9
Page 1/9 ©2021 Kistler Group, Eulachstraße 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, [email protected], www.kistler.com. Kistler Group products are protected by various intellectual property rights. For more details visit www.kistler.com. This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. 1511_000-471e-02.21 Type 1511 ... 1794A for accelerometers & selected pressure & force sensors Cables & connector adapters Accessories – acceleration 10-32 pos. 5-44 pos. BNC pos. BNC pos. Type 1761B... Type 1768A...K01 (flexible) Type 1632A... (hex. 10-32 nut) Type 1511A... 10-32 pos. Type 1762B... Type 1768A...K02 (flexible) 10-32 neg. Type 1766AK01sp Voltage mode single-axis IEPE cables 10-32 pos. BNC pos. 5-44 pos. 10-32 pos. Type 1635A... Type 1635C... (low noise) Type 1631A... Type 1631C... (low noise) Type 1632A... (hex. 10-32 nut) Type 1641Asp (right angle) Type 1766AK03sp (low noise) 10-32 neg. Type 1637C... BNC pos. Type 1631A... Type 1631CRK01sp (low noise) Type 1631C... (low noise) Type 1632A... (hex. 10-32 nut) Type 1641Asp (right angle) Type 1601B... Type 1766AK04sp (low noise) BNC neg. Type 1603B... High impedance cables Used with high impedance, charge mode with low impedance voltage mode and capacitive sensors. Standard cable lengths are detailed in meters. User specified lengths are labeled “sp". Note: Unspecified lower temperature limit of cable is determined by operating temperate of sensor in use.

Cables & connector adapters

  • Upload
    others

  • View
    23

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Cables & connector adapters

Page 1/9

©2021 Kistler Group, Eulachstraße 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, [email protected], www.kistler.com. Kistler Group products are protected by various intellectual property rights. For more details visit www.kistler.com.

This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded.

1511

_000

-471

e-02

.21

Type 1511 ... 1794A

for accelerometers & selected pressure & force sensors

Cables & connector adapters

Accessories – acceleration

10-32 pos. 5-44 pos. BNC pos.

BNC pos. Type 1761B...Type 1768A...K01 (flexible)Type 1632A... (hex. 10-32 nut)

Type 1511A...

10-32 pos.Type 1762B...Type 1768A...K02 (flexible)

10-32 neg.Type 1766AK01sp

Voltage mode single-axis IEPE cables

10-32 pos. BNC pos. 5-44 pos.

10-32 pos.Type 1635A...Type 1635C... (low noise)

Type 1631A...Type 1631C... (low noise)Type 1632A... (hex. 10-32 nut)Type 1641Asp (right angle)

Type 1766AK03sp (low noise)

10-32 neg.

Type 1637C...

BNC pos. Type 1631A...Type 1631CRK01sp (low noise)Type 1631C... (low noise)Type 1632A... (hex. 10-32 nut)Type 1641Asp (right angle)

Type 1601B... Type 1766AK04sp (low noise)

BNC neg.

Type 1603B...

High impedance cables

Used with high impedance, charge mode with low impedance voltage mode and capacitive sensors. Standard cable lengths are detailed in meters. User specified lengths are labeled “sp".

Note: Unspecified lower temperature limit of cable is determined by operating temperate of sensor in use.

Page 2: Cables & connector adapters

Page 2/9

©2021 Kistler Group, Eulachstraße 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, [email protected], www.kistler.com. Kistler Group products are protected by various intellectual property rights. For more details visit www.kistler.com.

This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded.

1511

_000

-471

e-02

.21

Connector adaptors - for accelerometers & selected pressure & force sensors, type 1511...1794A

¼–28, 4 pin neg. 9 pin circular neg. 9 pin D-Sub neg.

Pigtail open-ended

Type 1592M1...Type 1534A...K00 (flexible)Type 1592M1Q1 (IP68)Type 1592M2... (low smoke)

Type 1792A...K00 (flexible)Type 1792A...KB00 (braided)Type 1792A...K10 (low smoke)

¼–28, 4 pin pos. Type 1578A...

9 pin D-Sub pos. Type 1792A...K01 (flexible)Type 1792A...KB01 (braided)

BNC signal output + power banana jacks Type 1786Dsp (for 8316A...)

Type 1794A (for 8396A...)

