev BoardThe Indure Ltd.The Indure Ltd.West Bengal Power DevelopmentKarnataka Power Corp. Ltd.KSB Pumps Ltd.KSB Pumps Ltd.Kirloskar Brothers Ltd.Kirloskar Brothers Ltd.Kirloskar Brothers Ltd.National Thermal Power Corp. Ltd.Neyveli Lignite Corp. Ltd.Neyveli Lignite Corp. Ltd.Neyveli Lignite Corp. Ltd.AP Power Generation Corp. Ltd.

1264448641282128662241212121244444104412121246468

17006309404509407105605601080710710170094045012204503554001700170017003557109009403555006305601220170017001700940800710710450

Power

16551450165535003500350012006406502602001601322243363002506601000350180300500373

6600660066006600660066006600330066006600660066006600330066003300330011000660066003300330066006600

1451212122221231121221114

199020002002200320032003200320032004200420042004200420042004200820082008200920092009200920092009

CACACACACACACACWCACWCACWTETVTEFCCACACACACACACACACACATETVTETVTEFCTEFCCACACACACACATEFCTEFCTETVTETV

M & P-NLCDeepak Sobhipyu Corp. Pvt. Ltd.Neyvelilignite Corp.Neyveli Lignite Corp. Ltd.Neyveli Lignite Corp. Ltd.Neyveli Lignite Corp. Ltd.Neyveli Lignite Corp. Ltd.South Eastern Coalfields Ltd.FFE Minerals India Ltd.FFE Minerals India Ltd.FFE Minerals India Ltd.FFE Minerals India Ltd.FFE Minerals India Ltd.Ingersoll Rand (I) Ltd.Ingersoll Rand (I) Ltd.Mather & Platt Pumps Ltd.Mather & Platt Pumps Ltd.Aramco EngineersMc Nally Bharat Engg Co. Ltd.Mc Nally Bharat Engg Co. Ltd.Eastern Trade AgencyEastern Trade AgencyRevathi Equipments Ltd.Revathi Equipments Ltd.

121212444444444444442444444

800710800630630630710450450355355355355400450355355450450400355450500450

MiningYear Client, Plant Qty. Enclosure kW Voltage Pole Frame

(V)

Reference List


3332202152752251160720360200150098568017502153403052759603003003003604291100147516502850580340360275275275150017001615170020502200290290290300350350350350350220127012601700150014001500160012201800250325321860165019101500145014001020

660066006600660066006600660033003300660066003300330066003300660066006600660066006600660066001100066006600660066003300660033003300330066006600110006600660066003300330033003300330033004153300660066006300630066006600110006600660011000660033003300330033006600660066006600110006600

1113319117722152323932183223541274113711510533231223315453341214531421

20022002200220022002200220032003200320032003200320032003200320032003200320032003200320032003200420042004200420042004200520062006200620062006200720072007200720082008200820082008200820082008200820082008200820082008200820082008200820082009200920092009200920092009200920092009

CACATETVCACATEFCTEFCCACASPDPTEFCTEFCCACACACACACACACATETVTEFCTEFCTEFCCACATETVTETVTETVTEFCCACASPDPCACACACACACACACATEFCTEFCTEFCTEFCTEFCCACACACWSPDPCACACACACACATEFCTEFCTEFCTETVTETVTETVTETVCACACACACACATETVTETVCACACACACACATETVCACACACACACACACATETVCACACACASPDPCACACACASPDPCACASPDP

AP Power Generation Corp. Ltd. AP Power Generation Corp. Ltd.AP Power Generation Corp. Ltd.DC Industrial Plant Services Ltd.DC Industrial Plant Services Ltd.West Bengal Power DevelopmentKirloskar Brothers WPIL Ltd.National Thermal Power Corp. Ltd.National Thermal Power Corp. Ltd.WPIL Ltd.WPIL Ltd.WPIL Ltd.Alstom Power India Ltd.AP Power Generation Corp. Ltd.Atlas Copco (I) Ltd.Atlas Copco (I) Ltd.Atlas Copco (I) Ltd.Bangladesh Power Dev BoardDC Industrial Plant Services Ltd.DC Industrial Plant Services Ltd.DC Industrial Plant Services Ltd.Gujarat Electricity BoardCESC Ltd.Mather & Platt PumpsWPIL Ltd.WPIL Ltd.KSB Pumps Ltd.Alstom Projects India Ltd.Atlas Copco (I) WPIL Ltd.Mather & Platt PumpsDCIPS A/c NTPC VindhyachalDCIPS A/c NTPC VindhyachalDCIPS A/c NTPC VindhyachalMather & Platt Pumps Ltd.Kirloskar Brothers Ltd.Mather & Platt Pumps Ltd.Kirloskar Brothers Ltd.BGR Energy Systems Ltd.Megha Technical & Engg. Ltd.DCIPS A/c NTPC BarhDCIPS A/c NTPC BarhDCIPS A/c NTPC BarhKBL A/c NTPC BarhKBL A/c NTPCBarhKBL A/c NTPCBarh KBL A/c NTPCBarhShubham Fluid Controls A/c NTPC RihandVinamra Corporation A/c NTPC KahakgaonVinamra Corporation A/c NTPC KahakgaonMather & Platt Pumps Ltd.Mather & Platt Pumps Ltd.Kirloskar Brothers Ltd.Kirloskar Brothers Ltd.Kirloskar Brothers Ltd.Kirloskar Brothers Ltd.WPIL Ltd.WPIL Ltd.The Indure Pvt. Ltd.Unicon A/c NTPC KanihaUnicon A/c NTPC KanihaUnicon A/c NTPC KanihaWPIL A/c NTPC TalcherFlowmore A/c NTPC HarduaganjMather & Platt Pumps Ltd.Mather & Platt Pumps Ltd.Subhash Project & Marketing Ltd.Godavari Power & Ispat Ltd.S. B. M. Enterprise

