BRAKE CALIPERS - · PDF fileBRAKE CALIPERS - General Information CALIPER HANDING. ... A brake caliper designed for competition use must be lightweight yet ca

BRAKE CALIPERS

◘ GENERAL INFORMATION.◘ PRO 5000 ) .◘ FORMULA CAR.

◘ GT.◘ RALLY.

◘ TOURING CAR.◘ 2 PISTON.

◘ HISTORIC RACE.◘ ROADCAR.

◘ TECHNICAL INFORMATION.◘ REPLACING CALIPER SEALS.

◘ SPARE PARTS.

4

+44 (0)24 7663 9595

4

INTRODUCTION.For over 50 years AP Racing has been a world leader in the technology and manu-facture of motorsport and high performance brake calipers. During this period many of the world’s pre-mier races and championships have been won using AP Racing braking systems. With one of the most comprehensive ranges available, AP Racing can offer a brake caliper suitable for every category of motorsport supplemented with a wide range of brake calipers to suit high performance road car applications for both OE and upgrade brake conversion kits. The AP Racing caliper range has been separated into the following groups to aid selection: PRO 5000 ), Formula cars, GT, Rally, Touring Cars, 2 Piston, Historic and Road Car. The calipers shown from pages 5 to 30 are the most popular calipers selected from the extensive AP Racing range and will provide the solution to most if not all applications. The standard calipers benefit from a more competitive price structure coupled with preferential delivery times. Specialist caliper ranges such as those used in Formula One are not shown in this catalogue. The complete range however includes many other options and the majority can be found on www.apracing.com, so if you require a caliper not illustrated please contact AP Racing for information on availability, price and delivery.

BRAKE CALIPERS - General Information

CALIPER HANDING.- Calipers are available to suit installation in front (Leading) or behind (Trailing) the axle. - The following abbreviations are used in this publication:-◘ RHT = Right Hand Trailing. ◘ LHT = Left Hand Trailing.◘ RHL = Right Hand Leading. ◘ LHL = Left Hand Leading.- Bleed screws must always be positioned at the top.- Discs must always pass the small piston first on differential bore calipers.- Cross over pipes must always be positioned at the bottom.

STANDARD CALIPER FEATURES.◘ Differential Bores and/or piston positioning are used on all AP Racing multi-piston calipers to combat pad taper.◘ High Temperature Seals are standard on all AP Racing race (com-petition) calipers.◘ Hard Anodised Surface Treatment is standard on all AP Racing com-petition calipers for optimum durability. (Except iron calipers and where indicated).◘ Road Calipers have a high performance paint fi nish applied on top of the hard anodising for maximum durability and protection against road salts.◘ Radial Mount fi xings are standard unless indicated otherwise.◘ All AP Racing Road calipers have piston dirt seals to protect against ingress of harmful debris.◘ Where fi tted all Bridge Pipes on AP Racing calipers are stainless Steel.◘ Most AP Racing calipers are fi tted with replaceable Steel Wear Plates to protect pad and caliper body.

CALIPER, SEALS & TEMPERATURE.Because race Brake Calipers are sometimes subjected to very high and unpredictable operating temperatures, they must be examined and seals must be replaced on a regular basis to maintain effi ciency and safety. Seal life is governed by time at temperature which should therefore be kept as low as possible by provision of cooling airfl ow. For guidance only AP Racing offer the following recommendations (temperatures measured on outside of Caliper adjacent to logo):◘ Calipers that regularly run at up to 200°C – Re-seal every other event.◘ Calipers that run intermittently from 200°C to 220°C and above – Re-seal as soon as possible. ◘ Reduce “soak” temperatures after the car has come to rest where possible (e.g. do not leave foot on brake pedal when stationary with hot brakes) as this can cause excessive caliper temperatures.

DESIGN & DEVELOPMENT.The whole process of design and development is carried out at our headquarters in Coventry. With our two brake dynomometers we are able to reproduce the most de-manding test environments. AP Racing designers use the latest technologies to produce some of the most aesthetic and effective brake calipers at the affordable prices the markets request.

Radi-CAL™Developed in 2007, this break from traditional design

concepts has allowed AP Racing to lead the way in brake caliper design and manufacture, producing over 80 different variants for a cross selection of motorsport categories. Radi-CAL™ enabled AP Racing to take a fresh look at how the design envelope could be used and based it’s qualities around making calipers lighter, stiffer and run cooler, therefore making them more aesthetic to the eye.

ROAD OR RACE ?It is important to choose the correct type of brake caliper for the intended application. The design requirements for a brake caliper to be used on the public highway (Road) and for competition use are significantly dif-ferent. A road caliper often has to go for long periods without servicing or maintenance therefore corrosion protection and durability are primary considerations. A brake caliper designed for competition use must be lightweight yet ca-pable of operating reliably at high temperatures, however it is normally cleaned and serviced very frequently. AP Racing produce brake calipers optimised for these two very different applications. Although generally de-rived from our racing calipers all AP Racing road calipers have a protec-tive paint finish, wiper (dirt) seals or boot Seals to prevent dirt ingress and are of a heavier construction than calipers intended solely for competition use. We strongly recommend that only purpose designed ‘Road’ calipers are used on vehicles intended for regular use on the public highways.

PART NUMBERING SYSTEM.An explanation of a Brake Caliper part number;

No. Explanation Description1. Caliper Family No. Base Caliper No.

2. Stroke No. Even No. = Right hand caliper.Odd No. = Left hand caliper.

3. Position of inlet Adaptor. S = Sidefeed. / E = Endfeed.4. Anti-knockback Spring. 0 = No spring. / 4 = 4lbs. / 7 = 7lbs / 9 = 9lbs.

5. Piston Material. No character = Aluminium Alloy.L = Stainless Steel. & M = Titanium.

6 & 7 Options.C = Pistons fitted with caps.P = Pistons can accept caps.D = Cooling duct supplied.

C P 6 1 6 0 - 2 S 7 M P D1.

2.

3.

4.

5.

6.

7.

SERVICING AND RECONDITIONING.◘ Regular examination and maintenance of brake calipers is essential to maintain safety and effi ciency of operation. ◘ AP Racing recommend that brake calipers should be cleaned with soapy water only, as this will not damage any of the seals.A complete reconditioning service is available.◘ Seal repair kits and other spare parts e.g. pistons, bleed screws etc, are also available and can be identifi ed by referring to the individual caliper information or the tables on pages 34 to 39.◘ Other spare parts e.g. pistons, bleed screws, pad retainers are also available by referring to individual caliper details◘ Replacement seals should be soaked in brake fl uid for 30 minutes prior to fi tment.◘ For more information please contact AP Racing.

DRY BLEED SYSTEMS (DRY BREAKS).A Dry Bleed System has been designed for use with any AP Racing calipers suitable for ‘O’ Ring sealed bleed screws. The male dry bleed valve is fi tted in place of the bleed screw, once fi tted there should be no need to loosen or remove the coupling unless it is being replaced. For detailed information please go to page 91.

5

www.apracing.com

5

BRAKE CALIPERS - PRO 5000 )

INTRODUCTION.Pro 5000) is a new entry level option of Radi-CAL™ brake calipers, designed as the next generation of our popular Pro 5000 branded ranges.

Pro 5000) has been developed from our experience in all areas of motorsport, the new forged designs feature the latest innovations from of our pioneering asymmetric design concept.Manufactured with the same ideology as Pro 5000+ this entry level motorsport range offers the same costing benefi ts but will not directly replace Pro 5000+. It should be noted that there are dimensional differ-ences between + and R ranges and all installations require checking before specifying.

◘ The range consists of Four caliper variants and 7 different discs, which cover 6 & 4 piston calipers and ventilated discs from Ø390mm to Ø330mm and 36mm down to 28mm thickness.

◘ The three caliper variants are based on radially mounted two piece forged aluminium calipers and are fi tted with 4lb anti-knockback springs (where applicable) with stainless steel pistons on all.

◘ All calipers run full depth pads.

◘ The discs are available with a curved grooved face confi guration only.

◘ The main objective of the range is to provide a high quality “off the shelf” Radi-CAL™ brake system at a competitive price. The range will be kept to the part numbers listed in this catalogue and no variations are available.

◘ Alternative strength anti-knockback springs are available, please refer to AP Racing for details.

◘ This section provides the basic installation dimensions for both the calipers and the discs, if further information is required please contact AP Racing Technical Section.

NOTE. All dimensions in (mm) unless otherwise stated.

PRODUCT COMBINATIONS.The information below offers brief details / dimensions on the range of calipers, discs, and brake pad families.

TECHNICAL SPECIFICATIONPiston Sizes Ø36.0mm x 2

Ø41.3mm x 2Piston Area 47.12cm²

Weight - No Pads 2.16KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 152.0mmMtg offset 44.0mmMtg hole Ø 12.15mm‘PL’ Dimension 57.8mm

SPARE PARTSØ36 Piston CP9440-107Ø41.3 Piston CP9440-106Seal Repair Kit CP8518-HKTub Pad Retainer CP9440-110RH - Wear Plate CP9440-108LH - Wear Plate CP9440-109Bleed Screw Kit CP3880-1

PAD INFORMATIONPad Family CP3215D50Pad Area 57.4cm²Pad Volume 70.44cm³Pad Thickness 16.8mm

INSTALLATION DRAWING

BRAKE DISC INFORMATION

CP9440 4 Piston, Radi-CAL™

TYPICAL APPLICATION◘ Budget general competition use.

FEATURES◘ Radial mount, 152 x 44mm ctrs.◘ Benefi ts from a radical asym-metric design concept.◘ Superior dynamic performance.◘ Increased stiffness.◘ Forged, two piece Aluminium alloy body.◘ Suits Ø330 / Ø315mm x 28mm discs.◘ Stainless Steel pistons fi tted.◘ Stainless Steel wear plates.◘ Smaller bore version for rear applications available - CP9441 Family - See Website for details.

PART NUMBERS- RH, CP9440-2S4L. - LH, CP9440-3S4L.

CALIPER HANDINGFor handing information check Installation drawing at:www.apracing.com

Caliper Part Numbers.

Caliper Dim’n (mm) Pad Part No.

Disc Options (mm)Mtg

Centers Offset PL Ø Thick Example Part No.

4 Piston Calipers

CP9440-2/3S4L &CP9441-2/3S4L

152.0 44.0 57.8 CP3215D50

330 28 CP5000-210/-211CG8

330 28 CP3580-2898/-2899CG8

315 28 CP5000-220/-221CG8

6 Piston Calipers

CP9660-2/3S4L 180.0 42.0 63.5 CP3905D54

378 36 CP5772-1032/-1033CG8

356 32 CP5000-218/-219CG8

CP9665-2/3S7L 210.0 42.0 63.5 CP6230D54

390 36 CP4284-135/-135CG8

378 32 CP5772-1030/-1031CG8

- Part Number. CP5000-210/1CG8 CP3580-2898/9CG8 CP5000-220/1CG8- Diameter. Ø330.0 Ø330.0 Ø315.0- Thickness. 28.0 28.0 28.0- PCD. Ø203.2mm Ø203.2mm Ø177.8mm- Eye Diameter Ø227.4mm Ø230.0mm Ø210.3mm- Inside Flange Ø. Ø185.0mm Ø190.0mm Ø164.3mm- Flange Thickness. 5.1mm 5.6mm 5.95/6.10mm- Mounting Holes. 12 12 12- Mounting Hole Ø. 6.4mm 6.4mm 6.4mm- Airgap. 15.25mm 14.0mm 14.0mm- No of Vanes. 36 48 36- Disc Weight. 4.94Kg 5.94Kg 5.6Kg- Face Depth. D50 D50 D52

Note: Drawing for guidance only. Download latest issue installation drawing from www.apracing.com

18

4.0

0

67.50

40.60

43.00

10

7.5

01

10

.30

16

3.0

0

11

9.0

0

58.80

14

0.1

0 (

EFFEC

TIV

E R

AD

IUS)

RADIAL PROFILESCALED FOR A Ø330.2 DISC

12.2012.10

1.0

0x4

5°

MIN

(4 P

LAC

ES)

38

.50

10

7.3

0 (

U D

IM'N

)5

7.8

0 (

PL

DIM

'N)

1.62541.28

(TRAILING PISTON)

36.00(LEADING PISTON)

129.32 (REF)132.50 (REF)

152.00

21.00

HYDRAULIC INLETM10x1.0

10

.00

44

.00

BLEED SCREW TIGHTENINGTORQUE 17.0 Nm (12.5 Lbs ft)

PAD RETAINING BOLT SHOULD BETIGHTENED TO A TORQUE OF 13.1Nm(9.7 Lbs ft)

TYPICAL MTG TIGHTENINGTORQUE FOR GUIDANCE ONLY:M12 - 65Nm & M10 - 54Nm

R167.60 P

ATHW

AYRADIU

S

NewProductavailable

early 2015

NewProductavailable

early 2015

http://www.apracing.com/drawings/cp9440-1cd%20-%20Iss%203.pdf

6

+44 (0)24 7663 9595

6

BRAKE CALIPERS - PRO 5000 )

Note: Drawing for guidance only. Download latest issue installation drawing from www.apracing.com Note: Drawing for guidance only. Download latest issue installation drawing from www.apracing.com

PAD INFORMATION - Pad Family = CP3894D46- Pad Area = 66.9cm²- Pad Depth = 46.0mm- Pad Thickness = 18.0mm


VENTILATED BRAKE DISC INFORMATION

TECHNICAL SPECIFICATION

Piston SizesØ27.0mm x 2Ø31.8mm x 2Ø38.1mm x 2

Piston Area 50.1cm²Weight No Pads 2.78KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 180.0mmMtg offset 42.0mmMtg hole Ø 12.15mm‘PL’ Dimension 63.5mm

SPARE PARTSØ27.0 Pistons CP9660-114Ø31.8 Pistons CP9660-115Ø38.1 Pistons CP9660-116Seal Repair Kit CP8518-CEJ

AKB Spring kit. - CP6518-4LBSSLPad Retainer - CP9660-113 x 2Ret/Bolt P/No. - CP3796- 121STRH - Wear Plate CP9660-110LH - Wear Plate CP9660-111Bleed Screw Kit CP3880-1



VENTILATED BRAKE DISC INFORMATION- Part Number. CP5772-1032/-1033CG8 CP5000-218/-219CG8- Diameter. Ø378.0 Ø356.0- Thickness. 36.0 32.0- PCD. Ø240.0 Ø228.6- Eye Diameter Ø266.0 Ø250.4- Inside Flange Ø. Ø215.0 Ø214.0- Flange Thickness. 5.6mm 5.3mm- Mounting Holes. 12 - Floating 12- Mounting Hole Ó. Bobbin - CP2494-589MJ 6.4mm- Airgap. 20.0mm 19.5mm- No of Vanes. 72 48- Disc Weight. 7.4Kg 6.5Kg- Face Depth. D56 D53

- Part Number. CP4284-134/-135CG8 CP5772-1030/-1031CG8- Diameter. Ø390.0mm Ø378.0mm- Thickness. 36.0mm 32.0mm- PCD. Ø260.0mm Ø240.0mm- Eye Diameter Ø278.75mm Ø266.8mm- Inside Flange Ø. Ø235.0mm Ø215.0mm- Flange Thickness. 6.80/6.85mm 5.6mm- Mounting Holes. 12 - Floating 12 - Floating- Mounting Hole Ø. Bobbin - CP2494-589MJ Bobbin - CP2494-589MJ- Airgap. 21.0mm 20.0mm- No of Vanes. 84 72- Disc Weight. 8.7Kg 7.2Kg- Face Depth. D54 D56

CP96606 Piston, Radi-CAL™ - 180mm ctrs

CP96656 Piston, Radi-CAL™ - 210mm ctrs


FEATURES◘ Radial mount, 180 x 42mm ctrs.◘ Benefi ts from a radical asymmet-ric design concept.◘ Superior dynamic performance.◘ Increased stiffness.◘ Forged, two piece Aluminium alloy body.◘ Suits disc up to Ø380 max / Ø356 min x 36 or 32mm thickness.◘ Internally ported.◘ Stainless Steel pistons fi tted.◘ Stainless Steel wear plates.

PART NUMBERS- RH, CP9660-2S4L.- LH, CP9660-3S4L.



R192.50

40

.00

0.5

0 x

45

2 P

LAC

ES

12.2012.10

1.0

0 x

45

°2

PLA

CES

[1.06]26.99(LEADING BORE)

[1.25]31.75(MIDDLE BORE) [1.50]38.10

(TRAILING BORE)

138.9 (REF) 138.9 (REF)

63

.50

(P

LD

IM'N

)U

DIM

'N

180.00

21.00SFACE

10.00 -M10x1.0 HYDRAULIC INLET

42

.00

CA

LIP

ER

OFFSET

TYPICAL MTG TIGHTENINGTORQUE FOR GUIDANCE ONLY:M12 -65Nm

PAD RETAINING BOLTS SHOULD BETIGHTENED TO A TORQUE OF 13.1Nm (9.7lb ft)

BLEED SCREWTIGHTENING TORQUE17.0Nm (12.5lb ft)

71.80

62.5049.50

91.21

16

0.0

0EFFEC

TIV

E R

AD

IUS

18

1.5

021

0.5

0

18

0.0

0

12

7.0

0

58.50

71.80

CL DISC & WHEEL

RADIAL PROFILE TO SUIT AØ378 DISC


Piston SizesØ27.0mm x 2Ø31.8mm x 2Ø38.1mm x 2

Piston Area 50.1cm²Weight No Pads 3.1KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 210.0mmMtg offset 42.0mmMtg hole Ø 12.25mm‘PL’ Dimension 63.5mm

SPARE PARTSØ27.0 Pistons CP9665-114Ø31.8 Pistons CP9665-115Ø38.1 Pistons CP9665-116Seal Repair Kit CP8518-CEJ

AKB Spring kit. - CP6518-7LBSSLPad Retainer - CP9665-119 x 2Ret/Bolt P/No. - CP3715-117STRH - Wear Plate CP9665-112LH - Wear Plate CP9660-113Bleed Screw Kit CP3880-1



FEATURES◘ Radial mount, 210 x 42mm ctrs.◘ Benefi ts from a radical asymmet-ric design concept.◘ Superior dynamic performance.◘ Increased stiffness.◘ Forged, two piece Aluminium alloy body.◘ Suits Ø390/362 x 36/32mm discs.◘ Internally ported.◘ Stainless Steel pistons fi tted.◘ Stainless Steel wear plates.



R197.5 DISCPATHWAY

63

.5 (

PL

DIM

'N)

37

.7

27.0 [1.06"](LEADING BORE)

31.75 [1.25"](MIDDLE BORE) 38.1 [1.5"]

(TRAILING BORE)

'U' D

IM'N

2822UPRIGHT

INTERFACE

155 REF 152 REF86.040.055.0

102.0

16

8.0

EFFEC

TIV

E R

AD

IUS

R1

94

.0R

21

6.0

R2

06

.0

R1

38

.0

50.0

R1

37

.0

R1

43

.5

R25R30

CL DISC & WHEEL

NOMINAL RADIALPROFILE TO SUIT AØ390 DISC

21.0SFACE

210.0 CTRS.

12.312.2

HYDRAULIC INLET M10x1.0

42

.0 O

FFSET

TYPICAL MTGTIGHTENING TORQUEFOR GUIDANCE ONLY:M12 -65Nm


NewProductavailable

early 2015

NewProductavailable

early 2015

151.90 (5.98")

57

.4 (

2.2

5")

162.9 (6.41”)

68.6

0(

”)

2.7

068.6

0(

”)

2.7

0

https://www.apracing.com/drawings/CP9660-1CD.pdf

http://www.apracing.com/drawings/CP9665-1CD.pdf

7

www.apracing.com

7

BRAKE CALIPERS - Formula Cars

TECHNICAL SPECIFICATIONPiston Sizes Ø34.9mm

Ø41.3mmPiston Area 45.92cm²Disc Diameter Ø280.0mmDisc Thickness-2 /-3 /-4/ -5 25.4mm-8 /-9 / -10 /-11 20.0mmWeight No Pads 1.6KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 152.0mmMtg offset-2 /-3 /-4/ -5 30.0mm-8 /-9 / -10 /-11 27.3mmMtg hole Ø 10.2mm‘PL’ Dimension 50.5mm

SPARE PARTSPistonsØ34.9mm CP3567-114Ø41.3mm CP4270-3Seal Repair Kit CP4518-GKPad Retainer BoltRetainer P/No. See page 35.

for detailsRet / Bolt P/No.Wear Plates

AKB Spring Kit CP6518-4LBLL

Bleed Screw CP3720-173Fluid Pipe-2 /-3 /-4/ -5 CP4567-6-8 /-9 / -10 /-11 CP4567-7



Disc W1 W2 W3 W4 W5 W6 W7280 x 20.0 62.3 63.5 45.3 44.8 39.3 26.8 38.8280 x 25.4 65.0 66.2 48.0 47.5 42.0 29.5 41.5

CP45674 Piston, Cast Two Piece

112.5 112.5

DISC ROTATION

DISC PATHWAY RADIUS 142.5

DSCOUTSIDE

DIAMETER280.0MM

DISC & WHEEL C

DIM

N‘U

’5

0.5

DIM

N‘P

L’

26

.30 TOP OF

DISC & PADMATERIAL

10.2MTG HOLES

PAD RETAINING BOLT SHOULD BE TIGHTENEDTO A TORQUE OF 13.1Nm (9.7 Lb/ft)

MTG HOLE CENTRES 152.00

OFFSET

RA

DIU

S 8

9.0

MIN

RA

DIU

S 9

2.0

MIN

RA

DIU

S 1

43

.9 M

AX

RA

DIU

S 1

56

.6 M

AX

RA

DIU

S 1

54

.9 M

AX

RA

DIU

S 1

56

.5 M

AX

W6 MIN

W7 MAX

EF

FE

CT

IVE

RA

DIU

S 1

17

.85

R4.0

W2 MAX W1 MAX

W3 MAX W4 MAX

W5 MAX 30° 4.00

DISCWIDTH

33.0

0

IMPORTANT NOTEDISC & CALIPER MOUNTINGTOLERNCES TO BE SUCH THATDISC IS CENTRAL TO CALIPERTO WITHIN ±0.5MM

INLET PORTM10X1.0

CALIPER RADIALPROFILE (SCALEDON A Ø280 DISC)

L

TYPICAL APPLICATION◘ Front & Rear for 13” wheels.

FEATURES

◘ Radial mount, 152mm Mtg ctrs. ◘ Choice of three disc options.- Suits Ø280mm x 25.4 or 20.0mm discs.◘ Aluminium alloy body.◘ Aluminium pistons.◘ Single bolt pad retainer.

PART NUMBERS◘ To suit disc Ø280 x 25.4mm- RHT, CP4567-2S4- LHT, CP4567-3S4- RHL, CP4567-4S4- LHL, CP4567-5S4

◘ To suit disc Ø280 x 20mm- RHT, CP4567-8S4- LHT, CP4567-9S4- RHL, CP4567-10S4- LHL, CP4567-11S4

CALIPER HANDINGIt is important to select the correct ‘hand’ of caliper. See note on page 4 for guidance.

113.47 (4.47”)

52

.10

(2

.05

”)



CP5219 4 Piston, Billet Two Piece


Ø41.3mmPiston Area 45.92cm²Disc Diameter Ø280.0mmDisc Thickness 25.4mmWeight No Pads 1.98KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 152.0mmMtg offset 42.78mmMtg hole Ø 10.27mm‘PL’ Dimension 56.81mm

SPARE PARTSPistonsØ34.9mm CP2876-101Ø41.3mm CP2270-92Seal Repair Kit CP4518-GKPad Retainer BoltRetainer P/No. CP4219-122Ret / Bolt P/No. CP5100-126Wear Plates CP4219-107Bleed Screw CP3880-1Fluid Pipe CP5219-6


FEATURES◘ Radial mount, 152 x 42.78mm Mtg ctrs.◘ Suits Ø280.0 x 25.4mm ventilated Iron disc.◘ High grade Aluminium alloy body.◘ CNC machined from billet.◘ Lightweight.◘ Superior dynamic performance than that of CP4219◘ Aluminium pistons.◘ Stainless Steel wear plates.

PART NUMBERS- RHT, CP5219-16S0.- LHT, CP5219-17S0.- RHL, CP5219-18S0.- LHL, CP5219-19S0.




http://www.apracing.com/drawings/cp4567-1cd.pdf


jbennett

Note

Smaller versions of installation drawing have been added to certain sections of the 2015 catalogue. However full installation drawings are available to the majority of part numbers, and a button has been added to view them. Simply by pressing the (View Drawing) button you will access an A4 drawing in a separate window. To return to the catalogue, simply close the drawing window. Some Drawings have more than one part number and pages attached. This can be identified by looking at the bottom of the window at the page indictor.

8

+44 (0)24 7663 9595

8




Piston SizesØ26.92mmØ31.75mmØ36.00mm

Piston Area 46.8cm²Disc Diameter Ø280.0mmDisc ThicknessMax 31.0mmMin 28.0mmWeight No Pads 1.89KgHydraulic Thread 3/8” x 24UNFMounting Type RadialMtg centres 202.0mmMtg offset 30.0mmNom Mtg hole Ø 9.78mm‘PL’ Dimension 63.7mm

SPARE PARTSPistonsØ26.92mm CP6382-201Ø31.75mm CP6382-202Ø36.00mm CP6382-203Seal Repair Kit CP8518-BEHWear Plates x 4 CP6382-207Ctr Beam Wear Plate CP6382-205

AKB Spring Kit CP6518-7LBSSL

Bleed Screw Kit CP6382-9AVAILABLE OPTIONSDry Bleed CP6300-30

PAD INFORMATION - Pad Shape = PFC7940- Pad Depth = 40.5mm- Pad Thickness = 20.0mm

CP6382 6 Piston, Billet Radi-CAL™

TYPICAL APPLICATION◘ Formula Nippon.

FEATURES◘ Radial mount, 202 x 30mm ctrs.◘ Benefi ts from radical asymmetric design concept.◘ Superior dynamic performance. ◘ Billet Aluminium alloy body.- Nickel plated surface fi nish as standard.- Optional anodised fi nish available.◘ Designed to operate on Ø280 x 28 or 31mm Iron disc.- Also suitable for Carbon disc.◘ Internally ported.◘ Stainless Steel pistons.- Can accept piston caps.◘ Stainless Steel wear plates fi tted.

PART NUMBERS◘ For Nickel Plated Calipers.- RHT, CP6382-2S7LP.- LHT, CP6382-3S7LP.◘ For Anodised Calipers.- RHT, CP6382-6S7LP.- LHT, CP6382-7S7LP.


R154.6

R1

22

R1

78

50

NOMINAL RADIALPROFILE ON AØ278.0 DISC

DISCWIDTH

84

29.55R62

R10

R155

36°

BLEEDSCREWSARE FITTEDAS STANDARDTIGHTENING TORQUE 17Nm 202 NOM CTRS

30

NO

M

A

A

Ø36.00

Ø280 DISC

R141.80 DISC PATHWAY

Ø31.75

Ø26.92 A-A

Ø20 NOM

Ø2

0N

OM

Ø10.1510.10

132 NOM132 NOM

Ø16.50 NOMC’BORE Ø9.83

9.73

32

.2 N

OM

TO

TO

PO

F P

AD

MA

TE

RIA

L2

7 N

OM

31

.5 N

OM

76

.5 N

OM

TO

AX

LE

CL

164 NOM

50

NO

M





SPARE PARTSPistonsØ34.9mm CP5567-106Ø41.3mm CP5567-107Seal Repair Kit CP4518-GKWear PlatesPad x 4 CP5567-108Ctr Beam x 1 CP5567-109Bleed Screw Kit CP3880-1



FEATURES◘ Radial mount, 152.0 x 30.0mm ctrs.◘ Benefi ts from a radical asymmet-ric design concept.◘ Superior dynamic performance.◘ Increased stiffness.◘ Reduced weight.◘ Forged monobloc Aluminium alloy body.◘ Suits Ø280 x 25.4mm disc.◘ Aluminium alloy pistons.- Stainless Steel option available.◘ Stainless Steel wear plates.

PART NUMBERS◘ With Aluminium Pistons.- Right Hand, CP5567-2S4.- Left Hand, CP5567-3S4.◘ With Stainless Steel Pistons.- Right Hand, CP5567-2S4L.- Left Hand, CP5567-3S4L.


CP55674 Piston, Forged Radi-CAL™


113.47 (4.47”)

52.1

0 (2

.05”

)




jbennett

Note


9

www.apracing.com

9



CP7030 - 4 Piston, Two Piece Billet


Ø41.3mmPiston Area 45.92cm²Disc Diameter Ø278.0mmDisc ThicknessMax 17.0mmMin 16.0mmWeight No Pads 1.5KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 120.0mmMtg offset 40.0mmMtg hole Ø 10.2mm‘PL’ Dimension 50.3mm

SPARE PARTSPistonsØ34.9mm CP7030-108Ø41.3mm CP7030-107Seal Repair Kit CP4518-GKWear Plates CP7030-106Bleed Screw CP3720-173Fluid Pipe CP7030-6


TYPICAL APPLICATION◘ F3 Front & Rear.

FEATURES◘ Radial mount, 120 x 40mm ctrs.◘ Suits Ø278 x 17.0 / 16.0mm disc.◘ Aluminium alloy body, ◘ CNC machined from billet.◘ Lightweight.◘ Aluminium pistons.◘ Complete system (calipers, discs and bells) available.◘ Stainless Steel wear plates.



113.47 (4.47”)

52.1

0(2

.05”)




Ø31.8mmPiston Area 25.97cm²Disc Diameter Ø278.0mmDisc ThicknessMax 18.0mmMin 16.0mmWeight No Pads 1.2KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 120.0mmMtg offset 40.0mmMtg hole Ø 10.15mm‘PL’ Dimension 50.30mm

SPARE PARTSPistonsØ26.0mm CP7031-113Ø31.8mm CP7031-108Seal Repair Kit CP4518-AEWear PlatesPad x 4 CP3307-222Ctr Beam x 1 CP7031-106Bleed Screw Kit CP3880-1


103.0 117.50

Ø25.4LEADING BORE

Ø31.75TRAILING BORE

39

.30

0.6

0x4

5°

MIN

40

.00

DIRECTION OFDISC ROTATION

R141.30PATHWAY RADIUS

120.00

BLEED SCREWMAX TIGHTENINGTORQUE 17Nm

Ø10.2010.10

Ø18.00

88

.50

‘U’D

IM’N

50

.30

‘PL’D

IM’N

37.15 MAX

32.20 MIN62.65 MAX

R8

8.0

0M

IN

R9

8.0

0M

IN

R1

29

.50

MA

X

R1

43

.80

MA

X

R1

50

.15

MA

X

R1

56

.50

MA

X

R11

6.7

0M

IN

R1

23

.00

EF

FE

CT

IVE

RA

DIU

S

R1

47

.40

MA

X

30.00 MAX40.20 MAX

57.70 MAX

65.25 MAX

74.75 MAX

84.50 MAX

RADIAL PROFILESCALED FOR AØ277.8 DISC

HYDRAULIC INLETM10x1.0 x 10.00 FULL THREAD

CP70314 Piston, Billet Radi-CAL™

TYPICAL APPLICATION◘ Formula 3 Front & Rear.

FEATURES◘ Radial mount, 120 x 40mm ctrs.◘ Benefi ts from a radical asymmet-ric design concept.◘ Superior dynamic performance.◘ Increased stiffness.◘ Reduced weight.◘ Monobloc Aluminium alloy body.◘ Suits Ø278 x 18mm disc.◘ Stainless Steel pistons.◘ Stainless Steel wear plates. ◘ Complete system (calipers, discs bells and pads) available, overall corner weight 4.37kg.

PART NUMBERS- RH, CP7031-4S0LP.- LH, CP7031-5S0LP.




jbennett

Note


10

+44 (0)24 7663 9595

10




TECHNICAL SPECIFICATIONPiston SizesCP7606 Ø38.1mm x 4CP7613 Ø31.8mm x 4Piston AreaCP7606 45.6cm²CP7613 31.6cm²Disc DiameterMax Ø295.0mmMin Ø267.0mmDisc ThicknessCP7606 & CP7613-4 & -5 18.0mm

CP7613-6/7/8/9 20.7mmWeight No Pads 1.7KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 130.0mmMtg offsetCP7606 & CP7613-4 & -5 37.25mm

CP7613-6/7/8/9 38.70mmMtg hole Ø 10.2mm‘PL’ Dimension 53.0mm

SPARE PARTSPistonsCP7606 CP7605-109CP7613 CP7613-106Seal Repair KitCP7606 CP4518-JJCP7613 CP4518-EEPad Retainer PinRetainer P/No.CP7606 & CP7613-4 & -5 CP7605-108

CP7613-6/7/8/9 CP7613-112Wear Plates CP7605-116Bleed Screw Kit CP3880-1Fluid PipeCP7606 & CP7613-4 & -5 CP7606-10

CP7613-6/7/8/9 CP7613-10


CP7606 & CP7613 - 4 Piston

TYPICAL APPLICATION◘ Budget Formula Cars.

FEATURES◘ Radial mount, 130.0mm ctrs◘ Suits Ø295 / 267mm x 20.7 / 18mm thick disc.◘ Cast Aluminium alloy body.◘ Aluminium alloy pistons.◘ Pin pad retainer.◘ Stainless Steel wear plates.

PART NUMBERS◘ with Ø38.1mm bores.- RHT, CP7606-12S0- LHT, CP7606-13S0- RHL, CP7606-14S0- LHL, CP7606-15S0

◘ With Ø31.8mm bores.- To Suit 18.0mm disc- RHL CP7613-4S0 / - LHL CP7613-5S0

- To Suit 20.7mm disc- RHT, CP7613-6S0- LHT, CP7613-7S0- RHL, CP7613-8S0- LHL, CP7613-9S0


NOTE: CP7606 IS LIMITED TO 70 BAR MAXIMUM PRESSURE

Ø10.20Ø10.20 130.0 MOUNTING CENTRES130.0 MOUNTING CENTRES

37.2

5O

FF

SE

T

38.7

0O

FF

SE

T

CALIPER RADIAL PROFILE AS FITTED ON A Ø267.00 DISC

OFFSET FOR CP7606 & CP7613-2/3/4/5OFFSET FOR CP7613-6/7/8/9

15

6.0

0M

AX

138.4

0 M

AX

124.4

0 M

AX

117.4

0 M

AX

34.0 MAX

48.25 MAX54.9 MAX

R11 TYP.

