Catalog for Auction:Richline - goldmachinery.com · Catalog for Auction:Richline This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness,

Page 1Printed:03/13/2017 09:05

KOSTER INDUSTRIES INC.40 DANIEL STREET, SUITE #2

FARMINGDALE, NY 11735(631) 454-1766 FAX:(631) 454-1779

http://www.kosterindustries.com

Catalog for Auction:RichlineThis catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy,

genuineness, authenticity, description, weight, count or measure of any of the lots specifiedherein.

KOSTER INDUSTRIES INC. ~Auctioneers~Appraisers~Liquidators~

Lot Num Description Lot Num Description

1 CHUBB SECURITY MDL. 6420-306 SINGLE DOOR FLOOR SAFE, 64" HIGH X 22-1/4" WIDE X 22-1/4" LONG, S/N: 300501-81 [COMBO IS AVAILABLE] [LOCATED IN ROANOKE, VA]

2 DUFF MDL. UM3 VERTICAL MILLING MACHINE, WITH 8" X 27" TABLE, ROUND OVER-ARM TYPE, 310-3400 RPM, S/N: 2055 [LOCATED IN ROANOKE, VA]

3 SUNNEN MDL. MBBT290D-MS HONING MACHINE, WITH 300-800 RPM, S/N: 16852 [LOCATED IN ROANOKE, VA]

4 SUNNEN HONING CABINET & CONTENTS OF SUNNEN TOOLING [LOCATED IN ROANOKE, VA]

5 SEOTOR PNEUMATIC DRILL UNIT [LOCATED IN ROANOKE, VA]

6 PRECISA MDL. 3100C GRAM SCALE [LOCATED IN ROANOKE, VA]



9 JEWELERS VISE [LOCATED IN ROANOKE, VA]




13 PHASE II ARBOR PRESS [LOCATED IN ROANOKE, VA]

14 FOREDOM FLEX SHAFT GRINDER [LOCATED IN ROANOKE, VA]

15 DRILL PRESS [LOCATED IN ROANOKE, VA]

16 CAMERON MICRO DRILL PRESS [LOCATED IN ROANOKE, VA]

17 HONEYWELL CHART RECORDER [LOCATED IN ROANOKE, VA]

18 CON 3" COLD SAW [LOCATED IN ROANOKE, VA]

19 FEDERAL DIMENSION AIR GAUGE [LOCATED IN ROANOKE, VA]

20 INGERSOLL RAND 5HP ROTARY SCREW TYPE AIR COMPRESSOR, WITH AIR DRYER, RECEIVING TANK, S/N: A01439U93295 [LOCATED IN ROANOKE, VA]

21 POWERMATIC 6" TILTING TABLE TYPE DOUBLE END PEDESTAL GRINDER [LOCATED IN ROANOKE, VA]

22 BALDOR 6" TILTING TABLE TYPE DOUBLE END PEDESTAL GRINDER [LOCATED IN ROANOKE, VA]

23 POSALUX SWITZE MADE FLY-CUT / NOTCHING MACHINE [LOCATED IN ROANOKE, VA]

24 PROLIGHT CNC VERTICAL MACHINING CENTER, WITH 6" X 19-1/2" T-SLOTTED TABLE, FLASH CHANGE ARBOR, S/N: N/A [LOCATED IN ROANOKE, VA]

25 SERVO IMPACT II MDL. 7844-842 CNC VERTICAL MACHINING IMPACT DRILL, 4-AXIS, WITH PENDANT CONTROLS, 5" X 16" TABLE, 3-1/2" ROTARY TABLE, S/N: 91201-185 [LOCATED IN ROANOKE, VA]

Page 2Printed:03/13/2017 09:05




Catalog for Auction:Richline



26 WELDING MACHINE & CONTROLS [LOCATED IN ROANOKE, VA]

27 SPERRY-NEW HOLLAND MDL. 22 CHIP SPINNER, S/N: 32533 [LOCATED IN ROANOKE, VA]

28 SHULTHEISS BONDING MACHINE, DUAL PRESS TYPE, WITH DIGITAL TEMPERATURE CONTROLS, VACUUM PUMP, WATER TANK, ETC. [LOCATED IN ROANOKE, VA]

29 SHULTHEISS BONDING MACHINE, DUAL PRESS TYPE, WITH DIGITAL TEMPERATURE CONTROLS, VACUUM PUMP, WATER TANK, ETC. [LOCATED IN ROANOKE, VA]

30 ADVAPRESS ELECTRO HYDRAULIC 20 TON CAPACITY C-FRAME PRESS, 9" FRONT TO BACK X 17" RIGHT TO LEFT, S/N: 20TON1081 [LOCATED IN ROANOKE, VA]

31 HARDINGE MDL. HSL S59 SECONDARY OPERATION LATHE, S/N: HSL-5C-1695-E [LOCATED IN ROANOKE, VA]

32 HARDINGE MDL. HLS59 SECONDARY OPERATION LATHE, S/N: HSL-5C-4769T [LOCATED IN ROANOKE, VA]


34 HARDINGE MDL. HLS59 SECONDARY OPERATION LATHE, S/N: HSL-5C-2492K [LOCATED IN ROANOKE, VA]

35 HARDINGE MDL. HLS59 SECONDARY OPERATION LATHE, S/N: HSL-5C-722C [LOCATED IN ROANOKE, VA]


37 MODERN HYDRAULICS TECH 200 TON CAPACITY 4-POST PRESS, UPACTING TYPE, WITH 8" STROKE, 14" BETWEEN POSTS RIGHT TO LEFT, 10" FRONT TO BACK, 3-1/2" DIAMETER POST SIZE, HYDRAULIC UNIT, S/N: 2638 [LOCATED IN ROANOKE, VA]

38 MAXMAT 7 5" X 23" BENCH TYPE LATHE / DRILLING MACHINE, WITH VERTICAL DRILL ATTACHMENT, LATHE SPINDLE SPEEDS 65-2800 RPM, DRILL SPINDLE SPEEDS 420-1740 RPM, S/N: N/A [LOCATED IN ROANOKE, VA]

39 LOT OF HERMES TYPE 8000-128 10,000 RPM PANOGRAPHS [LOCATED IN ROANOKE, VA]

40 ELECTRIC STEAM GENERATOR [LOCATED IN ROANOKE, VA]

41 WELDING UNIT [LOCATED IN ROANOKE, VA]

42 HPR PLUS SERIES AIR DRYER [LOCATED IN ROANOKE, VA]

43 SMT MDL. HR01 MAGNETIC BARREL TUMBLER [LOCATED IN ROANOKE, VA]

44 STATHMOS-NORDT 75# BENCH SCALE [LOCATED IN ROANOKE, VA]

45 [2] PNEUMATIC STAMPING PRESSES [LOCATED IN ROANOKE, VA]

46 [11] ASSORTED DISPLAY / TOTE CABINETS [LOCATED IN ROANOKE, VA]

47 [2] PLATING POWER SUPPLIES [LOCATED IN ROANOKE, VA]

48 [2] PLATING POWER SUPPLIES [LOCATED IN ROANOKE, VA]

49 BEE 30-KVA TRANSFORMER [LOCATED IN ROANOKE, VA]

Page 3Printed:03/13/2017 09:05







50 J.3T CNC TOOL CRAFTER 6-SPINDLE NOTCHER / GRINDER, WITH [2] NSK ASTRO-E2550 & [1] NSK ASTRO-E4002 SPEED CONTROLS, PENDANT CONTROL, S/N: N/A [LOCATED IN ROANOKE, VA]

51 EISINGER ENTERPRISES SHOP OVEN [LOCATED IN ROANOKE, VA]

52 POSALUX FLY CUTTER & CONTROLS [LOCATED IN ROANOKE, VA]

53 PNEUMATIC LIFT MDL. 2DA GRAVITY DROP HAMMER, S/N: N/A [LOCATED IN ROANOKE, VA]

54 PNEUMATIC LIFT MDL. 2DA GRAVITY DROP HAMMER, S/N: 223 [LOCATED IN ROANOKE, VA]

55 ELECTRIC PANELS [LOCATED IN ROANOKE, VA]

56 [2] WHIRLWING SINGLE END BUFFING JACKS [LOCATED IN ROANOKE, VA]

57 LOT OF SHOP LIGHTS [LOCATED IN ROANOKE, VA]

58 TOUSDIAMONTS TYPE FT2 NOTCHER, S/N: 282-11 [LOCATED IN ROANOKE, VA]

59 TOUSDIAMONTS TYPE T.4 NOTCHER, S/N: 6.70.87 [LOCATED IN ROANOKE, VA]

60 TOUSDIAMONTS TYPE T.4 NOTCHER, S/N: 6.70.88 [LOCATED IN ROANOKE, VA]

61 ROLLING MILL [LOCATED IN ROANOKE, VA]

62 AIR-MITE PNEUMATIC BENCH PRESS [LOCATED IN ROANOKE, VA]

63 BENCH & CONTENTS [LOCATED IN ROANOKE, VA]

64 VERTICAL ROLLING DRUM MILL (FOR TUBING) [LOCATED IN ROANOKE, VA]

65 VERTICAL ROLLING DRUM MILL (FOR TUBING) [LOCATED IN ROANOKE, VA]

66 SWAGER [LOCATED IN ROANOKE, VA]

67 MDL. 25016 POWER SUPPLY [LOCATED IN ROANOKE, VA]

68 ROMANOFF HEATER [LOCATED IN ROANOKE, VA]

69 SCRIPTA PANTO ENGRAVER [LOCATED IN ROANOKE, VA]

70 ENERPAC 30 TON CAPACITY C-FRAME PRESS & PUMP UNIT [LOCATED IN ROANOKE, VA]

71 RUESCH KICK PRESS [LOCATED IN ROANOKE, VA]

72 EXCELSIOR #10 KICK PRESS [LOCATED IN ROANOKE, VA]

73 STANDARD #1A KICK PRESS [LOCATED IN ROANOKE, VA]

74 ZEH & HAHNEMANN POWER SCREW PRESS [LOCATED IN ROANOKE, VA]

75 WATSON STILLMAN APPROXIMATELY 50 TON CAPACITY HYDRAULIC 4-POST PRESS, S/N: 1082 [LOCATED IN ROANOKE, VA]

76 SHELF & CONTENTS [LOCATED IN ROANOKE, VA]

77 JOHNSON MELTING FURNACE [LOCATED IN ROANOKE, VA]

78 FLY CUTTER [LOCATED IN ROANOKE, VA]

79 FLY CUTTER [LOCATED IN ROANOKE, VA]

80 AIR-MATE PNEUMATIC PRESS [LOCATED IN ROANOKE, VA]

Page 4Printed:03/13/2017 09:05







81 H.P. PRELS MDL. 2D-4 PANTO ENGRAVER, S/N: 4788 [LOCATED IN ROANOKE, VA]

82 COFACET MARK II NOTCHER / FLY CUTTER [LOCATED IN ROANOKE, VA]

83 GILSON MDL. SS-14R SIEVE SHAKER, S/N: 880 [LOCATED IN ROANOKE, VA]

84 JOYAL WELDING UNIT [LOCATED IN ROANOKE, VA]

85 GOLAY HEAD [LOCATED IN ROANOKE, VA]

86 JACK SCREW PRESS [LOCATED IN ROANOKE, VA]

87 TOUSDIAMONTS MDL. T-25 FLY CUTTER MACHINE, S/N: 172-252 [LOCATED IN ROANOKE, VA]

88 TOUSDIAMONTS MDL. T-25 FLY CUTTER MACHINE, S/N: 16768 [LOCATED IN ROANOKE, VA]

89 COFACET MARK II NOTCHING / FLY CUTTING MACHINE [LOCATED IN ROANOKE, VA]

90 EUTECTIC 250-AMP ARC WELDER [LOCATED IN ROANOKE, VA]

91 TROYKE MDL. L5C-1C 4TH AXIS UNIT, S/N: 5232-1 [LOCATED IN ROANOKE, VA]

92 CRAFT TOOL DOUBLE END BUFFING UNIT [LOCATED IN ROANOKE, VA]

93 [2] GESSWEIN 3/4HP BUFFING UNITS, 3000 RPM, WITH BENCH [LOCATED IN ROANOKE, VA]

94 ULTRA CLEAN ULTRASONIC CLEANING UNIT [LOCATED IN ROANOKE, VA]

95 ARBE MDL. 2 DUST COLLECTOR, S/N: 0062599/01 [LOCATED IN ROANOKE, VA]

96 TORIT DUST COLLECTOR [LOCATED IN ROANOKE, VA]

97 I.SHOR MDL. 4 DUST COLLECTOR, S/N: F-299 [LOCATED IN ROANOKE, VA]

98 WHIRLWIND DUST COLLECTOR [LOCATED IN ROANOKE, VA]

99 I. SHOR MDL. 4 DUST COLLECTOR, S/N: F-66-6 [LOCATED IN ROANOKE, VA]

100 DUST COLLECTOR [LOCATED IN ROANOKE, VA]

101 RSB DUST COLLECTOR [LOCATED IN ROANOKE, VA]

102 SINGLE END BUFFING UNIT & BENCH [LOCATED IN ROANOKE, VA]

103 CYCLONE REACH-IN BLAST CABINET, WITH 18" X 15" X 9" WORK AREA [LOCATED IN ROANOKE, VA]

104 MULTIHERTZ 05/0 TYPE MHA AURUM CASTING CENTRIFUGE UNIT, S/N: 696 [LOCATED IN ROANOKE, VA]

105 MAXIMAT SUPER II 8" X 28" GEARED HEAD ENGINE LATHE, WITH POWER FEEDS, 55-2200 RPM, 3-JAW CHUCK, TAILSTOCK, STEADY REST, TOOL POST, S/N: C6PG7002 [LOCATED IN ROANOKE, VA]

106 CLAUSING / COLCHESTER "TORNADO" CNC 100 LATHE, S/N: C10046 [NEEDS MOTHER BOARD, CROSS SLIDE & BALL SCREW] (AS IS) [LOCATED IN ROANOKE, VA]

107 CONTROL POWER CO. POWER SUPPLY UNITS [LOCATED IN ROANOKE, VA]

108 LORAIN MDL. A25F50 HIGH FREQUENCY RECTROFIER [LOCATED IN ROANOKE, VA]

Page 5Printed:03/13/2017 09:05







109 E-Z SPARK MDL. ES1208C EDM MACHINE, WITH EZ-SPARK P36 CONTROLS, 20" X 33" X 7" TUB SIZE, S/N: 9030396 [LOCATED IN ROANOKE, VA]

110 DAYTON 7" X 12" HORIZONTAL PORTABLE BANDSAW, S/N: N/A [LOCATED IN ROANOKE, VA]

113 DISPLAY CASE & DISPLAY UNIT [LOCATED IN ROANOKE, VA]

114 WILTON TYPE 24513 25" GEARED HEAD FLOOR TYPE DRILL PRESS, WITH [8] SPEEDS 85-1460 RPM, S/N: 75743 [LOCATED IN ROANOKE, VA]