44444612441218108444444444812121246444441281212664444668444441212121212812444101212128612

355400355315355630118035535517001700122050040035535535545045045045040056071017001700630450355355315315315170063017001700630630315315315740108010801080355355355630630170017001700170017004501700355450400122017001700170012205601700

PowerYear Client, Plant Qty. Enclosure kW Voltage Pole Frame

(V)

Reference List

5605605607104506305605007107106305607107104005605605604506305601080450170071063017005606306305606306306307105005606306306307106305607101700170063012205006306301700630

Petro/Chemical199720002001200120022002200220022002200220022003

Reliance Petroleum Ltd.Reliance Petroleum Ltd.Indian Oil Corporation Ltd.Kirloskar Ebara Pumps Ltd.Kirloskar Ebara Pumps Ltd.Reliance Petroleum Ltd.Reliance Petroleum Ltd.Dresser Rand India Private Ltd.Dresser Rand India Private Ltd.Dresser Rand India Private Ltd.Dresser Rand India Private Ltd.Indian Oil Corporation Ltd.

131332112122

TEFCTETVCACACACAFLPTEFCCACACACACACACACACACATETV

1750400325250280250250725466300260800

660066006600660033006600660066006600330066006600

244424418186182

355940450355450355355630630450560560


475100063020003502611630450105031006301119160076550047065062780090052242058049601100100032506503400224013501000375037501550100017501000224037503100294025002350180015001492130011001000100018601600

66006600660066006600110006600660033001100066003300660066006600660066006300330033006600330033001100063006600110006300600066006600660066006600630066006600660066006600660063063066006600660033006600660063006600660011000

311122121111421131221211112111114112111113215512111101

19921992199219931993199319931994199519951995199619961997199819981998199919991999199920002001200120022002200220032003200320032003200320032004200620062006200720072008200820082008200820082008200820082008200820092009

TETVSPDPCACACACAFLPCACACACATETVTETVCACACACASPDPCACATETVCACATETVTETVSPDPCACACACACACATETVCACACACATETVTETVCACATETVCACACACWSPDPTETVCACWCACWTETVCACACACATETVCACWCACWCACACACACACACACACACACACASPDPCACACACATETVTETVCACACACA

Mather & Platt -TiscoKR SteelHindustan SteelSAIL - RSPBhilai SteelLloyd SteelBokaro SteelSiemens Ltd.HindalcoDSP - NiccoVSPVolvo Steel Ltd.Mather & Platt - HindalcoHindalcoBSPBSPKBL - TiscoTATA Steel Jindal StripsTATA SteelsEssar SteelJindal SteelJindal Steel & Power Ltd.Shah Alloys Ltd.The Associated Cement Co. Ltd.Hindustan SuppliersVijaya Steels Ltd.The Tata Iron & Steel Co. Ltd.Upadrasta & SonsJindal Vijaynagar SteelTransmission IndiaJRC Industries Ltd.Jindal Vijaynagar SteelJindal Vijaynagar SteelThe Tata Iron & Steel Co. Ltd.Visakhapatnam SteelNCL Industries Ltd.Visakhapatnam SteelJSW Steel Ltd.JSW Steel Ltd.Jindal Steel & Power Ltd.Siemens Ltd.Siemens Ltd.Vedant Alumina Ltd.Worthington Pumps India Ltd.Mather & PlattSB EnterpriseMather & PlattJindal Steel & Power Ltd.Inertia Iron & Steel IndsHindustan SuppliersMather & PlattHindalco

6282228444481262466682661288126410866628681066666141284668126

SteelYear Client, Plant Qty. Enclosure kW Voltage Pole Frame

(V)

Reference List


72559042021513008758105807452000800280215200800119055034020011352700160950320130018201520150010009005203553552504104003751850225255440

6600660066006600660066006600660066006600330033006600660066006600660066006600660066004156600660066006600660066006600660066006600660066006600660066006600660066006600

121221114214322143223232112412226111232222

20032003200320032003200320032003200320032004200420042004200420042004200420042004200420042004200520052007200720082008200820082008200820082008200820082008200920092009

CACACACACACACACATETVCACWSPDPTETVTETVCACACACACACAFLPCACATETVCACACACACACAFLPCACACACACACACACATETVTETVCACACACACACACACACACACACACACACACACACATETVCACACACACACACACACACACACA

