Build on the Momentum Portfolio overview - focus- · PDF fileThe Microsemi SyncServer S600/S650 Industry Leading Security, Accuracy, Reliability and Flexibility Security Accuracy Flexibility

© 2016 Microsemi Corporation. Company Proprietary 1

Build on the Momentum – Portfolio overview

Eran Gilat20/6/2017

Power Matters.TM 2© 2015 Microsemi Corporation. Company Proprietary

SyncServer Family


The New SyncServers

SyncServer S600

SyncServer S650Optional Timing I/O Modules


Advanced & Functional Design

Motherboard

Single or dual

power

supplies;

Hitless

switching

Rubidium and

OCXO upgrades

GNSS ModuleTwo module

slots,

(Timing I/O

Modules

installed)


Merging the best of Network and Timing in a single chassis• High accuracy & excellent holdover

• 4x GbE ports

– (all hardware time stamped enabled)

• Robust environmental specifications

• Software option upgrades leverage built in hardware

Innovative Features• Security-Hardened NTP Reflector

• FlexPort Technology

• NTP hardware time stamping

Best in class Time Server/GPS Instrument!

The Microsemi SyncServer S600/S650Industry Leading Security, Accuracy, Reliability and Flexibility

SecurityAccuracy

Flexibility


New standard features• NTP Broadcasting, Multicasting, Prefer

• Manual configuration of year, leap second notification, and UTC offset from TAI

New Security Protocol License Features• 3rd Party HTTPS Certificate Support

• NTP Reflector performance is now 360,000 pps

New FlexPort License features• 6 new input time codes

• 23 new output time codes

• BNC-BNC output phase adjustments

Added Features in Version 2.0

ALL customers will benefit from tighter security

Improved security for web GUI browsers!

Range Timing customers have greatly increased Timecode flexibility

All SyncServers

are hardware ready!


AGGREGATIONCORE

Microsemi Synchronization End to End PackeTime Portfolio for Telecom

ACCESS

100s to 1000s of

clients

Grandmaster

Central Office

TDM, PTP, Sync-E

8 to 128 clients

GM or BC

Indoor / Outdoor

TDM, PTP, Sync-E

Centralized

Grandmaster ClocksEdge Master Clocks

Indoor, Small Cell

mini-GM Clocks

4-8 Client mini-

GM Antenna,

Indoor

PTP, Sync-E

TimePictra End to End Synchronization Network Management

SSU 2000

IGM Family

TimeProvider® 2300

TimeProvider® 2700

TimeProvider® 5000

Embedded PTP

Slave and

Boundary Clocks

Embedded Clocks

eNodeBs

Small Cells

1588/SyncE

DPLL


TimeProvider 5000 update


► Key Features IEEE 1588 v2 support

Telecom/Default Profile

Optical and Electrical SFPs

GPS, GNSS , E1/T1 , 1PPS / TOD Inputs

E1/T1 10MHz/1pps Outputs

Dual -48VDC Power (Redundant)

Rubidium or Quartz Oscillators

Port and IOC Redundancy

Hardware Time Stamping for PTP and NTP

Up to 1000 Clients/Port (Unicast) @ max 128 Pkts/s

VLAN Support 1024 – IPv4 32 – IPv6

SNMP and CLI Management

► Value-added Features NTP license for Femto-cell application (maximum 120,000 request / sec)

Integration with TPE30 and TPE10 expansion shelves

TimeProvider 5000


TimeProvider 5000 Expansion Platform

1RU “Rack-and-Stack” with TimeProvider 5000 PTP GM• J.211/DTI daisy chain interface• Up to 10 expansion shelves,

any mix

Flexible, “NGN Building Blocks”• TimeProvider Expansion10: SyncE and PTP (L2 multicast)• TimeProvider Expansion30: E1 and 1PPS & TOD

TimeProvider5000

TPE10

TPE30


New IMC Cards with GNSS Support:• Single GNSS Input Card

– GPS only (standard mode)

– SW License to activate GLONASS and Galileo

• Dual GNSS Input card

– Input 1 GPS only

– Input 2 GNSS (as above)

• Both support expansion interface

– GPS plus GLONASS plus Galileo SW license

Reliability Advantages• Integrity: Backup constellations

• Continuity: More satellites in view

• Availability: e.g. Urban canyons

• Accuracy: e.g. Urban canyons

Will replace existing IMC cards

TP5000 Release 3.1 – Available Now


IPv6 Support• Both PTP and NTP (Management remains IPv4)

• SW license enabled

New PTP profiles:• ITU-T G.8275.2 Phase Profile on TP5k

• ITU-T G.8275.1 Phase Profile on TPe10

PTP probe mode active monitoring• Set thresholds and trigger event crossings

SW fixes and updates• Refer to SRN

TP5000 Release 3.1 - Continued


Integrated GrandMaster Overview


Expanded IGM Family HighlightsAddresses Indoor & Outdoor Deployment Models

IGM-1100i

(indoor)

IGM-1100o

(outdoor)

IGM-1100x

(external antenna)

• Increased PTP 1588

client capacity from

eight to 16 clients

• NEW! Support for

Telecom 2008 and

default 1588 profiles

• NEW! CLI over

SSH support

• Ruggedized for

extended temperatures

• Integrates PTP 1588

master and outdoor

GPS antenna

• PoE capability

simplifies rooftop

deployment vs. coax

• For scenarios with pre-

existing GPS antenna or

when indoor installation

is unviable

• Connects to existing

cable via simple

installation to telecom

cabinet or hut


PTP

PTP GM : G.8275.1, G.8265.1, Telecom-2008, ETH-Default, Default Profile, G.8275.2

PTP input for GNSS BackUp – G.8265.1, Telecom-2008, G.8275.1, G.8275.2

APTS, asymmetry Correction

4, 8, 16 & 32 clients with License Control

IPv6 (PTP traffic) – dual stack when IPv4 for Mgt

SyncE

SyncE Input & Output with ESMC support

1PPS test port

QoS

Up to 24 Vlans, 16 Vlans for PTP-GM.

