ABSOLUTE Digimatic Calipers Pages 168 to 176 ABSOLUTE Digimatic Carbon Fibre Caliper ... · ABSOLUTE Digimatic Calipers Pages 168 to 176 ABSOLUTE Digimatic Carbon Fibre Caliper Pages

Calipers

ABSOLUTE Digimatic CalipersPages 168 to 176

ABSOLUTE Digimatic Carbon Fibre CaliperPages 177 to 181

Vernier CalipersPages 182 to 186

Dial CalipersPages 187 to 189

Special Purpose CalipersPages 190 to 219

Depth GaugesPages 220 to 230

166 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.

Ingress Protection (IP) Ratings

IP - Protection against solid objects and dust1x - Particles > 50.0 mm2x - Particles > 12.0 mm3x - Particles > 2.5 mm4x - Particles > 1.0 mm5x - Dust residue6x - Dust intrusion

IP - Protection against waterx1 - Dripping waterx2 - Spray water at 15°x3 - Spray water at 60°x4 - Spray water from all directionsx5 - Low pressure water jetsx6 - Floodingx7 - Immersion (15-100 cm)x8 - Complete immersion (depth of immersion 1 m)

Conventional Digital Measurement

ABSOLUTE Digimatic MeasurementAbsolutely safe, absolutely ingenious: The

ABSOLUTE systemAll Mitutoyo measuring instruments with this logo

incorporate the ingenious ABSOLUTE measurement system.

An ABSOLUTE scale only needs to be have the origin position set once, which then holds for all future measurements, no matter how often the instrument is switched off.Incremental measurements can be made at any time without losing the origin setting.

The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact Mitutoyo for more information on delivery times.

167

ABSOLUTE Digimatic Caliper IP67

Series 500

• Designed for use in challenging work environments.• Extremely resistant to coolants and lubricants.• Available with or without data output.

500-706-11

Metric Without thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-706-11 0-150 mm flat 233 40 21 16.5 16 164 155.00500-709-11 0-150 mm Ø 1,9 mm 233 40 21 16.5 16 164 155.00500-716-11 0-150 mm flat 233 40 21 16.5 16 164 199.00500-720-11 0-150 mm Ø 1,9 mm 233 40 21 16.5 16 164 219.00500-707-11 0-200 mm flat 290 50 24.5 20 16 194 220.00500-717-11 0-200 mm flat 290 50 24.5 20 16 194 252.00500-708-11 0-300 mm flat 404 64 27.5 21.8 20 345 305.00500-718-11 0-300 mm flat 404 64 27.5 21.8 20 345 359.00

Metric With thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-702-10 0-150 mm flat 233 40 21 16.5 16 164 170.00500-712-10 0-150 mm flat 233 40 21 16.5 16 164 219.00500-719-10* 0-150 mm Ø 1,9 mm 233 40 21 16.5 16 164 219.00500-703-10* 0-200 mm flat 290 50 24.5 20 16 194 242.00500-713-10 0-200 mm flat 290 50 24.5 20 16 194 277.00500-704-10 0-300 mm flat 404 64 27.5 21.8 20 345 335.00500-714-10* 0-300 mm flat 404 64 27.5 21.8 20 345 395.00

Inch/Metric With thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-752-10 0-150 mm/0-6" flat 233 40 21 16.5 16 164 170.00500-768-10* 0-150 mm/0-6" Ø 0.075" 233 40 21 16.5 16 164 170.00500-762-10 0-150 mm/0-6" flat 233 40 21 16.5 16 164 219.00500-769-10* 0-150 mm/0-6" Ø 0.075" 233 40 21 16.5 16 164 219.00500-753-10 0-200 mm/0-8" flat 290 50 24.5 20 16 194 242.00500-763-10 0-200 mm/0-8" flat 290 50 24.5 20 16 194 277.00500-754-10 0-300 mm/0-12" flat 404 64 27.5 21.8 20 345 335.00500-764-10 0-300 mm/0-12" flat 404 64 27.5 21.8 20 345 395.00

Functions Series 500ORIGIN (ABS-Zero)Auto power off after 20 min. in non useLow voltage alarm

Specifications

Accuracy � 200 mm/8" : ±0,02 mm/0.001"> 200 mm/8" : ±0,03 mm/0.0015"(excluding quantizing error)

Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mm (150,

200 mm) 10,2 mm (300 mm)Repeatability 0,01 mmMax. slider speed UnlimitedBattery life approx. 15.000 hours (150 mm ,200

mm)5.000 hours (300 mm)

Delivered In a case, including 1 battery

Optional accessories

No. Description Price €05CZA624 Digimatic cable with data

switch (1 m)68.00

05CZA625 Digimatic cable with data switch (2 m)

77.00

02AZD790A Connecting cable U-Wave with data switch

92.00

06ADV380A USB Input Tool Direct cable (2 m)

110.00

050083-10 75 mm base for depth measurementfor models up to 200 mm

43.00


48.50

050085-10 125 mm base for depth measurementfor 300 mm models

55.00

Consumable spares

No. Description Price €938882 Battery SR44 5.00

Beam 150 and 200 mm or 300 mm

050083-10


ABSOLUTE Digimatic Carbide Caliper IP67Functions Series 500ORIGIN (ABS-Zero)Auto power off after 20 min. in non useLow voltage alarm

Specifications


Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character height 7,5 mmRepeatability 0,01 mmMax. slider speed UnlimitedBattery life approx. 15.000 hoursDepth bar FlatDelivered In a case, including 1 battery



switch (1 m)68.00


77.00


92.00


110.00


43.00


48.50


55.00

Consumable spares


Carbide-tipped jaws

Series 500

Carbide-tipped jaws• Designed for use in challenging work environments.• Extremely wear-resistant jaws. Extremely resistant to coolants and

lubricants.• Available with or without data output.

Metric Carbide-tipped jaws for outside measurementNo. Range Data output Thumb roller L mm a mm b mm c mm d mm Mass g Price €500-721-10* 0-150 mm 233 40 21 16.5 16 168 320.00500-722-10* 0-200 mm 290 50 24.5 20 16 198 360.00

Metric Carbide-tipped jaws for outside/inside measurementNo. Range Data output Thumb roller L mm a mm b mm c mm d mm Mass g Price €500-727-11 0-150 mm 233 40 21 16.5 16 164 385.00500-723-10* 0-150 mm 233 40 21 16.5 16 168 415.00500-728-11 0-200 mm 290 50 24.5 20 16 194 440.00500-724-10* 0-200 mm 290 50 24.5 20 16 198 470.00

Inch/Metric Carbide-tipped jaws for outside measurementNo. Range Data output Thumb roller L mm a mm b mm c mm d mm Mass g Price €500-731-10* 0-150 mm/0-6" 233 40 21 16.5 16 168 290.00500-735-10 0-150 mm/0-6" 233 40 21 16.5 16 168 320.00500-732-10* 0-200 mm/0-8" 290 50 24.5 20 16 198 330.00500-736-10 0-200 mm/0-8" 290 50 24.5 20 16 198 360.00

Inch/Metric Carbide-tipped jaws for outside/inside measurementNo. Range Data output Thumb roller L mm a mm b mm c mm d mm Mass g Price €500-733-10* 0-150 mm/0-6" 233 40 21 16.5 16 168 385.00500-737-10 0-150 mm/0-6" 233 40 21 16.5 16 168 415.00500-734-10* 0-200 mm/0-8" 290 50 24.5 20 16 198 440.00500-738-10 0-200 mm/0-8" 290 50 24.5 20 16 198 470.00


169

ABSOLUTE Digimatic Caliper

Series 500

• Standard model.• High quality guide surface finish for smooth slider movement.• Large Character Height.• Long Battery Life.

Metric Without thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-180-20* 0-100 mm Ø 1,9 mm 182 40 21 16.5 16 142 180.00500-201-21 0-100 mm Ø 1,9 mm 182 40 21 16.5 16 143 190.00500-184-20 0-150 mm Ø 1,9 mm 233 40 21 16.5 16 164 105.00500-203-21 0-150 mm Ø 1,9 mm 233 40 21 16.5 16 168 132.00500-181-20 0-150 mm flat 233 40 21 16.5 16 164 105.00500-161-20 0-150 mm flat 233 40 21 16.5 16 164 132.00500-182-20 0-200 mm flat 290 50 24.5 20 16 194 162.00500-162-20 0-200 mm flat 290 50 24.5 20 16 194 188.00500-205 0-300 mm flat 404 64 27.5 22 20 350 349.00

Metric With thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-150-20 0-100 mm Ø 1,9 mm 182 40 21 16.5 16 143 209.00500-151-20 0-150 mm flat 233 40 21 16.5 16 164 145.00500-158-20 0-150 mm Ø 1,9 mm 233 40 21 16.5 16 164 145.00500-152-20 0-200 mm flat 290 50 24.5 20 16 194 206.00500-153 0-300 mm flat 404 64 27.5 22 20 350 383.00

Inch/Metric Without thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-191-20 0-150 mm/0-6" flat 233 40 21 16.5 16 168 105.00500-202-21 0-150 mm/0-6" flat 233 40 21 16.5 16 168 145.00500-204-21 0-200 mm/0-8" flat 290 50 24.5 20 16 198 206.00

Inch/Metric With thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-195-20* 0-100 mm/0-4" Ø 0.075" 182 40 21 16.5 16 137 199.00500-170-20 0-100 mm/0-4" Ø 0.075" 182 40 21 16.5 16 143 209.00500-196-20 0-150 mm/0-6" flat 233 40 21 16.5 16 168 115.00500-171-20 0-150 mm/0-6" flat 233 40 21 16.5 16 168 155.00500-178-20* 0-150 mm/0-6" Ø 0.075" 233 40 21 16.5 16 168 155.00500-197-20 0-200 mm/0-8" flat 290 50 24.5 20 16 198 178.00500-172-20 0-200 mm/0-8" flat 290 50 24.5 20 16 198 216.00500-193 0-300 mm/0-12" flat 404 64 27.5 22 20 350 349.00500-173 0-300 mm/0-12" flat 404 64 27.5 22 20 350 383.00

Functions Series 500ORIGIN (ABS-Zero)ZERO/ABSON/OFFLow voltage alarm

Specifications


Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 9 mmRepeatability 0,01 mmMax. slider speed UnlimitedBattery life approx. 20.000 hoursDelivered In a case, including 1 battery


No. Description Price €959143 Data-hold unit 24.00959149 Digimatic cable with data

switch (1 m)36.50

959150 Digimatic cable with data switch (2 m)

42.00

06ADV380C USB Input tool Direct cable with data switch (2 m)

97.00

02AZD790C U-WAVE Data Cable with data switch

87.00


43.00


48.50


55.00

Consumable spares


Round depth bar type

050083-10


ABSOLUTE Digimatic Carbide CaliperFunctions Series 500ORIGIN (ABS-Zero)ZERO/ABSON/OFFLow voltage alarm

Specifications


Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 9 mmRepeatability 0,01 mmMax. slider speed UnlimitedBattery life approx. 20.000 hoursDepth bar FlatDelivered In a case, including 1 battery



switch (1 m)36.50


42.00


97.00


87.00


43.00


48.50


55.00

Consumable spares


Carbide-tipped jaws

050083-10

Series 500

Carbide-tipped jaws• Standard model.• High quality guide surface finish for smooth slider movement.• Large Character Height.• Long Battery Life.• Available with or without data output.

