Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
2
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
3
In 2015, The Carter Group celebrates its 70th anniversary.
When John Carter founded our business in 1945, he began a tradition of innovation and excellence that we pride ourselves on today.
From the local British grocers, butchers and fishmongers who relied on John Carter’s early cabinets to keep their produce fresh, to Carter Retail Equipment Ltd’s global clients of the 21st century – our values remain the same.
We are a family-owned company based in the heart of Britain whose industry-leading reputation is built on trust, quality and expertise.
From our manufacturing, research and development and testing facilities in Birmingham, we pioneer the newest technology and engineering solutions to meet the display refrigeration requirements of our supermarket client base.
While John Carter hand-built his first cabinets and coldstores from timber and other rudimentary materials in the mid 20th Century, the supermarket revolution brought a seismic shift in business and technology, with demand spreading first across Europe and then the world.
Today, Carter Retail Equipment Ltd satisfies demand from some of the largest global retailers for our Hydrocarbon, CO2 and Chilled air-ducted cabinets across Europe and then globally. Natural refrigerant cabinets are now the majority of our output.
Our company is fully equipped to provide solutions for new territories and emerging markets, including ultra energy-efficient products that offer the best performance and value for all climatic challenges.
Innovation is the application of better solutions to meet new requirements. As we look to what 100 years of trading will look like, the next 30 years will represent many new challenges with the re-invention of retail in developed markets and a transition of technology that has taken decades to realise and evolve in Europe which Carter Retail Equipment Ltd are now facilitating into other areas of the world in a matter of months.
Carter Retail Equipment Ltd takes prides in being the preferred supplier to our customers, which we achieve by providing the best technologies and products in retail refrigeration to any store format – worldwide.
It’s why thousands of satisfied customers across the world put their trust in us everyday.
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Our Clients
4
ContentsEnvironment & Sustainability 5
I Range Open Multidecks 6
I Range Multidecks with Doors 8
N Range Low Height Multidecks 10
H Range Produce Merchandisers 12
C Range Serve Over Counters 14
F Range Full Glass Door Freezers 16
G Range Half Glass Door Freezers 18
W Range Well Freezers 20
P Range Convenience Integrals 22
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
We care for our environment...
Energy efficiency in supermarket refrigeration has a critical role to play in preserving our environment.
The requirement for refrigerated food in the modern world fulfils one of the most basic of human needs – but its impact is largely unknown to the public consumer.
This is why the environmental impact of Carter Retail Equipment Ltd is central to the products we put into the marketplace.
Supermarket growth is prolific and in the United Kingdom its refrigeration demand already represents about 3% of national electricity consumption.
With every new product Carter Retail Equipment Ltd produces, we strive to cut environmental impact and power consumption.
For other areas of the world currently realising rapid population and economic growth its effect will be even more profound; the built environment will need to grow but the energy resource to fulfil this growth will only diminish. The paramount need for environmental sustainability is not a fashion it is a reality.
Food waste in developing markets through inefficient cold-chains creates a combined challenge. In 2012 – through inefficient cold chains and consumer waste:
- A third of all food produced was wasted
- 25% of all fresh water consumed globally was used to produce food that was ultimately wasted
- 300 million barrels of oil for the same cause
- And 24 million acres of deforestation globally for food production to be ultimately wasted
Energy and food are not infinite resources. Energy efficient refrigeration providing food at the right product temperatures will assist in alleviating concerns of our growing global population.
