Features• <20 ns RMS to UTC (USNO) via GPS,

typical• GPS SAASM GB-GRAM MPE-S Type II

PPS L1/L2 receiver• <1x10–12 frequency accuracy • Modular timing architecture with unique

and innovative FlexPort™ technology• Most popular timing signal inputs/out-

puts are standard in the base timing I/O module (IRIG B, 10 MHz, 1PPS)

• Four standard GbE ports, all with patented NTP hardware time stamping, two additional 10 GbE ports optional

• Web-based management with high-security cipher suite

• –20°C to 65°C operating temperature, shock and vibration qualified

• Rubidium Atomic Clock or OCXO oscillator upgrades

• Dual power supply option• Hot start ready using DAGR/PLGR• Additional timecode I/O including IRIG A/B/

C37/E/G/NASA/2137/XR3/HaveQuick/PTTI available

• Superior 10 MHz low phase noise options• PTP multi-port/profile output option• PTP input option

Applications• FlexPort timing technology efficiently

and cost-effectively adds innovative “any signal, any connector” technol-ogy, eliminating the wasted space inherent with legacy style fixed-signal modules/BNCs

• Best-in-class low phase noise 10 MHz outputs for satellite ground stations and radar systems

• Multiple GbE network ports for easy network configuration and adaptation

• Reliable and rugged design for long product life and wide application scope

• Many security-hardened, network-based features for stringent IA requirements

Unparalleled FlexibilityThe modular SyncServer S650 SAASM combines the best of time and frequency instrumentation with unique flexibility and powerful network/security-based features.

The base Timing I/O module with eight BNC connectors comes standard with the most popular Timing I/O signals (IRIG B, 10 MHz and 1PPS). When more flexibility is required, the unique FlexPort technology option enables six of the BNCs to output many supported signals (time codes, sine waves, programmable periods), all configurable in real time through the secure web interface. This incredibly flexible BNC-by-BNC con-figuration makes efficient and cost-effective use of the 1U space available. Similar func-tionality is applied to the two input BNCs, as well. Unlike legacy modules with fixed count BNCs outputting fixed signal types per module, FlexPort technology can allow up to 12 BNCs to output any combination of supported signal types.

The Timing I/O module is also available with T1/E1 Telecom I/O, HaveQuick/PTTI I/O and fiber input/output connectors.

Superior Low Phase Noise (LPN) PerformanceFor applications requiring superior LPN 10 MHz signals, two different LPN modules are available. Each module has eight extremely isolated 10 MHz LPN outputs, with each module offering excellent levels of LPN or ultra LPN performance.

Robust Timing and DesignThe GPS SAASM receiver coupled with active thermal compensation technology provides excellent accuracy of <20 ns RMS to UTC (USNO). This is all in addition to a du-rable hardware design subjected to MIL-STD-810H testing, high-reliability components extending the operating temperature range from –20 °C to 65 °C, and a dual power sup-ply option. Upgrading to a high-performance oscillator, such as a Rubidium atomic clock, keeps the S650 accurate for long periods in the event of a GPS service disruption.

Secure NetworkingSecurity is an inherent part of the S650 SAASM. In addition to many security features and protocols, unused services can be disabled. The four standard GbE ports, and two optional 10 GbE ports, can accommo-date 10,000 NTP requests per second using hardware time stamping and compensation. NTP monitoring, charting and MRU logging assist in managing the NTP client activity. For more secure NTP operations, enable the optional security-hardened NTP Reflector™ with line speed, 100% hardware-based NTP packet processing.

Leverage Built-In HardwareThe S650 SAASM includes additional built-in hardware features enabled through software license keys such as the security hardened NTP Reflector and multi-port/profile IEEE 1588 PTP output/input operations.

The SyncServer S650 SAASM—the best choice for mission-critical operations.

www.microchip.com

Frequency and Timing

SyncServer S650 SAASMAccurate, Secure and Flexible Time and Frequency Standard with Integrated SAASM Receiver

S650 SAASM with Timing I/O Modules (Optional Configuration)

www.microchip.com

Four GbE Ports for Performance, Flexibility and SecurityThe S650 SAASM has four dedicated and isolated GbE Ethernet ports, each equipped with NTP hardware time stamping. These are connected to a high-speed microprocessor with microsec-ond-accurate time stamps to assure high-bandwidth NTP performance. This exceeds the need of servicing 10,000 NTP requests per second with no degradation in time stamp accuracy.

