Cenik Cerven 2011 A4 ENG Pro WEB

7/22/2019 Cenik Cerven 2011 A4 ENG Pro WEB

1/66

PRICE LIST 2011

Energy-saving solutions


2/66

Short list of changes

(against autumn 2010)

News:

EcoAir 105 Heat Pump.................................................................................................................. 4

IR12 TC 101 intelligent controller, also for heat pump control ...................................................... 5

Solar thermosyphon systems.........................................................................................................8

Kits for horizontal installation of KPG1 solar collectors .................................................................6 a 10

Flowmeters with integrated temperature sensor............................................................................14

Sentinel Kinetic B Plus ventilation / heat recovery units................................................................ 20

Installation accessories for ventilation systems............................................................................. 21

RGC H 120l storage water heater .................................................................................................25

Expansion vessels for drinking water with exchangeable bag....................................................... 30

TP simple mechanical room thermostats....................................................................................... 31

Regulus UR controller with OTC.................................................................................................... 32

LK mixing valves and actuators..................................................................................................... 34

TSV3 thermostatic valves for solid fuel boilers.............................................................................. 37

Regulus stainless-steel plate heat exchangers DV 503-20, with insulation................................... 39

TERMOMIX - DHW thermostatic valve, 3/4", 38-65C................................................................. 40

Flue pipes for cascades of condensing boilers, 160...................................................................... 59

Flue pipe on the facade, for condensing boilers, in stainless steel................................................ 60

Encased thermostats..................................................................................................................... 62

Final Sale

TP01 room thermostat.71

Elesta controllers with OTC . 71

Orders:

E-mail: .... [email protected]

Fax to Sales Dept: . + 420 241 773 296

Fax: ...+ 420 241 763 976

Phone:+ 420 241 765 191

Opening hours: ...Mo-Fr 7.30-16.30

Website: www.regulus.eu

Price change reserved. The price list is valid from April 11, 2011.

Current price list is always available from our website.


3/66

Price list 2011 valid from April 11, 2011Price change reserved

Heat Pumps

Regulus CTC air-to-water heat pumps.................................................................................................................4

Regulus CTC ground-to-water heat pumps......................................................................................................... 5

Distribution

Flat solar collectors and mounting sets................................................................................................................ 6-7

Evacuated tube solar collectors...........................................................................................................................8

Solar thermosyphon systems............................................................................................................................... 8

Mount kits for fixing tube solar collectors............................................................................................................. 9

Roof anchors, collector supports for flat roofs, mounting accessories 10

Mounting accessories..11

Valves, air separators, flow regulators and balancing valves for solar systems.................................................. 12

Solarten antifreeze liquid for Regulus solar systems, accessories ........................ ............................ ................. 13

Solar controllers ................................................................................................... 14

Solar pump stations ............................................................................................................................................ 15

Pre-insulated pipes for solar systems.................................................................................................................. 16

Pipes insulation Aeroflex.... 17

Stainless steel flexible pipes KOMBIFLEX . 18

Stainless steel hoses and pipes for gas and water ....... 19

Ventilation with heat recovery .............. ............................ .......20-21

Aluminum section radiators 22

Solartherm - compact system - solar tank with gas or el. fired boiler 23

Hydronic fireplace insert and fireplace with high-efficiency heating water heat exchanger 23

Solar storage water heaters, stainless-steel water heaters................................................................................. 24

Storage water heaters.......................................................................................................................................... 25-26

Accumulation tanks with integrated DHW heating. 26-27

Accumulation tanks and insulation sets, finned copper heat exchangers for flanges.. 28-29

Expansion vessels for heating systems, for drinking water and solar systems..30

Room thermostats. 31

Intelligent controllers with OTC. 32

Intelligent controllers for heating circuits, differential controller.33

Motorized ball valves for sanitary and heating water, solenoid valves 33

Mixing and zone valves for heating systems34

Manifolds for heating systems. 35

Pump stations for heating circuits and boilers .., 35-36

Safety, discharge and air vent valves36

Draft regulator, JBV1 and DBV1 recooling valves for solid fuel boilers 37

Thermostatic mixing valves for solid fuel boilers . 37

Circulation pumps................ 38

Stainless-steel plate heat exchangers 39

Electronic water treatment, magnesium and electronic anode rods.. 40

Thermostatic mixing valves for DHW, recooling capillary valves for solid fuel boilers 40

Descaling pumps, chemical agents for cleaning and protection. 41

Thread sealants.. 41

Electric heating rods for storage water heaters and accumulation tanks.. 42

Electric heating rods for bathroom towel radiators .43

Thermometers and pressure gauges, direct mount.. 61

Encased thermostats.......................................62

6-7

8

8

9

10

11

12

13

14

15

16

17

18

19

20-21

22

23

23

24

25-26

26-27

28-29

30

31

32

33

33

34

35

35-36

36

37

37

38

39

40

40

41

41

42

43

61

62


4/66

Price list 2011 valid from April 11, 2011Price change reserved

Flue ducts, flue way in aluminum - Al

60/100 Flue ducts for turbo-boilers. 44-45

80 Flue ducts for turbo-boilers. 46-47

80/125 Flue ducts for turbo-boilers. 48-49

60, 100, 60/100 Flue ducts for turbo-boilers, plastic/aluminum outer pipe and accessories50

Flue ducts, flue way in aluminum (sleeve system)

Final sale - 60/100 sleeve system. 72

Flue ducts, flue way in plastic (PP) for condensing boilers

60/100 Flue ducts for condensing boilers . 50-51

80 Flue ducts for condensing boilers . 52-53

80/125 Flue ducts for condensing boilers . 54-55

60 Flue ducts for condensing boilers . 56

100 Flue ducts for condensing boilers . 57

80 Almeva flue ducts for condensing boilers, no packaging. 58

Flue pipes for cascades of condensing boilers, 160............................................................................................ 59

Flue pipe on the facade, for condensing boilers, in stainless steel..................................................... 60

Spare parts for service and production (OEM)

Thermostats, thermometers, manometers and termomanometers, pockets and knobs 63-64


5/66

Air-to-water heat pump price list

Code

10 753 4 454,17

7 962 4 958,33

10 018 6 041,67

Code

7 787,50

8 204,17

7 964 8 291,67

9 167 8 708,33

10 022 9 375,00

10 023 9 791,67

Code

8 440 9 791,67

8 455 11 625,00

8 456 14 541,67

Code

8 454 9 541,67

8 297 10 375,00CLWI 13 heat pump for indoor installation- heating capacity of 11.8 kW at A7/W35

EcoAir 115, heating capacity of 13.1 kW at A10/W35



Air to water heat pumps for indoor installation, with air ducts

CLWI 9 heat pump for indoor installation

- heating capacity of 8.5 kW at A7/W35

Air-to-water heat pumps, compact units for outdoor installation



Compact system for heating + DHW.

Air to water heat pump, el. boiler, accum. tank, controller.

EcoAir 107 heat pump EcoEl

- heating output of 8.3 kW at A10/W35 + 1.5-9 kW el. boiler

or at temperatures below -15C a 15kW el. boiler only

integrated intelligent controller with OTC

EcoAir 107 heat pump - EcoEl solar

EcoAir 105 EcoEl heat pump




EcoAir 105 - EcoEl solar heat pump


EcoAir 110 heat pump EcoEl




EcoAir 110 heat pump EcoEl solar

Air to water heat pumps with EVI compressor,

high C.O.P., max. flow temp. 64C.

4

10 754

10 755EcoAir 105 heat pump - EcoEl solar, as above (10754), ready for solar system

EcoAir 107 heat pump - EcoEl solar, as above (7964), ready for solar system

EcoAir 110 heat pump EcoEl solar, as above (10022), ready for solar system


6/66

Ground-to-water heat pump price list, 5 years warranty

Code

8 101 5 208,33

8 102 5 291,67

8 104 5 791,67

Code

8 092 7 458,33

8 093 7 541,67

7 968 8 250,00

Code

10 011 832,92

EcoLogic controller controls the entire heating system with heat pump preference. 7 933 537,50

Kit for a remote control unit 8 299 103,75

Sms unit for use with a GSM card 7 970 604,17

Condensat tray with electric frost protection 8 624 281,25

Wall support brackets for CTC Eco Air 105, 107 and 110 heat pumps 10 722 349,58

EcoMini El 3x400 V electric boiler 8 298 616,25

Solar module for EcoHeat ground source heat pumps 10 193 290,83

7 879 3 791,67

8 736 4 166,67

Code

9 142 829,17

Code

10 320 16,67

EcoEl indoor unit

accumul. tank incl. DHW, el. boiler, intelligent controller

EcoElSol indoor unit

accumul. tank incl. DHW, el. boiler, intelligent controller incl. solar module

Backup power sources for heat pumps

Antifreeze fluid for heat pump primary circuit

Ecological antifreeze fluid for primary circuits of ground source heat pumps.

