CANCELLED AND SUPERSEDED SPECIFICATIONS LIST...In cases where the engineering drawing requires Special Bar Quality (SBQ) such as Vacuum Induction Melting (VIM) or Vacuum Arc Melting

Pub. No. 24230

THIS DOCUMENT CONTAINS INFORMATION PROPRIETARY TO CARLETON LIFE SUPPORT SYSTEMS, INC. ANY REPRODUCTION, DISCLOSURE, OR USE OF THIS DOCUMENT IS EXPRESSLY PROHIBITED EXCEPT AS CARLETON LIFE SUPPORT SYSTEMS, INC. MAY OTHERWISE AGREE IN WRITING. CARLETON LIFE SUPPORT SYSTEMS INC. IS DOING BUSINESS AS COBHAM MISSION SYSTEMS.

CANCELLED AND SUPERSEDED

SPECIFICATIONS LIST

Revision date: Revision letter: -

Issue date: 28 August 2018 Purchase order:

WARNING: This document may contain technical data, the export of which may be restricted by the Arms Export Control Act or the Export Administration Act of 1979, as amended. Export or transfer to foreign persons without prior U.S. Government authorization may be subject to severe criminal penalties.

Prepared by M. Mika

Approved by M. Martin

Pub. No. 24230


i

REVISION HISTORY

Submittal Date Change Summary--- 28 August 2018 Original Release

Pub. No. 24230


ii

TABLE OF CONTENTS 1.0 INTRODUCTION .................................................................................................................................. 1

1.1 Purpose ............................................................................................................................................ 1

1.2 Substitution of Alternate Material Forms, Tempers, Etc. ................................................................. 1

2.0 SUPERSEDED SPECIFICATIONS ..................................................................................................... 1

2.1 Conditions for Utilizing Superseded Specifications .......................................................................... 1

2.1.1 Contractual and Legal Requirements .......................................................................................... 1

2.1.2 Alloy Requirements ...................................................................................................................... 1

2.1.3 Mill Form Requirements ............................................................................................................... 1

2.1.4 Temper Requirements ................................................................................................................. 1

2.1.5 Process Requirements ................................................................................................................. 2

2.1.6 Special Bar Quality and Special Process Requirements ............................................................. 2

2.1.7 Size Requirements ....................................................................................................................... 2

2.1.8 Requirements for Non-Metals ...................................................................................................... 2

2.2 Additional Notes ............................................................................................................................... 3

LIST OF TABLES

Table I. Cancelled and Superseded Specifications ........................................................................................ 4

Pub. No. 24230


1

1.0 INTRODUCTION

This publication establishes technical equivalence of superseded material and process specifications.

1.1 Purpose

This document may be used by the engineering, quality, and manufacturing departments for the purpose of procuring materials and specifying processes for production in cases where the engineering drawing lists a cancelled or superseded specification.

1.2 Substitution of Alternate Material Forms, Tempers, Etc.

Only the technically equivalent superseding specifications are listed herein. This document does not and shall not list substitute or alternate materials. There shall be no attempt to substitute mill form, temper, or any other property of a cancelled, stabilized, or active specification.

2.0 SUPERSEDED SPECIFICATIONS

Table I lists cancelled and superseded specifications. Superseding specifications may be used to satisfy engineering drawing requirements in lieu of the original drawing material provided that the conditions in paragraph 2.1 are met.

2.1 Conditions for Utilizing Superseded Specifications

The conditions in this paragraph shall be met before a superseding specification can be used to meet the requirements of an engineering drawing.

2.1.1 Contractual and Legal Requirements

The use of superseding specifications shall not be in violation of any legal, regulatory, or contractual requirements. The use of this document shall not be construed as permitting the use of a specification where it may violate laws, regulations, or contractual requirements.

2.1.2 Alloy Requirements

Only the alloy specified on the engineering drawing shall be used to satisfy the requirements of the engineering drawing. The right to use a superseding specification does not permit the substitution of an alloy even if the superseding specification lists a different alloy from the engineering drawing.

2.1.3 Mill Form Requirements

The mill form of the material is the manufacturing process used to finish the material to the final size. Typical forms are cold finished bar, plate, or sheet as well as extruded bar, plate, sheet, or shapes. Only the form specified on the engineering drawing shall be used when using a superseding specification. The right to use a superseding specification does not permit the substitution of mill form. For example: substituting extruded bar for cold finished bar is prohibited and likewise substituting cold finish plate for cold finished bar is also prohibited.

2.1.4 Temper Requirements

Only the temper specified on the engineering drawing shall be used to satisfy the requirements of the engineering drawing. The right to use a superseding specification does not permit the substitution of a temper even if superseding specifications permit a different temper from the engineering drawing. For example, it is prohibited to substitute 1/2 hard 304 stainless steel for annealed stainless steel, PH13-8Mo H950 for PH13-8Mo H1000, or to substitute 6061-T651 for 6061-T6.

Pub. No. 24230


2

2.1.5 Process Requirements

The right to use a superseding specification does not permit the substitution of one process for another.

For example, drawings that list QQ-P-35 passivation require the use of nitric acid and, in some cases, hexavalent chromium containing baths. The superseding specification, AMS 2700, permits the use of citric acid baths in addition to the baths specified in QQ-P-35. Even though additional options for processing have been added in the superseding specification, the substitution of citric acid baths for nitric acid baths is prohibited and the ability to use superseding specifications shall not be construed as permission to substitute one type of process (bath) for another.

When choosing a process listed in a superseding specification, only the process that closest matches the original engineering drawing shall be selected.

2.1.6 Special Bar Quality and Special Process Requirements

When special quality materials or processes are called out on the engineering drawing, only processes with equivalent process control shall satisfy the requirements of the engineering drawing. Aerospace grade materials and aerospace grade processes have special requirements for atmosphere control, temperature control, temperature accuracy, temperature uniformity, traceability, inspection and various other variables during their processing. The substitution of commercial grade alloys or processes which do not have equivalent control or documentation of the process history is prohibited.

In cases where the engineering drawing requires Special Bar Quality (SBQ) such as Vacuum Induction Melting (VIM) or Vacuum Arc Melting (VAR) grades of steel, standard grades shall not be substituted.

In cases where the engineering drawing requires low magnetic permeability materials, substitutions shall not be made without approval from the cognizant design engineer.

2.1.7 Size Requirements

Materials of a larger diameter or thickness than permitted by the engineering drawing shall not be substituted. The size of the material at time of heat treatment shall determine whether or not the material is suitable for use. Also, superseding materials shall have sizes and tolerances equivalent to the engineering drawing and be suitable for the method of manufacture.

2.1.8 Requirements for Non-Metals

2.1.8.1 Material Base and Hardness

Only the material base and hardness specified on the engineering drawing shall be used to satisfy the requirements of the engineering drawing. The right to use a superseding specification does not permit the substitution of one base or hardness for another. For example, if the engineering drawing calls out silicone with a durometer hardness of 70, then the superseding material shall be silicone with a durometer hardness of 70 even if the superseding specification lists other materials or hardness.

Also, if the engineering drawing specifies a material with a trademark name (i.e. Delrin) the generic material shall not be substituted (i.e. acetal). Delrin (product of E.I. Dupont) must be used for this part.

2.1.8.2 Material Form

If the engineering drawing calls out a specification that indicates the material is extruded, the superseding material shall also be extruded. Molded material shall not be used as a replacement.

2.1.8.3 Fluid and Chemical Resistance

The fluid susceptibility and chemical resistance properties shall be equivalent or better than the superseded

Pub. No. 24230


3

material. The right to use a superseding material specification does not permit the substitution of fluid or chemical resistance properties.

NOTE

Even if the fluid or chemical resistance is not listed on the engineering drawing, the superseding material shall have fluid and chemical resistance equivalent to or better than the superseded material.

2.1.8.4 Thermal Properties

The thermal properties, including melting temperature, deflection under load, etc., shall be equivalent or better than the superseded material. The right to use a superseding material specification does not permit the substitution of thermal properties.

2.2 Additional Notes

Note that some specifications may have been superseded more than once since the drawing was released. It is therefore always recommended to see if the superseding specification has itself been superseded by another specification. This is the case for many “QQ” specifications such as QQ-A-250/11 which was superseded by AMS-QQ-A-250/11 which is now stabilized and will soon be superseded by AMS4025 (6061-O), AMS4026 (6061-T4/T451), and AMS4027 (6061-T6/T651).

Pub. No. 24230


4

Table I. Cancelled and Superseded Specifications

DOCUMENT TITLE SUPERSEDED BY

A-A-51157 RODS AND ELECTRODES, WELDING, BARE, COPPER AND COPPER ALLOY AWS A5.7/A5.7M

A-A-51158 RODS, WELDING, COPPER AND COPPER ALLOY, FOR OXYFUEL GAS WELDING AWS A5.7/A5.7M

A-A-51173 RODS AND ELECTRODE, WELDING, BARE, NICKEL AND NICKEL ALLOY AWS A5.14/A5.14M

AMS2201 TOLERANCES – ALUMINUM AND ALUMINUM ALLOY BAR, ROD, WIRE, AND FORGING STOCK ROLLED OR COLD-FINISHED

ANSI H35.2

AMS2202 TOLERANCES – ALUMINUM ALLOT AND MAGNESIUM ALLOY SHEET AND PLATE ANSI H35.2

AMS2203 TOLERANCES – ALUMINUM ALLOY DROWN TUBING ANSI H35.2

AMS2204 TOLERANCES – ALUMINUM ALLOY STANDARD STRUCUTAL SHAPES ANSI H35.2

AMS2205 TOLERANCES – ALUMINUM ALLOY AND MAGNESIUM ALLOY EXTRUSIONS ANSI H35.2

AMS2211 TOLERANCES - MAGNESIUM ALLOY ZK60A EXTRUSIONS NO REPLACEMENT

AMS2212 TOLERANCES – MAGNESIUM ALLOY SHEET AND PLATE NO REPLACEMENT

AMS2268 CHEMICAL CHECK ANALYSIS LIMITS CAST NICKEL AND NICKEL ALLOYS AMS2269

AMS2308 MAGNETIC RUBBER INSPECTION AMS-I-83387

AMS2309 MAGNETIC RUBBER INSPECTION MATERIAL NO REPLACEMENT

Pub. No. 24230


5


AMS2316 METALLOGRAPHIC EVALUATION OF GRAIN SIZE IN WROUGHT NICKEL AND HEAT RESISTANT ALLOYS

ASTM E1181, ASTM E112

AMS2350B STANDARDS AND TEST METHODS NO REPLACEMENT

AMS2373 QUALITY ASSURANCE SAMPLING OF BOLTS AND SCREWS NO REPLACEMENT

AMS2421 PLATING MAGNESIUM FOR SOLDERABILITY ZINCE IMMERSION PROCESS NO REPLACEMENT

AMS2439 SELECTIVE (BRUSH) NICKEL PLATING LOW-STRESSED, HARD DEPOSIT AMS2451/2

AMS2441 SELECTIVE (BRUSH) NICKEL PLATING LOW-STRESSED, LOW HARDNESS DEPOSIT

AMS2451/3

AMS2450 SPRAYED METAL FINISH, ALUMINUM NO REPLACEMENT

AMS2468 HARD ANODIC COATING TREATMENT OF ALUMINUM ALLOYS AMS2469

AMS2505 ALUMINUM PAINT FINISHING LOW BAKING NO REPLACEMENT

AMS2552 CLEANING, PACKAGING, AND ASSEMBLY OF CRITICAL SYSTEM COMPONENTS CLEAN ROOM PROCEDURE, 500 MICRON MAX PARTICLE SIZE

NO REPLACEMENT

AMS2553 CLEANING, PACKAGING, AND ASSEMBLY OF CRITICAL SYSTEM COMPONENTS CLEAN AREA PROCEDURE, 2500 MICRON MAX PARTICLE SIZE

NO REPLACEMENT

AMS2560 IMPREGNATION OF CASTINGS NO REPLACEMENT

AMS2570 PRESERVATION OF ENGINES NO REPLACEMENT

Pub. No. 24230


6


AMS2574 PRESERVATION OF ENGINES (LIMITED PERIOD) NO REPLACEMENT

AMS2601 PRESSURE TESTING, GASEOUS MEDIA 10 PSI AMS2610

AMS2602 PRESSURE TESTING 25 PSI AMS2610

AMS2604 PRESSURE TESTING, GASEOUS MEDIA 40 PSI NO REPLACEMENT




AMS2616 PRESSURE TESTING, HYDRAULIC 200 PSI AMS2615

AMS2620 PRESSURE TESTING, HYDRAULIC 1,000 PSI AMS2615

AMS2625 PRESSURE TESTING, HYDRAULIC 2,500 PSI AMS2615

Pub. No. 24230


7


AMS2635 RADIOGRAPHIC INSPECTION ASTM E1742/E1742M

AMS2640 MAGNETIC PARTICAL INSPECTION ASTM E1444/E1444M

AMS2645 FLOURESCENT PRENETRANT INSPECTION ASTM E1417/E1417M

AMS2646 CONTRAST DYE PENETRANT INSPECTION ASTM E1220

AMS2650 FLUOROSCOPIC X-RAY INSPECTION NO REPLACEMENT

AMS2663 SILVER ALLOY BRAZING FILLER METAL 56AG - 22CU - 17ZN - 5.0SN 1152- 1203 °F (622 - 651 °C) SOLIDUS-LIQUIDUS RANGE - UNS P07563

AMS4789

AMS2666 SILVER BRAZING HIGH TEMPERATURE AMS2664

AMS2671 COPPER BRAZING CORROSION AND HEAT RESISTANT STEELS AND ALLOYS AMS2670

AMS2756 GAS NITRIDING OF STEEL PARTS AMS2759/6

AMS2760 HEAT TREATMENT - CARBON, LOW - ALLOY AND SPECIALITY STEELS AMS2759

Pub. No. 24230


8


AMS2811 IDENTIFICATION – ALUMINUM AND MAGNESIUM ALLOY WROUGHT PRODUCTS ASTM B666/B666M

AMS2815 IDENTIFICATION – WELDING WIRE LINE CODE SYSTEM AMS2816

AMS2825 MATERIAL SAFETY DATA SHEETS ANSI Z400.1/Z129.1

AMS3010 HYDROGEN, LIQUID, HIGH PURITY, PROPELLANT GRADE NO REPLACEMENT

AMS3012 OXYGEN, LIQUID, PROPELLANT GRADE NO REPLACEMENT

AMS3015 NITROGEN, LIQUID, PROPELLANT GRADE NO REPLACEMENT

AMS3028 AVIATION FUEL, GRADE 91/98 NO REPLACEMENT

AMS3032 AVIATION FUEL GRADE 100/130 ASTM D910



Pub. No. 24230


9


AMS3070 OIL, CARBURETOR FLUSHING NO REPLACEMENT

AMS3071 CONCENTRATE, CORROSION PREVENTIVE COMPOUND, AIRCRAFT ENGINE NO REPLACEMENT

AMS3072 COMPOUND, CORROSION – PREVENTIVE AIRCRAFT ENGINE NO REPLACEMENT

AMS3076 COMPOUND, CORROSION – PREVENTIVE HARD FILM, COLD APPLICATION NO REPLACEMENT

AMS3078 COMPOUND, CORROSION – PREVENTIVE SOFT FILM, COLD APPLICATION NO REPLACEMENT

AMS3081 ANTI-SCUFFING TREATMENT, GRAPHITE VARNISH – INCLUDES REVISION A NO REPLACEMENT

AMS3082 COMPOUND ANTI-SEIZE (MICA BASE) NO REPLACEMENT

AMS3087 COMPOUND, INSULATING AND SEALING SILICONE NO REPLACEMENT

AMS3099 CURING AGING, SOLID AROMATIC AMINE, 4,4' - DIAMONODIPHENYL SULFONE NO REPLACEMENT

AMS3100/1 ADHESION PROMOTER FOR POLYSULFIDE SEALING COMPOUNDS NONHALOGENATED SOLVENT

AMS3100

Pub. No. 24230


10


AMS3100/2 ADHESION PROMOTER FOR POLYSULFIDE SEALING COMPOUNDS NONRESTRICTED SOLVENT

AMS3100

AMS3100/3 ADHESION PROMOTER FOR POLYSULFIED SEALING COMPOUNDS WATER BASED

AMS3100

AMS3106 PRIMER, ADHESIVE, CORROSION-INHIBITING -55 TO 95 °C (-67 TO 200 °F) AMS3107

AMS3128 ALUMINUM PIGMENT PASTE NO REPLACEMENT

AMS3137 RESIN, CONFORMAL COATING, URETHANE ELASTOMER NO REPLACEMENT

AMS3138/1 COATING MATERIAL, FLUROCARBON (FKM), ELASTOMERIC RAIN-EROSION RESISTANT, BLACK

AMS3138

AMS3138/2 COATING MATERIAL, FLUOROCARBON (FKM) ELASTOMERIC RAIN-EROSION AND THERMAL-FLASH RESISTANT, WHITE

AMS3138

AMS3138/3 COATING MATERIAL, FLUOROCARBON (FKM) ELASTOMERIC RAIN-EROSION RESISTANT, COLOR MATCHED

AMS3138

AMS3138/4 COATING MATERIAL, FLUOROCARBON (FKM) ELASTOMERIC ANTI-STATIC TOPCOATING, BLACK

AMS3138

AMS3138/5 COATING MATERIAL, FLUOROCARBON (FKM) ELASTOMERIC ANTI-STATIC TOPCOATING, WHITE

AMS3138

Pub. No. 24230


11


AMS3138/6 COATING MATERIAL, FLUOROCARBON (FKM) ELASTOMERIC ANTI-STATIC TOPCOATING, COLOR MATCHED

AMS3138

AMS3139 ADHESIVE, URETHANE TWO-PART NO REPLACEMENT

AMS3150 FLUID, HYDRAULIC FIRE RESISTANT NO REPLACEMENT

AMS3151 FLUID, AIRCRAFT COMPASS NO REPLACEMENT

AMS3155 OIL FLUORESCENT PENETRANT SOLVENT SOLUBLE AMS2644

AMS3156 OIL, FLUORESCENT PENETRANT WATER WASHABLE AMS2644

AMS3157 OIL FLUORESCENT PENETRANT HIGH FLUORESCENCE, SOLVENT SOLUBLE AMS2644

AMS3166 SOLVENTS, CLEANING – CLEANING PRIOR TO APPLICATION OF SEALING COMPOUNDS

AMS3167

AMS3170 THINNER, ALCOHOL-ESTER NO REPLACEMENT

AMS3185 HYDRAULIC FLUID, NONFLAMMABLE CHLOROTRIFLUOROETHYLENE (CTFE) BASE

MIL-H-53119

Pub. No. 24230


12


AMS3217/6 TEST SLABS, PHOSPHONITRILIC FLUOROELASTOMER (FZ) 65 - 75 NO REPLACEMENT

AMS3228 ACRYLONITRILE BUTADIENE (NBR) RUBBER HOT OIL AND COOLANT RESISTANT, LOW SWELL 65 - 75

NO REPLACEMENT

AMS3232 ASBESTOS AND SYNTHETIC RUBBER SHEET HOT OIL RESISTANT AMS3275

AMS3245 SYNTHETIC RUBBER BUNA S TYPE (35-45) NO REPLACEMENT

AMS3259 SEALING COMPOUND, POLYTHIOETHER NONCHROMATED, CORROSION INHIBITING FOR INTERMITTENT USE TO 360 °F (182 °C)

