CATIA V5.19 broadens virtual design for real success

IBM United States Software Announcement208-218, dated September 23, 2008

IBM United States Software Announcement208-218

IBM is a registered trademark of International Business Machines Corporation 1

CATIA V5.19 broadens virtual design for real success

Table of contents

2 Key prerequisites 39 Education support 2 Planned availability dates 39 Withdrawn configurations 2 Description 40 Technical information 6 Product positioning 52 Ordering information 8 Reference information 56 Terms and conditions 8 Program number 59 Prices 15 Additional details

At a glance

CATIA V5.19 enhances 65 products to:

• Consolidate end-to-end industry process coverage for composite design to manufacturing,electrical design and flattening

• Accelerate long lasting productivity tools for the design of plastic parts and tooling designreview process

• Expand the power of 3D to terrain modeling disciplines that require large scale modelingcapabilities

• Improve the richness of 3DXML for better downstream utilization

• Become fully compatible with Windows® Vista

Overview

CATIA Product Lifecycle Management (PLM)

Designed for you, designed with you.

• CATIA V5.19 brings significant advantages to the aerospace and energy industries for turbinewing design in the composite end-to-end process. It adds two new approaches for compositedesign and manufacture: the grid and solid composite.

• V5.19 improves the end-to-end electrical process by using capture and reuse knowledgethroughout the electrical design. It allows for even more productivity in wire and harnessdesign and flattening.

• V5.19 adds a label painting support process that allows for the precise placement and drawinggeneration of labels, a method that is particularly useful for plastic parts.

Design performance for innovation

Just be the imagineer.

• CATIA V5.19 delivers large scale modeling of meshed surfaces and volume capabilities forthe terrain modeling discipline used in the energy and construction industries.

• V5.19 unleashes industrial designer creativity with the Imagine and Shape product whichallows fast surface creation from curves or network of curves and allows the user to createtheir own primitives to start their design.

Breakthrough technologies

Your innovation starts with ours.

• CATIA V5.19 brings superior productivity in the design of plastic and molded parts using thebreakthrough auto-fillet capability.



• V5.19 accelerates the part and tooling design review process for manufacturability, especiallyfor casting and injection molding processes. The new wall thickness analysis feature ensuresthat the thickness meets the requirements of the manufacturing process in order to anticipateand fix potential manufacturing issues.

• V5.19 takes real time rendering one step further to allow users to experience the product asif it was real, to provide real time material configuration testing, and to leverage the perceivedquality of the final product.

Collaborative PLM

Networking minds to speed up innovation.

CATIA V5.19 enriches 3D XML and enables a wider scope of downstream applications.Functional Tolerancing & Annotation (FT&A) features from any V5 document are available forexport, including shading that brings more realism to 3D XML rendering.

Easy, open and scalable

Adaptable to you.

• CATIA V5.19 improves long term archiving for the aerospace industry by aligning with thelatest PROStep/PDES.inc recommended practices for the control of STEP transfers.

• V5.19 provides the user with large scale management capabilities to enable large scalemodeling of industrial projects such as dams in the construction industry.

• V5.19 is fully compatible with Microsoft® Windows Vista.

Key prerequisites

CATIA V5 runs on selected versions of:

• Microsoft Windows

• AIX

• Hewlett Packard HP-UX

• Sun Solaris

Planned availability dates

• October 3, 2008, CATIA V5.19

• October 24, 2008, CATIA Web-based Learning Solutions® V5.19

Description

Provides two new approaches for the end to end composite process: The grid compositeand the solid composite

These new approaches offer better optimization in the composite design steps and better matingwith structural parts in turbine wing design for the aerospace and energy industries.

Improves the end-to-end electrical process with more knowledge capture and reuse forelectrical design

The user may define knowledge user parameters on internal harness coverings and copydata from a catalog definition to a harness design. A knowledgeware check allows the user tovalidate the 3D harness segment diameters versus the harness segment diameters computedfrom wires. The user may also synchronize equipment reference designator attributes betweenelectrical and tubing definitions using knowledge.



Provides more productivity in wire and harness design & flattening

V5.19 provides more efficient harness flattening with the ability to maintain bundle tangency froma 3D harness design. It allows the use of XML electrical files in a local repository when usingENOVIA VPM V5. Arranging segments in a support is improved to ensure wire routing and toincrease accuracy of complex connector assemblies (shell and connector).

Improves V4 to V5 electrical harness data migration

V4 to V5 migration brings numerous benefits in this release, such as the migration of V4protection as V5 light protection. The user is able to use the enhanced V5 internal protection ifhe or she migrates electrical data containing protections from V4 to V5. This enhanced migrationoffers improved consistency of V4 and V5 bundle segment shape and length.

Brings a new EndCut command for structure design

The user may:

• Create, edit, and delete end cuts, and the end cut for a beam is integrated in the piece partengine

• Translate a Structure Functional Design 2 (SFD) or Ship Structure Detail Design 2 (SDD)feature during the explode mode through piece part process

• Define end cut graphic replacement in drafting

• Manage different graphic replacements for beam pillars

Enhances technological results usage in tooling design

The mold to cam function is enhanced to permit the creation of a technological results report.Reporting of die/mold technological results is accessible via the new command DisplayTechnological Results (available with Prismatic Machining Preparation Assistant 2 (MPA)license). Any user of the Tooling Design 1 product who has an MPA license can benefit from thisenhanced reporting command:

• Create a report (*.csv) on the technological results existing in a given die

• Define some in house processes between the design and the manufacturing stage thatprovide the user with a powerful tool to control the integrity of the die design and preventscostly iterations between design and manufacturing

Increases design productivity in sheet metal design

The powerful extrusion explode improvement offers an explode mode, which allows the userto generate an associative wall on edge. Creating an extrusion becomes an accelerator ofthe design and exploding the extrusion allows user to locally modify design while maintainingassociations.

Ensures new improvements in the machining simulation domain:

• Capability to support milling machines with interchangeable heads. This enhancement allowsthe user to simulate milling machines with interchangeable heads, thus enabling the user toverify numerical control (NC) tool paths for travel limits and collisions and modify if necessary.

• Machine configuration management within an operation. The new options in the existing toolpath modify dialog and the tool path trace allow the user to:

– Force the selection of a particular machine configuration during machine simulation

– Associate and persist a machine configuration along with a particular tool path point fromwithin the tool path modify dialog

– Apply this machine configuration during machine simulation when the particular tool pathpoint is to be reached



Ensures the design of complex machine parts with easy-to-use multi-axis machiningoperations

V5.19 provides a new multi pocket flank contouring operation, which supports multiple toolaxes for point-to-point operation. The tool axis may be driven by an auxiliary surface (sweeping,contour driven, iso-parametric, and curve following) through the 5x operation.

Reduces programming machining time

To get accurate information, the user can display the in-process stock on each milling or turningoperation. The tool path replay includes the capability to check collisions with parts and fixturesdefined in the part operation. During a contour driven operation, an extra guide may be definedin several ways:

• By two points

• By a point and direction

• By an automatic guide contour computed to enable contact points on a guide curve

Multiple radial passes may be operated for thread and circular milling operations.

Enlarges and optimizes machining process and technology

V5.19 introduces new operations for NC machines. A new mode, by offset on contour, isincluded for plunge milling, the clearance management is federated, and tool path cornerizationis available. In milling and turning, the user has the ability to manage the C-axis on a turret, andit is now possible to conduct process machining on the main spindle and the counter spindlepart with the same tool. Also, the user may invert the tool orientation (0-180 degrees). Both aconical tool and a user profile tool are supported in IPM generation for profile contouring in DPMmachining.

Design performance for innovation

Increases sales through on the plant, architecture, and construction industries thanks tonew capabilities in terrain modeling

These powerful improvements include the ability to:

• Work with meshed surfaces and volumes including tessellation and multi-slice commands

• Edit the meshes easily

• Create and manage Z-Level curves

• Benefit from dedicated improvements to the building implantation and enhancements to thegraphic performances

Provides the intersection edge fillet command to improve update stability during designchanges

The new intersection edge fillet command increases the part design user's daily productivity bymaking it possible for the user to:

• Create fillets with the appropriate definitions, including definitions by the intersection of severalfeatures and beyond the intersection of faces

• Rely on improved update stability during design changes

• Capture and reuse part design features easily

The user can define a power copy that includes a set of features and a fillet defined at thefeature intersection level. When this power copy feature is re-instantiated in another context, thefillet is correctly updated since it does not depend on the intersection of the selected faces butinstead on the intersection of the features.



Improves productivity by providing easier definition and better stability of the blendcorner capability

This improvement extends the use of the blend corner capability for fillet definition (removingsmall edges selection) and prevents the redefinition of former blend corners when modifying anedge fillet. The user interface for creation by selection of edges or vertices, edition of the value,and remove is enhanced to improve productivity.

Allows the user to define the gage taper hole main diameter using the selected face as thereference

The user interface of the gage taper hole is improved to provide a new computation mode thatenables the user to compute the tapered hole using the selected face as the reference for themain diameter.

Breakthrough technologies

Improves and accelerates the part and tooling design review process formanufacturability with wall thickness analysis for the Cast & Forged Optimizer (CFO)product

V5.19 delivers Cast & Forged Optimizer (CFO) with wall thickness analysis. This new capability

• Improves and accelerates the part and tooling design review process for manufacturability inboth casting and forging processes and injection molding processes for plastic part design

• Allows the user to analyze the part thickness either by projecting a ray from the selected pointinside the part and normally to its surface, or by rolling a sphere of a maximum diameter insidethe part

• Allows detailed and accurate analysis and provides quick identification of critical thin or thickareas using a dynamic sectioning view and a transparent mode display

Ensures automatic filleting in shape design

Automatic filleting provides a significant process improvement, especially for the design ofplastic and molded parts. Previously, the process of filleting sharp edges to conform to existingfeatures was a repetitive and very time-consuming phase of the shape design process. This newcapability is particularly helpful for fillet manufacturing preparation because it can automaticallyfillet the sharp edges of a shape in a single operation.

Permits fast surface creation from curves in the Imagine and Shape product

Two new primitive commands are added to provide an intuitive and productive interface with noadditional geometry creation. The extruded profile command enables the user to draw directlythe profile from the extrude command. Profile modification can be accomplished dynamicallywithin the extrude command, and a command is provided to revolve the profile around an axisdefinition.

Collaborative PLM

Improves 3DXML export with shader support

Full compatibility with CgFX is provided for shadows. More materials are added to the materialslibrary, such as CarPaint and external shaders that can be imported to add even more effects.

Improves 3D annotations review using 3D XML

The functional tolerancing and annotation (FT&A) features defined in CATProduct and inCATProcess documents can be saved in .3dxml documents as well as .CATPart annotations.This allows the user to review them either using the DMU Dimensioning & Tolerancing Reviewproduct or the 3D Live FT&A review product.



Supports new CAD formats

New multiCAD formats are supported, including SW2007, SW2008, SolidEdge V20, andParasolid V18.

Easy, open and smart

Provides CATIA application infrastructures with large scale management capabilities todesign large scale objects

After addressing the small scale management needs of the micro-electro-mechanical systemsindustry in V5.18, CATIA V5.19 delivers large scale management (from 0.1 mm up to 10 kms)capabilities using mechanical infrastructure. This infrastructure enables the user to design largescale 3D objects, such as dams, and to benefit from complete integration in the GenerativeDrafting and 2D Layout products.

Delivers advanced effects in rendering including soft shadows from multiple light sources

Shadows are made more realistic with the addition of multiple light sources. The user has theability to compute and store light maps off-line and then load them so that a scene can berendered in real time without waiting on calculations to be completed.

Ensures alignment to the latest PROStep/PDES.inc recommended practices for thecontrol of STEP transfers

New STEP validation properties are taken into account for assemblies, allowing the user tocheck assemblies conversion even when geometry is not exchanged, as in the case of nestedassemblies.

Accessibility by people with disabilities

Owing to the graphics-intensive nature of its engineering design applications, this product hasbeen granted a deviation.

Product positioning

CATIA V5 is the leading solution for product excellence. It addresses all manufacturingorganizations, from OEMs, through their supply chains, to small independent producers.The range of CATIA V5 capabilities allows application in a wide variety of industries, such asaerospace, automotive, industrial machinery, electrical, electronics, shipbuilding, plant design,and consumer goods, including design for such diverse products as jewelry and clothing.

CATIA V5 is the only solution capable of addressing the complete product developmentprocess, from product concept specification through product-in-service, in a fully integrated andassociative manner. Based on an open, scalable architecture, it facilitates true collaborativeengineering across the multidisciplinary extended enterprise, including style and form design,mechanical design and equipment and systems engineering, managing digital mock-ups,machining, analysis, and simulation. By enabling enterprises to reuse product design knowledgeand accelerate development cycles, CATIA V5 helps companies speed-up their responses tomarket needs.

In conjunction with ENOVIA VPLM and ENOVIA SmarTeam for life-cycle management anddecision support and DELMIA for manufacturing engineering, CATIA V5 is a key component ofcollaborative PLM.

Much beyond pure CAD software packages, which provide geometry modeling features fordesign-centric companies, CATIA V5 delivers the keys to PLM for process-centric companies:

• Product to market. CATIA is about product excellence. From the earliest product concept toproduction tooling, its concurrent engineering and design-in-context capabilities create valueby enabling companies to create products and bring them to the market.



• Time to market. The unequalled process coverage of CATIA, combined with the nativeassociativity among all of its applications, gives CATIA customers the means to shorten thetime to market.

• Right to market. CATIA's integrated analysis, simulation, synthesis, and optimizationapplications provide product engineering validation at each design step to ensure productquality and market acceptance.

• Lead the market. CATIA's advanced capabilities for collaborative engineering, knowledgecapture, and re-use boost innovation and help customers to lead the market.

The three CATIA V5 platforms (P1, P2, and P3) make CATIA the most scalable solution forproduct creation. CATIA V5 P1 users benefit from PLM productivity in an affordable way withthe security of potential growth. They can conduct associative product engineering based onCATIA V5 product design-in-context, product knowledge reuse, end-to-end associativity, productvalidation, and collaborative change management capabilities.

CATIA V5 P2 users can optimize their PLM processes through knowledge integration, processaccelerators, and customized tools. They can drive generative product engineering based on thelargest application portfolio. They can perform "design-to-target," extensively capture and re-useknowledge, and stimulate collaborative innovation.

CATIA V5 P3 users access the highest productivity for specific advanced processes withfocused solutions. They can lead expert engineering and advanced innovation, relying on uniqueand very specialized applications that integrate product and process expertise.

The CATIA V5 world is fully scalable because the P1, P2, and P3 platforms operate on thesame data model, methodology, and management schemes. By enabling users to install P2applications on top of P1 seats and by standardizing graphical user interfaces across platforms,P1 users can immediately do collaborative design within their extended enterprise with P2 usersand later grow with P2 and P3 platforms as their business grows.

Product positioning - Globalization

CATIA V5 program integrated information (PII) and softcopy product information are available in:

• French

• German

• Italian

• Japanese

PII is stored in compressed unicode format (UTF-8) for worldwide exchange without the loss ormisinterpretation of characters.

Hardware and software support services

SmoothStart/installation services

IBM® SmoothStart/Installation Services are not available for CATIA products.

CATIA V5 services plan

PLM Services, part of IBM Global Services, offers a robust portfolio of services to assist with theimplementation of CATIA V5. Careful planning and implementation are essential to getting themost from CATIA V5. IBM PLM Services provides an Implementation for CATIA V5 ServicesOffering specifically designed to move an enterprise smoothly and successfully from CATIA V4or other CAD systems to CATIA V5 via a flexible path that can be customized to the enterprise'sneeds. We can help with assessment, solution design, planning, installation, data migration,custom application development, best practices consulting, user and administrative training,support, and project management.



For additional information on service offerings and how IBM professionals can assist with theimplementation of CATIA V5 in your environment, contact your IBM representative or IBMServices organization or visit

http://www.ibm.com/software/plm/services

Select Find out more about IBM PLM services listed under Further information on the right.

Enhanced Support Offering

Direct customer support is available under the Product Lifecycle Management Support Services- Enhanced Support Offering (ESO). Refer to this topic in the Terms and conditionssection foradditional information.

Reference information

For information about Component Application Architecture Rapid Application DevelopmentEnvironment (CAA RADE) V5.19, refer to Software Announcement 208-220, dated September23, 2008

For information about ENOVIA VPLM V5.19, refer to Software Announcement208-219, datedSeptember 23, 2008

For information about ENOVIA SmarTeam V5.19, refer to Software Announcement208-217,dated September 23, 2008.

Program number

These product numbers are used for ordering.