59.9 MAX

62.4 MAX

14

7.0

0M

AX

54.9 MAX

59.9 MAX

13

8.4

0M

AX

12

6.7

0M

AX

100.5

0 M

IN85.4

5 M

IN82.4

5 M

IN

39.5 MAX

59.4 MAX 59.4 MAX

34.0 MAX

DISC ROTATION

'U'D

IMN

1.50" BORE(LEADING)

1.50" BORE(TRAILING)

114.00 112.50

DISC CL

DISC & WHEEL CL

'PL

'DIM

N5

3.0

0

41.9

0

10.1010.30

R150.00

PATHWAY RADIUS


CUSTOMER NOTES

jbennett

Note



11

www.apracing.com

11

BRAKE CALIPERS - GT / Endurance




Piston Area 50.1cm²Disc Diameter Ø378.0mmDisc ThicknessIron 36.0mmCarbon 35.0mmWeight No Pads 2.7KgHydraulic Thread M10 x 1.0Mounting Type RadialMtg centres 210mmMtg offset 42.0mmMtg hole Ø 12.2mm‘PL’ Dimension 63.5mm

SPARE PARTSPistonsØ27.0mm CP5260-109Ø31.8mm CP5260-110Ø38.1mm CP5260-111Seal Repair Kit CP4518-CEJ


Z Piece Pad Re-tainer Part No

RH- CP5095-112LH - CP5095-113

Wear Plates x 4 CP6075-105Bleed Screw kit CP3880-1


CP50956 Piston, Forged Radi-CAL™ FrontTYPICAL APPLICATION◘ All GT.

FEATURES◘ Radial mount, 210 x 42mm ctrs.◘ Benefi ts from radical asymmetric design concept.◘ Superior dynamic performance. ◘ Forged monobloc Aluminium alloy body ◘ Designed to operate on:- Ø378 x 36mm Iron disc or - Ø378 x 35mm Carbon disc.◘ Internally ported.◘ Stainless Steel pistons.◘ ‘Z’ Piece pad retainer.◘ 7lb Anti-knockback springs fi tted.

PART NUMBERS◘ To suit Iron Disc.- RHT, CP5095-2S7L.- LHT CP5095-3S7L.- RHL CP5095-4S7L.- LHL, CP5095-5S7L.

◘ To suit Carbon Disc.- RHT, CP5095-2S7LCA. - LHT, CP5095-3S7LCA.- RHL, CP5095-4S7LCA.- LHL, CP5095-5S7LCA.



TECHNICAL SPECIFICATIONPiston Sizes

CP6078Ø27.0mmØ31.8mmØ38.1mm

CP6077 Ø26.0mmØ27.0mmØ31.8mm

Piston AreaCP6078 50.1cm²CP6077 37.9cm²Disc Diameter Ø355.0mm

Disc Thickness Iron - 36.0mmCar - 35.0mm

Weight No Pads 2.25KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 210.0mmMtg offset 42.0mmMtg hole Ø 12.15mm‘PL’ Dimension 63.5mm

SPARE PARTSPiston-Ø26.0mm CP6057-104Piston-Ø27.0mm CP6055-110Piston-Ø31.8mm CP6055-111Piston-Ø38.1mm CP6055-112Wear Plates. x 4 CP6075-107Beam W/Plate CP6078-104Pad Supports CP6078-105Seal Repair Kit CP4518-CEJ


Dry-Bleed Fitting CP6300-21Duct Kit CP6078-107

AVAILABLE OPTIONSThermo SensorRH = CP6282-2 / LH = CP6282-3


CP6078 & CP6077 6 Piston, Billet Radi-CAL™

TYPICAL APPLICATION◘ GT Cars Front & Rear.

FEATURES◘ CP6077 Small bore version. ◘ Radial mount, 210 x 42mm ctres.◘ Benefi ts from radical asymmetric design concept.◘ Superior dynamic performance◘ Ducted air cooling features, - reduces caliper temperatures.◘ Monobloc Alumin/alloy body.◘ Designed to operate on Carbon or Iron Discs.◘ Internally ported.◘ Titanium pistons.◘ Carbon duct fi tted.◘ Dry Bleeds fi tted.

PART NUMBERS- RH, CP6078-2S7MPD.- LH, CP6078-3S7MPD.- RH, CP6077-4S7MPD.- LH, CP6077-5S7MPD.


CP4240 CARBON PAD - Area = 78.12cm²- Depth = 53.0mm- Thickness = 25.0mm

152.0 (5.98”)

64

.00

151.9 (5.98”)

80

.6(3

.17

”)

CP3558D54 IRON PAD - Area = 80.17cm²- Depth = 54.0mm- Thickness = 25.0mm


Ø12.212.1

Ø22.0

11

4.0

DIS

CC

TO

CA

LIP

ER

MT

GF

AC

EL

63

.5T

OT

OP

OF

PA

DM

AT

’L

29

.65

Ø27.0 BORE (LEADING)

146.5 146.5

Ø31.8 BOREØ38.1 BORE(TRAILING)


R15

1.0

EFFECTIV

ERAD

IUS

R180.3PATHWAY RADIUS

THERMO SENSOR(PT100 TYPE) OPTIONCP6282-2 (RH)CP6282-3 (LH)

M10x1.0

HYDRAULIC

PORTS

3.8

C’B

OR

E13.9

FU

LL

TH

R’D

IF THE STANDARD INLET FITTINGIS NOT USED, ENSURE THEREPLACEMNT HAS AT LEAST12mm OF ENGAGEMENT IN THEPORT

210.0

42

.0

Ø20 MINSPOTFACE

TYPICAL MTGTIGHTENINGTORQUE FORGUIDANCEONLY: M12-65Nm& M10-54Nm

CP6200-21 DRY BREAK FITTING TIGHTENINGTORQUE 13Nm. APPLY LOCTITE 270 TO THREADUPON ASSEMBLY NOTE: DRY BREAK AND INLETADAPTOR SHOULD BE SWAPPED OVER IF THECALIPER IS TO BEUSED IN A TRAILINGPOSITION

89.0 MAX

43.0 MAX 127.5 MAX

R1

97

.0M

AX

R1

26

.5M

IN

R1

22

.0M

IN

R11

4.0

MIN

52.75 MAX

R5

R5

20°

R50

RADIAL PROFILE(SCALED FOR AØ355.00 DISC)

DISC & WHEEL CL

WHEN RUNNING CP3558 IRON PAD THEPAD SUPPORTS MUST BE FITTED SOTHAT THE LETTERS ‘I’ ON THE PADSUPPORTS FACE EACH OTHER AS SHOWN.WHEN RUNNING CP4240 CARBON PAD THEPAD SUPPORTS MUST BE FITTED SO THATTHE LETTERS ‘C’ ON THE PADSUPPORTS FACE EACH OTHER AS SHOWN.

148.00 MAX 150.00 MAX

26.99 (1.063")LEADING BORE

31.75 (1.25")BORE 38.10 (1.50")

TRAILING BORE

63.5

'PL'

DIM

EN

SIO

N125.5

0'U

' DIM

EN

SIO

N

162.00EFFECTIVE RADIUS

30.1

2

29.00 MAX59.00 MAX

88.50 MAX102.00 MAX

29.00 MAX59.50 MAX

88.50 MAX98.30 MAX

212.0

0M

AX

206

.50

MA

X

180

.00

MA

X

138.0

0M

IN

131

.50

MIN

58.50 MIN58.50 MIN

42.0

0±0.0

5O

FFSET

DIM

'N'C

'

22.00

R DISC191.38PATHWAY

4.1

0

40.0

0

RADIAL PROFILETO SUIT Ø378 DISC

M10 x 1.00 THREADINLET PORT

FITTING SUPPLIED

17NM (12.5LB)TIGHTENING TORQUEBLEED SCREW MAX

PAD RETAINER BOLT MAXTORQUE 14.9NM (11.9LB)

MOUNTING HOLE CENTRES210.00

12.20 ±0.05MTG HOLE

±0.05

22.00MTG C/BORE


http://www.apracing.com/drawings/cp5095-1.pdf

jbennett

Note


12

+44 (0)24 7663 9595

12



CP6160 & CP6161 6 Piston, Billet Radi-CAL™

TECHNICAL SPECIFICATIONPiston Sizes (mm)

CP6160 Ø27.0mm Ø31.8mm Ø38.1mm

CP6161 Ø26.0mmØ27.0mmØ31.8mm

Piston AreaCP6160 50.1cm²CP6161 37.9cm²Disc Diameter Ø390.0mmDisc ThicknessIron 36.0mmCarbon 37.0mmWeight No Pads 2.5KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 210.0mmMtg offset 42.0mmMtg hole Ø 12.15mm‘PL’ Dimension 63.51mm

SPARE PARTSØ26.0 - Piston CP6057-104Ø27.0 - Piston CP6055-110Ø31.8 - Piston CP6055-111Ø38.1 - Piston CP6055-112Wear Plates. x 4 CP6060-107Beam W/Plate CP6066-104Pad Supports CP6078-105Seal Repair Kit CP4518-CEJ


Dry-Bleed Fitting CP6300-21Duct Kit CP6160-104

AVAILABLE OPTIONS

Thermo SensorRH=CP6282-2LH=CP6282-3

TYPICAL APPLICATION◘ All GT / Endurance Classes.

FEATURES◘ Radial mount, 210 x 42mm ctrs.◘ CP6161 Small bore version.◘ Benefi ts from radical asymmetric design concept. ◘ Superior dynamic performance.◘ Ducted air cooling features, - reduces caliper temperatures.◘ Monobloc Alumin alloy body.◘ Designed to operate on Carbon or Iron Discs.◘ Internally ported.◘ Titanium pistons.◘ Carbon duct fi tted.◘ Dry Bleeds fi tted.

PART NUMBERS- RH, CP6160-2S7MPD.- LH, CP6160-3S7MPD.- RH, CP6161-2S7MPD.- LH, CP6161-3S7MPD.


CP4970 CARBON PAD - Area = 83.0cm²- Depth = 53.0mm- Thickness = 30.0mm


162.9 (6.41”)

80

.6(3

.17

”)

Disc Ø R1 R2 R3 R4 R5 R6390 217.4 200.7 196.8 192.7 175.5 141380 212.4 195.7 191.8 187.7 170.5 136.3

R7 R8 R9 R10 R11 EFF RAD390 139.1 131.5 144.5 190.3 214.7 168.4380 135 126.5 139.5 185.3 209.7 163.4


CP6083 6 Piston, Billet Radi-CAL™

Swing Bridge, Quick Pad Release.TECHNICAL SPECIFICATION


Piston Area 50.1cm²Disc Diameter 390.0mmDisc Thickness 36.0mmWeight No Pads 2.42KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 210.0mmMtg offset 42.0mmMtg hole Ø 12.15mm‘PL’ Dimension 63.5mm

SPARE PARTSØ27.0 - Piston CP6083-108Ø31.8 - Piston CP6083-107Ø38.1 - Piston CP6083-106Wear Plates. x 4 CP5856-120Beam W/Plate CP6066-104Pad Supports CP6165-109Seal Repair Kit CP4518-CEJ


Dry-Bleed Fitting CP6300-21Quick Release Stud kit CP6083-6

Quick Release Pad Retainer kit CP6083-7

AVAILABLE OPTIONSThermo SensorRH = CP6282-2 LH = CP6282-3

TYPICAL APPLICATION◘ All GT / Endurance Classes.

FEATURES◘ Radial mount, 210 x 42mm Ctrs.◘ Benefi ts from radical asymmetric design concept.◘ Superior dynamic performance.- Extra central bridge increases stiffness◘ Swing bridge, quick release pad retainer mechanism.◘ Monobloc Aluminium alloy body.◘ Designed to operate Ø390 x 36mm Iron Discs.◘ Designed to suit upto 32mm thick pad.◘ 100mm total stack thickness allowed.◘ Internally ported.◘ Domed Titanium pistons fi tted. - Stainless steel pistons option available.◘ Dry Bleeds fi tted.

PART NUMBERS- RH, CP6083-2S7M.- LH, CP6083-3S7M.


CP6210D54 IRON PAD - Area = 83.0cm²- Depth = 54.0mm- Standard Thickness = 30.0mm- Special Thickness = 32.0mm

162.9 (6.41”)

80.6

(3.1

7”)

NOTE:OPTIONAL DRY BREAK FITTING CP6300-21DRY BREAK TO BE USED IN CONJUNCTIONWITH FEMALE COUPLING.FOR FURTHER DRY BREAK INFORMATION &SPARES REFER TO CP6300-13CD INSTALLATIONDRAWING.APPLY LOCTITE 270 TO THREAD UPON ASSEMBLYTIGHTENING TORQUE 13Nm.

QUICK RELEASE PAD RETAINER MECHANISM.MAX TIGHTENING TORQUE 25Nm (18.5lbft)

BLEED SCREW MAXTIGHTENING TORQUE17Nm

SEE NOTE

CALIPER BODYTHERMO-SENSOR(PT100 TYPE)AVAILABLE-CP6282-2 (RH)CP6282-3 (LH)

TYPICAL MTG TIGHTENINGTORQUE FOR GUIDANCEONLY:M12 - 65Nm & M10 - 54Nm

150.50 144

42

10

Ø22

37.7

0

210

4°

4°218.6

0

127.5

0

64

98.10

142.8

0

57

195

75.70

178.4

5

7.50

16

8E

FF

EC

TIV

ER

AD

IUS

RADIAL PROFILESCALED FOR AØ390 DISC

R170.50

R25

Ø26.99(LEADING)

Ø31.75 BORE Ø38.10 BORE(TRAILING)

63.5

0‘P

L’D

IMN

12.2012.10Ø

0.8

5x45°

(BO

TH

EN

DS

)

131.5

0‘U

’DIM

NR197.50 PATHWAY

RADIUS

HYDRAULICINLET M10x1.0


98.30 MAX94.30 MAX (DUCTRETAINING SCREW)94.30 MAX (DUCT

RETAINING SCREW) 113.80 MAX54.35 MAX49.40 MAX

R50.5MAX

R8 M

IN

R9 M

IN

R10 M

AX

R1 M

AX

R11 M

AX

R2 M

AX

(D

UC

TR

ETA

ININ

G S

CR

EW

)

R3 M

AX

(D

UC

TR

ETA

ININ

G S

CR

EW

)

R4 M

AX

R5 M

IN

R6 M

IN

R7 M

IN

93.50 MAX

58.00 MAX 58.00 MAX

R4.50MAX


131.5

0‘U

’DIM

’N63.5

1‘P

L’D

IM’N

37.7

0

31.0

1

0.8

5x45°

MIN

Ø22.00

Ø12.2012.10

150.00 150.00

Ø38.10 BORE(TRAILING)Ø31.75 BORE

Ø27.00 BORE(LEADING)

Ø22.00

OPTIONAL CALIPER BODY THERMOSENSOR (Pt100 TYPE) AVAILABLECP6282-2 (RH) / CP6282-3 (LH)

R197.50 PATHWAY RADIUS

210.00

42.0

0

DRY BREAK FITTING TIGHTENINGTORQUE 13Nm. DRY BREAK TO BEUSED IN CONJUNCTION WITH CP6300-7BLEED SYSTEM FITTING. FOR FURTHERDRY BREAK INFORMATION & SPARESREFER TO CP6300-1CD INSTALLATIONDRAWING.NOTE: DRY BREAK AND INLET ADAPTORMUST BE SWAPPED OVER IF THECALIPER IS BEING USED IN A LEADINGPOSITION

WHEN RUNNING CP6210 IRON PADTHE PAD SUPPORTS MUST BE FITTEDSO THAT THE LETTERS ‘I’ ON THE PADSUPPORTS FACE EACH OTHER ASSHOWN. WHEN RUNNING CP4970CARBON PAD THE PAD SUPPORTSMUST BE FITTED SO THAT THELETTERS ‘C’ ON THE PAD SUPPORTSFACE EACH OTHER AS SHOWN.

Ø11.00 C/BORE3/8x24UNF

3.8

0 C

/BO

RE

13.9

0 R

EF

10.1

0F

ULL

TH

R’D

DETAIL SSCALE 2:1

HYDRAULICINLETM10x1.0

12.0

0 M

INE

NG

AG

EM

EN

T(I

NLE

TA

DA

PT

OR

)

TYPICAL MTG TIGHTENINGTORQUE FOR GUIDANCEONLY M12-65Nm & M10-54Nm




jbennett

Note


13

www.apracing.com

13



CP61696 Piston, Slimmed Radi-CAL™

TYPICAL APPLICATION◘ All GT / Endurance Sprint Classes.

NOTECP6169 has been designed for narrow carbon stack of 76mm

FEATURES◘ Radial mount, 210 x 42mm ctrs.◘ Benefi ts from radical asymmetric design concept. ◘ Superior dynamic performance.◘ Ducted air cooling features, - reduces caliper temperatures.◘ Monobloc Aluminium alloy body- Nickel plated surface fi nish.◘ Designed to operate on Ø378 x 32mm Carbon discs.◘ Designed to accept 22mm thick carbon pad.◘ Internally ported.◘ Domed Titanium pistons fi tted.◘ Dry Bleeds fi tted.

PART NUMBERS- RHT, CP6169-14S7M.- LHT, CP6169-15S7M.- RHL, CP6169-16S7M.- LHL, CP6169-17S7M.


PAD INFORMATION - PAD FAMILY = CP6169- Full Pad Area = 80.5cm²- Pad Depth = 53.0mm- Pad Thickness = 22.0mm


CP6269 6 Piston, Forged Radi-CAL™



Piston Area 60.75cm²Disc Diameter 390mmDisc Thickness 35.60mmWeight No Pads 3.3KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 210.0mmMtg offset 42.0mmMtg hole Ø 12.15mm‘PL’ Dimension 63.5mm

SPARE PARTSØ31.75 - Piston CP6268-104Ø34.0 - Piston CP6268-105Ø41.3 - Piston CP6268-106Seal Repair Kit CP8518-EFKPad Abutment PlatesLeading x 2 CP6269-102 Trailing x 2 CP6269-103Pad Supports CP6269-104M4 Pad Support Cap Heads x 8 CP3215-115

H Piece Pad Retainer Kit CP6268-20

Quick Release (Clip) Pad Retainer Kit.

CP6268-21


Bleed Screw CP3880-1

TYPICAL APPLICATION◘ GT3

FEATURES◘ Radial mount, 210 x 42mm ctrs.◘ Benefi ts from radical asymmetric design concept.◘ Superior dynamic performance.◘ Ducted air cooling features, - reduces caliper temperatures.◘ Forged monobloc Aluminium alloy body. - Anodised surface fi nish.◘ Designed to operate on Iron discs 390mm x 36mm.◘ 95.6mm total stack thickness allowed - 35.6mm disc & 2 x 30mm pads.◘ Internally ported.◘ Stainless Steel pistons fi tted.◘ Dry Bleeds available as an option.

PART NUMBERS- RHT, CP6269-2S7L.- LHT, CP6269-3S7L.- RHL, CP6269-4S7L.- LHL, CP6269-5S7L.




Piston Area 50.1cm²Disc Diameter 378.0mmDisc Thickness 32.0mmWeight No Pads 1.95KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 210.0mmMtg offset 42.0mmMtg hole Ø 12.15mm‘PL’ Dimension 63.5mm

SPARE PARTSØ27.0 - Piston CP6169-108Ø31.8 - Piston CP4969-139Ø38.1 - Piston CP6169-106Wear Plates. x 4 CP6169-113Seal Repair Kit CP4518-CEJ


Dry-Bleed Fitting CP6300-21Carbon Cooling Duct

CP6169-110 or -111

Upper Mtg Bush x 2 CP6720-162

AVAILABLE OPTIONSThermo Sensor- PT100 Type CP6282-6- PT1000 Type CP6282-7LDVT Assy Complete. CP4969-54

LDVT Rod & YokeAssy Spares. CP4969-55

163 NOM.

42

210 CTRS

R134.5

R163.5

EFFEC

TIV

ER

AD

IUS

93

R170.5

R1

70

.2

R25

65

R12

R170 2

12

R1041

SECTION J-J

30

37.7

J

J

KK

5°

30°

DISC WIDTH

NOMINAL RADIALPROFILE ON AØ378.0 DISC

Ø12.212.1

Ø10.210.15

Ø21

SECTION K-K

14

12 MIN

ENGAGEMENT

3.8 COUNTERBORE

CALIPER BODY THERMO-SENSORAVAILABLE - CP6282-6 (PT100 TYPE)CP6282-7 (PT1000 TYPE)RETAINING SCREW CP3555-188 (M4 X 6)

NOTE THAT THE INLETPORT IS C/BORED USEA LONG INLET ADAPTORSUCH AS CP6160-107(M10X1.0, 14 LONG TO-3AQ) TO ENSURESUFFICIENT THREADENGAGEMENT

A DRY-BREAK CONNECTOR IS FITTED AS STANDARD.TIGHTENING TORQUE - VALVE INTO BODY - 13Nm /CAP ONTO VALVE - 4NmAPPLY SMALL AMOUNT OF LOCTITE 270 TO THREADOF VALVE UPON ASSEMBLY ONTO BODYMATING PART - CP6300-32 FITTING (BLEED SYSTEM)

1.5

0°

99

15

9.8

8

29

R48 56.60

56

.62

R28

4.40°

151165.50

15

42

210

28

58

12

2.5

0R

31

20°

31

.40

26°

168 (

EF

FE

CT

IVE

RA

DIU

S)



63.5

0‘P

L’D

IMN

12.2012.10

Ø

0.8

5x45°

MIN

131.5

0‘U

’DIM

N

LEADING BORE(1.250")Ø31.75

(1.339")Ø34.00

TRAILING BORE(1.625")Ø41.28

Ø22

TYPICAL MTG TIGHTENINGTORQUE FOR GUIDANCEONLY: M12 - 65Nm & M10 - 54Nm


BLEEDSCREWMAXTIGHTENINGTORQUE -17Nm

M6x1.0 PAD RETAINER BOLTSLUBRICATE WITH COPPER GREASE& TIGHTEN TO 10Nm


162.9 (6.41”)

80.6

(3.1

7”)




jbennett

Note


14

+44 (0)24 7663 9595

14


IRON DISC INSTALLATION DRAWING



SPARE PARTSØ28.6 - Piston CP6070-110Ø36.0 - Piston CP6070-111Seal Repair Kit CP4518-DHWear Plates. x 4 CP6470-106Beam Wear Plate x 1 CP6470-105

Bleed Screw kit CP3880-1

AVAILABLE OPTIONSThermo Sensor RH=CP6282-2

LH=CP6282-3Dry-Bleed Fittings See Page 91

CP64704 Piston, Billet Radi-CAL™ Rear

TYPICAL APPLICATION◘ Rear for All GT / Endurance Classes.

FEATURES◘ Radial mount, 180 x 42mm Ctrs.◘ Benefi ts from radical asymmetric design concept.◘ Superior dynamic performance.◘ Suits Ø355 x 32mm Iron disc or Ø355 x 35mm Carbon disc.◘ Monobloc Aluminium alloy body.◘ Ducted air cooling, - reduced caliper temperatures. ◘ Titanium pistons.◘ Internally ported.◘ Optional Dry-Bleed fi ttings & body Thermo-Sensor. ◘ Ceramic piston insulation caps available.

PART NUMBERS◘ To suit Iron Disc- RH, CP6470-2S7MP.- LH, CP6470-3S7MP.◘ To suit Carbon Disc- RH, CP6470-12S7MP.- LH, CP6470-13S7MP.


CP6070 CARBON PAD - Area = 61.6cm²- Depth = 53mm- Thickness = 25.0mm


125.00

90.00

82.5086.00

90.0050.00

Ø28.58 (1.125”)LEADING BORE

Ø36.00 (1.417”)TRAILING BORE

R2

02

.00

R1

78

.50

R1

50

.00

R1

33

.50

R1

24

.50

RADIAL PROFILE(SCALED FOR AØ355.00 DISC)

THERMO-SENSOR(Pt100 TYPE)OPTIONCP6282-2 (RH)CP6282-3 (LH)

125.00

Ø22.00

Ø28.5MAX TOCLEARBOLT


Ø12.2012.10

0.8

5x4

5°

MIN

R180.00

PATHWAY RADIUS

34

.20

39

.20

63

.50

(PL

DIM

N)

11

4.0

0(U

’DIM

N)

Ø355.0 DISC & WHEEL CL

180.00

130.00

HYDRAULIC INLETM10x1.0x10 FULL THD

42

.00

62

.00

BLEED SCREW MAXTIGHTENING TORQUE17Nm

TYPICAL MTG TIGHTENINGTORQUE FOR GUIDANCEONLY;M12 - 65Nm &M10 - 54Nm


CP64804 Piston, Forged Radi-CAL™ Rear



SPARE PARTSØ28.6 - Piston CP6480-104Ø36.0 - Piston CP6286-134Seal Repair Kit CP4518-DHPad Retainer H PieceRetainer Part No.Right Hand CP6480-106Left Hand CP6480-107Wear Plates. x 4 CP6470-106Pad Supports x 4 CP6270-101


Bleed Screw kit CP3880-1

AVAILABLE OPTIONSDry-Bleed Fittings See Page 91

TYPICAL APPLICATION◘ Rear for All GT / Endurance Classes.

NOTECP6480 has been designed to compliment, 6 Piston front caliper CP5095 family.

FEATURES◘ Radial mount, 180 x 42mm ctrs.◘ Benefi ts from radical asymmetric design concept. ◘ Superior dynamic performance.◘ Suits Ø355 x 32mm Iron discs.◘ Forged monobloc Aluminium alloy body. ◘ Stainless steel pistons◘ Internally ported.◘ Optional Dry-Bleed fi ttings & body Thermo-Sensor. ◘ 7Ib Anti-Knockback springs fi tted.



PAD INFORMATION - PAD FAMILY = CP6070D49- Pad Area = 61.6cm²- Pad Depth = 49.0mm- Pad Thickness = 25.0mm

(1.125) Ø28.58 BORE(LEADING)

127.45 129.50

Ø22.0

(1.417) Ø36.00 BORE(TRAILING)

Ø28.5MAX TOCLEAR BOLT DIRECTION OF

DISC ROTATION

Ø12.2012.10

0.8

5x4

5°

MIN

34

.20

39

.20

63

.5(P

LD

IM’N

)

R180 (PATHWAY RADIUS)

Ø355 DISC & WHEEL CL

99.5080.0

57.5

R2

00

.0

R1

71

.0

R1

34

.0

R1

23

.80

95.0

52.50


R151.90 (EFFECTIVE RADIUS)


180.0

HYDRAULIC THREAD M10x1.0

10

42

.0

TYPICAL MTG TIGHTENINGTORQUE FOR GUIDANCEONLY: M12 - 65Nm &M10 - 54Nm

DRY BREAK FITTING OPTION

DRY BREAK TO BE USED IN CONJUNCTIONWITH CP6300-7 BLEED SYSTEM FITTING.FOR FURTHER DRY BREAK INFORMATION& SPARES REFER TO CP6300-13CDINSTALLATION DRAWING.

APPLY LOCTITE 270 TO THREAD UPON ASSEMBLYTIGHTENING TORQUE 13Nm. CAP TIGHTENINGTORQUE IS 4Nm


jbennett

Note


http://www.apracing.com/drawings/cp6480-1cd-iss1.pdf


15

www.apracing.com

15

BRAKE CALIPERS - Rally

CP6720 & CP6730 4 Piston, Front or Rear


CP6720 Ø34.9mmØ41.3mm

CP6730 Ø31.8mm x 4Piston AreaCP6720 45.93cm²CP6730 31.66cm²Disc DiameterMax Ø355.0mmMin Ø285.0mmDisc Thickness 28.0mmWeight No PadsCP6720 2.5KgCP6730 2.6KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 180.0mmMtg offset 35.0mmMtg hole Ø 12.15mm‘PL’ Dimension 57.8mm

SPARE PARTSPistonsØ34.9mm CP3567-108Ø41.3mm CP3344-109Ø31.8mm CP3349-103Seal Repair KitCP6720 CP4518-GKCP6730 CP4518-EEPad Retainer H/PieceRetainer P/No. CP6720-101Ret / Bolt P/No. CP3345-118Wear Plates CP5200-306AKB Spring Kits

CP6720 CP6518-4LBLL

CP6730 CP6518-4LBSS

Bleed Screw Kit CP3880-1

For RadialProfi le information.Please contact AP Racing TechnicalSection.

INSTALLATION DRAWING273.00

136.50


33.3

0

RAD‘N

’ DISC PATHW

AY

DISC & WHEEL CL

DIM

N‘U

’

57.8

0(’

PL’

DIM

N)

INLETPORTM10x1.0THREAD

DISC CL

DISC CL

MAX TIGHTENINGTORQUE FORM6 PAD RETAINERSCREWS = 10NmCOPPER SLIP ONBOLTS RECOMMENDED

35.0

0O

FFSET

12.2012.10MTG HOLES

Ø

Ø22.00C/BORE

180.00±0.05 MOUNTING HOLE CENTRES

TYPICAL APPLICATIONS◘ Super 1600.◘ S2000 Rally. ◘ Rally Raid.

FEATURES◘ Radial mount, 180 x 35mm ctrs.◘ Suits Ø355 / 285mm x 28mm disc.◘ Aluminium alloy body.◘ Internally ported. - No external bridge pipes.◘ Protected bleed screws.◘ Aluminium pistons standard, - Stainless Steel optional.

PART NUMBERS◘ CP6720 Type.- RHT, CP6720-6S4. - LHT, CP6720-7S4 .- RHL, CP6720-8S4.- LHL, CP6720-9S4.

◘ CP6730 Type.- RH, CP6730-2S4.- LH, CP6730-3S4.


CP3215D46 PAD- Pad Area = 54.6cm²- Pad Depth = 45.6mm- Pad Thickness = 16.8mm

CP3215D50 PAD- Pad Area = 57.4cm²- Pad Depth = 50.3mm- Pad Thickness = 16.8mm



Piston Area 50.1cm²Disc Diameter Ø320.0mmDisc ThicknessCP6750-2/3/4/5 28.0mmCP6750-6/7/8/9 32.0mmWeight No Pads 3.0KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 180.0mmMtg offsetCP6750-2/3/4/5 35.0mmCP6750-6/7/8/9 37.0mmMtg hole Ø 12.15mm‘PL’ Dimension 62.5mm

SPARE PARTSØ27.0 - Piston CP6750-106Ø31.8 - Piston CP6750-107Ø38.1 - Piston CP6750-108

Seal Repair Kit CP4518-CEJ:RALLY

Pad Retainer H/PieceRet / Part No.CP6750-2/3/4/5 CP6750-109CP6750-6/7/8/9 CP6750-113Ret / Bolt P/No. CP3445-123Wear PlatesCP6750-110 x 1 / CP6750-111 x 1 & CP6750-112 x 2Bleed Screw Kit CP3880-1


Disc Width W1 W2 W3 W4 W5 W6 W728.0 47.8 66.5 47.1 70.0 79.6 72.5 44.832.0 49.8 68.5 49.1 72.0 81.6 74.5 46.8


CP6750 - 6 Piston, FrontTYPICAL APPLICATIONS◘ Rally Raid.◘ Tarmac Rally.

FEATURES◘ Radial mount, 180 x 35mm ctrs.◘ Suits Ø320mm x 32 / 28mm disc.◘ Aluminium alloy body.◘ Internally ported. - no external bridge pipes.◘ Stainless Steel pistons. - Dirt Seals fi tted.◘ Protected bleedscrews.◘ H/Piece pad retainer.◘ Superceded by CP6766.◘ Version to suit Ø355 x 32mm available. Refer CP6750-10cdCustomer Drawing for details on www.apracing.com

PART NUMBERS◘ To suit a disc Ø320x28mm- RHT, CP6750-2S4L.- LHT, CP6750-3S4L.- RHL, CP6750-4S4L.- LHL, CP6750-5S4L.

◘ To suit a disc Ø320x32mm- CP6750-6S4L RHT.- CP6750-7S4L LHT.- CP6750-8S4L RHL. - CP6750-9S4L LHL.


Note: Drawing for guidance only. Download latest issue installation drawing from www.apracing.comNote: Drawing for guidance only. Download latest issue installation drawing from www.apracing.com

jbennett

Note


http://www.apracing.com/drawings/cp6750_1cd.pdf


16

+44 (0)24 7663 9595

16




SPARE PARTSPistonsØ27.0mm CP4907-106Ø34.0mm CP6760-118Seal Repair Kit CP4518-CFPad Retainer H/PieceRetainer P/No. CP4144-101Ret / Bolt P/No. CP3344-165Wear Plates CP6561-106Bleed Screw Kit CP3880-1



70.50 MAX

79.50 MAX

70.50 MAX

37.2 MAX37.2 MAX

45.25 MAX 45.25 MAX

R1

50

.20

MA

X

R1

68

.60

MA

X

R1

04

.25

MIN

R1

02

.25

MIN

R1

15

.80

MIN

R1

17

.40

MIN

12

7.9

0 E

FFEC

TIV

E R

AD

IUS

R1

40

.00

MA

X

R1

41

.60

MA

X

RADIAL PROFILE(SCALED FOR AØ300 DISC)

BLEED SCREWTIGHTENINGTORQUE17Nm

57

.80

‘PL’

DIM

’N

33

.15

24

.65

Ø12.2012.10

Ø16.0515.95

R0.50MAX

0.2

5x4

5°

MIN

4.9

0 M

IN


230.00

230.00

Ø22.00

27.0 (1.063”)LEADING BORE

34.0 (1.339”)TRAILING BORE

R152.40 D

ISC P

ATHW

AY

‘U’

DIM

’N

180.00 MTG HOLE CTRS

HYDRAULIC INLETM10x1.01

0.0

0M

AX

FU

LLTH

DTYPICAL MTG TIGHTENINGTORQUE FOR GUIDANCE ONLY:M12 - 65NmM10 - 54Nm

35

.00

OFFSET

MAX TIGHTENINGTORQUE FOR M6PAD RETAINER SCREWS = 10NmCOPPER SLIP ON BOLTSRECOMMENDED

CP6760 - 4 Piston

TYPICAL APPLICATIONS◘ S2000 Rear.◘ Grp ‘N’ Rear.

FEATURES◘ Radial mount, 180 x 35mm ctrs.◘ Suits Ø300mm x 28mm disc.◘ Aluminium alloy body.◘ Internally ported.- No external bridge pipes.◘ Single protected bleedscrew.◘ Stainless Steel pistons.◘ H/Piece pad retainer.

PART NUMBERS- RHT, CP6760-2S4L.- LHT, CP6760-3S4L.- RHL, CP6760-4S4L.- LHL, CP6760-5S4L.


113.47 (4.47”)

52.1

0 (

2.0

5”)



TYPICAL APPLICATION◘ Rally Raid.

FEATURES◘ Radial mount, 200 x 43mm ctrs.◘ Re-circulating Liquid Cooling System. - Controls caliper temperatures.◘ Monobloc Aluminium alloy body.◘ Benefi ts from radical asymmetric design concept.◘ Superior dynamic performance.◘ Ducted air cooling features. ◘ Designed to operate on Ø320 x 32mm Iron discs.◘ Internally ported.◘ Temperature Sensor Port.◘ Stainless Steel pistons.◘ Dirt (wiper) seals fi tted.◘ Non Liquid-Cooled option also available - CP6766 Family.

PART NUMBERS- RHT, CP6768-2S7L.- LHT, CP6768-3S7L.