115 HARDINGE MDL. HC SECONDARY OPERATION TURRET LATHE, WITH 8-POSITION TURRET, POWER FEED, CARRIAGE FEED, VARI-SPEED DRIVE, 125-3000 RPM, S/N: N/A [LOCATED IN ROANOKE, VA]

116 HARDINGE MDL. HLVH TOOLROOM LATHE, WITH 5-C COLLET CHUCK, POWER FEED TO CARRIAGE & CROSS SLIDE, TOOL POST, TAILSTOCK, 125-3000 RPM, VARI-SPEED DRIVE, MITUTOYO 2-AXIS DIGITAL READOUT, S/N: N/A [LOCATED IN ROANOKE, VA]

117 CLAUSING-METOSA MDL. C1565VS GAP BED GEARED HEAD ENGINE LATHE, WITH 21"-15" X 65" METRIC / ENGLISH THREADING, 0-2300 RPM, 6 & 3-JAW CHUCKS, TOOL POST, ANILAM 2-AXIS DIGITAL READOUT, S/N: 30141 [LOCATED IN ROANOKE, VA]

118 HAAS SUPER MINI MILL 4-AXIS VERTICAL MACHINING CENTER, WITH 12" X 29" TABLE, CAT 40T SPINDLE, 10-POSITION TOOL CHANGER, HAAS CNC CONTROL, S/N: 28575 (2002) [LOCATED IN ROANOKE, VA]

119 HAAS MDL. HA5C 4TH AXIS COLLET INDEXER, S/N: 507269 [LOCATED IN ROANOKE, VA]

120 LOT OF ASSORTED CAT 40 TAPER TOOL HOLDERS [LOCATED IN ROANOKE, VA]

121 HARIG "SUPER 618" 6" X 18" POWER FEED SURFACE GRINDER, WITH 6" X 18" PERMANENT MAGNETIC CHUCK, S/N: N/A [LOCATED IN ROANOKE, VA]

122 IMPERIAL TOOL & CUTTER GRINDER, WITH AC MOTOR & CONTROLS [LOCATED IN ROANOKE, VA]

123 BRIDGEPORT SERIES I 2HP VERTICAL MILLING MACHINE, WITH 9" X 42" POWER FEED TABLE, R-8 SPINDLE, 60-4200 RPM, S/N: 12BR183340 [LOCATED IN ROANOKE, VA]

124 BRIDGEPORT J SERIES 1-1/2HP VERTICAL MILLING MACHINE, WITH 9" X 48" POWER FEED TABLE, R-8 SPINDLE, 60-4200 RPM, RISER, 2-AXIS ANILAM DIGITAL READOUT, S/N: 12BR150453 [LOCATED IN ROANOKE, VA]

125 OMNITURN MDL. GT-75 2-AXIS CNC TURNING CENTER, WITH 5-C COLLET CHUCK, TOOL SLIDE, OMNITURN CNC CONTROL, S/N: 2996635AH [LOCATED IN ROANOKE, VA]

126 HARDINGE 2-AXIS CNC SECONDARY OPERATION LATHE, WITH OMNITURN CNC CONTROL (S/N: 3180G35AH), 5-C COLLET CHUCK, S/N: DV59-17065 [LOCATED IN ROANOKE, VA]

127 RETSCH TYPE DH200 VACUUM GRINDER, S/N: 127240447 [LOCATED IN ROANOKE, VA]

128 SNL MDL GT EXPRESS 2-AXIS CNC LATHE, WITH GSKP88T-H CNC CONTROL, COOLANT, S/N: JB15-4069-S (2004) [LOCATED IN ROANOKE, VA]

Page 6Printed:03/13/2017 09:05







129 OMNITURN MDL. GT-JR 2-AXIS CNC TURNING CENTER, WITH OMNITURN CNC CONTROL, 5-C COLLET CHUCK, CONTROL, S/N: 139162 [LOCATED IN ROANOKE, VA]

130 EISLER 15-AMP SPOT WELDER, WITH ROBOTRON 1013A CONTROL, S/N: 123806 [LOCATED IN ROANOKE, VA]

131 VULCAN RINGMASTER TABLE SHEAR, WITH DIGITAL DISPLAY, HYDRAULICS, CHILLER, S/N: 5109 (2008) [LOCATED IN ROANOKE, VA]

132 BARRETT CENTRIFUGE UNIT, S/N: 1251361E [LOCATED IN ROANOKE, VA]

133 LASERTECH MDL. SW4001E JEWELRY LASER WELDER UNIT, S/N: D152 (1996) [LOCATED IN ROANOKE, VA]

134 JOYAL MDL. 60 /120MFD TACK WELDER, S/N: 933980 [LOCATED IN ROANOKE, VA]

135 JOYAL MDL. 60 /120MFD TACK WELDER, S/N: 12991-93 [LOCATED IN ROANOKE, VA]

136 TOUSDIAMANTS MDL. FMTD MOUDON TYPE T2E SWISS CUT FLY CUTTER BUFFING MACHINE, WITH RING CHUCK, S/N: 118301 [LOCATED IN ROANOKE, VA]

137 GROBET MDL. 24.850P STEAM GENERATOR, S/N: 5241 (2010) [LOCATED IN ROANOKE, VA]

138 PROTEO MDL. TL-25 5-AXIS CNC TURNING CENTER, WITH DUAL 5-C COLLET CHUCK, HEADS, TOOL SLIDE, FAGOR CNC CONTROL, S/N: 0060 (1998) [LOCATED IN ROANOKE, VA]

139 ACIERA F1 INDEXER NOTCHER, WITH PROGRAMMABLE IDLER, SCOPE & CONTROLS [LOCATED IN ROANOKE, VA]

140 NEUTEC MDL. J-2CE SERIES 3 CASTING MACHINE, 132kg, 1PH, 50/60Hz, 5kw, WITH SCHEMATIC INDEX N35-130 COOLER, S/N: J-2CE-53-273 [LOCATED IN ROANOKE, VA]

141 HOBART MDL. C-100 MIXER [LOCATED IN ROANOKE, VA]

142 VACUUM UNIT, WITH CENCO PUMP [LOCATED IN ROANOKE, VA]

143 GROBET MDL. 24.850P STEAM GENERATOR, S/N: 5327 (2010) [LOCATED IN ROANOKE, VA]

144 ROFIN TYPE SCM11 EC100 LASER WELDER UNIT, WITH ROFIN CNC CONTROLS, 4.9kw, S/N: 100100398/84 (2004) [LOCATED IN ROANOKE, VA]

145 TORIT DONALDSON MDL. EASY TRUNK DUST COLLECTOR, S/N: 1855812 [LOCATED IN ROANOKE, VA]

200 5C HARDINGE COLLETS [LOCATED IN PAWTUCKET, RI]




204 5C HARDINGE COLLETS, SOME EMERGENCY [LOCATED IN PAWTUCKET, RI]




Page 7Printed:03/13/2017 09:05








209 6H HARDINGE COLLETS [LOCATED IN PAWTUCKET, RI]

210 ASSORTED 5C COLLETS [LOCATED IN PAWTUCKET, RI]

211 5C COLLETS, SOME EMERGENCY [LOCATED IN PAWTUCKET, RI]

212 5C HARDINGE/HARDINGE TYPE COLLETS [LOCATED IN PAWTUCKET, RI]


214 5C HARDINGE, SOME EMERGENCY [LOCATED IN PAWTUCKET, RI]


216 B & S 11 COLLETS [LOCATED IN PAWTUCKET, RI]


218 5C ASSORTED EMERGENCY COLLETS [LOCATED IN PAWTUCKET, RI]

219 LARGE DRILL BITS, JACOBS CHUCK WITH 4" TAPER ADAPTORS, [2] 4-6" TAPER ADAPTORS [LOCATED IN PAWTUCKET, RI]

220 ASSORTED KJ COLLETS [LOCATED IN PAWTUCKET, RI]

221 ASSORTED WW SMALL COLLETS [LOCATED IN PAWTUCKET, RI]


223 5C HARDINGE TYPE COLLETS [LOCATED IN PAWTUCKET, RI]

224 5C HARDINGE, SOME HARDINGE TYPE COLLETS [LOCATED IN PAWTUCKET, RI]






230 2 DRAW BARS WITH ASSORTED COLLETS [LOCATED IN PAWTUCKET, RI]

231 ASSORTED TURRETL TOOLING [LOCATED IN PAWTUCKET, RI]

232 ASSORTED HARDINGE TURRET TOOLING & CUTTERS [LOCATED IN PAWTUCKET, RI]

233 HARDINGE CROSS SLIDE RISER BLOCKS AND TOOL HOLDER [LOCATED IN PAWTUCKET, RI]

234 BORING BAR CUTTERS [LOCATED IN PAWTUCKET, RI]

235 TURRET TOOLING AND CUTTERS [LOCATED IN PAWTUCKET, RI]

236 HARDINGE TOOL HOLDERS D4-D5-D6 WITH RISER BLOCK [LOCATED IN PAWTUCKET, RI]

237 BXA TOOL HOLDERS [LOCATED IN PAWTUCKET, RI]

238 ALORIS TYPE TOOL HOLDERS [LOCATED IN PAWTUCKET, RI]

Page 8Printed:03/13/2017 09:05













245 ENCO TOOL HOLDERS [LOCATED IN PAWTUCKET, RI]

246 ALORIS AXA TOOL POST/ASSORTED HOLDERS [LOCATED IN PAWTUCKET, RI]

247 ALORIS MODEL A TOOL POST WITH 2 BORING BAR HOLDERS [LOCATED IN PAWTUCKET, RI]


249 ASSORTED TOOL HOLDERS [LOCATED IN PAWTUCKET, RI]

250 ASSORTED TOOL HOLDERS [LOCATED IN PAWTUCKET, RI]

251 HARDINGE CROSS SLIDE BLOCK & ASM-C8 & VBS-F TOOL HOLDERS, ASSORTED TURRET TOOLING [LOCATED IN PAWTUCKET, RI]

252 SLIDING TABLE, ASSORTED LATHE TOOLING [LOCATED IN PAWTUCKET, RI]

253 LARGE TURRET TAIL STOCK TOOLING [LOCATED IN PAWTUCKET, RI]

254 LARGE TURRET TAIL STOCK TOOLING [LOCATED IN PAWTUCKET, RI]

255 [5] TOOL POST RINGS, ROCKERS, ASSORTED CUTTERS [LOCATED IN PAWTUCKET, RI]

256 SET OF [18] HARDINGE 5C COLLETS [LOCATED IN PAWTUCKET, RI]

257 HARDINGE TYPE SET OF [26] 5C ASSORTED COLLETS [LOCATED IN PAWTUCKET, RI]

258 HARDINGE & HARDINGE TYPE 5C COLLETS [LOCATED IN PAWTUCKET, RI]

259 ASSORTED LARGE TOOL BITS FOR LATHE [LOCATED IN PAWTUCKET, RI]

260 ASSORTED BORING HEADS [LOCATED IN PAWTUCKET, RI]

261 3 DRILL CHUCKS, 2MT TOOL, JACOBS 14N 1/2" DRILL CHUCKS & ADAPTORS [LOCATED IN PAWTUCKET, RI]

262 ROMANOFF DE-WAXER MACHINE, STAINLESS STEEL [LOCATED IN PAWTUCKET, RI]

263 ASSORTED WILL CHUCKS AND TOOLING [LOCATED IN PAWTUCKET, RI]

264 JACOBS DRILL CHUCKS AND ADAPTORS [LOCATED IN PAWTUCKET, RI]

265 ASSORTED DRILL CHUCKS AND ARBORS [LOCATED IN PAWTUCKET, RI]

266 S&M TP 10M COLLETS [LOCATED IN PAWTUCKET, RI]

267 ASSORTED LIVE AND DEAD CENTERS [LOCATED IN PAWTUCKET, RI]

268 HARDINGE 5DS EMERGENCY COLLETS [LOCATED IN PAWTUCKET, RI]

269 DEAD & LIVE CENTERS WITH ADAPTORS [LOCATED IN PAWTUCKET, RI]

Page 9Printed:03/13/2017 09:05







270 ASSORTED R8 TOOLING AND END MILLS [LOCATED IN PAWTUCKET, RI]

271 ASSORTED R8 TOOLING AND DRILL CHUCKS [LOCATED IN PAWTUCKET, RI]

272 ASSORTED R8 COLLETS, DRILL CHUCK [LOCATED IN PAWTUCKET, RI]

273 ASSORTED COLLETS, DRILL CHUCK [LOCATED IN PAWTUCKET, RI]

274 HORIZONTAL OVERARM SUPPORT [LOCATED IN PAWTUCKET, RI]

275 ASSORTED R8 COLLETS, DRILL CHUCK [LOCATED IN PAWTUCKET, RI]

276 ASSORTED COLLETS, GERMAN MADE [LOCATED IN PAWTUCKET, RI]

277 R8 COLLETS, DRILL CHUCK, R8 BLADE HOLDER, TOOLING [LOCATED IN PAWTUCKET, RI]

278 D3 CAM LOCK BACK PLATE, COLLET CHUCK ADAPTOR [LOCATED IN PAWTUCKET, RI]

279 HOLD DOWNS AND STUDS FOR MILLING MACHINE [LOCATED IN PAWTUCKET, RI]

280 2 - V BLOCKS [LOCATED IN PAWTUCKET, RI]

281 ASSORTED THREADED ADAPTORS [LOCATED IN PAWTUCKET, RI]

282 REAMERS AND DRILL BITS, ASSORTED [LOCATED IN PAWTUCKET, RI]

283 LARGE ASSORTMENT NEW REAMERS [LOCATED IN PAWTUCKET, RI]

284 2 RADIUS HOLDERS [LOCATED IN PAWTUCKET, RI]

285 FOREDOM TYPE FLEX SHAFT GRINDER [LOCATED IN PAWTUCKET, RI]

286 SAFETY SHIELD FOR BRIDGEPORT SPINDLE [LOCATED IN PAWTUCKET, RI]

287 HARDINGE 5C COLLETS [LOCATED IN PAWTUCKET, RI]

288 BROWN & SHARPE 5" X 10" MAGNETIC CHUCK [LOCATED IN PAWTUCKET, RI]

289 ASSORTED TAPS [LOCATED IN PAWTUCKET, RI]

290 RED-E-AIR 5C PNEUMATIC COLLET INDEXER [LOCATED IN PAWTUCKET, RI]

291 HORIZONTAL/VERTICAL 5C COLLET HOLDER [LOCATED IN PAWTUCKET, RI]

292 5C SPIN INDEX [LOCATED IN PAWTUCKET, RI]

293 5C HARDINGE MODEL HV-4 COLLET CLOSER [LOCATED IN PAWTUCKET, RI]

