50405 Patricia Street in Chesterfield, Michigan 48051 Inspection: Day prior to auction from 9AM - 4PM

BURTEK ENTERPRISES INC.eet in Chesterfield, Michigan 48051 Inspection: Day prior to auctio

WEDNESDAY, APRIL 26th at 9AM EDT

160

,00

0 S

F C

NC

MA

CH

ININ

G &

FA

BR

ICA

TIO

N F

AC

ILIT

Y

513.738.3311 www.myronbowling.com o224.927.5300 www.pplaucti n.com

160,000 SF CNC MACHINING & FABRICATION FACILITY

PUBLIC AUCTION

BURTEK ENTERPRISES INC.BURTEK ENTERPRISES INC.WEDNESDAY, APRIL 26TH AT 9AM EDT

50405 Patricia Street in Chesterfield, Michigan 48051

BURTEK ENTERPRISES, INC.

COMPLETE LIQUIDATION

BURTEKENTERPRISES, INC.

50405 Patricia Street in Chesterfield, Michigan

WEDNESDAY, APRIL 26thSTARTING AT 9AM EDT

Inspection: Day prior to auction from 9AM - 4PM

Bid Online in Real Time atUNABLE TO ATTEND?

1. Register at www.BidSpotter.com2. Mail a deposit check in the amount of 25% of your anticipated purchases to: Myron Bowling Auctioneers • P O Box 369 • Ross, Ohio 45061. For overnight delivery Service: 3901 Krause Ln • Hamilton, OH 45014 • If You Need Assistance Call 513-738-3311.

ALL ONLINE BIDS ARE SUBJECT TO A 18% BUYERS PREMIUM

SCANWITH YOURPHONE TO

LINK TO OURWEBSITE.

AUCTION TERMS OF SALETERMS OF SALE: Copies of “Terms of Sale” will be posted throughout the auction premises or can be obtained by request at 513-738-3311. Additional terms may be announced during the auction. Each item sells to the highest bidder “As Is, Where Is, With All Faults” without any representation or warranties expressed or implied by Myron Bowling Auctioneers, Inc. or other person.VERIFY DESCRIPTIONS: Although all information has been obtained from sources deemed reliable, the auctioneer and seller cannot guarantee the accuracy of all descriptions in our auction brochures, lot catalog or sale web pages. Bidders must take responsibility to thoroughly inspect the items on which they intend to bid prior to the auction.

15% BUYER'S PREMIUM ONSITE • 18% BUYER'S PREMIUM ONLINE WITH BIDSPOTTERINSPECTION THE DAY BEFORE THE AUCTION FROM 9AM TO 4PM

REMOVAL & PAYMENT: Removal and Rigging is the responsibility of the buyer. Anyone, Rigger or Successful Bidder, using a powered vehicle must have a Certificate of Insurance. All removal begins at the conclusion of the auction and after payment in full by either cash, wire transfer, company check (if approved by auction company or bank guaranteed check). All checks should be made payable to Myron Bowling Auctioneers. Taxes will be charged unless you have the proper written exemption from your state with you at the timeof purchase. Payment will be made in US dollars only.SAMPLE BANK LETTER: This bank, the (Bank Name) will guarantee payment in full to Myron Bowling Auctioneers. This guarantee will be in effect for purchases made at the (Name of) Auction in (City), (State) on (Month, Date).

COMPLETE TERMS OF SALE CAN BE FOUND AT www.myronbowling.com • Call 513-738-3311 if you have any questions.

Myron B owling A uctioneers Inc.P.O. BOX 369 • ROSS, OHIO 45061

PRE-SORTFIRST CLASSU.S. POSTAGE

PAIDCINCINNATI, OHIOPERMIT NO. 5714

513.738.3311 www.myronbowling.com 224.927.5300 www.pplaucti n.coo m

LODGING

DIRECTIONSFrom Detroit: Take 1-94E to exit 241 and turn left onto 21 Mile Road. Turn right onto M-3N. Go 1.8 mi and turn left onto Chesterfield Rd. Turn Left on to Patricia St.