The fluid is used undiluted, freezing point -12C, 25l jerry can.

Backup power source for circulation pump of EcoAir heat pump, incl. 44 Ah accumulator

and control unit

Ground source heat pumps,

utilizing energy from deep bores or ground collectors.

EcoPart 7.5 V3 heat pump

- heating capacity of 7.6 kW at B0/W35

EcoPart 8.5 V3 heat pump


EcoPart 12 V3 heat pump


Compact system for heating + DHW.

Ground source heat pump, el. boiler, accumulation tank, controller.

IR12 TC 101

Intelligent controller for heat pumps, a solar system and 2 mixed heating circuits.

Ethernet socket, SD card slot. Contains source, 5 temperature sensors, heat pump

communication module, 2 GB memory card.

EcoHeat EU 7.5 V3,

- heating capacity of 7.6 kW + el. boiler 1.5-9 kW

EcoHeat EU 8.5 V3,


EcoHeat EU 12 V3,


Accessories to heat pumps

5

IR12 TC 101

Intelligent controller for heat pumps, solar system and 2 mixed heating circuits.

Ethernet socket, SD card slot. Contains source, 5 temperature sensors, heat pump

communication module, 2 GB memory card.


7/66

Distribution price list

Flat plate solar collectors - harp type absorber, 7 year warranty Code

7 610 370,42

9 651 370,42

8 183 495,83

10 336 541,25

Mount kits for fixing and connecting KPC1, KPA1 solar collectors Code

7 710 28,33Fixing kit for KPC1, KPA1 solar collector

**(for 4 anchors or 2 supports+1 strut)7 720 45,00

Fixing and interconnection kit for 2 KPC1, KPA1 collectors








Mount kits for fixing and connecting KPS 11 solar collectors Code

7 710 28,33

Fixing kit for 1 KPG1 solar collector


Fixing and interconnection kit for 2 KPS11 collectors






Mount kits for fixing and connecting KPG1 solar collectors Code

7 710 28,33

Fixing kit for 1 KPG1 solar collector


Fixing and interconnection kit for 2 KPG1 collectors






Mount kits for horizontal fixing and coonecting KPG1 solar collectors Code

Fixing kit for horizontal installation of 1 KPG1 solar collector


Fixing and interconnection kit for horizontal installation of 2 KPG1 solar

**(for 8 anchors or 4 supports+1 strut)

10 701 166,25

Connection kit for KPC1, KPA1, KPS11 and KPG1 collector field(G3/4" M inlet and outlet, 2 plugs, G3/8" F for air vent valve, sensor sheath)

Connection kit for KPC1, KPA1, KPS11 and KPG1 collector field

(G3/4" M inlet and outlet, 2 plugs, G3/8" F for air vent valve, sensor sheath)

Fixing and interconnection kits shall be used depending on the number of collectors. This kit is good for fixing collectors into one

array and their mutual interconnection. For this array one connection set is needed that solves connection of the array to an inlet and

outlet piping, blinding the unused collector ends and, depending on the collector type, it contains also a sensor pocket for a controller

and an air vent point.

**The kits do not include anchors or supports for an inclined or flat roof. Please select suitable types from page 10 according to your

roof and tile type.

KPC1 - BP solar collector - 100x200 cm, aperture area 1.85 m2, aluminum frame,

prismatic solar glass, copper absorber with black chrome on nickel

KPA1 - ALP solar collector - Solar Keymark certified, 100x200 cm, aperture area 1.87

m2, aluminum frame, solar prismatic glass, harp type absorber of copper pipes with laser

welded aluminum sheet with highly selective Tinox surface

KPS11 - ALP solar collector - 125x200 cm, aperture area 2.26 m2, aluminum frame,

solar prismatic glass, copper harp type absorber with Eta Plus highly selective surface

KPG1 - ALC Solar collector, Solar Keymark certified, 117 x 215 cm, aperture area 2.39

m2, aluminum frame, solar glass, harp type absorber of copper pipes with laser welded

aluminum sheet with highly selective Eta Plus surface.

The frame design enables either verical or horizontal installation.

Connection kit for KPC1, KPA1, KPS11 and KPG1 collector field

(G3/4 M inlet and outlet, 2 plugs, G3/8F for air vent, sensor sheath)

6


8/66


Flat plate solar collectors - meander and twin-harp types, 7 year warranty Code

8 081 832,92

Mount kits for fixing and connecting KPW1 solar collectors Code

8 116 2,92

Fixing kit for 1 kolektor KPW1 collector


Fixing and interconnection kit for 2 collectors KPW1






Flat plate solar collectors - meander and twin-harp types, 7 year warranty Code

8 258 562,08

8 082 624,58

Mount kits for fixing and connecting KPS10 solar collectors Code

7 229 11,67

Fixing kit for 1 KPS10 solar collector








Mount kits for fixing and connecting KPW2 solar collectors Code

8 116 2,92

Fixing kit for 1 collector KPW2 collector








Connection kit for one KPW collector field

(G3/4" M inlet and outlet)

**The kits do not include anchors or supports for an inclined or flat roof. Please select suitable types from page 10 according to your

roof and tile type.

Fixing and interconnection kits shall be used depending on the number of collectors. This kit is good for fixing collectors into one

array and their mutual interconnection. For this array one connection set is needed that solves connection of the array to an inlet and

outlet piping, blinding the unused collector ends and, depending on the collector type, it contains also a sensor pocket for a controller

and an air vent point.

Connection kit for one KPS10 collector field

(G 1/2" M inlet and outlet)

Connection kit for one KPW collector field

(G 3/4" M inlet and outlet)

KPS10 - ALP Solar collector - 114x204 cm, aperture area 2.13 m2, aluminum frame,

prismatic solar glass, meander type copper absorber with Sunselect selective surface, 2

side connections

KPW2 Solar collector - 116x193 cm, aperture area 2.01 m2, aluminum frame, prismatic

solar glass, copper absorber with ETA Plus highly selective surface, 2 top connections

KPW1 Solar collector - 121x215 cm, aperture area 2.37 m2, aluminum frame, solar

antireflection glass, copper absorber with ETA Plus highly selective surface, 2 top

connections

7

Flat plate solar collectors - twin-harp type, 7 year warranty

KPW2 Solar collector - 116x193 cm, aperture area 2.01 m2, aluminum frame, prismatic

solar glass, twin-harp copper absorber with ETA Plus highly selective surface, 2 top

connections


9/66


Code

7 126 624,58

7 127 832,92

Code

7 343 749,58

7 342 999,58

Code

11 126 1 245,83

11 127 2 004,17

11 128 1 508,33

KTU 9R2 solar collector,143x197 cm, 9 U-pipes with reflective sheet, 6 bar, aperture area 2.15 m

2

KTU Evacuated tube solar collectors, 7 year warranty

KTU 10 solar collector,

100x197 cm, 10 U-pipes, 6 bar, aperture area 0.93 m2

KTU 15 solar collector,

143x197 cm, 15 U-pipes, 6bar, aperture area 1.41 m2

KTU R2 Evacuated tube solar collectors with a special reflective sheet,

7 year warranty

KTU 6R2 solar collector,

100x197 cm, 6 U-pipes with reflective sheet, 6 bar, aperture area 1.43 m2

Solar thermosyphon systems

TSN160 thermosyphon system,

complete solar thermosyphon system for outdoor use, with enamled double wall tank

above the collector and one black painting solar collector 2,09m2, incl. holder for flat

roof, easy installation.

TSD 200 thermosyphon system,


behind the collector (low height) and one collector with selective absorber TiNox solar

collector 2,49m2, incl. holder for flat roof, easy installation.

TSN 300 thermosyphon systm,


above the collector and two black painting solar collectors each 2,09m2, incl. holder for

flat roof, easy installation.

8


10/66


Mount kits for fixing and connecting KTU 15 and KTU R9 Code

7 703 26,25

Fixing kit for 1 KTU 15 (R9) solar collector

(for 4 anchors or 2 anchors + 1 strut)

7 414 59,17

Fixing and interconnection kit for 2 KTU 15(R9) collectors


7 245 107,92



7 246 159,17



7 247 213,33

Mount kits for fixing and connecting KTU 10 and KTU R6 Code

7 703 26,25

Fixing kit for 1 KTU 10 (R6) solar collector

(for 4 anchors or 2 supports + 1 strut)

7 415 50,83



7 241 92,08



7 242 139,17



7 243 196,67


(for 10 anchors or 5 supports +1 strut)

7 244 249,17

Connection kit for a KTU or KTK solar collector field

Connection kit for a KTU or KTK solar collector field

**Fixing and interconnection kits are intended for collector field assembly with H rails and threaded fittings with

insulation. Anchors, supports and struts are not included, please select them from page 10 according to your roof and

tile type.

