CEG ConExpo 2008

Page 2 • March 11-15, 2008 • www.cegltd.com • 2008 ConExpo Special • Construction Equipment Guide

MAIN OFFICE PO BOX 669 300 SOUTH RANDOLPHVILLE ROAD, PISCATAWAY, NJ 08855-0669BRANCH OFFICE 22 PECONIC AVENUE, MEDFORD, LONG ISLAND, NY 11763

SOUTHERN NJ BRANCH OFFICE 2610 SOUTH BLACKHORSE PIKE, WILLIAMSTOWN, NJ 08094BRONX BRANCH OFFICE 1130 ZEREGA AVE, BRONX, NY 10460

(732)752-3600 • WWW.HOFFMANEQUIP.COM

HOFFMAN EQUIPMENT IS YOUR #1 SOURCE FOR EQUIPMENT RENTALS.WE CARRY A FULL LINE OF EXCAVATORS EQUIPPED FOR DEMOLITION AND SCRAP PROCESSING APPLICATIONS.

WE CARRYTHE FULLLINE OF

ATLASCOPCOHYDRAULIC HAMMERS &DEMOLITION

TOOLS

THE ATTACHMENT SPECIALISTSSERVING NY, NJ, PHILADELPHIA & LI.SERVING NY, NJ, PHILADELPHIA & LI.

TOGETHER

HOFFMAN &GENESISARE TURNING THE INDUSTRY

UPSIDEDOWNWITH THE

LXP LOGIX PROCESSOR

#1 Genesis Dealer In the Nation!#1 Source for Genesis Products in the Philadelphia, NJ and NY Market.

Construction Equipment Guide • 2008 ConExpo Special • www.cegltd.com • March 11-15, 2008 • Page 3

HOME USED PARTS EMPLOYMENT MAPSQuick Link to...

USED EQUIPMENT

1999 CAT 773D $546,000S/N 07CS00092, ID# UP9747N, SMU 6093, OFF HIGHWAY TRUCK, CAT 3412EENGINE, CAB W/AIR, HEATED & LINED DUAL SLOPE BODY, RETARDER, TRAC-TION CONTROL, TIRES 2400R35 @ 6040 HOURS, FRONTS 75% REARS 20%

2002 CAT 773E $553,000S/N 0BDA00120, ID# UP9947N, SMU 8830, OFF HIGHWAY TRUCK, CAB W/AIR, HISPEED OIL CHANGE, BODY LINER, DUAL SLOPE BODY /HEATED BODY, FUELSYSTEM, TRACTION AID GROUP, TIRES 2400R35 FRONT 85% BS, REAR ALL 70%MICH @ 8829

1997 CAT D8R LRC $205,000S/N 07XM01434, ID# UP8897NR, SMU 3865, TRACTOR, CAT 3406 ENGINE, CABW/ROPS MTD A/C, WOODCHIP ARRANGEMENT, SU BLADE, DRAWBAR ON BACK,U/C AT 3060 ON METER 60+%, 26IN SHOES, REPAIRS: AT 20,000 HOURS,REPLACED ENGINE ROD/MAIN BEARINGS, REBUILT TRANSMISSION

2004 CAT D6R LGP $210,000S/N 0ADE00464, ID# UT9784BN, SMU 7771, DS TRACTOR, CAT C9 DIESELENGINE, CAB W/AIR, S TILT 13FT BLADE, WIRED FOR GPS SYSTEM, WASTEHANDLER W/FLEX AIR FAN, RIPPER HYD CONTROL LINES TO REAR, OILCHANGE SYSTEM, REAR STRIKER BARS, UC 85% AT 7764 HOURS 36IN TRACK

1998 CAT IT28G $81,600S/N 08CR00866, ID# UP8197N, SMU 6052, WHEEL LOADER, CAT 3116ENGINE, CAB W/AIR, STEERING WHEEL, 20.5R25 TIRES @ 6049 HRS50%, THIRD VALVE HYD, GP BKT 2.25 CUYD BOCE. FB308

2003 CAT 980G II $265,000S/N 0AWH00842, ID# UP8483N, SMU 7094, WHEEL LOADER, CAT 3406E ENGINE, CABW/AIR, RIDE CONTROL, STEERING WHEEL, RADIO READY, POWER TRANSMISSION,OIL COOLER, TIRES 70% @ 7093 HOURS, REPAIRS: NEW DRIVE SHAFT @ 5680 HRS

1998 CAT 938G $86,700S/N 06WS00463, ID# UT9860N, SMU 10235, WHEEL LOADER, EROPS, AIRCONDITIONING, GP BUCKET W/EDGE, RIDE CONTROL, WHEEL STEERING,ETHER STARTING AID, HYDRAULIC OIL COOLER, THIRD VALVEHYDRAULICS, TIRES @ 9953 HOURS, 20.5R25 GOODYEAR ALL @ 50%

2002 CAT 315CL $85,000S/N 0CFT01212, ID# UT8274N, SMU 3594, HYDRAULIC EXCAVATOR, CAT 3046ENGINE, CAB W/AIR, HAND CONTROL PATTERN CHANGER, HAMMER CIRCUIT,8FT 6IN STICK, U/C @ 3195 HRS, LINKS 85%, P&B 80%, SHOES 85%, IDLERS85%, SPROCKETS 85%, ROLLERS 80%, CARRIER 85%, 24IN TG SHOES

1996 CAT 330BL $68,000S/N 06DR00605, ID# UT9695N, SMU 15859, HYDRAULIC EXCAVATOR, CAT 3306ENGINE, CAB W/AIR, 21FT 4IN BOOM, 10FT 10IN STICK, ECM SYSTEM, D FAMI-LY BUCKET LINKAGE, CAT UC W/8 ROLLERS @ 15569 HOURS, LINKS 50%,P&B 60% NOT TURNED, 34IN SHOES 85%, IDLERS 50%, SPROCKETS 50%

1999 HITACHI EX270 $77,000S/N 15JP010529, ID# UT9853, SMU 10984, HYD EXCAVATOR, ROPS CAB W/AIR, LEMAC HYDQUICK COUPLER, 42IN BKT, AUTOLUBE SYSTEM , PLUMBED, U/C @ 10980 HRS, BUSHINGS50% NOT TURNED, 18IN SHOES 85%, RAILS 30%, SEGMENTS, IDLERS & ROLLERS 45%

Find Our Complete Inventory With Detailed Descriptions & Photos on:

www.clevelandbrothers.com

For More Information Call Our Used Equipment Department:

(866) 532-9023 • In Canada Call (877) 890-4900

Renee Hill(724) 325-9447, Pittsburgh, PA

Asst. Used Equip. Manager,Western Region

[email protected]

Steve Culbertson(304) 641-0083, Clarksburg, WV

Asst. Used Equip. Manager,Eastern Region

[email protected]

Thomas Longe(814) 553-0953, Clearfield, PA

Sales and [email protected]

Duane Phillips(412) 877-3549, Pittsburgh, PA

Sales and [email protected]

1996 CAT 769D $240,000S/N 05TR00404, ID# UT9645N, SMU 23625, OFF HIGHWAY TRUCK, CAT 3408E ENGINE, CAB W/AIR, PAY-LOAD MEASUREMENT SYS, AUTO LUBE, RETARDER, LINERS, 1800R33 TIRES 25%-50% @ 23609 HRS,REPAIRS: NEW ENGINE @ 22300 HRS, REBUILT TORQUE @ 22300 HOURS, REBUILT DIFFS @ 20000 HR

When You Buy EquipmentFrom Cleveland Brothers,

You’re Buying More Than Just Iron!

1989 CAT D9N $253,000S/N 01JD01878, ID# UP10118N, SMU 21637, TRACK TYPE TRACTOR, CAT3408 ENGINE, CAB W/AIR, SU BLADE W/TILT, MS RIPPER, ENGINE ENCLO-SURES, STARTING SYSTEM, FAST FUEL & OIL CHANGE SYSTEMS, U/C 80%@ 10899 METER HOURS, 24IN SHOES, REBUILT TRANS @ 1280 METER HRS


Contact:

Corporate Headquarters:

Long Island Branch:

Connecticut Branch:

New York City

DENOTES KOMATSU CERTIFIED REMARKETING USED MACHINE DEPENDING ON CERTIFIED GRADE, UNIT MAY QUALIFY FOR SPECIAL FINANCING RATE AND/OR MANUFACTURERSUPPORTED WARRANTY. PLEASE CONTACT US FOR ADDITIONAL DETAILS ON THESE OR ANY OF THE ABOVE MENTIONED USED PIECES.

K O M AT S UREMARKETING MACHINES...

A BEST BUY!

PRODUCT SUPPORTIT REALLY MATTERS

•••• Representing TheseFine Lines of Equipment:

• WIRTGEN • VOGELE • HAMM • FUCHS • NPK• E.D. ETNYRE • METSO MINERALS • JRB

• ROGERS BROS • ESCO • LA BOUNTY• KOMATSU • FELLING • MAULDIN

not al l manufacturers represented in al l areas served

Hank RutturaHolbrook, NY Office631-563-7600

4 Executive Plaza, Yonkers, NY 10701 914-738-5100 (PH)914-738-6847 (FX)

601 Coates Avenue, Holbrook, NY 11741 631-563-7600 (PH)

42 Kenosia Avenue, Danbury, CT 203-743-0088 (PH)

4 Executive Plaza, Yonkers, NY10701 718-626-3331 (PH)

www.ehrbar.com

••

$5,900 #20265

PUCKETT BROS T650BTRACK PAVER

VH4D DIESEL; 9’ MAIN POWER BOX; MANUAL CROWN; ON-OFF MATCONTROL; GOOD WORKING MACHINE

$6,500 #20516

1999 DYNAWELD20 TON TAG TRAILER

8 1⁄2’ X 19’ FLAT DECK; 5’ BEAVER TAIL; ABS AIRBRAKES; TOOL BOX

$139,000 #19341

2002 KOMATSU WA450-5LWHEEL LOADER

KM SAA6D125E-2 DIESEL; ENC CAB W/ A.C./HTR/DEF; 125” GP BKT W/BOCE;26.5-R25 XHAT*(L3) MICHELINS; 2 SPOOL VALVE

$23,000

2001 KOMATSU PC40MR-1MINI-EXCAVATOR

CUSTOMER-OWNED: CAB w/HEATER; LONG ARM w/PIPING; COUPLER; 2BUCKETS; 2,100 HOURS

$45,000 #20497

KOMATSU PC150LC-6HYDRAULIC EXCAVATOR

KM SA4D102E-2 DIESEL; ENC CAB w/HTR; 16’11” ONE-PIECE BOOM; 9’6” ARM; HYDCPLR; 36” BKT w/SIDE CUTTERS; 27.6” TRIPLE GROUSER SHOES; AUX.

HYD CONTROL VALVE

$7,500 #20338

PUCKETT BROS T650BDTRACK PAVER

LOMBARDINI 3-CYLINDER DIESEL; 9’ MAIN POWERBOX; MANUAL CROWN; ON/OFF MAT KONTROL; GOOD WORKING CONDITION

$59,000 #20348

1999 KOMATSU WA420-3MCWHEEL LOADER

KM SAA6D114E-1 6-CYL DIESEL; EROPS W/HTR/AC/DEF/PRESS;26.5R25 MICHELIN RADIALS; 118”/4.8 CY GP W/BOCE; 3 SPOOL VALVE; ADD’L CTWT;

P/S TRANS; 4 SPDS F/R

$49,000 #19615

1995 KOMATSU PC220LC-6HYDRAULIC EXCAVATOR

KM SA6D95L-1 DIESEL; ENC. CAB; 19’ 4” BOOM; 10’ 0” ARM; 31.5” TRIPLEGROUSER SHOES; GEITH 42” 1.5 CY BKT; GOOD CONDITION FOR AGE & HRS

Your one-stopsource for

VogeleWirtgenHamm

••

CallTodayCall

Today

Your one-stopsource for

Plus Other Fine Linesof Used Paving and

Construction Equipment

Check Out These Great Ehrbar Deals!

• Asphalt Pavers• Milling – Cold Recycle

• Soil – Asphalt Compactors


ALBAN TRACTOR CO. INC.www.albancat.comCall 800-492-6994

John Alexander

2002 CAT 330CL,S/N DKY00231,9000 Hrs$109,000

1997 CAT PM465,S/N 5ZS00124,4617 HrsCALL

2004 CAT AP-800C,S/N 01PM00798,2582 Hrs$122,500

2002 CAT 953C,S/N 2ZN04861,6507 Hrs$118,000

2005 CAT 815F, S/N BKL00688,1390 Hrs$288,000

1997 CAT 345BL,S/N 4SS00439,15690 HrsCALL

1997 CAT D5M,S/N 6GN00684,10883 HrsCALL

2003 CAT 963CWHA, S/N2DS01938, 7125 Hrs$167,500

2001 CAT 963C, S/N 2DS01396,9006 Hrs$56,500

TRACK TYPE TRACTORS2005 CAT D8T, S/N 0KPZ00701, 2107 Hrs ................................$498,0002006 CAT D5G XL, S/N WGB03343, 66 Hrs...............................$108,0002006 CAT D4G XL, S/N HYD01706, 289 Hrs................................$88,0002003 CAT D4G XL, S/N CFN00857, 1183 Hrs ..............................$68,0001990 CASE 550, S/N JAK0013891, 5193 Hrs...................................CALL1986 JOHN DEERE 450E, S/N TO450EW727820, 8684 Hrs........$19,000TRACK LOADERS2001 CAT 963C, S/N 2DS01565, 9792 Hrs ..................................$56,0002001 CAT 963C, S/N 2DS02113, 9286 Hrs ..................................$56,5002002 CAT 963C, S/N 2DS02308, 8595 Hrs ..................................$58,8252003 CAT 963C, S/N 2DS02803, 7403 Hrs ..................................$82,4002003 CAT 963C, S/N 2DS02923, 7643 Hrs ..................................$98,8502003 CAT 963C, S/N 2DS02955, 6396 Hrs ..................................$82,4002003 CAT 963C, S/N 2DS02966, 6199 Hrs ..................................$82,4001999 CAT 963C, S/N 2DS00447, 13579 Hrs ................................$69,0001999 CAT 963C, S/N 2DS00679, 12892 Hrs ................................$69,0001999 CAT 963C, S/N 2DS00680, 13484 Hrs ................................$69,0001999 CAT 963C, S/N 2DS00681, 14484 Hrs ................................$69,0001999 CAT 963C, S/N 2DS00686, 13462 Hrs ................................$69,0001999 CAT 963C, S/N 2DS00688, 14435 Hrs ................................$78,5001995 CAT 963B, S/N 9BL00774, 10118 Hrs.................................$53,5001997 CAT 963B, S/N 9BL02231, 13223 Hrs.................................$42,0001998 CAT 963B, S/N 9BL02509, 13769 Hrs.................................$42,0002001 CAT 953C, S/N 2ZN04671, 7100 Hrs ..................................$79,0002003 CAT 953C WHA, S/N 2ZN05394, 4642 Hrs..............................CALL1994 CAT 953B, S/N 5MK01545, 4507 Hrs .................................$46,0001989 CAT 953 LGP, S/N 20Z02755, 15732 Hrs............................$27,500WHEEL LOADERS2004 CAT 928G, S/N DJD00868, 1423 Hrs................................$119,0001999 CAT 924F, S/N 5NN01538, 5596 Hrs .......................................CALL

MOTOR GRADERS1971 562B, S/N 67562B10272387, 2574 Hrs................................$6,200EXCAVATORS2004 CAT 365BL II, S/N 0DER00226, 3318 Hrs ........................$388,0002001 CAT 345BL II, S/N AGS00548, 9614 Hrs ..........................$137,0002006 CAT 325CL CR, S/N BKW00410, 1296 Hrs .......................$242,0002001 CAT 322CL, S/N 0BKJ00459, 4291 Hrs ............................$130,0002005 CAT 320CL, S/N PAB04392, 1988 Hrs ..............................$121,0002000 CAT 315BL, S/N 3AW02120, 6743 Hrs ...............................$46,0002005 CAT 307C SB, S/N BNE00939, 641 Hrs...............................$77,0001982 HITACHI UH122, S/N 171-0918, 0 Hrs..................................$7,0002004 JCB 8032ZTS, S/N SLP080324E08996, 700 Hrs ................$24,0002004 JOHN DEERE 80C, S/N FF080CX01183, 2581 Hrs ..................CALL2000 JOHN DEERE 330LC, S/N FF0330X080615, 11101 Hrs......$41,9002002 JOHN DEERE 330CLC, S/N FF330CX082148, 7827 Hrs .....$70,6002002 JOHN DEERE 330CLC, S/N FF330CX082159, 8488 Hrs .....$70,9502003 KOMATSU PC228LC-3, S/N 21233, 7804 Hrs ....................$56,0002005 KOMATSU PC160LC-7, S/N KMPTC047V55K410, 925 Hrs$74,5002005 VERMEER CX224, S/N 1VRY100P6530001, 994 Hrs .........$17,000ARTICULATED DUMP TRUCKS1997 VOLVO A30C, S/N A30CV2539, 5976 Hrs...........................$64,7501998 VOLVO A30C, S/N A30CV60056, 12178 Hrs.......................$76,5001998 VOLVO A30C, S/N A30CV60057, 11411 Hrs.......................$64,7002000 VOLVO A30C, S/N A30CV60296, 12609 Hrs.......................$77,650BACKHOE LOADERS2006 CAT 430D, S/N BML05472, 609 Hrs ...................................$81,0001999 CAT 426C, S/N 6XN04085, 4091 Hrs ..................................$29,0002007 CAT 416E, S/N SHA02178, 88 Hrs ......................................$87,0002002 CAT 416D, S/N BFP06141, 2092 Hrs ..................................$42,0002004 CAT 416D, S/N BFP13581, 1938 Hrs ..................................$47,0002006 CAT 416D, S/N BFP17053, 547 Hrs ....................................$54,000

2006 CAT 416D, S/N BFP17054, 921 Hrs ....................................$54,0002006 CAT 416D, S/N BFP17055, 846 Hrs ....................................$54,0002006 CAT 416D, S/N BFP17056, 759 Hrs ....................................$54,0002006 CAT 416D, S/N BFP17057, 717 Hrs ....................................$54,0002006 CAT 416D, S/N BFP17058, 707 Hrs ....................................$54,0002006 CAT 416D, S/N BFP17059, 914 Hrs ....................................$54,0002006 CAT 416D, S/N BFP17060, 514 Hrs ....................................$54,0002006 CAT 416D, S/N BFP17061, 624 Hrs ....................................$54,0002006 CAT 416D, S/N BFP17062, 880 Hrs ....................................$54,0002006 CAT 416D, S/N BFP17063, 781 Hrs ....................................$54,0002006 CAT 416D, S/N BFP17064, 1348 Hrs ..................................$54,000WHEEL EXCAVATORS2003 CAT M322C, S/N BDK00129, 6901 Hrs.............................$131,000VIBRATORY COMPACTORS2004 INGERSOLL RAND SD77F, S/N 175390, 809 Hrs...............$47,100SKID STEER LOADERS2007 CAT 287B, S/N ZSA04441, 641 Hrs ....................................$49,0002005 CAT 277B, S/N MDH02964, 487 Hrs...................................$35,0002006 CAT 257B, S/N SLK05585, 713 Hrs ....................................$28,0002007 CAT 257B, S/N SLK06030, 880 Hrs ....................................$30,0002004 CAT 257, S/N CMM02075, 885 Hrs.....................................$24,0002003 CAT 257, S/N CMM00998, 2017 Hrs...................................$23,0002004 CAT 247B, S/N MTL00522, 1749 Hrs..................................$23,0002004 CAT 246B, S/N PAT01101, 2741 Hrs...................................$30,0002003 CAT 242, S/N CMB01094, 655 Hrs......................................$24,0002003 CAT 242, S/N CMB01096, 787 Hrs......................................$24,0002003 CAT 242, S/N CMB01196, 819 Hrs......................................$24,0002003 CAT 242, S/N CMB01198, 767 Hrs......................................$24,0002006 CAT 216B, S/N RLL04969, 56 Hrs ......................................$17,0002006 MUSTANG 2086, S/N MMC02086E000033, 357 Hrs..........$18,800

visit our website to view the complete, updated listing of our used equipment


www.pbeinc.com www.eastpbe.com

(800) 631-4707 • (845) 744-200697 Route 302 • Pine Bush, NY 12566

24 Sybil Ct. • Holmes, NY 12531

(860) 665-7470283 Pane Rd. • Newington, CT 06111

11999977 BBOOBBCCAATT 777733,, STK# S00327C, 66" BUCKET,GOOD TIRES, 1429 HRS, Call East PBE! ........$$1111,,000000

22000055 KKUUBBOOTTAA KKXX112211--33,, STK# E00453C, 1011 HRS,CAB W/AC, STEEL TRACKS, COUPLER, 18", 24" & 36"BKTS, AUX. HYD. WELL MAINTAINED, Call East PBE!..........................................................................$$3366,,000000

11998877 CCAATT DD44HH,, STK# D00505C, CAB, 6-WAY BLADE,GOOD UNDERCARRIAGE, WELL MAINTAINED, CallEast PBE!..........................................................$$2288,,000000

BACKHOE LOADERS22000033 CCAASSEE 559900SSMM,, STK# B13219, 4830 HRS, BACKHOE, CALL PINE BUSH!..............................................................................................................$$5511,,55000011999977 CCAASSEE 558800SSLL,, STK# B13111, 3630 HRS, BACKHOE EXTENDAHOE 4X4,CALL PINE BUSH! ................................................................................$$3300,,55000022000011 CCAASSEE 558800MM,, 4X4, EXTENDAHOE, CAB, CALL PINE BUSH!........$$4444,,99000011999977 CCAASSEE 558800SSLL,, STK# B00380, 4700 HRS, 4X4, EXTENDAHOE, CALLPINE BUSH! ..........................................................................................$$2233,,990000

CRAWLER DOZERS11998888 DDRREESSSSEERR TTDD2200--GG,, CAB/AIR/NEW MOTOR PUMP, CALL PINE BUSH! .................................................................................................................$$4455,,00000011999977 CCAASSEE 11115500GG,, STK# D00261, 5182 HRS, DOZER, CALL PINE BUSH! ...................................................................................................................$$4455,,00000011999999 KKOOMMAATTSSUU DD4411EE--66YY,, STK# D00376, 6-WAY BLADE, OPEN ROPS, CALLPINE BUSH! ..........................................................................................$$3399,,000000KKOOMMAATTSSUU DD4411SS--33,, 3953 HRS, NEW TRACKS, PADS, SPROCKETS, CALLPINE BUSH! ..........................................................................................$$1155,,00000022000022 KKOOMMAATTSSUU DD3311EEXX--2211,, STK# D11697C, 1450 HRS, HYD. TRANS, 6-WAYBLADE, ROPS CANOPY, D.O.R.F., CALL EAST PBE! ............................$$3399,,00000022000022 KKOOMMAATTSSUU DD3377EEXX--2211,, STK# D11604C, 1432 HRS, HYD. TRANS, 6-WAYBLADE, ROPS CANOPY, D.O.R.F., CALL EAST PBE! ............................$$4488,,00000022000000 DDEEEERREE 445500HH,, STK# D00387, 2150 HRS, DOZER, CALL PINE BUSH! ...................................................................................................................$$3344,,55000011999944 KKOOMMAATTSSUU DD6655EEXX--1122,, STK# D00595, DOZER, CALL PINE BUSH! ........................................................................................................................$$4455,,00000011998877 CCAATT DD44HH,, STK# D00505C, CAB, 6-WAY BLADE, GOOD U/C, WELLMAINTAINED, CALL EAST PBE!...........................................................$$2288,,000000

EXCAVATORS11999999 KKOOMMAATTSSUU PPCC115500LLCC--66KK,, STK# E13289, 6200 HRS,EXCAVATOR/THUMB, CALL PINE BUSH!..............................................$$5555,,00000022000022 KKOOMMAATTSSUU PPCC115500LLCC--66,, STK# E13302, 4600 HRS, EXCAVATOR, CALLPINE BUSH! ..........................................................................................$$6633,,00000022000033 KKOOMMAATTSSUU PPCC112200--66,, STK# E2385C, 1398 HRS, 27,000 LBS, AC, 20"PADS, CALL EAST PBE! .......................................................................$$6699,,00000022000055 KKOOMMAATTSSUU PPCC330000LLCC--77,, STK# E2497C, A/C, 13' ARM, 4140 HRS, 48"BUCKET, GREAT SHAPE, CALL EAST PBE! ........................................$$116622,,00000022000055 KKOOMMAATTSSUU PPCC7788--MMRR66,, STK# E00398, EXCAVATOR, CALL PINE BUSH! ................................................................................................................$$5599,,00000022000033 KKOOMMAATTSSUU PPCC220000LLCC--77,, STK# E00333C, 2225 HRS, 42" BUCKET, CLEANMACHINE, CALL EAST PBE! ................................................................$$8833,,000000DDRREESSSSEERR 66220000LLCC,, 9251 HRS, GOOD CONDITION, VERY CLEAN, CALL PINEBUSH! ..................................................................................................$$3355,,00000022000066 CCAATT 331155CC,, STK# E00720, COUPLER, AUX HYDRAULICS, CALL PINEBUSH! ................................................................................................$$110055,,000000

WHEEL LOADERS22000055 KKOOMMAATTSSUU WWAA220000--55LL,, STK# W2512C, 5400 HRS, 2.5 YD BKT, JRBCOUPLER, NEW TIRES, EXCELLENT CONDITION, CALL EAST PBE! ..$$8855,,000000

SKID STEERS22000033 CCAATT 225577,, 859 HRS, RUBBER TRACKS, CALL PINE BUSH! .........$$2233,,00000022000055 KKOOMMAATTSSUU SSKK771144--55,, STK# L30147C, 592 HRS, OROPS, PATTERNCHANGE VALVE, 61" BKT W/BOCE, 1350 LB LIFT, D.O.R.F., CALL EAST PBE! ................................................................................................................$$1166,,00000011999977 BBOOBBCCAATT 777733,, STK# S00327C, 1429 HRS, 66” BUCKET, GOOD TIRES,CALL EAST PBE!...................................................................................$$1111,,000000

LIGHT EXCAVATORS22000044 KKOOMMAATTSSUU PPCC3355,, STK# L33251, 2550 HRS, CAB, ROAD LINERS, BKT &BLADE, CALL PINE BUSH!....................................................................$$3311,,00000022000055 KKUUBBOOTTAA KKXX112211--33RRAA,, STK# L33671, 1361 HRS, EXCAVATOR, CALLPINE BUSH! ..........................................................................................$$3388,,00000022000055 KKUUBBOOTTAA KKXX112211--33RRAA,, STK# L33673, EXCAVATOR, CALL PINE BUSH! ..................................................................................................................$$3388,,00000022000055 VVOOLLVVOO EECCRR8888,, STK# L33370, EXCAVATOR, CALL PINE BUSH! .$$6699,,00000022000066 KKUUBBOOTTAA KKXX4411,, STK# L33770, EXCAVATOR, CALL PINE BUSH! .$$2200,,55000022000011 KKUUBBOOTTAA KKXX4411--22,, STK# E00339, EXCAVATOR, CALL PINE BUSH! .........................................................................................................................$$1133,,00000022000055 KKUUBBOOTTAA KKXX116611--33RR44,, STK# E00359, 2600 HRS, EXC, THUMB, 24"BUCKET, COUPLER, CALL PINE BUSH!................................................$$3366,,88000022000066 KKUUBBOOTTAA UU3355,, 160 HRS, HYD THUMB, AUGER CAB, WITH 5 TONTRAILER, CALL PINE BUSH! ................................................................$$4499,,00000022000055 KKUUBBOOTTAA KKXX112211--33,, STK# E00453C, 1011 HRS, CAB W/AC, STEELTRACKS, COUPLER, 18”, 24” & 36” BUCKETS, AUX. HYD. WELL MAIN-TAINED, CALL EAST PBE!.....................................................................$$3366,,000000

TRACTORSJJOOHHNN DDEEEERREE 445555,, STK# L33402, 600 HRS, TRACTOR/60IN MOWER, CALLPINE BUSH! ............................................................................................$$66,,11000022000000 KKUUBBOOTTAA BBXX22220000,, STK# L33679, 300 HRS, TRACTOR WITH MOWER,CALL PINE BUSH! ..................................................................................$$77,,55000022000044 KKUUBBOOTTAA BB2211,, STK# L33732, T/L/B, CALL PINE BUSH! ..............$$2211,,00000022000033 KKUUBBOOTTAA LL4488,, STK# L33801, 2297 HRS, T/L/B, CALL PINE BUSH! .......................................................................................................................$$2222,,00000022000055 KKUUBBOOTTAA GGRR22110000,, TRACTOR/MOWER, CALL PINE BUSH! ...........$$66,,00000022000044 KKUUBBOOTTAA BB77880000,, STK# T00321, 754 HRS, TRACTOR/ LOADER/MOWER/ TRENCHER, CALL PINE BUSH!............................................$$1133,,55000022000055 KKUUBBOOTTAA LL4488,, STK# T00334, 1050 HRS, TRACTOR/ LOADER/BACKHOE,CALL PINE BUSH! ................................................................................$$2299,,550000

TRAILER22000066 FFEELLLLIINNGG FFTT1100LLEE,, STK# T2280C, WOOD DECK, 10,000 LB CAPACITY,CALL EAST PBE!.....................................................................................$$33,,990000

CHIPPER22000055 VVEERRMMEEEERR BBCC11880000XXLL,, STK# L00103, CALL PINE BUSH! ..........$$2255,,550000

SWEEPER22000011 TTEERRRRAAMMIITTEE TTSSSS3388,, STK# L23627, 337 HRS, CALL PINE BUSH! ........................................................................................................................$$1144,,000000

TIRESKKUUBBOOTTAA,, STK# L33793, TIRES AND WHEELS FOR R52, CALL PINE BUSH! ....................................................................................................................$$11,,110000

HAMMER22000011 HHUUSSKKIIEE HHHH110000,, STK# L23621, 100 LB HAMMER, CALL PINE BUSH! ....................................................................................................................$$33,,550000

RTV22000055 KKUUBBOOTTAA RRTTVV990000--WW,, STK# U00360, OPEN, CALL PINE BUSH! ..........................................................................................................$$88,,55000022000044 KKUUBBOOTTAA RRTTVV990000--WW,, STK# U00405, 567 HRS, CALL PINE BUSH! .....................................................................................................$$77,,880000TTOORROO UUTTVV,, STK# U00717, 115 HRS, CALL PINE BUSH!...............$$44,,885500

ATTACHMENTSLLAANNDDPPRRIIDDEE QQHH1155,, STK# L27289, QUICK ATTACH, CALL PINE BUSH! ..............................................................................................................................$$227799

LLAANNDDPPRRIIDDEE LLRR11557722,, STK# L27274, 72” LANDSCAPE RAKE, CALL PINEBUSH! ........................................................................................................$$881133LLAANNDDPPRRIIDDEE RRBB00556600,, STK# L29283, REAR BLADE, CALL PINE BUSH! ............................................................................................................................$$338811

LLAANNDDPPRRIIDDEE RRCCRR22668844,, STK# L29263, ROTARY CUTTER, CALL PINE BUSH! ..................................................................................................................$$33,,114422LLAANNDDPPRRIIDDEE RRCCRR11554488,, STK# L30251, ROTARY CUTTER, CALL PINE BUSH! ....................................................................................................................$$997799

LLAANNDDPPRRIIDDEE RRCCRR11554488,, STK# L30252, ROTARY CUTTER, CALL PINE BUSH! ....................................................................................................................$$997799

LLAANNDDPPRRIIDDEE 330022110055AA,, STK# L30418, FLIP DOWN GRADER BLADE, CALLPINE BUSH! ..............................................................................................$$334411LLAANNDDPPRRIIDDEE FFDDRR11666600,, STK# L30825, FINISH MOWER, CALL PINE BUSH! ....................................................................................................................$$11,,556688LLAANNDDPPRRIIDDEE BBBB00555544,, STK# L32527, BOX BLADE, CALL PINE BUSH! ................................................................................................................................$$777700

HHIITTAACCHHII 6600IINN BBKKTT,, STK# A3882, NEVER USED 200 CLASS BKT 80MM PINSBOCE, CALL PINE BUSH!........................................................................$$22,,550000


• Close coupled centrifugal pump with

vacuum priming compressor mounted to

a diesel engine. Also available electric

motor driven.

• All cast-iron construction with ductile

iron impeller and wear plate.

• Solids handling capabilities to

3" (75mm). Will handle a variety

of materials.

• Exclusive Rainbow continuous priming

system designed with simplicity in mind.

• Dry run capabilities with double oil

pump seal.

• Available with skid mount integral fuel

tank in 100 gallon or 130 gallon capacity

and industrial strength off road or

highway DOT trailer.

• Available in a variety of diesel

engine options.

• Available with many accessory options

including AutoStart controllers.

• Sold and serviced by Rainbow’s exten-

sive dealer network established over

four decades of pump manufacturing.

One Rainbow Drive • P.O. Box 70 • Fitzgerald, Georgia 31750 USA(229) 423-4341 • Fax: (229) 423-4645 • www.rainbowirrigation.com

631/643-2605www.allislandequipment.com

Serving Nassau, Suffolk and the Five Boroughs since 1970

2006 Mauldin 1750C, 146 originalHrs, all updates completed

Save Big $$$, Like New Condition$67,000

2005 Kobelco SK70, 900 Hrs, Cab& A/C, Rubber Tracks, 6 month

Warranty$50,000

2004 Gehl 7810, 115 Perkinsdiesel, 2 Speed, Pilot Controls,

1cu yd Bucket, 950 Hrs$25,000

1998 Leeboy 8500 Low Deck,8'-15' with 1856 Hrs, Propane

Screed, Very Clean, Asking $22,500

2005 Takeuchi TL130, 1750 Hrs, 4in 1 Bucket, New Tracks and

Sprockets$19,500

1998 Gehl 4625, Only 1150 Hrs!,Bucket & Forks

$7,900

2006 LeeBoy 8515, 8’-15’ ElectricScreed, Stick Steering, 950 Original

HrsReduced $65,000

2001 Leeboy 8500 High Deck, 1050 Hrs, Very Clean!

Asking $39,500


Please Contact Kurt Kaeppel, Bob Williams or Chad Ketelsen 11200 W Silver Spring Rd. Milwaukee, WI 53225

800/353-1944 414/615-2193 www.fabco.comOutside WI & Upper Michigan Within WI & Upper Michigan Over 700 machines, listings updated daily

2005 Cat D6R XW. . . . . . . . . . . . $225,000s/n AEP00615 EROPS, A/C, SU Blade, 3,500 Hrs

1999 Cat D250E II. . . . . . . . . . . $102,500s/n 4PS00253, 7,600 hours, New Paint

2001 Cat D5C XL . . . . . . . . . . . . . $ 49,500s/n 7PS01604, OROPS, Heater, PAT Blade

1996 Cat 963B. . . . . . . . . . . . . . . $66,000s/n 9BL01219, EROPS, A/C, MP Bucket, County Trade

1988 Cat D4H . . . . . . . . . . . . . . . . $31,500s/n 8PB02730, OROPS, PAT Blade, Good U/C

1993 Cat D6H XL . . . . . . . . . . . . . $99,500s/n 9KJ00451, OROPS, 30" Pads, New Cat U/C, Rebuilt Engine, 8,147 hrs

1987 Cat D8N . . . . . . . . . . . . . . $122,000s/n 9TC01324, EROPS, S/S Ripper, SU Blade, Rebuilt Torque

2003 Kobelco SK480LC . . . . . . . . $95,000s/n YS06U0244, 7,000 hrs, bucket

1997 Cat 953C . . . . . . . . . . . . . . . . $57,000s/n 2ZN01337, EROPS, A/C, GP Bucket, Good U/C

1982 Cat D8L . . . . . . . . . . . . . . . . $95,000s/n 53Y00875, OROPS, SU Blade, Good U/C Steer

2000 Cat 325BL. . . . . . . . . . . . . . $89,000s/n 2JR02694, Hyd Coupler, Bucket, 9,300 hrs

1999 JD 160LC . . . . . . . . . . . . . . $57,000s/n 40753, Coupler, Bucket, 4,100 hrs

2002 Cat 315CL . . . . . . . . . . . . . . $91,000s/n CFT01023, A/C, Hyd Thumb, Bucket, Nice Unit

2004 Cat 420D . . . . . . . . . . . . . $63,000s/n FDP20309, EROPS, Ride Control, 4x4, E-Stick, Very Nice, 800 hrs

2005 Cat 236B. . . . . . . . . . . . . . . $27,500s/n HEN02601, EROPS, Heater, 342 hrs, Good year track system

2000 Cat 365BL . . . . . . . . . . . $430,000s/n 9TZ00382, Coupler, Bucket, Grapple, 2 sticks, MP40 Multi-Processor


2001 Cat D11R EROPS, A/C, 4 Brrl S/S Ripper, Excellent U/C, Svc History............................................................................................................................................$645,0002001 Cat D11R EROPS, A/C, U/Twin Tilt Dozer, 4 Brrl S/S Ripper, Very GoodCondition.............................................................................................................$759,500(2) 2004 Cat D10R EROPS, A/C, SU/Twin Tilt Dozer, 4 Brrl S/S Ripper, Very GoodU/C, Very Good Condition...................................................................................$CALL1993 Cat D9N EROPS, A/C, U/Tilt Dozer, 4 Brrl M/S Ripper, Excellent U/C, VeryGood Condition...................................................................................................$219,5001992 Cat D9N EROPS, A/C, 3rd Valve, SU/Tilt Dozer, NewU/C, Very GoodCondition.............................................................................................................$195,0002004 Cat D9R EROPS, A/C, SU/Tilt Dozer, 4 Brrl S/S Ripper, 8,300 Hrs.....$439,5002000 Cat D8R OROPS, SU/Tilt Dozer, 4 Brrl S/S Ripper, Excellent U/C, Very GoodCondition.............................................................................................................$259,5001998 Cat D8R, 12,564 Total Hrs, EROPS, A/C, SU/Tilt Dozer, 4 Brrl S/S Ripper,New U/C, Excellent Condition...........................................................................$219,500(2) 2004/05 Cat D6R XL II EROPS, A/C, SU/Tilt, Engine Enclosures, Sweeps, M/SRipper, Excellent U/C, Excellent Condition ...............................................$199,500 Ea.1998 Cat D6R LGP OROPS, Sweeps, S/Tilt Dozer, New U/C.........................$97,5001996 Cat D6H XL IG, EROPS, A/C, S/Tilt Dozer, Diff Steer, New U/C, Very GoodCondition...............................................................................................................$84,5002003 Cat D5G LGP, EROPS, A/C, Pat Blade, Good U/C, Very Good Condition ........................................................................................................................................$59,5002003 Cat D5N LGP, EROPS, A/C, Pat Blade, Good U/C, Very Good Condition.........................................................................................................................................$79,500

2003 Cat 963C EROPS, A/C, G/P Bkt w/Teeth, Ripper, Good U/C, VGC .....$119,5001999 Cat 953C, EROPS, A/C, G/P Bkt, Excellent U/C, Very Good Condition.$72,5001994 Cat 953B, EROPS, A/C, G/P Bkt, Poor U/C, Good Condition .................$42,000

1988 Cat 621E EROPS, A/C, Retarder, Auto Lube Sys, 8,000 Gal Mega Tank, 4 RearSpray Heads, Water Cannon...............................................................................$169,5002003 Cat 621G EROPS, A/C, Retarder, Power Train Guard, MEGA 8,000 GallonTank, 4 Rear Spray Heads, 2 Front Spray Heads, Remote Cannon, Hose Reel, Good33.25 x 29 Tires, Service History.......................................................................$319,500(2) 1987/88 Cat 769C EROPS, A/C, Retarder, Supp Steering, MEGA 9,000 Gal Tank,4 Rear & 2 Side Heads, Remote Cannon, Hose Reel, Good Tires, Very GoodCondition......................................................................................................$189,500 Ea.

(2) 2000 Cat 777D EROPS, A/C, Liners, Good Tires ........................................$CALL

1989 Cat 773B EROPS, A/C, Retarder, Supp. Steering, Liners,Very Good 24:00x35Tires, Very Good Condition................................................................................$169,5001995 Euclid R65 EROPS, Retarder, Cummins TA28C, Good 24:00R35 Tires, goodcondition..............................................................................................................$139,500(2) 1995/97 Komatsu 685E EROPS, A/C, Liners, Good Tires .................$645,000 Ea.1989 Dresser 685 Heat, A/C, Cummins, Liners, Good Tires............................$585,000

1990 Cat 16G EROPS, A/C, 16' Hyd S/S Moldboard, Tip Control, Accumulator,Circle Drive Slip Clutch, Push Block, Diff Lock/Unlock, Ripper, Rebuilt Power Train,Warranty, Very Good Cond, “0” Hrs Rbld.........................................................$209,5001991 Cat 16G A/C, Tip Control, Circle Drive Slip Clutch, Push Block, DiffLock/Unlock, Ripper, Very Good Condition......................................................$189,5002000 Cat 14H EROPS, A/C, 14' Hyd, S/S Moldboard, Ripper, New Tires,Accumulators ......................................................................................................$239,5002000 Cat 14H EROPS, A/C, 14' Hyd, S/S Moldboard, Ripper, New Tires,Accumulators ......................................................................................................$219,500

2003 Cat 950G II 3678 Ttl Hours, EROPS, A/C, Ride Control, G/P Bkt w/BOCE,Good Tires, Very Good Condition......................................................................$132,5002003 Cat 950GII 5303 Ttl Hrs, EROPS, A/C, G/P Bkt w/BOCE, 3rd Valve, GoodTires, Very Good Condition................................................................................$129,5001989 Cat 992C EROPS, A/C, Spade Bkt w/Teeth, Highlift, Good Condition.............................................................................................................................................$195,0001999 Cat 988F II EROPS, A/C, Spade Bkt w/Teeth, “0” Hrs on Rblt Engine, Trans &Torque, New 35/65R35 L5 Tires, Excellent Condition, Warranty Available ....$325,0002003 Cat 988GII EROPS, A/C, Spade Bkt w/Teeth, Very Good Tires............$339,5002006 Cat 966H, 2413 Total Hrs, EROPS, A/C, Ride Control, Quick Coupler, G/P Bktw/BOCE, Forks, Excellent 26.5R25 Tires, Excellent Condition.......................$269,500(2) 1998/99 Hyundai HL760 EROPS, A/C, G/P Bkt w/BOCE, Very Good Tires, VeryGood Condition............................................................................................$42,500 each2005 John Deere 744J 2,650 Ttl Hours, EROPS, A/C Ride Control, Quick Coupler,5.5 Cy Bkt w/BOCE, Forks, Very Good Tires, Excellent Condition ................$182,5002004 John Deere 544J EROPS, A/C, JRB Quick Coupler, G/P Bkt, Forks, RideControl, Good Tires, Very Good Condition .........................................................$82,500

2004 Cat 623G EROPS, A/C, Power Train Guard, Good 33.25x29 Tires, ExcellentCondition.............................................................................................................$409,500(2) Cat 627F EROPS, A/C, Push/Pull, Trans Guard, “0” Hrs on Rblt Hitch, VeryGood Tires, Very Good Condition...............................................................$355,000 Ea.