Holiday Inn Express Chesterfield - (586) 598-4000 45805 Marketplace Blvd. 48051Hampton Inn & Suites - (586) 948-230045725 Marketplace Blvd. 48051

SNK 3 Plus 2-Axis Double Column CNC Vertical Machining Center

(3) HAAS VF-8/50 & VF-7/40 CNC Vertical Machining Centers FPT 5” CNC 5-Axis Table Type Horizontal Boring Mill

(2) FLOW CNC Waterjet Shape Cutters(10) Forklifts to7,600-lb. Capacity

CUMMINS 100kw Trailer Diesel Generator

(50+) 450 & 350 AMP MIG Welders & Power Supplies

300,000-lbs. Steel Plate & 100,000-lbs.Assorted Steel & Aluminum Stock Inventory

2011 ACCURSHEAR Hydraulic Squaring ShearHAAS SL30T CNC Turning Center

(2) ACCURPRESS 250-Ton & 60-Ton CNC Hydraulic Press Brakes

New as2015

20072004 1 OF 2

1 OF 2

2

SNK 3 Plus 2-Axis Double Column CNC Vertical Machining Center

HAAS VF-8/50 CNC Vertical Machining Center

DYNAPATH DMC-3E320 CNC Vertical Machining Center

(2) HAAS VF-7/40 CNC Vertical Machining Centers

FADAL 906-1-VMC 4020 CNC Vertical Machining Center

HAAS SL30T CNC Turning Center

BURTEK ENTERPRISES INC. • 50405 Patricia Street in Chesterfield, MI 48051

CNC VERTICAL MACHINING CENTERS

2004 SNK 3 Plus 2-Axis Double Column CNC VMC, Model RB-6VM/CS, S/N 452438, 118” x 238” 66,000 lb. Work Table, 130” Between Housings, 6,000 RPM, 50 Taper Spindle, 80-Posi-tion ATC, Travels: X-248”, Y-150”, Z-62.222”, Coolant, Chip Conveyors, Fanuc Series 16i-MB CNC Control2015 HAAS VF-8/50 CNC VMC, S/N 1121177, 7,500 RPM, 2-Speed Gear Drive, 50 Taper Spindle, (2) 60” x 36” Pallets w/Midaco Series A60SD Pallet Changer, Travels: X-64”, Y-40”, Z-30”, 30-Position ATC, 4,000 lb. Max. Load,

Linear Scales, Coolant, Chip Conveyor, Haas CNC Control(2) HAAS VF-7/40 CNC VMCs, S/Ns 1084013 (2011) & 1065488 (2008), 10,000 RPM, 40 Taper Spindle, 40-Po-sition ATC, 28” x 84” Table, Travels: X-84”, Y-32”, Z-30”, 30-HP 2-Speed Gear Drive, Linear Scales, Coolant thru Spindle, Chip Auger, Haas CNC Control1995 FADAL 906-1-VMC 4020 CNC VMC, S/N 9511196, 10,000 RPM, 20” x 48” Table, Travels: X-40”, Y-20”, Z-20”, 21-Position ATC, Coolant, Fadal CNC 88HS ControlDYNAPATH DMC-3E320 CNC VMC, S/N 135, 6,000 RPM, CAT 40 Spindle, 16” x 40” Table, Travels: X-34”, Y-20”,

Z-24”, 16-Position ATC, Coolant, Dy-napath Conversational Graphics CNC ControlLarge Assortment 50 Taper & 40 Taper Tooling & Storage Carts • (4) 24” x 72” x 21.5” High T-Slot Steel Sub-Tables • 12” x 20” x 48” High T-Slot Angle Plate • KURT Machine Vises

CNC TURNING CENTER1999 HAAS SL30T CNC Turning Center, S/N 62141, 10” 3-Jaw Chuck, 12-Position Turret, Tailstock, Tool Eye, Chip Auger, Coolant, Haas CNC Control

CNC PRESS BRAKES2007 ACCURPRESS 250-Ton CNC Hydraulic Press Brake, Model 725012, S/N 9481, 12’ Overarm, 125” Between Housings, 10.25” Throat, ETS 3000 Gauge/Ram/Bed Control2007 ACCURPRESS 60-Ton Advan-tage CNC Hydraulic Press Brake, Model 7606/8, S/N 9570, 8’ Overall (100” w/Left Horn), 54.5” Between Housings, 8.25” Throat, Accurpress ETS ControlLarge Assortment Wila & Standard Brake Dies to 10’ Length