Multiple ports provide the flexibility to adapt to different network topologies as networks grow and change. An S650 can be the single time source to synchronize clients on dif-ferent subnets and physical networks. There is only one time reference, but it can appear as though there are four clocks available because each port is independent.

NTP can be served on all four ports (six if 10 GbE ports are added). The highly secure web-based management interface is only available on port 1, so that administrators may choose to keep that IP address private and secure. Unique access control lists per port can govern server response to client requests for time.

Intuitive, Secure and Easy-to-Use Web InterfaceThe modern web interface is the primary control interface of the S650. Once the keypad and display bring the unit online, complete status and control functions are easily found on the left navigation menu.

Standard Management Access SecurityAll of the expected network management protocols are standard in the S650 SAASM. These include mandatory password access, HTTPS/SSL only (using the high-encryption cipher suite), SSH, access control lists, service termination, SNMPv2/v3, and NTP MD5 authentication. All traffic to the S650 CPU is bandwidth-limited for protection against DoS attacks. The local keypad on the server can be password-protected to prevent tampering.

Security-Hardening OptionThe SyncServer S650 SAASM can be further hardened from both an NTP perspective and an authentication perspective through the Security Protocol License option that includes the security-hardened NTP Reflector.

Operational hardening through the 360,000 NTP packet per second NTP Reflector with 100% hardware-based NTP packet processing also works with a CPU-protecting firewall by band-width limiting all non-NTP traffic. The Reflector also monitors packet flow for DoS detection and reporting, yet remains imper-vious to the level of network traffic as it operates at line speed.

Authentication hardening is available for NTP client/server authentication through the NTP Autokey function or user access authentication through TACACS+, RADIUS, and LDAP. Third party CA-signed X.509 certificates are installable for further hardening of management access. For more informa-tion about the protocol license option, see the SyncServer Options datasheet (DS00002920).

The four GbE ports provide network configuration flexibility and enhanced security. Multiple isolated and synchronized time servers can also be configured. Two 10 GbE SFP+ ports can be added for NTP/PTP operations as well.

At-a-glance dashboard presentation combined with logical organization and intuitive controls that make configuring the S650 SAASM easy.

An entire drop-down menu in the S650 SAASM dedicated to security-related protocols.

www.microchip.com

Unprecedented NTP AccuracyThe Stratum 1 level S650 SAASM derives nanosecond-accurate time directly from the atomic clocks aboard the GPS satellites. By using an integrated GPS SAASM GB-GRAM MPE-S Type II PPS receiver, every visible satellite can be tracked and used to maintain accurate and reliable time.

Ultra-High-Performance NTPThe S650 SAASM can effortlessly support hundreds of thousands of network clients while maintaining microsecond-caliber NTP time stamp accuracy. NTP request throughput rates can exceed 10,000 requests/second while maintaining NTP time stamp accuracy. NTP monitoring, charting and MRU logging assist in managing the NTP client activity. If the Security Protocol License option is enabled, the NTP Reflec-tor can process over 360,000 NTP requests per second with 20-nanosecond caliber time stamp accuracy with the added benefit of security-hardening the network port.

Superior Low Phase Noise PerformanceThe S650 SAASM is optimized to provide the best possible low phase noise 10 MHz signals. Two LPN modules are avail-able to choose from depending on the phase noise sensitivity of the user application. Each module has eight extremely isolated 10 MHz LPN outputs with each module offering excellent levels of LPN and Ultra LPN performance from the close in 1 Hz out to 100 kHz.

Multi-Port/Profile IEEE 1588 PTP GrandmasterApplications demanding very precise time accuracy can require the IEEE 1588 precise time protocol (PTP). The S650 SAASM PTP Output License enables multi-port/profile PTP grandmaster operations leveraging the built-in hardware time stamping on each LAN port of the S650.