1996 Cat 690D EROPS, A/C, S/Twin Tilt Dozer..............................................$459,500

2006 Prevost XLII Royale Detroit, Allison, Dbl. Slide, 3 Axle Enclosed Trailer, 28kMiles....................................................................................................................$750,000

2000 Cat 365BL A/C, Reach Boom, 11'10" Stick, 82" GP Bkt w/Teeth, Very GoodU/C ......................................................................................................................$229,5002001 Cat 345BLII A/C, Reach Boom, 15'9" Stick, Aux Hydraulics, 65" Bkt w/Teeth,Very Good U/C, Good Condition, Service History............................................$125,0001999 Cat 330BL A/C, Reach Boom, 12'10" Stick, Aux Hydraulics, 2.1 CY Bktw/Teeth, Hydraulic Thumb, Very Good U/C, V. Good Cond, Service History...$97,5002003 Cat 330CL Reach Boom, 12'10" Stick, Aux Hydraulics, Pin Grabber Linkage,54" Bkt w/Teeth, 33 1/2" Pads, Very Good U/C, Very Good Condition...........$149,5001998 Cat 320BL A/C, Reach Booom, 9'7" Stick, Aux Hydraulics, 42" Bkt w/Teeth, 311/2" TBG Pads, Good U/C, Good Condition, Service History ...........................$CALL2003 Cat 320CL A/C, Reach Boom, 9'6" Stick, Aux Hydraulics, Pin GrabberLinkage, G/P Bkt w/Teeth, Hyd Thumb, 31 1/2" TBG Pads, Very Good U/C, VeryGood Condition.....................................................................................................$79,5002004 Hitachi ZX330LC A/C, 84" Stick, 3.3 cy G/P Bkt w/Teeth, 31.5" TBG Pads,Very Good U/C, Very Good Condition ..............................................................$144,5002003 Hitachi ZX360LC A/C, 10'6" Stk, 82" Bkt w/Teeth, 35" DBG Pads, Very GoodU/C ......................................................................................................................$139,5001999 Hitachi EX1100-3 A/C, 29'10" Boom, 11' Stick, G/P Bkt w/Teeth ..........$CALL2001 Komatsu PC400LC-6 A/C, 7'10" Stick, G/P Bkt w/Teeth, 36" TBG Pads,Excellent U/C, Very Good Condition.................................................................$122,5002005 Komatsu PC300LC-7 1,003 Ttl Hrs, A/C, 10'6" Stick, 56" G/P Bkt w/Teeth,Excellent U/C......................................................................................................$169,5002004 Komatsu PC300LC-7 A/C, 10'5" Stick, 54" Bkt w/Teeth, 33.5" TBG Pads......................................................................................................................................$142,500

(2) 1999 Cat D400E II EROPS, A/C, Retarder, Tailgate, Good Tires, Good Condition,Service History..........................................................................................from $149,5002002 Terex TA40 EROPS, A/C, Very Good 29.5R25 Tires, VGC...................$129,500

2000 Cat CP663E EROPS, A/C, Good Tires, Good Condition .........................$74,5001997 Cat CP563C EROPS, A/C, Padfoot Drum, 2 Speed Propel, Good Tires, GoodCondition, Service History ...................................................................................$45,0001996 Cat CS563C OROPS, Smooth Drum, 2 Speed Propel, Good Tires, GoodCondition, Service History ...................................................................................$55,000

Compactors

Articulating Trucks

Excavators / Shovels

Miscellaneous

Wheel Dozers

Scrapers

Wheel Loaders

Motor Graders

Rigid Frame Trucks

Water Equipment

Crawler Loaders

Crawler Dozers

Dallas – Jeff Miller • Doug Wall • Drew Van Brunt • Brandon North

Equipment SalesDallas, Texas

602 Wildlife Blvd.Grand Prairie, TX 75050

Ph: 972-264-6700Fax: 972-264-6720

[email protected] Habla Espanol

ler Loaders

Always part of the solution.Worldwide.

“We Own What We Advertise!”Online at www.dom-ex.com

CAT D8R

DEERE 744J CAT 623G CAT 621E KOMATSU PC300


By Matthew WillettCEG CORRESPONDENT

There are lights, cameras and fireworks.Thousands crowd together to feel in their

chests the greatest show in town, a townwhose shows are legend. And in a townwhere everything is on a fast track to bigger,grander, brighter this show’s the topper ofthem all.

The 32-story 49-year-old Stardust fellMarch 13, 2007, its reinforced concreteskeleton broken by 1,200 lbs. of explosivesand folded in on itself.

It was then only the latest in a string ofmemories that fell to the undeniable windsof change in Sin City, a city with demo up itssleeve.

“Demo in Las Vegas? It’s the most excit-ing. Part of demolition is the high-press,high-publicity aspect, but it’s very fun — Imean, there’s fireworks that are usuallyattached to the implosions. It’s a spectacularsight out there. We like to call it the capitolof demolition,” says President Josh Claussof Lakeside, Calif.-based ClaussConstruction.

Clauss could be described as part of a newgeneration of demo contractors in a city withan open call for them. He doesn’t let the fastpace mar his enthusiasm for the work.

Diversified Demolition Company Inc.’svice president Ken Mercurio is another fam-ily contractor. Diversified’s parent company,Diversified Concrete Cutting, has been inbusiness for 20 years and, as Mercurio said,his family has “definitely had a presence [inLas Vegas] much longer than that.”

“Demolition is kind of a spectator sport,”he says. “It intrigues a lot of people. You geta lot of Lookie Loos. When we did theimplosion at the Boardwalk Hotel andCasino we did the implosion on that at 2:30in the morning on a Tuesday, which is thetime window when it would be the least con-gested, and there were still about 30 or 40thousand people out there to watch.”

Foot traffic safety issues, ever-compress-ing time frames and a city with a fast-turnover mentality like no other combine tomake demolition in Las Vegas challengingand exciting, contractors say, but it’s thecharacter of the city itself and the structuresthey work in that make it unique.

It’s Vegas.“It’s a different deal, a real good life and

good times doing it. It’s a lot of fun, and thelonger it goes, it totally amazes me.”

That’s Art Goldstrum. If you want toknow about demolition in Las Vegas, youcould pick a worse place to start.

Half Century of ExperienceGoldstrum will be 74 in May. He came to

Las Vegas in 1940, and he’s seen it come andgo more than once.

Over the years, he’s played an instrumen-tal role in the “go” part.

As the president of Art GoldstrumEnterprises and its predecessor, GoldieDemolishing Company, Goldstrum’s been apart of demolition in Las Vegas from thebeginning of its golden era.

“Seventy-two to present. We really aren’tdoing much now, but we did the Fitzgeralddowntown, we did a bunch at the Horseshoe,and all those downtown, the Nugget, and onThe Strip we tore stuff out of the Stardustand we did the Dunes, both of them, theHacienda and most all of the big hotels,” hesays. “We did most all of the work for sever-al years that was done around here until allthe new guys came.”

The list goes on and on. The Boardwalk.Bourbon Street. The El Ranchero. The

Sands. Goldstrum remembers when the city was

young.“There was only like seven major hotels,

and as it grew everything had to go,” heexplains. “Like the Flamingo, it just didn’t fitinto the era. Right now there are a lot leavingthat weren’t that old either. The town grewand everything had to go and be replaced.Nothing was sacred. Well, most places.”

Already the character of the town wasbeing formed. In the late ’60s and through-out the ’70s new hotels and casinos began tochallenge the old guard built in the ’40s and’50s, like the Rivera, the Sahara, the Sandsand the Tropicana.

It was increased competition in a townwhere bigger means better, a town wheretime is money. A town where the press ofelectric neon lights means time is immateri-al — day or night, it’s Vegas.

“At first it seemed like the buildings,when they were built, five, six, seven ofthem, like they would be there forever,”

Goldstrum remembers. “As the town hasgrown now there’s nothing of them there, orthe MGM is there. It was just nothing com-pared to what has been built. It’s like theTropicana. The Tropicana is a piece of histo-ry, but you can’t make it work in this mega-environment right now.”

Making it work in an environment likeLas Vegas drives the demolition industry. Asthe city grew, landmarks like TheThunderbird and the 20th Century had to go.

And as the original structures’ replace-ments were built the cycle began anew.Goldstrum says the impermanence of LasVegas structures continues to amaze him.

“I’ve been here since 1940, and I neverwould have believed it would happen, neverin my wildest dreams did I figure. There wasthe El Rancho [Vegas], it was right there atthe Sahara and it was a big hotel, then the[Last] Frontier that they tore down years ago— those two and a couple of others,” hesays. “They went away and they’re all

see VEGAS page 18

Even as crews clean up debris from the Frontier demolition, the Wynn, one of the new generation of hotels, rises in the back-ground.

What Goes Up Must Come DownDemolition in Ever-Changing Las Vegas a Booming Industry


PA Auction License No: AY000281 While information is believed to be accurate, all items will be sold “As-Is, Where-Is” without guarantee or warranty. A physical inspection is suggested.

Call (800) 233-6898 or [email protected] For Complete,

Descriptive Brochure!www.hunyady.com

Complete LiquidationMartin Construction, Inc.

Thurs., March 27, 2008 – 9:00 A.M.Lineboro, MarylandCrawler Screening Plant,

Crawler Crushing Plant, and Trommel Screen`06 FINTEC 542Crawler ScreeningPlant, s/n 2006-542-764 • `01 BL-PEG-SON 428 TrakpactorCrawler ImpactCrusher, s/nQM015081S • REMUM S K 2 - 1 5 0 - U STrommel Screen, s/n MSK2-150-US-058

Crawler Tractors, Crawlerand Rubber Tired Loaders

`03 JD 650H LGP, s/n 913885 •`02 JD 450HLT, s/n 906092 •(2) `00 CAT 953C, s/n2ZN03677 & 2ZN03595 • JD855, s/n 313327T • (2) `97 JD744H, s/n 560868 & s/n 559712• `90 CAT IT18B, s/n4ZD00840

Hydraulic and RubberTired Excavators and Attachments

`97 CAT 322BL, s/n 1YS00364 • `98 JD 270LC, s/n 070172• `07 BOBCAT 331G Mini, s/n 234316048 • `94 SAMSUNGSE210W Rubber Tired, s/n GAY0669 • `07 NPK H12XEHammer

Feller Buncher, Belted Ag Tractor, and Attachments

`93 HYDRO-AX 621E Articulated Tractor, s/n 4248 • `93HYDRO-AX 8’ Rotary Ax Brush Cutter, s/n A621E519 •HYDRO-AX 20FB, 20” Feller Buncher, s/n 3324 • `96 CATChallenger 55 Belted Ag Tractor, s/n 7DM00270

Tractor Loader Backhoe, Crawler Skid Steers, and Broom

`05 CAT 420D, 4x4 Extend-A-Hoe, s/n FDP22484 • (2) `07BOBCAT T-250, s/n 531813249 & 531813053 • `07 BOB-CAT 72” Hydraulic Sweeper Attachment, s/n 783718449

Compactors(2) `87 IR SP-48 Vibratory Compactor, s/n 6057-S & 6112-S • WACKER RT820 Vibratory Trench Compactor

Truck Tractor and Lowboy Trailer`02 PETERBILT 379 T/A, Cat C-15 • `06 TALBERT, 55Ton Tri-Axle Lowboy

Dump and Service Trucks`04 PETERBILT 379 Tri-Axle, Cat C-15 • `88 PETERBILT379 S/A Service Truck, IMT 16’ service body w/IMT hydcrane, Lincoln welder, air compressor

PLUS: Stake Body, Utility, and Flatbed Trucks • PickupTrucks • Conversion Van and Sport Utility Vehicles • 20 TonTag-Along, Drop Deck, and Flat Trailers • Office/StorageTrailer and Overseas Containers • Arrowboard and Generator• Straw Blower • Forklifts • Equipment Attachments •Contractors Tools and Shop Equipment • Survey Equipment

Surplus EquipmentGernatt Asphalt Products, Inc.Thurs., May 1, 2008 – 9:00AM

Chaffee, New YorkRubber Tired Loaders and Crawler Tractors

`98 CAT 980G, s/n2KR02079 • `96 CAT980G, s/n 2KR00521 •`00 CAT 972G, s/n7LS00294 • `00 CAT972G, s/n 7LS00292 •`86 CAT D7H, s/n79Z01139 • `83 CATD6D, s/n 04X08976

Motor Scraper, Tractor LoaderBackhoe and Hydra Hammer

`83 CAT 615 Elevating, s/n 46Z00841 • `85 JCB 1700B, 4x4,s/n 17BT4085/314238/7 • CHAMPION H-16, s/n 2157, mtdon Ford Utility Tractor

Rough Terrain Cranes and Rough Terrain Forklift

`83 GROVE RT865,65 Ton, s/n 66151,Detroit dsl, 36’-114’4-section boom w/ 26’power-pin fly, 32’swingaway jib, w/inserts, to 88’ jib, aux-iliary hoist • YALERT40-25T, 25 Ton,

s/n 22C-1037, 26’6”-75’6” 4-section boom w/ 15’ fly section,16’-24’ telescopic jib • `97 CAT TH83, 8,000# Telescopic, s/n3RN00723

Jaw Crushers, Screening Plant, and Soil Shredder

CEDARAPIDS Portable Jaw Crusher, s/n 26788 • (2)10”x36” Bare Jaws • POWERSCREEN Portable ScreeningPlant, s/n 2302421, 3’x6’ 2-deck screen • ROYER 365Portable Top Soil Shredder, s/n 36581503

Dump Trucks(2) `97 MACK RD690S Tri-Axle • `91 MACK RD688ST/A, Mack E6-350, 350HP

Truck Tractor & Dump Trailers`90 MACK CH613 T/A, Mack E6-350, 350HP • (2) `90 &`89 FRUEHAUF 35’ T/A, alum tub w/steel frame

Bucket Truck, Utility Truck, and Plow Truck`92 ALTEC AN652, 52’ Material Handler Bucket, s/n 0292-U0796, mtd on `92 Chevy Kodiak S/A Truck • `78 GMC 6500S/A Utility Truck • OSHKOSH W-A-2208, 4x4Plow/Spreader Truck

Pickup Trucks and Van Body`05 FORD F-350 Lariat Super Duty, 4x4 Crew Cab • `03CHEVROLET 3500LS, 4x4 Crew Cab • `99 CHEVROLET2500, 4x4 Extended Cab • `00 FORD F-150XLT, 4x4Extended Cab • `98 FORD F-150XLT, 4x4 Extended Cab •`85 GMC Vandura 3500 S/A Van Body

PLUS: Skid Mounted Gen Sets • Attachments • Hook Blocks• Electric Motors • Mowers • 3-Wheel Electric Carts • AerialLift

Surplus EquipmentR&R Construction Co., Inc.

Wed., April 9, 2008 – 9:00 AMChester, New Jersey

Crawler Crushers and Screen/Stackers and Gen Set

`05 METSO NORDBERGLokotrack LT300HP CrawlerCone Crusher, s/n 72775, CatC15, 530HP diesel engine,w/`05 Metso HP300 ConeCrusher, s/n 30310827 • `04LIPPMAN J30x48 PortableJaw Crusher, s/n 2004-0541 •

`05 TEREX FINLAY 693 Supertrak Crawler Screening Plant,s/n FTA550154 • `04 NORTHSTAR 36”x100’ RadialStacker, s/n NS-36X100-1104 • `04 NORTHSTAR 3-P-330,36”x60’ Radial Stacker • `04 BROADCROWN 190KW SkidMounted Gen Set

Hydraulic Excavators`98 CAT 325BL, s/n 2JR01818 • `97 CAT 312B, s/n9HR02587 • `98 HITACHI EX110-5, s/n ACD120030 • `95JD 190E, s/n 011067 • `93 CAT E120B, s/n 6JF01184

Crawler Tractors and Loader`98 CAT D5C LGP Series III Hystat, s/n 6CS00370 • `98 JD450G LGP Series IV, s/n 840829 • `79 CAT D6D, s/n 4X4413• `98 CAT 973, s/n 86G03287

Rubber Tired Loader, Backhoes, and Tractor`98 CAT 950G, s/n 2JS00475 •`85 CAT 950B, s/n 22Z01861,60” fork attachment, hydraulicside dump bucket • `86 CAT936, s/n 33Z02384 • `95 CAT416B, 4x4 Extend-A-Hoe, s/n8SG09307 • `89 JD 510C, 4x4Extend-A-Hoe, s/n 759829 •`88 JD 410C, 4x4 Extend-A-Hoe, s/n 749219 • `88 JD 310C, 4x4, s/n 749309 • `88 JD310C, s/n 747995 • `88 JD 4850, 4x4 Utility Tractor, s/n012239

Pulverizer, Paver, Rollers, and Compactors`98 IMPACT ROLLER TECHNOLOGY Impactor 2000Hydraulic Pulverizer/Ground Conditioner, s/n KG99R0658 ∞`04 LEEBOY L8500T Crawler Paver, s/n 42800HD ∞ `91CAT CB-434 Tandem Vibratory Roller, s/n 3TF00138 ∞ `05IR DD-10S Tandem Roller, s/n 010155 ∞ BOMAGBW172D-2 Vibratory Compactor, s/n 520116825 ∞ `92 IRSD40D Vibratory Compactor, s/n 54285 ∞ `01 AMPACP33/24 Trench Compactor, s/n L2-IP33072701 ∞ `97AMERAMAX 33L2IR Vibratory Trench Compactor, s/n33070970

Forklift and Air Compressors`85 CASE 586D, 6,000# Rough Terrain, s/n 17019251 • `85IR P-185C-W-JD, 185 CFM Portable, s/n 151783U85957 •SULLIVAN D185QV, 185CFM Portable, s/n D277561

Dump, Van, and Utility Trucks`98 MACK RD600GK S/A Dump, Mack E6-350, 350HP •`03 FORD E350 Super Duty Van Body Truck, Powerstrokedsl • `01 CHEVY 3500 Silverado Utility Truck • `99 FORDF-350 Super Duty Utility Truck, Duramax dsl

Lowboy and Tag-A-Long Trailers`99 TRAILKING 55 Ton Tri-Axle Lowboy, 8’6”x24’ leveldeck • `02 EAGER BEAVER 20 Ton T/A Tag-A-Long • `90EAGER BEAVER T/A

(3) ABSOLUTE AUCTIONS


3000 South Austin AvenueGeorgetown, TX, USA 78627-1609

Tel: 512-942-3000 • Fax: 512-863-3776www.manitex.com

All Manitex ProductsBacked by

ComprehensiveProduct Support

ManitexMore Models...

More Markets...

Meet the new 5096S

Manitex continues its...

commitment to new product development, driven by customer input.

More than 20 new models since 2003.

What’s Your Market?

Need a Taxi? Our latest offering is the most versatile Manitex yet. The new 5096S Truck Mounted Cranewith 152’ tip height, offset jib and a strong load chart is an unbeatable value that replaces traditional, more expensive, solutions.

If it’s Power Distribution, the 124SX, 35124C and 40124S provide the widest selection of options. All three platforms have man basket heights to 166’.

Heavy Lifts pay the bills? The 40124SHL provides more capacity at radius than any boom truck in the market.

If Duty Cycle is the key, all Manitex S and SX series boom trucks are configured with feather soft controls for multifunction operation, continuous rotation, retracted outrigger charts and oil coolers as standard. The 30112S, our latest addition to the S series line, reaches new heights with a maximum tip height of 168’.

Payload necessary? The 26101C weighs up to 5,000# less than competitive models and the 30102C provides up to 10,000# payload on a 54,000 GVWR chassis.

Wireline Work? The 102WL provides 30 ton crane capacity and the 124WL offers 134’ tip height without a jib.

Truss work is made efficient with the 2281T, the highest capacity tractor mount on three axles.

Five new SC series models support Sign Erection and Service with working heights from 62’ to 97’. Our newest, the SC-85 provides 85’ working height and 12 ton crane capacity.

New Market Solutions?………Ask Manitex!

The Leader In Boom Truck Innovation

More Crane Gold Lot #330


ASPHALT EQUIPMENTIR DD12S, 16 HP, 2905 LBS OPER. WEIGHT, 35" DRUM WIDTH, GAS ENGINE, 229 HRS #34094.............................................................................................................................................$CALLIR DD16, 17 HP, 3570 LBS OPER. WEIGHT, 39" DRUM WIDTH, 286 HRS #70896......................................................................................................................................................................$CALLIR DD34HF, 44 HP, 8400 LBS OPER. WEIGHT, 54" DRUM WIDTH, 2 TO CHOOSE FROM, STARTING AT 549 HRS.....................................................................................................................$CALLIR DD110HF, 125 HP, 25360 LBS OPER. WEIGHT, 78" DRUM WIDTH, 3 TO CHOOSE FROM, STARTING AT 3704 HOURS........................................................................................................$CALLIR DD125, 148 HP, 28043 LBS OPER. WEIGHT, 84" DRUM WIDTH, 2414 HRS #27086..............................................................................................................................................................$CALLIR DD158HFA, 185 HP, 33810 LBS OPER. WEIGHT, 84" DRUM WIDTH, 1444 HRS #70277 .......................................................................................................................................................$CALLSAKAI SW850, 125 HP, 28,510 LBS OPER. WEIGHT, 79" DRUM WIDTH, 755 HRS #71413........................................................................................................................................................$CALLSAKAI SW900, 166 HP, 29,630 LBS OPER. WEIGHT, 84" DRUM WIDTH, 2 TO CHOOSE FROM. STARTING AT 1480 HRS ........................................................................................................$CALLSAKAI GW750, 109 HP, 20580 LBS OPER. WEIGHT, 77" ROLLING WIDTH, 236 HRS #71412....................................................................................................................................................$CALLBLAW KNOX PF5510, 188 HP, TRACK PAVER, OMNI IIIA SCREED, 10' TO 18' PAVING WIDTH, BLAW KONTROL DUAL SONIC AUTOMATION, 1' EXT’S, TRUCK HITCH, GEN KIT, 3893 HRS#70677..........................................................................................................................................................................................................................................................................................$CALLTEREX/CEDAR RAPIDS CR452 DEMO UNIT, 220 HP, RUBBER TIRED PAVER, FRONT WHEEL ASSIST, VERSA SCREED 10, GEN SET KIT, 57 HOURS ............................................................$CALLMARINI MP2000 495 HP, 62500 LBS OPER. WEIGHT, 79" MILLING HEAD W/ FAST CHANGE TEETH, 12.5" CUTTING DEPTH, 2 STAGE VARIABLE SPEED 32" WIDE CONVEYOR, FOLDINGCANOPY, 1982 HOURS, #27063 ...................................................................................................................................................................................................................................................$CALLTRADESIR DD24, 44 HP, 6,400 LBS, 49" DOUBLE DRUM WIDTH, TRADED IN ON A NEW SAKAI SW330 6739 HOURS ........................................................................................................................$CALLKOMATSU PC400LC-7, 345 HP, 97885 LBS OPER. WEIGHT, 23'2" BOOM, 36" TRACKS, TRADED IN ON A KOBELCO SK480LC, 46" BUCKET, 4152 HRS, #TBA .............................................$CALLNEW HOLLAND LS170, 50 HP, 5540 LBS OPER. WEIGHT, 3500 LBS TIPPING LOAD, STA. FLOW, FOOT CONTROLS, 10X16.5 TIRES, 2833 HRS #71302 ...................................................$12,900JOHN DEERE 310D, 70 HP, 4WD, CAB, HED, 1.1YD LDR BKT, 12X16.5/19.5X24 TIRES, 5383 HRS #71336...........................................................................................................................$19,900NEW HOLLAND 555E, 83 HP, 2WD, CAB, HED, 1.3YD LDR BKT, 5465 HRS #TBA....................................................................................................................................................................$18,500

MARINI MP2000

IR/BLAW KNOX PF5510

IR DD24 JUST IN!

IR DD110HF

TEREX/CEDAR RAPIDS CR452

SAKAI GW750

Chelmsford, MA800-804-0775

Bangor, ME800-698-4838

Westbrook, ME800-262-5714

Caribou, ME800-270-2547

Concord, NH800-477-4063

2002 Cat 725,(7174)Bangor, ME800-698-4838$137,500

1996 Volvo A25C,(7175)Bangor, ME800-698-4838$50,000

2004 Volvo EW180B,4172 hrs, (7164)Westbrook, ME800-262-5714$90,000

1995 Cat 312L, manualthumb, nice unit(7201)Chelmsford, MA978-479-5192$37,500

1999 Hyundai 160LC-3,3583 hrs (7202)Chelmsford, MA978-479-5192$38,500

1996 Liebherr 932material handler,new engine, (7170)Chelmsford, MA978-479-5192$139,500

2000 Cat 226,full cab/heat, 998 hrs

(7187)Chelmsford, MA

978-479-5192$17,000

2002 Volvo EC290BLC,(7084)

Concord, NH800-477-4063

$129,000

2002 Volvo EC240BLC,(7142)

Concord, NH800-477-4063

$90,000


SALES, RENTAL, SERVICE & PARTSWilliston,VT Syracuse, NY Worcester, Mass802.658.1700 315.676.2008 508.756.1757

fax: 802.862.9442 fax: 315.676.2422 fax: 508.795.1759

IN STOCK NOWCOME IN FOR A DEMO TODAY

Serving New England and New York State since 1961

Monday thru Friday 7:00 am thru 5:00 pmwww.woodscrw.com

New National 14127H, 33 Ton, 127' +30', InternalA2B, Glide Swing, Front Stabilizer, Sterling LT9513 ........................................................................$253,000

1990 National 775B, 75'+35'. swivel Ball, FordL8000 270HP Rear-Mntd Hyd Out/Down Outriggers,Differential Lock, Stk# 4818 ..........................$42,000

New National 13110A, 30 Ton, 110'+44', JoystickControls, 18' Wood Bed, Internal A2B, Man Basket,Sterling LT9513 ....................................Call for Price

1996 National 880C, 21 Ton, 80'+43', DownhaulBall, Radio ATB, SFO, 6x4, Mack RD688SX, Stk#4740 ................................................................$79,500

New Shuttlelift 7755, 5-Sect Boom, 2/4/Crab Steer,Diesel Cummins, 17’ Offset Jib, Lift & Tie DownLugs, Stk# 4305 ............................................$239,000

New Tadano TM1052, 10 Ton, 52' Boon, 360 DegCont Rotation, 18' Wood Deck, Radio RemoteControl, Non-CDL Chassis, GMC Topkick..$114,900

New National 13110H, 30 Ton, 110' Boom, 22'Super Duty Wood Bed, Out & Down Outriggers,66,000 lb GVWR ..........................................$245,000

AuthorizedDistributor

• Used Boom Trucks Available• Trade-Ins Welcome• Call for information on CRW

Boom Truck Starter Package

• Special Truck Chassis Warranties• 5, 10 & 18-Ton Tadano Cranes

in Stock Available to beMounted on Your Chassis

Immediate Delivery

Financing Rates as Low as 6.87%

2000 Link-Belt HTC8660, 110' + 56', 40T 4-Shv Blk,Ball, LCF2000 Cab. Winch Rollers, Detroit Series 60365HP, Stk# 4721 ........................................$309,000

1997 Link-Belt HTC8670, 70 Ton, 115’+61’, Block,Ball, LMI, Detroit Diesel 60, 8x4, 16000# Full Ctwt,Stk# 4867......................................................$299,500

2007 Terex T340-1XL, 40 Ton, 32'-49' Offset Jib,40T 4-Shv Hkblk, 7T Hkball w/Latch Hook, 105’Main Boom ........................................................$POR

Sub Prime @ CRW

means Low-Low Rates for new Boom Trucks.For a limited time you can

upgrade to a new National or Tadano Boom Truck and pay as

little as 5.9% for up to 84 months Financing Term

for Qualified Buyers

100% Financing is available to qualified Buyers.

* All machines are subject to prior sale and offers are subject to satisfactory credit approval. Rates are subject to change.

Prices exclude any applicable sales taxes.


EQUIPMENTSOLUTIONS.The full line of Cat® compact equipment and building construction products cuts through the industry’s toughest construction jobs with a ruggedness unmatched across the industry. Along with the industry’s largest line-up of equipment is the

.relaed taC ruoy morf troppus dna ecivres delellarapnu

For more details about the full line of Caterpillar equipment stop in or call us today. And when the job calls for rental equipment, remember - you can rent it at The Cat Rental Store. With over 30 locations conveniently located through California we’re just a call away.

©2007 Caterpillar Inc. All rights reserved. CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

From large to small, mining to finishing work, you are certain to find a Cat Track-Type Tractor to match your needs.

From larmining toyou are

D5N

New Cat 414E Industrial Loader. Based on legendary Cat Backhoe Loader experience, it features a Cat exclusive single joystick that’s ergonomically designed.

NewLoaleg

414E IL

The Cat Skid Steer Loader, with many work tool options, is ideal for a wide range of applications.

The CatLoader,tool opt

272C

Whether you’re digging, trenching, backfilling or handling material, a Cat® E-Series Backhoe Loader will meet your needs.

Whetherenchin

or hand416E

www.quinncompany.com562-463-4000

Bakersfield • City of IndustryCorcoran • Firebaugh

Foothill Ranch • FresnoLancaster • Oxnard • Salinas

San Fernando Valley • Santa Maria

www.petersontractor.com888-738-3776

Antioch • Chico • FortunaMt. Shasta • Redding

San Leandro • San MartinSanta Rosa • Willits • Willows

www.johnson-machinery.com951-686-4560

Fontana • Indio • Riverside Temecula • Victorville

www.hawthornecat.com800-437-4228

San Diego • San MarcosSouth Bay

www.holtca.com800-452-5888

Pleasant Grove • StocktonLos Banos • Williams


FeaturedEquipment

2003 John Deere 550H Crawler Dozer – ROPS,LGP Machine with 4600 hours, S/N#923465

Price Upon Request

Hydrema Multi Tip Trucks are now available forrent & sale. Please call us for more details!!!

1973 JOHN DEERE 570A MOTOR GRADER,LOW HOURS, BRAND NEW MOTOR INSTALLED

ASKING $24,500

� DOZERS1990 400G STK# 765172A1 2700 HRS, NEW SPROCKETS AND ROLLERS....................................$19,0002005 450J STK# 548546R1, 656 HRS, CAB MACHINE EQUIPPED WITH 24" PADS AND 115" BLADE..........................................................................................................................................................$79,0001989 550G STK# 754093A1, 5127 HRS, ROPS MACHINE WITH 18" PADS AND 104" BLADE.......$22,5001990 550G STK# 875855, 3595 HRS, MACHINE IN GOOD CONDITION, MAKE OFFERS!.............$35,0002003 550H STK# 923425A1, 4500 HRS, ROPS MACHINE WITH 24" PADS AND 121" BLADE..............................................................................................................................................................PRICE UPON REQUEST 2003 550H STK# 923465A1, 4600 HRS, ROPS MACHINE WITH 24" PADS AND 121" BLADE..............................................................................................................................................................PRICE UPON REQUEST 2003 550H STK# 923591A1, 4528 HRS, ROPS MACHINE WITH 24" PADS AND 121" BLADE.........................................................................................................................................PRICE UPON REQUEST 2006 650J STK# 571927, 2388 HRS, CAB MACHINE EQUIPPED WITH 28" PADS AND 128" BLADE..........................................................................................................................................................$87,5002004 700H STK# 519979, 1182 HRS, ROPS MACHINE EQUIPPED WITH 22" PADS AND 120" BLADE..........................................................................................................................................................$96,0002003 700H STK# 492913, 2762 HRS, ROPS MACHINE EQUIPPED WITH 22" PADS AND 120" BLADE..........................................................................................................................................................$64,9002004 750C STK# 933757A1, 1960 HRS, CAB MACHINE EQUIPPED WITH 24" PADS AND 129" SIX-WAY BLADE .......................................................................................................................................$132,0002005 750C STK# 529965, 1532 HRS, CAB MACHINE EQUIPPED WITH 24" PADS AND 129" SIX-WAY BLADE .......................................................................................................................................$139,0002005 750J STK# 535773, 1504 HRS, CAB LONG TRACK MACHINE WITH 6-WAY BLADE..........$159,0002006 750J STK# 574572, 1494 HRS, CAB WIDE TRACK MACHINE WITH 6-WAY BLADE...........$175,0002001 850C STK# 435126, 4598 HRS, LGP CAB MACHINE WITH 152" STRAIGHT BLADE AND 38"PADS, EXTENDED WARRANTY REMAINING!!!...................................................................................$125,0002002 850C STK# 463364, 4375 HRS, WXLT CAB MACHINE WITH 158" 6-WAY BLADE AND 30" EXTRA LONG TRACKS, EXTENDED WARRANTY REMAINING!!!....................................................$105,0002003 850C STK# 476699, 4402 HRS, WXLT CAB MACHINE WITH 158" 6-WAY BLADE AND 30" EXTRA LONG TRACKS, EXTENDED WARRANTY REMAINING!!!....................................................$120,0002004 850C STK# 509304, 2836 HRS, CAB WIDE TRACK MACHINE WITH A STRAIGHT BLADE$177,0002004 850C STK# 509306, 2404 HRS, CAB LONG TRACK MACHINE WITH 6-WAY BLADE .........$179,0002005 850C STK# 528587, 3677 HRS, CAB WIDE TRACK MACHINE WITH 6-WAY BLADE ..........$205,0002005 850C STK# 528588, 2071 HRS, CAB WIDE TRACK MACHINE WITH SEMI-U PUSH BLADE.................................................................................................................................................................................$170,0002005 850J STK# 535780, 2783 HRS, CAB WIDE TRACK MACHINE WITH 6-WAY BLADE...........$212,000� BACKHOES/SKID STEERS2004 310G STK# 500847, 1942 HRS, MACHINE EQUIPPED WITH FOUR WHEEL DRIVE, EXTENDAHOE, STANDARD LOADER AND BACKHOE BUCKETS ....................................................$41,5002006 310G STK# 571097, 575 HRS, MACHINE EQUIPPED WITH FOUR WHEEL DRIVE, EXTENDAHOE, STANDARD LOADER AND BACKHOE BUCKETS ....................................................$55,0002006 310G STK# 575399, 957 HRS, MACHINE EQUIPPED WITH FOUR WHEEL DRIVE, EXTENDAHOE, STANDARD LOADER AND BACKHOE BUCKETS ....................................................$55,0002004 310SG STK# 522410, 1550 HRS, MACHINE EQUIPPED WITH FOUR WHEEL DRIVE,EXTENDAHOE, STANDARD LOADER AND BACKHOE BUCKETS...................................................$48,500

2005 310SG STK# 551973, 2531 HRS, MACHINE EQUIPPED WITH FOUR WHEEL DRIVE, EXTENDAHOE, STANDARD LOADER AND BACKHOE BUCKETS ....................................................$48,5002003 410G STK# 917045A1, 2637 HRS, CAB MACHINE WITH A/C, FULLY LOADED, 1.5YD GENERAL PURPOSE LOADER BUCKET, GOOD CONDITION...........................................................$59,5001996 510D WITH HAMMER STK# 819468A1, 3838 HRS, TWO WHEEL DRIVE, STANDARD HOEMACHINE WITH 1500# HAMMER MOUNTED ON BACKHOE.............................................................$29,5001996 510D WITH HAMMER STK# 819528A1, 3955 HRS, TWO WHEEL DRIVE, STANDARD HOEMACHINE WITH 1500# HAMMER MOUNTED ON BACKHOE.............................................................$29,5002003 710G STK# 476510, 2947 HRS, MACHINE EQUIPPED WITH FOUR WHEEL DRIVE, STANDARD HOE, STANDARD LOADER AND BACKHOE BUCKETS ................................................$85,0002003 710G STK# 478433, 2299 HRS, MACHINE EQUIPPED WITH FOUR WHEEL DRIVE, STANDARD HOE, STANDARD LOADER AND BACKHOE BUCKETS ................................................$85,0002005 CT322 STK# 116171A1, 521 HRS, FOOT CONTROL, ROPS UNIT WITH HYDRAULIC QUICK-TATCH AND 72" CONSTRUCTION BUCKET.............................................................................$30,0002004 270 SKID STEER LOADER STK# 934514A1, 670 HRS, ROPS MACHINE WITH FOOTCONTROL AND HYDRAULIC QUICK TATCH .........................................................................................$22,000� EXCAVATORS2005 135C STK# 518435, 1851 HRS, MACHINE EQUIPPED WITH 24" PADS, 9'11" ARM AND 30" HEAVY DUTY BUCKET..............................................................................................................................$87,0002005 135C STK# 300375A1, 1333 HRS, MACHINE EQUIPPED WITH 24" PADS AND BLADE, 8'3" ARM AND 30" HEAVY DUTY BUCKET ....................................................................................................$95,0002006 135C STK# 583116, 1868 HRS, MACHINE EQUIPPED WITH 24" PADS, 9’11" ARM AND 30" HEAVY DUTY BUCKET..............................................................................................................................$93,0002005 135C STK# 553127, 498 HRS, MACHINE EQUIPPED WITH 24" PADS AND BLADE, 9’11" ARM AND 30" HEAVY DUTY BUCKET ..................................................................................................$105,0002000 160LC STK# 041405A1, 5156 HRS, CAB MACHINE WITH HEAT ONLY, INCLUDES HELACSWINGER COUPLER AND 36" BUCKET ..................................................................PRICE UPON REQUEST2004 160CLC STK# 044685A1, 3257 HRS, GOOD CONDITION, INCLUDES BUCKET AND HYDRAULIC THUMB................................................................................................................................$105,0002006 160CLC STK# 581118, 1671 HRS, CAB MACHINE WITH 24" PADS, 8'6" ARM AND 36" HEAVY DUTY BUCKET............................................................................................................................$113,0002005 200CLC STK# 518845, 1922 HRS, MACHINE EQUIPPED WITH 32" PADS, 9'7" ARM AND 42" HEAVY DUTY BUCKET.....................................................................................................................$109,0002005 200CLC STK# 505658A1, 1728 HRS, EXCELLENT CONDITION, LOW HOURS, INCLUDES 42" HEAVY DUTY BUCKET.......................................................................................................................$95,0002006 200CLC STK# 574205, 1545 HRS, MACHINE EQUIPPED WITH 32" PADS, 9'7" ARM AND 42" HEAVY DUTY BUCKET .....................................................................................................................$116,0002005 225C STK# 538818, 1570 HRS, MACHINE EQUIPPED WITH 32" PADS, 9'7" ARM AND 42" HEAVY DUTY BUCKET............................................................................................................................$142,0002005 225C STK# 541783, 1233 HRS, MACHINE EQUIPPED WITH 32" PADS, 9'7" ARM AND 42" HEAVY DUTY BUCKET............................................................................................................................$145,000

2005 225C STK# 574282, 1389 HRS, MACHINE EQUIPPED WITH 32" PADS, 9'7" ARM AND 42" HEAVY DUTY BUCKET............................................................................................................................$154,0002003 225C STK# 500048A1, 2713 HRS, MACHINE EQUIPPED WITH 32" PADS, 9'7" ARM AND 42" HEAVY DUTY BUCKET .....................................................................................................................$115,0001998 230LC STK# 600034A1, 5898 HRS, CAB MACHINE WITH 32" PADS, 9'9" ARM, INCLUDES JRB COUPLER............................................................................................................................................$65,0001999 270LC STK# 070445A1, 8029 HRS, MACHINE INCLUDES COUPLER AND 42" BUCKET, CAB WITH HEAT...........................................................................................................PRICE UPON REQUEST2005 270CLC STK# 549017, 2130 HRS, MACHINE EQUIPPED WITH 32" PADS, 10'2" ARM AND 48" HEAVY DUTY BUCKET.....................................................................................................................$175,0002005 270CLC STK# 549018, 2662 HRS, MACHINE EQUIPPED WITH 32" PADS, 10'2" ARM AND 48" HEAVY DUTY BUCKET.....................................................................................................................$170,0002005 270CLC STK# 542121, 2628 HRS, MACHINE EQUIPPED WITH 32" PADS, 10'2" ARM AND 48" HEAVY DUTY BUCKET.....................................................................................................................$165,0002005 330CLC STK# 551980, 2506 HRS, MACHINE EQUIPPED WITH 32" PADS, 10'6" ARM AND 54" HEAVY DUTY BUCKET.....................................................................................................................$173,0002005 370C STK# 548540, 2777 HRS, MACHINE EQUIPPED WITH 30" PADS, 10'6" ARM AND 54"HEAVY DUTY BUCKET............................................................................................................................$198,0002001 370LC STK# 412117, 6030 HRS, MACHINE EQUIPPED WITH 30" PADS, 10'6" ARM AND 54" HEAVY DUTY BUCKET.......................................................................................................................$99,0002001 450CLC STK# 435131, 5512 HRS, MACHINE EQUIPPED WITH 36" PADS, 12'10" ARM AND 60" HEAVY DUTY BUCKET..................................................................... CONTACT SALES MANAGER 2005 450CLC STK# 538887, 2913 HRS, MACHINE EQUIPPED WITH 36" PADS, 12'10" ARM AND 60" HEAVY DUTY BUCKET.....................................................................................................................$269,0002005 450CLC STK# 544487, 3472 HRS, MACHINE EQUIPPED WITH 36" PADS, 12'10" ARM AND 60" HEAVY DUTY BUCKET............................................................................................................$289,0002004 600CLC STK# 491326, 5688 HRS, MACHINE EQUIPPED WITH 36" PADS, 11'6" ARM AND 72" HEAVY DUTY BUCKET....................................................................................................................$249,0002005 600CLC STK# 551962, 2253 HRS, MACHINE EQUIPPED WITH 36" PADS, 13'5" ARM AND 72" HEAVYDUTY BUCKET......................................................................................................................$425,0002004 600CLC STK# 951033A1, 4163 HRS, MACHINE EQUIPPED WITH 36" PADS, 13'5" ARM AND 72" HEAVY DUTY BUCKET............................................................................................................$325,0001996 790E STK# 015688A1, 7725 HRS, CAB MACHINE WITH 32" PADS, 9'9" ARM........................$37,0002006 80C STK# 581984, 750 HRS, MACHINE EQUIPPED WITH 24" PADS, 6'11" ARM AND 24" HEAVY DUTY BUCKET..............................................................................................................................$85,0002005 80C STK# 541734, 1696 HRS, MACHINE EQUIPPED WITH RUBBER TRACK AND 24" HEAVYDUTY BUCKET............................................................................................................................................$68,0002005 35D STK# 235049A1, 270 HRS, CAB MACHINE WITH HYDRAULIC THUMB AND BUCKET$33,0002004 BOBCAT 328 STK# 211357A1, 346 HRS, INCLUDES FREMAR VINYL CAB, HYDRAULIC THUMB, 12 AND 24" BUCKETS................................................................................................................$26,000� ARTICULATED DUMP TRUCKS2003 250D STK# 479700, 3765 HRS, 25 TON ARTICULATED DUMP TRUCK ................................$160,0002005 250D STK# 523545, 2293 HRS, 25 TON ARTICULATED DUMP TRUCK ................................$188,0002003 300D STK# 479697, 4595 HRS, 30 TON ARTICULATED DUMP TRUCK ................................$183,0002005 300D STK# 548659, 2334 HRS, 30 TON ARTICULATED DUMP TRUCK ................................$260,0002004 350D STK# 508716, 4847 HRS, 35 TON ARTICULATED DUMP TRUCK ................................$239,0002004 350D STK# 507390, 3293 HRS, 35 TON ARTICULATED DUMP TRUCK ................................$310,0002003 400D STK# 492376, 5282 HRS, 40 TON ARTICULATED DUMP TRUCK ................................$290,0002005 400D STK# 538800, 3351 HRS, 40 TON ARTICULATED DUMP TRUCK ................................$375,0002000 400C STK# 398341, 6211 HRS, 40 TON ARTICULATED DUMP TRUCK.................................$140,0002002 400C STK# 450568, 7800 HRS, 40 TON ARTICULATED DUMP TRUCK ................................$150,000� FOUR WHEEL DRIVE LOADERS1999 544H STK# 574410A1, 3144 HRS, GOOD LOADER FOR SNOW!!!...........................................$58,5002004 744J STK# 593622A1, 5241 HRS, LOADED WITH OPTIONS, INCLUDES JRB COUPLER AND 5.25 YARD COUPLER BUCKET....................................................................................................$185,0002006 844J STK# 604750, 2864 HRS, INCLUDES 7.25 YARD PIN-ON GENERAL PURPOSE BUCKET, VERY CLEAN...........................................................................................................................$289,000� INDECO BREAKERS/OTHER EQUIPMENT2004 MES650SP STK# 24838, N/A HRS, 1,000 FOOT POUNDS...........................................................$4,0002002 MES1500HD STK# 262, N/A HRS, 1,750 FOOT POUNDS ............................................................$5,0002002 MES1500HD STK# 264, N/A HRS, 1,750 FOOT POUNDS ............................................................$5,0002005 HP2000 STK# 2136, N/A HRS, 2,000 FOOT POUNDS.................................................................$26,0002001 MES1750HD STK# 1694, N/A HRS, 2,000 FOOT POUNDS ..........................................................$4,5002004 MES2000HD STK# 1082, N/A HRS, 3,000 FOOT POUNDS ..........................................................$9,9002003 MES2000HD STK# 983, N/A HRS, 3,000 FOOT POUNDS ............................................................$7,5002003 MES2000HD STK# 987, N/A HRS, 3,000 FOOT POUNDS ..........................................................$10,0002005 HP5500 STK# 6702D, N/A HRS, 5,500 FOOT POUNDS..............................................................$27,0002004 MES4000HD STK# 283, N/A HRS, 6,000 FOOT POUNDS ..........................................................$18,0002003 MES5000HD STK# 1425, N/A HRS, 7,500 FOOT POUNDS ........................................................$45,0002002 MES7000HD STK# 183, N/A HRS, 10,000 FOOT POUNDS ........................................................$55,0002005 INTENSUS CV80D ROLLER STK# 5D0023A1, 709 HRS, LOW HOURS AND IN VERY GOODCONDITION ...................................................................................................................PRICE UPON REQUEST 1973 JOHN DEERE 570A GRADER STK# 616881A1, N/A HRS, VERY GOOD CONDITION, NEWENGINE JUST RECENTLY INSTALLED!..................................................................................................$24,500**PLEASE BE AWARE ANY OF THESE MACHINES MAY BE ON LONG TERM RENTALS.