DSCP

IGM Main Features


Management

CLI over SSHv2 consistent with portfolio (TP2K, TP5K)

TimePictra 10.6 FCAPS TR-69 collector:• Config and Status

• NE Status and Logical view, Client List, Heartbeat with NENA

• Upload of firmware to fit under TP10 firmware policy

• Configuration Policy

• ZTP – DHCP option 43 support

• Unit Reboot, under system Tab

• License in TP10 for IGM

• SNMP Alarm Reception

Commercial ACS option for stand-alone installations.

A-GNSS Proxy (co-exists with TP10.6)• Secure A-GNSS service by Microsemi

LLDP

IGM Main Features (Contd.)


IGM-1100o – Outdoor version

Integration

Ethernet cabling

Common Software

No A-GNSS

Operating -40C to +70C

GR-3108, GR-108, GR-63

PoE Indoor or Outdoor

Plug & Play, ZTP


IGM Outdoor (1100o) connected to indoor PoE enabled Switch or Midspan

Outdoor installations should take care of lighting protection system:• Primary surge protection device needed as

close as possible to inlet to building & connected to earth ground : PD-OUT/SP11

• Secondary surge protection in the 1 port PoE injector : PD-9001G-40/SP Midspan

IGM outdoor & PoE indoor

PD-9001G-40/SP PD-OUT/SP11


Enhanced Primary Reference Time Clock (ePRTC)


Frequency accuracy to 5 x 10-13

Long-term stability better than 1 x 10-14

Easy to use with automatic startup and intuitive menu structure

Proven Reliability

Robust Warranty

5071A – The world’s leading Cesium Standard

INDUSTRY LEADING PEFORMANCE

+

FIELD PROVEN PLATFORM


TimeSource Enhanced PRTC connection with SSU-2000 and TimeProvider 5000

TimeProvider® 5000 SSU-2000e

E1 or DS1

(frequency)

TOD (frequency, phase, time)

TOD

Distribution

E1 or DS1

(frequency)

NEW


TimeSource Enhanced PRTC

1. Exceeds all requirements for newly consented ITU-T G.8272.1 recommendation for an enhanced Primary Reference Time Clock (ePRTC)

2. A “source of time” that is not dependent on GNSS and therefore is not vulnerable to GNSS attacks and/or outages

Value Proposition


TimeSource Enhanced PRTC – block diagram

ePRTC engine (Ensemble and TimeScale)

Input Signal Selector

Cs Cs

Output Signal Generation

TOD 1pps TDM

TWTT

Tim

eSo

urc

eEn

han

ced

PR

TC

SmartGNSS Antenna

TimePictra

G.703 10 MHz

ePRTC System

Smart

GNSS

Antenna

Signal Outputs

(TOD, 1pps,

E1, DS1, etc.)

Local Atomic Clock

(single or dual)

Automatic Cable Delay

Compensation using

TWTT


ePRTC requirement : accuracy better than 30nS (we are showing 10nS)• Note : this performance is with “1 Standard Cesium”, using redundant / high performance

Cesiums, performance will be even better.

Example: TimeSource 3550 Performance

Diurnal estimator

evaluates a full day of

tracking data before

steering the oscillator


ePRTC Holdover Performance

•This slide shows the holdover performance for a complete ePRTC

system including the effects of the local atomic clocks as well as GNSS

errors (such as ionosphere) and measurement noise

•ePRTC including all sources of error meets proposed Holdover

Requirement “from the start of phase/time holdover, after 30 days of

normal operation, the time output of the ePRTC should be accurate,

when verified against the applicable primary time standard (e.g. UTC),

to a value increasing linearly from 30 ns to 100 ns over a 14 day

period.”

Time Error

Std Cs

Dual Std Cs

HighP Cs

Dual HighP Cs

NextGen AtmClk

Dual NextGen AtmClk{

Single Standard

Cs. Performance

better than 40ns /

17 days


Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system

solutions for communications, defense & security, aerospace and industrial markets. Products include high-

performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power

management products; timing and synchronization devices and precise time solutions, setting the world’s

standard for time; voice processing devices; RF solutions; discrete components; security technologies and

scalable anti-tamper products; Power-over-Ethernet ICs and midspans; as well as custom design capabilities

and services. Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 3,400 employees globally.

Learn more at www.microsemi.com.

©2015 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other

trademarks and service marks are the property of their respective owners.

Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for

any particular purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products

sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical

equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all

performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and

performance specifications or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine suitability of any products and

to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire risk

associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any

other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is

proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at

any time without notice.

Microsemi Corporate Headquarters

One Enterprise, Aliso Viejo, CA 92656 USA

Within the USA: +1 (800) 713-4113

Outside the USA: +1 (949) 380-6100

Sales: +1 (949) 380-6136

Fax: +1 (949) 215-4996

email: [email protected]

Thank You!

Documents

Build on the Momentum Portfolio overview - focus- · PDF fileThe Microsemi SyncServer S600/S650 Industry Leading Security, Accuracy, Reliability and Flexibility Security Accuracy Flexibility