Voltage mode capacitive cables

¼–28, 4 pin neg. M4.5, 4 pin neg. ¼–28, 4 pin pos.

3 x BNC pos. Type 1756C...K04Type 1756CLK04sp (low outgassing)Type 1734A...K04 (flexible)Type 1734ALK04sp (flexible, low outgassing)Type KIG4898C...Q1 (IP68)

Type 1784B...K03Type 1784BLK03sp (low outgassing)

¼–28, 4 pin neg. Type 1592A... Type 1578M011sp (low outgassing)Type 1578A...

Pigtailopen-ended

Type 1534A...K00 (flexible)Type 1756CK00sp (low outgassing)

Type 1784M015sp (low outgassing)

¼–28, 4 pin pos. Type 1578M011sp (low outgassing)Type 1578A...

Type 1784M016sp (low outgassing)Type 1784M017sp (flexible)Type 1784AK02sp

3 x 10-32 pos. Type 1756C...K05

Voltage mode triaxial IEPE cables

Page 3: Cables & connector adapters

Page 3/9

©2021 Kistler Group, Eulachstraße 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, [email protected], www.kistler.com. Kistler Group products are protected by various intellectual property rights. For more details visit www.kistler.com.

This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded.

1511

_000

-471

e-02

.21

Connector adaptors - for accelerometers & selected pressure & force sensors, type 1511...1794A

Detailed specifications - by type No.Dimensions are shown in mm [in], unless otherwise noted.

1511A... General purpose electronics output cable and low imped-ance, voltage mode, non-low noise sensor extension cable

BNCpos. IP40

Ø 3.1 [0.12]

BNCpos. IP40

Temperature range °C [°F] -10 ... 70 [20 ... 160]Capacitance pF/m [pF/ft] 66 [20]Cable lengths m 1/spCable materials polyethylene insulation & PVC jacketRecommended sensor types voltage mode, IEPE sensors

1534A...K00 Flexible signal output cable for voltage mode sensors

¼–28, 4 pin neg. IP50

Ø 2.5 [0.098]

Pig tail34 AWG

Temperature range °C [°F] <200 [<390]Cable length m 2/5/10/spCable materials flexible silicone jacketedRecommended sensor types triaxial voltage mode/IEPE sensors or

single-axis capacitive

1578A... Extension cable for voltage mode sensors

¼–28, 4 pin neg. IP50

Ø 2.5 [0.098]

¼–28, 4 pin pos. IP64

Temperature range °C [°F] <200 [<390]Cable length m 2/spCable materials fluoropolymer jacketedRecommended sensor types triaxial voltage mode/IEPE sensors or

single-axis capacitive

1592M1... Signal output cable for single-axis capacitive sensors (Type 8316A...)

¼–28, 4 pinneg. IP50

Ø 2.5[0.098]

Pig tail30 AWG

Temperature range °C [°F] <100 [<212]Cable length m 2/spCable materials fluoropolymer jacketedRecommended sensor type single-axis capacitive sensors

(Type 8316A...)

1592M1Q1 Signal output cable for single-axis capacitive sensors

¼–28, 4 pinneg. IP68

Ø 2.5[0.098]

Pig tail30 AWG

Temperature range °C [°F] <100 [<212]Cable length m 2Cable materials fluoropolymer jacketedRecommended sensor types single-axis capacitive sensors

(Type 8316A...)

21

3 4Connectorend view

Electrical Interface Function Output

Pin number Wire Color AT, BT Output Types C0, D0 Output Types1

2

3

4-

Red

Black

Yellow

White

Shield

Power

Return

Temp.

Output +

Power

Return

Output +

Output -

Case Case

Type 8316A...

1592A... Signal output cable for voltage mode sensors

¼–28, 4 pinneg. IP50

Ø 2.5[0.098]

¼–28, 4 pinneg. IP50

Temperature range °C [°F] <200 [<390]Cable length m 2/4/spCable materials fluoropolymer jacketedRecommended sensor type triaxial voltage mode/IEPE sensors

RedBlack

White YellowConnectorend view

BlackRed

Yellow WhiteConnectorend view

Red Black

Green WhiteConnectorend view

21

3 4Connectorend view

RedBlack

White YellowConnectorend view

BlackRed

Yellow WhiteConnectorend view

Red-XBlack-GND

White-Y Yellow-ZConnectorend view

Red-XBlack-GND

White-Y Yellow-ZConnectorend view

Electrical Interface Function Output

Pin number Wire Color AT, BT Output Types C0, D0 Output Types1

2

3

4-

Red

Black

Yellow

White

Shield

Power

Return

Temp.