CATIA V5 P1

Program Programnumber name Mechanical Design configurations

5671-MD1 CATIA - Mechanical Design 1 Configuration5671-ME1 CATIA - Mechanical Engineering 1 Configuration5671-DR1 CATIA - Drafting 1 Configuration5671-XM1 CATIA - Extended Mechanical Design 1 Configuration

Mechanical Design products

5673-AS1 CATIA - Assembly Design 1 Add-on Product (AOP)5671-WD1 CATIA - Weld Design 1 Product5673-WD1 CATIA - Weld Design 1 AOP5673-PD1 CATIA - Part Design 1 AOP5671-FR1 CATIA - Part Design Feature Recognition 1 Product5673-FR1 CATIA - Part Design Feature Recognition 1 AOP5671-WS1 CATIA - Wireframe & Surface 1 Product5673-WS1 CATIA - Wireframe & Surface 1 AOP5673-GD1 CATIA - Generative Drafting 1 AOP5671-ID1 CATIA - Interactive Drafting 1 Product5673-ID1 CATIA - Interactive Drafting 1 AOP5671-LO1 CATIA - 2D Layout for 3D Design 1 Product5673-LO1 CATIA - 2D Layout for 3D Design 1 AOP5673-FT1 CATIA - 3D Functional Tolerancing & Annotation 1 AOP5671-TG1 CATIA - Tooling Design 1 Product5673-TG1 CATIA - Tooling Design 1 AOP5671-HA1 CATIA - Healing Assistant 1 Product5673-HA1 CATIA - Healing Assistant 1 AOP

http://www.ibm.com/software/plm/services

http://www.ibm.com/common/ssi/cgi-bin/ssialias?infotype=an&subtype=ca&appname=gpateam&supplier=897&letternum=ENUS208-220





5673-SM1 CATIA - Sheetmetal Design 1 AOP5671-SH1 CATIA - Sheetmetal Production 1 Product5673-SH1 CATIA - Sheetmetal Production 1 AOP5671-SR1 CATIA - Structure Design 1 Product5673-SR1 CATIA - Structure Design 1 AOP5671-FM1 CATIA - Functional Molded Parts 1 Product5673-FM1 CATIA - Functional Molded Parts 1 AOP

Shape Design and Styling configurations

5671-YM1 CATIA - Styled Mechanical Design 1 Configuration

Shape Design and Styling products

5673-RT1 Real Time Rendering 1 AOP5673-PH1 Photo Studio 1 AOP5673-GS1 CATIA - Generative Shape Design 1 AOP5673-FS1 CATIA - FreeStyle Shaper 1 AOP

5671-FSK CATIA - FreeStyle Sketch Tracertm 1 Product

5673-FSK CATIA - FreeStyle Sketch Tracer 1 AOP5671-DL1 CATIA - Developed Shapes 1 Product5673-DL1 CATIA - Developed Shapes 1 AOP

Product Synthesis products

5673-KE1 CATIA - Knowledge Expert 1 AOP5671-KT1 CATIA - Product Knowledge Template 1 Product5673-KT1 CATIA - Product Knowledge Template 1 AOP5673-DN1 CATIA - DMU Navigator 1 AOP5673-SP1 DMU Space Analysis 1 AOP5673-DT1 DMU Dimensioning & Tolerancing Review 1 AOP

Equipment and Systems Engineering products

5671-CBD CATIA - Circuit Board Design 1 Product5673-CBD CATIA - Circuit Board Design 1 AOP5671-SRT CATIA - Systems Routing 1 Product5673-SRT CATIA - Systems Routing 1 AOP5671-EC1 CATIA - Electrical 3D Design & Documentation 1 Product5673-EC1 CATIA - Electrical 3D Design & Documentation 1 AOP5671-PLO CATIA - Plant Layout 1 Product5673-PLO CATIA - Plant Layout 1 AOP

Analysis products

5673-GP1 CATIA - Generative Part Structural Analysis 1 AOP

Machining products

5673-LG1 CATIA - Lathe Machining 1 AOP5673-PG1 CATIA - Prismatic Machining 1 AOP5673-TL1 CATIA - STL Rapid Prototyping 1 AOP5673-NG1 CATIA - NC Manufacturing Review 1 AOP

Infrastructure products

5671-CC1 CATIA - CADAM Interface 1 Product5673-CC1 CATIA - CADAM Interface 1 AOP5671-IG1 CATIA - IGES Interface 1 Product5673-IG1 CATIA - IGES Interface 1 AOP5671-ST1 CATIA - STEP Core Interface 1 Product5673-ST1 CATIA - STEP Core Interface 1 AOP5673-RM1 Digital Product Rights Manager 15671-C12 CATIA - COM 1 to 2 Extension Product5673-C12 CATIA - COM 1 to 2 Extension AOP5673-EW1 CATIA - ENOVIAVPM Supply Chain Engineering Exchange 1 AOP5671-CD1 CATIA - Instant Collaborative Design 1 Product5673-CD1 CATIA - Instant Collaborative Design 1 AOP5671-DF1 CATIA - Product Data Filtering 1 Product5673-DF1 CATIA - Product Data Filtering 1 AOP5671-PX1 CATIA - PPR PDM Gateway 1 Product5673-PX1 CATIA - PPR PDM Gateway 1 AOP



5671-PDL MultiCAx - PD Plug-in Product5671-IDL MultiCAx - ID Plug-in Product5671-UDL MultiCAx - UD Plug-in Product5671-DSL MultiCAx - SolidWorks Plug-in Product5671-DEL MultiCAx - SE Plug-in Product5671-DAL MultiCAx - AD Plug-in Product5671-DTL MultiCAx - STEP Plug-in Product5671-DGL MultiCAx - IGES Plug-in Product

CATIA V5 P2

Program Programnumber name Migration configurations

5671-ADD CATIA - Advanced Design 2 Configuration5671-SBD CATIA - Solid Based Design 2 Configuration

Mechanical Design configurations

5671-MS2 CATIA - Mechanism Simulation 2 Configuration5671-MD2 CATIA - Mechanical Design 2 Configuration5671-ME2 CATIA - Mechanical Engineering 2 Configuration5671-DP2 CATIA - Drawing Production 2 Configuration5671-SD2 CATIA - Sheetmetal Design 2 Configuration5671-XM2 CATIA - Extended Mechanical Design 2 Configuration5671-CV2 CATIA - Core & Cavity Design 2 Configuration


5671-HD2 CATIA - Hybrid Design 2 Configuration5671-YM2 CATIA - Styled Mechanical Design 2 Configuration5671-FS2 CATIA - FreeStyle Shaper 2 Configuration5671-SO2 CATIA - FreeStyle Optimizer 2 Configuration5671-RE2 CATIA - Reverse Engineering 2 Configuration

Equipment and Systems Engineering configurations

5671-EF2 CATIA - Electrical System Functional Definition 2 Configuration5671-ER2 CATIA - Electrical Signal Routing 2 Configuration5671-DI2 CATIA - Systems Diagrams 2 Configuration5671-EI2 CATIA - Electrical Wire Harness Installation 2 Configuration5671-PL2 CATIA - Plant Layout 2 Configuration

Analysis configurations

5671-SA2 CATIA - Structural Analysis 2 Configuration

Machining configurations

5671-PM2 CATIA - Prismatic Machinist 2 Configuration5671-RP2 CATIA - Preparation Prismatic Machinist 2 Configuration5671-MO2 CATIA - Mold & Die Machinist 2 Configuration5671-RM2 CATIA - Preparation Mold & Die Machinist 2 Configuration5671-AM2 CATIA - Designer & Advanced Machinist 2 Configuration

Mechanical Design products

5671-ASD CATIA - Assembly Design 2 Product5673-ASD CATIA - Assembly Design 2 AOP5671-PDG CATIA - Part Design 2 Product5673-PDG CATIA - Part Design 2 AOP5671-GDR CATIA - Generative Drafting 2 Product5673-GDR CATIA - Generative Drafting 2 AOP5671-FTA CATIA - 3D Functional Tolerancing & Annotation 2 Product



5673-FTA CATIA - 3D Functional Tolerancing & Annotation 2 AOP5671-CCV CATIA - Core & Cavity Design 2 Product5673-CCV CATIA - Core & Cavity Design 2 AOP5671-MTD CATIA - Mold Tooling Design 2 Product5673-MTD CATIA - Mold Tooling Design 2 AOP5671-SMD CATIA - Sheetmetal Design 2 Product5673-SMD CATIA - Sheetmetal Design 2 AOP5671-CPE CATIA - Composites Engineering 2 Product5673-CPE CATIA - Composites Engineering 2 AOP5671-CPM CATIA - Composites Design for Manufacturing 2 Product5673-CPM CATIA - Composites Design for Manufacturing 2 AOP5671-FMP CATIA - Functional Molded Parts 2 Product5673-FMP CATIA - Functional Molded Parts 2 AOP5671-CFO CATIA - Cast & Forged Part Optimizer 2 Product5673-CFO CATIA - Cast & Forged Part Optimizer 2 AOP

Shape Design and Styling products

5671-RTR Real Time Rendering 2 Product5673-RTR Real Time Rendering 2 AOP5671-PHS Photo Studio 2 Product5673-PHS Photo Studio 2 AOP5671-PSO Photo Studio Optimizer 2 Product5673-PSO Photo Studio Optimizer 2 AOP5671-DSS CATIA - Shape Sculptor 2 Product5673-DSS CATIA - Shape Sculptor 2 AOP5671-IMA CATIA - Imagine & Shape 2 Product5673-IMA CATIA - Imagine & Shape 2 AOP5671-GSD CATIA - Generative Shape Design 25673-GSD CATIA - Generative Shape Design 2 AOP5671-GSO CATIA - Generative Shape Optimizer 2 Product5673-GSO CATIA - Generative Shape Optimizer 2 AOP5671-FSS CATIA - FreeStyle Shaper 2 Product5673-FSS CATIA - FreeStyle Shaper 2 AOP5671-FSO CATIA - FreeStyle Optimizer 2 Product5673-FSO CATIA - FreeStyle Optimizer 2 AOP5671-FSP CATIA - FreeStyle Profiler 2 Product5673-FSP CATIA - FreeStyle Profiler 2 AOP5671-DSE CATIA - Digitized Shape Editor 2 Product5673-DSE CATIA - Digitized Shape Editor 2 AOP5671-RSO CATIA - Realistic Shape Optimizer 2 Product5673-RSO CATIA - Realistic Shape Optimizer 2 AOP5671-QSR CATIA - Quick Surface Reconstruction 2 Product5673-QSR CATIA - Quick Surface Reconstruction 2 AOP5671-ABT CATIA - Automotive Body in White Templates 2 Product5673-ABT CATIA - Automotive Body in White Templates 2 AOP


5671-KWA CATIA - Knowledge Advisor 2 Product5673-KWA CATIA - Knowledge Advisor 2 AOP5671-KWE CATIA - Knowledge Expert 2 Product5673-KWE CATIA - Knowledge Expert 2 AOP5671-PEO CATIA - Product Engineering Optimizer 2 Product5673-PEO CATIA - Product Engineering Optimizer 2 AOP5671-PKT CATIA - Product Knowledge Template Definition 2 Product5673-PKT CATIA - Product Knowledge Template Definition 2 AOP5671-PFD CATIA - Product Function Definition 2 Product5673-PFD CATIA - Product Function Definition 2 AOP5671-BK2 CATIA - Business Process Knowledge Template 2 Product5673-BK2 CATIA - Business Process Knowledge Template 2 AOP5671-DMN CATIA - DMU Navigator 2 Product5673-DMN CATIA - DMU Navigator 2 AOP5671-SPA DMU Space Analysis 2 Product5673-SPA DMU Space Analysis 2 AOP5671-FIT DMU Fitting Simulator 2 Product5673-FIT DMU Fitting Simulator 2 AOP5671-KIN DMU Kinematics Simulator 2 Product5673-KIN DMU Kinematics Simulator 2 AOP5671-DMO DMU Optimizer 2 Product5673-DMO DMU Optimizer 2 AOP5671-ANR DMU Engineering Analysis Review Product5673-ANR DMU Engineering Analysis Review AOP



5671-CPR DMU Composites Review 2 Product5673-CPR DMU Composites Review 2 AOP5671-FAR DMU Fastening Review 2 Product5673-FAR DMU Fastening Review 2 AOP5671-SPE CATIA - DMU Space Engineering Assistant 2 Product5673-SPE CATIA - DMU Space Engineering Assistant 2 AOP5671-FLX CATIA - Flex Physical Simulation 2 Product5673-FLX CATIA - Flex Physical Simulation 2 AOP5671-HBR Human Builder 2 Product5673-HBR Human Builder 2 AOP5671-HTC Human Anthropometry Catalog 2 Product5673-HTC Human Anthropometry Catalog 2 AOP5671-HPC Human Posture Catalog 2 Product5673-HPC Human Posture Catalog 2 AOP5671-HAC Human Preferred Angles Catalog 25673-HAC Human Preferred Angles Catalog 2 AOP5671-HME Human Measurements Editor 2 Product5673-HME Human Measurements Editor 2 AOP5671-HPA Human Posture Analysis 2 Product5673-HPA Human Posture Analysis 2 AOP5671-VOA Vehicle Occupant Accommodation 2 Product5673-VOA Vehicle Occupant Accommodation 2 AOP5671-HAA Human Activity Analysis 2 Product5673-HAA Human Activity Analysis 2 AOP

Equipment and Systems Engineering products

5671-SSR CATIA - Systems Space Reservation 2 Product5673-SSR CATIA - Systems Space Reservation 2 AOP5671-EFD CATIA - Electrical System Functional Definition 2 Product5673-EFD CATIA - Electrical System Functional Definition 2 AOP5671-ELB CATIA - Electrical Library 2 Product5673-ELB CATIA - Electrical Library 2 AOP5671-EWR CATIA - Electrical Wire Routing 2 Product5673-EWR CATIA - Electrical Wire Routing 2 AOP5671-EHI CATIA - Electrical Harness Installation 2 Product5673-EHI CATIA - Electrical Harness Installation 2 AOP5671-EHF CATIA - Electrical Harness Flattening 2 Product5673-EHF CATIA - Electrical Harness Flattening 2 AOP5671-ELD CATIA - Electrical Connectivity Diagrams 2 Product5673-ELD CATIA - Electrical Connectivity Diagrams 2 AOP5671-ECR CATIA - Electrical Cableway Routing 2 Product5673-ECR CATIA - Electrical Cableway Routing 2 AOP5671-PID CATIA - Piping & Instrumentation Diagrams 2 Product5673-PID CATIA - Piping & Instrumentation Diagrams 2 AOP5671-HVD CATIA - HVAC Diagrams 2 Product5673-HVD CATIA - HVAC Diagrams 2 AOP5671-SDI CATIA - Systems Diagrams 2 Product5673-SDI CATIA - Systems Diagrams 2 AOP5671-PIP CATIA - Piping Design 2 Product5673-PIP CATIA - Piping Design 2 AOP5671-TUB CATIA - Tubing Design 2 Product5673-TUB CATIA - Tubing Design 2 AOP5671-EQT CATIA - Equipment Arrangement 2 Product5673-EQT CATIA - Equipment Arrangement 2 AOP5671-CNA CATIA - Compartment & Access 2 Product5673-CNA CATIA - Compartment & Access 2 AOP5671-HVA CATIA - HVAC Design 2 Product5673-HVA CATIA - HVAC Design 2 AOP5671-SFD CATIA - Structure Functional Design 2 Product5673-SFD CATIA - Structure Functional Design 2 AOP5671-WGD CATIA - Waveguide Diagrams 2 Product5673-WGD CATIA - Waveguide Diagrams 2 AOP5671-TUD CATIA - Tubing Diagrams 2 Product5673-TUD CATIA - Tubing Diagrams 2 AOP5671-WAV CATIA - Waveguide Design 2 Product5673-WAV CATIA - Waveguide Design 2 AOP5671-RCD CATIA - Raceway & Conduit Design 2 Product5673-RCD CATIA - Raceway & Conduit Design 2 AOP5671-HGR CATIA - Hanger Design 2 Product5673-HGR CATIA - Hanger Design 2 AOP5671-SDD CATIA - Ship Structure Detail Design 2 Product5673-SDD CATIA - Ship Structure Detail Design 2 AOP



Analysis products

5671-GPS CATIA - Generative Part Structural Analysis 2 Product5673-GPS CATIA - Generative Part Structural Analysis 2 AOP5671-GAS CATIA - Generative Assembly Structural Analysis 2 Product5673-GAS CATIA - Generative Assembly Structural Analysis 2 AOP5671-FMS CATIA - FEM Surface 2 Product5673-FMS CATIA - FEM Surface 2 AOP5671-FMD CATIA - FEM Solid 2 Product5673-FMD CATIA - FEM Solid 2 AOP5671-EST CATIA - ELFINI Structural Analysis 2 Product5673-EST CATIA - ELFINI Structural Analysis 2 AOP5671-GDY CATIA - Generative Dynamic Response Analysis 2 Product5673-GDY CATIA - Generative Dynamic Response Analysis 2 AOP

Machining products

5671-LMG CATIA - Lathe Machining 2 Product5673-LMG CATIA - Lathe Machining 2 AOP5671-PMG CATIA - Prismatic Machining 2 Product5673-PMG CATIA - Prismatic Machining 2 AOP5671-SMG CATIA - 3 Axis Surface Machining 2 Product5673-SMG CATIA - 3 Axis Surface Machining 2 AOP5671-MMG CATIA - Multi-axis Surface Machining 25673-MMG CATIA - Multi-axis Surface Machining 2 AOP5671-AMG CATIA - Advanced Machining 2 Product5673-AMG CATIA - Advanced Machining 2 AOP5671-MLG CATIA - Multi-slide Lathe Machining 2 Product5673-MLG CATIA - Multi-slide Lathe Machining 2 AOP5671-MPG CATIA - Multi-pocket Machining 2 Product5673-MPG CATIA - Multi-pocket Machining 2 AOP5671-MSG CATIA - NC Machine Tool Simulation 2 Product5673-MSG CATIA - NC Machine Tool Simulation 2 AOP5671-MBG CATIA - NC Machine Tool Builder 2 Product5673-MBG CATIA - NC Machine Tool Builder 2 AOP5671-STL CATIA - STL Rapid Prototyping 2 Product5673-STL CATIA - STL Rapid Prototyping 2 AOP5671-NCG CATIA - NC Manufacturing Review 2 Product5673-NCG CATIA - NC Manufacturing Review 2 AOP5671-NVG CATIA - NC Manufacturing Verification 2 Product5673-NVG CATIA - NC Manufacturing Verification 2 AOP5671-MPA CATIA - Prismatic Machining Preparation Assistant 2 Product5673-MPA CATIA - Prismatic Machining Preparation Assistant 2 AOP

Infrastructure products

5671-STC CATIA - Strim/Styler to C CATIA Interface 2 Product5673-STC CATIA - Strim/Styler to C CATIA Interface 2 AOP5671-EWE CATIA - ENOVIAVPM Supply Chain Engineering Exchange 2 Product5673-EWE CATIA - ENOVIAVPM Supply Chain Engineering Exchange 2 AOP

CATIA V5 P3

Program Programnumber name Mechanical Design configurations

5671-SL3 CATIA - Aerospace Sheetmetal Design 3 Configuration5671-CD3 CATIA - Composites Design 3 Configuration


5671-AB3 CATIA - Automotive Body in White Design 3 Configuration



Product Synthesis configurations

5671-KD3 CATIA - Business Process Knowledge Definition 3 Configuratio

Analysis configurations

5671-TA3 CATIA - Tolerance Analysis of Deformable Assembly 3 ConfigurationMechanical Design products

5673-ASL CATIA - Aerospace Sheetmetal Design 3 AOP


5673-BKT CATIA - Business Process Knowledge Template 3 AOP

Analysis products

5673-TAA CATIA - Tolerance Analysis of Deformable Assembly 3 AOP

CATIA V5 complementary products

Program Programnumber name 5673-CCD CATIA - CADAM Drafting for V5 AOP

CATIA WLS V5

Program Programnumber name Shareable products

5671-HDS CATIA - User Companion for Hybrid Design Product5671-SAS CATIA - User Companion for Structural Analysis Product5671-EAS CATIA - User Companion for Extended Structural Analysis Product5671-SMS CATIA - User Companion for Sheetmetal Product5671-CDS Companion Development Studio Product5671-DNS User Companion for DMU Product Enterprise products

5672-HDS CATIA - User Companion for Hybrid Design Enterprise Option Product5672-SAS CATIA - User Companion for Structural Analysis Enterprise Option Product5672-EAS CATIA - User Companion for Extended Structural Analysis Enterprise Option Product5672-SMS CATIA - User Companion for Sheetmetal Enterprise Option Product5672-DNS User Companion for DMU Enterprise Option ProductShareable configuration

5671-MDC CATIA - User Companion for Mechanical Design: ConfigurationEnterprise configurations

5672-MDC CATIA - User Companion for Mechanical Design: Configuration5672-M4C CATIA - User Companion for V4 Mechanical Design: Configuration



Additional details

This section describes the enhancements to previously announced products delivered in thisrelease. For descriptions of previously announced CATIA V5 and CATIA WLS V5 products andother PLM solutions, visit the PLM Web site

http://www.ibm.com/solutions/plm

Controlled availability of selected CATIA V5 products

The following products, which were generally available, are now in a controlled availability statuswith CATIA V5.19:

• CATIA - Tolerance Analysis of Deformable Assembly 3 (TAA)

• CATIA - Tolerance Analysis of Deformable Assembly 3 Configuration (TA3)

Because of their heavy process orientation, and to ensure proper coverage of customerprocesses, Tolerance Analysis of Deformable Assembly (TAA, TA3) has been moved tocontrolled availability in this release. Address questions about the controlled availability of theseproducts to Rob Hodge (Robert Hodge/UK/IBM@IBMGB).