Keith PriceFairfield, NJ 070041275 Bloomfield Ave

PH 973-227-2221 or 800-321-8080FX 973-575-5553

WEB www.jesco.us

Emilio PescatoreLumberton, NJ 08048

1790 Route 38PH 609-267-2020 or 888-217-0600

FX 609-261-8559WEB www.jesco.us

Anthony FalzaranoS. Plainfield, NJ 07080

118 St Nicholas AvePH 908-753-8080 or 800-241-7070

FX 908-753-7853WEB www.jesco.us

Used Equipment ShowcaseFeaturedEquipment

Come Visit Us

at the John Deere

Booth at Con Expo

in Las Vegas


Insist On HonestyIn Business &Government

BECK EQUIPMENTTelephone Toll-Free (866) 455-6333 - Fax (607) 749-5640

2090 Preble Road - Preble, NY 13141 (20 Miles South of Syracuse)

Photos of Most Machinery can be seen @ www.BeckEquipment.comE-mail: [email protected]

PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE

2000 CAT TH83, #3827, ROPS, 4X4,Telehandler with Frt Stabilizers, 48" forks, 5351Hrs, 8,000# Cap, 3 Steer Option, 3rd Valve,17.5x25 12 Ply Goodyear Tires, 7/06 Painted byBeck’s ..................................................................Rent $2,000/Mo...............................$53,500

1996 CAT 953C #3757, 0ROPS, Heater,Hystat, 2.5 Cu Yd, GP Bkt w/8 teeth, Segments,20" DBG, 5257 Hrs, U/C 50% ..............$69,500

1984 CAT 980C, #3321, EROPS, Hrs NotAccurate, 6 Yd GP Bucket, @ 12,500 hrs– NewBottom Pins & Collets, NEW 29.5x25 L-3 Rock 28ply Tires, May 05 @ 13552 hrs. – Rebuilt Tran., 13'top of ROPS, 12' 4" Top of Cab, 11' 1" OS Bucket ..........................................................$75,000

2002 CAT 321B LCR, #3905, 1700 Hrs,(Not Accurate), Cab, A/C, 9'8" Stick, 32" TBG(10'6") HeavyRent $4,500/Mo ..............................$114,500

I-R DD110HF #3909 ..............Rent $4,500/Mo

Plenty of Buckets AvailableNEW, USED, REBUILT &

TAKE-OFFS HERE AT BECK’S

Don’t Let a LittleSnow Stop YouFrom Calling!

GOOD USED “RENTAL READY” EQUIPMENT ATBECK’S, WAITING ON THE READY LINE

2002 CAT 315CL #3880, Cab, A/C, EngPrelube, Small Aux Lines, Pat Changer, 24" TBG,10'2" Stick, 2534 Hrs, U/C 80%, 36" Bkt AvailRent $3,900/Mo..................................$89,500

1999 BADGER1085C CRUZ-AIR, #3355, 6335Hrs,@ 5923 Hrs-New 17.5-25Tires, Ext-a-Hoe,Wrist-o-TwistRent$4,500/Mo............$49,500

SCRAPERSFor Sale or Rent

All Reasonable Offers Considered!

WE HAVE BIG EXCAVATORS “WORK

READY” FOR RENTAL ORFOR SALE

322BL345BL& 350

2000 CAT IT28G #3746, 4611 Hrs, EROPS,A/C, 2.5 Cu Yd Bkt, CWT, 20.5X25 Tire....................Rent $3,600/Mo. . ....................................$100,000

2003 VIBROMAX W1105D, #3940, ROPS,84" Smooth Drum Drive Vib Roller, 5.9 CumminsDiesel, High-Low Vibration, Drum Scrapers, 2Speed Travel, 23.1X26 12 Ply GoodYear Tires,1451 Hrs ...............................................................Rent $3,300/Mo ................................$65,000

(2) 1974 Terex TS14B’s, #1701 & #1702,OROPS, Push Pull, Reconditioned, Transmission& Brakes Have Been Rebuilt .........................................................$45,000 Each or Best Offer

Insist On Honesty InBusiness & Government

Sales • Rentals • Parts

RUTLAND,VT 802-773-5926We sell used heavy equipment parts.

CAT • DEERE • KOMATSU • HITACHI • DRESSER

Recent Machines in for Dismantling:

Call forSavings!!

• John Deere 120• CAT 769• Dresser 515

• (2) Koehring 4475• Linkbelt 3400

We are looking to purchase all types of salvage machines.We are looking to buy Cat D8's and D9's, Cat 950's and 966's.

Current Inventory for Sale• (2) 2000 JCB 130 Hydraulic Excavator ............................................$33,500 Each• 2000 Hitachi 120-5 Hydraulic Excavator ..................................................$34,500• 1994 Volvo L180 Wheel Loader, Cleaned and Painted, Runs Excellent ....$33,500• (2) 2005 CAT 725 Artic Trucks, Low hours, Great Trucks............................P.O.R.• (2) 2005 CAT 330CL, Long and Wide, A/C, Low Hours ..............................P.O.R.• (2) Yanmar 75 Hydraulic Excavators, 200 Hours, Steel Track Blade, Aux. Hyd., A/C,As New..............................................................................................$66,500 Each• Yanmar 35, Full Cab, Steel Blade, 300 Hours ............................................$33,500

This is just a partial list. If you don't see it, call! We rent machines in Northern New England and upstate New York.


Las Vegas Reinvents Itself by Razing Past, Building Anewgone.”

That’s not to say that mass demo is theonly demo industry in Las Vegas. In a townwhere guest rooms are remodeled every fiveyears, a town built smack in the middle ofthe desert, demolition is involved in con-tracting from the very beginning,Association of General Contractors LasVegas Executive Director Steve Hollowaysays.

“There’s two types here in Las Vegas. Oneis the demolition of buildings and the other isthe preparation for the ground,” he explains.“There’s a lot of caliche in the ground, a nat-ural cement, but it’s harder than cement. It’sa compound, a mineral compound that’svery hard, and it comes in veins, and it’s verydifficult to get out with equipment.”

In an irony of beginnings and endings, ofashes to ashes and caliche to dust, it is, as itis so often in Vegas, the best solution to blast.

“The best way of doing it is to blast it firstand break it up into smaller chunks, andthere’s a lot of that in different areas of LasVegas,” Holloway says. “There’s basicallyseveral different types of ground, soil types,in the valley, and there’s a high caliche in allof them. It’s very difficult to remove and youdon’t want to build a building over it whereit’s at unless you want to clear it out.”

Diversified’s Mercurio says the industryis stratified to some extent.

“There are several companies, and somehave custom-tailored themselves to do, say,selective interior work, and they wouldn’t bebidding on mass demolition or high-rises,”he notes.

Goldstrum’s memories of the early daysof demolition work in Las Vegas count moreon the sheer exhausting volume of the workin the tight timeframes allotted. He and hisfour-man operation, he says, set personalgoals for moving heroic loads of materialeach day.

“If you do it quick you’ll get the moneyand run in good shape. If you do it in a week

and someone else does it in a month,” hesuggests.

“Everything you have done here, it’s like:have it done today, not tomorrow — it has tobe today ‘cause we start building tomorrow,”he laughs. “Somewhere else you get all thetime in the world. It’s like the Dunes: Icleaned it up in 30 days. That really pleasedSteve Wynn.”

Wynn, Loizeaux Usher In New Era

With the demolition of the Dunes’ Northtower in 1993 everything changed, changedfast. Again, developer Steve Wynn wasinstrumental, and it marked the beginning ofa new era, one ushered in by a family from

back east, the legendary Loizeauxes.For three generations the Loizeauxes and

their Phoenix, Md.-based ControlledDemolition Inc. have raised demolition to anart. Their arrival on the Las Vegas demoli-tion scene raised implosion to performanceart.

“When we did the first Dunes with theLoizeauxes people thought they’d throw thewindows 10 blocks,” Goldstrum says. “Hestands there and tells them he did this and didthat, and when the first one in town droppedthey thought that was the big thing.Everybody wanted to see all the towersdropped.”

At 10:12 p.m. on Oct. 27, 1993, an esti-mated 250,000 spectators saw what Wynn

demanded be “the most incredible implosionever.” The 22-story reinforced concretenorthern tower fell to 365 lbs. of explosivesin a choreographed cacophony of specialeffects charges and aviation fuel following asix-minute professional fireworks display.

Since then, the family has done 16 implo-sions in the city. The Stardust and theFrontier are among the most recent. CDIPresident Mark Loizeaux’s the second gen-eration to lead the company. He says CDI’sstrength is in the trust and reliability his com-pany has forged over the years.

“The requirements of Clark County areonerous with regard to engineering detail,pre-planning, submittals, clarity and prompt-ness of communications and the absoluterequirement that contractors do what theysay they’re going to do when a projectmoves from the planning stage into the per-formance phase,” he says.

“Local property owners and contractorsoperating in the Clark County/Las Vegasmarket know that CDI has consistently, onevery project, kept its promises to not onlyour clients, but also the property owners,adjacent property owners and regulatoryagencies. They know that if CDI says it cando the job from a technical standpoint, thetrack record and level of confidence and trustfrom the next door neighbors, who CDI hasprobably worked for previously over thepast 15 years, and regulatory agencies willensure that the project will be permitted andperformed on the tight schedules required inthe aggressive Las Vegas market.”

The challenges of implosions haverequired special considerations for contrac-tors, according to LVI Environmental ofNevada President Joe Catania.

Catania and LVI have been a part of thedemo industry in Las Vegas’ modern erasince the beginning, 1992, working on someof the biggest jobs on the strip: the Sands, theLandmark, the Aladdin, the El Ranchero andthe Augusta Tower at the Desert Inn. His

see VEGAS page 24

VEGAS from page 10

Opened in 1980 as the Shenandoah, Bourbon Street Hotel and Casino was demol-ished in 2006.

Demolitions in Vegas usually make for a good show, as seen by the pyrotechnics display just before the Frontier came tumbling down.


If you think you know Hyundai, think again. Power, precision, productivity,

quality – and value. You get it all in each model. That is today’s Hyundai.

Get smart. Think Hyundai.

See for yourself at CONEXPO-CON/AGG 2008 booth #N1341.

Think again. Think Hyundai.

We

bu

ild a

be

tter fu

ture

www.hyundai-ce.com

Get the best warranty in the industry:

Hyundai’s 2-year / 2,000-hour warranty

Experience the bestvalues in construction

equipment. Stop byyour local Hyundai

dealer today.

Visit our Website:www.hyundai-ce.com

For the DealerNearest You.

Please Visit Our Booth

in the North Hall

Booth # N1341


Call Gary or Wendy Today

866-400-5250Value Priced • Quality Equipment

For more details on our used equipment visitwww.roadmachinery.com/equipment

Komatsu Distributor

www.roadmachinery.com/equipment

2000 KOMATSU PC128UU-2, Stk# 12157, 5404 hours, Cab w/Air,offset boom........................................................................$64,900

2006 KOMATSU BR550JG-1, Stk# 11380, 803 hours, MagnetSeparator, Muck Conveyor, Remote Control ............................$555,000

2005 KOMATSU PC300LC-7, Stk# 10416, 1912 hours, 10'3" MedArm, 30" Tracks, Cab w/ A/C ............................................$175,000

2006 KOMATSU WA470-5, Stk# 10023, 782 hours, ROPS Cabw/AC, GP Bkt w/teeth, Ltd. Slip Differential......................$219,000

2006 KOMATSU D275AX-5, Stk# 11685, 1944 hours, Cab w/Air, SUBlade & Single Shank Ripper....................................................$465,000

2003 KOMATSU GD655-3C, Stk# 12200, 3222 hours, Cab w/Air,Scarifier ............................................................................$119,500

2005 KOMATSU PC200LC-7, Stk# 9449, 2060 hours, 18'18"Boom, 9'7" HD Arm, A/C, 31.7" Tracks ............................$108,000

2005 KOMATSU PC400LC-7, Stk# 9883, 3131 hours, Cab w/AC ..........................................................................................$259,000

1998 KOMATSU WA380-3, Stk# 9569, 7246 hours, ROPS, Cab w/A/C, GP BUCKET w/ BO Teeth ............................................$85,000

Miscellaneous Year STK# Hours PriceKomatsu BR550JG-1 2006 11380 867 $555,000Komatsu D65E-12 2001 12234 2794 $99,500Komatsu D61EX-15 2006 12272 1052 $144,900Komatsu D61EX-12 2004 11997 2642 $109,500Komatsu D155AX-5 2006 12187 426 $375,000Komatsu D275AX-5EO 2006 11685 1944 $465,000Komatsu GD655-3C 2003 12200 3222 $119,500

Crawler Excavators Year STK# Hours PriceKomatsu PC120-6EO 2003 12274 1896 $72,500Komatsu PC128UU-2 2000 12157 5404 $64,900Komatsu PC128UU-2 2000 12158 4624 $64,900Komatsu PC138USLC-2 2004 11917 3791 $69,900Komatsu PC138US-2 2001 12035 3611 $59,900Komatsu PC200-8 2006 11167 564 $125,000Komatsu PC200LC-7 2005 11166 943 $124,500Komatsu PC200LC-7 2005 11172 1007 $131,000Komatsu PC200LC-7 2005 11171 1019 $131,000Komatsu PC200LC-7 2005 11170 966 $129,500Komatsu PC200LC-7 2005 10870 704 $99,000Komatus PC200LC-7 2005 9592 1284 $118,000Komatsu PC200LC-7 2005 9449 2060 $108,000Komatsu PC200LC-7 2005 9448 1768 $95,000Komatsu PC200-7 2004 11168 1222 $114,500Komatsu PC200-7 2004 11169 681 $114,500Komatsu PC200-7 2004 10864 2168 $97,500Komatsu PC228US-3 2003 10865 2511 $99,500Komatsu PC300LC-7 2006 11292 202 $225,000Komatsu PC300LC-7 2005 11163 1400 $199,000Komatsu PC300LC-7 2005 11165 1212 $209,000Komatsu PC300LC-7 2005 10416 1915 $175,000Komatsu PC300LC-7 2004 11837 4457 $147,500Komatsu PC400LC-7 2005 9883 3131 $259,000Komatsu PC400LC-7 2005 11162 3230 $282,500Komatsu PC450LC-7 2005 9593 3120 $275,000Komatsu PC750LC-7 2005 9293 1990 $449,000

Wheel Loaders Year STK# Hours PriceKomatsu WA380-5 2006 9790 858 $165,000Komatsu WA380-5 2003 10867 4922 $119,500Komatsu WA380-5 2003 8584 5166 $110,000Komatsu WA380-3L 1998 12145 12289 $59,900Komatsu WA380-3 1998 9569 7246 $85,000Komatsu WA470-5 2006 10023 856 $219,000Komatsu WA470-5 2005 9594 1203 $235,000Komatsu WA480-5 2005 11776 5769 $169,000Komatsu WA500-3LK 2005 12229 7113 $215,000Komatsu WA500-3LK 2005 12249 6115 $215,000

ArizonaPhoenix602-252-7121Prescot928-778-5621Tucson520-623-8681

New MexicoAlbuquerque505-345-8383Farmington505-324-8601

TexasEl Paso915-872-1001

CaliforniaSouthern CaliforniaLos Angeles, Orange,Riverside, San Bernardino andVentura Counties909-355-3600

MexicoCananea, Sonora011-52-645-3328300

Corporate Headquarters716 South 7th StreetPhoenix, AZ 85034Phone: 602-252-7121Fax: 602-253-9690www.roadmachinery.com

All certified machines include a minimum of 30 days powertrain warranty. All certifiedmachines include the following financing (OAC). Subject to change without notice. 12 Months - 3.5% • 24 Months - 4.5% • 36 Months - 5.5% • 48 Months - 6.5%

Komatsu Remarketing Certified Used Equipment

For all other inquiriescontact your local branch

Used Equipment InquiriesContactGary Beal

Vice President of Used Equipment

[email protected]

ContactWendy Schwertley

Used Equipment Coordinator602-256-5189wschwertley@

roadmachinery.com


See us at ConExpo in the Roman Tower of Caesar’s Palace


Broce Broom Is The Leader In The Mid-mount Sweeper Market! Over 11,000 Model 250 and 350 Units Have Been Sold To SatisfiedCustomers Worldwide

www.brocebroom.com

Now OffersThe MK 1

Transfer Sweeper!The MK 1 is designed to travel behind a milling machine where it willsweep, pickup and transfer in one pass, any loose materials into a waitingtruck. All this is accomplished in one continuous operation; thus, allow-ing the paving crew to finish the job in one “mill & fill” operation!

The MK 1 has also been very successful in chip-seal operations to recoverexcess materials that must be removed immediately after placement.

View our website video at www.brocebroom.com

MK 1 Transfer Sweeper

While atConExpo, visit

our outsideBooth # S796B

Model350

Model350

Model250

Model250

Contact:Terry Wimer – [email protected]

Jim Cornelsen, Sales Mgr. – [email protected]

Toll Free: 1-866-579-2488

2007 Top Ten 350 Dealers

Dealer StateR.B. Everett TXSoutheastern OHCowin AL/GAFlagler FLPower COCooper TXHoward/Mc TXKirby/Smith OKPower TNTubb MS


(877) 362-2001 • www.dresstanorthamerica.com

Extra PowerExtra PerformanceDressta’s new TD-40E Extra delivers!

Extra PowerExtra PerformanceDressta’s new TD-40E Extra delivers!

From construction and mining to hot slag and coalhandling, the new TD-40E Extra dozer provides thepower and performance you need for your mostdemanding applications.• 515 HP Tier 3 engine / 137,000 lbs. operating weight• 24.3 - 29.8 cu. yd. blade capacities• Exclusive two-speed steering for power to both

tracks in turns• Modular powertrain for easy access and servicing

Time-Proven Performance

Milford, NH(800) 698-2640

Brentwood, NH(800) 616-5666

www.ChappellTractor.com

22000044 CCAATTEERRPPIILLLLAARR 330044CCRR S/N: NAD01424, 2146 Hrs.............$$3322,,550000

11999955 CCAATTEERRPPIILLLLAARR 331111 S/N: 5PK01912, 7627 Hrs...................$$3322,,550000

11999999 CCAATTEERRPPIILLLLAARR 331122BBLL S/N: 8JR01294, 4758 Hrs ..............$$4444,,990000

11999977 HHYYUUNNDDAAII 336600 LLCC--33 S/N: 10079...........................................$$6677,,000000

HHYYUUNNDDAAII 445500 LLCC--33 S/N: 11002.....................................................$$6699,,990000

22000011 HHYYUUNNDDAAII RROOBBEEXX 116600 LLCC--33 S/N: E0379, 7530 Hrs...........$$4444,,990000

22000000 HHYYUUNNDDAAII RROOBBEEXX 116600 LLCC--33 S/N: 10327, 4556 Hrs...........$$4455,,000000

22000055 HHYYUUNNDDAAII HHLL774400TTMM--77 S/N: LF0210189, 1723 Hrs...........$$7766,,550000

22000000 HHYYUUNNDDAAII HHLL776600--33 S/N: L404GE11297..............................$$5599,,550000

11999944 KKOOBBEELLCCOO SSKK6600 IIIIII S/N: YPU0760, 3551 Hrs.....................$$2211,,990000

22000044 LLIINNKK--BBEELLTT 7755 SSPPIINN AACCEE S/N: EAAJ47561, 1151 Hrs.......$$8855,,990000

22000055 LLIINNKK--BBEELLTT 113355MMSSRR S/N: EBAU6-0655, 920 Hrs ..............$$9900,,000000

22000055 LLIINNKK--BBEELLTT 221100LLXX S/N: K3J5-9574, 952 Hrs....................$$111122,,550000

22000066 LLIINNKK--BBEELLTT 221100 LLXX S/N: K3J60614, 2077 Hrs....................$$9944,,550000

22000011 MMUUSSTTAANNGG MMEE66000022 S/N: AA04892, 3100 Hrs ...................$$2299,,550000

22000022 NNEEWW HHOOLLLLAANNDD EECC221155 S/N: 721636...................................$$5555,,000000

22000044 TTAAKKEEUUCCHHII TTBB117755 S/N: 17512797, 804 Hrs........................$$5577,,550000

22000055 TTAAKKEEUUCCHHII TTBB5533FFRR S/N: 15810960, 649 Hrs.....................$$4499,,550000

11999988 DDRREESSSSEERR TTDD88HH S/N: P036309, 1595 Hrs..........................$$4444,,990000

22000000 NNEEWW HHOOLLLLAANNDD DDCC8800 S/N: 13141084, 1699 Hrs..............$$4499,,990000

22000000 NNEEWW HHOOLLLLAANNDD DDCC8800 S/N: 13141028................................$$2299,,550000

22000022 HHYYUUNNDDAAII RROOBBEEXX 5555--33 S/N: MC0311506, 1313 Hrs........$$3355,,000000

11999966 FFOORRDD 555555DD S/N: A438159, 6566 Hrs .................................$$2288,,990000

JJOOHHNN DDEEEERREE 331100SSEE S/N: 884912 .................................................$$3322,,550000

11999977 NNEEWW HHOOLLLLAANNDD 667755EE S/N: 31003587, 4360 Hrs ..............$$3377,,000000

22000011 NNEEWW HHOOLLLLAANNDD LLBB7755BB S/N: 31030497, 3582 Hrs............$$3333,,550000

11999966 BBEELLLL BB2255BB S/N: BAJ1696.....................................................$$4499,,990000

11999999 TTEERREEXX TTAA2255 S/N: A7581153.................................................$$7755,,000000

11999966 TTEERREEXX 22776666CC S/N: A531050 ................................................$$3399,,990000

11997766 CCAATT 992200 S/N: 62K07698, 5687 Hrs......................................$$1199,,990000

11998888 CCAATT 992266EE S/N: 4NB02248, 16589 Hrs.................................$$2277,,990000

11998899 FFIIAATTAALLLLIISS FFRR1100BB S/N: 78Y00318 .......................................$$1111,,990000

KKOOMMAATTSSUU WWAA118800

––––– WHEEL LOADERS –––––

––––– OFF-HIGHWAY TRUCKS –––––

––––– LOADER BACKHOES –––––

––––– MINI EXCAVATORS (up to 12,000 lbs) –––––

––––– CRAWLER DOZERS –––––––––– CRAWLER EXCAVATORS –––––

When It Comes to Excavators, You Only Need To Know One Thing...

Who Your Nearest Link-Belt Dealer Is!

210X2157 hp - 47,400 lbs.

Featured Used Equipment


Third-Generation CDI’s Implosion Tally Reaches 16 in Vegaswork on the most notable jobs in the cityextends to the present, having worked on theStardust in 2007.

“Especially when you do an implosion,it’s a major dust event right there on LasVegas Boulevard,” he says. “We’ve beencommended from the Clark County PublicWorks Department and the county supervi-sors because we took extra-special precau-tions. We take the extra step to make sure thecommunity isn’t impacted any more than ithas to be. We take major steps every time wehave one happen. At the Stardust we hadover 100 men standing by, and when theimplosion happened they went right to workcleaning up the streets.”

Clauss worked with the Loizeauxes ontheir most recent implosion, the Frontier inNovember 2007. The landmark was the sec-ond resort to open in Las Vegas in 1942, issaid to be the first venue to host a youngrocker named Elvis Presley and was, overthe years, the New Frontier, the Last Frontierand simply the Frontier.

“It’s an experience,” he says. “[TheLoizeauxes] are very very intelligent aboutwhat they do and are great people. Implosionis a family business for them, and Clauss is afamily-based company as well. TheLoizeauxes and CDI have the same type ofwork ethic that we do and through doing thatwe all became one family, if you ask me.They’re great people.”

Loizeaux’s focus is squarely planted onthe technical aspects of making a buildingfall in on itself. He said Las Vegas structurespresent issues because of the way they werebuilt.

“There is a form of high-rise constructionwhich, in CDI’s experience, is unique to LasVegas. Solid-filled, reinforced concreteblock construction, reinforced concretemasonry unit — or CMU — has been takenup to 18 stories on buildings where CDI hasbeen asked to implode structures,” heexplains. “The St. Andrews Tower at DesertInn, the El Rancho, the Hacienda and theFrontier Hotel have all been examples of thisconstruction method where CDI had todevelop completely new methods to notonly bring the structures down but controlthem dynamically during progressive fail-ure.”

ACDI handout on the Landmark’s implo-sion goes into detail about the challenges ofcollapsing a building in its own footprint.The building, once home to HowardHughes, featured a rotating restaurantframed in structural steel at its uppermostlevel. CDI’s structural assessment indicatedthat the tower’s front half would fail, shear-ing from its back half. Implosion couldthreaten the nearby junction of ParadiseRoad and Convention Center Drive.

In genuine Las Vegas style, theLoizeauxes innovated.

CDI developed a delay pattern thatallowed the front half of the structure to col-lapse at different levels as it reached grade.The rear half of the structure remained at fullheight until a notch in the direction of fall atthe bottom created the eccentric load androtational movement that moved both halvesof the structure toward the fall area.

“There are extreme challenges, No. 1being the surrounding properties during animplosion,” Clauss says. “You’re dealingwith guys like Steve Wynn and, of course,the client. Another site was the Frontier.When we took it down it was our duty tokeep Wynn’s property clean during theimplosion. One thing you can’t control is thedust cloud, but as far as protecting the prop-erties for the implosion, between us andLoizeauxes we know how to do that: keep-ing them happy as far as educating themabout the implosion process — everybodywas thinking windows would fall out of thebuilding — it’s a pretty large task to bringpeople into their comfort zone and educatepeople.”

The process, though quick, is intense. “Once the project goes hot, CDI is usual-

ly involved for three to six months prior tothe implosion, depending on the complexityof the project,” Loizeaux says. “Actualimplosion preparation usually only takes amatter of weeks, and CDI likes to perform itsown drilling operations as the placement ofexplosives into the holes to be loaded isabsolutely critical to the success of CDI’sprojects.”

And in Las Vegas, Loizeaux admits, theshow is always a factor.

“CDI needs to walk a fine line whendemolishing structures with so much histo-ry,” he says. “There is automatically a lot ofnational and international media attentionwith regard to these properties, and CDIworks closely with our client and the proper-ty owner to give the demolition of thesestructures the most positive spin possible. Infact, property owners frequently take advan-tage of the natural media attention surround-ing their properties to promote new proper-ties.”

When the implosions began, the industrychanged, and today it’s got every mark of the

city that it calls home.

Cheapest, Fastest Wins“It’s terribly competitive here now.

Everyone’s got the idea now to come in hereand do a job and be the hero and get all therest of it, but wherever the cheapest cat iswins — that’s the whole deal. You’ve got toinvent a new mousetrap every time you get ajob. You’ve got to invent something new soyou can beat the competition so you can doit for a lot cheaper in some way,” saysGoldstrum.

Seasoned veteran Goldstrum has seen theindustry grow into a hard one to navigate.His four-man operation has given way to ademolition industry that’s made to order forLas Vegas property-owners.

“I took a proposal to Steve Wynn one time— it was so much price and two weeks. Hedoubled the price and said ‘How ‘bout oneweek.’And I took it,” he laughs.

“Demolition here has been thriving foryears,” LVI’s Catania says. “There’s alwayssomething to demolish, whether it’s a build-ing or inside the hotels. In Las Vegas placesare always reinventing themselves, changingconstantly. If it’s not tearing one down it’sinside the building, tearing down the oldrestaurant and putting in a new one.”

It’s the kind of crucible that forges a styleof demolition contractor other places can’tcontain.

“This is the kind of town that time is of theessence. Either it’s a lost revenue situation orit means having the restaurant down or it’llimpact gaming. Most of the work there isfast-track,” Diversified’s Mercurio says.“Fortunately for us, we kind of cut our teethin this environment. It’s how we’ve devel-oped our whole business. Some other mar-kets that we go into we take some of thatinto. We take the same fast-track approachesto jobs in other areas. It’s the way our per-sonnel are trained. It’s a fine line. Safety isone of the most important issues for us as acompany, so safety drives everything. Iguess you could use the term ‘work safe andfast.’”

Mercurio says demolition in Las Vegasstands out in more than one way.

“From a couple of different perspectivesthere’s some uniqueness to these propertiesin Las Vegas,” he says. “They’re just enor-mous in size, three or four thousand guestrooms on the property, casinos that cover lit-erally acres of ground all under-roof.”

And where time means money, demoli-tion is challenged.

“Logistically, the properties don’t likeshutting anything down, and the propertydoesn’t want us to obstruct guests registeringat the desk,” Mercurio says. “A lot of work-ing on the job is that sometimes it’s not a

see VEGAS page 30

VEGAS from page 18

Clauss Construction cleans up the remnants of the Frontier, which was demol-ished in 2007.


Asphalt / Paving / Concrete Equipment1997 LEEBOY 1000B, S/N 1754B, 2487 Hrs..............................................................................$12,5001998 REMAX 4000, S/N 99312636C, 150 Hrs ..............................................................................$38,500

Compaction Equipment - Smooth Drum2004 BOMAG BW145D-3, S/N 211090, 531 Hrs ......................................................................$42,500

2004 BOMAG BW177DH-3, S/N 901581531003,497 Hrs ......................................................$67,0002004 BOMAG BW213D-3, S/N 901580861099,1981 Hrs ....................................................$67,0001985 DYNAPAC CC10, S/N 586397, 2716 Hrs ............................................................................$4,5001997 HYPAC C778B, S/N B215C1601U, 6320 Hrs....................................................................$25,0002005 HYPAC C784A, S/N 901635, 1029 Hrs ..........................................................................$142,6001999 INGERSOLL-RAND DD32, S/N 161216, 4617Hrs ..............................................................$11,5002000 STONE SD66, S/N R866SC3700180, 580Hrs ..............................................................$36,0002000 WACKER RD11A, S/N 5018505, 1 Hr ................................................................................$6,750

Crawler Loaders1995 DEERE 555G IV, S/N 808425, 5030 Hrs............................................................................$41,3002002 DEERE 655C, S/N LV655CX005679, 4242Hrs ............................................................$100,000

2001 DEERE 655C, S/N 05156 3505 Hrs ................................................................................$110,0002004 DEERE 655C II, S/N 007398, 300 Hrs ............................................................................$153,000

2004 DEERE 755C, S/N 006933, 3682 Hrs..............................................................................$145,0002003 DEERE 755C, S/N 006448, 4500 Hrs..............................................................................$140,000

Motor Grader2005 NORAM 65E, S/N 65ET9130, 112 Hrs ............................................................................$105,000

Scraper1983 CATERPILLAR 637D, S/N 27W1629, 0 Hrs ......................................................................$90,0001981 CATERPILLAR 637D, S/N 26W00524, 0 Hrs....................................................................$90,0001978 CATERPILLAR 637D, S/N 27W010563, 0 Hrs....................................................................$90,0001978 CATERPILLAR 637D, S/N 27W01066,19,000 Hrs ..................................................$90,0001978 CATERPILLAR 637D, S/N 27W00783, 0 Hrs....................................................................$90,0001970 DEERE 760A, S/N 027860R, 6113 Hrs ............................................................................$19,500 1969 DEERE 760A, S/N 025626R, 5200 Hrs ............................................................................$19,500

Off-Highway Truck2000 DEERE 350C, S/N 200218, 5513 Hrs..............................................................................$145,000

Dozer - Crawler1992 CATERPILLAR D9N, S/N 1JD03357, 102,225Hrs ............................................................$130,0001999 DEERE 550H LT, S/N 886164 2118..$70,0002003 DEERE 650H LGP, S/N 922169, 7328 Hrs ........................................................................$68,5002003 DEERE 650H LT, S/N 913017, 8102 Hrs ..........................................................................$62,000

2005 DEERE 650J LGP, S/N TO650JX108177,1522 Hrs ..................................................$104,5002003 DEERE 700H LT, S/N 917018, 4114 Hrs ..........................................................................$94,0001988 DEERE 750B, S/N TO750BF742877, 3842Hrs ..............................................................$45,0001996 DEERE 750C, S/N 820351, 5200 Hrs$78,0001997 DEERE 750C LGP I, S/N TO750C836281,6080 Hrs ....................................................$65,000

1999 DEERE 750C LT, S/N 879890, 4774 Hrs ..........................................................................$95,0001997 DEERE 850C WT, S/N 850CX828912, 4836Hrs ..............................................................$85,0002005 DEERE 1050C, S/N LU1050C007560, 1086Hrs ............................................................$339,0001999 KOMATSU D475A-2, S/N 10462, 15,176 Hrs..................................................................$330,0001998 KOMATSU D475A-2, S/N 10445, 19,729 Hrs..................................................................$310,000

Excavator - Crawler1995 CATERPILLAR 350L, S/N 3ML00645, 14,000Hrs ..............................................................$75,0002001 DEERE 160 LC, S/N 041762, 9448 Hrs ............................................................................$52,0001998 DEERE 160 LC, S/N 040369, 9190 Hrs ............................................................................$58,000

1997 DEERE 200 LC, S/N FF0200X050260, 9090Hrs ..............................................................$45,0002002 DEERE 200C LC, S/N 503121, 300 Hrs............................................................................$101,000

2005 DEERE 225C RTS, S/N FF225CX500406,1427 Hrs ..................................................$155,0002005 DEERE 230C LC, S/N CX604085, 1095 Hrs ....................................................................$149,5001999 DEERE 330 LC, S/N 80410, 5800 Hrs ............................................................................$115,0001999 DEERE 330 LC, S/N 080349, 8433 Hrs............................................................................$110,000

2004 DEERE 330C LC, S/N 82924, 3407 Hrs............................................................................$200,000

2003 DEERE 330C LC, S/N FF330CX082287, 6291Hrs ............................................................$135,000 2000 DEERE 330C LC, S/N 82077, 7465 Hrs............................................................................$125,000

2000 DEERE 450 LC, S/N 90498, 7760 Hrs ............................................................................$140,0001999 DEERE 450 LC, S/N 090430, 8757 Hrs............................................................................$135,000

2005 HITACHI ZX200 LC, S/N ARH310501, 2487Hrs ............................................................$115,000

Forklift - Telescopic2004 MUSTANG 634, S/N 634JV870126, 1697Hrs ..............................................................$38,500

Loader Backhoe1998 DEERE 310S, S/N 849056, 1917 Hrs$38,000

2002 DEERE 310SG, S/N TO310SG905146, 3632Hrs ..............................................................$45,3002006 DEERE 410G, S/N 952485, 890 Hrs $72,5002002 DEERE 410G, S/N 907253, 2040 Hrs$47,0002002 DEERE 410G, S/N 907663, 2890 Hrs$44,0002001 DEERE 410G, S/N 897346, 2507 Hrs$41,0001998 DEERE 710D, S/N 840926, 5560 Hrs$54,4002005 DEERE 710G, S/N 948413, 1103 Hrs..............................................................................$125,000

Skid Steer2002 MUSTANG 2095, S/N 101206, 720 Hrs ............................................................................$25,0002002 MUSTANG 2095, S/N 101242, 585 Hrs ............................................................................$25,0002002 MUSTANG 2095, S/N 101203, 670 Hrs ............................................................................$25,0002001 MUSTANG 2095, S/N 801009, 930 Hrs ............................................................................$25,0002003 MUSTANG MTL16, S/N 21301193, 928 Hrs....................................................................$32,0002004 MUSTANG MTL20, S/N 21400330, 1392 Hrs....................................................................$35,000

2003 MUSTANG MTL25, S/N 21500816, 1573 Hrs....................................................................$46,5002002 MUSTANG MTL25, S/N 210500384, 1900Hrs ..............................................................$45,0002003 TAKEUCHI TL140, S/N 21400028, 2917 Hrs....................................................................$35,000 2004 TAKEUCHI TL150, S/N 21500788, 2539 Hrs....................................................................$26,000

Wheel Loader2005 DEERE 644J, S/N 644JX594307, 800 Hrs ......................................................................$190,000

Website:www.wests idetractorsa les .com

For Your Used Equipment Needs, Call Tom Stern at (630) 355-7150


From aerial lifts to work tools, we have what you need to get back on track in record time.