2004

1 OF 2

2015

New as2011

3 3

WEDNESDAY, APRIL 26th at 9AM EDT • Inspection: Day prior to auction from 9AM-4PM

ACCURPRESS 250-Ton CNC Hydraulic Press Brake

FPT 5” CNC 5-Axis Table Type Horizontal Boring Mill

ACCURPRESS 60-Ton Advantage CNC Hydraulic Press Brake

(2) FLOW 6’ x 12’ Integrated Flexing Bridge CNC Waterjet Shape Cutters

GEKA Hydracrop 50A Hydraulic Ironworker

ACCURSHEAR 10’ x .250” Hydraulic Squaring Shear

MP TECH Shot Blast System LUCAS 4” CNC Table Type CNC Horizontal Boring

CNC WATER JET SHAPE CUTTERS

(2) 2006 FLOW 6’ x 12’ Integrated Flexing Bridge CNC Waterjet Shape Cutters, Model 6012, S/Ns 370723, 26828U, 84” x 156” Tank Size, Flow 50-HP Pump w/60,000 PSI Intensifier, Phaser Mac 3 Cutting Head w/Vacuum Assist, Ebbco Final Filtration System, Common Ebbco Chiller & Main Filtra-tion System, Flow ControlWater Jet Spare Repair Parts

Assorted Drilled & Tapped Angle Plates

CNC HORIZONTAL BORING MILLS

1995 FPT 5” CNC 5-Axis Table Type Horizontal Boring Mill, Model LEM937/L, S/N 93795050, 3,000 RPM, 50 Taper Spindle, 36-HP Spindle Drive, 49” x 157.5” Work Table, Travels: X-138”, Y-88”, Z-47”, Coolant, Universal Right Angle Head, Spindle Extension, Fidia C10 CNC ControlLUCAS 4” CNC Table Type CNC Hor-izontal Boring Mill, Model 20DCS55, S/N 20DC0605, 1,500 RPM, 48” x 48” Rotary Work Table, Travels: X-72”, Y-60”, Z-47.5”, Hydraulic Power Unit, Coolant, Heidenhain CNC Control

SHEAR2011 ACCURSHEAR 10’ x .250” Hydraulic Squaring Shear, Model 625010, 69” Left Squaring Arm w/Stops, (2) 48” Front Supports, Top-Mounted Hydraulics w/Cooler, Accurs-hear Programmable Gauge Control

SHOT BLAST SYSTEMMP TECH Shot Blast System w/Double Door Blast Cabinet, 25-HP Shot Wheel, (2) Monorail Spinner Hangers, Loading Jib, Shot Recovery w/Elevator & Hopper, Pulse Jet Dust Collector, Platform, New 2008

IRONWORKERGEKA Hydracrop 50A Hydraulic Ironworker, Notching, Bar/Angle/Plate Shearing, Punching w/Assorted Tooling

2007 2007

2006

2008

2011

5-Axis CNC

1 OF 2

UNABLE TO ATTEND?

Bid Online in Real Time

4

(2) CALDWELL GROUP Posi-Turner 20,000-lb. Crane Hook Weldment Rollovers

DEVLIEG 43H-96 Spiramatic Jigmil

HYD-MECH 18” Programmable Mitering Vertical Band Saw

DORIAN TOOL Accu-Set Plus Digital Tool Pre-Setter

CLAUSING 20”Drill Press

FARO Arm Platinum 12’’ CMM

UNITED LCH-150KN Bench Top Digital Tensile Tester

FARO Arm Fusion6’’ CMM

(3) BRIDGEPORT 1.5-HP & 1-HP Vertical Mills

Assorted Granite Surface Plates

FARO #1 & LEICA GEO SYSTEMS Laser Trackers

Large Assortment of Inspection Equipment

Custom Traveling Frame & Ram Hydraulic Straightening Press

DEVLIEG 3B-48 Spiramatic Jigmil

(2) W.F. WELLS 8” x 18” 2-Post Horizontal Band Saws

LEBLOND 17” x 58” Geared Head Engine Lathe

DEVLIEG 30” x 40” Rotary Table

ACER Vertical Mill

BURTEK ENTERPRISES INC. • 50405 Patricia Street in Chesterfield, MI 48051

1 OF 2

1 OF 2

2010 2007

1 OF 2

2 OF 3

3 5

ROLLOVERS(2) CALDWELL GROUP Posi-Turner 20,000 lb. Electric Crane Hook Weld-ment Rollovers, Model 2-0-40