The following previously announced products remain in a controlled availability status in thisrelease:

• CATIA - DMU Space Engineering Assistant 2 (SPE)

• The purpose of the controlled availability designation for this product is to ensure customerawareness of its introductory nature and the need to verify the readiness of support resourcesand product function to maximize successful deployment. Address questions about thecontrolled availability of this product to Bernie Clark (Bernie Clark/UK/IBM@IBMGB,44-141-3148858).

• CATIA - Electrical System Functional Definition 2 (EF2)

• CATIA - Electrical System Functional Definition 2 (EFD)

• The purpose of the controlled availability designation for these products is to ensure customerawareness of their process-oriented nature and the need to verify the readiness of supportresources and product function to maximize successful deployment. Address questions aboutthe controlled availability of these products to Dimitri Steijlen (Dimitri Steijlen/Netherlands/IBM@IBMNL, 31-205134845.

During the controlled availability period, orders for the above products can be placed in theusual manner. However, warning messages have been added to the configurators to serve as areminder of their controlled availability status.

CATIA Platform 1 (P1)

CATIA V5.19 enhances numerous previously announced products.

Enhanced products

Enhancements to a P1 product also apply to the corresponding P2 product.

Mechanical Design

CATIA - Assembly Design 1 (AS1)

• Associative product to part with PRC context - This assembly feature is enhanced to providea warning to the user if the user attempts to create a feature in the structure exposed mode(mode of the active product). If this occurs, the feature will not be created.

• Associative product to part - A new command is added to the Assembly Features toolbar toenable users to add any geometry to a target part even after the part has been created. Usingthis interface, the user may create a manual list of part instances to add to a target part.




• Redundancy constraint check activate/deactivate - This new setting is added to activate anddeactivate the redundancy constraint check.

CATIA - Part Design 1 (PD1)

• Gage Taper Hole - This new computation mode allows the user to compute the tapered holeby using the selected face as the reference for the main diameter.

• Display parameters in specification tree - This new option improves productivity by making theparameter values for selected features directly available in the specification tree.

• As Result With Link Sketch Positioning - This new option makes the sketch positioning panelavailable for the Sketches As Result With link. This function provides designers with theability to specify the 3D position of a Sketch ARWL, when possible for standard sketches, bydefining:

– The support

– The origin

– The orientation of either the horizontal or vertical direction

In addition, a new positioning mode, Positioned as Reference, is now available to enabledesigners to restore the position link with the reference sketch as needed.

• As Result With Link Sketch Explode - This new explode capability enables the user to switchfrom a Sketch ARWL to a standard sketch for editing purposes. Once exploded, the sketch isno longer associated to its initial reference sketch, if one exists.

• Drag-and-drop robustness: Reorder use - The drag-and-drop operation is improved witha new Using Reorder option. This option ensures that from the drag position to the dropposition, the original feature remains the same and the name of the feature is no longerchanged when it is moved.

CATIA - Part Design Feature Recognition 1 (FR1)

Colorization of corners - The colorization for corners rules are modified to ensure that when thelimiting faces of a corner have the same radius, the corner is displayed with the same color. Thismodification helps increase productivity by reducing the number of corners that will have to bechecked manually.

CATIA - Wireframe & Surface 1 (WS1)

• Additional Knowledge Generative Shape Design evaluator - This new option extends thescope of Generative Shape Design (GSD) feature creation via knowledge. New GSD featuresinclude:

– Projection along a direction

– Boundary

– Fill

– Invert

– Transformations

• Extends inputs of Points&Planes Repetition command - The additional element in the userinterface allows curves and points to be selected separately. This provides more flexibility andmakes the command more useable with a larger usage scope.

• Adds preview button on Points&Planes Repetition command - This new preview mechanismon the Points&Planes Repetition command saves valuable time on the try-error process.

• Includes large Scale support - This is a new option for managing large scale numerical valuesin the geometric modeler tolerance. This is particularly useful for the power, process, andpetroleum industry.

• Displays preview button on Planes Between command - This new preview mechanism on thePlanes Between command saves time on the try-error process.

• Includes new behavior for drag-and-drop using reorder - The user can move a selectedfeature from one position to another in the product structure without using the copy and pasteoperations that create temporary features. When the drag-and-drop operation using reorder iscomplete:

– The original feature remains the same from drag position to drop position.



– The feature name is no longer changed.

– The features that have the dragged and dropped feature as parent will update.

CATIA - Generative Drafting 1 (GD1)

• Propagation of Functional Tolerancing and Annotation (FTA) and 2D layout view modificationon update - A generative drafting view defined from a 3D view, either from an FTA or a 2Dlayout view, can be synchronized during the update of the view in the drawing document.When the projection/section plane is modified in the 3D part, the view becomes out-dated in2D and will be updated during the view update process.

• Clipping Box user interface enhancements for selection of geometry to define box size. - It ispossible to select geometry in 3D or 2D view (point, line, plane, planar face, or edge) to easilydefine the limits of the 3D clipping object. Ship building customers, for instance, can selectplanes in the ship/plant grid for this definition.

CATIA - Interactive Drafting 1 (ID1)

• Elements visualization in specification tree (Fixtogether, 2D Component instances, andActive Sheet in blue) - This option makes objects defined during the 2D design process, suchas Fixtogether or 2D Component instances, visible in the specification tree of the drawingdocument objects. This update allows for easy selection, a contextual menu is provided,and the user can benefit from the cross-highlight between the 2D representation and thespecification tree.

• Broken hybrid constraint visualization - Geometric constraints that have a broken link to ageometric element generated from a 3D model are now visible in the graphic window, so thatthe user may gain an easier access to them and may destroy them if needed. A link is brokenwhen the generated element supporting the constraint disappears after a modification to the3D model's shape.

• Export Details to DXF Blocks - This feature makes data sharing in a MultiCAD context easierby improving the semantic information that is available after export. The export of a CATIA2D Component instance in AutoCAD DXF/DWG format bears more semantics, such as thedetail name, the ditto point, the layer of detail's entities, and the geometry types. For example,splines, nurbs, and ellipse are no longer converted into polylines.

• DXF export that supports AutoCAD 2004 and AutoCAD 2007 - The export of CATIA drawingentities allows the user to convert them and to generate DXF or DWG files compatible withAutoCAD 2004 and AutoCAD 2007 versions. This makes the export more consistent withthe import process, which can convert AutoCAD 2004, 2005, and 2006 entities in the V5R17version and AutoCAD 2007 entities in V5R18 version.

• Rigid position link for annotations - When the position of an annotation relative to its referenceis not intended to change, the user may fix it by imposing a rigid behavior on the position link.Since the relative position may no longer be modified by direct manipulation of the annotation,the rigid position link offers security against involuntary moves.

CATIA - 2D Layout for 3D Design 1 (LO1)

• Elements visualization in specification tree (Fixtogether, 2D Component instances, Use edges,and Active Sheet in blue) - This option makes objects defined during the 2D design process,such as Fixtogether or 2D Component instances, visible in the specification tree of the partdocument. This update allows for easy selection, a contextual menu is provided, and the usercan benefit from the cross-highlight between the 2D representation and the specification tree.

• Rigid position link for annotations - When the position of an annotation relative to its referenceis not intended to change, the user may fix it by imposing a rigid behavior on the position link.Since the relative position may no longer be modified by direct manipulation of the annotation,the rigid position link offers security against involuntary moves.

CATIA - 3D Functional Tolerancing & Annotation 1 (FT1)

• Display, query, filter, save as CGR, and 3D XML of FTA result features - Result annotationfeatures are light features (features with a small data size) generated by the conversion oftolerancing and annotation data coming from CATIA V6 or from a MultiCAD context. Like theregular annotations, these result annotations can be displayed, filtered, and saved in CGR or3D XML light formats.

• Save as 3D XML of CATProduct and CATProcess FTA data - The annotations included inCATProducts or CATProcesses can be saved in 3D XML light format. This format enables



the user to review the annotations with the ENOVIA DMU Dimensioning & Tolerancing reviewproduct in V5 or with the CATIA Live FTA Review (LFT) product in V6.

• Upgrade of annotation set - This upgrade capability allows annotation sets created beforeV5R18 to follow geometry changes after a replace operation. When a Generative ShapeDesign (GSD) feature is replaced by another one, the FTA features of the upgradedannotation sets are impacted and update themselves in reaction to this change.

CATIA - Tooling Design 1 (TG1)

• User Component

– The set of icons used for components is predefined and is now dedicated to all the toolingprocesses. Components that are customized in house are represented by a U for Usericon. There is an extreme variety of components that a company can define and use.

– Users can now customize the various icons of the various user component templates. Thisenhancement enables the user to better understand and identify his own die design at firstglance on the specification tree.

– A new parameter named IconRef can be inserted by the user in the parameters ofa CATPart. This parameter allows the user to choose from the icons shown in thespecification tree. This parameter is a string parameter that contains the name of the bitmapfile of the icon. If the parameter is not defined, the default icon is selected during the ToolingDesign insertion of the component.

• Mold to CAM enhancement: Creation of technological results report

– The new command Display Technological Results (with MPA license) allows the user toaccess the Reporting of Die/Mold Technological Results report.

– Any user of Tooling Design 1 who has an MPA license can benefit from enhancedcapabilities for the Mold to CAM capability.

– A reporting command allows the user to create a report (*.csv) on the Technological Resultsexisting in a given die. The company can then use this report to define some in houseprocesses between the Design and the Manufacturing stage.

– This enhancement provides a powerful tool to control the integrity of the Die design,preventing costly iteration between design and manufacturing.

• ENOVIA SmarTeam integration: Management of editability on impacts

– To facilitate concurrent engineering, tooling interface files can be pre-defined. This featureallows each user to create his own tooling interface files in a specified manner withoutinterference with the tooling interface files used by another user.

– ENOVIA SmarTeam supports concurrent engineering by allowing a correct check-out (read/write status) of the elements each user would like to work on.

– The enhanced access control to tooling interface files helps to prevent data loss andunnecessary work when files have been checked out incorrectly.

CATIA - Sheetmetal Design 1 (SM1)

• Better process coverage with marking/engraving functionality

– Integration of unfolded curve in drawing

– Capacity to put a semantic on the unfolded curve feature, including marking, engraving,characteristic element or construction element.

– Ability to represent it in the drawing according a standard. This standard allows the userto make the parameter and the graphic properties visible according to the type (marking,engraving, or characteristic element) of the curve or its position.

• Design productivity is increased with powerful extrusion explode improvement.

– Explode mode allows the user to generate an associative wall on edge

– Accelerate the design by creating an extrusion

– Exploded extrusions allow the user to locally modify the design and maintain associativity

• Sheetmetal feature visualization in the DMU specification tree - This enhancement enablesthe user to correctly display the tree of a sheetmetal part in DMU. This ensures that allsheetmetal features will have:

– The correct icons

– The correct names



– The correct aggregated features under them

CATIA - Structure Design 1 (SR1)

• Manipulator on Shape

– The Structure Design 1 (SR1) profile creation and edition command provides dialog controlsto manipulate (flip, rotate, change anchor point, etc.) the current profile. These controlsinclude:

-- Flip Manipulator: Used to flip the profile and is tied to the command's flip button.

-- Anchor Point Manipulator: Displays a matrix of 3D anchor points specific for a givenprofile. The active anchor point is displayed in red. Inactive anchor points are displayedin green. The user can click on a point to change the profile's anchor point. This control istied to the command's anchor point control.

-- Orient Manipulator: Allows the user to rotate the profile a given number of degrees(determined by the step angle in the command's angle control).

The size, location and orientation of each manipulator is dependant on the parentcommand. Each manipulator will change size as the window is resized. For example, if thewindow is resized and the profile is displayed larger the manipulator will also be displayedlarger.

– Coping Edition: Coping features can be created manually by using the Coping command onexisting SR1 plates and shapes or can be automatically created when using the StructurePiece Part Generator with Structure Functional Design (SFD) or Ship Structure Detaildesign (SDD) data. Therefore the coping edition will work on all coping features regardlessof their creation method. This new coping command will replace the old coping command. Italso adds the new capabilities of edition and deletion of copings.

– Support of Keep link with option: This option helps the client easily manage SR1 externallinks and reduce the number of external links saved into ENOVIA. This in turn should speedup loading of SR1 data from the database into the session.

Shape Design and Styling

CATIA - Generative Shape Design 1 (GS1)

• Canonical detection on Sweep. Users can activate the canonical detection for the sweepportion. This allows the user to use part of sweep geometry as input for other commands.As an example, a cylindrical sweep is now seen as a cylinder and can be re-used as such,thereby extending the usage of these geometries.

• Additional Knowledge Generative Shape Design evaluator - This new option extends thescope of Generative Shape Design feature creation via knowledge. New GSD featuresinclude:


– Boundary

– Fill

– Invert

– Transformations


• Add preview button on Points&Planes Repetition command - This new preview mechanism onthe Points&Planes Repetition command saves valuable time on the try-error process.

• Large scale support - This is a new option for managing large scale numerical values inthe geometric modeler tolerance. This is particularly useful for power, process & petroleumindustry.

• Preview button is displayed on Planes Between command - This new preview mechanism onthe Planes Between command saves time on the try-error process.

• New behavior for drag-and-drop operation using reorder - This new behavior enables theuser to move a selected feature from one position to another in the product structure withoutusing the copy-and-paste operations that create temporary features. When the Drag And DropOperation using Reorder is complete:






CATIA - FreeStyle Shaper 1 (FS1)

• Additional selection filter (trimmed/not trimmed) - This filter enables better productivity bymaking it possible to make multiple consecutive trap selections above geometry, withoutrequiring the user to reselect Trap Selection above geometry before each trap.

• Matching Constraint - This enhancement updated the matching constrain command to make itpossible to match 2 constrains on the same surface.

• Dress-Up - This option enables the user to define different appearances of elementscontained within a CATPart to improve the user's workflow and selection of geometry duringoperation. The different capabilities are listed below:

– Add display options for Apply Dress up for Colors, line, font, etc. on control points andsegmentation

– Switch Control Points on and off without needing to select geometry

– Dress-up scan and mesh capabilities

• Styling fillet - this option returns instant feedback from the Connect Checker Analysis featurewhen creating the fillet which is the deviation value for G0/G1/G2/G3 curvature for thoseoperations:

– Internal connections within ribbon (result fillet).

– Connections between ribbon (result fillet) and supports.

• Cutting plane analysis - This option enhances the user interface of the cutting planes analysiscommand. This command enables the user to compute intersections between surfaces toanalyze and planes (or sections).

• New 2D diagram integration - This new feature enables the user to display several analysissuch as cutting planes and distance analysis)

Analysis

CATIA - Generative Part Structural Analysis 1 (GP1)

• OCTREE mesher: node distribution by size. This new option allows the user to locally stabilizethe mesh on a particular area of the model in order to run sensitivity analysis. This methodprevents the need to increase the amount of mesh to ensure the correct analysis result.

• Groups: names including Mesh Part name. This feature enables automatic naming of thegroups in a mesh to be able to find and select them more easily. The user is also able tosearch (Ctrl-F) on a group of mesh.

• New images for better assessment of the results. This enables better result analysis checkingfor both constraint analysis and the flow of momentum or constraints. This is particularlyhelpful in the validation of airframe structures in the aerospace industry.

• Range values on keep only for the images. This option provides more possibilities foridentifying critical area and gives users the choice to select a range of values to use to filterand analyze elements based on a given criteria more easily. For instance, the user wouldhave the ability to select elements where constraints are between a set of given values.

• Display of occurrence value in color map palette. This option provides label of occurrences inthe color map palette. Occurrences are images representing the mode shape of eigen value oreigen frequency.



Machining

CATIA - Lathe Machining 1 (LG1)

• Mill turret management for lathe operations

– B-axis management for lathe operations - This enhancement allows the user the option ofdefining the turning tool axis corresponding to the B-Axis orientation without requiring a toolchange activity. This provides greater flexibility by enabling the user to specify the tool axison the turning operation editor itself, without requiring a redundant tool change activity.

– Tool axis flip management for lathe operations - This new option provides ability to machinedifferent areas (front and back areas of a part or part on a main spindle and part on acounter-spindle) using the same tool assembly. Only the tool orientation (inversion) differswhen machining the different areas or parts. The user will have the option to flip thetool assembly without requiring a tool change activity. This enables the user to have theflexibility to define the C-axis orientation on the machining operation editor itself, withoutactually requiring a redundant tool change activity.

• Automatic generation of TLAXIS between milling and turning operations - This highlightenables the user to:

– Output a ROTABL/0 statement every time there is a change-over from a turning operationto a milling operation.

– Output TLAXIS statement every time there is a change-over from a milling operation to aturning operation.

CATIA - Prismatic Machining 1 (PG1)

• Helical interpolation output for Circular Milling and Thread Milling operations - For circularmilling and thread milling machining operations which support helix tool motion, a helicalinterpolation instruction can now be generated in the output file. This helical interpolationinstruction can be used by post-processor programs to generate ISO code containing specifichelix instructions. This capability provides the user with better tool path quality on the NCmachine tool by using an optimized output statement in the program output file.

• Intermediate stock management - This option makes it possible to visualize the input and theoutput of intermediate stock for all machining operations. Also, it takes into account the stockin order to optimize and to compute a collision-free tool path.

• Multiple radial passes for thread and circular milling operations - This highlight allows theuser to create multiple passes (rough and finish) for thread milling and circular milling (helicalmode) and would provide the capability to create a spring pass. This prevents the need tocreate separate operations for the rough pass, the finish paths, and the spring pass. Now theuser can specify the paths in one operation.

• Multiple tool axis support in Point-to-Point operation - This highlight provides the ability toselect different tool axis for multiple points in one operation. This simplifies the process of thetool selection, allowing the user to select the tool axis without changing tabs.

• Additional tool types in operations - This enhancement empowers the user to design betteraxial operations by providing additional tools to work with on the existing axial machiningoperations.

Infrastructure

CATIA - STEP Core Interface 1 (ST1)

• Export of light assemblies - The light geometry contained in CATProduct , that can be createdwith the Piping Design and HVAC Design workbenches, is now exported. This is particularlyuseful for shipbuilding applications.

• New STEP validation properties - Two new options are available for checking STEPconversions according to the last level of STEP recommended practices:

– Assembly validation properties option for checking the assembly structure and positionindependently from the geometry. This option is useful especially when the geometry is notexchanged (for example, nested assemblies)

– Check clouds of points properties (COPS) option for ensuring stronger control of thegeometry conversion than the standard geometric validation properties (GVP). At export foreach surface, a set of points positioned on the surface is computed. At import the converterverifies that, for each surface, the points are still on the imported surface.



CATIA - Object Manager 1 (CO1)

• Enterprise architecture

– Adds ability to browse a design table excel sheet that has not been locked

– Provides new operations on lists (+, Extract, Sort)

– Microsoft Excel 2007 is supported for editing, modifying CATIA design table

• PLM infrastructure

– Concurrent offline licensing on Windows 64-bit is supported.