Output +

Power

Return

Output +

Output -

Case Case

Type 8316A...

1578M011sp Low outgassing extension cable for voltage mode sen-sors

¼–28, 4 pin neg. IP50

Ø 2.5 [0.098]

¼–28, 4 pin pos. IP64

Temperature range °C [°F] <200 [<390]Cable length m spCable materials fluoropolymer jacketed –

low outgassing materials ***

Recommended sensor type triaxial voltage mode/IEPE sensors or single-axis capacitive

RedBlack

White YellowConnectorend view

BlackRed

Yellow WhiteConnectorend view

RedBlack

White YellowConnectorend view

BlackRed

Yellow WhiteConnectorend view

*** See Space Testing brochure 961-096 for low outgassing details.

Page 4: Cables & connector adapters

Page 4/9

©2021 Kistler Group, Eulachstraße 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, [email protected], www.kistler.com. Kistler Group products are protected by various intellectual property rights. For more details visit www.kistler.com.

This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded.

1511

_000

-471

e-02

.21

Connector adaptors - for accelerometers & selected pressure & force sensors, type 1511...1794A

Detailed specifications - by type No. (continued...)Dimensions are shown in mm [in], unless otherwise noted.

1603B... Extension cable for high impedance, charge mode sensors

BNC neg. IP40

Ø 3.0[0.12]

BNCpos. IP40

Temperature range °C [°F]

-10 ... 70[20 ... 160]

Capacitance pF/m [pF/ft] 66 [20]Cable length m 2/5/10/20/spCable materials polyethylene insulation & PVC jacketRecommended sensor type charge mode piezoelectric sensors

1632A... Output cable for high impedance, charge mode sensors

10-32hex. nut

Ø 2.0[0.078]

BNCpos. IP40

Temperature range °C[°F]

-195 ... 200[-320 ... 400]

Capacitance pF/m [pF/ft] 100 [30]Cable length m 3/ 7/10/spCable materials fluoropolymer insulation & green

extruded flouropolymer outer jacketRecommended sensor types charge mode piezoelectric sensors

1601B... Extension cable for high impedance, charge mode sensors

BNC pos. IP40

Ø 3.0[0.12]

BNCpos. IP40

Temperature range °C [°F]

-10 ... 70 [20 ... 160]

Capacitance pF/m [pF/ft] 66 [20]Cable length m 1/2/5/10/20/spCable materials polyethylene insulation & PVC jacketRecommended sensor types charge mode piezoelectric sensors

1631A... Output cable for high impedance, charge mode sensors

10-32pos. IP65

Ø 2.0[0.078]

BNCpos. IP40

Temperature range °C[°F]

-195 ... 200[-320 ... 400]

Capacitance pF/m [pF/ft] 100 [30]Cable length m 1/2/3/5/spCable materials fluoropolymer insulation & blue

fluoropolymer outer jacketRecommended sensor types charge mode piezoelectric sensors

1631C... Low noise output cable for high impedance, charge mode sensors

10-32pos. IP65

Ø 2.0[0.078]

BNCpos. IP40

Temperature range °C[°F]

-195 ... 200[-320 ... 400]

Capacitance pF/m [pF/ft] 100 [30]Cable length m 1/2/3/5/10/20 /

spCable materials fluoropolymer insulation & green

extruded fluoropolymer outer jacketRecommended sensor type charge mode piezoelectric sensors

1631CRK01sp Low noise output cable for charge mode sensors

10-32 pos.pos. IP65

Ø 1.95 [0.077]

BNC pos.

Temperature range °C[°F]

-20 ... 260 [-4 ... 500]

Cable length m spCable materials PTFE insulation & black FPM outer

jacketRecommended sensor type charge mode piezoelectric sensors

21

3 4Connectorend view

Electrical Interface Function Output

Pin number Wire Color AT, BT Output Types C0, D0 Output Types1

2

3

4-

Red

Black

Yellow

White

Shield

Power

Return

Temp.

Output +

Power

Return

Output +

Output -

Case Case

Type 8316A...

1592M2... Halogen-free/low smoke signal output cable for single-axis capacitive sensors (Type 8316A...)

