Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Thresholds & GasketingNational Guard Products
2009
08 71 00.17/NATBuy Line 3528
®
Symb
ols/
Lege
ndGa
sket
ing
for u
se w
ith D
oor C
loser
s
2
National Guard Products, Inc.
Symbols/Legend
10C
S
ESS
2 8 H 7
© NGP, Inc. 2009
www.ngp.com 1-800-647-7874 fax 1-800-255-7874 [email protected]
Solid aluminum 700 Series:* No break in seal* Head not drilled* Side sections are furnished with slotted holes
for adjustment * Comes with self drilling #8 (Tek type) screws.* Bracket or closer and/or hold open device to be
attached to frame through weatherstrip section.
10C S
Gasketing for use with Door Closers
neoprene
1 1/2"
1/4
"
3/16"
700NA neoprene700NB700NDKB700SA silicone700SB700SDKB
2 8 H 7
2 8 H 7
ADA COMPLIANT Barrier Free Thresholds meet the requirements of the AMERICANS WITH DISABILITIES ACTAccessibility Guidelines for Buildings and Facilities (ADAAG)-September 2002, and ICC/ANSI A117.1-2003 Accessibleand Usable Building and Facilities.
UL10B and CAN4-S104-80M CLASSIFIED, complies with NFPA 80 and NFPA 252 for application toSteel fire doors rated up to 3 Hrs., and Wood type fire doors rated up to 1 1/2 hrs. (Rating on someitems vary and are noted.)
POSITIVE PRESSURE UL10C CLASSIFIED, Category ‘J’ listed. Complies with IBC, UBC7-2 (1997), NFPA 80 and NFPA 252 for application to Positive Pressure Steel fire doors rated up to 3 Hrs., and Wood type Fire doors rated up to 1-1/2 Hrs. (Ratings on some items vary and are noted.)
NGP-EDGE® SEALING SYSTEM, Category ‘G’ listed. REQUIRED for Category B listed wood type fire doors to meet
positive pressure requirements complying with IBC, UBC7-2 (1997) Part 1 and NFPA 252. See individual products for maximum door size and ratings.
SMOKE & DRAFT CONTROL GASKETING, Category ‘H’ listed, Complies with IBC, UBC7-2 (1997) Part 2, UL1784, NFPA 105 for use on all ‘S’ labeled Positive Pressure door assemblies.
ACOUSTICAL TESTED to ASTM E90 and ASTM E413, by Riverbank Acoustical Laboratories in Geneva, IL.
AIR INFILTRATION TESTED to ASTM E283. Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls and Doors.
SLIP-RESISTANT NGP ‘SIA’ (Slick-it-Ain’t) textured surface is available on all thresholds. Our process embeds andfuses bits of hot nickel and titanium into the surface of the threshold. This technology originally developed for useon aircraft carrier decks is very skid resistant and will not wear off.
ANSI/BHMA CERTIFIED. Certified thresholds comply with A156.21-2006, certified gasketing complies with A156.22-2005, and are listed in the BHMA Certified Products Directory.
Online product listings: www.ul.com/database
2 8 H 7
C L A S S I F I E D
2 8 H 7
2009 Sweets threshold
Silicone
3
Edge Sealing Systems
5050B Brown5050C Charcoal5050W White5050T Tan5050CL Clear17’, 20’, 21’, 25’, 300’
1/2"
1/4"HEAD &
LATCH SIDE
DOORJAMB
HINGE SIDE
DOORJAMB
1/16"
1/1
6"
10C S
9850B Brown9850C Charcoal9850W White36”, 48”, 84”, 96”, 108”
1/2"
3/16"
ESS
NGP-Edge® sealing system on 20 minute rated woodtype doors with steel frames up to 4’0”x 8’0” single,8’0” x 8’0” std. pair with 9550 at meeting edge.
2525B Brown2525C Charcoal2525W White2525T Tan17’, 20’. 21’, 25’ 300’
1/4"
3/8"
1/2"
3/4"
1 9/16"
3/16"
Intumescent Door Edge
10C S
10C S ESS
NGP-Edge® sealing system on 20, 45, 60, 90 minute ratedwood type doors up to 4’0”x 9’0” single, 8’0” x 9’0” pairs with9550 at meeting edge.