– Windows Vista Enterprise & Business 64-bit (build for CAA, run time)

– Windows Vista Enterprise & Business 32-bit (build for CAA, run time)

– Windows XP 64-bit SP2 is the minimum build run time supported.

– AIX® 5.3 TL05 is the minimum build time and Runtime level supported.

CATIA Platform 2 (P2)

V5.19 enhances numerous previously announced products.

Enhanced products

For P2 products with P1 counterparts, only enhancements that are in addition to those describedfor the P1 product are included here.

Mechanical Design

CATIA - Assembly Design 2 (ASD)

In addition to AS1 highlights:

Associative product to part: Publications in the source parts are automatically re-published in thetarget parts - This capability allows the publication of the pasted bodies in the associated part incase they are published in the source part.

CATIA - Part Design 2 (PDG)

• Upgrade of Part Design features - The upgrade capability that is currently available inGenerative Shape Design (GSD) is now available for all CATIA Part Design features, featureby feature, through a contextual menu.

• Fillet - User Interface improvement of Blend Corner capability - The user can maintain thedefinition of blend corners when modifying an Edge Fillet. This enhancement will help:

– Extend the use of blend corners for fillet definition

– Prevent the selection of small edges or setback constraints

– Prevent the redefinition of former blend corners

New capabilities improve productivity:

– Create by edges

– Create by vertex

– Edit value

– Remove

CATIA - Generative Drafting 2 (GDR)

Enhancements to Generative Drafting 2 are the same as for Generative Drafting 1.

CATIA - 3D Functional Tolerancing & Annotation 2 (FTA)

V4 FD&T migration as V5 FT&A features applied to CATPart migrated geometry - Engineeringintents and annotation requirements coming from the CATIA V4 FD&T data are now migratedin the part definition, rather than in the product definition. This change makes it easier for users



to build and inspect the part. Moreover, this FT&A data is now associative with the V5 migratedgeometry; this migration is available interactively and in a batch mode. This migration is availablein a batch mode only when the None structuring option is specified.

CATIA - Core & Cavity Design 2 (CCV)

Radius Fillet reduction enhancements

• Search Fillets command : Generates several join features gathering all the connected faces tomake the fillet

• Modify Fillet Radius reduction command : Generates dedicated new features simplifying thespecification tree and allowing the user to edit it. It also benefits from a new algorithm thatdramatically increases the success rate of fillet creation with a reduced radius.

CATIA - Mold Tooling Design 2 (MTD)

• User Component

– The set of icons used for components is predefined and is now dedicated to all the toolingprocesses. Components that are customized in house are represented by a U for Usericon. This user icon does not do justice to the extreme variety of components a companycan define and use.

– Users can now customize the various icons of the various user component templates. Thisenhancement enables the user to better understand and identify his own die design at firstglance on the specification tree.

– A new parameter named IconRef can be inserted by the user in the parameters ofa CATPart. This parameter allows the user to choose from the icons shown in thespecification tree. This parameter is a string parameter that contains the name of the bitmapfile of the icon. If the parameter is not defined, the default icon is selected during the ToolingDesign insertion of the component.

• Mold-to-CAM enhancement: Creation of technological results report

– The new command Display Technological Results (with MPA license) allows the user toaccess the Reporting of Die/Mold Technological Results.

– Any user of Tooling Design 1 who has an MPA license can benefit from enhancedcapabilities for Mold to CAM.

– A reporting command allows the user to create a report (*.csv) on the Technological Resultsexisting in a given die. The company can then use this report to define some in houseprocesses between the Design and the Manufacturing stage.

– This enhancement provides a powerful tool to control the integrity of the Die design,preventing costly iteration between design and manufacturing.

• ENOVIA SmarTeam integration: management of editability on impacts

– To facilitate concurrent engineering, tooling interface files can be pre-defined. This featureallows each users to create their own tooling interface files in a specified manner withoutinterference with the tooling interface files used by another user.

– ENOVIA SmarTeam supports concurrent engineering by allowing a correct check-out (read/write status) of the elements each user would like to work on.

– The enhanced access control to tooling interface files helps to prevent data loss andunnecessary work when files are checked out incorrectly.

CATIA - Sheetmetal Design 2 (SMD)

• Better process coverage with marking/engraving functionality

– Integration of unfolded curve in drawing.

– Capacity to put a semantic on the unfolded curve feature, including marking, engraving,characteristic element or construction element.

– Ability to represent it in the drawing according a standard. This standard allows the userto make the parameter and the graphic properties visible according to the type (marking,engraving, or characteristic element) of the curve or its position.

• Increased design productivity with powerful extrusion explode improvement

– Explode mode allows the user to generate an associative wall on edge

– Accelerate the design by creating an extrusion



– Exploded extrusions allow the user to locally modify the design and maintain associativity

• Increased scope of the recognized part

– The feature recognition in Generative Sheetmetal Design now enables the user torecognize the stamps that are impacting bends with the exception of sharp stamps, openedstamps and stamps on the border.

– For unrecognized stamps, only the faces that are delimiting the external and closed shapeof the stamp have to be selected.

• Sheetmetal feature visualization in the DMU specification tree - The user can correctly displaythe tree of a sheetmetal part in DMU. This ensures that all sheetmetal features will have:




CATIA - Composites Engineering 2 (CPE)

• XML File Generation - The export of the ply structure (geometry and stacking information) intoan Initial Graphics Exchange Specification (IGES) or a Drawing eXchange Format (DXF) fileallows external tools to lay or cut the plies efficiently during the manufacturing process.

• Extended generative view styles (GVS) for CATDrawing view management - Geometrical ormanufacturing properties of composites entities (ply/cut piece/core features) may appear inCATDrawing documents in accordance with the generative view styles. Highlight shell, seedpoint, seed curve, contour thickness, color or name may be specified by the administrator.

• New ply book - In the drafting workbench, user can choose whether each sheet of this newply book will be associated to a single ply/cut piece, to a sequence, or to all cut-pieces. All theviews of the reference sheet are generated for each new ply in new sheets with the same viewproperties, position and links.

• Numerical analysis on zones - The numerical analysis command can be run on not only zonesor groups of zones, but also on plies. Using this option, the area, center of gravity, weight orfinal cost of a zone may be computed.

• Non Crimp Fabric (NCF) management - An NCF is a predefined material that assemblesseveral layers of composite materials. These materials will be used in ply as single material,but they will be recognized as several layers by commands that require it.

• Improvement in real-time composites information - Contextual information, such as number,sequence, material, or draping direction, is displayed locally when dragging the mouse abovecomposite elements in 3D or in the specifications tree.

• Ability to limit contour group - A limit for a group of contours can be defined from the geometryof a structural element (a stiffener or a stringer for instance). This limit feature is used as astart position to lay the first contour and to begin the staggering of the other ones. It enablesthe user to modify all plies where the same limit contour has been applied with the samestaggering value in one shot.

• Multi selection of edge of part (EOP) in Inner Mold Line (IML) and solid generation - It ispossible to select several EOP at the same time to generate the IML or the solid from plies.Since the computation is global to the complete Outer Mold Line (OML), time is saved byusing several EOPs in a single row.

• EOP skin swapping - The edges of a part may be projected onto the manufacturing surface,avoiding the need to project it piece by piece and to create manually a new projected edge ofpart.

• Drafting and FTA integration for composite features - Dedicated 3D annotations may be addedto a composite part. For instance, a core sample result may be associated to a feature on aselected point. The value displayed in the 3D annotation is associative: it will be updated eachtime the composite feature is updated.

• Skin swapping: Elevation mode - Using the skin swapping command, the contours of a ply/plies group/stacking/sequence may be projected to a destination surface in an elevationmode. This elevation mode projects the contours perpendicular to the origin surface, and thestacking order of the contours may be inverted.

• Contour validation tool - A new 'check contour' panel, displaying the set of the selected plies,enables the user to check whether their contours present self-intersections or open contours.This applies to regular ply contours and to flat patterns too, if they exist.

• Enhancement in composites material management - It is now possible to specify a range ofnumerical values for each property of any material linked to the composite part. This range



brings the flexibility required by the manufacturing process for these properties. The curedthickness, for instance, may vary due to the pressure applied during the molding process.

CATIA - Composites Design for Manufacturing 2 (CPM)

• XML File Generation - The export of the ply structure (geometry and stacking information)into an IGES or a DXF file allows external tools to lay or cut the plies efficiently during themanufacturing process.

• GVS for CATDrawing view management - Geometrical or manufacturing properties ofcomposites entities (ply/cut piece/core features) may appear in CATDrawing documents inaccordance with the generative view styles. Highlight shell, seed point, seed curve, contourthickness, color or name may be specified by the administrator.



• NCF management - An NCF is a predefined material that assembles several layers ofcomposite materials. These materials will be used in ply as single material, but they will berecognized as several layers by commands that require it.

• Improvement in 'on the fly' composites information - Contextual information, such as number,sequence, material, or draping direction, is displayed locally when dragging the mouse abovecomposite elements in 3D or in the specifications tree.

• Ability to limit contour group - A limit for a group of contours can be defined from the geometryof a structural element (a stiffener or a stringer for instance). This limit feature is used as astart position to lay the first contour and to begin the staggering of the other ones. It enablesthe user to modify all plies where the same limit contour has been applied with the samestaggering value in one shot.




• Skin swapping: elevation mode - Using the skin swapping command, the contours of a ply/plies group/stacking/sequence may be projected to a destination surface in an elevationmode. This elevation mode projects the contours perpendicular to the origin surface, and thestacking order of the contours may be inverted.


• Enhancement in composites material management - It is now possible to specify a range ofnumerical values for each property of any material linked to the composite part. This rangebrings the flexibility required by the manufacturing process for these properties. The curedthickness, for instance, may vary due to the pressure applied during the molding process.

• Add material to take in consideration minimum tape length - The producibility and flattencommands have been enhanced in order to determine whether a ply or a cut-piece geometryfits into the given material roll-width.

• Associative unfold of composite part - The integration of Generative Shape Design (GSD)develop functions avoids manual interactions, especially in stacking flattening, and providesan associative flattening process, as well as an associative geometry transfer.

CATIA - Cast & Forged Part Optimizer 2 (CFO)

Wall thickness analysis: This enhancement enables designers to easily and quickly performlocal measurements of the overall thickness of a part, observe and analyze critical areas, and



optimize the design. Wall thickness analysis improves and accelerates the part and toolingdesign review process for manufacturability, especially for casting and injection moldingprocesses. It provides designers a way to ensure that the thickness meets the requirements ofthe manufacturing process in order to anticipate and fix potential manufacturing issues. Updatedfeatures include:

• Ray and Sphere computation modes

• Color coded thickness display to quickly and easily analyze critical areas. The color coding ofresults can be fully customized.

• On-the-fly display of thickness value

• Quick and easy analysis of critical areas

– Direct display of thin and thick areas

– Dynamic sectioning

• Intuitive design for non-experts in Thickness Analysis


CATIA - Shape Sculptor 2 (DSS)

• Boolean operations on meshes command - Enables associative Boolean operations betweenmeshes

• Mesh morphing command - Allows the user to deform a whole mesh or a sub-area of a meshto pass through given points and/or curves

• New terrain modeling toolbar - Provides access to 4 new commands that allow coverage ofthe Digital Terrain Modeling process:

– Mesh Enrichment

– Z Level Mesh

– Z Level Map

– Multi-section Slice

• Mesh edition enrichment - Enables the user to insert points in an existing mesh with maximumdistance criterion and projection direction management

• Z level mesh creation command - Enables the user to compute a mesh from Z-level scans orpolylines representing a terrain

• Z level map object creation command - Creates an associative Z-level map from a meshrepresenting a terrain, making it possible to:

– Create 2D or 3D scans in relation to minor and major planes

– Display altitude annotations

– Insert the resulting map in a drawing thanks to the Generative Drafting application

• Multi-section slice command - Enables the user to make models of underground strata bycutting meshed volumes with several interlayer meshed surfaces

CATIA - Imagine & Shape 2 (IMA)

• The general ergonomics of this product are improved in the following ways:

– Improved representation of exact dimensioning and handling of a z-buffer alongside a newplane representation.

– Better attraction representation with a lighter representation of weights to improvereadability.

– Enhanced compass move vector display - This option provides the user with distancenumber feedback on the last move action. Feedback can be displayed at the user'sconvenience, either near the compass, at the mouse cursor location, or unplugged).

– Improved smart selection that integrates multi-edition compliancy.

– Better readability of mesh using different colors at the user's convenience.

• Fusion of subdivisions - This enhancement enables the creation of one subdivision from twoinitial sub-divisions. This option provides three modes of fusion:

– Merge - Deforms both inputs to meet themselves

– Join - Adds matter to keep inputs unchanged



– Extrude - Adds more matter to allow incompatible meshes at junction

This enhancement increases productivity by allowing the user to chain several fusions verysimply and watch the real-time display of the result.

• Subdivision creation from curves - This enhancement adds two new primitive commands:

– Extruded profile: The user can directly draw the profile from the command. Modification ofthe profile is accomplished dynamically within the command.

– Revolve: The user can revolve the profile around an axis definition.

• Improvements of general algorithms

– Erase edge command behavior is aligned with other IMA commands as part of the StylingSurface toolbar. It is possible to designate multiple selections and to validate the commandwith a double click.

– The Sub-division fill command is improved to include automatic recognition of innersymmetries. This enhancement dramatically improves the quality of the result and lowersthe number of created faces.

– Dimensioning modification is now possible on a half-axis

CATIA - Generative Shape Design 2 (GSD)

• Fillet: User interface improvement of Blend Corner - The Blend Corner capability is improvedwith the ability to maintain the definition of blend corners when modifying an Edge Fillet. Thisenhancement will help:

– Extend the use of blend corners for fillet definition

– Prevent the selection of small edges or setback constraints

– Prevent the redefinition of former blend corners

• Blend: Automatic coupling for untwist - A new coupling mode, Avoid Twists, is added to theblend feature to avoid twisted geometry when possible.

• Canonical detection on Sweep - This option enables the user to activate the canonicaldetection for the sweep portion. This allows the user to use part of sweep geometry as inputfor other commands. As an example, a cylindrical sweep is now seen as a cylinder and can bere-used as such, thereby extending the usage of these geometries.

• Additional Knowledge Generative Shape Design evaluator - This new option extends thescope of Generative Shape Design feature creation via knowledge. New GSD featuresinclude:


– Boundary

– Fill

– Invert

– Transformations


• Adds preview button on Points&Planes Repetition command - This new preview mechanismon the Points&Planes Repetition command saves valuable time on the try-error process.

• Includes large Scale support - This is a new option for managing large scale numerical valuesin the geometric modeler tolerance. This is particularly useful for Power, Process & Petroleumindustry.

• Displays preview button on Planes Between command - This new preview mechanism on thePlanes Between command saves time on the try-error process.

• New behavior for drag & drop operation using reorder - This new behavior enables the user tomove a selected feature from one position to another in the product structure without using thecopy and paste operations that create temporary features. When the drag & drop operationusing Reorder is complete:






CATIA - Generative Shape Optimizer 2 (GSO)

The new AutoFillet option represents a significant process improvement, especially in the designfor the plastic or mold part. Previously, the process of filleting sharp edges to conform to existingfeatures was a repetitive and very time-consuming phase of the shape design process. This newcapability can automatically fillet the sharp edges of a shape in a single operation. Automaticfilleting is particularly helpful for fillet manufacturing preparation.

CATIA - FreeStyle Shaper 2 (FSS)

• Additional selection filter (trimmed/not trimmed) - This filter enables better productivity bymaking it possible to make multiple consecutive trap selections above geometry, withoutrequiring the user to reselect Trap Selection above geometry before each trap.

• Matching Constraint - This enhancement updated the matching constrain command to make itpossible to match 2 constrains on the same surface.

• Dress-Up - This option enables the user to define different appearances of elementscontained within a CATPart to improve the user's workflow and selection of geometry duringoperation. The different capabilities are listed below:

– Add display options for Apply Dress up for Colors, line, font, etc. on control points andsegmentation

– Switch Control Points on and off without needing to select geometry

– Dress-up scan and mesh capabilities

• Styling fillet - This option returns instant feedback from the Connect Checker Analysis featurewhen creating the fillet which is the deviation value for G0/G1/G2/G3 curvature for thoseoperations:

– Internal connections within ribbon (result fillet).

– Connections between ribbon (result fillet) and supports.

• Cutting plane analysis - This option enhances the user interface of the cutting planes analysiscommand. This command enables the user to compute intersections between surfaces toanalyze and planes (or sections).

• New 2D diagram integration - This new feature enables the user to display several analysissuch as cutting planes and distance analysis.

CATIA - Digitized Shape Editor 2 (DSE)

• Curve discretization command - This command enables curve discretization following differentcriteria that lead to scan/polyline results.

• Scan edition command - This command delivers several services for scan edition includingadd or move a point, divide the scan/polyline in two parts, merge two scans/polylines, orreorganize two scans / polylines along an axis.

• Mesh edition command - This command delivers several services for mesh edition includingadd or move a vertex, collapse vertex, edge or triangle, flip an edge, and so on.

• ASCII import with user attributes on points - This command enables the user to associatetechnical data color or to display a symbol for each digitized point. Feedback can be providedby displaying dynamic coordinates and technical data when the pointer is moved over a cloudof points.

• Thin triangles collapse - This is a new functionality provided by the mesh cleaner command.This function enables the user to process thin triangles by either deleting (so leave a hole) orcollapsing them.

• Extract and disassemble entities commands - The extract command enables the user tocreate a sub-cloud from the active (for example, visible) points of a cloud. For instance, in thecase of deviation analysis, the user is able to create a cloud by getting only the points that areout of tolerance. The disassemble command enables the user to split multi-component objectsinto unitary component objects.

• Generative drafting integration for scans/polylines and mesh sections - This option now treatsscans during view generation in exact mode and meshes in approximate mode. Section viewsand cuts can be computed on meshes.

CATIA - Realistic Shape Optimizer 2 (RSO) - Morphing by inspection data set - This newcommand optimizes the calculation of the field of vectors from the deviation analysis feature,



resulting in the creation of a new feature that can be edited. This ensures better optimization andincreases user productivity.

CATIA - Quick Surface Reconstruction 2 (QSR)

• Curve On Mesh - Two new capabilities that complement Curve On Mesh

– Capability to constrain curve extremities on existing support

– Manipulate tangents orientations and module at control points

• Characteristic lines by curvature criterion

– Improves quality by delivering a more efficient algorithm that produces smoother and lessnoisy results.

– Delivers a new command so the user can display a curvature cartography on mesh

Product Synthesis

CATIA - DMU Navigator 2 (DMN)

Enhancements for CATIA - DMU Navigator 2 are the same as for CATIA - DMU Navigator 1.

Equipment and Systems Engineering

CATIA - Electrical Library 2 (ELB)

• Allows synchronization of reference designator attributes for equipment between mechanicaland electrical systems applications

• Allows file base IXFElec when using ENOVIA VPM V5 - This enhancement enables the use ofimproved V5 Internal Protection after migration of electrical data containing protections fromV4 to V5.

