Upload
others
View
8
Download
2
Embed Size (px)
Citation preview
Zhengzhou Azeus Machinery Co., Ltd
Email:[email protected] Skype:lixiangfang311
Tel: 0086-371-6599 6917 Fax: 0086-371-6590 3401 MB: 0086-13938450532
Catalogue of floating fish food extruder
Dry Type
Model AZSG60-B AZSG70-B AZSG80-B AZSG90-B
Capacity 120-120KG/H 180-250KG/H 300-350KG/H 400-450KG/H
Power 15+0.4+0.4KW 18.5+0.4+0.4KW 22/27+0.4+1.5KW 30/37+0.4+1.5KW
Screw dia Φ60mm Φ70mm Φ80mm Φ90mm
Model AZSG120-B AZSG135-B AZSG160-B AZSG200-B
Capacity 500-700KG/H 800-1000KG/H 1.2-1.5T/H 1.8-2.0T/H
Power 55+0.4+2.2KW 75+0.4+2.2KW 90+1.5+2.2KW 132+1.5+3.0KW
Screw dia Φ120mm Φ135mm Φ155mm Φ195mm
Wet Type
Model AZSS60-B AZSS70-B AZSS80-B AZSG90-B
Capacity 180-200KG/H 250-300KG/H 350-400KG/H 400-450KG/H
Power 15+0.4+0.75+0.37KW 18.5+0.75+0.75+1.5KW22/30+0.75+0.75+1.5KW 37+1.1+1.1+2.2KW
Screw dia Φ60mm Φ70mm Φ80mm Φ90mm
Model AZSS120-B AZSS135-B AZSS160-B AZSS200-B
Capacity 800-900KG/H 1-1.2T/H 0.8-2.0T/H 2.5-4T/H
Power 55+1.1+1.1+2.2KW 75+1.5+2.2+2.2KW 90+2.2+2.2+3.5KW 132+2.2+3.0+4.5KW
Screw dia Φ120mm Φ135mm Φ155mm Φ195mm
Zhengzhou Azeus Machinery Co., Ltd
Email:[email protected] Skype:lixiangfang311
Tel: 0086-371-6599 6917 Fax: 0086-371-6590 3401 MB: 0086-13938450532
IntroductionThis is a series of “Dry” (“Wet”) feed extruders, the new generation, suitable for processing of floating and
Demersal fish feed, pet food, Ornamental feed etc.
Working principle:
Moisture of raw material: 16%-22%
Starch content for floating feed: 20%-30%
Pellet diameter is φ0.6-16mm
It’s significantly different between pet food and traditional feeding method. The machine is based on the raw
material of corn, soybean, fish powder, bone powder etc. Then the material can be expanded to pellet feed
which is different shaped, unique taste and rich nutrition, suitable for dog, cat, fish, bird, rabbit fox etc.
Application:
The machine fits for professional farmers, middle & small sized feed factory and research institutions.
Instructions of operation:
1. Start the machine → 2. Add a little water and start the cutter → 3. Add wet material; start the feeder When the
puffed Position in front becomes heat →4. Adjust the cutter speed