10C ESS
10C ESS
NGP-Edge® sealing system on 20, 45, 60, 90 minute rated woodtype doors up to 4’0”x 9’0” single, 8’0” x 9’0” std. or double-egress pairs when used at perimeter and 9550 at meeting edge.
10C SHEAD &
LATCH SIDE
DOORJAMB
HINGE SIDE
DOORJAMB
9550 (Gray)9550DKB (Brown)36”, 48”, 84”, 96”, 108”
5020B Brown5020C Charcoal5020W White36”, 48”, 84”, 96”, 108”
9450B Brown9450C Charcoal9450W White36”, 48”, 84”, 96”, 108”
Smoke and Draft Control Gasketing - Category ‘H’ Listed
7/8"
nylon +
1/2"
9600A9600B9600DKB
5/8" 3/8"
epdm
115NA115NB115NDKB
Silicone
TPE with Intumescent
08 71 00.17/NATBuy Line 3528
NGP-Edge® sealing system on 20, 45, 60, 90 minute rated woodtype doors up to 4’0”x 9’0” single, 8’0” x 9’0” pairs when usedat perimeter and meeting edge.
National Guard Products, Inc.
www.ngp.com 1-800-647-7874 fax 1-800-255-7874 [email protected]
Edge Sealing Systems and Smoke and Draft Control Gasketing (Adhesive Mount)Category ‘G’ and ‘H’ Listed
S
10C S
10C S
S
17’, 20’, 25’, 300’
1/2"
5/16"
5040B Brown5040W White
HEAD &LATCH SIDE
DOOR
JAMB
HINGE SIDE
JAMB
10C S
Silicone
5/16"
1/2"
5060B Brown5060CL Clear 7’, 8’, 9’, 17’, and 21’ rolls.
10C S
HEAD &LATCH SIDE
DOORJAMB
HINGE SIDE
DOORJAMB
(optional astragal
application)
Smoke Seals
silicone
7/16"
7/16"
TPE
4
Astragals
3/16"
neoprene
9/16"
3/16"
neoprene110NA 110NB110NDKB
3/16"
neoprene
1/4"7/8"
neoprene120NA 120NB120NDKB
Aluminum Housing:A = Clear B = Gold DKB = Dark bronze
*All perimeter seals this page except vinyl. 10C S
1/4
"
neoprene
3/16"7/8"
vinyl160V160VA 160VB160VDKB
5/1
6"
3/8"
neoprene
7/8"
neoprene137NA 137NB137NDKB
5/8"
3/16" 1/4
"
vinyl
3/16"
vinyl152V 152VB152VDKB
3/4"
nylonbrush
7/16"
A626AA626BA626DKB
Perim
eter
Sea
ls
silicone110SA 110SB110SDKB
silicone120SA 120SB120SDKB
silicone137SA 137SB137SDKB
1"
7/16"
7/16"
675A675B675DKB
nylon brush
10C
149MA149MB149MDKB
Order as set to receive two pieces
1 3/8"
3/4
"1/4
"
1/8"
158NA neoprene158NDKB neoprene
158SA silicone158SDKB silicone
158VA vinyl158VDKB vinyl Maximum Height 120”
Astra
gals
Order as set to receive two pieces
Perimeter Seals
National Guard Products, Inc.
www.ngp.com 1-800-647-7874 fax 1-800-255-7874 [email protected]
gray vinyl
1 1/8"
magnetic strip
1/8"-1/4"
5/8
"
96" MAXIMUM HEIGHT
silicone152S 152SB152SDKB
1 1/4" 1/4"Adjusting Range
13/1
6"
neoprene103NA103NB103NDKB
1/2
"
1 1/4" 1/4"
Adjusting Range
silicone
neoprene107NA107NB107NDKB
silicone107SA107SB107SDKB
10C S
10C S
Adjustable Perimeter Seals
silicone160S160SA 160SB160SDKB
* * *
08 71 00.17/NATBuy Line 3528
Door Sweeps and Shoes
19/32"
1"Max.Drop
2 1
/4"
neoprene220NA220NB220NDKB
silicone220SA220SB220SDKB
nylon brush220WHA220WHB220WHDKB
Use with a threshold for maximum sealing capability. Nylon brush recommended for carpet applications where no threshold is provided.
