Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
CEN SFGas WG
pre-normative study
on gas quality parameters
Brussels, 16/11/2016
ENTSOG workshop
Current situation
29th MF – Conclusion on GQ (10/2016)
2
European H-gas quality harmonisation
CEN approach
3
1. Pre-normative phase in a common WG of the CEN
Sector Forum Gas (Infrastructure and Utilization):
Fact based study on Wobbe index aspects and - if
justified and agreed in SFGas WG – on other gas quality
parameters.
2. Normative phase within CEN/TC 234 WG 11:
Revision of EN 16726:2015 on the basis of the
pre-normative study results.
European H-gas quality harmonisation
Scope of SFGas WG
4
Scope of WG : Study of impact of identified values of H-
gas quality parameters not yet or insufficiently
established in EN16726:2015 on the whole gas supply
chain on the basis of technical and fact based findings
with the purpose of supplying information and
recommendations on the parameters in question to
CEN/TC 234 in view of the future revision of EN
16726:2015.
5
SFGas WG pre-normative H-GQ Study
General structure of SFGas WG
SFGas
Infrastructure
SFGas
Utilization
WG pre-normative study
on H-gas quality
TF 1
Wobbe
index
TF 2
National/
sectorial
situations
AHG
Units/Definitions …
Chair Advisory
Group
…
DG
JRC
European Association
C
European Association
B
European Association
A
European Association
…
Chair: Kris de Wit, NBN/ARGB
Secretary: Hiltrud Schülken, DIN/DVGW
SFGas WG pre-normative H-GQ Study
Participation of stakeholders
6
AENOR (E) SIS (S)
AFNOR (F) UNI (I)
ASI (A)
[BSI (UK)]
DIN (G)
DS (DK)
ELOT (GR)
NBN (B)
NEN (NL)
NSAI (IRL)
MSZT (HU)
PKN (PL)
Afecor GIE
CECOF IFIEC
C.E.F.A.C.D. IOGP
CEFIC Marcogaz
EASEE-gas NGVA Europe
EHI
ELVHIS
ENTSOG
EURO-AIR
Euromot
EUTurbines
FARECOGAZ
Nomination by NSB: Nominations by Associations:
7
Possible input of European associations in
combination with national mirror committees
European
associations CEN SFGas WG
National mirror
committees –
representing whole chain
CAG
AdG
Units/Definitions
TF 1 Wobbe
TF 2 Situations
SFGas WG pre-normative H-GQ Study
Timeline SFGas
8
• Definition Wobbe Index Scenarios (TF1: range, fluctuation and fluctuation rate, ...)
• Data enquiries (TF2: national/sectorial GQ data, …)
• Common understanding (AhG + TF 1: units and definitions
incl. safety and reliability)
• Application of cases using:
the enquired data and
data from sectorial/national studies
• Further data enquiries, if needed
• Objective analysis of the assessment results
• Deducing consensus based recommendations for
standardisation in normative phase
Preparation
phase
Evaluation
phase
EN 16726
Assessment
phase
• Revision according to CEN Rules
3rd
year
2n
d y
ear
1st
year
+
Other GQ parameters (besides WI)
SFGas WG GQS postpones the decision whether further
GQ parameter should be treated in the CEN SFGas pre-
normative study until the results of the ENTSOG study
and other relevant studies, carried out in parallel to the
ENTSOG process, are available and analized.
Furthermore, the WG agrees to focus the ressources on
the Wobbe Index aspects at the time being, as it is
expected that the same experts would be involved in the
work on other GQ parameters, too.
11
CEN SFGas WG GQS – Conclusions
(1)
• Adoption • European Parliament on 20.01.2016
• Council on 12.02.2016
• Signature on 09.03.2016
• OJEU L 81 of 31.03.2016
• Entering into force on 21.04.2016
• Application from 21.04.2018
• Exceptions: • Articles 4, 19 to 35 and 42 and Annex II
apply from 21.10.2016
• Article 43(1) applies 21.03.2018
Regulation (EU) 2016/426 on appliances burning gaseous fuels (GAR)
Reference conditions (a)
As a CEN committee acknowledging the use of different reference
conditions and respecting EC mandate M/400, EN ISO 13443 and EN
16726:2015, the following reference conditions apply:
For easy comparison, all contributed data have to be delivered with
clear indication of these reference conditions. Also in case other
reference conditions are originally in the documents, the values
converted to the agreed reference conditions have to be indicated in
addition. […]
14
CEN SFGas WG GQS – Conclusions
(2)
Combustion temperature 15°C (= 288,15 K)
Volume measurement temperature 15°C (= 288,15 K)
Reference pressure 1013.25 hPa (= 101,325 KPa)
Reference conditions (b)
(…) For all contributed data reference conditions have to be indicated
expressively by units in brackets, eg, . xxx [MJ/m³, 15°C/15°C] in order
to avoid any confusion in discussions and documentations.
To switch from one set of reference conditions to another, the
table given below, basing on EN ISO 13443, gives multiplying
Coefficients:
(The reference conditions have to be indicated expressively even if the
agreed ISO reference conditions (15°/15°) are used. )
15
CEN SFGas WG GQS – Conclusions
(2)
Reference temperature
(combustion volume)
25/20 to
15/15
25/0 to
15/15
0/0 to
15/15
Wobbe Index (for real gas) 1,018 5 0,948 7 0,946 1
16
…in the CEN Gas Quality Study!