CASE IH Steiger quadtrac

8/19/2019 CASE IH Steiger quadtrac

1/16

STEIGER® & QUADTRAC

394 - 548HP RATED POWER

433 - 602HP MAXIMUM POWER

321 hectares ploughed

in 24 hours

STX STEIGER


2/16

2

Low fuel consumptionfrom the world record holderOne tank of fuel is enough for up to 22

hours’ non-stop work. HID headlightsare available to turn night into day.

Power by traditionProven 12.9 litre and 14.9 litrecapacity six cylinder engines from394hp(CV) / 290 kW to 548 hp(CV) / 403 kW.All engines have four-valve technologyfor better performance and low fuelconsumption and offer torque rise of upto 40%.

Unbelievable manoeuvrability Articulation with an extremely widerange of movement: up to ± 13° framepivot angle about the longitudinal axishelps ensure constant good groundcontact and optimum weight distribution,

up to 42° frame articulation angle toright and left.

Keep it comingDesigned for maximum permanent loadwith an extremely torsion resistant,12mm steel frame, 115mm axle diameter,

special large planetary drive andreinforced bearings.

High lifting and pulling capacity - lowcompactionThree-point hitch with electronic slipcontrol: up to 8949kg continuous liftcapacity. Extremely heavy duty, centrepull adjustable drawbar. Optimum powertrain through long wheelbase chassis forideal weight distribution.

Awesome hydraulic powerHigh performance hydraulics: forsteering, auxiliary valves, power beyondport and three point hitch. Pressure-flow

compensated axial piston pump with151l/min or even 208l/min pumpcapacity available.

All-round visibility from the Surveyor™ cabExpansive areas of glass (6.3m2) for perfect visibility and an ergonomicoperator environment for maximum comfort. The tractor is fitted withautomatic air - conditioning, heated Optima™ seat with lumbar support

and a fully adjustable right armrest incorporating the most importantcontrols. Luxury version available with exclusive leather trim.

In total control at all timesErgonomic, modern controls: fullyadjustable steering column, electronicshifting, information display in the rightcab column. If required, withperformance monitor for full informationon all functions and maintenanceintervals.

Smart design -you are driving the flagship!Smart because it looks good andsmart because it helps you savetime and effort. The sloping hoodprovides easy access to the servicepoints from ground level, whilethe cab exterior is designed forsafe entry and exit.

LEADING THE INDUSTRY

AutoSkip™ shiftingfor smooth acceleration16x2 Powershift transmission: with ninegears in the central working range from5-13kph. AutoSkip™ shift will automaticallyskip gears when changing up and forrapid acceleration. Maximum speed of

37kph* helps ensure that a QUADTRAC orSTEIGER gets to work quickly.


3/16

3

Case IH has the perfect STEIGER andQUADTRAC Series for your operation.Choose from four major models rangingfrom 394 to 548 horsepower in Heavy-Duty wheeled, Scraper and QUADTRACversions.

THE WORLD RECORD HOLDER

More choice in the top power class. STEIGER and QUADTRAC tractors are tuned for

maximum performance and offer total ease of operation and cab comfort. This Series

offers large agricultural operations more choice than ever in the power class from

394hp(CV) / 290kW to 548 hp(CV) / 403kW: four models that differ not only in their

horsepower, but also in their technical conception, in three variants, making it possible

for every enterprise to decide which model best meets its requirements.

Based on the experience of 50 years of Steiger production at the Case IH facility in Fargo,North Dakota, the tradition of STEIGER tractors continues with two series.

STEIGER – the legendary articulated tractor. Four equally sized large wheels, four wheel

drive and a long wheelbase transfer all the power to the ground.

QUADTRAC - the flagship has four independently suspended crawler tracks and a 3.91m

wheelbase. Optimum traction and ground adjustment at all times with minimum ground

pressure make this the tractor for the heaviest ground conditions.

*) to comply with legislation and specification in your country

This Series from Case IH combines the tradition of the legendary

STEIGER tractors with the requirements of the 21st century.

No compromise large acreage technology for maximum productivity -as proven in the industry’s highest accolade: the 24 hour ploughing

World Record.


4/16

4

Largest cab in the industry Excellent visibility Classic Case IH ergonomics Intuitive instrument displays

Step in to the best cab on the market.