CP6768 6 Piston, Liquid Cooled Radi-CAL™



Piston Area 50.1cm²Disc Diameter Ø320.0mmDisc Thickness 32.0mmWeight No Pads 2.9KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 200.0mmMtg offset 43.0mmMtg hole Ø 12.15mm‘PL’ Dimension 74.43mmCoolant ConnectionsInlet & Outlet 9/16” x18 JIC

SPARE PARTSPistonsØ27.0mm CP6560-126Ø31.8mm CP6560-127Ø38.1mm CP6560-128Wear Plates. x 4 CP6766-108Beam W/Plate CP6766-107Pad Supports CP6078-105

Seal Repair Kit CP4518-CEJ:RAID


Bleed Screw Kit CP3880-1JIC Adaptor CP6768-107

64

.00

163.85

50

.50

SW

/D

EP

TH

74.15 MAX

47.60 MAXR32.50

R11.50

15

8.8

2M

AX

11

3.5

0M

IN

83

.50

MIN

10.0

0°

R27.50

4.0

0°

MIN

RADIAL PROFILESCALED FOR AØ319.75 DISC 8

5.5

8‘U

’D

IM’N

74

.43

‘PL’

DIM

’N4

7.0

0

5.0

0 Ø15.90 / 15.80

Ø12.20 / 12.10

23.50

153.00 149.40

1.0

0x4

5°

Ø27.00LEADING BORE

Ø31.75MIDDLE BORE

Ø38.1TRAILING BORE


R162.38

PATHWAY RADIUS

12

7.3

34

3.0

0

200.00

BLEED SCREWMAXTIGHTENINGTORQUE = 17Nm

Ø23.00

TYPICAL MTG TIGHTENINGTORQUES FOR GUIDANCEONLY: M12 - 65Nm

TEMPERATURE SENSORPORT M8x1.0

Ø18.00 HYDRAULIC INLETM10x1.0 1

7.5

0

6.3

01

0.0

0

7.00




jbennett

Note


17

www.apracing.com

17


INSTALLATION DRAWING FOR CP6830-4/5S4LP

CP6830 & CP6831 / Internally Ported, 4 Piston, Billet Radi-CAL™


CP6830 - Front Ø34.9mm x 2Ø41.3mm x 2

Piston Area 45.9cm²

CP6831 - Rear Ø27.0mm x 2Ø31.8mm x 2

Piston Area 27.3cm²Disc Ø - CP6830 Ø355.0mmDisc Ø - CP6831 Ø300.0mmDisc Thickness 32.0mm

Weight - CP6830 2.11KgWeight - CP6831 1.68KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 180.0mmMtg offset 42.0mmMtg hole Ø 10.175mm‘PL’ Dimension 57.5mm

SPARE PARTSØ27.0mm Piston CP6821-105Ø31.8mm Piston CP6821-104Ø34.9mm Piston CP6820-106Ø41.3mm Piston CP6820-107Seal Repair KitCP6830 CP4518-GKCP6831 CP4518-CEWear Plates. x 4CP6830 CP6830-102CP6831 CP6820-113Beam W/Plate CP6820-109Bleed Screw Kit CP3880-1AKB Spring KitCP6830 - CP6518-4LBLLCP6831 - CP6518-4LBSSMounting BossUpper CP6720-162Lower CP6820-103

TYPICAL APPLICATIONS◘ WRC Turbo. ◘ S2000Tarmac/Gravel Specifi cations

FEATURES◘ Radial mount, 180 x 42mm ctrs.◘ CP6831 Small bore Version for rear applications.◘ Designed to operate on Ø355 or Ø300mm x 32mm Iron disc.◘ Benefi ts from radical asymmetric design concept for Superior dynamic performance.◘ Ducted air cooling features, signifi cantly reduces caliper temperatures.◘ Monobloc Aluminium/alloy body.◘ Internally ported.◘ Stainless Steel pistons.

FRONT PART NUMBERS- RHL, CP6830-4S4LP.- LHL, CP6830-5S4LP.

REAR PART NUMBERS- RHL, CP6831-4S4LP.- LHL, CP6831-5S4LP.


GRAVEL PAD- Pad Family = CP6820D46- Pad Area = 61.7cm³- Pad Depth = 46.0mm- Pad Thickness = 16.0mm

TARMAC PAD- Pad Family = CP6820D48- Pad Area = 63.2cm³- Pad Depth = 48.0mm- Pad Thickness = 16.0mm

139.3 (5.48”)

61.4

(2.4

1”)

139.3 (5.48”)

61.4

(2.4

1”)

CP6830

2.35°

64.25

53.90R17.25

R37.40 R22.60

R57.40 10.50

62.75

66.90

R75.75R9

7.3

0R

12

3.7

0R

10

4.7

0R

12

9.6

0R

11

8.4

0R

17

0.0

0R

14

4.7

5R

18

8.0

0

R1

60

.45

R2

00

.90

RADIAL PROFILESCALED FOR AØ300 DISC.NOTE: RADIALPROFILE INCLUDESDUCT

RADIAL PROFILESCALED FOR AØ355 DISC.NOTE: RADIALPROFILE INCLUDESDUCT

Ø34.93LEADING BORE

12

6.5

0EFFEC

TIV

ER

AD

IUS

15

3.1

5EFFEC

TIV

ER

AD

IUS

0.7

5°

0.7

5°

14

8.4

7

R179.88

DISC PATHWAY RADIUS


Ø22.00

Ø22.00

Ø10.2010.15

Ø10.2010.15

36

.50

57

.50

‘PL’

DIM

’N

0.5

0x4

5°

42

.00

12

.00

180.00

HYDRAULIC INLETM10x1.0-6H

64.10

53.9026.80

10.60R57.40

R17.25

67.00

62.802.35°

R75.75


CP6840 Internally Ported, 4 Piston, Forged Radi-CAL™


Ø41.3mm x 2Piston Area 45.9cm²Disc DiameterMax Ø355.0mmMin Ø300.0mmDisc Thickness 32.0mmWeight No Pads 2.16KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 180.0mmMtg offset 42.0mmMtg hole Ø 10.175mm‘PL’ Dimension 57.5mm

SPARE PARTSØ34.9mm Piston CP6820-106Ø41.3mm Piston CP6820-107Seal Repair Kit CP8518-GKWear Plates. x 4 CP6820-113Beam W/Plate CP6820-109Bleed Screw Kit CP3880-1


Carbon Duct Kit CP6820-110

TYPICAL APPLICATIONS◘ WRC Turbo. ◘ S2000 Tarmac/Gravel specifi cations.◘ To meet FIA R4T & R5 cost cap.

FEATURES◘ Radial mount, 180 x 42mm ctrs.◘ Forged monobloc Aluminium alloy body.◘ Designed to operate on Ø355 or Ø300mm x 32mm Iron disc.◘ Benefi ts from radical asymmetric design concept.◘ Superior dynamic performance.◘ Ducted air cooling features, signifi cantly reduces caliper temperatures.◘ Internally ported.◘ Stainless Steel pistons.

PART NUMBERS- RH, CP6840-4S4L- LH, CP6840-5S4L




139.3 (5.48”)

61.4

(2.4

1”)

139.3 (5.48”)

61.4

(2.4

1”)

OPTIONAL DRY BREAK FITTINGTIGHTENING TORQUE 13NmDRY BREAK TO BE USED INCONJUNCTION WITH CP6300-7BLEED SYSTEM FOR FURTHER INFORMATION & SPARES REFERTO CP6300-13CD DRAWING

36

.50

29

.75

42

.00

A

180.00

1.2

0

9.2

5

12.34

97.0

0

0.7

5°

14

4.5

9

15

7.6

7

53.0050.00

13

5.4

5

104.7

0

62.56

R18.74

R39.32

201.0

5

197.5

1

4.900.90

110.3

7

124.5

017

2.1

9

183.8

9

65.00

49.9531.00

51.25

132.2

0

9.31

66.66

0.7

5°

R89.80

R18.01

2.34°

63.90

28.78°

28.28°

22.0

0°

29.21°

NOMINAL RADIAL PROFILESCALED FOR A Ø300 DISC

NOMINAL RADIAL PROFILESCALED FOR A Ø355 DISC

126.5

0 E

FF

EC

TIV

E R

AD

IUS

153.1

5 E

FF

EC

TIV

E R

AD

IUS

OPTIONAL KEEPERPLATE (CP4848-109

2 x M5x12 CAP HEADSCREW (CP4612-109

VIEW A

22.0

0°

(1.375)Ø34.93

(LEADING BORE)

(1.624)Ø41.25

TRAILING BORE

Ø22.00 10.2010.15

12.1512.05

Ø

Ø

57.5

0‘P

LD

IMN

’

148.3

5Ø

355 D

ISC

R179.88DISC PATHWAY RADIUS

2.34°

3.02°

28.5

0°

‘PUSH-IN’ TYPE8.8328.800

INLET Ø




jbennett

Note


18

+44 (0)24 7663 9595

18



Ø41.3mm x 2Piston Area 45.56cm²Disc DiameterMax Ø310.0mmMin Ø285.0mmDisc Thickness 26.0mmWeight No Pads 2.08KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 152.0mmMtg offset 39.8mmMtg hole Ø 10.2mm‘PL’ Dimension 51.0mm

SPARE PARTSPistonsØ38.1mm CP3215-113Ø41.3mm CP4270-3Seal Repair Kit CP4518-JKPad Retainer BoltRetainer Part No. CP8350-108Ret / Bolt P/No. CP3439-111Wear PlatesRight Hand x 2 CP8250-108 Left Hand x 2 CP8250-109Bleed Screw Kit CP3880-1Fluid Pipe CP8350-6




CP83504 Piston, Two Piece Forged Body

TYPICAL APPLICATIONS◘ R2 or Similar Series.

FEATURES◘ Small bore version of CP8351 & CP8352◘ Radial mount, 152 x 39.8mm ctrs.◘ Suits Ø285 or Ø310mm x 26mm thick disc.◘ Aluminium alloy body.◘ Lightweight forged Aluminium alloy construction.◘ High temperature, low drag seals fi tted as standard.◘ Aluminium alloy pistons.◘ Manufactured with bleedscrew and pipe protection.◘ Stainless Steel pad abutmentsand wear plates fi tted.




70.70 MAX

Ø1.50”)LEADING BORE

Ø1.625”)TRAILING BORE

PAD RETAINING BOLT MAX TIGHTENINGTORQUE 11Nm (8.5lb/ft)

121.0 MIN TO REMOVE PADSBLEED SCREWTIGHTENINGTORQUE12.5lB/FT

113.00 MAX 113.00 MAX

51.0

0‘P

L’D

IM’N

R136.17EFFECTIVE RADIUS

R158.00PATHWAYRADUIS ‘N’

104.

0‘U

’DIM

ENSI

ON

DISC WIDTH26.00 MAX

68.70 MAX69.20 MAX 51.50 MAX

40.60MAX

60.00 MAX

69.64 MAX48.50 MAX

R6.00

RADIAL PROFILETO SUIT Ø310 DISCDISC & WHEEL CL

R103

.70

MIN

R103

.70

MIN

R108

.50

MIN

R118

.70

MIN

R138

.20

MA

XR1

63.5

0 M

AX

R107

.70

MIN

R161

.50

MA

XR1

75.0

0 M

AX

Ø10.20MTG HOLE M6 KAYLOCK NUT

152.00 MOUNTING CENTRES

R10.00

39.8

0O

FFSE

T


CP8351 Ø44.5mm x 2Ø47.6mm x 2

CP8352 Ø41.3mm x 2Ø44.5mm x 2

Piston AreaCP8351 66.67cm²CP8352 49.56cm²Disc DiameterMax Ø310.0mmMin Ø285.0mmDisc Thickness 26.0mmWeight No Pads 2.08KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 152.0mmMtg offset 40.8mmMtg hole Ø 10.2mm‘PL’ Dimension 51.0mm

SPARE PARTSCP8351 PistonsØ44.5mm CP5751-148Ø47.6mm CP5751-149CP8352 PistonsØ41.3mm CP8350-119Ø44.5mm CP8352-106Seal Repair KitCP8351 CP4518-LMCP8352 CP4518-KLPad Retainer BoltRetainer Part No. CP8350-108Ret / Bolt P/No. CP3439-111Wear PlatesRight Hand x 2 CP8250-108 Left Hand x 2 CP8250-109Bleed Screw Kit CP3880-1Fluid Pipe CP8350-6Stainless Steel Mtg Boss x 2 CP8350-116

CP8351 - INSTALLATION DRAWING


CP8351 & CP83524 Piston, Two Piece Forged Body

TYPICAL APPLICATIONS◘ R2 or Similar Series.

FEATURES◘ CP8352 designed with alternative bore positions.◘ Radial mount, 152 x 40.8mm ctrs.◘ Suits Ø285 or Ø310mm x 26mm thick disc.◘ Lightweight forged Aluminium alloy body construction.◘ High temperature, low drag seals fi tted as standard.◘ Stainless Steel pistons.◘ Manufactured with bleedscrew and pipe protection.◘ Stainless Steel pad abutments and wear plates fi tted.

PART NUMBERS◘ With Ø44.5 / 47.6mm Bores.- RHL, CP8351-4S0L.- LHL, CP8351-5S0L.◘ With Ø41.3/44.5mm Bores.- RHL, CP8352-4S0L.- LHL, CP8352-5S0L.



121.00 MIN TO REMOVE PADS

BLEED SCREWTIGHTENINGTORQUE 17Nm(12.5lb/ft)DISC WIDTH

26.00 MAX

70.70 MAX 68.70 MAX69.20 MAX 51.50 MAX

40.60MAX

60.00 MAX69.84 MAX 48.50 MAX

RADIAL PROFILETO SUIT Ø280 DISCDISC & WHEEL CL

R152

.00

MA

XR1

27.7

0 M

AX

R107

.20

MA

XR9

9.00

MIN

R92.

20 M

IN

R92.

20 M

INR9

6.60

MIN

R150

.00

MA

XR1

66.0

0 M

AX

R136

.7 EF

FECTIV

E RADIUS

R158.00 PATHWAY RADIUS ‘N’

104.

0‘U

’DIM

ENSI

ON

51.0

0‘P

L’D

IM’N

Ø1.875”TRAILING BORE

113.00 MAX113.00 MAXØ1.75”LEADING BORE

Ø10.20MTG HOLE

152.00 MOUNTING CENTRES M6 KAYLOCKNUT

R10.00

40.8

0O

FFSE

T

PAD RETAINER BOLTSSHOULD BE TIGHTENEDTO A TORQUE OF11Nm (8.5lbs/ft)COPPER SLIP ON BOLTRECOMMENDED



http://www.apracing.com/drawings/CP8351-1CDf.pdf

jbennett

Note


19

www.apracing.com

19

BRAKE CALIPERS - Touring Car


Ø34.9mmPiston Area 31.9cm²Disc Diameter 355.0mmDisc Thickness 32.0mmWeight No Pads 2.4kgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 180.0mmMtg offset 35.0mmMtg hole Ø 12.15mm‘PL’ Dimension 55.0mm

SPARE PARTSS/Steel PistonsØ28.6mm CP6266-105Ø34.9mm CP6266-106Seal Repair Kit CP8518-DGWear Plates x 4 CP5760-105Pad Retainer Wear Plate CP6266-104

Pad Supports x 4 CP5870-108Bleed Screw Kit CP3880-1



CP62674 Piston, Forged Radi-CAL™ Rear


Ø44.45mmPiston Area 51.39cm²Disc Diameter 380.0mmDisc Thickness 34.0mmWeight No PadsS/Steel Pistons 2.13KgTitanium Pistons 1.98KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 180.0mmMtg offset 42.0mmMtg hole Ø 12.15mm‘PL’ Dimension 61.9mm

SPARE PARTSTitanium PistonsØ36.00mm CP5785-106Ø44.45mm CP5785-107Stainless Steel PistonsØ36.00mm CP5785-108Ø44.45mm CP5785-109Seal Repair Kit CP4528-HLWear Plates x 4 CP5785-113Pad Retainer Abutment Plates

RH CP5782-124/LH CP5785-125Dry Bleed Fitting CP6300-21Inlet Fitting CP5785-6Carbon Duct Kits

RH CP5785-104/LH CP5785-105


PAD INFORMATION - Pad Family = CP5788D54 (D48 available for lighter bake package)).- Pad Area = 77.3cm²- Pad Depth = 54.0mm- Pad Thickness = 20.0mm

TYPICAL APPLICATION◘ World Touring Car Front.

FEATURES◘ Radial mount, 180 x 42mm ctrs.◘ Benefi ts from a second genera-tion radical asymmetric design concept.◘ Superior dynamic performance.◘ Increased stiffness.◘ Reduced weight.◘ Monobloc Alum-alloy body.◘ Suits Ø380 x 34mm Iron disc.◘ Titanium pistons standard. - Stainless Steel option available.◘ Carbon duct fi tted.◘ Stainless Steel wear plates.◘ Dry Bleeds fi tted.◘ Supercedes CP5780 Caliper family.

PART NUMBERS◘ Underslung Mounted Caliper with Titanium Pistons.- RHT, CP5785-2S0MPD.- LHT, CP5785-3S0MPD.- RHL, CP5785-4S0MPD.- LHL, CP5785-5S0MPD.

Note: CP5785 also available in conventional mounting/handingleading and trailing confi guration. Please contact AP Racing technical section for more information.


CP57854 Piston, Billet Radi-CAL™

180.00

35.0

0

R204.0

0

54.00

R123.5

0

R7.00R5.00

153.3

0(E

FF

EC

TIV

E R

AD

IUS

)

Ø22.00

122.2

2

35.0

5

0.8

5x45°

MIN

134.63 134.4586.00

40.80

R1

77

.40

R1

31

.00 30.00°


24.0

0°

Ø34.93 (1.375)TRAILING BORE

Ø28.58 (1.25")LEADING BORE

55

.00

‘PL’D

IM’N

12

2.5

0‘U

’DIM

’N

Ø12.2012.05

R180.00PATHW

AYRADIUS

DISC & WHEEL CL

BLEEDSCREWMAX TIGHTENINGTORQUE17Nm

HYDRAULIC INLETM10X1.0X9 FULL THD

TYPICAL MTG TIGHTENINGTORQUE FOR GUIDANCEONLU: M12 - 65Nm & M10 - 54Nm

132.28 (5.20”)

46.6

1(1

.83”

)

TYPICAL APPLICATIONS◘ Touring Car.◘ GT.◘ Formula Competition Brake Kits.

FEATURES◘ Radial mount, 180 x 35mm ctrs.◘ Benefi ts from a radical asymmet-ric design concept.◘ Superior dynamic performance.◘ Increased stiffness.◘ Forged monobloc Aluminium alloy body.◘ Suits Ø355 x 32mm Iron discs.◘ Stainless Steel pistons. ◘ Stainless Steel wear plates.◘ Optional Carbon Duct kit.

PART NUMBERS- RHT = CP6267-6S0L.- LHT = CP6267-7S0L.


135.9

61

.90

'PL

'DIM

'N

126.8

R67.00

92.00

95.00

75.00R5.00

13

7.9

0

168.9

0

R14.50

R16.00

17

4.7

0

78.20

42

.00

180.00

Ø22.00

'U'D

IM'N

0.8

5x4

5°

MIN0

.85

x4

5°

MIN

43

.35

5.0

0°

145.0

0

RADIAL PROFILESCALED FOR A Ø380DISC (INCLUDESCARBON DUCT)

164.3

8 E

FF

EC

TIV

E R

AD

IUS

15.3

0°

0.7

5°

(1.42)Ø36.00

LEADING BORE

(1.75)Ø44.45

TRAILING BORE

Ø12.2012.10

R192.3

8(P

ATHW

AYRAD

IUS)

HYDRAULIC INLET-3 AEROQUIPSEE FITTING NOTESON INSTALLATIONDRAWING.

DRY BREAK FITTINGSEE FITTING NOTES ON

FULL INSTALLATION DRAWING.

DRY BREAK TO BE USED INCONJUNCTION WITH CP6300-7 BLEED SYSTEM

FITTING. FOR FURTHER DRY BREAK INFORMATION& SPARES REFER TO CP6300-13CD

DRAWING

TYPICAL MTGTIGHTENINGTORQUE FORGUIDANCE ONLYM12 - 65Nm & M10- 54Nm

MOUNT TRAILING CALIPERS BETWEEN50° TRAILING AND 4.5°LEADING TOACHIEVE OPTIMUM BLEED

MOUNT LEADING CALIPERSBETWEEN 50° TRAILING AND4.5°LEADING TO ACHIEVEOPTIMUM BLEED

4.50°

10.00

50.00°


jbennett

Note




20

+44 (0)24 7663 9595

20

BRAKE CALIPERS - Touring Car



Piston Area 50.1cm²Disc Diameter 378.0mmDisc Thickness 35.0mmWeight No Pads 2.9kgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 210.0mmMtg offset 35.0mmMtg hole Ø 12.15mm‘PL’ Dimension 63.5mm

SPARE PARTSS/Steel PistonsØ27.0mm CP6265-107Ø31.8mm CP6265-108Ø38.1mm CP6265-109Seal Repair Kit CP4518-CEJWear Plates x 4 CP5760-104Pad Retainer Wear Plate CP6078-106

Bleed Screw Kit CP3880-1




APPLICATIONS◘ Touring Car Front & Rear.◘ GT Front & Rear.

FEATURES◘ Radial mount, 210 x 35mm ctrs.◘ Benefi ts from a radical asymmet-ric design concept.◘ Superior dynamic performance.◘ Increased stiffness.◘ Reduced weight.◘ Forged monobloc Aluminium alloy body.◘ Suits Ø380 x 35mm disc.◘ Stainless Steel pistons. ◘ Stainless Steel wear plates.◘ 4lb Anti-Knockback springs fi tted.◘ Optional Carbon Duct kit.



CP66656 Piston, Forged Radi-CAL™

162.9 (6.41”)

80

.6(3

.17

”)

150.0 150.0


Ø31.75Ø26.99LEADING BORE

31

.04

41

.10

0.85x45°MINBOTH ENDS

12.2012.10

Ø

R192.0PATHW

AYRADIUS1

26

.50

‘U’

DIM

’N6

3.5

0‘P

L’D

IM’N

21

6.7

0M

AX

RADIAL PROFILESCALED FOR AN Ø380DISC

64.40 MAX

R1

25

.60

MIN

R1

37

.90

MIN

R1

84

.60

MA

X

R2

10

.50

MA

XR

21

3.2

0M

AX

16

3.5

0EFFEC

TIV

ER

AD

IUS

84.70 MAX53.25 MAX

107.50 MAX39.00MAX

7.40 MAX

210.00 MOUNTING HOLE CTRS

BLEED SCREW MAXTIGHTENING TORQUE 17Nm

TYPICAL MTG TIGHTENINGTORQUE FOR GUIDANCEONLY:M12 - 65NmM10 - 54Nm

Ø22.00

35

.00

OFFSET

A

B

3 OFF M4 x 0.70 HOLESPOSITIONED AS SHOWNFOR ATTACHING CUSTOMERWATER PIPES

SECTION A-A

SECTION B-B

HYDRAULIC

INLETM10x1.0

10.0

0FU

LLTH

REA

D

41.45 41.45

12.00° 12.00°



Piston Area 60.75cm²Disc Diameter 395mmDisc Thickness 40.0mmWeight No Pads 3.54KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 210.0mmMtg offset 44.0mmMtg hole Ø 12.15mm‘PL’ Dimension 76.0mm

SPARE PARTSPistons & Support Rings

Ø31.75mm CP6268-104 &CP3804-113

Ø34.0mm CP6268-105 & CP3804-114

Ø41.3mm CP6268-106 & CP3804-104

Seal Repair Kit CP8518-EFKPad AbutmentPlates x 4 CP6268-111

H Piece Pad Retainer Kit CP6268-20

Quick Release (Clip) Pad Retainer Kit

CP6268-21

Pad Supports x 4 CP6268-112Bleed Screw CP3880-1




CP62686 Piston, Forged Radi-CAL™ Front

TYPICAL APPLICATIONS◘ Touring Car.◘ GT.◘ Factory Competition Brake Kits.

FEATURES◘ Radial mount, 210 x 44mm ctrs.◘ Benefi ts from a radical asymmet-ric design concept.◘ Superior dynamic performance.◘ Increased stiffness.◘ Forged monobloc Aluminium alloy body.◘ Designed for Ø395 x 40mm Iron discs.- Also suitable for Carbon discs.◘ Stainless Steel pistons. ◘ Stainless Steel wear plates.◘ Dual pad retainer option. - H Piece - Quick Release clip.



163.75 (6.44")

66

.20

(2

.60

")

39

.80

0.8

5x4

5°

MIN

165.50 151

R2

17

.50

27.95

67.90

17

.20

52.85

28

58

R1

22

.50

30

.50

R2

12

.40

62

18

5.3

0

12

4

166.5

0 (

EF

FE

CT

IVE

RA

DIU

S) 76.0

‘PL’D

IM’N

121.5

0‘U

’DIM

’N

Ø12.2012.10

R151.95

R30.80

R93.5

0

22°

R2

R200 PATHWAY RADIUS

Ø22

LEADING BOREØ31.75 (1.250")

Ø34(1.339")

TRAILING BOREØ41.28 (1.625")

210


15TYPICAL MTG TIGHTENING

TORQUE FOR GUIDANCEONLY: M12 - 65Nm & M10 - 54Nm


M6x1.0 PAD RETAINERBOLTS. LUBRICATEWITH COPPER GREASE& TIGHTEN TO 10Nm

44

20°


Ø25RECOMMENDEDUPRIGHT BOSS


jbennett

Note


http://www.apracing.com/drawings/cp6268-11cd-iss1.pdf


21

www.apracing.com

21

BRAKE CALIPERS - 2 Piston

TECHNICAL SPECIFICATIONPiston Size Ø41.3mmPiston Area 26.8cm²Disc Dia. Ø254.0mmDisc Thickness 7.1mmDisc Pathway Radius 128.0mm

Weight No Pads 2.0Kg

Hydraulic Thread 3/8”x24UNF

Mounting Type LugMtg centres 89.0mmMtg offset 19.1mmMtg hole Ø 9.8mm‘PL’ Dimension 43.7mm

SPARE PARTSPistons CP2195-14Seal Repair Kit CP4508-KPad Retainer Split PinRetainer P/No. CP2696-160Bleed Screw CP3720-182



CP2505 - Cast Iron Body

TYPICAL APPLICATION◘ Formula Ford.

FEATURES◘ Lug mount, 89 x 19.1mm ctrs.◘ Cast iron body with a bright pas-sivated zinc surface treatment.◘ Suits Ø254mm x 7.1mm solid Iron disc.◘ Non handed.◘ Steel pistons.◘ Piston dirt seals fi tted.◘ Split pin pad retainer.◘ Interchangeable with CP3696-6E0.

PART NUMBER- CP2505-3S0L.

INSTALLATIONInstall with bleed screws at the top (swap with blanking plug as required) to enable a good bleed.

TECHNICAL SPECIFICATIONPiston Size / Piston Area

CP2576-3E0 Ø41.3mm / 26.76cm²

CP2577-3/-14E0 Ø44.5mm / 31.04cm²

CP3176-2E0 Ø38.1mm /22.8cm²

CP3177-2E0 Ø36.0mm / 20.35cm²

CP3178-2E0 Ø31.8mm / 15.83cm²

Disc Diameter Ø267mmDisc Thickness 9.7mmWeight No Pads 1.1KgHydraulic Thread 3/8”x24UNFMounting Type LugMtg centres 89.0mmMtg offset 24.6mmCP2577-14E0 20.6mmMtg hole Ø 9.6mm‘PL’ Dimension 49.9mmCP2577-14E0 48.5mm

SPARE PARTSPistonsCP2576-3E0 CP2576-105CP2577-3/-14E0 CP2577-102CP3176-2E0 CP3176-102CP3177-2E0 CP3177-102CP3178-2E0 CP3178-102Seal Repair KitCP2576-3E0 CP4518-KCP2577-3/-14E0 CP4518-LCP3176-2E0 CP4518-JCP3177-2E0 CP4518-HCP3178-2E0 CP4518-EPad Retainer R ClipRetainer P/No. CP2213-17Bleed Screw CP3720-182


INSTALLATION DRAWING FOR CP2577

CP2576, CP2577, CP3176, CP3177 & CP3178 - Lug Mount

TYPICAL APPLICATIONS◘ Rally / Circuit Rear.◘ CP2577-14E0 Formula Ford Front & Rear. (Interchangeable with CP2485-8/9S0)

FEATURES◘ Lug mount, 89mm ctrs.◘ Aluminium alloy body.◘ Non handed.◘ Suits Ø267 x 9.7mm solid disc. Versions are available for upto Ø300mm disc. ◘ Aluminium pistons.◘ Quick release ‘R’ Clip pad retainer.

PART NUMBERS- CP2576-3E0.- CP2577-3E0.- CP2577-14E0. - CP3176-2E0. - CP3177-2E0. - CP3178-2E0.


7.11DISC WIDTH7.11DISC WIDTH

19.11

12.7

R164.1

3M

AX

R164.1

3M

AX

R144.4

6M

AX

R144.4

6M

AX

R135.1

MIN

R135.1

MIN

R98.4

9M

INR

98.4

9M

IN

R78.9

MIN

R78.9

MIN

15° MIN15° MIN

22° MIN22° MIN

37° MIN37° MIN

16° MIN16° MIN

16°MIN16°MIN

47.22 MAX47.22 MAX

32.16 MAX32.16 MAX

12.54 MIN12.54 MIN

RADIAL PROFILE ON A Ø254.0MM DISCRADIAL PROFILE ON A Ø254.0MM DISC

11.58 MIN11.58 MIN

25.13 MAX25.13 MAX

45.7 MAX45.7 MAX

13° MIN13° MIN

19° MAX19° MAX

11° MIN11° MIN

13.8° MAX13.8° MAX

9°MAX9°MAX

R78.9

4M

INR

78.9

4M

IN

R102.9

2M

INR

102.9

2M

IN

R126.0

6M

AX

R126.0

6M

AX

R134.8

4M

AX

R134.8

4M

AX

R141.7

6M

AX

R141.7

6M

AX

R161.0

MA

XR

161.0

MA

X

27.97 MAX27.97 MAX

41.73 MAX41.73 MAX

14.7 MIN14.7 MIN

55.04 MAX55.04 MAX

34.23 MAX34.23 MAX

88.9588.8588.9588.85

66.0466.04

19.05 NOMTO TOP OFPAD MATERIAL

19.05 NOMTO TOP OFPAD MATERIAL

26

.64

NO

M2

6.6

4N

OM

‘U’

DIM

EN

SIO

NTO

AX

LEC

38

.31

‘U’

DIM

EN

SIO

NTO

AX

LEC

38

.31

R11.18NOMR11.18NOM

PAD PROFILEPAD PROFILE

Ø254.0

DISC

Ø254.0

DISC

107.9

5N

OM

107.9

5N

OM


TOP

OF

PA

D T

O B

E0.5

NO

MA

BO

VE D

ISC

O/D

DISC WIDTH 9.7

OFFSET

61.6 MAX

56.3 MAX

51.5 MAX

31.4 MAX

21.0 MAX50°

40.3 MAXRA

DIU

S 1

44

.5

RA

DIU

S 7

4.1

RA

DIU

S 1

34

.3

RA

DIU

S 1

50

.5

RA

DIU

S 7

5.4

EFFEC

TIV

E R

AD

IUS 1

04

.8

DIS

C C

L

DISC & WHEEL CL

88.95/88.85MTG HOLE CTRS

DISC OUTSIDE DIAMETER

Ø9.7/9.6MTG HOLE

DIM

N‘U

’D

IMN

‘PL’

59.00

89.00 89.00

59.00

RADIAL PROFILEON Ø254.0 X 9.7DISC

BLEEDSCREW TIGHTENINGTORQUE 17.0NM (12.5Lbft)

17

.00


jbennett

Note




22

+44 (0)24 7663 9595

22





CP3676 Ø41.3mm / 26.7cm²

CP3677 Ø44.5mm / 31.04cm²

CP4586 Ø36.0mm / 20.4cm²

CP4596 Ø31.8mm / 15.83cm²

Disc Diameter Ø267mmDisc Thickness 9.7mmWeight No Pads 1.1KgHydraulic Thread 3/8”x24UNFMounting Type RadialMtg centres 95.0mmMtg offset 30.5mmMtg hole Ø 10.1mm‘PL’ Dimension 47.33mm

SPARE PARTSPistonsCP3676 CP2576-105CP3677 CP2577-102CP4586 CP3177-102CP4596 CP3178-102Pad Retainer R ClipRetainer P/No. CP2213-17Seal Repair KitCP3676 CP4518-KCP3677 CP4518-LCP4586 CP4518-HCP4596 CP4518-EBleed Screw CP3720-182

CP3676, CP3677, CP4586 & CP4596 Radial Mount

TECHNICAL SPECIFICATIONPiston Size Ø41.3mmPiston Area 26.7cm²Disc Diameter Ø267mmDisc Thickness 7.1mmWeight No Pads 800gHydraulic Thread 3/8”x24UNFMounting Type LugMtg centres 89.0mmMtg offset 19.1mmMtg hole Ø 10.15mm‘PL’ Dimension 45.5mm

SPARE PARTSPistons CP3696-105Seal Repair Kit CP4518-KPad Retainer R ClipRetainer P/No. CP3696-106Bleed Screw CP3720-182



CP3696 - Lug Mount

TYPICAL APPLICATIONS◘ Lightweight Single Seater Front.◘ Rally / Circuit Rear.

FEATURES◘ Radial mount, 95 x 30.5mm ctrs.◘ Aluminium alloy body.◘ Non handed.◘ Suits Ø267 x 9.7mm solid disc. Versions are available for upto Ø300mm disc. ◘ Aluminium pistons.◘ Quick release ‘R’ Clip pad retainer.

PART NUMBERS- Ø41.3mm Bore - CP3676-4E0.- Ø44.5mm Bore - CP3677-4E0. - Ø36.0mm Bore - CP4586-4E0.- Ø31.8mm Bore - CP4596-4E0.


TYPICAL APPLICATIONS◘ Formula Ford.◘ Rear of lightweight FWD Cars.

FEATURES◘ Lug Mount, 89 x 19.1mm ctrs.◘ Non handed.◘ Two piece Aluminium alloy body.◘ Suits Ø267mm x 7.1mm solid disc.◘ Aluminium alloy pistons.◘ R’ Clip pad retainer.◘ Interchangeable with CP2505-3S0.

PART NUMBERS- CP3696-6E0.



jbennett

Note




23

www.apracing.com

23


TECHNICAL SPECIFICATIONPiston Size Ø36.0mmPiston Area 20.4cm²Disc Diameter Ø300mmDisc Thickness 16.0mmWeight No Pads 1.1KgHydraulic Thread M10 x 1.0Mounting Type RadialMtg centres 95.0mmMtg offset 33.65mmMtg hole Ø 10.20mm‘PL’ Dimension 46.73mm

SPARE PARTSPistons CP5569-111Seal Repair Kit CP4518-HPad Retainer R ClipRetainer P/No. CP4140-110Bleed Screw CP3880-1Wear Plates x 4 CP5586-104Wear Plate Bolt x 4 CP5166-108



CP5928 - Billet Body

TYPICAL APPLICATIONS◘ Touring Car Rear.◘ Rally Rear.◘ Lightweight Single Seater Front.