9


11/66


Solar collector brackets for flat roofs Code

Triangle support strut 25 10 975 62,08


Strut incl. screws for triangle support struts - flat roof 9 563 14,08

Code

Triangle strut 15 10 748 60,42



Triangle strut 60 x 9 631 66,25

Solar collectors brackets, flat roof, for horizontal KPG1 collectors Code



Strut incl. screws for triangle brackets - flat roof, for horizontal KPG1 collectors 10 908 14,38

Code

Triangle strut 15, for horizontal KPG1 collectors 11 070 57,92



Code

6 857 20,63

Hot-dipped galvanized steel anchor for pantiles 7 929 10,83

Aluminum anchor for slate tiles, adjustable height 6 920 19,96

Aluminum anchor for pantiles, adjustable height 7 013 17,79

10 159 28,33

6 932 30,96

7 320 15,63

8 891 1,00

Aluminum anchor for pantiles, for roof rafters, adjustable height

Triangle brackets for inclination adjustment, for horizontal KPG1, suitable

for anchors for inclined roofs

Bolt with clamp for fixing rails onto a roof

Roof bolt gasket

Triangle brackets for inclination adjustment, suitable for anchors for

inclined roofs

Most common anchors for inclined roofs

Stainless-steel anchor for pantiles

Stainless-steel anchor for pantiles, for roof rafters, incl. self tapping screws

x upon order

10


12/66


Code

Aluminum base rail, 6.15 m price for 6.15 m 7 009 57,92

Base rail by meter (max. length 6.15 m) price for 1 m 6 949 15,38

Extension kit for aluminum rail connection (1 connection) 6 951 23,13

M8 Travelling nut for base rail 6 925 1,17

M8x14 stainless-steel bolt for KPS10 8 294 0,42

M8x18 bolt for KPC, KPA, KPS11, KTU 7 259 0,46

M8x30 bolt+nut+washer, travelling head, for base rail slot 8 383 2,25

M8x33 bolt+nut+washer, round head, for base rail slot 6 917 2,08

Bottom fixing bracket for KPG solar collector 6 916 2,17

Fixing bracket for KPC1, KPA1, KPS11, KPW bottom rail (hook) 7 709 2,42

Bottom fixing bracket for KPS10 solar collector 8 279 2,50

Retaining aluminum bracket for KPC, KPA, KPS11, KTU 7 725 1,92

Retaining stainless-steel bracket for KPG 10 522 2,00

Retaining aluminum bracket for KPS10 8 278 2,00

Retaining bracket between 2 KPW collectors with bolt 8 169 3,63

Retaining bracket between 2 KPG collectors with bolt 10 673 4,08

Washer for hanging KTU solar collector 7 255 1,92

Threaded couplers and fittings Code

7 632 8,25

7 633 5,33

7 629 4,00

7 628 5,08

7 315 3,25

7 330 0,79

7 634 1,00

7 630 4,08

7 631 3,67

7 556 1,17

10 703 6,63

8 168 5,38

7 794 0,21

7 795 0,21

7 796 0,25

Gasket for DN12 copper pipes

Pipe for KPW collector interconnection, G 1/2" l=270 mm

Gasket for solar systems - 17x24x1,5 - 3/8" for code 7632



Pipe for KPG1 horizontal installation, G 3/4" l=320 mm

Straight hex fitting, 22 mm to 3/4"F, for KPA, KPC, KPS11 and KTU (no plug)

Gasket for DN22 copper pipes

1/2" Plug with gasket

Straight hex fitting, 12x12 mm, for KPS10

12 mm x 1/2" M straight reducing piece for copper pipes, for KPS10

Spare parts for mount and connection kits for solar collectors

X-piece for 22 mm Cu pipes for collector outlet,, 3/4" F for outlet, 1/2" F for sheath, 3/8" Fwith plug for air vent valve

Elbow for 22 mm Cu pipes, 3/4"F for collector inlet

Hex fitting+nuts for Cu pipes, 22mm to 3/4", for KPC, KPG, KPS11 and KTU

Blind hex fitting for Cu pipes, 22 mm to 3/4"F, for KPA, KPC, KPG, KPS11 and KTU

(with plug)

11


13/66


Valves for solar systems Code

6 118 15,38

Automatic air vent valve, G3/8", bottom connection, up to 160C, stainless steel float 8 509 23,71

Automatic air vent valve, G3/8", lateral connection, up to 160C, stainless steel float 8 528 23,71

Ball valve, G 3/8" M/F, up to 160C, under an air vent valve 7 250 10,83

Safety valve, G 1/2" F, 6bar, up to 160C, for solar systems 1 616 16,25

Air separators and accessories Code

8 510 53,75

Reducing nipple for air separator 8510 to G3/4" M/M, thick wall 8 838 3,33

Reducing nipple for air separator 8510 to G1" M/M, thick wall 8 839 6,04

Horizontal air separator, G3/4" F/F, with G3/8", connection to air vent 7 076 23,71

Horizontal air separator, G1" F/F, with G3/8", connection to air vent 7 077 25,83

Vertical air separator with G3/4" M/F vertical air vent, manually operated 6 888 62,08

Balancing valves for solar systems Code

AV23 flow regulator with indication 2-12 l/min, G3/4" F/F, 185C 7 982 107,50

AV23 flow regulator with indication 10-40 l/min, G1" F/F, 185C 8 232 111,67

AV23 flow regulator with indication 20-70 l/min, G5/4" F/F, 100C 8 022 122,08

AV23 flow regulator with indication 30-120 l /min, G6/4" F/F, 100C 8 012 152,08

Accessories to REGULUS pump groups Code

Connection valve and wall bracket for expansion vessel 7 766 22,08

Stainless-steel pipe for exp. vessel connection, 2 x 3/4"F - 0.5 m 9 156 7,46

Flow rate regulator with indication 2-12 l/min, 3/4"M 7 780 60,83

Flow rate regulator with indication 8-28 l/min, 1"M 9 593 60,83



6/4" cap nut + gasket for flow rate regulator 8 367 2,83

ST 25/7 - Wilo pump for solar systems 7 859 103,75

Automatic air vent valve, G3/8", bottom connection, up to 160C

Horizontal air separator, connection 2x Cu 22, with stainless steel strainer, G3/8F

connection to air vent

12


14/66


/ litr Code

Solarten super, 5 l packing 3,25 10 109 16,25





Code

Refractometer - for measurements of antifreeze fluid properties in solar systems 6 933 74,58

Manual filling pump for solar systems 6 898 122,92

Electric filing pump for filling solar systems from a 25l or 60l jerry can, DIN61 connect. 9 688 222,08

9 561 372,92

Antifreeze fluid for Regulus Solar Collectors.

Use of Solarten Super fluid is a pre-condition for obtaining an

extended warranty for Regulus solar collectors.

Filling push cart for solar systems, power consumption 1.1 kW. Max. volume flow 60

l/min., max. working pressure 5 bar

Accessories for handling antifreeze fluid

13

Antifreeze fluid for Regulus solar collectors.

Use of Solarten super fluid is a pre-condition for obtaining

an extended warranty for Regulus solar collectors.


15/66


Controllers for REGULUS solar systems Code

9 159 139,54

9 022 207,08

9 073 394,17

9 708 649,58

10 543 329,17

6 883 204,17

8 172 274,58

6 885 416,25

7 382 616,25

10 560 707,50

9 108 17,50

9 109 21,67

Accessories for solar controllers Code

TA52 - Outdoor temperature sensor, Pt1000, for DeltaSol M and DeltaSol MX controllers 9 110 31,25

RTA11-M - Remote control for DeltaSol M and DeltaSol MX 8 262 31,25

HKM2 - Additional module for a mixed heating circuit for DeltaSol M 8 263 227,08

9 530 11,67

1 631 66,46

9 907 74,17

VBus-USB adapter + software for Vbus controllers communication with PC 9 568 112,08

Vbus-LAN adapter + software for Vbus controllers communication with PC 9 569 87,08

VBus-RS232 adapter + software for Vbus controllers communication with PC 7 873 237,08

8 625 329,17

8 054 220,83

8 052 166,25

7 106 237,50

8 835 237,50

8 836 466,67

11 051 124,58

11 052 132,92

10 966 215,00

11 050 262,08

Final sale of accessories for solar controllers Code

RS 232 comm. cable + communication software for DeltaSol M controller 6 901 41,25

Flowmeter VFS 5-100 l/min., with integrated temperature sensor, DN 25, plastic, for

SRS4 and DeltaSol MX controllers. No moving parts.

