Technical Specification AXERA D05-126 (H)6-221 S-E2003-01-22

APPLICATION

The Tamrock Axera D05-126 is a single boom electrohydraulic jumbo for mining development in crosssections up to 38 m².

The robust universal boom have a large optimumshaped coverage, 360° rotation and full automaticparallelism for fast and easy face drilling. The boom canalso be used for cross-cutting and bolt-hole drilling.

The jumbo layout is designed for good visibility andbalance, this and the powerful four-wheel-drivearticulated carrier ensure fast and safe manoeuvering innarrow drifts.

The high performance drilling system allows high drillingperformance with good drill steel economy and highmachine reliability.

The operator environment and added automaticfunctions allow the operator to concentrate on safe, fastand accurate drilling.

All the service points are well protected but easy toaccess.

MAIN SPECIFICATIONS

Carrier 1 x CB 05Rock drill 1 x HL 510 S-38Boom 1 x B 26 FFeed 1 x TF 500Length 11 420 mmWidth 1 750 mmHeight roof down 2 100 mm

roof up 3 020 mmTurning radius 5 220 / 2 980 mmTramming speed horizontal 12 kph

13%=1:7=8° 5 kphGradeability, maxi 35 %Noise level < 98 dB(A)Weight 11 000 kg

1/4

Technical Specification AXERA D05-126 (H)6-221 S-E2003-01-22

ROCK DRILL

Model HL 510 S-38Standard male shank R 38Weight 130 kgImpact frequency 59 HzPercussion pressure 175 barImpact power 16 kW

FEED

Model TF 500Drill steel H 32 - H 35

FEED ALTERNATIVE

Model TTF 500Type TelescopicSteel length 6/10 to 12/16 ftDrill steel H 32 - H 35

BOOM

Model B 26 FType Parallel holdingWeight (with hoses) 1 900 kgFeed roll-over 360°Boom extension 1 200 mmFeed extension 1 600 mm

HYDRAULIC CONTROL SYSTEM

Type THC 560Control functions

-Power control Adjustable full powerAdjustable collaring power

- Rotation control Adjustable rotation speedReversible rotation

- Flushing control Water flushingAutomatic functions

Collaring, stop-and-return, anti-jamming, flushing

ELECTRO HYDRAULIC POWER PACK

Electrical motor 45 kW (60hp)Hydraulic pump types

- Percussion, feed & boom Axial pistonvariable displacement

- Rotation Gear

TF 500 500x10 500x12 500x14 500x16

Total length (mm) 4660 5270 5880 6490

Drill steel length (mm) 3090 3700 4305 4915

Hole depth (mm) 2830 3440 4050 4660

Net weight (kg) 470 500 530 560

Feed force, max. (kN) 25 25 25 25

2/4

GENERAL DIMENSIONS

320

6250

1350 1400 2550

1980

2100

920

1550

150

All dimensions in mm

Overall Length

TF 500 x 10 10 855TF 500 x 12 11 180TF 500 x 14 11 195TF 500 x 16 12 250

Technical Specification AXERA D05-126 (H)6-221 S-E2003-01-22

CARRIER

Model CB 05Diesel engine Deutz BF4L 2011, 55 kW (74hp)

- Exhaust CatalyserAutomotive hydrostatic transmissionTransfer case Drop gear Clark-HurthAxles, Front & Rear Case New Holland D45

- Oscillation Rear axle, 2 x 6°- Tyres 12.00 x 20

Steering Frame steering, 2 x 37°Brakes

- Service Hydrostatic transmission- Emergency & parking Hydraulic oil immersed

multiple disc brakes on both axlesStabilizers 2 hydraulic jacks, front

2 hydraulic jacks, rearSafety canopy Hydraulic, FOPS-ROPS

- Lowering capability 920 mmFuel tank 80 litreHydraulic tank 145 + 50 litre

AIR CIRCUIT

Compressor C.T. 10, screw type- Capacity 1.0 m³ at 7 bar

Electric motor 7.5 kW (10 hp)

WATER CIRCUIT

Water booster pump W.B.P. 2, centrifugal- Capacity 4000 l/h at 15 bar- Electric motor 4 kW (5.5 hp)

Oil cooler OW 30, water-actuated counterflow- Cooling capacity 30 kW

ELECTRICAL SYSTEM

Total installed power 63 kWHigh / Low voltage Separate cabinetsVoltage Standard 380 - 660 V

Alternative 1 000 VFrequency 50 or 60 HzStarting method Star / DeltaCable reel CRC type

- Capacity 100 m of cable 32 mm O.DLighting

- Working lights 2 x 150 W, 24 V- Tramming lights 4 x 70 W, 24 V

(the 2 front lights are also used as working lights)

FULL DIESEL VERSION AVAILABLE

Water-cooled engine Deutz BF4M 1012 C- Max. rating at 2300 rpm 74 kW (100 hp)

Fuel tank capacity 240 litreCompressor & water pump driven by hydraulic motorsTotal machine weight 10 500 kg

3/4

TRAMMING DIMENSIONS

17502900

2950

MINI OPERATING SECTIONTURNING RADIUS

320

6250

2750 2550

1980

2100

All dimensions in mm

Overall Length

TF 500 x 10 10 855TF 500 x 12 11 180TF 500 x 14 11 195TF 500 x 16 12 250

37°

32005220

Technical Specification AXERA D05-126 (H)6-221 S-E2003-01-22

SANDVIK TAMROCK SECOMA S.A., B.P. 46 - 69881 Meyzieu Cedex, FranceTel. + 33 4 7245 2200 Fax + 33 4 7831 7980

DRILLING SYSTEMDrill angle measuring instrument TMS D2.Air flushing.*) Double flushing (air/water) with CT 10 compressor.Air mist flushing kit for auxiliary water/air connection.*) Front clamping head on drill feed.

BRAKESAdditional service brake on axles.Hand pump for manual brake release.

ELECTRICAL SYSTEM) 1 000 V electric power supply.Ground fault detector

- not applicable to 1 000 VElectric cable

- 380-460 V, 4 x 35 mm², ø 36 mm, 80 m length- 480-575 V, 4 x 25 mm², ø 32 mm, 100 m length- 660-690 V, 4 x 25 mm², ø 32 mm, 80 m length, direct start

*) Allen Bradley electrics.

CARRIERFume diluter.*) Electric oil filling pump.Hydraulic low oil level indicator and switch.Complete spare wheel.*) 4 Michelin X mine D2 instead of standard types.

OTHER OPTIONAL EQUIPMENTFire suppression system ANSUL, 6 nozzles.

Reverse alarm.

*) EU, UL, CSA, AUS norms package + local standards andregulations.

Automatic lubrication system (Lincoln) for both boom and carrier.

Central lubrication system.

Hook up for mine air network (IP5 air cleaner included).

*) Ni-Cr plated cylinder rods.

Manuals other than French/English language.

*) replaces standard component

4/4

www.tamrock.comSandvik Tamrock reserve the right to change this specificationwithout further notice

OPTIONAL EQUIPMENT

COVERAGE AREA

Axera D05-126 on jacks.

Auto-parallel coverage

Extra coverage with manual override

5180

5880

5510

6490

All dimensions in mm.