1.800.WE.R.CECO (800.937.2326)www.cashmanequipment.com

Visit Caterpillar in the North Hall N2007 or in

the Gold Lot G140.


For profitable contract crushing,

it’s the new Lokotrack LT106

As costs keep rising, it’s more important than ever to make sure your

mobile crusher gives you the best value for the money. The new

Lokotrack LT106 jaw from Metso Minerals features:

• largest possible capacity combined with easy mobility

• simple and safe to operate and maintain

• optimized crusher for low cost per ton

• reliable Metso quality with high resale value

If you want to increase the profitability of your contract crushing, see

the new LT106 mobile jaw at CONEXPO-CON/AGG 2008.

www.metsominerals.com See us at CONEXPO-CON/AGG 2008

March 11-15 • Las Vegas, NV USA

Booth No. C-5635

Introducing the new Lokotrack LT106 mobile jaw

M E T S O M I N E R A L S I N D U S T R I E S , I N C . 2 0 9 6 5 C R O S S R OA D S C I R C L E • WAU K E S H A , W I 5 3 1 8 6 P H O N E 8 0 0 5 5 8 6 8 1 8 E - M A I L M I N E R A L S . N A M @ M E T S O. CO M


Grapples,

Buckets and

Thumbs in

Stock

World’s Premier Attachment Specialist


Your New & Used, Full Service Hydraulic Hammer Dealer

REBUILT HAMMERS FROM200 LBS. TO 10,000 LBS.

� 6 MONTH WARRANTY —(from date of sale)� All Hammers include New Hoses; Seals; Chisel or Moil Point;

New Paint and OEM Decals; Final Hammer Testing OEMREPAIR FACILITY—Dallas, TX

Chisels and Moils to Fit Most Hammers

NEW & USED SALES • PARTS • SERVICE

For More InformationContact: David Spainhour800-442-4441

MIDCO DEMOLITION TOOL CO.Your AuthorizedKENT DEALERfor Sales,Parts & Service

AUTHORIZED DEALER

REFURBISHED HYDRAULIC

HAMMERSComplete Teardown

Complete Rebuild

Hot Pressure Wash Entire Unit

Polish Piston & Check Tolerances

Remove the Head Pull the Cylinder

Rebuild & ChargeAccumulator

Install All New Seals Install New Chisel & Bushings

HHooww WWee GGeett TThhii ss

FF rroomm TThhii ss

11 22

33

44 55 66 77

DEMOLITIONTOOL CO.

While at ConExpo, visit our

Booth # C-4347

Kent Air Rams a Specialty • Repairs for most hydraulic hammers • Slab busters available for all Kent hammers


Demolition Transforms Glitter Gulch Into Gleaming Citygood time of day to do what we need to do.Sometimes there is no good time to do whatwe need to do, so it’s a timing element. A lotof time there’s no good timeframe to per-form loud work. A lot of it’s doing thingswith stealth, quiet, and always ultra-clean. Alot of times there may be work two or threethousand feet into a building where youcan’t get debris into a truck or a drop box.You’ve gotta have extra people just to makesure you’re not tracking construction dustand debris on their carpets and marblefloors.”

And a sense of history goes with the terri-tory, Catania says.

“The older hotels always have a historicalvalue to them, and a lot of people are inter-ested and concerned about that, but there’snot a whole bunch we can do but do ourjob,” he said. “The Stardust probably got themost interest from people. From a historicpoint of view it’s been there for so long andit’s got so many memories. There was a lotof conversation involving that, people walk-ing by on the street sharing their own expe-riences with us. We took it to heart, butthere’s not a lot we can do once we’re con-tracted to demo it.”

Respecting the HistoryMercurio’s company takes respect for his-

tory one step further.“It is nostalgic,” he admits. “Some people

are probably more sensitive to it than others,and it depends on the name, the history of theproperty. We’ve come up with some prettyunique things, some progressive things, TheNeon Museum, for example.

“Las Vegas is famous for all of its signageand neon lights, and we get involved andpreserve a lot of that to go into this museumto be put on display, and we’ve beeninvolved in a lot of these,” he says. “Formonths when you shut down a property tothe time you actually do the demo you haveauctions, liquidators coming in and peoplecome up to get a deck of cards or an ashtrayor a coaster with the name on it. There’s a lotof nostalgia that goes with some of the morefamous properties.”

Though a young buck of the demo indus-try in the town, Clauss said the nostalgia isn’twasted on him.

“To paraphrase, it’s hard to demolish awhole city, except for Las Vegas,” Clausslaughs. “The owners out there try to keep upwith the Joneses. The life expectancy of ahotel is 10 to 15 years because they’realways building bigger and better. That’swhy we’re out there and why we continue todo what we do. It’s sad and fun at the sametime.”

“It seems like when the hotel competitionbecomes too great they blow up the hotel

and build a bigger one,” AGCLV’sHolloway says. “The other thing that’s hap-pening is that Las Vegas is growing dramat-ically. It just keeps moving out and out intothe surrounding areas. We’ve gone from 1.2million to over 2 million in just the last 10years, so the entire construction industry ishuge here. It’s the second-largest industry inthe state. We have, either from expansion ornew construction soon to be under way, $32billion in projects just on The Strip.”

If prediction is possible, one would haveto say the industry is still growing.

Just a Kiss AwayOn the Internet, in the bars and in the local

press, rumors about demolition abound. It’sa sort of communal hobby for Las Vegaslocals, guessing which structure will be thenext to receive the kiss of death.

Goldstrum isn’t above some reflectionand professional assessment. He says thethings he’s seen in his time in the industry inLas Vegas give hints toward the future.

“Most everything that’s been torn down, itseems like they put it up cheap and quickand it wasn’t really put up to stay so long,”he says. “I think they’ve got better structureslately. The first portion of the Dunes hadproblems in their structures that showedwhen they were tearing them down. Theyblew the top and some floors up there, prob-ably they were pouring the cement and itwasn’t right, and they had it all jacked up inthere and it was supposed to make it good.On the other tower it was different footings.They had a mat footing in the end with pil-lars in the center. On the top floors, the thingwas, the doors, in some places, they’d put‘em in and it’d settled I don’t know howmuch, as much as eight inches, and they

tried to compensate for that and it wasn’t agood structure. It had to come down.”

He said the business of casinos and gam-bling and the parade of operation manage-ment has taken its toll on some of the struc-tures in the area.

“What’s happened is that in all the yearsbefore it was a lot of flat structures, not real-ly high, and you’d have one operation and acertain bunch of people say ‘Well, look atthis room. Let’s strengthen it up and take onepost out and put in six more slots,’” he says.“And a few years later someone else wouldlook it over and say ‘If we can get in the ceil-ing and do some work and take out two orthree pillars here and get five or six moremachines in...’Well, that went on.”

Now, he said, property owners are prepar-ing for future improvements. He said thecasino and hotel industry is experiencing aconsolidation that might result in fewer, butbigger, hotels and casinos.

“We think now we can’t see them tearingdown most all of these big hotels,” he muses.“They’ll probably tear down portions andput up towers, but I think in the last fewyears there’s been a lot of demolition. I can’tsee them doing much at MGM. They’ve putall the towers in there. At the Flamingo Ican’t see them doing a lot there either, andCaeser’s is all new and the Wynn propertiesjust keep adding to them.

“On The Strip there’ll be about three bigmajor operations, and the rest will get eatenup. Already, MGM owns Bellagio and onand on,” he says. “As time goes on, I think[MGM will] buy up more and more. It’llprobably just be the big three pretty soon” —MGM, Wynn and Harrah’s

He contrasts the building of today with thebuilding of early Las Vegas.

“When they started with them you had alittle bitty postage stamp lot and you built ahotel. Now, most all of them have bought alot of property,” he says. “I think demolitionis going to be lighter now that there will beonly two or three big hotels that could go.There’s liable something that could happendowntown, ‘cause I can’t figure out howdowntown’s going to survive — there’snothing flourishing down there compared toThe Strip. In this economy there’s severalthat are kind of shaky. It’s hard to believe.”

Though not much is sacred on The Strip,Goldstrum believes some things are as safeas structures can be in Las Vegas.

“They’ll take over hotels, probably cleanup some small stuff and it’ll all go away,” hepredicts. “It’s been an awful lot of demoli-tion. I just don’t believe the Excalibur andthe pyramid [Luxor] and that Mandalay Bayand all those — I think they’re safe for sev-eral years.”

Relationships ImportantDiversified’s Mercurio believes that

strong ties and reliable businesses will carrythe day for demolition contractors.

“It’s the volume that’s grown, the activitylevel that’s grown,” he points out. “At thesame time it’s gotten more competitive thanit was in 1995. Fortunately for us we’ve gota pretty good longstanding list of clients thatcontinually use us because of our trackrecord. Some jobs it’s not necessarily thelowest bidder but the most qualified one.Some companies put a pretty hefty penaltyfor not bringing in a job on time, daily liqui-dated damages.”

He said improved equipment technologyhelps his company keep a competitive edge.

“We use robotic breakers and use roboticexcavation equipment. We’ve got a state-of-the-art floor milling machine, basically anelectric roto-mill, the same type of millingmachine, for interior uses to tear up architec-tural concrete overlays and for removing tilefloors,” he said. “We employ a lot of cutting-edge equipment for a lot of that type of workthat we can really put technology into playwith on these type of jobs.”

And where safety and fast-moving profes-sionalism is key, he said, it’s important totrust who you’re working with.

“The other strength that adds to our suc-cess is that our core group of what we callsecond-tier management, our field person-nel, our superintendents and general fore-men and foremen core, have been together,probably on average, for 13 years, and wekeep that intact,” Mercurio said. “All ourjobs have delivered the same product day inand day out, and it’s nice to have people thathave been around it for a while and knowwhat the expectations are, what they’re get-

see VEGAS page 52

VEGAS from page 24

Boardwalk Hotel-Casino was brought down in 2006 to make way for the construc-tion of CityCenter Las Vegas, an MGM Mirage property scheduled to open in late2009.



1200 Northmeadow Parkway, Suite 180Roswell, GA 30076USAPhone: 404 614 1747Fax: 800 254 9481

Ground pressure, loaded, w. tire size:- Twin 600/60x30.5 17.0 psi- Twin 800/45x30.5 11.9 psi- Twin 850/45x30.5 11.3 psi

Fuel consumption, average:

3.5 gal/h

Ground pressure loaded, front / rear:- Twin 600/55x26.5 10.4 / 17.7 psi

Fuel consumption, average:

2.8 gal/h

Do you run fuel-effi cient haul trucks with low ground pressure on your projects?

The Hydrema trucks will give you the lowest possible ground pressure

and fuel consumption available in their respective classes!

Booth #S 614


TRAILERS, TRAILERS, TRAILERS!TRAILERS, TRAILERS, TRAILERS!

Call us. PO Box 2468 • 391 Loudon Road • Concord, NH 03302-2468

(800) 358-6007(603) 225-3361 • Fax: (603) 225-4918

www.ewsleeper.comServing Construction Contractors & Municipalities Since 1964

Eager Beaver, Stk# UT0703, 10 Ton, Air Brakes, 16' Deck, 8' Wide,Steel Deck, Good Rubber and Tires, 1985 ....................................$3,900

Hudson HTD18C, Stk# HT0700, 12 Ton, Electric Brakes, 102"x18', Yellow,(LEFT OVER) ..............................................................$8,900 Includes FET

Hudson HTD18D, Stk# HT0701, 10 Ton, ElectricBrakes, 102"x18', Paver Special, Oak Deck, Tool Box,Black, (LEFT OVER) .........................................$8,800

Hudson HTD18D, Stk# HT0702, 9 Ton, ElectricBrakes, 102"x18', Oak Deck, Tool Box, Yellow, (LEFTOVER) ..............................................................$7,800

Interstate, Stk# UT0802, 12 Ton, 1987 ...........$3,000 Hudson HSLG12, Stk# HT0706, 3500 #, 12' Deck,Cargo Rail, 2" Ball, 4' Landscape Ramp, Black, (LEFTOVER)...............................................................$1,995

Rogers Tag 20L, Stk# RT0604, 20 Ton, 19' Flat Deck, Tool Box, Black,(LEFT OVER) ..........................................................$17,500 includes FET

Bri-Mar DT508-5, Stk# BM0601, 5000 lb GVWR,5'x8' Dump, Black, (LEFT OVER)......................$2,950

Custom 45K242ASLP, Stk# UT0803, 3 Axle, GoodRubber 215/75, 2001 ....................................$11,900

Hudson HTD18C, Stk# UT0806, 10 Ton, ElectricBrakes, Good Rubber, Spare Tire ....................$3,500

Bri-Mar D1-100, Stk# BM0720, Dump Insert, Black............................................................................$2,500

Etnyre Low Bed TrailerTrail King LowbedTrail King Tag Trailer

New Trailers by Etnyre and Trail King

PRTN35LTD, Stk# ET0702, 35 Ton, Black...Call for QuotePRTN55ETD-3PS, Stk# ET0704, 55 Ton Paver Special,Black ...........................................................Call for QuoteRTN55ETD-3, Stk# ET0803, 55 Ton, Red, (MarchDelivery)......................................................Call for Quote

TK110 HDG Advantage, Stk# TK0800, 55 Ton, Dark Grey....................................................................Call for QuoteTK110 HDG Advantage, Stk# TK0801, 55 Ton, Black ...........................................................................Call for Quote

TK40LP, 20 Ton, 19' Deck, 235 Rubber, Tool Box .................................................................................Call for QuoteTK40LP Specials, 20 Ton, 21' Deck, 235 Rubber, ToolBox ..............................................................Call for QuoteTK50LP, 25 Ton, 3 Axle, 23' Deck, 235 Rubber, Tool Box,3rd Axle Air Lift Available .......................... Call for Quote


The Gorilla Team isHammered with Inventory!

HELP!!!

888-81-GORILLA(46745)

www.gorillahammers.com

See OurRepresentatives

at Con ExpoBooth #C-4347

or Call Them Directly@ ConExpo

617-592-2070 or617-592-2071


NIECE EQUIPMENT, LP888-643-2372

3039 Hwy 71 EastDel Valle (Austin) TX 78617

NIECE Equipment Manufacturing

602-258-19372101 S. 15th Ave

Phoenix, AZ 85007

NIECE Equipment Rentals

972-342-6600800 N Hwy 77 #160-122

Waxahachie (Dallas) TX 75165

EQUIPMENT, LPwww.NieceEquipment.com

Sa

les

• R

en

tals

• P

art

s

B

UIL

T T

O L

AS

T

BU

ILT

TO

LA

ST

S

ale

s •

Re

nta

ls •

Pa

rtsThe SITE MONSTER

12,000 Gallon WaterTower and 1,500 to5,000 Water TrucksBuilt Tough EnoughTo Wear The NIECE

Brand...Strong Enough To

Meet The Needs OfThe Most

Demanding Projects!

Fuel Lube Truck with View of Emergency Shut Off Valves and Filler Hoses Brush Truck With Rear View


Need one for a day?

Rent the top-of-the-line machine that you need. For a day, or for a week.

The names that you know and rely on—Caterpillar, Genie, Challenger

tractors, Screen Machine. And rent the work tools that will turn that

project into a money-maker.

To view available machines visit rentmachines.com. To find the Rental Alliance location nearest your job site, call 888-637-0603.

RENTMACHINES.COM™

www.miltoncat.com

The Rental Alliance™

The Rental Alliance


601 HAMILTONDR., NOBLE, OKLAHOMA, 73068 | V: 405.872.1890 F: 405.872.1893

WWW . I R O NW O L F . C O M

CONTACT: JAY BAKER REGIONAL SALES MGR. 405.919.6262

W W W. I R O N W O L F. C O M

DRILL, BLAST, RIP,BREAK, HAUL, CRUSH, SLASH, PILE, BURN!

Is it possible to eliminate numerous processes, equipment, manpower, and costs while maintainingor increasing production levels?Absolutely!

Thanks to Iron Wolf’s innovative attach-ments, contractors are working faster andmore efficiently. If you deal in rock, concrete, asphalt, trees, stumps,and roots, IronWolf Crushers andSlashers are an economic choice for amultitude of applications.Bottom line... more jobs can be completed with fewer resources.

DEALERS INQUIRIES WELCOME.ROCKY MOUNTAIN EQUIPMENT

Wyoming, Montana, Idaho, Utah, and East Washington.Gordon Kesler 406-855-4368

BLAINE EQUIPMENT CO., INC.Nevada, part of Arizona and part of California. 702-399-2700

R&D EQUIPMENTNorth and East Texas. Rusty Griffis 405-590-2865

OMT ENTERPRISESOklahoma. Richard Peek 405-665-5456

LONE STAR MACHINERYSouth and West Texas, New Mexico.Roger Palmquist 210-492-5960

D. STOREY, INC.Illinois, Iowa, and Missouri 515-986-1195

I-QUIPIndiana, Ohio, Michigan, Wisconsin,and Minnesota 920-309-2035

=

=

601 HAMILTON DR., NOBLE, OKLAHOMA, 73068 | V: 405.872.1890 F: 405.872.1893

CONTACT: JAY BAKER, REGIONAL SALES MGR. 405.919.6262

GREG OGLE, REGIONAL SALES MGR. 405.245.7429

Visit Us at ConExpo, Silver Lot 674BMarch 11th – 15th



NewMillenniumRentals, Inc.

Your Attachment Rental Specialist

Member: The Brotherhood of Operating EngineersMember: National Assoc. of Demolition Contractors

AUTHORIZED DISTRIBUTOR

VISIT US ONLINE AT:www.newmillenniumrentals.com

AUTHORIZED DISTRIBUTOR

LARGEST SPECIALIZED FLEET IN NORTH AMERICA

SHEAR PACKAGES FOR RENT OR SALE

1-877-667-19981-877-667-1998

RENTING NATIONWIDE

Peter E. Menner, President Rent the right attachment for the job!

ENVIRONMENTAL • RECYCLING • DEMOLITION • RECONSTRUCTION

RENT WHAT YOU NEED. BUY WHAT YOU WANT.RENT WHAT YOU NEED. BUY WHAT YOU WANT.

GENESIS XP ROTATING SHEARSGENESIS DEMOPRO PULVERIZERSGENESIS LOGIX UNIVERSAL PROCESSORSHAMMERS - 3,000 LB - 15,000 LBROTATING GRAPPLES & BUCKETSEXCAVATORS 16,000 - 180,000 LBSTRANSPORTATION AVAILABLE

HIGHER POWERHIGH REACH DEMO UNITS with MULTIPLE TOOLSHD-XTENDED REACH and ULTRA LONG REACH FRONTS

HIGH REACH DEMO UNITS with MULTIPLE TOOLSHD-XTENDED REACH and ULTRA LONG REACH FRONTS

WE’ VE GOT WHAT YOU NEED!


Global Development International Inc.Chicago, Illinois; New York, NY; and Montreal, Canada

www.usachenggong.com (Loaders)www.shredderhotline.com (Shredders)

815-674-5802 USA and Canada514-882-2122 Canada

You can buy this for $50,000plus freight witha Made In USACumminsEngine

You can buy this for $70,000 plusfreight with a Made

In USA CumminsEngine

You can buy this wholewood waste system and

the loader for under$500,000 USD

plus freight

Operational for over one year and no maintenance problems


Shredderhotline.com Company Inc.Chicago, Illinois; New York, NY; and Montreal, Canada

www.usachenggong.com (Loaders)www.shredderhotline.com (Shredders)

815-674-5802 USA and Canada514-882-2122 Canada

We make shredding

systems and are the

exclusiveimport agentfor the Cheng

Gong line fromChina for the

USA andCanada

This Shredder is offered at a base price of only $150,000 and a full system can be easily

provided in the $250,000 to $500,000 range

ThisShredderhandles a

wide varietyof waste

materials andbulky waste.

SHREDDERS DO NOT NEED TOCOST A FORTUNE

ANYMORE!!!

WE WELCOME INQUIRIES ON

SHREDDER NEEDS FOR THOSE WHO HAVESTICKER SHOCK FROM

OTHER SHREDDER COMPANIES




ALEX E. PARIS CONTRACTING COMPANY, INC.Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820Call Andy Miller Established 1928

Our Greatest Assets .. Our Employees

Komatsu WA180-1, 1996, EROPS, Quick Coupler,Exc. Condition . . . . . . . . . . . . . . . . . . . . . . . . .$46,500Komatsu WA250-3PT, 1999, EROPS w/AC, JRB cou-pler, bucket, forks 20.5x25, good condition .$63,500Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . .$100,000Cat 936E, 1989, EROPS, 2.75 cy GP bkt, clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59,000New Holland LS170 Skid Steer, 2004, 300 hrs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,000John Deere 624G, 1996, EROPS, quick coupler, GPbkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$66,000

IR DD22, 1993, 39" double steel, vibratory, Deutz dsl,water spray, v. good . . . . . . . . . . . . . . . . . . . .$18,500IR SD100D Pro-Pac Vibratory Compactor, 1999,Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500IR SD105DX, 2002, 84" drum drive, OROPS, veryclean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500IR SD105DX, 2002, 84" drum, OROPS, clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69,500IR SD150F, 84" Padfoot, 1998, OROPS . . . .$49,500IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit,ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500IR SD70D, 2000, Pro-Pac, 66" smooth drum, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,000Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, verynice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000Cat 825B, 1975, cab, S-blade, 50% front, 20% reartires, good runner, can go to work . . . . . . . . .$52,500Cat 825C, 1988, EROPS, S-blade w/tilt, rear 80%,front 60%, good condition . . . . . . . . . . . . . . . . .CALLGalion S4-6B, Deutz dsl, hydrostatic, 42” drums,transport wheels, water spray . . . . . . . . . . . . .$4,800Hypac C747B, 2001, articulated, vibratory, 47” drums,water spray, Deutz 2 cyl, 5500#, good condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500Hypac C850B, 1999, ROPS w/cab, 84” smooth drum,drive, Cummins, 18-26 tires . . . . . . . . . . . . . .$47,500Multiquip MR8G Walk Behind VibratoryCompactor, 1997, Briggs & Stratton 8 HP gas engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,500Rammax Walk Behind Rollers, over 25 in stock,lever & remote . . . . . . . . . . . . . . . .$4,000 to $10,000(8) Sheepsfoot, 48" and 60", double drum & singledrum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500(2) Champion Superpac A421 . . . . . . . . . .$11,500

Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37,500Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000

Komatsu CD60R-1 Crawler Dump Truck, 1997, 360°rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66,000Terex TA40, 2000, 6WD, 6x6, 40 ton Detroit 60 Series,Clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$142,500Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD,29.5R25, A/C, 29 cy cap. sideboards, tailgate (currentlyoff work), work ready . . . . . . . . . . . . . . . . . . . .$127,500Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25,working everyday . . . . . . . . . . . . . . . . . . . . . . .$145,000Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25,A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt .$115,000Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C,P/S trans, tailgate, work ready . . . . . . . . . . . . .$115,000Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx7,000 hrs, good condition . . . . . . . . . . . . . . . . .$147,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,P/S trans, working everyday on jobsites . . . . . .$87,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C,P/S trans, 26 cy, working everyday on jobsites $89,000Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500

Cat D4H Series II, 1990, OROPS, 6 way blades, 18"pads, draw bar, 100% Cat U/C . . . . . . . . . . .$57,000Cat D6H, 1988, OROPS, S-blade w/tilt . . . .$76,000Cat D6H LGP Series II, 1993, EROPS, diff steer,drawbar, 30" pads, fresh undercarriage . . . .$89,000Cat D6H, 1987, Semi U blade w/tilt, ROPS, fair U/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,000(2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 EaKomatsu D37P-5, 1997, 24" Pads, OROPS, P/S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36,500

Case 480 Broom Tractor, frt mounted 6' sweepsterbroom, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . .$13,000Case/IH 485 Utility Tractor,1986, Case 3 cyl dsl engine,55 gal water tank . . . . . . . . . . . . . . . . . . . . . . . . .$10,500Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72"hydraulic broom . . . . . . . . . . . . . . . . . . . . . . . . . .$11,500Taylor-Way 12' Transport Disc, 24" discs, (4) tires, hydlift, exc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15,500Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hydangle tongue, scrapers, 2” axles . . . . . . . . . . . . .$9,500

IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . . . .CALL

Vermeer 5800 Trencher, 1997, 4 cyl dsl eng .$17,500(12) IR L6-4MH Light Plants, 1992-1995, all excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALLIAmerican Augers 16" Boring Machine, 10 HP gas,35,000# thrust, 30' track . . . . . . . . . . . . . . . . . . . .$7,500

Cat 416C IT, 2000, 4x4, OROPS, Quick Coupler, GPBkt, Extendahoe . . . . . . . . . . . . . . . . . . . . . . . . .$36,000Case 580L Rubber Tire Loader Backhoe, 1997,OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . . .$24,500Volvo BL70, 2003, 4x4, Extend-A-Hoe, EROPS, 24"Bkt, Like New . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59,500

Cat 621F, 1996, Scraper, OROPS, 33.25x2, very goodcondition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALLCat 621E, 1989, Scraper, OROPS, 33.25x29, verynice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL

JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick cou-pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$39,000Hitachi UH181, 1985, Equipped w/hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$72,000Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber, operational . . . . . . . . . . . . . .$10,500/OFFERCat 215BLC, 1985, 7'3" stick, 28" TBG pads, 10 rollerU/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $31,500Cat 313B-CR, 2001, zero tailswing, A/C & AM/FM,JRB quick coupler . . . . . . . . . . . . . . . . . . . . .$93,000Kobelco SK200LC Extra Long Reach, 1993, 32"TBG pads, 42' reach, nice . . . . . . . . . . . . . . .$68,500Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, longstick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44"Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt,27.6" TBG pads, work ready . . . . . . . . . . . . .$57,000(5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . .CALLKomatsu PC750 LC-6, 1999, 454 hp, 27” boom,11’10” stick, 44’ DGB, aux plumbing, bucket choice,24k ctwt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$255,000Komatsu PC400 LC-6LK, 1999, 10’6” stick, JRB cou-pler, 31.5” TBG, ctwt removal, choice of bkt .$77,500Komatsu PC400 LC-6LK, 11’1” stick, 35.5”TBG, ctwtremoval, choice of bkts, working everyday . .$97,500Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRBcoupler, plumbed, 8’6” width, nice, work ready CALLVolvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumb-ing very good condition . . . . . . . . . . . . . . . .$205,000

(2) 48' Box Vans w/Liftgates, Good Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL

Power Screen, Mark II, 1987, Port. Screening Plant,Double Deck, 24'x40' . . . . . . . . . . . . . . . . . . .$36,000Viper 301 Portable Screening Plant, 1997, dsl, 5'x7'.side & rear conveyors, T/A carrier . . . . . . . . . . .CALL

John Henry Drill Mtd on Cat 320N, 1994, 24' mast,Duraquip dust collection . . . . . . . . . . . . . . . .$150,000John Henry Drill Mtd on Cat 320L, 1994, 24' drill,carousel, dust collector . . . . . . . . . . . . . . . .$162,500

Grove RT58C, 1981, down cab, 18 ton r.t., 70' boomanti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500Drott 3330B Carry Deck, 7.5 ton capacity, dsl, 4 sec-tion boom 8' jib . . . . . . . . . . . . . . . . . . . . . . . .$14,500Shuttlelift Model 3330 ELB Hyd. Carry Deck Crane,duel fuel, elec. winch w/remote control, exc. Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32,500

(2) Balderson Broom Attachment for Cat ITMachines, 8' wide, good condition . . . . . .$4,000 ea.

BUCKETSPC1000, 84" Digging Bucket . . . . . . . . . . . .$9,500

Over 100 Excavator, Loader, Specialized &Grapple Buckets in Stock

-Call For Your NeedsFORKS

(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style,excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000(5) Cat 936/926/950 pallet forks, for a Balderson quickcoupler, exc. cond. . . . . . . . . . . . . . . . . . . .$3,500 Ea

Others Available CallPrices Are Negotiable - At Your

InspectionAll Equipment is Owned & Operated By

ALEX E. PARIS CONTRACTING CO., INC.

ATTACHMENTS

MISCELLANEOUS

CRANES

DRILLS

CRUSHING & CONVEYING

TRUCKS & TRAILERS

HYDRAULIC EXCAVATORS

MOTOR SCRAPERS

BACKHOES

SPECIALS

AIR COMPRESSORS

LANDSCAPING

CRAWLER TRACTORS

OFF ROAD HAULERS

CRAWLER LOADERS

COMPACTORS

WHEEL LOADERS


845/278-7766Fax: 845/278-4431 • E-mail: [email protected] • Visit Our Web Site at www.wtractor.com

60 International Blvd • Brewster, NY 10509

LATE MODEL EQUIPMENTTTRRAACCTTOORR LLOOAADDEERR

22000044 TTCC5555DDAA TTrraaccttoorr wwiitthh LLooaaddeerr,, 4WD, 700 Hrs, Like New ..........................................................................................$$2211,,99995522000055 NNeeww HHoollllaanndd LLTT119900..BB,, Hi Flow, Foot Control, 317 Hrs ................................................................................................SSOOLLDD22000033 NNeeww HHoollllaanndd TTCC4400DD,, Super Steer, Foldable ROPS, Wheel Weights, 17LA Loader, 73 Hrs ..................................................SSOOLLDD11997722 FFoorrdd 33440000,, 760 Hrs, Loader ....................................................................................................................................SSOOLLDD

TTRRAACCTTOORR LLOOAADDEERR BBAACCKKHHOOEESS22000044 NNeeww HHoollllaanndd LLBB7755..BB,, Extendahoe, A/C, 941 Hrs ..................................................................................................$$3399,,99995522000044 NNeeww HHoollllaanndd LLBB111155,, 450 Hrs, 4-in-1 Bucket, Extendahoe ......................................................................................$$5555,,99995522000044 NNeeww HHoollllaanndd LLBB7755BB,, 4WD, Cab, Very Good Condition ............................................................................................$$4488,,99995522000044 NNeeww HHoollllaanndd LLBB7755BB,, Pilot Controls, 300 Hrs ........................................................................................................$$4477,,99995522000044 NNeeww HHoollllaanndd LLBB7755BB,, Extendahoe, A/C, 941 Hrs ..................................................................................................$$3399,,99995522000044 NNeeww HHoollllaanndd LLBB7755BB,, 4-in-1 Bkt, Extendahoe, 4WD, New Backhoe Bkt ....................................................................$$4488,,999955NNeeww HHoollllaanndd LLBB7755,, 4WD, Cab, Heat, A/C, Extendahoe, 1223 Hrs ..................................................................................$$3399,,99995511998877 CCaassee 558800,, EExxtteennddaahhooee,, Cab w/Heat, 4WD, 2200 Hrs ..........................................................................................$$1122,,99000022000000 CCaatt 441166CC,, 4 in 1 Bucket, Extendahoe, 4WD, Cab, 1495 Hrs ..................................................................................$$4433,,99995511999966 FFoorrdd 555555DD,, Cab, 4WD, 6846 Hrs ............................................................................................................................SSOOLLDD11999922 FFoorrdd 555555DD,, 4WD, 6786 Hrs ....................................................................................................................................SSOOLLDD22000077 KKuubboottaa LL3399,, Quick Coupler, 75 Hrs, Excellent Condition ..........................................................................................$$3311,,55000011999999 FFoorrdd 667755EE,, 4WD, Cab, Heat, A/C ......................................................................................................................$$2233,,99995511999988 JJCCBB 221144SS,, 4 in 1 Bucket, Extendahoe with Flip Forks, 3805 Hrs ............................................................................$$2299,,999955

EEXXCCAAVVAATTOORRSS11999966 CCaatt 330077,, Cab, 4981 Hrs, Blade ................................................................................................................................SSOOLLDD22000044 KKoobbeellccoo EEDD115500,, 1718 Hrs, Very Good Condition ..................................................................................................$$6699,,99995522000044 KKoobbeellccoo EEDD119900,, 1500 Hrs, Very Good Condition ................................................................................................$$111155,,00000022000066 KKoobbeellccoo SSKK113355,, With UB310 Hammer, Excellent Condition, Dealer Maintained..........................................................$$6644,,99995522000055 KKoobbeellccoo SSKK116600,, 36" Bucket, Dealer Maintained, Excellent Condition ........................................................................$$9999,,99995522000066 KKoobbeellccoo SSKK2255,, Rubber Tracks, Dealer Maintained, Excellent Condition ......................................................................$$2200,,99995522000066 KKoobbeellccoo SSKK335500,, Standard Boom, Dealer Maintained ............................................................................................$$119955,,99995511999955 KKoommaattssuu PPCC4400,, 4209 Hrs, Good Condition ..........................................................................................................$$1100,,99995522000066 NNeeww HHoollllaanndd EEHH331100,, 36" Bucket, Dealer Maintained ............................................................................................$$8844,,99995522000044 NNeeww HHoollllaanndd EEHH116600,, Dealer Maintained, Very Good Condition ................................................................................$$6677,,99995522000033 TTaakkeeuucchhii TTBB117755,, 2675 Hrs, 24" & 36" Buckets, Thumb, Coupler, Rubber Tracks ......................................................$$5533,,44880022000000 VVoollvvoo EECC114400LLCC,, Thumb, 3440 Hrs ............................................................................................................................SSOOLLDD22000011 NNeeww HHoollllaanndd EECC3355 MMiinnii EExxccaavvaattoorr,, 1015 Hrs ......................................................................................................$$1199,,999955

MMOOWWEERR22000055 JJaaccoobbsseenn HHRR66001100 CCoommmmeerrcciiaall RRiiddiinngg MMoowweerr,, 60" Front Mower, Two 40" Side Mowers, Demo Unit, 156 Hrs ..............$$3366,,000000

WWHHEEEELL LLOOAADDEERRNNeeww HHoollllaanndd LLWW8800BB,, Hydraulic Coupler, 2 Bkts, New Tires, 1457 Hrs ..............................................................................$$4499,,999955

TTEELLEEHHAANNDDLLEERR22000066 NNeeww HHoollllaanndd LLMM886600,, Cab, Very Good Condition, Dealer Maintained ........................................................................$$4466,,999955

SSKKIIDD SSTTEEEERRSS22000000 NNeeww HHoollllaanndd LLSS118800,, Open Cab, 2614 Hrs, New Tires............................................................................................$$1155,,99995522000044 NNeeww HHoollllaanndd LLSS119900,, 500 Hrs, 2 Speed, Good Condition..............................................................................................SSOOLLDD

TTRRAAIILLEERRSS11999988 DDyynnaawweelldd 2200TT TTrraaiilleerr,, Good Condition ....................................................................................................................$$66,,99995522000033 IInntteerrssttaattee 2200 DDTTAA,, Air Brakes ................................................................................................................................$$77,,55000011998888 IInntteerrssttaattee 3355 TToonn TTrraaiilleerr,, Air Brakes, Detachable Goose Neck ..................................................................................$$1155,,000000

CCRRAAWWLLEERR LLOOAADDEERR22000066 NNeeww HHoollllaanndd CC118855 CCrraawwlleerr LLooaaddeerr,, 84" Bucket, Dealer Maintained ........................................................................$$4444,,999955

DDOOZZEERRSS11998877 CCaatt DD44 DDoozzeerr,, 1000 Hrs, Good Condition ............................................................................................................$$2299,,99995522000055 NNeeww HHoollllaanndd DDCC8855,, 9’ Blade, Cab, A/C, 358 Hrs ................................................................................................$$6699,,99995522000011 JJoohhnn DDeeeerree 775500CC IIII,, 1900 Hrs, Very Good Condition ..................................................................................................SSOOLLDD11998899 CCaassee 445500CC,, 3281 Hrs, Good Condition ................................................................................................................$$1144,,999955

CCHHIIPPPPEERRSS22000000 BBaannddiitt 225544,, 14” Capacity, Winch, Hydraulic Lift, Ext. Tongue, 2700 Hrs ..................................................................$$2277,,99995522000044 VVeerrmmeeeerr BBCC11440000,, Winch, 1900 Hrs ....................................................................................................................$$1177,,999955

MMIISSCCEELLLLAANNEEOOUUSS22000033 BBoobbccaatt RRTTLL 55660000 TToooollccaatt 44xx44 UUttiilliittyy VVeehhiiccllee,, Cab, A/C, 331 Hrs ............................................................................$$3311,,55000022000066 NNoorr AAmm 6655EE RRooaadd GGrraaddeerr,, 7 Hrs, Brand New ........................................................................................................$$9966,,99995522000022 HHaarrlleeyy MM--66 RRaakkee ................................................................................................................................................$$55,,99995511999977 HHoowwaarrdd PPrriiccee 11228800 BBaattwwiinngg MMoowweerr,, Hydrostatic ....................................................................................................$$66,,00000022000033 JJoohhnn DDeeeerree HHPPXX GGaattoorr UUttiilliittyy VVeehhiiccllee,, Spare tire, 500 Hrs ........................................................................................$$88,,00000022000033 JJoohhnn DDeeeerree HHPPXX GGaattoorr UUttiilliittyy VVeehhiiccllee,, Plow, 450 Hrs ..................................................................................................SSOOLLDD22000033 LLooeeggeerriinngg LLSSBB7733--33CC,, 73" Snow Blower, Used Once ....................................................................................................SSOOLLDD22000077 VViibbrroommaaxx SSCCMM4400 SSccrreeeenniinngg PPllaanntt,, 197 Hrs................................................................................................................SSOOLLDD

22000044 NNeeww HHoollllaanndd LLBB7755..BB,, Extendahoe, A/C, Pilots, 4 in 1,723 Hrs ............................................................ $$4455,,000000

22000022 NNeeww HHoollllaanndd LLBB9900,, Extendahoe, Heat, Cab, 620 Hrs............................................................................$$4422,,999955

22000044 NNeeww HHoollllaanndd LLBB7755BB,, Extendahoe, A/C, 941 Hrs..................................................................................$$3399,,999955

SOLD


The Premier Midwest Equipment Dealer

Rockford Lake Geneva, WI

I-39

Rt.

47

DavenportIA

Morris

1/2 MileRt. 6

W E

N

S

Chicago

Gary IN

Dwight

I-55

“The Premier Midwest Equipment Dealer”

2005 Cat 963C, EROPS, ac, 22"pads, GP bucket, drawbar, 2 lever

controls$174,500

1994 Cat 973 LGP, OROPS, 26"pads, GP bucket, 6,978 hours,

$54,500

1990 Cat 973 LGP, EROPS, ac, 26"pads, GP bucket, hydraulic rear

ripper, 2 lever controls$64,500

1990 Cat 973 LGP, EROPS, ac, 26"pads, GP bucket, 2 lever controls

$54,500

1997 Cat 963B, EROPS, 22" pads,GP bucket, 2 lever controls, 6,842

hours$69,500

2003 Cat 963C, EROPS, ac, 22"pads, GP bucket, 2 lever controls,

5,116 hours$109,500

2003 Cat 963C LGP, EROPS, ac, 22"pads, GP bucket, joystick controls,

3rd valve, 4,117 hours$114,500

1998 Cat 963B, OROPS, 22" pads,GP bucket, lever controls, 7,280

hours$59,500

2003 Cat 953C, EROPS, ac, 20"pads, GP bucket, drawbar, joystick

controls, 3,488 hours$89,500


1,249 hours$124,500


2,374 hours$114,500

2004 Cat 953C, EROPS, ac, 20"pads, GP bucket, 2 lever

controls,2,809 hours$104,500

2005 Liebherr LR622B, EROPS, ac,20" pads, GP bucket, joystick

controls, 325 hours$94,500

2001 Cat 953C, EROPS, ac, 20"pads, GP bucket, joystick controls

$79,500

1999 Cat 953C, OROPS, 20" pads,GP bucket, 2 lever controls, 3,990

hours$79,500

(3) 2004 Cat 939C Hystat, OROPS,16" pads, GP bucket, joystick

controls, 962 hours$54,500 each

815-941-1900Fax: 815-941-1486

Email: [email protected]

View Entire List of Equipment at:

www.iltruck.com I-80 Exit 112Joliet

CRAWLER LOADER LIQUIDATION!! 24 UNITS MUST SELL!!


IROCKTOUGH CRUSH ING SOLUT IONS

MANUFACTURER OFPORTABLE CRUSHING &SCREENING EQUIPMENT

Contact Sean [email protected] Canal Road, Valley View, OH 44125

TOUGH CRUSHINGSOLUTIONS

Dealer Inquiries Welcome

Look for us at CONEXPO 2008,Booth S-720

Used Equipment AvailableGo to

I R O C K C R U S H E R S . c o m

For your nearestSCHUFT FAB IIdealer:

Nicolas D. Schuft22712 30th StreetStewart, MN 55385

(320) 562-6334

Bob Jergens, ND(800) 733-1099

Bob Doran, DDSI, WI(608) 516-6256

Mike Kowalczyk, MI(616) 450-6168

FROM THE INVENTORS OF THE “SIDEWINDER” COMES THE PATENT PENDINGEZSHOOTER 1500! EZSHOOTER 8000!•• 11550000 llbb ccaappaacciittyy wwiitthh sseellff--

ccoonnttaaiinneedd hhyyddrraauulliicc ppuummpp aannddaaccttuuaattoorr ttoo ppuummpp yyoouurrsseellff aa ffeewwddeeggrreeeess aatt aa ttiimmee..

•• NNoo nneeeedd ffoorr AAuuxxiilliiaarryy HHyyddrraauulliiccss•• IInntteeggrraatteedd wwoorrkk ppllaattffoorrmm wwiitthh

ccuussttoomm ssiizzeess aavvaaiillaabbllee..•• RReemmoovvaabbllee ddoooorrss aanndd ssiiddeess..•• SShhoorrtteesstt aanndd oonnllyy 110000 ddeeggrreeee

HHyyddrraauulliicc PPuummpp aaccttiioonn sswwiinngg oonntthhee mmaarrkkeett..