2 5
/16"
15/16"
7/8"Max.Drop
HEAVY DUTY
All productsthis page:
10C
1 1/2"
1/8"
3/4
"
1/2"Max.Drop
320Vvinyl
Hollow Metal Doors
Fits 1 5/8” x 3/4” channel. May be field cut (up to4”) in length. A “furring strip” may be used to lowerthis automatic door bottom when a deeper channel isused.
Door Bottoms available from 24” - 48” in length.Fire ratings apply to metal doors only.
1 1
7/3
2"
7/8"
Mortise required 15/16" x 1 5/8"
3/4" Max.
Drop
423N neoprene
Tested to 1,000,000 cycles
Available from 12” to 48” in length
320Nneoprene
320S silicone
National Guard Products, Inc.
www.ngp.com 1-800-647-7874 fax 1-800-255-7874 [email protected]
1 7
/16"
9/1
6"
nylon brush
C627AC627BC627DKB
1/2
"
vinyl
1 1
/2"
101VA101VB101VDKB
1"
neoprene
1 1
/4"
199NA199NB199NDKB
3/4
"1 1
/4"
vinyl
1025VA1025VB1025VDKB
7/1
6"
neoprene
1 1
/4"
1/4
"
vinyl
3/4
"
1 3/4"
1/4
"
1/2
"
vinyl
1 3/4"
1 "
36VA36VDKB
1/2
"
vinyl
1 3/4"
1 "
319V319VA319VB319VDKB
Door Sweeps
Door Shoes
neoprene200NA200NB200NDKB
silicone200SA200SB200SDKB
5
Automatic Door Bottoms
35VA35VDKB
S
neoprene420NA 420NB420NDKB
Sadd
le Th
resho
lds
6
Typical Wall .125
1/4
"
Typical Wall .109
4"
1/2
"
Typical Wall .109
5"
1/2
"
* *
424E .60 lbs./ft.
424EDKB .60 lbs./ft.
**
VINYL FOOT SEAL used instead of caulking to
increase the weather
resistance of the threshold.
Specify on order
All thresholds this page. 10C
Threshold Width413, 413DKB, 413BR 4”513, 513DKB, 513BR 5”613, 613DKB, 613BR 6”713, 713DKB, 713BR 7”813, 813DKB, 813BR 8”913, 913DKB 9”1013, 1013DKB 10”Note: Flute pattern varies with width of threshold
Threshold Width425E, 425EDKB 5”426E, 426EDKB 6”427E, 427EDKB 7”428E, 428EDKB 8”429E, 429EDKB 9”430E, 430EDKB 10”Note: Flute pattern varies with width of threshold
• mill finish aluminum standard• DKB - aluminum dark bronze finish• BR - Architectural Bronze alloy CDA 385
Slip-Resistance SIA FinishAvailable for better traction and slip-resistance. Specify SIA finish.
Typical Wall .105
5"
1/2
"
1/4
"
896 .64 lbs./ft.
896DKB .64 lbs./ft.
5"
1/2"Typical Wall .0781/4"
950 .50 lbs./ft.
950DKB .50 lbs./ft.
ADA Compliant Bumper Seal Thresholds
ADA
Comp
liant
Bum
per T
hres
holds
National Guard Products, Inc.
www.ngp.com 1-800-647-7874 fax 1-800-255-7874 [email protected]
Saddle Thresholds
*
*
Bumper Seal
*
Seals against the door
providing weather resistance
Vinyl ("V") supplied
unless other material
is specified
Options:
Neoprene ("N")
Silicone ("S")
Pile ("P")
**Pile insert
08 71 00.17/NATBuy Line 3528
7
Half Saddle, Offset, Thermal Barrier & Stainless Steel Thresholds
4"
Typical Wall .250
1/2
"
324 1.20 lbs./ft.