• Defines user attributes on light protection with knowledge parameters (copy from reference toinstance) - This enhancement allows the user to add knowledge rules, parameters, and so onin a protection reference and instantiate it as a whole.

V4 to V5 migration provides the following benefits:

• File naming for migrated objects to use part number - This enhancement saves time for theuser by having the part number inside the file name of that part to allow for consistent namingof all parts.

• Cleaner of useless V5 files - This enhancement eliminates the need to check manually foruseless files in the target folder. With this new capability incorporated, Useless Files will beautomatically deleted during the Migration Process.

• Option to not migrate V4 shells as electrical - This new setting allows the user to control themigration of V4 shells as V5 shells or Non-Electrical Parts.

• Migrate V4 Protection as V5 light protection - This enhancement enables the use of improvedV5 Internal Protection after migration of electrical data containing protections from V4 to V5.

CATIA - Electrical Wire Routing 2 (EWR)

• Allows file base IXFElec when using ENOVIA VPM V5 - This enhancement will benefit theCustomer to enable using the more better V5 Internal Protection if he migrates Electrical Datafrom V4 to V5 containing Protections.

• Allows for wires to be routed to a complex connector assembly (connector shell and singleinsert connector) - This enhancement allows the customer to accurately model the realassembly and wire routing to termination using the EWR routing algorithm. This algorithmwill automatically manage wire routing to the specified device through the supported complexassemblies.

• Provides the following new knowledge attributes:

– The computed diameter on a bundle segment to allow a wire routing increase diameterwarning

– The from and to contact point name on a wire



CATIA - Electrical Harness Installation 2 (EHI)

• Define user attributes on light protection with knowledge parameters (copy from reference toinstance) - This enhancement allows the user to add knowledge rules, parameters, etc. in aprotection reference and instantiate it as a whole.

• Improves arrange segments in supports - This command is enhanced to make it more userfriendly, but the purpose of the command remains the same.

CATIA - Electrical Harness Flattening 2 (EHF) - This product is enhanced to increase customerproductivity with a new flattening rule that maintains the bundle tangency definition on junctionswith rigid parts.

CATIA - Systems Diagrams 2 (SDI) - This product is enhanced to:

• Allow users to query and open linked documents associated to an off sheet within an ENOVIAenvironment

• Allow users to insert specification breaks in a line route function

• Improve report management by allowing the user to define a knowledgeware expression aspart of a report template

• Allow users to attach geometric symbols to a line function in a diagram. Symbols are userdefined and can be used to represent flow arrows.

• Enhance Manage Document Link and Cross Document commands within an ENOVIAenvironment to list all possible linked work packages based on publication name. Thisenhancement also provides the option to open the selected work package.

CATIA - Structure Functional Design 2 (SFD)

• EndCut command - This enhancement supports the creation, edition, and deletion of end cuts.

• Integration of end cut for Beam in PPE - This enhancement enables the user to translate anSFD feature during the explode mode using the Piece Part process.

• Integration of end cut for Beam in Drafting - This enhancement enables the user to managedifferent graphic replacements for a beam pillar, and it works with the new EndCut command.This function is dependent on the Single Line and Double Line options.

• Stiffener fast preview - This command is enhanced to include an option to provide a differentpreview of a stiffener without providing the end result, thereby increasing productivity whendesigning a set of several stiffeners. This is particularly true when designing several shellstiffeners at once.

CATIA - Ship Structure Detail Design 2 (SDD)

• EndCut command - This enhancement supports the creation, edition, and deletion of end cuts.

• Integration of end cut for Beam in PPE - This enhancement enables the user to translate anSFD feature during the explode mode using the Piece Part process.

• Integration of end cut for Beam in Drafting - This enhancement enables the user to managedifferent graphic replacements for a beam pillar, and it works with the new EndCut command.This function is dependent on the Single Line and Double Line options.

• Stiffener fast preview - This command is enhanced to include an option to provide a differentpreview of a stiffener without providing the end result, thereby increasing productivity whendesigning a set of several stiffeners. This is particularly true when designing several shellstiffeners at once.

Analysis

CATIA - Generative Part Structural Analysis 2 (GPS)

Enhancements are the same as for Generative Part Structural Analysis 1.

CATIA - Generative Assembly Structural Analysis 2 (GAS)

• Assembly of frequency solution - This enhancement enables the user to assemble frequencycase solutions to provide comparison results on models for a frequency case. These resultsallow the engineering user to watch and interactively compare two simultaneous parallelfrequency analysis simulations on two different models in the same CATIA session in thesame window.



• Sticking option in contact - This enhancement enables the user to run an analysis case with asticking contact rather than a friction contact, thereby greatly decreasing the computation time.This is particularly helpful when the simulation case is using a static part, such as during thesimulation of a brake pad on a still car.

CATIA - FEM Surface 2 (FMS)

• OCTREE mesher: edge split option - This option allows the user to ensure that there will beat least two elements in the thickness for thin structures which require this meshing to getaccurate results

• Surface Mesher - This option enhances directional mesh by allowing for better quality surfacemesh. This enhancement is useful for the Body In White process where meshes will bealigned with the natural direction of the geometry.

• Element Quality Analysis: ABAQUS checks - This enhancement allows users to more easilycreate a mesh that compliant with ABAQUs solver requirements and to assess whether anexisting mesh is compliant with these requirements.

• OCTREE mesher: ABAQUS checks- This enhancement allows users to more easily createa mesh that compliant with ABAQUs solver requirements and to assess whether an existingmesh is compliant with these requirements.

• 1D Beam Mesher: Minimal mesh - This enhancement complements the minimal surfacemesher to provide a full offering for minimal structure meshing.

• Picking of coincident nodes - This enhancement allows the engineer to pick nodes that arecoincident (at the same location) thanks to a first in, first out (FIFO) stack magnifier system.This is useful for partners who have products that require some finite-element based pre-processing.

• Surface Mesher: Maintain panel size - This usability enhancement enables user interfacepanels to remains at the user's custom position with the same size and same pre-selectedcontent.

• Surface Mesher: Feature selection - This option allows the user to point at a feature insteadof Breps in the local specifications (naming) of the surface mesher. This capability is essentialwhen templates or automation with visual basic are targeted.

• Groups: Names including Mesh Part name. This feature enables automatic naming of thegroups in a mesh to be able to find and select them more easily. The user is also able tosearch (Ctrl-F) on a group of mesh.

CATIA - FEM Solid 2 (FMD)

• OCTREE mesher: edge split option - This option allows the user to ensure that there will be atleast 2 elements in the thickness for thin structures which require this meshing to get accurateresults

• Element Quality Analysis: ABAQUS checks - This enhancement allows users to more easilycreate a mesh that compliant with ABAQUs solver requirements and to assess whether anexisting mesh is compliant with these requirements.

• OCTREE mesher: ABAQUS checks- This enhancement allows users to more easily createa mesh that compliant with ABAQUs solver requirements and to assess whether an existingmesh is compliant with these requirements.

• Picking of coincident nodes - This enhancement allows the engineer to pick nodes that arecoincident (at the same location) thanks to a first in, first out (FIFO) stack magnifier system.This is useful for users who have products that require some finite-element based pre-processing.

• Groups: names including Mesh Part name. This feature enables automatic naming of thegroups in a mesh to be able to find and select them more easily. The user is also able tosearch (Ctrl-F) on a group of mesh.

CATIA - ELFINI Structural Analysis 2 (EST)

• XML mapping property based on element user number - This enhancement allows theengineer to link element numbers to user numbers in XML mapping processes in order toease map properties on structures elements

• Export positions without value - This enhancement makes it possible to identify the elementsfor which no element property has been applied. This option is particularly useful after usingXML properties mapping to identify the elements which do not receive a property.



• Isotropic and composite properties: thickness offset - This enhancement enables the user tooffset the 2D elements without moving the elements to allow:

– Accurate modeling of composites when the mesh is on the surface of the mold

– Accurate modeling of shells on compatible meshes with T-type structures

Machining

CATIA - Lathe Machining 2 (LMG)

Enhancements to Lathe Machining 2 are the same as for Lathe Machining 1.

CATIA - Prismatic Machining 2 (PMG)

Enhancements for Prismatic Machining 2 are the same as for Prismatic Machining 1.

CATIA - 3-Axis Surface Machining 2 (SMG)

• 3 to 5 converter - This enhancement provides the following:

– Extension of the 3To5x converter to all End Mill tools and the TSlotter

– Addition of a lead angle in the thru guide strategy mode

– Addition of a new strategy: Normal to drive surface

– Addition of an option in the ZLevel 3-Axis to optimize the tool path in undercut with theTSlotter tool

• Contour driven evolution

– Improves the guide definition: Silhouette is computed from selected faces.

– Adds the Reference option in the parallel contour mode with constant 3D strategy allowingthe user to drive the tool contact point or the tool end point.

– Adds the ability to create a guide contour either with two points or one point and onedirection.

– Improves faces selection with the select faces in a polygon trap tool which provides anoption to select the visible faces only.

• Zlevel: Output of circular interpolation and management of different overthickness - Thisenhancement reduces the programming time (creation of additional geometries) and themachining time through:

– Addition of an offset on tool path in the machining plane.

– Arc interpolation output when possible.

• Roughing: This enhancement provides the following:

– Extension of the start point behavior for Helical, Back&Forth and Offset from Part strategies

– Improved quality of the tool path for roughing by taking into account the tool holder in orderto avoid collision with the remaining material

– Improved security for engaging by allowing users to engage opened pockets from externalzones

– Simplifies the toolpath shape by avoiding the need to turn around the small holes of thestock by ignoring holes in the rough stock in the case of helical or back and forth tool pathstyle.

– Adds new approaches to the macro tab page to allow users to create circular engagementsfrom external zones, making it possible for users to choose to make a circular approachinstead of the automatic radial approach.

– Forces plans to be machined: When a face is selected as imposed plane or bottom plane,it is possible that the tool path does not machine above the selected face. The new functionwill force the tool path to be computed in a plane at a distance corresponding to themachining tolerance, and the tool path is translated at a lower level.

• Plunge milling - This enhancement adds the following:

– A new strategy mode: Guide by offset and preview of plunging points

– A new parameter for retract motion

– A circular movement at the bottom of each plunge



• Spiral milling operation - This enhancement improves programming by adding the following:

– New back and forth strategy mode

– Stay on bottom option for the spiral only strategy

– Access to the Face Mill Tool

– Clearance feedrate management

– Ramping up to a plane macro

• Toolpath free of collision - This enhancement allows the user to detect collisions between thetools or tool holders with the part for all milling operations (tool and tool holder). This improvesthe validation of tool paths during replay.

CATIA - Multi-axis Surface Machining 2 (MMG)

• All operations: Macro movements: Enable axis-to-axis, normal to surface option - Thisenhancement allows the user to define new macro motions in the macro tool box of multi-axismachining operations

• 5 Axis sweeping, contour driven, Isofac and curve following :

– Toolaxis axis driven through an auxiliary surface

– Lead angle in tool axis driven with guide curve

CATIA - Multi-slide Lathe Machining 2 (MLG)

Improvement of output based on counter-spindle - This enhancement provides improved outputthrough a counter spindle option that provides toolpath points or the coordinates of the toolpositions of the toolpath for machining operations defined on the counter spindle with respect tothe counter spindle part axis system. This output can be seen in both the toolpath replay and theNC output.

CATIA - Multi-pocket Machining 2 (MPG) - New operation for Multi Pocket Flank contouring

• Allows programming of a new operation: Multi-Pockets Flank Contouring added in MPGproduct. This operation is dedicated to the machining , with the flank of the tool of, partsshowing multiple pockets with an obvious view direction provides multipocket ability and MultiAxial and Multi radial strategies leading to reduce the programming time and the number ofoperations.

• New operation for Multi Pocket Flank contouring - This operation reduces programming timeand the number of operations by providing multipocket, multi axial, and multi radial strategiesfor machining parts using the flank of a tool.

CATIA - NC Machine Tool Simulation 2 (MSG)

• Mill turn simulation: machine instruction support for turrets - This enhancement enables theuser to define machine instruction activities on turrets, thus completing this functionality in mill-turn simulation.

• Milling: simulation of machines with interchangeable heads - This enhancement allows theuser to simulate milling machines with interchangeable heads, thus enabling the user to verifyNC tool paths for travel limits or collisions and modify if necessary.

• Milling: Machine configuration management within a machining operation - This enhancementprovides new options in the existing tool path modify dialog and the tool path trace so that theuser can force the selection of a particular machine configuration during machine simulation.This allows the user to associate and persist a machine configuration along with a particulartool path point from within the tool path modify dialog. This machine configuration will beapplied during machine simulation when the particular tool path point is to be reached.

• Milling: User Selectable machining axis system for work-piece mounting - This enhancementprovides the capability to mount the work-piece on a milling machine bed with respect to auser-selected machining axis system.

CATIA - NC Machine Tool Builder 2 (MBG)

Define milling machines with interchangeable heads - This enhancement exposes commandsto the user that enable the creation of milling heads within the context of a milling machine.The new milling head command will enable the user to create and define a new milling headin a product document without adding a new mechanism to the document. The user can add a



mechanism to this product using the existing new mechanism command. The add milling headcommand will enable him to add a previously created milling head in the context of a millingmachine.

CATIA - NC Manufacturing Review 2 (NCG)

• Helical interpolation output support for circular milling and thread milling operations - Thisenhancement allows a helical interpolation instruction to be generated in the output file forcircular milling and thread milling machining operations. This helical interpolation instructioncan be used by post-processor programs to generate ISO code containing specific helixinstructions. This capability provides the user with better tool path quality on the NC machinetool through the use of an optimized output statement in the program output file.

• NC Probing - 4 new operations to support probing in the context of the NC machine:

– Probing holes

– Probing ribs

– Probing corners

– Probing multi points

• Tool Path Editor: Feedrate Modification - This capability enables the user to edit the feedrateof a tool path globally or locally.

• Tool Path Editor for NCMill operation - This capability enables the user to perform the EditTool Path command on manufacturing data from V4 NCMILL models.

• Tool Path Editor - PPWord Management: add, edit, remove Merge PPWord at Program Level- This enhancement allows user to easily merge several PP instructions and edit PP wordsinside a tool path

• Video Mode - The enhancements to this mode include usability improvements to theCATProduct save. The command is enhanced to include reference frame, error handlingimprovements, and complex turning tool holder support. The use of video simulation is alsoimproved in the following ways:

– Product save to include reference frame

– Error handling improvements

– Open fixtures management

– Complex turning tool holder (concave)

– Save CATProduct at the same location of the process

– Progress task similar to the toolpath computation progress task

– Ability to disconnect non-cutting diameter management

• Display tool number, corrector ID, corrector number and radius number in the process table- This enhancement allows the user to see and directly modify in the process table the toolnumber and other values linked to the above parameters. It is no longer necessary to openeach editor panel of the machining operation.

• Feed support for transition move between machining operations (MO) and tool change - Thisenhancement allows users to set the feedrate locally for the transition path from machiningoperation A from machining operation B, or from a tool change activity. The user will beable to set this feedrate in the MO definition panel for machining operation B, thus ensuringconsistency between the transition feedrate displayed in the tool path replay panel, color ofthe transition path during replay and the transition feedrate output in APT file.

• New head change activity - This enhancement allows the user to create a new Head Changecommand in the auxiliary operations tool bar. By clicking on this command, a new headchange activity can be inserted in the PPR tree if an NC machine that has at least one headis assigned to the Part Operation. The user can now associate a different milling head to thesubsequent milling operations during machine simulation. The user can add a head changeactivity and select the milling head that is optimal for use for subsequent milling operations.

• Better Mill/Turn integration (Automatic generation of ROTABL for changeover from lathe tomill) - This enhancement enables the user to:

– Output a ROTABL/0 statement every time there is a change-over from a turning operationto a milling operation

– Output a TLAXIS statement in output every time there is a change-over from a millingoperation to a turning operation.



• Ordered list of Post Processor (PP) table - This enhancement improves the usability of the PPtable by listing the PP word tables in alpha-numeric order to allow the user to quickly navigatethe list of PP word tables. This enhancement also applies to the Controller Emulator and PostProcessor selections

• Improved Error Handling for Output generation - This enhancement improves the errormessage display for an NC output log file by displaying the number of errors and warningsand communicating this to the user along with the success or failure information.

• Capability to replace multiple machining operations with a single tool assembly - Thisenhancement allows the user the flexibility of replacing the tool assembly of one or moremachining operations using the Replace Tool contextual command.

CATIA - Prismatic Machining Preparation Assistant 2 (MPA)

Option to create features based on technological results only - This enhancement allows theuser to create machinable axial features that correspond to the existing technological results ofthe hole of the selected body.

Infrastructure

CATIA - ENOVIAVPM Supply Chain Engineering Exchange 2 (EWE)

This product enhancement provides the following:

• New option in reconciliator batch utility provides to not update assembly structure & geometry

• Extend extract batch command to enable the user to control the document name accordingexternal rules

• Improved reconciliator usability and ergonomics

• CATShape support

CATIA - Object Manager 2 (COM)

Enhancements are the same as for CATIA - Object Manager 1.

CATIA P3

Enhanced products

This release enhances numerous previously announced products.

Mechanical Design

CATIA - Aerospace Sheetmetal Design 3 (ASL)

• Joggle parameter management through a design table - This enhancement enables the userto drive all joggle parameters, including depth, runout, start radius, end radius, and clearancein a design table.

• Sheetmetal feature visualization in the DMU specification tree - This enhancement enablesthe user to correctly display the tree of a sheetmetal part in DMU. This ensures that allsheetmetal features will have:




CATIA - Composites Design 3 (CPD)

• XML File Generation - The export of the ply structure (geometry and stacking information)into an IGES or a DXF file allows external tools to lay or cut the plies efficiently during themanufacturing process.

• GVS for CATDrawing view management - Geometrical or manufacturing properties ofcomposites entities (ply/cut piece/core features) may appear in CATDrawing documents inaccordance with the generative view styles. Highlight shell, seed point, seed curve, contourthickness, color or name may be specified by the administrator.





• NCF management - An NCF is a predefined material that assembles several layers ofcomposite materials. These materials will be used in ply as single material, but they will berecognized as several layers by commands that require it.

• Improvement in 'on the fly' composites information - Contextual information, such as number,sequence, material, or draping direction, is displayed locally when dragging the mouse abovecomposite elements in 3D or in the specifications tree.

• Limit contour group - A limit for a group of contours can be defined from the geometry ofa structural element (a stiffener or a stringer for instance). This limit feature is used as astart position to lay the first contour and to begin the staggering of the other ones. It enablesthe user to modify all plies where the same limit contour has been applied with the samestaggering value in one shot.




• Skin swapping: elevation mode - Using the skin swapping command, the contours of a ply/plies group/stacking/sequence may be projected to a destination surface in an elevationmode. This elevation mode projects the contours perpendicular to the origin surface, and thestacking order of the contours may be inverted.


• Enhancement in composites material management - It is now possible to specify a range ofnumerical values for each property of any material linked to the composite part. This rangebrings the flexibility required by the manufacturing process for these properties. The curedthickness, for instance, may vary due to the pressure applied during the molding process.