•• AAvvaaiillaabbllee ffoorr AALLLL VVaarriiaabbllee RReeaacchhFFoorrkk LLiiffttss..

•• 22 YYeeaarr UUnnlliimmiitteedd WWaarrrraannttyy•• PPrroouuddllyy mmaaddee iinn tthhee UUSSAA..

•• IInndduussttrryy lleeaaddiinngg 88000000llbb lliifftt ccaappaacciittyy..•• NNOO ““DDRRIIFFTT”” aassssoocciiaatteedd wwiitthh oorrbbiitt mmoottoorr

ddeessiiggnnss ggiivviinngg yyoouu uunnpprreecceeddeenntteedd hhoollddiinngg aabbiilliittyy aatt aallll aanngglleess..

•• NNoo ““GGEEAARR LLAASSHH”” oorr ““GGEEAARR WWEEAARR”” ccaauussiinngg eexxcceessssiivvee ppllaayy..

•• NNOO EExxppoosseedd wweeaarr ssuurrffaacceess.. FFuullllyy sseeaalleedd,,FFuullllyy GGrreeaassaabbllee TThhrruusstt BBeeaarriinnggss && PPiivvoottss..

•• NNOO ““SSAAFFEETTYY PPIINNSS”” ttoo mmaaiinnttaaiinn cceenntteerr..•• SShhoorrtteesstt 118800 ddeeggrreeee ffuullllyy aauuttoommaattiicc

sswwiinngg oonn tthhee mmaarrkkeett..•• AAvvaaiillaabbllee ffoorr AALLLL VVaarriiaabbllee RReeaacchh FFoorrkklliiffttss..•• 22 YYeeaarr UUnnlliimmiitteedd WWaarrrraannttyy•• PPrroouuddllyy mmaaddee iinn tthhee UUSSAA..

AACCCCEEPPTT NNOO IIMMIITTAATTIIOONNSS!!

RREELLYY OONN YYOOUURR IINNDDUUSSTTRRYY LLEEAADDIINNGG

TTEELLEEHHAANNDDLLEERRAATTTTAACCHHMMEENNTT

SSOOUURRCCEE!!

•• EEnnggiinnee OOnn•• EEnnggiinnee OOffff•• BBoooomm IInn•• BBoooomm OOuutt•• BBoooomm RRaaiissee•• TTiilltt UUpp•• TTiilltt DDoowwnn•• RRoottaattee LLeefftt•• RRoottaattee RRiigghhtt•• BBoooomm LLoowweerr

•• EEnnggiinnee OOnn•• EEnnggiinnee OOffff•• BBoooomm IInn•• BBoooomm OOuutt•• BBoooomm RRaaiissee•• TTiilltt UUpp•• TTiilltt DDoowwnn•• RRoottaattee LLeefftt•• RRoottaattee RRiigghhtt•• BBoooomm LLoowweerr

MMOOBBIILLEEOONN LLOOCCAATTIIOONNIINNSSTTAALLLLEEDD!!

MMOOBBIILLEEOONN LLOOCCAATTIIOONNIINNSSTTAALLLLEEDD!!

YOUR TELEHANDLER ATTACHMENT SOURCE!

REMOTE CONTROL EQUIPMENT

NEW!Remote

Operation DELIVERYAVAILABLE!

WirelessRemote

Patent Pending


COMPACT UTILITY UNDERCARRIAGE

HEAVYQUIP carries a complete line of continuous steel cord rubber tracks for most continuous track loaders,mini and mid-size excavators, paving machines, carriers and dump loaders, scissor lifts, directional boring units and many other types of equipment. In addition to rubber tracks, HEAVYQUIP also offers sprockets, bottom rollers, top rollers and front and rear idler assemblies for many of the machines listed below. HEAVYQUIP’s years of experience working with these machines has provided invaluable knowledge when fi tting the right track for the machine and application.

Now available for most Bobcat® equipment & also available for Takeuchi®, Gehl® and Mustang® track loaders.

ASPHALT PAVER PARTS

HEAVYQUIP carries an expanding line of Asphalt Paver Parts for Roadtec®; Leeboy®; Cedarapids®; Blaw-Knox®; Barber-Greene®; Caterpillar®; Champion-Allat®; including:

• Hardox® Screed Plates and Floor Plates HEAVYQUIP’s screed plates are precision formed from special 400 and 500 Brinell alloy steel. HEAVYQUIP screeds are famous for long wearlife and quality fi nish. We also offer a range of chromium carbide screed plates for extra long wear-life.

• Conveyor Chains/Bar Assemblies

• Sprockets

• Track Components

• Rubber and Poly Pads

• Rubber Tracks

• Augers

• Sealmaster® High-Temperature Bearings for Blaw-Knox®, Cedarapids® (Terex®), Barber-Greene® (Caterpillar®), Leeboy®, and Roadtec®

ARKANSASLittle Rock11023 Interstate 30 WestLittle Rock, Arkansas 72209

FLORIDAJacksonville3117 Spring Glen Road, Suite 407Jacksonville, Florida 32207

Tampa9721 U.S. Hwy. 98Dade City, Florida 33525

GEORGIAAtlanta5854 Goshen Springs Rd.Norcross, Georgia 30071

KANSASKansas City1707 East 123rd TerraceOlathe, Kansas 66061

MISSISSIPPIJacksonCorporate Offi ce/Sales248 North Pearson Rd.Pearl, Mississippi 39208

Mississippi Parts Sales246-A North Pearson Rd.Pearl, Mississippi 39208

Gulfport17261 Hwy. 53Gulfport, Mississippi 39503

NEVADAReno445 Coney Island Dr., Suite ASparks, Nevada 89431

OKLAHOMAOklahoma City4253 Will Rogers Pkwy.Oklahoma City, Oklahoma 73108

SOUTH CAROLINAColumbia2542 Charleston HighwayWest Columbia, South Carolina 29169

TENNESSEEKnoxville5700 Rutledge Blvd., Hwy. 11 WKnoxville, Tennessee 37914

Memphis1459 Corporate AvenueMemphis, Tennessee 38132Phone: 1-877-871-8787

Nashville149 Industrial DriveLaVergne, Tennessee 37086

TEXASDallas4801 West Rochelle RoadIrving, Texas 75062

Houston14910 Gulf FreewayHouston, Texas 77034

CANADAToronto1295 Crestlawn DriveMississauga, Ontario L4W1A9


n

GROUND ENGAGING TOOLS

HEAVYQUIP carries a complete line of Ground EngagingTools, including teeth, adapters, cutting edges, and graderblades. Our extensive inventory covers Caterpillar®, Esco®, Hensley®, Komatsu®, H&L®, Hendrix®,John Deere®,Adco®, Bobcat®, Ford®, Galion®, Fiat®, Champion® and Hyundai® styles of parts. With 17 locations and a vast dealer network, let HEAVYQUIP be your next choice when you are in need of ground engaging tools.• Teeth• Adapters• Bolt on Cutting Edges• Ripper Points• Compactor Cleats• Half Arrow Segments• Plow Bolts and Nuts• Tungsten Carbide Overlay• Weld on Base Edges• Buckets• ThumbsThe chemical content, heat treatment, hardness, and wear characteristics have been selected for each product to provide the performance the market demands.

UNDERCARRIAGE PARTS

HEAVYQUIP carries a complete line of undercarriageparts. We carry aftermarket parts to fi t yourCaterpillar®; Komatsu®; John Deere®; Linkbelt®; Kobelco®; Case®; Hitachi®; Hyundai®; Samsung®; Volvo®; Daewoo®; and many more.• Track Chains• Bottom Rollers• Top Rollers• Idlers• Sprockets• Track Shoes• Hardware• Pins and Bushings• Track Adjuster Assemblies• Recoil Springs• Track Guides• Frame Covers• ... and much more

All manufacturers, names, symbols & descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers.


888-866-3406Phone: 651-255-0670 Fax: [email protected]

SHORT BLOCKSFOR: 3126 • C-10 • C-12 • 3406EBUILTWITHGENUINE PARTS!INCLUDES: BLOCK • CRANK • CYL PACKS

ROD & MAIN BEARINGS

RECONDITIONED CYLINDER BLOCKS

SPECIALIZING IN CAT ENGINES & PARTS 888•866•3406

GENUINECRANKSHAFTS

3406A,B,C 3406E

C-15

3176C-12

3306

8862 W. 35 W Service Dr., Minneapolis, MN 55449

FOR: C-16 / C-15 / C-12 / C-10 3406E / 3406C / 3406B 3176 / 3126 / 3306

C-15 & 3406ECRANKSHAFTS

BRAND NEWGENUINE CAT

BLOCKSC-15 & 3406E

ENGINES & PARTS

NEWENGINESC-13 • C-7’S

BRAND NEWGENUINE !!!

SPECIAL PURCHASE

• DAMPERS• FLYWHEELS• CAT ENGINE BRAKES• OIL PANS• FLYWHEEL HOUSINGS• INJECTORS• TURBOS• AIR COMPRESSORS

FLYWHEELHOUSINGS

FLYWHEELS

INJECTORS

DAMPERS

ENGINE BRAKEACCUATORS

PANSTURBOS

AIR COMPRESSORS

SHORT BLOCKS NEGENUINE C

BLOCKS

NEC-

OVER 25,000 CAT ENGINEPARTS IN STOCK!


N14

T-CHECKSAMEDAYSHIPPING

FLYWHEEL HOUSINGS

FRONT COVERS

MIDWESTDIESELENGINES&PARTS [email protected]

WESPECIALIZEIN

EXHAUSTMANIFOLDS

VIBRATION DAMPERS

31263176 3406E

3406B,C 3176 C-12

OIL PANS

3406 C10 / C12

33063406E

3126 3126

BIG CAM

REDI-MIXAPPLICATION

NEW CAT

C12 PTO FLYWHEEL HOUSINGS

SPECIAL!

BRAND NEWGENUINE CAT

FLYWHEELSRECONDITIONEDGENUINECAT

3176, C-10, C-12

3406E

3306ACTUATORS

GOOD USED CAT ECM’s

GOOD USED CAT ELEC. INJECTORS

3176, 3406E, C10, C12, C15, 3126

31763406E

C10C12

3126

SAME DAY SHIPPING

WE’VE GOT3406E OIL PANS!!

3126

SPECIAL PURCHASECUMMINS OIL PANS

RECONDITIONEDCAMSHAFTS

FOR CAT3406E • C-12 • 3406 B/C

3176 • C-10 • 3126 • 3306

T-CHECK

COMCHEKCOMCHEK

3126 / 3306 / 3176 / C-12 3406A,B,C / 3406E / C-15

3406E

C12 C13

3406E3406BC-12312633063176 3126 3306

M11ISX

NEW & USED

C15OIL PANS

JAKE BRAKESC15 & 3406E

CATERPILLARENGINE BRAKES

C13 & C15

CAMS PUMPSHOUSINGS TIMING ADVANCE

O31

34

USED FUEL PUMPS & PARTS FOR 3406 A/B/C & 3306

CAT CYLINDER HEADSNEW SURPLUS / RECONDITIONED / USED

3126 • 3406-B/C 3176 • C10C12 • 3306


22000011 DDAAEEWWOOOO GG3355SS,, INDFORKLIFT-8000-9000 LB, S/NCB00387, UNIT #403098 ................................................$$2200,,000000

22000033 DDEEEERREE 331100GG--WWEETT--DD//LL,,BACKHOE 4WD 15', S/NT0310GX919108, UNIT #458757......................................$$3355,,770000

22000011 GGEENNIIEE GGSS22003322,, SCISSORLIFT-20' DC-30-34", S/NGS3246118, UNIT #399253, HRS298 ................................$$44,,220000

22000000 JJLLGG NN4400EE--NNAARR,, ART BOOMLIFT-40-44'-2W DC, S/N0300051189, UNIT #318198............................................$$1155,,000000

22000000 LLUULLLL 664444BB--4422,, RCH FORK-LIFT-6000 LB 40-45', S/N00Z24N221302, UNIT#80423509 ....................$$3377,,000000

22000011 DDEEEERREE 220000LLCC,, EXCAVA-TOR-42-48.9K LB-TRACK, S/NFF0200X501951, UNIT #391673......................................$$6688,,550000

2001 GENIE GS1530, SCISSOR LIFT-15-19' DC, S/NGS3048527, UNIT #402994. . . . . . . . . . . . . . . . . . . . . . $3,8002002 JLG 203200, SCISSOR LIFT-20' DC, S/N 200101778, UNIT#404814 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5,2001997 SKYJACK SJII-6832, SCISSOR LIFT-30-34' DC-46-69",S/N 81306, UNIT #80685593. . . . . . . . . . . . . . . . . . . . . $6,1002003 GENIE GS2632, SCISSOR LIFT-26' DC-30-32”, S/N GS320350321, UNIT #460069 . . . . . . . . . . . . . . . . $7,7002002 JLG 33RTS-DF, SCISSOR LIFT-30-34’, 4WD, S/N0200093173, UNIT #407601 . . . . . . . . . . . . . . . . . . . . $16,300

2000 JLG 600AJ, ART BOOM LIFT-DF-2WD S/N 0300052542,UNIT #330625 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $31,0002000 JLG N35E-NAR, ART BOOM LIFT-35-39'-2WD DC, S/N 0300053536, UNIT #339239. . . . . . . . . . . . . . . . . $14,5002000 JLG N40E, ART BOOM LIFT-40' 2WD DC, S/N0300052942, UNIT #338504 . . . . . . . . . . . . . . . . . . . . $18,3002000 JLG 40H-DF-2WD, STR BOOM LIFT-40'-2WD, S/N 300050627, UNIT #80722095. . . . . . . . . . . . . . . . $19,500 2000 JLG 40H+6, STR BOOM LIFT 2WD-DSL, S/N 300049409,UNIT #341558 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $23,000

2003 ATLASCOPCO QAS28, GENERATOR-20-29 KW, S/N 1615927283, UNIT #477822. . . . . . . . . . . . . . . . . $10,5002002 ATLASCOPCO QAS78, GENERATOR-75 KW, S/N USA004734, UNIT #435832 . . . . . . . . . . . . . . . . . $14,500

2003 AMIDA AL4060D, LIGHT TOWER-4-6KW-4 LAMP-TOW-ABLE, S/N DUF02083, UNIT #476296 . . . . . . . . . . . . . . . $4,5002003 AMIDA AL4060D, LIGHT TOWER-4-6KW-4 LAMP-TOWABLE, S/N DUF02081, UNIT #476294. . . . . . . . . . . $4,5002003 AMIDA AL4060D, LIGHT TOWER-4-6KW-4 LAMP-TOWABLE, S/N DUF02084, UNIT #476297. . . . . . . . . . . $4,500

2002 DAEWOO G30E, IND FORKLIFT-6-7000 LB, S/N CW02454,UNIT #412016 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $13,500 2001 DAEWOO G35E, IND FORKLIFT-8000-9000 LB, S/N CB00355, UNIT #403099 . . . . . . . . . . . . . . . . . . . $19,0002000 GRADALL 534D6, RCH FORKLIFT-6000 LB 35-39', S/N 688673, UNIT #337656. . . . . . . . . . . . . . . . . . . . . $29,5002000 LULL 644D-34, RCH FORKLIFT-6000 LB 20-34' S/N00AL25W241122, UNIT#80423067 . . . . . . . . . . . . . . . $32,0002002 GRADALL 524-3S, RCH FORKLIFT-6000 LB 20-34', S/N 277588, UNIT #403512. . . . . . . . . . . . . . . . . . . . . $34,0002000 LULL 844C-42, RCH FORKLIFT-8000 LB 35-45', S/N 00W21P223197, UNIT #80424214 . . . . . . . . . . . . $38,5002002 GRADALL 534D9-45, RCH FORKLIFT-9000 LB 35-45',S/N 744223, UNIT #416535. . . . . . . . . . . . . . . . . . . . . $47,0002002 SKYTRAK 10054, RCH FORKLIFT-10,000 LB 40-55', S/N 15970, UNIT #406512. . . . . . . . . . . . . . . . . . . . . . $60,000

FFFF OOOO RRRR KKKK LLLL IIII FFFF TTTT SSSS

LLLL IIII GGGG HHHH TTTT IIII NNNN GGGG

GGGG EEEE NNNN EEEE RRRR AAAATTTT OOOO RRRR SSSS

BBBB OOOO OOOO MMMM LLLL IIII FFFF TTTT SSSS

SSSS CCCC IIII SSSS SSSS OOOO RRRR SSSS

Contact: Walt KayTel: 540/309-1709Fax: 540/389-6507Email: [email protected]

RSC Equipment Rental 540/309-1709

©2007 Rental Service CorporationRSC is a registered trademark of Rental Service Corporation

Bet the House: Change in Vegas the Only Sure Thingting into. It helps tighten that learning curveperiod down so that we can hit the job andhit the ground running.”

And, as Josh Clauss is quick to point out,demolition contractors in Las Vegas alwayshave an eye out.

“Looking at new buildings going up,we’re studying them, how the new construc-tion is going up, because we know that 10 or15 years from now we’re going to be busylooking at how to take one down,” he says.“Inside the Las Vegas area we’re talking toclients constantly making sure we’re onboard, looking at plans and having a sense ofwhat’s going to go on in the future and whatnew building techniques and codes are andhow they’re constructed. We expect lookingat building helps us get prepared for thosefuture implosions.”

Loizeaux is circumspect when it comes tofuture projects.

“We have already budgeted implosionprojects and projected schedules for proper-ty owners and general contractors on manymajor facilities on a confidential basis,” hesays. “Often, CDI contracts directly with theowner for the implosion design and per-formance, and the local demolition contrac-tors bid to prepare the structure to CDI’s

specifications and clean-up the resultantdebris. That way, the owner retains directcontrol over and communication with CDIas respects the most visible and highest riskaspect of the demolition project.”

Loizeaux admits that the quick turn-around on structures in Las Vegas presents apredictive pattern.

“Most of the older structures are gone atthis point, and CDI is well into the implosionof the next generation of casino facilities,”he says. “We recently imploded a parkinggarage structure at Wynn that was only twoyears old. It’s construction was recognizedas temporary and CDI budgeted the sched-uled implosion of that structure directly forWynn long before ground was broken for itsconstruction. Several years ago, we implod-ed one building [wing] at the Hacienda thatwas only seven years old.”

The pace has driven the family business,he said, but in Las Vegas it’s another story.

“In other cities, like Atlantic City, wherewe recently imploded the Sands Hotel,which sat in the footprint of the TraymoreHotel, which we imploded in 1972, theLoizeaux family has gone full circle implod-ing original structures and then implodingtheir replacement structures,” he said. “Onlyin Las Vegas, however, is the velocity of the

turnaround of structures so rapid.”Goldstrum has been caught checking out

existing structures, apparently taking mentalnotes about their ultimate destruction.

“Every structure built is going to have tocome down at some point, some way,” hesays. “The owners’ decision to take down astructure, even a new one, is based on theiranalysis of return on the new structure versusthe old. Sometimes, it’s a matter of competi-tion with the next-door neighbor.

“In Vegas,” he laughs, “everything isunique.”

Keeps on GrowingHolloway of the AGCLV says that Las

Vegas is growing, and that without furtherconstruction, and demolition, the town willbe in trouble.

“There seems to be no limit to the peoplecoming here to gamble,” he says. “In the lastfew years and with current construction of$32 billion on the Strip it’ll create within afew years an additional 45,000 new hotelrooms. In order to fill those to current occu-pancy rates, which are 90 percent, you needto bring in 25 million more visitors.

“We’re also creating 120,000 new jobsover the next few years, and we’ll have tobring in those people and their families,

which means we have to provide housing forthem, and improve our transportation gridboth to bring 25 million visitors and to get120,000 families to and from work, so it’skind of a cycle. It just keeps getting bigger,”he says.

Goldstrum’s seen the rise and fall of justabout every major landmark since the citybegan. He’s a practical man, used to takingon hard labor and tough tasks.

He views the city’s tack with the detach-ment of a man who has seen enough to knowwhat’s coming.

“They won’t be here forever,” he says ofthe modern Las Vegas structures. “Back eastyou’ll see buildings 100 years old, but thatwon’t happen in Las Vegas. They’ve gonefrom pilings in the ground to great big con-crete mats to sit on.”

In the end, he said, change in Las Vegas isthe only constant.

“The whole thing changes,” he says,summarizing his outlook on demolition inLas Vegas, a town in perpetual flux, with thekind of flat truth that defies further question.

“The whole thing changes.”It’s Vegas.(This story also can be found on

Construction Equipment Guide’s Web siteat www.cegltd.com.) CEG

VEGAS from page 30


Call us at ConExpo!

MOTOR GRADERS FOR SALE!

NEW RIPPERS FOR SALE!

Caterpillar 140H2001, 2ZK, 4200Hours, Low ProCab, AC, Scarifier,1400 Tires

$159,000 ex site Texas

Caterpillar 140H2001, 2ZK, 6500Hours, EROPS,AC, New Ripper(not in photo),1400 Tires


Caterpillar 12HII2003, AMZ, 4500Hours, EROPS,AC, 14' Board,17.5 Tires

$159,000 ex site Florida

Caterpillar 12H2002, 4XM, 5400Hours, EROPS,AC, Scarifier, 1400Tires


We can container load any grader and clean for Australia for an additional charge

• Rippers and PushBlocks to fit Caterpillar12H, 140H, 143H, and 160H Machines.

• New and unused.• 3 Shanks with each ripper.• Pushblocks with nose cover available.

AVAILABLE FOR IMMEDIATE SHIPMENTFROM OUR WAREHOUSES IN DUBAI ANDHOUSTON.

ICEQUIPMENT.COMContact Rob Williams757-897-9786 Mobile757-564-1645 [email protected]

Contact David Williams941-387-6262 Mobile941-925-0783 Phone

[email protected]


Caterpillar Mans Three Booths

Caterpillar has exhibits in three different areas to demon-strate that customers can “Count on Cat Every Day.”

New products and services are presented in each of theexhibits, and live presentations are scheduled at regular inter-vals in the two equipment exhibits.

More than 40 machines and technology products dis-played represent solutions for contractors of all types, aggre-gates miners and construction materials suppliers.

The display in the North Hall, booth N2007, showsmachines for site development, road building and paving,underground utilities construction and quarry and aggregatesoperations.

The exhibit in the Gold Lot, booth G140, features smalland compact machines as well as equipment offered throughthe Cat Rental Store. The display is focused on the needs ofgeneral construction contractors and specialty trades. TheCat merchandise store also is in the Gold Lot exhibit.

The South Hall exhibit, booth S15927, features engines. Itincludes Caterpillar Industrial Power Systems, OEMSolutions and Perkins Engines.

In addition to live and video presentations, eachCaterpillar exhibit is staffed with people to guide visitors tothe appropriate place and person with answers to specificquestions.

For more information, visit the North Hall, booth N2007;the Gold Lot, booth G140; or the South Hall, booth S15927.

Case AnnouncesLoader/Backhoe Sales

Contest WinnersCase Construction Equipment announced eight winners in

its 50th Anniversary Loader/Backhoe sales contest. FourCase dealer sales representatives won for selling the mostloader/backhoes in their region during 2007. Case selectedthe other four winners in a random drawing.

The sales contest was part of the celebration of the 50thanniversary of the introduction of the Case 320, the world’sfirst factory-integrated tractor loader/backhoe. It was the firstloader/backhoe purpose-built at the plant for constructionapplications.

Each of the eight dealer sales representatives won a three-year lease on a new Ford F-150 pickup truck. The ones withthe highest number of loader/backhoe sales included:

• Frank Beck of Eagle Power and Equipment in the Eastregion

• Troy Holder of Hunt Tractor in the Central region• Douglas Buddell of Century Equipment in the West

region• Gilberte Faucher of Brisson Equipment in the Canadian

regionWinners selected in the random drawing included: Jay

Taylor of Monroe Tractor in the East region, Dan Wells ofDiamond Equipment in the Central region, Robert Mixdorfof Idaho Tractor in the West region and B.J. Cross ofHammer Equipment in the Canadian region.

“We’re proud of the hard work these winners put intomaking the 50th anniversary of the Case loader/backhoe a

resounding success,” said Jim Hasler, vice president of CaseConstruction Equipment.

For more information, visit www.casece.com.

Extec S-7 Launched inUnited States

The ConExpo 2008 exhibition is the first worldwide showattended by Extec Screens and Crushers Ltd. since it becamepart of Sandvik. The company is marking the event with theU.S. launch of the Extec S-7 mobile screen.

The largest model in Extec’s S-Series, the S-7 features thesame Doublescreen design as the smaller S-4, S-5 and S-6but boasts a triple-deck configuration together with an addi-tional side conveyor. Together with a large feed hopper withoptional double-deck vibrating grid and a set of extendedconveyors, these features make the Extec S-7 more produc-tive.

With a transport weight of 85,142 lbs. (38,620 kg), theExtec S-7 is powered by a Deutz BF4M 2012 diesel enginedeveloping 100.4 hp (74.9 kW) that meets or exceeds allknown emissions regulations.

The Extec S-6, which is 59.75-ft.-long (18 m), utilizes twoindependently adjustable screen boxes that each measure 10by 5 ft. (3 by 1.5 m) to produce a large screening area forincreased efficiency.

Like the smaller S-6, the Extec S-7 is carried on a large,durable chassis that provides enhanced strength and rigidity.A self-loading hydraulic bogie provides an independenttransport capability without the need for low loaders.

To supplement the productivity and versatility of theExtec S-6, the unit is offered with a variety of optional extrasincluding vibrating and tipping grids, mild steel hopper lin-ers, overband magnet, reversible side conveyor, and a dustsuppression system.

Making an appearance at the ConExpo arena will be theExtec C-12+, the latest version of the track-mounted jawcrusher. Building upon the reputation of the original ExtecC-12, the C-12+ is designed specifically for applications inquarries, demolition sites, and recycling facilities.

The Extec C-12+ has a working length of 51.67 ft. (15.75m) and an operating weight of 105,280 lbs. (47,754 kg) It ispowered by a 350 hp (261 kW) Caterpillar C-9 diesel enginethat meets all known emissions regulations and which offersexcellent fuel economy, according to the manufacturer.

The unit’s 48- by 28-in. (122 by 71 cm) feed opening andhigh speed crushing capability allow the machine to operateat high throughput levels for optimum productivity and min-

imal bridging. As a further safeguard, the C-12+ is equippedwith an overband magnet that removes tramp iron and rein-forcing bar during crushing.

The C-12+ will be joined on the stand by an Extec E-7, aheavy-duty, track-mounted mobile screening and stockpilingsystem that is designed for use in the most demanding cus-tomer applications. Carried on a sturdy, crusher-type chassisand featuring an adjustable heavy-duty hopper, double-plat-ed apron feeder, and adjustable incline heavy-duty screenbox with high throw and vibration characteristics, the E-7 ispurpose built for arduous duties. These include the screeningof heavy overburden at a quarry face, pre-screening andscalping, recycling of construction and landfill waste, andseparation of cohesive aggregates.

For more information, visit www.extec.eu.

GOMACO IntroducesNew RCC Paver

GOMACO’s roller-compacted concrete (RCC) pavercombines the power, capacity and mobility of the GOMA-CO RTP-500 rubber-tracked placer with a GOMACO-designed RCC screed. The combination of the RTP-500 andRCC screed provides a durable pavercapable of handling theharsh, zero-slump RCCmix designs, accord-ing to the manufac-turer.

The paverwill be on dis-play inG O M A C Obooth #C5657 inthe Central Hall.

The GOMACO-designedauger-style receiving hopper onthe RTP-500 features a work-ing capacity of 4.75 cu. yd. (3.63 cu m). It was built to han-dle high-volume, end-dump paving operations.

A 14 in. (35.6 cm) diameter auger, with speeds up to 80rpm, quickly moves the material to the high-speed transferconveyor. Shaft-mounted eccentric vibrators provide vibra-tion for emptying the hopper after each load and increasematerial flowability. A 36-in. (91.4 cm) wide transfer con-veyor moves material to the rear at speeds up to 484 fpm(147.5 mpm).

The new GOMACO RCC screed was designed for vari-able width paving. The screed is sectionalized for variablewidths. It features independent 14 in. (35.6 cm) dual augerswith a sectionalized dual tamper bar for spreading and com-pacting the RCC mix. It’s capable of paving variable slabdepths with a hydraulic crown adjustment to meet the pro-ject’s design specifications. Hydraulic variable control ofscreed vibration ensures proper mix consolidation.

The screed also was designed to be serviceable. All of theRCC screed’s wearable items were designed for fast replace-ment. Also, removable covers on the screed and its frontstrike-off wall allow easy access to maintenance points.

The RCC screed attachment adds to the RTP-500 versa-tility. The operator’s station can be positioned in one of fivelocations for visibility. The RTP-5OD is propelled by a fric-tion-drive track system with a travel speed up to 9 mph (14.5kmh) for job-site mobility and an operating speed up to 110fpm (33.5 mpm).

For more information, visit www.gomaco.com.

The S-7 features the same Doublescreen design as thesmaller S-4, S-5 and S-6 but boasts a triple-deck config-uration together with an additional side conveyor.

A conceptdrawing of

GOMACO’s newroller-compacted

concrete (RCC) paver.

see CONEXPO page 56


Visit Us At Booth C-4161

Dealer Inquiries Welcome • Dealers Nationwide - Call Your Local Dealer!


Volvo ConstructionEquipment’s Road

Machinery Sports VolvoYellow and Grey

Volvo Construction Equipment acquired the road machin-ery business from Ingersoll Rand in April of 2007, and byagreement, the equipment was not required to appear in newVolvo colors until the end of April 2008. But, by the end of

2007, Volvo road machinery began coming off the produc-tion line around the world in the Volvo yellow and grey andcarrying the Volvo brand.

The official unveiling of the new-look product range willtake place at the Volvo Construction Equipment ConExpoexhibit — North Hall 2509 — on Tuesday, March 11, at 9:30a.m. Volvo Road Machinery president, Pat Olney, will hostthe unveiling.

Machines modeling the new look at the show will be thesingle drum Volvo SD116D compactor, the double drumVolvo 138HF asphalt compactor, the single drum Volvo SD-25 soil compactor, the Volvo PH6170 and Volvo PF6110asphalt pavers and the Volvo MW500 milling machine.

“Road construction and maintenance are essential in allparts of the world. Proper infrastructure is a key enabler toeconomic development,” said Olney, “and we take pride insupporting the construction of the world’s roadways with thefinest machines in the industry … and in seeing Volvo equip-ment at work every day on our streets, roads and highways.”

For more information, call 828/650-2000, visit North Hall2509 or visit www.volvo.com.

AEM Hosts U.S.Commerce Dept.

Manufacturing HeadAdmiral Woody Sutton, the U.S. Department of

Commerce (DOC) Assistant Secretary for Manufacturingand Services, will join the Association of Equipment

Manufacturers (AEM) at ConExpo-Con/AGG 2008. Sutton is charged with advancing the interests of the man-

ufacturing and service sectors within the federal govern-ment. He took office in mid 2007. Key issues include foster-ing a strong economic environment, competitiveness, openmarkets and enforcement of trade laws.

The Administration has signed three free trade agreementsthat are still awaiting Congressional approval: two for theLatin American countries of Colombia and Panama, and onewith Korea, which is the United States’ seventh largest trad-ing partner.

“ConExpo-Con/AGG is an ideal showcase for AssistantSecretary Sutton to become acquainted with the enormoussize and scope of the construction equipment industry,”noted AEM President Dennis Slater. “ The show’s 2,000-plus exhibitors represent the full range of companies frommultinational ‘giants’ to small start-up firms with a nicheproduct or service.”

AEM officials will discuss with Sutton the challenges thatequipment manufacturers face competing in world markets,and the importance of increased diligence to advance freetrade agreements and other trade-friendly legislation.

“Our industry’s companies, from large to small, rely onexports to offset softness in domestic business, and the abil-ity to trade freely across borders is more important than everin today’s economic climate,” noted Slater. “Free tradeagreements such as those now pending expand markets forour companies’ products so they can keep factories runningto support jobs and taxes in their communities.”

For more information, call 866/AEM-0442 or visitwww.aem.org.

By the end of 2007, Volvo road machinery began com-ing off the production line around the world in theVolvo yellow and grey and carrying the Volvo brand.

CONEXPO from page 54

see CONEXPO page 58

Wheel LoadersDoosan Mega 160 2 yd........................................Please CallDoosan DL200 2.5 yd ..........................................Please CallDoosan DL300 4 yd ............................................Please Call

Over 50 Excavators in Stock!!Doosan 140-5C 2005, Front Blade ..................................CallDoosan 140-5C 2006, Front Blade ..................................CallDoosan DX340LC 2007, Very Low Hours........................CallDoosan DX300LC 2007, 48" Bucket........................$169,500Doosan 140-5 2003, Quick Coupler ..........................$69,500CAT 320CL 2000, Clean ............................................$79,000CAT 307C 2001, Rubber Tracks ................................$28,000Kobelco 150-6 1999, Clean ......................................$44,000CAT D5C 1996, Wide Pad Rops ................................$38,000

SPECIALSOver 500 pieces of equipment

to choose from

Check for Internet Specials

Every Week.

Track Specials for your Skid Steer & Track Loaders

IN STOCK

Rubber replacementtrack & undercarriage

parts availablefor most makes & models

Lano Equipment, Inc.3021 W. 133rd St.Shakopee, MN 55379 952-445-6310

Lano Equipment, Inc.6140 Highway 10 NW Anoka, MN 55303763-323-1720

Special Financing AvailableVisit Us at www.lanoequip.com

888-448-5266

Your Construction Equipment Headquarters:


www.constructioncraneandtractor.comRepresenting these top-of-the-line manufacturers:

Wirtgen America • Hamm • Etnyre • Midland • Vogele America

The Highway Equipment Authority1545 Hook Road, Folcroft, PA 19032 • voice 610.586.2710 • fax 610.586.2740300A S. Randolphsville Road, Piscataway, NJ 08855 • voice 732.752.2828 • fax 732.752.1180

• Milling Machines • Asphalt Pavers • DistributorTrucks • Road Wideners &Attachments

Authorized Distributors for:

CC&T is the Number One Milling Machine Dealer in the U.S.A. Contact Bill Barry Office: 610-586-2710 Cell: 610-637-5311

MILLING MACHINESModel Year Hrs Condition Width PriceWirtgen W1200FT 2000 2000 Good 48" $175,000Wirtgen W1200FT 2006 320 Excellent 48" $299,000Wirtgen W1900 2004 900 Excellent 24' 36' 48' CALLWirtgen W2000 1999 3900 Very Good 79" CALLWirtgen W2000 2002 2700 Very Good 79" CALLWirtgen W2000XL 2004 2300 Excellent 87" CALLMarini MP1300 2007 100 Excellent 51" CALLMarini MP1300 2007 200 Excellent 51" CALL

OTHER MACHINES2007 Vogele 2216T, 8' to 15' Paver ....................................................................................................................................................CALL2004 Vogele 880 RTB, 2000 hours, very good condition ..................................................................................................................CALL2007 Midland SPR-6, Spreads up to 6' on right ..............................................................................................................................$89,0002007 Midland SPD-8, Spreads up to 8' left and right ....................................................................................................................$129,0002007 Etnyre Centennial Distributor Truck, Choice of Ford, International and Sterling ..........................................................CALL1988 Etnyre, 1,750 Gallon Distributor..............................................................................................................................................$25,000

• VibratoryCompaction Rollers

All RoadsLead To

CC&T ForPaving,

Compaction & Milling

Equipment

Wirtgen

Milling MachinesWirtgen

Milling Machines

Vogele

Asphalt PaversVogele

Asphalt Pavers Hamm VibratoryCompaction Rollers

Hamm VibratoryCompaction Rollers

Etnyre Distribution

Trucks

Etnyre Distribution

Trucks

MidlandRoad Wideners& Attachments

MidlandRoad Wideners& Attachments

SOLD

SOLD

SOLD


Giberson to ShowcaseFour Eco-Crushers

Giberson Enterprises, based in Shamong, N.J., is display-ing all four of its Eco-Crusher excavator-mounted jaw crush-er buckets — the BF60, BF70, BF90 and BF120 — at BoothNo. 510 in the Silver Lot.

Giberson is using the majority of its booth space as ademonstration area, crushing recycle and concrete materialwith the BF90 crusher bucket running on a new Kobelcoexcavator. Recycle, demolition and concrete contractors, aswell as aggregate producers, will be able to experience first-hand how the Eco-Crusher scoops and crushes material thatcontractors typically pay hundreds of dollars per truckload tohaul away.

The Eco-Crusher line includes the BF60 for 18,000-lb.(8,165 kg) or larger excavators; the BF70 for 28,000-lb.(12,700 kg) or larger excavators; the BF90 for 48,000-lb.(21,772 kg) or larger excavators; and the BF120 for 68,000-lb. (30,844 kg) and larger excavators.

Production rates range from 15 tph (13.6 t) on the small-est bucket up to 99 tph (89 t) on the largest.

The bucket is designed to crush material with a maximuminput product thickness of 15 in. (38 cm) minus for recycleand 10 in. (25 cm) for aggregate into an end product thatranges from 6 in. (15 cm) down to 1-in. (2.5 cm) minus —depending on the Eco-Crusher bucket size and closed-sidesetting configuration.

For more information, call 609/268-3451, visitwww.ecocrusher.com or visit Booth No. 510 in the SilverLot.

The prototype Volvo hybrid wheel loader is the first iteration of Volvo’s ongoing development process.

The Eco-Crusher line includes the BF60 for 18,000-lb.(8,165 kg) or larger excavators; the BF70 for 28,000-lb.(12,700 kg) or larger excavators; the BF90 for 48,000-lb. (21,772 kg) or larger excavators; and the BF120 for68,000-lb. (30,844 kg) and larger excavators.

CONEXPO from page 56 Volvo Construction Equipment to ExhibitRebranded Range of Road Machinery

ConExpo-Con/AGG 2008, IFPE 2008 Offer Servicesto Assist International Visitors

Volvo Construction Equipment (Volvo CE) will be one ofthe biggest exhibitors at this year’s ConExpo, occupyingnearly 43,000 sq. ft. of space.

One of the industry’s most anticipated new products at theshow will be on display: the prototype Volvo hybrid wheelloader. The “mild” diesel-electric hybrid drive system fittedto a L220F wheel loader is the first iteration of Volvo’s ongo-ing development process — but its reduced levels of emis-sions and fuel consumption are indicators of the potentialenvironmental and economic benefits such hybrid systemsoffer, according to the manufacturer.

Technical innovation will be joined by design innovationon the stand: Volvo designers have been tasked with imagin-ing the articulated hauler of the year 2020 — the radical“Centaur” concept design is the result.

Another highlight of Volvo’s participation at ConExpowill be the official unveiling to a global audience of the com-pany’s new-look road machinery product range, now mar-keted in the Volvo corporate livery of yellow/grey and carry-ing the Volvo brand.

Under the theme of “More Care. Built In”, the indoor

exhibition space N-2509 will be home to 28 of Volvo CE’slatest machines: including F-Series wheel loaders, C-Seriesexcavators (including the new ECR models), Volvo PL-Series pipe layers and E-Series articulated haulers, featuringthe “Full-Suspension” systems.

The company will exhibit its growing compact equipmentproduct line in an 11,000 sq. ft. (1,000 sq m) outdoor area (G-134) where a further 18 compact machines will be on dis-play.

Machines will be arranged in application-specific clusters(such as quarrying or general construction); highlightingVolvo’s increasing customer segment focus and demonstrat-ing how Volvo machines are designed to work as “systems”rather than in isolation. Customer support will be integratedinto these “hard” machine segments, with themed kiosksfocusing on Volvo CE “soft” products and services.

The Volvo CE exhibit also will include a fully-equippedVolvo Rents rental center and a Volvo CE MerchandiseStore. Volvo Financial Services also will be represented.

For more information, call 828/650-2043, visit G-134 inthe outdoor area or visit www.volvo.com.

In recognition of the global scope of the ConExpo-Con/AGG and IFPE co-located expositions, the 2008 showsoffers a variety of services to facilitate the participation ofinternational visitors.

Select information was available in world languages inboth print format and online on the shows’Web sites. OnlineInternational Visitor sections provided details on registering,applying for visas, requesting official letters of invitation andjoining or organizing international delegations to attend theevents. The shows also provided assistance with travel andhousing arrangements for international guests, individualvisitors as well as delegations.

The ConExpo-Con/AGG 2008 and IFPE 2008 Web siteshave links to U.S. embassy and consulate Web sites whichoutline information on what documents are required for thevisa application, associated interview and entry into theUnited States.

ConExpo-Con/AGG and IFPE show management haveencouraged all international show participants who neededvisas to initiate the application process well in advance of theshows.

Several education sessions for ConExpo-Con/AGG 2008are being offered with simultaneous interpretation in threeworld languages: Russian, Spanish and Portuguese.

The shows is operating a comprehensive International

Trade Center on-site, with services including interpreters flu-ent in major world languages, message centers, phone/fax/e-mail access, meeting rooms and a lounge area. U.S.Department of Commerce representatives are on hand toprovide import and export counseling for interested atten-dees and exhibitors. There also is a special internationalattendee registration area designed to serve the needs of theglobal visitor.

As part of its official show directory, ConExpo-Con/AGG2008 and IFPE 2008 have produced an Export OpportunitiesGuide (print and electronic versions available) for distribu-tion to U.S. Commerce Department international posts. Theguide is designed to help attendees easily locate companiesinterested in doing business on a worldwide basis throughexport sales, agency relationships, distributor investment orjoint ventures.

The shows are among a select group invited to join theU.S. Commerce Department International Buyer Program(IBP) in recognition of their status as quality events servingindustries with excellent export potential. The IBP assistsshow management to bring international visitors to theshows.