Kirloskar Ebara Pumps Ltd.Kirloskar Ebara Pumps Ltd.Kirloskar Ebara Pumps Ltd.Kirloskar Ebara Pumps Ltd.Reliance Petroleum Ltd.Reliance Petroleum Ltd.Reliance Petroleum Ltd.Reliance Petroleum Ltd.Reliance Petroleum Ltd.Sulzer Pumps India Ltd.Flowserve India Controls Pvt Ltd.Flowserve India Controls Pvt Ltd.Flowserve India Controls Pvt Ltd.Flowserve India Controls Pvt Ltd.Indian Oil Corporation Ltd.Kirloskar Ebara Pumps Ltd.Kirloskar Ebara Pumps Ltd.Kirloskar Ebara Pumps Ltd.Kirloskar Ebara Pumps Ltd.Sulzer Pumps India Ltd.Paharpur Cooling Towers Ltd.Dresser Rand India Private Ltd.BOC India Ltd.Reliance Petroleum Ltd.Chennai Petroleum Corpn Ltd.Paharpur Cooling Towers Ltd.Paharpur Cooling Towers Ltd.Flowserve India Controls Ltd.Promac Engg. Industries Ltd.Mather & Platt Pumps Ltd.ITT GouldSwam Pneumatics Pvt. Ltd.Swam Pneumatics Pvt. Ltd.Swam Pneumatics Pvt. Ltd.Deepak Soabhipyu IncPromac Engg. Industries Ltd.Kirloskar Brothers Ltd.Larsen & Toubro Ltd.Flowserve India Controls Ltd.Kirloskar Ebara Pumps Ltd.Essar Oil Ltd.

2222242262244284222210182248846626664666224

4504003553557104004005605605604504004503557105004003553555008005605004506306306305005005004004004003555004004007103553551080

Petro/Chemical

Chemical/Fertilizer12001100100011003102301602804854508501450130012007602105405001601250

660033003300330033003300330041533006600330011000110006600660066003300660066006600

111112111

1112311111

19901992199219952000200120012002200320032003200420042007200820082008200820082008

CACACACACACACACATEFCTEFCFLPCACATETVCACATETVCACACACACACACACACACACACATETVCACACACA

Chambal FertilizersChambal FertilizersChambal FertilizersChambal FertilizersCoromandel Fertilizers Ltd.Coromandel Fertilizers Ltd.India Glycols Ltd.Futura Polymers Ltd.Coromandel Fertilizers Ltd.India Glycols Ltd.Indo Gulf Corpn Ltd.Indian Farmers Fertilizers Corp. Ltd.Indian Farmers Fertilizers Corp. Ltd.M/S Nagarjuna FertilizersYork India Pvt. Ltd.York India Pvt. Ltd.TLT Engineering India Pvt.Coromandel Fertilizers Ltd.Mather & Platt Pumps Ltd.York India Pvt. Ltd.

10222464106102101010224242

710450450450400400355450500500560800800560450355450500740500


Reference List


4504505004504006304001320110090080077570015001000850800630

66006600415660041560004156600110001100011000110006901100011000110001100011000

111111122342223113

200120012002200220022004200420082008200820082008200820092009200920092009

CACATETVCACATETVTETVTEFCSPDPCACACACACACACACACACACACACACACACACACACACACACA

Century Pulp & PaperThe Central Pulp Mills Ltd.M/S Kaydee EngineersThe Central Pulp Mills Ltd.Star Paper Mills Ltd.M.A.H.Y Khoory & Co.West Coast Paper Mills Ltd.BILTBILTBILTBILTBILTBILTBILTBILTBILTAPPMLBILT

8688644244426444104

450560450560500500400500500500500500500630500500560450

Paper

415415415415415690690690415690690415415415690415415415690690690690

22101818666846288818226666

355450450560560355355355450500500355400940450560355400500500560630

410803280566513215021050075087030026052061016040035070050025002940

1112212112211332112123

2000200220022002200220022002200220022003200320032003200420042004200420072008200820082008

CACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACACA

Ingersoll-Rand India Ltd.Anama Energies Pvt. Ltd., PuneFutura Polymers Ltd., ChennaiDresser Rand India Private Ltd., AhmedabadDresser Rand India Private Ltd., AhmedabadAsea Brown Boveri Ltd., BangaloreAsea Brown Boveri Ltd., BangaloreAsea Brown Boveri Ltd., BangaloreM/S Kaydee Engineers, AmritsarSiemens Ltd.,MumbaiSiemens Ltd.,MumbaiKirloskar Pneumatic Co. Ltd., PuneKirloskar Pneumatic Co. Ltd., PuneKirloskar Pneumatic Co. Ltd., PuneAsea Brown Boveri Ltd., BangaloreDresser Rand India Pvt. Ltd., AhmedabadIngersoll-Rand India Ltd., NarodaChico Traders BILT, PuneBILT, PuneSiemens Ltd., KolkataSiemens Ltd., Kolkata


VFD Application Motors

Cat

. No.

CG

/ M

7 /

Sep

09H

T /

Documents

CG HT Motors Catalogue