Metric Carbide-tipped jaws for outside measurementNo. Range Data output Thumb roller L mm a mm b mm c mm d mm Mass g Price €500-233-21 0-150 mm 233 40 21 16.5 16 168 220.00500-154-20 0-150 mm 233 40 21 16.5 16 168 250.00500-235-21 0-200 mm 290 50 24.5 20 16 198 260.00500-156-20 0-200 mm 290 50 24.5 20 16 198 290.00

Metric Carbide-tipped jaws for outside/inside measurementNo. Range Data output Thumb roller L mm a mm b mm c mm d mm Mass g Price €500-155-20 0-150 mm 233 40 21 16.5 16 168 405.00500-157-20 0-200 mm 290 50 24.5 20 16 198 460.00

Inch/Metric Carbide-tipped jaws for outside measurementNo. Range Data output Thumb roller L mm a mm b mm c mm d mm Mass g Price €500-159-20* 0-150 mm/0-6" 233 40 21 16.5 16 168 220.00500-174-20 0-150 mm/0-6" 233 40 21 16.5 16 168 250.00500-163-20* 0-200 mm/0-8" 290 50 24.5 20 16 198 260.00500-176-20* 0-200 mm/0-8" 290 50 24.5 20 16 198 290.00500-165* 0-300 mm/0-12" 404 64 27.5 22 20 350 520.00500-167* 0-300 mm/0-12" 404 64 27.5 22 20 350 550.00

Inch/Metric Carbide-tipped jaws for outside/inside measurementNo. Range Data output Thumb roller L mm a mm b mm c mm d mm Mass g Price €500-160-20 0-150 mm/0-6" 233 40 21 16.5 16 168 375.00500-175-20 0-150 mm/0-6" 233 40 21 16.5 16 168 405.00500-164-20* 0-200 mm/0-8" 290 50 24.5 20 16 198 430.00500-177-20* 0-200 mm/0-8" 290 50 24.5 20 16 198 460.00500-166 0-300 mm/0-12" 404 64 27.5 22 20 350 770.00500-168* 0-300 mm/0-12" 404 64 27.5 22 20 350 800.00


171

ABSOLUTE Digimatic Solar Caliper IP67

Series 500

• Solar powered, eco-friendly SuperCaliper needs no battery.• Operates in only 60 lux ambient lighting.• Available with or without data output.• Even if the illuminance is temporally less than 60 LUX measuring

can be performed by charging a super capacitor.

500-772

Metric Without thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-772 0-150 mm flat 233 21 16.5 40 16 180 180.00500-792 0-150 mm Ø 1,9 mm 233 21 16.5 40 16 180 180.00500-778 0-150 mm flat 233 21 16.5 40 16 180 235.00500-773 0-200 mm flat 290 24.5 20 50 16 210 258.00500-779 0-200 mm flat 290 24.5 20 50 16 210 296.00

Metric With thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-774 0-150 mm flat 233 21 16.5 40 16 180 198.00500-776* 0-150 mm flat 233 21 16.5 40 16 180 259.00500-775* 0-200 mm flat 290 24.5 20 50 16 210 284.00500-777* 0-200 mm flat 290 24.5 20 50 16 210 326.00

Inch/Metric With thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm d mm Mass g Price €500-784 0-150 mm/0-6" flat 233 21 16.5 40 16 180 198.00500-786 0-150 mm/0-6" flat 233 21 16.5 40 16 180 259.00500-785* 0-200 mm/0-8" flat 290 24.5 20 50 16 210 284.00500-787* 0-200 mm/0-8" flat 290 24.5 20 50 16 210 326.00

Functions Series 500ORIGIN (ABS-Zero)

Specifications

Accuracy ±0,02 mm/0.001"(excluding quantizing error)

Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD; Character Height 7,5 mmRepeatability 0,01 mmMax. slider speed UnlimitedPower Solar cellDelivered In a case


No. Description Price €050083-10 75 mm base for depth

measurementfor models up to 200 mm

43.00


48.50


92.00


110.00


68.00


77.00

050083-10


ABSOLUTE Digimatic Solar CaliperFunctions Series 500ORIGIN (ABS-Zero)

Specifications

Accuracy ±0,02 mm/0.001"(excluding quantizing error)

Digital step 0,01 mm/0.0005"Display LCD; Character Height 7,5 mmRepeatability 0,01 mmMax. slider speed UnlimitedPower Solar cellDelivered In a case



switch (1 m)36.50


42.00


43.00


48.50


97.00


87.00

050083-10

Series 500

• Solar cell enables operation in only 60 lux ambient lighting.• Available with or without data output.

500-444

500-457

Metric Without thumb rollerNo. Range Depth bar L mm a mm b mm c mm Mass g Price €500-457 0-150 mm flat 233 40 21 16.5 150 135.00500-458 0-200 mm flat 290 50 24 20 180 180.00

Metric With thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm Mass g Price €500-453* 0-100 mm Ø 1,9 mm 182 40 21 16.5 125 210.00500-443 0-100 mm Ø 1,9 mm 182 40 21 16.5 145 220.00500-454* 0-150 mm flat 233 40 21 16.5 150 180.00500-444 0-150 mm flat 233 40 21 16.5 170 190.00500-455* 0-200 mm flat 290 50 24 20 180 220.00500-445 0-200 mm flat 290 50 24 20 200 230.00

Inch/Metric With thumb rollerNo. Range Depth bar Data output L mm a mm b mm c mm Mass g Price €500-473* 0-100 mm/0-4" Ø 0.075" 182 40 21 16.5 125 210.00500-463* 0-100 mm/0-4" Ø 0.075" 182 40 21 16.5 145 220.00500-474* 0-150 mm/0-6" flat 233 40 21 16.5 150 180.00500-464* 0-150 mm/0-6" flat 233 40 21 16.5 170 190.00500-475* 0-200 mm/0-8" flat 290 50 24 20 180 220.00500-465* 0-200 mm/0-8" flat 290 50 24 20 200 230.00


173

ABSOLUTE Digimatic High Capacity Caliper

Series 500

• Robust design for large measuring ranges.• SPC data output.

500-500-10

Metric

No. Range L mm a mm b mm c mm d mm Mass g Price €500-500-10 0-450 mm 630 90 47 38 25 1,170 765.00500-501-10 0-600 mm 780 90 47 38 25 1,350 830.00500-502-10 0-1000 mm 1,240 130 61 50 32 3,300 1,440.00

Inch/Metric

No. Range L mm a mm b mm c mm d mm Mass g Price €500-505-10 0-450 mm/0-18" 630 90 47 38 25 1,170 765.00500-506-10 0-600 mm/0-24" 780 90 47 38 25 1,350 830.00500-507-10 0-1000 mm/0-40" 1,240 130 61 50 32 3,700 1,440.00

Functions Series 500Data outputORIGIN (ABS-Zero)ZERO/ABSON/OFFLow voltage alarm

Specifications

Accuracy � 600 mm/24" : ±0,05 mm/0.002"� 1000 mm/40" : ±0,07 mm/0.003"(excluding quantizing error)

Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD; Character Height 10 mmRepeatability 0,01 mmMax. slider speed UnlimitedBattery life approx. 20.000 hoursDelivered In a case, including 1 battery


No. Description Price €959149 Digimatic cable with data

switch (1 m)36.50

959143 Data-hold unit 24.00959150 Digimatic cable with data

switch (2 m)42.00


97.00


87.00

Consumable spares



ABSOLUTE Digimatic Caliper with Nib Style Jaws Series 550

Functions 550-

203-

10up

to55

0-22

7-10

550-

301-

1055

0-31

1-10

550-

331-

1055

0-34

1-10

Data outputORIGIN (ABS-Zero)ZERO/ABSOFFSET*PRESETON/OFFAuto power off after 20 min. in non useLow voltage alarm

Specifications

Accuracy Refer to the list of specifications(excluding quantizing error)

Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mm (200 mm)

10,2 mm (300 mm)10 mm (>300 mm)

Max. slider speed

Unlimited

Battery life approx. 3 years (200 mm), 1 year (300 mm), 3,5 years (>300 mm)




switch (1 m)36.50


42.00


87.00


97.00

Optional accessories for IP67

No. Description Price €02AZD790A Connecting cable U-Wave

with data switch92.00


68.00


77.00


110.00

Consumable spares


*10 mm/0.4"

Series 550

• With rounded measuring surfaces for the measurement of inside dimensions.• SPC data output.

200/300 mm

550-301-10

Metric IP67No. Range Inside measuring from Accuracy L mm a mm b mm c mm Mass g Price €550-301-10 0-200 mm 10 mm ±0,03 mm 290 60 8 16 180 320.00550-331-10 0-300 mm 10 mm ±0,04 mm 403 75 12 20 380 385.00

Metric

No. Range Inside measuring from Accuracy L mm a mm b mm c mm Mass g Price €550-203-10 0-450 mm 20 mm ±0,05 mm 630 100 18 25 1,110 570.00550-205-10 0-600 mm 20 mm ±0,05 mm 780 100 18 25 1,290 645.00550-207-10 0-1000 mm 20 mm ±0,07 mm 1,240 140 24 32 3,350 1,100.00

Inch/Metric IP67

No. RangeInside measuring

fromAccuracy L mm a mm b mm c mm Mass g Price €

550-311-10 0-200 mm/0-8" 10,16 mm/0.4" ±0,03 mm/0.0015" 290 60 8 16 180 320.00

550-341-100-300 mm/

0-12"10,16 mm/0.4" ±0,04 mm/0.002" 403 75 12 20 380 385.00

Inch/Metric


fromAccuracy L mm a mm b mm c mm Mass g Price €

550-223-10 0-450 mm/0-18" 12,7 mm/0.5" ±0,05 mm/0.002" 630 100 18 25 1,110 570.00550-225-10 0-600 mm/0-24" 12,7 mm/0.5" ±0,05 mm/0.002" 780 100 18 25 1,290 645.00

550-227-100-1000 mm/

0-40"25,4 mm/1" ±0,07 mm/0.003" 1,240 140 24 32 3,350 1,100.00

Rounded outside measuring surfaces formeasuring inside dimensions


175

ABSOLUTE Digimatic Caliper with Nib Style and Standard Jaws

Series 551

• With knife-shaped measuring surfaces for outside measurement and with roun-ded measuring surfaces for the measurement of inside dimensions.

• SPC data output.

200/300 mm

551-301-10

Metric IP67No. Range Inside measuring from Accuracy L mm a mm b mm c mm d mm Mass g Price €551-301-10 0-200 mm 10 mm ±0,03 mm 290 60 8 30 16 196 345.00551-331-10 0-300 mm 10 mm ±0,04 mm 403 90 10 40 20 420 385.00

Metric

No. Range Inside measuring from Accuracy L mm a mm b mm c mm d mm Mass g Price €551-204-10 0-500 mm 20 mm ±0,06 mm 680 150 18 56 25 1,060 720.00551-206-10 0-750 mm 20 mm ±0,06 mm 963 150 18 56 25 1,410 990.00551-207-10 0-1000 mm 20 mm ±0,07 mm 1,230 150 20 56 32 3,430 1,200.00

Inch/Metric IP67

No. RangeInside measur-

ing fromAccuracy L mm a mm b mm c mm d mm Mass g Price €

551-311-10*0-200 mm/

0-8"10,16 mm/0.4"

±0,03 mm/0.0015"

290 60 8 30 16 196 345.00

551-341-10*0-300 mm/

0-12"10,16 mm/0.4"

±0,04 mm/0.002"

403 90 10 40 20 420 385.00

Inch/Metric


ing fromAccuracy L mm a mm b mm c mm d mm Mass g Price €

551-224-100-500 mm/

0-20"12,7 mm/0.5"

±0,06 mm/0.0025"

680 150 18 56 25 1,060 720.00

551-226-10*0-750 mm/

0-30"12,7 mm/0.5"

±0,06 mm/0.0025"

963 150 18 56 25 1,410 990.00

551-227-10*0-1000 mm/

0-40"25,4 mm/1"

±0,07 mm/0.003"

1,230 150 20 56 32 3,430 1,200.00

Round surface of jaws formeasuring inside dimensions

Series 551

Functions 551-

204-

10up

to55

1-22

7-10

551-

301-

1055

1-31

1-10

551-

331-

1055

1-34

1-10

Data outputORIGIN (ABS-Zero)ZERO/ABSOFFSET*PRESETON/OFFAuto power off after 20 min. in non useLow voltage alarm

Specifications


Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD; Character Height 7.5 mm (200

mm) 10,2 mm (300 mm) 10 mm (>300 mm)

Max. slider speed

Unlimited

Battery life approx. 3 years (200 mm), 1 years (300 mm), 3,5 years (>300 mm)




switch (1 m)36.50


42.00


87.00


97.00

Optional accessories for IP67




68.00


77.00


110.00

Consumable spares


*10 mm/ 0.4"


ABSOLUTE Digimatic Carbon Fibre Caliper IP66Functions Series 552Data outputORIGIN (ABS-Zero)ZERO/ABSOFFSET*PRESETAuto power off after 20 min. in non useDATA/HOLDLow voltage alarm

Specifications


Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD; Character Height 10 mmMax. slider speed UnlimitedBattery life approx. 5.000 hoursDelivered In a case, including 1 battery



switch (1 m)68.00


77.00

914055 Pair of jaws for measuring hole centre-to-centre dimensions (over 10 mm)

210.00

914057 Pair of jaws for measuring inside groove diameter (over 50 mm)

240.00

914053 Holders for special measurement jaws up to a measuring range of 600 mm

160.00


165.00


110.00


92.00

Consumable spares


Optional accessories for Inch

No. Description Price €914056 Pair of jaws for measuring

hole centre-to-centre dimensions (over 0.4")

210.00

914058 Pair of jaws for measuring inside groove diameter (over 2")

240.00

* Metric Inch/Metric

� 600 mm 20 mm 0.5"

� 1000 mm 20 mm 1"

Series 552

Standard model with steel jaws• The ultra-lightweight design (with carbon fibre reinforced material) reduces total

weight by up to 50%.• Direct readout of inside measurements from the LCD (Offset value can be set easi-

ly by using the Offset button).• Preset function for setting a desired starting point.• SPC data output.