For more information, call 800/867-6060 or visitwww.conexpoconagg.com or www.ifpe.com.

see CONEXPO page 62


A HUGE SUCCESS!

Visit www.CaseRodeoSeries.com for information on each of the events.

OVER $138,000DONATED TO

THANKS TO EVERYONE WHO HELPED MAKE IT HAPPENTo celebrate the 50th Anniversary of the first factory-integrated tractor loader/backhoe, 77 Case Construction Equipment dealers held rodeos

across North America in 2007. The Case Rodeo Series attracted 4,200 competitors, 19,400 attendees and raised more than $138,000 for

local Habitat for Humanity affiliates.

The real measure of our success are the contributions and volunteer efforts made to the local Habitat for Humanity affiliates that help build

and rehab homes for people most in need. Case dealers, operators, attendees, and media all came together to celebrate history and give

back to the community. It’s an accomplishment we are proud of, and we thank everyone involved.

© 2008 CNH America LLC. Case is a registered trademark of CNH America LLC. All rights reserved. Printed in the USA.


Pick Our Manitowoc 999 or 2250 for Your Next JobCrawler Cranes for rental, either Bare Rental or Operated Rental.

With over 30 years of industry experience, LJ’s crane, rigging, and specialized transportation services continue to provide innovative solutions and a track record of client satisfaction. LJ continues to grow into one of North America’s leading crane, rigging, specialized transportation and logistics providers.

Our business is more than equipment, it’s people.

to deliver results for your project.

If you are planning a construction project anywhere in North America, we welcome the opportunity to provide you with an estimate. Please call us at 401-944-8436 or e-mail us at [email protected].

Give Your Next Project A Lift

LJ Crane, Rigging and Heavy HaulingLJ Specialized LogisticsCranston, Rhode Island(401) 944-8436 – FAX (401) 944-8439www.ljcrane.comServing North America


Quality ~ Craftsmanship ~ Pride The Felling Style Since 1974


SALES PARTS SERVICE

FINANCING AVAILABLE

Talbert AC-20, 40,000 lb. payload capacity, 19’ Deck x 102” - Springassisted Ramps, Self Cleaning, Air Brakes - 60” Beavertail - POR

NEW 2008 Elliott L60R, 40 x 60 Platform w/Jib, 5900 Lb.Winch, Cab Windshield Guard, 2008 International 4300, Diesel, 5Speed Transmission, AC, 29,000 GVWR, FOB: NJ POR

2008 RTC8050 SII 50 Ton, 110'main boom,Block & Ball,Aux winch,28'-51' two-piece latticefly, FOB: NewJersey - POR

1997 USTCTaxi King32 Ton, 74.4' Boom,45' Jib, S/N400003447,FOB: NewJersey -POR

286 Central Ave. • South Kearny, New Jersey 07032

800-255-5512Phone 973-589-4100 • Fax 973-589-4811

E-mail: [email protected]: www.tes-inc.net

TRAILER

Authorized Dealer

ADDITIONAL EQUIPMENT FOR SALENEW RTC 8065 SII FOB: NJ ..........................................POR1998 & 1997 USTC Taxi Kings FOB: NJ........................POR2005 Shuttlelift 5560B FOB: NJ ..................................POR2004 Shuttlelift 3340B FOB: NJ ..................................POR2001 Manitowoc 1770C FOB: NJ................................PORNEW Kalmar DCD250-12LB FOB: NJ..........................POR1998 Kalmar DRD100-5256 FOB: NJ ..........................POR1998 Kalmar DCD70-40E5 FOB: NJ ............................POR1974 Link-Belt HC 218 FOB: NJ ..................................POR1961 HC-78A FOB: NJ ..................................................POR1986 Grove IND 2535 FOB: NJ ....................................POR

2008 Manitex 38124SHL, 38-ton Sterling LT-9513, 410 HP, 31' jib, enclosed cab option, FOB: New Jersey - IN STOCK

Pinnacle Packs HigherPiles With Portable

Conveyor

Superior Industries will show its portable radial stackingconveyor at booth S-670. Manufactured with set back axlesand a higher incline, the Pinnacle conveyor creates muchlarger stockpiles than standard stackers, according to themanufacturer.

Pinnacle conveyors are available in 80-, 100-, and 125-ft.

(24, 30 and 38 m) lengths with the ability to pile approxi-mately 40,000 tons (36,287 t) of material.

They come equipped with a swing axle, FD axle or tele-scoping tube axle and are available in belt widths of 30 to 42in. (76 to 107 cm).

For more information, call 800/321-1558, visitwww.superior-ind.com or visit booth S-670.

Bergkamp Unveils NewEMCAD System

Bergkamp Inc., based in Salina, Kan., is displaying thenew EMCAD (pronounced M-Kad) system on its advancedM3l0 slurry seal/microsurfacing paver at booth 544 in theSilver Lot. EMCAD — which stands for Electronic MixControl and Diagnostic system — allows contractors toquickly evaluate their production and make adjustments,while the machine is working, to more accurately calculatetheir bottom line and execute the job.

The EMCAD system simplifies material calibration andshows current and average material ratios, total material usedand material rates to efficiently track costs and production.This advanced system also assists with onboard control trou-bleshooting, and comes standard on Bergkamp’s new M3Series and is optional on its M1 full-size continuous paver.

Bergkamp also will conduct one-on-one business devel-opment meetings and display its variable width spreader boxat the show. The educational meetings will provide contrac-tors not currently in the slurry seal/micro-surfacing business

with valuable information to decide if it is right for them.With more than 20 years of experience helping contractorssuccessfully enter the slurry seal/microsurfacing market,Bergkamp can create programs specifically tailored to eachcontractor’s business.

The variable width spreader box works on slurryseal/micro-surfacing pavers. Its width expands and contractswhile placing the material, providing flexibility for anyshape job.

For more information, call 785/825-1375, visitwww.bergkampinc.com or visit booth 544 in the Silver Lot.

Pinnacle conveyors are available in 80-, 100-, and 125-ft. (24, 30 and 38 m) lengths with the ability to pileapproximately 40,000 tons (36,287 t) of material.

The EMCAD system simplifies material calibration andshows current and average material ratios, total mate-rial used and material rates to efficiently track costsand production.


see CONEXPO page 64


• Fenton, MO • Cape Girardeau, MO • O’Fallon, MO

• Quincy, IL • Caseyville, IL• Springfield, IL

22000011 CCAASSEE 8855XXTTSSKKIIDD SSTTEEEERR LLOOAADDEERRROPS, FOOT-T,12x16.5/GREAT, 67"-LONG LIP SMOOTH,1350 HOURS, GREATCONDITION, SAINTLOUIS, MO (45058) ......................$$1166,,550000

22000033 CCAASSEE 11885500KKCCRRAAWWLLEERR DDOOZZEERR,, CAB, AC, 205 HP,11'-SEMI-U, LT, 24"-GROUSER, CSK,3070 HRS, GOODCONDITION, QUINCY,IL (35335R) ....................................PPOORR

22000044 BBOOBBCCAATT TT118800RRUUBBBBEERR TTRRAACCKKLLOOAADDEERR, CAB, AC,HIGH FLOW, Q-BUCK-ET COUPLER, 67"LONG LIP TOOTH,815 HOURS, SAINTLOUIS, MO (45059) .......................$$2222,,550000

EEXXCCAAVVAATTOORRSS11999955 JJOOHHNN DDEEEERREE 669900EE--LLCC,, CAB, AC, 30"-STEEL, STIFF-A-THUMB, 42"-TOOTH & 72"-DITCH, 4800 HOURS, OVERALL GOOD CONDITION, CAPE GIRARDEAU MO (44919) ................................................................................................................................$$4422,,550000

11999999 BBOOBBCCAATT 333311EE,, ROPS, 7200lbs, R-TRACKS, QUICK ATTACH, BF-BLADE, 24" &12"-TOOTH, OVERALL GOOD CONDITION, 1140 HOURS, SAINT LOUIS MO (44722) ................................................................................................................................$$1177,,550000

22000066 DDOOOOSSAANN SSOOLLAARR 117755LLCC--VV, CAB/AC, 24"-STEEL-T, 39,000 lbs, GREAT CONDITION,370 HOURS, CAPE GIRARDEAU MO (41736)......................................................$$9999,,22000022000055 DDOOOOSSAANN SSOOLLAARR 330000LLCC--VV, CAB/AC, 32"-STEEL-T, 70,000 lbs, AUX-HYD, GREATCONDITION, 440 HRS, CAPE GIRARDEAU, MISSOURI (40495) ......................$$114499,,770000

LLOOAADDEERRSS11999988 CCAASSEE 558800SSLL BBAACCKKHHOOEE LLOOAADDEERR,, CAB, 4x4, X-HOE, FOUR STICK, CLEATEDPADS, 82"-LOADER, 24"-TOOTH, 4910 HOURS, OVERALL GOOD CONDITION, QUINCYIL (44900) ............................................................................................................$$2277,,55000022000044 CCAASSEE 558800SSMM LLOOAADDEERR BBAACCKKHHOOEE,, CAB, 4x4, X-HOE, PILOT-C, RIDE-C, D-BATT,RADIO, G-HEATER, 24"-TOOTH, OVERALL GOOD CONDITION, 2290 HOURS, SPRING-FIELD IL (44901)..................................................................................................$$4466,,55000022000033 CCAASSEE 558800 SSMM BBAACCKKHHOOEE LLOOAADDEERR,, CAB, A/C, HEAT, RADIO, 4X4, X-HOE, RIDE-C,2-LEVER DELUXE CAB, 82"-LOADER, 3680 HRS, OVERALL GOOD CONDITION,SPRINGFIELD, IL (44671)....................................................................................$$4433,,55000022000044 BBOOBBCCAATT TT118800 RRUUBBBBEERR TTRRAACCKK LLOOAADDEERR,, CAB, AC, HIGH FLOW, Q-BUCKET COU-PLER, 67" LONG LIP TOOTH, 815 HOURS, SAINT LOUIS, MO (45059) ..............$$2222,,55000011999999 BBOOBBCCAATT 886633 LLOOAADDEERR,, ROPS, LOEGERING TRACKS, 12x16.5 / GOOD, 78"-TOOTH, OVERALL GOOD CONDITION, 945 HOURS, QUINCY IL (44727) ..........$$1133,,550000

22000000 CCAASSEE 11884455CC LLOOAADDEERR,, ROPS, 12x16.5 / GOOD, 72"-TOOTH, OVERALL GOODCOND, 2690 HOURS, QUINCY IL (44908) ..........................................................$$1111,,22000011997733 CCAASSEE 11115500BB CCRRAAWWLLEERR LLOOAADDEERR,, ROPS, 1.75 CU/YD, 82"-BLADE, 16" PADS,2455 HOURS, OVERALL GOOD CONDITION, QUINCY, IL (44580) ......................$$1122,,55000022000066 CCAASSEE 442200 SSKKIIDD SSTTEEEERR LLOOAADDEERR,, ROPS, FOOT THROTTLE, 10X16.5, 66"-BUCKET INVENTORY REDUCTION ................................................................PPOORR22000055 CCAASSEE 441100 SSKKIIDD SSTTEEEERR LLOOAADDEERR,, ROPS, FOOT THROTTLE, 10X16.5, 66"-BUCKETINVENTORY REDUCTION ..........................................................................................PPOORR22000044 CCAASSEE 8855XXTT SSKKIIDD SSTTEEEERR LLOOAADDEERR,, ROPS, ROOT-T, CSK, M-DISCONN, OVERALLGOOD CONDITION, 1500 HRS (38126R) ..................................................................PPOORR22000011 CCAASSEE 8855XXTT SSKKIIDD SSTTEEEERR LLOOAADDEERR,, ROPS, FOOT-T, 12x16.5/GREAT, 67"-LONG LIPSMOOTH, 1350 HOURS, GREAT CONDITION, SAINT LOUIS, MO (45058) ..........$$1166,,550000

MMIISSCCEELLLLAANNEEOOUUSS11999933 BBEELLSSHHEE TTRRAAIILLEERR,, TANDEM AXLE, WOOD DECK, 76”-W X 192”-L, PINTEL HITCH,FLIP RAMPS, SIDE CAGE, OVERALL GOOD CONDITION, SAINT LOUIS MO (44859)....................................................................................................................................$$ 11,,00000011998833 TTRRAAIILLEERR,, TANDEM AXLE, FLIP RAMPS, PINTLE HITCH, WOOD DECK, 236"-L x79"-WIDE, GOOD COND, ST. LOUIS MO (44315) ................................................$$ 22,,55000022000055 IINNDDEECCOO 11225500 BBRREEAAKKEERR,, 1250 FT. POUNDS, TOP PLATE NOT INCLUDED, NEWBIT, ST. LOUIS, MO (42082) ................................................................................$$1155,,99550011998888 JJOOHHNN DDEEEERREE 445500GG CCRRAAWWLLEERR DDOOZZEERR,, ROPS, 8'-BLADE (6-WAY), 16"-PADS,SWEEPS, UNDERCARRIAGE/ EXCELLENT, OVERALL GOOD CONDITION, 2465 HOURS,QUINCEY, IL (44355) ..........................................................................................$$2255,,55000022000044 RRAAYYCCOO RRGG1133 SSEERRIIEESS--IIII WWAALLKK BBEEHHIINNDD SSTTUUMMPP GGRRIINNDDEERR,, HONDA GX390, 13hp,PULL START, UNIT IS NEW, ST. LOUIS, MO (37546) ............................................$$33,,22000011999966 SSUULLLLIIVVAANN 445500 AA//CC,, 450 CFM @ 100 PSIG, 2290 HOURS, ST. LOUIS, MO (4110)..................................................................................................................................PPOORR

For Information Contact Ted Rose at 800/325-3322 www.lubyequipment.com

22000033 CCAASSEE 558800 SSMMBBAACCKKHHOOEE LLOOAADDEERR,,CAB, A/C, HEAT, RADIO,4X4, X-HOE, RIDE-C, 2-LEVER DELUXE CAB,82"-LOADER, 3680HRS, OVERALL GOODCONDITION, SPRING-FIELD, IL (44671).....................................$$4433,,550000

22000055 DDOOOOSSAANNSSOOLLAARR 330000LLCC--VV,CAB/AC, 32"-STEEL-T,70,000 lbs, AUX-HYD, GREATCONDITION, 440HRS, CAPEGIRARDEAU, MIS-SOURI (40495) ...........................$$114499,,770000

11998888 JJOOHHNN DDEEEERREE445500GG CCRRAAWWLLEERRDDOOZZEERR,, ROPS, 8'-BLADE (6-WAY), 16"-PADS, SWEEPS,UNDERCARRIAGE/EXCELLENT, OVERALLGOOD CONDITION,2465 HOURS, QUINCEY,IL (44355) ......$$2255,,550000


PM Group ShowcasesIts 35LC USA

PM North America LLC, sales branch of PM GroupS.p.A. is showing one of its best sellers on the NorthAmerican market: the 35LC USA.

PM North America LLC also is showing a brand newcrane, a model of the 85SP series: the 85027SP+J1204.20.

35LC USA The 35LC USA is a PM series especially developed for

the North American market. It is equipped with two separat-ed hydraulic control valve blocks, which are linked to twodifferent pumps, that allow the crane to move faster and bemore productive than a crane with a single valve block.

The 35LC USA is used for loading and unloading of con-crete precast blocks.

It is equipped with a top seat control station, whichenables the operator to have a good view while working,reducing damages made by operator’s mistakes, accordingto the manufacturer.

85027SP+J1204.20The 85SP is the most powerful crane in PM’s product

range. It is equipped with continuous slewing system andPM Power Tronic electronic management system.

The 85027SP+J1204.20 is able to reach a maximumworking height of 108 ft. (33 m) loading 2,010 lbs. (910 kg).

This model offers to the operator loading power undertotal control due to the PM Power Tronic System that pro-vides a continuous flow of information visualized on theremote control screen and on the central unit, installed on thecolumn of the crane.

For more information, visit www.pm-group.eu.

Fintec 1440 Makes U.S.Debut

The official U.S. launch of the Fintec 1440 track mountedmobile impact crusher is taking place at ConExpo 2008.

Powered by a fuel-efficient Cat C-13 diesel engine, theFintec 1440 is carried on a maneuverable tracked undercar-riage and incorporates a Sandvik PR301D impactor with afluid clutch drive.

Fed via a two-deck pre-screen, the crusher is a four ham-mer open-style rotor with a pair of hydraulically adjustableimpact curtains that together deliver high outputs in materi-als including granite, slate, limestone, brick and asphalt.

A relatively low weight and compact dimensions — theunit has an operating weight of 109,790 lbs. (49,800 kg) andis 50.85 ft. long (15.5 m) in transport configuration — meansthe Fintec 1440 is transportable in a single load, allowing itto be readily moved and redeployed for maximum utiliza-tion.

Optional extras include a dolly unit, belt scales, and radioremote controls.

Representative ModelsAlong with the all-new 1440, the Fintec product range

will be represented by the 1107 and 542 models. The Fintec1107 track-mounted jaw crusher is mounted directly onto thesturdy chassis via four pins to reduce frame stress levels andgive a longer working life, according to the manufacturer.

Hydrostatically driven, the crusher can easily be reversedto free blockages, while maximum clearances below thecrushing chamber and along the discharge conveyor aidserviceability still further. Close side setting wedge adjust-ment is hydraulically actuated, down to just 1.57 in. (4 cm)in recycling applications.

A comprehensive range of optional extras include a cen-tral automatic lubrication system, belt protection platesbelow the crusher, Hardox wear plates on the hopper wallsand remote control options.

The Fintec 542 track-mounted mobile screen is designedspecifically for the recycling and contractor markets.

Powered by a Cat 3054C water-cooled diesel with anengine shut down protection system, the machine is carriedon a heavy-duty tracked undercarriage and incorporates a

large capacity two-bearing screen box with increased screen-ing angle built into the bottom deck. Together with a largescreening surface area and long throw on the screenbox, thisdelivers enhanced screening efficiency and throughput.

The machine’s belt feeder is fitted with a radio controlledtipping reject grid as standard, while a folding access walk-way around the screenbox provides easy maintenanceaccess.

Galvanized moving parts and an oven-baked two-packpaint finish protect the machine from abrasion and corrosion,making it ideally suited to applications in sand, gravel, lime-stone, coal, soils, ores and construction and demolitionwaste.

For more information, visit www.fintec.com.

Barlow MarketingGroup to Discuss

Manufacturers’ GrowthA hands-on strategic planning, sales development, chan-

nel management, research, marketing and internationalexpansion solutions company, Barlow Marketing Group(BMG) works solely in the construction, mining and aggre-gate, environmental, demolition and recycling markets.During ConExpo-Con/AGG 2008, BMG will not only con-tinue to partner with its clients at the show, but it will exhib-it its capabilities in its own booth.

Visitors who stop by booth No. C-4742 will learn aboutthe company’s ability to help organizations grow throughhands-on implementation of ideas and strategic plans,according to the company.

For more than 15 years, BMG has provided solutions formanufacturers and service providers in North America andworldwide. BMG’s experience includes equipment for lightconcrete, rental, road building, aggregates, mining, trench-ing, control systems, compaction, building materials, greenwaste, demolition, recycling and critical consumables.

A long-time member of several industry associations,BMG is currently active on the Association of EquipmentManufacturers’ (AEM) Membership Committee; the com-pany also has participated in the AEM International andMarketing Councils.

The company is a member of the National Stone, Sand &Gravel Association (NSSGA), Associated EquipmentDistributors (AED), Scaffold Industry Association (SIA) andConstruction Writers Association.

In addition, BMG participates in many industry eventsand trade shows, including the AED’s Executive Forum andCONDEX, ConExpo-Con/AGG, bauma, ICUEE,MINExpo, World of Concrete, World of Asphalt, Intermatand American Public Works.

Management personnel are frequent industry event speak-ers, including AEM international and marketing events, CoalPrep, MineWest, VDMA (the engineering and manufactur-ing association for German manufacturers), market-specificevents and numerous manufacturers’ events.

For more information, call 260/422-7100, or visitwww.barlowmktg.com or visit booth C-4742.

Powered by Cat C-13 diesel engine, the Fintec 1440 iscarried on a maneuverable tracked undercarriage andincorporates a Sandvik PR301D impactor with a fluidclutch drive.

PM North America will showcase the 35LC USA and the85027SP + J1204.20.


see CONEXPO page 66


SALES • SERVICE • PARTS 435 S. 59TH AVE., SUITE 110 • PHOENIX, AZ 85043

1-877-TWI-TRKS • 602-233-3713www.truckworksinc.com

CALL FOR INVENTORY BLOWOUT SPECIALS!

Truck Works, Inc.

“Trucks That Work”

WATER PULLS5000-10,000 GALLONS

WASTE OIL RECOVERY TRUCKS2000-4000 GALLONS

LUBE/FUEL TRUCKSSINGLE/TANDEM AXLE

TANDEM AXLE WATER TRUCKSSINGLE AXLE WATER TRUCKS

1500-4500 GALLONS

FIRE TENDERS1500-4500 GALLONS

VACUUM TRUCKSSINGLE/TANDEM AXLE1000-4000 GALLONS


Dressta Showcases TD-40E EXTRACrawler Dozer

Dressta NA has introduced the TD-40E EXTRA crawlerdozer featuring a quieter, environmentally friendly,Cummins QSK19 Tier III engine. This new model deliversan enhanced drawbar pull resulting from a higher maximumtorque of 1,755 ft.-lbs. (2,380 Nm), up from the 1,650 ft.-lbs.

(2,237 Nm) of the previous model.The new engine delivers 515 net hp (384 kW) at 2,000

rpm. Engine displacement continues at 1,150 cu. in.The TD-40E EXTRA has an operating weight of 136,509

lbs. (61,919 kg) and a full-U blade capacity of 29.8 cu. yd.(22.8 cu m).

The cooling module has a two-speed fan with a 50 in. (127cm) diameter blade to handle the cooling characteristics ofthe new Tier III engine. The low speed fan conserves powerwhile providing a quieter operation when working withlighter loads or to deliver an extra boost of power for shortperiods under heavy load conditions.

Also released with the TD-40E EXTRA are a gear rangepreselection system and an automatic downshift function,which offers the operator the choice of various automaticoperating modes; especially useful in repetitive cyclicaloperations, according to the manufacturer.

Cab Offers All-Day ComfortContributing to a comfortable full day of work is the stan-

dard six-sided cab, which offers a deluxe interior withenhanced all-around visibility. The two doors and slidingside and rear windows provide increased viewing from with-in the cab. To go along with the large view area out of thecab, blade and ripper sight lines make it easier for the opera-tor to have precise control of the machine.

The cab is sealed and has a built-in air re-circulation sys-tem. It has a sound suppression system and is separated fromthe engine compartment for a quieter, more comfortable ride.

The air-suspension operator’s seat is adjustable andequipped with full arm rests and a 3-in. retractable seat belt.The seat swivels 14 degrees to the right for better blade andripper viewing and enhanced controllability designed toreduce operator fatigue.

Two-Speed Geared SteeringThe combination of a three-speed transmission with two-

speed (Hi/Lo) steering yields six forward and reverse groundspeeds for increased load matching capabilities. The TD-40EEXTRAhas a single-lever joystick control that combines thefunctions of three levers into a single joystick.

Advanced Motion Control Dressta engineers have combined the hydraulic control

system on the TD-40E EXTRA with solid-state electroniccircuitry in an electrohydraulic motion control system.

All control functions are activated by moving the joystickor by pushing a control button located on the face of the joy-stick.

Ease of OperationThe joystick control provides up and down shifting of the

transmission, Lo or Hi range selection of both left and righttrack drives, or full power geared turns. Pushing the right orleft rocker switch selects the desired Hi or Lo range.

Moving the joystick forward or backward moves thedozer in the same direction — a Front/Rear (F /R) detent pro-vides hands-free motion. Moving the joystick left or rightactivates clutch-brake or pivot type turns.

Enhanced Maintenance and ServiceabilityA rear platform located behind the fuel tank aids in refu-

eling, air conditioning filter changes and cab rear windowcleaning to enhance serviceability. Maintenance on theDressta TD-40E EXTRA includes a 500-hour oil changeinterval. The air conditioner condenser has been moved tothe rear of the cab roof for easier access.

For more information, visitwww.dresstanorthamerica.com.

The TD-40E EXTRA crawler dozer delivers anenhanced drawbar pull resulting from a higher maxi-mum torque of 1,755 ft.-lbs. (2,380 Nm), up from the1,650 ft.-lbs. (2,237 Nm) of the previous model.


see CONEXPO page 68

DOES IT IN A SINGLE STEP!


309.691.4199www.on-siterecycling.com

RETHINKING RUBBLE

Inventory Available Inventory Availablefor Immediate Delivery!for Immediate Delivery!

Inventory Available for Immediate Delivery!

RM100RM100RM100

RM60RM60RM60

RM80RM80RM80

TS3600TS3600TS3600

CS3600CS3600CS3600


innovations related to the customer’s project and do materialanalysis, product specifications tests, system capacity checksor whatever is required.

One of Grasan’s newest developments is a line of large,track-mounted primary crushing plants that each will belargely custom designed and built to meet individual cus-tomer needs and specifications for high-production aggre-gate applications. These plants can be built around any crush-er — impactor or jaw — that best fits the customer’s opera-tion.

For more information, visit www.grasan.com or visitbooth C-6013.

One of Grasan’s newest developments is a line of large,track-mounted primary crushing plants that each willbe largely custom designed and built to meet individualcustomer needs and specifications.

see CONEXPO page 70

GGrraassaann HHiigghhlliigghhttss AAggggrreeggaatteeCCrruusshhiinngg SSyysstteemmss

At booth C-6013, Grasan of Mansfield, Ohio, will highlight its custom design capa-bilities in road-portable, pit-portable and stationary equipment and systems for crush-ing, screening, handling and storage of aggregates; recycling of concrete/asphalt rub-ble; conveying and stacking; and special applications in bulk material handling andprocessing.

Grasan can engineer and manufacture specific equipment or total systems to thecustomer’s specifications and/or job application, and can interface with an existingoperation or provide a completely independent facility from concept to startup.

Grasan engineers will research equipment, processes, recent developments and


SSuubbssccrriibbee ttooCCEEGG ttooddaayy......

GGeett aann eeddggee oonn yyoouurr ccoommppeettiittiioonn!!Construction Equipment Guide subscribers are the best informed about construction news, construction equipment, sales, auctions, equipment prices,trends and changes in the industry and activities of its people.Call Toll Free! We now accept Visa, Mastercard & American Express!

SUBSCRIPTIONS:

470 Maryland Dr. • Ft. Washington, PA 19034Email: [email protected]

TOLL FREE 1-800/523-2200FAX 215/885-2910

®

CARDMEMBER’S NAME _________________________________________________________

COMPANY NAME _______________________________________________________________

STREET____________________________________ PHONE NO. ________________________

CITY ______________________________________STATE _______ ZIP ________________

TYPE OF BUSINESS _____________________________________________________________

Check Enclosed VISA MASTERCARD American Express

CARD NUMBER

EXP. DATE(Mo./Yr.)

SIGNATURE OF AUTHORIZED CARDHOLDER

One Year $65(within United States & Puerto Rico Only)

Northeast Southeast Midwest West


AmericanContractorsEquipmentCompany

Phone: 412-828-6960 • 888-324-5135FAX: 412-828-6285

www.americancontractors.com

Serving Customers Since 1961

SKYTRAK Model 6036

SKYTRAK Model 6042

LULL Model 644-42

JLG Compact Telehandlers

* Winter Telehandler Specials** Winter Telehandler Specials*

Unit No. Year Hours Price154 2003 w/cab 2,034 $36,000 or $721/mo.139 2004 2,252 $32,000 or $641/mo.

T129 2004 1,645 $39,000 or $782/mo.149 2005 486 $39,000 or $782/mo.150 2005 1,223 $36,000 or $721/mo.102 2006 887 $53,000 or $1,062/mo104 2006 446 $54,000 or $1,082/mo.

Unit No. Year Hours Price1116 2007 w/cab 266 $62,000 or $1,242/mo.1120 2007 151 $64,000 or $1,283/mo.1115 2007 134 $61,000 or $1,222/mo.

Unit No. Year Model Hours Price1103 2007 G5-19A w/cab 277 $53,000 or $1,062/mo.1112 2007 G6-23A w/cab 522 $51,000 or $1,022/mo.1114 2007 G6-23A 314 $53,000 or $1,062/mo.

* Hours are approximate & all units are subject to prior sale. Payments based on 7.5% for 60 months.Sales tax, filing and documentation fees additional. Rates are subject to change.

Sale ends when the first 8 units are sold!SALES • RENTALS • PARTS • SERVICE • TRAINING

Unit No. Year Hours Price471 2000 2,034 $54,000 or $822/mo.478 2006 721 $54,000 or $1,082/mo.479 2006 317 $53,000 or $1.062/mo.482 2007 w/cab 74 $78,000 or $1,563/mo.483 2007 68 $78,000 or $1,563/mo.484 2007 30 $76,000 or $1,523/mo486 2007 51 $77,000 or $1,543/mo.

SOLD


Hitachi IntroducesZXLink Telematics

ExcavatorsHitachi Construction Products will roll out two new exca-

vators at ConExpo 2008, as well as showcase the company’sZXLink telematics machine monitoring system.

Located in the North Hall of the Las Vegas ConventionCenter, booth N-1541, Hitachi will display the new reduced-tail-swing Zaxis 135US-3 and the new Zaxis 220W-3wheeled excavator equipped with a wrist attachment.

In addition to these new models, there will be a Zaxis350LC-3 and the large 92.5-ton (84 t) Zaxis 850LC-3equipped with the Ultimate version of ZXLink.

Zaxis 135US-3The ZX135US-3 replaces the 135US. Incorporating Tier

III emission standards, the new 135 comes with the CRES IIcab, which is larger than before and has a wider seatback,more legroom, and more glass on the right-hand side forimproved visibility. Low-effort, short-throw levers are easyto use. This fingertip control also reduces operator fatigue.The multilingual widescreen LCD color monitor providesmaintenance, attachment, and operational information.

An optional air-suspension heated seat also is available. The cab is prepped for auxiliary hydraulics. Due to regen-

erative hydraulics, arm roll-in and the boom lower/arm

movement are faster. Travel speed has been increased.Multifunction operations are smoother because of the

HIOS III system, which further enhances precise, smoothcontrol.

The new ZX135US-3 also has greater horsepower andincreased fuel economy. Some of the retained features thathelp reduce operating costs include WC thermal spraying(tungsten carbide) at the arm-bucket joint for greater wearresistance at its contact surface with the bucket and HNbushings.

Zaxis 220W-3The new ZX220W-3 also is a Tier III compliant excava-

tor that comes with wheels, not tracks. Mobile and maneu-verable, it can quickly cruise from spot to spot and is pave-ment-friendly.

In addition to the new CRES II cab and other reliability-and power-boosting improvements common to all Dash-3excavators, the 220W-3 has increased the maximum travelspeed, provided greater acceleration performance, andwidened the oscillation angle of the axles for a smoother rideover rougher terrain, according to the manufacturer.

Greater stability ensures that this machine can moveJersey barriers without the need to extend outriggers. Themachine can be customized with a variety of boom, blade,outrigger, and bucket options.

ZXLink-Equipped Zaxis 850LC-3Hitachi’s large ZX850LC-3 will be equipped with the

Ultimate version of Hitachi’s ZXLink telematics machinemonitoring system.

Available in three levels — Standard, Advanced, and

Ultimate — the Ultimate version comes standard on theDash-3 Zaxis 450, 650, and 850 excavators, with three yearsof service included in the price of the machine, when pur-chased from an authorized Hitachi dealer.

Deere-Hitachi RelationshipHitachi and Deere will share the same booth space at

ConExpo 2008. While the origins of the Deere-Hitachi rela-tionship can be traced back to the 1960s, the two companieshave maintained a joint marketing agreement since 2002.Hitachi sales, marketing, and many product-support activi-ties in the Americas are managed by the Construction &Forestry Division of John Deere. Hitachi excavators are dis-tributed and sold throughout the United States and Canadaby a growing number of dealership locations.

Deere and Hitachi produce excavators at theirKernersville, N.C., factory — a 50/50 joint venture estab-lished in 1988.

The Hitachi models produced there are the ZX200LC-3,ZX240LC-3, ZX270LC-3, and ZX350LC-3 units. All otherHitachi-branded construction excavators are produced inJapan.

The purpose-built Forester models are produced at aDeere-Hitachi jointly owned plant in Langley, BritishColumbia.

Hitachi also sells rigid-frame mining trucks and miningshovels. Trucks from the 40- to 350-ton (36 to 317 t) classare made in Guelph, Ontario. The huge mining shovels andbackhoes are produced in Japan.

For more information, visit booth N-1541 in the NorthHall.

see CONEXPO page 76


(7) 1997 OSHKOSH MIXER TRUCKS ....$34,900(5) 1998 OSHKOSH MIXER TRUCKS ....$39,900The above 12 trucks are CAT 3306 with AllisonTransmissions, 11 yd mixers with HydraulicUnfolding Chutes, AM/FM Disc Player.

MISC. MINING & CEMENT HANDLING EQUIP.Warman 26" Cyclone ........................................................................................................................$8,000Eagle Iron Works Double, 44 Inch Fine Material Washer ..............................................................$49,900ABS Jumbo HH 95 HP, 10 Inch Discharge Submersible Pump, 3500 GPM....................................$19,900(2) Fuller Bulk Handling F-K 300MM Cement Pumps, Type “M”, 400 HP Electric Motor w/Modified HopperExtensions & Flow Control Gates. Both Pumps are Used to Discharge Cement from 100t Hoppers$60,000 Ea.(1) Mack 8 Yard Grab, Model CSR CI-525/785, Remote Control....................................................$20,000

RADIO EQUIPMENT FOR SALE(9) Kenwood TK-830H radios, Frequencies 504.6375 and 504.5375 ........................................ Each $500(6) Kenwood TK-890 radios, Frequencies 504.6375 and 504.5375............................................Each $500Motorola Spectra, Ser # 276ASW0043, Model # L99ZX 346L ............................................................$500

READY MIX TRUCKS FOR SALE

PRICE REDUCED!

More information on Silvi equipment can be found atwww.SilviEquipment.com or contact Tim Kurz at215/295-0777 ext. 232Cell: 267/566-1802 email: [email protected]

(5) 2000 OSHKOSH With 375 HP MACKEngines, Front Discharge Mixers, AllisonTrans., 11 Yd. Drums, Hyd. Unfolding Chutes,Air Conditioning, AM/FM Disc Player.These Trucks Are Being Run Daily AndAre In Excellent Condition............................4 @ $75,000 Ea.1 Truck Equipped With A Trainer Cab ........................................$80,000

Directions:Wausau, WI on I-39take exit 181 west toOld Hwy 51. Drivenorth 1 mile, auctionsite on left.

CALL IN YOUR ITEMS TODAY!

Fenced & Secured Yard!Early Deliveries!

www.nitkeauctions.com715.362.6162

Terms: Check with Bank Guarantee, Drivers License Required10% Buyer’s Fee for each item $2000 or less. All who enter must register • No one under 18 permitted on sale site • WRAC #59

NITKE SALES, INC.P.O. Box 1639Rhinelander, WI 54501

Consignments Wanted!


JOHN DEERE 450DLCGuy Roof

5110 Hartridge WayGreensboro, NC 27407

[email protected]

2006 JOHN DEERE 450DLC 704.5 HRS, 72" 4.5 CY HD BUCKET,NO CWT REMOVAL, ISUZU POWER, LIKE NEW CONDITION$315,000 O.B.O.LOCATED IN: HIGH POINT, NC


DAVIS AUCTIONS, INC.

210 CHESHIRE ROAD (RT. 68)P.O. BOX 7071

PROSPECT, CT 06712(203) 758-4087 OR

1-800-201-4368www.davisauctionsinc.com

JAMES H. DAVIS, President

Scheduled 2008 AuctionDates Are:April 12, 2008

June 7, 2008

August 2, 2008

October 4, 2008

December 6, 2008

These auctions consist of equipment from utility compa-nies, municipalities, rental companies, area contractors,and others. Equipment owned by the utility companies,municipalities, and rental companies are sold in absolute.

We accept consignments up to Wednesday prior to each auction.Inspection Friday before each auction – come see what we have!

You (and us, too) may be surprised!

NNeeww HHoollllaanndd CCoonnssttrruuccttiioonn EEqquuiippmmeennttiiss bbuuiilltt ttoouugghh ttoo hhaannddllee tthhee mmoossttddeemmaannddiinngg jjoobbssiittee ccoonnddiittiioonnss..

RRuuggggeedd ccoonnssttrruuccttiioonn,, rreelliiaabbllee eennggiinneess,,lleessss ddoowwnnttiimmee aanndd sseerrvviiccee iiss aa ssnnaapp..

SSeeee uuss ttooddaayy ffoorr aa ddeemmoonnssttrraattiioonn..

1135 State Rt. 29, Greenwich, NY 12834 978 Albany-Shaker Rd., Latham, NY 12110518/692-9611 FAX 518/692-2210 518/785-3377 FAX 518/783-5362Since 1966

www.capitaltractorinc.com

CCAAPPIITTAALL TTRRAACCTTOORR IINNCC..

TTrraaccttoorrssCCaatt CChhaalllleennggeerr MM552255BB TTrraaccttoorr LLooaaddeerr,, 175 Hrs .....................................................................................................$$4499,,44000011998866 FFoorrdd 11991100//777700BB LLooaaddeerr ..................................................................................................................................$$1100,,99550011997722 FFoorrdd 22000000 GGaass TTrraaccttoorr LLooaaddeerr ..........................................................................................................................$$22,,999955

EEqquuiippmmeenntt226600”” PPiinn oonn BBuucckkeett--FFiittss 1166LLAA oorr 1177LLAA LLooaaddeerrss ...........................................................................................................$$22995511999988 BBrriilllliioonn 99 SShhaannkk LLaanndd CCoommmmaannddeerr w/Hyd. Blades...........................................................................................$$77,,990000HHaarrlleeyy SS66 PPoowweerr RRaakkee ...............................................................................................................................................$$44,,66995522000066 WWooooddss BBWW118800 1155’’ CCuutt ......................................................................................................................................$$99,,550000KKrraauussee 99 SShhaannkk CChhiieesseell PPllooww....................................................................................................................................$$11,,99995511998855 MMccCCoonnnneellll 1166’’ DDrraagg HHaarrrrooww .............................................................................................................................$$11,,550000NNHH 225566 RRaakkee ww//RRuubbbbeerr TTeeeetthh....................................................................................................................................$$11,,33995522000055 NNHH TTJJ TTrraaccttoorr RReegguullaarr DDrraawwbbaarr ..........................................................................................................................$$66000022000033 LLaanndd PPrriiddee RRCCRR22556600 PPaarraalllleell AArrmm RRoottaarryy CCuutttteerr ............................................................................................$$99,,55660011999933 NNHH 665500 RRoouunndd BBaalleerr .........................................................................................................................................$$55,,00000011997733 JJDD 333366 BBaalleerr w/Thrower....................................................................................................................................$$22,,99995522000033 JJDD 11775500 44 RRooww CCoorrnn PPllaanntteerr,, Dry Fert., Excellent ..........................................................................................$$1144,,55000022000044 NNHH 9922LLBB LLooaaddeerr w/108” Loader, Excellent Cond., Like New.............................................................................$$99,,55000011999922 LLaanndd PPrriiddee RRCCRR 11557722 RRoottaarryy CCuutttteerr ....................................................................................................................$$44995511999933 SSwweeeeppsstteerr 33pptt SSwweeeeppeerr .......................................................................................................................................$$99995511999999 KKrraauussee 22223344 DDiisskk HHaarrrroowwss 1144’’ RRoocckk FFlleexx w/new blades .................................................................................$$55,,55000022000000 LLaanndd PPrriiddee RRCCRR 22557722 RRoottaarryy CCuutttteerr ....................................................................................................................$$779955

CCoonnssttrruuccttiioonn22000011 NNHH DDCC115500LLTT DDoozzeerr,, Cab, Heat, Air, 1400 Hrs, Excellent .................................................................................$$8822,,00000022000011 NNHH DDCC110000 DDoozzeerr w/Cab and Air-1375 Hrs, Long Track...................................................................................$$4499,,55000022000044 KKaawwaassaakkii 6655ZZVV WWhheeeell LLooaaddeerr,, 2379 Hrs, Excellent.......................................................................................$$6677,,55000011999955 IIHHII 3355JJ MMiinnii EExxccaavvaattoorr....................................................................................................................................$$1122,,99000022000077 GGrroouusseerr SSkkiidd SStteeeerr SSoofftt TTrraacckkss ttoo ffiitt LL116600 && LL117700 ..........................................................................................$$11,,66000022000055 NNHH DDCC9955 CCaabb,, Wide Track, 941 Hrs ................................................................................................................$$7755,,99000022000055 NNHH EEHH5500..BB CCaabb EExxccaavvaattoorr,, 480 Hrs................................................................................................................$$4455,,00000011999999 NNHH 555555EE TTrraaccttoorr LLooaaddeerr BBaacckkhhooee,, 4WD, Extendible ......................................................................................$$3355,,330000

SSkkiidd SStteeeerrss22000055 NNHH LLSS118855..BB,, 78" Bucket, Hyd. Mounting Plate, w/Cab, 169 Hrs ....................................................................$$2299,,22550022000044 NNHH LLSS118800,, 78" Bucket, 2 speed, w/Cab, 586 Hrs ............................................................................................$$2244,,77000022000055 NNHH LLTT118855..BB TTrraacckk SSkkiidd SStteeeerr CCaabb,, 600 Hrs ...................................................................................................$$3377,,99000022000044 NNHH LLSS118800 2 Speed, 1080 Hrs................................................................................................................................PPOORR22000044 NNHH LLSS116600,, 900 Hrs................................................................................................................................................PPOORR

CCoommmmeerrcciiaall && LLaawwnn EEqquuiippmmeenntt11999988 NNHH LLSS5555,, 19 H.P. w/42" Mower, 42" Snow Blower, Nice ...................................................................................$$33,,22550022000033 NNHH 7722”” MMiidd MMoouunntt MMoowweerr w/Side Discharge...................................................................................................$$11,,007755

RReennttaall UUnniittss YYeeaarr EEnndd CClleeaarraanncceeNNHH LLSS116600 SSkkiidd SStteeeerr,, 338 Hrs, Excellent Cond. ......................................................................................................$$1199,,990000NNHH CC118855 TTrraacckk SSkkiidd SStteeeerr,, w/Cab, 350 Hrs .............................................................................................................$$3377,,990000NNHH EE3355 SSRR CCaabb ww//aaiirr EExxccaavvaattoorr w/18" Bucket.........................................................................................................$$3344,,990000NNHH EEHH4455 EExxccaavvaattoorr w/Cab, Hyd. Thumb, Blade, 750 Hrs ........................................................................................$$3355,,990000NNHH EEHH8800 EExxccaavvaattoorr w/Cab, Hyd. Thumb, Blade, 350 Hrs ........................................................................................$$7755,,990000NNHH DDCC8855 DDoozzeerr,, ROPS NT, 750 Hrs .........................................................................................................................$$6644,,990000NNHH DDCC9955 DDoozzeerr,, Cab, Air, Wide Track, 941 Hrs........................................................................................................$$7755,,990000NNHH LLBB7755 LLooaaddeerr BBaacckkhhooee Cab, 4wd, Extendible, Pilot Control, Fork Assembly.......................................................$$4499,,550000

FFiinnaanncciinngg AAvvaaiillaabbllee -- BBaasseedd oonn DDoowwnn PPaayymmeenntt aanndd TTeerrmm00..00%% -- 1122 MMoonntthhss -- BBAASSEEDD OONN 1100%% DDOOWWNN PPAAYYMMEENNTT22..99%% -- 2244 MMoonntthhss -- BBAASSEEDD OONN 1100%% DDOOWWNN PPAAYYMMEENNTT44..99%% -- 3366 MMoonntthhss -- BBAASSEEDD OONN 1100%% DDOOWWNN PPAAYYMMEENNTT55..99%% -- 4488 MMoonntthhss -- BBAASSEEDD OONN 1100%% DDOOWWNN PPAAYYMMEENNTT66..55%% -- 6600 MMoonntthhss -- BBAASSEEDD OONN 1100%% DDOOWWNN PPAAYYMMEENNTT

DEPENDABLE

“Peel And Stick” Engine PreheaterThe ‘peel & stick’ Universal Preheater attaches to the bottom or theside of the oil pan and converts the housing into a heattransfer element. It warms the oil without burning itmaking cold starts easy. It can be used on gearboxes,transmissions, transfer cases, water tanks and evenbulk oil tanks. The Preheater plugs into any 120 or 240volt outlet and consists of a thin silicone fiberglass padcontaining a metal grid. To install it, you clean an area onthe bottom or side of the oil pan and press the pad onto it, then use silicone to seal the edgesof the pad and place a flexible ceramic insulation pad over it. It is available in several modelsdepending on the lube capacity. A 50 watt unit sells for $42 and a 350 watt unit sells for $133.