Flowmeter VFS 10-200 l/min., with integrated temperature sensor, DN 32, plastic, for

SRS4 and DeltaSol MX controllers. No moving parts.

Flowmeter VFS 1-12 l/min., with integrated temperature sensor, DN 20, stainless steel,

for SRS4 and DeltaSol MX controllers. No moving parts.

Flowmeter VFS 2-40 l/min., with integrated temperature sensor, DN 20, stainless steel,

for SRS4 and DeltaSol MX controllers. No moving parts.

TT/S2 - Pt1000 Temperature sensor with 2m cable for solar collector and consumer

TT/P4 - Pt1000 with 4 m cable for consumer

KA 12 - Surge protector for Pt1000 temperature sensors

CS10 - Light sensor for DeltaSol ES, DeltaSol M and DeltaSol MX controllers

V40-25 - Flowmeter 50-5000 l/h, DN20 + 2 temp. sensors FRP30 and sheaths, for

DeltaSol ES, M controllers and WMZ calorimeter

V40-35 - Flowmeter 70-7000 l/h, DN25 + 2 temp. sensors FRP30 and sheaths, for

DeltaSol ES, M controllers and WMZ calorimeter

AM1 - External alarm for controllers with Vbus interface

DL2 - Datalogger, internet connectible, enables parametrization, connectible to Vbus

equipped controllers

SD3 Display for controllers with Vbus interface

WMZ calorimeter for solar systems, impulse input, Vbus interface

V40-06 - Flowmeter 12-1200 l/h, DN20 2 temp. sensors FRP30 and sheaths, for DeltaSol

ES, M controllers and WMZ calorimeter

DeltaSol BS/3

4-sensor controller, price incl. 3 PT 1000 probes

DeltaSol BS PLUS

4-sensor controller, price incl. 4 PT 1000 sensors, Vbus interface

DeltaSol ES

10-sensor controller, price incl. 6 PT 1000 probes, Vbus interface

DeltaSol M -12-sensor controller with OTC, price incl. 6 PT 1000 sensors, Vbus interface

DeltaSol MX

15-sensor controller, heating with OTC, slot for SD memory card, no sensors, Vbusinterface

STDC

3-sensor controller for 1 solar consumer, price incl. 2 PT 1000 sensors

SRS3 - 3-sensor controller for 2 solar consumers or 2 collector fields, price incl. 3 PT

1000 sensors

SRS4 - 4-sensor controller for 2 solar consumers or 2 collector fields, price incl. 4 PT

1000 sensors and electronic flowmeter for heat balance

SRS4 ethernet - 4-sensor controller for 2 solar consumers or 2 collector fields, with LAN

term., price incl. 4 PT 1000 sensors and electronic flowmeter for heat balance

SRS5 - 6-sensor controller for 3 solar consumers or 2 collector fields, price incl. 6 PT1000 sensors

14


16/66


REGULUS Solar pump stations with integrated solar controller Code

8 910 416,25

10 604 499,58

8 911 624,58

9 226 624,58

9 227 13,29

8 912 774,58

9 761 1 028,75

REGULUS FlowCon solar pump stations Code

6 886 540,83

8 173 611,25

7 765 454,17

REGULUS Solar pump stations without integrated controller Code

S1 Solar 1 Pump station, ST25/6, 2-12 l/min, 3/4" M 9 047 241,25

S1 Solar 1 Pump station, ST25/6, 8-28 l/min, 1" M 9 908 241,25

S2 Solar 3 Pump station, ST25/6, air separator, 2-12 l/min, 3/4" M 9 909 320,00

S2 Solar 3 Pump station, ST25/6, air separator, 8-28 l/min, 1" M 9 050 320,00

S2 Solar 2 Pump station, TOP-RL25/8,5, 20-70 l/min, 6/4" M 10 570 704,17

9 911 608,33S2 Solar 35 Pump station, 2-12 l/min, 3/4" 12V pump to be fed from PV panels

S2 SRS4 Pump station

twin-pipe with air separator, with integrated SRS4 controller for 2 solar storages or 2

collector fields, electronic flowmeter and 4 sensors included,

with ST 25/6 pump, 2-12 l/min, 3/4" M

S2 SRS4 Solar Pump station with Ethernet connection

FlowCon S single-pipe pump station,

incl. DeltaSol BS3 Controller and 3 temperature sensors, with ST15/6 pump, 1-13 l/min.

FlowCon S BS PLUS single-pipe pump station,

incl. DeltaSol BS PLUS Controller and 3 temperature sensors, with ST15/6 pump, 1-13

l/min.

FlowCon B two-pipe pump station,

ready for DeltaSol BS Controllers, with ST15/6 pump, 1-13 l/min.

S1 STDC Pump station

single-pipe, with integrated STDC controller for 1 solar storage and 2 sensors included,



single-pipe, with integrated SRS3 controller for 2 solar storages or 2 collector fields, 3

sensors included,



twin-pipe with air separator, with integrated SRS3 controller for 2 solar storages or 2

collector fields, with 3 sensors included,


S2 SRS3 Cu Solar Pump station

twin-pipe, with integrated SRS3 controller and 3 sensors included,

with ST 25/6 pump, 2-12 l/min, Cu22

Cu22 - Cu18 coupler + nuts (set of 4+4 pcs)

15

S2 SRS4 Solar Pump station as above (8912) with Ethernet connection


17/66

Code

Twin DN 16 stainless-steel tube, 10 m, incl . 4 nuts with crescents and rim nipple 9 916 242,50


Twin DN 16 stainless-steel tube, 50 m price per m 10 564 1 157,50

Set of 4 nuts, crescents, gaskets and 3/4" rim nipple for DN16 pipe 9 644 8,29

Crescents for 3/4" nuts for DN16 Aeroline pipes 8 802 0,38

3/4" nut for DN 16 Aeroline pipes 8 799 0,79

Rim nipple 3/4" M/M 6 970 2,08

Wall clamps for twin Aeroline DN 16 stainless-steel pipe set of 4 9 641 9,08



Twin DN 20 stainless-steel tube, 50 m price per m 10 565 1 465,83

Set of 4 nuts, crescents, gaskets and 1" rim nipple for DN 20 pipe 9 645 13,33

1 nut crescents for Aeroline DN 20 pipes 8 803 0,50

1" nut for DN 20 Aeroline pipes 8 800 1,21

Rim nipple 1" M/M 6 969 3,13

Wall clamps for twin DN 20 Aeroline stainless-steel pipe set of 4 9 646 10,33

Code

Twin pipe Cu 15x0.8, 10m incl. 14mm thick insulation and cable 9 918 299,58


G 3/4" M coupler for Cu 15 pipe 9 642 4,96

Coupler for Cu 15 pipe 9 920 1,79



G 3/4" M coupler for Cu 18 pipe 9 643 2,29

G 3/4" F coupler for Cu 18 pipe 10 166 2,29

Coupler for Cu 18 pipe 9 921 2,04

Code

insulation thickness of 13 mm on single pipes

DN12 tube (1/2" nut) in 13mm insulation, 30m packing price per 1m: 11,08 8 075 282,08


DN 20 tube (1" nut) in 13mm insulation, 30m packing price per 1m: 16,71 8 077 382,92

Code

insulation thickness of 19 mm on single pipes



DN 20 tube (1" nut) in 20mm insulation, 30m packing price per 1m: 20,46 8 080 470,00

Pre-insulated flexible stainless-steel Kombiflex pipe in Aeroflex EPDM insulation

for solar systems

2 pre-insulated flexible stainless-steel Aeroline pipes with cable in Aeroflex EPDM

insulation for solar systems with insulation surface protection.

insulation thickness of 14 mm, equals 20 mm on single pipes

2 pre-insulated copper Aeroline pipes with cable in Aeroflex EPDM insulation for

solar systems with insulation surface protection.

insulation thickness of 14 mm, equals 20 mm on single pipes

Pre-insulated flexible stainless-steel Kombiflex pipe in Aeroflex EPDM insulationfor solar systems