STRAIGHTENING PRESSCustom Traveling Frame & Ram Hydraulic Straightening Press, 108” x 192” Bed, 112” Between Housings of Traveling Frame, 38” Max. Daylight, Hydraulics w/Heat Exchanger

TOOLROOM EQUIPMENTLEBLOND 17” x 58” Geared Head Engine Lathe, 1,000 RPM, 16” 3-Jaw Chuck, Carriage w/Cross Slide, Taper, Threading, Tailstock, Coolant, Pan BedDEVLIEG 43H-96 Spiramatic Jigmil, 26-1,220 RPM, 35” x 96” Work Table, Coolant, Sony DRODEVLIEG 3B-48 Spiramatic Jigmil, 25-1,200 RPM, 30” x 48” Work Table, Coolant, Acu-Rite DRODEVLIEG 30” x 40” Rotary Table • DEVLIEG Angle Plate SetHYD-MECH 18” Programmable Au-tomatic Mitering Vertical Band Saw, Model V18APC Series II, Power Feed & Clamping, 40” (est.) Power Stroke, Roller Feed Table, Coolant, E600 Pro-grammable Controller(2) W.F. WELLS 8” x 18” 2-Post Horizontal Band Saws, Model W-9-1, Coolant, Roller Feed Table1997 IMAC 8” x 8” Hydraulic Notcher,

Model FA200/6, 6mm Max. Capacity, 25” x 27” Work TableACER Vertical Mill, Model E-Mill EVS-3VK, 10” x 50” Power Feed Work Table, Power Draw Bar, Newall DP7000 DROBRIDGEPORT 1.5-HP Vertical Mill, 9” x 42” Power Feed Work Table, Newall DROBRIDGEPORT 1-HP Vertical Mill, 9” x 36” Power Feed Work Table, DROBRIDGEPORT 1-HP Vertical Mill, 9” x 42” Power Feed Work Table, Newall DROCLAUSING 20” Drill Press, Crank Adjustable Oil Groove TableELLIS 18” Drill Press

INSPECTIONEQUIPMENT

(2) FARO Arm Platinum 12’ & 6’ CMMs w/Computer & Stand, 2010, 2004FARO #1 & LEICA GEO SYSTEMS Laser Trackers, New 2007DORIAN TOOL Accu-Set Plus Digital Tool Pre-SetterSPI Hardness TesterUNITED LCH-150KN Bench Top Digi-tal Tensile Tester w/Granite TableGranite Surface Plates, 84” x 144”, 48” x 96”, 48” x 72” & 75” x 119”Inspection Equipment: Thread Gaug-es, Radius Gauges, Ring Gauges, Micrometers, Calipers, Gauge Blocks, V-Blocks, Pin Gauges, Height Gauges, Brunson Gauge, Multi-Drawer Cabinets

WELDING RELATED2009 FANUC 6-Axis CNC Robot Welding Cell w/Fanuc 100iBS6 Robot, S/N E03900225, Fanuc R-J3iB Control, Lincoln 455M 450 AMP Power Supply, Miller Coolmate Radiator (not installed & operating)2006 FANUC 6-Axis CNC Robot Welding Cell w/Acramate 100iBC Robot, S/N E6605992, Fanuc R-J3iC Pendant, Lincoln 455M 450 AMP Power Supply, Fixture, Light Curtain (not installed & operating)ARONSON 120,000-lb. Welding Posi-tioner, Model HD100A, S/N 82470, 60” x 60” PlatenSCIAKY 2,500-lb. Welding Posi-tioner, Model WP-1, S/N 10628, 40” Dia. PlatenMILLER Spectrum 1251 DC Plasma Cutter(19) Assorted DIVERSI-TECH FRED Wall-Mounted Welding Fume Col-lectors(2) DIVERSI-TECH FRED Portable Welding Fume CollectorsMILLER UA1000 1000 AMP Stud WelderLINCOLN DC600 CV/CC 600 AMP Arc Welder(50+) 450 AMP & 350 AMP MIG Weld-ers & Power Supplies(3) MILLER TIG Runner TIG Welders(2) MILLER CoolMate 4 Radiators(2) 8” Bench Top Rotary Welding Positioners