NEW: The Universal Filter Preheater is designed for diesel fuel filter housings, for lube oil and hydraulic filters too (specify hyd. size). It wrapsaround the filter housing and reduces or eliminates the possibility of coldweather fuel gelling stopping the engine. It is easily removable and transferable and is wired for your choice of: direct current or alternatingcurrent or a convertible model combining dc and ac. A standard Universal

Fuel Filter Preheater is priced at $138.


7600 Morgan Road • Liverpool, NY 13090Office: 315-437-1977 • Fax: 315-431-0536


www.advancedcrush.comEEqquuiippmmeenntt SSyysstteemmss IInncc..

333311115555----444433337777----1111999977777777

11881155,, 22000066 CCeeddaarraappiiddss CCoobbrraattrraacckk 11330000,, 550000HHrrss ....................................................................................$$338855,,000000

11220033,, BB LL PPeeggssoonn 11116655 PPrreemmiieerrttrraakk,, 22775500 hhrrss,,RReeffuurrbbiisshheedd................................................................$$226655,,000000

11886677,, CCeeddaarraappiiddss 338800,, 44xx HHyydd LLeeggss,, SSwwiittcchhGGeeaarr && TTrraaiilleerr ((AAddddiittiioonnaall $$6600,,000000)) ................PPOORR

11773311,, DDooppppssttaaddtt DDWW33006600,, 220000 hhrrss,, WWhheeeell,, LLiikkeeNNeeww ............................................................................................PPOORR

UU117700,, CCEECC SSccrreeeenn IItt,, 550000 hhrrss ........$$9999,,000000 11773300,, 22000000 PPoowweerrssccrreeeenn TTrroommmmeell 772255,,44118899 hhrrss ........................................................$$6699,,000000

11444455,, PPoowweerrssccrreeeenn 882200,, 880000 hhrrss,, PPaannFFeeeeddeerr TTaaiill CCoonnvveeyyoorr ........................$$112233,,000000

SC

RE

EN

S

Also AvailableCCrruusshheerrss

2005 Terex Pegson 1412 Impactor, Track, 1350 hrs, Hazmag AP-PH 1214Q - CATC12, Stk# 1598............................................................................................$460,0002005 Terex Pegson 428 Trakpactor, 42"x42" Rotor - Cat C9, 1000 hrs, Stk# 1782 ..............................................................................................................................POR2004 B L Pegson 1180 Premiertrak, 32x44, 2500 hrs, Stk# 1481 ....................POR2006 Cedarapids Cobratrack 1100, 30x42, 1200 hrs, Stk# 1889..............$299,000

SSccrreeeennss2005 Powerscreen Warrior 1800, 980 hrs, Stk# 1572 ..............................$185,0002005 Powerscreen Titan, 2-Way Split, 3240 hrs, Stk# 1500 ....................$165,0002001 Powerscreen 830, 2000 hrs, Stk# 1015............................................$159,0002005 Powerscreen Powergrid, 1000 hrs, Stk# 1590 ..................................$80,0002004 Powerscreen Powergrid, 800 hrs, Stk# 1564 ....................................$75,000Nordberg Screen-All CV90, SN: 1845, 980 hrs, Stk# U103 ........................$65,000

SShhrreeddddeerrssHammel VB750, SN: 195001, 800 hrs, Slow Speed Shredder, Stk# 1395 ....................................................................................................................................$150,000

CR

US

HE

RS

WWEE SSPPEECCIIAALLIIZZEE IINN SSOOLLVVIINNGG YYOOUURR MMAATTEERRIIAALL HHAANNDDLLIINNGG PPRROOBBLLEEMMSS!!

11661155,, PPoowweerrssccrreeeenn CChhiieeffttaaiinn 11220000,, 22991100 hhrrss,,CCuummmmiinnss EEnnggiinnee ....................................................$$8855,,000000

UU4455,, 11998899 RRooyyeerr 330000,, DDeeuuttzz EEnnggiinnee ........$$2299,,990000 UU114422,, PPoowweerrssccrreeeenn PPoowweerrggrriidd 880000,, FFiifftthhWWhheeeell,, 22007744 hhrrss,, DDeeuuttzz EEnnggiinnee....................$$7755,,000000

UU115522,, EExxtteecc 66000000,, 88117777 hhrrss ............................$$3399,,990000

MOBILE AND STATIC PLANTS

UU117733,, PPoowweerrssccrreeeenn CCoommmmaannddeerr 440088,, 44774455 oorriigg..hhrrss,, nnoo hhrrss oonn rreebbuuiilltt eennggiinnee ((DDeeuuttzz)) ........$$6699,,990000

11559977,, BBrroowwnn LLeennnnooxx KKKK111144,, CCAATT EEnnggiinnee,, 44005500hhrrss ....................................................................................$$112299,,000000

UU112299,, VViippeerr 110033,, 22440044 hhrrss,, DDeeuuttzz EEnnggiinnee ................................................................................................................$$4455,,000000

0011XX0055555577,, CCaatt 776699CC,, EEnndd DDuummpp,, 9900,,776688 mmii..,,TTrraannss OOvveerrhhaauulleedd bbyy CCaatt iinn AAuugg//SSeepptt 0066 $$9988,,000000

Also AvailableU153 Retech, 3998 hours complete with 35x60" conveyor(U110) and 35x60" conveyor (U111) ......................$77,500

Being RefurbishedPowerscreen Chieftain 1800, SN: 12001765,

3-Way Split, On Tracks, 5100 hrs, Deutz BF4M102E EngineFinlay 393C Turbo, SN: FH481635, 329 hrs,

3-Way Split, Deutz BF4L913 Engine

AAddvvaanncceeddCCrruusshhiinngg

SSeerrvviicceess

WWEE SSPPEECCIIAALLIIZZEE IINN RREEFFUURRBBIISSHHIINNGGAANNDD MMAANNUUFFAACCTTUURRIINNGG MMOOBBIILLEE

AANNDD SSTTAATTIICC PPLLAANNTTSS..



One of America’s LargestManufacturer/Dealers For

Commercial Service Vehicles

IN STOCK!Ready to Work!

25 NEW FORD F550 AND F750 XLT’S! 44xx44,, UUNNDDEERR CCDDLL &&3333KK GGVVWWRR,, CCAATT && CCUUMMMMIINNSS// MMAANNUUAALL

&& AAUUTTOOMMAATTIICCSS// AAIIRR BBRRAAKKEESS 1111’’--1144’’ BBOODDIIEESSww//66,,000000 && 1100,,000000 HHYYDDRRAAUULLIICC CCRRAANNEESS,,

HHYYDDRRAAUULLIICC OOUUTTRRIIGGGGEERRSS && HHYYDDRRAAUULLIICC AAIIRRCCOOMMPPRREESSSSOORRSS,, LLOOAADDEEDD WW//OOPPTTIIOONNSS

All Major Truck Manufacturers In Stock!

Off Road Tanks AllSizes in Stock

SSeeee UUss AAtt TThheeFFoolllloowwiinngg SShhoowwss::

CONEXPOLas Vegas, NV

Blue Lot Booth B-980 March 11–15, 2008

•Hyd. Driven OilPumps

•Hanny Extreme Service OilProduct Reels

•Hydraulic DrivenAir Compressors

•Hydraulic DriveWaste OilRecovery

•Hydraulic DriveDiesel FuelPump

Worldwide Distribution Available! We Deliver Anywhere in The U.S.!


New Telsmith PA6060Primary Impact to Be

on Display

Telsmith Inc., an Astec company will introduce its newPA6060 primary impact crusher at the Astec/Telsmith boothC-5135.

Attendees will have the opportunity to talk with Telsmithproduct engineers about the features that allow the newPA6060 to tackle large quarried stone or tough demolitiondebris with ease, and at a lower cost per ton.

Built heavier than similar sized primary impact crushers,the Telsmith PA6060 is engineered to maximize crushinghours and minimize maintenance. Akey differentiating com-ponent of the PA6060 is the massive rotor, which is set onoversized, wide series bearings. The heavier rotor delivershigher inertia to optimize crushing, and the ruggedness toconsistently crush 40-in. (102 cm) stone, according to themanufacturer.

The PA6060 utilizes a modern hydraulic system to pro-vide finger-tip control of apron adjustments. A PLC allowsoperation in an auto mode that will automatically return theapron to preset spacing and track wear parts consumption.These technologies prevent damage from any uncrushablematerials, while reducing maintenance, providing greateruptime and lowering operating costs.

Additional features include a hydraulic tilting feed plate tosafely and quickly clear bridging; interchangeable andreversible mono-block aprons to reduce maintenance costsand downtime; easy access inspection doors; and a hydraulicupper frame for quick access to maintenance areas.

For versatile operation in new or existing plants, thePA6060 is available in wheeled portable, track mobile ormodular plant arrangements.

For more information, call 800/765-6601, visit www.tel-smith.com/PA6060 or visit booth C-5135.

Telsmith Debuts SBXCone Crusher

Te1smith Inc., an Astec company, introduces its newModel SBX Cone Crusher at the Astec/Telsmith Booth No.5135 in Central Hall. The Model SBX is engineered withnew internal components and crushing chamber profiles thatallow it to accept larger feed. Combining high performanceand an extra-coarse feed opening, the SBX is ideal for sec-ondary crushing circuits that once required larger crushers,according to the manufacturer.

Its features and benefits include a Dynamic Adjust systemthat enables remote adjustment under load; a maintenance-free hydraulic anti-spin system that extends manganese life,a large stroke chamber clearing system that delivers safe andquick recovery from a shutdown and heavy duty compo-nents for reliable, low cost crushing.

Although the mode1 SBX is designed for compatibilitywith any fully automated plant, SBX cone crushers can becombined with TRAC 10, a stand-alone crusher control sys-tem that cost-effectively delivers all the benefits of automa-tion without the big budget hassles of completely reworkingplant controls. The TRAC 10 remote SBX automation con-trol system allows operators to efficiently monitor crusheroperations (while protecting the crusher from overload), eas-ily make adjustments to crusher settings, and convenientlycollect operational and maintenance data — all without hav-ing to rework existing plant controls, according to the man-ufacturer.

The SBX Cone Crusher Series is available in three mod-els — the 44SBX, 52SBX, and the 57SBX — 300, 400 and

500 hp (223.6, 298 and 373 kW) respectively. For more information, call 800/765-6601, visit www.tel-

smith.com.

The Telsmith PA6060 is engineered to maximize crush-ing hours and minimize maintenance. A key differenti-ating component of the PA6060 is the massive rotor,which is set on oversized, wide series bearings.

The Model SBX is engineered with new internal compo-nents and crushing chamber profiles that allow it toaccept larger feed.

CCOONNEEXXPPOO ffrroomm ppaaggee 7700

Telsmith Introduces Quarry-Trax Track-MountedJaw Crusher — Model TJ3258

Telsmith Inc., an Astec company, is intro-ducing its new track-mounted primary jawcrushing plant — the Quarry-Trax ModelTJ3258 — at the Astec/Telsmith booth C-5135. Telsmith product engineers will be on-hand to discuss the features built into the newproduct.

Engineered to deliver higher yields withincreased reliability, the plant’s Telsmith 3258jaw crusher features a larger gape and a 58-in.-wide (147 cm) crushing chamber, boostingcrushing capacity by up to 15 percent oversimilar sized brands. New crusher featuresinclude: hydraulic adjustment, hydraulictramp iron relief and hydraulic chamber clear-ing, which reduce operating costs and allow anoperator to safely clear the crusher and returnto production in minutes, according to themanufacturer.

The new Telsmith Quarry-Trax utilizesPLC controls for ease of operation. In the automatic mode,the crusher feed is maximized by monitoring engine load,crusher load and feed bin level in order to maintain a consis-tent choke feed. The crusher setting is displayed on anonboard LCD monitor and adjustments are enabled throughpush button controls.

Handheld wireless remote maneuvers the plant and pro-vides crusher, feeder, engine and conveyor controls from a

safe distance. The new Telsmith Quarry- Trax is available with a num-

ber of options, including: a hydraulic hammer, 18-cu.-yd.(13.7 cu m) hopper extensions, a folding conveyor exten-sion, a magnet, and more.

For more information, call 800/765-6601, visit www.tel-smith.com/quarrytrax or visit booth C-5135.

sseeee CCOONNEEXXPPOO ppaaggee 7766

New crusher features include: hydraulic adjustment, hydraulictramp iron relief and hydraulic chamber clearing.

**** Construction Equipment Guide • 2008 ConExpo Special • www.cegltd.com • March 11-15, 2008 • Page 77

LLuubbee PPllaattffoorrmmss LLuubbee // FFuueell VVaann

##44008866 WWaatteerr TTaannkk LLuubbee // FFuueell PPllaattffoorrmm ##44006699 PPMM LLuubbee VVaann

• Lube / Fuel VansSStteeeell oorr AAlluummiinnuumm

• Lube / FuelPlatforms

• Fuel Trucks

• Mechanics Service Bodies

• Stock Lube Trucks• Stock Water Trucks• Stock Fuel Trucks

MMeecchhaanniiccss SSeerrvviiccee BBooddiieess

FIELD SERVICE EQUIPMENT

Visit us at the ConExpoShow,Booth# RL-44023

800-622-5429Highway 12 Cokato, MN 55321

Local (320)286-2176

2008 SDR325 SIDUMP’R TRAILER 2008 SDR325 SIDUMP’R TRAILER

BBuuiilltt ttoo LLaasstt wwiitthh TToopp ooff tthhee IInndduussttrryy RReessaallee VVaalluuee.. 4422''xx110022"" -- 110000,,000000 PPSSII DDoommeexx HHuucckk BBoolltteedd FFrraammee,, SSuuppeerriioorrTTuubb DDeessiiggnn -- 11//44"" AARR440000 HHaarrddooxxee,, NNoo DDiivviiddeerr,, RReeyyccoo AAiirrRRiiddee SSuussppeennssiioonn,, MMaaiillhhoott NNiittrraatteedd CCyylliinnddeerr,, SSttrreessss FFlleexxTTeecchhnnoollooggyy..

UpRight XR841Sale Price $35,000

Terex SS842Sale Price $32,500

Used Scissor Lifts and Booms available.• Sales – New & Used

Equipment• Parts & Service on Aerial

Lifts and RT (Telescopic)Forklifts

• Authorized Dealer: Genie,Grove, JLG, MEC, Snorkel,SkyTrak, Snorkel, Terex, &UpRight

763.428.5255Visit us @ www.indylift.net


MORE CARE. BUILT IN.

Your Spec Here, xxx......................................................................................................................................................................................................................................................................................$$$


Your Spec Here, xxx ......................................................................................................................................................................................................................................................................................$$$



Your Spec Here, xxx ......................................................................................................................................................................................................................................................................................$$$

410-242-6500 • 800-638-6012 • Fax: 410-242-7835Email: [email protected]

1999 A25C, 6,600 hours ................................POR2000 A25C, 6,500 hours ................................POR2004 A25D, 3,000 hours ................................POR2005 A30D, 2,400 hours ................................POR2006 L90E, 420 hours....................................POR2005 L150E, 5,500 hours ..............................POR2004 EC140B, 1,100 hours ............................POR2006 EC160B, 500 hours ..............................POR2004 EC240B, 1,200 hours ............................POR2005 EC290B, 1,200 hours ............................POR2005 EC330B, 2,800 hours ............................POR2005 EC460B, 2,300 hours ............................POR

Baltimore, MD4601 Washington Blvd.Baltimore, MD 21227(410) 242-6500(410) 242-7835 Fax

Manassas, VA8450 Quarry Rd.Manassas, VA 20110(703) 393-7344(703) 393-7844 Fax

Chesapeake, VA4112 Holland Blvd.Chesapeake, VA 23323(757) 485-3314(757) 485-3415 Fax

Richmond, VA1345 Mountain Rd.PO Box 1919Glen Allen, VA 23060(804) 266-0000(804) 266-1611 Fax

Roanoke, VA2025 Cook DriveSalem, VA 24153(540) 989-3750(540) 989-4164 Fax

Winchester, VA160 Kentmere Ct.Winchester, VA 22603(540) 722-3700(540) 722-4441 Fax

Wise, VA808 Norton Rd.PO Box 1158Wise, VA 24293(276) 328-8027(276) 328-2825 Fax

Bridgeville, DE17941 Sussex HighwayBridgeville, DE 19933(302) 337-3400(302) 337-9083 Fax

www.mcclung-logan.com

USED VOLVO EQUIPMENT

Manitou to Debut MHT10160 Rough-Terrain

Telehandler Manitou North America will be introducing the MHT

10160 at ConExpo in March, the first of its heavy rough-terrain telescopic forklift product line to be offered in theUnited States.

The MHT 10160 offers users 36,000-lb. (16,300 kg)maximum capacity. Capacity at its maximum lift height of31.8 ft. (9.7 m) is 15,430 lbs. (6,990 kg). Capacity at itsmaximum forward reach of 18 ft. (5.4 m) is 9,260 lbs.(4,200 kg).

The MHT 10160 is powered by a new 175 hp (130kW)Tier III Mercedes turbo diesel.

The MHT features a two-speed hydrostatic transmis-sion, which makes it both maneuverable and operatorfriendly. Combined with the high horsepower Mercedesengine it enables the MHT 10160 to deliver 34,850 ft.-lbs.(47,256 Nm) of drawbar pull.

Standard features include a fully enclosed ROPS-FOPScertified cab with heater and defroster. A high output loadsensing hydraulic system is capable of performing threesimultaneous movements with no loss of speed.

A wide range of attachments are available including a

Manitou off-road tire clamp. The MHT 10160 incorporates all of the standard operating features

of the Maniscopic line such as three steering modes and frame levelinginto a heavy duty machine. For more information, call 800/433-3304 orvisit www.manitou-na.com.

The MHT features a two-speed hydrostatic transmission, whichmakes it both maneuverable and operator friendly.

The MHT 10160 offers users 36,000-lb. (16,300kg) maximum capacity.





((AALL)) AAllbbaannyy ((551188)) 778855--88001133 •• ((AAPP)) AAppaallaacchhiinn ((660077)) 775544--66557700 •• ((HHLL)) HHoorrnneellll ((660077)) 332244--22111100 •• ((HHHH)) HHoorrsseehheeaaddss ((660077)) 773399--88774411

LLOOAADDEERR BBAACCKKHHOOEESSCCAASSEE 558800LL,, 1997, 2700 HRS, S/N JJG0238665, 4-WD, CAB, EXTENDAHOE,GP BKT, 2-LEVER, BKHOE HYD., 24” BACKHOE BUCKET, STK# UI0559, AL..................................................................................................................$$3388,,557755CCAASSEE 558800MM,, 2005, 450 HRS, SN N5C389999, TURBO, 4-WD, CAB, EXTEN-DAHOE, GP BKT, 2-LEVER, 24” BACKHOE BUCKET, NU1974, AL ........$$5599,,999955

SSKKIIDD SSTTEEEERRSSCCAASSEE 441100,, 2005, 45 Hrs, S/N N5M414053, ROPS, 10:00X16.5 TIRES, AUX.HYDRAULICS, 84” BUCKET, STK# NU1984, HL ...................................$17,995CCAASSEE 442200,, 2005, 255 Hrs, S/N N5M405539, CAB, 10:00X16.5 TIRES, AUX.HYDRAULICS, 66" BUCKET, Stk# NU1985, AP ....................................$$2200,,999955CCAASSEE 11883355CC,, 1987, 2500 Hrs, S/N 17940689, ROPS, 10:00X16.5 TIRES,AUX. HYDRAULICS, 63" BUCKET, Stk# UU1147, HL .............................$$77,,999955CCAASSEE 11884400,, 1991, ROPS, 10:00X16.5 TIRES, AUX. HYDRAULICS, 63” BUCK-ET, STK# UU1162, AL.............................................................................$$88,,440000CCAASSEE 11884400,, 2000, 6615 HRS, S/N JAF0288062, ROPS, 10:00X16.5 TIRES,AUX. HYDRAULICS, 63” BUCKET, STK# U1164, HL ..............................$$99,,999955

SSKKIIDD SSTTEEEERRSS AATTTTAACCHHMMEENNTTSSFFFFCC//SSWWEEEEPPSSTTEERR,, BBIIGG DDAAWWGG,, 2003, S/N D0323002, 74" ANGLE BROOMW/GUTTER BROOM, WATER TANK AND DUAL MOTOR (DEMO UNIT), Stk#MU1410, HH...........................................................................................$$55,,990000FFFFCC LLAAFF7766,, 2001, S/N A004497, 76" PREPERATOR RAKE (DEMO UNIT), Stk#MU1230, AP ...........................................................................................$$55,,990000FFFFCC LLAAFF11559966,, LIKE NEW, 8’ SNOW PLOW/DOZER BLADE FITS SKID STEERQUICK COUPLER, STK# UM0141, HH....................................................$$11,,999955HHOORRSSTT 8844”” BBKKTT,, ROLL OUT HIGH DUMP BUCKET W/SS BRACKET (LIKENEW), STK# UU1138, HH.......................................................................$$22,,775500HHUUSSKKIIEE HHHH550000,, 2000, RENTAL FLEET RETURN, S/N OR1204, 500 FT/LBHAMMER FOR SKID STEER, STK# MU1104, AL....................................$$44,,225500VVIIRRNNIIGG ““NNEEWW”” PPAALLLLEETT FFOORRKKSS IINN SSTTOOCCKK .........................CCAALLLL FFOORR PPRRIICCEESS

TTRRAACCKK LLOOAADDEERRSSCCAATT 225577,, 2003, 957 HRS, S/N OCMM02111, CAB, AUX. HYDRAULICS, 66”BUCKET W/BOE, STK# UI0539, AP ...........................................................CCAALLLLBBOOBBCCAATT TT330000,, 2003, 2352 HRS, S/N 521911543, 81HP KUBOTA ENGINE,80” BUCKET 2200 LB OPERATING LOAD, STK# UU1130, AL...................CCAALLLLTTAAKKEEUUCCHHII TTLL114400,, 2005, 145 HRS, S/N 21402384, 81HP W/76” BUCKET CABAND HEATER, STK# TL0011, HH .........................................................$$3377,,119955

WWHHEEEELL LLOOAADDEERRSSCCAASSEE 882211BB,, 1997, 5500 HRS, S/N JEE0053731, CAB W/AIR, 4.0 CU. YD. GPBKT, 23.5X25 RADIAL TIRES, AP..............................................................CCAALLLLCCAASSEE 772211DDXXTT,, 2006, 130 HRS, S/N JEE0140269, CAB W/AC, JRB COUPLER,3 CU. YD BKT “LOADED (RENTED), STK# IN0849, AL .............................CCAALLLLJJRRBB 4488”” CCOOUUPPLLEERR CCOONNSSTTRRUUCCTTIIOONN FFOORRKKSS ((CCAASSEE 662211//772211)),, STK# UI0532,HH ..........................................................................................................$$33,,999955

EEXXCCAAVVAATTOORRSSCCAASSEE CCXX2255,, 2004, 460 HRS, S/N DFE0001374, CAB, 24” BKT (SHARP),STK# IN0787, HH .................................................................................$$2266,,444455CCAASSEE CCXX8800,, 2005, 622 HRS, S/N DAC881229, CAB, 30” BKT, AC, RUBBERPADS, (RENTED), STK# IN0817, AL..........................................................CCAALLLLCCAASSEE CCXX221100,, 2003, 1690 HRS, S/N DAC0721595, CAB W/AIR, AUX.HYDRAULIC, 48” BUCKET, STK# UI0546, AL.......................................$$7799,,999955JJDD 116600CC LLCC,, 2004, 700 HRS, S/N 44710, CAB W/AIR, AUX. HYDRAULICS,MANUAL THUMB, 28” PADS & 30” BUCKET, STK# UI0560, AL ..........$$8899,,999955HHIITTAACCHHII EEXX220000LLCC,, 1999, 4600 HRS, S/N AMD300103, CAB W/AIR, AUX.HYDRAULIC 36” BUCKET & HYDRAULIC THUMB, STK# UI0551, HH .$$5588,,999955HHIITTAACCHHII ZZAAXXIISS 227700LLCC,, 2006, 980 HRS, S/N FF015JP010526, CAB W/AIR,HYDRAULIC, 48” BUCKET & HYDRAULIC THUMB, STK# UI0552, HH .........................................................................................................................$$117799,,000000TTAAKKEEUUCCHHII TTBB7700,, 1999, 5300 HRS, S/N 1705031, CAB W/AUX. HYDRAULICS,24” BUCKET (16,000# UNIT), STK# UI0558, AL ..................................$$2277,,449955TTAAKKEEUUCCHHII TTBB113355CCRR,, 2006, 200 HRS, S/N 13517394, CAB W/AIR, AUX.HYDRAULICS, QUICK COUPLER, 24” BUCKET, STK# TL0024, HH......$$3377,,669955

CCOONNSSTTRRUUCCTTIIOONN AATTTTAACCHHMMEENNTTSSAACCSS 33//44 YYDD BBKKTT,, 2004, SIDE DUMP BUCKET FOR ACS COUPLER BACKHOE(LIKE NEW), STK# UM0134, HH ...............................................................CCAALLLLGGEEIITTHH 3300””,, 2006, JAW BUCKET FOR CASE 580 BACKHOE “LIKE NEW”, STK#UM0139, HH...........................................................................................$$33,,335500CCFF 2244”” HHDD EEXXCCAAVVAATTOORR BBUUCCKKEETT FFOORR 99002200BB,, CX160, STK# UI0472, AL ........................................................................................................................$$33,,119955CCAASSEE 1188”” BBUUCCKKEETT FFOORR CCAASSEE 558800,, STK# UU1163, HH............................$$669955GGEEIITTHH 1122”” TTRREENNCCHHIINNGG BBUUCCKKEETT FFOORR JJDD 551100 BBAACCKKHHOOEE,, CALL BOB, HH$$339955HHUUSSKKIIEE HHHH11000000,, 2000, RENTAL FLEET RETURN, S/N 9HX635, 1000 FT/LBHAMMER FOR CASE 580/590 BACKHOE, STK# MU1121, AL................$$66,,550000HHUUSSKKIIEE HHHH220000,, 2005, RENTAL FLEET RETURN, S/N 4K591, 2000 FT/LBHAMMER FITS CASE CX160 SIZE EXCAVATOR (36,000# CLASS), STK#MU1674, AL .........................................................................................$$1188,,997755HHUUSSKKIIEE HHHH33660000,, 2001, RENTAL FLEET RETURN, S/N OM1445, 3600 FT/LBHAMMER FOR CASE CX210 EXCAVATOR (43,000# CLASS), STK# MU1282,AL .........................................................................................................$$1177,,999955

CCOOMMPPAACCTTIIOONN EEQQUUIIPPMMEENNTTBBOOMMAAGG BBWW112200AADD--33,, 2000, 452 HRS, S/N 101170514756, ASPHALT, 39”VIBRATORY DUAL DRUMS, ROPS, STK# BO0132, AL .............................CCAALLLLBBOOMMAAGG BBWW112200AADD--33,, 2000, 1980 HRS, S/N 101170514755, ASPHALT, 39”VIBRATORY DUAL DRUMS, ROPS, STK# UU1154, AL........................$$1177,,990000

CCRRAAWWLLEERRSSKKOOMMAATTSSUU DD3311EEXX,, 2004, 706 HRS, 50508, 96” BLADE, HYDROSTATICTRANSMISSION, ROPS, (REDUCED PRICE), STK# UI0526, AP ..........$$4455,,999955CCAASSEE 555500 LLTT,, 1990, 1799 HRS, S/N JAK0013974, 96” BLADE, TC TRANS-MISSION, ROPS, LONG TRACK, UNDERCARRIAGE HAS NEW SPROCKETS,STK# UU1158, AL ................................................................................$$2211,,449955CCAASSEE 665500KK WWTT,, 2005, 355 HRS, S/N CAL002329, 110” BLADE W/BRUSHSWEEPS, LIGHTS AND HYDROSTATIC TRANSMISSION (RENTAL RETURN),STK# NU1935, HL ................................................................................$$7711,,999955CCAASSEE 885500DD,, 1991, 5910 HRS, S/N JAK00028333, 104” BLADE, TC TRANS-MISSION W/POWER TURN TRACKS, BRUSH SWEEPS, RIPPER, STK#UI0541, AP ................................................................................................CCAALLLLCCAASSEE 11885500KK,, 2003, 2380, S/N HHA420109, POWER TILT “U” BLADE W/24”PADS, CAB & AC, STK# IN0750, HH .........................................................CCAALLLLCCAASSEE 885500KK WWTT,, 2005, 950 HRS, S/N CAL004830, POWER ANGLE/TILTBLADE W/ELT UNDERCARRIAGE HYDRO TRANS. WT, CAB & AC (1 YR WAR-RANTY), STK# UI0549, AL .................................................................$$110099,,995500

FFOORRKKLLIIFFTTSSCCAASSEE 558866GG,, 2005, 390 HRS, S/N JJG0292957, 6000 LB 22’ FREE LIFT MASTW/SIDE SHIFT AND 48” FORKS, STK# NU1953, HH............................$$5500,,999955CCAASSEE 558888GG,, 2005, 250 HRS, S/N JJG0292956, 8000LB 22’ MAST W/SIDESHIFT AND 48” FORKS, STK# NU1950, AL..........................................$$5555,,999955

PPAAVVEERRSSBBOOMMAAGG 881155RRTT--22,, 2006, 95 HRS, S/N 911835121032, 8-15’ PAVER, 85HPCUMMINS ENGINE, 7.5 TON HOPER, TRACK UNDERCARRIAGE, STK#IU1172, AL ................................................................................................CCAALLLL

TTRRAAIILLEERRSSTTRRAAIILL KKIINNGG TTKK2200,, 2005, TWO HRS, SPECIAL NEW, 10 TON W/AIR BRAKES,19’ FALT DECK, WOOD FILLED RAMPS, NEW LEFTOVER, STK# MU1683, HH ...................................................................................................................CCAALLLL

VVIIBBRRAATTOORRYY SSCCRREEEENNSSVVIIBBRROOTTEECCHH 4400BBOOXX,, 2007, 190 HRS, S/N 07-126-SCM, 40 SQUARE FOOTDOUBLE DECK SCREEN W/35 HP PERKINS ENGINE, STK# MU1827, HHCCAALLLL

FFAARRMM TTRRAACCTTOORRSSCCAASSEE IIHH MMXX227700,, 2000, 3758 HRS, S/N JJA0107374, 235 HP, 4-WD, DUALSALL AROUND, CAB, POWERSHIFT, STK# UA0925, HH........................$$6699,,999999CCAASSEE IIHH MMXXUU112255,, 2004, 1600 HRS, S/N ACP229181, 105-110 NET HP, 4WD,CAB, SEMI-POWERSHIFT, STK# UA0971, HL ......................................$$5577,,000000CCAASSEE--IIHH 668855,, 1986, 2546 HRS, S/N 18369, 61HP, 2WD ROPS 15.5X38 REARTIRES” SHARP” NEW PAINT, STK# UA0964, HH .................................$$1144,,999955CCAASSEE--IIHH 668855,, 1985, 1150 HRS, S/N 15807, 61HP, 2WD ROPS 15.5X38 REARTIRES, LOADER, STK# UA0972, HH ....................................................$$1166,,999955

CCOONNSSUUMMEERR PPRROODDUUCCTTSS ((CCOOMMPPAACCTTSS && AATTTTAACCHHMMEENNTTSS))KKUUBBOOTTAA BBXX11550000,, 2003, 51772, 199 HRS, 15 HP TRACTOR W/HYDROSTATICDRIVE, 4WD, 48” MOWER DECK & PTO, STK# UA0973, HH ................$$88,,885500CCAASSEE--IIHH BBXX119900,, 2005, S/N 6048, 90” DIG DEPTH BACKHOE W/FRAME KITFOR D40 TO D45 TRACTORS, STK# UA0968, HH..................................$$44,,999900FFAARRMMII JJLL335511,, 2005, S/N 3190217, 3 POINT HITCH WINCH W/CABLE, STK#UA0969, HH............................................................................................$$33,,774455CCAASSEE--IIHH 6600”” SSIIDDEE DDIISSCCHHAARRGGEE MMIIDD MMOOUUNNTT MMOOWWEERR DDEECCKK FFOORRDDXX2211//2233//2266 TTRRAACCTTOORR,, STK# UA0976, HH............................................$$22,,229955

FFAARRMM HHAAYY && FFOORRAAGGEEGGEEHHLL 11554400,, S/N 24406, SILO BLOWER, STK# UG0210, HH .................$$22,,999900CCAASSEE--IIHH 88331122,, 1999, S/N CFH0111906, 12’ DISC MOWER CONDITIONER,STK# UA0975, HH ................................................................................$$1111,,449966

FFAARRMM TTIILLLLAAGGEEAAEERR--WWAAYY 1155’’,, S/N H02000110N, 15’ USED AERWAY W/NEW TIRES, STK#UF0138, HH ..........................................................................................$$1100,,550000AAEERR--WWAAYY 2200’’,, S/N DU75NAWZ0CQ8B, 20’ USED AERWAY, STK# UF0142, HH.............................................................................................................$$1155,,000000UUNNVVEERRFFEERRTTHH,, 1996, 12 SHANK ZONE BUILDER, STK# UF0129, HH .$$1188,,449955UUNNVVEERRFFEERRTTHH,, 2006, 6 SHANK ZONE BUILDER, STK# UF0137, HH ...$$1144,,999955DDMMII 22550000,, 6 SHANK FOLDABLE RIPPER W/TRANSPORT PACKAGE, STK#UF0135, HH ............................................................................................$$88,,779955

CCAASSEE CCXX221100 CCAASSEE 11884400TTAAKKEEUUCCHHII TTBB7700 CCAASSEE 555500 LLTTww ww ww.. ss cc hh aa nn ss ee nn .. cc oo mm

Palfinger NorthAmerica Sets Milestone

Palfinger North America has teamed up with NorthAmerica’s leading truck manufacturers to offer power andreach with high performance for extreme applications fea-turing the PK 85002, PK 100002 and PK 150002 knuckle-boom cranes.

Palfinger engineers design each truck and crane to with-stand the maximum torque and load to tackle the mostdemanding applications. This truck-crane product series willprovide a strong and versatile crane, according to the manu-facturer.

A number of these truck-crane packages are on display,including the PK 85002 crane, which features HPLS (High

Power Lifting System), Paltronic 50, Power Link Plus andDual Power System installed as standard.

Also on display is the PK 100002 crane. The PK 100002with fly-jib is equipped as standard with Paltronic 50, RadioRemote Control and Power Link Plus. It offers maneuver-ability and universal deployability.

The PK 150002 performance crane is equipped withHPLS, Paltronic 50, Power Link Plus and Dual PowerSystem.

Each of these units is equipped with load-sensinghydraulics for outstanding control and overall efficiency.Also featured on the PK 100002 and PK 150002 (andoffered as an option on the PK 85002) is the IntegratedStability Control system. The ISC system adjusts the crane’slifting capacity according to outrigger and stabilizer posi-tions at time of set-up.

An off-site demonstration area for the general public alsowill be set up at the RIO Suites-Hotel & Casino in Las VegasMarch 11 to 15, 2008. Product demonstrations will takeplace at this off-site location.

For more information, visit www.palfinger-northameri-ca.com or visit booth S-610.

Innovation and SolutionsCenter at IFPE 2008

Education is a cornerstone of the show experience atIFPE, the International Exposition for Power Transmission,and the 2008 event will feature a new Innovation andSolutions Center to complement the show’s prestigiousTechnical Conference.

The new IFPE Innovation and Solutions Center will offer19 free education sessions conducted on the show floor(South Hall Level 2) and with a focus on real-world solu-tions for current and future design applications. Topics aregrouped into four major areas: “green” solutions, innovativeapplications in the entertainment industry, fluid power solu-tions and motion control solutions now and in the future.

The “green” solutions track will offer attendees insightsinto renewable energy, hydraulic hybrid vehicles and systemtechnologies, environmentally friendly fuels and the latestissues related to U.S. Tier IV engine emission regulations.

Entertainment industry applications will spotlight Cirquedu Soleil’s KA show. The show’s head of automation, JamesTomlinson, will share a behind-the-scenes look at the pro-duction’s elaborate hydraulics, pneumatics and electronicsset-up. A drawing for tickets to KA and backstage tour pass-es will be held after this session. Other sessions will coverindustry technologies used in theme parks and movies.

Topics on fluid power solutions will cover mobilehydraulics, hydraulic fluids, hydraulic braking and steering,hose routing, seal designs, contamination control and thefuture of fluid power. Presentations on motion-control solu-tions will highlight electrohydraulics and motion control formobile equipment hydraulics.

Several segments will unveil new research taking place atthe Center for Compact and Efficient Fluid Power. This newengineering research center is funded in part by the NationalScience Foundation and is the result of efforts led by indus-try leaders and IFPE co-owner National Fluid PowerAssociation (NFPA).

For more information, call 800/867-6060 or visitwww.ifpe.com.


Palfinger’s PK 85002, PK 100002 and PK 150002cranes are on display.




Terex Cranes to ToutNew Crane Models

Terex Cranes presents product premieres and customerfocused developments including telescopic cranes, crawlercranes, tower cranes and rough-terrain cranes. Four mobilecranes and one tower crane will be shown.

The Demag AC 100/4 currently is the strongest 110-ton(100 t) four-axle crane (at maximum counterweight). Themaximum load moment of this mobile crane is 339 tons (308t), its system length is 252.6 ft. (77 m), with a 164-ft. (50 m)telescopic boom plus 88.6 ft. (27 m) of main boom exten-sion.

With a dolly, the crane is road legal in almost all of theUnited States as the distance between axles 2 and 3 is 8 ft.(24 m). Road legality also is possible with 16-in. (40.6 cm)tires.

The compact steel design is of significant advantage —110 tons (100 t) are distributed on 4 axles. The AC 100/4 hasone of the most variable main boom extensions (HAV) in itsclass. The 63-ft. (19 m) HAV can be offset at the basic boomas well as at the 26 ft. (8 m) extension.

The ability to also offset the extension is currently unique.Thus it is possible to either achieve large radii or to lift loadsover projecting edges. Four different stabilizer bases come asstandard and make for a high degree of flexibility in chal-lenging operating environments.

The carrier engine is a liquid-cooled DaimlerChryslerunit, delivering a powerful 445 hp (335 kW) at 2,000 RPM.The separate superstructure engine with an output of 175 hp(129 kW) provides a balance of power for rapid workingcycles and low fuel consumption.

Crawler CranesThe new HC 230 is in the medium lifting capacity range.

