Embed Size (px)
Citation preview
C 150 HC 150 H x4 C 200 H C 200 H x4 C 250 H C 250 H x4
.
FullGrip® System exclusivo AUSA: Tracción integral por discos múltiples conectable electro-hidráulicamente desde el mando joystick.
Exclusive AUSA FullGrip® System: On demand 4WD connectable by means multiple discs with electro-hydraulic engagement from the joystick.
FullGrip® System de AUSA: 4 RM sur demande au moyen de disques multiples avec connexion électro-hydraulique depui s le joystick.
AUSA FullGrip® System: Elektrohydraulisch, zuschaltbarer Allradantrieb – am Joystick zu betätigen.
Compen® System exclusivo AUSA: Tracción integral permanente que compensa automáticamente el par entre los ejes diferenciales.
Exclusive AUSA Compen® System: Permanent 4WD that compensates automatically the torque between the both axles.
Compen® System de AUSA: 4 RM permanentes qui compense automatiquement le couple entre les deux essieux.
AUSA Compen® System: Permanenter Allradantrieb mit automatischem Drehmoment-Ausgleich zwischen Vorder - Hinter Achse.
AUSA Madrid Pol. Ind. Coslada - C. Marconi 15-17, 28823 Coslada - MADRID (ESPAÑA) - Tel.: +34 91 669 00 06 - E-mail: [email protected] France Z.I. Saint Charles - Rue de Zürich, 66000 PERPIGNAN (FRANCE) - Tel: +33 (0) 4 68 54 38 97 - E-mail: [email protected] Deutschland Tel.: +49 (0) 2384 9889905 - E-mail: [email protected] UK Tel.: +44 (0) 7970639988 - E-mail: [email protected] Brasil Avenida Belizario Ramos 2276 - Lages - SC, 88506-000 (BRASIL) - Tel.: +55 11 9 8786 6014 - E-mail: [email protected] México Calzada Vallejo 725 Del. Gustavo A. Madero - 07750 México D.F. (MÉXICO) - Tel.: +52 (55) 2166 9276 - E-mail: [email protected] U.S. CORP. Tel.: +1 (917) 328 0770 - E-mail: [email protected] Beijing Rep. Office Room 403, Moma Building, N.199 - Chaoyang bei road, Chaoyang District - 100026 BEIJING (CHINA) Tel.: +86 10 8598 7386 - E-mail: [email protected]
AUSA Center, S.L.Ctra. de Vic Km 2.808243 Manresa BARCELONA (ESPAÑA)Tel.: +34 93 874 73 11E-mail: [email protected]
www.ausa.com
FEM-AEM
2500 @ 500 mm / 2300 @ 600 mm
KUBOTA V 2403 M36.5 (SAE J 1995)
4x2 / 4x4 FullGrip®
Hydrostatic with variable flow pump. Electrical reverser in joystick. Inching pedal.
4200 (4x2) / 4300 (4x4)25% (4x2) / 37% (4x4)
12.5 / 80 - 187.00-12 (C250H) / 10.0 / 75 - 15.3 (C250 Hx4)
18-8 cc. double gear pump.Working Pressure 210 bar.
210
1500 @ 500 mm / 1350 @ 600 mm2660
KUBOTA V 150522.7 / 30.8 (SAE J 1995)
4x2 / 4x4 Compen®
Hydrostatic with variable flow pump. Two speed hydrostat ic motor. Electrical
reverser in joystick. Inching pedal.260025%
10.0 / 75 - 15.36.00-9 (C150H) / 23 x 8.50 - 12 (C150 Hx4)
Hydraulic. Working pressure 130 bar.2550 (4x2) / 4000 (4x4)
4540
2 gear pump of 10.6 and 6 cc.Working Pressure 200 bar.
200FEM 2 - Wide 1260 mm
Open tilting CabinErgonomic seat
Seat BeltJoystick with integrated functions
“total control of movements”Rotating beacon
3rd. auxiliary hydraulic service Side-shift: 1260 mm (width)Active security equipmentAudible reverse warning
Semi-closed cabinGreat confort seat
Full cabin with heaterAir conditioning
Radio/Stereo CDAnti theft protection system
Homologated lighting systemWorking ligthts
Catalytic converterSpark arrestor
Fuel oil filter with water separator4th auxiliary hydraulic service5 th auxiliary hydraulic service
300 litre and 400 litre hydraulic bucketsLoad backrest of 1260 mm
Tyres: Solid, flotation, industrialOther multiple attachments fitted
with manufacturer warranty
TECHNICAL SPECIFICATIONSLoad capacity (kg) @ centre of gravityLifting height (Standard duplex mast) (mm)Engine
TractionTransmission
Unladen weight (Kg) (with full tanks)GradeabilitySpeed (Maximum) (Km/h)Engine starting systemTyres
SteeringExternal turning radius (mm)Tank capacity (l)
Service brakeParking brakeHydraulic circuit
Operating pressures for accessoriesForkcarriageStability test standard STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
DieselPower acc. (KW/HP)Nº of cylindersCooling system
Front Rear
Fuel Hydraulic fluid
(A)* (B)*
2000 @ 500 mm / 1850 @ 600 mm
ISUZU 4LE2 / KUBOTA V 2403 M33.8 / 36.5 (SAE J 1995)
4Water
4x2 / 4x4 FullGrip®
Hydrostatic with variable flow pump.Two speed engine. Electrical reverser in joystick.