IEEE 1588 PTP Input License PTP input is useful for tunneling time to the S650 over the network. PTP input can be the primary time reference or used as a backup reference in the event of GPS signal loss. With GPS, the S650 can automatically calibrate and store observed network path delay asymmetries for PTP input use if the GPS signal is lost.

More Timing I/O StandardThe base S650 SAASM can host two modules. The Timing I/O modules are equipped with eight connectors for timing signal input and output. The standard configuration offers a broad yet fixed selection of signal I/Os that include IRIG B, 10 MHz, and 1PPS.

FlexPort—The Ultimate in Timing FlexibilityOur unique FlexPort technology efficiently and cost-effectively adds innovative “any signal, any connector” capabilities, eliminating the wasted space inherent with legacy style fixed signal modules.

The FlexPort option enables the six output connectors (J3-J8) to output many supported signals (time codes, sine waves, programmable periods) all configurable in real time through the secure web interface. User-entered, nanosecond caliber phase offsets for each connector output accommodates variable cable lengths. The two input connectors (J1-J2) can support a wide variety of input signal types.

This level of timing signal flexibility is unprec-edented and can even eliminate the need for additional signal distribution chassis as there is no degradation in the precise quality of the coherent signals.

Oscillator Upgrades Improve Holdover Accuracy and Save Valuable TimeThe standard S650 SAASM is equipped with a crystal oscil-lator that keeps the S650 accurate to nanoseconds when tracking GPS. However, if GPS connectivity is lost and the server is placed in holdover, the oscillator begins to drift, impacting timing accuracy. Upgrading the oscillator improves the holdover accuracy significantly. For example, consider the following drift rates for the standard oscillator compared to the OCXO and Rubidium upgrades.

Oscillator Holdover Drift (first 24 hours)

Standard 400 microseconds

OCXO 25 microseconds

Rubidium <1 microsecond

The value of the upgraded oscillator is that if the GPS signal is lost, the S650 can continue to provide accurate time and frequency. This provides personnel time to correct the problem with only gradual degradation or disruption in time synchronization accuracy.

www.microchip.com

SpecificationsGPS SAASM Receiver/Antenna• L1/L2 GPS SAASM GB-GRAM MPE-S Type II PPS

receiver• Anti-jamming and anti-spoofing for GPS-degraded

environments• All-In-View: 12 tracking channels, static and dynamic

modes• Direct-Y code acquisition• Unclassified when keyed operation• Crypto key input; DS-102

Time Accuracy• <20 ns RMS to UTC (USNO) at 1PPS output, typicalAfter one day locked to GPS; evaluated over normal environ-ment (test range <±5 °F) defined in GR-2830.

Oscillator Aging (Monthly)• Standard: ±1×10–7

• OCXO: ±5×10–9

• Rubidium: ±1×10–10

After one month of continuous operation.

Holdover Accuracy (One Day)• Standard: 400 µs• OCXO: 25 µs• Rubidium: <1 µsEvaluated over normal environment (test range <±5 °F) defined in GR-2830 after five days locked to GPS.

Frequency Output Accuracy and Stability• <1x10–12 at 1 day, after locked to GPS for 1 day

Standard Network Protocols• NTP (SHA1 and MD5), SNTP (unicast)• SNMP v2c, v3 • SNMP MIBII, Custom MIB, system status via SNMP• DHCP/DHCPv6• HTTPS/SSL* (TLS 1.1/1.2)• SMTP forwarding • SSHv2• Telnet• IPv4/IPv6 • Syslog: 1 to 8 servers • Key management protocols can be individually disabled• Port 1: Management and Time protocols• Port 2, 3 and 4 (optional 5 and 6): time protocols only

Optional Network Protocols

NTP Server Performance• 10,000 NTP requests per second while maintaining

accuracy associated with reference time source.** • Stratum 1 through GPS: overall server time stamp ac-

curacy of 5 μs to UTC with 1-sigma variation of 20 μs (typical). All NTP time stamps are hardware-based or have real-time hardware compensation for internal asymmetric delays. The accuracy is inclusive of all NTP packet delays in and out of the server, as measured at the network interface. NTP serves the UTC timescale by definition, but the user can choose to serve GPS timescale instead. The user can also select the UTC leap second smearing/slewing behavior. The SyncServer easily supports millions of NTP clients.