NO REPLACEMENT

AMS3263 SEALING COMPOUND, POLYTHIOETHER, AMBIENT CURE OR IMMEDIATE HEAT CURE FOR AIRCRAFT STRUCTURES, FUEL RESISTANT WITH INTERMITTENT USE TO 400 °F (204 °C)

NO REPLACEMENT

AMS3267 SEALING COMPOUND, LOW ADHESION, CORROSION INHIBITING FOR REMOVABLE PANELS AND FUEL TANK INSPECTION PLATES

AMS3284

AMS3267/3 SEALING COMPOUND, LOW ADHESION, CORROSION INHIBITING 200 TO 600 POISES (20 TO 60 PA⋅S), 2 HOUR APPLICATION TIME (A-2)

AMS3267

AMS3287 FELT (BACK CHECK), GRAY (95% WOOL) NO REPLACEMENT

AMS3296 DIGLYCIDYL ESTER RESIN NO REPLACEMENT

Pub. No. 24230


13


AMS3326 FLUOROSILICONE RUBBER FUEL AND OIL RESISTANT 50 - 65 AMS3325

AMS3344 SILICONE RUBBER 1800 PSI 45-55 NO REPLACEMENT

AMS3360 SILICONE POTTING COMPOUND, ELASTOMERIC TWO-PART, GENERAL PURPOSE 200 - 600 POISE VISCOSITY

NO REPLACEMENT

AMS3365 SILICONE RUBBER COMPOUND ROOM TEMPERATURE VULCANIZING, 35,000 CENTIPOISE VISCOSITY DUROMETER 40 - 55

NO REPLACEMENT

AMS3367 SILICONE RUBBER COMPOUND ROOM TEMPERATURE VULCANIZING, 1,200,000 CENTIPOISE VISCOSITY DUROMETER 55 - 70

AMS3365

AMS3369 SILICONE RESIN, ELASTOMERIC, OPAQUE ELEVATED TEMPERATURE CURE NO REPLACEMENT

AMS3371 SILICONE RESIN, ELASTOMERIC, OPAQUE ROOM TEMPERATURE CURE NO REPLACEMENT

AMS3374/1 SEALING COMPOUND, ONE-PART SILICONE (TYPE 1) AIRCRAFT FIREWALL AMS3374

AMS3374/2 SEALING COMPOUND TWO-PART, ADDITION CURED SILICONE (TYPE 2) FIREWALL SEALANT

AMS3374

AMS3374/3 SEALING COMPOUND TWO-PART, CONDENSATION CURED (TYPE 3) FIREWALL SEALANT

AMS3374

Pub. No. 24230


14


AMS3374/4 SEALING COMPOUND TWO-PART, POLYSULFIDE (TYPE 4) FIREWALL SEALANT AMS3374

AMS3416 FLUX, ALUMINUM DIP BRAZING 1090°F (588°C), FUSION POINT NO REPLACEMENT

AMS3417 FLUX, BRAZING HIGH TEMPERATURE AWS A5.31M/A5.31

AMS3510 COATING, ABRASION RESISTANT FOR POLYCARBONATE PARTS NO REPLACEMENT

AMS3532 ETHYLENE TETRAFLUOROETHYLENE (ETFE) MOLDED SHEET STRESS RELIEVED

NO REPLACEMENT

AMS3533 ETHYLENE TETRAFLUOROETHYLENE (ETFE) EXTRUSIONS NO REPLACEMENT

AMS3534 ETHYLENE TETRAFLUOROETHYLENE (ETFE) MOLDINGS STRESS-RELIEVED NO REPLACEMENT

AMS3535 BARRIER MATERIAL, WATER VAPOR RESISTANT, FLEXIBLE, OPAQUE NO REPLACEMENT

AMS3540 PAPER, GREASEPROOF ACID FREE - NONCORROSIVE - LIGHT DUTY NO REPLACEMENT

AMS3554 FIBREBOARD, CORRUGATED DOUBLE WALL NO REPLACEMENT

Pub. No. 24230


15


AMS3565 VULCANIZED FIBRE NO REPLACEMENT

AMS3569 FOAM, FLEXIBLE POLYURETHANE (PUR) OPEN PORE, POLYVINYLCHLORIDE (PVC) COATED

NO REPLACEMENT

AMS3574 POLYURETHANE, FOAM-IN-PLACE, RIGID CLOSED CELL, FOR HELMET LINERS NO REPLACEMENT

AMS3580 CAST RODS, TUBES, AND SHAPES METHYL METHACRYLATE PLASTIC NO REPLACEMENT

AMS3581 CAST RODS, TUBES, AND SHAPES, METHYL METHACRYLATE PLASTIC HEAT RESISTANT

NO REPLACEMENT

AMS3583 PLASTIC TUBING, ELECTRICAL INSULATION CROSSLINDED POLYVINYL CHLORIDE, SEMI-RIGID HEAT SHRINKABLE 2 TO 1 SHRINK RATIO

NO REPLACEMENT

AMS3584 PLASTIC TUBING, ELECTRICAL INSULATION POLYTETRAFLUOROETHYLENE, HEAT SHRINKABLE OVER EXPANDED

NO REPLACEMENT

AMS3585 PLASTIC TUBING, ELECTRICAL INSULATION POLYTETRAFLUOROETHYLENE, HEAT SHRINKABLE THIN WALL

NO REPLACEMENT

AMS3586 PLASTIC TUBING, ELECTRICAL INSULATION POLYTETRAFLUOROETHYLENE, HEAT SHRINKABLE STANDARD WALL

NO REPLACEMENT

AMS3590 PLASTIC SHEET, COPPER FACED PAPER REINFORCED PHENOLIC RESIN NO REPLACEMENT

Pub. No. 24230


16


AMS3591 POLYETHYLENE TEREPHTHALATE PLASTIC TUBING, ELECTRICAL INSULATION - THERMALLY WELDED, HEAT SHRINKABLE 1.6 TO 1 SHRINK RATIO

NO REPLACEMENT

AMS3598 PLASTIC SHEET, COPPER FACED, GTN GLASS FABRIC REINFORCED POLYTETRAFLUOROETHYLENE

NO REPLACEMENT

AMS3622 PLASTIC MOLDINGS AND EXTRUSIONS, CELLULOSE ACETATE GENERAL PURPOSE

NO REPLACEMENT

AMS3629 POLYVINYL CHLORIDE TUBING, EXTRUDED, HIGH TEMPERATURE ELECTRICAL INSULATION

NO REPLACEMENT

AMS3640 PLASTIC MOLDINGS MELAMINE-FORMALDEHYDE, MINERAL FILLED NO REPLACEMENT

AMS3651 POLYTETRAFLUOROETHYLENE AMS3660, AMS3656, AMS3652, AMS3667

AMS3814 CORD, CORELESS, PARA-ARAMID, INTERMEDIATE MODULUS NO REPLACEMENT

AMS3814/1 CORD, CORELESS, PARA-ARAMID INTERMEDIATE MODULUS 35 LB (155 N), 13 500 FT PER LB (9070 M/KG)

NO REPLACEMENT

AMS3814/17 CORD, CORELESS, PARA-ARAMID INTERMEDIATE MODULUS 10 000 LB (44 480 N), 22 FT PER LB (15 M/KG)

NO REPLACEMENT

AMS3814/9 CORD, CORELESS, PARA-ARAMID INTERMEDIATE MODULUS 2000 LB (8895 N), 135 FT PER LB (90 M/KG)

NO REPLACEMENT

Pub. No. 24230


17


AMS3822 CLOTH, TYPE "E" GLASS "B" STAGE EPOXY RESIN IMPREGNATED STYLE 181 - 75DE

NO REPLACEMENT

AMS3830 SILICA CLOTH "B" STAGE PHENOLIC RESIN IMPREGNATED HIGH PRESSURE MOLDING

NO REPLACEMENT

AMS3839 FABRIC, WIRE - REINFORCEMENT ASBESTOS POLYTETRAFLUOROETHYLENE IMPREGNATED, SINTERED

AMS3677

AMS3840 FABRIC, ASBESTOS POLYTETRFLUOROETHYLENE IMPREGNATED, SINTERED AMS3677

AMS3842 P0LYTETRAFLU0R0ETHYLENE SHEET ASBESTOS FIBER REINFORCED NO REPLACEMENT

AMS3843 POLYTETRAFLUOROETHYLENE SHEET ASBESTOS FIBER REINFORCED HIGH COMPRESSIBILITY, LOW DENSITY

NO REPLACEMENT

AMS3845/1 CLOTH, TYPE "E" GLASS, "B" STAGE POLYIMIDE-RESIN-IMPREGNATED 181 STYLE FABRIC, LOW-FLOW ADDITION-CURE RESIN FOR PRESS CURE AT 40 - 100 PSI (275 - 690 KPA) OR VACUUM/AUTOCLAVE PROCESSING

AMS3845

AMS3845/2 CLOTH, TYPE "E" GLASS, "B" STAGE POLYMIDE-RESIN-IMPREGNATED 181 STYLE FABRIC, HIGH-FLOW ADDITION - CURE RESIN FOR PRESS CURE AT 10 - 100 PSI (275 - 690 KPA) OR VACUUM/AUTOCLAVE PROCESSING

AMS3845

AMS3848 CLOTH, NYLON, METALLIZED NO REPLACEMENT

AMS3851 FIRE RESISTANT PROPERTIES FOR AIRCRAFT MATERIALS NO REPLACEMENT

Pub. No. 24230


18


AMS3852 FLAME RESISTANT PROPERTIES FOR AIRCRAFT MATERIALS NO REPLACEMENT

AMS3853 CORD, AROMATIC POLYAMIDE, NONMELTING NO REPLACEMENT

AMS3853/3 CORD, AROMATIC POLYAMIDE, NONMELTING 550 POUNDS (2445 N), 165 FOOT/POUNDS (110 M/KG)

NO REPLACEMENT

AMS3871 GLAZED CERAMIC SHEET 95% ALUMINA NO REPLACEMENT

AMS3904/4 YARN, ORGANIC FIBER (PARA-ARAMID) INTERMEDIATE MODULUS 1000 DENIER, 1.5% FINISH FOR WEAVING

NO REPLACEMENT

AMS3911 FABRICATION OF SANDWICH PANELS FOR LIGHT WEIGHT PORTABLE SHELTERS

NO REPLACEMENT

AMS4001 ALUMINUM SHEET AND PLATE 0.12CU (1100-0) ANNEALED - UNS A91100 ASTM B209

AMS4003 ALUMINUM ALLOY, SHEET AND PLATE 0.12 CU (1100-H14) STRAIN HARDENED - UNS A91100

ASTM B209

AMS4005 ALUMINUM ALLOY FOIL 5.0MG - 0.12MN - 0.12CR (5056-H191) STRAIN HARDENED - UNS A95056

NO REPLACEMENT

AMS4006 ALUMINUM ALLOY, SHEET AND PLATE 1.25MN - 0.12CU (3003-0) ANNEALED - UNS A93003

ASTM B209

Pub. No. 24230


19


AMS4007 ALUMINUM ALLOY FOIL 4.4CU - 1.5MG - 0.6MN (2024-0) NO REPLACEMENT

AMS4008 ALUMINUM ALLOY, SHEET AND PLATE 1.25MN - 0.12CU (3003-H14) STRAIN HARDENED - UNS A93003

ASTM B209

AMS4010 ALUMINUM ALLOY FOIL 1.2MN - 0.12CU (3003-H18) - UNS A93003 NO REPLACEMENT

AMS4018 ALUMINUM ALLOY SHEET AND PLATE 3.5MG - 0.25CR (5154-0) NO REPLACEMENT

AMS4020 ALUMINUM ALLOY PLATE, ALCLAD 1.0MG - 0.60SI - 0.28CU - 0.25CR (ALCLAD 6061-T651)

AMS4023

AMS4022 ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 1.0MG - 0.60SI - 0.28CU - 0.20CR (ALCLAD 6061; -T4 SHEET, -T451 PLATE)

NO REPLACEMENT

AMS4024 ALUMINUM ALLOY SHEET AND PLATE 4.3ZN - 3.3MG - 0.60CU - 0.20MN - 0.17CR (7079; -T6 SHEET, -T651 PLATE) - UNS A97079

NO REPLACEMENT

AMS4030 ALUMINUM ALLOY SHEET AND PLATE COPPER MANGANESE MAGNESIUM (17SO)

NO REPLACEMENT

AMS4032 ALLUMINUM ALLOY SHEET AND PLATE COPPER MANGANESE MAGNESIUM (17S-T)

NO REPLACEMENT

AMS4034 ALUMINUM ALLOY PLATE,ALCLAD 4.4CU-1.5MG-0.60M AMS4041

Pub. No. 24230


20


AMS4042 ALUMINUM ALLOY SHEET & PLATE,ALCLAD 4.5CU-1.5MG NO REPLACEMENT

AMS4043 ALUMINUM ALLOY PLATE 1.0MG - 0.60SI - 0.28CU - 0.25CR (6061-T451) AMS4026

AMS4047 ALUMINUM ALLOY SHEET AND PLATE, ALUMINUM ALLOY CLAD, ROLL TAPERED 5.6ZN - 2.5MG - 1.6CU - 0.25CR (ALC 7075-T6)

NO REPLACEMENT

AMS4051 ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 6.8ZN - 2.8MG - 2.0CU - 0.23CR (ALCLAD 7178-0) ANNEALED

NO REPLACEMENT

AMS4052 ALUMINUM ALLOY SHEET & PLATE, ALUMINUM ALLOY CLAD NO REPLACEMENT

AMS4053 ALUMINUM ALLOY PLATE 1.0MG-0.60SI-0.28CU-0.25CR (6061-T651) NO REPLACEMENT

AMS4054 ALUMINUM ALLOY SHEET, CLAD ONE SIDE 0.6MG - 0.28CU (NO. 21-0 BRAZING SHEET) ANNEALED

AMS4255

AMS4055 ALUMINUM ALLOY SHEET, CLAD TWO SIDES 0.6MG - 0.28CU (NO. 22-0 BRAZING SHEET) ANNEALED - UNS A86951

AMS4256

AMS4057 ALUMINUM ALLOY, SHEET 4.4MG - 0.70MN - 0.15CR (5083-H323) - UNS A95083 NO REPLACEMENT

AMS4058 ALUMINUM ALLOY SHEET 4.4MG - 0.70MN - 0.15CR (5083-H343) - UNS A95083 NO REPLACEMENT

Pub. No. 24230


21


AMS4059 ALUMINUM ALLOY SHEET AND PLATE 4.4MG - 0.70MN - 0.15CR (5083-H321) - UNS A95083

NO REPLACEMENT

AMS4060 ALUMINUM ALLOY SHEET & PLATE, ALCLAD 4.5CU-1.5MG NO REPLACEMENT

AMS4062 ALUMINUM ALLOY, DRAWN SEAMLESS ROUND TUBING (1100-H14) STRAIN HARDENED - UNS A91100

ASTM B210/B210M

AMS4065 ALUMINUM ALLOY, DRAWN SEAMLESS TUBING 1.2MN - 0.12CU (3003-0) ANNEALED - UNS A93003

ASTM B210/B210M

AMS4067 ALUMINUM ALLOY, DRAWN ROUND SEAMLESS TUBING 1.25MN - 0.12CU (3003-H14) STRAIN HARDENED - UNS A93003

ASTM B210/B210M

AMS4072 ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 4.5CU - 1.5MG - 0.60MN (ALCLAD 2024-T86) WIDTH 30 IN. AND UNDER

NO REPLACEMENT

AMS4073 ALUMINUM ALLOY SHEET AND PLATS, ALCLAD 4.5CU - 1.5MG - 0.60MN (ALCLAD 2024-T86) WIDTH OVER 30 TO 48 I N . , INCL

NO REPLACEMENT

AMS4074 ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 4.5CU - 1.5MG - 0.60MN (IILCLAD 2024-T86) WIDTH OVER 43 TO 60 IN., INCL

NO REPLACEMENT

AMS4075 ALUMINUM ALLOY SHEET AIMD PLATE, ALCLAD 4.5CU - 1.5MG - 0.60MN (ALCLAD 2024-T86) WIDTH OVER 60 INCHES

NO REPLACEMENT

AMS4092 ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN (6062-T6) AMS4082

Pub. No. 24230


22


AMS4097 ALUMINUM ALLOY SHEET AND PLATE 4.5CU - 1.5MG - 0.60MN (2024-T36) V/IDTH 4B I N . AND UNDER

NO REPLACEMENT

AMS4099 ALUMINUM ALLOY SHEET AND PLATE 4.5CU - 1.5MG - 0.60MN (2024-T36) WIDTH OVER 60 INCHES

NO REPLACEMENT

AMS4102 ALUMINUM ALLOY BARS, RODS, AND WIRE, ROLLED OR COLD-FINISHED 99.0AL (1100-F) AS FABRICATED - UNS A91100

ASTM B211/B211M

AMS4103 ALUMINUM ALLOY SHEET AND PLATE 4-5CU - 1.5MG - 0.60MN (2024-T36) WIDTH 30 IN. AND UNDER

NO REPLACEMENT

AMS4104 ALUMINUM ALLOY SHEET AND PLATE 4.5CU - 1.5MG - 0.60MN (2024-T86) WIDTH OVER 30 TO 43 I N . , INCL

NO REPLACEMENT

AMS4105 ALUMINUM ALLOY SHFLT AND PLATE 4.5CU - 1.5MG - 0.60MN (2024-T86) WIDTH OVER 48 TO 60 IN., INCL

NO REPLACEMENT

AMS4106 ALUMINUM ALLOY SHEET AND PLATE 4.5CU - 1.5MG - 0.60MN (2024-T86) WIDTH OVER 60 INCHES

NO REPLACEMENT

AMS4109 ALUMINUM ALLOY HAND FORGINGS 5.6ZN - 2.5MG - 1.6CU - 0.24CR (7175- T736) - UNS A97175

AMS4149

AMS4110 ALUMINUM ALLOY BARS & RODS, ROLLED OR COLD FINISHED AMS4118

AMS4112 ALUMINUM ALLOY BARS, RODS, AND WIRE 4.4CU - 11.5MG - 0.6MN (2024-T6) ROLLED, DRAWN, OR COLD FINISHED - UNS A92024