¼–28, 4 pinneg. IP50

Ø 2.5[0.098]

Pig tail30 AWG

Temperature range °C [°F] <100 [<212]Cable length m 2/spCable materials black halogen-free TPE jacketRecommended sensor types single-axis capacitive sensors

(Type 8316A...)

Page 5: Cables & connector adapters

Page 5/9

©2021 Kistler Group, Eulachstraße 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, [email protected], www.kistler.com. Kistler Group products are protected by various intellectual property rights. For more details visit www.kistler.com.

This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded.

1511

_000

-471

e-02

.21

Connector adaptors - for accelerometers & selected pressure & force sensors, type 1511...1794A

Detailed specifications - by type No. (continued...)Dimensions are shown in mm [in], unless otherwise noted.

1734A...K04/LK04 Flexible signal output cable for triaxial voltage mode accelerometers

¼–28,4 pin neg.

IP50

Ø 2.5[0.098]

BNCpos. IP40

Temperature range °C [°F] <200 [<400] (from sensor to breakout cable)

Cable length m 1/3/5/10/sp (max. 10 m)

Cable materials 1734A...K04: flexible silicone jacketed1734ALK04sp: flexible silicone jacket-ed - low outgassing materials ***

Recommended sensor types triaxial voltage mode/IEPE sensors

Red-XGND

Yellow-Y White-ZConnectorend view

1756C...K04/LK04 Signal output cable for triaxial voltage mode accelerometers

¼–28, 4 pin neg.

IP50

Ø 2.5[0.10]

BNCpos. IP40

Temperature range °C [°F] -196 ... 200 [-320 ... 400](from sensor to breakout cable)

Cable length m 3/5/10/sp(max. 20 m)

Cable materials 1756C...K04: fluoropolymer jacketed1756CLK04sp: fluoropolymer jacket-ed - low outgassing materials ***

Recommended sensor types triaxial voltage mode/IEPE sensors

Red-XGND

Yellow-Y White-ZConnectorend view

KIG4898C...Q1 IP68 signal output cable for triaxial voltage mode accelerometers

¼–28, 4 pin neg.

IP68

Ø 2.5 [0.10]

BNC pos.IP40

Temperature range °C [°F] <200 [<392] (from sensor to breakout cable)

Cable length m 3/7 /15/sp (max. 15 m)

Cable materials fluoropolymer jacketedRecommended sensor type triaxial voltage mode/IEPE sensors

Red-XGND

Yellow-Y White-ZConnectorend view

1641Asp Right-angle output cable for high impedance, charge mode sensors

10-32pos. IP65

Ø 2.0[0.078]

BNCpos. IP40

Temperature range °C[°F]

-195 ... 200[-320 ... 400]

Capacitance pF/m [pF/ft] 100 [30]Cable length m spCable materials fluoropolymer insulation & blue

fluoropolymer outer jacketRecommended sensor types charge mode piezoelectric sensors

1637C... Extension cable for high impedance, charge mode sensors

10-32 pos. IP65

Ø 2.0[0.078]

10-32neg. IP65

Temperature range °C[°F]

-195 ... 200[-320 ... 400]

Capacitance pF/m [pF/ft] 100 [30]Cable length m 2/5/spCable materials fluoropolymer insulation & green

extruded fluoropolymer outer jacketRecommended sensor types charge mode piezoelectric sensors

1635A/C... Extension cable for high impedance, charge mode sensors

10-32pos. IP65

Ø 2.0[0.078]

10-32pos. IP65

Temperature range °C [°F]

-195 ... 200[-320 ... 400]

Capacitance pF/m [pF/ft] 100 [30]Cable length m 1/2/3/5/spCable materials 1635A...: fluoropolymer insulation &

blue fluoropolymer outer jacket1635C...: fluoropolymer insulation & green extruded fluoropolymer outer jacket (low noise)

Recommended sensor types charge mode piezoelectric sensors

*** See Space Testing brochure 961-096 for low outgassing details.

Page 6: Cables & connector adapters

Page 6/9

©2021 Kistler Group, Eulachstraße 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, [email protected], www.kistler.com. Kistler Group products are protected by various intellectual property rights. For more details visit www.kistler.com.

This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded.

