1/2R2M LTD, Unit 6, Metcalf Drive, Altham Ind Estate,Altham, Accrington, Lancashire, BB5 5TU, U.K. 01282 778030 (6 Lines)www.r2mltd.co.uk

c-QUICK-en REPAIR ENCAPSULATION COLLAR

The c-QUICK-en DUCTILE repair collars provide the fastestpermanent repair fitting to be used to repair leaking sockets or aflat pipe or as a coupling.

* 7 / 10 mm tolerance on pipe outside diameter* suitable for any pipe material* 360° COVERAGE* same fitting can be used to repair flat pipes* same fitting can be used as a coupling to join pipes* installation requires only a wrench* easy installation to be performed on side bolts only.

Code ID c-QUICK-en.120-129.10238Full Code c-QUICK-en.120-129.cL290cD211.L430.DEF

DIMENSIONS

Pd min 1 min allowable pipe diameter 120 mm

Pd max 1 max allowable pipe diameter 129 mm

cL useful length of cavity 290 mm

cD inside diameter of body 211 mm

L body Length of body 430 mm

dR outside diam of end ring 274 mm

W max max side size 300 mm

a° max allowable pipe deflection 8° (+/-4°)

Weight 21 Kg

DESIGNPipe material for which the fittingis suitable

ANY RIGID PIPE

Pipe nominal bore 100mm / 4"

Fluid in pipe line WATER

Allowable operating pressure (PFA) 1.6 MPa (16 bar) (228 psi)

Test pressure 2.5 MPa (25 bar) (357 psi)

Operating tempereature range -40°C/+60°C (-40°F/+140°F)

2/2R2M LTD, Unit 6, Metcalf Drive, Altham Ind Estate,Altham, Accrington, Lancashire, BB5 5TU, U.K. 01282 778030 (6 Lines)www.r2mltd.co.uk

PART MATERIALS STANDARD

1 BODY DUCTILE IRON EN 1583

2 RUBBER RING EPDM EN 681 - 1, WRAS APPROVED

3 SIDE RUBBER EPDM EN 681 - 1, WRAS APPROVED

4 FASTENERS STEEL GRADE 4.8 EN ISO 898-1, 4018, 7091

COATING FBE WRAS APPROVED

REFERENCES

ANSI/AWWA C219 Bolted sleeve-type couplings for plain-end pipes

EN 10025 European standard for structural steel

EN 681-1 Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications

EN ISO 891-1 Mechanical properties of fasteners made of carbon steel and alloy steel

EN ISO 4018 Hexagon head screws. Product grade C

EN ISO 7091 Plain washers: normal series. Product grade C

Allowable connections chart

min OD allowed = 120 mm

Italy Cast Iron = 120,0 mmUNI 4372 CL 10 Asbestos Cement = 120,0 mm

UNI 4372 CL 17,5 Asbestos Cement = 120,0 mmUNI 4372 CL C Asbestos Cement = 120,0 mm

Imperial BS1211 & BS78 CL AB AC = 121,9 mmImperial BS1211 & BS78 CL AB CI = 121,9 mmImperial BS1211 & BS78 CL CD CI = 121,9 mmImperial BS1211 & BS78 CL CD AC = 121,9 mm

BS 486 CL 25 Asbestos Cement = 122,0 mmUNI 4372 CL D Asbestos Cement = 124,0 mm

BS ISO 11922 PVC = 125,0 mmEN 12201 HDPE = 125,0 mm

UNI 4372 CL 12,5 Asbestos Cement = 126,0 mmUNI 4372 CL E Asbestos Cement = 126,0 mm

ISO 4200 series 2 Steel = 127,0 mm

max OD allowed = 129 mm

min OD allowed = 120 mm

Italy Cast Iron = 120,0 mmUNI 4372 CL 10 Asbestos Cement = 120,0 mm

UNI 4372 CL 17,5 Asbestos Cement = 120,0 mmUNI 4372 CL C Asbestos Cement = 120,0 mm

Imperial BS1211 & BS78 CL AB AC = 121,9 mmImperial BS1211 & BS78 CL AB CI = 121,9 mmImperial BS1211 & BS78 CL CD CI = 121,9 mmImperial BS1211 & BS78 CL CD AC = 121,9 mm

BS 486 CL 25 Asbestos Cement = 122,0 mmUNI 4372 CL D Asbestos Cement = 124,0 mm

BS ISO 11922 PVC = 125,0 mmEN 12201 HDPE = 125,0 mm

UNI 4372 CL 12,5 Asbestos Cement = 126,0 mmUNI 4372 CL E Asbestos Cement = 126,0 mm

ISO 4200 series 2 Steel = 127,0 mm

max OD allowed = 129 mm