Inching pedal.3800 (4x2) / 4100 (4x4)26% (4x2) / 38% (4x4)
20Electric12-16.5
7.00-12 (C200H) / 27x10.5-15 (C200 Hx4)
Oil-immersed, multidiscOil-immersed multidisc
18-8 cc. double gear pump.Working Pressure 180 bar.
180
3300
Hydraulic. Working 135 bar.2800 (4x2) / 4040 (4x4)
5040
FEM 2 - Wide: 1260 mm (optional 1600 mm)
Open tilting cabinErgonomic seat with safety belt
Joystick with integrated functions “total control of movements”Rotating beacon
3rd. auxiliary hydraulic service Side-shift: 1260 mm (width)Active security equipmentAudible reverse warning
Chasis mounted integral belly plate
Semi-closed cabinFull cabin with heater
Air conditioningRadio/Stereo CD
Anti theft protection systemHomologated lighting system
Working ligthtsCatalytic converter
Spark ArrestorFuel oil filter with water separator
4 th auxiliary hydraulic service5 th auxiliary hydraulic service
Wide front axleLoad backrest of 1260 mm and 1600 mm
Side-shift: 1600 mm (width)400 litre and 600 litre hydraulic buckets
Tyres: solid, flotation, industrialOther multiple attachments fitted with manufacturer warranty
www.ausa.com
MKT21007.10/09.2015
C 200 H / C 200 Hx4 C 250 H / C 250 Hx4C 150 H / C 150 Hx4
Duplex (Std.)DuplexDuplexDuplex
Triplex (free lift)Triplex (free lift)Triplex (free lift)
Duplex (Std.)Duplex
Duplex (free lift)Triplex (free lift)
-------
1500135015001200
4150345044503530459052306295
----
33002600360045003700430054002660330026004000
Maximum lifting height (mm)
Type of mast
120120120120113013301680
00
13601360
Free lif (mm) C 250 H/Hx4
2460211026103060212023202685
----
C 250 H/Hx4-------
3285392532704670
C 150 H/Hx4-------
1975232519751975
C 150 H/Hx4 C 200 H/Hx4
Machine heigh with mast retracted (mm)Machine heigh with mast
extended (mm)H
C 200 H/Hx42395204525452995204522452610
----
4215351545155415466553006370
----
Load (Kg) at max. height - according stability test standard (A/B)*
-------
1500150015001300
C 150 HVersion HI
(B)
C 150 H/Hx4
(A)
250025002300
-2200
------
C 250 H/Hx4(narrow axle)
(A)
2500250024002100230021001100
----
C 250 H/Hx4(wide axle)
(A)
2500250025002500250025002200
----
C 250 H/Hx4Version HI
(narrow axle)
(B)
200020002000
-1800
------
C 200H/Hx4(narrow axle)
(A)
2000200020001800200018001100
----
C 200 H/Hx4(wide axle)
(A)
2000200020001800200018001700
----
C 200 H/Hx4Version HI
(narrow axle)
(B)
ABCD
(narrow axle) E(wide axle) E
FGIJKL
MNOPQ
1990220215
-1305
-2550235010035
5003645390
17401000425010º
2020250215
-1305
-4000255010035
5003645390
17401000570010º
2050210310
1375152017702800260010040
6104240580
18501200470013º
2150250390
1375154018002800260013045
6154240580
18501200470013º
2150270390
1392154018004040290013045
6154240580
18501200630013º
C 150 H C 150 Hx4 C 200 H C 250 H C 250 H x4C 200 H x4
2050210310
1392152017704040290010040
6104240580
18501200630013º
DIMENSIONS(mm)
C 150 H/x4_1500KgC 200 H/x4_2000KgC 250 H/x4_2500Kg
For rough terrain use – Models H – ISO 22915-13For industrial use – Models HI – ISO 22915-2