552-304-10

Metric

No. RangeInside

measur-ing from

Accuracy L mm a mm b mm c mm d mm e mm f mm Mass g Price €

552-302-10 0-450 mm 20 mm ±0,04 mm 640 100 18 41.2 91.8 25 10 715 860.00552-303-10 0-600 mm 20 mm ±0,04 mm 790 100 18 41.2 91.8 25 10 790 950.00

552-304-100-1000

mm20 mm ±0,05 mm 1,230 150 24 62.8 113.8 32 10 1,760 1,390.00

552-305-100-1500

mm20 mm ±0,09 mm 1,740 150 24 62.8 113.8 32 10 2,160 1,770.00

552-306-100-2000

mm20 mm ±0,12 mm 2,250 150 24 62.8 113.8 32 10 2,560 2,260.00

Holders for jaws � 600 mmHolders for jaws � 1000 mm

Inch/Metric

No. RangeInside

measur-ing from

Accuracy L mma

mmb

mmc mm d mm

e mm

f " Mass g Price €

552-312-100-450 mm/

0-18"12,7 mm/

0.5"±0,04 mm/

0.002"640 100 18 41.2 91.8 25 0.25 715 860.00

552-313-100-600 mm/

0-24"12,7 mm/

0.5"±0,04 mm/

0.002"790 100 18 41.2 91.8 25 0.25 790 950.00

552-314-100-1000

mm/0-40"25,4

mm/1"±0,05 mm/

0.002"1,230 150 24 62.8 113.8 32 0.5 1,760 1,390.00

552-315-100-1500

mm/0-60"25,4

mm/1"±0,09 mm/

0.004"1,740 150 24 62.8 113.8 32 0.5 2,160 1,770.00

552-316-10*0-2000

mm/0-80"25,4

mm/1"±0,12 mm/

0.005"2,250 150 24 62.8 113.8 32 0.5 2,560 2,260.00


177

ABSOLUTE Digimatic Carbon Fibre Caliper IP66 with Ceramic Jaws

Series 552

Ceramic jaws• The ultra-lightweight design (with carbon fibre reinforced material) reduces to-

tal weight by up to 50%.• Direct readout of inside measurements from the LCD (Offset value can be set easi-

ly by using the Offset button).• Preset function for setting a desired starting point.• SPC data output.

552-156-10

Metric

No. RangeInside

measur-ing from

Accuracy L mm a mm b mm c mm d mm e mm f mm Mass g Price €

552-155-100-450 mm

20 mm ±0,04 mm 640 100 18 41.2 91.8 25 10 715 1,290.00

552-156-100-600 mm

20 mm ±0,04 mm 790 100 18 41.2 91.8 25 10 790 1,400.00

Inch/Metric

No. RangeInside

measur-ing from

AccuracyL

mma

mmb

mmc mm d mm

e mm

f " Mass g Price €

552-165-10*0-450 mm/0-18"

12,7 mm/0.5"

±0,04 mm/0.002"

640 100 18 41.2 91.8 25 0.25 715 1,290.00

552-166-10*0-600 mm/0-24"

12,7 mm/0.5"

±0,04 mm/0.002"

790 100 18 41.2 91.8 25 0.25 790 1,400.00

914055 914057

Functions Series 552Data outputORIGIN (ABS-Zero)ZERO/ABSOFFSET*PRESETAuto power off after 20 min. in non useDATA/HOLDLow voltage alarm

Specifications


Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 10 mm Max. slider speed UnlimitedBattery life approx. 5.000 hoursDelivered In a case, including 1 battery



switch (1 m)68.00


77.00

914055 Pair of jaws for measuring hole centre-to-centre dimensions (over 10 mm)

210.00

914057 Pair of jaws for measuring inside groove diameter (over 50 mm)

240.00


160.00


110.00


92.00

Consumable spares



No. Description Price €914056 Pair of jaws for measuring

hole centre-to-centre dimensions (over 0.4")

210.00

914058 Pair of jaws for measuring inside groove diameter (over 2")

240.00

914055(optional)

914057(optional)* Metric: 20 mm/ Inch/Metric 0.5"


ABSOLUTE Digimatic Carbon Fibre Caliper IP66 with Extra Long Jaws

Functions Series 552Data outputORIGIN (ABS-Zero)ZERO/ABSOFFSET*PRESETAuto power off after 20 min. in non useDATA/HOLDLow voltage alarm

Specifications


Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 10 mmMax. slider speed UnlimitedBattery life approx. 5.000 hoursDelivered In a case, including 1 battery



switch (1 m)68.00


77.00


110.00


92.00

Consumable spares


* metric inch/metric

� 600 mm 20 mm 0.5"

� 1000 mm 20 mm 1"

Series 552

• The ultra-lightweight design (with carbon fibre reinforced material) reduces to-tal weight by up to 50%.

• Direct readout of inside measurements from the LCD (Offset value can be set easi-ly by using the Offset button).

• Preset function for setting a desired starting point.• SPC data output.

552-151-10

Metric

No. RangeInside

measur-ing from

Accuracy A mmC

mmD mm E mm F mm

G mm

H mm

Mass g Price €

552-150-100-450 mm

20 mm±0,06 mm

680 89 91.8 65.5 173 25 8 1,215 1,290.00

552-151-100-600 mm

20 mm±0,06 mm

830 89 91.8 65.5 173 25 8 1,290 1,400.00

552-152-100-1000

mm20 mm

±0,07 mm

1,280 110 113.8 73 170.5 32 12 2,090 1,800.00

552-153-100-1500

mm20 mm

±0,11 mm

1,790 110 113.8 73 170.5 32 12 2,490 2,330.00

552-154-100-2000

mm20 mm

±0,14 mm

2,300 110 113.8 73 170.5 32 12 2,890 2,930.00

Inch/Metric

No. RangeInside

measur-ing from

Accuracy A mmC

mmD mm

E mm

F mmG

mmH

mmMass

gPrice €

552-160-100-450 mm/0-18"

12,7 mm/0.5"

±0,06 mm/0.0025"

680 89 91.8 65.5 173 25 8 1,215 1,290.00

552-161-10*0-600 mm/0-24"

12,7 mm/0.5"

±0,06 mm/0.0025"

830 89 91.8 65.5 173 25 8 1,290 1,400.00

552-162-10*0-1000

mm/0-40"

25,4 mm/1"

±0,07 mm/0.003"

1,280 110 113.8 73 170.5 32 12 2,090 1,800.00

552-163-10*0-1500

mm/0-60"

25,4 mm/1"

±0,11 mm/0.0045"

1,790 110 113.8 73 170.5 32 12 2,490 2,330.00

552-164-10*0-2000

mm/0-80"

25,4 mm/1"

±0,14 mm/0.0055"

2,300 110 113.8 73 170.5 32 12 2,890 2,930.00

B = 10 mm


179

ABSOLUTE Digimatic Carbon Fibre Caliper IP66 with Interchangeable Jaws/ Scriber

Series 552

Optional interchangeable jaws• The ultra-lightweight design (with carbon fibre reinforced materi-

al) reduces total weight by up to 50%.• Direct readout of inside measurements from the LCD (Offset value

can be set easily by using the Offset button).• Preset function for setting a desired starting point.• SPC data output.

552-182-10with optional

accessories

Metric

No. Range Accuracy L mm c mm d mm e mm Mass g Price €552-181-10 0-450 mm ±0,04 mm 640 41.2 91.8 25 650 999.00552-182-10 0-600 mm ±0,04 mm 790 41.2 91.8 25 725 1,120.00552-183-10 0-1000 mm ±0,05 mm 1,230 62.8 113.8 32 1,480 1,650.00552-184-10 0-1500 mm ±0,09 mm 1,740 62.8 113.8 32 1,880 2,120.00552-185-10 0-2000 mm ±0,12 mm 2,250 62.8 113.8 32 2,280 2,680.00

Accuracy: without jaws

Inch/Metric

No. Range Accuracy L mm c mm d mm e mm Mass g Price €552-191-10 0-450 mm/0-18" ±0,04 mm/0.002" 640 41.2 91.8 25 650 999.00552-192-10* 0-600 mm/0-24" ±0,04 mm/0.002" 790 41.2 91.8 25 725 1,120.00552-193-10* 0-1000 mm/0-40" ±0,05 mm/0.002" 1,230 62.8 113.8 32 1,480 1,650.00552-194-10* 0-1500 mm/0-60" ±0,09 mm/0.004" 1,740 62.8 113.8 32 1,880 2,120.00552-195-10* 0-2000 mm/0-80" ±0,12 mm/0.005" 2,250 62.8 113.8 32 2,280 2,680.00

Accuracy: without jaws

Functions Series 552Data outputORIGIN (ABS-Zero)ZERO/ABSOFFSETPRESETAuto power off after 20 min. in non useDATA/HOLDLow voltage alarm

Specifications

Accuracy Refer to the list of specifications (excluding quantizing error)

Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 10 mmMax. slider speed UnlimitedBattery life approx. 5.000 hoursDelivered In a case, including 1 battery

Standard accessories

No. Description05GZA033 Scriber clamp (9 x 9 mm)


No. Description Price €06ADV380A USB Input Tool Direct cable

(2 m)110.00


68.00


77.00


92.00

07CZA056 Exchangeable measuring tips 281.00

Consumable spares


05GZA033


ABSOLUTE Digimatic Carbon Fibre Caliper IP66 with Interchangeable Jaws/ Scriber

Surface plate type

Inside point type

Scriber type

Series 552

Interchangeable jaws (optional)

Standard type Centreline type

Surface plate type Inside point type Scriber type

No. Type A B Mass g Price €07CZA056 Standard (pair) 28 mm 30 mm 90.6 281.0007CZA057 Centreline (pair) 30 mm 30 mm 119.6 346.0007CZA060* Centreline (pair) 1.2" 1.2" 119.6 346.0007CZA044 Surface plate (1 piece) 90 mm/3.5" 28 mm/1.1" 191.3 243.5007CZA058 Inside point (pair) 25 mm 50 mm 98.8 325.0007CZA059* Inside point (pair) 1" 2" 98.8 325.0007CZA055 Scriber (pair) 8 mm 30 mm 63.2 303.0007CZA061* Scriber (pair) 0.31" 1.2" 63.2 303.00

Standard type Centreline type

Surface plate type Inside point type Scriber type


181

Vernier Caliper

Series 530

• Standard type• Main scale and vernier scale satin chrome finished for high readability.• Raised sliding surfaces.