AMS4339

Pub. No. 24230


23


AMS4114 ALUMINUM ALLOY BARS AND RODS, ROLLED OR COLD-FINISHED 2.5MG - 0.25CR (5052-F) AS FABRICATED - UNS A95052

ASTM B211/B211M

AMS4119 BARS AND RODS, ROLLED OR COLD FINISHED 4.4CU - 1.5MG - 0.60MN STRESS-RELIEF STRETCHED - UNS A92024

AMS4120

AMS4129 ALUMINUM ALLOY BARS , ROLLED OR COLD FINISHED 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T651) STRESS-RELIEF STRETCHED

AMS4117

AMS4135 ALUMINUM ALLOY FORGINGS 4.5CU - 0.85SI - 0.80MN - 0.50MG SOLUTION AND PRECIPITATION HEAT TREATED - UNS A92014

AMS4133

AMS4137 ALUMINUM ALLOY FORGINGS 7.5ZN-1.6MG-0.7CU-0.55MN (76S-T6) NO REPLACEMENT

AMS4138 ALUMINUM ALLOY FORGINGS 4.3ZN - 3.3MG - 0.60CU - 0.20MN - 0.18CR (7079-T6)

NO REPLACEMENT

AMS4139 ALUMINUM ALLOY FORGINGS 5.6ZN - 2.5MG - 1.6CU - 0.25CR (7075-T6) AMS4126

AMS4142 ALUMINUM ALLOY FORGINGS 4CU - 2NI - 1.5MG - 0.7SI (2218-F) AS FABRICATED - UNS A92218

NO REPLACEMENT

AMS4145 ALUMINUM ALLOY FORGINGS 12.2SI - 1.1MG - 0.9CU - 0.9NI (32S-T6) NO REPLACEMENT

AMS4158 ALUMINUM ALLOY EXTRUSIONS 6.8ZN-2.75MG-2.0CU NO REPLACEMENT

Pub. No. 24230


24


AMS4166 ALUMINUM ALLOY, EXTRUSIONS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73) SOLUTION HEAT TREATED AND OVERAGED - UNS A97075

AMS4617

AMS4167 ALUMINUM ALLOY, EXTRUSIONS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73511) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED - UNS A97075

AMS4617

AMS4168 ALUMINUM ALLOY, EXTRUSIONS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T6510) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND PRECIPITATION HEAT TREATED, UNSTRAIGHTENED - UNS A97075

AMS4154

AMS4169 ALUMINUM ALLOY, EXTRUSIONS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T6511) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED AND PRECIPITATION HEAT TREATED - UNS A97075

AMS4154

AMS4170 ALUMINUM ALLOY IMPACT EXTRUSIONS 5.6ZN - 2.5MG - 1.6CU - 0.?5CR (75S-T6) NO REPLACEMENT

AMS4171 ALUMINUM ALLOY EXTRUSIONS 4.3ZN - 3.3MG - 0.60CU - 0.20MN - 0.18CR (7079 -T6)

NO REPLACEMENT

AMS4180 ALUMINUM WIRE 99.0AL MINIMUM (1100-H18) - UNS A91100 ASTM B211/B211M

AMS4187 BARS, AND RODS, ROLLED, DRAWN, OR COLD FINISHED 5.6ZN - 2.5MG - 1.6CU - 0.23CR ANNEALED - UNS A97075

NO REPLACEMENT

AMS4188 ALUMINUM ALLOY WELDING WIRE AMS4246, AMS4181, AMS4245, AMS4233, AMS4244

AMS4188/1 ALUMINUM ALLOY, WELDING, WIRE, 4.5CU - 0.70AG - 0.3MN - 0.25MG - 0.25TI (A201.0)

AMS4233

Pub. No. 24230


25


AMS4188/4 ALUMINUM ALLOY WELDING WIRE 7.0SI - 0.30MG (A356.0) AMS4188

AMS4188/5 ALUMINUM ALLOY, WELDING, WIRE 7.0SI - 0.52MG (357.0) AMS4246

AMS4192 ALUMINUM ALLOY SHEET AND PLATE 4.4CU - 1.5MG - 0.60MN (2024 -T361) - UNS A92024

NO REPLACEMENT

AMS4196 ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 5.6ZN - 2.5MG - 1.6CU - 0.26CR (7011 ALCLAD 7075-0)

NO REPLACEMENT

AMS4198 ALUMINUM ALLOY SHEET PLATE ALCLAD 4.3ZN - 3MG - 0.6CU - 0.20MN - 0.17CR (7011 ALCLAD 7079-0)

NO REPLACEMENT

AMS4199 ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 4.3ZN - 3.3MG - 0.6CU - 0.20MN - 0.17CR (7011 ALCLAD 7079; -T6 STEEL -T561 PLATE) - UNS A87079

NO REPLACEMENT

AMS4220 ALUMINUM ALLOY CASTINGS, SAND 4CU - 2NI - 1.5MG - 0.2CR (A142-T75) SOLUTION TREATED AND OVERAGED

NO REPLACEMENT

AMS4224 ALUMINUM ALLOY CASTINGS, SAND 4.0CU - 2.1NI - 2.0MG - 0.30CR - 0.30MN - 0.13T - 0.13V (243.0) STABILIZED - UNS A02430

NO REPLACEMENT

AMS4228 ALUMINUM ALLOY CASTINGS, HIGH STRENGTH 4.5CU - 0.70AG - 0.30MN - 0.25MG - 0.25TI (201.0-T6) SOLUTION AND PRECIPITATION HEAT TREATED

NO REPLACEMENT

AMS4230 ALUMINUM ALLOY CASTINGS, SAND 4.5CU(195-T4) SOLUTION TREATED - UNS A02950

NO REPLACEMENT

Pub. No. 24230


26


AMS4231 CASTINGS, SAND 4.5CU - 1.1SI SOLUTION AND PRECIPITATION HEAT TREATED NO REPLACEMENT

AMS4234 ALUMINUM ALLOY CASTINGS SAND SECONDARY 4 COPPER SOLUTION AND PRECIPITATION (S195-T6)

NO REPLACEMENT

AMS4237 ALUMINUM ALLOY CASTINGS, SAND 4.6CU - 0.35MN - 0.25MG - 0.22TI (206.0 -T71) SOLUTION HEAT TREATED AND NATURALLY AGED - UNS A02060

NO REPLACEMENT

AMS4238 ALUMINUM ALLOY CASTINGS, SAND 6.8MG - 0.18TI - 0.18MN (535.0-F) AS CAST NO REPLACEMENT

AMS4239 ALUMINUM ALLOY CASTINGS, SAND 6.8MG - 0.18TI - 0.18MN (535.0-0) ANNEALED

NO REPLACEMENT

AMS4240 CASTINGS, SAND 10MG SOLUTION HEAT TREATED AND NATURALLY AGED NO REPLACEMENT

AMS4253 ALUMINUM ALLOY-ARAMID FIBER REINFORCED-LAMINATED SHEET 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T61) 3, 5, 7, OR 9 PLY

NO REPLACEMENT

AMS4263 ALUMINUM SILICON BRONZE BARS, RODS, AND FORGINGS 90CU - 7.0A1 - 1.9SI DRAWN AND STRESS RELIEVED (HR50) - UNS C64200

AMS4633

AMS4264 BRONZE, ALUMINUM SILICON RODS, BARS, AND FORGINGS 90CU - 7.0A1 - 1.8SI DRAWN AND STRESS RELIEVED (HR50) - UNS C64200

AMS4633

AMS4265 ALUMINUM ALLOY, PARTICULATE REINFORCED EXTRUSIONS 6092/SIC/25P - T6P SOLUTION HEAT TREATED, QUENCHED, AND PRECIPITATION HEAT TREATED

NO REPLACEMENT

Pub. No. 24230


27


AMS4267 ALUMINUM ALLOY, SHEET (7055-O) 8.0ZN - 2.3CU - 2.0MG - 0.16ZR ANNEALED - UNS A97055

NO REPLACEMENT

AMS4282 ALUMINUM ALLOY CITINGS, PERMANENT MOLD 4.5CU - 2.5SI (B195-T6) SOLUTION AND PRECIPITATION TREATED

NO REPLACEMENT

AMS4283 ALUMINUM ALLOY CASTINGS, PERMANENT MOLD 4.5CU - 2.5S1 (B195-T4) SOLUTION TREATED

NO REPLACEMENT

AMS4294 ALUMINUM ALLOY EXTRUSIONS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T5511) PRESS HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND ARTIFICIALLY AGED - UNS A96061

NO REPLACEMENT

AMS4301 BORON-ALUMINUM COMPOSITE SHEET 50 V/O 5.6B, 2024-0, FOR DIFFUSION BONDING

NO REPLACEMENT

AMS4318 ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS 12.2SI - 1.0MG - 0.90CU - 0.90NI (4032-T86) SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED - UNS A94032

NO REPLACEMENT

AMS4322 ALUMINUM ALLOY, DIE FORGINGS 4.0MG - 1.3LI - 1.2C - 0.45O (AL-905XL), MECHANICALLY ALLOYED, AS-FABRICATED

NO REPLACEMENT

AMS4346 ALUMINUM ALLOY PLATE 2.7CU - 2.2LI - 0.12ZR - SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED - UNS A92090

AMS4303

AMS4358 MAGNESIUM ALLOY FORGINGS AZ61X NO REPLACEMENT

AMS4360 MAGNESIUM ALLOY FORGINGS 8.5AL - 0.50ZN (AZ80A- T5) NO REPLACEMENT

Pub. No. 24230


28


AMS4363 FORGINGS, MAGNESIUM ALLOY 2.0TH - 0.78MN (HM21A - T5) PRECIPITATION HEAT TREATED - UNS M13210

NO REPLACEMENT

AMS4370 MAGNESIUM ALUMINUM SHEET M1A-O ANNEALED NO REPLACEMENT

AMS4380 MAGNESIUM ALLOY SHEET (AZ51X) ANNEALED NO REPLACEMENT

AMS4383 MAGNESIUM ALLOY, SHEET AND PLATE 2.0TH - 0.78MN SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED - UNS M13210

NO REPLACEMENT

AMS4384 MAGNESIUM ALLOY, SHEET AND PLATE 3.2TH - 0.70ZR ANNEALED RECRYSTALLIZED - UNS M13310

NO REPLACEMENT

AMS4386 MAGNESIUM ALLOY SHEET AND PLATE 14LI - 1.25AI (LA 141 A-T7) NO REPLACEMENT

AMS4388 MAGNESIUM ALLOY EXTRUSIONS 3.0TH - 1.5MN (HM31A-F) AS EXTRUDED NO REPLACEMENT

AMS4389 MAGNESIUM ALLOY, EXTRUSIONS 3.0TH - 1.5MN (HM31A-T5) PRECIPITATION HEAT TREATED - UNS M13312

NO REPLACEMENT

AMS4390 SHEET AND PLATE, MAGNESIUM ALLOY 2.0TH - 0.78MN (HM21A-T8) SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED - UNS M13210

NO REPLACEMENT

AMS4397 MAGNESIUM WIRE, WELDING 14LI - 1.25AL (LA 141A) NO REPLACEMENT

Pub. No. 24230


29


AMS4419 MAGNESIUM ALLOY CASTINGS, SAND 2.5AG - 1.1TH - 1.0DI - 0.70ZR (QH21-T6) SOLUTION AND PRECIPITATION HEAT TREATED - UNS M12350

NO REPLACEMENT

AMS4422 MAGNESIUM ALLOY CASTINGS, SAND 6.0AL - 3.0ZN (AZ63 - T4) SOLUTION HEAT TREATED - UNS M11630

NO REPLACEMENT

AMS4438 MAGNESIUM ALLOY CASTINGS, SAND 5.7ZN - 1.8TH (ZH62A-T5) PRECIPITATION HEAT TREATED - UNS M16620

NO REPLACEMENT

AMS4440 MAGNESIUM ALLOY CASTINGS, SAND 3.5CE - 0.70ZR (EK41A-T5) PRECIPITATION HEAT TREATED - UNS M12410

NO REPLACEMENT

AMS4441 MAGNESIUM ALLOY CASTINGS, SAND 3.5CE - 0.70ZR (EK41A-T6) SOLUTION AND PRECIPITATION HEAT TREATED

NO REPLACEMENT

AMS4447 MAGNESIUM ALLOY CASTINGS, SAND 3.3TH - 2.1ZN - 0.75ZR (HZ32A-T5) PRECIPITATION HEAT TREATED - UNS M13320

NO REPLACEMENT

AMS4615 SILICON BRONZE RODS AND BARS, 95.5CU-3.2SI, HARD TEMPER - UNS C65500 NO REPLACEMENT

AMS4619 MANGANESE BRONZE FORGINGS 58CU - 39.8ZN - 1.05FE - 0.95A1 - 0.23MN - UNS 37700

NO REPLACEMENT

AMS4630 ALUMINUM BRONZE BARS, RODS, TUBING, AND FORGINGS 90CU - 8.5A1 SOFT NO REPLACEMENT

AMS4632 ALUMINUM BRONZE BARS AND RODS 90CU - 8.5AL HARD NO REPLACEMENT

Pub. No. 24230


30


AMS4665 SILICON BRONZE TUBING, SEAMLESS 96CU - 3.2SI ANNEALED NO REPLACEMENT

AMS4732 COPPER-NICKEL ALLOY WIRE AND RIBBON 77.5CR - 22.5NI - UNS C71110 NO REPLACEMENT

AMS4755 SOLDER, LEAD-SILVER 94PB - 5.5AG ASTM B32

AMS4756 SOLDER 97.5PB - 1.5AG - 1SN ASTM B32

AMS4789 SILVER ALLOY BRAZING FILLER METAL 56AG - 22CU - 17ZN - 5.0SN 1152 TO 1205 °F (618 TO 652 °C) SOLIDUS-LIQUIDUS RANGE

AMS4763

AMS4815 BEARINGS, SILVER PLATED STEEL BACK NO REPLACEMENT

AMS4816 BEARINGS, SILVER-CLAD STEEL STRIP NO REPLACEMENT

AMS4817 BEARINGS – CAST SILVER STEEL BACK NO REPLACEMENT

AMS4822 BEARINGS, LEADED BRONZE 71.5CU – 25PB – 3.0SN STEEL BACK NO REPLACEMENT

AMS4825 BEARINGS, LEADED BRONZE 74CU - 15.5PB - 10SN STEEL BACK NO REPLACEMENT

Pub. No. 24230


31


AMS4840 LEADED BRONZE CASTINGS 70CU-24.5PB-5.5SN NO REPLACEMENT

AMS4846 TIN BRONZE CASTINGS, SAND AND CENTRIFUGAL 86.5CU-11.2SN-2.0ZN AS CAST

NO REPLACEMENT

AMS4872 ALUMINUM BRONZE CASTING, SAND 85CU - 11.2A1 - 3.6FE AS CAST NO REPLACEMENT

AMS4906 TITANIUM ALLOY SHEET AND STRIP 6A1 - 4V, CONTINUOUSLY ROLLED, ANNEALED - UNS R56400

NO REPLACEMENT

AMS4908 TITANIUM ALLOY, SHEET AND STRIP 8MN ANNEALED, 110 KSI (758 MPA) YIELD STRENGTH - UNS R56080

NO REPLACEMENT

AMS4912 TITANIUM ALLOY SHEET AND STRIP 4A1 - 3MO - 1V SOLUTION HEAT TREATED - UNS R56430

NO REPLACEMENT

AMS4913 TITANIUM ALLOY SHEET AND STRIP 4AL - 3MO - 1V SOLUTION AND PRECIPITATION TREATED - UNS R56430

NO REPLACEMENT

AMS4923 TITANIUM ALLOY BARS AND FORGINGS 2CR – 2FE – 2MO ANNEALED, 120,000 PSI YIELD

NO REPLACEMENT

AMS4925 TITANIUM ALLOY BARS AND FORGINGS 4A1 - 4MN ANNEALED, 130,000 PSI YIELD - UNS R56440

NO REPLACEMENT

AMS4968 TITANIUM ALLOY BARS AND FORGINGS 5ZR – 5AL – 5SN ANNEALED NO REPLACEMENT

Pub. No. 24230


32


AMS4977 TITANIUM ALLOY BARS 11.5MO - 6.0ZR - 4.5SN 1275 – 1350 °F (690 - 730 °C) SOLUTION HEAT TREATED - UNS R58030

NO REPLACEMENT

AMS4995 BILLETS AND PREFORMS 5AL - 2SN - 2ZR - 4CR - 4MO - 0.100 PREMIUM QUALITY, POWDER-METALLURGY PRODUCT

NO REPLACEMENT

AMS4997 TITANIUM ALLOY POWDER 5AL - 2SN - 2ZR - 4CR - 4MO - 0.100 PREMIUM QUALITY - UNS R58650

NO REPLACEMENT

AMS5020 STEEL BARS, FORGINGS, AND TUBING, FREE-CUTTING 1.5MN – 0.25PB (0.32 – 0.39C) (11L37)

NO REPLACEMENT

AMS5025 STEEL – FREE CUTTING MANGANESE (HEAT TREATED) NO REPLACEMENT

AMS5041 STEEL SHEET AND STRIP 0.08 MAX CARBON EXTRA DEEP DRAWING GRADE, SPECIAL KILLED

NO REPLACEMENT

AMS5053 STEEL TUBING, WELDED 0.13 CARBON, MAXIMUM ANNEALED - UNS G10100 NO REPLACEMENT

AMS5077 STEEL TUBING, WELDED (0.22 - 0.28C) (SAE 1025) NORMALIZED OR STRESS RELIEVED - UNS G10250

NO REPLACEMENT

AMS5210 STEEL CASTINGS, INVESTMENT, ELECTRICAL INDUCTION MELTED, ANNEALED NO REPLACEMENT

AMS5310 IRON CASTINGS, PEARLITIC MALLEABLE - UNS F23330 NO REPLACEMENT

Pub. No. 24230


33


AMS5335 STEEL CASTINGS, SAND 0.65CR - 0.75NI - 0.20MO (0.25 - 0.33C) (SAE 8630 MODIFIED) NORMALIZED AND TEMPERED

NO REPLACEMENT

AMS5359 STEEL CASTINGS, SAND, CORROSION AND HEAT RESISTANT 15CR - 4.0NI - 2.3MO - 0.08N SOLUTION HEAT TREATED - UNS J92001