294 HARDINGE 21 COLLETS, ASSORTED

295 ENCO R8 BORING HEAD [LOCATED IN PAWTUCKET, RI]

296 ASSORTED MILLING CUTTERS, 1" SHANK [LOCATED IN PAWTUCKET, RI]

297 ASSORTED DRILL BITS [LOCATED IN PAWTUCKET, RI]

298 INGERSOLL RAND ARO DIAPHRAGM PUMP [LOCATED IN PAWTUCKET, RI]

299 ROCKWELL PRECISE ELECTRIC OFFSET JIG GRINDER [LOCATED IN PAWTUCKET, RI]

300 3S HOLDRIDGE RADIAL CUTTER [LOCATED IN PAWTUCKET, RI]

301 ROCKWELL PRECISE ELECTRIC OFFSET JIG GRINDER [LOCATED IN PAWTUCKET, RI]

Page 10Printed:03/13/2017 09:05







302 SUNNEN TOOL HOLDER CABINET WITH STONES, STONE HOLDER [LOCATED IN PAWTUCKET, RI]

303 HARDINGE 3C COLLET SET [LOCATED IN PAWTUCKET, RI]

304 BRADY PRO PLUS WIRE MARKER PRINTER [LOCATED IN PAWTUCKET, RI]

305 ASSORTED REAMERS [LOCATED IN PAWTUCKET, RI]

306 SOUTH BEND 5C HAND WHEEL DRAW BAR [LOCATED IN PAWTUCKET, RI]

307 2 BIJUR COOLANT UNITS [LOCATED IN PAWTUCKET, RI]

308 2 ANGLE BLOCKS, 1 HOLD DOWN [LOCATED IN PAWTUCKET, RI]

309 8 THREADERS, 1 PNEUMATIC SLIDING TABLE WITH CONTROLS AND MOTORS [LOCATED IN PAWTUCKET, RI]

310 KENNAMETAL TOOL HOLDER AND ASSORTED INSERTS [LOCATED IN PAWTUCKET, RI]


312 ETCO DIAMOND WHEEL DRESSER WITH CASE 115V [LOCATED IN PAWTUCKET, RI]

313 ASSORTED PIN GAUGES WITH CABINET [LOCATED IN PAWTUCKET, RI]

314 3 METAL TRAYS OF ASSORTED PIN GAUGES [LOCATED IN PAWTUCKET, RI]

315 3 WOOD BOXES OF ASSORTED PIN GAUGES [LOCATED IN PAWTUCKET, RI]

316 ASSORTED JIGS AND HOLDERS [LOCATED IN PAWTUCKET, RI]

317 GARDNER 1.5MM CROSS CUT TESTER [LOCATED IN PAWTUCKET, RI]

318 ROMANOFF VARI-TEMP CONTROL [LOCATED IN PAWTUCKET, RI]



321 2 SPIN INDEXERS, 5C [LOCATED IN PAWTUCKET, RI]

322 2 BOXES DO-ALL ASSORTED GAGE BLOCKS [LOCATED IN PAWTUCKET, RI]

323 2 BOXES ASSORTED GAGE BLOCKS [LOCATED IN PAWTUCKET, RI]

324 2 BOXES ASSORTED GAGE BLOCKS [LOCATED IN PAWTUCKET, RI]

325 2 BOXES ASSORTED MITUTOYO GAGE BLOCKS [LOCATED IN PAWTUCKET, RI]

326 6 BOXES ASSORTED KEYWAY BROACHES/BUSHINGS [LOCATED IN PAWTUCKET, RI]

327 STANDARD #2 DIAL GAUGES, STAND, WOOD CASE [LOCATED IN PAWTUCKET, RI]

328 B&S SET TAPER GAUGES WITH WOOD CASE [LOCATED IN PAWTUCKET, RI]

329 MITUTOYO 515-311 HEIGHT GAUGE WITH WOOD CASE [LOCATED IN PAWTUCKET, RI]

330 L & W 4301 PLATFORM DEMAGNETIZER, 6" X 12" [LOCATED IN PAWTUCKET, RI]

331 11 PNEUMATIC DEPRAG HAND TOOLS, 3 TOOL BALANCERS [LOCATED IN PAWTUCKET, RI]

332 ASSORTED PARKER FIXTURES [LOCATED IN PAWTUCKET, RI]

Page 11Printed:03/13/2017 09:05







333 TRANSMATION MULTI FUNCTION AV CALIBRATOR [LOCATED IN PAWTUCKET, RI]

334 AMETEK MDL. ACCUFORCE III DIGITAL FORGE TORQUE GAGES [LOCATED IN PAWTUCKET, RI]

335 AMETEK MDL. ACCUFORCE III DIGITAL FORGE TORQUE GAGES [LOCATED IN PAWTUCKET, RI]

336 UTICA MDL. DA130 DIAL INDICATING TORQUE WRENCH [LOCATED IN PAWTUCKET, RI]

337 2 SOCKET TORQUE WRENCHES [LOCATED IN PAWTUCKET, RI]

338 DO-ALL 12" X 18" LABORATORY BLACK GRANITE SURFACE PLATE [LOCATED IN PAWTUCKET, RI]

339 12" X 18" BLACK GRANITE SURFACE PLATE [LOCATED IN PAWTUCKET, RI]

340 2 - 6" DIAMETER BOWL FEEDERS AND CONTROL [LOCATED IN PAWTUCKET, RI]

341 ASTOR HAND OPERATED BUTTON PRESS [LOCATED IN PAWTUCKET, RI]

342 ASSORTED STAMPING TOOLS [LOCATED IN PAWTUCKET, RI]

343 RAPIDAIRE MDL. R5A UNCOILER [LOCATED IN PAWTUCKET, RI]

344 36" DIAMETER HORIZONTAL PAN PAYOFF [LOCATED IN PAWTUCKET, RI]











355 CAVITRON ULTRASONIC WELDER FOR PLASTIC [LOCATED IN PAWTUCKET, RI]

356 SONIC-MILL ULTRASONIC WELDER FOR PLASTIC [LOCATED IN PAWTUCKET, RI]

357 DUKANE ULTRASONIC WELDER FOR PLASTIC [LOCATED IN PAWTUCKET, RI]

358 HUSKY TOOL BOXES CONVERTED TO DUSTED COLLECTOR [LOCATED IN PAWTUCKET, RI]

359 HUSKY TOOL BOXES CONVERTED TO DUSTED COLLECTOR [LOCATED IN PAWTUCKET, RI]

360 JOHNSON MDL. 900SS GAS CRUCIBLE MELTING FURNACE [LOCATED IN PAWTUCKET, RI]

361 POLY PRO PLATING TANK WITH THREE 9.35 GALLON 150 PSI FILTERS [LOCATED IN PAWTUCKET, RI]

362 INSULATED THROUGH HOLE CYLINDER WITH DUCT WORK [LOCATED IN PAWTUCKET, RI]

Page 12Printed:03/13/2017 09:05







363 FIOA 2 BARREL WET FINISHING MACHINE [LOCATED IN PAWTUCKET, RI]

364 PORTABLE GLASS JEWELRY DISPLAY [LOCATED IN PAWTUCKET, RI]

365 PORTABLE GLASS JEWELRY DISPLAY [LOCATED IN PAWTUCKET, RI]

366 EVANS PLASTIC COATINGS MELTING POT [LOCATED IN PAWTUCKET, RI]

367 DUAL MOTOR POLISHING BEND WITH HOODS [LOCATED IN PAWTUCKET, RI]

368 SPENCER TURBO-BLOWER 30HP DUST COLLECTOR, 2500-CFM, WITH BLOWER [LOCATED IN PAWTUCKET, RI]

369 PRECISION THERLCO STAINLESS STEEL OVEN [LOCATED IN PAWTUCKET, RI]

370 CARON MDL. CRS AUTOMATIC AIR PURGE TANK [LOCATED IN PAWTUCKET, RI]

371 CC TECH PLYPRO PLATING LINE FOR PALADIUM, SILVER, WHITE GOLD, GOLD AND RHODIUM [LOCATED IN PAWTUCKET, RI]

372 CRAFTSMAN 1/3 HP DOUBLE END BENCH GRINDER [LOCATED IN PAWTUCKET, RI]

373 JET BELT SANDER/BENCH GRINDER COMBINATION [LOCATED IN PAWTUCKET, RI]

374 DECKEL SO TOOL GRINDER [LOCATED IN PAWTUCKET, RI]

375 BROWN & SHARPE HEIGHT GAGE WITH MITUTOYO MU-CHECKER [LOCATED IN PAWTUCKET, RI]

376 BROWN & SHARPE 24" DIGITAL HEIGHT GAGE [LOCATED IN PAWTUCKET, RI]

377 MARK 10 MDL. BG025 MITUTOYO DIGIMATIC INDICATOR [LOCATED IN PAWTUCKET, RI]

378 WILSON 3JR B C HARDNESS TESTER [LOCATED IN PAWTUCKET, RI]


380 TUKON MODEL 300 BM HARDNESS TESTER [LOCATED IN PAWTUCKET, RI]

381 SHERLINE MDL. 3000 MINI LATHE [LOCATED IN PAWTUCKET, RI]

382 ROPER WHITNEY PUNCH & DIE SET [LOCATED IN PAWTUCKET, RI]

383 4 - ROPER WHITNEY 318 4 TON HAND PUNCH; 1- ROPER WHITNEY BENCH MOUNT SLITTER [LOCATED IN PAWTUCKET, RI]

384 CT50 - SL32 Q.C. CNC TOOLING [LOCATED IN PAWTUCKET, RI]

385 CT40 CNC QUICK CHANGE TOOLING [LOCATED IN PAWTUCKET, RI]

386 CT40 CNC QUICK CHANGE TOOLING WITH PROCUNIER TAPPING ATTACHMENT [LOCATED IN PAWTUCKET, RI]






Page 13Printed:03/13/2017 09:05











396 ASSORTED HORIZONTAL & VERTICAL MILLING ATTACHMENTS [LOCATED IN PAWTUCKET, RI]

397 3 FLOURESCENT BENCH LAMPS [LOCATED IN PAWTUCKET, RI]

398 3 CAM LOCK BACK PLATE, THREADED FACE PLATE [LOCATED IN PAWTUCKET, RI]

399 ASSORTED REPLACEMENT JAWS FOR LATHE CHUCK, [2] 5C NOSE CONES, [2] LATHE JAWS, BED STOP, 5C NOSE CONE FOR LATHE, LARGE ALUMINUM REPLACEMENT JAWS FOR LATHE CHUCK [LOCATED IN PAWTUCKET, RI]

400 TOOL POST RING & ROCKER WITH OFFSET TOOL HOLDER, ASSORTED TOOL HOLDERS [LOCATED IN PAWTUCKET, RI]

401 QUICK PRODUCTION TOOL POSTS, [2] 6" FACE PLATES [LOCATED IN PAWTUCKET, RI]

402 ASSORTED DRILLS & REAMERS [LOCATED IN PAWTUCKET, RI]

403 ASSORTED KEYWAY BROACHES & BUSHINGS [LOCATED IN PAWTUCKET, RI]

404 FOWLER MDL. 52-215-006 0-6" MICROMETER SET, .0001" RESOLUTION [LOCATED IN PAWTUCKET, RI]

405 2 - 2" VISES [LOCATED IN PAWTUCKET, RI]

406 ASSORTED TOOL HOLDERS FOR LATHE [LOCATED IN PAWTUCKET, RI]


408 18-DRAWER CABINET, WITH SPRINGS, REAMERS, CUTTERS, THREADING TOOLS [LOCATED IN PAWTUCKET, RI]


410 ASSORTED DRILL CHUCKS, 1 LIVE CENTER [LOCATED IN PAWTUCKET, RI]

411 9-DRAWER CABINET, WITH MORRIS TAPPING TOOLS, DRILL BITS, REAMERS, CUTTING & MILLING TOOLS [LOCATED IN PAWTUCKET, RI]

412 BROWN & SHARPE MILLING CUTTER, 4 DRILL CHUCK ADAPTORS [LOCATED IN PAWTUCKET, RI]

413 4-DRAWER CABINET, WITH TAPPING TOOLS, REAMERS, BROACHING TOOLS [LOCATED IN PAWTUCKET, RI]

414 NEW DOUIBLE REAMERS, MORSE 5/8" HSS TOOLING [LOCATED IN PAWTUCKET, RI]

415 SAUTER MDL. RC1613 SCALE [LOCATED IN PAWTUCKET, RI]

416 DIAMOND DIES FOR BULL BLOCK & WIRE DRAWING [LOCATED IN PAWTUCKET, RI]

417 2 DEAD CENTERS, REAMER WITH ADAPTOR [LOCATED IN PAWTUCKET, RI]

418 1 1/4" DIAMETER THREADING TOOL [LOCATED IN PAWTUCKET, RI]

Page 14Printed:03/13/2017 09:05







419 DUMORE MDL. 44-011 INTEGRAL SPINDLE TYPE TOOL POST GRINDER [LOCATED IN PAWTUCKET, RI]

420 ASSORTED TOOLING FOR LATHE [LOCATED IN PAWTUCKET, RI]

421 DUMONT MDL. 90 METRIC BROACH SET [LOCATED IN PAWTUCKET, RI]

422 LOT OF [35] ASSORTED JEWELER'S METAL STAMPS, VINTAGE SILVERSMITH, SCULPTURE TOOLS, VARIOUS SHAPES [LOCATED IN PAWTUCKET, RI]

423 HORIZONTAL / VERTICAL INDEXING ATTACHMENT, TRW STYLE A ANGLE CUTTER, REPLACEMENT JAWS FOR LATHE, LARGE [LOCATED IN PAWTUCKET, RI]

424 SLIDING TABLE [LOCATED IN PAWTUCKET, RI]

425 JONES & SHIPMAN MDL. UX8238/241 UNIVERSAL VISE [LOCATED IN PAWTUCKET, RI]

426 ASSORTED DIE SETS [LOCATED IN PAWTUCKET, RI]

427 ASSORTED DIE SETS [LOCATED IN PAWTUCKET, RI]

428 2 LARGE FOLLOW RESTS FOR LATHE [LOCATED IN PAWTUCKET, RI]

429 ASSORTED FACE PLATES FOR LATHE [LOCATED IN PAWTUCKET, RI]

430 ASSORTED FACE PLATES FOR LATHE [LOCATED IN PAWTUCKET, RI]

431 81-PIECE RECTANGULAR GAGE BLOCK SET - INCH SYSTEM [LOCATED IN PAWTUCKET, RI]

432 DUMORE MDL. 80 METRIC BROACH SET [LOCATED IN PAWTUCKET, RI]

433 4-DRAWER CABINET, WITH TOOL POST CUTTERS, BITS, NEW HIGH SPEED FEMALE CENTERS, TORIT TOOL POST CUTTER LOCATED IN PAWTUCKET, RI]