16


18/66


Code /m

Insulation, 13 mm thick

Insulation DNa10 140 m* 6 442 2,17



Insulation DNa18 - sold by meter 30 m 7 426 2,71


Insulation DNa 28 56 m* 6 447 3,54





Insulation DNa18, self-adhesive, cut lengthwise 48 m* 7 189 8,63







Code


Insulation DNa18 with surface protection, 1 piece=2m, price per piece 9 648 37,08



Accessories to Aeroflex Code

Aerotape insulation tape 50mm x 10m - 3mm thick 6 450 14,42

Protape insulation tape 50mm x 25m - 0.6mm thick 7 252 32,79

Insulation roll 1m wide, 13mm thick, 11m 7 418 26,25

Aerocoat black paint 0.95 l 7 253 34,83

Glue for AEROFLEX, 200g with a brush 6 452 11,92

Glue for AEROFLEX 700 g 6 451 19,08

Aeroflex insulation, EPDM rubber, for heating and solar systems, resistant to UV

radiat., DNa shows the insulation hole diam. i.e. max. outer diam. of tubes (mm)

packed in cardboard

packed in cardboard

Insulation with high resistance against mechanical damage designed for outdoor

installation on a roof

Pipe insulation is available also in 2m pieces and their multiplicationsAlso bigger sizes or board insulation can be supplied on order

price per 1m2

17


19/66


KOMBIFLEX Flexible stainless steel hoses and nuts for water and gas Code

DN 8 pipe (3/8" nut), 2m price per m: 2,23 3 713 8,92

3/8" Nut with gasket, nickel-plated brass 769 0,54


DN 12 pipe (1/2" nut) 30m roll - price per meter 4 654 6,42

1/2" Nut+gasket - nickel-plated brass 770 0,67


DN 16 pipe (3/4" nut), 30m - price per meter 4 655 8,13

3/4" Nut+gasket - nickel-plated brass 771 1,00

DN 20 pipe (1" nut), 4m price per m: 10,17 3 267 40,67

DN 20 pipe (1" nut), 30m - price per meter 4 656 10,75

1" Nut+gasket - nickel-plated brass 3 343 1,75

DN 25 pipe (5/4" nut), 20m 3 379 13,33

5/4" Nut+gasket - nickel-plated brass 3 344 3,13

Pipe cutter, DN 8 to DN 20 713 26,67

DN 8 and DN 20 clamp (3/8" + 1") 3 659 18,33

DN 12 and DN 16 clamp (1/2" + 3/4") 720 18,33

DN 10 and DN 20 clamp (1/2"eko + 1") 3 396 18,33

DN 25 clamp (5/4") 7 597 18,33

Tube template rammer, DN 8 to DN 20 (3/8" - 1") 3 430 62,08

Tube template rammer, DN 25 (5/4") 7 596 72,50

Tool case (rammer, cutter, DN12+16, 8+20 clamps, 4x10 nuts - 3/8",1/2",3/4",1") 3 834 189,58

Flexible stainless steel pipes !!for water only!! Code

DN 10 pipe (1/2" nut), economy, 4m price per m: 5,08 3 399 20,33

1/2" Nut for DN10 economic pipe with gasket - nickel-plated brass 3 398 0,58

3/4" Nut for DN12 pipe with gasket - nickel-plated brass 772 1,42

Asbestos-free gaskets for Kombiflex water and gas - 2 mm thick Code 3/8" nut gasket - 8.5x15 mm 5 667 0,17

1/2" nut gasket - 11.2x18.5 mm 5 553 0,17

3/4" nut gasket for DN 12 pipe - 13 x 24 mm 6 840 0,21

3/4" nut gasket - 15x24 mm 5 554 0,21

1" nut gasket - 18.5x30 mm 5 668 0,38

5/4" nut gasket - 25x39 mm 6 799 0,38

PTFE Gaskets for solar systems, for Kombiflex and Aeroline 2 mm Code

3/8" PTFE nut gasket - 8,5 x 15 mm 9 976 0,25

1/2" and 1/2" EKO PTFE nut gasket - 11,2 x 18,5 mm 9 977 0,29

3/4" PTFE nut gasket - 15 x 24 mm 9 978 0,33

3/4" PTFE nut gasket for DN 12 tube - 13 x 24 mm 9 979 0,33

1" PTFE nut gasket - 18,5 x 30 mm 9 980 0,50

5/4" PTFE nut gasket - 25 x 39 mm 9 981 0,71

Brass hex nipples with upsized sealing surface for Kombiflex and Aeroline Code

3/8" M/M hex nipple 6 972 0,96

3/8"-1/2" M/M hex nipple 6 968 1,38

1/2" M/M hex nipple 6 971 1,29

1/2"-3/4" M/M hex nipple 6 965 2,17

1/2"-3/4" F/M hex nipple 6 964 1,46

3/4" M/M hex nipple 6 970 2,08

1"-3/4" M/M hex nipple 6 967 4,58

1" M/M hex nipple 6 969 3,13

1"-1 1/4" M/M hex nipple 6 966 7,50

1 1/4" M/M hex nipple 6 973 7,88

18


20/66


Code

DN12 hose for gas, 750 mm long, both threads 1/2" F 10 310 19,13





DN12 hose for gas, 750 mm long, 1/2" F and M threads 10 449 22,29





Code

DN15 hose for gas, 100 - 200 mm long, 1/2" F and M threads 10 315 7,04






DN25 hose for gas, 200 - 400 mm long, 1" F and M threads 10 583 17,92

Code

10 396 13,75

10 397 18,75

Code

DN15 hose for water, 100 - 200 mm long, 1/2" F and M threads 10 349 5,38






DN25 hose for water, 100 - 200 mm long, 1" F and M threads 10 352 10,79












UNIRING - Flexible stainless-steel hoses for gas

UNIGAS Flexible extensible stainless-steel hoses for gas

DN20 hose for gas, 200 - 400 mm long, 1" F and 3/4" M threads

DN20 hose for gas, 200 - 400 mm long, 5/4" F and 3/4" M threads

UNIWATER - Flexible extensible stainless-steel hoses for water

UNICONT Flexible extensible stainless-steel hoses for gas meters

19


21/66


Ventilation with heat recovery Code

6 954 258,33

6 955 245,83

6 956 62,50

7 483 281,25

10 308 332,92

10 176 1 287,50

10 335 1 870,83

9 075 2 454,17

Square plastic pipes Code

Square plastic pipes, DN 125, 60x200, 1m 7 905 8,63

Square plastic pipes, DN 125, 60x200, 1.5m 7 906 12,75

Square coupling DN 125, 60x200mm 7 909 4,67

Elbow adapter, square to round, 60x200/125 mm 7 910 6,33

Elbow adapter, square to round, 60x200/100 mm 8 243 6,67

Square to round adapter, 125/60x200 mm 7 911 6,46

90 horizontal elbow, DN125, 60x200 mm 7 912 9,67

45 horizontal elbow, with divisible segments, 60x200mm 9 744 8,13

90 vertical elbow, DN125, 60x200 mm 8 045 6,29T-piece, DN125, 60x200 mm 7 913 12,83

Horizontal ventilation grille, 60x200mm 8 040 3,75

Round plastic pipe 100mm x 1m 8 852 5,29

Round plastic pipe 125mm x 1m 8 039 6,88

Installation accessories Code

Humidity sensor for Sentinel Kinetic 10 177 49,17

Remote control with 15m cable, for Sentinel Kinetic 10 757 80,00

Wireless boost switch for Sentinel Kinetic 10 756 92,50

Humidistat 2RV4129 - R10HY - switch-off contact, 230V 10 715 74,58

Mechanical humidistat, 35-100% RH, switch-over contact 7 570 111,67

Kit for vertical installation of AM375 Plus 8 526 112,08

Stainless-steel quick-lock hose band, 30m, in roll 9 209 29,17

Stainless-steel clamp for quick-lock hose band 9 210 0,63

Spare filter for Sentinel Kinetic 11 000 7,92

Spare textile for AM 290 filters 8 025 2,08

Spare textile for AM 375 filters 10 699 2,08

Filter textile for HR30W and HR100W 9 001 1,96

Filter textile for HR100R 8 136 1,33

Cleaning spray for heat-recovery units and ducts 10 686 14,58

Circular duct muffler DN 125, l=0.5m 11 001 40,00

Sentinel Kinetic B Plus

Central ventilation unit with heat recovery, incl. integrated control unit and summer by-

pass, max. ventilation capacity 380m3/h.

AM 375F

Central ventilation unit with heat recovery, incl. remote control, max. ventilation capacity

375m3/h

HR 100Rs - Central ventilation unit for appartment, with heat recovery, under ceiling

Sentinel Kinetic B

Central ventilation unit with heat recovery, incl. integrated control unit and summer by-

pass, max. ventilation capacity 270m3/h.