Heavy Duty Welding Tables • Weld-ing/Clamping Jigs • (20) Canvas Welding Curtains • New Welding Rod & Wire • Welding Clamps • (6) Assorted Acetylene Torch Carts

PAINT EQUIPMENTGENERAL FABRICATIONS CORP. Gas Fired Paint Bake Oven, S/N 88-5823, 18’ x 30’ x 12’ (est.) Interior Dimensions, Double Sliding Doors at Each End12’ x 60’ x 14’ High (est.) Paint Booth, Double Swing Doors, 2-Chamber w/Dividing Doors, Explosion Proof Lights, Rack Lift, (4) Fans in Stacks, (3) Man Doors, ControlsHARBIL Paint Conditioner, (4) 1-Gal-lon CapacityLarge Assortment Heavy Duty Paint Booth Dollies, Stands & Racks • New Paint, Supplies, Pressure Tanks, Guns

WEDNESDAY, APRIL 26th at 9AM EDT • Inspection: Day prior to auction from 9AM-4PM

ARONSON 120,000-lb. Welding Positioner

(50+) 450 AMP & 350 AMP MIG Welders & Power Supplies

12’ x 60’ x 14’ High (est.) Paint Booth

(2) FANUC 6-Axis CNC Robot Welding Cells, New as 2009

(19) Assorted DIVERSI-TECH FRED Fume Collectors

GENERAL FABRICATIONS CORP.Paint Bake Oven

SCIAKY 2,500-lb. Welding Positioner

(2) BCT Level-Tite Drilled &Tapped Steel Layout Tables

MILLER UA1000 1000 AMP Stud Welder

(2) T-Slot 2-Piece Steel Layout Tables

New as2009

1 OF 2

2 OF 19

6

300,000-lbs. Steel Plate & 100,000-lbs. Assorted Steel & Aluminum Stock Inventory

BURTEK ENTERPRISES INC. • 50405 Patricia Street in Chesterfield, Mi 48051

LIFTS & MATERIAL HANDLING

(2) SKYJACK 19’ Electric Manlifts, Model SJ III 3219, 500-lb. Capacity, 25” x 80” Platform w/Slide-out, On-Board ChargerJLG Electric Manlift, Model E300AJP, 500-lb. Capacity, 27” x 45” Platform, On-Board Charger(10) CATERPILLAR, DAEWOO, TOYOTA, MITSUBISHI & YALE LP Forklifts to 7,600-lb. Capacity, Solid & Pneumatic Tires, 2- & 3-Stage Mast, Side Shift, New as 2009HYDROSCALE Weigh Master 50,000-lb. x 10-lb. Crane Hook Digital Scale

PITTSBURGH 2-Ton Bolt Together Adj. Portable Gantry w/2-Ton Chain HoistHANDLING SYSTEMS 1/2-Ton x 18’ 360° Free-Standing Jib CraneCertified 4-Leg Lifting Chains, Slings, Shackles & Eye Bolts(6) Assorted 20’ Cargo Containers • Self-Dumping Hoppers48” x 96” Electric Material Scissor Lift TableApprox. (50) Sections 48” x 144” x 15’ (est.) Heavy Duty Adj. Pallet Rack to 5-Tier, w/Wire Shelf InsertsHeavy Duty Double-Sided Cantilever Material Storage Racks: (3) 120”W / 6-Tier & (6) 60”W / 5-Tier

TRUCKS2005 FORD F-250 XL Super Duty Pickup Truck2002 CHEVROLET Duramax 4500 18’ S/A Flatbed Truck, Diesel2002 AMG Hummer H-1 AWD Pickup Truck, Diesel (no title)

MATERIAL INVENTORY300,000-lbs. Steel Plate50,000-lbs. Assorted Steel Stock50,000-lbs. Assorted Aluminum StockAssorted Yard Scrap Material