NO REPLACEMENT

AMS5369 STEEL CASTINGS, SAND, CORROSION AND HEAT RESISTANT 19.5CR - 9.5NI - 1.4MO - 1.4W - 0.50 (CB+TA) - 0.32TI SOLUTION AND PRECIPITATION HEAT TREATED - UNS J92843

NO REPLACEMENT

AMS5371 STEEL CASTINGS, SAND, CORROSION AND HEAT RESISTANT 19.5CR - 9.5NI (LOW CARBON) (304L) SOLUTION HEAT TREATED - UNS J92620

NO REPLACEMENT

AMS5372 STEEL CASTINGS, SAND, CORROSION RESISTANT 16CR - 1.9NI (TYPE 431 MOD) NORMALIZED AND TEMPERED - UNS J91601

NO REPLACEMENT

AMS5375 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 65.5CO - 25CR - 1.8NI - 5.0W AS CAST - UNS R30023

NO REPLACEMENT

AMS5378 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 65.5CO - 25CR - 1.8NI - 5.0W AS CAST - UNS R30023

NO REPLACEMENT

AMS5392 ALLOY IRON CASTINGS, SAND, MODERATE CORROSION AND HEAT RESISTANT 2.1CR - 15NI - 6.5CU (2.4 - 2.8C) AS CAST - UNS F47004

ASTM A439/A439M

AMS5393 ALLOY IRON CASTINGS, SAND, MODERATE CORROSION AND HEAT RESISTANT 2.0CR-20NI (2.4-2.8C) STRESS RELIEVED - UNS F47005

ASTM A439/A439M

AMS5394 ALLOY IRON CASTINGS, DUCTILE, SAND, CORROSION AND HEAT RESISTANT 2.0CR - 20NI (2.4 - 3.0C) STRESS RELIEVED - UNS F47006

ASTM A439/A439M

Pub. No. 24230


34


AMS5403 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 60NI - 14CR - 9.5CO - 4.0MO - 4.0W - 5.0TI - 3.0AL - 0.015B - 0.06ZR VACUUM MELTED, VACUUM CAST

NO REPLACEMENT

AMS5404

ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 59NI - 12.6CR - 9.0CO - 1.9MO - 4.2W - 4.0TI - 4.2TA - 3.4AL - 0.015B - 0.10ZR - 0.90HF VACUUM MELTED, VACUUM CAST SOLUTION AND PRECIPITATION HEAT TREATED

NO REPLACEMENT

AMS5405 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 64NI - 8.0CR - 10CO - 6.0MO - 1.0TI - 4.2TA - 6.0AL - 0.015B - 0.08ZR VACUUM MELTED, VACUUM CAST AS CAST

NO REPLACEMENT

AMS5406 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 63NI - 8.0CR - 10CO - 6.0MO - 1.0TI - 4.2TA - 6.0AL - 0.015B - 0.03ZR - 1.2HF VACUUM MELTED, VACUUM CAST AS CAST

NO REPLACEMENT

AMS5407 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 60NI - 9.0CR - 10CO - 12.5W - 1.0CB - 2.0TI - 5.0AL - 0.015B - 0.06ZR VACUUM MELTED, VACUUM CAST AS CAST

NO REPLACEMENT

AMS5408 ALLOY CASTINGS, CENTRIFUGAL, CORROSION AND HEAT RESISTANT 64NI - 16CR - 15MO - 0.30AL - 0.05LA SOLUTION HEAT TREATED

NO REPLACEMENT

AMS5502 STEEL SHEET AND STRIP LOW HEAT RESISTANT 5CR - 0.5MO NO REPLACEMENT

AMS5509 ALLOY SHEET AND STRIP, CORROSION AND HEAT RESISTANT 15 CR - 45NI - 4W - 4MO - 3TI - 1AL CONSUMABLE ELECTRODE VACUUM MELTED - UNS N09979

NO REPLACEMENT

AMS5522 STEEL SHEET, STRIP, PLATE, CORROSION AND HEAT RESISTANT 25CR - 20NI - 2.0SI (314) SOLUTION HEAT TREATED - UNS S31400

NO REPLACEMENT

Pub. No. 24230


35


AMS5526 STEEL SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 19.5CR - 9.5NI - 1.4MO - 1.4W - 0.42(CB+TA) - 0.22TI SOLUTION HEAT TREATED - UNS K63198

NO REPLACEMENT

AMS5527 STEEL SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 20CR - 9NI - 1.4MO - 1.4 (CB + TA) - 0.2TI HOT ROLLED AND STRESS RELIEVED - UNS K63198

NO REPLACEMENT

AMS5531 STEEL SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 30FE - 21CR - 20NI - 20CO - 3.

AMS5532

AMS5534 ALLOY SHEET AND STRIP, CORROSION AND HEAT RESISTANT COBALT BASE - 20CR - 20NI - 4MO - 4W - 4CB - UNS R30816

NO REPLACEMENT

AMS5535 ALLOY SHEET AND STRIP, CORROSION AND HEAT RESISTANT COBALT BASE - 25.5CR - 20NI - 4MO - 2W -2(CB+TA)

NO REPLACEMENT

AMS5538 STEEL SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 19.5CR - 9.5NI - 1.6MO - 1.4W - 0.58TI - UNS S63199

AMS5526

AMS5543 STEEL SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 13.5CR - 26NI - 1.75MO - 3.0TI - 0.07B VACUUM MELTED, SOLUTION HEAT TREATED - UNS S66545

NO REPLACEMENT

AMS5551 ALLOY SHEET AND STRIP, CORROSION AND HEAT RESISTANT 55NI - 19CR - 10CO - 10MO - 2.5TI - 1.0AL - 0.006B CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION HEAT TREATED - UNS N07252

NO REPLACEMENT

AMS5579 STEEL, CORROSION AND HEAT RESISTANT, TUBING WELDED 19.5CR - 9.5NI - 1.4MO -1.4W - 0.42(CB + TA) - 0.22TI THIN WALL - UNS S63198

NO REPLACEMENT

Pub. No. 24230


36


AMS5594 STEEL PLATE, CORROSION AND MODERATE HEAT RESISTANT 15.5CR - 4.5NI - 2.9MO - 0.1N EQUALIZED AND OVERTEMPERED - UNS S35500

NO REPLACEMENT

AMS5615 STEEL BARS AND FORGINGS CORROSION AND MODERATE HEAT RESISTANT 12.5CR - 1.9NI (SAE 51414) ANNEALED

NO REPLACEMENT

AMS5619 STEEL BARS AND FORGINGS, CORROSION RESISTANT 14CR - 4.0MO (1.00 - 1.10C)

NO REPLACEMENT

AMS5626 STEEL, TOOL, HIGH SPEED, BARS AND FORGINGS NO REPLACEMENT

AMS5633

ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT 38FE - 13.2CR - 38NI - 5.5 MO - 0.85CB - 2.5TI - 1.6AL - 0.009B CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE - UNS N09027

NO REPLACEMENT

AMS5634 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT 38FE - 13.2CR - 38NI - 5.5MO - 0.85CB - 2.5TI - 1.6AL - 0.009B CONSUMABLE ELECTRODE MELTED, SOLUTION AND PRECIPITATION HEAT TREATED - UNS N09027

NO REPLACEMENT

AMS5658 STEEL BARS, FORGINGS, AND RINGS, CORROSION RESISTANT 15CR - 4.5NI -0.30 (CB + TA) - 3.5CU.

AMS5659

AMS5673 STEEL WIRE, CORROSION RESISTANT 17CR - 7.1NI - 1.1AL PRECIPITATION HARDENABLE, SPRING TEMPER - UNS S17700

AMS5678

AMS5681 WELDING ELECTRODES, COVERED, STEEL, CORROSION AND HEAT RESISTANT 19.5CR -10NI - 0.60 (CB+TA) - UNSW34710

AWS A5.4/A5.4M

Pub. No. 24230


37


AMS5684 ALLOY WELDING ELECTRODES, COVERED, CORROSION AND HEAT RESISTANT 72NI - 15CR - 9.0FE - 2.8 (CB + TA) - UNSN06132

AWS A5.11/A5.11M

AMS5685 STEEL, CORROSION RESISTANT, SAFETY WIRE, 18CR - 11.5NI (SAE 30305) SOLUTION HEAT TREATED, COLD FINISHED - UNS S30500

AS5685

AMS5695 STEEL, CORROSION AND HEAT RESISTANT, COVERED WELDING ELECTRODES 25CR - 20NI (SAE 30310) - UNS W31010

AWS A5.4/A5.4M

AMS5705 STEEL, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS 2.5SI - 12.8CR - 8.0NI ANNEALED - UNS S63005

NO REPLACEMENT

AMS5710 STEEL, BARS AND FORGINGS, CORROSION AND HEAT-RESISTANT 20CR - 2.2SI - 1.3NI (0.76 - 0.86) - UNS S65006

NO REPLACEMENT

AMS5720 STEEL BARS, CORROSION AND HEAT RESISTANT 20CR - 9NI - 1.4MO - 1.4W - -0.42(CB + TA) - 0.22TI - UNS K63198

NO REPLACEMENT

AMS5721 STEEL BARS, CORROSION AND HEAT RESISTANT 20CR - 9NI - 1.4MO - 1.4W - 0.42(CB + TA) - 0.22TI - UNS K63198

AMS5732

AMS5722 STEEL BARS, FORCINGS, AND RINGS, CORROSION AND HEAT RESISTANT 19.5CR - 9.5NI - 1.4MO - 1.4W - 0.42(CB + TA) - 0.22TI - UNS K63198

NO REPLACEMENT

AMS5723 STEEL BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT 20CR - 9NI - 1.6MO - 1.4W - 0.6TI - UNS S63199

NO REPLACEMENT

AMS5724 STEEL, CORROSION AND HEAT RESISTANT 20CR - 9NI - 1.6MO - 1.4W - 0.6TI - UNS S63199

NO REPLACEMENT

Pub. No. 24230


38


AMS5725 BARS, CORROSION AND HEAT RESISTANT STEEL 16CR - 25.5NI - 6.2MO - 0.15N NO REPLACEMENT

AMS5727 STEEL FORCINGS, CORROSION AND HEAT RESISTANT 16CR - 25NI - 6MO NO REPLACEMENT

AMS5728 STEEL FORCINGS, CORROSION AND HEAT RESISTANT 16CR - 25NI - 6MO HOPKINS ELECTRIC INGOT PROCESS

NO REPLACEMENT

AMS5729 STEEL BARS, CORROSION AND HEAT RESISTANT 20CR - 9NI - 1.6MO - 1.4W - 0.6TI - UNS S63199

NO REPLACEMENT

AMS5733 BARS AND FORGINGS 13.5CR - 26NI - 3MO - 1.8TI - UNS S66220 AMS5732

AMS5735 STEEL BARS, FORGINGS, TUBING, AND RINGS, CORROSION AND HEAT RESISTANT 15CR - 26NI - 1.3MO - 2.1TI - 0.30V 1800 °F (982.2 D°C) SOLUTION AND PRECIPITATION HEAT TREATED - UND K66286

AMS5732

AMS5736 STEEL BARS, FORGINGS, TUBING, AND RINGS, CORROSION AND HEAT RESISTANT 15CR - 26NI - 1.3MO - 2.1TI - 0.30V 1800 °F (982.2 °C) SOLUTION HEAT TREATED - UNS K66286

AMS5731

AMS5739 STEEL, CORROSION AND MODERATE HEAT RESISTANT, BARS, FORGINGS, AND RINGS 14.5CR - 6.5NI - 0.72TI SOLUTION HEAT TREATED AND MARAGED, 180,000 PSI (1240 MPA) TENSILE STRENGTH - UNS S36200

NO REPLACEMENT

AMS5740 STEEL, CORROSION AND MODERATE HEAT RESISTANT, BARS, FORGINGS, AND RINGS 14.5CR - 6.5NI - 0.72TI SOLUTION HEAT TREATED AND MARAGED, 155,000 PSI (1070 MPA) TENSILE STRENGTH - UNS S36200

NO REPLACEMENT

AMS5741 STEEL BARS AND FORCINGS, CORROSION AND HEAT RESISTANT 13.5CR - 26NI - I.8M0 - 3.0TI - 0.02B CONSUMABLE ELECTRODE VACUUM MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED - UNS K66545

NO REPLACEMENT

Pub. No. 24230


39


AMS5742 ALLOY BARS, F0RGINGS, AND RINGS, CORROSION AND HEAT RESISTANT IRON BASE - 20.5CR - 32NI - L.ITI - UNS N08801

NO REPLACEMENT

AMS5748 STEEL BARS, FORGINGS, AND RINGS, CORROSION RESISTANT 14CR - 13.5CO - 5.0MO - 0.5NI - 0.20V PREMIUM QUALITY, CONSUMABLE ELECTRODE MELTED - UNS S65770

NO REPLACEMENT

AMS5753 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT 54NI - 17.5CR - 16.5CO - 4.0MO - 2.9TI - 2.9AL - 0.006B VACUUM MELTED, SOLUTION HEAT TREATED

NO REPLACEMENT

AMS5756 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT 54N1 - 19CR - LOCO - LOMO - 2.6T1 - 1.0A1 - 0.006B VACUUM MELTED, SOLUTION HEAT TREATED - UNS N07252

NO REPLACEMENT

AMS5761 STEEL BARS, F0RGINGS, AND RINGS, CORROSION RESISTANT 15CR - 20CO - 2.8MO SOLUTION HEAT TREATED - UNS S65150

NO REPLACEMENT

AMS5765 ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT 43CO - 20CR - 20NI - 4.0MO - 4.0W - 4.0 CB SOLUTION AND PRECIPITATION HEAT TREATED - UNS R30816

NO REPLACEMENT

AMS5767 ALLOY, CORROSION AND HEAT RESISTANT IRON – 20CR – 20NI – 20CO – 3MO – 2W – 1(CB+TA) PRECIPITATION TREATED

NO REPLACEMENT

AMS5770 ALLOY BARS AND F0RGINGS, CORROSION AND HEAT RESISTANT 25FE - 20.5CR - 20N1 - 20CO - 4.0MO - 4.0W - 4.0(CB + TA) SOLUTION AND PRECIPITATION HEAT TREATED - UNS R30590

NO REPLACEMENT

AMS5775 WELDING ELECTRODES, COVERED, CORROSION AND HEAT-RESISTANT STEEL 16.5CR - 4.5NI - 2.9MO - 0.10N - UNS W35010

NO REPLACEMENT

AMS5777 STEEL, CORROSION RESISTANT, COVERED WELDING ELECTRODES 12.5CR - UNS W41010

AWS A5.4/A5.4M

Pub. No. 24230


40


AMS5779 ALLOY WELDING ELECTRODES, COVERED, CORROSION AND HEAT RESISTANT 75NI - 15CR - 1.5 (CB+TA) - 1.9TI - 0.55AL - 5.5FE - UNS N07750

NO REPLACEMENT

AMS5781 STEEL WELDING ELECTRODES, COVERED, CORROSION AND MODERATE HEAT RESISTANT 15.5CR - 4.SNI - 2.9MO - 0.10N - UNS W35510

NO REPLACEMENT

AMS5783 STEEL, CORROSION AND HEAT RESISTANT WELDING ELECTRODES, COVERED 19.5CR - 8.8NI - 0.50MO - 1.5W - 1.0CB - UNS W34910

AWS A5.4/A5.4M

AMS5785 STEEL, WELDING ELECTRODE, COVERED, CORROSION AND HEAT RESISTANT 28.5CR - 9.5NI - UNS S64299; W31310

AWS A5.4/A5.4M

AMS5799 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, COVERED WELDING ELECTRODES 48NI - 22CR - 1.5CO - 9.0MO - 0.60W-18.5 FE - UNS W86002

AWS A5.11/A5.11M

AMS5809 ALLOY WELDING WIRE, CORROSION AND HEAT RESISTANT 52CO-20CR-20NI-7.5TA VACUUM MELTED

AMS5814

AMS5813 STEEL WIRE, WELDING, CORROSION AND MMODERATE HEAT RESISTANT 15CR-7.1NI-2.4MO-1.1AL - UNS S15700

NO REPLACEMENT

AMS5827 STEEL, CORROSION RESISTANT, COVERED WELDING ELECTRODES 16.4CR - 4.8NI - 0.22CB - 3.6CU - UNS W37410

AWS A5.4/A5.4M

AMS5851 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, POWDER 55NI - 15CR - 17CO - 5.OMO - 3.5TI - 4.OAI - 0.025B AS FABRICATED - UNS N13017

NO REPLACEMENT

AMS5852 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BILLETS AND PREFORMS 55NI - 15CR - 17CO - 5.0MO - 3.5TI - 4.0AL - 0.025B POWER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED - UNS N13017

NO REPLACEMENT

Pub. No. 24230


41


AMS5855 ALLOY POWDER, CORROSION AND HEAT RESISTANT 59.5NI - 12CR - 10CO - 3.0MO - 6.0W - 3.0TI - 1.5TA - 4.5AL - 0.015B - 0.10ZR (0.30 - 0.35C), AS FABRICATED - UNS N07012

NO REPLACEMENT

AMS5856 ALLOY BILLETS AND PREFORMS, CORROSION AND HEAT RESISTANT 59.5NI - 12CR - 10CO - 3.0MO - 6.0W - 3.0TI - 1.5TA - 4.5AL - 0.015B - 0.10ZR (0.30 - 0.35C), POWDER-METALLURGY PRODUCT - UNS N07012

NO REPLACEMENT

AMS5861 STEEL SHEET, STRIP, AND PLATE, CORROSION RESISTANT 22CR - 13NI - 5.0MN - 2.25MO - UNS S20910

NO REPLACEMENT

AMS5865 NICKEL, CORROSION AND HEAT RESISTANT, SHEET AND STRIP THORIA DISPERSION STRENGTHENED 2.2TH02 - UNS N03260

NO REPLACEMENT

AMS5880 STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS 17CR 0.52MO (0.95 1.20C) (SAE 51440C) FOR BEARING APPLICATIONS - UNS S44004

AMS5618

AMS5882

NICKEL ALLOY, CORROSION AND HEAT RESISTANT, FORGINGS 55NI - 15CR - 17CO - 5.0MO - 3.5TI - 4.0AL - 0.025B SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED POWDER- METALLURGY PRODUCT - UNS N13017