• Add material to take in consideration minimum tape length - The producibility and flattencommands have been enhanced in order to determine whether a ply or a cut-piece geometryfits into the given material roll-width.

• Associative unfold of composite part - The integration of Generative Shape Design (GSD)develop functions avoids manual interactions, especially in stacking flattening, and providesan associative flattening process, as well as an associative geometry transfer.

Infrastructure

CATIA - Object Manager 3 (CO3)

Enhancements are the same as for CATIA - Object Manager 1.

Common products

These products are shared between ENOVIA VPLM V5 and CATIA V5 and can be orderedthrough either brand.



Enhanced common products


Real Time Rendering 2 (RTR)

• Users can more conveniently review and edit the variable that controls the 3D environment ina single panel and can choose reflection maps with a single click.

• A new command allows users to switch between pre-selected materials for comparingdifferent looks.

• Shadows have been made more realistic with the addition of multiple light sources and fullcompatibility with CgFX.

• Users can compute and store light maps offline, and then load them so a scene can berendered in real time without waiting on calculations to be made. More materials have beenadded to the materials library, such as CarPaint. Users can import external shaders foradditional effects.

Photo Studio 1 (PH1)

A new rendering toolbar is available that allows photo realistic images to be produced from 3Drepresentations seen on screen. The image computation takes into account material, sticker,light, and environments that have been defined in real time rendering.

Photo Studio 2 (PHS)

To improve the realism of computed images, Photo Studio 2 now includes the Architectural andDesign Shader. This provides realistic looks such as brushed metal, frosted glass, translucentmaterial, and so on. For ease of use, a list of presets for the many parameters enables users tochoose the closest effect for their material, but APIs are also provided to allow new renderingengines to define their own presets.

Product Synthesis

DMU Space Analysis 1 (SP1)

• Penetration management - Enables users to retrieve the two catalogs and theKnowledgeWare Rule Base file (CATProduct) that are defined as resources in the ProjectResource Management (PRM) project file. Users can then load the related design data andupdate the penetration information.

• Clash knowledgeRule CATProduct management within ENOVIA V5 VPM - Allows user toset the options panel to load clash rules from CATProduct files saved on the ENOVIA V5database as well as files saved locally. This saves time because it is not necessary to ensurethe files containing the clash rules are saved on local drive.

• Clash report contains workpackage name and product paths when connected to ENOVIA V5.

• Save sectioning result to VPM Navigator - Clashes can be searched directly from VPMNavigator.

• New exported sectioning model - Exporting a cross-section has been improved to save thesection outline as one polyline, instead of many connected lines. This saves in file size andprocessing time, as well as allowing user to select the section with one click of the mouse.

• Directly open a section into its editor - A cross-section can also be opened directly into a newVPM session, allowing the user to use the cross-section immediately, with the option to savethe section using the save command from the menu.

DMU Kinematics Simulator 2 (KIN)

The copy/paste function of a mechanism is enhanced to include the duplication of Dressup, thefull form of the model as opposed to the skeletal form, in addition to the joints and the associatedcommands and parameters. This provides a more complete simulation, showing the entirevolume of space through which the model moves.

Human Builder 2 (HBR)

Improvements have been made to help the user in manipulating the manikin. The user canchange the color of the referential axis to improve its visibility; the support polygon will change



from green to red when the manikin is moved in such a way that it becomes out of balance. Theuser can also manipulate the offsets that control the grasp position of the manikin's hand. Theseoffsets can also be saved and reloaded to save time in future work sessions.

Human Activity Analysis 2 (HAA)

Performance has been improved by increasing the number of joints (wrist flexion-extension andradial-ulnar deviation) that can be analyzed and providing the capability to define the load onmore segments (hands, forearm, shoulder and back) of the manikin. The biomechanical resultsare more clearly displayed using 3D rendering of the results by showing the results for a chosensegment, rather than all results for all segments every time.

MultiCAx Plug-ins

MultiCAx SolidWorks Plug-in (DSL)

• Support of SolidWorks 2007/2008

• SolidEdge V20

• Parasolid 18

CATIA WLS V5

Enhanced products

CATIA - User Companion for Mechanical Design (MDS)

Note: This product is available only via the CATIA - User Companion for Mechanical DesignConfiguration (MDC).

A V5.18 to V5.19 update course allows end-users to self-train on all the new capabilitiesdelivered with the Sketcher, Part Design, Assembly Design, Generative Shape Design (GS1)and Drafting workbenches and with the Mechanical Design Infrastructure. This update course isunique in the marketplace by virtue of its extensive coverage of the new release enhancementsas well as its synchronization with product availability.

CATIA - User Companion for Hybrid Design Product (HDS)

A V5.18 to V5.19 update course allows users to self-train on new capabilities delivered with theGenerative Shape Design (GSD) workbench. This update course is unique in the marketplace byvirtue of its extensive coverage of the new release enhancements as well as its synchronizationwith product availability.

CATIA - User Companion for Structural Analysis (SAS)

The CATIA User Companion for Structural Analysis is enriched to reflect the V5.19enhancements of CATIA - Generative Part Structural Analysis (GPS).

CATIA - User Companion for Sheetmetal (SMS)

A V5.18 to V5.19 update course allows users to self-train on new capabilities delivered with theGenerative Sheetmetal Design workbench. This update course is unique in the marketplace byvirtue of its extensive coverage of the new release enhancements as well as its synchronizationwith product availability.

User Companion for DMU (DNS)

The User Companion for DMU has been enriched to reflect V5.19 enhancements in the DMUSpace Analysis product.

CATIA - User Companion for Extended Structural Analysis (EAS)

The CATIA - User Companion for Extended Analysis has been enriched to reflect V5.19enhancements in assembly analysis, dynamic analysis and expert analysis provided with theElfini solver products.



Education support

Schedules and enrollment

Call the IBM PLM North America (PLM/NA) response line at 800-395-3339 for schedules andenrollments.

CATIA Higher Education and Training (HEAT) program

Under the HEAT program, two configurations are available for qualifying institutions to orderCATIA V5:

• CATIA - Academic Discover 2 Configuration (5671-DIC)

• CATIA - Educational HEAT EAR 2 Configuration (5671-EX2)

When new CATIA P1 or P2 products are announced, they are automatically added to the EX2configuration. When P1 or P2 products are withdrawn in a release, they are removed from theEX2 configuration. Any CATIA products which are export controlled and restricted from usein embargo/terrorist countries will not be added into the EX2 configuration. These products,formerly included in the ED2 configuration, are no longer available in the EX2 configuration:

• CATIA Composites Engineering 2 (CPE)

• CATIA Composites Design for Manufacturing 2 (CPM)

• CATIA Ship Structure Detail Design 2 (SDD)

• CATIA Digital Product Rights Manager 1 (RM1)

The CATIA Digital Product Rights Manager 1 (RM1) product is no longer available. If any of theother removed products are needed, special handling must be requested. For non-embargo/terrorist countries, the approval will be automatic. For embargo/terrorist countries, the ExportControl Office will need to be engaged. Contact your IBM representative for further information.

In this release, the 3 Axis Surface Machining (SMG) product is added to the DIC Configuration.

These configurations are for academic customers only. Their use is restricted to non-businesseducation and research activities. Models saved using these configurations are flagged sothat a message is displayed when such a model is attempted to be read with a non-academic(production) configuration.

To facilitate their use in the educational environment, a license for the CATIA User Companionfor Academic Discover 2 Configuration (DLC) is included at no charge under the EnterpriseOption model for each 5671-DIC seat ordered, and a license for the CATIA User Companion forAcademic Learn Configuration (LLC) is included at no charge for each 5671-EX2 seat ordered.

Contact Vijay Srinivasan ([email protected]) or 914-642-6587 for additional information andapprovals.

Withdrawn configurations

Effective September 23, 2008, the CATIA - Educational HEAT 2 Configuration (5671-ED2) configuration is withdrawn. Migration paths to the CATIA - Educational HEAT EAR 2Configuration (5671-EX2) are provided in this release.



Technical information

Specified operating environment

Hardware requirements

Summary of changes for V5.19

This release updates related operating system requirements.

Common hardware requirements

The following requirements are common to all operating systems supported by this release.Platform-specific requirements are specified in subsequent topics below.

• Required components and features

– Disk drive: An internal or external disk drive (minimum recommended size is 4 GB) isrequired to store program executables, program data, the user environment, and to supplypaging space. Installation of all CATIA V5 products requires 2.0 GB on Microsoft(R)Windows(R), 2.4 GB on AIX(R), 2.7 GB on HP-UX, and 2.3 GB on Solaris.

– Memory: 256 MB of RAM is the minimum recommended for all applications. 512 MB ofRAM is recommended for DMU applications on large assemblies and for the DigitizedShape Editor 2 (DSE) product. Requirements may be greater when large amounts of dataare used.

– Internal/external drives: A CD-ROM drive is required for program installation and for accessto the online documentation, which can optionally be downloaded to disk.

– Display: A graphics color display compatible with the selected platform-specific graphicsadapter. The minimum recommended size for usability reasons is 17 inches. Minimumresolution for Windows workstations is 1024 x 768 and 1280 x 1024 for UNIX(R)workstations. When selecting a graphics adapter, hardware texturing capability is stronglyrecommended when using CATIA V5 products that use texture mapping, in which case theamount of texture RAM has to be adequate for the number and complexity of textures to beused.

– Keyboard: A specific keyboard compatible with the selected installation locale may berequired for national language support.

– Pointing device: Three-button mouse. On Windows workstations, a two-button mousemay alternatively be used (the third button is emulated with a keyboard sequence). Thethree-button mouse is recommended for usability reasons. IntelliMouse (two buttons plus awheel instead of the third button) is an alternative to the three-button mouse on Windowsworkstations. The wheel acts as the middle button to allow additional manipulations, suchas panning and scrolling.

• Optional components and features: For CATIA P2 and P3, SpaceBall or SpaceMouse, inaddition to the standard mouse, can be used to perform graphic manipulations (zoom, pan,rotate). The required drivers are delivered with these devices. Support of these devices is alsoavailable with the DMU Navigator 1 and DMU Space Analysis 1 P1 products.

The robustness of the overall solution is dependent on the robustness of the operating systemand the hardware environment used. Windows XP and UNIX® hardware configurations certifiedby Dassault Systemes for running CATIA V5 products are published at

http://www.3ds.com/support/workstations-peripherals/

Although CATIA V5 products might run on configurations or with graphic adapters other thanthose specified for each of the platforms below, incidents specific to such configurations oradapters will not be accepted for support.

Hardware requirements for Microsoft Windows XP

• System unit: An Intel® Pentium(R) 4 or Xeon® based workstation running Microsoft WindowsXP Professional Edition SP2.

• Graphics adapter: A graphics adapter with a 3D OpenGL accelerator is required.




Note: Graphics performance on local transformations (panning, zooming, rotating model) willdepend on the selected graphics adapter. The graphics adapter should have the followingcapabilities:

– 24-bits, true color, double buffered visual

– 24-bits, Z-buffer

– Stencil buffer

– Minimum supported resolution: 1024 x 768; a resolution of 1280 x 1024 is recommended forusability reasons

• Network adapter: An active LAN adapter (Ethernet or Token Ring, installed and configured) isrequired for license key purposes.

Hardware requirements for Windows x86-64 64-bit

• System unit: An Intel Xeon EM64T or AMD Opteron 64-bit based workstation runningMicrosoft Windows XP Professional x64 Edition.

• Memory: 4 GB is the recommended minimum.

• Disk drive: 2.5 GB is the recommended minimum.

• Graphics adapter: A graphics adapter with a 3D OpenGL accelerator is required.

Note: Graphics performance on local transformations (panning, zooming, rotating model) willdepend on the selected graphics adapter. The graphics adapter should have the followingcapabilities:

– 24-bits, true color, double buffered visual

– 24-bits, Z-buffer

– Stencil buffer

– Minimum supported resolution: 1024 x 768; a resolution of 1280 x 1024 is recommended forusability reasons

• Network adapter: An active LAN adapter (Ethernet or Token Ring, installed and configured) isrequired for license key purposes.

Hardware requirements for AIX

• System unit -- Any RS/6000, based on the Power4, Power5, Power PC-970 processorfamilies, supported on AIX V5.3

• Graphics adapter: One of the following graphics adapters is required.

– GXT500P

– GXT550P

– GXT800P

– GXT800M

– GXT2000P

– GXT3000P

– GXT4000P

– GXT4500P

– GXT6000P

– GXT6500P

Hardware requirements for HP-UX

• System unit: Any B-Class, C-Class, or J-Class workstation based on the PA8000, PA8800,and PA8900 processor family and supported on HP-UX 11iv1.

• Graphics adapter: One of the following graphics adapters is required:

– Visualize-FXE

– Visualize-FX2

– Visualize-FX4



– Visualize-FX5

– Visualize-FX6

– Visualize-FX10

– Fire GL-UX

– Fire GL T2-128

– Fire GL X1

– Fire GL X3

Hardware requirements for Sun Solaris

• System unit: Any Ultra1, Ultra2, Ultra10, Ultra30, Ultra60, Sun Blade 100, Sun Blade 150,Sun Blade 1000, Sun Blade 1500, Sun Blade 1500+ (1.5 GHz), Sun Blade 2000, or SunBlade2500 workstation based on the UltraSPARC processor supported on Solaris 10.

• Graphics adapter: One of the following graphics adapters is required.

– Creator3D

– Creator3D Series III

– Elite 3D (U10-440MHz only for U10 workstations)

– Elite 3D Lite

– Expert 3D

– XVR-500

– XVR-600

– XVR-1000

– XVR-1200

Hardware requirements for WLS

There are no specific requirements beyond those for CATIA V5.

Software requirements

Summary of changes for V5.19

• 32-bit requires Orbix 3.3 for all platforms.

• Minimum run-time support for IBM AIX running on Power4 or Power5 processors for both 32-and 64-bit is provided by AIX 5.3 ML03.

• Minimum run-time support for HP-UX Run-time is HP-UX 11i December, 2004 (on 32-bit only).

• Minimum run-time support on Sun Solaris SPARC is Solaris 10 SPARC. The minimum levelrequired is Solaris 10 HW 03/05 with 119280-06 CDE 1.6 - Runtime library patch for Solaris10.

• For interoperability with CATIA V4 CDM and ENOVIA VPLM ENOVIAVPM on AIX, Windows,HP-UX, or Solaris:

– The required level of a DB2® UDB database server is Version 8.2.4.

– The required level of an Oracle database server is Oracle 10gR2.

– The required level of HP-UX 11i is -UX 11i.v1 (11.11) December, 2004

– The required level of Sun Solaris (SPARC) is Solaris 10 HW 03/05

– The required level of AIX is AIX V5.3 with ML03 applied as the minimum level

• The required level for document browsers in a UNIX environment is Mozilla 1.7 for AIX, HP-UX, and Solaris and FireFox 2.0 for SUN Solaris SPARC.

• The required level for document browsers in a Microsoft Windows environment is MicrosoftInternet Explorer 7.0 or Mozilla 1.7.

• The required level for JRE is 1.5.0 for all operating systems.



Common software requirements

CATIA V5 runs on selected levels of:

• Microsoft Windows XP Professional SP2 and XP Professional x64

• Microsoft Windows Vista x86 and Vista x64

• AIX

• Hewlett Packard HP-UX 11iv1

• Sun Solaris SPARC 10

Refer to the Program Directory or contact your IBM Support Center for appropriate correctiveservice to apply to the software described below.

V5.19 prerequisites Orbix 3.3 on 32-bit operating system.

Software requirements for Microsoft Windows XP Professional Edition SP2

• Windows XP delivers an implementation of OpenGL libraries. These libraries may have to bemodified to accommodate the selected graphics adapter when installing the graphics adapterand its associated drivers. For recommendations related to driver levels based on certifiedconfigurations, visit

http://www.3ds.com/support/workstations-peripherals/• A localized version of the operating system may be required when the selected installation

locale differs from Latin 1.• The following patches are required to run V5.19:

– MS06-75 - Vulnerability in Windows could allow elevation of privilege

http://www.microsoft.com/technet/security/bulletin/MS06-075.mspx– MSI Installer 3.1 - Windows Installer 3.1 v2 (3.1.4000.2435) available at

http://support.microsoft.com/kb/893803

For CATIA V5 32-bit on Windows Vista x32 Enterprise Edition,

with the following components:

• The following patches are required to run V5.19:

– KB940069 - Fix for indexing services problem, refer to Microsoft Article KB940069

http://support.microsoft.com/kb940069– KB940105 - Required for virtual address space usage in Microsoft Windows, refer to

Microsoft Article KB940105

http://support.microsoft.com/kb940105

For CATIA V5 64-bit on Windows XP Professional x64 Edition

• A Microsoft implementation of OpenGL libraries as delivered with Microsoft Windows XPProfessional x64 Edition. These libraries may have to be modified to accommodate theselected graphics adapter when installing the graphics adapter and its associated drivers. Forrecommendations related to driver levels based on certified configurations, visit

http://www.3ds.com/support/workstations-peripherals/• Installation of 32-bit V5 applications:

– Although V5 products are 32-bit applications, they will be able to allocate up to 4GB ofMemory when running on this operating system.

Note: Memory consumption for a 64-bit process is completely different than for a 32-bitprocess. In this situation, it is not pertinent to compare the Virtual Bytes counter of Perfmonbetween a 32- and 64-bit process. Although the 4G limitation of global address spacemake this counter important when tracking a 32-bit process, virtual address space for 64-bitprocess can go up to 8 TB.


http://www.microsoft.com/technet/security/bulletin/MS06-075.mspx

http://support.microsoft.com/kb/893803






For CATIA V5 32-bit on Windows XP Professional x64 Edition

• A Microsoft implementation of OpenGL libraries as delivered with Microsoft Windows XPProfessional x64 Edition. These libraries may have to be modified to accommodate theselected graphics adapter when installing the graphics adapter and its associated drivers. Forrecommendations related to driver levels based on certified configurations, visit

http://www.3ds.com/support/workstations-peripherals/• The following patches are required to run V5.19:

– KB903648 - When using macro and VBScript features, V5 may crash when accessingmore than 2GB of address space, a Microsoft patch corrects this problem, refer to MicrosoftArticle KB90368

http://support.microsoft.com/default.aspx?scid=kb;en-us;903648– KB911021 - Required for applications allowing more than 2GB of address space, please

contact your Microsoft Support Representative.