MISCELLANEOUS2008 CUMMINS 750kw Diesel Stand-by Generator, Model 100DGBB, Fuel Tank BaseCUMMINS 100kw Trailer Diesel Gen-erator, Model 100DGDB-149, Spec. M Power Command Control(3) SULLAIR 50-HP Rotary Air Com-pressors, Models 3709V/A, LS120-50L/SA & 3709VA(3) ZEKS & SULLAIR Refrigerated Air Dryers(2) Vertical Air Receiver TankSTRATASYS DIMENSION SST1200ES 3D Printer w/Model SCA-1200 Support Removal System(3) TRINCO Reach-in Blast Cabinets,

HYDROSCALE Weigh Master Crane Hook Digital Scale

(10) CAT, TOYOTA, DAEWOO, MITSUBISHI & YALE Forklifts to 7,600-lb. Capacity, New as 2009

AMG Hummer H-1 AWD Pickup TruckCHEVROLET Duramax 4500 Flatbed Truck

JLG E300AJP Electric Manlift(2) SKYJACK SJ III 19’ Electric Manlifts

1 OF 2 2002 2002

3 OF 10

Stainless Steel

New as2009

3 7

WEDNESDAY, APRIL 26th at 9AM EDT • Inspection: Day prior to auction from 9AM-4PM

4-Hole - Model 96X48ST/PC-1 • 2-Hole - Model 48X36/BP • 2-Hole Model 60X60NST/PCEVISA CHP-12G Plate BevelerRIDGID WD460 Tri-StandFONG HO 14” Mitering Cold Saw(2) Flex Arm Bench Mounted Pneu-matic TappersDURA FORCE 25-Ton H-Frame Adj. Bed Hydraulic Shop PressKALAMAZOO 4” x 10” Combination Disc/Belt SanderPOWERMATIC 20” Disc Sander, Model CS-20-03GREENLEE Tugger Hydraulic Cable Puller, Model 640(5) Assorted Digigraph Stencil Cut-ters

(2) Assorted Electric Core DrillsALCATEL Vacuum Chuck w/Pump(2) BCT Level-Tite 125” x 126” & 125” x 23’ Drilled & Tapped Steel Layout Table, Stress-ite Base(2) 144” x 216” T-Slot 2-Piece Steel Layout Tables(8) Drilled & Tapped Heavy Duty Steel Layout Tables(2) 2008 BEND PAK HD-12X 12,000-lb. x 20’ Adj. Hydraulic Vehicle LiftsPULLMAN Holt 1500 Gloss Boss Floor PolisherNINJA MASTER Century 400 Carpet CleanerFLOOD MASTER Flood PumperTRANSCELL 5,000-lb. (est.) 48” x 48” Digital Floor Scale w/DRO

SHELTER LOGIC 15’ x 40’ x 15’ High (est.) Vinyl Storage Tent w/Support Frame(10) Assorted EAGLE Flammable Liquid Storage Cabinets to 110-Gal-lon(2) MINUTEMAN SC24/26P & TEN-NANT 7200 Electric Rider Floor Scrubbers(2) TROY BILT Storm 2840 28” & 5024 24” Self-Propelled Snow Blow-ersNORTH STAR / HONDA Hot Power WasherRubber-Tired Hay Wagon • Emergen-cy Switch Gear System • Assorted Dry Transformers • (2) Assorted Magnetic Base Drills

Ladders • Carts • Shelving • Trash Cans • Toolboxes • LISTA Cabinets • Jack Stands • Storage Racks & Cabi-nets • Pallet Jacks • Air Hose • Tote Pan Racks • Benches • Bench Vises • Hand Trucks• Shop Vacs

OFFICE FURNITURE(100+) Lots Late Model Executive Office Furniture, Cubicles, Desks, Chairs, File Cabinets, (10) Late Model Photo Copier/Fax Machines, Drawing Copier

(2) BEND PAK Hydraulic Vehicle Lifts(3) TRINCO Reach-in Blast CabinetsSTRATASYS DIMENSIONSST1200ES 3D Printer

(3) ZEKS & SULLAIR Refrigerated Air Dryers

(3) SULLAIR 50-HP Rotary Air Compressors

CUMMINS 100kw Trailer Diesel GeneratorCUMMINS 750kw Diesel Stand-by Generator

2008

2008

1 OF 3

1 OF 2

1 OF 3

(100+) Lots Late Model Executive Office FurnitureTo Be Sold Online Only • Bidding Ends: Thursday, April 27th at 11AM EDT

160,000 SF CNC MACHINING & FABRICATION FACILITY

PUBLIC AUCTION

BURTEK ENTERPRISES INC.BURTEK ENTERPRISES INC.WEDNESDAY, APRIL 26TH AT 9AM EDT

50405 Patricia Street in Chesterfield, Michigan 48051

BURTEK ENTERPRISES, INC.