Light up even the darkest of nights withthe high intensity discharge (HID) light,available for the centre of the front grille.

1

2

3

4

5

6

8

9

10

11

12

14

13

7


5/16

5

CAB AND CONTROLS

A one-piece curved front windshield, ultra-narrow hood and slender steering column contribute to an exceptional view. The back

window has the same panoramic outlook to let you hook-up and watch the widest implements. Instrumentation in the right-hand A-

post is perfectly positioned at eye level to keep you informed. Monitor basic operating systems and track critical functions with the

advanced Performance monitor. The right-hand armrest control console can be fully adjusted to fit your chosen position. Intuitive

placement of controls reduces operator effort. The entire console moves with the air-suspension Optima seat, so you can find the

perfect position for the job. The new Surveyor cab has an estimated 75dB(A) sound level. For excellent night vision, the cab comes with

a standard lighting package that is much more than “standard”. With 55-watt lamps lighting the way, you’ll quickly see the difference

on your first night-shift. For those who like to run just as long after the sun goes down, a highintensity discharge (HID) light for the

centre of the grille is available.

Appreciate the panoramic productivity.When you’re driving a big tractor with bigimplements, you need a big cab with bigvisibility… to the front, sides and rear.That’s exactly what you get from thestunning Surveyor cab.

1 Vents to direct air flow2 Tilt and telescoping steering wheel

3 Shuttle lever

4 Carpeted mat

5 Optima air-suspension seat with lumbar support

6 Padded passenger seat with safety belt*

7 Armrest with throttle lever and hydraulic controls

8 A-post instrumentation and Performance monitor

9 One-piece tinted windshield

10 Elevated footrests

11 Front and rear windshield wipers

12 Six power outlets

13 Service window giving access to the right hand side

14 Front window step for cleaning windows or changing lights

*leather seat not offered in UK/ROI

Unmatched comfort and convenience.

Case IH equip the STEIGER and QUADTRAC tractors with the stunningSurveyor™ cab. From the expansive curved glass and forward sloping

hood to the comfortable Optima™ seat and ergonomic armrest controls,

the Surveyor cab creates the ultimate operator environment.


6/16


7/16

7

Click through the gears effortlesslyusing the electronic Powershift controlintegrated into the throttle.

The 16x2 Full Powershift transmissionfeatures an electronic control systemfor optimum shift quality.

Forward or reverse travel withoutusing the clutch by simply moving thePowershuttle lever.

Ready to run reliably.

At the heart of every STEIGER and QUADTRAC tractoris an engine designed to deliver maximum horsepower

with enhanced efficiency.

Electronically controlled engines in the STEIGER and QUADTRAC tractors ensure peak power growth without burning unnecessary fuel

for lower costs. Torque rise of up to 40 percent lets you get through tough spots without downshifting. Drawbar pull holds steady even

as conditions change in the field and torque peaks with 2563Nm at 1400rpm. When engine rpm drops under rated load, the engine

provides additional power to give you up to 54 more horsepower. With that kind of power growth, you have the boost you need to lug

through low spots and other difficult terrain. Perfect power transfer. The most important factor in a powershift is not the total number

of gears you have to choose from, but how many are in the primary working range. That’s where the 16-speed Full Powershift reallystands out with nine gears between 5 and 13kph. Depending on tyre size, this gives you 0.8kph speed splits in the working range - and

a better chance at finding the perfect speed for any job. The AutoSkip™ shift feature for the STEIGER and QUADTRAC tractors skips

automatically every other gear between 4 and 13 to help you get up to speed for faster transport. Pressing the Select Shift button on

the front of the throttle handle allows single shifts for more-precise speed choices — ideal for precision-farming operations. You can

also get from field to field faster with transport speeds up to 37kph* on the road.

*) to comply with legislation and specification in your country

ENGINE AND TRANSMISSION


8/16

8

Advanced electro-hydraulic controls putremote functions at your fingertips.

Up to nine remotes*. Four additionalvalves may be field installed

High lift capacity of up to 8949kg

PTO option available on every model

Up to five rear remotes can be factoryfitted. Four additional valves may be fieldinstalled.

A 1000rpm PTO assembly can be addedto any STEIGER and QUADTRAC.