FEATURES◘ Radial mount, 95 x 33.65mm ctrs.◘ Billet two piece Aluminium alloy body.◘ Non handed.◘ Suits Ø300.0 x 16.0mm ventilated Iron disc. ◘ Aluminium pistons.◘ Quick release ‘R’ Clip pad retainer.◘ Stainless steel wear plates fi tted.◘ M10 to 3/8” fi tting included.

PART NUMBERS- CP5928-5E0.


54.28 MAX35.53

25.46 MAX

59.22 MAX

51

.00

2.0

0

R8.90

34.03MAX 23.89

43.65

93

.00

MIN

95

.56

MIN1

52

.32

MA

X

16

5.5

0M

AX

DISC & WHEEL CDISC & WHEEL C

LL

RADIAL PROFILEFOR Ø290.0D DISC

90.00 90.00

Ø36.00 BORETOP OF DISC TOBR 0.50 BELOW TOPOF PAD MATERIAL

46

.73

‘PL

DIM

N’

5.2

9

2.2

0

‘U’

DIM

N

EFFE

CTIV

ERA

DIU

S

Ø30

0.00

DISC

MA

X


BLEE SCREWSHOULD ALWAYSBE FITTED TO TOPMOST PORT

33

.65

OFFSET

95.00 ±0.05 MTG CTRS

10.20 ±0.05 MTG HOLEØ19.00C/BORE

CP6160-107 (INCLUDED)M10 TO 0.375" FITTING

ITS ADVISABLE TO WIREPAD CLIP IN POSITION

BLEED SCREW TIGHTENINGTORQUE 17Nm (12.5LbFt)


CP6120 & CP6126

Ø44.5mm / 31.04cm²

CP6121 Ø38.1mm / 22.8cm²

Disc Diameter Upto Ø282mmDisc Thickness

CP6120 / CP6121 12.7mmCP6126 17.8mmWeight No Pads 1.5KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 130.0mmMtg offset

CP6120 / CP6121 20.9mmCP6126 23.86mmMtg hole Ø 10.1mm‘PL’ Dimension 50.51mm

SPARE PARTSPistonsCP6120 CP5235-108CP6121 CP6121-104CP6126 CP5119-104Pin Pad Retainer Part No

CP6120 / CP6121 CP6120-103CP6126 CP5119-107Seal Repair Kit

CP6120 / CP6126 CP4518-LCP6121 CP4518-JBleed Screw CP3880-1Fluid Pipe

CP6120 / CP6121 CP6120-6CP6126 CP5119-123


INSTALLATION DRAWING - CP6120-2/3S0For CP6121 & CP6126 drawings visit www.apracing.com

CP6120 & CP6121 - Solid DiscCP6126 - Ventilated Disc

77.3 (3.04”)

60

.3 (

2.3

7”)

TYPICAL APPLICATIONS◘ Formula Ford.◘ Rally Rear.◘ CP6126 Suitable for Lightweight Sportscars.

FEATURES◘ Radial mount, 130 x 20.9mm ctrs.◘ Two piece cast Aluminium alloy body.◘ CP6120 & CP6121 suitable for solid disc up to Ø282 x 12.7mm, max thickness.◘ CP6126 suitable for ventilated discs upto Ø280mm x 17.8mm, max thickness. ◘ Aluminium pistons.◘ High temperature / low drag seals fi tted as standard.◘ Version with pipe protection available for CP6120 family only.

PART NUMBERS◘ Caliper with Ø44.5mm pistons for Solid Disc:- CP6120-2S0 RHT / LHL.- CP6120-3S0 LHT / RHL.

◘ Calipers with Ø38.1mm pistons for Solid Disc:- CP6121-2S0 RHT / LHL.- CP6121-3S0 LHT / RHL.

◘ Calipers with Ø44.5mm pistons for Vented Disc:- CP6126-2S4 RHT / LHL.- CP6126-3S4 LHT / RHL.


50.5

1D

IM'N

'PL'

97.49 MAX 92.16 MAX

90.5

0 D

IM'N

U

DISC PATHW

AY RADIUS 143.50

OUTS

IDE D

ISC D

IAM

ETER Ø

282.00

20.90

41.0

0

20

.90

OFFSET

130.00 MTG HOLE CENTRES

19.50C/BORE

10.1510.05MOUNTING HOLES

59.94 MAX 59.94 MAX

DISC & WHEEL C

Ø

L

33.00 MAX

R1

53

.00

MA

X

R7

7.1

4 M

IN7

4.1

4 M

IN

40.00 MAX

56.84MAX

R1

27

.00

MA

X

R8

3.0

0 M

IN

10

6.2

0 E

FFEC

TIV

E R

AD

IUS

20.90OFFSET

13

5.2

4

40.0

0°

33.00 MAX

DISC & WHEEL CL

RADIAL PROFILEDRAWN TO SCALEFOR A Ø261.00


jbennett

Note



http://www.apracing.com/drawings/CP5928-5cd.pdf

24

+44 (0)24 7663 9595

24

AP Racing’s “Historic” Range of calipers are detailed below. These “Classic” items, such as CP2383 and CP2561 and have been reintroduced due to the popularity of various historic racing categories. The “Historic” Range of calipers are usually made to order, however some calipers are stock items, please check availability with AP Racing fi rst. Spare part details for the calipers detailed can be found on page 34 to 39.

CP2382 and CP23832 Piston Calipers.


Ø50.8mmx 2

Disc Dia.Max Ø266.7mmMin Ø254.0mmDisc ThicknessCP2382 20.7mmCP2383Max 11.2mmMin 9.7mmWeight (No Pads) 1.8Kg

Hydraulic Thread

3/8”x24UNF

Mounting Type Lug

Mounting centres 88.9mm

Mounting offsetCP2382 29.7mmCP2383 24.9mmMtg hole Ø 11.27mm‘PL’ Dim’n 54.1mmSeal Repair Kit CP4518-N

Pad Family - CP2372D52Pad Thickness = 15.9mm

CP25612 Piston Caliper.


Ø38.1mmx 2

Disc Dia. Ø278.0mmDisc ThicknessMax 25.4mmMin 22.8mmWeight (No Pads) 1.17Kg

Hydraulic Thread M10x1.0

Mounting Type Radial

Mounting centres 88.9mm

Mounting offset 50.0mm

Mtg hole Ø 9.6mm‘PL’ Dim’n 26.0mm

Seal Repair Kit CP4518-J

Pad Family - CP2554Pad Thickness = 16.8mm



Ø41.3mmx 4

Disc Dia.Max Ø302.0mmMin Ø260.0mmDisc Thickness 28.0mm

Weight (No Pads) 2.7Kg

Hydraulic Thread

3/8”x24UNF

Mounting Type Blank Lug

Mounting centres

76.2 / 94.0mm

Mounting offset

33.3 / 42.4mm

Mtg hole Ø N / A‘PL’ Dim’n

66.3 / 85.6mm

Seal Repair Kit

CP4518-KK





Ø44.5mmx 4



Hydraulic Thread

3/8”x24UNF

Mtg Type Blank LugMounting centresMax 88.9mmMin 80.3mmMounting offsetMax 50.0mmMin 35.8mmMtg hole ØMax 12.7mmMin 10.1mm‘PL’ DimensionMax 86.4mmMin 70.6mmSeal Repair Kit

CP4518-LL




Ø38.1mm x 4



Hydraulic Thread

3/8”x24UNF


Mounting centres

76.2 / 94.0mm

Mounting offset

33.3 / 42.4mm

Mtg hole Ø N / A‘PL’ Dim’n

66.3 / 85.6mm

Seal Repair Kit

CP4518-JJ



Ø38.1mmx 4



Hydraulic Thread

3/8”x24UNF


Mounting centres

76.2 / 94.0mm

Mounting offset

28.7 / 31.2mm

Mtg hole Ø N / A‘PL’ Dimension

55.1 / 81.2mm

Seal Repair Kit

CP4518-JJ

Pad FamilyCP2340D43 or D51Pad Thickness = 15.9mm

APPLICATIONS◘ CP2382, Escort Rear, Grp 4 Rally Vented Disc.◘ CP2383, Escort Rear, Grp 4 rally Solid Disc.

FEATURES◘ Lug mount.◘ Cast Aluminium alloy body.◘ Aluminium alloy pistons.◘ Hard anodised surface treatment.

PART NUMBERS◘ Vented Disc.- CP2382-12E4, RH & -13E4, LH◘ Solid Disc.- CP2383-12E4, RH & -13E4, LH.

APPLICATIONS◘ Historic Formula One, Balanced Braking from 1977 - 1985.

FEATURES◘ Lug mount.◘ Balanced braking (2 Calipers per disc).◘ Cast Aluminium alloy body.◘ Hard anodised surface treatment.◘ R Clip pad retainer.◘ High temperature seals.

PART NUMBER

- CP2561-3S4.

APPLICATIONS◘ Rally.◘ Sports GT.◘ Saloons.

FEATURES◘ Closed back aluminium alloy body.◘ Blank lug mount.◘ Ø41.3mm Aluminium alloy pistons.◘ High temperature seals.◘ Hard anodised surface treatment.

PART NUMBERS

- Right Hand.CP2270-144S4QR- Left Hand.CP2270-145S4QR

APPLICATIONS◘ Rally.◘ Sports GT.◘ Saloons.

FEATURES◘ Closed back Aluminium Alloy body.◘ Blank lug mount.◘ Ø38.1mm Aluminium Alloy pistons.◘ Hard anodised surface treatment.

PART NUMBERS


APPLICATIONS◘ Sports GT.

FEATURES

◘ Closed back Aluminium Alloy body.◘ Blank lug mount.◘ Ø44.5mm Aluminium alloy pistons.◘ Hard anodised surface treatment.

PART NUMBER

- Non HandedCP2279-400S4BP

APPLICATIONS◘ Rally.◘ Sports GT.

FEATURES◘ Closed back Aluminium Alloy body.◘ Blank lug mount to suit 13” wheels.◘ Ø38.1mm Aluminium Alloy pistons.◘ Hard anodised surface treatment.

PART NUMBERS


132.27 (5.20”)

55

.75

(2.1

9”)

76.3 (3.00”)

66

.0(2

.60

”)

126.7 (4.98”)

55

.8(2

.19

”)

126.7 (4.98”)

55

.8(2

.19

”)

BRAKE CALIPERS - Historic Race

jbennett

Note





http://www.apracing.com/drawings/cp2271.pdf



25

www.apracing.com

25

THE RANGEThe calipers detailed on pages 25 to 30 are the most popular from within the range but not all are listed. If your requirements differ form those listed then please contact AP Racing Road Car Technical Section, page 169.

INTRODUCTION.Competition is the best of test-beds, and AP Racing’s years of close involvement with motorsport also bring benefi ts for the latest high performance road cars, aftermarket and armoured vehicles. The emphasis may be different, qualifi ed by the everyday demands of modern road conditions, but the essential requirements remain the same. With a dedicated Road Car and Armoured team of engineers and designers AP Racing helps to bring extraordinary capability to extraordinary cars like, Ascari, Aston Martin, Bugatti, Caterham, Ford, HSV, Koenigsegg, Noble, Morgan, Lotus, PSV, Seat and TVR, to name a few. In both brake and clutch requirements AP Racing takes pride in dealing with such prestigious com-panies and have the systems in place to offer our customers the best possible service available from a proven OE, Aftermarket & Armoured brake system supplier.

DESIGN & DEVELOPMENT.The whole process of design and development is carried out at our headquarters in Coventry. With two brake dynomometers we are able to reproduce the most demanding test environments. AP Racing designers use the latest computer technology to produce aesthetic and effective brake calipers at the affordable prices the markets demands.

MANUFACTURING.The purpose built manufacturing facilities for AP Racing Road Car and Armoured Vehicle products benefi t from manufacturing tech-niques and systems that enable AP Racing the ability to produce brake calipers for models in production at up to 10,000 vehicles per annum.

IMPORTANT SAFETY NOTE FOR CUSTOMERS.All AP Racing brake calipers are designed and exhaustively tested to ensure they meet a set of specifi ed parameters for both strength and durability. It is important when selecting a brake caliper to ensure that the relevant operating parameters are not exceeded on the application on which the product is to be installed. Technical Data Sheets for Road calipers can be found on our website www.apracing.com/bctds.It is the responsibility of the person specifying these products for a given application to ensure that the design parameters of the product are not exceeded.TECHNICAL DATA SHEETS - BRAKE CALIPERSEach Technical Data Sheet is specifi c to a caliper or family of calipers and details the maximum working pressure and maximum brake torque for each caliper. In addition they also include a guide to the typical gross vehicle weight to which this relates. These guides assume the application to be a standard passenger vehicle fi tted with road tyres and therefore de-celeration rates above 13m/s² (1.3g) will not be achievable.

BRAKE CALIPERS - Performance Road / Armoured Vehicle - General Information & 2 Piston

ARMOURED VEHICLESAP Racing can now engineer unique solutions for various Armoured or Defence applications, to a customers own specifi c criteria and require-ments. With various heavy duty brake systems available, solutions can be designed and developed based on our specifi c Armoured Car / Heavy Duty Vehicle testing procedures.With careful consideration of the specifi c levels of armouring and weight increases, AP Racing can develop a brake system to effectively function in the environments and scenarios experienced by these vehicles. AP Racings motorsport and OEM experiences breeds excellence which leads to exciting designed tried and tested brake and clutch packages for a selection of vehicles including:Land Cruiser 76. / - Land Cruiser 200. / - Hilux.

Please contact:Matthew Dodd for further details and technical information: Tel: +44 (0)24 7688 3339E-Mail: [email protected]

TECHNICAL SPECIFICATIONPiston Sizes Ø44.5 x 2Piston Area 31.11cm²Disc Diameter Ø282.0Disc Thickness 10.0mmWeight No Pads 1.6KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 130.0mmMtg offset 33.75mmMtg hole Ø 10.2mm‘PL’ Dimension 50.51mm

SPARE PARTSPistons CP5119-104Seal Repair Kit CP4519-LPad Retainer PinRetainer P/No. CP5119-144Bleed Screw CP3720-173Fluid Pipe CP5111-12


CP51192 Piston, Suits Solid Discs

TYPICAL APPLICATION◘ Road Lightweight Front or Rear.

FEATURES◘ Radial mount, 130 x 33.75mm ctrs.◘ Suits Ø282mm x 10mm solid disc.◘ Aluminium alloy body.◘ Aluminium alloy pistons.◘ Piston dirt seals fi tted.◘ Advanced paint fi nish, protects against corrosion.◘ Pad supports / retained on pins.

PART NUMBERSRHT - CP5119-12S4BK.LHT - CP5119-13S4BK.

INSTALLATIONIt is important to select the correct ‘hand’ of caliper so that the bridge pipe is below the caliper and bleed screws are at the top to enable a good hydraulic bleed.


77.3 (3.04”)

60

.3 (

2.3

7”)

91.00 MAX

89.95 MAX

69.00 MAX

38.80 NOM

38.00 NOM

36.50 MAX

15.85 MAX

R1

42

.50

MA

X

R1

31

.50

MA

X

R1

01

.00

MIN

R8

6.0

0M

IN

R6.00TYP

70.45 MAX

33.75 16.50MAX

R8

3.0

0M

IN

R8

6.0

0M

IN

R9

4.5

0M

IN

R1

13

.50

MA

X

R1

16

.00

EFFEC

TIV

ER

AD

IUS

R1

61

.50

MA

X

41

.00

97.50 MAX

Ø44.50 (1.75”)

93.00 MAX

50

.51

‘PL’

DIM

’N

90

.50

‘U’

DIM

’N(Ø

28

2D

ISC

)

R143.50

DISCPATH

WAY

DISC & WHEEL CL

CALIPER RADIAL PROFILETO SUIT Ø282.0 DISC

130.0 / 129.95 MTG HOLE CENTRES

CALIPERINLET

33

.75

OFFSET

Ø10.2510.15

MTG HOLE

Ø19.50C/BORE

BLEED SCREW TIGHTENINGTORQUE17.0Nm (12.5lbs/ft)

ALL CALIPERS ARELASER ETCHED TOSHOE PART No.SERIAL No. ANDDISC DIRECTIONALARROW


jbennett

Note


http://www.apracing.com/drawings/cp5119-29cd%20-%20Sheet1.pdf

26

+44 (0)24 7663 9595

26


TECHNICAL SPECIFICATIONPiston SizesCP5316 Ø38.1mmCP5317 Ø41.3mmPiston AreaCP5316 22.8cm²CP5317 26.8cm²Disc Diameter Ø332.0Disc Thickness 26.0mmWeight No Pads 1.5KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 130.0mmMtg offset 27.5mmMtg hole Ø 10.1mm‘PL’ Dimension 50.5mm

SPARE PARTSPistonsCP5316 CP5218-104CP5317 CP5317-103Seal Repair KitCP5316 CP4519-JCP5317 CP4519-KPad Retainer ClipRetainer P/No. CP5119-134Bleed Screw CP3720-173Fluid Pipe CP5317-10


CP5316 & CP53172 Piston, Suits Ventilated Discs

77.3 (3.04”)

60

.3 (

2.3

7”)

27.5

0O

FFSET

R166.00REF. M

AX. D

ISC

50.5

0`P

L'D

IMN

TOP

OF

PA

D/D

ISC

.

UP

RIG

HT

DIM

EN

SIO

N(`

U' D

IMN

.)

94.00 MAX.99.00 MAX.

130.00 MTG HOLE CENTRES

Ø10.10

188.0

0M

AX

.

171.3

0M

AX

.

111.3

0M

IN.

108.3

0M

IN.

45.50 MAX.

64.50 MAX.

26.00 REF. DISC

41.50 MAX.

142.0

0EFFEC

TIV

ER

AD

IUS

126.3

0M

IN.

158.8

0M

AX

.

65.50 MAX.

56.50 MAX.

77.00 MAX.

139.9

0M

AX

.

120.4

0M

IN.

61.50 MAX.

R6.00

R6.00

CALIPER RADIALPROFILE ASFITTED ONØ332.00 DISC.

TYPICAL APPLICATION◘ Road Lightweight Front or Rear.

FEATURES◘ Radial mount, 130 x 27.5mm ctrs.◘ Suits Ø332mm x 26mm disc.◘ Aluminium alloy body.◘ Aluminium alloy pistons.◘ Piston dirt seals fi tted.◘ Advanced Red or Black anti-corrosion paint fi nish◘ Pin pad retainer with ‘R’ Clip.

PART NUMBERS◘ For Black calipers- With Ø38.1mm Pistons. - CP5316-2S0 RHT or LHL. - CP5316-3S0 LHT or RHL.- With Ø41.3mm Pistons. - CP5317-2S0 RHT or LHL. - CP5317-3S0 LHT or RHL.

◘ For Red calipersadd ‘R2’ to end of part number e.g CP5316-2S0R2.

CALIPER HANDINGIt is important to select the correct ‘hand’ of caliper so that the bridge pipe is below the caliper and bleed screws are at the top to enable a good hydraulic bleed.

BRAKE CALIPERS - Performance Road - 2 & 4 Piston

TECHNICAL SPECIFICATIONPiston Size Ø38.1mm x 4Piston Area 45.6cm²Disc Diameter Ø295.0mmDisc Thickness 25.4mmWeight No Pads 1.9KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 130.0mmMounting offset 47.4mmMtg hole Ø 10.1mm‘PL’ Dimension 53.05mm

SPARE PARTSPistons CP2409-160Seal Repair Kit CP4519-JJAKB Spring Kit - CP6518-4LBLL

Wear Plates

CP5100-210 x 2 CP5100-211 x 2

Pad Retainer BoltRetainer P/No. CP5100-117Ret / Bolt P/No. CP5100-120Bleed Screw CP3720-173Fluid Pipe CP5100-10



RADIAL PROFILE DIM’N

Disc Ø 295.0 x 22.9

295.0 x 25.4

W1 67.75 69.3W2 70.2 71.8W3 47.3 48.9R1 96.7 96.7R2 100.7 100.7R3 151.5 151.5R4 166.3 166.3EFF RAD 125.15 125.15

CP5100 4 Piston, 130mm Radial Mount

RADIAL PROFILETO SCALE ON AØ295.0x25.4 DISC

W1 MAX W2 MAX

W3 MAX

RA

DIU

SR

4M

AX

RA

DIU

SR

3M

AX

RA

DIU

SR

2M

IN

RA

DIU

SR

1M

IN

DISC & WHEEL CL

EFFEC

TIV

ER

AD

IUS

OFFSET

MTG HOLE CENTRES - 130.00Ø10.10MTG HOLE

DISC & WHEEL CL

DIM

N‘U

’5

3.4

DIM

N‘P

L’

25

.30

TOP

OF

DIS

C&

PA

DM

ATL

DISC ROTATION

RADIUS ‘N’ 150.0

RADIUS R4

117.0

DISCO

UTSIDE DIAMETER

117.0

IMPORTANT NOTEDISC & CALIPER MOUNTINGTOLERANCES TO BE SUCHTHAT DISC IS CENTRAL TOCALIPER TO WITHIN ±0.5MM

DISC WIDTH

TIGHTENEDTO A TORQUEOF 13.1Nm

PAD RETAININGBOLTS SHOULDBE

9.7Lb/ft)

TYPICAL APPLICATION◘ Performance Road Front or Rear.

FEATURES◘ Radial mount, 130 x 47.4mm ctrs.◘ Suits Ø295mm x 25.4m iron discs.◘ Cast Aluminium alloy body, ◘ Staggered equal bores.◘ Aluminium Alloy pistons with dirt seals fi tted.◘ Advanced Red or Black anti-corrosion paint fi nish◘ Steel wear plates.◘ Pad anti-rattle clip fi tted.

PART NUMBERS◘ For Black Calipers- Suits Ø295 x 25.4mm disc. RHT = CP5100-806S4.LHT = CP5100-807S4.RHL = CP5100-808S4.LHL = CP5100-809S4.

◘ For Red Calipers- add ‘R2’ to end of part number e.g CP5100-806S4R2


113.47 (4.47”)

52.1

0 (

2.0

5”)


jbennett

Note




27

www.apracing.com

27



TECHNICAL SPECIFICATIONPiston Size Ø38.1mm

Ø41.3mmPiston Area 49.56cm²Disc DiameterMax Ø330.0mmMin Ø304.0mmDisc Thickness-802/3/4/5S4 32.0mm-806/7/8/9S4 28.0mm-810/1/2/3S4 32.0mmWeight No Pads 2.4KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 152.0mmMounting offset-802/3/4/5S4 50.93mm-806/7/8/9S4 46.86mm-810/1/2/3S4 50.93mmMtg hole Ø 10.1mm‘PL’ Dimension 60.36mmSPARE PARTSPistonsØ38.1mm See Page 37

for Part Nos.Ø41.3mmSeal Repair Kit CP4519-JKAKB Spring Kit - CP6518-4LBLL

Wear Plates CP5200-306 x 2 / -307 x 2

Pad Retainer BoltRetainer Part No.-802/3/4/5S4 CP5200-110-806/7/8/9S4 CP5200-124-810/1/2/3S4 CP5200-110Retainer Bolt Part No.-802/3/4/5S4 CP3894-139-806/7/8/9S4 CP3596-112-810/1/2/3S4 CP3894-139Bleed Screw CP3720-173Fluid Pipes-802/3/4/5S4 CP5200-6-806/7/8/9S4 CP5200-16-810/1/2/3S4 CP5200-6


Disc Ø 304 x32

330 x 28

330 x 32

W1 75.7 71.7 75.7W2 74.2 70.2 74.2W3 52.75 48.75 52.75R1 97.3 109.8 109.8R2 100.3 112.8 112.8R3 161.7 171.0 171.0R4 176.0 185.5 185.5EFF RAD 126.4 139.0 139.0

CP5200 4 Piston, 152mm Radial Mount

135.50 135.50

TOP

OF

DIS

C&

PA

DM

AT’

L

30

.36

60

.4D

IMN

‘PL’

DIM

N‘U

’

DISCPATH

WAY RADIUS ‘N

’

RADIUS R4 REF

DISC ROTATION

DISC OUTSIDE DIAMETER

DISC & WHEEL CL

OFFSET

Ø10.1MTG HOLE

MTG HOLE CTRS 152.00

PAD RETAINING BOLTS SHOULDBE TIGHTENED TO A TORQUE OF13.0Nm (9.7 Lb/ft)

CALIPER RADIALPROFILE

DISC & WHEEL CL

EFFEC

TIV

ER

AD

IUS

RA

DIU

SR

1M

IN

RA

DIU

SR

2M

IN

RA

DIU

SR

3M

AX

RA

DIU

SR

4M

AX

W1 MAX W2 MAX

W3 MAX

DISC WIDTH

TYPICAL APPLICATION◘ Performance Road Front.

FEATURES◘ Radial mount, 152mm ctrs.◘ To suit Ø330 / 304mm x 32 / 28mm iron disc.◘ Cast Aluminium alloy body.◘ Aluminium Alloy pistons with dirt seals fi tted.◘ Advanced Red or Black anti-corrosion paint fi nish◘ Steel wear plates.◘ Pad anti-rattle clip fi tted.

PART NUMBERS◘ For Black Calipers- Suits Ø330 x 32mm disc. CP5200-802S4 RHT /-803S4 LHT /-804S4 RHL /-805S4 LHL- Suits Ø330 x 28mm disc. CP5200-806S4 RHT /-807S4 LHT /-808S4 RHL /-809S4 LHL- Suits Ø304 x 32mm disc. CP5200-810S4 RHT /-811S4 LHT /-812S4 RHL /-813S4 LHL

◘ For Red Calipers - add ‘R2’ to end of part number, e.g CP5200-806S4R2.


BRAKE CALIPERS - Performance Road - 4 Piston

TECHNICAL SPECIFICATIONPiston Sizes Ø38.1mmPiston Area 45.6cm²Disc Diameter Ø295.0Disc Thickness 24.0mmWeight No Pads 2.6KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 130.0mmMtg offset 47.4mmMtg hole Ø 10.1mm‘PL’ Dimension 53.0mm

SPARE PARTSPistonsØ38.1mm CP6200-104Seal Repair Kit CP4525-JJPad Retainer PinRetainer P/No. CP7600-109

Wear Plates CP7605-117 x 4

Bleed Screw Kit CP3880-1Fluid Pipe CP7601-11



CP7600 4 Piston, Suits Ø295x24mm Discs

R147.50 REF MAX

DISC

53.0

0'P

L'D

IMN

.TO

PO

FP

AD

/DIS

C

UP

RIG

HT

DIM

EN

SIO

N('

U'D

IMN

.)

228.00 MAX.

130.00 MOUNTING CTRS

75

.00

MA

X.

47.4

OFFSET

Ø10

.10

47.00 MAX

72.00 MAX

95.0

0M

IN

98.0

0M

IN

17

0.0

0M

AX

147.0

0M

AX

30.00°

11

0.0

0M

IN

48.00 MAX

24.00 REFDISC

EFFEC

TIV

ER

AD

IUS

CALIPER RADIAL PROFILE AS FITTED ON Ø295.00 DISC


FEATURES◘ Radial mount, 130 x 47mm ctrs.◘ Suits Ø295mm x 24mm iron disc.◘ Cast Aluminium alloy body.◘ Aluminium alloy pistons.◘ Boot type dirt seals fi tted.◘ Advanced Red or Black anti-corrosion paint fi nish◘ Steel wear plates.◘ Pad anti-rattle clip fi tted.

PART NUMBERS◘ For Black Calipers- CP7600-2S0 RHT.- CP7600-3S0 LHT.- CP7600-4S0 RHL.- CP7600-5S0 LHL.

◘ For Red Calipers- add ‘R2’ to end of part number e.g CP7600-2S0R2.



jbennett

Note




28

+44 (0)24 7663 9595

28

TECHNICAL SPECIFICATIONWeight No Pads 3.35KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 195.0mmMounting offsetCP8540-2/3/4/5CP8560-2/3/4/5 34.0mmCP8530-2/3/4/5CP8540-6/7/8/9 36.0mm

Mtg hole Ø 12.1mm‘PL’ Dimension 55.0mmSPARE PARTSPistonsØ27.0mm CP7555-106Ø28.6mm CP8336-111Ø31.8mm CP8336-116Ø38.1mm CP8335-110Ø41.3mm CP8335-111Seal Repair KitsCP8530 Calipers CP4527-JKCP8540 Calipers CP4527-DECP8560 Calipers CP4527-CCPad Retainer PinRetainer P/No. CP8335-116H Piece - See website for details.Bleed Screw Kit CP3880-1Fluid Pipes

CP8530-2/4 & CP8540-6/8 - CP8530-10CP8530-3/5 & CP8540-7/9 - CP8530-11CP8540-2/4 & CP8560-2/4 - CP8540-10CP8540-3/5 & CP8560-3/5 - CP8540-11

INSTALLATION DRAWING FOR CP8540-2/3/4/5


CP8530, CP8540 & CP8560 4 Piston, World Radi-CAL™ Calipers

TYPICAL APPLICATIONS◘ Road Front or Rear.◘ Factory Big Brake kit Front or Rear.

FEATURES◘ Benefi ts from a radical asymmetric design concept.◘ Radial mount, 195mm ctrs.◘ Suits Ø400mm x 28mm or 32mm disc.◘ Forged Aluminium alloy body.◘ Aluminium alloy pistons.◘ Boot type dirt seals fi tted.◘ Advanced Red or Black anti-corrosion paint fi nish◘ Steel wear plates.◘ Pad anti-rattle clip fi tted.


BRAKE CALIPERS - Performance Road - 4 and 6 Piston




Piston SizeØ27.0mmØ31.8mmØ38.1mm

Piston Area 50.1cm²Disc Diameter Ø362.0mmDisc Thickness-802/3/4/5S4 36.0mm-814/5/6/7S4 32.0mmWeight No Pads 2.8KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 152.0mmMounting offset-802/3/4/5S4 55.0mm-814/5/6/7S4 53.2mmMtg hole Ø 12.1mm‘PL’ Dimension 62.5mm


AKB Spring Kit - CP6518-4LBSSL

Wear Plates x 4 CP5555-120Pad Retainer BoltRetainer Part No.-802/3/4/5S4 CP5555-109-814/5/6/7S4 CP5555-126Retainer Bolt Part No.-802/3/4/5S4 CP5200-101-814/5/6/7S4 CP3894-139Bleed Screw CP3720-173Fluid Pipes-802/3/4/5S4 CP5555-10-814/5/6/7S4 CP5555-11


Disc Ø 362 x 32.

362 x 36

W1 79.8 81.5W2 78.3 80.0W3 58.8 60.5W4 59.0 60.7R1 125.0 125.0R2 128.0 128.0R3 183.5 183.5R4 205.5 205.5EFF RAD 155.85 155.85

CP5555 6 Piston, Suits Ø362mm Discs

DISC & WHEEL CL

W1 MAX W2 MAX

W3 MAX

W4 MAX

RA

DIU

SR

1M

IN

RA

DIU

SR

2M

IN

RA

DIU

SR

3M

AX

RA

DIU

SR

4M

AX

DISC & WHEEL CL

EFFEC

TIV

ER

AD

IUS

RADIAL PROFILETO SCALE FOR AØ362.0 X 35.56 DISC

OFFSET

12.10MTG HOLEØ22.00 S/FACE

MTG HOLE CENTRES

RADIUS R4

DISCPATHWAY

DISCO

UTSIDE DIAMETER

DISC ROTATION

DIM

N‘U

’

47.2

0

62.5

0D

IMN

‘PL’

TOP

OF

PA

DM

ATL

&D

ISC

141.50 MAX 141.50 MAX


FEATURES◘ Radial mount, 152mm ctrs. ◘ Suits Ø362mm x 32 / 36mm iron disc.◘ Cast Aluminium alloy body.◘ Aluminium alloy pistons with dirt seals fi tted.◘ Advanced Red or Black anti-corrosion paint fi nish.◘ Steel wear plates◘ Pad anti-rattle clip fi tted.

PART NUMBERS◘ For Black Calipers- To suit Ø362 x 36.0mm disc. CP5555-802S4 RHT /-803S4 LHT /-804S4 RHL /-805S4 LHL

- To suit Ø362 x 32.0mm disc. CP5555-814S4 RHT /-815S4 LHT /-816S4 RHL /-817S4 LHL



PART NUMBERS & PISTON INFORMATIONPart No. Piston Sizes

(mm)Piston Area

Max Disc Ø x Thickness (mm)

CP8530-2/3/4/5S0BK or R2 Ø38.1 / Ø41.3 49.56cm² 400 x 32mmCP8540-2/3/4/5S0BK or R2 Ø28.6 / Ø31.8 28.8cm² 400 x 28mm CP8540-6/7/8/9S0BK or R2 Ø28.6 / Ø31.8 28.8cm² 400 x 32mmCP8560-2/3/4/5S0BK or R2 Ø27 / Ø27 22.9cm² 400 x 28mm

R190.00 REF DISC

195.00 MOUNTING HOLE CENTRES

OF

FS

ET

302.00 MAX106.35 MAX96.50 MAX88.50 MAX83.00 MAX

91.50 MAX80.50 MAX

12.50 MAX23.50 MAX38.35 MAX

16.00 MAX24.50 MAX

38.35 MAX49.50 MAX

28.50 MAX

218.5

0 M

AX

126.5

0M

IN133.0

0 M

IN195.5

0M

AX

200.5

0 M

AX

208.5

0 M

AX

126.5

0M

IN133.0

0 M

IN

148.5

0 M

IN174.5

0M

AX

195.5

0 M

AX

199.0

0M

AX

213.5

0M

AX

DISC & WHEELCL

CA

LIP

ER

MT

GP

LA

NE

109.0

0M

IN115.5

0 M

IN179.0

0M

AX

185.0

0 M

AX

191.0

0M

AX

205.0

0M

AX

109.0

0M

IN115.5

0 M

IN

131.0

0M

IN157.0

0M

AX

179.0

0M

AX

185.0

0 M

AX

195.0

0M

AX

106.35 MAX96.50 MAX88.50 MAX83.00 MAX


91.50 MAX80.50 MAX

38.35 MAX

12.50 MAX23.50 MAX

DISC & WHEELCL

CA

LIP

ER

MT

GP

LA

NE

135.0

INS

TA

LLA

TIO

N D

IME

NS

ION

3.0

0°

MIN

3.0

0°

MIN

3.00°

MIN

3.00°

MIN

MTGOFFSET

CALIPER

INSTALLED

PROFILE

ON A Ø380.00 X

28.00 DISC

CALIPER

INSTALLED

PROFILE

ON A Ø345.00 X

28.00 DISC

UP

RIG

HT

MO

UN

TIN

G‘U

’DIM

EN

SIO

N

TO

PO

FT

HE

PA

D/D

ISC

‘PL’D

IM’N

MTGOFFSET

117.5

0IN

STA

LLA

TIO

N D

IM’N

Ø15.80 MINIMUMSPOTFACE

CLEARANCE ONM12 FASTENER

12.00 MAX LENGTH OF THREADPROTRUSION PERMISSABLE ONHYDRAULIC FEED

40.0

0 M

OU

NT

ING

BO

SS

HE

IGH

T

130.0 (5.11”)

80.6

(3.1

7”)


jbennett

Note


http://www.apracing.com/drawings/CP8530-2~5S0_CD.pdf


29

www.apracing.com

29

CP55706 Piston, Suits Ø330mm Discs




Piston SizeØ27.0mmØ31.8mmØ38.1mm

Piston Area 50.1cm²Disc Diameter Ø330.0mmDisc Thickness-802/3/4/5S4 28.0mm-810/1/2/3S4 32.0mmWeight No Pads 2.4KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 152.0mmMounting offset-802/3/4/5S4 46.86mm-810/1/2/3S4 48.86mmMtg hole Ø 10.2mm‘PL’ Dimension 60.35mm


AKB Spring Kit - CP6518-4LBSSL

Wear Plates x 4 CP5555-174Pad Retainer BoltRetainer Part No.-802/3/4/5S4 CP5200-124-810/1/2/3S4 CP5555-157Retainer Bolt Part No.-802/3/4/5S4 CP3796-121-810/1/2/3S4 CP3596-112Bleed Screw CP3720-173Fluid Pipes-802/3/4/5S4 CP5555-56-810/1/2/3S4 CP5555-71


Disc Ø 330 x 28.