434 KENNAMETAL FACING TOOL HOLDERS & CUTTER SET - BRIDGEPORT MILL [LOCATED IN PAWTUCKET, RI]

435 LARGE ALORIS TYPE QUICK CHANGE TOOL POST WITH HOLDERS [LOCATED IN PAWTUCKET, RI]

436 6" JAW CHUCK WITH TAPERED MOUNTING BACK PLATE [LOCATED IN PAWTUCKET, RI]

437 10" 4 JAW LATHE CHUCK [LOCATED IN PAWTUCKET, RI]

438 NEWS 8" SUPER SPACER WITH 3 JAW CHUCK [LOCATED IN PAWTUCKET, RI]

439 ROHM 8" 3 JAW LATHE CHUCK [LOCATED IN PAWTUCKET, RI]

440 10" 3 JAW LATHE CHUCK CAM LOCK NO JAWS [LOCATED IN PAWTUCKET, RI]

441 2 CENTERS FOR SUPER SPACER [LOCATED IN PAWTUCKET, RI]

442 8" 4 JAW LATHE CHUCK WITH TAPERED BACK PLATE [LOCATED IN PAWTUCKET, RI]


444 6" 3-JAW CHUCK [LOCATED IN PAWTUCKET, RI]

445 8" 3 JAW CHUCK [LOCATED IN PAWTUCKET, RI]



Page 15Printed:03/13/2017 09:05







448 6" 6 JAW BUCK CHUCK [LOCATED IN PAWTUCKET, RI]

449 6" CUSHMAN 3 JAW CHUCK [LOCATED IN PAWTUCKET, RI]

450 KITAGAWA 6" 3 JAW CHUCK [LOCATED IN PAWTUCKET, RI]

451 8" CUSHMAN 3 JAW CHUCK [LOCATED IN PAWTUCKET, RI]


453 L&R MDL. 90H ULTRASONIC CLEANER [LOCATED IN PAWTUCKET, RI]

454 INVESTMENT SCALE [LOCATED IN PAWTUCKET, RI]

455 AND ELECTRONIC BALANCE SCALE #FX6000 [LOCATED IN PAWTUCKET, RI]

456 SARTORIUS BALANCE SCALE [LOCATED IN PAWTUCKET, RI]






462 SARTORIUS ELECTRONIC BALANCE SCALE [LOCATED IN PAWTUCKET, RI]



465 MANTIS VISION SCOPE [LOCATED IN PAWTUCKET, RI]

466 TENSITRON TRIGGER TENSION METER [LOCATED IN PAWTUCKET, RI]

467 BAUSCH & LOMB MICROSCOPE [LOCATED IN PAWTUCKET, RI]

468 LECA MICROSCOPE [LOCATED IN PAWTUCKET, RI]

469 OPTIDRESS PRECISION WHEEL DRESSER [LOCATED IN PAWTUCKET, RI]

470 STOCKER & YALE SURFACE LIGHTS [LOCATED IN PAWTUCKET, RI]

471 9" X 12" HEATED PLATEN PRESS PLATE [LOCATED IN PAWTUCKET, RI]

472 AMERICAN OPTICAL INSPECTION SCOPE [LOCATED IN PAWTUCKET, RI]

473 SCHMIDT PRECISION ANGLE BLOCKS [LOCATED IN PAWTUCKET, RI]

474 MITUTOYO DIGITAL INDICATOR/MEASURING TOOLS [LOCATED IN PAWTUCKET, RI]

475 ASSORTED MITUTOYO SMALL DIGITAL HEIGHT GAUGES [LOCATED IN PAWTUCKET, RI]

476 6" APERTUNE TYPE DEMAGNETIZER [LOCATED IN PAWTUCKET, RI]

477 DYER DIAL GAGE REPAIR KIT [LOCATED IN PAWTUCKET, RI]

478 DYER DIAL GAGE REPAIR KIT [LOCATED IN PAWTUCKET, RI]

479 MITUTOYO MDL. #526-103 HOLE GAGE SET [LOCATED IN PAWTUCKET, RI]

480 ASSORTED HEIGHT GAGES [LOCATED IN PAWTUCKET, RI]

Page 16Printed:03/13/2017 09:05







481 PRECISION MEASURING BLOCKS FOR SURFACE PLATE [LOCATED IN PAWTUCKET, RI]

482 STARRET MEASURING FIXTURE WITH GAGE [LOCATED IN PAWTUCKET, RI]

483 ASSORTED STARRET PRECISION TOOLS [LOCATED IN PAWTUCKET, RI]

484 2 INCLINABLE 1" VISES [LOCATED IN PAWTUCKET, RI]

485 BORLETTI 6" HEIGHT GAGE [LOCATED IN PAWTUCKET, RI]

486 ASSORTED DIGITAL MEASURING TOOLS [LOCATED IN PAWTUCKET, RI]

487 B&S RADIUS MEASURING TOOL/STARRET SET PARALLELS [LOCATED IN PAWTUCKET, RI]

488 MITUTOYO OPTICAL FLATS; LOT OF 5 [LOCATED IN PAWTUCKET, RI]

489 ASSORTED VAN KEUREN THREAD MEASURING TOOLS [LOCATED IN PAWTUCKET, RI]

490 MITUTOYO (2) 6" DIGITAL VERNIER [LOCATED IN PAWTUCKET, RI]

491 FOWLER 6" DIGITAL VERNIER, 6" B&S DIAL CALIPER [LOCATED IN PAWTUCKET, RI]

492 MITUTOYO DIGITAL HEIGHT GAGE HDS [LOCATED IN PAWTUCKET, RI]

493 SET OF 6 BLOCK CALIPERS [LOCATED IN PAWTUCKET, RI]

494 ASSORTED DIAL INDICATORS [LOCATED IN PAWTUCKET, RI]

495 ASSORTED DIAL INDICATORS [LOCATED IN PAWTUCKET, RI]

496 MITUTOYO DIGITAL VERNIER 24" [LOCATED IN PAWTUCKET, RI]

497 MITUTOYO SET OF HOLTESTERS [LOCATED IN PAWTUCKET, RI]

498 B&S AND MITUTOYO HOLTESTS [LOCATED IN PAWTUCKET, RI]

499 B&S 9" HEIGHT GAGE [LOCATED IN PAWTUCKET, RI]

500 MITUTOYO DIGITAL HEIGHT GAGE 1" [LOCATED IN PAWTUCKET, RI]

501 MITUTOYO DIAL GAGE REPAIR KIT [LOCATED IN PAWTUCKET, RI]

502 MITUTOYO SLIP GAGE TOOLS [LOCATED IN PAWTUCKET, RI]

503 STARETT DEPTH GAGE [LOCATED IN PAWTUCKET, RI]

504 KANON 18" STAINLESS VERNIER [LOCATED IN PAWTUCKET, RI]

505 1 MITUTOYO/1 STARRETT SQ. CALIPERS [LOCATED IN PAWTUCKET, RI]

506 MITUTOYO (2) CALIPERS [LOCATED IN PAWTUCKET, RI]

507 MITUTOYO/FEDERAL CALIPERS [LOCATED IN PAWTUCKET, RI]

508 MITUTOYO DIGITAL CALIPER AND MITUTOYO VERNIER [LOCATED IN PAWTUCKET, RI]

509 MITUTOYO DIGITAL CALIPER [LOCATED IN PAWTUCKET, RI]



Page 17Printed:03/13/2017 09:05








513 MITUTOYO DIGITAL CALIPER WITH THREAD CHECK 360° STAND [LOCATED IN PAWTUCKET, RI]

514 SET OF MITUTOYO DIGITAL CALIPERS [LOCATED IN PAWTUCKET, RI]

515 SET OF MITUTOYO ANALOG CALIPERS [LOCATED IN PAWTUCKET, RI]

516 SET OF MITUTOYO DIGITAL PRECISION MEASURING TOOLS [LOCATED IN PAWTUCKET, RI]

517 SET OF MITUTOYO DIGITAL CALIPERS [LOCATED IN PAWTUCKET, RI]

518 MITUTOYO PRECISION ANALOG CALIPERS [LOCATED IN PAWTUCKET, RI]




522 MITUTOYO DEPTH GAGE [LOCATED IN PAWTUCKET, RI]

523 PRECISION WATCH CALIPER [LOCATED IN PAWTUCKET, RI]


525 SET OF MITUTOYO BLADE DIAL INDICATORS [LOCATED IN PAWTUCKET, RI]

526 SET OF MITUTOYO BLADE DIAL INDICATORS [LOCATED IN PAWTUCKET, RI]

527 SYSTEM 3R J-TYPE PRECISION TOOLING [LOCATED IN PAWTUCKET, RI]

528 NEW HERMES ENGRAVER [LOCATED IN PAWTUCKET, RI]

529 NEW HERMES ENGRAVER WITH LETTERING [LOCATED IN PAWTUCKET, RI]

530 PANOGRAPH ENGRAVING LETTERING [LOCATED IN PAWTUCKET, RI]

531 SMD MOTORIZED ENGRAVER WITH LETTERING [LOCATED IN PAWTUCKET, RI]

532 PANTOGRAPH ENGRAVING LETTERING [LOCATED IN PAWTUCKET, RI]

533 SMD MOTORIZED ENGRAVER WITH LETTERING [LOCATED IN PAWTUCKET, RI]

534 PANOGRAPH ENGRAVING LETTERING [LOCATED IN PAWTUCKET, RI]

535 NEW HERMES ENGRAVER WITH LETTERING [LOCATED IN PAWTUCKET, RI]

536 LOT OF MILWAUKEE UTILITY TOOLS [LOCATED IN PAWTUCKET, RI]

537 BALDOR MOTOR WITH PNUEMATIC PUMP AND PRESSURE GAUGE [LOCATED IN PAWTUCKET, RI]

538 DUMORE MDL 8526 TOOL POST GRINDER [LOCATED IN PAWTUCKET, RI]

539 SIMONDS CHROME SLITTER LATHES [LOCATED IN PAWTUCKET, RI]

540 LINK-O-MATIC & CAVALLIN ROLLING MILL WITH CART [LOCATED IN PAWTUCKET, RI]

541 LOT OF PNUEMATIC PRESSES - AIR-MITE [LOCATED IN PAWTUCKET, RI]

Page 18Printed:03/13/2017 09:05







542 LTDV HEAT SEALER [LOCATED IN PAWTUCKET, RI]

543 SENTRY MDL A5889 SAFE [LOCATED IN PAWTUCKET, RI]

544 NEW HERMES NHI ENGRAVER WITH LETTERING - COMPLETE [LOCATED IN PAWTUCKET, RI]

545 MDL. 3000LT NEW HERMES VANGUARD ENGRAVER WITH LINK MOTION SOFTWARE & LETTERING - COMPLETE [LOCATED IN PAWTUCKET, RI]

546 TORNADO VACUUM PUMP CLEANING SYSTEM - 55 GALLON [LOCATED IN PAWTUCKET, RI]

547 ROTARIAN [LOCATED IN PAWTUCKET, RI]

548 JOYAL WELDER [LOCATED IN PAWTUCKET, RI]




552 PNEUMATIC PRESS SET UP FOR RING ASSEMBLY [LOCATED IN PAWTUCKET, RI]

553 REDONDA ENGRAVING MACHINE [LOCATED IN PAWTUCKET, RI]

554 LOT OF 2 GARRETT METAL DETECTORS [LOCATED IN PAWTUCKET, RI]

555 SCHMIDT PRESS [LOCATED IN PAWTUCKET, RI]

556 ASE SCALE [LOCATED IN PAWTUCKET, RI]

557 SCHMIDT PRESS [LOCATED IN PAWTUCKET, RI]

558 PNEUMATIC CYLINDERS AND ATTACHMENTS [LOCATED IN PAWTUCKET, RI]

559 ROBOHAND PNUEMATIC SLIDES [LOCATED IN PAWTUCKET, RI]

560 HARDINGE CROSS SLIDE WITH CUT OFF ATTACHMENT AND TOOLING [LOCATED IN PAWTUCKET, RI]

561 BODINE DRILL WITH SPEED CONTROL [LOCATED IN PAWTUCKET, RI]

562 LOT OF MOTORS [LOCATED IN PAWTUCKET, RI]

563 VIRAX/GTD THREADING TOOLS [LOCATED IN PAWTUCKET, RI]

564 TWO (2) MIDWEST PACIFIC IMPULSE HEAD SEALERS [LOCATED IN PAWTUCKET, RI]

565 B.CAMES XY CROSS SLIDE, 1" & 2" VISES [LOCATED IN PAWTUCKET, RI]

566 TELCO/BURGMASTER TAPPING TOOLS [LOCATED IN PAWTUCKET, RI]

567 BODINE POLISHER [LOCATED IN PAWTUCKET, RI]

568 [2] VIBRATORY BOWL FEEDS FOR EARRING POST [LOCATED IN PAWTUCKET, RI]

569 1 1/2" CAPACITY HOLE PUNCHER - LOT OF TWO [LOCATED IN PAWTUCKET, RI]

570 LOT OF TUBE FORMING TOOLING [LOCATED IN PAWTUCKET, RI]

571 LOT OF WIRE DRAW PLATES ALUMINUM [LOCATED IN PAWTUCKET, RI]

572 ARO MDL SEL04A-315A ELECTRIC TORQUE WRENCH [LOCATED IN PAWTUCKET, RI]

Page 19Printed:03/13/2017 09:05







573 LOT OF TWO (2) MAGNETIC VISES WITH V BLOCKS [LOCATED IN PAWTUCKET, RI]

574 LOT OF TWO (2) EAGLE ROCK TECH WHEEL DRESSERS [LOCATED IN PAWTUCKET, RI]

575 DIAMOND NIB HOLDER & MACHINE SUPPORT [LOCATED IN PAWTUCKET, RI]

576 J&S DIAMOND WHEEL DRESSER [LOCATED IN PAWTUCKET, RI]

577 LAST WORD MDL. C-241 DIAMOND WHEEL DRESSER [LOCATED IN PAWTUCKET, RI]

578 6" SQUARE PIVOTING TABLE [LOCATED IN PAWTUCKET, RI]

579 HARIG EXTERNAL GRIND ON A SURFACE GRINDER [LOCATED IN PAWTUCKET, RI]

580 HARIG EXTERNAL GRIND ON A SURFACE GRINDER [LOCATED IN PAWTUCKET, RI]

581 HARIG UNI-DEX WITH 4" MAGNETIC PLATE [LOCATED IN PAWTUCKET, RI]

582 HARIG GRIND-ALL NO. 1 WITH CASE [LOCATED IN PAWTUCKET, RI]



585 2" X 3" CENTERLESS GRINDING PLATE [LOCATED IN PAWTUCKET, RI]


587 6" VISE [LOCATED IN PAWTUCKET, RI]

588 MITUTOYO MICRO PARALLELS, S/N: 181-961 [LOCATED IN PAWTUCKET, RI]

589 6" MILLING VISE [LOCATED IN PAWTUCKET, RI]

590 5" MILLING VISE [LOCATED IN PAWTUCKET, RI]