Efficient power transfer to tow widerimplements


9/16

9

HYDRAULICS, PTO AND DRIVELINE

High performance hydraulics. The hydraul ic system of a STEIGER and QUADTRAC tractor provides power for steering, remotes, power

beyond, and the three-point hitch. A standard 151lpm (159lpm on QUADTRAC 535) pump relies on an efficient pressure-flow-

compensating (PFC) system that delivers the correct flow and pressure where it’s needed when it’s needed. Specify the 208lpm (216lpm

QUADTRAC 535) high-capacity pump for intensive hydraulic operations such as air seeders and beet lifters.

Huge lifting capacity , excellent response. To operate mounted tillage tools, planters or drills, equip this tractor with a factory-installed

threepoint hitch (not available on scraper versions). You’ll instantly have a lift capacity of up to 8949kg on QUADTRAC models. The

raise/lower switch and position control are within your natural reach on the armrest console.

True pulling power. STEIGER and QUADTRAC tractors have

the advantage where it really matters–at the drawbar. That’s

the common denominator used to size tillage tools to the

tractor. The centre-pull drawbar design efficiently transfers

engine horsepower into pulling power. Unlike competitive

units with drawbars mounted much farther behind thearticulation joint, the drawbar of this tractor is just 250mm

from the pivot point for maximum power transfer and

increased frame strength.

High capacity means higherproductivity.

To make the most of a new Series four-wheel drive,

specify high-capacity hydraulics, heavy-duty hitch and

powerful PTO. When you need to lift, lower, and power

implements, these systems help you do more work.

Conventional articulated steering gives the QUADTRACSeries full-power turns within 5.7m with minimal ridging.Easy-effort steering in all conditions allows you to do morework in less time, without levelling ridges left onheadlands.


10/16

10

Four independent tracks. Full power turns with minimal ridging. Built-in weight for easier ballasting. Choice of tyres or tracks.


11/16

The QUADTRAC 385, 435, 485, 535 in a version with 76 or 91cm tracks practically “floats” through the fields, giving you a smooth ride

with less soil compaction. That can result in better seed placement, a healthier root zone, uniform germination and higher yields.

As weight transfer is the key to putting power on the ground, the QUADTRAC tractor maintains an ideal 50/50 weight distribution under full

draft loads. Unlike a two-track system, which shifts weight from the front to the rear of the track, the QUADTRAC design evenly divides

the weight under load to an almost identical PSI load at the front and rear of the track. Two-track systems transfer more weight to the rear,

which decreases traction in the front and increases compaction at the rear. Another advantage of the QUADTRAC design is the positive

drive system. Lugs engage with bars on the drive wheel to eliminate internal slippage and help ensure minimal ground slippage.

A QUADTRAC tractor offers full-power turns under load, unlike two-track systems that

vary power to each track during turns. This makes it more efficient in contour and hillside

operations because no additional power is required to turn. Thanks to its built-in weight,

a STEIGER or QUADTRAC tractor offers an advantage over competitive four-wheel drives.

Greater gross vehicle weight reduces the amount of additional ballast needed for peak

performance and pulling power. When necessary, weight can be added to the front or

back by attaching cast brackets to the tractor frame. With the correct ballast, right tyres

and recommended PSI, a Series STEIGER tractor will respond with more pulling power,

a smoother ride, and maximum fuel efficiency.

11

TRACTION

Maximum traction withminimum compaction.

Case IH engineers first introduced the QUADTRAC

design in 1996 and it has led the industry ever since.

Like its predecessors, the QUADTRAC tractor continues

the tradition of setting new industry standards.

The QUADTRAC tractor is built to pivotand oscillate for constant track-to-soilcontact over rolling terrain.

The proven track design of a Case IHQUADTRAC tractor features positivedrive, self-adjusting tension and self-cleaning rubber belts.

QUADTRAC - 5.8PSI with 5.6m2 groundcontact.


12/16

12

A Case IH Steiger 4WD tractor is just as at-home on a land-leveling site or commercial scraper crew as it is in the farm fields. Special scraper versions of the Steiger 385,

435, 485, and 535 tractors have heavy scraper axles, heavy-duty drawbars, built-in frame weight and powerful engines with rugged transmissions. Also standard on all

scraper models are differential locks, backup alarm, tow cable, and beacon lights. For safety on the farm and on the construction jobsite, these tractors are ROPS and

FOPS certified. A special scraper quick-hitch drawbar with tow cable works well with most popular scraper brands. All this adds up to speedy hauling cycles to help you

move more dirt in a day, boosting your business productivity — and profitability.