330 x 32

W1 71.60 73.6W2 46.75 46.75W3 38.0 40.0W4 77.0 79.0

W1 MAX

W2 MAX

REF. DISC WIDTH

W3 MAX

187.5

0M

AX

166.5

0M

AX

108.0

0M

IN

105.0

0M

IN

R4.00

CALIPER RADIAL PROFILE ASFITTED ON A Ø330.00 DISC

R165.00 REF MAX DISC

UP

RIG

HT

DIM

EN

SIO

N('

U'D

IM'N

)

267.00 MAX

OFFSET

W4

MA

X

152.00 MTG HOLE CENTRESØ10.20


FEATURES◘ Radial mount, 152 x 46.8mm ctrs. ◘ To suit Ø330mm x 28 / 32mm disc.◘ Cast Aluminium alloy body.◘ Aluminium alloy pistons with dirt seals fi tted.◘ Advanced Red or Black anti-corrosion paint fi nish.◘ Steel wear plates.◘ Pad anti-rattle clip fi tted.◘ Interchangeable with CP5200 caliper family.

PART NUMBERS◘ For Black Calipers- Suits Ø330 x 28mm disc. CP5570-802S4 RHT /-803S4 LHT /-804S4 RHL /-805S4 LHL- Suits Ø330 x 32mm disc. CP5570-810S4 RHT /-811S4 LHT /-812S4 RHL /-813S4 LHL



BRAKE CALIPERS - Performance Road - 6 Piston


CP8310, CP8316 & CP8317 6 Piston, Heavy Duty Calipers

TECHNICAL SPECIFICATIONPiston Sizes See Table

Below.Disc Diameter Ø410.0mmDisc Thickness 35.6mmWeight No Pads 6.1KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 210.0mmMtg offset 52.0mmMtg hole Ø 14.2mm‘PL’ Dimension 92.5mm

SPARE PARTSPistonsØ27.0mm CP7040-118Ø31.8mm CP6609-106Ø36.0mm CP6609-107Ø38.1mm CP6200-104Ø41.3mm CP6200-105Seal Repair KitCP8310 CP4525-CEJCP8316 CP4525-HJKCP8317 CP4525-EHJPad Retainer Tubes.Retainer Part No. CP8310-110Retainer Bolt. CP2889-107Wear PlatesCP8310-114 x 2 CP8310-115 x 2Bleed Screw CP3880-1Fluid Pipe CP8310-10



175.35 (6.90”)

705.50EFFECTIVEPAD

DEPTH

OMAØ410.00DISC

75.50(2.97”)

TYPICAL APPLICATIONS◘ SUV. ◘ Heavy Duty Road.◘ 4 x 4. ◘ Armoured Vehicles.

FEATURES◘ Radial mount, 210 x 52mm ctrs.◘ Suits Ø410 x 35.6mm disc.◘ Large pad area.◘ Suitable for higher line pressures.◘ 3 different bore variants available, see table below.◘ Cast Aluminium alloy body.◘ Aluminium alloy pistons.◘ Boot type dirt seals fi tted.◘ Advanced Black or Red paint fi nish, protects against corrosion.◘ Steel wear plates◘ Pad anti-rattle clip fi tted.


PART NUMBERS & PISTON INFORMATIONPart No. Piston Sizes (mm) Piston AreaCP8310-2/-3/-4/-5S0BK Ø27 / Ø31.8 / Ø38.1 50.4cm²CP8316-2/-3/-4/-5S0R2 Ø36 / Ø38.1 / Ø41.3 70.0cm²CP8317-2/-3/-4/-5S0BK Ø31.8 / Ø36 / Ø38.1 59.0cm²


jbennett

Note



http://www.apracing.com/drawings/CP5570.pdf

30

+44 (0)24 7663 9595

30

BRAKE CALIPERS - Performance Road & Armoured - 6 Piston

CP8520, CP8521 & CP85226 Piston, World Radi-CAL™ Calipers


INSTALLATION DRAWING FOR CP8520-2/3/4/5

TECHNICAL SPECIFICATIONDisc Dia. Max. 410.0mmDisc Dia. Min. 380.0mmDisc Thickness 36.0mmWeight No Pads 4.65KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 195.0mmMounting offset 49.50Mtg hole Ø 12.1mm‘PL’ Dimension 55.0mm

SPARE PARTSØ27.0 - Piston CP7555-106Ø31.8 - Piston CP8336-116Ø36.0 - Piston CP8520-107Ø38.1 - Piston CP8335-110Ø41.3 - Piston CP8335-111Seal Repair Kits

CP8520-2/3/4/8 CP4527-EHKCP8521-2/3/4/5 CP4527-EEKCP8522-2/3/4/5 CP4527-CEJPad Retainer PinRetainer P/No. CP8335-116H Piece CP8520-106Bleed Screw Kit CP3880-1Fluid Pipes

CP8520-2 & -4CP8521-2 & -4CP8522-2 & -4

CP8520-10

CP8520-3 & -5CP8521-3 & -5CP8522-3 & -5

CP8520-11

TYPICAL APPLICATIONS◘ Road Front or Rear.◘ Factory Big Brake kit Front or Rear.

FEATURES◘ Radial mount, 195mm ctrs.◘ Benefi ts from a radical asymmet-ric design concept.◘ Suits Ø410mm x 36mm disc.◘ Forged Aluminium alloy body.◘ Aluminium alloy pistons.◘ Boot type dirt seals fi tted.◘ Advanced Red or Black anti-corrosion paint fi nish◘ Steel wear plates.◘ Pad anti-rattle clip fi tted.


PART NUMBERS & PISTON INFORMATIONPart No. Piston Sizes (mm) Piston AreaCP8520-2/-3/-4/-5S0BK or R2 Ø31.8 / Ø36.0 / Ø41.3 62.5cm²CP8521-2/-3/-4/-5S0BK or R2 Ø31.8 / Ø31.8 / Ø41.3 58.6cm²CP8522-2/-3/-4/-5S0BK or R2 Ø27.0 / Ø31.8 / Ø38.1 50.1cm²

1 ( ”)75.5 6.901 ( ”)75.5 6.90

68

.52

.69

(”)

68

.52

.69

(”)

73

.52

.89

(”)

73

.52

.89

(”)

R205.00 REF MAXIMUM DISC

362.00 MAX

116.5

0M

IN

12

3.5

0 M

IN191.5

0M

AX

20

0.5

0 M

AX

21

4.0

0 M

AX

22

0.5

0 M

AX

116.5

0M

IN

12

3.5

0 M

IN1

38

.00

MIN

163.5

0M

AX

19

1.5

0 M

AX

20

2.5

0 M

AX

21

4.0

0 M

AX

102.50 MAX107.00 MAX118.00 MAX

125.85 MAX

98.50 MAX109.50 MAX

12.00 MAX26.85 MAX

1.00 MAX


DISC & WHEELCL

TO

PO

FP

AD

/DIS

C‘P

L’D

IM’N

UP

RIG

HT

MO

UN

TIN

G‘U

’DIM

EN

SIO

N

195.00 MOUNTING HOLE CENTRES‘D’ DIMENSION

CLEARANCE ONM12 FASTENER

Ø18.50 MINIMUMSPOTFACE

50

.00

MT

GB

OS

S H

EIG

HT

49

.50

OF

FS

ET

‘C’D

IM’N

10.00 MAX LENGTH OFTHREAD PROTRUSIONPERMISSIBLE ONHYDRAULIC FITTING

3.00

°M

IN

3.00°

MIN

CA

LIP

ER

MT

G P

LA

NE

49.50MTG

OFFSET

12

0.0

0IN

STA

LL

AT

ION

DIM

’N


12.00 MAX26.85 MAX

131.0

0M

IN

13

8.0

0 M

IN1

53

.00

MIN

178.5

0M

AX

20

5.5

0 M

AX

21

7.5

0 M

AX

22

8.0

0 M

AX

22

8.0

0 M

AX

211

.50

MA

X2

05

.50

MA

X138.0

0M

IN

102.50 MAX107.00 MAX116.00 MAX125.85 MAX

111.00 MAX100.00 MAX

131.0

0M

IN

1.00 MAX

231.0

0M

AX

DISC & WHEELCL

3.00

°M

IN

3.00°

MIN

49.50MTG

OFFSET

CA

LIP

ER

MT

G P

LA

NE

13

5.0

0IN

STA

LLT

ION

DIM

’N

CALIPER

INSTALLED

PROFILE

ON Ø410 X

36.00 DISC

CALIPER

INSTALLED

PROFILE

ON Ø380 X

36.00 DISC


CP90406 Piston, Two Piece Forged Body



Piston Area 50.1cm²Disc Diameter Ø362.0mmDisc ThicknessMax 32.0mmMin 30.0mmWeight No Pads 3.7KgHydraulic Thread M10x1.0Mounting Type RadialMtg centres 152.0mmMtg offset 53.2Mtg hole Ø 12.1mm‘PL’ Dimension 68.8mm

SPARE PARTSØ27.0 - Piston CP9040-109Ø31.8 - Piston CP6696-124Ø38.1 - Piston CP6695-124Seal Repair Kit CP4527-CEJPad Retainer TubesRetainer Part No. CP5555-157Pad retaining pins CP8335-116Bleed Screw CP3880-1Fluid Pipe CP9040-10Anti-Rattle Clip CP9040-108



TYPICAL APPLICATIONS◘ High Performance Road.◘ Factory Big Kit Caliper.

FEATURES◘ Radial mount, 152 x 53.2mm ctrs.◘ Suits Ø362mm x 32mm iron disc.◘ Two piece forged Aluminium alloy body.◘ Aluminium alloy pistons.◘ Boot type dirt seals fi tted.◘ Advanced gloss Black or Red anti-corrosion paint fi nish.◘ Steel wear plates.◘ Pad anti-rattle clip fi tted.

PART NUMBERS◘ Black calipers- CP9040-2S0BG RHT.- CP9040-3S0BG LHT.- CP9040-4S0BG RHL.- CP9040-5S0BG LHL.

◘ For Red Calipers- add ‘R2’ to end of part number e.g CP9040-2S0R2


291.00 MAX.

TOP

OF P

AD

/DIS

C‘P

L’D

IMN

UP

RIG

HT

MTG

‘U’

DIM

NR181.00REF. M

AXDISC

207.5

0 M

AX

168.0

9 M

AX

161.3

6 M

AX

138.8

0 M

IN

136.1

8 M

IN

124.5

0 M

IN

CALIPER MOUNTINGPLANE

CALIPER INSTALLED PROFILEON Ø362.00 X 32.00 DISC

DISC & WHEEL CL (112.2

0 IN

STA

LLA

TIO

ND

IMN

)

16.87MAX

0.30MIN

17.30MIN

53.20MTG OFFSET

DIS

C CL

89.10 MAX106.50 MAX

123.54 MAX

3.0

0°

MA

X

200.8

0 M

AX

179.8

7 M

AX

167.4

0 M

AX

137.1

0 M

IN125.0

4 M

IN120.5

0 M

IN

113.5

0 M

IN

R2.50MIN

R3.50MIN

2.00

° M

IN 1.12 MAX

53.23 MAX

130.50 MAX

123.33 MAX

111.60 MAX

100.70 MAX

35.10MAX

23.70MAX

MOUNTING HOLE CENTRES 152.00

11.00 MAX LENGTH OF THREADPROTRUSION PERMISSIBLE ONHYDRAULIC FITTING.

OFFSET

53

.2

CLEARANCE ONM12 FASTNER

Ø18.50 MINSPOTFACE


jbennett

Note


http://www.apracing.com/drawings/CP8520-2~5S0_CD.pdf


31

www.apracing.com

31

BRAKE CALIPERS - Technical Information & Replacement Caliper Seals

BASIC DIMENSIONS.The drawing below offers a brief explanation of basic AP Racing Drawing dimensions.

Dim’n Descriptions

PL

Top of the pad material to mounting hole boss face, (hole centre-line on lug type calipers).

C

Offset - Disc centre line to centre of mounting hole (mounting face on lug type calipers)

D Mounting hole centres.

H Mounting hole diameters.

E Disc width.

U

Wheel centre to caliper mounting hole boss. (disc diameter / 2 - ‘Pl’ dimension).

Spring Load.

Piston ØF. Up to 34mm.

Free Length & Wire Ø. (mm)

Piston ØG. 34.9mm & above.

Free Length & Wire Ø. (mm)

4lbs CP2632-113 38.43 & 0.91 CP2667-105 39.88 & 1.227lbs CP4100-121 39.88 & 1.02 CP2667-113 39.88 & 1.299lbs CP3432-134 49.02 & 1.02 CP2667-125 70.36 & 1.2912lbs CP2632-129 58.50 & 1.29 CP2667-154 70.36 & 1.49

Anti-Knockback Spring Kits.

Caliper Type Part Number Contents

4 Piston

CP6518-4LBSS 4 x CP2632-113CP6518-4LBLL 4 x CP2667-105CP6518-7LBLL 4 x CP2667-113CP6518-9LBLL 4 x CP2667-125

6 PistonCP6518-4LBSSL 4 x CP2632-113 & 2 x CP2667-105CP6518-7LBSSL 4 x CP4100-121 & 2 x CP2667-113CP6518-9LBSSL 4 x CP3432-134 & 2 x CP2667-125

ANTI-KNOCKBACK SPRINGS.A range of anti-knockback springs are available for use with AP Racing calipers. The spring is located behind the piston in the caliper bore and is designed to counteract pad knock off. The springs are available in four loads indicated in lbs/f (force) with 2 sizes dependant upon piston diameter.

RECOMMENDED TIGHTENING TORQUES. AP Racing recommended tightening torques:◘ M6 & ¼ UNF Pad Retaining Bolts: - 18Nm◘ M4 Pad abutment cap head screws: (use loctite 242) - 3.5Nm◘ M4 wear sensor clamp screw: ( use loctite 243) - 3.0Nm◘ Cross pipe tube nuts: (Use loctite 648 inside tube nuts, with 7649 activator) - 24Nm◘ 3/8”UNF Adaptors and Banjo bolts:- With one copper gasket: - 13Nm + 45°- With two copper gaskets: - 13Nm + 90°Resulting maximum torque must not exceed: - 30Nm◘ CP6300 Dry Break Connector into caliper: - 13Nm(Loctite 270 can be used)◘ Dry Break connector cap: - 4Nm◘ Bleed Screws: - 17Nm

DISC PATHWAY CLEARANCE.Disc diameter clearance should be 2.5mm nominal from disc outside diameter to caliper pathway. The clearance can be reduced to 1.8mm minimum for smaller diameter discs (Ø280mm and lower). It is recommended that the tighter clearance is only used with radial mounted calipers where some degree of adjustment by using shims can be achieved if required.

REPLACEMENT CALIPER SEALSBrake calipers are a safety critical item and AP Racing recommend that calipers are reconditioned and piston seals inspected regularly to maintain optimum perfor-mance. Where calipers have been subjected to high temperatures or have been used in adverse conditions e.g. Off Road / Rallying, the calipers should be recon-ditioned and seals replaced more frequently to ensure that safety and performance levels are maintained. When cleaning calipers use warm soapy water or an alcohol based cleaning fl uid e.g. Methylated Spirits.

DO NOT USE PETROL, GASOLINE OR MINERAL OIL CLEANER /LUBRICATE as this will damage the seals. Replacement seal kits are available for all AP Racing brake calipers. Depending on the seal type be-ing replaced the following recommended procedures should be followed. To fi nd correct seal kit see pages 33 to 39.

CP4509 (SEAL ON PISTON)1) Soak new seals in brake fl uid for minimum of 30 minutes. 2) Clean brake caliper with warm soapy water and dry off.3) With the pads removed insert a brake disc or block into the centre of the caliper. Using either hydraulic pressure or compressed air carefully extend all pistons against the disc or block. Remove block and remove pistons. Keep all body parts away from escaping air and caliper pistons. CAUTION: Your caliper is fi tted with a Glyd Ring just inside the opening of each caliper bore. This ring should be examined and replaced if caliper has been subjected to high temperatures or used in adverse conditions e.g. off Road / Rallying or not changed for a year.4) Carefully remove old seals from piston with a narrow blunt edged tool. 5) Ensure that caliper bores, seal grooves and pistons are clean and free from debris and moisture. Use only Alcohol based cleaning fl uid, not Mineral oil. 6) Carefully fi t replacement seal into groove on piston ensuring that it seats correctly in the groove. Check seals are free from damage and correctly seated in groove not twisted or kinked. 7) Carefully engage piston into caliper bore and using a suitable rigid fl at bar to apply even pressure, push pistons fully into body. N.B. Excessive force should not be necessary. If piston does not slide smoothly into bore remove & check seal has been fi tted correctly.

CP4518 & CP8518 (SEAL IN BORE)1) Soak new seals in brake fl uid for minimum of 30 minutes. 2) Clean brake caliper with warm soapy water and dry off. 3) With the pads removed insert a brake disc or block into the centre of the caliper. Using either hydraulic pressure or compressed air carefully extend all pistons against the disc or block. Remove block and remove pistons. Keep all body parts away from escaping air and caliper pistons. 4) Carefully remove old seals with a narrow blunt edged tool. 5) Ensure that caliper bores, seal grooves and pistons are clean and free from debris and moisture. Use only Alcohol based cleaning fl uid, not Mineral oil. 6) Carefully fi t replacement seal into groove in caliper body ensuring that it seats correctly in the groove. Check seals are free from damage and correctly seated in groove not twisted or kinked. 7) Carefully engage piston into caliper bore and using a suitable rigid fl at bar to apply even pressure, push pistons fully into body. N.B. Excessive force should not be necessary. If piston does not slide smoothly into bore remove & check seal has been fi tted correctly.

CP4519 (SEAL IN BORE WITH DIRT SEAL)1) Soak new pressure seals in brake fl uid for minimum of 30 minutes. Do not soak dirt seals (double lip).2) Clean brake caliper with warm soapy water and dry off. 3) With the pads removed insert a brake disc or block into the centre of the caliper. Using either hydraulic pressure or compressed air carefully extend all pistons against the disc or block. Remove block and remove pistons. Keep all body parts away from escaping air and caliper pistons. 4) Carefully remove both old seals with a narrow blunt edged tool.

32

+44 (0)24 7663 9595

32

CP4525 & CP4527 (BOOT TYPE WITH DIRT SEAL) Removal: Before removal procedure begins the brake caliper should be thoroughly cleaned using warm soapy water only. Ensure that all hydraulic ports are sealed before cleaning and dry caliper thoroughly before work begins. Do not use chemical cleaners of any kind or petrol/gasoline or miner-al oil based, as these will cause permanent damage to the new seals.1) Use a reaction block selected to fi ll the full width of the caliper pathway as shown in fi g.1. This block must span the length of the caliper opening and be well supported between the brake pad abutments at either end of the caliper. 2) Loosely insert a hydraulic fi tting (M10x1.0) into the caliper feed port as shown in fi g.2 (a spare Bleed Screw loosely fi tted will suffi ce). Do not tighten to form a seal.3) Press a hand held air gun against the fi tting as shown in fi g.3 and allow a short, high pressure burst of air to enter the caliper (a perfect seal between the air gun and fi tting is neither necessary or advisable). Keep all body parts away from escaping air and caliper pistons. 4) A single burst of air should be suffi cient to extend all pistons at once as shown in fi g.4. If one or more pistons remain jammed in the caliper body after repeating this step then the caliper may need to be returned to AP Racing for assessment. Please contact AP Racing Technical for assistance. 5) Remove reaction block. It is possible that the dirt seals may become de-tached from the caliper body at this point. If so the pistons can be carefully pulled from the caliper body with dirt seals attached. It is also possible that the dirt seal may become detached from the piston in which case the piston should be pulled through the dirt seal to remove. Where dirt seal remains attached to both piston and caliper body a small blunt instrument (such as a rounded off screwdriver, see fi g.10) should be used to carefully release the dirt seal from the piston, as shown in fi g.5. 6) Fig.6 shows pistons removed with dirt seals remaining attached to caliper body.7) The dirt seal can now be removed by carefully inserting a narrow, blunt blade (such as a medium sized screwdriver) through the seal opening and between the outer ring of the seal and the back wall of the dirt seal recess as shown in fi g.7. By gently turning the screwdriver the seal should work free. Only very light force is required to perform this operation. Never use excessive force as damage to caliper body may result. 8) Once dirt seal is removed the pressure seal will be exposed, located in the groove in the caliper body as shown in fi g.8. 9) Using the small blunt instrument from step 5 (see fi g.10), carefully remove the pressure seal from the caliper body as shown in fi g.9. 10) All dirt and pressure seals should be removed from the caliper by fol-lowing the above procedure. Before new seals are fi tted all pistons and the caliper body should be inspected for damage. If damage of any kind is present on either the caliper bores or piston outer diameters the caliper should be considered unfi t for use and either replaced of returned to AP Racing for assessment. If in doubt regarding any aspect of caliper safety please contact AP Racing Technical for assistance.Refi tting:11) Before re-assembly ensure that all parts are perfectly clean and free from debris or moisture. Replacement pressure seals should be soaked in AP Racing brake fl uid for 30 minutes prior to fi tment. Do not remove excess brake fl uid as the excess will aid fi tment of pistons. Do not soak dirt seals. 12) Carefully fi t pressure seal into groove in caliper body ensuring that it seats correctly in the groove. Seal should be free from damage and not be twisted or kinked. Pre-assemble dirt seal on piston (seal locates in groove on piston end). Carefully slide piston into caliper bore (pressure seal must already have been installed as shown in fi g.11. Only light pressure applied by hand is required. If piston does not slide easily into place remove and inspect parts. If diffi culty is experienced when installing pistons please contact AP Racing Technical for assistance.13) The dirt seals can now be pressed into caliper body. Carefully locate seal in caliper body using fi nger pressure only. Then select a suitable rigid, fl at bar or similar as shown in fi g.12. and position to cover dirt seal.

BRAKE CALIPERS - Replacement Caliper Seals

fig 1. fig 2. fig 3.

fig 4.

ORDERING To determine the correct seal kit proceed as follows:- 1) If you know the part number of your caliper then determine the correct part number of the kit required by referring to the table on pages 34 to 39.2) If you do not know the part number of your caliper then proceed as follows:-a) measure the nominal piston diameters. b) determine the type by comparison with the drawings on pages 31/32. c) Look at the column (caliper bore in mm) identify your sizes. The relevant kit number can be found on the right. d) When ordering please quote the seal kit part no, given on the right hand side from the relevant table, then contact your nearest AP Racing stockist for availability.3) Each kit contains seals to repair one caliper:- a) One letter after Kit Nos = 2 seals, e.g. -Jb) Two letters after Kit Nos= 4 seals, e.g. -JJc) Three letters after Kit Nos = 6 seals, e.g. -CEJd) Four letters after kit Nos = 8 seals, e.g. -AEAENB. Kits are priced more competitively compared to purchasing individual seals. NB. With CP4519, CP4525 and CP4527 seal kits, the appropriate number of dirt seals and or boot seals are also included.NB. Kits contain one caliper set of seals e.g. 2, 4, 6, or 8.

14) Apply slow and even pressure to dirt seal using bar as shown in fi g.13. Care must be taken to ensure that dirt seal is inserted square to the caliper body. 15) On correct installation the dirt seal should sit fl ush with the caliper body as shown in fi g.14. Repeat steps 12 to 15 to fi t all remaining pistons and seals. Once calipers are refi tted to vehicle a pressure test should be carried out to check for leaks. With the engine running press the brake pedal and hold at a constant load for 60 seconds. No ‘sinking’ of the brake pedal should occur. If the pedal does ‘sink’ (travel further when under con-stant/steady load) it should be considered that a leak in the brake system is present. If a leak is suspected check all hydraulic joints and inspect re-conditioned calipers. If cause of leak cannot be identifi ed contact AP Racing Technical for assistance before vehicle is used. The repair kit may also contain 2 off small ‘O’Rings for replacement of Bleed Screw seals where fi tted. There may also be replacement Bleed Screw dust caps included. Where included these parts should be fi tted to the brake caliper. Replacement seal kit details for all piston confi gurations used in AP Racing brake calipers “seal in bore”, “seal on piston” and “seal in bore with dirt seals” are given in the table on page 33.

CP4519 (SEAL IN BORE WITH DIRT SEAL) CON’T.5) Ensure that caliper bores, seal grooves and pistons are clean and free from debris and moisture. Use only Alcohol based cleaning fl uid, not Mineral oil.6) Carefully fi t both replacement seals into groove in caliper body ensuring that they seat correctly in the grooves. Check seals are free from damage and correctly seated in grooves not twisted or kinked. 7) Carefully engage piston into caliper bore and using a suitable rigid fl at bar to apply even pressure, push pistons fully into body. N.B. Excessive force should not be necessary. If piston does not slide smoothly into bore remove & check seals has been fi tted correctly.

fig 5. fig 6.

fig 7. fig 8. fig 9.

fig 10. fig 11. fig 12.

fig 13. fig 14.

33

www.apracing.com

33

BRAKE CALIPERS - Replacement Caliper Seals

CP4518 & CP8518- Seal in bore Replacement seals and kit part numbers for Race Calipers

Caliper Bore CP4518 - Standard high temperature seals.Individual Part Numbers

CP4518Seal Kits

CP8518 - Very high Temperature seals.Individual Part numbers

CP8518 Seal Kits Caliper

25.4 CP4900-172 CP4518-A

2 Piston

31.8 CP4900-168 CP4518-E36.0 CP4900-165 CP4518-H38.1 CP4900-164 CP4518-J41.3 CP4900-163 CP4518-K44.5 CP4900-162 CP4518-L50.8 CP4900-160 CP4518-N25.4 CP4900-172 CP4518-AA

4 Piston

25.4 / 31.8 CP4900-172 / CP4900-168 CP4518-AE27.0 / 28.6 CP4900-170 / CP4900-169 CP4518-CD27.0 / 31.8 CP4900-170 / CP4900-168 CP4518-CE CP4900-290 / CP4900-288 CP8518-CE27.0 / 34.0 CP4900-170 / CP4900-167 CP4518-CF27.0 / 34.9 CP4900-170 / CP4900-166 CP4518-CG28.6 CP4900-169 CP4518-DD28.6 / 31.8 CP4900-169 / CP4900-168 CP4518-DE28.6 / 34.9 CP4900-169 / CP4900-166 CP4518-DG CP4900-289 / CP4900-286 CP8518-DG28.6 / 36.0 CP4900-169 / CP4900-165 CP4518-DH31.8 CP4900-168 CP4518-EE31.8 / 34.9 CP4900-168 / CP4900-166 CP4518-EG31.8 / 36.0 CP4900-168 / CP4900-165 CP4518-EH34.9 CP4900-166 CP4518-GG34.9 / 41.3 CP4900-166 / CP4900-163 CP4518-GK CP4900-286 / CP4900-283 CP8518-GK36.0 CP4900-165 CP4518-HH36.0 / 44.5 CP4900-165 / CP4900-162 CP4518-HL36.0 / 38.1 CP4900-165 / CP4900-164 CP4518-HJ38.1 CP4900-164 CP4518-JJ38.1 / 41.3 CP4900-164 / CP4900-163 CP4518-JK CP4900-284 / CP4900-283 CP8518-JK38.1 / 44.5 CP4900-164 / CP4900-162 CP4518-JL41.3 CP4900-163 CP4518-KK41.3 / 44.5 CP4900-163 / CP4900-162 CP4518-KL44.5 CP4900-162 CP4518-LL44.5 / 47.6 CP4900-162 / CP4900-161 CP4518-LM25.4 CP4900-172 CP4518-AAA

6 Piston

25.4 / 27.0 / 28.6 CP4900-172 / CP4900-170 / CP4900-169 CP4518-ACD CP4900-292 / CP4900-290 / CP4900-289 CP8518-ACD25.4 / 27.0 / 31.8 CP4900-172 / CP4900-170 / CP4900-168 CP4518-ACE25.4 / 28.6 CP4900-172 / CP4900-169 CP4518-ADD26.0 / 27.0 / 31.8 CP4900-171 / CP4900-170 / CP4900-168 CP4518-BCE CP4900-291 / CP4900-290 / CP4900-288 CP8518-BCE26.0 / 31.8 / 36.0 CP4900-171 / CP4900-168 / CP4900-165 CP4518-BEH CP4900-291 / CP4900-288 / CP4900-285 CP8518-BEH27.0 / 31.8 / 38.1 CP4900-170 / CP4900-168 / CP4900-164 CP4518-CEJ CP4900-290 / CP4900-288 / CP4900-284 CP8518-CEJ28.6 / 31.8 / 41.3 CP4900-169 / CP4900-168 / CP4900-163 CP4518-DEK31.8 CP4900-168 CP4518-EEE31.8 / 34.0 / 41.3 CP4900-168 / CP4900-167 / CP4900-163 CP4518-EFK CP4900-288 / CP4900-287 / CP4900-283 CP8518-EFK31.8 / 34.9 / 44.5 CP4900-168 / CP4900-166 / CP4900-162 CP4518-EGL25.4 CP4900-172 / CP4900-168 CP4518-AEAE 8 PistonCP4519 - Seal In Bore Replacement Seals and Dirt Seal Part Numbers.41.3 CP4900-163 (112854) / 113094 Retainer CP4508-K

2 Piston

44.5 CP4900-162 (119990) / 3662-298 Retainer CP4508-L31.8 CP4949-110 (CP3477-105) CP4519-E36.0 CP4949-113 (3853-742) CP4519-H38.1 CP4949-114 (3865-742) CP4519-J41.3 CP4949-115 (112854) CP4519-K44.5 CP4949-116 (119990) CP4519-L27.0 CP4949-108 (CP4098-106) CP4519-CC

4 Piston

27.0 / 31.8 CP4949-108 (CP4098-106) / CP4949-110 (CP3477-105) CP4519-CE28.6 / 36.0 CP2414-118 (4477-108) / CP4949-113 (CP4477-108) CP4519-DH31.8 CP4949-110 (CP3477-105) CP4519-EE36.0 / 38.1 CP4949-113 (3853-742) / CP4949-114 (3865-742) CP4519-HJ38.1 CP4949-114 (3865-742) CP4519-JJ38.1 / 41.3 CP4949-114 (3865-742) / CP4949-115 (112854) CP4519-JK41.3 / 44.5 CP4949-115 (112854) / CP4949-116 (119990) CP4519-KL25.4 / 28.6 CP4900-172 (CP4477-109) / CP4900-169 (CP4477-108) CP4519-ADD 6 Piston27.0 / 31.8 / 38.1 CP4949-108 (CP4098-106) / CP4949-110 (CP3477-105) / CP4949-114 (CP3477-116) CP4519-CEJCP4509 - Seal on Piston Replacement Seals and Seal Kit Part Numbers.28.6 / 34.9 CP3724-138 CP3724-135 CP4509-DG

4 Piston

31.8 CP3724-137 CP4509-EE31.8 / 36.0 CP3724-137 / CP3724-134 CP4509-EH31.8 / 38.1 CP3724-137 / CP3724-133 CP4509-EJ34.9 / 41.3 CP3724-135 / CP3724-132 CP4509-GK38.1 CP3724-133 CP4509-JJ38.1 / 41.3 CP3724-133 / CP3724-132 CP4509-JK38.1 / 44.5 CP3724-133 / CP3724-131 CP4509-JL41.3 / 44.5 CP3724-132 / CP3724-131 CP4509-KL27.0 / 31.8 / 38.1 CP3724-139 / CP3724-137 / CP3724-133 CP4509-CEJ 6 Piston28.6 / 31.8 / 41.3 CP3724-138 / CP3724-137 / CP3724-132 CP4509-DEKCP4525 & CP4527- Seal in Bore - Boot type Seal - Replacement Seal and Kit Part Numbers

Caliper Bore CP4525 - Individual Seal & Boot Part Numbers

CP4525Seal Kit

CP4527 - Individual Seal & Boot Part Numbers

CP4527Seal Kit

27.0 CP4949-108 (CP7040-106) CP4525-CC CP4949-108 (CP8420-110) CP4527-CC

4 Piston

28.6 CP5107-109 (CP7040-106) CP4525-DD28.6 / 31.8 CP4949-109 (CP6691-101) / CP4949-110 (CP6016-107) CP4527-DE31.8 CP4949-110 (CP6200-112) CP4525-EE38.1 CP4949-114 (CP6200-114) CP4525-JJ38.1 / 41.3 CP4949-114 (CP6200-114) / CP4949-115 (CP6200-115) CP4525-JK CP4949-114 (CP7516-108) / CP4949-115 (CP7516-109) CP4527-JK

27.0 / 31.8 / 38.1 CP4949-108 (CP7040-106) / CP4949-110 (CP6200-112) / CP4949-114 (CP6200-114) CP4525-CEJ CP4949-108 (CP8420-110) / CP4949-110 (CP6016-107)

/ CP4949-114 (CP7516-108) CP4527-CEJ

6 Piston

31.8 / 31.8 / 41.3 CP4949-110 (CP6016-107) / CP4949-115 (CP7516-109) CP4527-EEK

31.8 / 36.0 / 38.1 CP4949-110 (CP6200-112) / CP4949-113 /CP4949-114 (CP6200-114 x 4) CP4525-EHJ

36.0 / 38.1 / 41.3 CP4949-113 / CP4949-114 (CP6200-114 x 4) / CP4949-115 (CP6200-115) CP4525-HJK

31.8 / 36.0 / 41.3 CP4949-110 (CP6016-107) / CP4949-113 (CP6696-109)/ CP4949-115 (CP7516-109) CP4527-EHK

REPLACEMENT CALIPER SEAL TABLECaliper Bore identifi cation Letters and Size Reference mm (inch)

A = 25.4(1.00”) B = 26.0 C = 27.0

(1.06”)D = 28.6(1.125”)

E = 31.8(1.25”) F = 34.0 G = 34.9

(1.375”) H = 36.0 J = 38.1(1.50”)

K = 41.3(1.625”)

L = 44.5(1.75”)

M = 47.6(1.875”)

N = 50.8(2.00”)

34

+44 (0)24 7663 9595

Caliper Assemblies Seal Repair Kit Part No.