591 BOX OF ASSORTED GRAPHITE BLOCKS & RODS [LOCATED IN PAWTUCKET, RI]

592 LOT OF CHROME PLATED ROTARY HAND TOOLS [LOCATED IN PAWTUCKET, RI]

593 LOT OF MIDWEST SIGHT FLOW INDICATORS [LOCATED IN PAWTUCKET, RI]

594 ST. MARY MDL 500 PT SPIN ROLL [LOCATED IN PAWTUCKET, RI]

595 BODINE SPEED CONTROL & MOTOR [LOCATED IN PAWTUCKET, RI]

596 TANAKA SEIKI WIRE SPOOLER [LOCATED IN PAWTUCKET, RI]

597 ANJA ENGINEERING CORP MDL WTM 10 POSITION GRAPH CHART RECORDER [LOCATED IN PAWTUCKET, RI]



600 TAUMEL DOUBLE OPPOSED RIVETERS [LOCATED IN PAWTUCKET, RI]

601 KAGAN RING ROLLER WITH LOT OF ASSORTED SPRINGS [LOCATED IN PAWTUCKET, RI]

602 LOT OF ASSORTED DRILL BITS AND REAMERS [LOCATED IN PAWTUCKET, RI]

603 CINCINNATI BICKFORD TOOL SUPER SERVICE RADIAL ARM DRILL 4' X 13" [LOCATED IN PAWTUCKET, RI]

Page 20Printed:03/13/2017 09:05







604 150 TON HYDRAULIC COINING PRESS [LOCATED IN PAWTUCKET, RI]

605 PERKINS 5 TON BENCH TOP PRESS WITH SLIDE FEED [LOCATED IN PAWTUCKET, RI]

606 DOUBLE END PEDESTAL GRINDER "STERLING" [LOCATED IN PAWTUCKET, RI]

607 ZEH AND HAHNEMANN CO MECHANICAL 5 TON PRESS [LOCATED IN PAWTUCKET, RI]

608 MODEL H100 LOT OF AIR FEED WITH CONTROL BOX [LOCATED IN PAWTUCKET, RI]

609 ENGELHARD BI-SPIN WIRE WEAVING MACHINE - GOLD, SILVER & PLATINUM WIRE [LOCATED IN PAWTUCKET, RI]

610 GRAY MILLS COOLENT PUMPING SYSTEMS [LOCATED IN PAWTUCKET, RI]

611 9 PASS WIRE DRAWING MACHINE [LOCATED IN PAWTUCKET, RI]

612 MDL XL815 OGP OPTICAL COMPARATOR/CONTOUR PROJECTOR 14" [LOCATED IN PAWTUCKET, RI]

613 LNS MODEL ECO LOAD L MAGAZINE STYLE BAR FEED [LOCATED IN PAWTUCKET, RI]

614 MATSUURA MDL MC-510VG 3-AXIS CNC VERTICAL MACHINING CENTER (1996) [LOCATED IN PAWTUCKET, RI]

615 ECOA E-Z STACKER PORTABLE LIFT [LOCATED IN PAWTUCKET, RI]

616 9" X 12" CENTRIFUGAL WHITE METAL CASTING MACHINE [LOCATED IN PAWTUCKET, RI]

617 CONTENTI 9" X 12" CENTRIFUGAL WHITE METAL CASTING MACHINE [LOCATED IN PAWTUCKET, RI]

618 CONLEY 9" X 12" CENTRIFUGAL WHITE METAL CASTING MACHINE [LOCATED IN PAWTUCKET, RI]


620 NORCOTT-MORRIS WHITE METAL, ZINC, PEWTER CASTING MACHINE [LOCATED IN PAWTUCKET, RI]





625 PAIR OF 9" X 12" CENTRIFUGAL WHITE METAL CASTING MACHINE [LOCATED IN PAWTUCKET, RI]

626 JONES & LAMSON MDL EPIC 30 OPTICAL COMPARATOR [LOCATED IN PAWTUCKET, RI]

627 MAZAK QUICK TURN 8N CNC TURNING CENTER W/MAZATROL T-32-2 CONTROL (2002) [LOCATED IN PAWTUCKET, RI]

628 PNEUMATIC DROP HAMMER WITH Z GATE, TYPE D, S/N: 445 [LOCATED IN PAWTUCKET, RI]

629 LOT OF COOLANT TANKS [LOCATED IN PAWTUCKET, RI]

Page 21Printed:03/13/2017 09:05







630 HCH MULLER MDL R2-HA ROTARY SWAGING MACHINE .65" CAPACITY [LOCATED IN PAWTUCKET, RI]

631 2" BELT SANDER [LOCATED IN PAWTUCKET, RI]

632 7 DRAW CABINET/TABLE BLUE [LOCATED IN PAWTUCKET, RI]

633 ELDORADO MDL M8110 MEGA 50-1032 GUN DRILL [LOCATED IN PAWTUCKET, RI]

634 MAZAK MDL M5 CNC 24" X 62" METRIC LATHE [LOCATED IN PAWTUCKET, RI]

635 CINCINNATI CENTERLESS GRINDER [LOCATED IN PAWTUCKET, RI]

636 FEDERAL 22 TON PRESS [LOCATED IN PAWTUCKET, RI]

637 PERKINS 15 TON GAP FRAME FLYWHEEL POWER PRESS [LOCATED IN PAWTUCKET, RI]

638 FEDERAL 22 TON OBI FLYWHEEL SINGLE CRANK POWER PRESS [LOCATED IN PAWTUCKET, RI]

639 SWECO 5 CUBIC FOOT BATCH TYPE VIBRATORY FINISHING MILL [LOCATED IN PAWTUCKET, RI]

640 EG&G DIGITAL READOUT CONTROL BOX [LOCATED IN PAWTUCKET, RI]

641 NIAGARA C-FRAME PRESS - 43 TON [LOCATED IN PAWTUCKET, RI]

642 DENNISON MIDGET C-FRAME BENCH MODEL HYDRAULIC PRESS [LOCATED IN PAWTUCKET, RI]

643 STANDARD NO. 5 J.A. POWER PUNCH PRESS [LOCATED IN PAWTUCKET, RI]

644 PERKINS 22 TON GAP FRAME FLYWHEEL POWER PRESS [LOCATED IN PAWTUCKET, RI]

645 PERKINS 15 TON GAP FRAME FLYWHEEL SINGLE CRANK POWER PRESS [LOCATED IN PAWTUCKET, RI]

646 BLISS 45 TON 0BI SINGLE CRANK FLYWHEEL POWER PRESS [LOCATED IN PAWTUCKET, RI]

647 VAMCO ACF3, S/N: OP3S4515D104L [LOCATED IN PAWTUCKET, RI]

648 VAMCO ACF3, EQUIPT WITH CONTROL BOX FOR READOUT FOR FEED LENGTH S/N: OP3S4515D110L [LOCATED IN PAWTUCKET, RI]

649 VAMCO ACF3, S/N: OP3S451590L [LOCATED IN PAWTUCKET, RI]

650 PERKINS MDL 22-SN 22 TON GAP FRAME FLYWHEEL POWER PRESS, HIGH SPEED [LOCATED IN PAWTUCKET, RI]

651 BLISS POWER PRESS WITH DIE SET 110V LESS SAFETY GUARD [LOCATED IN PAWTUCKET, RI]

652 V&O 25 TON OBI FLYWHEEL SINGLE CRANK POWER PRESS [LOCATED IN PAWTUCKET, RI]

653 PRESS RITE 10 TON OBI SINGLE CRANK FLYWHEEL POWER PRESS [LOCATED IN PAWTUCKET, RI]

654 V&O 25 TON STRAIGHT SIDE HIGH SPEED POWER PRESS [LOCATED IN PAWTUCKET, RI]

655 FABRICATED MOTORIZED STRIP CHOPPER BACK FLYWHEEL [LOCATED IN PAWTUCKET, RI]

656 V&O PARTSMASTER 25 TON STRAIGHT SIDE SINGLE CRANK POWER PRESS [LOCATED IN PAWTUCKET, RI]

657 ROUSELLE 25 TON OBI SINGLE CRANK FLYWHEEL POWER PRESS [LOCATED IN PAWTUCKET, RI]

Page 22Printed:03/13/2017 09:05







658 BLISS 60 TON OBI SINGLE CRANK FLYWHEEL POWER PRESS [LOCATED IN PAWTUCKET, RI]

659 L&J 18 TON OBI POWER PUNCH PRESS, STRAIGHT SIDE, ROLL FEED [LOCATED IN PAWTUCKET, RI]

660 ALVA ALLEN 2 TON FIXED BED SINGLE CRANK POWER PRESS [LOCATED IN PAWTUCKET, RI]

661 BROWN & SHARPE UNIVERSAL MILL [LOCATED IN PAWTUCKET, RI]

662 REVENT PROOFER MDL PRO 20220 SERIES 4 RACK FILTER AIR WASH SYSTEM OUTSIDE DIMENSIONS 60" X 67" X 92"/INSIDE DIMENSIONS 52" X 60" X 73.5" [LOCATED IN PAWTUCKET, RI]

663 BROWN & SHARPE UNIVERSAL TOOL & CUTTER GRINDER [LOCATED IN PAWTUCKET, RI]

664 NICCO SURFACE GRINDER WITH 11" X 24" MAGNETIC CHUCK [LOCATED IN PAWTUCKET, RI]

665 GAMBIN UNIVERSAL HEAVY DUTY MILLING MACHINE WITH ANILAM 3-AXIS DRO [LOCATED IN PAWTUCKET, RI]

666 BROWN & SHARPE 6" X 18" FULL HYDRAULIC TABLE SURFACE GRINDER [LOCATED IN PAWTUCKET, RI]

667 K.O. LEE 6 X 18 HYDRAULIC SURFACE GRINDER [LOCATED IN PAWTUCKET, RI]

668 HARTFORD 8"x18" HYDRAULIC TABLE SURFACE GRINDER [LOCATED IN PAWTUCKET, RI]

669 ALTOR 5" x 3-1/2" POWER ROLLING MILL FOR PLATE [LOCATED IN PAWTUCKET, RI]

670 DUAL INCLINED POWER ROLLING MILLS FOR PLATE [LOCATED IN PAWTUCKET, RI]

671 STEFOR MDL 1000 VERTICAL ROTARY SURFACE GRINDER [LOCATED IN PAWTUCKET, RI]

672 DREHER MDL VT-5VT-5 BARREL HORIZONTAL TUMBLING FINISHING MACHINE [LOCATED IN PAWTUCKET, RI]

673 ANTIQUE HOWES SCALE RUTLAND - BT.NO8 PATENT 8/20/1867 (1870 MODEL) [LOCATED IN PAWTUCKET, RI]

674 WELL-BUILT 12 TON CAPACITY HYDRAULIC H-FRAME SHOP PRESS [LOCATED IN PAWTUCKET, RI]

675 OTC 17 1/2 TON OPEN THROAT H-FRAME HAND HYDRAULIC SHOP PRESS [LOCATED IN PAWTUCKET, RI]

676 K.R. WILSON 25 TON H-FRAME HAND HYDRAULIC SHOP PRESS [LOCATED IN PAWTUCKET, RI]

677 EDM CHARMILLES ELERODA DL [LOCATED IN PAWTUCKET, RI]

678 MDL 2223 CLAUSING DRILL PRESS MODIFIED [LOCATED IN PAWTUCKET, RI]

679 GREENERD HYDRAULIC C FRAME PRESS, 6 POSITION TURRET TABLE [LOCATED IN PAWTUCKET, RI]

680 WATERBURY FARREL 9" x 5" 2 HIGH POWER ROLLING MILL FOR PLATE [LOCATED IN PAWTUCKET, RI]

681 TOS MDL 1UD CYLINDRICAL OD GRINDING MACHINE, FOR INTERNAL & EXTERNAL GRINDING; 17° SWIVEL OF TABLE; EQUIPT WITH 3 JAW CHUCK S/N: 0210267 V220/3/60[LOCATED IN PAWTUCKET, RI]

Page 23Printed:03/13/2017 09:05







682 SANFORD MDL MG 5" x 10" HAND OPERATED SURFACE GRINDER [LOCATED IN PAWTUCKET, RI]

683 K O LEE 6" x 18" HAND OPERATED GRINDER [LOCATED IN PAWTUCKET, RI]

684 TORIT CABINET DUST COLLECTOR [LOCATED IN PAWTUCKET, RI]

685 PRESSURE BLAST 20" x 20" FLOOR MODEL SAND BLAST CABINET [LOCATED IN PAWTUCKET, RI]

686 POWERMATIC 15" FLOOR MODEL DRILL PRESS [LOCATED IN PAWTUCKET, RI]

687 DELTA 6-SPINDLE DRILL PRESS ON CAST IRON STAND AND TABLE [LOCATED IN PAWTUCKET, RI]

688 V & O MDL #2 POWER PRESS, WITH MODEL A-2 AIR FEED, S/N: 202-516 [LOCATED IN PAWTUCKET, RI]

689 NIAGARA MDL. A22 22 TON CAPACITY OBI FLYWHEEL POWER STAMPING PRESS [LOCATED IN PAWTUCKET, RI]

690 NEIHOFF 21 PASS FINE WIRE DRAW MACHINE [LOCATED IN PAWTUCKET, RI]

691 F. LLI GIACETTI MDL FLG 27 VERTICAL STYLE CONTINUOUS CASTING MACHINE [LOCATED IN PAWTUCKET, RI]

692 PETER KOCH INDUCTION HORIZONTAL CONTINUOUS CASTING MACHINE [LOCATED IN PAWTUCKET, RI]

693 LOT OF GRAPHITE CONSUMABLES FOR CASTING [LOCATED IN PAWTUCKET, RI]

694 FIOA FILTRATION UNIT [LOCATED IN PAWTUCKET, RI]

695 SAND BLASTING CABINET WITH RECLAIMING UNIT [LOCATED IN PAWTUCKET, RI]

696 SOUTH BEND DYNABLAST 40" x 30" x 40" SANDBLASTING CABINET WITH DUST COLLECTOR [LOCATED IN PAWTUCKET, RI]

697 TORIT CABINET DUST COLLECTOR [LOCATED IN PAWTUCKET, RI]

698 AAF ARRESTALL BAG HOUSE SHAKER DUST COLLECTOR [LOCATED IN PAWTUCKET, RI]

699 HARDINGE HSL LATHE, S/N: 5C-4726-T [LOCATED IN PAWTUCKET, RI]

700 CLAUSING/COLCHESTER 18" x 80" GEARED HEAD ENGINE LATHE WITH EXTRA JAWS, 4-CHUCKS, EXTRA SET OF TOOL HOLDERS (NEW - 1996) LOCATED IN PAWTUCKET, RI]

