Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
1109-1257-1HOUSING
1105-1257-2PIN
1110-4550DETENT SPRING
1110-4549DETENT BALL
(2 pcs.)
1107-1257-4HANDLE
1110-4524-G5HEX BOLT
1110-4511LOCK NUT
1110-4503GREASE FITTING
(2 pcs.)
6-7/8"175 MM
4-3/8"111 MM
70º
3-1/2"89 MM
1-3/16"30 MM
1-5/16"33 MM
3-5/32"80 MM3-15/16"
100.5 MM
O.D. 3-3/16"Ø81 MM
O.D. 3/4"Ø19 MM
9/16"14 MM
1105-3259-2 LOW-PROFILEPIN used on 1102-1257-LP-L/RTwistlock
MODEL 1102-1257-RMODEL 1102-1257-L
MODEL 1102-1257-Lfor Front Curbside& Rear Roadside
MODEL 1102-1257-Rfor Front Roadside& Rear Curbside
PLEASE NOTE: Not all Twistlocks are supplied with an integral handle latch. All Twistlocks should be outfitted with a handle latch upon installation. See section 1108 for latches that may work for your application.
EXPLODED VIEW
. Standard locking clearance. Dual Grease Fittings. Weld chamfer on Housing. Designed to hang straight for welding
FINISH: PRIMERWEIGHT: 9.2 LBS / 4.17 Kg
1102-1
904-696-0010 FAX: 904-696-0019E-mail: [email protected]
11/30/20
TWISTLOCKS – DROP-IN TYPE70° HANDLE ROTATION
CHASSIS
MODEL 1102-3247-Lfor Front Curbside& Rear Roadside
MODEL 1102-3247-Rfor Front Roadside& Rear Curbside
7-1/8"180.2 MM
5-3/8"136.1 MM
70º
4-1/4"107.6 MM
1-1/4"31.8 MM
1-1/16"27 MM
3-3/16"80.9 MM3-13/16"
97 MM
O.D. 3-3/16"Ø81 MM
O.D. 3/4"Ø19 MM
MODEL 1102-3247-RMODEL 1102-3247-L
J.B. Hunt style
PLEASE NOTE: Not all Twistlocks are supplied with an integral handle latch. All Twistlocks should be outfitted with a handle latch upon installation. See section 1108 for latches that may work for your application.
EXPLODED VIEW
. J.B. Hunt style for Thin Flange Container Fittings. Does not lock over standard ISO Corner Fitting. Dual Grease Fittings
FINISH: PRIMERWEIGHT: 8.38 LBS / 3.8 Kg
9/16"14 MM
1105-1509PIN
1110-4502DETENT SPRING
1110-4501DETENT BALL
(2 pcs.)
1109-3247-1HOUSING
1110-4503GREASE FITTING
(2 pcs.)
1107-1618-RHANDLE
1110-4524-G5HEX BOLT
1110-4511LOCK NUT
1102-2
904-696-0010 FAX: 904-696-0019E-mail: [email protected]
12/1/20
TWISTLOCKS – DROP-IN TYPE70° HANDLE ROTATION
CHASSIS
1109-3248-1HOUSING
1105-1257-2PIN
1110-4502DETENT SPRING
1110-4501DETENT BALL
(2 pcs.)
1107-3248-4HANDLE
1110-4524-G5HEX BOLT
1110-4511LOCK NUT
1110-4503GREASE FITTING
(2 pcs.)
5-3/8"136.6 MM
70º
7-1/2"190.5 MM
3-13/16"96.5 MM
1-3/16"30 MM
1-1/16"27 MM
3-3/8"86.5 MM4-1/16"
103.5 MM
O.D. 3-3/16"Ø81 MM
9/16"14 MM
O.D. 3/4"Ø19 MM
PLEASE NOTE: Not all Twistlocks are supplied with an integral handle latch. All Twistlocks should be outfitted with a handle latch upon installation. See section 1108 for latches that may work for your application.
MODEL 1102-3248-Lfor Front Curbside
& Rear Roadside
MODEL 1102-3248-Rfor Front Roadside& Rear Curbside
MODEL 1102-3248-RMODEL 1102-3248-L
J.B. Hunt style
EXPLODED VIEW
. J.B. Hunt style for Thin Flange Container Fittings. Does not lock over standard ISO Corner Fitting. Dual Grease Fittings
FINISH: PRIMERWEIGHT: 9.48 LBS / 4.3 Kg
1102-3
904-696-0010 FAX: 904-696-0019E-mail: [email protected]
12/1/10
TWISTLOCKS – DROP-IN TYPE70° HANDLE ROTATION
CHASSIS
1109-1257-1HOUSING
1105-1257-2PIN
1110-4549DETENT BALL
(2 pcs.)