530-122

Metric Graduation 0,05 mmNo. Range Depth bar Accuracy L mm a mm b mm c mm d mm Mass g Price €530-100* 0-100 mm Ø 1,9 mm ±0,05 mm 182 40 21.5 17 16 128 44.50530-102 0-150 mm Ø 1,9 mm ±0,05 mm 229 40 21 17 16 144 41.50530-101 0-150 mm flat ±0,05 mm 229 40 21 17 16 143 27.50530-108 0-200 mm flat ±0,05 mm 288 50 24.5 20.5 16 180 71.50530-109 0-300 mm flat ±0,08 mm 404 64 27.5 22 20 355 173.00530-501 0-600 mm without ±0,10 mm 780 90 47 38 25 1,300 530.00530-502* 0-1000 mm without ±0,15 mm 1,240 130 60 50 32 3,300 1,030.00

Metric Graduation 0,02 mmNo. Range Depth bar Accuracy L mm a mm b mm c mm d mm Mass g Price €530-122 0-150 mm flat ±0,03 mm 229 40 21 17 16 143 32.50530-123 0-200 mm flat ±0,03 mm 288 50 24.5 20.5 16 180 54.00530-124 0-300 mm flat ±0,04 mm 404 64 27.5 22 20 355 173.00

Metric/Inch Graduation 0,02 mm-1/1000"No. Range Depth bar Accuracy L mm a mm b mm c mm d mm Mass g Price €530-312 0-150 mm/0-6" flat ±0,03 mm/0.0015" 229 40 21 17 16 143 53.00530-118 0-200 mm/0-8" flat ±0,03 mm/0.0015" 288 50 24.5 20.5 16 180 76.50530-119 0-300 mm/0-12" flat ±0,04 mm/0.002" 404 64 27.5 22 20 355 190.00

Metric/Inch Graduation 0,05 mm-1/128"No. Range Depth bar Accuracy L mm a mm b mm c mm d mm Mass g Price €530-104 0-150 mm/0-6" flat ±0,05 mm/0.002" 229 40 21 17 16 143 28.50530-316 0-150 mm/0-6" flat ±0,05 mm/0.002" 229 40 21 17 16 145 44.00530-114 0-200 mm/0-8" flat ±0,05 mm/0.002" 288 50 24.5 20.5 16 180 71.50530-115 0-300 mm/0-12" flat ±0,08 mm/0.003" 404 64 27.5 22 20 355 173.00

Inch Graduation 1/128"No. Range Depth bar Accuracy L mm a mm b mm c mm d mm Mass g Price €530-105 0-6" flat ±0.002" 229 40 21 17 16 143 45.00530-116 0-8" flat ±0.002" 229 40 21 17 16 180 71.50

Specifications

Accuracy Refer to the list of specificationsDelivered In a case




43.00


48.50


55.00

530-316Clamping screw below the slider

530-104with metric/inch graduation

Easy reading due to vernier scales inclinedby 14 degrees

530-316 only


Vernier Caliper with Carbide tipped JawsSpecifications

Accuracy Refer to the list of specificationsGraduation 0,05 mmDelivered In a case




43.00


48.50


55.00

Carbide-tipped measuring surfaces

Series 530

• Main scale and vernier scale satin chrome finished for high readability.• Raised sliding surfaces

530-320

Metric Carbide-tipped jaws for outside measurementNo. Range Depth bar Accuracy L mm a mm b mm c mm d mm Mass g Price €530-320 0-150 mm flat ±0,05 mm 229 40 21 17 16 145 110.00530-321 0-200 mm flat ±0,05 mm 288 50 24.5 20.5 16 181 140.00530-322 0-300 mm flat ±0,08 mm 404 64 27.5 22 20 355 305.00

Metric Carbide-tipped jaws for outside/inside measurementNo. Range Depth bar Accuracy L mm a mm b mm c mm d mm Mass g Price €530-335 0-150 mm flat ±0,05 mm 229 40 21 17 16 145 173.00

Easy reading due tovernier scales inclined

by 14 degrees


183

Vernier Caliper with thumb clamp

Series 531

• The slider moves only when the spring-loaded thumb grip is depressed.

531-122

Metric

No. Range Depth bar Accuracy Graduation L mm a mm b mm c mm d mm Mass g Price €531-101 0-150 mm flat ±0,05 mm 0,05 mm 229 40 21.5 17 16 142 32.00531-102* 0-200 mm flat ±0,05 mm 0,05 mm 288 50 25 20.5 16 175 80.00531-103* 0-300 mm flat ±0,08 mm 0,05 mm 403 64 27.5 22 20 360 185.00

Metric/Inch

No. RangeDepth

barAccuracy Graduation L mm a mm b mm c mm d mm Mass g Price €

531-1220-150 mm/

0-6"flat

±0,05 mm/0.002"

0,05 mm-1/128"

229 40 21.5 17 16 142 33.50

531-1080-200 mm/

0-8"flat

±0,05 mm/0.002"

0,05 mm-1/128"

288 50 25 20.5 16 175 80.00

531-1090-300 mm/

0-12"flat

±0,08 mm/0.003"

0,05 mm-1/128"

403 64 27.5 22 20 360 185.00

Metric/Inch High accuracy model

No. RangeDepth

barAccuracy Graduation L mm a mm b mm c mm d mm Mass g Price €

531-1280-150 mm/

0-6"flat

±0,03 mm/0.0015"

0,02 mm-0.001"

229 40 21.5 17 16 142 49.00

531-1290-200 mm/

0-8"flat

±0,03 mm/0.0015"

0,02 mm-0.001"

288 50 25 20.5 16 175 84.00

531-1120-300 mm/

0-12"flat

±0,04 mm/0.002"

0,02 mm-0.001"

403 64 27.5 22 20 360 190.00

Easy reading due tovernier scales inclined

by 14 degrees

Specifications





43.00


48.50


55.00

531-122 only


Vernier Caliper with fine adjustmentSpecifications

Accuracy Refer to the list of specificationsGraduation 0,02 mm or 0,02 mm/0.001"Delivered In soft case




43.00


48.50


55.00

Series 532

• Can measure outside and inside diameter (OD and ID), depth, and steps.

532-119

Metric

No. Range Depth bar Accuracy L mm a mm b mm c mm d mm Mass g Price €532-101 0-130 mm flat ±0,03 mm 229 40 21.5 17 16 165 81.00532-102 0-180 mm flat ±0,03 mm 288 50 25 20.5 16 202 107.00532-103 0-280 mm flat ±0,04 mm 403 64 27.5 22 20 395 245.00

Metric/Inch

No. Range Depth bar Accuracy L mm a mm b mm c mm d mm Mass g Price €532-119 0-130 mm/0-5" flat ±0,03 mm/0.0015" 229 40 21.5 17 16 165 81.00532-120 0-180 mm/0-7" flat ±0,03 mm/0.0015" 288 50 25 20.5 16 202 107.00532-121 0-280 mm/0-11" flat ±0,04 mm/0.002" 404 64 27.5 22 20 395 245.00

Easy reading due tovernier scales inclinedby 14 degrees


185

Left-Handed Vernier Caliper

Series 536

• Parallax-free vernier scales for easy and positive measurement.

536-310

Metric

No. Range Depth bar Accuracy Jaw length mm Mass g Price €536-310 0-150 mm flat ±0,05 mm 40 150 115.00

Specifications


Reading free from parallax errors


Dial CaliperSpecifications

Accuracy Refer to the list of specificationsDepth bar flatDelivered In a case




43.00


48.50


55.00

Titanium coating

Metric type:Dial plate golden

Series 505

• With golden dial plate.• A titanium coating is applied to the sliding surfaces to enhance the durability.

505-683

505-688

Metric

No. Range Accuracy GraduationSliding

titanium coated

L mm a mm b mm c mm d mm Mass g Price €

505-683* 0-150 mm ±0,03 mm0,02 mm,2 mm/rev

231 40 21 16.5 16 175 90.00

505-685 0-150 mm ±0,02 mm0,01 mm,1 mm/rev

231 40 21 16.5 16 176 105.00

505-688 0-150 mm (1) ±0,02 mm0,01 mm,1 mm/rev

231 40 21 16.5 16 176 105.00

505-684* 0-200 mm ±0,03 mm0,02 mm,2 mm/rev

288 50 24.5 20 16 185 185.00

505-686 0-200 mm ±0,03 mm0,01 mm,1 mm/rev

288 50 24.5 20 16 186 200.00

(*) Without thumb roller

L

b c

a

d

e


187

Dial Caliper

Series 505

• With yellow of white dial plate.• Titanium coating is applied to the sliding surfaces to enhance durability (except

for 0-300 mm and 0-12" model).

505-671

505-673

Metric


titanium coated


505-680* 0-100 mm ±0,015 mm0,01 mm,1 mm/rev

180 40 21 16.5 16 151 135.00

505-671 0-150 mm ±0,03 mm0,02 mm,2 mm/rev

231 40 21 16.5 16 175 90.00

505-681 0-150 mm ±0,02 mm0,01 mm,1 mm/rev

231 40 21 16.5 16 176 105.00

505-672 0-200 mm ±0,03 mm0,02 mm,2 mm/rev

288 50 24.5 20 16 185 185.00

505-682 0-200 mm ±0,03 mm0,01 mm,1 mm/rev

288 50 24.5 20 16 186 200.00

505-673 0-300 mm ±0,04 mm0,02 mm,2 mm/rev

403 64 27.5 22 20 370 280.00

Inch


titanium coat-ed


505-674* 0-4" ±0.001" 0.001", 0.1"/rev 180 40 21 16.5 16 150 135.00505-675 0-6" ±0.001" 0.001", 0.1"/rev 231 40 21 16.5 16 175 90.00505-717* 0-6" ±0.001" 0.001", 0.2"/rev 231 40 21 16.5 16 175 90.00505-676* 0-8" ±0.002" 0.001", 0.1"/rev 288 50 24.5 20 16 185 185.00505-719* 0-8" ±0.001" 0.001", 0.2"/rev 288 50 24.5 20 16 185 185.00505-677* 0-12" ±0.002" 0.001", 0.1"/rev 403 64 27.5 22 20 370 280.00505-720 0-12" ±0.002" 0.001", 0.2"/rev 403 64 27.5 22 20 370 280.00

Functions Series 505Thumb rollerDepth barLocking screw

Specifications





43.00


48.50


55.00

Titanium coating

Metric type:dial plate yellow

Inch type:diale plate white


Dial Caliper with Carbide tipped JawsFunctions Series 505Thumb rollerDepth barLocking screw

Specifications





43.00


48.50


55.00

Carbide-tipped jaws

Titanium coating

Metric type:dial plate yellow

Inch type:dial plate white

Series 505

• A titanium coating is applied to the sliding surfaces to enhance durability (except for 0-12" model).

505-711

Metric Carbide-tipped jaws for outside measurement


titanium coat-ed


505-707* 0-150 mm ±0,03 mm0,02 mm,2 mm/rev

231 40 21 16.5 16 175 265.00

Metric Carbide-tipped jaws for outside/inside measurement


titanium coatedL mm a mm b mm c mm d mm Mass g Price €

505-711 0-150 mm ±0,03 mm0,02 mm,2 mm/rev

231 40 21 16.5 16 175 320.00

Inch Carbide-tipped jaws for outside measurement


titanium coat-ed


505-708* 0-6" ±0.001" 0.001", 0.1"/rev 231 40 21 16.5 16 175 265.00505-709* 0-8" ±0.002" 0.001", 0.1"/rev 288 50 24.5 20 16 185 365.00505-710* 0-12" ±0.002" 0.001", 0.1"/rev 403 64 27.5 22 20 370 475.00505-721* 0-12" ±0.002" 0.001", 0.2"/rev 403 64 27.5 22 20 370 475.00

Inch Carbide-tipped jaws for outside/inside measurement


titanium coat-ed


505-712* 0-6" ±0.001" 0.001", 0.1"/rev 231 40 21 16.5 16 175 320.00505-713* 0-8" ±0.002" 0.001"; 0.1"/rev 228 50 24.5 20 16 185 420.00505-714* 0-12" ±0.002" 0.001", 0.1"/rev 403 64 27.5 22 20 370 695.00


189

Metric Vernier Caliper with Nib Style and Standard jaws

Series 533

• Inside and outside measurements can be read directly from the upper and lower vernier scales.

With fine adjustment

Without fine adjustment

Metric With fine adjustment


ing fromAccuracy Graduation L mm a mm b mm c mm d mm Mass g Price €

533-504 0-500 mm 20 mm ±0,05 mm 0,02 mm 680 150 15 56 25 1,250 560.00533-505 0-750 mm 20 mm ±0,07 mm 0,02 mm 963 150 15 56 25 1,550 815.00533-506 0-1000 mm 20 mm ±0,08 mm 0,02 mm 1,230 150 20 56 32 3,450 980.00

Metric Without fine adjustment


ing fromAccuracy Graduation L mm a mm b mm c mm d mm Mass g Price €

533-404 0-500 mm 20 mm ±0,10 mm 0,05 mm 680 150 15 56 25 1,200 510.00533-405 0-750 mm 20 mm ±0,12 mm 0,05 mm 963 150 15 56 25 1,500 715.00533-406 0-1000 mm 20 mm ±0,15 mm 0,05 mm 1,230 150 20 56 32 3,300 865.00

Specifications


Round surface of jaws formeasuring inside dimensions


Metric Vernier Caliper with Nib Style JawsSpecifications

Accuracy Refer to the list of specificationsNote Up to 300 mm: parallax-free design


Series 160

With or without fine adjustment• With top offset vernier scale to enable direct reading of inside dimensions without having to

add the jaw blade width.