• NTP Activity Charting and MRU Logging: A rolling 24 hour chart displays overall NTPd requests/minute activity. An NTPd Most Recently Used (MRU) list provides details on the most recent 1024 NTP client IP addresses. Data is sortable and exportable. Selection of an individual IP address charts the NTP request totals in 30 minute increments over the past 24 hours. These tools are useful to verify an NTP client is reaching the SyncServer and to identify NTP clients that may be requesting the time more frequently than desired.

• NTP Reflector option: 360,000 NTP client mode three requests per second. NTP packets are timestamped 100% in hardware with prevailing clock accuracy. All non-NTP packets are provided to the CPU on a bandwidth-limited basis. The NTP Reflector is included as part of the Security Protocol License option.

NTP Activity Chart

• Autokey• PTP• TACACS+

• LDAPv3• RADIUS• X.509 HTTPS certificates

Rolling 24-hour NTPd activity chart to accompany Most Recently Used (MRU) list with individual NTPd client activity details and chart.

*SSL_High_Encryption Cypher suite or the SSL_High_And_Medium_Encryption Cypher suite. **<1% NTPd packet drop at 10,000 NTPd requests per second (1GbE/10GbE). <10% NTPd packet drop at 10,000 NTPd requests per second (100BaseT)

www.microchip.com

Mechanical/EnvironmentalSpecification Details

Size1.73" × 17.24" × 15.88" (4.4 cm × 43.8 cm × 40.3 cm) 1U rack mount, including BNCs

AC Power

88 VAC–264 VAC 50 Hz–60 Hz 50W Optional second power supply

Optional Dual-DC Power

20 VDC to 75 VDC 50W

Operating Temperature

Non-Rb: –20°C to 65°C** Rb: –5°C to 55°C

Storage Temperature

–40°C to 85°C** IEC 60068-2-1Ab (low-temp soak), IEC 60068-2-2Bb (hi-temp soak), IEC 60068-2-14Nb (change of temp), IEC 60068-2-78Cb (humidity storage), IEC 60068-2-30Db (humidity condensation)

Operational Humidity

≤95%, non-condensing, IEC 60068-2-78Cb, IEC 60068-2-30Db

Certifications FCC Part 15, Class A, CISPR 32, Class A, UL/CSA 60950-1, IEC 60950-1, EN 60950-1, VCCI, RoHS 5/6

Server weight 12.5 lbs (5.7 kgs) Shipping Package 16.3 lbs (7.4 kgs) **Battery life will be significantly reduced if unit is stored above 60 °C or operated above 55 °C.

Shock and VibrationSpecification Details

Operational ETSI EN-300 019-2-3 Mil-Std-810H

Storage IEC 60068-2-6 Fc (sinusoidal vibration) Mil-Std-810H, figure 514.6C-3

TransportationBounce IEC 60068-2-27Ea (shock 18 g)Vibration IEC 60068-2-64Fh (random vibration)Package Drop IEC 60068-2-31 Ec

Seismic EN300 019-2-3, NEBS GR-63-CORE

Front PanelSpecification Details

Display Sharp, high-resolution, 160 × 32 vacuum-fluorescent

Keypad 0–9 numeric, up, down, left, right, ENTER, CLR, TIME, STATUS, MENU, keypad lockout.

LEDs (tri-color: green/red/orange)Sync Time reference statusNetwork Network connection statusAlarm Fault conditionCV (green only) Cryptovariable statusPLGR/DAGR DB15-M, hot start port

Key Fill Crypto key input. DS-102. Compatible with AN/PYQ-10, AN/CYZ-10, KYK-13.

Zeroize button (recessed) Zeroize crypto keys

Rear PanelSpecification Details

NetworkFour RJ-45 100/1000BASE-T Ethernet, speed/duplex: auto, 100/1000 full

Serial Data/TimingNMEA-0183; ZDA/GGA/GSV/RMC messages; NENA 04-002 messages; DB9-F RS-232 user selectable rate to 115.2 kbps

1 PPS Out BNC, rising edge on-time, TTL into 50Ω

GPS BNC L1/L2, 1575/1227 MHz

Console DB9-F RS-232Alarm Relay SPST, maximum 300 mA and 32V

Power IEC 60320 C14 connector, optional second power supply/connector, hitless switching

Optional DC Power Mating connector is Molex HCS-125 series

Product IncludesS650 SAASMSyncServer S650 SAASM (no option modules installed in base unit), locking power cord, and rack mount ears. Two-year hardware warranty. Current manual and MIB are available online at www.microsemi.com. MIB can be downloaded from the SyncServer.