NO REPLACEMENT

AMS5890 NICKEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND EXTRUSIONS THORIA DISPERSION STRENGTHENED 2.2THO2 STRESS-RELIEVED - UNS N03260

NO REPLACEMENT

AMS5938

STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS 10CR - 12NI - 2MO – 1.45AL – 1.15TI VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE - UNS S11902

NO REPLACEMENT

AMS6242 STEEL BARS AND FORGINGS, CARBURIZING 5.0NI (0.15 - 0.20C) NO REPLACEMENT

Pub. No. 24230


42


AMS6275 STEEL BARS, FORGINGS, AND TUBING 0.40CR - 0.45NI - 0.12MO - 0.002B (0.15 - 0.20C) (SAE 94B17) - UNS G94171

NO REPLACEMENT

AMS6321 STEEL BARS, FORGINGS, AND TUBING, 0.42CR - 0.30NI - 0.12MO - 0.003B (0.38 - 0.43C) (81B40) - UNS K03810

NO REPLACEMENT

AMS6355 STEEL SHEET, STRIP, AND PLATE 0.50CR-0.55NI-0.20MO (0.28 - 0.33C) (SAE 8630) - UNS G86300

AMS6350

AMS6379 STEEL BARS 0.95CR - 0.20MO - 0.05TE (0.40 - 0.53C) (SAE 4140 MODIFIED) DIE DRAWN AND TEMPERED, 165,000 PSI (1138 MPA) YIELD STRENGTH

NO REPLACEMENT

AMS6380 STEEL .95 CR .2 MO (.35 - .42 C) NO REPLACEMENT

AMS6390 STEEL TUBING, MECHANICAL 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) - UNS G41400

AMS6381

AMS6410 STEEL NICKEL CHROMIUM MOLYBDENUM NO REPLACEMENT

AMS6416 STEEL BARS, FORGINGS, AND TUBING 1.6SI - 0.82CR - (0.41 - 0.46C) AMS6419

AMS6418 STEEL BARS, FORGINGS, TUBING, AND RINGS 1.3MN - 1.5SI - 0.30CR - 1.8NI - 0.40MO (0.23 - 0.28C) - UNS K32550

NO REPLACEMENT

AMS6432 STEEL BARS, FORGINGS, AND TUBING 1.05CR - 0.55NI - 1.0MO - 0.12V (0.43 - 0.49C)

NO REPLACEMENT

Pub. No. 24230


43


AMS6436 STEEL SHEET, STRIP, AND PLATE, LOW-ALLOY, HEAT RESISTANT 0.65SI - 1.25CR - 0.50MO - 0.85V (0.25 - 0.30C) ANNEALED - UNS K22770

NO REPLACEMENT

AMS6441 STEEL TUBING, MECHANICAL 1.45CR (0.98 - 1.10C) (SAE 50100) FOR BEARING APPLICATIONS

AMS6440

AMS6442 STEEL BARS AND FORGINGS 0.50CR (0.98 - 1.10C) (SAE 50100) FOR BEARING APPLICATIONS - UNS G50986

NO REPLACEMENT

AMS6443 STEEL BARS, FORGINGS, AND TUBING 1.0CR (0.98 - 1.10C) (SAE 51100) CONSUMABLE ELECTRODE VACUUM MELTED

NO REPLACEMENT

AMS6445 STEEL, BARS, FORGINGS, AND TUBING 1.05CR - 1.1MN (0.92 - 1.02C) (MODIFIED 51100) CONSUMABLE ELECTRODE VACUUM MELTED - UNS K22097

NO REPLACEMENT

AMS6446 STEEL, BARS, FORGINGS, AND TUBING 1.0CR (0.98 - 1.10C) (SAE 51100) ELECTROSLAG REMELTED - UNS G51986

NO REPLACEMENT

AMS6449 STEEL, BARS, FORGINGS, AND TUBING 1.0CR (0.98 - 1.10C) (SAE 51100) FOR BEARING APPLICATIONS

NO REPLACEMENT

AMS6464 WELDING ELECTRODES, COVERED, STEEL 1.05MO - 0.20V (0.06 - 0.12C) - UNS W10013

NO REPLACEMENT

AMS6467 STEEL WELDING ELECTRODES, COVERED 5CR - 0.55MO - UNS S50200 NO REPLACEMENT

AMS6473 STEEL WELDING WIRE 0.88CR - 1.8NI - 1.6CO - 0.42MO - 0.08V (0.28 - 0.33C) (SAE 4330V) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING

NO REPLACEMENT

Pub. No. 24230


44


AMS6478 STEEL, BARS AND FORGINGS 3.1CR - 11.5NI - 13.5CO - 1.2MO (0.21 - 0.25C) VACUUM MELTED, ANNEALED HEAT TREATABLE TO 290 KSI (1999 MPA) TENSILE STRENGTH - UNS K92580

AMS6532

AMS6480 STEEL, NITRIDING 0.65NI - 1CR - 1MO (0.32-0.38C) NO REPLACEMENT

AMS6485 STEEL BARS AND FORGINGS 5.0CR - 1.3MO - 0.50V (0.38 - 0.43C) - UNS T20811 AMS6487

AMS6488 STEEL, BARS AND FORGINGS 5.0CR - 1.3MO - 0.5V - (0.38 - 0.43C) - UNS T20811 NO REPLACEMENT

AMS6510 STEEL TUBING (WELDED) .95 CR .20 MO (.27 - .33C) NO REPLACEMENT

AMS6518 STEEL SHEET, STRIP, AND PLATE, MARAGING 19NI - 3.0MO - 1.4TI - 0.10AI DOUBLE VACUUM MELTED, SOLUTION HEAT TREATED

NO REPLACEMENT

AMS6521 STEEL SHEET, STRIP, AND PLATE, MARAGING 18.5NI - 9.0CO - 4.9MO - 0.65TI - 0.10AI CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED - UNS K93160

NO REPLACEMENT

AMS6524 STEEL, SHEET, STRIP, AND PLATE 1.0CR - 7.5NI - 4.5CO - 1.0MO - 0.09V (0.29 - 0.34C) CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED - UNS K91313

NO REPLACEMENT

AMS6530 STEEL TUBING, SEAMLESS, 0.50NI - 0.55CR - 0.20MO (0.28 - 0.33C) AMS6360

AMS6540 STEEL BARS, FORGINGS, TUBING,AND RINGS 0.48CR - 8.0NI - 4.0CO - 0.48MO - 0.09V (0.24 - 0.30C) ANNEALED

AMS6541

Pub. No. 24230


45


AMS6541 STEEL BARS, FORGINGS, TUBING, AND RINGS 0.48CR - 8.0NI - 4.0CO - 0.48MO - 0.9V (0.24 - 0.30C) PREMIUM QUALITY, CONSUMABLE ELECTRODE MELTED, ANNEALED

NO REPLACEMENT

AMS6542 STEEL BARS, FORGINGS, AND TUBING 0.27CR - 7.75NI - 4.0CO - 0.27MO - 0.09V (0.42 - 0.48C) PREMIUM QUALITY, CONSUMABLE ELECTRODE MELTED, ANNEALED

NO REPLACEMENT

AMS6545 STEEL SHEET STRIP, AND PLATE 0.48CR - 8.0NI - 4.0CO - 0.48MO - 0.9V (0.24 - 0.30C) ANNEALED

AMS6546

AMS6550 STEEL TUBING, WELDED 0.50CR - 0.55NI - 0.20MO (0.28 - 0.33C) (SAE 8630) - UNS G86300

NO REPLACEMENT

AMS7205 SPRING PINS, TUBULAR CARBON STEEL AS7205

AMS7207 SPRING PINS, TUBULAR CORROSION AND MODERATE HEAT RESISTANT STEEL - UNS 542000

AS7207

AMS7210 COTTER PINS, STEEL, CORROSION-RESISTANT 18CR-9.5NI AS7210

AMS7211 COTTER PINS, STEEL, CORROSION AND HEAT RESISTANT 18CR - 10.5NI - 0.40TI - UNS S32100

AS7211

AMS7220 ALUMINUM RIVETS 99AL (1100-H14) AS7220

AMS7222 RIVETS, ALUMINUM ALLOY 2.5CU - 0.35MG (2117-T4) AS7222

AMS7223 RIVETS, ALUMINUM ALLOY 4.5CU - 1.5MG - 0.6MN (2024 - T4) NO REPLACEMENT

AMS7225 RIVETS, CARBON STEEL - UNS G10100 AS7225

Pub. No. 24230


46


AMS7228 RIVETS, CORROSION RESISTANT STEEL 18CR - 9NI SOLUTION HEAT TREATED AS7228

AMS7229 RIVETS, CORROSION AND HEAT RESISTANT STEEL 18CR - 10.5NI - 0.70 (CB+TA) SOLUTION HEAT TREATED - UNS S34700

AS7229

AMS7232 RIVETS, CORROSION AND HEAT RESISTANT ALLOY 74NI - 15.5CR - 8.0FE - UNS N06600

AS7232

AMS7233 RIVETS, SOLID, CORROSION RESISTANT ALLOY 67NI - 31CU AS7233

AMS7234 RIVETS, BLIND, CORROSION RESISTANT ALLOY 67NI - 31CU - UNS N04405 AS7234

AMS7235 RIVETS, CORROSION AND HEAT RESISTANT STEEL 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V 1650 °F (900 °C) SOLUTION HEAT TREATED AND PARTIALLY PRECIPITATION HEAT TREATED - UNS S66286

AS7235

AMS7236 RIVETS, CORROSION AND HEAT RESISTANT ALLOY 52CO - 20CR - 10NI - 15W SOLUTION HEAT TREATED - UNS R30605

AS7236

AMS7237 RIVETS, CORROSION AND HEAT RESISTANT ALLOY 47.5NI - 22CR - 1.5CO - 9.0MO - 060W - 18.5FE SOLUTION HEAT TREATED - UNS N06002

AS7237

AMS7238 ALLOY PM SHAPES, CORROSION, WEAR, AND HEAT RESISTANT 66CO - 30CR - 8.25W (1.10 - 1.90C)

NO REPLACEMENT

AMS7240 WASHERS, SPRING LOCK CARBON STEEL AS7240

AMS7241 WASHERS, SPRING LOCK, CORROSION RESISTANT STEEL 18CR - 19NI - S30200 AS7241

AMS7246 INSERTS, THREAD FORM, CORROSION AND HEAT RESISTANT ALLOY 72NI - 15.5CR - 0.95(CB+TA) - 2.5TI - 0.70AL - 7.0FE - UNS N07750

AS7246

AMS7247 INSERTS, THREAD FORM, PHOSPHOR BRONZE 95CR - 4.6SN - 0.19P NO REPLACEMENT

Pub. No. 24230


47


AMS7250 NUTS, SELF-LOCKING, STEEL, CORROSION AND HEAT RESISTANT HIGH STRENGTH, ALL METAL 1200 °F (650 °C) USE, UNIFIED (MIL-S-7742) THREAD FORM

AS7250

AMS7251 NUTS, SELF-LOCKING, CORROSION AND HEAT RESISTANT STEEL HIGH STRENGTH, ALL METAL 1200 °F (650 °C) USE, UNIFIED "J" (MIL-S-8879) THREAD FORM

AS7251

AMS7253 NUTS, SELF-LOCKING, CORROSION AND HEAT RESISTANT ALLOY HIGH STRENGTH, ALL METAL 1400 °F (760 °C) USE, UNIFIED "J" (MIL-S-8879) THREAD FORM

AS7253

AMS7261 RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER HIGH- TEMPERATURE-FLUID RESISTANT

NO REPLACEMENT

AMS7263 RINGS, SEALING, BUTYL RUBBER, PHOSPHATE ESTER HYDRAUL FLUID RESISTANT 85 - 95

NO REPLACEMENT

AMS7265 RINGS, SEALING, ETHYLENE PROPYLENE (EPM) RUBBER PHOSPHATE ESTER HYDRAULIC FLUID RESISTANT 75 - 85

NO REPLACEMENT

AMS7275 RINGS, SEALING, SYNTHETIC RUBBER SYNTHETIC LUBRICANT RESISTANT (65 - 85) FLUOROCARBON TYPE

NO REPLACEMENT

AMS7277 RINGS, SEALING, SYNTHETIC RUBBER PHOSPHATE ESTER HYDRAULIC FLUID RESISTANT, BUTYL TYPE 70 - 85

NO REPLACEMENT

AMS7278 RINGS, SEALING, FLUOROCARBON RUBBER HIGH - TEMPERATURE-FLUID-RESISTANT 70 - 80

AMS7276

AMS7279 RINGS, SEALING, FLUOROCARBON RUBBER HIGH-TEMPERATURE-FLUID-RESISTANT 85 - 95

AMS7259

Pub. No. 24230


48


AMS7280 RINGS, SEALING, FLUOROCARBON RUBBER HIGH TEMPERATURE FLUID RESISTANT, LOW COMPRESSION SET FKM TYPE 70 - 80

AMS7276

AMS7281 GASKETS, TYPE XX ENGINE ACCESSORY DRIVE BRASS SCREEN REINFORCED NO REPLACEMENT

AMS7282 GASKETS, TYPE XX ENGINE ACCESSORY DRIVE CORROSION RESISTANT STEEL SCREEN REINFORCED

NO REPLACEMENT

AMS7283 GASKETS, TYPE XX ENGINE ACCESSORY DRIVE CORROSION RESISTANT STEEL SCREEN REINFORCED CONTROLLED PERFORMANCE

AS7283

AMS7292 LABELS, ALUMINUM FOIL ETCHED, ANODIZED, AND DYED NO REPLACEMENT

AMS7294 LABELS, ALUMINUM FOIL ETCHED AND ENAMELED NO REPLACEMENT

AMS7295 RADIOGRAPHIC FILM AND PAPER INDUSTRIAL GRADE NO REPLACEMENT

AMS7295/1 RADIOGRAPHIC FILM 5-80 NO REPLACEMENT



Pub. No. 24230


49






AMS7295/8 RADIOGRAPHIC PAPER 2.5-80 NO REPLACEMENT

AMS7295/9 RADIOGRAPHIC PAPER 2.0-80 NO REPLACEMENT

AMS7325 RINGS, SEALING, TUBULAR METAL, CORROSION AND HEAT RESISTANT STEEL AS7325

AMS7452 BOLTS AND SCREWS, LOW-ALLOY STEEL HEAT TREATED, ROLL THREADED - UNS G87400

AS7452

AMS7454 BOLTS AND SCREWS, LOW-ALLOY STEEL, HEAT RESISTANT NORMALIZED AND TEMPERED, ROLL THREADED 135,000 PSI (931 MPA) TENSILE STRENGTH - UKS K14675

AS7454

AMS7455 BOLTS AND SCREWS, LOW-ALLOY STEEL, HEAT-RESISTANT HARDENED AND TEMPERED, ROLL THREADED

AS7455

AMS7456 STUDS, LOW-ALLOY STEEL HEAT TREATED, ROLLED THREADED - UNS G87400 AS7456

Pub. No. 24230


50


AMS7458 STUDS, LOW-ALLOY HEAT-RESISTANT STEEL NORMALIZED AND TEMPERED, ROLL THREADED 135,000 PSI (931 MPA) TENSILE STRENGTH - UNS K14675

AS7458

AMS7459 BOLTS AND SCREWS, LOW-ALLOY, HEAT RESISTANT STEEL HARDENED AND TEMPERED, ROLL THREADED 195,000 PSI (1344 MPA) TENSILE STRENGTH - UNS K14675

AS7459

AMS7461 BOLTS AND SCREWS, TITANIUM ALLOY 6AL - 4V UPSET HEADED, HEAT TREATED, ROLL THREADED

AS7461

AMS7466 BOLTS AND SCREWS, CORROSION AND HEAT RESISTANT NICKEL ALLOY UPSET HEADED, ROLL THREADED, FATIGUE RESISTANT - UNS N07718

AS7466

AMS7467 BOLTS AND SCREWS, CORROSION AND HEAT RESISTANT NICKEL ALLOY UPSET HEADED, ROLL THREADED, STRESS-RUPTURE RESISTANT

AS7467

AMS7468 BOLTS AND SCREWS, CORROSION-RESISTANT WORK-STRENGTHENED ALLOY FORGED HEAD, ROLL THREADED AFTER AGING - UNS R30035

AS7468

AMS7469 BOLTS AND SCREWS, CORROSION HEAT RESISTANT NICKEL ALLOY UPSET HEADED, HEAT TREATED, ROLL THREADED 2050 °F (1121 °C) SOLUTION AND 1650 °F (899 °C) PRECIPITATION HEAT TREATED

AS7469

AMS7470 BOLTS AND SCREWS, CORROSION AND HEAT RESISTANT STEEL HEAT TREATED, ROLL THREADED - UNS S41800

AS7470

AMS7471 BOLTS AND SCREWS, CORROSION AND HEAT RESISTANT NICKEL ALLOY UPSET HEADED, HEAT TREATED, ROLL THREADED 1950 °F (1066 °C) SOLUTION HEAT TREATED - UNS N07001

AS7471

AMS7472 BOLTS AND SCREWS, CORROSION RESISTANT STEEL ROLL THREADED - UNS S30200

AS7472

AMS7473 BOLTS AND SCREWS, CARBON STEELS, ALLOY STEELS OR CORROSION AND HEAT RESISTANT STEELS OR ALLOYS ROLL THREADED

AS7473

AMS7474 BOLTS AND SCREWS, CORROSION RESISTANT STEEL UPSET HEADED, HEAT TREATED, ROLL THREADED - UNS S17400

AS7474

AMS7475 BOLTS AND SCREWS, WORK-STRENGTHENED CORROSION AND HEAT RESISTANT ALLOY FORGED HEAD, ROLL THREADED AFTER AGING - UNS R30159

AS7475

Pub. No. 24230


51


AMS7476 BOLTS AND SCREWS, STEEL, CORROSION AND HEAT RESISTANT ROLL THREADED - UNS K63198

NO REPLACEMENT

AMS7477 BOLTS AND SCREWS, CORROSION AND HEAT RESISTANT STEEL UPSET HEADED, HEAT TREATED, ROLL THREADED 1800 °F(982 °C) SOLUTION AND PRECIPITATION HEAT TREATED - UNS S66286

AS7477

AMS7478 BOLTS AND SCREWS, CORROSION AND HEAT RESISTANT STEEL HEAT TREATED, ROLL THREADED 1800 °F (982 °C) SOLUTION AND PRECIPITATION HEAT TREATED