160-101

160-127

Metric With fine adjustmentNo. Range Inside measuring from Accuracy Graduation Price €160-128 0-450 mm 20 mm ±0,05 mm 0,02 mm 500.00160-101 0-600 mm 20 mm ±0,05 mm 0,02 mm 570.00160-104 0-1000 mm 20 mm ±0,07 mm 0,02 mm 1,050.00160-110 0-1500 mm 20 mm ±0,10 mm 0,02 mm 2,150.00160-113 0-2000 mm 20 mm ±0,12 mm 0,02 mm 3,050.00

No. L mm a mm b mm c mm d mm e mm f mm R mm Mass g160-128 630 125 100 18 25 14.8 6 10 1,200160-101 780 125 100 18 25 14.8 6 10 1,400160-104 1,240 172 140 24 32 17 10 10 3,500160-110 1,800 212 180 30 32 19 10 10 4,850160-113 2,300 220 180 30 40 23 12 10 10,300

Metric Without fine adjustmentNo. Range Inside measuring from Accuracy Graduation Price €160-130* 0-450 mm 20 mm ±0,10 mm 0,05 mm 500.00160-131* 0-600 mm 20 mm ±0,10 mm 0,05 mm 570.00160-132* 0-1000 mm 20 mm ±0,15 mm 0,05 mm 1,050.00160-133* 0-1500 mm 20 mm ±0,22 mm 0,05 mm 2,150.00160-134* 0-2000 mm 20 mm ±0,28 mm 0,05 mm 3,050.00

No. L mm a mm b mm c mm d mm e mm f mm R mm Mass g160-130* 630 125 100 18 25 14.8 6 10 1,100160-131* 780 125 100 18 25 14.8 6 10 1,300160-132* 1,240 172 140 24 32 17 10 10 3,300160-133* 1,800 212 180 30 32 19 10 10 4,700160-134* 2,300 220 180 30 40 23 12 10 9,900

L

R

d

cf

e

b

a


191

Inch/Metric Vernier Caliper with Nib Style Jaws

Series 160

With fine adjustment• With top offset vernier scale to enable direct reading of inside dimensions without having to


160-151

Metric/Inch

No. Range Inside measuring from Accuracy Graduation Price €160-150 0-300 mm/0-12" 10 mm/0.394" ±0,04 mm/0.0015" 0,02 mm/0.001" 315.00160-151 0-450 mm/0-18" 20 mm/0.787" ±0,05 mm/0.002" 0,02 mm/0.001" 500.00160-153 0-600 mm/0-24" 20 mm/0.787" ±0,05 mm/0.002" 0,02 mm/0.001" 570.00160-155 0-1000 mm/0-40" 20 mm/0.787" ±0,07 mm/0.003" 0,02 mm/0.001" 1,050.00160-157 0-1500 mm/0-60" 20 mm/0.787" ±0,10 mm/0.004" 0,02 mm/0.001" 2,150.00160-159 0-2000 mm/0-80" 20 mm/0.787" ±0,12 mm/0.005" 0,02 mm/0.001" 3,050.00

No. L mm a mm b mm c mm d mm e mm f mm R mm Mass g160-150 445 95 25 12 20 10 3.8 5 450160-151 630 125 100 18 25 14.8 6 10 1,200160-153 780 125 100 18 25 14.8 6 10 1,400160-155 1,240 172 140 24 32 17 10 10 3,500160-157 1,800 212 180 30 32 19 10 10 4,850160-159 2,300 220 180 30 40 23 12 10 10,200

Inch/Metric

No. Range Inside measuring from Accuracy Graduation Price €160-125 0-300 mm/0-12" 7,62 mm/0.3" ±0,04 mm/0.0015" 0,02 mm/0.001" 315.00160-119 0-450 mm/0-18" 12,7 mm/0.5" ±0,05 mm/0.002" 0,02 mm/0.001" 500.00160-103 0-600 mm/0-24" 12,7 mm/0.5" ±0,05 mm/0.002" 0,02 mm/0.001" 570.00160-106 0-1000 mm/0-40" 25,4 mm/1" ±0,07 mm/0.003" 0,02 mm/0.001" 1,050.00160-112 0-1500 mm/0-60" 25,4 mm/1" ±0,10 mm/0.004" 0,02 mm/0.001" 2,150.00160-115 0-2000 mm/0-80" 25,4 mm/1" ±0,12 mm/0.005" 0,02 mm/0.001" 3,050.00

No. L mm a mm b mm c mm d mm e mm f mm R mm Mass g160-125 445 95 25 12 20 10 3.8 5 450160-119 630 125 100 18 25 14.8 6 10 1,200160-103 780 125 100 18 25 14.8 6 10 1,400160-106 1,240 172 140 24 32 17 10 10 3,500160-112 1,800 212 180 30 32 19 10 10 4,850160-115 2,300 220 180 30 40 23 12 10 10,200

L

R

d

cf

e

b

a

Specifications

Accuracy Refer to the list of specificationsNote Up to 300 mm/12": parallax-free design



Inch Vernier Caliper with Nib Style JawsSpecifications

Accuracy Refer to the list of specificationsGraduation 0.001"Note Up to 12" : parallax-free design


Series 160

With fine adjustment• With top offset vernier scale to enable direct reading of inside dimensions without having to


Inch

No. Range Inside measuring from Accuracy L mm Price €160-124* 0-12" 0.3" ±0.0015" 445 315.00160-116* 0-18" 0.5" ±0.002" 630 500.00160-102* 0-24" 0.5" ±0.002" 780 570.00160-105* 0-40" 1" ±0.003" 1,240 1,050.00160-111* 0-60" 1" ±0.004" 1,800 2,150.00160-114* 0-80" 1" ±0.005" 2,300 3,050.00

No. a mm b mm c mm d mm e mm f mm R mm Mass g160-124* 95 25 12 20 10 3.8 5 450160-116* 125 100 18 25 14.8 6 10 1,200160-102* 125 100 18 25 14.8 6 10 1,400160-105* 172 140 24 32 17 10 10 3,500160-111* 212 180 30 32 19 10 10 4,850160-114* 220 180 30 40 23 12 10 10,200


193

Metric and Inch Vernier Caliper with Long Jaws

Series 534

With or without fine adjustment• Long jaws for measuring hard-to-reach workpiece features.• With top offset vernier scale to enable direct reading of inside, dimensions without having to


534-110

Metric Without fine adjustmentNo. Range Inside measuring from Accuracy Graduation Price €534-109* 0-300 mm 10 mm ±0,07 mm 0,05 mm 268.00534-110* 0-500 mm 20 mm ±0,13 mm 0,05 mm 635.00

No. L mm a mm b mm c mm d mm e mm f mm R mm Mass g534-109* 445 110 90 12 20 7 3.8 5 400534-110* 682 225 200 18.5 25 12 6 10 1,400

Metric With fine adjustmentNo. Range Inside measuring from Accuracy Graduation Price €534-113 0-300 mm 10 mm ±0,04 mm 0,02 mm 282.00534-114 0-500 mm 20 mm ±0,06 mm 0,02 mm 668.00534-115 0-750 mm 20 mm ±0,08 mm 0,02 mm 860.00534-116 0-1000 mm 20 mm ±0,10 mm 0,02 mm 1,120.00

No. L mm a mm b mm c mm d mm e mm f mm R mm Mass g534-113 445 110 90 12 20 7 3.8 5 460534-114 682 225 200 18.5 25 12 6 10 1,500534-115 995 232 200 18.5 32 12 8 10 2,900534-116 1,230 232 200 18.5 32 12 8 10 3,500

Inch With fine adjustmentNo. Range Inside measuring from Accuracy Graduation Price €534-117* 0-12" 0.3" ±0.002" 0.001" 282.00534-118* 0-20" 0.8" ±0.003" 0.001" 668.00534-119* 0-30" 0.8" ±0.004" 0.001" 860.00534-120* 0-40" 0.8" ±0.004" 0.001" 1,120.00

No. L mm a mm b mm c mm d mm e mm f mm R mm Mass g534-117* 445 110 90 12 20 7 3.8 5 1,100534-118* 682 225 200 18.5 25 12 6 10 3,500534-119* 995 232 200 18.5 32 12 8 10 8,500534-120* 1,230 232 200 18.5 32 12 8 10 10,000

Specifications

Accuracy Refer to the list of specifications


L

d

cf

e

R

b

a


Metric/Inch Vernier Caliper with Long JawsSpecifications



Series 534

With fine adjustment• Long jaws for measuring hard-to-reach workpiece features.

534-102

Metric/Inch

No. Range Inside measuring from Accuracy Graduation Price €534-101 0-300 mm/0-12" 10 mm/0.394" ±0,07 mm/0.0027" 0,05 mm-1/128" 260.00534-105 0-300 mm/0-12" 10 mm/0.394" ±0,04 mm/0.0015" 0,02 mm/0.001" 282.00534-102 0-500 mm/0-20" 20 mm/0.787" ±0,13 mm/0.005" 0,05 mm-1/128" 575.00534-106 0-500 mm/0-20" 20 mm/0.787" ±0,06 mm/0.0025" 0,02 mm/0.001" 668.00534-103 0-750 mm/0-30" 20 mm/0.787" ±0,16 mm/0.0064" 0,05 mm-1/128" 790.00534-107 0-750 mm/0-30" 20 mm/0.787" ±0,08 mm/0.003" 0,02 mm/0.001" 860.00534-104 0-1000 mm/0-40" 20 mm/0.787" ±0,20 mm/0.008" 0,05 mm-1/128" 965.00534-108 0-1000 mm/0-40" 20 mm/0.787" ±0,10 mm/0.004" 0,02 mm/0.001" 1,120.00

No. L mm a mm b mm c mm d mm e mm f mm R mm Mass g534-101 445 110 90 12 20 7 3.8 5 400534-105 445 110 90 12 20 7 3.8 5 400534-102 682 225 200 18.5 25 12 6 10 1,500534-106 682 225 200 18.5 25 12 6 10 1,500534-103 995 232 200 18.5 32 12 8 10 2,900534-107 995 232 200 18.5 32 12 8 10 2,900534-104 1,230 232 200 18.5 32 12 8 10 3,500534-108 1,230 232 200 18.5 32 12 8 10 3,500


195

ABSOLUTE Digimatic Caliper with constant measuring force

Series 573

• Due to the low and constant measuring force these calipers are ideal for measur-ing elastic workpieces such as plastic parts and rubber parts that standard cali-pers cannot measure accurately.

573-191-20

Metric

No. Range Accuracy Mass g Price €573-191-20 0-180 mm ±0,05 mm 253 860.00

Inch/Metric

No. Range Accuracy Mass g Price €573-291-20* 0-180 mm/0-7" ±0,05 mm/0.002" 253 860.00


Specifications


Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 9 mmJaw retraction 0,3 mmMeasuring force 0,5 - 1 NMax. slider speed UnlimitedBattery life approx. 20.000 hoursDelivered In a case, including 1 battery



switch (1 m)36.50


42.00

959143 Data-hold unit 24.0002AZD790C U-WAVE Data Cable with

data switch87.00


97.00

Consumable spares


A consistently low measuring force can be guaranteed by only taking measurements when the pointer is between the two fiducial lines.Measurement procedure


ABSOLUTE Digimatic Caliper for tolerance measurement


Specifications

Accuracy ±0,02 mm or 0,02 mm/0.001"Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character height 9 mmRepeatability 0,01 mmJaw retraction 2 mmMeasuring force 7 - 14 NMax. slider speed UnlimitedBattery life approx. 20.000 hoursDelivered In a case, including 1 battery



switch (1 m)36.50


42.00


data switch87.00


97.00

Consumable spares


Series 573

• The ABSOLUTE Digimatic snap caliper features a spring-loaded mechanism to allow quick and efficient GO/±NO-GO inspection for mass produced parts.

573-182-20

Metric

No. Range L mm a mm b mm c mm d mm Mass g Price €573-181-20* 0-100 mm 233 40 21 16.5 16 213 340.00573-182-20 0-150 mm 290 50 24.5 20 16 233 390.00

Inch/Metric

No. Range L mm a mm b mm c mm d mm Mass g Price €573-281-20* 0-100 mm/0-4" 233 40 21 16.5 16 213 340.00573-282-20* 0-150 mm/0-6" 290 50 24.5 20 16 233 390.00


197

Carbide Scribing Caliper

Series 573

ABSOLUTE Digimatic Caliper• The carbide-tipped jaws facilitate fine scribing on workpiece.• With depth bar.• SPC data output.