For CATIA V5 on Windows Vista x64 Enterprise Edition, with the

following components:

• The following patches are required to run V5.19:

– KB940069 - Fix for indexing services problem, refer to Microsoft Article KB940069

http://support.microsoft.com/kb940069– KB940105 - Required for virtual address space usage in Microsoft Windows, refer to

Microsoft Article KB940105


Software requirements for IBM AIX 32- and 64-bit platforms

AIX 5.3 ML03 (using 64-bit kernel), with the following components:

• XL C/C++ Enterprise Edition Run-time Environment at a minimum level of V7.0.0

• XL Fortran Enterprise Edition for AIX Run-time, at a minimum level of V9.1.0

– November 2004 XL Fortran for AIX V9.1 Runtime PTF, available at

http://www.ibm.com/support/docview.wss?rs=0&uid=swg24008377– OpenGL 1.3, as delivered on AIX CDs

Or

AIX 5.3 TL04-SP01 (using 64-bit kernel) with following components, which are required tosupport WebSphere® Application Server 6.1, WebSphere Portal Server, or IBM IntellistationP185:

• XL C/C++ Enterprise Edition Run-time Environment, at a minimum level of V8.0.0

– January 2006 IBM C++ Runtime Environment Component for AIX, available at

http://www.ibm.com/support/docview.wss?rs=0&uid=swg24011532• XL Fortran Enterprise Edition for AIX Run-time, at a minimum level of V10.1.0 available at

http://www.ibm.com/support/docview.wss?rs=0&uid=swg24010669• OpenGL 1.3, as delivered on AIX CDs

• Firmware version AT061_061 or later for support of nodelocked licensing only

Software requirements for HP-UX

HP-UX Version HP-UX 11iv1 (11.11) (December, 2004), with the following components at theminimum levels indicated:

• HP-UX Technical Computing OE (TCOE) Component December 2004

• Hardware Enablement Patches for HP-UX 11iv1, December 2004

• Gold Application Patches for HP-UX 11iv1, December 2004


http://support.microsoft.com/default.aspx?scid=kb;en-us;903648



http://www.ibm.com/support/docview.wss?rs=0&uid=swg24008377





• Gold Base Patches for HP-UX 11iv1, December 2004

HP-UX Version HP-UX 11iv1 (11.11) (June, 2007), with the following components at theminimum levels indicated:

• HP-UX Technical Computing OE (TCOE) Component December 2006

• Hardware Enablement Patches for HP-UX 11iv1, December 2006

• Gold Application Patches for HP-UX 11iv1, June 2007

• Gold Base Patches for HP-UX 11iv1, June 2007

Note: Important notice on HP-UX support - V5.19 will be the last release to support HP-UX

Software requirements for Sun Solaris

Sun Solaris 10 H/W 03/05, with 119280-06 CDE 1.6 - Runtime patch for Solaris 10.

Requirements for interoperability with ENOVIA VPLM products

• CATIA V5 and ENOVIA VPLM V5 must be at the same release, service pack, and hot fix levelfor proper interoperability.

• CATIA V5 and ENOVIA VPLM interoperability is supported between various CATIA V5release and ENOVIA VPLM PTF levels. Refer to the most recent ENOVIA VPLM PTFprogram directory for the current prerequisite and recommended interoperability PTFs.

Product-specific software requirements for CATIA P2

• CATIA - V4 Integration 2 (V4I) requires, on the CATIA V5 client, for interoperability with CATIAV4 CDM and ENOVIA VPLM ENOVIAVPM:

– If the database server is DB2, then on AIX, Microsoft Windows, HP-UX, or Solaris use DB2UDB V8.2.4.

– If the database server is Oracle, then on AIX, Microsoft Windows, HP-UX or Solaris, useOracle 10gR2.

Note: Contact your IBM or Oracle representative for support and planning information on DB2UDB or Oracle.

Note: CATIA V4 CDM and ENOVIA VPLM ENOVIA VPM interoperability is available throughCATIA - V4 Integration 2 (V4I) for the following products:

– CATIA - Assembly Design 2 (ASD)

– CATIA - DMU Kinematics Simulator 2 (KIN)

• Interoperability of CATIA V5 on the supported Microsoft Windows platforms with ENOVIAVPLM ENOVIAVPM through ENOVIA 3d com requires, on the client side, either (dependingwhether the database server is a DB2 or an Oracle server):

– DB2 Universal Databasetm V8.2.4 Client for Windows– Oracle Client Version 10gR2 for Windows

• Math Kernel Libraries - When on an Intel(R) architecture in a Windows environment, theperformance of the following products can be improved through the use of Intel Math KernelLibraries at level 6.0:

– CATIA - Generative Part Structural Analysis 1 (GP1)

– CATIA - Generative Part Structural Analysis 2 (GPS)

– CATIA - Generative Assembly Structural Analysis 2 (GAS)

– CATIA - ELFINI Structural Analysis 2 (EST)

– CATIA - Tolerance Analysis of Deformable Assembly 3 (TAA)

– CATIA - Product Engineering Optimizer 2 (PEO)

– CATIA - Generative Dynamic Response Analysis 2 (GDY)



Specific software requirements for CATIA WLS V5

Access to the companion desktop - Companion desktop access is accomplished using the

same browser requirements as CATIA V5 (see Access to product information). The Javatm

plug-in (JRE at a minimum level of 1.5) is required to visualize the different types of simulations(Show Me, Discover It, Try It, and the Quiz) and to allow for automatic model loading fromCATIA.

The supported level of JRE 1.5 can be downloaded from

http://java.sun.com/products/archive/index.html

Additionally:

• Some WLS products may provide learning resources using the Portable Document Format(PDF). To view these documents, Adobe® Acrobat Reader, at minimum level 5.0, must beinstalled as a plug-in on the browser. The latest level of the Reader can be downloaded from

http://www.adobe.com/

Although access to WLS might work on other HTML browsers, incidents specific to browsersother than the products mentioned above are not eligible for support.

• An installation of CATIA V5.19, though not a strict requirement, is recommended to practicethe provided exercises automatically loaded by the User Companion Desktop in the activeCATIA session.

• For the CATIA User Companion for V4 Mechanical Design product, an installation ofCATIA V4 at level R2.1 or above is recommended to practice the provided exercisesautomatically loaded by the User Companion Desktop in the active CATIA session. Forsoftware requirements, visit


WLS license management - Licenses can be managed either using standard CATIA V5licensing or by using the J2EE Companion Server. For standard licensing, see Prerequisites forthe license management environment. Requirements for the J2EE Companion Server are:

• Application server setup - The application server used must support Servlet 2.4 and JSP2.0 and must be able to handle the Companion Server WAR or EAR files. These files arecopied during installation if the application server option was selected during the installationprocedure. The server setup operation depends on the application server used and must bedone by the system administrator.

• Companion application setup for license serving - The application server machine must beable to access WLS licenses, and licenses must be available to this server machine. For theEnterprise Option, the total number of licenses must be equal to the maximum number ofstudents that will be connected at the same time to the application server.

Companion Development Studio - The Companion Development Studio is designed tocommunicate with other applications. The Companion Development Studio Product requires:

• Microsoft Windows XP Professional Edition SP2

• JRE at a minimum level of 1.5. The supported version of JRE 1.5 can be downloaded from


The following are not requirements, but are recommended to take full advantage of the product.

• Access to one of the following browsers is mandatory for the preview of screens:

– Microsoft Internet Explorer 6.0 (Microsoft VM version number 3158, at a minimum)

– Mozilla 1.7 for AIX, HP-UX, and Solaris

Note: Access to the screens developed with the Companion Development Studio might beaccessible directly through the Companion Desktop. The Companion Desktop has beena license key managed product available with any WLS entry configuration since V5.9.Installation of any WLS standard configuration will provide the Companion Desktop licensekey and will allow access to customer-developed screens and skillets.


http://www.adobe.com/





• Access to Microsoft PowerPoint and Microsoft Word (version Office 2000) through OLEautomation.

Note: Although different versions of Microsoft PowerPoint and Microsoft Word may work,incidents specific to other than the versions specified above are not eligible for support.

Access to product information

Product information is delivered with the product CDs in HTML format. An HTML browser isrequired to access this documentation. Online documentation may be installed and used only inthe same supported operating environments as CATIA V5.

• In a UNIX environment

For AIX, HP-UX, or Solaris - Mozilla 1.7FireFox for SUN Solaris SPARC

• In a Microsoft Windows environment, one of the following browsers is required:

Microsoft Internet Explorer at a minimum level of 7.0Mozilla 1.7 with the Java plug-in installed

In addition to a Java-enabled Web browser, the Java Plug-in at level 1.5 to search onlinedocumentation:

• For AIX, Java Runtime Environment version Java 1.5.0 SR3 can be downloaded from

http://www.ibm.com/developerworks/java/jdk/aix/service.html• For HP-UX, Java Runtime Environment 5.0.0.1 can be downloaded from

http://www.hp.com/go/java• For Sun Solaris, Java Runtime Environment version 5 update 7 can be downloaded from

http://java.sun.com/products/archive/index.html• For Microsoft Windows, Java plug-in version 5 update 7 can be downloaded from


Although access to the online documentation might work on other HTML browsers, incidentsspecific to browsers other than those specified are not eligible for support.

Note: Improvements in HTML searching and printing capabilities eliminate the need to duplicateproduct information in the Portable Document Format (PDF) format. PDF CDs are therefore nolonger included in the CATIA V5 softcopy collection kit.

Prerequisites for the license management environment

Microsoft Windows workstations must have an active LAN card (Ethernet or token ring) andTCP/IP installed and properly configured, even in the case of nodelock keys, though for nodelockthere is no need to have the workstations connected to the network. No additional licensemanagement software is required when accessing nodelock license keys.

IBM License Use Management (LUM) is required to serve concurrent license keys across anetwork. A LUM configuration file (i4ls.ini) is required on CATIA V5 clients to access concurrentlicense keys from these servers. Server and Nodelock license management mechanisms areavailable for CATIA V5 P1, P2, and P3 on all supported operating environments.

The minimum IBM LUM level is V4.6.8.3.

The latest release of IBM LUM, together with any applicable patches, can be downloaded at nocharge from

http://www.ibm.com/software/lum

For details about LUM license management for CATIA V5, refer to Use limitation applies section.

http://www.ibm.com/developerworks/java/jdk/aix/service.html

http://www.hp.com/go/java



http://www.ibm.com/software/lum



Macro replay capabilities

CATIA V5 has built-in macro record and replay capabilities. For UNIX, the interpreter is VB Script3.0 from Mainsoft. Its components are included in CATIA V5 as shared libraries.

For Windows, the interpreter is either:

• VB Script at a minimum level of V5.0. It is delivered with Microsoft Internet Explorer. VB Scriptlibraries at level 5.0.0.3715 are delivered with Microsoft Internet Explorer 5.0 or at later levelswith later versions of Internet Explorer. Use of VB Script is recommended for developingMicrosoft Windows- and UNIX-compatible macros.

• Microsoft VisualBasic for Applications (VBA) at a minimum level of 6.0. VBA is delivered andinstalled by default with CATIA V5.

Printer and plotter support

• UNIX - CATIA V5 supports the following plotter/printer languages:

– CGM-ISO, ATA, CALS

– Hewlett Packard HP-GL/2-RTL and HP-GL or IBM-GL subsets

– OCE Graphics GPR50: VDF plotting routines

– PostScript®

• Windows - Printers and plotters are supported through the vendor's drivers for the targetedprinter or plotter relative to the targeted version of the operating system. Contact the printer orplotter vendor for requirements and support.

Batch monitoring using WebSphere(R) MQ (WMQ) (formerly MQSeries(R))

Using WMQ communication tools, some batch operations can be launched remotely. Whenimplemented at the batch level, this optional feature requires WMQ at minimum level 6.0. Foravailability of client and server components on supported platforms, visit

http://www.ibm.com/software/mqseries/messaging/

WMQ Client is required on systems where the transaction is initiated. WMQ Server is requiredon systems where remote batches are executed.

CATIA V5 general packaging principles

• A CATIA P1 product or a CATIA P1 configuration requires or must include (in the case ofconfigurations) CATIA - Object Manager 1 (CO1). P1 products can be used on P2 or P3,and in such cases, they operate with CATIA - Object Manager 2 (COM) or CATIA - ObjectManager 3 (CO3), respectively.

• A CATIA P2 product or a CATIA P2 configuration requires, or must include (in the case ofconfigurations), CATIA - Object Manager 2 (COM). P2 products can be used on P3, and insuch cases, they operate with CATIA - Object Manager 3 (CO3).

• CATIA - COM 1 to 2 Extension (C12) allows all P2 products to be added on to P1configurations. The C12 product effectively upgrades the P1 infrastructure (CO1) to the P2infrastructure (COM). The C12 product does not change the underlying P1 configuration;included products remain P1. The C12 product can be used as a shareable (C12) or add-on(C12) product.

• A CATIA P3 product or a CATIA P3 configuration requires or must include (in the case ofconfigurations) CATIA - Object Manager 3 (CO3). P1, P2, and P3 shareable and add-onproducts are available to P3 configurations as shareable or add-on products.

• License keys for CATIA configurations are acquired and released for the total configuration.

• The functions within a configuration cannot be shared.

• A configuration is required for each CATIA V5 seat.

• CATIA V5 add-on (AOP) and sharable products may require prerequisite products that arenot included in a standard purchased configuration. When a prerequisite product is notincluded in the selected standard configuration, both the AOP and its prerequisite productsmust be purchased and included as AOPs within a custom configuration. Prerequisites forshareable products can be satisfied by a standard configuration, by an AOP within a customconfiguration, or by a shareable product.

http://www.ibm.com/software/mqseries/messaging/



• CATIA - V4 Integration 2 (V4I) is included in all P2 and P3 configurations, and CATIA - V4Integration 1 (V41) is included in all P1 configurations.

Planning information

Packaging

CATIA V5 packaging

The deliverables associated with each of the three platforms (P1, P2, and P3) are shipped inseparate box kits. The Program Directory is shipped as a CD.

Platform 1 box kit (LK3T-5100)

Ships with all orders for P1 configurations.

• Thirteen CDs (LCD4-4077)

– AIX

– HP

– Solaris

– Windows

These CDs include P1 products and configurations and the national language productintegrated information (PII).

• Program Directory CD (LCD4-3619)

• LUM CD (LCD4-7882)

• Publications

– English softcopy publications collection kit (SK3T-4124)

– IBM informal documents

-- Memorandum to Current® Users (GI11-4403)

-- Registration Memorandum (GI11-4404)

P2 box kit (LK3T-4132)

Ships with all orders for P2 configurations, CATIA - COM 1 to 2 Extension Product (C12) orCATIA - COM 1 to 2 Extension AOP (C12).

• Seventeen CDs (LCD4-3756)

– AIX

– HP

– Solaris

– Windows

These CDs include P1 and P2 products and configurations and national language PII.



• Publications



-- Memorandum to Current Users (GI11-4403)




P3 box kit (LK3T-7778)

Ships with all orders for P3 configurations.

• Eighteen CDs (LCD4-5339)

– AIX

– HP

– Solaris

– Windows

These CDs include P1, P2, and P3 products and configurations and national language PII.



• Publications



-- Memorandum to Current Users (GI11-4403)


The following table describes the contents of the platform box kits in terms of the installableconfigurations and products each contains.

Installable InstallableBox kit configurations products P3 P2 and P3 P1, P2, and P3P2 P2 P1 and P2P1 P1 P1

Shipping package

In addition to the box kits, the shipping package contains:

• Licensed Program Specification (GH52-1328)

• With an order for the CADAM Drafting for V5 (CCD) add-on product, the three CCD productCDs (LCD4-4076)

• With an order for one or more MultiCAx products, the 7 MultiCAx product CDs (LCD4-7456)

Note: The CATIA API CDs are shipped with CAA RADE as LCD4-7422. Refer to SoftwareAnnouncement 208-220, dated September 23, 2008. for information on ordering CAA RADE.

CATIA V5 national language packaging

Product integrated information (PII) is included on the worldwide distribution media in the box kitsfor each operating system at general availability.

National language versions (NLVs) of the softcopy collection kits in French, German, Italian, andJapanese at the current release level will be available after general availability.

CATIA V5 Softcopy Collection Kit - French (SK3T-4125)CATIA V5 Softcopy Collection Kit - German (SK3T-4126)CATIA V5 Softcopy Collection Kit - Japanese (SK3T-4127)CATIA V5 Softcopy Collection Kit - Italian (SK3T-0575)




CATIA WLS V5 packaging

CATIA user companions for UNIX can be ordered together under a single form number, andall user companions for Windows under another. The lists below show which companions areincluded in the platform deliverables. The companions are renamed in this release.

• CATIA WLS V5 User Companions for UNIX (LCD4-7846, 12 CDs)

– User Companion for CATIA Mechanical Design for UNIX

– User Companion for CATIA Hybrid Design for UNIX

– User Companion for CATIA Structural Analysis for UNIX

– User Companion for CATIA Extended Structural Analysis for UNIX

– User Companion for CATIA V4 Mechanical Design for UNIX

– User Companion for CATIA for Sheetmetal for UNIX

• CATIA WLS V5 User Companions for Windows (LCD4-7847, eight CDs)

– User Companion for CATIA Mechanical Design for Windows

– User Companion for CATIA Hybrid Design for Windows

– User Companion for CATIA Structural Analysis for Windows

– User Companion for CATIA Extended Structural Analysis for Windows

– User Companion for CATIA Sheetmetal for Windows

Common WLS product packaging

The DMU WLS products common to ENOVIA VPLM and CATIA are packaged as the UserCompanion for DMU - UNIX and Windows (LCD4-7848, five CDs).

The Companion Development Studio Product is LCD4-5559 (one CD).

Informal documents for WLS

• CATIA WLS Licensed Program Specifications (GH52-1328)

• CATIA WLS Registration Memorandum (GI11-4404)

• CATIA WLS Memorandum to Current Licensees (GI11-4403)

National language versions (NLVs) of WLS products

National language versions of WLS products in French, German, and Japanese at the currentrelease level will be available after general availability. The standard ordering process applies.

• CATIA WLS V5 User Companions - UNIX (nine CDs) contains:

– User Companion for CATIA Mechanical Design for UNIX

– User Companion for CATIA Hybrid Design for UNIX

– User Companion for CATIA Structural Analysis for UNIX

– User Companion for CATIA for Sheetmetal for UNIX

The form numbers are:

– LCD4-7857 (French)

– LCD4-7851 (German)

– LCD4-7854 (Japanese)

• CATIA WLS V5 User Companions - Windows (seven CDs) contains:

– User Companion for CATIA Mechanical Design for Windows

– User Companion for CATIA Hybrid Design for Windows

– User Companion for CATIA Structural Analysis for Windows

– User Companion for CATIA Sheetmetal for Windows



The form numbers are:

– LCD4-7858 (French)

– LCD4-7852 (German)

– LCD4-7855 (Japanese)

• User Companion for DMU - UNIX and Windows (five CDs) contains:

– User Companion for DMU - UNIX

– User Companion for DMU - Windows

Security, auditability, and control

The announced programs use the security and auditability features of the operating systemssoftware. The customer is responsible for evaluation, selection, and implementation of securityfeatures, administrative procedures, and appropriate controls in application systems andcommunication facilities.

Ordering information

Current licensees

Current licensees will receive this update from IBM Software Delivery and Fulfillmentautomatically.

Should you require further assistance, contact your country IBM representative.

Shipment of this release of CATIA V5 is scheduled to be completed by October 17, 2008;shipment of this release of CATIA WLS V5 is scheduled to be completed by November 7, 2008.

New licensees

Orders for new licenses will be accepted now. For new licensees,

shipment will begin on the planned availability date.