1511

_000

-471

e-02

.21

Connector adaptors - for accelerometers & selected pressure & force sensors, type 1511...1794A

Detailed specifications - by type No. (continued...)Dimensions are shown in mm [in], unless otherwise noted.

1756C...K05 Signal output cable for triaxial voltage mode accelerometers

¼–28, 4 pin neg.

IP50

Ø 2.5[0.10]

10-32 pos.IP65

Temperature range °C [°F] -196 ... 200 [-320 ... 400] (from sensor to breakout cable)

Cable length m 3/5/10/sp (max. 20 m)

Cable materials fluoropolymer jacketedRecommended sensor types triaxial voltage mode/IEPE sensors

1766AK03sp Low noise output cable for charge mode sensors

5-44pos.

Ø 1.95[0.077]

10-32pos.

Temperature range °C [°F] -20 ... 260 [-4 ... 500]Capacitance pF/m [pF/ft] 66 [20]Cable length m spCable materials PTFE insulation & black FPM outer

jacketRecommended sensor types charge mode piezoelectric sensors

1766AK01sp Extension cable for miniature single-axis voltage mode accelerometers

5-44pos. IP64

Ø 1.5[0.06]

10-32neg. IP65

Temperature range °C [°F] <165 [<330]Capacitance pF/m [pF/ft] 66 [20]Cable length m spCable materials flexible silicone jacketedRecommended sensor types Type 8715A

1762B... Extension cable for single-axis voltage mode accelerometers

10-32pos. IP65

Ø 2.0[0.08]

10-32pos. IP65

Temperature range v -195 ... 200[-320 ... 400]

Capacitance pF/m [pF/ft] 66 [20]Cable length m 1/2/3/5/spCable materials fluoropolymer jacketedRecommended sensor type single-axis voltage mode/IEPE sensors

1761B... Signal breakout cable for single-axis voltage mode accelerometers

10-32pos. IP65

Ø 2.0[0.08]

BNC pos.IP40

Temperature range °C[°F]

-195 ... 200[-320 ... 400]

Capacitance pF/m [pF/ft] 66 [20]Cable length m 1/2/3/5/spCable materials fluoropolymer jacketedRecommended sensor types single-axis voltage mode/IEPE sensors

1766AK04sp Low noise output cable for charge mode sensors

5-44pos.

Ø 1.95[0.077]

BNC pos.IP40

Temperature range °C [°F] -20 ... 260 [-4 ... 500]Cable length m spCable materials PTFE insulation & black FPM outer

jacketRecommended sensor types charge mode piezoelectric sensors

Red-XGND

Yellow-Y White-ZConnectorend view

Red-XGND

Yellow-Y White-ZConnectorend view

*** See Space Testing brochure 961-096 for low outgassing details.

1756CK00sp Low outgassing signal output cable for triaxial voltage mode accelerometers

¼–28, 4 pin neg.

IP50

Ø 2.5 [0.10]

30 Pig tailAWG

Temperature range °C [°F] -196 ... 200 [-320 ... 400]

Cable length m spCable materials fluoropolymer jacketed –

low outgassing materials ***Recommended sensor types triaxial voltage mode/IEPE sensors

Page 7: Cables & connector adapters

Page 7/9

©2021 Kistler Group, Eulachstraße 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, [email protected], www.kistler.com. Kistler Group products are protected by various intellectual property rights. For more details visit www.kistler.com.

This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded.

1511

_000

-471

e-02

.21

Connector adaptors - for accelerometers & selected pressure & force sensors, type 1511...1794A

Detailed specifications - by type No. (continued...)Dimensions are shown in mm [in], unless otherwise noted.

1784AK02... Extension cable for miniature 4 pin connector triaxial voltage mode accelerometers

M4.5, 4 pin neg.

IP64

Ø 1.5[0.06]

¼–28, 4 pinpos. IP64

Temperature range °C [°F] <100 [<212]Cable length m 0.5/spCable materials fluoropolymer jacketedRecommended sensor type triaxial voltage mode/IEPE sensors

with mini 4 pin connector

XGND

Y ZConnectorend view

GNDX

Z YConnectorend view

1784M016sp Low outgassing signal output cable for miniature 4 pin connector triaxial voltage mode accelerometers

M4.5,4 pin neg.

