HYDRAULIC PUMPS

BC 101 / BC 102BG 101 / BG 102B 31B51

Since 1967 date of its foundation in Piracicaba by Mr. Adelmo Marrucci, Marrucci Industries has grown and consolidated as a reference on Brazilian market Supplying products for hydraulic segment. Nowadays the company is composed by a Hydraulic Division and also by a Foundry Division responsible to supply castings for several segments of the market.Marrucci industries management is always based on sustainability and it is one of the few companies to hold these certi�cates (ISO 9001) Guaranteed manufacturing of products in compliance with the determined standards, promoting customer satisfaction; (ISO 14001) Total compliance with development standards with no harm to the environment, including awareness in our collaborator’s attitudes; (OHSAS 18001) Excellence in safety management and occupational health of all of those who are involved with the company which demonstrate its commitment to guarantee the best practices, safety, health and motivate the development of our collaborators.

ABOUT US

01

W W W . M A R R U C C I . C O M . B R

02

BC 101 / BC 102 SERIESCOMBINATION PUMP VALVES DISPLACEMENT – 5.10 AND 6.38 IN³ / REV.

03

W W W . M A R R U C C I . C O M . B R 04

FEATURES

APPLICATIONS

CHARACTERISTICS

OPTIONAL SPECIAL FEATURE

RELIEF VALVE PROTECTION IN ALL SPOOL POSITIONSPULL OUT CABLE DEVICE AIR SHIFT SPOOL CONTROL 2 OR 3 LINES INSTALLATIONS PRESSURE RATED AT 2500 PSIREMOTE OR DIRECT MOUNT PRESSURE BALANCED THRUST PLATES DURABLE HIGH-STRENGTHS CAST IRON BODYVOLUMETRIC EFFICIENCIES TO 95%

BODY MATERIAL = CAST IRON CHARGE PUMP OPTION = NOT APPLIED CONFIGURATION = SINGLE FLUID TYPE = STANDARD HYDRAULIC FLUID / PHOSPHATE ESTERFLUID TEMPERATURE (F) = FROM -4 TO 80 FMAXIMUM OPERATING PRESSURE (PSI) = 3000 PSIMAXIMUM SPEED (RPM) = 2400 RPMFLUID VISCOSITY (SUS) = 50 TO 7500 SUSMOUNTING OPTION = SAE PORT CONNECTION = NPT PORT CONNECTION TYPE = FLANGE / STRAIGHT THREADEDPORTING LOCATION = REAR PORTS PUMP TECHNOLOGY = SPUR GEARDISPLACEMENT PUMP TYPE = FIXED ROTATION = CLOCKWISE / COUNTER CLOCKWISE / TWO SHAFTSSHAFT TYPE = SAE

MATERIAL HANDLING TURF CAREAGRICULTURALCONSTRUCTION EQUIPMENTS FORESTRY

DUAL PRESSURE VALVE

2- line Installation

05

One line to the cylinder, one line to the reservoir.For intermittent operation only.

Oil recirculates internally Oil is routed throughwork port to raise

the cylinder.

Oil �ows from the cylinder through the relief

valve to return to tank.

Spool in Neutral: Raise Position: Lower Position:

3- line InstallationOne line to the cylinder, two lines to the reservoir.For continuous or intermittent operation.

Oil circulates through the pump and returns to tank.

Oil is routed throughwork port to raise

the cylinder.

Oil �ows from the cylinder, through the bottom

port and returns to tank.

Spool in Neutral: Raise Position: Lower Position:

W W W . M A R R U C C I . C O M . B R 06

07

BC 101MAIN DIMENSIONS

SIDE VIEW FRONT VIEW

PERSPECTIVE“A” VIEW

4956573548975056489562227365

CODE G.W CODE CODECODE CODEVolumetric Displacement (INCH*)

2 ½”2”2”

2 ½”2 ½”2 ½”2 ½”

6.385.105.106.386.386.386.38

CableAir Shift

CableAir Shift

CableCableCable

395.8 (15.58”)383.1 (15.58”)383.1 (15.58”)395.8 (15.58”)395.8 (15.58”)395.8 (15.58”)395.8 (15.58”)