1107-3248-4HANDLE
1110-4524-G5HEX BOLT
1110-4511LOCK NUT
1110-4503GREASE FITTING
(2 pcs.)
1110-4550DETENT SPRING
70º
3-9/16"90.5 MM
7-1/2"190.5 MM
5-3/8"136.5 MM
3-1/8"80 MM
1-5/16"33.5 MM
1-3/16"30 MM
3-15/16"100.5 MM
O.D. 3-3/16"Ø81 MM
O.D. 3/4"Ø19 MM
9/16"14 MM
. Same as 1102-1257-L/-R except forlonger handle. Standard locking clearance. Dual Grease Fittings. Weld chamfer on Housing. Designed to hang straight for welding
MODEL 1102-3257-RMODEL 1102-3257-L
PLEASE NOTE: Not all Twistlocks are supplied with an integral handle latch. All Twistlocks should be outfitted with a handle latch upon installation. See section 1108 for latches that may work for your application.
MODEL 1102-3257-Lfor Front Curbside& Rear Roadside
MODEL 1102-3257-Rfor Front Roadside& Rear Curbside
EXPLODED VIEW FINISH: PRIMERWEIGHT: 8.45 LBS / 3.83 Kg
1102-4
904-696-0010 FAX: 904-696-0019E-mail: [email protected]
11/30/20
TWISTLOCKS – DROP-IN TYPE70° HANDLE ROTATION
CHASSIS
2-11/16"68.6 MM
70º
4-7/8"123.3 MM
3-7/16"88 MM
1-3/16"30 MM
1-5/16"33.5 MM
3-1/8"80 MM
O.D. 3/4"Ø19 MM
MODEL 1102-3267-RMODEL 1102-3267-L
PLEASE NOTE: Not all Twistlocks are supplied with an integral handle latch. All Twistlocks should be outfitted with a handle latch upon installation. See section 1108 for latches that may work for your application.
MODEL 1102-3267-Lfor Front Curbside& Rear Roadside
MODEL 1102-3267-Rfor Front Roadside& Rear Curbside
EXPLODED VIEW FINISH: WELDABLE PRIMERWEIGHT: 9.3 LBS / 4.2 Kg
. Standard locking clearance. Dual Grease Fittings. Weld chamfer on Housing. Designed to hang straight for welding. Approved for use on Maersk chassis
1105-1257-2PIN
1110-4549DETENT BALL
(2 pcs.)
1110-4550DETENT SPRING
1109-1257-1HOUSING
1110-4503GREASE FITTING
(2 pcs.)
1107-8200HANDLE
1110-4769-G8HEX BOLT
1110-4511LOCK NUT
1102-5
904-696-0010 FAX: 904-696-0019E-mail: [email protected]
12/1/20
TWISTLOCKS – DROP-IN TYPE70° HANDLE ROTATION
CHASSIS
3-5/16"84.6 MM
70º
7"178 MM
4-3/8"111 MM
2"51 MM
1-5/16"33.5 MM
3-1/8"80 MM3-13/16"
97 MM
O.D. 3-3/16"Ø81 MM
O.D. 3/4"Ø19 MM
9/16"14 MM
PLEASE NOTE: Not all Twistlocks are supplied with an integral handle latch. All Twistlocks should be outfitted with a handle latch upon installation. See section 1108 for latches that may work for your application.
MODEL 1102-3557-Lfor Front Curbside& Rear Roadside
MODEL 1102-3557-Rfor Front Roadside& Rear Curbside
MODEL 1102-3557-RMODEL 1102-3557-L
EXPLODED VIEW FINISH: PRIMERWEIGHT: 10.6 LBS / 4.81 Kg
1105-3557-2PIN
1110-4549DETENT BALL
(2 pcs.)
1110-4550DETENT SPRING
1109-1257-1HOUSING
1110-4503GREASE FITTING
(2 pcs.)
1107-1257-4HANDLE
1110-4524-G5HEX BOLT
1110-4511LOCK NUT
. Standard locking clearance. Dual Grease Fittings. Weld chamfer on Housing. Designed to hang straight for welding. Approved for use on Maersk chassis. High Cone design
1102-6
904-696-0010 FAX: 904-696-0019E-mail: [email protected]
12/1/20
TWISTLOCKS – DROP-IN TYPE70° HANDLE ROTATION
CHASSIS
1105-1257-2PIN
1110-4550DETENT SPRING
1110-4549DETENT BALL
(2 pcs.)
90º
1-3/16"30 MM
1-5/16"33.5 MM
3-1/8"80 MM3-15/16"
100.5 MM
O.D. 3-3/16"Ø81 MM
MODEL 1102-1259-RMODEL 1102-1259-L
PLEASE NOTE: Not all Twistlocks are supplied with an integral handle latch. All Twistlocks should be outfitted with a handle latch upon installation. See section 1108 for latches that may work for your application.
MODEL 1102-1259-Lfor Front Curbside& Rear Roadside
MODEL 1102-1259-Rfor Front Roadside& Rear Curbside
EXPLODED VIEW FINISH: PRIMERWEIGHT: 9 LBS / 4.08 Kg
. Standard locking clearance. Dual Grease Fittings. Weld chamfer on Housing. Designed to hang straight for welding1109-1257-1HOUSING
1110-4503GREASE FITTING
(2 pcs.)
1107-1259-4HANDLE
1110-4524-G8HEX BOLT
1110-4511LOCK NUT
9/16"14 MM
O.D. 3/4"Ø19 MM
3-9/16"90.5 MM
7-1/2"190.5 MM
3-3/16"81 MM
1102-7
904-696-0010 FAX: 904-696-0019E-mail: [email protected]
12/1/20
TWISTLOCKS – DROP-IN TYPE90° HANDLE ROTATION
CHASSIS
1109-1690-1HOUSING
1105-1690-2PIN1110-4501
DETENT BALL(2 pcs.)
1107-1690-4HANDLE
1110-4524-G5HEX BOLT
1110-4511HEX LOCK NUT
1110-4503GREASE FITTING
(2 pcs.)
1110-4502DETENT SPRING
O.D. 5/8"Ø16 MM
5/8"16 MM
O.D. 3-3/16"Ø81 MM2-7/16"
61.5 MM
1-3/16"30 MM
1-7/16"36.5 MM
1-11/16"43 MM
1-11/16"42.9 MM
1-3/8"34.9 MM
90º
MODEL 1102-1690-RMODEL 1102-1690-L
PLEASE NOTE: Not all Twistlocks are supplied with an integral handle latch. All Twistlocks should be outfitted with a handle latch upon installation. See section 1108 for latches that may work for your application.
MODEL 1102-1690-Lfor Front Bolster, Curbside
MODEL 1102-1690-Rfor Front Bolster, Roadside
. Designed for Front Bolstersw/ limited space. High locking clearance. Dual Grease Fittings. Weld chamfer on Housing. Designed to hang straight for welding
EXPLODED VIEWFINISH: PRIMER
WEIGHT: 7.5 LBS / 3.4 Kg
1102-8
904-696-0010 FAX: 904-696-0019E-mail: [email protected]
12/2/20
TWISTLOCKS – DROP-IN TYPE90° HANDLE ROTATION
CHASSIS
3-27/32"98 MM
2-1/4"57 MM
1-3/16"30 MM
1-7/16"36.5 MM
5/8"16 MM
1-11/16"43 MM 2-13/32"
61.5 MM
4"101.6 MM
O.D. 5/8"Ø16 MM
1109-1690-1HOUSING
1105-1691-2PIN
1110-4501DETENT BALL
(2 pcs.)
1110-4503GREASE FITTING
(2 pcs.)
1107-1691-4HANDLE
1110-4769-G8HEX BOLT1110-4511
LOCK NUT
1110-4502DETENTSPRING
MODEL 1102-1691SPECIAL ORDER ONLY
PLEASE NOTE: Not all Twistlocks are supplied with an integral handle latch. All Twistlocks should be outfitted with a handle latch upon installation. See section 1108 for latches that may work for your application.
. Designed for Front Bolstersw/ limited space. High locking clearance. Dual Grease Fittings. Weld chamfer on Housing. Designed to hang straight for welding
EXPLODED VIEWFINISH: PRIMER
WEIGHT: 7.57 LBS / 3.43 Kg
1102-9
904-696-0010 FAX: 904-696-0019E-mail: [email protected]
12/2/20
TWISTLOCKS – DROP-IN TYPE90° HANDLE ROTATION
CHASSIS
1109-1257-1HOUSING
1105-1257-2PIN
1110-4550DETENT SPRING
1110-4549DETENT BALL
(2 pcs.)
1107-3229-4HANDLE
1110-4524-G5HEX BOLT
1110-4511LOCK NUT
1110-4503GREASE FITTING
(2 pcs.)
1-3/16"30 MM
1-5/16"33.5 MM
3-1/8"80 MM3-15/16"
100.5 MM
O.D. 3/4"Ø19 MM
5/8"16 MM
O.D. 3-3/16"Ø81 MM
1-5/8"41.3 MM
90º
7-1/4"184.2 MM
MODEL 1102-3229-RMODEL 1102-3229-L
PLEASE NOTE: Not all Twistlocks are supplied with an integral handle latch. All Twistlocks should be outfitted with a handle latch upon installation. See section 1108 for latches that may work for your application.
MODEL 1102-3229-Lfor Front Curbside& Rear Roadside
MODEL 1102-3229-Rfor Front Roadside& Rear Curbside
. Standard locking clearance. Dual Grease Fittings. Handle designed for narrow Bolstersw/ limited space
EXPLODED VIEW FINISH: PRIMERWEIGHT: 9.15 LBS / 4.15 Kg
2"50.8 MM
1102-10
904-696-0010 FAX: 904-696-0019E-mail: [email protected]
12/2/20
TWISTLOCKS – DROP-IN TYPE90° HANDLE ROTATION
CHASSIS
5"127.5 MM
90º
1109-1257-1HOUSING
1105-1257-2PIN
1110-4549DETENT BALL
(2 pcs.)
1107-8533-4HANDLE
1110-4768-G8HEX BOLT
1110-4511LOCK NUT
1110-4503GREASE FITTING
(2 pcs.)
1110-4550DETENT SPRING
3-15/16"100.5 MM
1-3/16"30 MM
3-3/16"80 MM
1-5/16"33.5 MM
O.D. 5/8"Ø16 MM
O.D. 3-3/16"Ø81 MM
9/16"14 MM
FINISH: PRIMERWEIGHT: 8.28 LBS / 3.76 Kg
MODEL 1102-3258
PLEASE NOTE: Not all Twistlocks are supplied with an integral handle latch. All Twistlocks should be outfitted with a handle latch upon installation. See section 1108 for latches that may work for your application.
. Standard locking clearance. Dual Grease Fittings. Weld chamfer on Housing. Designed to hang straight for welding
EXPLODED VIEW
1102-11
904-696-0010 FAX: 904-696-0019E-mail: [email protected]
12/3/20
TWISTLOCKS – DROP-IN TYPE90° HANDLE ROTATION
CHASSIS
1109-1257-1HOUSING
1105-3259-2PIN
1110-4550DETENT SPRING
1110-4549DETENT BALL
(2 pcs.)
1107-1259-4HANDLE
1110-4524-G8HEX BOLT
1110-4511LOCK NUT
1110-4503GREASE FITTING
(2 pcs.)
O.D. 3/4"Ø19 MM
9/16"14 MM
O.D. 3-3/16"Ø81 MM
15/16"23.8 MM
1-5/16"33.5 MM
3-3/16"80 MM3-13/16"
97 MM
3-3/16"81 MM
90º
3-1/2"90.5 MM
7-1/2"190.5 MM
MODEL 1102-3259-RMODEL 1102-3259-L
MODEL 1102-3259-Lfor Front Curbside& Rear Roadside
MODEL 1102-3259-Rfor Front Roadside& Rear Curbside
PLEASE NOTE: Not all Twistlocks are supplied with an integral handle latch. All Twistlocks should be outfitted with a handle latch upon installation. See section 1108 for latches that may work for your application.
FINISH: PRIMERWEIGHT: 8.78 LBS / 3.98 Kg
. Standard locking clearance. Low-profile Head for shallowContainer Fittings. Dual Grease Fittings. Weld chamfer on Housing. Designed to hang straight for welding
EXPLODED VIEW
1102-12
904-696-0010 FAX: 904-696-0019E-mail: [email protected]
12/2/20
TWISTLOCKS – DROP-IN TYPE90° HANDLE ROTATION, LOW PROFILE
CHASSIS
1109-1257-1HOUSING
1105-3259-2PIN
1110-4550DETENT SPRING
1110-4549DETENT BALL
(2 pcs.)
1107-3260-4HANDLE
1110-4524-G5HEX BOLT
1110-4511LOCK NUT
1110-4503GREASE FITTING
(2 pcs.)
O.D. 3/4"Ø19 MM
9/16"14 MM
O.D. 3-3/16"Ø81 MM
2-3/8"60.5 MM
90º
2-3/4"70 MM
7-1/2"190.5 MM
15/16"23.8 MM
1-5/16"33.5 MM
3-3/16"80 MM3-13/16"
97 MM
MODEL 1102-3260-RMODEL 1102-3260-L
MODEL 1102-3260-Lfor Front Curbside& Rear Roadside
MODEL 1102-3260-Rfor Front Roadside& Rear Curbside
PLEASE NOTE: Not all Twistlocks are supplied with an integral handle latch. All Twistlocks should be outfitted with a handle latch upon installation. See section 1108 for latches that may work for your application.
FINISH: PRIMERWEIGHT: 9.5 LBS / 4.31 Kg
. Standard locking clearance. Low-profile Head for shallowContainer Fittings. Dual Grease Fittings. Weld chamfer on Housing. Designed to hang straight for welding
EXPLODED VIEW
1102-13
904-696-0010 FAX: 904-696-0019E-mail: [email protected]
12/2/20
TWISTLOCKS – DROP-IN TYPE90° HANDLE ROTATION, LOW PROFILE
CHASSIS
2-3/8"60.5 MM
2-3/4"70 MM
7-1/2"190.5 MM
90º
1-3/16"30 MM
1-5/16"33.5 MM
3-3/16"80 MM3-13/16"
97 MM
O.D. 3/4"Ø19 MM
9/16"14 MM
O.D. 3-3/16"Ø81 MM
PLEASE NOTE: Not all Twistlocks are supplied with an integral handle latch. All Twistlocks should be outfitted with a handle latch upon installation. See section 1108 for latches that may work for your application.
MODEL 1102-3261-RMODEL 1102-3261-L
MODEL 1102-3261-Lfor Front Curbside& Rear Roadside
MODEL 1102-3261-Rfor Front Roadside& Rear Curbside
1109-1257-1HOUSING
1105-1257-2PIN
1110-4550DETENT SPRING
1110-4549DETENT BALL
(2 pcs.)
1107-3260-4HANDLE
1110-4524-G8HEX BOLT
1110-4511LOCK NUT
1110-4503GREASE FITTING
(2 pcs.)
MODEL 1102-3261-R SHOWN DIMENSIONEDMODEL 1102-3261-L IS MIRROR OPPOSITE
. Standard locking clearance. Dual Grease Fittings. Weld chamfer on Housing. Designed to hang straight for welding
FINISH: WELDABLE PRIMERWEIGHT: 9 LBS / 4.08 KgEXPLODED VIEW
1102-14
904-696-0010 FAX: 904-696-0019E-mail: [email protected]
12/3/20
TWISTLOCKS – DROP-IN TYPE90° HANDLE ROTATION
CHASSIS
2-3/8"60.5 MM
90º
2-3/4"70 MM
7-1/2"190.5 MM
2"50.8 MM
1-5/16"33.5 MM
3-3/16"80 MM3-13/16"
97 MM
O.D. 3/4"Ø19 MM
9/16"14 MM
O.D. 3-3/16"Ø81 MM
MODEL 1102-3262-RMODEL 1102-3262-L
MODEL 1102-3262-Lfor Front Curbside& Rear Roadside
MODEL 1102-3262-Rfor Front Roadside& Rear Curbside
PLEASE NOTE: Not all Twistlocks are supplied with an integral handle latch. All Twistlocks should be outfitted with a handle latch upon installation. See section 1108 for latches that may work for your application.
. Standard locking clearance. Dual Grease Fittings. Weld chamfer on Housing. Designed to hang straight for welding. High Cone design
FINISH: PRIMERWEIGHT: 10.27 LBS / 4.66 KgEXPLODED VIEW
1109-1257-1HOUSING
1105-3557-2PIN
1110-4550DETENT SPRING
1110-4549DETENT BALL
(2 pcs.)
1107-3260-4HANDLE
1110-4524-G5HEX BOLT
1110-4511LOCK NUT
1110-4503GREASE FITTING
(2 pcs.)
1102-15
904-696-0010 FAX: 904-696-0019E-mail: [email protected]
12/3/20
TWISTLOCKS – DROP-IN TYPE90° HANDLE ROTATION
CHASSIS
1109-1257-1HOUSING
1105-1257-2PIN
1110-4550DETENT SPRING
1110-4549DETENT BALL
(2 pcs.)
1107-3269-4HANDLE
1110-4769-G8HEX BOLT
1110-4511LOCK NUT
1110-4503GREASE FITTING
(2 pcs.)
PLEASE NOTE: Not all Twistlocks are supplied with an integral handle latch. All Twistlocks should be outfitted with a handle latch upon installation. See section 1108 for latches that may work for your application.
. Same as 1102-1259 Twistlocks except for Handle to Pin c/c. Standard locking clearance. Dual Grease Fittings. Weld chamfer on Housing. Designed to hang straight for welding
MODEL 1102-3269-RMODEL 1102-3269-L
MODEL 1102-3269-Lfor Front Curbside& Rear Roadside
MODEL 1102-3269-Rfor Front Roadside& Rear Curbside
1102-3269-R SHOWN DIMENSIONEDMODEL 1102-3269-L IS MIRROR OPPOSITE.
2-3/16"55.2 MM
2-9/16"65 MM
7"178 MM
90º
1-3/16"30 MM
1-5/16"33.5 MM
3-3/16"80 MM3-15/16"
100.5 MM
6-7/16"164 MM
O.D. 3/4"Ø19 MM
9/16"14 MM
O.D. 3-3/16"Ø81 MM
FINISH: WELDABLE PRIMERWEIGHT: 9.26 LBS / 4.2 KgEXPLODED VIEW
1102-16
904-696-0010 FAX: 904-696-0019E-mail: [email protected]
12/3/20
TWISTLOCKS – DROP-IN TYPE90° HANDLE ROTATION
CHASSIS
3-3/16"81 MM
3-9/16"90.5 MM
7-1/2"190.5 MM
90º
2"50.8 MM
1-5/16"33.5 MM
3-3/16"80 MM3-13/16"
97 MM
O.D. 3/4"Ø19 MM
9/16"14 MM
O.D. 3-3/16"Ø81 MM
MODEL 1102-3559-RMODEL 1102-3559-L
PLEASE NOTE: Not all Twistlocks are supplied with an integral handle latch. All Twistlocks should be outfitted with a handle latch upon installation. See section 1108 for latches that may work for your application.
MODEL 1102-3559-Lfor Front Curbside& Rear Roadside
MODEL 1102-3559-Rfor Front Roadside& Rear Curbside
. Standard locking clearance. Dual Grease Fittings. Weld chamfer on Housing. Designed to hang straight for welding. High Cone design
EXPLODED VIEW FINISH: PRIMERWEIGHT: 10.64 LBS / 4.8 Kg
1109-1257-1HOUSING
1105-3557-2PIN
1110-4550DETENT SPRING
1110-4549DETENT BALL
(2 pcs.)
1107-1259-4HANDLE
1110-4524-G5HEX BOLT
1110-4511LOCK NUT
1110-4503GREASE FITTING
(2 pcs.)
1102-17
904-696-0010 FAX: 904-696-0019E-mail: [email protected]
12/3/20
TWISTLOCKS – DROP-IN TYPE90° HANDLE ROTATION
CHASSIS
1102-01 TWISTLOCK DROP-IN 12571102-02 TWISTLOCK DROP-IN 32471102-03 TWISTLOCK DROP-IN 32481102-04 TWISTLOCK DROP-IN 32571102-05 TWISTLOCK DROP-IN 32671102-06 TWISTLOCK DROP-IN 35571102-07 TWISTLOCK DROP-IN 12591102-08 TWISTLOCK DROP-IN 16901102-09 TWISTLOCK DROP-IN 16911102-10 TWISTLOCK DROP-IN 32291102-11 TWISTLOCK DROP-IN 32581102-12 TWISTLOCK DROP-IN 32591102-13 TWISTLOCK DROP-IN 32601102-14 TWISTLOCK DROP-IN 32611102-15 TWISTLOCK DROP-IN 32621102-16 TWISTLOCK DROP-IN 3559