701 NEIHOFF MDL M5 21 PASS FINE WIRE DRAW MACHINE [LOCATED IN PAWTUCKET, RI]

702 NEIHOFF MDL M5 21 PASS FINE WIRE DRAW MACHINE [LOCATED IN PAWTUCKET, RI]

703 NIKKEN 12-1/2" 4th AXIS HORIZONTAL/VERTICAL CNC ROTARY TABLE [LOCATED IN PAWTUCKET, RI]

704 BRIDGEPORT 1-1/2 HP 3-PHASE MILLING MACHINE - HEADOFF NOT ASSEMBLED FROM LESTAGE MFG. N. ATTLEBORO [LOCATED IN PAWTUCKET, RI]

705 BRIDGEPORT 1 HP 8-SPEED RAM TYPE VERTICAL TURRET MILLING MACHINE WITH TRAK 2-AXIS DRO [LOCATED IN PAWTUCKET, RI]

706 BRIDGEPORT 1-1/2 HP VERTICAL RAM TYPE TURRET MILLING MACHINE WITH ANILAM DRO, WITH POWER FEED [LOCATED IN PAWTUCKET, RI]

Page 24Printed:03/13/2017 09:05







707 BRIDGEPORT 1 HP VERTICAL MILLING HEAD ON KBC BASE [LOCATED IN PAWTUCKET, RI]

708 BIRMINGHAM VARIABLE SPEED RAM TYPE VERTICAL TURRET MILLING MACHINE WITH DRO & POWER FEED [LOCATED IN PAWTUCKET, RI]

709 BRIDGEPORT MILLING MACHINE 2HP WITH DRO, S/N: 416270286W [LOCATED IN PAWTUCKET, RI]

710 SOUTHBEND MDL CL185B 14 1/2" X 24" 1 ENGINE LATHE, S/N: 3853FKL17 [LOCATED IN PAWTUCKET, RI]

711 MDL 1927 LOGAN LATHE (NO TAIL STOCK) [LOCATED IN PAWTUCKET, RI]

712 HARDINGE LATHE WITH WELDED STEEL CABINET STAND [LOCATED IN PAWTUCKET, RI]

713 ACRA TURN 1340 13"x40" LATHE (inch/metric) with 4 JAW CHUCK, 2 STEADY RESTS & FOLLOW REST [LOCATED IN PAWTUCKET, RI]

714 NARDINI MDL ND-1560E 15"x60" GAP BED LATHE (inch/metric) [LOCATED IN PAWTUCKET, RI]

715 15 1/2" X 54" MONARCH GEARED HEAD ENGINE LATHE [LOCATED IN PAWTUCKET, RI]

716 ROCKWELL DELTA 14" x 41" TOOL ROOM LATHE WITH FLAME HARDENED BED, S/N: 1368221 [LOCATED IN PAWTUCKET, RI]

717 SUNNEN MDL. MBB1800 PRECISION HORIZONTAL HONING MACHINE [LOCATED IN PAWTUCKET, RI]

718 ELOX EDM TYPE: 6-1608; S/N: 004428; CONTROL TYPE: B255SB; V208; 3 PHASE; 60 CYCLE [LOCATED IN PAWTUCKET, RI]

719 HANSVELT MDL SM-150B ELECTRIC DISCHARGE MACHINE [LOCATED IN PAWTUCKET, RI]

720 CHEVALIER FALCON MDL ED-203 30 AMP DIE SINKER ELECTRIC DISCHARGE MACHINE (NEW - 1996) [LOCATED IN PAWTUCKET, RI]

721 NILSON MDL #0 WIRE FORMING FOUR SLIDE MACHINE W/ WIRE STRAIGHTNER TOOL FOR FUSION PINS [LOCATED IN PAWTUCKET, RI]

722 DENVER UNIVERSAL TOOL & CUTTER GRINDER [LOCATED IN PAWTUCKET, RI]

723 BRIDGEPORT 6" SWIVEL MILLING VISE [LOCATED IN PAWTUCKET, RI]



726 BROWN & SHARPE 8" MILLING VISE [LOCATED IN PAWTUCKET, RI]


728 6" BUCK MILLING VISE [LOCATED IN PAWTUCKET, RI]

729 BRIDGEPORT 6" 360° SWIVEL MILLING VISE [LOCATED IN PAWTUCKET, RI]




733 6" KURT MILLING VISE [LOCATED IN PAWTUCKET, RI]

Page 25Printed:03/13/2017 09:05







734 6" BRIDGEPORT SWIVEL MILLING VISE [LOCATED IN PAWTUCKET, RI]

735 6" BUCK MILLING VISE [LOCATED IN PAWTUCKET, RI]


737 HEAVY DUTY 9" INDUSTRIAL MILLING VISE [LOCATED IN PAWTUCKET, RI]

738 HEAVY DUTY 9" INDUSTRIAL MILLING VISE [LOCATED IN PAWTUCKET, RI]

739 MILLING MACHINE OVER ARM ATTACHMENT [LOCATED IN PAWTUCKET, RI]

740 55 GALLON DRUM HAND TRUCK [LOCATED IN PAWTUCKET, RI]

741 55 GALLON DRUM HAND TRUCK [LOCATED IN PAWTUCKET, RI]

742 MUBEA 8" HAND OPERATED, LEVER OPERATED SHEAR [LOCATED IN PAWTUCKET, RI]

743 ELEPHANT 8" HAND OPERATED, LEVER OPERATED SHEAR [LOCATED IN PAWTUCKET, RI]

744 ACCU-FINISH SERIES 2 100V CARBIDE GRINDER TILTING TABLE [LOCATED IN PAWTUCKET, RI]

745 DOUBLE END POLISHER 7 1/2 HP DOYISTON MFG [LOCATED IN PAWTUCKET, RI]

746 DOUBLE END PEDESTAL GRINDER, MODEL 12707 HP 3/4 3450 RPM [LOCATED IN PAWTUCKET, RI]

747 ROCKWELL DOUBLE END PEDAL GRINDER 100V, 1/2HP, 3650 RPM [LOCATED IN PAWTUCKET, RI]

748 BARREL HAND TRUCK [LOCATED IN PAWTUCKET, RI]

749 ROCKWELL/DELTA 28 3X5 20" VERTICAL WOOD/METAL VARIABLE SPEED BANDSAW [LOCATED IN PAWTUCKET, RI]

750 DO-ALL 12"x16" AUTOMATIC CUT-OFF AUTOMATIC HORIZONTAL BAND SAW [LOCATED IN PAWTUCKET, RI]

751 1/2" METAL BANDING & STRAPPING TOOL [LOCATED IN PAWTUCKET, RI]

752 500 GALLON POLYPRO VIBRATORY CHEMICAL SEPARATE TANKS [LOCATED IN PAWTUCKET, RI]

753 500 GALLON POLYPRO VIBRATORY CHEMICAL SEPARATE TANKS [LOCATED IN PAWTUCKET, RI]

754 BARRETT 26" CENTRIFUGAL SPINNER/OIL EXTRACTOR [LOCATED IN PAWTUCKET, RI]

755 RIGID MDL. 801 PIPE THREADER 2-1/2" PIPE, 1/2 HP MOTOR [LOCATED IN PAWTUCKET, RI]

756 AAF ARRESTALL MDL. AR-35 BAG HOUSE SHAKER TYPE DUST COLLECTOR [LOCATED IN PAWTUCKET, RI]

757 TORIT DUST COLLECTOR ON STAND [LOCATED IN PAWTUCKET, RI]

758 TORIT MDL T-2000 DUST COLLECTOR WITH DUCTWORK [LOCATED IN PAWTUCKET, RI]

759 TORIT MDL T-2000 DUST COLLECTOR WITH DUCTWORK [LOCATED IN PAWTUCKET, RI]

760 HARRIS MACHINERY 8" ABRASIVE CUT-OFF SAW [LOCATED IN PAWTUCKET, RI]

Page 26Printed:03/13/2017 09:05







761 12" ABRASIVE CUT-OFF SAW WITH BALDOR MOTOR [LOCATED IN PAWTUCKET, RI]

762 KBC 11" COLD CUT OFF / 45 DEGREE MITER CUTTING SAW WITH COOLANT PUMP [LOCATED IN PAWTUCKET, RI]

763 STARTRITE MDL CF315 12" MITERING COLD SAW [LOCATED IN PAWTUCKET, RI]

764 DO-ALL MDL ML 16" VERTICAL METAL CUTTING BAND SAW [LOCATED IN PAWTUCKET, RI]

765 MITSUBISHI MDL FG25 FORKLIFT TRUCK, 5000LBS CAPACITY, LPG, PNEU TIRES [LOCATED IN PAWTUCKET, RI]

766 DATSUN MDL #CF01A15B 3200LB CAPACITY LPG RIDE ON FORK LIFT TRUCK [LOCATED IN PAWTUCKET, RI]

767 AIR COMPRESSOR TANK 150 GALLON W/200 PSI GAUGE MAX [LOCATED IN PAWTUCKET, RI]

768 MDL SER AIR COMPRESSOR, 1.5 GALLON TANK, 1 1/2HP [LOCATED IN PAWTUCKET, RI]

769 COMPAIR MDL #705PSGS06-233CD140; CLASSIC 05 HYDROVANE AIR COMPRESSOR,S/N: 705-003022 [LOCATED IN PAWTUCKET, RI]

770 JOY TWISTAIR MDL #TA-015TAN2D; 1 HP ROTARY SCREW AIR COMPRESSOR [LOCATED IN PAWTUCKET, RI]

771 A&M AIR COMPRESSOR [LOCATED IN PAWTUCKET, RI]

772 DREHER 10 BARREL TUMBLER FINISHING MACHINE WITH SIX 22 LITER BARRELS AND 2 STAINLESS STEEL MEDIA DUMPS [LOCATED IN PAWTUCKET, RI]

773 THERMOLYNE SYBRON MDL F-A1638-1 FURNACE, SERIES 86-3502, MAX TEMP 2200· [LOCATED IN PAWTUCKET, RI]

774 ACE MDL A-27 DUST COLLECTOR, 30 GALLON DRUM [LOCATED IN PAWTUCKET, RI]

775 DIACRO 12" HAND OPERATED SHEET METAL SHEAR ON STAND [LOCATED IN PAWTUCKET, RI]

776 HABERLE 2 SPINDLE TUBE DEBURRING MACHINE [LOCATED IN PAWTUCKET, RI]

777 DIACRO 12" HAND OPERATED SHEET METAL SHEAR [LOCATED IN PAWTUCKET, RI]

778 MARIO DI MAIO (MDM) HAND OPERATED SLITTER [LOCATED IN PAWTUCKET, RI]

779 SEIT WATER CIRCULATION TANK - MADE OF GALVANIZED STEEL - 220V / SINGLE PHASE, 50/60Hz [LOCATED IN PAWTUCKET, RI]

780 TOP LOAD D-GREASER PARTS WASHER [LOCATED IN PAWTUCKET, RI]

781 TOP LOAD D-GREASER PARTS WASHER [LOCATED IN PAWTUCKET, RI]

782 MILLER 300 AMP ARC WELDER POWER SUPPLY [LOCATED IN PAWTUCKET, RI]

783 STARCHOPPER TYPE KL 1/3HP/1725RPM/CYCLE 60 V115/230 [LOCATED IN PAWTUCKET, RI]

784 LINCOLN AC 225 AMP LINCWELDER/ARC WELD CODE 7050-203 [LOCATED IN PAWTUCKET, RI]

785 INDUSTRIAL HEAVY DUTY DIE CUTTER WITH ENTRANCE & EXIT TABLES [LOCATED IN PAWTUCKET, RI]

786 MEUSER MDL M30R 5'x9" RADIAL ARM DRILL [LOCATED IN PAWTUCKET, RI]

Page 27Printed:03/13/2017 09:05







787 AUTOMATED FINISHING 1.5 CUBIC FOOT VIBRATORY FINISHING MACHINE [LOCATED IN PAWTUCKET, RI]

788 LOT OF TWO (2) 1.5 CUBIC FT VIBRATORY FINISHING MACHINE [LOCATED IN PAWTUCKET, RI]

789 ROAM HI-ENERGY FINISHING MACHINE FOR WET OR DRY JEWELRY PARTS/FINISHING APPLICATIONS [LOCATED IN PAWTUCKET, RI]

790 TOREX VIBRATORY FINISHING MACHINE 3 CUBIC FEET [LOCATED IN PAWTUCKET, RI]

791 RECTANGULAR VIBRATORY FINISHING MACHINE [LOCATED IN PAWTUCKET, RI]

792 RAWYLER 6" CUT OFF SAW WITH COOLENT PUMP [LOCATED IN PAWTUCKET, RI]

793 CONTENTI 18" 3-POST RUBBER MOLD VULCANIZER [LOCATED IN PAWTUCKET, RI]

794 MEMCO INDUCTO-VAC SOLID STATE CASTING SYSTEM WITH CHILLER [LOCATED IN PAWTUCKET, RI]

795 MULTIHERTZ MAGNUM DIGITAL 350 CENTRIFUGAL CASTING MACHINE WITH EXTRA PARTS [LOCATED IN PAWTUCKET, RI]

796 TWIN HYDRAULIC M1 PRESS 24"x35" PLATENS [LOCATED IN PAWTUCKET, RI]

797 R & S INDUSTRIAL HEAVY DUTY DIE CUTTER, WITH INFEED & EXIT/OUTFEED ROLLER TABLE [LOCATED IN PAWTUCKET, RI]

798 COSMOS/KABAR RF 27' THROAT C FRAME HEAT / BAR SEALING PLATEN PRESS [LOCATED IN PAWTUCKET, RI]

799 H. TSCHUDIN MDL. HTG600 SWISS UNIVERSAL O.D. PRECISION CYLINDRICAL GRINDER, [LOCATED IN PAWTUCKET, RI]

800 H. TSCHUDIN MDL. HTG600 SWISS UNIVERSAL O.D. PRECISION CYLINDRICAL GRINDER [LOCATED IN PAWTUCKET, RI]

801 VAN NORMAN MDL. 22L 10" X 45" UNIVERSAL MILLING MACHINE [LOCATED IN PAWTUCKET, RI]

802 PNEUMATIC LIFT MDL. 2DA-40 GRAVITY DROP HAMMER DUAL ACTION PRESS [LOCATED IN PAWTUCKET, RI]


804 MDL. 4DA PNEUMATIC DOUBLE ACTION DROP HAMMER [LOCATED IN PAWTUCKET, RI]


806 E.A. ADAMS MDL. 3 HAND OPERATED SCREW / FLY PRESS [LOCATED IN PAWTUCKET, RI]

807 E.A. EDDY MDL. 2-1/2 HAND OPERATED FLOOR MODEL SCREW / FLY PRESS [LOCATED IN PAWTUCKET, RI]

808 E.A. EDDY MDL. 2 HAND OPERATED FLY / SCREW PRESS [LOCATED IN PAWTUCKET, RI]

809 5 TON CAPACITY HAND OPERATED BRIDGE TYPE SCREW PRESS [LOCATED IN PAWTUCKET, RI]