SCRAPER APPLICATIONS

Built to work in the dirt.

Steiger scraper configurations designed with added durability tohandle demands of earthmoving applications.

The scraper tractor configuration’srugged chassis has the durabilityneeded for heavy loads, and responsivehydraulics for the cycle times youdemand.

For cutting to grade precisely andautomatically, the electronic hydraulicsystem

of a Steiger tractor interfaceswith popular laser-control systems,eliminating the need for expensive add-on valves.


13/16

13

INTEGRATED PRECISIONFOR MAXIMUM PRODUCTION

A powerful tool

for professional farming.

Increasing yield with the same input or

maintaining yield with reduced input, thatis what is done with Precision Farming.

With the DGPS based system on the

Case IH Axial-Flow® combines, you

permanently register your yield and store

it, linked to the precise location.

That information - in combination with

other DGPS based data l ike crop moisture

content and soil variations - is used to

prepare application maps for accurate,

site-specific seeding and spraying, thusincreasing your overall performance.

Precision Farming also reduces labour

costs and fuel consumption.

ISOBUS compatibility.

Having defined a communication protocol

used across the industry, ISOBUS extends

the possibilities of precision farming

through more intelligent functions and

efficient GPS data integration.

The Case IH AFS AccuGuide™

Autoguidance System.

Operators can concentrate fully on theperformance of their implement, while

the steering of the tractor or combine is

managed by AccuGuide™ Automatic

Steering System, designed and developed

by Case IH. In combination with DGPS

technology this system ensures parallelpasses when working in straight lines,

curves, pivots, or on undulating ground.

When planting, seeding, cultivating or

Advanced Farming Systems availableon Puma™ tractors are an essentialingredient for efficiency.

AccuGuide™ automatic steeringsystems with GPS receiver improveprecision farming accuracy a step further.

ISOBUS a powerful communication toolto control ISOBUS compatibleimplements for highest productivity.

tilling, there is no risk of overlap or

missed ground, even in difficult weather

conditions or at night.

AFS Pro 600 Display.

This industry-leading user interface system displays data in the cab, stores it for analysis

and makes adjustments on the go.


14/16

1414

OUR SYSTEMS APPROACH

Your local Case IH dealer can work with

CNH Capital to offer solutions that best fit

your budget and business goals.

At CNH Capital, we understand that no

two farms or agricultural businesses arethe same. That’s why we work so hard to

understand your needs first. We make it

our job to know your business inside and

out – your goals, your ideas, and your

unique outlook on the future. Then we can

put together financial solutions and

services that are right for you.

Skilled business advisor

at your dealership.

Demand more from your

Case IH dealership.

Purchasing a stand-alone piece of new

equipment? Keeping a whole fleet up-to-

date? Whatever your size of operation,

contact your local Case IH dealership for

professional advice on finance and future-

safe business investment. Case IH knows

your farming needs best.

Parts & service FinanceDealer

MAX

100% Support

100% Availability

Maintain the productivity of your

investment. Case IH and its dedicated

dealer network provide excellent support

when you take delivery of your new

machine and whilst it remains in your

ownership. On the farm, you can rely on

trained service professionals to maintain

the productivity of your investment.

Protect the value of your investment.

Behind every Case IH product stands an

extensive European parts logisticsorganisation, stocking more than 700,000

part numbers for products old and new.

Choosing to fit genuine Case IH parts will

maintain the safety, value and

performance of your original investment.

MAX - the new premium service from Case IH. We are always ready for you, around theclock, the whole year. Express delivery: when and where you need it.You get top priority during the season because your harvest cannot wait.

The call is free. However some European Operators may apply a charge, if the call ismade from a mobile phone. For any information about charge rate, please enquire inadvance from your provider.

00800 227344 00

00800 CASE IH 00

Extended protection programme.Case IH is at your side giving you the best professional solution: Safegard from CovéaFleet. This is the personalised insurance coverage for your Case IH machinery. Pleasecontact your dealer for more details. Subject to status and availability. Terms and

conditions apply.