Bleed Screw or Kit Part No.

Piston 1 - Part No.

Piston 2 - Part No.

Piston 3 - Part No.

Pad Retainer Part No.

Fluid Pipe Part No. Wear Plates Part No x Quantity

CP2195-1002/1003E0 CP4518-K CP3720-182 CP2195-9 CP2055CP2270-144/145S4QR CP4518-KK CP3720-182 CP2270-92CP2271-182/183S4QR CP4518-JJ CP3720-182 CP2260-66CP2279-400S4BP CP4518-LL CP3720-182 CP2279-6CP2361-96/97S4QR CP4518-JJ CP3720-182 CP2260-66CP2382-12/13E4 CP4518-N CP3720-182 CP2383-52CP2383-12E0 CP4518-N CP3720-182 CP2383-52CP2383-12/13E4 CP4518-N CP3720-182 CP2383-52CP2485-2/3S0L CP4508-L CP3720-182 CP2195-157 CP2696-160CP2485-8/9S0L CP4508-L CP3720-182 CP2195-157 CP2696-160CP2505-34/35S0L CP4508-K CP3720-182 CP2195-14 CP2696-160CP2505-3S0L CP4508-K CP3720-182 CP2195-14 CP2696-160CP2561-3S4 CP4518-J CP3720-173 CP2260-66 CP2554-106CP2576-12E0 CP4518-K CP3720-182 CP2576-105CP2576-3E0 CP4518-K CP3720-182 CP2576-105CP2577-12E0 CP4518-L CP3720-182 CP2577-102CP2577-14E0 CP4518-L CP3720-182 CP2577-102CP2577-15E0 CP4518-L CP3720-182 CP2577-102CP2577-3E0 CP4518-L CP3720-182 CP2577-102CP2696-38E0 CP4518-K CP3720-182 CP2195-9 CP2055CP3176-2E0 CP4518-J CP3720-182 CP3176-102CP3177-2E0 CP4518-H CP3720-182 CP3177-102CP3177-4E0 CP4518-H CP3720-182 CP3177-102CP3178-2E0 CP4518-E CP3720-182 CP3178-102CP3228-10/11S4 CP4518-JJ CP3720-182 CP3228-103 CP3228-4CP3228-26/27S4 CP4518-JJ CP3720-182 CP3228-103 CP3228-4CP3228-28/29S4 CP4518-JJ CP3720-182 CP2361-4 CP3228-4CP3228-38/39S4 CP4518-JJ CP3720-182 CP3228-103 CP3228-4CP3228-44/45S4 CP4518-JJ CP3720-182 CP3228-103 CP3228-4CP3228-6/7S4 CP4518-JJ CP3720-182 CP2361-4 CP3228-4CP3307-1004/1005S0 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 x 4CP3307-1016/1017S0 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-248 CP3307-264 CP3307-222 x 4CP3307-1028/29S4 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 x 4CP3307-1034/1035S4 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 x 4CP3307-1038/1039S4 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 x 4CP3307-1046/47/48/49S0 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 x 4CP3307-1052/53/54/55S4 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 x 4CP3307-1058/1059S4 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 x 4CP3307-1064/65/66/67S0 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 x 4CP3307-14/15S4 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 x 4CP3307-262/263S0 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 x 4CP3307-58/59/60/61S4 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 x 4CP3307-64/65S4 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 x 4CP3307-68/69S0 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 x 4CP3307-72/73S0 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-248 CP3216-29 CP3307-222 x 4CP3307-74/75/76/77S4 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 x 4CP3307-84/85S0 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 x 4CP3307-92/93S4 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 x 4CP3307-96/97S4 CP4518-JK CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 x 4CP3344-1000/1/2/3S4 CP4518-JK CP3720-182 CP3228-103 CP3344-109 CP3344-122 CP3344-113 CP3567-109 x 4CP3344-12/13S4 CP4518-JK CP3720-182 CP3228-103 CP3344-109 CP3344-108 CP3344-110 CP3567-109 x 4CP3344-36/37S4 CP4518-JK CP3720-182 CP3228-103 CP3344-109 CP3344-122 CP3344-113 CP3567-109 x 4CP3344-48/49/50/51S4 CP4518-JK CP3720-182 CP3228-103 CP3344-109 CP3344-127 CP3344-140 CP3567-109 x 4CP3344-60/61S4 CP4518-JK CP3720-182 CP3228-103 CP3344-109 CP3344-161 CP3344-164 CP3567-109 x 4CP3345-10/11/12/13S4 CP4518-JK CP3720-182 CP3228-103 CP3344-109 CP3344-122 CP3344-113 CP3567-109 x 4CP3345-14/15/16/17S4 CP4518-JK CP3720-182 CP3228-103 CP3344-109 CP3345-117 CP3345-116 CP3567-109 x 4CP3345-2/3S4 CP4518-JK CP3720-182 CP3228-103 CP3344-109 CP3344-108 CP3344-110 CP3567-109 x 4CP3345-40/41S4 CP4518-JK CP3720-182 CP3228-103 CP3344-109 CP3344-122 CP3344-113 CP3567-109 x 4CP3345-4/5/6/7S4 CP4518-JK CP3720-182 CP3228-103 CP3344-109 CP3344-108 CP3344-110 CP3567-109 x 4CP3345-88/89/90/91S4 CP4518-JK CP3720-182 CP3228-103 CP3344-109 CP3344-122 CP3344-113 CP3567-109 x 4CP3345-94/95S4 CP4518-JK CP3720-182 CP3228-103 CP3344-109 CP3345-162 CP3345-96 CP3567-109 x 4CP3369-2/3E0 CP4518-DG 3486-229 CP3086-115 CP3369-114CP3395-1050/51/52/53S7 CP4519-HJ CP3720-182 CP3636-107 CP3394-109 CP3788-112 CP3395-1054 CP3846-101 x 4CP3395-2/3/4/5S4 CP4519-KL CP3720-182 CP3394-109 CP3394-110 CP3394-113 CP3394-111 CP3394-140 x 4CP3395-2/3/4/5S4M CP4518-KL CP3720-182 CP3395-110 CP3395-109 CP3394-113 CP3394-111 CP3394-140 x 4CP3395-82/83U9L CP4518-HJ CP4100-113 CP3463-106 CP3463-107 CP3395-145 CP3395-135 CP3394-118 x 2 / CP3394-140 x 2CP3434-1000/1/2/3S4 CP4519-HJ CP3720-182 CP3434-116 CP3434-117 CP4890-101 CP3434-15CP3470-38/39S7 CP4509-JK CP3720-182 CP3257-108 CP3257-109 CP4890-101 CP3434-14CP3470-42/43S7 CP4509-JK CP3720-182 CP3257-108 CP3257-109 CP4890-101 CP3434-14CP3552-14S0 CP4509-JK 3486-268 CP3552-132 3662-345CP3552-18/19S0 NOT AVAILABLE 3486-268 3278-203 3662-345CP3552-8/9S0 NOT AVAILABLE 3486-268 3278-203 3662-345CP3556-2/3S4 NOT AVAILABLE CP3720-182 CP3577-103 CP3344-122 CP3344-113 CP3567-109 x 4CP3567-16/17/18/19S4 CP4518-GK CP3720-182 CP3567-108 CP3344-109 CP3344-161 CP3344-164 CP3567-109 x 4CP3567-8/9S7 CP4518-GK CP3720-182 CP3567-108 CP3344-109 CP3345-117 CP3345-116 CP3567-109 x 4CP3577-6/7S4 CP4509-EE CP3720-182 CP3577-103 CP4069-108 CP3344-113 CP3567-109 x 4CP3620-12/13S4M CP4509-EE CP3720-173 CP4910-115 CP4890-101 CP3620-8 CP3720-106 x 4CP3620-2/3S0M CP4518-EE CP3720-173 CP3620-103 CP4890-101 CP3620-8 CP3720-106 x 4CP3620-2/3S4 CP4509-EE CP3720-173 CP3760-110 CP4890-101 CP3620-8 CP3720-106 x 4CP3620-2/3S7M CP4509-EE CP3720-173 CP3620-103 CP3434-118 CP3620-8 CP3720-106 x 4CP3676-4E0 CP4518-K CP3720-182 CP2576-105CP3677-4E0 CP4518-L CP3720-182 CP2577-102CP3696-6E0 CP4518-K CP3720-182 CP3696-105CP3697-2E0 CP4518-L 3486-229 CP3697-104CP3720-10/11S4 CP4518-L CP3720-173 CP3720-126 CP3720-125 CP4890-101 CP3720-35 CP3720-106 x 4CP3720-12/13/14/15S4 CP4509-JL CP3720-173 CP3720-126 CP3720-125 CP3440-118 CP3720-36 CP3720-106 x 4CP3720-16/17S0M CP4509-JL CP3720-173 CP3720-115 CP3720-114 CP4890-101 CP3720-34 CP3720-106 x 4CP3720-16/17S4 CP4509-JL CP3720-173 CP3720-126 CP3720-125 CP3434-118 CP3720-34 CP3720-106 x 4CP3720-16/17S4M CP4509-JL CP3720-173 CP3720-115 CP3720-114 CP3434-118 CP3720-34 CP3720-106 x 4CP3720-18/19S4M CP4509-JL CP3720-173 CP3720-115 CP3720-114 CP4890-101 CP3720-34 CP3720-106 x 4CP3720-30/31/32/33S4 CP4509-JL CP3720-173 CP3720-126 CP3720-125 CP3679-117 CP3720-38 CP3720-106 x 4CP3720-30/31S4M CP4509-JL CP3720-107 CP3720-115 CP3720-114 CP3679-117 CP3720-38 CP3720-106 x 4CP3720-42/43/44/45S4 CP4509-JL CP3720-173 CP3720-126 CP3720-125 CP4890-101 CP3720-34 CP3720-106 x 4CP3720-42/43/44/45S4M CP4509-JL CP3720-173 CP3720-115 CP3720-114 CP4890-101 CP3720-34 CP3720-106 x 4CP3720-76/77/78/79S4M CP4518-JL CP3720-173 CP4910-114 CP3720-177 CP4890-101 CP3720-34 CP3720-106 x 4CP3720-78/79S4 CP4518-JL CP3720-173 CP3344-192 CP5000-209 CP4890-101 CP3720-34 CP3720-106 x 4CP3720-84/85S4M CP4509-JL CP3720-173 CP3720-115 CP3720-114 CP4890-101 CP3720-34CP3720-88/89S4M CP4509-JL CP3720-173 CP3720-115 CP3720-114 CP4890-101 CP3720-106 x 4CP3720-8/9S4 CP4509-JL CP3720-173 CP3720-126 CP3720-125 CP4890-101 CP3720-35 CP3720-106 x 4CP3735-2/3S4 CP4509-EH CP3720-182 CP3577-103 CP3735-107 CP3344-122 CP3344-113CP3735-6/7S4 CP4509-EH CP3720-182 CP3577-103 CP3735-107 CP3344-122 CP3344-113CP3788-16/17/18/19S7 CP4518-JL CP3720-173 CP3636-107 CP3394-110 CP3795-101 CP3799-6 CP3799-110 x 1 & -111 x 1 / CP3846-101 x 2

REPLACEMENT PARTS.Replacement parts listing on pages 34 to 39 are for all brake caliper manufactured by AP Racing except. F1 and Customer specifi c calipers. These parts are available for sale individually, however some may be obsolete and are listed as a guide only. Please contact AP Racing for further information.IMPORTANT NOTE.Whilst every care has been taken to ensure the information contained in the tables on pages 34 to 39 in this publication is correct at the time of printing, the company however cannot accept any responsibility for any errors which may occur

BRAKE CALIPERS - Spare Parts

35

www.apracing.com



Piston 1 Part No.

Piston 2 Part No.

Piston 3Part No.


Fluid Pipe Part No. Wear Plates Part No x Qty.

CP3788-2/3/4/5S7 CP4518-JL CP3720-173 CP3636-107 CP3394-110 CP3799-109 CP3799-6 CP3799-111 x 1 / CP3846-101 x 2 / CP3799-110 x 1CP3788-6/7/8/9S4 CP4518-JL CP3720-173 CP3636-107 CP3394-110 CP3788-112 CP3788-10 CP3799-111 x 1 / CP3846-101 x 2 / CP3799-110 x 1CP3789-2/3/4/5S7 CP4518-DG CP3720-173 CP3789-106 CP3394-109 CP3799-109 CP3799-6 CP3799-111 x 1 / CP3846-101 x 2 / CP3799-110 x 1CP3789-6/7/8/9S4 CP4518-DG CP3720-173 CP3789-106 CP3394-109 CP3788-112 CP3788-10 CP3799-111 x 1 / CP3846-101 x 2 / CP3799-110 x 1CP3790-2/3/4/5S7 CP4518-HL CP3720-173 CP3394-110 CP3483-101 CP3799-109 CP3799-6 CP3799-111 x 1 / CP3846-101 x 2 / CP3799-110 x 1CP3790-6/7/8/9S4 CP4518-HL CP3720-173 CP3394-110 CP3483-101 CP3788-112 CP3788-10 CP3799-111 x 1 / CP3846-101 x 2 / CP3799-110 x 1CP3796-20/21/22/23S4 CP4509-CEJ CP3720-182 CP3760-111 CP3760-110 CP3720-126 CP3796-134 CP3796-136 CP3596-108 x 4CP3796-24/25/26/27S4 CP4509-CEJ CP3720-182 CP3760-111 CP3760-110 CP3720-126 CP3796-134 CP3796-138 CP3596-159 x 4CP3796-24/25/26/27S4M CP4509-CEJ CP3720-182 CP3596-130 CP3620-103 CP3720-115 CP3796-134 CP3796-138 CP3596-159 x 4CP3796-30/31/32/33S4 CP4509-CEJ CP3720-182 CP3760-111 CP3760-110 CP3720-126 CP3796-135 CP3796-137 CP3596-159 x 4CP3798-2/3/4/5S0M CP4518-CE CP3720-173 CP3798-107 CP4296-113 CP3798-106 CP3798-6 CP3799-111 x 1 / CP3846-101 x 2 / CP3799-110 x 1CP3799-2/3/4/5S0 CP4815-DG CP3720-173 CP3799-112 CP3789-106 CP3799-109 CP3799-6 CP3799-111 x 1 / CP3846-101 x 2 / CP3799-110 x 1CP3799-2/3/4/5S0L CP4518-DG CP3720-173 CP3799-113 CP3799-114 CP3799-109 CP3799-6 CP3799-111 x 1 / CP3846-101 x 2 / CP3799-110 x 1CP3801-2/3/4/5S7 CP4518-GK CP3720-173 CP3789-106 CP3394-109 CP3795-101 CP3799-6 CP3799-111 x 1 / CP3846-101 x 2 / CP3799-110 x 1CP3801-4/5S4 CP4518-GK CP3720-173 CP3789-106 CP3394-109 CP3795-101 CP3799-6 CP3799-111 x 1 / CP3846-101 x 2 / CP3799-110 x 1CP3808-4/5S4M CP4518-CE x 2 CP3880-1 CP3808-108 CP3808-107 CP3808-7 CP3808-109 x 4CP3809-2/3/4/5S0 CP4509-DG CP3720-173 CP3846-109 CP3846-108 CP3799-109 CP3799-6 CP3799-111 x 1 / CP3846-101 x 2 / CP3799-110 x 1CP3809-2/3/4/5S0M CP4509-DG CP3720-173 CP3809-106 CP3809-107 CP3799-109 CP3799-6 CP3799-111 x 1 / CP3846-101 x 2 / CP3799-110 x 1CP3894-12/13/14/15S4 CP4509-CEJ CP3720-173 CP3894-120 CP3894-121 CP3894-122 CP3895-109 CP3894-17 CP3895-107 x 1 / CP3895-117 x 2 / CP3895-106 x 1CP3894-14/15S4M CP4509-CEJ CP3720-173 CP3894-108 CP3894-109 CP3894-110 CP3895-109 CP3894-17 CP3895-107 x 1 / CP3895-117 x 2 / CP3895-106 x 1CP3894-2/4S4 CP4509-CEJ CP3720-182 CP3894-120 CP3894-121 CP3894-122 CP3895-109 CP3895-8 CP3895-107 x 1 / CP3895-117 x 2 / CP3895-106 x 1CP3894-2/4S4M CP4509-CEJ CP3720-182 CP3894-108 CP3894-109 CP3894-110 CP3895-109 CP3895-8 CP3895-107 x 1 / CP3895-117 x 2 / CP3895-106 x 1CP3894-52/53S4 CP4509-CEJ CP3720-182 CP3760-111 CP3894-120 CP3760-110 CP3894-144 CP3894-48 CP3894-129 x 1 / CP3894-128 x 1 / CP3894-130 x 2CP3894-52/53S4M CP4509-CEJ CP3720-182 CP3596-130 CP3894-108 CP3620-103 CP3894-144 CP3894-48 CP3894-129 x 1 / CP3894-128 x 1 / CP3894-130 x 2CP4066-12/13/14/15S4M CP4518-EH CP3720-182 CP4066-106 CP4066-107 CP3344-122 CP4066-6 CP3567-109 x 4CP4090-2/3/4/5S4 CP4518-CEJ CP3720-182 CP4090-114 CP4090-113 CP4090-112 CP3895-109 CP3895-8 CP3895-107 x 1 / CP3895-117 x 2 / CP3895-106 x 1CP4090-2/3/4/5S4M CP4518-CEJ CP3720-182 CP4090-108 CP6294-121 CP4090-107 CP3895-109 CP3895-8 CP3895-107 x 1 / CP3895-117 x 2 / CP3895-106 x 1CP4098-34/35S4VG CP4519-CEJ CP3720-182 CP4090-114 CP4090-113 CP4090-112 CP4098-30 CP4098-122 x 1 & -126 x 1 / CP3895-107 x 1 & -117 x 1CP4100-14/15T7L CP4519-E CP4100-113 CP4100-114 CP4100-115 CP4100-6CP4110-2/3T7 CP4519-KK CP3720-173 CP2290-50 CP4110-112 CP4110-111 CP3720-106 x 4CP4131-16/17S0 CP4518-AE CP3720-173 CP4296-110 CP4296-111 CP4131-20 CP4130-109 x 4CP4131-4/5S0 CP4518-AE CP3720-173 CP4296-110 CP4296-111 CP4131-7 CP4130-109 x 4CP4132-2/3S0 CP4518-CG CP3720-173 CP4145-101 CP3789-106 CP4131-20 CP4130-109 x 4CP4140-2/3/4/5S0 CP4518-AE CP3720-173 CP4140-107 CP4140-106 CP4140-6CP4140-2/3/4/5S0M CP4518-AE CP3720-173 CP4140-112 CP4140-111 CP4140-6CP4144-10/11S7 CP4519-EH CP3720-182 CP3636-107 CP3483-101 CP4144-101 CP4144-6 CP3645-104 x 2 / CP3645-105 x 2CP4144-2/3S7 CP4519-EH CP3720-182 CP3636-107 CP3483-101 CP4144-101 CP4144-6 CP3645-104 x 2 / CP3645-105 x 2CP4145-2/3S7 CP4519-CE CP3720-182 CP4145-101 CP4844-106 CP4145-106 CP4145-6 CP3645-104 x 2 / CP3645-105 x 2CP4145-8/9S7 CP4519-CE CP3720-182 CP4145-101 CP4844-106 CP4144-101 CP4145-7 CP3645-104 x 2 / CP3645-105 x 2CP4152-2/3S4 CP4518-GK CP3720-182 CP3567-108 CP3344-109 CP3344-122 CP4152-6 CP3567-109 x 4CP4169-2E0 CP4519-ADD CP4469-101 CP4466-151 CP4466-152 CP4466-108CP4176-3S0 CP4518-ADD CP4469-101 CP4466-151 CP4466-152 CP4466-108CP4218-2/3/4/5S4 CP4509-DEK CP3720-182 CP4218-130 CP4218-129 CP4218-128 CP3555-112 CP3555-28CP4218-2/3/4/5S4M CP4509-DEK CP3720-182 CP3555-215 CP3555-214 CP3555-213 CP3555-112 CP3555-28 CP4218-108 x 1 & -109 x 2 & -111 x 1CP4219-8/9/10/11S0 CP4518-GK CP3880-1 CP2270-92 CP2876-101 CP5200-124 CP4219-6 CP4219-107 x 4CP4226-2S0 CP4518-A CP4469-101 CP4226-103CP4227-2S0 CP4518-AA CP4469-101 CP4226-103CP4227-6S0 CP4518-AA CP4469-101 CP4226-103CP4228-10/11S4 CP4518-JJ CP3720-173 CP3215-113 CP4228-107 CP4228-6 CP5100-210 x 4CP4228-2/3/4/5S0 CP4518-JJ CP3720-173 CP3215-113 CP4228-106 CP4228-6 CP5100-210 x 4CP4228-8/9S4 CP4518-JJ CP3720-173 CP3215-113 CP4228-107 CP4228-6 CP5100-210 x 4CP4229-2/3/4/5S4 CP4518-EE CP3720-173 CP4229-106 CP4228-107 CP4228-6 CP5100-210 x 4CP4230-2/3S4L CP4509-DEK CP3720-182 CP4230-128 CP4230-127 CP4230-126 CP4230-109 CP4230-6 CP4230--112 x 1 & 113 x 1 & -114 x 2 CP4230-2/3S4M CP4509-DEK CP3720-182 CP4230-108 CP4230-107 CP4230-106 CP4230-109 CP4230-6 CP4230--112 x 1 & 113 x 1 & -114 x 2 CP4240-28/29S7M CP4518-CEJ CP3880-1 CP4960-104 CP4960-105 CP4960-106 CP4240-112 CP4240-6 CP4240-132 x 1 & -133 x 1 & -144 x 1 & -145 x 1CP4240-2/3/4/5S7M CP4518-CEJ CP3880-1 CP4240-111 CP4240-110 CP4240-109 CP4240-112 CP4240-6 CP4240-132 x 1 & -133 x 1 & -144 x 1 & -145 x 1CP4240-30/31/32/33S7M CP4518-CEJ CP3880-1 CP4960-104 CP4960-105 CP4960-106 CP4240-112 CP4240-6 CP4240-132 x 1 & -133 x 1 & -144 x 1 & -145 x 1CP4240-34/35/36/37S7M CP4518-CEJ CP3880-1 CP4960-104 CP4960-105 CP4960-106 CP4240-112 CP4240-6 CP4240-132 x 1 & -133 x 1 & -144 x 1 & -145 x 1CP4240-38/39S7M CP4518-CEJ CP3880-1 CP4970-113 CP4970-112 CP4970-111 CP4260-108 CP4240-40 CP4240-132 x 1 & -133 x 1 & -144 x 1 & -145 x 1CP4240-42/43/44/45S7M CP4518-CEJ CP3880-1 CP4970-113 CP4970-112 CP4970-111 CP4240-152 CP4240-41 CP4240-132 x 1 & -133 x 1 & -144 x 1 & -145 x 1CP4259-2/3/4/5S0M CP4509-CEJ CP3720-173 CP4259-114 CP4259-112 CP4259-108 CP4260-105 CP4260-6 CP4240-145 x 2 / CP4240-144 x 2CP4259-2/3/4/5S7M CP4509-CEJ CP3720-173 CP4259-114 CP4259-112 CP4259-108 CP4260-105 CP4260-6 CP4240-145 x 2 / CP4240-144 x 2CP4260-20/2/1/22/23S7M CP4518-CEJ CP3880-1 CP4240-111 CP4240-110 CP4240-109 CP4260-115 CP4260-24 CP4240-145 x 2 / CP4240-144 x 2CP4260-26/27/28/29S7M CP4518-CEJ CP3880-1 CP4240-111 CP4240-110 CP4240-109 CP4240-112 CP4240-40 CP4240-145 x 2 / CP4240-144 x 2CP4260-30/31/32/33S7M CP4518-CEJ CP3880-1 CP4960-104 CP4960-105 CP4960-106 CP4240-112 CP4260-7 CP4240-145 x 2 / CP4240-144 x 2CP4340-2/3/4/5S7L CP4518-CEJ CP3880-1 CP4340-106 CP4340-107 CP5015-107 CP4578-101 CP4340-10 CP4218-125 x 2 & -126 x 1 & -127 x 1CP4360-10/11S7L CP4518-DEK CP3880-1 CP4360-104 CP5820-109 CP5820-107 CP4360-14 CP4360-6 CP4970-104 x 4CP4360-20/21S7L CP4518-DEK CP3880-1 CP4360-126 CP4360-127 CP4360-128 CP4370-104 CP4360-17 CP4970-104 x 4CP4360-2/3/4/5S7L CP4518-DEK CP3880-1 CP4360-126 CP4360-127 CP4360-128 CP4360-17 CP4970-104 x 4CP4360-8/9S7L CP4518-DEK CP3880-1 CP4360-104 CP5820-109 CP5820-107 CP4360-14 CP4360-6 CP4970-104 x 4CP4370-2/3/4/5S7L CP4509-DEK CP3880-1 CP4370-105 CP4370-106 CP4370-107 CP4370-104 CP4360-17 CP4970-104 x 4CP4380-2/3/4/5S7L CP4518-ACE CP3880-1 CP4380-101 CP4340-106 CP4340-107 CP4578-101 CP4340-10 CP4218-125 x 2 & -126 x 1 & -127 x 1CP4398-2/3S0S NOT AVAILABLE 3486-268 CP4398-113 CP4398-111CP4398-2/3S4S NOT AVAILABLE 3486-268 CP4398-113 CP4398-111CP4466-12/13E0 CP4518-ADD CP4469-101 CP3666-106 CP3485-106 CP4466-108CP4469-2E0 CP4518-ADD CP4469-101 CP3666-106 CP3485-106 CP4466-108CP4477-2/3E0 CP4518-ADD CP4469-101 CP3666-106 CP3485-106 CP4466-108CP4484-4S0 CP4518-HH CP4469-101 CP3769-106 CP4484-101CP4488-12/13E0 CP4518-EH CP4469-101 CP4488-107 CP4488-106CP4488-12/13E0M CP4518-EH CP4469-101 CP4488-113 CP4488-112CP4488-8E0 CP4518-EH CP4469-101 CP4488-107 CP4488-106CP4490-2/3E0 CP4518-ADD CP4469-101 CP4466-151 CP4466-152 CP4466-108CP4498-2/3E0 CP4518-ADD CP4469-101 CP3666-106 CP3485-106 CP4466-108CP4554-2/3S4 CP4518-DEK CP3720-182 CP4554-116 CP4554-115 CP3714-110 CP3554-108 CP3554-6 CP3555-192 x 4CP4556-14/15/16/17S4 CP4509-EE CP3720-173 CP3577-103 CP3344-122 CP4556-7 CP3567-109 x 4CP4557-2/3S0M CP4518-DG CP3720-173 CP4994-118 CP4995-117 CP3344-122 CP4556-6 CP3567-109 x 4CP4558-2/3S0M CP4509-DG CP3720-173 CP4558-107 CP4558-106 CP3344-122 CP4556-6 CP3567-109 x 4CP4567-8/9/10/11S4 CP4518-GK CP3720-173 CP3567-114 CP4270-3 CP4567-110 CP4567-7 CP4567-120 x 4 / Pad Retainer Bolt CP5100-126CP4567-12/13/14/15S4 CP4518-GK CP3720-173 CP3567-114 CP4270-3 CP5100-117 CP4567-16 CP4567-120 x 4 / Pad Retainer Bolt CP5100-139CP4567-18/19/20/21S4 CP4518-GK CP3720-173 CP3567-114 CP4270-3 CP4567-125 CP4567-17 CP4567-120 x 4 / Pad Retainer Bolt CP5689-109CP4567-2/3/4/5S4 CP4518-GK CP3720-173 CP3567-114 CP4270-3 CP5100-116 CP4567-6 CP4567-120 x 4 / Pad Retainer Bolt CP5100-210CP4568-6/7S0L CP4518-EG CP3720-173 CP4568-105 CP4568-104 CP5100-116 CP4567-6 CP4567-120 x 4CP4586-4E0 CP4518-H CP3720-182 CP3177-102CP4586-5E7 CP4518-H CP3720-182 CP3177-102CP4595-6/7S0L CP4518-EJL 92598 CP4595-133 CP4595-132 CP4595-134 CP4595-120 CP4595-14 CP4595-114 x 4CP4596-4E0 CP4518-E CP3720-182 CP3178-102CP4638-2E0 CP4518-H 3486-229 CP4638-104CP4649-2E0 CP4518-L 3486-229 CP3697-104CP4680-3S0 CP4518-EH CP4469-101 CP4485-112 CP4485-113CP4680-9S0 CP4518-EH CP4469-101 CP4485-112 CP4485-113CP4720-12/15S4M CP4518-CEJ CP3720-173 CP4720-110 CP4720-111 CP4720-112 CP4720-6 CP4720-117 x 4CP4720-13/14S4M CP4518-CEJ CP3720-173 CP4720-110 CP4720-111 CP4720-112 CP4720-7 CP4720-117 x 4CP4751-10/11S0L CP4518-GG CP3720-182 CP4751-129 CP5751-109 CP4751-13 CP6751-111 x 2 / CP6751-110 x 2CP4751-8/9S0L CP4518-GG CP3720-182 CP4751-129 CP4751-104 CP4751-12 CP6751-111 x 2 / CP6751-110 x 2CP4760-8/9S0M CP4518-CEJ CP3720-173 CP4760-108 CP4760-107 CP4760-106 CP4760-115 CP4760-7 CP4760-113 x 1 / CP4760-112 x 1 / CP4720-108 x 2CP4761-10/11S0L CP4518-EE CP3720-182 CP4761-111 CP5751-109 CP4751-13 CP6751-111 x 2 / CP6751-110 x 2CP4761-8/9S0L CP4518-EE CP3720-182 CP4761-111 CP4751-104 CP4751-12 CP6751-111 x 2 / CP6751-110 x 2CP4771-8/9S0L CP4518-DD CP3720-182 CP4771-110 CP4751-104 CP4751-12 CP6751-111 x 2 / CP6751-110 x 2CP4781-10/11S0L CP4518-AA CP3720-182 CP4781-104 CP5751-109 CP4751-13 CP6751-111 x 2 / CP6751-110 x 2CP4795-2/3/4/5S7 CP4509-CEK CP3720-182 CP4795-108 CP4695-111 CP4795-107 CP4695-101 CP4795-6 CP4575-108 x 2 / CP4695-107 x 2CP4848-2S0MC CP4518-AEAE CP3880-1 CP4848-104 CP4848-105 CP4848-6 CP4848-107 x 2 / CP4848-108 x 4CP4848-3S0MC CP4518-AEAE CP3880-1 CP4848-104 CP4848-105 CP4848-7 CP4848-107 x 2 / CP4848-108 x 4CP4848-4S0MC CP4518-AEAE CP3880-1 CP4848-104 CP4848-105 CP4848-8 CP4848-107 x 2 / CP4848-108 x 4CP4848-5S0MC CP4518-AEAE CP3880-1 CP4848-104 CP4848-105 CP4848-9 CP4848-107 x 2 / CP4848-108 x 4CP4849-2R0L CP4518-AEAE CP4849-104 CP4849-105 CP4849-6 CP4848-107 x 2 / CP4848-108 x 4


36

+44 (0)24 7663 9595



Piston 1 Part No.

Piston 2Part No.

Piston 3Part No.