573-676

Metric

No. Range Accuracy L mm a mm b mm c mm d mm e mm Mass g Price €573-676 0-150 mm ±0,02 mm 229 46 21.5 17 16 33 166 295.00573-677 0-200 mm ±0,02 mm 288 50 25 20.5 16 43 196 385.00573-679 0-300 mm ±0,03 mm 403 64 27.5 22 20 54 345 870.00

Functions Series 573Data outputORIGIN (ABS-Zero)Auto power off after 20 min. in non useLow voltage alarm

Specifications


Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mm (150,

200 mm) 10,2 mm (300 mm)Max. slider speed

Unlimited

Battery life 15.000 hours (150 mm, 200 mm) 5.000 hours (300 mm)




switch (1 m)68.00


77.00


92.00


110.00

Consumable spares


Sample application


Carbide Scribing CaliperSpecifications


Series 536

Vernier Caliper• The carbide-tipped jaws facilitate fine scribing on workpiece.

536-221

Metric

No. Range Accuracy L mm a mm b mm c mm d mm e mm Mass g Price €536-221 0-150 mm ±0,05 mm 229 40 21.5 17 16 33 150 129.00536-222 0-200 mm ±0,05 mm 288 50 25 20.5 16 43 180 156.00536-223 0-300 mm ±0,08 mm 403 64 27.5 22 20 54 400 332.00


199

Offset Caliper

Series 573

Absolute Digimatic Caliper• Absolute Digimatic Caliper.• The beam-mounted jaw can be adjusted to facilitate measurement of stepped

sections and hard-to-reach workpiece features.

573-601

Metric With thumb rollerNo. Range Accuracy a mm b mm c mm d mm Mass g Price €573-601* 0-150 mm ±0,02 mm 95 10 40 30 168 560.00573-604* 0-300 mm ±0,03 mm 135 15 64 51 350 770.00

Metric Without thumb rollerNo. Range Accuracy a mm b mm c mm d mm Mass g Price €573-611 0-150 mm ±0,02 mm 95 10 40 30 168 510.00573-612 0-200 mm ±0,02 mm 95 10 50 38.5 198 570.00573-614 0-300 mm ±0,03 mm 135 15 64 51 350 720.00

Inch/Metric With thumb rollerNo. Range Accuracy a mm b mm c mm d mm Mass g Price €573-701 0-150 mm/0-6" ±0,03 mm/0.001" 95 10 40 30 168 560.00573-704* 0-300 mm/0-12" ±0,04 mm/0.0015" 135 15 64 51 350 770.00


Specifications

Accuracy Refer to the list of specfications(excluding quantizing error)

Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mm (150

mm, 200 mm) 10,2 mm (300 mm)Max. slider speed

Unlimited

Battery life approx. 15.000 hours (150 mm, 200 mm) 5.000 hours (300 mm)




switch (1 m)68.00


77.00


92.00


110.00

Consumable spares


a

b

c

d


Offset CaliperSpecifications


Series 536

Vernier Caliper• The beam-mounted jaw can be adjusted to facilitate measurement of stepped sections and hard-

to-reach workpiece features.

536-101

Metric

No. Range Accuracy L mm a mm b mm c mm d mm e mm Mass g Price €536-101 0-150 mm ±0,05 mm 229 95 40 10 16 7.5 150 244.00536-102 0-200 mm ±0,05 mm 286 95 50 10 16 8.5 200 296.00536-103 0-300 mm ±0,08 mm 403 135 64 15 20 12 400 396.00


201

Offset Centreline Caliper

Series 573

Absolute Digimatic Caliper• Specially designed for hole centre-to-centre measurements in the

same plane, or between offset planes. • Can also measure from an edge to a hole centre.• Hole diameter should be in the range 1,5 mm-10 mm (0.06"-0.4").

573-615

Metric With thumb rollerNo. Range Accuracy a mm t mm Mass g Price €573-605* 10-160 mm ±0,03 mm 75 3 157 530.00573-606* 10-210 mm ±0,03 mm 75 3 177 590.00573-608* 10-310 mm ±0,04 mm 100 3.8 320 770.00

Metric Without thumb rollerNo. Range Accuracy a mm t mm Mass g Price €573-615 10-160 mm ±0,03 mm 75 3 157 480.00573-616 10-210 mm ±0,03 mm 75 3 177 540.00573-618 10-310 mm ±0,04 mm 100 3.8 320 720.00

Inch/Metric With thumb rollerNo. Range Accuracy a mm t mm Mass g Price €573-705* 10-160 mm/0.4-6.4" ±0,04 mm/0.0015" 75 3.5 157 530.00573-706 10-210 mm/0.4-8.4" ±0,04 mm/0.0015" 75 3.5 177 590.00573-708* 10-310 mm/0.4-12.4" ±0,04 mm/0.0015" 100 3.8 320 770.00

Functions Series 573Data outputORIGIN (ABS-Zero)OFFSET*PRESETAuto power off after 20 min. in non useLow voltage alarm

Specifications


Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mm (150

mm, 200 mm) 10,2 (300 mm)Max. slider speed

Unlimited

Battery life approx. 15.000 hours (150 mm , 200 mm) 5.000 hours (300 mm)




switch (1 m)68.00


77.00


92.00


110.00

Consumable spares


mma

10

30 10

ø1

t

* 10 mm


Offset Centreline CaliperSpecifications


Series 536

Vernier-caliper• Specially designed for hole centre-to-centre measurements in the same plane, or between offset

planes. • Can also measure from an edge to a hole centre.• Hole diameter should be in the range 1,5 mm-10 mm (0.06"-0.4").

536-106

Metric

No. Range Accuracy L mm a mm d mm t mm Mass g Price €536-105 10-150 mm ±0,05 mm 229 75 16 3 140 328.00536-106 10-200 mm ±0,05 mm 282 75 16 3 160 383.00536-107 10-300 mm ±0,08 mm 383 100 20 3.8 320 462.00


203

Edge Centre Caliper

Series 536

Vernier Caliper• Caliper for measuring distance between an edge and the centre of a hole.

536-109

Metric

No. Range L mm a mm b mm c mm d mm e ø mm Mass g Price €536-109 5-300 mm 393 100 64 10 20 1 320 419.00

Specifications

Accuracy ±0,05 mmGraduation 0,05 mmDelivered In a case


Swivel Vernier CaliperSpecifications


Series 536

• The moving jaw can be rotated to measure sectioned shafts.• With swivelling jaw and depth bar.

536-212

Metric

No. Range Accuracy Rotation of Mass g Price €536-212 0-200 mm ±0,05 mm ±90° 190 523.00


205

ABSOLUTE Digimatic Back-Jaw Centreline Caliper

Series 573

• Specially designed to measure hole centre-to-centre or edge-to-centre distances. • Provided with jaws on the back of the slider, measurements can be read easily

from above.• Direct reading of pitch measurements is available due to the offset value setting

function.

573-116-10Centre-to-centre type

573-118-10Edge-to-centre type

Metric Centre-to-centre typeNo. Range Accuracy Mass g Price €573-116-10 10-200 mm ±0,10 mm 485 1,190.00573-117-10 10-300 mm ±0,15 mm 580 1,300.00

Metric Edge-to-centre typeNo. Range Accuracy Mass g Price €573-118-10* 10-200 mm ±0,10 mm 490 1,090.00573-119-10* 10-300 mm ±0,15 mm 585 1,200.00

573-118-10 573-116-10573-119-10 573-117-10

Functions Series 573Data outputORIGIN (ABS-Zero)ZERO/ABSOFFSET*PRESETON/OFFLow voltage alarm

Specifications


Digital step 0,01 mmDisplay LCD, Character Height 7 mmMax. slider speed UnlimitedBattery life approx. 5.000 hoursDelivered In a case, including 1 battery



switch (1 m)36.50


42.00


data switch87.00


97.00

Consumable spares


Edge-to-center type

Centre-to-centre type

* 10 mm


ABSOLUTE Digimatic Point CaliperFunctions Series 573Data outputORIGIN (ABS-Zero)Auto power off after 20 min. in non useLow voltage alarm

Specifications


Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mmMax. slider speed UnlimitedBattery life approx. 15.000 hoursDelivered In a case, including 1 battery



switch (1 m)68.00


77.00


92.00


110.00

Consumable spares


Pointed measuring jaws

Fine measuring jaws

Series 573

• Narrow-tip jaws fit into very small grooves and tracks, making many previously difficult outside measurements far easier to ob-tain.

573-622

573-626

Metric Pointed measuring jawsNo. Range Accuracy Thumb roller Mass g Price €573-621 0-150 mm ± 0,02 mm 163 450.00573-622 0-150 mm ± 0,02 mm 163 400.00

Metric Fine measuring jawsNo. Range Accuracy Thumb roller Mass g Price €573-625 0-150 mm ± 0,02 mm 163 500.00573-626 0-150 mm ± 0,02 mm 163 450.00

Inch/Metric Pointed measuring jawsNo. Range Accuracy Thumb roller Mass g Price €573-721 0-150 mm/0-6" ± 0.001" 163 450.00

Inch/Metric Fine measuring jawsNo. Range Accuracy Thumb roller Mass g Price €573-725* 0-150 mm/0-6" ± 0.001" 163 500.00

mm

10

0.30.3

3040

21°

Pointed measuring jawsFine measuring jaws


207

Vernier Point Caliper

Series 536

• Narrow-tip jaws fit into very small grooves and tracks, making many previously difficult outside measurements far easier to obtain.

536-121

Metric

No. Range Accuracy Graduation Mass g Price €536-121 0-150 mm ±0,05 mm 0,05 mm 150 175.00

mm

4021°

0.3

30

10

0.3

Specifications



Blade Type CaliperFunctions Series 573Data outputORIGIN (ABS-Zero)Auto power off after 20 min. in non useLow voltage alarm

Specifications





switch (1 m)68.00


77.00


92.00


110.00

Consumable spares


Series 573

Absolute Digimatic Caliper• The thin blade-type jaws fit into very small grooves and make previously difficult

outside measurements far easier to obtain.• The outside measuring faces are carbide.

573-635

Metric

No. Range Accuracy Thumb roller Mass g Price €573-634* 0-150 mm ±0,02 mm 168 630.00573-635 0-150 mm ±0,02 mm 168 580.00

Inch/Metric

No. Range Accuracy Thumb roller Mass g Price €573-734 0-150 mm/0-6" ±0,02 mm/0.001" 168 630.00

mm

20

40

0.75

3.5

Specifications


Series 536

Vernier Caliper• The thin blade-type jaws fit into very small grooves and make previously difficult outside meas-

urements far easier to obtain.• The outside measuring faces are carbide.

536-134

Metric

No. Range Accuracy L mm a mm b mm c mm d mm e mm Mass g Price €536-134 0-150 mm ±0,05 mm 229 20 40 0.75 16 3 140 335.00536-135 0-200 mm ±0,05 mm 286 25 50 0.75 16 3 180 363.00536-136 0-300 mm ±0,08 mm 30 64 1 16 3.8 420 436.00


209

ABSOLUTE Digimatic Neck Caliper

Series 573

• Can measure wall thickness inside bores and recesses.

573-651

573-654Point jaw type

Metric

No. Range Accuracy Thumb roller Mass g Price €573-651 0-150 mm ±0,03 mm 157 560.00573-653 0-150 mm ±0,03 mm 157 510.00

Metric Point jaw typeNo. Range Accuracy Thumb roller Mass g Price €573-652 0-150 mm ±0,03 mm 157 650.00573-654 0-150 mm ±0,03 mm 157 600.00

Inch/Metric


Inch/Metric Point jaw typeNo. Range Accuracy Thumb roller Mass g Price €573-752* 0-150 mm/0-6" ±0,03 mm/0.0015" 157 650.00

mm

5

533.5 4028

.5

mm

33.5 40

ø2.4

10

5(e)

5

ø0.5

Point jaw type


Specifications


Digital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mmMax. slider speed UnlimitedBattery life aprox. 15.000 hoursDelivered In a case, including 1 battery



switch (1 m)68.00


77.00


92.00


110.00

Consumable spares



Vernier Neck CaliperSpecifications


Series 536

• Can measure wall thickness inside bores and recesses.

536-151


Metric

No. Range Accuracy Mass g Price €536-151 0-150 mm ±0,05 mm 140 327.00

Metric Point jaw typeNo. Range Accuracy L mm a mm b mm c mm d mm e mm Mass g Price €536-152 0-150 mm ±0,05 mm 229 38 5 5 16 2 140 420.00

5

355

mm

536-151



211

ABSOLUTE Digimatic Inside Caliper

Series 573

Inside groove type• Specially designed for inside measurements in hard-to-reach places.