EXT 100 - for walls 280-500 mm thick

Extension for HR30W and HR100W ventilation units with heat recovery

HR 100R - Central ventilation unit for appartment, with heat recovery

HR 30W - for wall thickness up to 280 mm

Single-room ventilation unit with heat recovery

HR 100W - for wall thickness up to 280 mm

Single-room ventilation unit with heat recovery

20


22/66

Round hoses Code

Single-layer flexible hose in Al, 100mm x 5m 7 743 8,54



Thermally insulated flexible hose, 102mm x 10m 8 000 31,88




Shaped pieces Code

Male coupling, 100mm 8 854 1,17



Axial adapter, 125/100 7 896 4,42

Axial adapter, 150/125 7 897 4,33

Axial adapter, 200/150 7 904 5,63

T-piece, 100/100 7 769 7,33

T-piece, 125/100 7 721 7,88

T-piece, 125/125 7 889 7,88

T-piece, 150/100 7 890 7,92

T-piece, 150/125 7 908 8,38

T-piece, 150/150 7 891 8,75

Components Code

Butterfly valve, 100mm 7 898 11,46



Sealed butterfly valve, 100mm 7 771 8,13

Sealed butterfly valve, 125mm 10 872 9,50

Plastic disk valve, air linlet / outlet, 100mm 7 901 4,67

Plastic disk valve, air linlet / outlet, 125mm 7 902 5,17

Round plastic grille, anti-insect net, 80-125mm 9 002 2,46

Outside Al grille, diam. 125mm 7 903 5,63

Retaining spring for Al grille, 125mm diam. 8 038 1,25

Air/flue chimney, diam. 125mm 175 70,54

Pitched-roof flashing, workable Al sheet 8 014 27,00

Air warmers Code

Electric air warmer, hose mount, 0.3 kW, DN125 10 871 224,17

Electric air warmer, hose mount, 1.2 kW, DN125 9 214 225,00

Hot-water air warmer, hose mount, 1.2kW, DN200 9 215 302,50

Temperature sensor for 1.2 kW el. air warmer 7 988 41,83


21

Butterfly damper, 100mm



Sealed butterfly damper, 100mm

Sealed butterfly damper, 125mm

Air duct inlet/outlet disc valve, 100mm

Air duct inlet/outlet disc valve, 125mm

Inlet/outlet chimney, diam. 80/125mm

Electric air duct heater, 0.3 kW, DN125

Electric air duct heater, 1.2 kW, DN125

Hot-water air duct heater, 1.2kW, DN200

Temperature sensor for 1.2 kW el. air duct heater

Air heaters


23/66


Confort Section aluminum radiators Code connection pitch (mm) height (mm)

C 300 - Al section , 112 W, 300 380 7 564 12,79

C 400 - Al section , 145 W 400 480 7 565 12,96

C 500 - Al section , 174 W 500 580 7 566 13,75

C 600 - Al section , 199 W 600 680 7 567 15,00

C 800 - Al section , 248 W 800 880 7 568 18,33

Mondial Section aluminum radiators Code M 400 - Al section, 145 W 400 480 1 474 13,04

M 500 - Al section, 174 W 500 580 845 13,83

M 600 - Al section, 199 W 600 680 844 15,08

M 800 - Al section, 248 W 800 880 1 475 18,46

Rounding Section aluminum radiators Code

RO 500 - Al section, 176 W 500 578 4 001 14,67

RO 600 - Al section, 203W 600 678 4 613 16,00

RO 800 - Al section, 253 W 800 878 4 106 19,63

Accessories to Section aluminum radiators Code Nipple 1" 848 0,54

Nipple gasket - 1mm thick 851 0,25

1" Plug, right-hand thread 849 1,13

1" Plug, left-hand thread 968 1,13

Gasket under plug and reducing piece - 1,5mm thick 852 0,25

Reducing piece, 1"-1/4" left-hand thread 1 933 1,21

Reducing piece, 1"-1/4" right-hand thread 1 889 1,21

Reducing piece, 1"-1/2" right-hand thread 857 1,21

Reducing piece, 1"-1/2" left-hand thread 972 1,21


Reducing piece, 1"-3/4" left-hand thread 973 1,13

Reducing piece, 1"-3/8" left-hand thread. 971 1,21


Air vent valve, manual, 1" left-hand thread 1 079 3,33

Air vent valve, manual, 1" right-hand thread 850 3,33

Air vent valve, automatic, 1" left-hand thread 974 8,29

Air vent valve, automatic 1" right-hand thread 969 8,29

10/M Support bracket - on a wall 854 1,17

Klasik Adjustable support bracket 1 547 3,67

14/C Spanner for 1" nipple - l = 800mm 855 27,33

14/R Spanner for plug and reduction piece 858 3,96

11/B Varnish 975 5,00

12/S Retouch spray 982 10,50

22


24/66


Solartherm solar storage tank with boiler Code

10 438 3 954,17

10 439 3 995,83

9 162 4 287,50

9 225 4 329,17

Hydronic fireplaces and fireplace inset Code

10 436 1 954,17

10 615 2 402,08

10 616 2 281,25

10 617 2 272,92

Malaga W 01

Hydronic fireplace, 12 kW total oputput, 8 kW to heating water

solid sandstone

Malaga W 02

Hydronic fireplace, 12 kW total output, 8 kW to heating water

black front part and sandstone

Malaga W 03

Hydronic fireplace, 12 kW total output, 8 kW to heating water

in black front part and tiles

SOLARTHERM EL 9

250l solar storage tank with THERM El 9 el. boiler

SOLARTHERM EL 14

250l solar storage tank with THERM EL 14 el. boiler

SOLARTHERM 17 KDZ

250l solar storage tank with THERM 17 KDZ condensing gas boiler

SOLARTHERM 28 KDZ

250l solar storage tank with THERM 28 KDZ condensing gas boiler

KV 075 W 01Hydronic fireplace inset, 12 kW total output, 8 kW to heating water

23


25/66


Code

10 013 1 082,92

10 016 1 291,25

Code

10 014 1 249,58

10 015 1 457,92

Code

8 863 1 241,67

8 865 1 445,83

Code

8 864 1 366,67

8 866 1 624,58

Code

10 116 135,21

10 117 139,17

N2BC-200

200 l stainless-steel storage water heater, incl. insulation and electronic anode

tank diam. incl. insulation 600 mm, 1200 mm high

N2BC-300



Electric heating rods with thermostatic head for NBC tanks, with 5-wire cable, 2m

long. The rods are suitable for systems with solar collectors and solid-fuel boilers.

Brass head with G6/4", 1 x 230 V.

2.0 kW heating rod, 0-90C knob adjustable, stainless steel, length incl. thread 470 mm,

non-heating end 100 mm long.

3.0 kW heating rod, 0-90C knob adjustable, stainless steel, length incl. thread 350 mm,non-heating end 100 mm long.

R2GC 300/SOL2 SRS3300 l storage water heater with 2 heating coils, enameled,


Stainless-steel storage water heaters with 1 heating coil

NBC-200



NBC-300300 l stainless-steel storage water heater, incl. insulation and electronic anode


Stainless-steel storage water heaters with 2 heating coils

DHW Storage water heaters

with a sigle-pipe solar pump group with STDC controller

RGC 300/SOL1 STDC

300 l storage water heater with 1 heating coil, enameled,


R2GC 300/SOL1 STDC

300 l storage water heater with 2 heating coils, enameled,


DHW Storage water heaters

with a twin-pipe solar pump group with SRS3 controller

RGC 300/SOL2 SRS3

300 l storage water heater with 1 heating coil, enameled,


24


26/66


Code

10 493 332,92

RGC storage water heaters with 1 heating coil incl. insulation Code

RGC-200 storage water heater, 200 l, enameled, diam. 660 mm, height 1100 mm 9 031 575,00

RGC-250 storage water heater 250 l, enameled, diam. 660 mm, height 1330 mm 9 146 620,83



R2GC storage water heaters with 2 heating coils incl. insulation Code

R2GC-200 storage water heater, 200 litres, enameled, diam. 660 mm, height 1140 mm 9 059 704,17




RBC storage water heaters with 1 heating coil incl. insulation Code

RBC-200 storage water heater, 200 litres, enameled, diam. 610 mm, height 1265 mm 3 252 691,25



RBC-500 storage water heater, 500 litres, enameled, diam. 760 mm, height 1785 mm 6 480 1 075,00