CP4849-2S0MC CP4518-AEAE CP3880-1 CP4848-104 CP4848-105 CP4848-6 CP4848-107 x 2 / CP4848-108 x 4CP4849-3R0L CP4518-AEAE CP4849-104 CP4849-105 CP4849-7 CP4848-107 x 2 / CP4848-108 x 4CP4849-3S0MC CP4518-AEAE CP3880-1 CP4848-104 CP4848-105 CP4848-7 CP4848-107 x 2 / CP4848-108 x 4CP4849-4R0L CP4518-AEAE CP4849-106 CP4849-107 CP4849-8 CP4848-107 x 2 / CP4848-108 x 4CP4849-4S0MC CP4518-AEAE CP3880-1 CP4848-104 CP4848-105 CP4848-8 CP4848-107 x 2 / CP4848-108 x 4CP4849-5R0L CP4518-AEAE CP4849-106 CP4849-107 CP4849-9 CP4848-107 x 2 / CP4848-108 x 4CP4849-5S0MC CP4518-AEAE CP3880-1 CP4848-104 CP4848-105 CP4848-9 CP4848-107 x 2 / CP4848-108 x 4CP4907-2/3/4/5S0M CP4518-CEJ CP3720-173 CP4910-116 CP4910-115 CP4910-114 CP3796-134 CP4907-6 CP4907-111 x 1 / CP4907-109 x 2 / CP4907-110 x 1CP4907-2/3/4/5S4 CP4518-CEJ CP3720-173 CP4910-141 CP4910-140 CP3344-192 CP3796-134 CP4907-6 CP4907-111 x 1 / CP4907-109 x 2 / CP4907-110 x 1CP4907-2/3/4/5S4L CP4518-CEJ CP3720-173 CP4907-106 CP4907-107 CP4907-108 CP3796-134 CP4907-6 CP4907-111 x 1 / CP4907-109 x 2 / CP4907-110 x 1CP4909-10/11S0M CP4518-CEJ CP3720-173 CP4910-116 CP4910-115 CP4910-114 CP3796-134 CP4909-7 CP4910-119 x 1 / CP4096-126 x 2 / CP4910-118 x 1CP4909-10/11S4 CP4518-CEJ CP3720-173 CP4910-141 CP4910-140 CP3344-192 CP3796-134 CP4909-7 CP4910-119 x 1 / CP4096-126 x 2 / CP4910-118 x 1CP4909-4/5S0M CP4518-CEJ CP3720-173 CP4910-116 CP4910-115 CP4910-114 CP3796-135 CP4909-6 CP4910-119 x 1 / CP4096-126 x 2 / CP4910-118 x 1CP4910-10/11/12/13S0 CP4518-CEJ CP3720-173 CP4910-141 CP4910-140 CP3344-192 CP3796-135 CP4910-14 CP4910-119 x 1 / CP3894-130 x 2 / CP4910-118 x 1CP4910-10/11/12/13S0M CP4518-CEJ CP3720-173 CP4910-116 CP4910-115 CP4910-114 CP3796-135 CP4910-14 CP4910-119 x 1 / CP3894-130 x 2 / CP4910-118 x 1CP4910-16/17/18/19S0M CP4518-CEJ CP3720-173 CP4910-116 CP4910-115 CP4910-114 CP3796-134 CP4910-15 CP4910-119 x 1 / CP3894-130 x 2 / CP4910-118 x 1CP4910-18/19S4 CP4518-CEJ CP3720-173 CP4910-141 CP4910-140 CP3344-192 CP3796-134 CP4910-15 CP4910-119 x 1 / CP3894-130 x 2 / CP4910-118 x 1CP4910-26/27/28/29S0 CP4518-CEJ CP3720-173 CP4910-156 CP4910-155 CP4910-154 CP3796-134 CP4910-25 CP4910-159 x 1 / CP4910-158 x 1 / CP3894-130 x 2CP4910-30/31S4M CP4518-CEJ CP3720-173 CP4910-116 CP4910-115 CP4910-114 CP3796-134 CP4910-24 CP4910-119 x 1 / CP3894-130 x 2 / CP4910-118 x 1CP4910-32/33/34/35S0 CP4518-CEJ CP3720-173 CP4910-156 CP4910-155 CP4910-154 CP3796-135 CP4910-36 CP4910-163 x 1 / CP4910-162 x 1 / CP3894-130 x 2CP4910-6/7/8/9S0M CP4518-CEJ CP3720-173 CP4910-116 CP4910-115 CP4910-114 CP3796-135 CP4910-14 CP4910-119 x 1 / CP3894-130 x 2 / CP4910-118 x 1CP4915-4/5S4M CP4518-ACE CP3720-173 CP4915-106 CP4910-116 CP4910-115 CP3796-135 CP4910-14 CP4910-119 x 1 / CP3894-130 x 2 / CP4910-118 x 1CP4920-10/11S0M CP4518-CEJ CP3720-182 CP4910-122 CP4910-121 CP4910-120 CP3895-109 CP4894-50 CP4894-157 x 1 / CP3894-130 x 2 / CP4894-156 x 1CP4920-10/11/12/13S4 CP4518-CEJ CP3720-182 CP4920-116 CP4920-115 CP4920-114 CP3895-109 CP4894-50 CP4894-157 x 1 / CP3894-130 x 2 / CP4894-156 x 1CP4920-12/13S4M CP4518-CEJ CP3720-182 CP4910-122 CP4910-121 CP4910-120 CP3895-109 CP4894-50 CP4894-157 x 1 / CP3894-130 x 2 / CP4894-156 x 1CP4920-14/15/16/17S0M CP4518-CEJ CP3720-182 CP4910-122 CP4910-121 CP4910-120 CP4894-142 CP4894-31 CP4894-157 x 1 / CP3894-130 x 2 / CP4894-156 x 1CP4920-8/9S0M CP4518-CEJ CP3720-182 CP4910-122 CP4910-121 CP4910-120 CP3895-109 CP4894-54 CP4894-157 x 1 / CP3894-130 x 2 / CP4894-156 x 1CP4921-4/5S4M CP4518-ACE CP3720-182 CP4921-106 CP4910-122 CP4910-121 CP3895-109 CP4894-50 CP4894-157 x 1 / CP3894-130 x 2 / CP4894-156 x 1CP4922-2/3/4/5S4M CP4518-BEG CP3720-182 CP4910-121 CP4922-109 CP4922-108 CP3895-109 CP4894-50 CP4894-157 x 1 / CP3894-130 x 2 / CP4894-156 x 1CP4922-8/9S4M CP4518-BEG CP3720-182 CP4910-121 CP4922-109 CP4922-108 CP3894-131 CP4894-50 CP4894-157 x 1 / CP3894-130 x 2 / CP4894-156 x 1CP4960-10/11S0M CP4518-CEJ CP3720-182 CP4960-110 CP4960-111 CP4960-112 CP4240-112 CP4960-6CP4960-2/3/4/5S0M CP4518-CEJ CP3720-182 CP4960-104 CP4960-105 CP4960-106 CP4240-112 CP4960-6CP4960-8/9S0M CP4518-CEJ CP3720-182 CP4960-110 CP4960-111 CP4960-112 CP4240-112 CP4960-6CP4970-22/23S0M CP4518-CEJ CP3880-1 CP4970-113 CP4970-112 CP4970-111 CP4979-107 CP4970-11 CP4970-104 x 4CP4970-2/3S0M CP4518-CEJ CP3880-1 CP4970-113 CP4970-112 CP4970-111 CP4979-107 CP4970-11 CP4970-104 x 4CP5000-10/11/12/13S4 CP4518-JL CP3720-182 CP5000-109 CP3714-111 CP3714-190 CP3714-2 CP3714-153 x 4CP5000-20/21/22/23S4 CP4518-JL CP3720-182 CP3344-192 CP5000-209 CP4890-101 CP5000-25CP5000-56/57/58/59S4 CP4518-JK CP3720-173 CP3584-101 CP3434-116 CP5200-110 CP5000-49 CP5200-306 x 2 / CP5200-307 x 2CP5006-2/3S4 CP4518-JL CP3720-173 CP3344-192 CP5000-209 CP4890-101 CP3720-34 CP5006-106 x 4CP5015-2/3/4/5S4 CP4518-KL CP3880-1 CP5015-108 CP5015-110 CP5015-106 CP5015-6 CP5300-113 x 4CP5016-2/3/4/5S4 CP4518-HJ CP3880-1 CP5015-107 CP5015-109 CP5015-106 CP5015-6 CP5300-113 x 4CP5017-2/3/4/5S4 CP4518-JK CP3880-1 CP5015-107 CP5015-108 CP5015-106 CP5015-6 CP5300-113 x 4CP5018-2/3/4/5S4 CP4518-KL CP3880-1 CP5015-108 CP5015-110 CP5015-106 CP5015-6 CP5300-113 x 4CP5020-20/21S0 CP4518-H CP3720-173 CP3177-102 CP5310-21 CP5310-103 x 4CP5030-10S0 CP4518-GK CP3720-173 CP5030-108 CP5030-107 CP5030-7CP5030-11S0 CP4518-GK CP3720-173 CP5030-108 CP5030-107 CP5030-6CP5030-12/15S0 CP4518-GK CP3720-173 CP5030-108 CP5030-107 CP5030-16CP5030-13/14S0 CP4518-GK CP3720-173 CP5030-108 CP5030-107 CP5030-17CP5030-8S0 CP4518-GK CP3720-173 CP5030-108 CP5030-107 CP5030-6CP5030-9S0 CP4518-GK CP3720-173 CP5030-108 CP5030-107 CP5030-7CP5040-10/11/12/13S4 CP4518-JJ CP3720-173 CP3215-113 CP5100-116 CP5000-54 CP5100-210 x 2 / CP5100-211 x 2CP5040-20/21/22/23S4 CP4518-JL CP3720-182 CP5000-109 CP3714-111 CP3714-190 CP3714-2 CP3714-153 x 4CP5040-2/3/4/5S4 CP4518-JK CP3720-173 CP3584-101 CP3434-116 CP5200-124 CP5000-44 CP5200-306 x 2 / CP5200-307 x 2CP5040-30/31/32/33S4 CP4518-JL CP3720-173 CP3636-107 CP3394-110 CP3795-101 CP5040-7 CP3799-111 x 1 / CP3846-101 x 2 / CP3799-110 x 1CP5040-38/39S4 CP4518-JK CP3720-173 CP3584-101 CP3434-116 CP5200-124 CP5000-44 CP5200-306 x 2 / CP5200-307 x 2CP5045-10/11S7L CP4518-JL CP3880-2 CP5045-110 CP5045-111 CP5045-7 CP3714-153 x 4CP5045-2/3S7L CP4518-JL CP3880-2 CP5045-106 CP5045-107 CP5045-7 CP3714-153 x 4CP5045-8/9S7L CP4518-JL CP3880-2 CP5045-110 CP5045-111 CP5045-7 CP3714-153 x 4CP5048-2/3/4/5S0M CP4518-AEAE CP3720-182 CP5048-508 CP6294-121 CP5048-6 CP5048-507 x 4CP5055-2/3/4/5S7 CP4519-AEAE CP3880-1 CP5055-107 CP4920-115 CP5055-10 CP5055-109 x 2 / CP5055-108 x 2CP5060-10/11/12/13S4 CP4518-CEJ CP3880-1 CP4910-156 CP4910-155 CP4910-154 CP5555-126 CP5560-6 CP5555-120 x 4CP5060-2/3/4/5S4 CP4518-CEJ CP3880-1 CP4910-156 CP4910-155 CP4910-154 CP5555-109 CP5560-12 CP5555-120 x 4CP5066-2/3/4/5S0 CP4518-EEE CP3720-182 CP3650-107 CP5066-6CP5066-2/3/4/5S0M CP4518-EEE CP3720-182 CP6294-121 CP5066-6CP5070-6/8S7 CP4519-CEJ CP3720-182 CP5070-107 CP5070-106 CP5070-105 CP5070-104 CP5070-10 CP5070-115 x 2 / CP4098-122 x 2CP5070-7/9S7 CP4519-CEJ CP3720-182 CP5070-107 CP5070-106 CP5070-105 CP5070-104 CP5070-11 CP5070-115 x 2 / CP4098-122 x 2CP5090-2/3/4/5S4 CP4518-JL CP3880-1 CP3636-107 CP3394-110 CP3795-101 CP5080-109 CP5080-108 x 4CP5099-8/9S4S CP4519-KL 3486-268 CP5099-108 CP5099-109 3662-290CP5095-2/3/4/5S7L CP4518-CEJ CP3880-1 CP5260-109 CP5260-110 CP5260-111 RH = CP5095-112 / LH = -113 CP6075-105 x 4CP5100-26/27/28/29S4 CP4519-JJ CP3720-173 CP2409-160 CP5100-117 CP5100-11 CP5100-210 x 2 / CP5100-211 x 2CP5100-32/33/34/35S4 CP4519-JJ CP3720-173 CP2409-160 CP5100-116 CP5100-10 CP5100-210 x 2 / CP5100-211 x 2CP5100-802/803/804/805S4 CP4519-JJ CP3720-173 CP2409-160 CP5100-117 CP5100-11 CP5100-210 x 2 / CP5100-211 x 2CP5100-806/807/808/809S4 CP4519-JJ CP3720-173 CP2409-160 CP5100-116 CP5100-10 CP5100-210 x 2 / CP5100-211 x 2CP5100-806/807S4R2 CP4519-JJ CP3720-173 CP2409-160 CP5100-116 CP5100-10 CP5100-210 x 2 / CP5100-211 x 2CP5100-810/811/812/813S4 CP4519-JJ CP3720-173 CP2409-160 CP5100-177 CP5100-40 CP5100-210 x 2 / CP5100-211 x 2CP5104-2/3S4 CP4519-JJ CP3720-173 CP2409-160 CP5100-116 CP5100-10 CP5100-210 x 2 / CP5100-211 x 2CP5104-802/803/804/805S4 CP4519-JJ CP3720-173 CP2409-160 CP5100-116 CP5104-10 CP5100-210 x 2 / CP5100-211 x 2CP5105-10/11/12/13S4 CP4519-JJ CP3720-173 CP2409-160 CP5100-116 CP5100-10 CP5100-210 x 2 / CP5100-211 x 2CP5105-6/7/8/9S4 CP4519-JJ CP3720-173 CP3228-103 CP5100-149 CP5100-18 CP5100-210 x 2 / CP5100-211 x 2CP5106-2/3/4/5S4 CP4518-JJ CP3720-173 CP3228-103 CP5106-114 CP5106-6 CP5100-210 x 4CP5108-4/5S4 CP4519-CE CP3720-173 CP5108-106 CP4296-111 CP5100-117 CP5100-11 CP5100-210 x 2 / CP5100-211 x 2CP5108-4/5S4SV CP4519-CE CP3720-173 CP5108-106 CP4296-111 CP5100-117 CP5100-11 CP5100-210 x 2 / CP5100-211 x 2CP5108-802/803/804/805S4 CP4519-CE CP3720-173 CP5108-106 CP4296-111 CP5100-117 CP5100-11 CP5100-210 x 2 / CP5100-211 x 2CP5108-802/803/804/805S4R2 CP4519-CE CP3720-173 CP5108-106 CP4296-111 CP5100-117 CP5100-11 CP5100-210 x 2 / CP5100-211 x 2CP5108-802/803S4VG CP4519-CE CP3720-173 CP5108-106 CP4296-111 CP5100-117 CP5100-11 CP5100-210 x 2 / CP5100-211 x 2CP5108-806/807/808/809S4 CP4519-CE CP3720-173 CP5108-106 CP4296-111 CP5100-116 CP5100-10 CP5100-210 x 2 / CP5100-211 x 2CP5116-2/3/4/5S0 CP4518-CG CP3720-182 CP5555-108 CP2877-101 CP5116-6 CP5234-117 x 4CP5118-2/3S0RD CP4519-J CP3880-1 CP5118-103(6026) CP5119-107 CP5118-10CP5119-12/13S4 CP4519-L CP3720-173 CP5119-104 CP5119-111 CP5119-144 CP5111-12CP5119-22/23T0 CP4519-L CP3720-173 CP5235-108 CP5119-144 CP5111-10CP5119-36/37T0 CP4519-L CP3720-173 CP5235-108 CP5111-10CP5119-4/5T4 CP4519-L CP3720-173 CP5119-104 CP5111-10CP5119-50/51T0 CP4519-L CP3720-173 CP5235-108 CP5119-144 CP5111-10CP5119-8/9T0 CP4519-L CP3720-173 CP5235-108 CP5119-107 CP5119-106CP5119-48/49TO CP4519-L CP3720-173 CP5235-108 CP5119-144 CP5111-10CP5119-50/51T0 CP4519-L CP3720-173 CP5235-108 CP5119-144 CP5111-10CP5119-8/9T0 CP4519-L CP3720-173 CP5235-108 CP5119-107 CP5119-106CP5126-2/3T0 CP4519-K CP3720-173 CP5126-106(6026) CP5119-144 CP5126-10CP5128-2/3T0 CP4519-J CP3880-1 CP5128-104(6026) CP5119-144 CP5128-10CP5129-2/3/4/5S0 CP4518-CG CP3880-2 CP6235-110 CP5129-106 CP5129-6 CP5234-117 x 4CP5138-2/3/4/5S0 CP4518-CG CP3880-2 CP6235-110 CP5129-106 CP5138-106 CP5129-6 CP5234-117 x 4CP5139-2/3S0 CP4518-CG CP3880-2 CP6235-110 CP5129-106 CP5139-107 x 2 / CP5139-106 x 2CP5144-18/19S4 & R2 CP4519-CC CP3720-173 CP5108-106 CP5144-114 CP5144-14 CP5100-210 x2 / CP5100-211 x 2CP5144-802/803S4 / R2 & VG CP4519-CC CP3720-173 CP5108-106 CP5144-114 CP5144-14 CP5100-210 x2 / CP5100-211 x 2CP5145-2/3S7 CP4519-EE CP3720-173 CP5145-103 CP5145-104 CP5145-10 CP3720-106 x 4CP5147-802/803/804/805S4&VG CP4519-CC CP3720-173 CP5108-106 CP5100-116 CP5100-10 CP5100-210 x2 / CP5100-211 x 2CP5148-12/14S0 CP4518-AEAE CP3880-1 CP5148-116 CP3178-102 CP5148-10 CP5148-110 x 4CP5148-13/15S0 CP4518-AEAE CP3880-1 CP5148-116 CP3178-102 CP5148-11 CP5148-110 x 4CP5148-16/18S0 CP4518-AEAE CP3880-1 CP5148-116 CP3178-102 CP5148-20 CP5148-110 x 4CP5148-17/19S0 CP4518-AEAE CP3880-1 CP5148-116 CP3178-102 CP5148-21 CP5148-110 x 4CP5148-2/4S0 CP4518-AEAE CP3880-1 CP5148-116 CP3178-102 CP5148-10 CP5148-110 x 4CP5148-2/4S0M CP4518-AEAE CP3880-1 CP5148-118 CP4760-107 CP5148-10 CP5148-110 x 4CP5148-3/5S0 CP4518-AEAE CP3880-1 CP5148-116 CP3178-102 CP5148-11 CP5148-110 x 4CP5148-3/5S0M CP4518-AEAE CP3880-1 CP5148-118 CP4760-107 CP5148-11 CP5148-110 x 4CP5156-2/3S0 CP4519-H CP3720-173 CP5311-103 CP5119-144 CP5111-10


37

www.apracing.com

Caliper Assemblies Seal Repair KitPart No.


Piston 1 Part No.

Piston 2Part No.

Piston 3 Part No.



CP5157-2/3S0 CP4519-E CP3720-173 CP5157-104 CP5119-144 CP5111-10CP5200-12/14S4 CP4519-JK CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 x 2 / CP5200-307 x 2CP5200-32/33/34/35S4 CP4519-JK CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 x 2 / CP5200-307 x 2CP5200-40/41/42/43S4 CP4519-JK CP3720-173 CP2889-105 CP3357-111 CP5200-162 CP5200-31 CP5200-306 x 2 / CP5200-307 x 2CP5200-74/75/76/77S4 CP4519-JK CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 x 2 / CP5200-307 x 2CP5200-802/803/804/805S4 CP4519-JK CP3720-173 CP2409-124 CP2290-50 CP5200-110 CP5200-6 CP5200-306 x 2 / CP5200-307 x 2CP5200-806/7/8/9S4 / R2 / S2 & VG CP4519-JK CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 x 2 / CP5200-307 x 2CP5200-810/811/812/813S4 CP4519-JK CP3720-173 CP2409-124 CP2290-50 CP5200-110 CP5200-6 CP5200-306 x 2 / CP5200-307 x 2CP5200-814/815S4 CP4519-JK CP3720-173 CP2889-105 CP3357-111 CP5200-313 CP5200-57 CP5200-306 x 2 / CP5200-307 x 2CP5200-824/825/826/827S4 CP4519-JK CP3720-173 CP2889-105 CP3357-111 CP5200-162 CP5200-31 CP5200-306 x 2 / CP5200-307 x 2CP5200-828/829/830/831S4 & R2 CP4519-JK CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 x 2 / CP5200-307 x 2CP5200-828/829S4VG CP4519-JK CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 x 2 / CP5200-307 x 2CP5200-832/833S4 CP4519-JK CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 x 2 / CP5200-307 x 2CP5200-836/837S4 & R2 CP4519-JK CP3720-173 CP2889-105 CP3357-111 CP5200-191 CP5200-190 CP5200-306 x 2 / CP5200-307 x 2CP5200-90/91S4 CP4519-JK CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 x 2 / CP5200-307 x 2CP5205-14/15/16/17S4 CP4519-JK CP3720-173 CP4090-112 CP5205-101 CP5200-110 CP5200-6 CP5200-306 x 2 / CP5200-307 x 2CP5205-18/19/20/21S4 CP4519-JK CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 x 2 / CP5200-307 x 2CP5206-4/5S4 CP4519-HH CP3720-173 CP5206-106 CP5200-124 CP5200-16 CP5200-306 x 2 / CP5200-307 x 2CP5207-4/5/6/7S4 CP4519-DE CP3720-173 CP3650-107 CP5207-105 CP5207-104 CP5200-306 x 2 / CP5200-307 x 2CP5207-8/9S4 CP4519-DE CP3720-173 CP3650-107 CP5207-105 CP5207-104 CP5200-306 x 2 / CP5200-307 x 2CP5208-12/13/14/15S4 CP4519-HJ CP3720-173 CP2409-124 CP3639-107 CP5208-208 CP5208-8 CP5200-306 x 2 / CP5200-307 x 2CP5210-2/3/4/5S0M CP4518-CEJ CP3720-182 CP5210-106 CP5210-105 CP5210-104 CP4612-110 CP5611-6CP5211-12/13S4 / RD / SV & YW CP4519-J CP3720-173 CP2260-66 CP5211-10CP5211-22/23S0 CP4519-J CP3720-173 CP2260-66 CP5211-10CP5211-24/25S0 CP4519-J CP3720-173 CP2260-66 CP5211-17CP5211-2/3S4 CP4519-J CP3720-173 CP2260-66 CP5211-10CP5211-2/3S4RD CP4519-J CP3720-173 CP2260-66 CP5211-10CP5219-16/17/18/19S0 CP4518-GK CP3880-1 CP2876-101 CP2270-92 CP4219-122 CP5219-6 CP4219-127 x 4 / Pad Retainer Bolt No. CP5100-126CP5260-2/3/4/5S7L CP4518-CEJ CP3880-1 CP5260-109 CP5260-110 CP5260-111 CP5260-108 CP5260-6 CP5260-106 x 4CP5260-8/9/10/11S7L CP4518-CEJ CP3880-1 CP5260-109 CP5260-110 CP5260-111 CP4578-101 CP5260-12 CP5260-106 x 4CP5266-2/3/4/5S0M CP4518-GGG CP3720-182 CP5166-106 CP5266-6CP5270-2/3/4/5S7L CP4518-CEJ CP3880-1 CP5260-109 CP5260-110 CP5260-111 CP4578-101 CP5260-12 CP5260-106 x 2 / CP5270-104 x 1 / CP5270-105 x 1CP5300-14/15S4 CP4519-KL CP3720-173 CP5300-108 CP5300-109 CP5300-115 CP5300-10 CP5300-113 x 4CP5300-4/5/6/7S4 CP4519-KL CP3720-173 CP5300-108 CP5300-109 CP5300-115 CP5300-10 CP5300-113 x 4CP5300-8/9S4 CP4519-KL CP3720-173 CP5300-108 CP5300-109 CP5300-115 CP5300-10 CP5300-113 x 4CP5309-2/3S0 CP4519-EH CP3880-1 CP6609-106(6026) CP6609-107(6026) CP5309-10 CP5309-106 x 1 / CP5309-107 x 1 / CP5320-107 x 2CP5310-4/5S0 CP4518-H CP3720-173 CP3177-102 CP5310-22 CP5310-103 x 4CP5311-22/23S0 CP4519-H CP3720-173 CP5311-103 CP5211-10CP5311-24/25S0 CP4519-H CP3720-173 CP5311-103 CP5211-10CP5315-2/3S0 CP4519-H CP3880-1 CP5315-103(6026) CP5315-10CP5316-2/3S0 CP4519-J CP3880-1 CP5128-104(6026) CP5119-144 CP5317-10CP5316-2/3S0RD CP4519-J CP3880-1 CP5128-104(6026) CP5119-144 CP5317-10CP5317-2/3S0 CP4519-K CP3880-1 CP5317-103(6026) CP5119-144 CP5317-10CP5317-6/7S0 & R2 CP4519-K CP3880-1 CP5317-103(6026) CP5317-10CP5317-8/9S0 CP4519-K CP3880-1 CP5317-103(6026) CP5119-144 CP5317-10CP5319-2/3S0 CP4519-DE CP3880-1 CP6606-109(6026) CP6609-106(6026) CP5309-10 CP5309-106 x 1 / CP5309-107 x 1 / CP5320-107 x 2CP5320-2/3S4 & S7 CP4519-KK CP3720-173 CP5320-106 CP5320-107 x 4CP5325-2/3S0 CP4519-K CP3880-1 CP5317-103(6026) CP5119-144 CP5317-10CP5410-2/3/4/5S0L CP4518-ED CP3880-2 CP5410-106 CP5410-107 CP4751-104 CP5610-6 CP5610-106 x 4CP5420-4/5S0L CP4518-DE CP3880-2 CP5825-109 CP6261-107 CP5420-106 x 1, Ctr Beam / CP5880-107 x 4CP5421-4/5S0L CP4518-CD CP3880-2 CP6260-107 CP6261-107 CP5420-106 x 1, Ctr Beam / CP5880-107 x 4CP5510-14/15S0L CP4518-DC CP3880-2 CP5510-116 CP5410-106 CP5510-106 CP5510-6 CP5610-106 x 4 CP5510-2/3/4/5S0L CP4518-DC CP3880-2 CP5510-116 CP5410-106 CP4751-104 CP5610-6 CP5610-106 x 4CP5515-4/5S0 CP4518-DC CP3880-2 CP5515-110 CP5515-111 CP4751-104 CP5610-6 CP5610-106 x 4CP5515-8/9S0 CP4518-DC CP3880-2 CP5515-110 CP5515-111 CP5510-106 CP5510-6 CP5610-106 x 4CP5555-12/13/14/15S4 CP4519-CEJ CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-11 CP5555-120 x 4CP5555-2/3S4 CP4519-CEJ CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-109 CP5555-10 CP5555-120 x 4CP5555-4/5S7 CP4519-CEJ CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-109 CP5555-10 CP5555-120 x 4CP5555-66/67/68/69S4 CP4519-CEJ CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-70 CP5555-120 x 4CP5555-802/3/4/5S4 / R2 & VG CP4519-CEJ CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-109 CP5555-10 CP5555-120 x 4CP5555-806/807/808/809S4 CP4519-CEJ CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-70 CP5555-120 x 4CP5555-808/809/810/811S4R2&VG CP4519-CEJ CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-70 CP5555-120 x 4CP5555-810/811/812/813S4 CP4519-CEJ CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-11 CP5555-120 x 4CP5555-814/5/6/7S4 / R2 & VG CP4519-CEJ CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-11 CP5555-120 x 4CP5555-818/819S4 CP4519-CEJ CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-11 CP5555-120 x 4CP5555-824/825S4 CP4519-CEJ CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-70 CP5555-120 x 4CP5555-826/827/828/829S4 CP4519-CEJ CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-11 CP5555-120 x 4CP5555-830/831S4 & R2 CP4519-CEJ CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-109 CP5555-10 CP5555-120 x 4CP5555-838/839S4 CP4519-CEJ CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP6136-109 CP5555-10 CP5555-120 x 4CP5555-84/85S4 CP4519-CEJ CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-155 CP5555-46 CP5555-174 x 4CP5560-32/33/34/35S0L CP4518-CEJ CP3880-1 CP5560-108 CP5560-109 CP5560-110 CP5555-126 CP5560-26 CP5555-120 x 4CP5567-2/3S4 CP4518-GK CP3880-1 CP5567-106 CP5567-107 CP5567-108 x 4 + CP5567-109 x 1 CTR BEAMCP5570-802/3/4/5S4 / R2 & VG CP4519-CEJ CP2889-105 CP4689-108 CP5145-103 CP2889-105 CP5200-124 CP5555-56 CP5555-174 x 4CP5570-806/807S4 & R2 CP4519-CEJ CP2889-105 CP4689-108 CP5145-103 CP2889-105 CP5200-124 CP5555-56 CP5555-174 x 4CP5570-810/811/812/813S4 CP4519-CEJ CP2889-105 CP4689-108 CP5145-103 CP2889-105 CP5555-157 CP5555-71 CP5555-174 x 4CP5570-814/815/816/817S4 CP4519-CEJ CP2889-105 CP4689-108 CP5145-103 CP2889-105 CP5200-124 CP5555-56 CP5555-174 x 4CP5575-802/3/4/5S4 / R2 & VG CP4519-CEJ CP2889-105 CP4689-108 CP5145-103 CP2889-105 CP5555-157 CP5555-71 CP5575-106 x 4CP5589-2/3/4/5S4 CP4518-CEJ CP3720-182 CP4689-108 CP3645-111 CP4689-106 CP5589-106 CP5589-6 CP5200-306 x 4CP5610-2/3/4/5S0L CP4518-EG CP3880-2 CP5410-107 CP5610-108 CP4751-104 CP5610-6 CP5610-106 x 4CP5620-2/3S4 CP4509-DD CP3720-173 CP3579-108 CP4890-101 CP3620-8 CP3720-106 x 4CP5687-2/3/4/5S4L CP4518-ACE CP3880-1 CP4380-101 CP4340-106 CP4340-107 CP5870-6 CP6230-111 x 4CP5710-2/3/4/5S0L CP4518-EE CP3880-2 CP5410-107 CP4751-104 CP5610-6 CP5610-106 x 4CP5751-14/15/16/17S0L CP4518-HL CP3720-182 CP5751-145 CP5751-147 CP4751-104 CP5751-28 CP6751-111 x 2 / CP6751-110 x 2CP5751-18/19/20//21S0L CP4518-HL CP3720-182 CP5751-145 CP5751-147 CP5751-109 CP5751-29 CP6751-111 x 2 / CP6751-110 x 2CP5755-4/5S0L CP4518-KL CP3720-182 CP5755-111 CP5755-110 CP5755-108 CP5755-107 x 4CP5756-2S0L CP4518-GG CP3720-182 CP5756-106 CP5755-108 CP5755-107 x 4CP5756-4S0L CP4518-GG CP3720-182 CP5756-106 CP5756-112 CP5755-107 x 4CP5757-2S0L CP4518-GG CP3720-182 CP5755-110 CP5755-108 CP5755-107 x 4CP5761-10/11S0L CP4518-LL CP3720-182 CP5751-145 CP5751-109 CP5751-29 CP6751-111 x 2 / CP6751-110 x 2CP5761-8/9S0L CP4518-LL CP3720-182 CP5751-145 CP4751-104 CP5751-28 CP6751-111 x 2 / CP6751-110 x 2CP5771-10/11/12/13S0L CP4518-LK CP3720-182 CP5771-131 CP5751-145 CP4751-104 CP5751-28 CP6751-111 x 2 / CP6751-110 x 2CP5771-14/15/16/17S0L CP4518-LK CP3720-182 CP5771-131 CP5751-145 CP5751-109 CP5751-29 CP6751-111 x 2 / CP6751-110 x 2CP5780-6/7/8/9S0LP CP4518-JL CP6300-21 CP5990-106 CP5990-107 CP5780-104 x 4 / CP5780-105 x 1 Ctr BeamCP5785-2/3/4/5S0LPD CP4528-HL CP5785-106 CP5785-107 CP5785-113 x 4CP5788-2/3/4/5S0L CP4518-JL CP3880-1 CP4090-111 CP5830-115 CP5788-6 CP5788-106 x 4CP5789-2/3/4/5/S0LP CP4518-JL CP3880-1 CP5990-107 CP5990-106 CP5789-6 CP5789-105 x 4CP5789-2/3/4/5S0MP CP4518-JL CP3880-1 CP5789-107 CP5789-106 CP5789-6 CP5789-105 x 4CP5800-12/13S0L CP4518-DEK CP3720-182 CP5810-113 CP5810-114 CP5810-115 CP5800-107 CP5800-6 CP5800-109 x 4CP5800-2/3/4/5S0L CP4518-DEK CP3720-182 CP5810-113 CP5810-114 CP5810-115 CP5800-107 CP5800-6 CP5800-109 x 4CP5805-2/3/4/5S0L CP4518-EGL CP3720-182 CP4761-111 CP4751-129 CP5751-145 CP4751-104 CP5805-6 CP6751-111 x 2 / CP6751-110 x 2CP5806-2/3S0L CP4518-EGL CP3720-182 CP4761-111 CP4751-129 CP5751-145 CP4751-104 CP5805-6 CP6751-111 x 2 / CP6751-110 x 2CP5810-2/3/4/5S0L CP4518-DEK CP3880-2 CP5810-113 CP5810-114 CP5810-115 CP5810-6 CP5810-105 x 1 / CP5810-104 x 4CP5810-2/3/4/5S0M CP4518-DEK CP3880-2 CP5810-110 CP5810-111 CP5810-112 CP5810-6 CP5810-105 x 1 / CP5810-104 x 4CP5820-2/3/4/5S0L CP4518-EFK CP3880-2 CP5820-109 CP5820-107 CP5820-108 CP5820-6 CP5820-112 x 1 / CP5820-111 x 4CP5820-2/3/4/5S0M CP4518-EFK CP3880-2 CP5820-117 CP5820-119 CP5820-118 CP5820-6 CP5820-112 x 1 / CP5820-111 x 4CP5825-4S0M CP4518-EFK CP3880-2 CP5820-117 CP5820-119 CP5820-118 CP5825-6CP5828-2/3/4/5S7L CP4518-EFK CP3880-2 CP5828-107 CP5828-109 CP5828-108 CP5828-6 CP5828-106 x 1 / CP5828-105 x 4CP5830-12/13/14/15S0L CP4518-DE CP3880-2 CP5830-124 CP5830-123 CP5830-109 CP5830-6 CP5830-108 x 4CP5835-4/5S0 CP4518-LM CP3880-2 CP5835-106 CP5835-107 CP5830-109 CP5830-6 CP5830-108 x 4CP5840-2/3S0 CP4518-GK CP3880-2 CP5840-112 CP5840-111 CP5840-6 CP5840-106 x 4CP5840-4S0 CP4518-GK CP3880-2 CP5840-112 CP5840-111 CP5840-7 CP5840-106 x 4CP5841-2/3/4/5S0 CP4518-CD CP3880-2 CP5841-106 CP5841-107 CP5841-6 CP5840-106 x 4CP5842-2/3/4/5S0M CP4518-EFK CP3880-2 CP5842-106 CP5842-104 CP5842-105 CP5842-6 CP5842-107 x 1 / CP5820-111 x 4CP5842-4/5S0MC CP4518-EFK CP3880-2 CP5842-9 CP5842-8 CP5842-7 CP5842-6 CP5842-107 x 1 / CP5820-111 x 4CP5845-4/5S0MC OR P CP4518-EFK CP3880-2 CP5845-106 CP4845-4107 CP5845-108 CP5845-111 x 4 / CP5845-114 x 1


38

+44 (0)24 7663 9595

BRAKE CALIPERS - Spare PartsCaliper Assemblies Seal Repair

Kit Part No.Bleed Screw

or Kit Part No.Piston 1 Part No.

Piston 2Part No.

Piston 3Part No.