This new crawler crane offers 254 tons (230 t) of liftingcapacity at a reach of 14 ft. (4.3 m), when equipped with a77 SI boom Hammerhead tip. At 16-ft. (4.8 m) reach with a92 HI boom, offset tip the capacity is 254 tons as well. Themaximum length of the main boom is 290 ft. — an impres-sive 390 ft. with a boom extension.

The crane is equipped with a load-sensing hydraulic sys-tem to ensure smooth and precise work. This is an advantagewhen operating at maximum boom length or at maximum

lifting capacity. Driven by a 6-cylinder Cummins enginewith 325 hp (242 kW) 2,000 RPM, the HC 230 navigatesheavy terrain and climbs slopes of up to 30 percent (17degrees). The operator can adjust traction force and speed tomatch given operating requirements. Traveling speeds ofeither 0.55 or 0.37 mph (0.88 or 0.6 kmh) may be selected.

Afully hydraulic counterweight-system enables quick set-up times. Only nine trucks (standard lowboy trailers) arerequired to transport the crane with a 260 ft. (79 m) mainboom and 128,400 lbs. (58,241 kg) standard-counterweight(38,800 lb. [17,600 kg] base plus 8 x 11,200 lb. [5,080 kg]overlays) to and from working sites.

Rough-Terrain CranesThe RT 1120 is currently one of the most powerful rough-

terrain cranes on the U.S. market. A5-section, 3-mode boomforms the basis for the boom system. The basic hook heightis 155 ft. (47 m).

As an option, a 30 to 56 ft. (9 to 17 m) bi-fold jib is avail-able, as well as two additional 26 ft. (8 m) jib inserts, allow-ing for a hook height of 271 ft. (82.6 m).

The crane is powered by a strong 300 hp (223.6 kW)Cummins engine.

For ease of crane operation, the counterweight may be set-up fully hydraulically. In addition, the RT 1120 comes withelectric over hydraulic dual axis joystick controls and discbrakes on all four wheels.

Boom Truck CranesThe stinger-class BT 4792 with its lifting capacity of

47,000 lbs. (21,319 kg) and total weight of 60,000 lbs.(27,215 kg) is an extremely versatile machine. In addition tostandard crane applications it is very simple to mount aworking cage for one or two persons and a working plat-form. This vastly expands the crane operator’s missionoptions.

The maximum height of the main boom head is 101 or144 ft. (30.7 or 43.9 m) with main boom extension. Easy andsafe crane operation is enhanced through the BT 4792’scolor-coded boom and load charts. This allows the operatorto easily determine boom extension, boom angle and loadcapacity.

Equipment also includes: electronic load moment indica-tor and anti-two-block device are standard, as well as aredual control stations with a direct mechanically controlledhydraulic system. The 2-speed planetary winch has a 10,500lb. (4,763 kg) maximum permissible 1 part line, 37,000 lb.(16,783 kg) breaking strength, and 186 ft. (56.7 m) perminute maximum line speed: Its maximum road travel speedis 74 mph (119 kmh).

Tower CranesTerex Comedil has just launched a new range of Flat Top

tower cranes, the medium CTT series. This series, placedbetween the City and the big series, was created with the pro-duction of the CTT 231 and will shortly be expanded by theintroduction of new models.

The CTT 231 has a wide range of mechanical and jib con-figuration options allowing assembly with a maximum jiblength of 230 ft. (70 m) — minimum 98 ft. (30 m) — as wellas the possibility to use 16.4 ft. (5 m) jib sections.

The CTT 231 is a versatile machine, suitable for workingon both small and large buildings. It reaches considerablefreestanding heights — steel cables and winch speeds are aperfect solution to meet today’s construction needs. Capacityat the jib point is 2.3 tons (2.1 t) — maximum capacity is 11

to 13 tons (10 to 12 t). In addition, the CTT 231 has a com-petitive loading chart that decreases significantly less steeplywhen compared to cranes with similar features. The designof the crane is particularly aimed at the safety of each craneelement.

For more information, visit www.terex.com.

Powerscreen, TerexPegson Displays 1000SR

Mobile Cone CrusherWith Automax Design

Powerscreen and Terex Pegson will display the 1000SRmobile cone crusher with exclusive Automax all-in-feeddesign at booth G-200.

The SR1000 features a 5- by 11-ft. (1.5 by 3.3 m) two-deck sizing screen, input conveyor/hopper, product convey-ors and oversize return conveyor on a single chassis.

The unit can simultaneously produce two products plusoversize recirculation, or three products using an optionalthird stockpiling conveyor. The plant is engineered for highspecification, flexibility, and up to 240 tph (218 t) with highmobility and low operating costs, according to the manufac-turer.

Normally no pre-screening is required. Dust suppressionsprays, a Miltronics level probe sensor to achieve chokefeeding and metal detector are standard.

The Automax design can effectively utilize greater enginepower and low friction loss. The “all-in-feed” process isdesigned to maximize throughput and production, optimizeshape and minimize wear in secondary, tertiary and quater-nary applications, according to the manufacturer.

To maximize service life and product flow, minimize fric-tion loss, eliminate “bowl bounce” and simplify mainte-nance, Automax crushers do not use plain bearings, bronzebushings or bronze bearing seats; there are no accumulatorsfor tramp metal release and no spider bearing above the conehead.

On-board conveyors include feed, product, fines, topdeck, side transfer, recirculating and optional bottom sidetransfer to optional stockpiler. The plant can be moved onlevel ground with all conveyors in operating position.

For more information, call 502/736-5200, visitwww.powerscreen.com or visit booth G-200.


Compact and powerful, the AC 100/4 is entering theU.S. market.

The SR1000 features a 5- by 11-ft. (1.5 by 3.3 m) two-deck sizing screen, input conveyor/hopper, productconveyors and oversize return conveyor on a singlechassis.




Powerscreen Displays Chieftain 1700,Horizon 5163

Two of the Powerscreen products displayed in Terex booth G-200 include the newChieftain 1700 dry screen and the new Horizon 5163 scalping and screening plant. Both unitsset up ready to run in 30 minutes or less.

The new, highly mobile Powerscreen Horizon 5163 precision scalping and screening plantis designed to handle materials up to 10 in. (25 cm) and can produce up to 600 tons (544 t)per hour of high specification products (can be used for concrete and road building/paving)with materials such as natural and crushed aggregates, crushed and recycled concrete andasphalt, coal and iron ore.

The plant also works in closed-circuit primary, secondary and tertiary crushing setups toachieve high tonnages of fine-sized product meeting strict specifications, according to themanufacturer.

The new, highly mobile, two- and three-deck Powerscreen Chieftain 1700 can separate upto six products and is specifically designed to fit into the mid range bracket between theChieftain 1400 and 2100 models.

The 1700’s adjustable high amplitude two-bearing screen action exposes material to vary-ing amplitudes and G forces to help separate the material into the various required specifica-tions. The hydraulic screen angle adjustment varies thematerial travel rate over the screen deck to provide a cleanproduct in difficult applications. Four integral hydraulical-ly folding stockpile conveyors transport with the machine,eliminating the need for any lifting devices to put the plantinto working mode.

For more information, call 502/736-5200, visitwww.terexcs.com or visit Booth G-200.


The Powerscreen H5163scalping and screening

plant can produce up to600 tons (544 t) per hour

of high specification prod-ucts.




2006 Case 621D Cab, Htr, A/C,3yd Bckt w/BOE, RC #9726C1

SALE PRICED at $97,500

2007 Fecon FTX90 w/BH74SS Cab, Heat, A/C, Winch,#7033S

SALE PRICED at $89,500

1999 Case 590SL-2 4WD, CabHeat, Ext-a-hoe, Rear Aux Hyd

RC, #6729V1 $33,500

2002 Case 1850K 1128 hrs CabHeat, A/C, 159” 6-way blade, Rear Hyd #4307S $135,000

2006 Case 450CTL 674 Hrs, CabHeat, A/C, RC,18” tracks

# 6973S1 $38,900

•02 Case 70XT 1133 hrs Cab, Htr,A/C,Hyd Cplr #6742S1 $19,500

•05 Case 450 448 Hrs Cab,Htr,A/CHyd Cplr,HF #7156V1 $27,500

•02 Cat 277 Cab, Heat, 80” BucketPerkins engine #7071S1 $19,500

•04 Loftness 75AXH Timber Axe75” cut, Hi-flow #4352S $12,500

•95 Vermeer V4150 1522 hrs8”X6’ Trencher w/24” Plow4 way Blade #6612S2 $8000

•05 Zanetis CP40 Asphalt Mill40”X6” cut #7156V2 $15,000

•06 Case 650K-2 182 hrs OROPSSweeps, 98” 6-way Blade,16” CELT#7179S1 $62,500

•01 Case 850H 5165 hrs OROPSSweeps, 3 spool, 18” ELT track104” 6-way Blade #0812S1 $49,500

•91 Case 1550 8400 hrs Cab, HtrSweeps, 24” pads, Long Track120” Tilt Blade#8718C1 $32,000

•05 Case 621D 522 hrs EROPSHeat, Joystick Hyd, CW pkg,880# Cwt, 2.5yd Bckt w/BOELimited Slip Axles #9816C1 $95,000

•01 Case 821C 3458 hrs EROPSHtr, A/C, 109” 3.5yd bckt w/BOEACS Coupler #7008S1 $115,000

•04 Case CX160 2891 hrs, CabHtr,A/C,28”pads,42”Bckt, 10’2”Arm, CF Q/A, Pattern Selector#4355S $73,800

•04 Case CX50B 440 hrs, Cab,Heat, Blade, Hyd Thumb, 16”RT24”bckt, Manual Q/A#4341S $43,650

SALES SERVICE PARTS RENTALSVisit us on the web:www.stjosephequipment.com

For more information, Contact: Richard Rybak1-800-795-9274

Located in Minnesota & Western Wisconsin

IFPE 2008 TechnicalConference to Feature

Record Number ofPresentations

The IFPE 2008 Technical Conference will feature a record111 presentations on the latest research and developments inpower transmission and motion control technologies, withsessions geared to the global needs of engineers and otherdecision makers involved in design and manufacturingprocesses.

The IFPE 2008 Technical Conference will be held in con-junction with IFPE, the International Exposition for PowerTransmission. The IFPE show will feature 400 exhibitors and127,000 net sq. ft. of exhibit space.

The 2008 IFPE Technical Conference also will include anew electronic controls symposium in addition to its technol-ogy and design program. And, for the first time, ContinuingEducation Units (CEUs) will be available for all technicalconference sessions, to provide extra value for attendees.

IFPE presentations at this 51st edition of the conferencewill be published and made available at the conference, onCD-ROM available for pickup on-site only. The conferencefee includes admission to all sessions, available CEU creditsand the official proceedings.

IFPE conference presenters are industry experts in compa-nies and universities from around the globe. All papers have

been reviewed by the National Conference on Fluid Power,comprised of industry leaders and academic experts, to assurea high-quality conference that meets current design engineer-ing needs.

New topic areas include asset management, computation-al fluid dynamics, hybrid systems, suspensions and vehiclesystems. Additional topics featuring new research include fil-tration/contamination, fluids, hydraulic systems, hydraulicvalves, mechanical, modeling/simulation, pneumatics,plumbing/piping/fittings, pumps/motors/hydrostatic trans-missions, seals/sealing and water hydraulics.

For more information, call 800/867-6060 or visitwww.ifpe.com.

Terex Pegson DisplaysXA750, XV350, XH250

CrushersTerex Pegson products to be displayed in Terex booth G-

200 include three new crushers: the large XA750 jaw, theXV350 vertical shaft impactor, and the XH250 horizontalimpactor. All are track mounted.

The XA750 is an entirely new jaw plant for large quarryand recycling applications, using a modular design for maxi-mum capacity. Some of its features include a modular hop-per/feeder section with live pre-screen that is removable fortransport if required, a one-piece hydraulically raised/loweredproduct conveyor, an extended dirt/fines conveyor and aJaques 55- by 35-in. (140 by 89 cm) jaw with hydraulicadjustment system.

The new XH250 features a Terex Pegson designed hori-zontal shaft impactor using the latest technology for smallerrecycling and quarry applications. Features include an under-pan feeder for main-belt protection, a hydraulicallyraised/lowered main conveyor, full tunnel protection over theconveyor, direct drive through HFO clutch with soft start, anda two-stage grizzly feeder with underscreen.

The new XV350 features the Canica 2050 vertical shaftimpactor on a revised 1300 Maxtrak chassis. Ideally suited tobe fed from the Maxtrak range of cones, the countershaftdrive accommodates a conventional V-belt drive and HFOclutch for maximum fuel efficiency. Rotor speed ranges from830 to 1,750 rpm.

For more information, call 502/736-5200 or visitwww.terexcs.com.


The Terex Pegson XA750 jaw crusher plant includes amodular hopper/feeder section.




2008 ON-SITE AUCTION SCHEDULE1122 MMii EE ooff SStt CClloouudd && 1111 MMii NN ooff BBeecckkeerr aatt JJcctt MMNN HHwwyyss 9955 && 2255Friday, March 14th Heavy Construction

AAcccceeppttiinngg CCoonnssiiggnnmmeennttss uunnttiill NNoooonn oonn SSaattuurrddaayy,, MMaarrcchh 88tthh

Friday, April 25th Semis, Trucks & TrailersFriday, June 6th Heavy Construction Friday, August 1st Semis, Trucks & TrailersFriday, September 19th Heavy Construction Friday, December 5th Heavy Construction

AAllll AAuuccttiioonnss BBeeggiinn aatt 88aamm

YYoouurr MMiiddwweesstt EEqquuiippmmeenntt AAuuccttiioonneeeerrss && AApppprraaiisseerrss

See It - Bid On It - Buy It: iraymn.com

We Attract a Global MarketYou Get TOP Dollar!

Consign at our AuctionOr Call to Schedule Yours

(877) or (320) 968-7230

Visit Montreal-based Major WireIndustries booth 5781 in the Central Hall tosee its newest innovation — Flex-Thane —a flat-deck, Flex-Mat screen solution thatalso increases production. Flex-Thane com-bines the efficiency and performance ofMajor Wire’s Flex-Mat technology with theeasy replacement of polyurethane and rub-ber panels to virtually eliminate blinding andpegging problems on flat-surfacescreen decks, according to themanufacturer.

Its independently vibratingwires, bonded in place withlime-green polyurethanestrips, also provide more openarea for increased throughput,higher production and betterefficiency than polyurethane andrubber screens in hard-to-screen applica-tions.

Flex-Thane’s modular panels install easi-ly on most common flat-surface screendecks, similar to traditional polyurethaneand rubber panels.

The product is available in 1- by 1-ft. and1- by 4-ft. (0.3 by 0.3 m and 0.3 by 1.2 m)panel sizes with a variety of locking systemsto fit virtually any flat-surface polyurethaneor rubber screen deck. It can be custom-made in 1- by 2-ft. and 1- by 3-ft. (0.3 by 0.6m and 0.3 by 0.9 m) sizes, as well.

Another featured product in Major Wire’s

booth will be its Flex-Mat 3 high perform-ance, self-cleaning screen media, which hasincreased screening efficiency in more than15,000 applications worldwide. Available ina broad range of opening sizes — 30 mesh to4 in. (10 cm) — and with a wide range ofapplication-specific wire diameters, Flex-Mat 3 enables Major Wire to fine tune each

screen’s production to its greatest poten-tial, according to the manufacturer.

Wire configurations include adiamond-shaped Flex-Mat “D”

for most standard applica-tions; wave-patterned Flex-Mat “S” for removal offines; and triangular Flex-

Mat “T” for heavy scalping orfine screening applications. Flex-Mat 3

Double Wire handles the heaviest scalpingapplications.

Major Wire Industries Limited offers awide range of woven wire, Flex-Mat andpolyurethane screen media that meets thespecific needs of customers. Founded in1884, Major Wire designs, manufactures andmarkets Flex-Mat 3 high-performance, self-cleaning screen media; Optimum Wirewoven tempered and stainless steel wirecloth and polyurethane panels for the quarry,mining, recycling and industrial markets.

For more information, call 450/659-7681,visit www.majorwire.cc or visit booth 5781in Central Hall.


Superior Industries willshow its truck unloader atbooth S-670. The low pro-file RazerTail truckunloader discharges mate-rial from trucks to convey-ors or other trucks in min-utes, reducing contamina-tion from traditional trans-fer methods.

Featuring a 12-ft.-wide(3.6 m) transport position,the unit promises portabil-ity and easy, user-friendlysetup. A RazerTail truckunloader has the ability totransfer up to 25 tons (22.6t) of 100 PCF material, delivering up to1,500 tph (1,361 t) from belly or end dumptrucks in less than two minutes.

Hinged, self-cleaning ramps hydraulicallyrise to a vertical position. The dischargeheight also is hydraulically adjustable. Anelectrical control panel with main breakers

and starters features push-button operationof the hoppers, control pump and drivemotors.

For more information, call 800/321-1558,visit www.superior-ind.com or visit booth S-670.

Superior Industries Displays Low-ProfileRazerTail Truck Unloader

Major Wire Unveils Flat-Deck Flex-Mat Solution


A RazerTail truck unloader has the ability to transfer upto 25 tons (22.6 t) of 100 PCF material, delivering up to1,500 tph (1,361 t) from belly or end dump trucks in lessthan two minutes.


TOLL FREE: 800-342-7575OLL FREE: 800-342-7575Syracuse Offi ce Phone:

Call Today For Crane Parts - All Makes and Models

315-458-4101 • Fax: 315-458-3169

www.emempirececrane.cne.com


NOW WITH 3 LOCATIONS TO BETTER SERVE YOUNOW WITH 3 LOCATIONS TO BETTER SERVE YOU

PEINER

BOSTONRHODE ISLAND - MAINE

20 Industrial Rd.Wrentham,

Massachussetts

UPSTATE NEW YORK

7021 Performance DriveNorth Syracuse,

New York

NYC - NJ - PA130 Allen Street

Netcong, New Jersey

NORTHEAST’S LARGEST CRANE DEALER


Miller Breaks NewGround in the North

American Market

Miller, the UK-based manufacturer of excavator couplersand buckets, is set to expand entry into the North Americanmarket with a range of compact quick couplers and taskbuckets. Additional new products also will be released atConExpo-Con/AGG 2008.

In its 30-year history Miller has fostered relationships withthe world’s leading original equipment manufacturers,including a proven track record as a supplier of pin grabberquick couplers to the North American market since 1999,according to the company.

This new expansion, launched at ConExpo-Con/AGG2008, will introduce Miller’s compact quick coupler range inthree versions:

• Mechanical• Hydraulic (semi-automatic with mechanical back up

safety pin)• Universal fully hydraulic (operation completely from

inside the cab) Each compact quick coupler is designed to provide fast,

on-site attachment changeover. Hydraulic operation from thecab increases time savings, productivity and operator safety.The entire range features a cast shape that is strong, yet com-pact to minimize weight.

Other features include quick/easy installation and the flex-ibility to operate buckets in standard and face mode posi-tions.

The compact quick coupler range features a universallycompatible design that allows for quick operation with agreater range of attachments, making each version ideal formixed fleet owners and operators. The quick coupler range

is designed to work with standard OEM direct mount buck-ets, as well as the new compact task bucket range.

The quick coupler was created by the family-ownedMiller company in 1989 in response to an industry need fora safer, more time efficient way to change excavator bucketsand attachments without leaving the cab.

“This North American launch is the next step in pacing theevolution of the quick coupler we first created nearly 20years ago,” said Miller Sales & Marketing Director JacquiMiller.

“Customers all around the world have growing and ever-changing needs. It is Miller’s mission to help them completetheir work in the timeliest, safest and most profitable man-ner.”

Complementing the compact coupler range is Miller’snew compact task bucket range:

• Digging & Loading Scoop• Trenching Scoop• Ditch Cleaning Bucket• Vertical Wall Bucket The specially-designed buckets provide operators with a

range of on-site solutions tailored to specific job site appli-cations. Each bucket is an ideal fit for tight or confined areas.

“Two of the four task buckets are based on Miller’s Scoopbucket design,” stated Miller. “The Scoop is a world-renowned bucket that has proven its place in the large exca-vator market. The Miller compact task bucket range takesthis innovation to a smaller scale, but comes up big for oper-ator productivity.”

Miller is headquartered in the U.K., where it was foundedin 1978. The company has expanded operations with facili-ties in Europe, China and Japan.

The company’s North American presence is centered inSavannah, Ga., where Miller Ground Breaking Inc. operatesoffices and warehouse facilities. From Savannah, Miller isable to distribute product and provide support throughoutNorth America quickly and efficiently.

“Miller buckets, couplers and attachments are trustedaround the globe,” added James Coleman of Miller GroundBreaking Inc. in Savannah. “Now the North American mar-ket is going to get a greater chance to see what Miller quali-ty, safety, service — and above all productivity — is allabout.”

New products also will be released during ConExpo. For more information, visit

www.millergroundbreaking.com or visit Gold Lot G251.

Stack Bigger, Better PilesFast With TeleStacker

Superior Industries will show its 42- by 170-in. (107 by432 cm) TeleStacker conveyor at booth S-670. It creates aneven blend of material throughout the pile, increasing quali-ty and preventing fines, which increase expenses.

Offering customizable automation packages, theTeleStacker conveyor allows the creation of fully or partial-ly desegregated stockpiles, all while meeting demanding

specs and reducing labor and maintenance costs, accordingto the manufacturer.

Stockpiles are built in layers of windrows using an auto-mated system that controls the movements of the stinger,incline and radial travel to complete a desegregated pileaccording to the limits and increments set by the operator.

Set to build a maximum capacity pile, the TeleStackerconveyor has a maximum stockpile capacity of approxi-mately 310,000 tons (281,227 t).

For more information, call 800/321-1558, visitwww.superior-ind.com or visit booth S-670.

Students Advance toFinale of ‘ConstructionChallenge’CompetitionRegional rally winners have been selected in the first-ever

Construction Challenge competition, initiated by theAssociation of Equipment Manufacturers (AEM).Approximately 51 student teams have earned the chance tocompete in the Construction Challenge finale.

AEM designed the challenge to expose students to newskills and future industry job opportunities, and to highlightinfrastructure needs and industry contributions to quality oflife. The association partnered with Destination ImagiNationInc. to produce a hands-on educational experience thatengages the interest of teens through creative and problemsolving activities.

Five regional rallies were held across the United States onJan. 12. More than 150 teams comprised of more than 700high school students participated. They came from 18 statesto compete in one of the five rallies, held in Georgia, NewJersey, Ohio, Texas and Wisconsin.

The winning teams will compete for scholarships andprizes, get the chance to learn new skills and network withconstruction industry leaders.

“We were looking for a new way to reach young people,parents, teachers and counselors with the variety of careeropportunities the construction industry has to offer. TheConstruction Challenge is a great way to share that informa-tion and to educate the public about the growing demand forskilled workers,” said Al Cervero, AEM senior vice presi-dent.

“We estimate that the construction industry will createmore than 1 million new jobs by 2012, and we offer somegreat career choices for young people in school today. At thesame time, that many of our employees are entering intoretirement, our national infrastructure is in need of a dramat-ic face-lift that will require the creativity and hard work ofsome of our nation’s best and brightest,” he added.

“As we see frequently in the news, our country is facingan infrastructure problem. We have crumbling bridges, over-crowded roadways and aging water and wastewater systems.If we don’t address these issues adequately now, we willseverely compromise safety and productivity. We cannotwait much longer,” Cervero added.

In the challenge, teams went head-to-head with otherteams in three events. A debate-style format focused on aserious discussion about infrastructure issues related toroads, bridges, and clean water. In a “road warrior” segment,teams designed, selected construction materials, built andtested a small-scale structure in a very short period of time.In the third segment, teams developed industry communica-tions materials and programs.

For more information, visitwww.ConstructionChallenge.org.

Miller’s task bucket range (L-R) includes the ditchcleaning bucket, vertical wall bucket, trenching scoopand the digging and loading scoop. Pictured in front isthe Miller mechanical coupler.

Miller’s buckets are hard at work. (Clockwise L-R) arethe digging and loading scoop, trenching scoop, ditchcleaning bucket and vertical wall bucket. Pictured inthe center is the Miller mechanical coupler.

The TeleStacker conveyor allows the creation of fullyor partially desegregated stockpiles.





CONEXPO - CON/AGG‘08Find us at Gold Lot

Booth G-334

CONEXPO - CON/AGG‘08

2655 S. Le Jeune Rd. Suite 808CORAL GABLES, FL 33134

Toll Free: 1-800-820-AUSAwww.ausa.com

DUMPERS2,200 lbs - 22,000 lbs

ROUGH TERRAINFORKLIFTS

3,000 lbs - 8,800 lbs

TASK M 501,100 lbs bed capacity

1,650 lbs towing capacity

Telsmith Vibro-King TLScreen Debuts

Telsmith Inc., an Astec company, introduces its new lineof inclined vibrating screens, the Vibro-King TL series in theAstec/Telsmith Booth No. 5135 in Central Hall.

Replacing the existing Vibro-King and Specmaker screenlines, the new Vibro-King TL screen boasts longer servicelife, reduced maintenance and lower operating costs, accord-ing to the manufacturer.

At the heart of the Vibro-King TL is the new TL shaftassembly featuring a “Never-Wear” seal design that elimi-nates contact seals, reducing maintenance and providinglonger service life. For greater bearing life, all TL shaftassemblies utilize wide-series bearings and polished shaftbearing journals. Minimal maintenance is ensured via itslarge-diameter shaft casing that boosts oil volume to allowlower operating temperatures and fewer oil changes.

For optimum efficiency, multiple flat and crowned deckdesigns are available allowing the Vibro-King TL to workwith all screen media types. Also, deck spacing between thetop and middle decks has been increased to simplify screenmedia changes.

Available in both single and dual-shaft models and in sizesranging from 5- by 14-ft. (1.5 by 4.3 m) up to 8- by 24-ft.(2.4 by 7.3 m), the new Vibro-King TL line is available inboth standard and heavy-duty models, with all HD modelsfeaturing 0.5-in.-thick (1.3 cm) side plates.

Spring mounts incorporate a “jacking bracket” providingsafe, speedy access for spring maintenance.

For more information, call 800/765-6601, visit www.tel-smith.com or visit the Astec/Telsmith Booth No. 5135 inCentral Hall.

ConExpo Features SafetyZone Exhibit Area,

Workforce InitiativesNew additions to the ConExpo-Con/AGG 2008 exhibi-

tion focus on industry safety training and the need for a qual-ified industry workforce.

A special Safety Zone exhibit area features live demon-strations and information resources focused on job site safe-ty.

In the show’s Safety Zone area, exhibiting groups includeU.S. federal government organizations such as the MineSafety and Health Administration (MSHA) and NationalInstitute for Occupational Safety and Health (NIOSH).

The International Powered Access Federation (IPAF) alsois on hand with its Click It campaign, which demonstratesproper techniques for wearing full-body harnesses in boomtype aerial work platforms.

The “zone” is open during the run of the show, locatedwest of the outdoors Blue Lot.

Show sponsor National Ready Mixed ConcreteAssociation (NRMCA) is holding its first ever Mixer Driver

World Cup competition at ConExpo-Con/AGG 2008,designed to recognize the exceptional talent and skills ofready mixed concrete mixer drivers from around the world.

NRMCA’s driver championship is an extension of theassociation’s Ready Mixed Truck Driver of the Year award,which recognizes driver career achievements, safety, profes-sionalism, competence and customer service.

The Mixer Driver World Cup competition at the showinvolves driving a challenge course, performing a walk-around visual inspection and completing a written examina-tion. Awards will be presented for winner, second place andthird place finishers.

The event takes place March 12, with the driving chal-lenge and inspection in the outdoor Orange Lot.

Show sponsor Association of Equipment Manufacturers(AEM) is holding the finals of its first ever teen-orientedConstruction Challenge, with the goal of spurring interest inconstruction industry careers and spotlighting industry con-tributions to quality of life such as good roads and cleanwater.

AEM’s Construction Challenge is part of the association’sefforts to attract the best and brightest young people into theconstruction industry in professions ranging from manufac-turing to in-the-field careers. Approximately 50 teams areexpected to compete in three areas: awareness of construc-tion-related jobs, construction equipment and manufacturingand infrastructure awareness. Among the prizes are industry-related scholarships.

The competition takes place March 11 to 13, 2008, nearthe AEM booth indoors in the lobby area.

For more information, call 800/867-6060 or visitwww.conexpoconagg.com.



A.G.T. Equipment Co., Inc.Acme ElectricAeschliman EquipmentAISAlban Tractor Co., Inc.Alden TrucksAlex ParisAll Island Equipment CorpAmerican State Equipment Co., Inc.Argus IndustrialArnold MachineryArrow EquipmentASC Construction Eq.Asphalt Care Equipment & SuppliesAtlantic Tractor - PAAtlantic Trailer & Equipment Sales Inc.B&R EquipmentBeck Equipment IncBinder Machinery CompanyBobcat of North JerseyBrandeis MachineryBrandon FonsBriggs EquipmentBrookside Equipment SalesCapital Tractor, Inc.Carlson Tractor & EquipmentCarman Equipment SalesCarroll EquipmentCasey & Dupuis Equipment Corp.CB Con-AggCC & FF Keesler IncCCS Equipment Sales, LLCCDM Inc.Chadwick BaRossChampion EquipmentChampion Equipment CompanyChappell TractorCherry Hill Construction &Demolition Co.Cleveland Brothers EquipmentCLM Equipment CompanyCN Wood Co., IncConstruction Crane & TractorCowin Equipment Co IncCurry Supply CoD&M ContractingD. Storey Inc.D3 EquipmentDanella Used Truck & EquipmentDennis UsnerDom-ExDon Koontz EquipmentE.W. Sleeper E.W. SleeperCompany, Inc.Eagle Power & EquipmentEarthborne Trucks and EquipmentEast P B E Inc

Eaton ExcavatingEdward Ehrbar IncElderon Trucks & EquipmentEmecoEmerald EquipmentEquipment ConsolidatorsEquipment Mart of New YorkEquipment SolutionsEquipment Support ServicesErb EquipmentFABCO Equipment IncFalcon EquipmentFalcon PowerFarm-Rite Equipment, Inc.FinkbinerFolcomer EquipmentFoley IncorporatedG & H Service IncGarden State BobcatGeneral Equipment and SuppliesGeorge & SwedeGeorge AssociatesGeorge R. Brown Inc.Gibson Machinery LLCGiles & Ransome IncGolden EagleGorham Tractor & EquipmentCompany Inc.Groff Tractor & Equipment Co IncGrossman ChevroletH O Penn Machinery Co IncH&E Equipment ServicesHagemann ConstructionHale TrailerHancock Construction CoHarter Equipment IncHarts Tractor CoHayden EquipmentHendrix Machinery LLCHertz Equipment RentalHighway Equipment & Supply Co.Hillview Equipment & Leasing IncHillview RentalsHi-Way Equipment CompanyHoffman EquipmentHoober, Inc.Hoss Equipment CompanyHowell Tractor & EquipmentHydraulic Machinery, Inc.Illinois Truck and EquipmentIndustrial Tractor CompanyIron PlanetJ W Burress IncJ.J. ScheckelJesco IncJFW Equipment Inc.John Hammel

Joseph Equipment Company, LLCJoseph's Truck & Equipment SalesKarel ConstructionKeesler Truck & Tractor SalesKelly Tractor CoKeystone Processing & EquipmentKuhn Equipment Sales CoLaCorte EquipmentLanghorne Paving CompanyLano EquipmentLiebherr Equipment SourceLiftechLuby EquipmentLucky's TrailersLudwigs EquipmentM. Adams Equipment Machinery ServicesMarshall Machinery, IncMass-Conn EquipmentMathews MachineryMay Heavy EquipmentMcAllister Equipment Co

McCann IndustriesMcClung-Logan EquipmentMcDevitt Trucks, IncMedico Industries IncMessick'sMichael CannizzaroMichigan CatMidlantic Machinery CompanyMike Zyndorff LLCMilton CatNC MachineryNorris Sales Co IncNorthland ConstructionNuss GroupOpdyke IncPatten Tractor & Equipment CoPenn Jersey MachineryPhillip George ContractorsPine Bush Equipment Co IncPlasterer Equipment Co IncProline TrailersRDO Equipment Co

Rental Service CorpReynolds EquipmentRoad Machinery & Supplies Co.Roland Machinery CoRoyal Construction Inc.Rudd Equipment Co.S.A. McLeanSal ArcaroSC HansenSchmidt Equipment Inc.Senter Tractor Co.Silvi ConcreteSmith Equipment CompanySoutheastern Equipment Co.Stan Godshall ExcavatingStephenson Equipment IncStevenson Equipment Ltd.Stowers MachinerySumiquipSusan TenneyT E S IncThe Nice Company

T-Quip Sales & RentalsTracey Road Equipment IncTractor & Equipment CompanyTrax, Inc.Trenchers PlusTrico Equipment IncTyler EquipmentUnited Rentals, Northeast RegionValley Supply & EquipmentCompany, Inc.Vantage EquipmentVernon E Stup & Co.W.I. Clark Co.Wagner CATWest Side Tractor SalesWestchester TractorWhite Oak Equipment Inc.Wolverine Tractor & Equipment Co.Woods C R W CorpWorld TractorYancey Bros. Co.Ziegler Caterpillar

Page 94 • March 11-15, 2008 * www.cegltd.com • 2008 ConExpo Special • Construction Equipment Guide

ADVERTISER INDEX

TThhee AAddvveerrttiisseerrss IInnddeexx iiss pprriinntteedd aass aa ffrreeee eeddiittoorriiaall sseerrvviiccee ttoo oouurr aaddvveerrttiisseerrss aanndd rreeaaddeerrsshhiipp.. CCoonnssttrruuccttiioonn EEqquuiippmmeenntt GGuuiiddee iiss nnoott rreessppoonnssiibbllee ffoorr eerrrroorrss oorr oommiissssiioonnss..

ALBAN TRACTOR CO INC ......................................................5ALEX PARIS CONTRACTING CO INC ................................44ALL ISLAND EQUIPMENT ......................................................7ALLU GROUP ........................................................................66AMERICAN CONTRACTORS EQUIPMENT ..........................69ATTACHM ..............................................................................47AUSA CORPORATION ..........................................................92BECK EQUIPMENT ................................................................17BOYER FORD ........................................................................85BREAKER TECHNOLOGIES ................................................81BROCE BROOM ....................................................................22BROOKSIDE EQUIPMENT SALES INC ..............................96CAPITAL TRACTOR INC ......................................................72CASE ........................................................................................59CASHMAN EQUIPMENT ......................................................26CAT (CA GROUP) ....................................................................15CEG SUBSCRIPTION ..............................................................68CEG.COM ................................................................................93CHADWICK-BAROSS ............................................................13CHAPPELL TRACTOR SALES INC ......................................23CLEVELAND BROTHERS EQUIPMENT CO............................3CON-EQUIPMENT OF THE CAROLINAS ............................71CONSTRUCTION CRANE & TRACTOR ..............................57COSTEX ................................................................................83CREAN EQUIPMENT CO ......................................................17CURRY SUPPLY CO ..............................................................75DAVIS AUCTIONS INC ..........................................................72DOM-EX INC ............................................................................9DRESSTA NORTH AMERICA ................................................23DYNAPAC ..............................................................................95E TIP INC ................................................................................72E W SLEEPER COMPANY ....................................................33EAST PBE ................................................................................6EDWARD EHRBAR INC ..........................................................4ELLIOTT MACHINE WORKS INC ........................................77EMERALD EQUIPMENT SYSTEMS ....................................73EMPIRE CRANE CO ..............................................................89FABCO EQUIPMENT INC ........................................................8FELLING TRAILERS ..............................................................61GENSCO EQUIPMENT CO LTD ..........................................84GLOBAL DEVELOPMENT INTERNATIONAL ........................40HEAVYQUIP ..........................................................................48HOFFMAN EQUIPMENT CO ....................................................2HOLT MOTORS ......................................................................77HUNYADY AUCTION CO ......................................................11HYDREMA U S INC ................................................................32HYUNDAI CONSTRUCTION ................................................19ILLINOIS TRUCK......................................................................46INDY LIFT INC ........................................................................77

INTERNATIONAL CONSTRUCTION EQUIPMENT................53INTERSTATE TRAILERS INC ................................................21IRAY AUCTIONS ....................................................................88IROCK CRUSHERS ..............................................................47IRONWOLF ............................................................................37JESCO ....................................................................................16LANO OF ANOKA ..................................................................56LUBY EQUIPMENT SERVICES (MMECO) ............................63MANITEX ................................................................................12MAXIFORCE ..........................................................................79MCCLUNG LOGAN ................................................................78MDS ........................................................................................17MENTOR DYNAMICS LTD ......................................................7METSO MINERALS ................................................................27MIDCO DEMOLITION TOOL CO ..........................................29MIDWESCO INDUSTRIES INC ............................................91MIDWEST DIESEL ................................................................50MILTON CAT ..........................................................................36MOXY EQUIPMENT COMPANY ..........................................68NATIONAL ATTACHMENTS ..................................................28NEW MILLENIUM RENTALS ................................................39NIECE EQUIPMENT LP ........................................................35NITKE SALES INC ................................................................70ON-SITE RECYCLING CORP ..............................................67PEMBERTON INC ..................................................................55PINE BUSH EQUIPMENT CO ................................................6PIRTEK ..................................................................................87RAINBOW MANUFACTURING ................................................7RDO EQUIPMENT CO ............................................................38RENTAL SERVICE CORP ......................................................52ROAD MACHINERY ..............................................................20S C HANSEN ..........................................................................80SCHUFT FAB 2 ......................................................................47SILVI CONCRETE ..................................................................70SOUTH COAST BOBCAT ........................................................0ST JOSEPH EQUIPMENT ....................................................86TECH HYDRAULICS ..............................................................34THE LJ COMPANIES ............................................................60TRACEY ROAD EQUIPMENT INC ........................................13TRANSPORT EQUIPMENT SALES ......................................62TRI-STATE AGGREGATE ......................................................88TRUCK WORKS INC ............................................................65VALLEY ENGINEERING INC ................................................71WEST SIDE TRACTOR SALES ............................................25WESTCHESTER TRACTOR INC ..........................................45WOODS CRW CORP ............................................................14XTREME MFG ........................................................................31


WWW.DYNAPAC.COM

NEW!

Part of the Atlas Copco Group

YOUR PARTNER ON THE ROAD AHEAD

SOIL, CONCRETE & ASPHALT...ENDLESS POSSIBILITIES


1999 JCB 506C SHOOTING BOOM FORKLIFT,6000LB LIFT CAP. 34FT REACH........................................$23,500

2005 FORD F-650 6 WHEEL DUMP TRUCK, CUM-MINS POWER,ALLISON AUTO TRANS, 26000GVW$29,500

1998 JOHN DEERE 200LC EXCAVATOR, WIDESHOES, MECH THUMB, GOOD U/C............................$43,500

2004 MACK GRANITE TRI AXLE DUMP TRUCK,17 STEEL HEATED BODY, 106,000 MILES ...................$79,900

1999 CAT 315BL EXCAVATOR, WIDE PADS, GOODU/C, ONE OWNER, MECH THUMB.............................$47,500

1995 TIBROOK STEEL DUMP TRAILER, 28FT,GOOD COND....................................................................$14,500

2007 INGERSOLL RAND WL440-A WHEELLOADER, COUPLER,AUX. HYD. KUBOTA DIESEL$53,500

1997 YANMAR VIO40 MINI EXCAVATOR, RUBBERTRACKS, BLADE, SWING BOOM .................................$15,500

2001 ASV 4810 RUBBER TRACK SKIDSTEER,100HP, 2900 LIFT CAP. 1656HRS ....................................$16,500

2003 JOHN DEERE 200CLC EXCAVATOR, WIDESHOES,AUX. HYD. GOOD U/C A/C ..............................$69,500

2002 JCB JS130 EXCAVATOR, GOOD U/C, 30,000LBMACHINE, 4262HRS ..........................................................$27,500

KOLMAN MODEL 101SS SCREENING PLANT,SUPER SCREEN,W/GRIZZLY, CUMMINS POWER...$17,500

2005 INGERSOLL RAND ZX125 EXCAVATOR,STEEL TRACKS, BLADE,A/C, 3RD VALVE ......................$62,500

1979 TEREX 7231B WHEEL LOADER, 3YRD BUCK-ET, FORKS, GOOD COND .............................................$16,500

2003 JOHN DEERE 160LC EXCAVATOR, MAN.THUMB,WIDE SHOES,A/C................................................$47,500

2002 CASE 721C WHEEL LOADER, COUPLER,A/C,GOOD RUBBER..................................................................$56,500

MACK RD7959X 10 WHEEL DUMP, 14FT STEELBODY, 300 6SPD LOE HOLE, 55 REARS.........................$7,750

2003 CAT 430D 4X4 LOADER BACKHOE, X-HOE, GOODRUBBER .................................................................................$39,500

1988 JOHN DEERE 210C 2WD LOADER BACK-HOE, CAB HEAT, STD HOE, GOOD COND ..........$13,500

1987 JOHN DEERE 770B GRADER, 13FT BLADE,RUNS & OPERATES VERY GOOD...................................$37,500

1993 DRESSER TD15-C CRAWLER DOZER, GOODU/C LEVER STEER, SEMI-U BLADE................................$24,500

The Area’s Largest Selection ofUSED CONSTRUCTION

EQUIPMENT

888-763-4656978-249-4600

[email protected] State Rd. , Rt. 2A

Phillipston, MA 01331

100 + Piecesof Equipment

in StockBrooksideBrookside

EQ UIPMENT SALESCCOONNSSTTRRUUCCTTIIOONN EEQQUUIIPPMMEENNTT && TTRRUUCCKKSS

Call or check out our website: www.brooksideequipment.com

Documents

CEG ConExpo 2008