Embed Size (px)
Citation preview
CAD-371A Generic Interpretation
Understanding CAD-371
Flight and Duty Time Limitations and Rest Requirements.
Version 1.1
Copyright © 2012-2015 Understanding CAD-371 – A Generic Interpretation All rights reserved.
Disclaimer
The documentation is provided “AS IS” and is solely intended to provide a general understanding of the author’s interpretation of the new CAD 371 as amended on 01-May-2010.
The author makes no representations and disclaims any and all responsibility for the completeness or accuracy of the documentation.
The author reserves the right, at his discretion, to change or modify the documentation as deemed appropriate.
Copyright © 2012-2015, Understanding CAD 371 – A Generic Interpretation. All rights reserved.
Copyright © 2012-2015 Understanding CAD-371 – A Generic Interpretation All rights reserved.
Module 1:
Introduction
Copyright © 2012-2015 Understanding CAD-371 – A Generic Interpretation All rights reserved.
IntroductionThis Regulation shall enter into force on the 01-May-2010.
The Regulation aligns practices with ICAO Annex 6 Part SARPS, EASA, CAP-371 and international standard practices.
CAD-371 is primarily based upon UK CAA - CAP 371 and it is recommended operators and crew members are also familiar with the interpretations of both sets of regulations.
Copyright © 2012-2015 Understanding CAD-371 – A Generic Interpretation All rights reserved.
Intent of this presentationTo summarize the following sections of CAD-371
CAD-371.7 DefinitionsCAD-371.8.4 Delayed Reporting Time CAD-371.11.1 FDP-AeroplanesCAD-371.11.3.1 Extension of flight duty period by in-flight reliefCAD-371.11.3.2 Extension of flight duty period by Split DutyCAD-371.12 Long range operationsCAD-371.13 Ultra Long range operationsCAD-371.14 Commanders DiscretionCAD-371.19 Standby DutyCAD-371.20 Rest PeriodsCAD-371.21 Recovery PeriodsCAD-371.22 Domestic Days-off (DDO)CAD-371.23 Flying Hour Limitations – aeroplane operationsCAD-371.24 Duty Hour Limitations – aeroplane operationsCAD-371.28 Cabin crew
Copyright © 2012-2015 Understanding CAD-371 – A Generic Interpretation All rights reserved.
Not included in this presentationCAD-371.1 Legal BackgroundCAD-371.2 Objectives of Approved FTL Schemes CAD-371.3 Responsibilities of operatorsCAD-371.4 Responsibilities of crew membersCAD-371.5 Application of the Standard ProvisionsCAD-371.6 Variations of the Standard ProvisionsCAD-371.16 Mixed dutiesCAD-371.17 Travelling timeCAD-371.18 PositioningCAD-371.25 Courses and Ground Duties Away From BaseCAD-371.26 Records to be maintainedCAD-372.27 Sector TimesCAD-371.29 Business Jet OperationsCAD-371.30 Helicopter Operations CAD-371.31 Air Ambulance FlightsCAD-371.32 Single Pilot Operations - Aeroplanes
Copyright © 2012-2015 Understanding CAD-371 – A Generic Interpretation All rights reserved.
CAD-371A Generic Interpretation
Understanding CAD-371
Flight and Duty Time Limitations and Rest Requirements.
Version 1.1
Copyright © 2012-2015 Understanding CAD-371 – A Generic Interpretation All rights reserved.