810 E.A. ADAMS MDL. 2 DOUBLE FLY WHEEL SCREW PRESS, WITH DOUBLE COUNTER WEIGHT [LOCATED IN PAWTUCKET, RI]

Page 28Printed:03/13/2017 09:05







811 UNITED MACHINE 7 TON CAPACITY HEAVY DUTY FOOT PRESS [LOCATED IN PAWTUCKET, RI]

812 CHAPMAN 7 TON CAPACITY HEAVY DUTY FOOT PRESS [LOCATED IN PAWTUCKET, RI]

813 ADAMS MDL. 1 FLOOR MODEL FOOT PRESS [LOCATED IN PAWTUCKET, RI]

814 CHAS. A. HONES MDL. 160 GAS FIRED MELTING POT / BUZZER [LOCATED IN PAWTUCKET, RI]

815 CHAS. A. HONES MDL. 160 GAS FIRED MELTING POT / BUZZER [LOCATED IN PAWTUCKET, RI]

816 CHAS. A. HONES MDL. 160 GAS FIRED MELTING POT / BUZZER (NO HOOD) [LOCATED IN PAWTUCKET, RI]

817 FENN 7 TON CAPACITY DOUBLE PLUNGER TRANSFER PRESS [LOCATED IN PAWTUCKET, RI]


819 STANDARD 7 TON CAPACITY DOUBLE PLUNGER TRANSFER PRESS [LOCATED IN PAWTUCKET, RI]

820 STANDARD MDL. 5S DOUBLE PLUNGER TRANSFER PRESS [LOCATED IN PAWTUCKET, RI]

821 PERKINS MDL. 2AATE DOUBLE PLUNGER TRANSFER PRESS [LOCATED IN PAWTUCKET, RI]





826 PERKINS MDL. 3AA5RPM86 DOUBLE PLUNGER TRANSFER PRESS [LOCATED IN PAWTUCKET, RI]




830 FARGO MDL. HDP825-LC PROFESSIONAL SERIES ID CARD PRINTER [LOCATED IN PAWTUCKET, RI]

831 FARGO HDP820-LC PROFESSIONAL SERIES ID CARD PRINTER [LOCATED IN PAWTUCKET, RI]



834 RIDDING MIDIFORM 100, 8 SLIDE MULTI SLIDE MC [LOCATED IN PAWTUCKET, RI]



Page 29Printed:03/13/2017 09:05








838 8 STATION POLISHING BENCH [LOCATED IN PAWTUCKET, RI]

839 NEW ENGLAND UTILITY OVEN [LOCATED IN PAWTUCKET, RI]

840 KUGAL-MULLER 9" VERTICAL GRINDING MACHINE [LOCATED IN PAWTUCKET, RI]

841 CRYSTAL MANU SEIKI COLD HEADER TOOLED FOR .027 DOUBLE BULLET POST [LOCATED IN PAWTUCKET, RI]

842 CRYSTAL MANU SEIKI COLD HEADER TOOLED FOR .027 SINGLE [LOCATED IN PAWTUCKET, RI]

843 U.S. BAIRD TYPE MODEL #0 FOUR SLIDE TOOLED FOR SMALL HOOP EARRINGS [LOCATED IN PAWTUCKET, RI]

844 CRYSTAL MANU SEIKI THREAD ROLLER & COLD HEADER TOOLED FOR BRASS TIE TACS [LOCATED IN PAWTUCKET, RI]

845 CRYSTAL MANU SEIKI THREAD ROLLER & COLD HEADER TOOLED FOR .027 DOUBLE HEAD POST (BROKEN ARM CONTROL) [LOCATED IN PAWTUCKET, RI]

846 CRYSTAL MANU SEIKI THREAD ROLLER & COLD HEADER TOOLED FOR BRASS TIE TACS WITH LEDGE [LOCATED IN PAWTUCKET, RI]

847 AUTOMATED PACKAGING SYSTEMS H100 BAGGING MACHINE [LOCATED IN PAWTUCKET, RI]

848 MARIO DI MAIO MDM PRESS - HYDRAULIC POINTING PRESS - NEEDS WORK [LOCATED IN PAWTUCKET, RI]

849 FIOA QUENCH ANNEALING FURNACE [LOCATED IN PAWTUCKET, RI]

850 CMC 185 HYDRAULIC PRESS - 150 TON - NEEDS WORK [LOCATED IN PAWTUCKET, RI]

851 PORTABLE HAND OPERATED HYDRAULIC CRANE - ESTIMATED 20 TONS [LOCATED IN PAWTUCKET, RI]

852 JOSEPH RHODES MDL. #3 BACK FLYWHEEL POWER PRESS [LOCATED IN PAWTUCKET, RI]

853 JOSEPH RHODES MDL. #3 BACK FLYWHEEL POWER PRESS [LOCATED IN PAWTUCKET, RI]

854 CRYSTAL MANU SEIKI MDL. AS 100 TOOLED FOR BRASS TIE TACS, S/N: 51102 [LOCATED IN PAWTUCKET, RI]

855 U.S. BAIRD TYPE MODEL #2 SIZE FOUR SLIDE TOOLED FOR MEDIUM SIZE HOOPS WITH ADDITIONAL TOOLING [LOCATED IN PAWTUCKET, RI]

856 BAIRD MDL. 2 FOUR SLIDE, TOOLED FOR MEDIUM SIZE HOOPS WITH ADDITIONAL TOOLING [LOCATED IN PAWTUCKET, RI]

857 MANVILLE MDL. #2 FOUR SLIDE TOOLED TO FORM LARGE HOOP EARRING WITH ADDITIONAL TOOLING [LOCATED IN PAWTUCKET, RI]

858 ABBONDIO VITARI HEADER [LOCATED IN PAWTUCKET, RI]

859 MCWILLIAMS POWER PATTERN ROLLING MILL FOR HOOP EARRINGS [LOCATED IN PAWTUCKET, RI]

860 SINGLE POST HEADER EQUIPT WITH FMC SYNTRON POWER PULSE BOWL FEEDER [LOCATED IN PAWTUCKET, RI]

861 PERKINS MDL. JR-E-6 3 TON 1" STROKE, BED AREA: 9 X 5-1/2 HEIGHT OVER BED 6", S/N# 39282 [LOCATED IN PAWTUCKET, RI]

Page 30Printed:03/13/2017 09:05







862 CRAFFORD AIR OPERATED LINK-O-MATIC LINK MAKING MACHINE [LOCATED IN PAWTUCKET, RI]

863 THOMPSON SURFACE GRINDER [LOCATED IN PAWTUCKET, RI]

864 TORNOS ICE DIAMOND CUTTING LATHE [LOCATED IN PAWTUCKET, RI]

865 TORNOS ICE DIAMOND CUTTING LATHE [LOCATED IN PAWTUCKET, RI]

866 ESCOMATIC / ROTOMATIC MDL. DS2 EAR POST MAKING MACHINE [LOCATED IN PAWTUCKET, RI]

867 ESCOMATIC MDL. D2S SINGLE SPINDLE SWISS AUTOMATIC SCREW MACHINE [LOCATED IN PAWTUCKET, RI]

868 PRESS RITE MDL. #1 INCLINABLE MECHANICAL FLYWHEEL PRESS - NO GUARD ON FLYWHEEL [LOCATED IN PAWTUCKET, RI]

869 PERKINS MDL. 10T OBI POWER PRESS 2" STROKE [LOCATED IN PAWTUCKET, RI]

870 PRESS RITE MDL. #1 INCLINABLE MECHANICAL FLYWHEEL PRESS - NO GUARD ON FLYWHEEL EQUIPT WITH RAM & 1" TABLE [LOCATED IN PAWTUCKET, RI]

871 FIOA SPIN DRYER 9" DIAMETER STAINLESS STEEL BASKET [LOCATED IN PAWTUCKET, RI]

872 KENCO MDL 151-151-200 POWER PRESS, S/N: 77-094 [LOCATED IN PAWTUCKET, RI]

873 GIACETTI INCLINABLE REAR FLYWHEEL PRESS - DAMAGED [LOCATED IN PAWTUCKET, RI]

874 J&L OPTICAL COMPARATOR [LOCATED IN PAWTUCKET, RI]

875 TAYLOR HOBSON ENGRAVING MACHINE [LOCATED IN PAWTUCKET, RI]

876 SCRIPTA SINGLE SPINDLE 1 TO 1 COPY MILLING MACHINE [LOCATED IN PAWTUCKET, RI]

877 SCRIPTA DOUBLE SPINDLE COPY MILL [LOCATED IN PAWTUCKET, RI]

878 INDUSTRIAL CHAIN MACHINE TOOLED FOR .020 X .080 JUMP RINGS WITH 3PH GEAR MOTOR [LOCATED IN PAWTUCKET, RI]

879 JOHNSON CRUCIBLE GAS MELTING FURNACE [LOCATED IN PAWTUCKET, RI]

880 SUNNEN MDL. MBB-1600 PRECISION HONING MACHINE [LOCATED IN PAWTUCKET, RI]

881 CONLEY TYPE 12" SPIN CASTING MACHINE [LOCATED IN PAWTUCKET, RI]

882 RILLO INCINERATOR/BURNER EQUIPT WITH 2 BLOWERS AND EXTRA BRICKS AND INSULLATION [LOCATED IN PAWTUCKET, RI]

883 KENT OWENS MDL. 1-14 HORIZONTAL PRODUCTION MILL [LOCATED IN PAWTUCKET, RI]

884 4-POST 12" PLATEN RUBBER MOLD VULCANIZER WITH 30 TON HYDRAULIC BOTTLE JACK, CONLEY TYPE [LOCATED IN PAWTUCKET, RI]

885 4-POST 12" PLATEN RUBBER MOLD VULCANIZER WITH 30 TON HYDRAULIC BOTTLE JACK, CONLEY TYPE [LOCATED IN PAWTUCKET, RI]

886 VAPOSOL VAPOR DEGREASER UNIT, INSIDE DIMENSIONS 36" x 6" x 32" DEPTH [LOCATED IN PAWTUCKET, RI]

Page 31Printed:03/13/2017 09:05







887 CRAFFORD ELECTRIC MDL. EL LINK-O-MATIC LINK MAKING MACHINE, LESS TOOLING [LOCATED IN PAWTUCKET, RI]

888 CRAFFORD MDL. M PNEUMATICALLY OPERATED LINK-O-MATIC LINK MAKING MACHINE, LESS TOOLING [LOCATED IN PAWTUCKET, RI]

889 CRAFFORD MDL. M PNEUMATICALLY OPERATED LINK-O-MATIC LINK MAKING MACHINE, PARTS MACHINE [LOCATED IN PAWTUCKET, RI]

890 COLZI MARTIN MDL. MEPP HOT THERMOFUSING MACHINE [LOCATED IN PAWTUCKET, RI]

891 PLATING TANK - POLYPROPYLENE - 2 BAY TANK [LOCATED IN PAWTUCKET, RI]

892 POLYPRO 55 GALLON CHEMICAL SYSTEM, WITH PUMP AND 4 BAY TANK [LOCATED IN PAWTUCKET, RI]

893 MIDWEST AIR PRODUCTS MDL. MW100 POLYPRO FILTRATION SYSTEM, 500 CFM, 3GPM [LOCATED IN PAWTUCKET, RI]

894 MATERIAL HANDLING ROLLER CONVEYOR (MDT), 9.5" WIDE ROLLERS [LOCATED IN PAWTUCKET, RI]

895 COMPLETE SCHULTHEISS SKF-33 INDUCTION MELTING SYSTEM TO PRODUCE 450 TO 500KG OF GRANULATED GOLD PER DAY - NEW (1998) [LOCATED IN PAWTUCKET, RI]

896 COMPLETE SCHULTHEISS SKF-33 INDUCTION MELTING SYSTEM TO PRODUCE 450 TO 500KG OF GRANULATED GOLD PER DAY - NEW (1998) [LOCATED IN PAWTUCKET, RI]

897 SCHULTHEISS MDL. SKF22 INDUCTION PRE-MELTING FURNACE [LOCATED IN PAWTUCKET, RI]

898 BARKER HORIZONTAL MILLING MACHINE WITH PNUMATIC TABLE FEED, QUICK LOCK 3SV VISE [LOCATED IN PAWTUCKET, RI]

899 16" x 30" 2-JAW 6-POSITION INDUSTRIAL TURRET LATHE WITH 4-POST TOOL POST, BED STOP, TURRRET TOOLING [LOCATED IN PAWTUCKET, RI]

900 SOUTH BEND MDL. CL170C 17" x 30" GEARED HEAD TURN-NADO ENGINE LATHE [LOCATED IN PAWTUCKET, RI]

901 JONES & LAMSON MDL. FC-14ER OPTICAL COMPARATOR WITH ACCURITE DRO [LOCATED IN PAWTUCKET, RI]

902 ELTEE PULSITRON MDL. TR20 ELECTRICAL DISCHARGE MACHINE/RAM TYPE DIE SINKER [LOCATED IN PAWTUCKET, RI]

903 INGERSOL-RAND 2-STAGE AIR COMPRESSOR TYPE 30 WITH 60 GALLON TANK [LOCATED IN PAWTUCKET, RI]

904 4" WIDE x 8" DIAMETER POWER ROLLING MILL FOR FLAT [LOCATED IN PAWTUCKET, RI]

905 2" WIDE x 6" DIAMETER POWER ROLLING MILL FOR FLAT [LOCATED IN PAWTUCKET, RI]

906 DUAL HEAD FOR HORIZONTAL & VERTICAL DIAMOND CUTS WITH SCOPE & 2 8"x6" WORK TABLES [LOCATED IN PAWTUCKET, RI]

907 POSALUX SET UP FOR COINS/MEDALLIONS WITH 2" INCLINABLE WORK HOLDER [LOCATED IN PAWTUCKET, RI]

908 POSALUX SET UP FOR SMALL FLATS, WITH 90 DEGREE ANGLE WORK VISE [LOCATED IN PAWTUCKET, RI]

Page 32Printed:03/13/2017 09:05







909 RAMPE MDL. COF-9 VI-BRADER VIBRATORY FINISHING MILL [LOCATED IN PAWTUCKET, RI]

910 JET MDL. JSG-612 6? x 12? HAND OPERATED SURFACE GRINDER [LOCATED IN PAWTUCKET, RI]

911 GRECO BROTHERS 30" x 24" STAINLESS STEEL HOT AIR DRYER, WITH 6 STAINLESS STEEL RACKS [LOCATED IN PAWTUCKET, RI]

913 CANON IMAGE MDL. IPF750 PROGRAF MFP LARGE FORMAT PRINTER [LOCATED IN PAWTUCKET, RI]

914 N. FERRERA 200 TON CAPACITY HYDRAULIC COINING PRESS FOR COINS, MEDALS AND MEDALLIONS [LOCATED IN PAWTUCKET, RI]

915 N. FERRERA 200 TON CAPACITY HYDRAULIC COINING PRESS FOR COINS, MEDALS AND MEDALLIONS [LOCATED IN PAWTUCKET, RI]

916 8' RARE ANTIQUE US MINT HENRY TROEMNER TYPE GOLD ASSAY BULLION BALANCE BEAM SCALE, NOTE: 96" HIGH X 8' LONG, 3,300 LBS [LOCATED IN PAWTUCKET, RI]