AS7478

AMS7479 BOLTS AND SCREWS, CORROSION AND HEAT RESISTANT STEEL HEAT TREATED, ROLL THREADED 1650 °F (899 °C) SOLUTION AND PRECIPITATION HEAT TREATED - UNS S66286

AS7479

AMS7481 STUDS, CORROSION AND HEAT RESISTANT STEEL HEAT TREATED, ROLL THREADED - UNS S66286

AS7481

AMS7482 STUDS, CORROSION AND HEAT RESISTANT STEEL ROLL THREADED AFTER HEAT TREATMENT 1800°F (982°C) SOLUTION HEAT TREATMENT - UNS S66286

AS7482

AMS7701 NICKEL-IRON ALLOY, MAGNETIC, SHEET AND STRIP ANNEALED ASTM A753

AMS7702 NICKEL-IRON ALLOY, MAGNETIC, SHEET AND STRIP COLD ROLLED, HALF-HARD TEMPER

ASTM A753

AMS7705 NICKEL-IRON MAGNETIC ALLOY, BARS AND FORGINGS ASTM A753

AMS7706 IRON BAR, SHEET, STRIP, AND PLATE, COMMERCIALLY PURE - HOT ROLLED, ANNEALED

NO REPLACEMENT

AMS7711 STEEL SHEET AND STRIP, FLAT-ROLLED, ELECTRICAL, NON-ORIENTED 2.65 (SI + AL) TYPE 47S188 OR TYPE 64S213, SEMI-PROCESSED

NO REPLACEMENT

AMS7712 STEEL SHEET AND STRIP, FLAT-ROLLED, ELECTRICAL, NON-ORIENTED 3.0 (SI + AL) TYPE 47S178 OR TYPE 64S194, SEMI-PROCESSED

NO REPLACEMENT

Pub. No. 24230


52


AMS7714 STEEL SHEET AND STRIP, FLAT-ROLLED ELECTRICAL 3SI AISI TYPE M-19, SEMIPROCESSED

NO REPLACEMENT

AMS7715 STEEL SHEET AND STRIP, FLAT-ROLLED ELECTRICAL 4.25SI, AISI TYPE M-15, SEMIPROCESSED

NO REPLACEMENT

AMS7720 LEAD ALLOY CASTINGS, 6.5SB - 0.5SN NO REPLACEMENT

AMS7730 DEPLETED URANIUM CASTINGS NO REPLACEMENT

AMS7734 NICKEL-IRON ALLOY WIRE, COPPER CLAD, ROUND 42NI - 56.5FE ANNEALED DUMET

NO REPLACEMENT

AMS7800 MOLYBDENUM SHEET, STRIP, PLATE, POWDER METALLURGY, SINTERED, STRESS RELIEVED

NO REPLACEMENT

AMS7801 MOLYBDENUM SHEET, STRIP AND PLATE ARC CAST, STRESS RELIEVED - UNS R03605

NO REPLACEMENT

AMS7805 MOLYBDENUM BARS ARC CAST, STRESS RELIEVED - UNS R03606 NO REPLACEMENT

AMS7806 MOLYBDENUM FORGINGS POWDER METALLURGY, SINTERED, STRESS RELIEVED

NO REPLACEMENT

AMS7807 MOLYBDENUM FORGINGS, ARC CAST, STRESS RELIEVED NO REPLACEMENT

Pub. No. 24230


53


AMS7811 MOLYBDENUM ALLOY SHEET, STRIP, PLATE, 0.5TI, ARC CAST, STRESS RELIEVED

NO REPLACEMENT

AMS7813 MOLYBDENUM ALLOY BARS, 0.5TI, ARC CAST, STRESS RELIEVED NO REPLACEMENT

AMS7817 MOLYBDENUM ALLOY SHEET, STRIP, AND PLATE 0.48TI - 0.09ZR - 0.02C ARC CAST, STRESS RELIEVED

NO REPLACEMENT

AMS7821 MOLYBDENUM ALLOY FORGINGS, 0.5TI-0.08ZR, ARC CAST, STRESS RELIEVED NO REPLACEMENT

AMS7846 TANTALUM ALLOY BARS AND RODS 90TA - 10W ANNEALED - UNS R05255 AMS7848

AMS7880 TUNGSTEN CARBIDE-COBALT POWDER SINTERED AND CRUSHED NO REPLACEMENT

AMS7899 TUNGSTEN SHEET & STRIP NO REPLACEMENT

AMS7900 VIRGIN BERYLLIUM BARS, RODS, AND SHAPES - UNS R19920 NO REPLACEMENT

AMS7903 BERYLLIUM BARS, RODS, TUBING, AND SHAPES 4.25BEO - 94BE HIGH MICRO-YIELD STRENGTH

NO REPLACEMENT

AMS7905 BERYLLIUM BARS, RODS, TUBING, AND SHAPES OPTICAL GRADE NO REPLACEMENT

Pub. No. 24230


54


AMS-C-5541 CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS - AREA MFFP

MIL-DTL-5541

AMS-H-6088 HEAT TREATMENT OF ALUMINUM ALLOYS AMS2772, AMS2770, AMS2771

AMS-I-7068 INGOT, ZINC ALLOY (FOR SHEET METAL FORMING DIES) ASTM B793

AMS-M-6857 MAGNESIUM ALLOY CASTINGS, HEAT TREATMENT OF AMS2768

AMS-P-5516 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, 160°F NO REPLACEMENT

AMS-QQ-A-200/1 ALUMINUM ALLOY 3003, BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED - UNS A93003

ASTM B221, ASTM B241/B241M



AMS-QQ-A-200/16 ALUMINUM ALLOY, STRUCTURAL SHAPES, EXTRUDED, 6061 - UNS A96061 ASTM B221



AMS-QQ-A-200/8 ALUMINUM ALLOY 6061, BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED A96061

AMS4150, AMS4160, AMS4161, AMS4172, AMS4173

Pub. No. 24230


55




AMS-QQ-A-225/1 ALUMINUM ALLOY, BAR, ROD, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED, 1100 - UNS A91100

ASTM B211/B211M


ASTM B211/B211M


ASTM B211/B211M


ASTM B211/B211M


ASTM B211/B211M

AMS-QQ-A-225/8 ALUMINUM ALLOY 6061, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED - A96061

AMS4116, AMS4117, AMS4128, AMS4115

AMS-QQ-A-250/1 ALUMINUM 1100, PLATE AND SHEET - UNS A91100 ASTM B209

Pub. No. 24230


56


AMS-QQ-A-250/11 ALUMINUM ALLOY 6061, PLATE AND SHEET - UNS A96061 AMS4025, AMS4027, AMS4026

AMS-QQ-A-250/13 ALUMINUM ALLOY ALCLAD 7075, PLATE AND SHEET - UNS A87075 AMS4048, AMS4049

AMS-QQ-A-250/19 ALUMINUM ALLOY 5086, PLATE AND SHEET FOR SEA WATER APPLICATIONS ASTM B209/B209M, ASTM B928/B928M

AMS-QQ-A-250/2 ALUMINUM ALLOY 3003, PLATE AND SHEET - UNS A93003 ASTM B209/B209M

AMS-QQ-A-250/20 ALUMINUM ALLOY 5456, PLATE AND SHEET, FOR SEA WATER APPLICATIONS ASTM B209/B209M, ASTM B928/B928M

AMS-QQ-A-250/24 ALUMINUM ALLOY, 7075, PLATE AND SHEET (IMPROVED EXFOLIATION RESISTANT) - UNS A97075

AMS4315

Pub. No. 24230


57


AMS-QQ-A-250/25 ALUMINUM ALLOY, ALCLAD 7075 PLATE AND SHEET IMPROVED EXFOLIATION RESISTANT - UNS A97075

AMS4316

AMS-QQ-A-250/26 ALUMINUM 7075, PLATE AND SHEET ALCLAD 7011 - UNS A97075 ASTM B209

AMS-QQ-A-250/6 ALUMINUM ALLOY 5083, PLATE AND SHEET - UNS A95083 AMS4056

AMS-QQ-A-250/7 ALUMINUM ALLOY 5086, PLATE AND SHEET - UNS A95086 ASTM B209/B209M

AMS-QQ-A-250/9 ALUMINUM ALLOY 5456, PLATE AND SHEET - UNS A95456 ASTM B209/B209M, ASTM B928/B928M

AMS-QQ-C-320 CHROMIUM PLATING (ELECTRODEPOSITED) AMS2460

AMS-QQ-P-35 PASSIVATION TREATMENTS FOR CORROSION-RESISTANT STEEL AMS2700

AMS-QQ-S-700 STEEL, SHEET AND STRIP, MEDIUM AND HIGH CARBON ASTM A684/A684M

AMS-R-3065 RUBBER, FABRICATED PRODUCTS NO REPLACEMENT, ASTM D2000

Pub. No. 24230


58


AMS-R-6130 RUBBER, CELLULAR, CHEMICALLY BLOWN ASTM D6576

AMS-R-6855 ELASTOMER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES, GENERAL SPECIFICATION FOR

MIL-PRF-6855

AMS-S-5000 STEEL, CHROME-NICKEL-MOLYBDENUM (E4340) BARS AND REFORGING STOCK AMS6484, AMS6415

AMS-S-5626 STEEL: CHROME-MOLYBDENUM (4140) BARS, RODS, AND FORGING STOCK (FOR AIRCRAFT APPLICATIONS)

AMS6382, AMS6349

AMS-S-6049 STEEL, CHROME-NICKEL-MOLYBDENUM (8740) BARS AND REFORGING STOCK (AIRCRAFT QUALITY)

AMS6327, AMS6325, AMS6322


MIL-S-6050

Pub. No. 24230


59


AMS-S-6090 STEEL CARBURIZING AND NITRIDING, PROCESSES FOR AMS2759/8, AMS2759/7, AMS2759/6


AMS6320

AMS-S-6709 STEEL, CHROME-MOLYBDENUM-ALUMINUM; BARS, RODS, BILLETS AND FORGING STOCK (FOR NITRIDING) (AIRCRAFT QUALITY)

AMS6472, AMS6470

AMS-S-7108 STEEL, ALLOY (MANGANESE-SILICON-NICKEL), BARS AND FORGING STOCK (AIRCRAFT QUALITY)

MIL-S-7108

AMS-S-7420 STEEL BARS, ALLOY, CHROMIUM, HIGH CARBON E52100 (AIRCRAFT QUALITY) AMS6444, AMS6447, AMS6479, AMS6440

AMS-S-7916 SEALING COMPOUND, THREAD AND GASKET, FUEL, OIL, AND WATER RESISTANT

NO REPLACEMENT

AMS-S-7947 STEEL, SHEET AND STRIP (1095) (AIRCRAFT QUALITY) ASTM A684/A684M

AMS-S-7952 STEEL, SHEET AND STRIP, UNCOATED, CARBON (1020 AND 1025) (AIRCRAFT QUALITY)

AMS5046

Pub. No. 24230


60


AMS-STD-2175 CASTINGS, CLASSIFICATION AND INSPECTION OF - AREA NDTI AMS2175

AMS-STD-2219 FUSION WELDING FOR AEROSPACE APPLICATIONS AWS D17.1/D17.1M

AMS-T-6735 TUBING, CHROME-MOLYBDENUM, 4135 STEEL, SEAMLESS AIRCRAFT QUALITY AMS6365

AMS-T-6736 TUBING, CHROME-MOLYBDENUM (4130 OR 8630) STEEL, SEAMLESS AND WELDED

AMS6361, AMS6362, AMS6360

AMS-T-7081 TUBE, ALUMINUM ALLOY, SEAMLESS, ROUND, DRAWN, 6061, AIRCRAFT HYDRAULIC QUALITY

AMS4081, AMS4083

AMS-W-6858 WELDING, RESISTANCE: SPOT AND SEAM AWS D17.2/D17.2M

AN-QQ-A-696 ANODIC-FILMS; CORROSION-PROTECTIVE (FOR) ALUMINUM ALLOYS MIL-A-8625

AN-QQ-S-685 STEEL; CHROME-MOLYBDENUM (X 4130), PLATE, SHEET, AND STRIP MIL-S-18729

Pub. No. 24230


61


AN-QQ-S-770 STEEL; CORROSION-RESISTING (16CR-2NI) BAR AND ROD MIL-S-18732

AN-QQ-S-772 STEEL; CORROSING-RESISTING (18 CR - 8 NI), PLATE, SHEET, AND STRIP MIL-S-5059

ASTM A309 STANDARD TEST METHOD FOR WEIGHT AND COMPOSITION OF COATING ON TERNE SHEET BY THE TRIPLE-SPOT TEST

NO REPLACEMENT

ASTM A331 STANDARD SPECIFICATION FOR STEEL BARS, ALLOY, COLD-FINISHED ASTM A108

ASTM A361/A361M STANDARD SPECIFICATION FOR STEEL SHEET, ZINC-COATED (GALVANIZED) BY THE HOT-DIP PROCESS FOR ROOFING AND SIDING

NO REPLACEMENT

ASTM A444/A444M STANDARD SPECIFICATION FOR STEEL SHEET, ZINC-COATED (GALVANIZED) BY THE HOT-DIP PROCESS FOR STORM SEWER AND DRAINAGE PIPE

ASTM A929/A929M

ASTM A48M STANDARD SPECIFICATION FOR GRAY IRON CASTINGS (METRIC) ASTM A48/A48M

ASTM A526/A526M STANDARD SPECIFICATION FOR STEEL SHEET, ZINC-COATED (GALVANIZED) BY THE HOT-DIP PROCESS, COMMERCIAL QUALITY

ASTM A653/A653M

ASTM A527/A527M STANDARD SPECIFICATION FOR STEEL SHEET, ZINC-COATED (GALVANIZED) BY THE HOT-DIP PROCESS, LOCK-FORMING QUALITY

ASTM A653/A653M

ASTM A528/A528M STANDARD SPECIFICATION FOR STEEL SHEET, ZINC- COATED (GALVANIZED) BY THE HOT-DIP PROCESS, DRAWING QUALITY

ASTM A653/A653M

Pub. No. 24230


62


ASTM A545 STANDARD SPECIFICATION FOR STEEL WIRE, CARBON, COLD-HEADING QUALITY, FOR MACHINE SCREWS

NO REPLACEMENT

ASTM A546 STANDARD SPECIFICATION FOR STEEL WIRE, MEDIUM-HIGH-CARBON, COLD-HEADING QUALITY, FOR HEXAGON-HEAD BOLTS

NO REPLACEMENT

ASTM A547 STANDARD SPECIFICATION FOR STEEL WIRE, ALLOY, COLD-HEADING QUALITY, FOR HEXAGON-HEAD BOLTS

NO REPLACEMENT

ASTM A548 STANDARD SPECIFICATION FOR STEEL WIRE, CARBON, COLD-HEADING QUALITY, FOR TAPPING OR SHEET METAL SCREWS

NO REPLACEMENT

ASTM A549 STANDARD SPECIFICATION FOR STEEL WIRE, CARBON, COLD-HEADING QUALITY, FOR WOOD SCREWS

NO REPLACEMENT

ASTM A616/A616M STANDARD SPECIFICATION FOR RAIL-STEEL DEFORMED AND PLAIN BARS FOR CONCRETE REINFORCEMENT

ASTM A996/A996M

ASTM A617/A617M STANDARD SPECIFICATION FOR AXLE-STEEL DEFORMED AND PLAIN BARS FOR CONCRETE REINFORCEMENT

ASTM A996/A996M

ASTM A642/A642M STANDARD SPECIFICATION FOR STEEL SHEET, ZINC-COATED (GALVANIZED) BY THE HOT-DIP PROCESS, DRAWING QUALITY, SPECIAL KILLED

ASTM A653/A653M

ASTM A682/A682M STANDARD SPECIFICATION FOR STEEL, STRIP, HIGH-CARBON, COLD-ROLLED, GENERAL REQUIREMENTS FOR

ASTM A684/A684M

ASTM A82/A82M STANDARD SPECIFICATION FOR STEEL WIRE, PLAIN, FOR CONCRETE REINFORCEMENT

ASTM A1064/A1064M

Pub. No. 24230


63


ASTM B133 STANDARD SPECIFICATION FOR COPPER ROD, BAR, AND SHAPES ASTM B187/B187M

ASTM B138M STANDARD SPECIFICATION FOR MANGANESE BRONZE ROD, BAR AND SHAPES (METRIC)

ASTM B138/B138M

ASTM B139M STANDARD SPECIFICATION FOR PHOSPHOR BRONZE ROD, BAR, AND SHAPES (METRIC)

ASTM B139/B139M

ASTM B151M STANDARD SPECIFICATION FOR COPPER-NICKEL-ZINC ALLOY (NICKEL SILVER) AND COPPER-NICKEL ROD AND BAR (METRIC)

ASTM B151/B151M

ASTM B152M STANDARD SPECIFICATION FOR COPPER SHEET, STRIP, PLATE, AND ROLLED BAR (METRIC)

ASTM B152/B152M

ASTM B159M STANDARD SPECIFICATION FOR PHOSPHOR BRONZE WIRE ASTM B159/B159M

ASTM B169M STANDARD SPECIFICATION FOR ALUMINUM BRONZE SHEET, STRIP, AND ROLLED BAR (METRIC)

ASTM B169/B169M

ASTM B16M STANDARD SPECIFICATION FOR FREE-CUTTING BRASS ROD, BAR, AND SHAPES FOR USE IN SCREW MACHINES (METRIC)

ASTM B16/B16M

ASTM B187M STANDARD SPECIFICATION FOR COPPER BAR, BUS BAR, ROD AND SHAPES (METRIC)

ASTM B187/B187M

ASTM B196M STANDARD SPECIFICATION FOR COPPER-BERYLLIUM ALLOY ROD AND BAR (METRIC)

ASTM B196/B196M

Pub. No. 24230


64


ASTM B442 STANDARD SPECIFICATION FOR TOUGH-PITCH CHEMICALLY REFINED COPPER-REFINERY SHAPES

NO REPLACEMENT

ASTM B484 STANDARD SPECIFICATION FOR SINTERED NICKEL STEEL STRUCTURAL PARTS

ASTM B783

ASTM B99M STANDARD SPECIFICATION FOR COPPER-SILICON ALLOY WIRE FOR GENERAL APPLICATIONS (METRIC)