573-647


Metric


Metric Point jaw typeNo. Range Accuracy Thumb roller Mass g Price €573-646 20-170 mm ±0,03 mm 157 660.00573-648 20-170 mm ±0,03 mm 157 610.00

Inch/Metric

No. Range Accuracy Thumb roller Mass g Price €573-745* 10-150 mm/0.4-6" ±0,05 mm/0.002" 147 630.00

Inch/Metric Point jaw typeNo. Range Accuracy Thumb roller Mass g Price €573-746 20-150 mm/0.8-6" ±0,03 mm/0.0015" 157 660.00

mm

233

35

320

53

3.5

23.5

16

R5 R5

mm

(233)

31.5 38 40

2

(60°)

ø0.5

ø2.4

28.5

56

(16)

5 (e)

10

5

Functions Series 573Data outputORIGIN (ABS-Zero)OFFSET*Auto power off after 20 min. in non useLow voltage alarm

Specifications





switch (1 m)68.00


77.00


92.00


110.00

Consumable spares


* 20 mm


Inside Vernier CaliperSpecifications


> ø20

Series 536

• Specially designed for inside measurements in hard-to-reach places.

536-145


Metric Point jaw typeNo. Range Accuracy a mm b mm c mm d mm e mm f mm g mm Mass g Price €536-146 20-150 mm ±0,05 mm 229 16 38 31 5 5 2 140 385.00536-147 30-300 mm ±0,08 mm 403 20 98 89 5 10 2 370 423.00536-148 70-450 mm ±0,10 mm 610 25 145 136 10 25 5 1,250 796.00536-149 70-600 mm ±0,12 mm 750 25 145 136 10 25 5 1,430 818.00

Metric


mm

229

35

320

53

3

16

R5 R5


213

Inside Vernier Caliper

Series 536

• Can measure width of grooves and lands inside bores and recesses.

536-171

536-172

Metric


fromL mm a mm b mm c mm d mm e mm f mm g mm Mass g Price €

536-171 0-200 mm 10 mm 320 28 12 4 5 3.5 170 432.00536-172 0-200 mm 2 mm 320 28 28.5 20 12 4 1 3.5 200 546.00

L

d

a

fe

b

cg

R5: 536-171(1): 536-172

(1) flat touch for 536-172

Series 536

Functions 536-

172

Fine adjustment

Specifications

Accuracy ±0,03 mmGraduation 0,02 mmDelivered In a case

> ø3

0mm

> ø3

0mm


Inside CaliperFunctions Series 573Data outputORIGIN (ABS-Zero)Auto power off after 20 min. in non useLow voltage alarm

Specifications

Accuracy Refer to the list of specificationsDigital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7,5 mmMax. slider speed UnlimitedBattery life approx. 15.000 hoursDelivered In a case, including 1 battery



switch (1 m)68.00


77.00


92.00


110.00

Consumable spares


mm

Section X−X’

290

8

65

0.3 3

90.5

74.5

57.570

16

X‘XSeries 573

ABSOLUTE Digimatic Caliper - Knife-edge type• Specially designed for inside measurements in hard-to-reach places.• With long narrow jaws.

573-642

Metric


Inch/Metric

No. Range Accuracy Thumb roller Mass g Price €573-742* 10-200 mm/0.4-8" ±0,05 mm/0.002" 227 710.00


215

Inside Caliper

Series 536

Vernier Caliper - Knife-edge type• Specially designed for inside measurements in hard-to-reach places.• With long narrow jaws.

536-142

Metric


Specifications


288

8

700.

3 3

16

X‘X

Section X−X’

mm


Tube Thickness CaliperFunctions Series 573Data outputORIGIN (ABS-Zero)Auto power off after 20 min. in non useLow voltage alarm

Specifications





switch (1 m)68.00


77.00


92.00


110.00

Consumable spares


Series 573

ABSOLUTE Digimatic Caliper• The beam-mounted jaw is a round bar that facilitates measurements of tube wall

thickness.

573-661

Metric


Metric/Inch


mm

32

56

235

40

ø3

16

Specifications


229

32

56

40

ø3

16

mm

Series 536

Vernier Caliper • The beam-mounted jaw is a round bar that facilitates measurements of tube wall thickness.

536-161

Metric



217

Plastic Caliper

Series 700

• Ideal for use in laboratory, wood-shop, office, etc. • Choice of standard and deep throat type models.

700-127 / 700-126

700-128

Metric

No. Range Accuracy Mass g Price €700-127 0-150 mm ±0,2 mm 45 47.00700-128 0-150 mm ±0,5 mm 55 69.00

Inch/Metric

No. Range Accuracy Mass g Price €700-126* 0-150 mm/0-6" ±0,2 mm/0.008" 45 47.00

235

(60)

(34)40

164(1

4.2)

1

15

1519

mm

700-127 / 700-126mm

65

8

(14.

2)

416

(34)

(60)235

80

700-128

Functions Series 700ZEROON/OFFLow voltage alarm

Specifications


Digital step 0,1 mm or 0,1 mm/0.001"Max. slider speed 1800 mm/s

Consumable spares



Optional Accessory for CalipersDepth base attachment

• For vernier and dial calipers which have a depth measuring bar.• Finely ground base surface and secure locking clamp.

050084-10 050083-10

No. Size Applicable measuring range of caliper a mm b mm c mm d mm e mm Mass g Price €050083-10 75 mm 100, 150 and 200 mm/4, 6 and 8" 25 75 24.5 9 16 130 43.00050084-10 100 mm 100, 150 and 200 mm/4, 6 and 8" 25 100 24.5 9 16 160 48.50050085-10 125 mm 300 mm/12" 30 125 28.5 11.5 20 270 55.00

Sample application


219

Digimatic Depth Micrometer

Series 329

Interchangeable Rod Type• ø 4 mm interchangeable rods, with lapped measuring surfaces• Ratchet stop provides constant measuring force.• Measuring rod lock.• SPC data output.

329-250-10

Metric

No. Range Base (W x T) Number of rods Mass g Price €329-250-10 0-150 mm 101,6 x 16 mm 6 540 700.00329-251-10 0-300 mm 101,6 x 16 mm 12 790 910.00

Inch/Metric

No. Range Base (W x T) Number of rods Mass g Price €329-350-10 0-150 mm/0-6" 101,6 x 16 mm/4 x 0.63" 6 540 700.00329-351-10 0-300 mm/0-12" 101,6 x 16 mm/4 x 0.63" 12 790 910.00

ø18.

3

ø4

101.

6

18 3.5 47.2 2.3 3 60.9 17A

mm

A = Range

Functions Series 329Data outputZERO/ABS2 x PRESETAuto power off after 20 min. in non useDATA/HOLDLock functionLow voltage alarm

Specifications

Digital step 0,001 mm or 0,001 mm/0.00005"

Micrometer Head Feed (0-25 mm) (excluding quantizing error)

±3 μm

Zero point errors of rods ±4 μm (0-150 mm)±6 μm (0-300 mm)

Flatness of reference surface (base)

2 μm

Flatness of measuring face (rod)

0,3 μm

Parallelism between measuring face (rod) and reference surface (base)

(4+L/50) μmL = max. measuring length (mm)

Measuring span 25 mmRod ø4 mmScales Thimble and sleeve satin

chrome finish, ø18 mmSpindle pitch 0,5 mm with spindle lockMeasuring surfaces Hardened precision ground,

micro-lap finishBase Hardened tool steelMeasuring force 5-10 NBattery life approx. 1.2 yearsDelivered Including box, key and 1

battery



switch (1 m)71.00


80.00

02AZD790B Connecting cable U-Wave with data switch

92.00

06ADV380B USB Input Tool Direct cable with data switch (2 m)

110.00

Consumable spares



Depth MicrometerSpecifications

Graduation 0,01 mm or 0.001"Zero point error of rods ±4 μm (0-150 mm)

±6 μm (0-300 mm)Micrometer Head Feed (0-25 mm)

±3 μm


1,3 μm for 63,5 mm2 μm for 101,6 mm


0,3 μm


(4+ L/50) μm L=max. measuring length (mm)

Scales Thimble and sleeve satin chrome finish ø18 mm

Measuring span 25 mmSpindle pitch 0,5 mm, with spindle lockMeasuring surfaces Hardened, precision ground,

micro-lap finishBase Hardened tool steelMeasuring force 5-10 NDelivered Including box and key

Series 129

Interchangeable Rod Type• ø 4 mm interchangeable rods, with lapped measuring surfaces• Ratchet stop provides constant measuring force. • Measuring rod lock.

129-112

Metric Base 63,5 x 16 mmNo. Range Number of rods Mass g Price €129-154* 0-25 mm 240 147.00129-109 0-50 mm 2 260 151.00129-110 0-75 mm 3 280 153.00129-111 0-100 mm 4 310 201.00129-112 0-150 mm 6 370 278.00129-152 0-300 mm 12 600 421.00

Metric Base 101,6 x 16 mmNo. Range Number of rods Mass g Price €129-155* 0-25 mm 290 174.00129-113 0-50 mm 2 310 178.00129-114 0-75 mm 3 330 189.00129-115 0-100 mm 4 355 220.00129-116 0-150 mm 6 410 289.00129-153 0-300 mm 12 640 443.00

Inch Base 4 x 0.63"No. Range Number of rods Mass g Price €129-129* 0-2" 2 310 178.00129-130* 0-3" 3 330 189.00129-131* 0-4" 4 355 220.00129-132 0-6" 6 410 289.00129-150 0-12" 12 640 443.00

Inch Base 2.5 x 0.63"No. Range Number of rods Mass g Price €129-126 0-3" 3 280 153.00129-127* 0-4" 4 310 201.00129-128 0-6" 6 370 278.00129-149* 0-12" 12 600 421.00

mm

A

ø18.

3

65.4 17318

ø4

101.

6

A = Range


221

Depth Micrometer

Series 128

• ø4 mm measuring rod.• Ratchet stop provides constant measuring force.• Measuring rod lock.• Carbide-tipped measuring rod model is available.

128-101

Metric

No. Range Base (W x T) Mass g Price €128-101 0-25 mm 63,5 x 16 mm 200 129.00128-102 0-25 mm 101,6 x 16 mm 250 162.00

Metric Carbide-tipped measuring rodNo. Range Base (W x T) Mass g Price €128-103* 0-25 mm 63,5 x 16 mm 200 154.50128-104* 0-25 mm 101,6 x 16 mm 250 194.50

Inch

No. Range Base (W x T) Mass g Price €128-105 0-1" 2.5 x 0.63" 200 129.00128-106 0-1" 4 x 0.63" 250 162.00

Specifications

Graduation 0,01 mm or 0.001"Micrometer Head Feed (0-25 mm)

±3 μm


1,3 μm (for 63,5 mm)2 μm (for 101,6 mm)


0,3 μm


(4+L/50) μm L=max. measuring length (mm)

Scales Thimble and sleeve satin chrome finish ø18 mm

Measuring span 25 mmSpindle pitch 0,5 mm with spindle lockMeasuring surfaces Hardened precision ground,

micro-lap finishBase Hardened tool steelMeasuring force 5-10 NDelivered Including box and key


ABSOLUTE Digimatic Depth GaugeFunctions Series 571Data outputORIGIN (ABS-Zero)ZERO/ABSON/OFFLow voltage alarm

Specifications


Repeatability 0.01 mmDigital step 0,01 mm or 0,01 mm/0.0005"Display LCD; Character Heighr 9 mm 150,

200 300 mm 10 mm (>300 mm)Max. slider speed UnlimitedBattery life approx. 20.000 hoursDelivered In a case (450/1000 mm)

Including 1 battery



switch (1 m)36.50


42.00


87.00

900370 Base length 180 mmfor range up to 300 mmThickness 8 mm

50.00


70.00


78.00


97.00

Consumable spares



No. Description Price €900367 Base length 7"

for range up to 12"50.00

900368 Base length 10"for range up to 12"

70.00


78.00

Up to 300 mm range models

Series 571

• The ABSOLUTE feature of this gauge keeps track of the origin point (once set) for the entire life of the battery.

• Base and measuring faces are hardened and micro-lapped.• SPC data output.