82.63 (3.75”)69.93 (2.75”)69.93 (2.75”)82.63 (3.25”)82.63 (3.25”)82.63 (3.25”)82.63 (3.75”)

Simple PressureSimple PressureSimple PressureSimple PressureSimple PressureSimple Pressure

Dual Pressure

W W W . M A R R U C C I . C O M . B R 08

BC 102

SIDE VIEW FRONT VIEW

PERSPECTIVE“A” VIEW

MAIN DIMENSIONS

492749574960505550777364736673677368

CODE ROTATION G.W CONTROL Relief ValveVolumetric Displacement (INCH*)

C-ClockwiseC-Clockwise

ClockwiseClockwise

C-ClockwiseC-Clockwise

ClockwiseC-ClockwiseC-Clockwise

6.386.386.386.386.386.386.386.386.38

2 ½”2 ½”2 ½”2 ½”2 ½”2 ½”2 ½”2 ½”2 ½”

CableCableCable

Air ShiltAir Shilt

CableCable

Air ShiltCable

Simple PressureSimple PressureSimple PressureSimple PressureSimple Pressure

Dual PressureDual PressureDual PressureDual Pressure

BG 101 / BG 102 SERIESCOMBINATION PUMP VALVESDISPLACEMENT – 3.94 IN³ / REV.

09

W W W . M A R R U C C I . C O M . B R 10

FEATURES

APPLICATIONS

CHARACTERISTICS

RELIEF VALVE PROTECTION IN ALL SPOOL POSITIONSPULL OUT CABLE DEVICE 2 OR 3 LINES INSTALLATIONS PRESSURE RATED AT 2500 PSIREMOTE OR DIRECT MOUNT PRESSURE BALANCED THRUST PLATES DURABLE HIGH-STRENGTHS CAST IRON BODYVOLUMETRIC EFFICIENCIES TO 95%

BODY MATERIAL = CAST IRON CHARGE PUMP OPTION = NOT APPLIED CONFIGURATION = SINGLE FLUID TYPE = STANDARD HYDRAULIC FLUID / PHOSPHATE ESTERFLUID TEMPERATURE (F) = FROM -4 TO 80 FMAXIMUM OPERATING PRESSURE (PSI) = 3000 PSIMAXIMUM SPEED (RPM) = 2400 RPMFLUID VISCOSITY (SUS) = 50 TO 7500 SUSMOUNTING OPTION = SAE PORT CONNECTION = NPT PORT CONNECTION TYPE = FLANGE / STRAIGHT THREADEDPORTING LOCATION = REAR PORTS PUMP TECHNOLOGY = SPUR GEARDISPLACEMENT PUMP TYPE = FIXED ROTATION = CLOCKWISE / COUNTER CLOCKWISE / TWO SHAFTSSHAFT TYPE = SAE

MATERIAL HANDLING TURF CAREAGRICULTURALCONSTRUCTION EQUIPMENTS FORESTRY

11

12

BHM BC 101MAIN DIMENSIONS

CODE CONTROLVolumetric Displacement (INCH*)

5080 3.9 CABLE

SIDE VIEW FRONT VIEW

PERSPECTIVE“A” VIEW

W W W . M A R R U C C I . C O M . B R 13

BHM BC 102MAIN DIMENSIONS

ROTATION CONTROLVolumetric Displacement (INCH*)

ClockwiseC-Clockwise

CODE

50625072

3.93.9

CABLECABLE

SIDE VIEW FRONT VIEW

PERSPECTIVE“A” VIEW

PUMPS, MOTORS AND FLOW DIVIDERS B31DISPLACEMENT – 0.99 TO 3.94 IN³ / REV.