15/16

15

SPECIFICATIONS

TECHNICAL DATA STEIGER®

385 STEIGER®

435 QUADTRAC 385 QUADTRAC 435 QUADTRAC 485 QUADTRAC 535

ENGINE IVECO CURSOR IVECO CURSOR IVECO CURSOR IVECO CURSOR IVECO CURSOR CUMMINS QSX

Displacement (cm3) 12900 12900 12900 12900 12900 14900

Rated engine power [kW/hp(CV)] 290 / 394 327 / 444 290 / 394 327 / 444 365 / 496 403 / 548

Rated Speed (rpm) 2000 2000 2000 2000 2000 2100

Maximum engine power [kW/hp(CV)] 319 / 433 360 / 489 319 / 433 360 / 489 402 / 546 443 / 602

Maximum torque at 1400rpm (Nm) 1939 2035 1939 2035 2442 2563

Engine torque rise (%) 40 40 40 40 40 40

Power growth [kW/hp(CV)] 29 / 39 33 / 45 29 / 39 33 / 45 37 / 50 40 / 54

Rated PTO power [kW/hp(CV)] 250 / 340 280 / 380 250 / 340 280 / 380 317 / 431 350 / 476

Fuel tank capacity (l) 1136 1136 1136 1136 1136 1136

TRANSMISSION

Type 16/2 Powershift 16/2 Powershift 16/2 Powershift 16/2 Powershift 16/2 Powershift 16/2 Powershift

AXLES

Axle drive Compound with 3 planets Drop Gear with 3 planets

Axle diameter (mm) 115 115 Flanged Flanged Flanged Flanged

HYDRAULICS

Hydraulic pump Pressure-flow compensated axial piston pump

Pump capacity Standard / Option (l/min) 151 / 208 151 / 208 151 / 208 151 / 208 151 / 208 159 / 216

Hitch category IV-N IV-N IV-N IV-N IV-N IV-N

Lift capacity, continuous at 610mm (kg) 8900 8900 8949 8949 8949 8949

CAB

Surveyor cab Standard / Option Deluxe / Luxury

WEIGHTS*

Total permitted weight (kg) 20864 20864 24494 24494 24494 24494

DIMENSIONS*

Wheel base (mm) 3911 3911 3912 3912 3912 3912

Frame pivot angle (°) ± 13 ± 13 ± 13 ± 13 ± 13 ± 13Frame articulation angle, horizontal (°) ± 42 ± 42 ± 38 ± 38 ± 38 ± 38

Centre line turning radius (m) 5.7 5.7 5.7 5.7 5.7 5.7

TRACKS

Drive Wheel drive 4 independent crawler tracks

Track width Standard / Option (cm) – – 76 / 91 76 / 91 76 / 91 76 / 91

*) To comply with legislation and specification in your country – Not available **) STEIGER 430 not offered in UK/ROI Case IH recommends lubricants

In addition to the extensive range of

standard equipment, Case IH offer acomprehensive choice of dealer installedaccessories, which are available at extracost.

Dealer installed

accessories


16/16

CASE IH: FOR THOSE WHO DEMAND MORE

www.caseih.com

Safety never hurts! Always read the Operator’s Manual before working with any equipment. Inspect equipment before using it, and be sure it is operating properly.Follow the product safety signs, and use any safety features provided.

This literature has been published for worldwide circulation. The standard and optional equipment and the availability of individual models may vary from one country to the next. Case IH reserves the right to undertake modifications without prior notice to the design and technical equipment at all times without this resulting in any obligation whatsoever to make such modifications to units already sold. Whilst every effort is made to ensure that the specifications, descriptions and illustrations in this brochure are correct at the time of going to press,these are also subject to change without prior notice. Illustrations may show optional equipment or may not show all standard equipment.

Case IH recommends lubricants

CNH Österreich GmbH, Steyrerstr. 32, A-4300 St.Valentin © 2008 CASE IH - STEIGER & QUADTRAC/COM/BR - Free phone 00800 22 73 44 00 - Printed in I taly - 04/08 - TP01 - Cod. N. 8C0006/INB

Documents

CASE IH Steiger quadtrac