324DKB 1.20 lbs./ft.
5"
1/2"
Typical Wall .250325 1.32 lbs./ft.
325DKB 1.32 lbs./ft.
when installed where the non-beveled edge is FLUSH with flooring orwhere no greater than 1/4” vertical rise occurs.
*
*
*
Typical Wall .125
5 1/2"
1/2
"
1/4
"1/4
"653 .78 lbs./ft.
653DKB .78 lbs./ft.
7"
1/2
" 1/4
"
Typical Wall .125659 .89lbs./ft.
659DKB .89 lbs./ft.
4"1/2
"
Typical Wall .110
Threshold Width8424, 8424DKB, 8424BR 4”8425, 8425DKB, 8425BR 5”8426, 8426DKB, 8426BR 6”8427, 8427DKB, 8427BR 7”8428, 8428DKB, 8428BR 8”8429, 8429DKB, 8429BR 9”8430, 8430DKB, 8430BR 10”Note: Flute pattern varies with width of threshold
Typical Wall .120
1/4"
5"
513SS 2.07 lbs./ft.RCE Available
Typical Wall .120
1/2
"
5"
512SS 2.07 lbs./ft.RCE Available
Available in 4” to 10” width. 1st digit = width (ie: 4” = 413SS)
Available in 4” to 10” width. 1st digit = width (ie: 4” = 412SS)
Half Saddle Thresholds
Stainless Steel Saddle Thresholds #304 mill finish standardAvailable: Polished(US32)Brushed (US32D)
10C
10C
10C
10C
10C
10C
Offset Saddle Thresholds
National Guard Products, Inc.
www.ngp.com 1-800-647-7874 fax 1-800-255-7874 [email protected]
Thermal Barrier Thresholds
8
ADA
Comp
liant
Ram
psCo
ver P
lates
www.ngp.com 1-800-647-7874 fax 1-800-255-7874 [email protected]
Slope = 1:12All items this page10C
Ramp Height WidthR50, R50DKB 1/2” 6”R75, R75DKB 3/4” 9”R100, R100DKB 1” 12”R125, R125DKB 1 1/4” 15”R150, R150DKB 1 1/2” 18”R175, R175DKB 1 3/4” 21”R200, R200DKB 2” 24”R225, R225DKB 2 1/4” 27”R250, R250DKB 2 1/2” 30”
Ramp Height Width (w) of ramp from offsetRO50, RO50DKB 1/2” 6”RO75, RO75DKB 3/4” 9”RO100, RO100DKB 1” 12”RO125, RO125DKB 1 1/4” 15”RO150, RO150DKB 1 1/2” 18”RO175, RO175DKB 1 3/4” 21”RO200, RO200DKB 2” 24”RO225, RO225DKB 2 1/4” 27”RO250, RO250DKB 2 1/2” 30”
1/4"
3/4" Offset
left hand returnillustrated
Return Closed Ends for Ramps
6”
RCE-9, RCE-9DKB 9”RCE-15, RCE-15DKB 15”RCE-21, RCE-21DKB 21”RCE-30, RCE-30-DKB 30”
National Guard Products, Inc.
(w)
814 Aluminum814SS
48" Maximum
1/8"
818 Aluminum818BR818SS
48" Maximum
3/8"
838 Aluminum
Cover Plates
Minimum width 4”, Maximum width 48”, Maximum length 144”
Minimum width 2”, Maximum width 48”, Maximum length 144”
48" Maximum
1/4"
10C
10C
10C
Brass - Max width 36”, length 96”Stainless steel standard with square edges, beveling available
Stainless steel standard with square edges, beveling available, min. width 4”, max width 36”, length 96”
Minimum width 3”,Maximum width 48”, Maximum length 144”
Ramps • mill finish aluminum standard• DKB - aluminum dark bronze finish
Slip-Resistant SIA FinishAll ramps are available with our slip-resistant surface for better traction. Specify “SIA” finish.