ASTM B99/B99M

ASTM D693 STANDARD SPECIFICATION FOR CRUSHED AGGREGATE FOR MACADAM PAVEMENTS

NO REPLACEMENT

ASTM E172 STANDARD PRACTICE FOR DESCRIBING AND SPECIFYING THE EXCITATION SOURCE IN EMISSION SPECTROCHEMICAL ANALYSIS

NO REPLACEMENT

ASTM E427 STANDARD PRACTICE FOR TESTING FOR LEAKS USING THE HALOGEN LEAK DETECTOR (ALKALI-ION DIODE)

NO REPLACEMENT

AWPA P18 NONPRESSURE PRESERVATIVES NO REPLACEMENT

AWPA P19 STANDARD FOR OLIGOMERIC ALKYLPHENOL POLYSULFIDE (PXTS) PRESERVATIVE

NO REPLACEMENT

AWPA P30 STANDARD FOR COPPER BIS(DIMETHYLDITHIOCARBAMATE) (CDDC) NO REPLACEMENT

AWPA P31 STANDARD FOR COPPER AZOLE TYPE A (CBA-A) NO REPLACEMENT

Pub. No. 24230


65


AWPA P4 STANDARD FOR PETROLEUM OIL FOR BLENDING WITH CREOSOTE NO REPLACEMENT

AWPA P5 STANDARD FOR WATERBORNE PRESERVATIVES NO REPLACEMENT

AWPA P8 STANDARD FOR OIL-BORNE PRESERVATIVES NO REPLACEMENT

AWS A5.20/A5.20M

SPECIFICATION FOR CARBON STEEL ELECTRODES FOR FLUX CORED ARC WELDING

AWS A5.36/A5.36M

AWS A5.27 SPECIFICATION FOR COPPER AND COPPER ALLOY RODS FOR OXYFUEL GAS WELDING

AWS A5.7/A5.7M

AWS A6.0 SAFE PRACTICES FOR WELDING AND CUTTING CONTAINERS THAT HAVE HELD COMBUSTIBLES

AWS F4.1

AWS API-IM CODE CLINIC FOR STUDY OF API STANDARD 1104 EIGHTEENTH EDITION WELDING OF PIPELINES AND RELATED FACILITIES - INSTRUCTION MANUAL

AWS API-M

AWS B3.0 WELDING PROCEDURE AND PERFORMANCE QUALIFICATION - REPRINT MAY, 1973

AWS B2.1/B2.1M

AWS C7.2 RECOMMENDED PRACTICES FOR LASER BEAM WELDING, CUTTING, AND DRILLING

AWS C7.2M

AWS D1.0 WELDING IN BUILDING CONSTRUCTION - NINTH EDITION AWS D1.1/D1.1M

AWS D10.11 RECOMMENDED PRACTICES FOR ROOT PASS WELDING OF PIPE WITHOUT BACKING

AWS D10.11M/D10.11

AWS D12.1 REINFORCING STEEL WELDING CODE - BEST COPY AVAILABLE AWS D1.4/D1.4M

AWS D2.0 WELDED HIGHWAY AND RAILWAY BRIDGES AWS D1.1/D1.1M

Pub. No. 24230


66


AWS D8.9 RECOMMENDED PRACTICES FOR TEST METHODS FOR EVALUATING THE RESISTANCE SPOT WELDING BEHAVIOR OF AUTOMOTIVE SHEET STEEL MATERIALS - SAE D8.9

AWS D8.9M

AWS F1.3 SAMPLING STRATEGY GUIDE FOR EVALUATING CONTAMINANTS IN THE WELDING ENVIRONMENT

AWS F1.3M

AWS F1.5M METHODS FOR SAMPLING AND ANALYZING GASES FROM WELDING AND ALLIED PROCESSES

AWS F1.1M

FED-STD-151 METALS; TEST METHODS

ASTM E427, ASTM E1282, ASTM B117, ASTM E515, ASTM A309, ASTM G69, ASTM E172, ASTM A630, ASTM G47, ASTM E376

J453 CHEMICAL COMPOSITIONS AND MECHANICAL AND PHYSICAL J452

MIL-C-5541 CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS MIL-DTL-5541

MIL-R-3065 RUBBER, FABRICATED PRODUCTS NO REPLACEMENT, ASTM D2000, AMS-R-3065

MIL-S-18729 STEEL PLATE, SHEET, AND STRIP, ALLOY 4130 AIRCRAFT QUALITY AMS6350, AMS6345, AMS6351

Pub. No. 24230


67


MIL-S-5059 STEEL, CORROSION RESISTANT (18-8) PLATE, SHEET AND STRIP

AMS5902, AMS5905, AMS5513, AMS5517, AMS5904, AMS5519, AMS5911, AMS5912, AMS5906, AMS5913

MIL-S-7108 STEEL, ALLOY (MANGANESE-SILICON-NICKEL), BARS AND FORGING STOCK (AIRCRAFT QUALITY)

AMS6425

QQ-A-00250/19 ALUMINUM ALLOY 5086, PLATE AND SHEET FOR SEA WATER APPLICATION ASTM B209

QQ-A-00250/20 ALUMINUM ALLOY 5456, PLATE AND SHEET, FOR SEA WATER APPLICATION ASTM B209

QQ-A-200/1 ALUMINUM ALLOY 3003, BAR, ROD, SHAPES, TUBE AND WIRE, EXTRUDED AMS-QQ-A-200/1

Pub. No. 24230


68




QQ-A-200/12 ALUMINUM ALLOY BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED, 7079 AMS-QQ-A-200/1


QQ-A-200/14 ALUMINUM ALLOY BAR, ROD, SHAPES, AND WIRE, EXTRUDED, 7178-T76 (IMPROVED EXFOLIATION RESISTANT)

AMS-QQ-A-200/14

QQ-A-200/15 ALUMINUM ALLOY BAR, ROD AND SHAPES, EXTRUDED, 7075-T76 (IMPROVED EXFOLIATION RESISTANT)

AMS-QQ-A-200/15

QQ-A-200/16 ALUMINUM ALLOY STRUCTURAL SHAPES, EXTRUDED, 6061 AMS-QQ-A-200/16

Pub. No. 24230


69





QQ-A-200/4 ALUMINUM ALLOY 5083, BAR, ROD, SHAPES, STRUCTURAL SHAPES, TUBE AND WIRE, EXTRUDED

AMS-QQ-A-200/4




Pub. No. 24230


70




QQ-A-225/1 ALUMINUM ALLOY BAR, ROD, AND WIRE; ROLLED, DRAWN OR COLD FINISHED, 1100

AMS-QQ-A-225/1

QQ-A-225/10 ALUMINUM ALLOY 6262 BAR, ROD AND WIRE; ROLLED, DRAWN OR COLD FINISHED

AMS-QQ-A-225/10

QQ-A-225/2 ALUMINUM ALLOY BAR, ROD, AND WIRE; ROLLED, DRAWN OR COLD FINISHED, 3003

AMS-QQ-A-225/2

QQ-A-225/3 ALUMINUM ALLOY BAR, ROD, AND WIRE; ROLLED, DRAWN, OR COLD FINISHED, 2011

AMS-QQ-A-225/3

Pub. No. 24230


71


QQ-A-225/4 ALUMINUM ALLOY BAR, ROD, WIRE, AND SPECIAL SHAPES, ROLLED, DRAWN, OR COLD FINISHED, 2014

AMS-QQ-A-225/4

QQ-A-225/5 ALUMINUM ALLOY 2017, BAR, ROD AND WIRE; ROLLED DRAWN OR COLD FINISHED

AMS-QQ-A-225/5

QQ-A-225/6 ALUMINUM ALLOY BAR, ROD, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED, 2024

AMS-QQ-A-225/6

QQ-A-225/7 ALUMINUM ALLOY 5052 BAR, ROD AND WIRE; ROLLED, DRAWN OR COLD FINISHED

AMS-QQ-A-225/7

QQ-A-225/8 ALUMINUM ALLOY 6061 BAR, ROD, WIRE AND SPECIAL SHAPES; ROLLED, DRAWN OR COLD FINISHED

AMS-QQ-A-225/8

QQ-A-225/9 ALUMINUM ALLOY 7075 BAR, ROD, WIRE AND SPECIAL SHAPES; ROLLED, DRAWN OR COLD FINISHED

AMS-QQ-A-225/9

QQ-A-245 ALUMINUM AND ALUMINUM ALLOY WROUGHT PRODUCTS, TOLERANCES FOR FED-STD-245

Pub. No. 24230


72


QQ-A-250/1 ALUMINUM 1100, PLATE AND SHEET AMS-QQ-A-250/1

QQ-A-250/10 ALUMINUM ALLOY 5454, PLATE AND SHEET AMS-QQ-A-250/10



QQ-A-250/13 ALUMINUM ALLOY ALCLAD 7075, PLATE AND SHEET AMS-QQ-A-250/13

Pub. No. 24230


73






QQ-A-250/18 ALUMINUM ALLOY ALCLAD ONE SIDE 7075, PLATE AND SHEET AMS-QQ-A-250/18

Pub. No. 24230


74



QQ-A-250/21 ALUMINUM ALLOY, 7178-T76, PLATE AND SHEET (IMPROVED EXFOLIATION RESISTANT)

AMS-QQ-A-250/21

QQ-A-250/22 ALUMINUM ALLOY, 7178-T76, PLATE AND SHEET ALCLAD (IMPROVED EXFOLIATION RESISTANT)

AMS-QQ-A-250/22

QQ-A-250/23 ALUMINUM ALLOY ALCLAD ONE SIDE 7079, SHEET AMS-QQ-A-250/23

QQ-A-250/24 ALUMINUM ALLOY, 7075, PLATE AND SHEET (IMPROVED EXFOLIATION RESISTANT)

AMS-QQ-A-250/24

Pub. No. 24230


75


QQ-A-250/25 ALUMINUM ALLOY ALCLAD 7075, PLATE AND SHEET (IMPROVED EXFOLIATION RESISTANT)

AMS-QQ-A-250/25

QQ-A-250/26 ALUMINUM ALLOY, 7011 ALCLAD 7075, PLATE AND SHEET AMS-QQ-A-250/26

QQ-A-250/27 ALUMINUM ALLOY, 7011 OR 7008 ALCLAD 7079, PLATE AND SHEET AMS-QQ-A-250/27

QQ-A-250/28 ALUMINUM ALLOY, 7011 ALCLAD 7178, PLATE AND SHEET AMS-QQ-A-250/28

QQ-A-250/29 ALUMINUM ALLOY, 2124, PLATE AMS-QQ-A-250/29

Pub. No. 24230


76



QQ-A-250/30 ALUMINUM ALLOY, 2219, PLATE AND SHEET AMS-QQ-A-250/30


QQ-A-250/5 ALUMINUM ALLOY ALCAD 2024, PLATE AND SHEET AMS-QQ-A-250/5


Pub. No. 24230


77





QQ-A-255 ALUMINUM ALLOY PLATES AND SHEETS ALCLAD 2014 (R301,CLAD 14S) QQ-A-250/3

QQ-A-261 ALUMINUM ALLOY BARS, RODS, AND SHAPES, EXTRUDED, 2014 QQ-A-200/2

QQ-A-266 ALUMINUM ALLOY BARS, RODS, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED, 2014

QQ-A-225/4

QQ-A-267 ALUMINUM ALLOY BARS, RODS, AND SHAPES, EXTRUDED, 2024 QQ-A-200/3

QQ-A-268 ALUMINUM ALLOY BARS, RODS, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED, 2024

QQ-A-225/6

QQ-A-270 ALUMINUM ALLOY; BARS, RODS AND SHAPES; EXTRUDED; 6061 AND 6062 QQ-A-200/8

Pub. No. 24230


78


QQ-A-277 ALUMINUM ALLOY BARS, RODS, AND SHAPES, EXTRUDED 7075 QQ-A-200/11


QQ-A-225/9

QQ-A-283 ALUMINUM ALLOY, PLATE, AND SHEET 7075 QQ-A-250/12

QQ-A-287 ALUMINUM ALLOY PLATE AND SHEET; ALCLAD 7075 QQ-A-250/13

QQ-A-315 ALUMINUM ALLOY BARS, RODS, AND WIRE; ROLLED, DRAWN, OR COLD FINISHED, 5052

QQ-A-225/7

QQ-A-318 ALUMINUM ALLOY PLATE AND SHEET 5052 QQ-A-250/8


QQ-A-225/8


QQ-A-351 ALUMINUM ALLOY BAR, ROD, AND WIRE, ROLLED DRAWN, OR COLD FINISHED, 2017

QQ-A-225/5

QQ-A-353 ALUMINUM-ALLOY (AL-17), (ALUMINUM-COPPER-MAGNESIUM-MANGANESE); PLATES, SHEETS, AND STRIPS

NO REPLACEMENT

QQ-A-354 ALUMINUM-ALLOY (AL-24) (ALUMINUM-COPPER-MAGNESIUM (1.50%) -MANGANESE): BARS, RODS, SHAPES, AND WIRE

QQ-A-225/6

Pub. No. 24230


79


QQ-A-355 ALUMINUM ALLOY, PLATE AND SHEET 2024 QQ-A-250/4

QQ-A-356 ALUMINUM ALLOY BARS, RODS, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED, 3003

QQ-A-225/2

QQ-A-357 ALUMINUM ALLOY BARS, RODS, AND SHAPES, EXTRUDED 3003 QQ-A-200/1


QQ-A-362 ALUMINUM ALLOY PLATE AND SHEET, ALCLAD 2024 QQ-A-250/5

QQ-A-365 ALUMINUM-ALLOY BAR, ROD, AND WIRE (FREE-MACHINING), 2011 QQ-A-225/3

QQ-A-367 ALUMINUM ALLOY FORGINGS AMS-QQ-A-367

QQ-A-371 ALUMINUM ALLOY INGOT (FOR REMELTING) ASTM B179

QQ-A-411 ALUMINUM ALLOY BARS, RODS, AND WIRE; ROLLED, DRAWN, OR COLD FINISHED, 1100

QQ-A-225/1

QQ-A-561 ALUMINUM ALLOY PLATE AND SHEET, 1100 QQ-A-250/1

Pub. No. 24230


80


QQ-A-591 ALUMINUM ALLOY DIE CASTINGS AMS4291, AMS4290

QQ-A-596 ALUMINUM ALLOY PERMANENT AND SEMIPERMANENT MOLD CASTINGS ASTM B108/B108M

QQ-A-601 ALUMINUM ALLOY SAND CASTINGS ASTM B26/B26M

QQ-A-620 ALUMINUM BRONZE, PLATE, BAR, SHEET, AND STRIP QQ-C-450

QQ-A-630 ALUMINUM BRONZE BARS, RODS, SHAPES, DRAWN STRIP, AND FORGINGS QQ-B-679

QQ-A-671 ANODE, CADMIUM A-A-51126

QQ-A-673 ANODES, COPPER A-A-51144

QQ-A-677 ANODES, NICKEL A-A-51142

QQ-B-1005 BRONZE CASTINGS, LEADED TIN AND HIGH LEADED TIN QQ-C-390

QQ-B-101 BASE, METAL, (FOR) PLASTER AND STUCCO CONSTRUCTION QQ-L-101

QQ-B-575 BRAID, WIRE (COPPER, TIN-COATED OR SILVER-COATED, TUBULAR OR FLAT) A-A-59569

Pub. No. 24230


81


QQ-B-591 BRASS, ANODES QQ-A-660

QQ-B-611 BRASS, COMMERCIAL: BARS, PLATES, RODS SHAPES, SHEETS AND STRIPS QQ-B-613, QQ-B-626

QQ-B-613 BRASS, LEADED AND NONLEADED: FLAT PRODUCTS (PLATE, BAR, SHEET, AND STRIP)

ASTM B36/B36M, ASTM B121/B121M

QQ-B-621 BRASS, CASTINGS, LEADED YELLOW QQ-C-390

QQ-B-626 BRASS, LEADED AND NONLEADED: ROD, SHAPES, FORGINGS, AND FLAT PRODUCTS WITH FINISHED EDGES (BAR AND STRIP)

ASTM B36/B36M, ASTM B124/B124M, ASTM B121/B121M, ASTM B16/B16M

QQ-B-636 BRASS, NAVAL, LEADED AND NON-LEADED; RODS, BARS, SHAPES, AND FORGINGS

QQ-N-35

QQ-B-637 BRASS, NAVAL: ROD, WIRE, SHAPES, FORGINGS, AND FLAT PRODUCTS WITH FINISHED EDGES (BARS, FLAT WIRE, AND STRIP)

ASTM B21/B21M, ASTM B283/B283M, ASTM B124/B124M

QQ-B-650 BRAZING ALLOYS, COPPER, COPPER-ZINC, AND COPPER-PHOSPHORUS AWS A5.01M/A5.01, AWS A5.8M/A5.8

QQ-B-655 BRAZING ALLOYS, ALUMINUM AND MAGNESIUM, FILLER METAL AWS A5.8M/A5.8

Pub. No. 24230


82


QQ-B-663 BRONZE, ALUMINUM, ROD, BAR, SHAPE AND FORGING QQ-A-630

QQ-B-666 BRONZE, ALUMINUM; BARS, PLATES, RODS, SHAPES, SHEETS, AND STRIPS QQ-B-663, QQ-B-667

QQ-B-667 BRONZE, ALUMINUM; PLATE, ROLLED BAR, SHEET, AND STRIP QQ-A-620

QQ-B-671 BRONZE, ALUMINUM, CASTINGS QQ-C-390

QQ-B-675 BRONZE, ALUMINUM; INGOTS ASTM B30

QQ-B-679 BRONZE, ALUMINUM, ROD, FLAT PRODUCTS WITH FINISHED EDGES (FLAT WIRE, STRIP, AND BAR), SHAPES, AND FORGINGS

QQ-C-465

QQ-B-691 BRONZE; CASTINGS QQ-L-225

QQ-B-701 BRONZE; INGOTS QQ-C-525

QQ-B-71 BAR, REINFORCEMENT, (FOR) CONCRETE QQ-S-632

QQ-B-721 BRONZE, MANGANESE; BARS, FORGINGS, PLATES, RODS, AND SHAPES QQ-M-80

QQ-B-726 BRONZE CASTINGS, MANGANESE AND ALUMINUM-MANGANESE QQ-C-390

QQ-B-728 BRONZE MANGANESE; ROD, SHAPES, FORGINGS, AND FLAT PRODUCTS (FLAT WIRE, STRIP, SHEET, BAR, AND PLATE)

ASTM B138/B138M

QQ-B-731 BRONZE, MANGANESE, AND MANGANESE-ALUMINUM; INGOTS (FOR REMELTING)