COMPLETE LIQUIDATION

BURTEKENTERPRISES, INC.

50405 Patricia Street in Chesterfield, Michigan

WEDNESDAY, APRIL 26thSTARTING AT 9AM EDT

Inspection: Day prior to auction from 9AM - 4PM

Bid Online in Real Time atUNABLE TO ATTEND?

1. Register at www.BidSpotter.com2. Mail a deposit check in the amount of 25% of your anticipated purchases to: Myron Bowling Auctioneers • P O Box 369 • Ross, Ohio 45061. For overnight delivery Service: 3901 Krause Ln • Hamilton, OH 45014 • If You Need Assistance Call 513-738-3311.

ALL ONLINE BIDS ARE SUBJECT TO A 18% BUYERS PREMIUM

SCANWITH YOURPHONE TO

LINK TO OURWEBSITE.

AUCTION TERMS OF SALETERMS OF SALE: Copies of “Terms of Sale” will be posted throughout the auction premises or can be obtained by request at 513-738-3311. Additional terms may be announced during the auction. Each item sells to the highest bidder “As Is, Where Is, With All Faults” without any representation or warranties expressed or implied by Myron Bowling Auctioneers, Inc. or other person.VERIFY DESCRIPTIONS: Although all information has been obtained from sources deemed reliable, the auctioneer and seller cannot guarantee the accuracy of all descriptions in our auction brochures, lot catalog or sale web pages. Bidders must take responsibility to thoroughly inspect the items on which they intend to bid prior to the auction.

15% BUYER'S PREMIUM ONSITE • 18% BUYER'S PREMIUM ONLINE WITH BIDSPOTTERINSPECTION THE DAY BEFORE THE AUCTION FROM 9AM TO 4PM

REMOVAL & PAYMENT: Removal and Rigging is the responsibility of the buyer. Anyone, Rigger or Successful Bidder, using a powered vehicle must have a Certificate of Insurance. All removal begins at the conclusion of the auction and after payment in full by either cash, wire transfer, company check (if approved by auction company or bank guaranteed check). All checks should be made payable to Myron Bowling Auctioneers. Taxes will be charged unless you have the proper written exemption from your state with you at the timeof purchase. Payment will be made in US dollars only.SAMPLE BANK LETTER: This bank, the (Bank Name) will guarantee payment in full to Myron Bowling Auctioneers. This guarantee will be in effect for purchases made at the (Name of) Auction in (City), (State) on (Month, Date).

COMPLETE TERMS OF SALE CAN BE FOUND AT www.myronbowling.com • Call 513-738-3311 if you have any questions.

Myron B owling A uctioneers Inc.P.O. BOX 369 • ROSS, OHIO 45061

PRE-SORTFIRST CLASSU.S. POSTAGE

PAIDCINCINNATI, OHIOPERMIT NO. 5714

513.738.3311 www.myronbowling.com 224.927.5300 www.pplaucti n.coo m

LODGING

DIRECTIONSFrom Detroit: Take 1-94E to exit 241 and turn left onto 21 Mile Road. Turn right onto M-3N. Go 1.8 mi and turn left onto Chesterfield Rd. Turn Left on to Patricia St.

Holiday Inn Express Chesterfield - (586) 598-4000 45805 Marketplace Blvd. 48051Hampton Inn & Suites - (586) 948-230045725 Marketplace Blvd. 48051

(2) ACCURPRESS 250-Ton & 60-Ton CNC Hydraulic Press Brakes

(6) SNK, HAAS, FADAL & DYNAPATH CNC Vertical Machining Centers, New as 2015

FPT 5” CNC 5-Axis Table Type Horizontal Boring Mill

New as2015

1 OF 2 2007

1 OF 6