RBC storage water heaters with 1 heating coil over 500 l incl. insulation Code

RBC-750 storage water heater 750 l , enameled, diam. 950 mm, height 1870 mm 4 037 2 037,50

RBC-1000 storage water heater 1000 l, enameled, diam. 950 mm, height 2120 mm 4 038 2 183,33

x 7 834 3 875,00

x 8 476 4 833,33

x 8 477 6 625,00

R2BC storage water heaters with 2 heating coils incl. insulation Code

R2BC-200 storage water heater, 200 litres, enameled, diam. 610 mm, height 1265 mm 6 481 740,83

R2BC-300 storage water heater, 300 litres, enameled, diam. 660 mm, height 1710 mm 6 482 872,50

R2BC-400 storage water heater, 400 litres, enameled, diam. 710 mm, height 1690 mm 6 483 1 037,50

R2BC-500 storage water heater, 500 litres, enameled, diam. 760 mm, height 1780 mm 6 484 1 120,83

R2BC storage water heaters with heating coils, over 500 l, incl. insul. Code

R2BC-750 storage water heater, 750 l itres, enameled, 950 mm, height 1870 mm 6 485 2 041,25

R2BC-1000 storage water heater, 1000 litres, enameled, 950 mm, height 2120 mm 5 758 2 291,67

x 8 478 4 162,50

x 8 479 5 408,33

x 8 474 7 079,17

Code

Reducing hex coupling 3/4"-1 1/4" M/M, brass, for connecting Kombiflex flexible hose 8 270 5,17

Heat exchanger coil 0.94 m2, 3/4", for RBC and R2BC, 110, l=400 mm 8 377 162,08

Heat exchanger coil 1.51 m2, 3/4", for RBC and R2BC, 110, l=700 mm 8 378 240,00

Flange for RBC, R2BC - d=170, 2 holes d=30-55 8 375 47,71

Flange for RBC, R2BC - d=170, G 1 1/2" coupling, for another electric heating rod 8 376 47,71

RBC-1500 storage water heater 1500 l, enameled, 1200 mm, height 2285 mm



R2BC-1500 storage w. heater 1500 litres, enameled, 1200 mm, h. 2285 mm



Accessories to RBC tanks

RGC-120 H storage water heater, 120 l, enamelled, connection points upwards, width x

depth 460 x 460 incl. insulation, height 1140 mm

AVAILABLE

FROM 6/2011

x - on order 25


27/66


R0BC storage tanks for DHW, incl. insulation Code

R0BC-200, 200 l storage tank, enameled, diam. 610 mm, 1265 mm high 10 586 579,17




R0BC storage tanks over 500 l for DHW, incl. insulation Code

R0BC-750, 750 l storage tank, enameled, diam. 950 mm, 1870 mm high 10 364 1 912,50

R0BC-1000, 1000 l storage tank, enameled, diam. 950 mm, 2120 mm high 10 365 2 079,17

R0BC-1500, 1500 l storage tank, enameled, diam. 1200 mm, 2285 mm high x 10 366 2 787,50

R0BC-2000, 2000 l storage tank, enameled, diam.. 1300 mm, 2550 mm high x 8 884 3 995,83



RBC HP storage water heaters for DHW, upsized heating coil, incl. insul. Code

10 534 1 079,17

10 535 1 233,33

10 536 1 454,17

8 546 1 662,50

RBC HP storage water heaters for DHW over 500 l, incl. insulation Code

10 537 2 441,67

7 883 3 020,83

Combo storage tanks for DHW in accumulation tank, incl. insulation Code

9 498 912,50

9 356 995,83

Combo storage tanks for DHW in accumul. tank, incl. detached insul. Code

7 322 1 650,00

7 323 1 829,17

7 324 1 957,50

7 325 2 495,83

x - on order

DUOE 1000/220-combo, 1000 l l total volume, 220 l DHW tank,

diam. without side ports 790 mm, 2035 mm high,

lower heating coil 2.8 m2

DUOE 1500/300-combo, 1500 l l total volume, 300 l DHW tank,

diam. without side ports 1000 mm, 2100 mm height,


RBC-1000HP, 1000 l storage water heater, enameled, diam. 940 mm, 2120 mm high.

Heating coil surface 10 m2

DUOE 380/120 G0 - combo, 380 l total volume, 120 l DHW tank

no solar heat exchanger, tank diam. 700 mm, 1890 mm high

DUOE 380/120 G1 - combo, 380 l total volume, 120 l DHW tank

with solar heat exchanger, tank diam. 700 mm, 1890 mm high

DUOE 600/150-combo, 600 l total volume, 150 l DHW tank,



DUOE 750/200-combo, 750 l total volume, 200 l DHW tank,



RBC-200HP, 200 l storage water heater, enameled, diam. 610 mm, 1265 mm high



Heating coil surface 3.8 m2





RBC-750HP, 750 l storage water heater, enameled, diam. 950 mm, 1870 mm high.


26


28/66


Code

10 579 1 832,92

10 580 1 999,58

10 581 2 207,92

10 582 2 770,42

Code

7 662 1 937,50

7 663 2 373,33

7 506 2 650,00

7 686 3 041,67

7 687 3 332,92

HSK Insulation sets - soft insulation with leatherette surface Code

Insulation for HSK 500 7 664 229,17





Accessories to HSK Code

Heat exchanger for 1"F top inlet of HSK, suitable for DHW circulation backup 8 535 120,83

LATENTO Accumulation tanks with latent material and phase shift Code

9 975 3 829,17

Wax for Latento tank - granular form, 25 kg packing 10 717 166,25

Electric heating rod 9 kW with integrated thermostat for Latento tanks 8 120 395,42

Latento BW 500 XXL - 500l accumulation tank with energy storage to "latent" material

(20 kg wax is included in supply, 25 kg wax can be added). PUR insulation, continuous

water heating in a flexible stainless steel pipe, stratification, rapid sanitary water heating

with solar collectors, easy handling.

Combo storage tanks for DHW in accumulation tank, incl. insulation, 2

heating coils

Heat accumulation tanks with stainless-steel DHW heat exchanger,

stratification cylinder

DUOE 2 600/150-combo, 600 l total volume, 150 l DHW tank,


lower heating coil 2.4 m2, upper heating coil 1.5 m

2

DUOE 2 750/200-duplex, 750 l total volume, 200 l DHW tank,



2


diam. without side ports 790 mm, 2035 mm high,lower heating coil 2.8 m

2, upper heating coil 2.4 m

2




2

HSK 500, 500 l total volume, stainless-steel DHW heat exchanger (coil) 5.7 m2

diam. without side ports 650 mm, 1720 mm high, lower heating coil 2.3 m2


diam. without side ports 790 mm, 1930 mm high, lower heating coil 3 m2, upper heating

coil 2 m2



lower heating coil 3.5 m2, upper heating coil 3 m

2




2




2

27


29/66


Heat accumulation tanks Code

PS 200, 200 l, 450 mm tank diam. without side ports, height 1440 mm, 7x G6/4" 8 458 287,08





PS 1500, 1500 l, 950 mm tank diam. without side ports, height 2340 mm, 9x G6/4" 5 858 1 120,83

PS 2000, 2000 l, 1100 mm tank diam. without side ports, height 2335 mm, 9x G6/4" 5 859 1 533,33

PS 3000, 3000 l, 1400 mm tank diam. without side ports, height 2295 mm, 9x G6/4" F x 5 860 2 550,00

PS 4000, 4000 l, 1600 mm tank diam. without side ports, 9x G6/4" F x 5 861 3 512,50

PS 5000, 5000 l, 1600 mm tank diam. without side ports, 9x G6/4" F x 5 681 3 983,33

Insulation sets - soft insulation with leatherette surface Code

Insulation for PS 200 accumulation tanks 8 531 174,58







Insulation for PS 3000 accumulation tanks x 5 864 697,50

Insulation for PS 4000 accumulation tanksw x 5 865 855,83

Insulation for PS 5000 accumulation tanks x 5 866 1 064,17

Heat accumulation tanks with two flanges Code

PS2F 300, 300 l, 550 mm diam. without side ports, 9x G6/4" F 6 267 440,83




PS2F 1500, 1500 l, 950 mm diam. without side ports, 9x G6/4" F 6 272 1 229,17

PS2F 2000, 2000 l, 1100 mm diam. without side ports, 9x G6/4" F 6 273 1 641,67

PS2F 3000, 3000 l, 1400 mm diam. without side ports, 9x G6/4" F x 6 274 2 658,33



Insulation sets - soft insulation with leatherette surface Code Insulation for PS2F 300 l accumulation tanks 6 188 206,67

Insulation for PS2F 500 l accumulation tanks 6 189 247,50





Insulation for PS2F 3000 l accumulation tanks x 6 194 712,50

Insulation for PS2F 4000 l accumulation tanks x 6 195 870,83

Insulation for PS2F 5000 l accumulation tanks x 6 196 1 079,17

Prices of PS2F and PSWF accumulation tanks do not include flanges. x - on order

Accumulation tanks up to 100m3can be supplied on request.