Our commitments through research and development and training are:
- Leading the way on refrigeration containment
- The usage of low GWP refrigerants
- Providing the right product temperatures with the highest evaporating temperatures
- The usage of the best commercially available energy efficient components
- Providing best value through life-cycle costs
5
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
6
I Range Open Multidecks
Module Lengths
3750mm
2500mm
1875mm
1250mm
Wrap around end cases
Features & Benefits
HFC, Natural refrigerant options
Air-ducted case options
Various LED lighting choices
Colour and profiling schemes to suit your store requirements
Undershelf lighting options
Product Temperature
3M0 -1/+4C°
3M1 -1/+5C°
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
7FHC - ICFHC - IB FHC - ID FHC - IE FHC - IJ
2090
2090
2090
2090
9501045 845 750
600 500 400500
2090
700
4001612
1612
1612
1612
1612
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
I Range Multidecks with Doors
8
Features & Benefits
HFC, Natural refrigerant options
Air-ducted case options
Various LED lighting choices
Colour and profiling schemes to suit your store requirements
Hinged, sliding and universal door options
Undershelf lighting options
Module Lengths
3750mm
2500mm
1875mm
1250mm
Wrap around end cases
Product Temperature
3M0 -1/+4C°
3M1 -1/+5C°
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
9FHC - With Doors IHFHC - With Doors IL FHC - With Doors IG FHC - With Doors IF FHC - With Doors IK
2090
2090
2090
2090
9501045 845 750
600 500 400500
2090
700
4001612
1612
1612
1612
1612
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
N Range Low Height Multidecks
10
Features & Benefits
HFC, Natural refrigerant options
Choice of depths for store formats
Various LED lighting choices
Colour and profiling schemes to suit your store requirements
Undershelf lighting options
Module Lengths
3750mm
2500mm
1875mm
1250mm
Wrap around end cases
Product Temperature
3M0 -1/+4C°
3M1 -1/+5C°
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
11LHC - NGLHC - NH LHC - ND LHC - NE
500
600
400
350
400
500
350
250
400
500
350
250
350
400
300
250
845
550
1493
550
1493
750
550
950
1012
500700 600
1012
1012
1493
700
1045
795
1012
1493
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
H Range Produce Merchandisers
12
Features & Benefits
HFC, Natural refrigerant options
Various LED lighting choices
Colour and profiling schemes to suit your store requirements
The aesthetics of roll-in type cabinet with the energy efficiencies of a multideck
Crate supply options
Product Temperature
3M1 -1/+5C°
3M2 -1/+7C°
3H1 -1/+10C°
Module Lengths
3750mm
2500mm
1875mm
1250mm
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
13HE Produce Shelved HE Produce Crated
2090
209016
91
1691
1200 1200
500
500
700
800800
400
450
500
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
C Range Serve Over Counters
14
Features & Benefits
Meat, Deli, Salad, Olives, Fish, Cheese
HFC, Natural refrigerant options
Range of counters to suite through
Colour and profiling schemes to suit your store requirements
Module Lengths
3750mm
2500mm
1875mm
1250mm
Corner (Internal & external options)
Product Temperature
3M0 -1/+4C°
3M1 -1/+5C°
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
15
Dual Function Meat Display Dual Function Fish Display Salad Bar
1245
860
310
1230
600
500
200
1245
860
310
1230
500
200
650
1000
1410
1070
890
Serve Over - Curved Glass Self Serve - Square GlassServe Over - Square Glass
860
1150
1120
850
200
1250
860
1150
850
1150
860
850
920
200 200
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
F Range Full Glass Door Freezers
16
Module Lengths
5 door 3900mm
4 door 3120mm
3 door 2340mm
2 door 1560mm
End cases
Features & Benefits
HFC, Natural refrigerant options
Choice of depths for store formats
Various LED lighting choices
Colour and profiling schemes to suit your store requirements
Range of heaterless and composite door and frame options
Product Temperature
3L1 -18C°
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
17FHGD - FD FHGD - FE
2050
2050
930 700
600
1570
400
1570
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
G Range Half Glass Door Freezers
18
Module Lengths
3750mm
2500mm
1875mm
End cases
Features & Benefits
Single coil system
HFC, Natural refrigerant options
Choice of depths for store formats
Various LED lighting choices
Colour and profiling schemes to suit your store requirements
Range of heaterless and composite door and frame options
Lid options to well
Product Temperature
3L1 -18C°
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
19HGD - Without canopy lights GCHGD - With canopy lights GD
2115
2115
1045 1045
840840
800
375
375
800
400 400
914
914
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
W Range Well Freezers
20
Features & Benefits
HFC, Natural refrigerant options
Choice of depths for store formats
Various LED lighting choices
Colour and profiling schemes to suit your store requirements
Various lid options
Module Lengths
3750mm
2500mm
1875mm
End cases
Product Temperature
3L1 -18C°
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
21
Well Case - WAIsland Well Case Wide - WD Island Well Case Narrow - WE
910
1045
850 400
600 6001010 1010
914
914
915
15502365
400
400
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
P Range Convenience Integrals
22
Features & Benefits
Harmonised product range - Freezers, Multidecks for Convenience Stores
HFC, Natural refrigerant options
Various LED lighting choices
Colour and profiling schemes to suit your store requirements
Range of heaterless and composite freezer door and frame options
Hinged, sliding and universal high temperature door options
Module Lengths
2500mm
1875mm
1250mm
Wrap around end cases
Product Temperature
3M0 -1/+4C°
3M1 -1/+5C°
3L1 -18C°
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
23PA Integral PB Integral PC Frozen Integral
500
2000
850
2090
850
500
2000
850
500
407
407
407
1575
1485
1485
Prinect Color Editor
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Carter Retail Equipment LtdLea Ford RoadKitts GreenBirminghamB33 9TXUK
Page is color controlled with Prinect Color Editor 13.00.020 Copyright 2013 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_300_eci.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: no Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