QQ-C-523

Pub. No. 24230


83


QQ-B-746 BRONZE, PHOSPHOR; BARS, PLATES, RODS, SHAPES, SHEETS AND STRIPS QQ-P-330

QQ-B-750 BRONZE, PHOSPHOR; BAR, PLATE, ROD, SHEET, STRIP, FLAT WIRE, AND STRUCTURAL AND SPECIAL SHAPED SECTIONS

ASTM B139/B139M

QQ-C-00400 COPPER-BASE ALLOY CENTRIFUGAL CASTINGS QQ-C-390

QQ-C-320 CHROMIUM PLATING (ELECTRODEPOSITED) AMS-QQ-C-320

Pub. No. 24230


84


QQ-C-390 COPPER ALLOY CASTINGS (INCLUDING CAST BAR)

ASTM B763/B763M, AMS4842, AMS4855, ASTM B62, ASTM B770, ASTM B22/B22M, ASTM B584, ASTM B369, AMS4890, ASTM B271/B271M

QQ-C-465 COPPER-ALUMINUM ALLOYS (ALUMINUM BRONZE) (COPPER ALLOY NUMBERS 606, 614, 630, AND 642); ROD, FLAT PRODUCTS WITH FINISHED EDGES (FLAT WIRE, STRIP, AND BAR), SHAPES, AND FORGINGS

ASTM B283/B283M, ASTM B124/B124M, ASTM B150/B150M, ASTM B169/B169M

QQ-C-493 COPPER ANODES QQ-A-673

Pub. No. 24230


85


QQ-C-502 COPPER RODS AND SHAPES; AND FLAT PRODUCTS WITH FINISHED EDGES (FLAT WIRE, STRIPS AND BARS)

ASTM B133, ASTM B272

QQ-C-504 COPPER, BUS BARS (INCLUDING BARS, RODS, AND SHAPES) QQ-B-825

QQ-C-521 COPPER INGOT ASTM B5, ASTM B216, ASTM B442

QQ-C-523 COPPER ALLOY INGOTS; BRASS (YELLOW, HIGH STRENGTH) MANGANESE AND MANGANESE-ALUMINUM BRONZE (FOR REMELTING)

ASTM B30

QQ-C-525 COPPER ALLOY INGOTS (LEADED AND NONLEADED TIN BRONZE, RED BRASS, AND SEMI-RED BRASS)

ASTM B30

QQ-C-530 COPPER-BERYLLIUM ALLOY BAR, ROD, AND WIRE (COPPER ALLOY NUMBERS 172 AND 173)

ASTM B194, ASTM B196/B196M, ASTM B197/B197M

QQ-C-533 COPPER-BERYLLIUM ALLOY STRIP (COPPER ALLOY NUMBERS 170 AND 172) ASTM B194

QQ-C-551 COPPER-NICKEL-ALLOY; CASTINGS QQ-N-288

QQ-C-557 COPPER-NICKEL-ALLOY SHOT ASTM B644

QQ-C-571 COPPER, PHOSPHOR (ALLOYING ADDITIVE) ASTM B644

QQ-C-576 COPPER FLAT PRODUCTS WITH SLIT, SLIT AND EDGE-ROLLED SHEARED, SAWED OR MACHINED EDGES, (PLATE, BAR, SHEET, AND STRIP)

ASTM B152/B152M

QQ-C-581 COPPER, SILICON (ALLOYING ADDITIVE) ASTM B644

Pub. No. 24230


86


QQ-C-585 COPPER-NICKEL-ZINC ALLOY PLATE, SHEET, STRIP, AND BAR (COPPER ALLOY NUMBERS 735, 745, 752, 762, 766, AND 770)

ASTM B122/B122M

QQ-C-586 COPPER-NICKEL-ZINC ALLOY: ROD, SHAPES AND FLAT PRODUCTS WITH FINISHED EDGES (FLAT WIRE, STRIP, AND BAR)

ASTM B122/B122M, ASTM B151/B151M, ASTM B206/B206M, ASTM B151M

QQ-C-591 COPPER-SILICON, COPPER-ZINC-SILICON, AND COPPER-NICKEL-SILICON ALLOYS: ROD, WIRE, SHAPES, FORGINGS, AND FLAT PRODUCTS (FLAT WIRE, STRIP, SHEET, BAR, AND PLATE)

ASTM B124/B124M, ASTM B98/B98M, ASTM B105, ASTM B99/B99M

QQ-C-593 COPPER-SILICON ALLOY CASTINGS QQ-C-390

QQ-C-806 CULVERTS AND UNDERDRAINS, CORRUGATED IRON OR STEEL ZINC COATED WW-P-405

QQ-E-450 ELECTRODES, WELDING, COVERED: MILD STEEL AWS A5.1/A5.1M

QQ-F-151 FERROCHROMIUM QQ-F-145

QQ-F-161 FERROMANGANESE QQ-F-145

QQ-F-171 FERROMOLYBDENUM QQ-F-145

QQ-F-181 FERROSILICON QQ-F-145

Pub. No. 24230


87


QQ-F-191 FERROTITANIUM QQ-F-145

QQ-F-201 FERROVANADIUM QQ-F-145

QQ-F-455 FLOOR PLATE, STEEL, ROLLED (MODULAR, FOR CONCRETE FLOORS) TT-C-535

QQ-G-00540 GOLD ALLOY, CASTING, DENTAL A-A-53884

QQ-I-652 IRON CASTING, GRAY ASTM A48/A48M

QQ-I-706 IRON AND STEEL, SHEET, TINNED (TIN-PLATE) QQ-T-425

QQ-I-716 IRON AND STEEL, SHEET, ZINC-COATED (GALVANIZED) QQ-S-775

QQ-L-00156 LEAD, CALKING QQ-C-40

QQ-L-101 LATH, METAL, (AND OTHER METAL PLASTER BASES) ASTM C847

QQ-L-225 LEADED TIN BRONZE CASTINGS AND HIGH LEADED TIN BRONZE CASTING QQ-B-1005

QQ-M-161 METAL, ANTIFRICTION; CASTINGS AND INGOTS QQ-T-390

QQ-M-31 MAGNESIUM ALLOY BARS, RODS, AND SPECIAL SHAPED SECTIONS, EXTRUDED

ASTM B107/B107M

QQ-M-38 MAGNESIUM ALLOY DIE CASTINGS (AZ91A) ASTM B94

Pub. No. 24230


88


QQ-M-40 MAGNESIUM ALLOY FORGINGS ASTM B661, ASTM B91

QQ-M-44 MAGNESIUM ALLOY PLATE AND SHEET (AZ31B) AMS4376, AMS4377, AMS4375

QQ-M-55 MAGNESIUM ALLOY, PERMANENT AND SEMI-PERMANENT MOLD CASTINGS ASTM B199

QQ-M-56 MAGNESIUM ALLOY, SAND CASTINGS ASTM B80

QQ-M-80 MANGANESE BRONZE BARS, PLATES, RODS, SHEETS, STRIPS, FLAT WIRE, FORGINGS, AND STRUCTURAL AND SPECIAL SHAPED SECTIONS

QQ-B-728

QQ-N-265 NICKEL; ANODES QQ-A-677

QQ-N-288 NICKEL-COPPER ALLOY AND NICKEL-COPPER-SILICON ALLOY CASTINGS ASTM A494/A494M, MIL-C-24723

QQ-N-290 NICKEL PLATING (ELECTRODEPOSITED) AMS-QQ-N-290

QQ-N-30 NAVAL BRASS; PLATE, ROLLED BAR, SHEET AND STRIP QQ-B-639

QQ-N-35 NAVAL BRASS, RODS, BARS, WIRE, SHAPES AND FORGINGS AND FLAT PRODUCTS WITH FINISHED EDGES

QQ-B-637

QQ-P-00345 PHOSPHOR COPPER: DEOXIDIZING ADDITIVE QQ-C-571

QQ-P-330 PHOSPHOR BRONZE BARS, PLATES, RODS, SHEETS, STRIPS, FLAT WIRE, AND STRUCTURAL AND SPECIAL SHAPED SECTIONS

QQ-B-750

Pub. No. 24230


89


QQ-P-35 PASSIVATION TREATMENTS FOR CORROSION-RESISTANT STEEL AMS-QQ-P-35, AMS2700

QQ-P-416 PLATING, CADMIUM (ELECTRODEPOSITED) AMS-QQ-P-416

QQ-P-428 PLATINUM FOIL (DENTAL) A-A-53475

QQ-R-566 RODS AND ELECTRODES, WELDING, ALUMINUM AND ALUMINUM ALLOYS AWS A5.10/A5.10M

QQ-R-571 RODS, WELDING, COPPER AND NICKEL ALLOYS A-A-51173, A-A-51157, A-A-51158

QQ-S-00629 STEEL, ALLOY; TUBING, MECHANICAL, ROUND: SEAMLESS AND WELDED QQ-T-00825

QQ-S-00640 STEEL, CARBON: SHEET AND STRIP QQ-S-698, QQ-S-700, MIL-S-46049, QQ-S-777

QQ-S-00643 STEEL, CARBON: TUBING, MECHANICAL, ROUND: SEAMLESS AND WELDED QQ-T-830

QQ-S-00778 STEEL, TOOL, ALLOY QQ-T-570

QQ-S-00779 STEEL, TOOL, CARBON AND CARBON-VANADIUM QQ-T-580

Pub. No. 24230


90


QQ-S-00780 STEEL, TOOL, HIGH SPEED NO REPLACEMENT

QQ-S-365 SILVER PLATING, ELECTRODEPOSITED; GENERAL REQUIREMENTS FOR ASTM B700

QQ-S-561 SOLDER, SILVER QQ-B-654

QQ-S-571 SOLDER, ELECTRONIC (96 TO 485 °C) IPC J-STD-006, IPC J-STD-005, IPC J-STD-004

QQ-S-611 SPIEGELEISEN QQ-F-145

QQ-S-624 STEEL, BAR, ALLOY, HOT ROLLED AND COLD FINISHED (GENERAL PURPOSE) ASTM A331, ASTM A322, ASTM A304

QQ-S-626 STEEL PLATE, ALLOY (STRUCTURAL/QUALITY) ASTM A829/A829M

QQ-S-628 STEEL BARS AND FORGINGS, GRAPHITIC QQ-T-570

QQ-S-630 STEEL, BAR, CARBON, HOT ROLLED (MERCHANT QUALITY) ASTM A663/A663M, ASTM A575

QQ-S-631 STEEL, BAR, CARBON, HOT ROLLED (SPECIAL QUALITY) ASTM A576, ASTM A675/A675M

Pub. No. 24230


91


QQ-S-632 STEEL BAR, REINFORCING (FOR CONCRETE) ASTM A616/A616M, ASTM A617/A617M, ASTM A615/A615M

QQ-S-633 STEEL BARS, CARBON, COLD FINISHED AND HOT ROLLED (GENERAL PURPOSE)

QQ-S-630, QQ-S-631, QQ-S-634, QQ-S-637

QQ-S-634 STEEL, BAR, CARBON, COLD-FINISHED, (STANDARD QUALITY) ASTM A108

QQ-S-635 STEEL PLATE, CARBON ASTM A827/A827M

QQ-S-636 STEEL, CARBON (LOW-CARBON), SHEETS AND STRIPS QQ-S-698

QQ-S-637 STEEL BAR, CARBON, COLD FINISHED (STANDARD QUALITY, FREE MACHINING) ASTM A108

QQ-S-681 STEEL CASTINGS ASTM A148/A148M, ASTM A27/A27M

QQ-S-682 STEEL, CORROSION-RESISTING-CLAD PLATES, SHEETS, AND STRIPS ASTM A265, ASTM A263, ASTM A264

QQ-S-691 STEEL PLATE, CARBON SILICON, CARBON MOLYBDENUM AND MANGANESE MOLYBDENUM ALLOYS HOT ROLLED, (MARINE BOILER QUALITY)

ASTM A302/A302M, ASTM A204/A204M, ASTM A516/A516M, ASTM A515/A515M

Pub. No. 24230


92


QQ-S-692 STEEL SHEETS, CARBON, COLD ROLLED QQ-S-698, QQ-S-700, QQ-S-777

QQ-S-693 STEEL, SHEET, CARBON, HOT-ROLLED QQ-S-698, QQ-S-700, QQ-S-777

QQ-S-700 STEEL SHEET AND STRIP, MEDIUM AND HIGH CARBON AMS-QQ-S-700

QQ-S-741 STEEL, CARBON: STRUCTURAL SHAPES; PLATES; AND BARS ASTM A36/A36M

QQ-S-763 STEEL BARS, WIRE, SHAPES, AND FORGINGS; CORROSION RESISTANT AMS-QQ-S-763

QQ-S-764 STEEL BAR, CORROSION RESISTING, FREE MACHINING ASTM A484/A484M, ASTM A582/A582M

QQ-S-766 STEEL, STAINLESS AND HEAT RESISTING, ALLOYS, PLATE, SHEET AND STRIP ASTM A240/A240M, ASTM A666, ASTM A693

Pub. No. 24230


93


QQ-S-775 STEEL SHEETS, CARBON, ZINC-COATED (GALVANIZED) BY THE HOT-DIPPED PROCESS

ASTM A526/A526M, ASTM A642/A642M, ASTM A444/A444M, ASTM A528/A528M, ASTM A527/A527M, ASTM A361/A361M

QQ-S-777 STEEL, CARBON, STRIP, COLD-ROLLED, UNTEMPERED SPRING QUALITY ASTM A682/A682M, ASTM A684/A684M

QQ-S-781 STRAPPING, STEEL, AND SEALS ASTM D3953

QQ-S-790 STEEL STRAPPING, ROUND (BARE AND ZINC COATED) QQ-S-781

QQ-T-00276 TIN FOIL, (FOR DENTAL USE) A-A-50974

QQ-T-00825 TUBE, STEEL, ALLOY; MECHANICAL, ROUND, SEAMLESS AND WELDED ASTM A519/A519M, ASTM A513/A513M

QQ-T-181 TERNE PLATES (FOR MANUFACTURING PURPOSES) QQ-T-191

QQ-T-371 TIN, PIG ASTM B339

QQ-T-390 TIN ALLOY INGOTS AND CASTINGS AND LEAD ALLOY INGOTS AND CASTINGS (ANTIFRICTION METAL) FOR BEARING APPLICATIONS

ASTM B23

QQ-T-40 TAPE, FISH, STEEL (FOR ELECTRICIANS USE) GGG-T-001310

Pub. No. 24230


94


QQ-T-425 TIN PLATE (ELECTROLYTIC) ASTM A623/A623M, ASTM A626/A626M, ASTM A630, ASTM A624/A624M

QQ-T-570 TOOL STEEL, ALLOY ASTM A681

QQ-T-580 TOOL STEEL, CARBON & CARBON-VANADIUM ASTM A686

QQ-T-590 TOOL STEEL, HIGH-SPEED ASTM A600

QQ-W-321 WIRE, COPPER ALLOY ASTM B134/B134M, ASTM B206/B206M, ASTM B159/B159M, ASTM B159M

QQ-W-336 WIRE; COPPER, HARD-DRAWN QQ-W-343

QQ-W-339 WIRE; COPPER, MEDIUM-HARD DRAWN QQ-W-343

QQ-W-340 WIRE, COPPER-NICKEL-ZINC ALLOY (COPPER ALLOY NUMBERS 745, 752, 757, 764, 770 AND 794)

QQ-W-321

QQ-W-343 WIRE, ELECTRICAL, COPPER (UNINSULATED) A-A-59551

Pub. No. 24230


95


QQ-W-348 WIRE, FISH (FOR ELECTRICIANS AND PLUMBERS USE QQ-T-40, GGG-A-821

QQ-W-390 WIRE, NICKEL-CHROMIUM-IRON ALLOY ASTM B166

QQ-W-401 WIRE, ROUND, COPPER ALLOY NUMBER 510 (PHOSPHOR-BRONZE A); SPRING QQ-W-321

QQ-W-405 WIRE, STEEL, CARBON AND ALLOY (FOR COLD HEADING AND COLD FORGING) ASTM A547, ASTM A545, ASTM A548, ASTM A549, ASTM A546

QQ-W-409 WIRE, STEEL, CARBON (FOR COLD HEADING AND COLD FORGING) QQ-W-405

QQ-W-418 WIRE, STEEL, COLD DRAWN, FOR CONCRETE REINFORCEMENT ASTM A82/A82M

QQ-W-421 WIRE, STEEL, COPPER COVERED QQ-W-345

QQ-W-423 WIRE, STEEL, CORROSION-RESISTING ASTM A580/A580M, ASTM A313/A313M

QQ-W-428 WIRE, STEEL, CARBON (HIGH CARBON, ROUND, FOR MECHANICAL SPRINGS, GENERAL PURPOSE)

AMS-QQ-W-428

QQ-W-432 WIRE, STEEL; MARKET QQ-W-461

Pub. No. 24230


96


QQ-W-446 WIRE; STEEL, ZINC-COATED (FOR WIRE-BOUND BOXES) NN-B-631

QQ-W-461 STEEL WIRE, CARBON FOR GENERAL USE ASTM A809, ASTM A641/A641M, ASTM A818, ASTM A853

QQ-W-465 WIRE, STEEL (CARBON), HARD-DRAWN, SPRING AND ZINC COATED HIGH STRENGTH.

QQ-W-428

QQ-W-470 WIRE, STEEL, CARBON, SPRING, MUSIC ASTM A228/A228M

QQ-W-474 WIRE; STEEL (CARBON AND ALLOY), SPRING, OIL-TEMPERED AND ANNEALED QQ-W-428

QQ-W-486 WIRE AND RIBBON; RESISTANCE QQ-R-175

QQ-Z-301 ZINC SHEET AND STRIP ASTM B69

QQ-Z-325 ZINC COATING, ELECTRODEPOSITED ASTM B633

QQ-Z-363 ZINC-BASE ALLOY; DIE CASTINGS ASTM B86

TT-C-535 COATING, EPOXY, TWO-COMPONENT, FOR INTERIOR USE ON METAL, WOOD, WALLBOARD, PAINTED SURFACES, CONCRETE AND MASONRY

A-A-312

TT-W-535 WOOD PRESERVATIVE: FLUOR CHROME ARSENATE PHENOL MIXTURE AWPA P5

Pub. No. 24230


97


WW-P-405 PIPE, CORRUGATED (IRON OR STEEL, ZINC COATED) ASTM A762/A762M, ASTM A849, ASTM A760/A760M, ASTM A761/A761M

Documents

CANCELLED AND SUPERSEDED SPECIFICATIONS LIST...In cases where the engineering drawing requires Special Bar Quality (SBQ) such as Vacuum Induction Melting (VIM) or Vacuum Arc Melting