28


30/66


Heat accum. tanks with one heating coil and welded flange Code

PSW 200, 200 l, 450 mm without side ports, height 1440 mm, 7x G 6/4", no flange 9 163 399,17

PSWF 300, 300 l, 550 mm without side ports, height 1510 mm, 9x G6/4" 7 387 499,17




PSWF 1500, 1500 l, 950 mm without side ports, height 2340 mm, 9x G6/4" 7 391 1 437,50

PSWF 2000, 2000 l, 1100 mm without side ports, height 2335 mm, 9x G6/4" x 7 392 1 850,00




Insulation sets - soft insulation with leatherette surface Code

Insulation for PSW 200 l accumulation tanks 9 164 170,83

Insulation for PSWF 300 l accumulation tanks 7 509 206,67





Insulation for PSWF 2000 l accumulation tanks x 7 401 554,17



Insulation for PSWF 5000 l accumulation tanks x 7 404 1 079,17

Accumulation tanks up to 100m3can be supplied on request.

Brass fittings for accumulation tanks Code

Plug 6/4" 7 881 3,17

Hex nipple M-M, 6/4" x 5/4", with upsized sealing surface for 5/4" 8 767 3,92

Hex nipple M-F, 6/4" x 1" 7 882 4,13

Hex nipple M-M, 6/4" x 1", with enlarged upsized sealing surface for 1" 8 766 4,00

Hex nipple M-M, 6/4" x 6/4", with upsized sealing surface 7 627 8,13

Finned tube copper heat exchanger for flange Code

Heat exchanger 0.6 m2, d. 145x410mm, 3/4", 1 coil (for flange code 6231) 6 150 110,00




Heat exchanger 3.15 m2, d. 185x560mm, 1", 2 coils (for flange code 6232) 6 157 538,33

Heat exchanger 3.6 m2, d. 190x640mm, 1", 2 coils (for f lange code 6232) 6 155 603,75

Heat exchanger 4.5 m2, d. 190x750mm, 1", 2 coils (for f lange code 6232) 6 156 749,58

V zvorce je uveden kd pruby pro uchycen vmnku do akumulanch ndr PS2F.

Flanges for accumulation tanks Code

Blind flange - d=312, no holes 6 230 32,08

Flange for finned copper heat exchanger (code 6150 to 6154) - d=312, 2xd=30-70 6 231 38,75

Flange for finned copper heat exchanger (code 6155 to 6157) - d=312, 2xd=39-90 6 232 38,75

Flange gasket for PS2F, PSWF tanks, d=312 - spare part (gasket = part of flange) 6 732 10,63

x - on orderPrices of PS2F and PSWF accumulation tanks are without flanges. Flanges shall be ordered separately.

29

The code in brackets denotes a flange for fixing a heat exchanger into PS2F tanks.


31/66


Expansion vessels for heating systems Code

8 496 28,29

8 497 33,17

8 498 36,63

8 499 48,21

MB 35 LEGS - Expansion vessel 35 l - 3 bar, for heating systems 8 909 57,50

8 500 63,75

8 501 97,08

8 502 117,50

8 503 162,50

8 504 232,92

8 505 282,92

8 506 349,17

8 507 412,17

MB500 SKIRT - Expansion vessel 500 l - 6 bar, for heating systems 8 508 568,75

MB600 SKIRT - Expansion vessel 600 l - 6 bar, for heating systems x 8 926 729,17

MB700 SKIRT - Expansion vessel 700 l - 6 bar, for heating systems x 8 927 958,33

MB800 SKIRT - Expansion vessel 800 l - 6 bar, for heating systems x 8 928 1 208,33

MB900 SKIRT - Expansion vessel 900 l - 6 bar, for heating systems x 8 929 1 583,33

x - on request

Expansion vessels for drinking water Code

8 491 24,00

8 492 27,00

8 493 31,67

8 494 37,38

8 495 43,75

8 908 86,67

Expansion vessels for drinking water with replaceable bag Code

10 914 44,17

10 915 113,75

10 916 144,58

10 917 172,92

10 918 205,00

Expansion vessels for solar systems Code

7 405 37,04

7 406 41,63

7 407 46,67

8 627 84,17

7 462 110,83

7 463 152,92

7 464 208,13

7 617 332,92

7 618 499,58

Service valve for expansion vessels Code

8 770 20,67

7 766 22,08

9 156 7,46

Expansion vessel support Code

10 046 16,25

10 095 27,50

VVEF25 IN LINE - Expansion vessel 25 l - 10 bar

VVEF50 LEGS - Expansion vessel 50 l - 10 bar

R8 200 - Expansion vessel 200 l, 6 bar, for solar systems


3/4" Valve for expansion vessels connection and easy servicing.



Expansion vessel support, wall mounted, incl. screws and dowels

Expansion vessel support, wall mounted, incl. 3 bar safety valve, air vent valve,

manometer, screws and dowels (not assembled)






HY18 - Expansion vessel 18 l - 10 bar, for drinking water






Stainless-steel connecting pipe 2x 3/4"F - 0.5 m

Connecting valve and exp. vessel bracket for wall mount

MB300 SKIRT - Expansion vessel 300 l - 6 bar, for heating systems


HY 5 - Expansion vessel 5 l - 10 bar, for drinking water

HY 8 - Expansion vessel 8 l - 10 bar, for drinking water


MB 80 SKIRT - Expansion vessel 80 l - 6 bar, for heating systems





MB 12 IN LINE - Expansion vessel 12 l - 3 bar, for heating systems




MB 50 LEGS - Expansion vessel 50 l - 3 bar, for heating systems

IN LINE

SKIR

LEGS

30

Expansion vessels for drinking water with replaceable bladders


32/66


Electronic programmable room thermostats Code

8 180 28,33

6 298 22,04

Electronic room thermostats Code

7 355 16,58

6 299 19,13

6 295 19,13

8 269 19,13

Code

10 945 10,79

10 946 11,54

10 947 12,46

Code

10 948 11,33

Code

11 076 1,63

11 077 0,13

Final sales of Regulus room thermostats Code

6 297 16,25

Assembly accessories for TP 546 room thermostats

Base frame for TP 546, on el. backbox

Temperature limiting clip for TP 546

TP - 546 OLRoom thermostat, 230V, with ON signal lamp and switch.

Adjustable temperature 5-30C, switch-off contact 16(2.5) A max.

Mechanical thermostats for electronic circuits (300 mA max. current)

TP - 546 GCDT Room thermostat, 24 and 230V, basic version.

Adjustable temperature 5-30C, switch-off contact 20-300 mA.

TP01 - Regulusweekly programmable digital thermostat,

2 adjustable temperatures 5-30C in 10 min. steps, Mo-Fr, Sat, Sun, 2x 1.5 V (AAA)

included, 8(2)A/230 V.

TZ33 - Regulus, plug-in thermostat, LCD display (thermometer function), LED,

5-35C adjustable temperature, 16(3) A 230V.

TZT63 - Regulus, plug-in thermostat, LCD display (thermometr function), LED. Manual

timer for adjustable time period. 5-35C adjustable temperature, 16(3) A 230 V.

Mechanical thermostats for current appliances (250 mA min. current)

TP - 546 DTRoom thermostat, 230V, basic version.


TP - 546 LARoom thermostat, 230V, with ON signal lamp.


Regulus room thermostats

TP07- Regulus weekly programmable digital thermostat,

4 temperature changes a day, 7 days a week or Mo-Fr/Sa-Su setting, function of

intelligent preheating, 2 x 1.5V (AA), 5A/230V contact.

TP08- Regulusweekly programmable digital thermostat,

8+7 weekly programs, 2 temperature settings 5-30C in 1 hour step, 2 x 1.5 V (AAA)included, 8(2)A/230 V contacts.

TP18 - Regulus, LCD display (thermometer function),

5-35C adjustable temperature, 2 x 1.5V (AAA), 5(3.5) A 24...230V.

TP39 - Regulus, electronic LCD display (thermometer function), 5-35C adjustable

temperature, 16(3) A 230V.

31


33/66


REGULUS IR Intelligent controllers Code

6 539 706,25

8 832 812,0

Documents

Cenik Cerven 2011 A4 ENG Pro WEB