An order for CATIA V5 basic licensed programs consists of:

• A licensed standard configuration program order (5671-XXX)

• A licensed custom configuration (5671-XXX) with add-on products (5673-XXX)

• Optional licensed shareable product program order (5671-XXX)

• One system program order (SPO) (5628-CV5)

An order for CATIA WLS V5 basic licensed programs consists of:

• A licensed shareable product program order 5671-XXX

• A licensed standard configuration - enterprise option (5672-XXX)

• One system program order (SPO) (5628-WL5)

The 5671-XXX and 5673-XXX orders are required for billing and asset registration. The 5628-CV5 and 5628-WL5 orders are required to ship machine-readable materials and publications.

CATIA V5 and CATIA WLS V5 are available only on CD-ROM.



Release summary

There are no new products being announced in this release.

Product ordering

The ShopPLM configurator must be used to submit all PLM CBS orders. For information on theShopPLM configurator, visit

https://steamboat.boulder.ibm.com/webapp/shopplm/landing.wss

Ordering information for new products is contained in this section.

The following tier levels apply for all configurations and products in this announcement:

• Recurring license

ALC or RLC User 1-9ALC or RLC User 10-25ALC or RLC User 26+

• Variable term license

YLC User 1-9YLC User 10-25YLC User 26+

Product ordering

To order a basic license for a standard configuration or shareable product, specify:

• The configuration/shareable product program number

• The appropriate charge option

• The platform and quantity

Note: The configurator will automatically add to your order:

• The appropriate billing feature numbers

• The appropriate SPO information

To order a basic license for a custom configuration, specify:

• The standard configuration program feature number

• The appropriate charge option

• The platform and quantity

Note: The configurator will automatically add to your order:

• The AOP indicator codes and 5693 AOP PIDs

• The appropriate billing feature numbers

• The appropriate SPO information

https://steamboat.boulder.ibm.com/webapp/shopplm/landing.wss



Orderable supplies

Only configurations ship supplies because configurations are prerequisites for all shareableproducts and add-on products. (An exception is those few products that have standalonesupplies.) For each configuration ordered, the ShopPLM configurator will add the 5628-CV5system program order (SPO) and assign an entitlement entity number for the orderable supply.

5628-CV5 Orderable DistributionSupply ID Language Medium Description S013N12 All* CD-ROM Automotive BIW Design 3 Cf (5671-AB3)S013N28 All* CD-ROM Advanced Design Migration 2 Cf (5671-ADD)S013N1G All* CD-ROM Designer & Adv Machinst 2 Cf (5671-AM2)S013N17 All* CD-ROM COM1to2 Extension Prd (5671-C12)S013N23 All* CD-ROM Composites Des 3 Cf (5671-CD3)S013N1K All* CD-ROM MultiCAx - AD Plug-in Product(5671-DAL)S013N1W All* CD-ROM MULTICAX SE Plug-in Prd (5671-DEL)S013N19 All* CD-ROM MultiCAx - IGES Plug-in Product(5671-DGL)S013N2B All* CD-ROM Systems Diagrams 2 Cf P2 (5671-DI2)S013N29 All* CD-ROM Academic Discover Cfg (5671-DIC)S013N2D All* CD-ROM CATIA V5 Drawing Produc 2 CF(5671-DP2)S013N26 All* CD-ROM Core & Cavity Design 2 Cf(5671-CV2)S013N1T All* CD-ROM Drafting 1 Cf (5671-DR1)S013N2N All* CD-ROM MULTICAx - SolidWrks Plug Pr (5671-DSL)S013N2M All* CD-ROM MULTICAx - STEP Plug-In Pr (5671-DTL)S013N1M All* CD-ROM Elect.System Functional Def 2 Cf (5671-EF2)S013N2H All* CD-ROM CATIA V5 ElecWire Harnes2 Cf(5671-EI2)S013N1D All* CD-ROM Elect.Signal Routing 2 Cf(5671-ER2)S01566Z All* CD-ROM Educational HEAT EAR 2 Cf (5671-EX2)S013N1L All* CD-ROM FreeStyle Shaper 2 Cf (5671-FS2)S013N1C All* CD-ROM Hybrid Design 2 Cf (5671-HD2)S013N22 All* CD-ROM MultiCAx-ID PLG-IN Intrgr DirI/f (5671-IDL)S013N20 All* CD-ROM Business Proc Knowldge Def 3 Cf (5671-KD3)S013N27 All* CD-ROM Mechanical Design 1 Cf (5671-MD1)S013N0X All* CD-ROM Mechanical Design 2 Cf (5671-MD2)S013N2C All* CD-ROM Mechanical Engineering 1 Cf (5671-ME1)S013N1S All* CD-ROM Mechanical Engineering 2 Cf(5671-ME2)S013N1F All* CD-ROM Mold & Die Machnst 2 Cf (5671-MO2)S013N1P All* CD-ROM Mechanism Simulation 2 C (5671-MS2)S013N25 All* CD-ROM MultiCAx - PD Plug-in Product (5671-PDL)S013N1B All* CD-ROM Plant Layout 2 Cf (5671-PL2)S013N11 All* CD-ROM Prismatic Machinists 2 Cf (5671-PM2)S013N2F All* CD-ROM CATIA V5 Reverse Eng 2 CfS013N1R All* CD-ROM Styled Mechanical Design 1 Cf (5671-YM1)S013N1N All* CD-ROM Preparation Machinist 2 Cf(5671-RM2)S013N14 All* CD-ROM Preparation Prism Mach 2 Cf(5671-RP2)S013N1X All* CD-ROM Structural Analysis 2 Cf(5671-SA2)S013N15 All* CD-ROM SBD V4 Migration 2 Cf(5671-SBD)S013N21 All* CD-ROM Sheetmetal Design 2 Cf (5671-SD2) S013N2J All* CD-ROM Aerospace Sheetmtl Dsgn 3 Cf(5671-SL3) S013N10 All* CD-ROM FreeStyle Optimizer 2 Cf (5671-SO2)S013N2P All* CD-ROM CATIA V5 Tol Ana Def Asm3(5671-TA3) CfS013N2R All* CD-ROM MultiCAx - UD Plug-In Pr (5671-UDL)S013N24 All* CD-ROM Extended Mechanical Design 1 Cf (5671-XM1)S013N0Z All* CD-ROM Extended Mechanical Design 2 Cf (5671-XM2)S013N2G All* CD-ROM CATIA V5 Styled MechDsg 2 Cf (5671-YM2)S013N1H All* CD-ROM COM 1 to 2 Cf (5673-C12)S013N13 All* CD-ROM CADAM Drafting for V5 AOP (5673-CCD) *English, French, German, Italian, Japanese

CATIA WLS V5 system program order

Only configurations ship supplies because configurations are prerequisites for all shareableproducts and add-on products. (An exception is those few products that have standalonesupplies.) For each configuration ordered, the ShopPLM configurator will add the 5628-WL5system program order (SPO) and assign an entitlement entity number for the orderable supply.



5628-WL5 Orderable DistributionSupply ID Language Medium Description

S013S15 All* CD-ROM All-in-One Marketing WLS Cf (5671-ALC) S013S19 All* CD-ROM WLS UComp MDsg Cf WIN (5671-MDC)S013S14 All* CD-ROM WLS UComp MDsg Cf UNIX (5671-MDC)S013S2K All* CD-ROM WLS UComp MDsg Cf EO WIN (5672-MDC)S013S29 All* CD-ROM WLS UComp MDsg Cf EO UNIX (5672-MDC)S013S17 All* CD-ROM WLS Comp Dev Studio Win (5671-CDS) *English, French, German, Italian, Japanese

Withdrawn CATIA V5 Educational HEAT configurations

Effective September 23, 2008, CATIA - Educational HEAT 2 Configuration (ED2) is withdrawnfrom marketing:

These configurations are replaced by the new configurations announced in this release.

Effective September 23, 2008, the 5671-ED2 configuration is withdrawn from marketing.

Remove the following orderable supplies from the 5628-CV5 system program order (SPO):

5628-CV5Orderablesupply ID Supply description S013N1J CATIA Educ HEAT 2 Cf (5671-ED2)

Customization options

Contact IBM Customer Support Operations for any special handling, such as suppression ofmedia or expediting an order.

One English softcopy collection kit (SK3T-4124) is automatically included in all shipments.National Language Versions (NLVs) of the softcopy publications in French, German, Italian, andJapanese will be available after general availability at no charge. Customers of record can orderone additional kit per license by ordering:

5671-NL2 Optional Softcopy Collection Kit

Select the appropriate orderable supply ID in ShopPLM to choose the language.

By using the following form numbers, additional softcopy collection kits can be ordered throughthe IBM Publication Ordering System:

• CATIA V5 Softcopy Collection Kit - English (SK3T-4124)

• CATIA V5 Softcopy Collection Kit - French (SK3T-4125)

• CATIA V5 Softcopy Collection Kit - German (SK3T-4126)

• CATIA V5 Softcopy Collection Kit - Japanese (SK3T-4127)

• CATIA V5 Softcopy Collection Kit - Italian (SK3T-0575)

http://www.elink.ibmlink.ibm.com/public/applications/publications/ cgibin/pbi.cgi

There are no softcopy publications for CATIA WLS V5.

Subsequent updates (technical newsletters or revisions between releases) to the publicationsshipped with the product will be distributed to the user of record for as long as a license for thissoftware remains in effect. A separate publication order or subscription is not needed.

http://www.elink.ibmlink.ibm.com/public/applications/publications/cgibin/pbi.cgi



Terms and conditions

Agreement

IBM Customer Agreement

Designated machine

Not required

Variable charges apply

No

Location license applies

No

Use limitation applies

Yes, as implemented by the license management model described.

The license management model

CATIA V5 license management model CATIA controls the number of concurrent users ofa CATIA configuration or product, according to the number of license keys acquired for theconfiguration or product.

CATIA V5 delivers identical license management mechanisms on UNIX and Windowsenvironments, based on IBM License Use Management (LUM). The following licensemanagement principles apply:

• A CATIA V5 configuration (standard or custom) will require a license key. License keys forCATIA V5 configurations are acquired and released for the total configuration. The productswithin a configuration cannot be shared.

• Each CATIA V5 shareable product will require a license key, in addition to one for theprerequisite configuration and any prerequisite product, if applicable.

• In all cases, CATIA configuration license keys are acquired at the beginning of the processand are released at its termination.

• CATIA V5 add-on (AOP) and shareable products may require license keys for prerequisiteproducts that are not already included in a standard configuration. Prerequisites forshareable products can be satisfied by a standard configuration, by an AOP within a customconfiguration, or by a shareable product. However, because all add-on products are definedwithin one custom license key, any AOP prerequisites must be satisfied by either a standardconfiguration or by other AOPs purchased and defined within the same custom configuration.

CATIA V5 can be used in three license management modes: nodelock, with concurrent usage oflicense keys on a network, or concurrent offline license management.

Nodelock usage: The use of a local display is mandatory for CATIA V5 usage in nodelockmode. There is no limit to the number of CATIA V5 processes launched for a given license key(configuration or product). For instance, a user can launch the following simultaneous processes:

• A V5 interactive session

• A V5 process executed through an OLE container application

• Replay of macros recorded from captured sequences of V5 user interactions

In the nodelock mode of operation, only one CATIA license key per configuration and shareableproduct can be registered per machine, and only one CATIA user can run at a time on thatmachine. If multiple license keys per configuration or shareable product, or multiple users on asingle machine, are required, refer to the following text.



Concurrent usage: A user on one machine on one display uses one license key perconfiguration or shareable product used, regardless of the number of processes. If the displaychanges, then an additional license key is taken for the corresponding process.

Dynamic license management: CATIA shareable product license keys can be acquired andreleased during the session. (The ability to acquire and release licenses is not available forconfigurations.) Shareable license keys acquired at the beginning of the session cannot bereleased before the end of the session; only license keys dynamically granted upon user requestduring the session can be released during the session.

Concurrent offline license management: A concurrent license key control technique isavailable via the LUM server.

It gives CATIA, ENOVIA DMU, DELMIA, and RADE applications running on a Windows laptopthe ability to disconnect from the license key server for a specific period of time. During thecheckout period, the server license key is unavailable for use by another concurrent user.This feature is designed to add additional flexibility to a user's work environment. It is offeredto accommodate short-term travel needs and collaboration while away from a fixed officeenvironment or server connection. All ICA terms and conditions, including cross-border licensingterms, are unchanged, and users will check-out and check-in license keys at their home server,where rules and procedures are controlled by LUM.

Note to users of the following ENOVIA SmarTeam-branded CATIA integration products:

• SmarTeam - CATIA Team PDM Configuration (TDM)

• SmarTeam - CATIA Integration Product (CAI)

• SmarTeam - CATIA Web Team PDM Configuration (TDW)

These ENOVIA SmarTeam products do not support dynamic or concurrent offline licensemanagement. Licenses for these products are acquired dynamically when the function is invokedfrom CATIA and may not be released until the CATIA session is ended.

Educational allowance available

The standard educational allowance does not apply to CATIA V5 and CATIA WLS V5 products.However, these products are available in several configurations under the CATIA HigherEducation Academic Training (HEAT) program. Refer to Education support section for details.

Volume orders

Contact your IBM representative.

Warranty applies

Yes

Licensed program materials availability

Restricted Materials of IBM: None Non-Restricted Source Materials: None Object Code Only (OCO): All



Program Services

Program Services offer a method of reporting code-related problems for CATIA V5 and WLSlicensed software products. Program Services are available electronically using the problemsubmission process at the PLM Technical Support Web site at:

http://www.ibm.com/software/applications/plm/support/

Note: In order to use this facility, you must use an IBM ID which has associated to it thelicensed IBM customer number under which the product was purchased. If you have not yetobtained an IBM ID, visit

http://www.ibm.com/account/profile/

If you have not yet associated the licensed IBM customer number to your IBM ID, you will beprompted to do so when accessing the problem submission facility.

When using Program Services, the problem report is submitted via the PLM Technical SupportWeb site; all subsequent communications will be via email. The response time for these problemreports, regardless of the severity, will be within two business days. All communications must bein English.

Not all options of the Product Lifecycle Management (PLM) technical support e-services areavailable in all countries.

If the problem reported is not determined to be a code-related problem, the customer will beinformed that work will continue on it provided the customer has ECSR (Electronic CustomerSupport Representative) enhanced support (reference PRPQ 5799-C88) with the CATIA supportfeature. Enhanced support for WLS is included in the base product's feature code; no separateenhanced support is required.

For additional information about the enhanced support contract and other available PLM servicesofferings visit


Click on the "ECSR enhanced support details" link or contact your PLM marketing representativeor authorized IBM Business Partner for more information.

Preventive Service is delivered through the next release of CATIA V5 products. The new releasealso includes corrections to problems, depending on the time of their submission and theirseverity.

During the Program Services period, Corrective Service for CATIA V5 releases is deliveredthrough service packs on a regular basis. A service pack includes corrections for BlockingProblems in production systems reported on this release and all corrections available for allcomponents at the time it is built. Service packs are provided at the same time for all platformscurrently supported. Each service pack supersedes the previous one and may be installed ontop of the released level or on top of a previous service pack. (The exception is WLS productswhere Corrective Service is provided in the next release of the product. No maintenance for WLSproducts is provided in the service packs.)

Customers may request a correction via a service pack for Blocking Problems. A BlockingProblem is defined as:

• A problem that stops production: The customer is currently using the level for which a fix isrequested in a production environment.

• A problem that prevents migration: The customer must provide the migration plan.

• A problem that halts testing of a given level: A fix will allow customer to continue the testing.

• Installation problem: A problem that prevents the customer from installing or using the product.

• Regression: Problems reported as regressions may be due to an operation that was beingperformed erroneously or created incorrect data with a previous release and the currentrelease no longer permits these operations. Therefore, each problem reported as a regressionmust be evaluated. True regressions will be handled as Severity 1 problems.


http://www.ibm.com/account/profile/




Note: Customers experiencing problems with IBM License Use Management (LUM) productswhen used with CATIA V5 products may report these problems through PLM product support.Note this only applies when the LUM product is being used in conjunction with a CATIA V5product and the CATIA product is within its support period. LUM products are not included in theenhanced support offering; LUM problems will receive the Program Services level of support andmust be submitted via the Problem Reporting process at the PLM Technical Support Web site at


Program Services will be provided for this release of CATIA and WLS V5 products (V5R19) untilJune 3, 2011. After that date, should it be necessary for customers who are up-to-date on theirAnnual License Charge (ALC) payments to extend support, a support extension will be availablefor an additional fee.

This extension is for one year only, with no possibility of renewal, and will be limited to supportof critical situations found in production running on an announced, supported environment andsubject to the availability and maintainability of Operating Systems, databases, middlewareand hardware (clients and servers) at the time the critical situation is reported. Critical situationmeans a Severity 1 defect that is blocking production and has no workable alternative to unblockproduction.

In order to insure uninterrupted support, support extension requests should be submitted byDecember 3, 2010 through the customer's marketing team or Business Partner.

This extension of support will not constitute an alternative to the customer's migration to thelatest release or version of the installed products and therefore the customer is obligated to havea documented and viable migration plan to the latest release or version in order to obtain anextension of support.

For a list of all currently supported releases of CATIA, ENOVIA VPLM, and ENOVIA SmarTeamproducts visit


At the bottom of the page, select "End of support dates" under Plan, Product life cycle.

IBM operational support services - SupportLine

No

Other support

PLM Support Centers

Prices

For prices, contact your IBM representative.

Use level charge: Charges for this program are based on usage levels. When a customerupgrades to a higher level of usage, a usage upgrade charge will apply, equal to the differencebetween the charge for the current level of usage and the higher level of usage.

Trademarks

Windows and Microsoft are registered trademarks of Microsoft Corporation in the United States,other countries, or both.

Tracer and DB2 Universal Database are trademarks of IBM Corporation in the United States,other countries, or both.

Learning Solutions, IBM, AIX, DB2, WebSphere and Current are registered trademarks of IBMCorporation in the United States, other countries, or both.

UNIX is a registered trademark of The Open Group in the United States and other countries.





Intel and Xeon are registered trademarks of Intel Corporation or its subsidiaries in the UnitedStates and other countries.

Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in the UnitedStates, other countries, or both.

Adobe and PostScript are registered trademarks of Adobe Systems Incorporated in the UnitedStates, and/or other countries.

Other company, product, and service names may be trademarks or service marks of others.

Terms of use

IBM products and services which are announced and available in your country can be orderedunder the applicable standard agreements, terms, conditions, and prices in effect at the time.IBM reserves the right to modify or withdraw this announcement at any time without notice. Thisannouncement is provided for your information only. Additional terms of use are located at:

http://www.ibm.com/legal/us/en/

For the most current information regarding IBM products, consult your IBM representative orreseller, or visit the IBM worldwide contacts page

http://www.ibm.com/planetwide/us/

Corrections

(Corrected on December 17, 2008)The Product number, Description, Software requirements, Packaging, and Ordering informationsections are revised.

http://www.ibm.com/legal/us/en/

http://www.ibm.com/planetwide/us/

Documents

CATIA V5.19 broadens virtual design for real success