571-201-20

Metric

No. Range Accuracy Base (W x T) L mm Mass g Price €571-201-20 0-150 mm ±0,02 mm 100 x 6 mm 237 207 305.00571-202-20 0-200 mm ±0,02 mm 100 x 6 mm 287 227 360.00571-203-20 0-300 mm ±0,03 mm 100 x 6 mm 403 257 405.00571-204-10 0-450 mm ±0,05 mm 250 x 10 mm 635 1,270 700.00571-205-10 0-600 mm ±0,05 mm 250 x 10 mm 785 1,400 810.00571-206-10 0-750 mm ±0,06 mm 250 x 10 mm 935 1,530 880.00571-207-10 0-1000 mm ±0,07 mm 250 x 10 mm 1,200 1,760 970.00

Inch/Metric

No. Range Accuracy Base (W x T) L mm Mass g Price €571-211-20 0-150 mm/0-6" ±0,02 mm/0.001" 3.93 x 0.23" 237 207 305.00571-212-20 0-200 mm/0-8" ±0,02 mm/0.001" 3.93 x 0.23" 287 227 360.00571-213-10 0-300 mm/0-12" ±0,03 mm/0.0015" 3.93 x 0.23" 403 257 405.00571-214-10 0-450 mm/0-18" ±0,05 mm/0.002" 9.8 x 0.39" 635 1,270 700.00571-215-10 0-600 mm/0-24" ±0,05 mm/0.002" 9.8 x 0.39" 785 1,400 810.00571-216-10 0-750 mm/0-30" ±0,06 mm/0.0025" 9.8 x 0.39" 935 1,530 880.00571-217-10* 0-1000 mm/0-40" ±0,07 mm/0.003" 9.8 x 0.39" 1,200 1,760 970.00

Over 300 mm range models


223

ABSOLUTE Digimatic Depth Gauge

Series 571

IP67 Coolant Proof model• Designed for use in challenging work environments.• Extremely resistant to coolants and lubricants.• The ABSOLUTE feature of this gauge keeps track of the origin point (once set)

for the entire life of the battery. • Base and measuring faces are hardened and micro-lapped.• SPC data output.

571-251-10

Metric

No. Range Accuracy Base (W x T) L mm Mass g Price €571-251-10 0-150 mm ±0,02 mm 100 x 6 mm 237 199 359.00571-252-10 0-200 mm ±0,02 mm 100 x 6 mm 287 219 409.00571-253-10 0-300 mm ±0,03 mm 100 x 6,3 mm 404 357 455.00

Inch/Metric

No. Range Accuracy Base (W x T) L mm Mass g Price €571-261-10* 0-150 mm/0-6" ±0,02 mm/0.001" 3.93 x 0.23" 237 199 359.00571-262-10* 0-200 mm/0-8" ±0,02 mm/0.001" 3.93 x 0.23" 287 219 409.00571-263-10* 0-300 mm/0-12" ±0,03 mm/0.0015" 3.93 x 0.23" 403 404 455.00

Range : 0-150 mm, 0-200 mm

Range : 0-300 mm


Specifications


Repeatability 0,01 mmDigital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7.5 mm (150,

200 mm) 10,2 mm (300 mm)Max. slider speed UnlimitedBattery life approx. 15.000 hours (150, 200 mm)

5.000 hours (300 mm)Delivered In a case including 1 battery





110.00


68.00


77.00


50.00


70.00


78.00

Consumable spares






70.00


78.00

Mounting the interchangeable base


ABSOLUTE Digimatic Depth Gauge Hook Type/Pin Type

Series 571

Functions 571-

254-

10up

to57

1-26

5-10

571-

301-

1057

1-30

2-10

Data outputORIGIN (ABS-Zero)OFFSETAuto power off after 20 min. in non useLow voltage alarm

Specifications

Accuracy ±0,03 mm(excluding quantizing error)

Repeatability 0,01 mmDigital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character Height 7.5 mmRepeatability 0,01 mmMax. slider speed UnlimitedBattery life approx. 15.000 hoursDelivered In a case including 1 battery



switch (1 m)68.00


77.00


92.00


110.00


50.00


70.00


78.00

Consumable spares






70.00


78.00


Series 571

• Direct reading for either measuring surface is obtained by pressing the OFFSET function, which compensates for the 10 mm (or 0.4") width of the hook.

• The ABSOLUTE feature of this gauge keeps track of the origin point (once set) for the entire life of the battery.

571-255-10

571-301-10

Metric Pin TypeNo. Range L mm Mass g Price €571-301-10 0-150 mm 237 207 390.00571-302-10 0-200 mm 287 227 445.00

Metric Hook Type

No.Depthrange

Hookrange

L mm Mass g Price €

571-254-10 10-160 mm 0-150 mm 247 216 390.00571-255-10 10-210 mm 0-200 mm 297 236 445.00

Inch/Metric Hook Type

No.Depthrange

Hookrange

L mm Mass g Price €

571-264-10* 10-160 mm/0.4-6.4" 0-150 mm/0-6" 247 216 390.00571-265-10* 10-210 mm/0.4-8.4" 0-200 mm/0-8" 297 236 445.00

10

7

26100

10

70

16

2-ø5 L

(57.5)

(41.

3)

mm


225

Vernier Depth Gauge

Series 527

• Base and measuring faces are hardened and micro-lapped. • Fine adjustment models are available.

527-101

Metric

No. Range Accuracy Graduation Base (W x T) L mm Mass g Price €527-201 0-150 mm ±0,05 mm 0,05 mm 100 x 6,5 mm 260 240 105.00527-121* 0-150 mm ±0,03 mm 0,02 mm 100 x 6,5 mm 260 215 110.00527-202 0-200 mm ±0,05 mm 0,05 mm 100 x 6,5 mm 310 260 115.00527-122 0-200 mm ±0,03 mm 0,02 mm 100 x 6,5 mm 310 230 120.00527-203 0-300 mm ±0,08 mm 0,05 mm 100 x 6,5 mm 410 300 150.00527-123 0-300 mm ±0,04 mm 0,02 mm 100 x 6,5 mm 410 265 155.00527-204 0-600 mm ±0,10 mm 0,05 mm 250 x 10 mm 800 1,510 630.00527-205 0-1000 mm ±0,15 mm 0,05 mm 250 x 10 mm 1,200 1,880 680.00

Metric With fine adjustmentNo. Range Accuracy Graduation Base (W x T) L mm Mass g Price €527-101 0-150 mm ±0,03 mm 0,02 mm 100 x 6,5 mm 260 280 120.00527-102 0-200 mm ±0,03 mm 0,02 mm 100 x 6,5 mm 310 300 125.00527-103 0-300 mm ±0,04 mm 0,02 mm 100 x 6,5 mm 410 350 160.00527-104 0-600 mm ±0,05 mm 0,02 mm 250 x 10 mm 800 1,510 680.00527-105 0-1000 mm ±0,07 mm 0,02 mm 250 x 10 mm 1,200 1,880 720.00

Inch With fine adjustmentNo. Range Accuracy Graduation Base (W x T) L mm Mass g Price €527-111 0-6" ±0.001" 0.001" 3.93 x 0.25" 260 280 120.00527-112* 0-8" ±0.001" 0.001" 3.93 x 0.25" 310 300 125.00527-113 0-12" ±0.0015" 0.001" 9.8 x 0.39" 410 350 160.00527-114* 0-24" ±0.002" 0.001" 9.8 x 0.39" 800 1,510 680.00527-115* 0-40" ±0.003" 0.001" 9.8 x 0.39" 1,200 1,880 720.00

Over 300 mm range models

Specifications



No. Description Price €900370 Base length 180 mm

for range up to 300 mmThickness 8 mm

50.00


70.00


78.00





70.00


78.00

Up to 300 mm range models



Vernier Depth Gauge Hook TypeSpecifications





50.00


70.00


78.00

06ABZ297 Plastic soft case for150/200 mm depth gauge

25.00

06ADS452 Plastic soft case for300 mm depth gauge

27.00


Series 527

• The end of the beam is hook-shaped to allow depth and thickness measurements of a projected portion or lip in a hole, in addition to standard depth measurement.

• Fine adjustment models are available.

527-401

Metric

No.Depthrange

Hookrange

Accuracy Graduation L mm Mass g Price €

527-401 10-150 mm 0-150 mm ±0,05 mm 0,05 mm 260 240 140.00527-402 10-200 mm 0-200 mm ±0,05 mm 0,05 mm 310 240 150.00527-403 10-300 mm 0-300 mm ±0,08 mm 0,05 mm 410 270 190.00

Metric With fine adjustment

No.Depthrange

Hookrange

Accuracy Graduation L mm Mass g Price €

527-411 10-150 mm 0-150 mm ±0,03 mm 0,02 mm 260 280 170.00527-412 10-200 mm 0-200 mm ±0,03 mm 0,02 mm 310 300 190.00527-413 10-300 mm 0-300 mm ±0,04 mm 0,02 mm 410 350 220.00

L1 = depth-vernier reading / L2 = hook-vernier reading / L3 = (depth-vernier reading) - (hook-vernier reading)


227

Dial Depth Gauge

Series 527

• Easy-to-read dial. • Base and measuring faces are hardened and micro-lapped.• With fine adjustment.

527-301-50

Metric

No. Range Accuracy L mm Mass g Price €527-301-50 0-150 mm ±0,05 mm 260 280 193.00527-302-50 0-200 mm ±0,05 mm 310 300 210.00527-303-50 0-300 mm ±0,08 mm 410 340 235.00

Inch

No. Range Accuracy L mm Mass g Price €527-311-50* 0-6" ±0.001" 260 280 193.00527-312-50* 0-8" ±0.001" 310 300 210.00527-313-50* 0-12" ±0.0015" 410 340 235.00

Specifications

Accuracy Refer to the list of specificationsGraduation 0,05 mm or 0.001"Base size 100 x 6,5 mm (W x T)




50.00


70.00


78.00





70.00


78.00



Tyre Tread Depth GaugeFunctions Series 571Data outputORIGIN (ABS-Zero)ZERO/ABSON/OFFLow voltage alarm

Specifications


Repeatability 0,01 mmDigital step 0,01 mm or 0,01 mm/0.0005"Display LCD, Character height 7,5 mmRepeatability 0,01 mmMax. slider speed unlimitedBattery life approx. 20.000 hoursDelivered Including 1 battery



switch (1 m)36.50


42.00


87.00


97.00

Consumable spares


Series 571

• Specially designed to measure tyre tread depth.• The ABSOLUTE feature of this gauge keeps track of the origin point (once set) for

the entire life of the battery.• SPC data output.

571-100MOT-10

87.2

(60) 16

(3.5

)

ø30.8

ø3

mm

Metric

No. Range Accuracy Mass g Price €571-100MOT-10 0-25 mm ±0,02 mm 160 198.00

Inch/Metric

No. Range Accuracy Mass g Price €571-200MOT-10 0-25 mm/0-1" ±0,02 mm/0.0005" 160 198.00

Functions Series 700ZEROON/OFFLow voltage alarm

Specifications


Digital step 0,1 mm or 0,1 mm/0.001"Delivered Including 1 battery

Consumable spares


Series 700

• Specially designed to measure tyre tread depth.• Plastic construction for lightweight use.

700-104

mm

2960

11383

164

4.3

ø1.5

ø3

13

25

10

Metric


Inch/Metric

No. Range Accuracy Mass g Price €700-105* 0-25 mm/0-1" ±0,2 mm/0.008" 50 51.00


229

Optional Accessories for Depth Gages

Extension bases

• Extension bases are suitable for fitting to depth gauge models up to 0-300 mm (0-12") range. They cannot be attached to 0-600 mm, 0-1000 mm, 0-24" or 0-40" range models.

900372

Metric

No. Size La

mmb

mmNumber of holes Mass g Price €

900370 180 mm 70 mm 55 mm 2 200 50.00900371 260 mm 35 mm 60 mm 5 270 70.00900372 320 mm 70 mm 55 mm 4 345 78.00

Inch

No. Size La

mmb

mmNumber of holes Mass g Price €

900367* 7" 2.76" 2.17" 2 190 50.00900368 10" 1.38" 2.36" 5 280 70.00900369 12" 2.76" 2.17" 4 350 78.00 Attaching the extension base


Documents

ABSOLUTE Digimatic Calipers Pages 168 to 176 ABSOLUTE Digimatic Carbon Fibre Caliper ... · ABSOLUTE Digimatic Calipers Pages 168 to 176 ABSOLUTE Digimatic Carbon Fibre Caliper Pages