1101 E.A. EDDY KICK PRESS [LOCATED IN WARWICK, RI]

1102 E.A. ADAMS KICK PRESS [LOCATED IN WARWICK, RI]





1107 WILLIAMS KICK PRESS [LOCATED IN WARWICK, RI]


1109 McWILLIAMS KICK PRESS [LOCATED IN WARWICK, RI]

1110 H. LEACH KICK PRESS [LOCATED IN WARWICK, RI]

1111 ADAMS KICK PRESS [LOCATED IN WARWICK, RI]






1117 REYNOLDS KICK PRESS [LOCATED IN WARWICK, RI]


1119 LEACH KICK PRESS [LOCATED IN WARWICK, RI]





Page 33Printed:03/13/2017 09:05


















1135 ROYERSFORD #10 KICK PRESS [LOCATED IN WARWICK, RI]






1141 COOK #1A KICK PRESS [LOCATED IN WARWICK, RI]



1144 EDDY KICK PRESS [LOCATED IN WARWICK, RI]







1151 FASTI MDL. CZ06A MESH DOUBLE STITCH 200mm CHAIN MACHINE, WITH TURN TABLE, S/N: CZ182 (1998) [LOCATED IN WARWICK, RI]

1152 FASTI MDL. CZ06A MESH DOUBLE STITCH 200mm CHAIN MACHINE, WITH TURN TABLE, S/N: CZ214 (1998) [LOCATED IN WARWICK, RI]

1153 AREZZO ICM MDL. C13 DOUBLE CURB TOOLED FOR ROPE (MR/5 .005mm) WIRE CHAIN MACHINE, WITH TURN TABLE, ICM 97 CONTROL, S/N: 2393 (1998) [LOCATED IN WARWICK, RI]

Page 34Printed:03/13/2017 09:05












1159 A.G.I.P. IMA TYPE C-13 DOUBLE CURB TOOLED FOR MR/6 .0055mm WIRE ROPE CHAIN MACHINE, WITH TURN TABLE, S/N: 2099 (1993) [LOCATED IN WARWICK, RI]

1160 F.I.O.A. ICM DOUBLE CURB TOOLED FOR MR/5 .005 WIRE ROPE CHAIN MACHINE, WITH TURN TABLE, S/N: 0410 [LOCATED IN WARWICK, RI]

1161 F.I.O.A. ICM DOUBLE CURB TOOLED FOR MR/5 .005 WIRE ROPE CHAIN MACHINE, WITH TURN TABLE, S/N: 0409 [LOCATED IN WARWICK, RI]

1162 A.G.I.P. ICM TYPE C-13 DOUBLE CURB TOOLED FOR MR/5 .005mm WIRE ROPE CHAIN MACHINE, WITH TURN TABLE, S/N: 2088 (1993) [LOCATED IN WARWICK, RI]

1163 A.G.I.P. ICM TYPE C-13 DOUBLE CURB TOOLED FOR MR/6 .0055mm WIRE ROPE CHAIN MACHINE, WITH TURN TABLE, S/N: 1374 (1990) [LOCATED IN WARWICK, RI]

1164 BERTINO O.M.B.I. DOUBLE CURB WIRE ROPE CHAIN MACHINE, S/N: 184/80 [LOCATED IN WARWICK, RI]

1165 FASTI MDL. CZ06A STOCKING MESH HIGH SPEED CHAIN MACHINE - 6-NEEDLE EQUIPPED WITH AUTO CHAIN COLLECTING, 50/60 HZ, 3.2mm WIRE ROPE CHAIN MACHINE, S/N: CZ205 (1998) [LOCATED IN WARWICK, RI]




1169 FASTI MDL. CZ06A MESH HIGH SPEED CHAIN MACHINE, 6-NEEDLE, WITH AUTO CHAIN COLLECTING, 50/60 HZ, 2.0mm WIRE ROPE CHAIN MACHINE, S/N: CZ180 (1998) [LOCATED IN WARWICK, RI]


Page 35Printed:03/13/2017 09:05







1171 UPRIGHT CABLE MACHINE [LOCATED IN WARWICK, RI]

1172 FASTI MDL. C206A MESH SINGLE STITCH 2.0mm WIRE ROPE CHAIN MACHINE, WITH TURN TABLE, S/N: CZ168 (1997) [LOCATED IN WARWICK, RI]

1173 BECHTOLD CURB CHAIN MACHINE, S/N: 9146-274 [LOCATED IN WARWICK, RI]

1174 BECHTOLD CURB CHAIN MACHINE, S/N: 1964-374 [LOCATED IN WARWICK, RI]

1175 BERTINO OMBI CURB 0.80mm CHAIN MACHINE, S/N: 79/085 [LOCATED IN WARWICK, RI]

1176 BERTINO OMBI CURB 0.80mm CHAIN MACHINE, S/N: 79/084 [LOCATED IN WARWICK, RI]



1179 FASTI MDL. GE DOUBLE CABLE CURB WIRE ROPE MACHINE, WITH TURN TABLE, S/N: F12 [LOCATED IN WARWICK, RI]

1180 FASTI MDL. GU DOUBLE CABLE CURB CHAIN MACHINE, APPROXIMATELY 0.8mm SIZE, WITH TURN TABLE, S/N: 084 [LOCATED IN WARWICK, RI]

1181 FASTI MDL. GE DOUBLE CABLE CURB ROPE MACHINE, WITH TURN TABLE, S/N: F14 [LOCATED IN WARWICK, RI]

1182 FASTI MDL. GU DOUBLE CABLE CURB CHAIN MACHINE, APPROXIMATELY 0.8mm SIZE, WITH TURN TABLE, S/N: 163 [LOCATED IN WARWICK, RI]

1183 FASTI MDL. GE DOUBLE CABLE CURB ROPE MACHINE, WITH TURN TABLE, S/N: E88 [LOCATED IN WARWICK, RI]

1184 BECHTOLD SINGLE CURB ROPE MACHINE, S/N: 2173377 [LOCATED IN WARWICK, RI]

1185 LASERVALL MDL. JL15BASIC SISMA LASER UNITS, S/N: A119 (2000) [LOCATED IN WARWICK, RI]



1188 ADAMS #1A KICK PRESS [LOCATED IN WARWICK, RI]









Page 36Printed:03/13/2017 09:05







1197 CMC 230 TON CAPACITY UPACTING HYDRAULIC PRESS, 8" X 8" PLATEN SIZE [LOCATED IN WARWICK, RI]

1198 R.N.C. 12 TON CAPACITY PNEUMATIC C-FRAME PRESS, S/N: 12VSG/A2296 [LOCATED IN WARWICK, RI]

1199 R.N.C. 18 TON CAPACITY C-FRAME PRESS, S/N: 18V5C/A1418 [LOCATED IN WARWICK, RI]

1200 R.N.C. 20 TON CAPACITY PNEUMATIC C-FRAME PRESS, S/N: 20VSG-A2216 [LOCATED IN WARWICK, RI]

1201 R.N.C. 5 TON CAPACITY PNEUMATIC C-FRAME PRESS, S/N: 5VSG-A1458 [LOCATED IN WARWICK, RI]


1202A CABINET WITH ASSORTED TOOLING [LOCATED IN WARWICK, RI]

1202B CABINET WITH ASSORTED TOOLING [LOCATED IN WARWICK, RI]

1202C CABINET WITH ASSORTED TOOLING [LOCATED IN WARWICK, RI]

1203 LUNDWALL 2-1 /2 TON CAPACITY TRANSFER PRESS, S/N: 364 [LOCATED IN WARWICK, RI]






1209 EDDY #2 KICK PRESS [LOCATED IN WARWICK, RI]






1215 EDDY #1 KICK PRESS [LOCATED IN WARWICK, RI]

1216 STANDARD KICK PRESS [LOCATED IN WARWICK, RI]



1219 STANDARD #5 5 TON CAPACITY OBI PRESS [LOCATED IN WARWICK, RI]

1220 AMERICAN VIBRATORY BOWL FEEDER, 14" INSIDE DIAMETER BOWL DIMENSION [LOCATED IN WARWICK, RI]

1221 AMERICAN VIBRATORY BOWL FEEDER, 14" INSIDE DIAMETER BOWL DIMENSION [LOCATED IN WARWICK, RI]

Page 37Printed:03/13/2017 09:05







1222 MITUTOYO TYPE PJ-300 PROFILE OPTICAL COMPARATOR, S/N: N/A [LOCATED IN WARWICK, RI]

1223 PERKINS APPROXIMATELY 10 TON CAPACITY OBI PRESS [LOCATED IN WARWICK, RI]

1224 PRESS-RITE #2 10 TON CAPACITY OBI PRESS [LOCATED IN WARWICK, RI]

1225 P.B. 3/8" BEAD ROLLER, 393-373 [LOCATED IN WARWICK, RI]

1226 FASTI (ITALY) MDL. SB05 BALL/BEAD MAKING MACHINE FROM TUBING, S/N: 5B-025 (2000) [LOCATED IN WARWICK, RI]

1227 MGZ(ITALY) BALL/BEAD ROLLING MACHINE [LOCATED IN WARWICK, RI]

1228 NILSON MDL. 700-L 1/32" CAPACITY 4-SLIDE, S/N: 104110 (1978) [LOCATED IN WARWICK, RI]

1229 FERRARA MDL. HY300T-SUS 300 TON CAPACITY UPACTING HYDRAULIC PRESS, 10" RIGHT TO LEFT X 14" FRONT TO BACK PLATEN SIZE, 10HP MOTOR, CONTROLS, S/N: 187/99/10HP (1999) [LOCATED IN WARWICK, RI]

1230 FERRARA MDL. NFHY650T-S-US 650 TON CAPACITY UPACTING HYDRAULIC PRESS, 14-1/2" RIGHT TO LEFT X 20" FRONT TO BACK PLATEN SIZE, 10HP MOTOR, S/N: 172/99/10HP (1999) [LOCATED IN WARWICK, RI]



1233 ROYERSFORD KICK PRESS [LOCATED IN WARWICK, RI]

1234 MGZ(ITALY) BALL/BEAD ROLLING MACHINE, WITH BOWL FEEDER [LOCATED IN WARWICK, RI]

1235 GARDNER DENVER COOPER MDL. EBERGD 30HP ROTARY SCREW TYPE AIR COMPRESSOR, TANK MOUNTED, S/N: M66364 [LOCATED IN WARWICK, RI]

1236 BEAD ROLLER MACHINE [LOCATED IN WARWICK, RI]

1237 MGZ(ITALY) LARGE BALL/BEAD MAKING MACHINE MOD MGZ50 50/60 CYCLE [LOCATED IN WARWICK, RI]

1238 BEAD/BALL ROLLING MACHINE, TOOLED FOR 14K 3mm FINISH ONLY [LOCATED IN WARWICK, RI]

1239 ESCOMATIC SWISS SCREW MACHINE (MISSING PARTS) [LOCATED IN WARWICK, RI]

1240 WARREN SLITTING MACHINE & TABLE [LOCATED IN WARWICK, RI]

1241 OTEC MDL. CF3X18 FINISHING MACHINE, WITH 12" DIAMETER BOWLS, S/N: 318/00-0207 (2000) [LOCATED IN WARWICK, RI]

1242 OTEC MDL. RND081 3-BARREL FINISHING MACHINE, 1700 RPM, WITH BALTEC CONTROL, S/N: 0811013 [LOCATED IN WARWICK, RI]

1243 BALTEC MDL. RND081 DUAL HEAD OPPOSING RIVETING MACHINE, 1700 RPM, WITH BALTEC CONTROL, S/N: 0810968 [LOCATED IN WARWICK, RI]

1244 APPROXIMATELY 5 TON CAPACITY OBI PRESS [LOCATED IN WARWICK, RI]

1245 [3] TOGGLE-AIRE MDL. S50T PNEUMATIC PRESSES [LOCATED IN WARWICK, RI]

Page 38Printed:03/13/2017 09:05







1246 [2] TOGGLE-AIRE APPROXIMATELY 1 TON CAPACITY PNEUMATIC PRESSES [LOCATED IN WARWICK, RI]

1247 L&J #18 18 TON CAPACITY OBI PRESS, WITH 2" STROKE, 2" SLIDE ADJUSTMENT, 7-1/2" SLIDE ADJUSTMENT, 18" RIGHT TO LEFT X 11-1/2" FRONT TO BACK PLATEN SIZE, DUAL PALM CONTROLS, AIR CLUTCH, S/N: 230654 [LOCATED IN WARWICK, RI]

1248 DUAL OPPOSING HEAD RIVETER [LOCATED IN WARWICK, RI]

1249 JORACO PNEUMATIC PRESS [LOCATED IN WARWICK, RI]

1250 SCHMIDT MDL. 36-17S-97 13,000# CAPACITY PNEUMATIC C-FRAME PRESS, WITH 2.3" STROKE, DUAL PALM CONTROLS, S/N: 2-1000 [LOCATED IN WARWICK, RI]

1251 NEWTRIC TYPE SN3U DUAL OPPOSING DRILLING HEADS, 3-1/2" STROKE, 150# THRUST, DUAL PALM CONTROLS, S/N: 980501 [LOCATED IN WARWICK, RI]

1252 LOT OF ASSORTED DIE SETS & TOOLING [LOCATED IN WARWICK, RI]




1256 SKID OF ASSORTED DIE SETS & TOOLING [LOCATED IN WARWICK, RI]

1257 [2] CABINETS OF ASSORTED TOOLING [LOCATED IN WARWICK, RI]





1262 CABINET WITH ASSORTED TOOLING [LOCATED IN WARWICK, RI]







1269 [4] SKIDS OF ASSORTED DIE SETS & TOOLING [LOCATED IN WARWICK, RI]





1274 LOT OF ASSORTED TOOLING [LOCATED IN WARWICK, RI]


Page 39Printed:03/13/2017 09:05









1278 HUBS/HOBS - LOT [LOCATED IN WARWICK, RI]

1279 HUBS/HOBS - LOT [LOCATED IN WARWICK, RI]

1280 LOT OF KICK PRESS TOOLING [LOCATED IN WARWICK, RI]






1286 FASTI (ITALY) MDL GU UNIVERSAL CURB/CABLE CHAIN MAKING MACHINE [LOCATED IN WARWICK, RI]

1287 FASTI (ITALY) MDL GU UNIVERSAL CURB/CABLE CHAIN MAKING MACHINE [LOCATED IN WARWICK, RI]

��

Documents

Catalog for Auction:Richline - goldmachinery.com · Catalog for Auction:Richline This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness,