1
The information contained in this chart and the actual specifications are subject to change without notice and should not be considered as a commitment by supplier. Manufactured to Exceed Performance Tests of ANSI & AS / NZ Standards Manufactured by : PT. INDAL ALUMINIUM INDUSTRY Tbk. L DOUBLE SIDED STEP LADDER Safety anti-slip treads and feet. Identical front and back sections. Double braced on top and bottom steps. Two piece extruded top. Diagonal spreader bars prevent walking. Model No. Working Load Weight (lbs) Height (ft) TRDS2D TRDS3D TRDS4D TRDS5D TRDS6D TRDS7D TRDS8D 2 3 4 5 6 7 8 300 lbs 300 lbs 300 lbs 250 lbs 250 lbs 250 lbs 250 lbs 6 9 10 14 15 19 22 Non conductive side rails. Safety anti-slip treads and feet. Double braced top and bottom steps. Red copolymer tool tray top with paint can hook. Diagonal spreader bars prevent walking. SINGLE SIDED STEP LADDER Model No. Working Load Weight (lbs) Height (ft) TRDSF5 TRDSF6 TRDSF7 TRDSF8 5 6 7 8 250 lbs 250 lbs 250 lbs 250 lbs 14 17 20 22 DUAL PURPOSE “UP n UP” LADDER Full width rear section for greater stability. Solid rivet construction for greater durability. Aluminum components anodized for increased corrosion resistance. Red Copolymer top with paint can hook. Locking spreader bars increase stiffness. Lock & release clips. Model No. Working Load Weight (lbs) Height (ft) TRDDPF6 TRDDPF7 6 to 10 7 to 12 250 lbs 250 lbs 20 24 EXTENSION LADDER Non conductive side rails. Safety anti-slip treads and feet. Bottom braced rung. Automatic ladder lock. Control ropes at sides to avoid tangling. Polycarbonate end caps on all end sections. Pole V-rung with rubber pad. Model No. Working Load Weight (lbs) Height (ft) TRDXF14 TRDXF18 TRDXF22 TRDXF26 8 to 14 10 to 18 12 to 22 14 to 26 250 lbs 250 lbs 250 lbs 250 lbs 26 33 40 46 DOUBLE SIDED STEP LADDER Non conductive side rails. Identical front & back. Diagonal spreader bars prevent walking. Plated steel semi tubular rivet construction. Double braced top & bottom steps. Anti-slip feet. Model No. Working Load Weight (lbs) Height (ft) TRDSF3D TRDSF4D TRDSF5D TRDSF6D TRDSF7D TRDSF8D 3 4 5 6 7 8 300 lbs 300 lbs 250 lbs 250 lbs 250 lbs 250 lbs 10 13 17 20 24 27 Wide work surface Strong & durable Large work platform Working load limit 500 lbs per 13’ span ALUMINUM PLANK 0.7 x 0.2 x 10’ 0.7 x 0.2 x 13’ 0.7 x 0.2 x 16’ 0.7 x 0.2 x 20’ 27 36 45 54 AP 3 AP 4 AP 5 AP 6 Weight (lbs) Dimension (ft) Model No. 3 piece strong rung joint for anti-twist performance. Safety anti-slip treads and feet. Double braced on top and bottom steps. Red copolymer tool tray top with paint can hook. Diagonal spreader bars prevent walking. SINGLE SIDED STEP LADDER Model No. Working Load Weight (lbs) Height (ft) TRDS4 TRDS5 TRDS6 TRDS7 TRDS8 4 5 6 7 8 300 lbs 250 lbs 250 lbs 250 lbs 250 lbs 9 10 11 13 16 DUAL PURPOSE “UP n UP” LADDER Full width rear section for greater stability. Anodized for increased corrosion resistance. Locking spreader bars increase stiffness. Lock & release clips. Red Copolymer top with paint can hook. Solid rivet construction for greater durability. Model No. Working Load Weight (lbs) Height (ft) TRDDP5 TRDDP6 TRDDP7 5 to 8 6 to 10 7 to 12 300 lbs 250 lbs 250 lbs 10 12 14 Heavy Duty “I” beam styles. Comfortable “D” rung used. Safety anti-slip treads and feet. Same width base and fly sections. Ladder lock at top prevent tripping. Control ropes at sides to avoid tangling. EXTENSION LADDER Model No. Working Load Weight (lbs) Height (ft) TRDX16 TRDX18 TRDX22 10 to 16 11 to 18 12 to 22 250 lbs 250 lbs 250 lbs 28 30 34 STRENGTH MULTI PURPOSE LADDER Adjustable, self locking hinge (3 positions). Slip resistant rungs. Splayed end sections for greater stability. Anodized for increased corrosion resistance. TRDMP13 Assembled Weight (lbs) 24 Height (ft) 7 to 13 Load Rating 250 lbs Model No. Model No. TRDMP13 Assembled Extension Ladder 13ft Step Ladder 7ft Model No. TRDMP13 Assembled Scaffold Ladder 3ft Storage (folded) 3ft WORK PLATFORM Safety anti-slip platform, step, treads & feet. Multi purpose trade work platform. Steel hinge, brace and lock. Strong, durable, easy to use and store. Available in fibreglass rail ( TRDWP60F ). Height (ft) 2 2 2 2 Weight (lbs) 9 16 13 13 Model No. 1. TRDWP30 (Alum.) 2. TRDWP45 (Alum.) 3. TRDWP60 (Alum.) 4. TRDWP60F (Fibre.) 1 x 2 1.5 x 4 2 x 2 2 x 2 Platform Dim. (ft) Model No. 1. TRDWP30 (Alum.) 2. TRDWP45 (Alum.) 3. TRDWP60 (Alum.) 4. TRDWP60F (Fibre.) Working Load 250 lbs 250 lbs 250 lbs 250 lbs SLIMLINE PLATFORM LADDER Special slim ladder with wide platform. Strong construction with aluminum hinge and connection between steps. Saves space, thick 1.7inch, easy to store. Safety anti-slip treads and feet. 13 16 18 25 Model No. Platform Height Weight (lbs) Working Load TRDP5/2 TRDP6/3 TRDP7/4 TRDP8/5 2 3 4 5 250 lbs 250 lbs 250 lbs 300 lbs COMPACT SLIM LADDER Strong construction with nylon hinge at top and steel connecting rod between steps. Easy to store, save space, very practical and portable. Special slim ladder, 1.7” thick only. Safety anti-slip treads and feet. Weight (lbs) Model No. Height (ft) Working Load 7 10 TS-52 (2 steps) TS-80 (3 steps) 2 3 225 lbs 225 lbs US Patent N0 6.347.687 1.7 inch SINGLE FUNCTION LADDER WITH RAIL Safety anti-slip treads and feet. Stable and easy to use. Tubular safety rail at top. Each step protected with plastic covers Model No. 2 5 TT-60 (2 steps) 225lbs 3 7 TT-80 (3 steps) 225lbs 4 8 TT-110 (4 steps) 225lbs Height (ft) Weight (lbs) Working Load FOR USE WITH PROP AND PROPF PLATFORM LADDERS Platform Gate Lock PLATFORM GATE 500 500 Lbs Lbs WORKING LOAD WORKING LOAD WORKING LOAD WORKING LOAD WORKING LOAD WORKING LOAD WORKING LOAD WORKING LOAD WORKING LOAD WORKING LOAD WORKING LOAD WORKING LOAD WORKING LOAD WORKING LOAD WORKING LOAD WORKING LOAD WORKING LOAD WORKING LOAD LADDER TYPE Thedesignationthatidentifiestheworkingload. WORKING LOAD Themaximumappliedload,includingtheweightoftheuser,materials,andtools whichtheladderistosupportfortheintendeduse. DUTY RATING Thecombinationoffactors,including,butnotlimitedto,laddertypesanddesign features,whichimplyservicecapability. STEP STOOL with WIDE TOP Easy to use. Very practical and portable. Safety anti-slip treads and feet. Each step protected with plastic covers. Model No. Working Load Weight (lbs) Height (ft) TW-60 (2 steps) TW-80 (3 steps) 2 3 225 lbs 225 lbs 5 8 PLATFORM SIDE HAND-RAIL PLATFORM TOOL TRAY lbs 26 26 on the Tool Tray MAXIMUM WORKING LOAD Web : www.laddersolutionsusa.com Email : [email protected] Phone : (775) 229 2329

Brosur Tangga TIVOLI 2015 back - Ladder Solutions USA

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Brosur Tangga TIVOLI 2015 back - Ladder Solutions USA

The information contained in this chart and the actual specifications are subject to change without notice and should not be considered as a commitment by supplier.

Manufactured to Exceed Performance Tests of ANSI & AS / NZ Standards

Manufactured by : PT. INDAL ALUMINIUM INDUSTRY Tbk.

L

DOUBLE SIDED STEP LADDERSafety anti-slip treads and feet.Identical front and back sections.Double braced on top and bottom steps.Two piece extruded top.Diagonal spreader bars prevent walking.

ModelNo.

WorkingLoad

Weight(lbs)

Height(ft)

TRDS2DTRDS3DTRDS4DTRDS5DTRDS6DTRDS7DTRDS8D

2345678

300 lbs300 lbs300 lbs250 lbs250 lbs250 lbs250 lbs

691014151922

Non conductive side rails.Safety anti-slip treads and feet.Double braced top and bottom steps.Red copolymer tool tray top with paint can hook.Diagonal spreader bars prevent walking.

SINGLE SIDED STEP LADDER

ModelNo.

WorkingLoad

Weight(lbs)

Height(ft)

TRDSF5TRDSF6TRDSF7TRDSF8

5678

250 lbs250 lbs250 lbs250 lbs

14172022

DUAL PURPOSE “UP n UP” LADDER

Full width rear section for greater stability.Solid rivet construction for greater durability.Aluminum components anodized for increased corrosion resistance.Red Copolymer top with paint can hook.Locking spreader bars increase stiffness.Lock & release clips.

ModelNo.

WorkingLoad

Weight(lbs)

Height(ft)

TRDDPF6TRDDPF7

6 to 107 to 12

250 lbs250 lbs

2024

EXTENSION LADDERNon conductive side rails.Safety anti-slip treads and feet.Bottom braced rung.Automatic ladder lock.Control ropes at sides to avoid tangling.Polycarbonate end caps on all end sections.Pole V-rung with rubber pad.

ModelNo.

WorkingLoad

Weight(lbs)

Height(ft)

TRDXF14TRDXF18TRDXF22TRDXF26

8 to 1410 to 1812 to 2214 to 26

250 lbs250 lbs250 lbs250 lbs

26334046

DOUBLE SIDED STEP LADDER

Non conductive side rails.Identical front & back.Diagonal spreader bars prevent walking.Plated steel semi tubular rivet construction.Double braced top & bottom steps.Anti-slip feet.

ModelNo.

WorkingLoad

Weight(lbs)

Height(ft)

TRDSF3DTRDSF4DTRDSF5DTRDSF6DTRDSF7DTRDSF8D

345678

300 lbs300 lbs250 lbs250 lbs250 lbs250 lbs

101317202427

Wide work surfaceStrong & durableLarge work platformWorking load limit 500 lbs per 13’ span

ALUMINUM PLANK

0.7 x 0.2 x 10’0.7 x 0.2 x 13’0.7 x 0.2 x 16’0.7 x 0.2 x 20’

27364554

AP 3AP 4AP 5AP 6

Weight(lbs)

Dimension(ft)

ModelNo.

3 piece strong rung joint for anti-twist performance.Safety anti-slip treads and feet.Double braced on top and bottom steps.Red copolymer tool tray top with paint can hook.Diagonal spreader bars prevent walking.

SINGLE SIDED STEP LADDER

ModelNo.

WorkingLoad

Weight(lbs)

Height(ft)

TRDS4TRDS5TRDS6TRDS7TRDS8

45678

300 lbs250 lbs250 lbs250 lbs250 lbs

910111316

DUAL PURPOSE “UP n UP” LADDER

Full width rear section for greater stability.Anodized for increased corrosion resistance.Locking spreader bars increase stiffness.Lock & release clips.Red Copolymer top with paint can hook.Solid rivet construction for greater durability.

ModelNo.

WorkingLoad

Weight(lbs)

Height(ft)

TRDDP5TRDDP6TRDDP7

5 to 86 to 107 to 12

300 lbs250 lbs250 lbs

101214

Heavy Duty “I” beam styles.Comfortable “D” rung used.Safety anti-slip treads and feet.Same width base and fly sections.Ladder lock at top prevent tripping.Control ropes at sides to avoid tangling.

EXTENSION LADDER

ModelNo.

WorkingLoad

Weight(lbs)

Height(ft)

TRDX16TRDX18TRDX22

10 to 1611 to 1812 to 22

250 lbs250 lbs250 lbs

283034

STRENGTH MULTI PURPOSE LADDER

Adjustable, self locking hinge (3 positions).Slip resistant rungs.Splayed end sections for greater stability.Anodized for increased corrosionresistance.

TRDMP13Assembled

Weight(lbs)

24

Height(ft)

7 to 13

LoadRating

250 lbs

ModelNo.

ModelNo.

TRDMP13Assembled

ExtensionLadder

13ft

StepLadder

7ft

ModelNo.

TRDMP13Assembled

ScaffoldLadder

3ft

Storage(folded)

3ft

WORK PLATFORMSafety anti-slip platform, step, treads & feet.Multi purpose trade work platform.Steel hinge, brace and lock.Strong, durable, easy to use and store.Available in fibreglass rail ( TRDWP60F ).

Height(ft)

2222

Weight(lbs)

9161313

ModelNo.

1. TRDWP30 (Alum.) 2. TRDWP45 (Alum.) 3. TRDWP60 (Alum.) 4. TRDWP60F (Fibre.)

1 x 21.5 x 42 x 22 x 2

Platform Dim.(ft)

ModelNo.

1. TRDWP30 (Alum.) 2. TRDWP45 (Alum.) 3. TRDWP60 (Alum.) 4. TRDWP60F (Fibre.)

WorkingLoad

250 lbs250 lbs250 lbs250 lbs

SLIMLINE PLATFORM LADDER

Special slim ladder with wide platform.Strong construction with aluminum hinge and connection between steps.Saves space, thick 1.7inch, easy to store.Safety anti-slip treads and feet.

13161825

ModelNo.

PlatformHeight

Weight(lbs)

WorkingLoad

TRDP5/2TRDP6/3TRDP7/4TRDP8/5

2345

250 lbs250 lbs250 lbs300 lbs

COMPACT SLIM LADDERStrong construction with nylon hinge at top and steel connecting rod between steps.Easy to store, save space, very practical andportable.Special slim ladder, 1.7” thick only.Safety anti-slip treads and feet.

Weight(lbs)

ModelNo.

Height(ft)

WorkingLoad

710

TS-52 (2 steps)TS-80 (3 steps)

23

225 lbs225 lbs US Patent

N0 6.347.687

1.7 inch

SINGLE FUNCTIONLADDER WITH RAIL

Safety anti-slip treads and feet.Stable and easy to use.Tubular safety rail at top.Each step protected with plastic covers

ModelNo.

2 5TT-60

(2 steps) 225lbs

3 7TT-80

(3 steps) 225lbs

4 8TT-110

(4 steps) 225lbs

Height(ft)

Weight(lbs)

WorkingLoad

FOR USE WITH PROP AND PROPF PLATFORM LADDERS

PlatformGateLock

PLATFORMGATE

500500LbsLbsW O R K I N G L O A DW O R K I N G L O A DW O R K I N G L O A D

W O R K I N G L O A DW O R K I N G L O A DW O R K I N G L O A D W O R K I N G L O A DW O R K I N G L O A DW O R K I N G L O A D W O R K I N G L O A DW O R K I N G L O A DW O R K I N G L O A D W O R K I N G L O A DW O R K I N G L O A DW O R K I N G L O A D W O R K I N G L O A DW O R K I N G L O A DW O R K I N G L O A D

LADDER TYPEThe�designation�that�identifies�the�working�load.

WORKING LOADThe�maximum�applied�load,�including�the�weight�of�the�user,�materials,�and�toolswhich�the�ladder�is�to�support�for�the�intended�use.

DUTY RATINGThe�combination�of�factors,�including,�but�not�limited�to,�ladder�types�and�designfeatures,�which�imply�service�capability.

STEP STOOL with WIDE TOPEasy to use.Very practical and portable.Safety anti-slip treads and feet.Each step protected with plastic covers.

ModelNo.

WorkingLoad

Weight(lbs)

Height(ft)

TW-60 (2 steps)TW-80 (3 steps)

23

225 lbs225 lbs

58

PLATFORM SIDE

HAND-RAIL

PLATFORM TOOL TRAY

lbs2626

on the Tool Tray

MAXIMUM

WORKING LOAD

Web : www.laddersolutionsusa.comEmail : [email protected]

Phone : (775) 229 2329