S650 with Timing I/O Modules (Optional Configuration)

Ordering InformationCustom configure your build-to-order SyncServer S650 SAASM using the online SyncServer Configurator tool at my.microsemi.com. Configurations can be submitted as requests for quotes.

www.microchip.com

The Microchip name and logo and the Microchip logo are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks mentioned herein are property of their respective companies. © 2019, Microchip Technology Incorporated. All Rights Reserved. 3/19 900-00776-000 Rev B DS00002904A

Note: The SyncServer S650 SAASM has been granted Security Approval by the Global Positioning System Directorate.

Hardware OptionsTiming I/O Module(s)Equipped with eight connectors for timing signal input and output, the standard configuration offers a broad yet fixed selection of signal I/O, including IRIG B, 10 MHz and 1PPS. Five variations of the Timing I/O Module are available as listed below. See the SyncServer Options Datasheet (DS00002920) more signal types.• Timing I/O Module• Timing I/O Module + Telecom I/O• Timing I/O Module + HaveQuick/PTTI• Timing I/O Module + Fiber Outputs• Timing I/O Module + Fiber Input

10 MHz Standard Low Phase Noise ModuleEight isolated, phase-coherent 10 MHz LPN outputs, with excellent levels of LPN and exhibiting low spurious noise characteristics.

10 MHz Ultra-Low Phase Noise ModuleSuperior levels of LPN provided on eight extremely isolated, phase-coherent 10 MHz LPN outputs with low spurious noise characteristics.

10 GbE LAN PortsTwo additional 10 GbE SFP+ ports equipped with hardware time stamping that supports NTP, PTP and NTP Reflector operations.

Rubidium Atomic Oscillator UpgradeImproves stability, accuracy, and holdover accuracy. Holdover accuracy is <1 μs for the first 24 hours and <3 μs after the first three days.

OCXO Oscillator UpgradeImproves holdover accuracy to 25 μs for the first day.

Dual AC Power SuppliesThe dual-corded, dual-AC power supply option provides load sharing and active power management system with hitless failover.

Dual DC Power SuppliesThe dual-corded, dual-DC power supply option provides load sharing and active power management system with hitless failover.

Antenna AccessoriesAntenna cables and accessories enable versatile solutions to meet most installation requirements.Note: For complete information, see the SyncServer Options Datasheet (DS00002920).

Software OptionsSecurity Protocol License with Security-Hardened NTP ReflectorSecurity-hardened NTP Reflector and authentication hardening with NTP Autokey, TACACS+, RADIUS, LDAP and CA-signed X.509 certificates.

PTP Output/Grandmaster (Simultaneous Multi-Port/Profile)Single license enables multi-port, multi-profile IEEE 1588 PTP Grandmaster operations leveraging the built-in hardware time stamping in all SyncServers.

PTP InputPTP as a timing input for tunneling time through PTP or as a backup time reference in the event of the loss of the GNSS signal.

FlexPort Technology for Timing I/O ModulesEnables the output connectors to output many supported signals (time codes, sine waves, programmable rates) all configurable in real time. Input connectors can support a wide variety of input signal types.

1PPS Time Interval/Event Time MeasurementsUse the S650 Timing I/O module to measure, store and sta-tistically display in real time the difference of an external 1PPS relative to the S650. The Event Time capture feature time tags and stores external events.

Time-Triggered Programmable PulseProvides a user defined, repetitive and precise time-of-day pulse(s) at specific times or provides periodic, time-based pulse outputs.

Synchronization SoftwareComprehensive MS Windows-based network time synchroni-zation software with monitoring and auditing functions.

Disclaimer from Microchip SyncServer S650 SAASM, document DS00002904A Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights unless otherwise stated.