CP5846-4/5S0MC OR P CP4518-EG CP3880-2 CP5846-105 CP5846-106 CP6070-107 x 4 / CP5846-104 x 1CP5850-2/3S0M CP4518-JL CP3880-2 CP5850-107 CP5850-108 CP5850-6 CP5850-106 x 2 / CP5820-111 x 4CP5865-2/3/4/5S7M CP4518-CEJ CP3880-1 CP5870-106 CP5870-104 CP5870-105 CP5870-6 CP6230-111 x 4CP5866-2/3/4/5S7M CP4518-CEJ CP3880-1 CP5870-106 CP5870-104 CP5870-105 CP5866-104 CP5870-6 CP6230-111 x 4CP5870-2/3/4/5S7M CP4518-CEJ CP3880-1 CP5870-106 CP5870-104 CP5870-105 CP5870-6 CP6230-111 x 4CP5880-2/3S0L CP4518-DE CP3880-2 CP5880-104 CP5880-105 CP5880-6 CP5880-106 x 1 / CP5880-107 x 4CP5880-4/5S0M CP4518-DE CP3880-2 CP5880-109 CP5880-108 CP5880-6 CP5880-106 x 1 / CP5880-107 x 4CP5890-2/3S0L CP4518-DEK CP3880-2 CP5890-105 CP5890-108 CP5890-109 CP5890-6 CP5890-104 x 1 / CP5890-106 x 4CP5890-2/3/4/5S0M CP4518-DEK CP3880-2 CP5890-111 CP5890-112 CP5890-113 CP5890-6 CP5890-104 x 1 / CP5890-106 x 4CP5895-4/5S0M CP4518-DEK CP3880-2 CP5890-111 CP5890-112 CP5890-113 CP5895-111 x 4 / CP5895-112 x 1 Ctr BeamCP5928-5E0 CP4518-H CP3880-1 CP5569-111 CP4140-110 CP5586-104CP5971-2/3S7M CP4518-BCE CP3880-1 CP5961-105 CP5961-104 CP5970-114 CP5970-104 CP5970-7 CP4970-104 x 4CP5971-4/5S7M CP4518-BCE CP3880-1 CP5961-105 CP5961-104 CP5970-114 CP5970-104 CP5970-8 CP4970-104 x 4CP6016-2/3S0 CP6016-51 CP3880-1 CP6016-106 CP6016-10CP6030-20/21S0 CP4518-GK CP3720-173 CP6030-107 CP6030-108 CP6030-110 CP6030-35 CP5100-210 x 4CP6030-2/3S0 CP4518-GK CP3720-173 CP6030-107 CP6030-108 CP6030-109 CP6030-6 CP5100-210 x 4CP6040-2/3S7MP CP4518-CEJ CP3880-1 CP6040-108 CP6040-109 CP6040-110 CP5970-104 CP6040-6 CP4970-104 x 4CP6044-2/3S7M CP4518-BDH CP3880-1 CP5962-105 CP5961-104 CP6290-131 CP5970-104 CP6040-6 CP4970-104 x 4CP6050-2/3/4/5S0M CP4518-AEAE CP3720-182 CP6050-105 CP6050-106 CP6050-6 CP6050-108 x 2 / CP6050-109 x 2CP6050-2/3/4/5S7M CP4518-AEAE CP3720-182 CP6050-105 CP6050-106 CP6050-6 CP6050-108 x 2 / CP6050-109 x 2CP6051-2/3/4/5S0L CP4518-AEAE CP3720-173 CP6051-105 CP6051-106 CP6051-6 CP6050-108 x 2 / CP6050-109 x 2CP6055-2/4S7MP CP4518-CEJ CP3880-1 CP6055-110 CP6055-111 CP6055-112 CP6055-6 CP6055-108 x 1 / CP6055-107 x 4CP6055-3/5S7MP CP4518-CEJ CP3880-1 CP6055-110 CP6055-111 CP6055-112 CP6055-7 CP6055-108 x 1 / CP6055-107 x 4CP6056-2/3/4/5S7MP CP4518-CEJ CP3880-1 CP6055-110 CP6055-111 CP6055-112 CP6056-7 CP6056-104 x 1 / CP6055-107 x 4CP6057-2/3/4/5S7MP CP4518-CEJ CP3880-1 CP6055-110 CP6055-111 CP6057-104 CP6056-7 CP6056-104 x 1 / CP6055-107 x 4CP6058-2/3/4/5S7MP CP4518-BEH CP3880-1 CP6057-105 CP6055-111 CP6057-104 CP6056-7 CP6056-104 x 1 / CP6055-107 x 4CP6060-2/3S7MP CP4518-CEJ CP3880-1 CP6060-122 CP6060-120 CP6060-121 CP6060-6 CP6060-106 x 1 / CP6060-107 x 4CP6060-4/5S7MP CP4518-CEJ CP3880-1 CP6060-122 CP6060-120 CP6060-121 CP6060-7 CP6060-106 x 1 / CP6060-107 x 4CP6061-4/5S7MP CP4518-BCE CP3880-1 CP4960-110 CP4960-111 CP6061-104 CP6060-6 CP6060-107 x 4CP6064-2/3S7MP CP4518-CEJ CP3880-1 CP6060-122 CP6060-120 CP6060-121 CP6064-6 CP6060-106 x 1 / CP6060-107 x 4CP6064-4/5S7MP CP4518-CEJ CP3880-1 CP6060-122 CP6060-120 CP6060-121 CP6064-8 CP6060-106 x 1 / CP6060-107 x 4CP6065-10/11S7MP CP4518-CEJ CP3880-1 CP6040-108 CP6065-110 CP6040-110 CP6065-7 CP6065-104 x 1 / CP6060-107 x 4CP6065-2/3S7MP CP4518-CEJ CP3880-1 CP6040-108 CP6040-109 CP6040-110 CP6065-6 CP6065-104 x 1 / CP6060-107 x 4CP6065-4/5S7MP CP4518-CEJ CP3880-1 CP6040-108 CP6065-110 CP6040-110 CP6065-7 CP6065-104 x 1 / CP6060-107 x 4CP6065-8/9S7MP CP4518-CEJ CP3880-1 CP6040-108 CP6040-109 CP6040-110 CP6065-6 CP6065-104 x 1 / CP6060-107 x 4CP6066-4/5S7MP CP4518-BCE CP3880-1 CP6040-108 CP6040-109 CP6060-123 CP6065-7 CP6065-104 x 1 / CP6060-107 x 4CP6070-12/13S7L CP4518-DH CP3880-1 CP6070-120 CP5015-109 CP6070-6 CP6070-106 x 1 / CP6070-107 x 4CP6070-14/15S7L CP4518-DH CP3880-1 CP6070-120 CP5015-109 CP6070-7 CP6070-106 x 1 / CP6070-107 x 4CP6070-2/3/4/5S7MC CP4518-DH CP3880-1 CP6070-110 CP6070-111 CP6070-6 CP6070-106 x 1 / CP6070-107 x 4CP6070-2/3/4/5S7MP CP4518-DH CP3880-1 CP6070-110 CP6070-111 CP6070-6 CP6070-106 x 1 / CP6070-107 x 4CP6071-2/3/4/5S7MP CP4518-DH CP3880-1 CP6070-110 CP6070-111 CP6071-6 CP6070-106 x 1 / CP6070-107 x 4CP6075-2/3S7MC CP4518-CEJ CP3880-1 CP6055-110 CP6055-111 CP6055-112 CP6075-6 CP6075-106 x 1 / CP6075-105 x 4CP6075-4/5S7MC CP4518-CEJ CP3880-1 CP6055-110 CP6055-111 CP6055-112 CP6075-7 CP6075-106 x 1 / CP6075-105 x 4CP6077-4/5S7MP CP4518-BCE CP3880-1 CP6055-110 CP6055-111 CP6057-104 CP6075-105 x 4 / CP6078-104 x 1 Ctr BeamCP6078-4/5S7MP CP4518-CEJ CP3880-1 CP6055-110 CP6055-111 CP6055-112 CP6075-105 x 4 / CP6078-104 x 1 Ctr BeamCP6080-2/3S7MP CP4518-CEJ CP3880-1 CP6060-122 CP6060-120 CP6060-121 CP6460-105 CP6060-6 CP6060-107 x 4 CP6080-4/5S7MP CP4518-CEJ CP3880-1 CP6060-122 CP6060-120 CP6060-121 CP6460-105 CP6060-7 CP6060-107 x 4CP6083-2/3S7M CP4518-CEJ CP3880-1 CP6083-108 CP6083-107 CP6083-106 CP6083-7 CP5856-120 x 4 / CP6066-104 x 1 Ctr BeamCP6085-2/3S7MC CP4518-CEJ CP3880-1 CP6055-110 CP6055-111 CP6055-112 CP6075-6 CP6075-106 x 1 / CP6075-105 x 4CP6085-4/5S7MC CP4518-CEJ CP3880-1 CP6055-110 CP6055-111 CP6055-112 CP6075-7 CP6075-106 x 1 / CP6075-105 x 4CP6086-2/3S7MC CP4518-CEJ CP3880-1 CP6055-110 CP6055-111 CP6055-112 CP6060-107 x 4 / CP6086-104 x 1CP6087-2/3S7MP CP4518-BCE CP3880-1 CP6057-104 CP6055-110 CP6055-111 CP6055-107 x 4 / CP6087-104 x 2CP6088-2/3S7MP CP4518-CEJ CP3880-1 CP6057-110 CP6055-111 CP6055-112 CP6060-107 x 4 / CP6086-104 x 1CP6096-2/3S7MP CP4518-CEJ CP3880-1 CP6060-122 CP6060-120 CP6060-121 CP6096-6 CP6060-107 x 4 / CP6086-104 x 1CP6096-4/5S7MP CP4518-CEJ CP3880-1 CP6060-122 CP6060-120 CP6060-121 CP6096-7 CP6060-107 x 4 / CP6086-104 x 1CP6114-10/11/12/13S0 CP4518-L CP3880-1 CP6114-106 CP5119-144 CP6114-105CP6120-2/3S0 CP4518-L CP3880-1 CP5235-108 CP6120-103 CP6120-6CP6121-2/3S0 CP4518-J CP3880-1 CP6121-104 CP6120-103 CP6120-6CP6136-4/5S0L CP4518-CDH CP3880-1 CP6136-114 CP6136-116 CP6136-110 CP6136-107 CP6136-10 CP6508-102 x 4CP6136-8/9S0L CP4518-CDH CP3880-1 CP6136-114 CP6136-116 CP6136-110 CP6136-107 CP6136-10 CP5555-120 x 4CP6138-2/3S0L CP4518-DEDE CP3880-1 CP6136-114 CP6136-115 CP6136-111 CP6138-106 CP6138-10 CP6508-102 x 4CP6148-2/5R0M CP4518-AEAE CP6148-108 CP6148-109 CP6148-6 CP6148-107 x 2 / CP6148-106 x 2CP6148-3/4R0M CP4518-AEAE CP6148-108 CP6148-109 CP6148-7 CP6148-107 x 2 / CP6148-106 x 2CP6160-2/3S7MP CP4518-CEJ CP3880-1 CP6055-110 CP6055-111 CP6055-112 CP6060-107 x 4 / CP6086-104 x 1 Ctr BeamCP6161-2/3S7MP CP4518-BCE CP3880-1 CP6055-110 CP6055-111 CP6057-104 CP6060-107 x 4 / CP6086-104 x 1 Ctr BeamCP6165-2/3S7M CP8518-CEJ CP3880-1 CP6165-108 CP6165-107 CP6165-106 CP5856-120 x 4 / CP6165-104 x 1 Ctr BeamCP6169-2/3S7MP CP4518-CEJ CP3880-1 CP6169-108 CP4969-139 CP6169-106 CP6169-113 x 4CP6215-10/11/12/13S7L CP4518-CF CP3880-1 CP6260-107 CP5828-108 CP5760-6 CP6215-104 x 1 / CP5760-105 x 4CP6215-2/3/4/5S0L CP4518-DG CP3880-1 CP6215-106 CP6215-105 CP5760-6 CP6215-104 x 1 / CP5760-105 x 4CP6215-6/7/8/9S0L CP4518-DG CP3880-1 CP6215-109 CP6215-110 CP5760-6 CP6215-107 x 2 / CP6215-108 x 2 / CP6215-104 x 1CP6220-2/3/4/5S0 CP4518-CEJ CP3720-182 CP5070-107 CP5070-106 CP5070-105 CP6220-113 CP6220-21 CP6220-110 x 4CP6230-2/3/4/5S7M CP4518-CEJ CP3720-173 CP4970-113 CP4970-112 CP4970-111 CP6230-112 CP6230-21 CP6230-111 x 4CP6238-2/3S0L CP4518-DEDE CP3880-1 CP6136-114 CP6136-115 CP6136-111 CP6238-106 CP6238-10 CP6238-110 x 4CP6240-2/3/4/5S7M CP4518-CEJ CP3720-173 CP4970-113 CP4970-112 CP4970-111 CP6230-112 CP6240-6 CP6230-111 x 4CP6270-2/4S7MP OR C CP4518-DH CP3880-1 CP6070-110 CP6070-111 CP6070-7 CP6070-107 x 4 / CP6270-104 x 1CP6267-6/7S0L CP8518-DG CP3880-1 CP6266-105 CP6266-106 CP5760-105 x 4 / CP6266-104CP6268-12/-13S7L CP8518-EFK CP3880-1 CP6268-104 CP6268-105 CP6268-106 CP6268-111 x 4CP6269 CP8518-EFK CP3880-1 CP6268-104 CP6268-105 CP6268-106 CP6268-20 / -21 Pad Abutment Plates, L = CP6269-102 / T = CP6269-104CP6270-3/5S7MP OR C CP4518-DH CP3880-1 CP6070-110 CP6070-111 CP6070-6 CP6070-107 x 4 / CP6270-104 x 1CP6271-2/3/4/5S7MP CP4518-DH CP3880-1 CP6070-110 CP6070-111 CP6070-6 CP6070-107 x 4 / CP6270-104 x 1CP6320-12/13/14/15R4M CP4518-HL CP3720-177 CP6320-107 CP6320-111 CP6320-106 x 4CP6320-14/15R4 CP4518-HL CP2879-103 CP2279-6 CP6320-111 CP6320-106 x 4CP6320-22/23/24/25S4M CP4518-HL CP3880-1 CP3720-177 CP6320-107 CP6320-111 CP6320-106 x 4CP6320-32/33/34/35S4M CP4518-HL CP3880-1 CP3720-177 CP6320-107 CP6320-111 CP6320-106 x 4CP6340-12/13/14/15R4M CP4518-DH CP6320-108 CP6320-107 CP6320-110 CP6320-106 x 4CP6340-24/25/26/27R4M CP4518-DH CP3880-1 CP6320-108 CP6320-107 CP6320-110 CP6320-106 x 4CP6340-26/27/28/29S4M CP4518-DH CP3880-1 CP6320-108 CP6320-107 CP6320-110 CP6320-106 x 4CP6340-28/29R4M CP4518-DH CP3880-1 CP6320-108 CP6320-107 CP6320-110 CP6320-106 x 4CP6340-2/3/4/5S4M CP4518-DH 3486-229 CP6320-108 CP6320-107 CP6320-110 CP6320-106 x 4CP6350-14/15S7M CP4518-CEJ CP3880-1 CP6350-120 CP6350-119 CP6350-118 CP6350-109 CP6350-12 CP6350-110 x 4CP6350-18/19S7M CP4518-CEJ CP3880-1 CP6350-120 CP6350-119 CP6350-118 CP6350-109 CP6350-12 CP6350-110 x 4CP6350-2/5S7M CP4518-CEJ CP3880-1 CP6350-108 CP6350-107 CP6350-106 CP6350-109 CP6350-12 CP6350-110 x 4CP6350-3/4S7M CP4518-CEJ CP3880-1 CP6350-108 CP6350-107 CP6350-106 CP6350-109 CP6350-13 CP6350-110 x 4CP6350-8/9S7M CP4518-CEJ CP3880-1 CP6350-120 CP6350-119 CP6350-118 CP6350-109 CP6350-12 CP6350-110 x 4CP6360-2/3S7L CP4518-CEJ CP3880-1 CP6360-104 CP4360-127 CP6360-105 CP6360-110 CP6360-7 CP6360-106 x 4CP6360-4/5S7L CP4518-CEJ CP3880-1 CP6360-104 CP4360-127 CP6360-105 CP6360-110 CP6360-6 CP6360-106 x 4CP6361-2/3S7L CP4518-CEJ CP3880-1 CP6360-104 CP4360-127 CP6360-105 CP6360-110 CP6360-7 CP6360-106 x 4CP6361-4/5S7L CP4518-CEJ CP3880-1 CP6360-104 CP4360-127 CP6360-105 CP6360-110 CP6360-6 CP6360-106 x 4CP6382-2/-3S7LP CP8518-BEH CP6300-30 CP6382-201 CP6382-202 CP6382-203 CP6382-207 x 4CP6420-2/3/4/5R4M CP4518-HL CP3720-177 CP6320-107 CP6320-110 CP6320-106 x 4CP6470-2S7MP CP4581-DH CP3880-1 CP6070-110 CP6070-111 CP6470-106 x 4 / CP6470-104 x 1 Ctr Beam CP6470-3S7MP CP4581-DH CP3880-1 CP6070-110 CP6070-111 CP6470-106 x 4 / CP6470-105 x 1 Ctr Beam CP6480-2S7L CP4518-DH CP3880-1 CP6480-104 CP6286-134 CP6480-106 N/A CP6470-106 x 4 CP6480-3S7L CP4518-DH CP3880-1 CP6480-104 CP6286-134 CP6480-107 N/A CP6470-106 x 4CP6520-2/3/4/5R4M CP4518-HL CP3880-1 CP3720-177 CP6320-107 CP6320-111 CP6320-106CP6560-18/19R4L CP4518-CEJ CP3880-1 CP6560-129 CP6560-130 CP6560-131 CP6560-106 x 1 / CP6560-110 x 4CP6560-2/3/4/5S4MP CP4518-CEJ CP3880-1 CP6560-107 CP6560-108 CP6560-109 CP6560-106 x 1 / CP6560-110 x 4CP6561-2/3/4/5S4MP CP4518-CF CP3880-1 CP6561-107 CP6561-108 CP6560-106 x 1 / CP6560-110 x 4CP6564-2/3R4L CP4518-DH CP3880-1 CP6564-108 CP6564-109 CP6560-106 x 1 / CP6560-110 x 4CP6600-26/27/28/29S0 CP4525-JK CP3880-1 CP6200-105(6026) CP6200-104 CP6609-11 CP6200-103 x 4CP6600-2/3/4/5S0 CP4525-JK CP3880-1 CP6200-105(6026) CP6200-104 CP6600-10 CP6200-103 x 4CP6600-2/3/4/5S0R2 CP4525-JK CP3880-1 CP6200-105(6026) CP6200-104 CP6600-10 CP6200-103 x 4CP6600-2/3S0S2 CP4525-JK CP3880-1 CP6200-105(6026) CP6200-104 CP6600-10 CP6200-103 x 4CP6600-6/7/8/9S0 CP4525-JK CP3880-1 CP6200-105(6026) CP6200-104 CP6600-10 CP6200-103 x 4CP6602-2/3/4/5S0 CP4525-DD CP3880-1 CP6606-109(6026) CP6609-11 CP7040-110 x 4

39

www.apracing.com

Caliper Assemblies Seal Repair KitPart No.


Piston 1 Part No.

Piston 2Part No.

Piston 3Part No.



CP6605-12/13S0 CP4525-JK CP3880-1 CP6200-105(6026) CP6200-104 CP6600-10 CP6200-103 x 4CP6608-4/5S0 CP4525-HJ CP3880-1 CP6609-107(6026) CP6200-104 CP6600-10 CP6200-103 x 4CP6609-2/3/4/5S0 CP4525-EH CP3880-1 CP6609-106(6026) CP6609-107(6026) CP6609-10 CP6200-103 x 4CP6609-6/7/8/9S0 & R2 CP4525-EH CP3880-1 CP6609-106(6026) CP6609-107(6026) CP6609-11 CP6200-103 x 4CP6611-4/5S0 CP4525-JJ CP3880-1 CP6200-104 CP6609-11 CP6200-103 x 4CP6611-8/9S0 CP4525-JJ CP3880-1 CP6200-104 CP5200-124 CP6609-11 CP6200-103 x 4CP6617-4/5S0 CP4525-DD CP3880-1 CP6606-109(6026) CP6609-11 CP7040-110 x 4CP6624-2/3/4/5S0 CP4525-DE CP3880-1 CP6606-109(6026) CP6609-106(6026) CP6609-11CP6625-2/3/4/5S0 CP4525-EE CP3880-1 CP6609-106(6026) CP6609-11CP6625-6/7S0 CP4525-EE CP3880-1 CP6609-106(6026) CP6609-11CP6626-2/3S0 CP4525-JK CP3880-1 CP6200-105(6026) CP6200-104 CP6626-10 CP6200-103 x 4CP6627-2/3S0 / CL & R2 CP4525-JJ CP3880-1 CP5118-103(6026) CP6622-10 CP6622-106 x 4CP6628-4/5S0B4 CP4525-JK CP3880-1 CP5118-103 CP6628-107 CP6628-10 CP6622-106 x 4CP6628-6/7S0R2 CP4525-JK CP3880-1 CP5118-103 CP6628-107 CP6600-10 CP6622-106 x 4CP6631-2/3S0 CP4525-JK CP3880-1 CP6200-105(6026) CP6200-104 CP6618-10 CP6200-103 x 4CP6634-2/3S0R2 CP4525-JJ CP3880-1 CP5118-103(6026) CP6622-10 CP6622-106 x 4CP6650-2/3/4/5S7L CP4518-CF CP3880-1 CP6260-107 CP5828-108 CP6261-108 CP6261-6 CP5760-105 x 4CP6665-2/3S4L CP4518-CEJ CP3880-1 CP6265-109 CP6265-108 CP6265-107 CP5760-105 x 4 / Pad Retainer Plate CP6078-106 x 1CP6688-4/5E0M CP4518-FF CP4469-101 CP6688-113CP6720-18/19S4 CP4518-GK CP3880-1 CP3567-108 CP3344-109 CP6720-143 CP5200-306 x 4CP6720-22/23/24/25S4L CP4518-GK CP3880-1 CP3567-116 CP3567-117 CP3394-113 CP5200-306 x 4CP6720-6/7/8/9S4 CP4518-GK CP3880-1 CP3567-108 CP3344-109 CP6720-101 CP5200-306 x 4CP6720-6/7/8/9S4L CP4518-GK CP3880-1 CP3567-116 CP3567-117 CP6720-101 CP5200-306 x 4CP6730-2/3S4 CP4518-EE CP3880-1 CP3349-103 CP6720-101 CP5200-306 x 4CP6740-2/3S4 CP4518-

EE:RALLYCP3880-1 CP6740-109 CP6720-101 CP5200-306 x 4

CP6740-2/3S4L CP3880-1 CP6740-110 CP6720-101 CP5200-306 x 4CP6750-10/11/12/13S4L

CP4518-CEJ:RALLY

CP3880-1 CP6560-126 CP6560-127 CP6560-128 CP6750-113 CP6750-111 x 1 / CP6750-112 x 2 / CP6750-110 x 1CP6750-14/15/16/17S4L CP3880-1 CP6560-126 CP6560-127 CP6560-128 CP6750-113 CP6750-111 x 1 / CP6750-112 x 2 / CP6750-110 x 1CP6750-2/3/4/5S4L CP3880-1 CP6750-106 CP6750-107 CP6750-108 CP6750-109 CP6750-111 x 1 / CP6750-112 x 2 / CP6750-110 x 1CP6750-6/7/8/9S4L CP3880-1 CP6750-106 CP6750-107 CP6750-108 CP6750-113 CP6750-111 x 1 / CP6750-112 x 2 / CP6750-110 x 1CP6751-10/11S0L CP4518-GG CP3720-182 CP4751-129 CP5751-109 CP7751-7 CP6751-111 x 2 / CP6751-110 x 2CP6751-30/31S0L CP4518-GG CP3720-182 CP4751-126 CP4751-104 CP7751-6 CP6751-111 x 2 / CP6751-110 x 2CP6751-8/9S0L CP4518-GG CP3720-182 CP4751-129 CP4751-104 CP7751-6 CP6751-111 x 2 / CP6751-110 x 2CP6760-2/3/4/5S4L CP4518-CF CP3880-1 CP4907-106 CP6760-118 CP4144-101 CP6561-106 x 4CP6761-10/11S0L CP4518-EE CP3720-182 CP4761-111 CP5751-109 CP7751-7 CP6751-111 x 2 / CP6751-110 x 2CP6761-8/9S0L CP4518-EE CP3720-182 CP4761-111 CP4751-104 CP7751-6 CP6751-111 x 2 / CP6751-110 x 2CP6766-2/3S7L CP4518-CEJ:RAID CP3880-1 CP6560-126 CP6560-127 CP6560-128 CP6766-108 x 4 / CP6766-107 x 1 Ctr BeamCP6768-23/S7L CP4518-CEJ:RAID CP3880-1 CP6560-126 CP6560-127 CP6560-128 CP6766-108 x 4 / CP6766-107 x 1 Ctr BeamCP6789-2S0 CP4518-H CP3720-173 CP3177-102 CP5310-21 CP6789-104 x 4CP6789-3S4 CP4518-JJ CP3720-173 CP3215-113 CP5100-116 CP5000-54 CP5100-210 x 2 / CP5100-211 x 2CP6830-4/5S4LP CP4518-GK CP3880-1 CP6820-106 CP6820-107 CP6820-113 x 4 / CP6820-109 x 1 Ctr BeamCP6831-4/5S4LP CP4518-CE CP3880-1 CP6821-104 CP6821-105 CP6820-113 x 4 / CP6820-109 x 1 Ctr BeamCP6840-4/5S4L CP8518-GK CP3880-1 CP6820-106 CP6820-107 CP6820-113 x 4 / CP6820-109x 1 Ctr BeamCP7003-2S0 CP4518-A CP4469-101 CP7003-105 K19865CP7030-2/3S0 CP4518-GK CP3720-173 CP7030-108 CP7030-107 CP7030-6 CP7030-106 x 4CP7030-4/5S0 CP4518-GK CP3720-173 CP7030-108 CP7030-107 CP7030-7 CP7030-106 x 4CP7031-4/5S0LP CP4518-AE CP3880-1 CP7031-113 CP7031-108 CP3307-222 x 4 / CP7031-106 x 1CP7040-16/17/18/19S0 CP4525-CEJ CP3880-1 CP7040-118(6026) CP6609-106(6026) CP6200-104 CP7040-10 CP7040-110 x 4CP7040-2/3/4/5S0 CP4525-CEJ CP3880-1 CP7040-118(6026) CP6609-106(6026) CP6200-104 CP7040-10 CP7040-110 x 4CP7040-2/3/4/5S0R2 CP4525-CEJ CP3880-1 CP7040-118(6026) CP6609-106(6026) CP6200-104 CP7040-10 CP7040-110 x 4CP7041-12/13S0 CP4525-CEJ CP3880-1 CP7040-118(6026) CP6609-106(6026) CP6200-104 CP7040-10 CP7040-110 x 4CP7041-12/13S0R2 CP4525-CEJ CP3880-1 CP7040-118(6026) CP6609-106(6026) CP6200-104 CP7040-10 CP7040-110 x 4CP7060-2/3S0RD CP4525-CEJ CP3880-1 CP4910-141 CP4910-140 CP3344-192 CP7060-10 CP7040-110 x 4CP7060-2/3S4 & RD CP4525-CEJ CP3880-1 CP4910-141 CP4910-140 CP3344-192 CP7060-10 CP7040-110 x 4CP7206-4/5S4 CP4525-JK CP3880-1 CP4090-112 CP5205-101 CP5138-106 CP7206-101 CP6200-103 x 4CP7300-2/3/4/5S0L CP4518-EEE CP3880-1 CP7300-101CP7600-14/15S4 CP4525-JJ CP3880-1 CP2409-124 CP7610-11 CP7605-117 x 4CP7600-2/3/4/5S0 CP4525-JJ CP3880-1 CP6200-104 CP7601-11 CP7605-117 x 4CP7600-4/5S0R2 CP4525-JJ CP3880-1 CP6200-104 CP7601-11 CP7605-117 x 4CP7600-6/7/8/9S0 CP4525-JJ CP3880-1 CP6200-104 CP7601-11 CP7605-117 x 4CP7601-26/27S0B3 CP4525-EE CP3880-1 CP6609-106(6026) CP7601-11 CP7605-117 x 4CP7602-2/3S0 CP4525-EH CP3880-1 CP6609-106(6026) CP6609-107(6026) CP7601-11 CP7605-117 x 4CP7602-6/7S0 CP4525-EH CP3880-1 CP6609-106(6026) CP6609-107(6026) CP7601-11 CP7605-117 x 4CP7605-6/7S0 CP4525-JJ CP3880-1 CP7605-109 CP7605-10 CP7605-116 x 4CP7606-12/13/14/15S0 CP4518-JJ CP3880-1 CP7605-109 CP7606-10 CP7605-116 x 4CP7606-18/19S0 CP4518-JJ CP3880-1 CP7605-109 CP7606-16 CP7605-116 x 4CP7607-12/13S0 CP4525-CC CP3880-1 CP7040-118(6026) CP7610-11 CP7605-117 x 4CP7607-22/23/24/25S0&S2 CP4525-CC CP3880-1 CP7040-118(6026) CP7607-11 CP7605-117 x 4CP7607-24/25S0R2 CP4525-CC CP3880-1 CP7040-118(6026) CP7607-11 CP7605-117 x 4CP7607-2/3/4/5S0 / S2 & R2 CP4525-CC CP3880-1 CP7040-118(6026) CP7601-11 CP7605-117 x 4CP7609-2/3/4/5S0 CP4525-EE CP3880-1 CP6609-106(6026) CP7601-11 CP7605-117 x 4CP7609-2/3/4/5S0R2 & RD CP4525-EE CP3880-1 CP6609-106(6026) CP7601-11 CP7605-117 x 4CP7610-2/3S0 CP4525-CD CP3880-1 CP7040-118(6026) CP6606-109(6026) CP7610-11 CP7605-117 x 4CP7611-4/5S0CL CP4525-EE CP3880-1 CP6609-106(6026) CP7601-11 CP7605-117 x 4CP7611-4/5/6/7S0R2 CP4525-EE CP3880-1 CP6609-106(6026) CP7601-11 CP7605-117 x 4CP7613-2/3/4/5S0 CP4518-EE CP3880-1 CP7613-106 CP7606-10 CP7605-116 x 4CP7613-6/7/8/9S0 CP4518-EE CP3880-1 CP7613-106 CP7613-10 CP7605-116 x 4CP7614-4/5S0 CP4525-EE CP3880-1 CP7613-106 CP7614-6 CP7605-117 x 4CP7615-2/3/4/5S0 & R2 CP4525-CC CP3880-1 CP7040-118(6026) CP7601-11 CP7605-117 x 4CP7618-4/5S0 / R2 & VG CP4525-CC CP3880-1 CP7040-118(6026) CP7601-11 CP7605-117 x 4CP7619-2/3S0R2 CP4525-DD CP3880-1 CP6606-109(6026) CP7601-11 CP7605-117 x 4CP7621-2/3S0 & R2 CP4525-EE CP3880-1 CP6609-106(6026) CP7610-11 CP7605-117 x 4CP7622-4/5S0 CP4525-EE CP3880-1 CP6609-106(6026) CP7622-10 CP7605-117 x 4CP7624-2/3S0 CP4525-EH CP3880-1 CP6609-106(6026) CP6609-107(6026) CP7610-11 CP7605-117 x 4CP7624-6/7S0R2 CP4525-EH CP3880-1 CP6609-106(6026) CP6609-107(6026) CP7601-11 CP7605-117 x 4CP7625-2/3S0 & R2 CP4525-CC CP3880-1 CP7040-118(6026) CP7601-11 CP7605-117 x 4CP7626-2/3S0R2 CP4525-CC CP3880-1 CP7626-107 CP7626-10 CP7605-117 x 4CP7633-4/5S0 CP4525-CC CP3880-1 CP7040-118(6026) CP7601-11 CP7605-117 x 4CP7751-14/15S0L CP4518-LM CP3720-182 CP5751-145 CP5751-147 CP4751-104 CP7751-6 CP6751-111 x 2 / CP6751-110 x 2CP7751-30/31S0L CP4518-LM CP3720-182 CP5751-131 CP5751-130 CP4751-104 CP7751-6 CP6751-111 x 2 / CP6751-110 x 2CP7853-2/3E0 CP4518-EH CP4469-101 CP4488-107 CP4488-106CP8240-2/3S0L CP4518-GG CP3720-182 CP4751-129 CP5830-109 CP7751-6 CP8250-108 x 2 / -109 x 2CP8240-4/5S0L CP4518-GG CP3720-182 CP4751-129 CP5830-109 CP7751-7 CP8250-108 x 2 / -109 x 2CP8241-2/3S0L CP4518-EE CP3720-182 CP4761-111 CP5830-109 CP7751-6 CP8250-108 x 2 / -109 x 2CP8241-4/5S0L CP4518-EE CP3720-182 CP4761-111 CP5830-109 CP7751-7 CP8250-108 x 2 / -109 x 2CP8250-2/3S0L CP4518-LM CP3720-182 CP5751-145 CP5751-147 CP5830-109 CP7751-6 CP5820-108 x 2 / -109 x 2CP8310-2/3/4/5S0BK CP4525-CEJ CP3880-1 CP7040-118 CP6609-106 CP6200-104 CP8310-110 CP8310-10 CP8310-114 x 2 / -115 x 2CP8315-2/3/4/5S0BK CP4518-CEJ CP3880-1 CP7040-118ST CP6609-106ST CP6200-104ST CP8310-116 CP8310-11 CP8310-115 x 2 / CP8310-114 x 2CP8316-2/3/4/5S0R2 CP4525-HJK CP3880-1 CP6200-104 CP6200-105 CP6609-107 CP8310-110 CP8310-10 CP8310-115 x 2 / CP8310-114 x 2CP8317-2/3/4/5S0R2 CP4525-EHJ CP3880-1 CP6609-106 CP6200-104 CP6609-107 CP8310-110 CP8310-10 CP8310-115 x 2 / CP8310-114 x 2CP8350-12/13/14/15S4 CP4518-JK CP3880-1 CP3215-113 CP4270-3 CP8350-108 CP8350-6 CP8250-108 x 2 / CP8250-109 x 2CP8351-2/3/4/5S0L CP4518-LM CP3880-1 CP5751-148 CP5751-149 CP8350-108 CP8350-6 CP8250-108 x 2 / CP8250-109 x 2CP8352-4/5S0L CP4518-KL CP3880-1 CP8350-119 CP8352-106 CP8350-108 CP8350-6 CP8250-108 x 2 / CP8250-109 x 2CP8520-2/3/4/5S0BK & R2 CP4527-EHK CP3880-1 CP8336-116 CP8520-107 CP8335-111 CP8335-116 CP8520-2 & -4 = CP8520-10 / CP8520-3 & -5 = CP8520-11CP8521-2/3/4/5S0BK & R2 CP4527-EEK CP3880-1 CP8336-116 x 4 CP8335-111 CP8335-116 CP8520-2 & -4 = CP8520-10 / CP8520-3 & -5 = CP8520-11CP8522-2/3/4/5S0BK & R2 CP4527-CEJ CP3880-1 CP7555-106 CP8336-116 CP8335-110 CP8335-116 CP8520-2 & -4 = CP8520-10 / CP8520-3 & -5 = CP8520-11CP8530-2/3/4/5S0BK & R2 CP4527-JK CP3880-1 CP8335-110 CP8335-111 CP8335-116 CP8530-2 & -4 = CP8540-10 / CP8530-3 & -5 = CP8540-11CP8540-2/3/4/5S0BK & R2 CP4527-DE CP3880-1 CP8336-111 CP8336-116 CP8335-116 CP8540-2 & -4 = CP8540-10 / CP8540-3 & -5 = CP8540-11CP8540-6/7/8/9S0BK & R2 CP4527-DE CP3880-1 CP8336-111 CP8336-116 CP8335-116 CP8540-6 & -8 = CP8540-10 / CP8540-7 & -9 = CP8540-11CP8560-2/3/4/5S0BK & R2 CP4527-CC CP3880-1 CP7555-106 x 4 CP8560-2 & -4 = CP8540-10 / CP8560-3 & -5 = CP8540-11CP9040-2/3/4/5S0BG & R2 CP4527-CEJ CP3880-1 CP9040-109 CP6696-124 CP6695-124 CP5555-157 CP9040-10CP9440-2/3S4L CP8518-HK CP3880-1 CP9440-106 CP9440-107 CP9440-110 CP9440-108 (RH) / CP9440-109 (LH)CP9660-2/3S4L CP8518-CEJ CP3880-1 CP9660-114 CP9660-115 CP9660-116 CP9660-113 CP9660-110 (RH) / CP9660-111 (LH)CP9665-2/3S7L CP8518-CEJ CP3880-1 CP9660-114 CP9660-115 CP9660-116 CP9660-113 CP9660-110 (RH) / CP9660-111 (LH)


Documents

BRAKE CALIPERS - · PDF fileBRAKE CALIPERS - General Information CALIPER HANDING. ... A brake caliper designed for competition use must be lightweight yet ca