IP64

Ø 1.5 [0.06]

¼–28, 4 pinpos. IP64

Temperature range °C [°F] <100 [<212]Cable length m spCable materials fluoropolymer jacketed –

low outgassing materials ***Recommended sensor types triaxial voltage mode/IEPE sensors

with mini 4 pin connector

1784M017sp Flexible extension cable for miniature 4 pin connector triaxial voltage mode accelerometers

M4.5,4 pin neg.

IP64

Ø 1.5 [0.06]

¼–28, 4 pinpos. IP64

Temperature range °C[°F]

-55 ... 125[-65 ... 260]

Cable length m spCable materials polyurethane jacketed – flexibleRecommended sensor types triaxial voltage mode/IEPE sensors

with mini 4 pin connector

1784M015sp Low outgassing signal output cable for miniature 4 pin connector triaxial voltage mode accelerometers

M4.5,4 pin neg.

IP50

Ø 1.5 [0.06]

5 x Pig tail26 AWG

Temperature range °C [°F] <100 [<212]Cable length m spCable materials fluoropolymer jacketed –

low outgassing materials ***Recommended sensor types triaxial voltage mode/IEPE sensors

with mini 4 pin connector

Black-XRed-GND

Yellow-Y White-ZConnectorend view

Cable Braid/Connector Shell-

Brown

XGND

Y ZConnectorend view

GNDX

Z YConnectorend view

XGND

Y ZConnectorend view

GNDX

Z YConnectorend view

1768A...K02 Flexible extension cable for single-axis voltage mode accelerometers

10-32pos. IP65

Ø 2.0[0.08]

10-32pos. IP65

Temperature range °C[°F]

-40 ... 100[-40 ... 212]

Capacitance pF/m [pF/ft] 66 [20]Cable length m 1/2/3/5/spCable materials flexible PVC jacketRecommended sensor types single-axis voltage mode/IEPE sensors

1768A...K01 Flexible extension cable for single-axis voltage modeaccelerometers

10-32pos. IP65

Ø 2.0[0.08]

BNCpos. IP40

Temperature range °C [°F]

-40 ... 100[-40 ... 212]

Capacitance pF/m [pF/ft] 66 [20]Cable length m 1/2/3/5/spCable materials flexible PVC jacketedRecommended sensor types single-axis voltage mode/IEPE sensors

*** See Space Testing brochure 961-096 for low outgassing details.

Page 8: Cables & connector adapters

Page 8/9

©2021 Kistler Group, Eulachstraße 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, [email protected], www.kistler.com. Kistler Group products are protected by various intellectual property rights. For more details visit www.kistler.com.

This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded.

1511

_000

-471

e-02

.21

Connector adaptors - for accelerometers & selected pressure & force sensors, type 1511...1794A

Dimensions are shown in mm [in], unless otherwise noted.

Detailed specifications - by type No. (continued...)

1792A...K01/KB01 Signal output cable for triaxial capacitive accelerometers (Type 8396A...)

9 pin circularneg. IP64

Ø 4.6[0.18]

9 pin D-Subpos.

Cable Type Type 1792A...K01 1792A...KB01Temperature range °C [°F] <150 [<300] <125 [<257]Cable length m 2/5/10/spCable materials flexible silicone

jacketedbraided cable

Recommended sensortypes

triaxial capacitive sensors(Type 8396A...)

Pin 6

Pin 1

Connector End View

SensorConnector

Function Output of Type 8396A... Output Connector

1

2

3

45

Power

Ground

X DC output

Power

Ground

Y DC Output +

6

7

8

9

Mini 9 pinconnector

AT, BTversions

CT, DTversions

X DC output +

Y DC outputZ DC output

9 pin D-Sub

1

2

3

45

9

6

7

8

Z DC Output +Temp. outputTemp. output

N/C

N/C

N/C

X DC Output -

Y DC Output -

Z DC Output -

ConnectorEnd View

1792A...K00/KB00 Signal output cable for triaxial capacitive accelerometers (Type 8396A...)

9 pin circularneg. IP64

Ø 4.6[0.18]

Pig tail28 AWG

Cable Type 1792A...K00 1792A...KB00Temperature range °C [°F] <150 [<300] <125 [<257]Cable length m 2/5/10/spCable materials flexible silicone

jacketedbraided cable

Recommended sensor type

triaxial capacitive sensors(Type 8396A...)