14

W W W . M A R R U C C I . C O M . B R 15

FEATURES

APPLICATIONS

CHARACTERISTICS

PRESSURE RATED AT 3000 PSIREMOTE OR DIRECT MOUNT PRESSURE BALANCED THRUST PLATES DURABLE HIGH-STRENGTHS CAST IRON BODYVOLUMETRIC EFFICIENCIES TO 95%CONTAMINATION TOLERANCE

BODY MATERIAL = CAST IRON CHARGE PUMP OPTION = NOT APPLIED CONFIGURATION = SINGLE / TANDEM / MULTIPLEFLUID TYPE = STANDARD HYDRAULIC FLUID / PHOSPHATE ESTERFLUID TEMPERATURE (F) = FROM -4 TO 80 FMAXIMUM OPERATING PRESSURE (PSI) = 3000 PSIMAXIMUM SPEED (RPM) = 2400 RPMFLUID VISCOSITY (SUS) = 50 TO 7500 SUSMOUNTING OPTION = SAE / ISO / DIN PORT CONNECTION = SAE / ISO NPT / BSPP / ODTPORT CONNECTION TYPE = FLANGE / STRAIGHT THREADEDPORTING LOCATION = SIDE PORTS / REAR PORTS PUMP TECHNOLOGY = SPUR GEARDISPLACEMENT PUMP TYPE = FIXED ROTATION = CLOCKWISE / COUNTER CLOCKWISE / BI-ROTATIONAL SHAFT TYPE = SAE / ISO / DIN

MATERIAL HANDLING TURF CAREAGRICULTURALCONSTRUCTION EQUIPMENTS FORESTRY

16

W W W . M A R R U C C I . C O M . B R 17

PUMPS, MOTORS AND FLOW DIVIDERS B51 DISPLACEMENT – 1.28 TO 6.38 IN³ / REV.

18

W W W . M A R R U C C I . C O M . B R 19

FEATURES

APPLICATIONS

CHARACTERISTICS

PRESSURE RATED AT 3000 PSIREMOTE OR DIRECT MOUNT PRESSURE BALANCED THRUST PLATES DURABLE HIGH-STRENGTHS CAST IRON BODYVOLUMETRIC EFFICIENCIES TO 95%CONTAMINATION TOLERANCE

BODY MATERIAL = CAST IRON CHARGE PUMP OPTION = NOT APPLIED CONFIGURATION = SINGLE / TANDEM / MULTIPLEFLUID TYPE = STANDARD HYDRAULIC FLUID / PHOSPHATE ESTERFLUID TEMPERATURE (F) = FROM -4 TO 80 FMAXIMUM OPERATING PRESSURE (PSI) = 3000 PSIMAXIMUM SPEED (RPM) = 2400 RPMFLUID VISCOSITY (SUS) = 50 TO 7500 SUSMOUNTING OPTION = SAE / ISO / DIN PORT CONNECTION = SAE / ISO NPT / BSPP / ODTPORT CONNECTION TYPE = FLANGE / STRAIGHT THREADEDPORTING LOCATION = SIDE PORTS / REAR PORTS PUMP TECHNOLOGY = SPUR GEARDISPLACEMENT PUMP TYPE = FIXED ROTATION = CLOCKWISE / COUNTER CLOCKWISE / BI-ROTATIONAL SHAFT TYPE = SAE / ISO / DIN

MATERIAL HANDLING TURF CAREAGRICULTURALCONSTRUCTION EQUIPMENTS FORESTRY

20

W W W . M A R R U C C I . C O M . B R

Matriz Piracicaba:

Rodovia Piracicaba - Tietê, km 01Caixa Postal - 273 - Piracicaba/SP

Brasil - CEP: 13401-620

Fone: 19 2105.4700Fax: 19 2105.4701

Filial Rio Grande do Sul:

Rua Abramo João Mazzochi, 483Bairro Pioneiro - Caxias do Sul/RS

Brasil - CEP: 95.042-010

Fone: 54 3217.0221Fax: 54 3211.1022

Filial Minas Gerais:

Avenida Rio Mantiqueira, 1481Riacho das Pedras - Contagem/MG

Brasil - CEP: 32280-245

Fone: 31 3361.1080Fax: 31 3361.2248

CERTIFICAÇÕESISO 14001:2004

nº 46662Prevenção da poluição

e preservação ambiental.

OHSAS 18001:2007nº46663

Excelência na segurançae saúde ocupacional.

ISO 9001:2008nº 32313

Sistema deGestão da Qualidade.