ConnectorEnd View

SensorConnector

Function Output of Type 8396A... Cable Pigtail Color

1

2

3

45

Power

Ground

X DC output

Red

Black

Yellow

White

6

Mini 9 pinconnector

AT, BTversions

Y DC outputZ DC output

Power

Ground

X DC output +

CT, DTversions

Y DC output +Z DC output +

N/CN/C

N/C

78

9

X DC output -

Y DC output -Z DC output -

BlueOrangeTemp. output Temp. output

BrownGreen

Violet

1786Dsp Signal output/power cable for voltage mode accelerometers

¼–28, 4 pin neg.

IP50

Ø 2.5[0.10]

Signal output:BNC pos. IP40;Bipolar power:

2 x banana jacks

Temperature range °C [°F] <100 [<212]Cable length m sp (max. 10 m)Cable materials fluoropolymer jacketedRecommended sensor types single-axis -capacitive sensors

(Type 8316A...)

Black-GNDRed-Power

N/C White-OutputConnectorend view

1784B... K03/LK03 Signal output cable for miniature 4 pin connec-tor triaxial voltage mode accelerometers

M4.5,4 pin neg.

IP64

Ø 1.5[0.06]

BNC pos.IP40

Temperature range °C

[°F]

-40 ... 100 (165 before 3 x BNC Breakout)[-40 ... 212 (329 before 3 x BNC Breakout)]

Cable length m 1/3/5/10/15/spCable materials 1784B...K03: fluoropolymer jacketed

1784BLK03sp: fluoropolymer jacketed – low outgassing materials ***

Recommended sensor types triaxial voltage mode/IEPE sensors with mini 4 pin connector

Red-XGND

Yellow-Y White-ZConnectorend view

*** See Space Testing brochure 961-096 for low outgassing details.

Page 9: Cables & connector adapters

Page 9/9

©2021 Kistler Group, Eulachstraße 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, [email protected], www.kistler.com. Kistler Group products are protected by various intellectual property rights. For more details visit www.kistler.com.

This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded.

1511

_000

-471

e-02

.21

Connector adaptors - for accelerometers & selected pressure & force sensors, type 1511...1794A

Connector adaptors

Type 1701 connector adaptorBNC neg. BNC neg.

Type 1702 connector adaptorSolder terminals KIAG 10-32 pos.

Type 1721 connector adaptorKIAG 10-32 neg. BNC pos.

Type 1723 connector adaptorKIAG 10-32 neg. TNC pos.

Type 1725 connector adaptor

KIAG 10-32 neg. BNC neg.

Type 1729 connector adaptorKIAG 10-32 neg. KIAG 10-32 neg.

Type 1743 connector adaptorBNC neg. BNC neg.

BNC pos.

1794A Signal output/power cable for triaxial capacitive accelerometers (Type 8396A...)

9 pinD-Subneg.

Ø 2.5[0.10]

Signal output:3 x BNC pos. IP40;

Power:2 x banana jacks

Temperature range °C [°F] <100 [<212]Cable length m 2Cable materials fluoropolymer jacketedRecommended sensor types triaxial capacitive sensors

(Type 8396A...)

Connector End View

Pin 1

Pin 6

Pin n˚9 pin D-Sub

Banana (Power),BNC (Output)

Function

1

2

3

45

Red - Banana

Black - Banana

Red - BNC

Power

Ground

Y DC output

X DC output

6

Yellow - BNC

White - BNC Z DC output

GroundShield

1792A...K10 Halogen-free/low smoke signal output for triaxialcapacitive accelerometers (Type 8396A...)

9 pin circularneg. IP64

Ø 4.6[0.18]

Pigtail28 AWG

Temperature range °C [°F] <130 [<265]Cable length m 2/5/10/spCable materials halogen-free, black TPERecommended sensor type triaxial capacitive sensors

(Type 8396A...)

SensorConnector

Function Output of Type 8396A... Cable Pigtail Color

1

2

3

45

Power

Ground

X DC output

Power

Ground

Y DC Output +

6

7

8

9

Mini 9 pinconnector

AT, BTversions

CT, DTversions

X DC output +

Y DC outputZ DC output

Red

Black

Orange/Brown

YellowBlue

Orange

Brown

Green

Yellow/Black

Z DC Output +Temp. outputTemp. output

N/C

N/C

N/C

X DC Output -

Y DC Output -

Z DC Output -

ConnectorEnd View